Elimination and detoxification of sulfathiazole and sulfamethoxazole assisted by laccase immobilized on porous silica beads

A novel and sustainable composite of L@PSAC for superior removal of pharmaceuticals from different water matrices: Production, characterization, and application

This study endeavors to develop cost-effective environmentally friendly technology for removing harmful residual pharmaceuticals from water and wastewater by utilizing the effective adsorption of pistachio shell (PS) biochar and the degradation potency of laccase immobilized on the biochar (L@PSAC). The carbonatization and activation of the shells were optimized regarding temperature, time, and NH4NO3/PS ratio. This step yielded an optimum PS biochar (PSAC) with the highest porosity and surface area treated at 700 °C for 3 h using an NH4NO3/PS ratio of 3% wt. The immobilization of laccase onto PSAC (L@PSAC) was at its best level at pH 5, 60 U/g, and 30 °C. The optimum L@PSAC maintained a high level of enzyme activity over two months. Almost a complete removal (>99%) of diclofenac, carbamazepine, and ciprofloxacin in Milli-Q (MQ) water and wastewater was achieved. Adsorption was responsible for >80% of the removal and the rest was facilitated by laccase degradation. L@PSAC maintained effective removal of pharmaceuticals of ≥60% for up to six treatment cycles underscoring the promising application of this material for wastewater treatment. These results indicate that activated carbon derived from the pistachio shell could potentially be utilized as a carrier and adsorbent to efficiently remove pharmaceutical compounds. This enzymatic physical elimination approach has the potential to be used on a large-scale.

Use of sawdust for production of ligninolytic enzymes by white-rot fungi and pharmaceutical removal

Use of white-rot fungi for enzyme-based bioremediation of wastewater is of high interest. These fungi produce considerable amounts of extracellular ligninolytic enzymes during solid-state fermentation on lignocellulosic materials such as straw and sawdust. We used pure sawdust colonized by Pleurotus ostreatus, Trametes versicolor, and Ganoderma lucidum for extraction of ligninolytic enzymes in aqueous suspension. Crude enzyme suspensions of the three fungi, with laccase activity range 12-43 U/L and manganese peroxidase activity range 5-55 U/L, were evaluated for degradation of 11 selected pharmaceuticals spiked at environmentally relevant concentrations. Sulfamethoxazole was removed significantly in all treatments. The crude enzyme suspension from P. ostreatus achieved degradation of wider range of pharmaceuticals when the enzyme activity was increased. Brief homogenization of the colonized sawdust was also observed to be favorable, resulting in significant reductions after a short exposure of 5 min. The highest reduction was observed for sulfamethoxazole which was reduced by 84% compared to an autoclaved control without enzyme activity and for trimethoprim which was reduced by 60%. The compounds metoprolol, lidocaine, and venlafaxine were reduced by approximately 30% compared to the control. Overall, this study confirmed the potential of low-cost lignocellulosic material as a substrate for production of enzymes from white-rot fungi. However, monitoring over time in bioreactors revealed a rapid decrease in enzymatic ligninolytic activity.

A sustainable nano-hybrid system of laccase@M-MWCNTs for multifunctional PAHs and PhACs removal from water, wastewater, and lake water

This study examined the use of modified multiwall carbon nanotubes (M-MWCNTs) with immobilized laccase (L@M-MWCNTs) for removing ciprofloxacin (Cip), carbamazepine (Cbz), diclofenac (Dcf), benzo[a]pyrene (Bap), and anthracene (Ant) from different water samples. The synthesized materials were characterized using an array of advanced analytical techniques. The physical immobilization of laccase onto M-MWCNTs was confirmed through Scanning electron microscope (SEM)-dispersive X-ray spectroscopy (EDS) analysis and Brunner-Emmet-Teller (BET) surface area measurements. The specific surface area of M-MWCNTs decreased by 65% upon laccase immobilization. There was also an increase in nitrogen content seen by EDS analysis asserting successful immobilization. The results of Boehm titration and Fourier transform infrared (FTIR) exhibited an increase in acidic functional groups after laccase immobilization. L@M-MWCNTs storage for two months maintained 77.8%, 61.6%, and 57.6% of its initial activity for 4 °C, 25 °C, and 35 °C, respectively. In contrast, the free laccase exhibited 55.3%, 37.5%, and 23.5% of its initial activity at 4 °C, 25 °C, and 35 °C, respectively. MWCNTs improved storability and widened the working temperature range of laccase. The optimum removal conditions of studied pollutants were pH 5, 25 °C, and 1.6 g/L of M-MWCNTs. These parameters led to >90% removal of the targeted pollutants for four treatment cycles of both synthetic water and spiked lake water. L@M-MWCNTs demonstrated consistent removal of >90% for up to five cycles even with spiked wastewater. The adsorption was endothermic and followed Langmuir isotherm. Oxidation, dehydrogenation, hydroxylation, and ring cleavage seem to be the dominant degradation mechanisms.

