Cymbopogon citratus-synthesized gold nanoparticles boost the predation efficiency of copepod Mesocyclops aspericornis against malaria and dengue mosquitoes

Chemical compositions, antioxidant, antimicrobial, and mosquito larvicidal activity of Ocimum americanum L. and Ocimum basilicum L. leaf essential oils

BACKGROUND

Ocimum americanum L. (O. americanum) and Ocimum basilicum L. (O. basilicum) are highly valued aromatic medicinal plants. Their leaves are widely used as spices in traditional cuisine. Their essential oils (EOs) are extensively used in food, cosmetic, and pharmaceutical industries. This study aimed to investigate the main chemical profiles of O. americanum and O. basilicum leaf EOs and assess their effects on antibacterial, antioxidant, and larvicidal properties.

METHODS

EOs were extracted from the leaves of O. basilicum and O. americanum using steam distillation in a Clevenger-type apparatus. The chemical constituents of the EOs were analyzed using gas chromatography-mass spectrometry. 2,2-Diphenyl-1-picrylhydrazyl (DPPH), ferric reducing antioxidant power (FRAP), and metal-chelating techniques were used to assess the free-radical scavenging capability of the oils. The extracted oils were also tested for their antibacterial activities via a disk-diffusion test and the broth microdilution method. Furthermore, the mosquito larvicidal (Aedes aegypti) activity was tested using standard protocols.

RESULTS

Camphor (33.869%), limonene (7.215%), longifolene (6.727%), caryophyllene (5.500%), and isoledene (5.472%) were the major compounds in O. americanum leaf EO. The EO yield was 0.4%, and citral (19.557%), estragole (18.582%) camphor (9.224%) and caryophyllene (3.009%) were the major compounds found among the 37 chemical constituents identified in O. basilicum oil. O. basilicum exhibited a more potent antioxidant activity in DPPH, FRAP, and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid tests than O. americanum. The zones of inhibition and minimum inhibitory concentration of the oils in the microdilution and disk diffusion methods were 8.00 ± 0.19 mm to 26.43 ± 2.19 mm and 3.12-100 µg/mL, respectively. At 400 ppm, O. basilicum and O. americanum EOs demonstrated larvicidal activity, with mortality ratios of 73.60% ± 0.89% and 78.00% ± 1.00%, respectively. Furthermore, after 30 min of exposure to O. americanum and O. basilicum EOs, the larval death rates were 73.60% ± 0.89% and 78.00% ± 1.00%, respectively.

CONCLUSIONS

The findings revealed that the EOs extracted from the leaves of O. basilicum and O. americanum exhibited reasonable antioxidant, antibacterial, and mosquito larvicidal potentials, and can be used as alternative medicine for the treatment of human health and larvicidal mosquito control.

Eco-friendly approaches of zinc oxide and silver nitrate nanoparticles along with plant extracts against Spodoptera litura (Fabricius) under laboratory conditions

The tobacco cutworm (Spodoptera litura) is a widespread pest that inflicts severe damage on various crops, including cotton, tobacco, and vegetables, with a particular preference for solanaceous plants. Traditional control methods often rely heavily on synthetic insecticides, leading to adverse effects on the environment, human health, and the development of insecticide resistance. In light of these challenges, this study explores the potential of nanotechnology as an innovative and sustainable approach to combat this notorious pest. Bioassays were conducted using laboratory-reared 3rd instar S. litura larvae. Eight different plant extracts coated with zinc oxide and silver nitrate nanoparticles were tested, with concentrations in both distilled water and ethanol at 3, 5, and 7 ml. Data were collected at 24, 48, and 72-h intervals. The results revealed that the highest larval mortality, reaching 98%, was observed in the group treated with silver nitrate nanoparticles derived from Cymbopogon citratus. In comparison, the group treated with zinc oxide nanoparticles dissolved in ethanol exhibited a larval mortality rate of 90%. Ethanol is a polar solvent that is widely used in the synthesis of nanocomposites. It is capable of forming strong hydrogen bonds with oxygen atoms, making it a good dispersant for zinc oxide nanoparticles. Additionally, ethanol has a low boiling point and a non-toxic nature, which makes it a safe and effective option for the dispersion of nanoparticles. Notably, the study concluded that silver nanoparticles combined with ethanol exhibited prolonged and more potent toxic effects against S. litura when compared to zinc oxide nanoparticles. Overall, this research underscores the potential of nanotechnology as a valuable component of Integrated Pest Management (IPM) strategies. By integrating nanotechnology into pest management practices, we can promote sustainable and environmentally friendly approaches that benefit both farmers and the ecosystem.

Advanced bioremediation by an amalgamation of nanotechnology and modern artificial intelligence for efficient restoration of crude petroleum oil-contaminated sites: a prospective study

Crude petroleum oil spillage is becoming a global concern for environmental pollution and poses a severe threat to flora and fauna. Bioremediation is considered a clean, eco-friendly, and cost-effective process to achieve success among the several technologies adopted to mitigate fossil fuel pollution. However, due to the hydrophobic and recalcitrant nature of the oily components, they are not readily bioavailable to the biological components for the remediation process. In the last decade, nanoparticle-based restoration of oil-contaminated, owing to several attractive properties, has gained significant momentum. Thus, intertwining nano- and bioremediation can lead to a suitable technology termed 'nanobioremediation' expected to nullify bioremediation's drawbacks. Furthermore, artificial intelligence (AI), an advanced and sophisticated technique that utilizes digital brains or software to perform different tasks, may radically transfer the bioremediation process to develop an efficient, faster, robust, and more accurate method for rehabilitating oil-contaminated systems. The present review outlines the critical issues associated with the conventional bioremediation process. It analyses the significance of the nanobioremediation process in combination with AI to overcome such drawbacks of a traditional approach for efficiently remedying crude petroleum oil-contaminated sites.

Mosquito-Borne Diseases and Their Control Strategies: An Overview Focused on Green Synthesized Plant-Based Metallic Nanoparticles

Mosquitoes act as vectors of pathogens that cause most life-threatening diseases, such as malaria, Dengue, Chikungunya, Yellow fever, Zika, West Nile, Lymphatic filariasis, etc. To reduce the transmission of these mosquito-borne diseases in humans, several chemical, biological, mechanical, and pharmaceutical methods of control are used. However, these different strategies are facing important and timely challenges that include the rapid spread of highly invasive mosquitoes worldwide, the development of resistance in several mosquito species, and the recent outbreaks of novel arthropod-borne viruses (e.g., Dengue, Rift Valley fever, tick-borne encephalitis, West Nile, yellow fever, etc.). Therefore, the development of novel and effective methods of control is urgently needed to manage mosquito vectors. Adapting the principles of nanobiotechnology to mosquito vector control is one of the current approaches. As a single-step, eco-friendly, and biodegradable method that does not require the use of toxic chemicals, the green synthesis of nanoparticles using active toxic agents from plant extracts available since ancient times exhibits antagonistic responses and broad-spectrum target-specific activities against different species of vector mosquitoes. In this article, the current state of knowledge on the different mosquito control strategies in general, and on repellent and mosquitocidal plant-mediated synthesis of nanoparticles in particular, has been reviewed. By doing so, this review may open new doors for research on mosquito-borne diseases.

Biomedical Applications of Biosynthesized Gold Nanoparticles from Cyanobacteria: an Overview

Recently there had been a great interest in biologically synthesized nanoparticles (NPs) as potential therapeutic agents. The shortcomings of conventional non-biological synthesis methods such as generation of toxic byproducts, energy consumptions, and involved cost have shifted the attention towards green syntheses of NPs. Among noble metal NPs, gold nanoparticles (AuNPs) are the most extensively used ones, owing to the unique physicochemical properties. AuNPs have potential therapeutic applications, as those are synthesized with biomolecules as reducing and stabilizing agent(s). The green method of AuNP synthesis is simple, eco-friendly, non-toxic, and cost-effective with the use of renewable energy sources. Among all taxa, cyanobacteria have attracted considerable attention as nano-biofactories, due to cellular uptake of heavy metals from the environment. The cellular bioactive pigments, enzymes, and polysaccharides acted as reducing and coating agents during the process of biosynthesis. However, cyanobacteria-mediated AuNPs have potential biomedical applications, namely, targeted drug delivery, cancer treatment, gene therapy, antimicrobial agent, biosensors, and imaging.

Antibacterial, Antioxidant, Larvicidal and Anticancer Activities of Silver Nanoparticles Synthesized Using Extracts from Fruits of Lagerstroemia speciose and Flowers of Couroupita guianensis

The present study aimed to analyze the in vitro antibacterial, antioxidant, larvicidal and cytotoxicity properties of green synthesized silver nanoparticles (Ag NPs) using aqueous extracts from fruits of Lagerstroemia speciosa and flowers of Couropita guinensis. Synthesized Ag NPs were characterized using UV-DRS, FTIR, XRD, DLS, and High-Resolution SEM and TEM analyses. Absorption wavelength was observed at 386 nm by UV-DRS analysis and energy band gap was calculated as 3.24 eV. FTIR analysis showed the existence of various functional groups in the aqueous extract and in the NPs. DLS analysis showed the stability and particle size of the synthesized Ag NPs. SEM analysis revealed that Ag NPs are in a face centered cubic symmetry and spherical shape with a size of 23.9 nm. TEM analysis showed particle size as 29.90 nm. Ag NPs showed antibacterial activity against both Gram-positive and Gram-negative bacteria. DPPH scavenging trait of Ag NPs was ranging from 20.0 ± 0.2% to 62.4 ± 0.3% and observed significant larvicidal activity (LC50 at 0.742 ppm and LC90 at 6.061 ppm) against Culex quinquefasciatus. In vitro cytotoxicity activity of Ag NPs was also tested against human breast cancer (MCF-7) and fibroblast cells (L-929) and found that cells viabilities are ranging (500 to 25 µg/mL) from 52.5 ± 0.4 to 94.0 ± 0.7% and 53.6 ± 0.5 to 90.1 ± 0.8%, respectively. The synthesized Ag NPs have the potential to be used in the various biomedical applications.

Larvicidal and Antifeedant Effects of Copper Nano-Pesticides against Spodoptera frugiperda (J.E. Smith) and Its Immunological Response

This study aimed to synthesize and evaluate the efficacy of CuO NPs (copper oxide nanoparticles) with varying test concentrations (10−500 ppm) against larvicidal, antifeedant, immunological, and enzymatic activities against larvae of S. frugiperda at 24 h of treatment. Copper nanoparticles were characterized by using a scanning electron microscope (SEM) and energy dispersive X-ray (EDaX) analysis. The EDaX analysis results clearly show that the synthesized copper nanoparticles contain copper as the main element, and the SEM analysis results show nanoparticle sizes ranging from 29 to 45 nm. The CuO NPs showed remarkable larvicidal activity (97%, 94%, and 81% were observed on the 3rd, 4th, and 5th instar larvae, respectively). The CuO NPs produced high antifeedant activity (98.25%, 98.01%, and 98.42%), which was observed on the 3rd, 4th, and 5th instar larvae, respectively. CuO NPs treatment significantly reduced larval hemocyte levels 24 h after treatment; hemocyte counts and sizes changed in the CuO NPs treatment compared to the control. After 24 h of treatment with CuO NPs, the larval acetylcholinesterase enzyme levels decreased with dose-dependent activity. The present findings conclude that CuO NPs cause remarkable larvicidal antifeedant activity and that CuO NPs are effective, pollution-free green nano-insecticides against S. frugiperda.