Construction of a myoglobin scaffold-based biocatalyst for the biodegradation of sulfadiazine and sulfathiazole

Sulfonamide antibiotics, a family of broad-spectrum antibiotic drugs, are increasingly used in aquaculture and are frequently detected in aquatic environments. This poses a potential threat to organisms and may cause the evolution of antimicrobial resistance. Therefore, it is important to develop an environmentally friendly and efficient biocatalyst to degrade sulfonamides (SAs) such as sulfadiazine (SD) and sulfathiazole (ST). Here, we realized the direct and efficient degradation of SD and ST using a hydrogen peroxide-dependent artificial catalytic system based on myoglobin (Mb). The arrangements of amino acids at positions 29, 43, 64, and 68 were found to influence catalytic activity. An L29H/H64D/V68I myoglobin mutant showed the best catalytic efficiency (i.e., kcat/Km = 720.42 M-1 s-1) against SD. Next, mutant H64D/V68I showed the best degradation rate against SD (i.e., 91.45 ± 0.16%). Moreover, L29H/H64D/V68I Mb was found to efficiently catalyze ST oxidation (kcat/Km = 670.08 M-1 s-1), while H64D/V68I had the best degradation rate against ST (i.e., 99.45 ± 0.23%). Our results demonstrate that SAs can be efficiently degraded by artificial peroxygenases constructed using a myoglobin scaffold. This therefore provides a simple and economical method for the biodegradation of SD and ST.

Resource degradation of pharmacy sludge in sub-supercritical system with high degradation rate of 99% and formic acid yield of 32.44

In response to the social goal of 'carbon peak and carbon neutral' in the 14th Five-Year Plan of China, this article used Enrofloxacin (ENR), a common antibiotic, as a model compound to study the method of efficiently degrading pharmaceutical sludge and simultaneously producing Formic Acid (FA), hydrogen storage energy, in a sub-supercritical system. The Ni/SnO2 bimetallic catalyst, which was prepared by the equal volume impregnation method, was used for the liquid phase catalysis. As shown by the results, when the reaction temperature was 330°C, and the addition amount of H2O2 was 0.38 mL, the degradation rate of antibiotics could reach 99% after the reaction proceeded for 6 h. In terms of the resource utilization, the yield of FA could reach up to 32.44%. The resource utilization efficiency with Ni/SnO2 catalyst in sub-/supercritical reaction was about 2.5 times higher than that without catalyst. The kinetic reaction model was established to explore the reaction rate of the antibiotic degradation process. In addition, the Ea and the frequency factor of the reaction were 6455 J/mol and 5.78, respectively. As shown by characterization, the prepared Ni/SnO2 bimetallic catalyst had good activity and has already passed repeated stability experiments. In short, this method has broad application prospects in antibiotic catalysis and resource degradation.

Electrochemical treatment of electroplating wastewater using synthesized GO/TiO2 nanotube electrode

The graphene oxide (GO) deposited TiO₂ nanotube (GO/TiO₂) electrode on a titania plate was prepared using a simple anodization method. The morphological and structural properties of TiO₂ and GO/TiO₂ electrodes have been studied using field emission scanning electron microscopy energy dispersive spectroscopy (FESEM-EDS), X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (UV-vis DRS), Raman spectroscopy, Fourier transform infrared spectra (FT-IR), and X-ray photoelectron spectroscopy (XPS). FESEM-EDS analysis confirmed that the 13.56% wt of GO nanoparticles was formed over the TiO₂ substrate, with the thickness of the wall to be ∼300 nm. The crystallite size of GO/TiO₂, i.e., 19.53 nm, was confirmed by XRD analysis. Analysis of the UV-DRS spectrum showed the bandgap of the synthesized GO/TIO₂ nanotube electrode to be 3.052 eV. Box-Behnken design (BBD) under response surface methodology (RSM) was used to design the experiments. The effect of operating input parameters like pH, current (i), and degradation time (t) on % COD degradation (X₁) and energy consumed (X₂) were also examined. At optimum process parameters, the value of X₁ and X₂ were 57.61% and 15.00 kWh/m³, respectively. Possible intermediates were identified based on the GC-MS data analysis. Scavenger tests showed that •OH radical plays a major role in electroplating effluents degradation. Based on the results, the EO process using GO/TiO₂ electrodes could be considered a promising technique for electroplating effluent degradation due to high degradation efficiency.