Green Chemistry Based Synthesis of Zinc Oxide Nanoparticles Using Plant Derivatives of Calotropis gigantea (Giant Milkweed) and Its Biological Applications against Various Bacterial and Fungal Pathogens

Nanotechnology is a burning field of scientific interest for researchers in current era. Diverse plant materials are considered as potential tool in green chemistry based technologies for the synthesis of metal nanoparticles (NPs) to cope with the hazardous effects of synthetic chemicals, leading to severe abiotic climate change issues in today's agriculture. This study aimed to determine the synthesis and characterization of metal-based nanoparticles using extracts of the selected plant Calotropis gigantea and to evaluate the enzyme-inhibition activities and antibacterial and antifungal activity of extracts of metal-based zinc nanoparticles using C. gigantea extracts. The crystal structure and surface morphology were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). C. gigantea was examined for antimicrobial activity against clinical isolates of bacteria and fungi. The water, ethanolic, and acetone extracts of C. gigantea were studied for their antagonistic action against bacterial strains (E. coli, S. aureus, P. multocida, and B. subtilis) and selected fungal strains (A. paracistic, F. solani, A. niger, S. ferrugenium, and R. nigricans). In vitro antimicrobial activity was determined by the disc diffusion method, where C. gigantea wastested for AChE and BChE inhibitory activity using Ellman's methodology. The kinetic analysis was performed by the proverbial Berthelot reaction for urease inhibition. The results showed that out of all the extracts tested, ethanolic and water extracts possessed zinc nanoparticles. These extracts showed the maximum zone of inhibition against F. solani and P. multocida and the lowest against S. ferrugenium and B. subtilis. A potential source of AChE inhibitors is certainly provided by the abundance of plants in nature. Numerous phyto-constituents, such as AChE and BChE inhibitors, have been reported in this communication. Water extract was active and has the potential for in vitro AChE and BChE inhibitory activity. The urease inhibition with flower extracts of C. gigantea revealed zinc nanoparticles in water extracts that competitively inhibited urease enzymes. In the case of cholinesterase enzymes, it was inferred that the water extract and zinc nanoparticles have more potential for inhibition of BChE than AChE and urease inhibition. Furthermore, zinc nanoparticles with water extract are active inthe inhibition of the bacterial strains E. coli, S. aureus, and P. multocida and the fungal strains A. paracistic, F. solani, and A. niger.

Green Synthesis of Endolichenic Fungi Functionalized Silver Nanoparticles: The Role in Antimicrobial, Anti-Cancer, and Mosquitocidal Activities

Green nanotechnology is currently a very crucial and indispensable technology for handling diverse problems regarding the living planet. The concoction of reactive oxygen species (ROS) and biologically synthesized silver nanoparticles (AgNPs) has opened new insights in cancer therapy. The current investigation caters to the concept of the involvement of a novel eco-friendly avenue to produce AgNPs employing the wild endolichenic fungus Talaromyces funiculosus. The synthesized Talaromyces funiculosus–AgNPs were evaluated with the aid of UV visible spectroscopy, dynamic light scattering (DLS), Fourier infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The synthesized Talaromyces funiculosus–AgNPs (TF-AgNPs) exhibited hemo-compatibility as evidenced by a hemolytic assay. Further, they were evaluated for their efficacy against foodborne pathogens Staphylococcus aureus, Streptococcus faecalis, Listeria innocua, and Micrococcus luteus and nosocomial Pseudomonas aeruginosa, Escherichia coli, Vibrio cholerae, and Bacillus subtilis bacterial strains. The synthesized TF-AgNPs displayed cytotoxicity in a dose-dependent manner against MDA-MB-231 breast carcinoma cells and eventually condensed the chromatin material observed through the Hoechst 33342 stain. Subsequent analysis using flow cytometry and fluorescence microscopy provided the inference of a possible role of intracellular ROS (OH⁻, O⁻, H₂O₂, and O₂⁻) radicals in the destruction of mitochondria, DNA machinery, the nucleus, and overall damage of the cellular machinery of breast cancerous cells. The combined effect of predation by the cyclopoid copepod Mesocyclops aspericornis and TF-AgNPS for the larval management of dengue vectors were provided. A promising larval control was evident after the conjunction of both predatory organisms and bio-fabricated nanoparticles. Thus, this study provides a novel, cost-effective, extracellular approach of TF-AgNPs production with hemo-compatible, antioxidant, and antimicrobial efficacy against both human and foodborne pathogens with cytotoxicity (dose dependent) towards MDA-MB-231 breast carcinoma.

Efficacy of metal nanoparticles as a control tool against adult mosquito vectors: A review

Presently, there is a need to develop effective and novel modes of control for mosquitoes, which remain a key driver of infectious disease transmission throughout the world. Control methods for these vectors have historically relied on a limited number of active ingredients (AIs) that have not experienced significant change in usage since the mid-20th century. The resulting development of widespread insecticide resistance has consequently increased the risk for future vector-borne disease outbreaks. Recently, metal nanoparticles have been explored for potential use in mosquito control due to their demonstrated toxicity against mosquitoes at all life stages. However, the majority of studies to date have focused on the larvicidal efficacy of metal nanoparticles with few studies examining their adulticidal potential. In this review, we analyze the current literature on green synthesized metal nanoparticles and their effect on adult mosquitoes.

Green Nano-Biotechnology: A New Sustainable Paradigm to Control Dengue Infection

Dengue is a growing mosquito-borne viral disease prevalent in 128 countries, while 3.9 billion people are at high risk of acquiring the infection. With no specific treatment available, the only way to mitigate the risk of dengue infection is through controlling of vector, i.e., Aedes aegypti. Nanotechnology-based prevention strategies like biopesticides with nanoformulation are now getting popular for preventing dengue fever. Metal nanoparticles (NPs) synthesized by an eco-friendly process, through extracts of medicinal plants have indicated potential anti-dengue applications. Green synthesis of metal NPs is simple, cost-effective, and devoid of hazardous wastes. The recent progress in the phyto-synthesized multifunctional metal NPs for anti-dengue applications has encouraged us to review the available literature and mechanistic aspects of the dengue control using green-synthesized NPs. Furthermore, the molecular bases of the viral inhibition through NPs and the nontarget impacts or hazards with reference to the environmental integrity are discussed in depth. Till date, major focus has been on green synthesis of silver and gold NPs, which need further extension to other innovative composite nanomaterials. Further detailed mechanistic studies are required to critically evaluate the mechanistic insights during the synthesis of the biogenic NPs. Likewise, detailed analysis of the toxicological aspects of NPs and their long-term impact in the environment should be critically assessed.

Safer plant-based nanoparticles for combating antibiotic resistance in bacteria: A comprehensive review on its potential applications, recent advances, and future perspective

BACKGROUND

Antibiotic resistance is one of the current threats to human health, forcing the use of drugs that are more noxious, costlier, and with low efficiency. There are several causes behind antibiotic resistance, including over-prescription of antibiotics in both humans and livestock. In this scenario, researchers are shifting to new alternatives to fight back this concerning situation.

SCOPE AND APPROACH

Nanoparticles have emerged as new tools that can be used to combat deadly bacterial infections directly or indirectly to overcome antibiotic resistance. Although nanoparticles are being used in the pharmaceutical industry, there is a constant concern about their toxicity toward human health because of the involvement of well-known toxic chemicals (i.e., sodium/potassium borohydride) making their use very risky for eukaryotic cells.

KEY FINDINGS AND CONCLUSIONS

Multiple nanoparticle-based approaches to counter bacterial infections, providing crucial insight into the design of elements that play critical roles in the creation of antimicrobial nanotherapeutic drugs, are currently underway. In this context, plant-based nanoparticles will be less toxic than many other forms, which constitute promising candidates to avoid widespread damage to the microbiome associated with current practices. This article aims to review the actual knowledge on plant-based nanoparticle products for antibiotic resistance and the possible replacement of antibiotics to treat multidrug-resistant bacterial infections.

Unique Properties of Surface-Functionalized Nanoparticles for Bio-Application: Functionalization Mechanisms and Importance in Application

This review tries to summarize the purpose of steadily developing surface-functionalized nanoparticles for various bio-applications and represents a fascinating and rapidly growing field of research. Due to their unique properties—such as novel optical, biodegradable, low-toxicity, biocompatibility, size, and highly catalytic features—these materials are considered superior, and it is thus vital to study these systems in a realistic and meaningful way. However, rapid aggregation, oxidation, and other problems are encountered with functionalized nanoparticles, inhibiting their subsequent utilization. Adequate surface modification of nanoparticles with organic and inorganic compounds results in improved physicochemical properties which can overcome these barriers. This review investigates and discusses the iron oxide nanoparticles, gold nanoparticles, platinum nanoparticles, silver nanoparticles, and silica-coated nanoparticles and how their unique properties after fabrication allow for their potential use in a wide range of bio-applications such as nano-based imaging, gene delivery, drug loading, and immunoassays. The different groups of nanoparticles and the advantages of surface functionalization and their applications are highlighted here. In recent years, surface-functionalized nanoparticles have become important materials for a broad range of bio-applications.

Green Metallic Nanoparticles: Biosynthesis to Applications

Current advancements in nanotechnology and nanoscience have resulted in new nanomaterials, which may pose health and environmental risks. Furthermore, several researchers are working to optimize ecologically friendly procedures for creating metal and metal oxide nanoparticles. The primary goal is to decrease the adverse effects of synthetic processes, their accompanying chemicals, and the resulting complexes. Utilizing various biomaterials for nanoparticle preparation is a beneficial approach in green nanotechnology. Furthermore, using the biological qualities of nature through a variety of activities is an excellent way to achieve this goal. Algae, plants, bacteria, and fungus have been employed to make energy-efficient, low-cost, and nontoxic metallic nanoparticles in the last few decades. Despite the environmental advantages of using green chemistry-based biological synthesis over traditional methods as discussed in this article, there are some unresolved issues such as particle size and shape consistency, reproducibility of the synthesis process, and understanding of the mechanisms involved in producing metallic nanoparticles via biological entities. Consequently, there is a need for further research to analyze and comprehend the real biological synthesis-dependent processes. This is currently an untapped hot research topic that required more investment to properly leverage the green manufacturing of metallic nanoparticles through living entities. The review covers such green methods of synthesizing nanoparticles and their utilization in the scientific world.

Insecticide Resistance in Aedes aegypti Varies Seasonally and Geographically in Texas/Mexico Border Cities

Insecticide use is the primary method of attempting to reduce or control the spread of mosquito-borne diseases. Insecticide resistance is a major concern as resistance will limit the efficacy of vector-control efforts. The lower Rio Grande Valley region of South Texas has had autochthonous transmission of multiple mosquito-borne diseases including those caused by dengue virus, chikungunya virus, and Zika virus. However, the current status of mosquito resistance to commonly used pesticides in this region is unknown. In this study, we collected field samples from multiple municipalities in South Texas and assessed resistance using the Centers for Disease Control and Prevention bottle bioassay. All populations exhibited characteristics of resistance, and permethrin was the most effective insecticide with an average mortality rate of 44.78%. Deltamethrin and sumethrin had significantly lower mortality rates of 20.31% and 32.16%, respectively, although neither of these insecticides are commonly used for vector-control activities in this region. Depending on which insecticide was used, there was little significance between each of the 7 cities. Seasonal variation in resistance was observed among the collection sites. Both deltamethrin and sumethrin exhibited an increase in susceptibility over the course of 10 months, while permethrin exhibited a decrease in susceptibility. These data highlight the need for further studies to determine if variations in resistance observed are repeated. The data and future findings may be useful in determining the most effective strategies for pesticide use and rotation.

Predators as Control Agents of Mosquito Larvae in Micro-Reservoirs (Review)

The article reviews predators that are able to control populations of mosquito larvae (Culicidae) in phytotelmata and their anthropogenic analogs. The spectrum of mosquito larva consumers in micro-reservoirs is listed. It includes flatworms, crustaceans, arachnids, insects, vertebrates, and carnivorous plants. The biology and practical use of the two most effective biological control agents, predatory mosquitoes Toxorhynchites and copepods, are considered in more detail. Prospects of invertebrate predators as controlling agents for the mosquito larvae in micro-reservoirs in temperate climate zones are briefly discussed.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1134/S1995082922010138.

Gold Nanoparticles: Biosynthesis and Potential of Biomedical Application

Gold nanoparticles (AuNPs) are extremely promising objects for solving a wide range of biomedical problems. The gold nanoparticles production by biological method ("green synthesis") is eco-friendly and allows minimization of the amount of harmful chemical and toxic byproducts. This review is devoted to the AuNPs biosynthesis peculiarities using various living organisms (bacteria, fungi, algae, and plants). The participation of various biomolecules in the AuNPs synthesis and the influence of size, shapes, and capping agents on the functionalities are described. The proposed action mechanisms on target cells are highlighted. The biological activities of "green" AuNPs (antimicrobial, anticancer, antiviral, etc.) and the possibilities of their further biomedical application are also discussed.

Efficacy and side effects of bio-fabricated sardine fish scale silver nanoparticles against malarial vector Anopheles stephensi

Mosquitoes are a great menace for humankind since they transmit pathogenic organisms causing Malaria, Dengue, Chikungunya, Elephantiasis and Japanese encephalitis. There is an urgent need to discover new and novel biological tools to mitigate mosquito-borne diseases. To develop bioinsecticides through newly developed nanotechnology is another option in the present research scenario. In this study we synthesize and characterize sardine fish scales with silver nitrate by adopting various instrumental techniques such as UV- and FTIR-spectroscopy, energy-dispersive X-ray (EDAX), X-ray diffraction analyses (XRD) and scanning electron microscopy (SEM). Toxicity bioassays were conducted with young developmental stages of mosquito vectors. Significant mortality appeared after different life stages of mosquito vectors (young larval and pupal instars were exposed to the nanomaterials). LC50 values were 13.261 ppm for young first instar larvae and 32.182 ppm for pupae. Feeding and predatory potential of G. affinis, before and after exposure to nanoparticles against mosquito larval (I & II) instars of the mosquitoes showed promising results in laboratory experiments. Feeding potential of mosquito fish without nanoparticle treatment was 79.7% and 70.55% for the first and second instar larval populations respectively. At the nanoparticle-exposed situation the predatory efficiency of mosquitofish was 94.15% and 84.3%, respectively. Antioxidant enzymes like (SOD), (CAT), and (LPO) were estimated in the gill region of sardine fish in control and experimental waters. A significant reduction of egg hatchability was evident after nanoparticle application. It became evident from this study that the nano-fabricated materials provide suitable tools to control the malaria vector Anopheles stephensi in the aquatic phase of its life cycle. This finding suggests an effective novel approach to mosquito control.

Adult damselflies as possible regulators of mosquito populations in urban areas

BACKGROUND

Dragonfly and damselfly larvae have been considered as possible biocontrol agents against young instars of mosquito vectors in urban environments. Yet our knowledge about adult odonate predation against mosquito adults is scarce. We quantified daily and annual predation rates, consumption rates and prey preferences of adult Hetaerina vulnerata male damselflies in an urban park. A focus on predation of mosquito species was provided, quantified their arbovirus (dengue, chikungunya and Zika) infection rates and biting activity.

RESULTS

Foraging times of H. vulnerata overlapped with those of the maximum activity of hematophagous mosquitoes. The most consumed preys were Diptera and Hymenoptera and, in lower quantities, Hemiptera, Coleoptera, Trichoptera, Psocoptera and Neuroptera. Of note, 7% of the diet was represented by hematophagous dipterans, with 2.4% being Aedes aegypti and Aedes albopictus. Prey abundance in the diet coincided with that of the same species in the environment. The arboviral infection rate (dengue, chikungunya and Zika) was 1.6% for A. aegypti and A. albopictus. The total biting rate of these mosquito vectors was 16 bites per person per day, while the annual rate of infectious bites was 93.4.

CONCLUSION

Although 2.4% for both Aedes species seems a low consumption, considering the presence of 12 odonate species at the park, it can be argued that adult odonates may play a relevant role as mosquito vector regulators, therefore impacting the spread of mosquito-borne diseases. Our study outlines the need for further research on the topic of the possible role of adult odonates for mosquito biocontrol. © 2021 Society of Chemical Industry.

Metal Nanoparticles: a Promising Treatment for Viral and Arboviral Infections

Globally, viral diseases continue to pose a significant threat to public health. Recent outbreaks, such as influenza, coronavirus, Ebola, and dengue, have emphasized the urgent need for new antiviral therapeutics. Considerable efforts have focused on developing metal nanoparticles for the treatment of several pathogenic viruses. As a result of these efforts, metal nanoparticles are demonstrating promising antiviral activity against pathogenic surrogates and clinical isolates. This review summarizes the application of metal nanoparticles for the treatment of viral infections. It provides information on synthesis methods, size-related properties, nano-bio-interaction, and immunological effects of metal nanoparticles. This article also addresses critical criteria and considerations for developing clinically translatable nanosized metal particles to treat viral diseases.

Biological Nanofactories: Using Living Forms for Metal Nanoparticle Synthesis

Metal nanoparticles are nanosized entities with dimensions of 1-100 nm that are increasingly in demand due to applications in diverse fields like electronics, sensing, environmental remediation, oil recovery and drug delivery. Metal nanoparticles possess large surface energy and properties different from bulk materials due to their small size, large surface area with free dangling bonds and higher reactivity. High cost and pernicious effects associated with the chemical and physical methods of nanoparticle synthesis are gradually paving the way for biological methods due to their eco-friendly nature. Considering the vast potentiality of microbes and plants as sources, biological synthesis can serve as a green technique for the synthesis of nanoparticles as an alternative to conventional methods. A number of reviews are available on green synthesis of nanoparticles but few have focused on covering the entire biological agents in this process. Therefore present paper describes the use of various living organisms like bacteria, fungi, algae, bryophytes and tracheophytes in the biological synthesis of metal nanoparticles, the mechanisms involved and the advantages associated therein.

A review on plant-mediated synthesis of silver nanoparticles, their characterization and applications

For decades, silver has been used as a non-toxic inorganic antimicrobial agent. Silver has a lot of potential in a variety of biological/chemical applications, particularly in the form of nanoparticles (NPs). Eco-friendly synthesis approach for NPs are becoming more common in nanobiotechnology, and the demand for biological synthesis methods is growing, with the goal of eliminating hazardous and polluting agents. Cultures of bacteria, fungi, and algae, plant extracts, and other biomaterials are commonly used for NP synthesis in the ‘green synthesis’ process. Plant-based green synthesis is a simple, fast, dependable, cost-effective, environmentally sustainable, and one-step method that has a significant advantage over microbial synthesis due to the lengthy process of microbial isolation and pure culture maintenance. In this report, we focussed on phytosynthesis of silver nanoparticles (AgNPs) and their characterization using various techniques such as spectroscopy (UV–vis, FTIR), microscopy (TEM, SEM), X-Ray diffraction (XRD), and other particle analysis. The potential applications of AgNPs in a variety of biological and chemical fields are discussed.

Green-synthesized metal nanoparticles for mosquito control: A systematic review about their toxicity on non-target organisms

Studies capturing the high efficiency of green-synthesized metal nanoparticles (NPs) in targeting mosquito vectors of the world's main infectious diseases suggest the NPs' possible utilization as bio-insecticides. However, it is necessary to confirm that these potential bio-insecticides are not harmful to non-target organisms that are often sympatric and natural enemies of the vectors of these diseases. In this systematic review, we comprehensively analyse the content of 56 publications focused on the potentially deleterious effects of NPs on these non-target organisms. Current research on biosynthesised NPs, characterization, and impact on mosquito vectors and non-target larvivorous organisms is reviewed and critically discussed. Finally, we pinpoint some major challenges that merit future investigation. Plants (87.5%) were mainly used for synthesizing NPs in the studies. NPs were found to be spherical or mainly spherical in shape with a large distribution size. In most of the included studies, NPs showed interesting mosquitocidal activity (LC₅₀ < 50 ppm). Some plant families (e.g., Meliaceae, Poaceae, Lamiaceae) have produced NPs with a particularly high larvicidal and pupicidal activity (LC₅₀ < 10 ppm). Regarding non-target organisms, most of the studies concluded that NPs were safe to them, with boosted predatory activity in NP-treated milieu. In contrast, some studies reported NP-elicited adverse effects (i.e., genotoxic, nuclear, and enzymatic effects) on these non-target organisms. This review outlines the promising mosquitocidal effects of biosynthesized NPs, recognizing that NPs' potential usage is currently limited by the harm NPs are thought pose to non-target organism. It is of utmost importance to investigate green NPs to determine whether laboratory findings have applications in the real world.

Enhancing malaria control using Lagenaria siceraria and its mediated zinc oxide nanoparticles against the vector Anopheles stephensi and its parasite Plasmodium falciparum

In many developing countries, there are certain health problems faced by the public, one among them is Malaria. This tropical disease is mainly caused by Plasmodium falciparum. It is categorized as a disaster to public health, which increases both mortality and morbidity. Numerous drugs are in practice to control this disease and their vectors. Eco-friendly control tools are required to battle against vector of this significant disease. Nanotechnology plays a major role in fighting against malaria. The present paper synthesized Zinc oxide nanoparticles (ZnO NPs) using zinc nitrate via simple green routes with the help of aqueous peel extract of Lagenaria siceraria (L. siceraria). The synthesized ZnO NPs were characterized by various biophysical methods. Moreover, the extract of L. siceraria and their mediated ZnO NPs was experimented against III instar larvae of An. stephensi. The impact of the treatment based on ZnO NPs concerning histology and morphology of mosquito larval was further observed. In the normal laboratory environment, the efficiency of predation of Poeciliareticulata (P. reticulata) against An. Stephensi larvae was found to be 44%, whereas in aqueous L. siceraria extract and its mediated ZnO NPs contaminated environment, P. reticulate showed predation efficiency of about 45.8% and 61.13% against An. Stephensi larva. L. siceraria synthesized ZnO NPs were examined against the Plasmodium falciparum CQ-sensitive strains. The L. siceraria extract and its mediated ZnO NPs showed the cytotoxic effects against HeLa cell lines with an IC₅₀ value of 62.5 µg/mL. This study concludes that L. siceraria peel extract and L. siceraria synthesized ZnO NPs represent a valuable green option to fight against malarial vectors and parasites.

Silica Nanoparticles for Insect Pest Control

To date, control strategies used against insect pest species are based on synthetic insecticide applications. In addition, the efficacy of these treatments could be decreased due to insecticide resistance in insect populations. Also, the irrational use of chemical control strategies has negative consequences of non-target organisms and threatening human health. Designing nanomaterial for pest insect control is a promising alternative to traditional insecticide formulations. In particular, it has been proven that silica nanoparticles have the potential for molecules delivery, release control improvement and also their toxicity as insecticide alone. In this work, we summarized the state of knowledge on silica nanoparticles (SiNPs) used in pest insect management. Besides, aspects of their synthesis, mode of action, and toxic effects on non-target organisms and environment are reviewed.

Climate Change May Restrict the Predation Efficiency of Mesocyclops aspericornis (Copepoda: Cyclopidae) on Aedes aegypti (Diptera: Culicidae) Larvae

(1) Dengue is the most spread mosquito-borne viral disease in the world, and vector control is the only available means to suppress its prevalence, since no effective treatment or vaccine has been developed. A biological control program using copepods that feed on mosquito larvae has been practiced in Vietnam and some other countries, but the application of copepods was not always successful. (2) To understand why the utility of copepods varies, we evaluated the predation efficiency of a copepod species (Mesocyclops aspericornis) on a vector species (Aedes aegypti) by laboratory experiments under different temperatures, nutrition and prey-density conditions. (3) We found that copepod predation reduced intraspecific competition among Aedes larvae and then shortened the survivor’s aquatic life and increased their pupal weight. In addition, the predatory efficiency of copepods was reduced at high temperatures. Furthermore, performance of copepod offspring fell when the density of mosquito larvae was high, probably because mosquito larvae had adverse effects on copepod growth through competition for food resources. (4) These results suggest that the increase in mosquitoes will not be suppressed solely by the application of copepods if the density of mosquito larvae is high or ambient temperature is high. We need to consider additional control methods in order to maintain the efficiency of copepods to suppress mosquito increase.

Cymbopogon Citratus Functionalized Green Synthesis of CuO-Nanoparticles: Novel Prospects as Antibacterial and Antibiofilm Agents

Chemically synthesized copper oxide nanoparticles (CuONPs) involve the generation of toxic products, which narrowed its biological application. Hence, we have developed a one-pot, green method for CuONP production employing the leaf extract of Cymbopogon citratus (CLE). Gas chromatography-mass spectrometry (GC-MS) analysis confirmed the capping of CuONPs by CLE esters (CLE-CuONPs). Fourier-transform infrared (FTIR) showed phenolics, sugars, and proteins mediated nucleation and stability of CLE-CuONPs. X-ray diffraction (XRD) and transmission electron microscopy (TEM) revealed CLE-CuONPs between 11.4 to 14.5 nm. Staphylococcus aureus-1 (MRSA-1), Staphylococcus aureus-2 (MSSA-2) exposed to CLE-CuONPs (1500 µg/mL) showed 51.4%, 32.41% survival, while Escherichia coli-336 (E. coli-336) exposed to 1000 µg/mL CLE-CuONPs showed 45.27% survival. Scanning electron microscopy (SEM) of CLE-CuONPs treated E. coli-336, MSSA-2 and MRSA-1 showed morphological deformations. The biofilm production by E. coli-336 and MRSA-1 also declined to 33.0 ± 3.2% and 49.0 ± 3.1% at 2000 µg/mL of CLE-CuONPs. Atomic absorption spectroscopy (AAS) showed 22.80 ± 2.6%, 19.2 ± 4.2%, and 16.2 ± 3.6% accumulation of Cu2+ in E. coli-336, MSSA-2, and MRSA-1. Overall, the data exhibited excellent antibacterial and antibiofilm efficacies of esters functionalized CLE-CuONPs, indicating its putative application as a novel nano-antibiotic against multi drug resistance (MDR) pathogenic clinical isolates.

Phytochemical analysis of Rhazya stricta extract and its use in fabrication of silver nanoparticles effective against mosquito vectors and microbial pathogens

Worldwide, billions of people are at risk from viruses, parasites and bacteria transmitted by mosquitoes, ticks, fleas and other vectors. Over exploitation of chemical pesticides to overcome the mosquito borne diseases led to detrimental effects on environment and human health. The present research aims to explore bio-fabrication of metal silver nanomaterials using Rhazya stricta extract against deadly mosquito vectors and microbial pathogens. The phytochemical profile of the R. stricta extracts was studied by HPLC-MS and ¹H NMR. Further, confirmation of the bio-fabricated silver nanoparticles (AgNPs) was carried out by UV-vis spectroscopy and characterization through FTIR, TEM, EDX, and XRD analyses. The R. stricta-fabricated AgNPs showed acute toxicity on key mosquito vectors from two different country (India and Kingdom of Saudi Arabia, KSA) strains, notably, with LC₅₀ values of 10.57, 11.89 and 12.78 μg/ml on malarial, dengue and filarial key Indian strains of mosquito vectors, respectively, and 30.66 and 38.39 μg/ml on KSA strains of Aedes aegypti and Culex pipiens, respectively. In mosquito adulticidal activity, R. stricta extract alone exhibited LC₅₀ values ranging from 304.34 to 382.45 μg/ml against Indian strains and from 738.733 to 886.886 against Saudi Arabian strains, while AgNPs LC₅₀ boosted from 9.52 to 12.16 μg/ml and from 30.66 to 38.39 μg/ml, respectively. Moreover, it was noticed that at low concentration the tested AgNPs showed high growth retardation of important pathogenic bacteria such as Bacillus subtilis, Klebsiella pneumoniae and Salmonella typhi with inhibition zone diameters from 11.86 to 22.92 mm. In conclusion, the present study highlighted that R. stricta-fabricated AgNPs could be a lead material for the management of mosquito vector and microbial pathogens control.

Botanical Insecticides in the Twenty-First Century-Fulfilling Their Promise?

Academic interest in plant natural products with insecticidal properties has continued to grow in the past 20 years, while commercialization of new botanical insecticides and market expansion of existing botanicals has lagged considerably behind. Insecticides based on pyrethrum and neem (azadirachtin) continue to be standard bearers in this class of pesticides, but globally, their increased presence is largely a consequence of introduction into new jurisdictions. Insecticides based on plant essential oils are just beginning to emerge as useful plant protectants. Some countries (such as Turkey, Uruguay, the United Arab Emirates, and Australia) have relaxed regulatory requirements for specific plant extracts and oils, while in North America and the European Union, stricter requirements have slowed progress toward commercialization of new products. Botanicals are likely to remain niche products in many agricultural regions and may have the greatest impact in developing countries in tropical regions where the source plants are readily available and conventional products are both expensive and dangerous to users.

Plant-based gold nanoparticles; a comprehensive review of the decade-long research on synthesis, mechanistic aspects and diverse applications

The worldwide focus on research in the field of green nanotechnology has resulted in the environmentally and biologically safe applications of a diversity of nanomaterials. Nanotechnology, in general, implies the production of nanoparticles having different but regular shapes, sizes, and properties. A lot of studies have been conducted on the synthesis of metal nanoparticles through biological, chemical, and physical methods. Owing to its safety, both environmental and in vivo, as well as the ease of synthesis, biogenic routes especially the plant-based synthesis of metal nanoparticles has been preferred as the best strategy. Among the metal nanoparticles, gold nanoparticles are recognized as the most potent, biocompatible and environment-friendly. A decade of research work has attempted the production of gold nanoparticles mediated by different parts of various plants. Further, these nanoparticles have been engineered through modification in the sizes and shapes for attaining enhanced activity and optimal performance in many different applications including biomedical, antimicrobial, diagnostics and environmental applications. This article reviews the fabrication strategies for gold nanoparticles via plant-based routes and highlights the diversity of the applications of these materials in bio-nanotechnology. The review article also highlights the recent developments in the synthesis and optical properties of gold nanoparticles.

Lichen Parmelia sulcata mediated synthesis of gold nanoparticles: an eco-friendly tool against Anopheles stephensi and Aedes aegypti

The gold nanoparticles (AuNPs) were synthesized using the lichen Parmelia sulcata extract (PSE) and characterized. The peaks of ultraviolet spectrophotometer and Fourier transmission infrared confirmed the formation of nanoparticles and the bioactive compounds of the lichen being responsible for reducing and capping of the particles. The face-centered cubic particles were determined by XRD peaks at 111, 200, 220, and 311. The elemental composition and spherical shape of AuNPs were confirmed by energy-dispersive spectroscopy and transmission electron microscopy. The average particle size is 54 nm, and the zeta potential - 18 was ascertained by dynamic light scattering. The potential effect of synthesized nanoparticles and lichen extracts was evaluated for antioxidant bioassays like DPPH and H₂O₂ and tested for mosquitocidal activity against Anopheles stephensi. Results showed that the lichen extract and AuNPs have the capability to scavenge the free radicals with the IC₅₀ values of DPPH being 1020 and 815 μg/ml and the IC₅₀ values of H₂O₂ being 694 and 510 μg/ml, respectively. The mosquitocidal experimental results in this study showed the inhibition of A. stephensi and A. aegypti against the larvae (I-IV instar), pupae, adult, and egg hatching. On comparison, A. stephensi showed effective inhibition than A. aegypti even at low concentration. Based on the obtained results, gold nanoparticles synthesized using PSE showed an excellent mosquitocidal effect against Anopheles stephensi.

Isaria fumosorosea-based zero-valent iron nanoparticles affect the growth and survival of sweet potato whitefly, Bemisia tabaci (Gennadius)

BACKGROUND

Nanoparticles can be used for effective pest management as a combined formulation of metal and some other material that has proven efficacy against a given pest. This study reports the synthesis, characterization and efficacy of Isaria fumosorosea-based zero-valent iron (ZVI) nanoparticles against sweet potato whitefly Bemisia tabaci (Gennadius).

RESULTS

The I. fumosorosea-ZVI nanoparticles showed a characteristic surface plasmon absorption band at 470 nm during UV-visible spectroscopy. The scanning electron micrographs of nanoparticles showed spherical shaped nanoparticles with sizes ranging between 1.71 and 3.0 µm. The EDX analysis showed the characteristic peak of iron at 0.6 and 6.8 KeV. The XRD analysis showed characteristic peaks at 44.72°, 65.070°, 82.339° and 82.65°. The bioassay results indicated that the percentage of larval mortality of B. tabaci challenged with I. fumosorosea ZVI nanoparticles was both concentration and age dependent. Isaria fumosorosea ZVI nanoparticles showed high pathogenicity against second and third instar nymphs, and pupae with LC₅₀ values of 19.17, 26.10 and 37.71 ppm, respectively. The LT₅₀ was lowest for second instar nymphs (3.15 days) and highest for pupae (4.22 days) when inoculated with a concentration of 50 ppm.

CONCLUSION

Isaria fumosorosea ZVI nanoparticles can be an eco-friendly tool for effective B. tabaci management. © 2019 Society of Chemical Industry.

Plant extracts for developing mosquito larvicides: From laboratory to the field, with insights on the modes of action

In the last decades, major research efforts have been done to investigate the insecticidal activity of plant-based products against mosquitoes. This is a modern and timely challenge in parasitology, aimed to reduce the frequent overuse of synthetic pesticides boosting resistance development in mosquitoes and causing serious threats to human health and environment. This review covers the huge amount of literature available on plant extracts tested as mosquito larvicides, particularly aqueous and alcoholic ones, due to their easy formulation in water without using surfactants. We analysed results obtained on more than 400 plant species, outlining that 29 of them have outstanding larvicidal activity (i.e., LC₅₀ values below 10 ppm) against major vectors belonging to the genera Anopheles, Aedes and Culex, among others. Furthermore, synergistic and antagonistic effects between plant extracts and conventional pesticides, as well as among selected plant extracts are discussed. The efficacy of pure compounds isolated from the most effective plant extracts and - when available - their mechanism of action, as well as the impact on non-target species, is also covered. These belong to the following class of secondary metabolites: alkaloids, alkamides, sesquiterpenes, triterpenes, sterols, flavonoids, coumarins, anthraquinones, xanthones, acetogenonins and aliphatics. Their mode of action on mosquito larvae ranges from neurotoxic effects to inhibition of detoxificant enzymes and larval development and/or midugut damages. In the final section, current drawbacks as well as key challenges for future research, including technologies to synergize efficacy and improve stability - thus field performances - of the selected plant extracts, are outlined. Unfortunately, despite the huge amount of laboratory evidences about their efficacy, only a limited number of studies was aimed to validate their efficacy in the field, nor the epidemiological impact potentially arising from these vector control operations has been assessed. This strongly limits the development of commercial mosquito larvicides of botanical origin, at variance with plant-borne products developed in the latest decades to kill or repel other key arthropod species of medical and veterinary importance (e.g., ticks and lice), as well as mosquito adults. Further research on these issues is urgently needed.