Effective biodegradation of chlorophenols, sulfonamides, and their mixtures by bacterial laccase immobilized on chitin

Coexisting multi-pollutants like sulfonamides (SAs) and chlorophenols (CPs) in the ecological environment pose a potential risk to living organisms. The development of a strategy for the effective removal of multiple pollutants has become an urgent need. Herein, we systematically investigated the potential of immobilized bacterial laccase to remove chlorophenols (CPs), sulfonamides (SAs), and their mixtures. Laccase from Bacillus pumilus ZB1 was efficiently immobilized on chitin and its thermal stability, pH stability, and affinity to substrates were improved. Reusability assessment showed the immobilized laccase retained 75.5% of its initial activity after five cycles. The removal efficiency of CPs and SAs by immobilized laccase was significantly improved compared with that of free laccase. In particular, the removal of 2,4-dichlorophenol and 2,4,6-trichlorophenol reached 96.9% and 89.3% respectively within 8 h. The immobilized laccase could remove 63.70% of 2,4-dichlorophenol after four cycles. The degradation pathways of 2,4-dichlorophenol and sulfamethazine were proposed via LC/MS analysis. When the co-pollutants containing 2,4,6-trichlorophenol and sulfamethoxazole, immobilized laccase showed 100% removal of 2,4,6-trichlorophenol and 38.71% removal of sulfamethoxazole simultaneously. Cytotoxicity and phytotoxicity tests indicated that immobilized laccase can alleviate the toxicity of co-pollutants. The results demonstrate that chitin-based laccase immobilization can be an effective strategy for the removal of SAs, CPs, and their co-pollutants.

Simultaneous removal of tetracycline and sulfamethoxazole by laccase-mediated oxidation and ferrate(VI) oxidation: the impact of mediators and metal ions

This study explores the impact of mediators and metal ions of laccase-mediated oxidation and ferrate(VI) oxidation for the simultaneous removal of tetracycline antibiotics (TCs) and sulfonamide antibiotics (SAs) and to effectively remove their antimicrobial activity. The results showed that the antimicrobial activity of tetracycline against Bacillus altitudinis and Escherichia coli was significantly reduced, and the antimicrobial activity of sulfamethoxazole against B. altitudinis disappeared completely after treatment with the laccase-ABTS system. The combination of 6.0 U/mL of laccase and 0.2 mmol/L of ABTS removed 100% of 20.0 mg/L of tetracycline after 1.0 min at pH 6.0 and 25.0 °C, whereas the removal ratio of 20.0 mg/L of sulfamethoxazole was only 6.7%. The Al3+ and Cu2+ ions promoted the oxidation, and the Mn2+ ion decelerated the oxidation of tetracycline and sulfamethoxazole by the laccase-mediator systems. In contrast, the antimicrobial activity of tetracycline against B. altitudinis and E. coli was shown to be significantly reduced, and the sulfamethoxazole still retained high antimicrobial activity against B. altitudinis after treatment with Fe(VI) oxidation. The removal ratio of 20.0 mg/L of tetracycline was 100% after 1.0 min of treatment with 982.0 mg/L of K2FeO4 at pH 6.0 and 25.0 °C, whereas the removal ratio of 20.0 mg/L of sulfamethoxazole was only 49.5%. The Al3+, Cu2+, and Mn2+ ions both decelerated the oxidation of tetracycline and sulfamethoxazole by Fe(VI) oxidation. In general, the combination of the laccase-ABTS system and Fe(VI) was proposed for the simultaneous treatment of TCs and SAs in wastewater and to effectively remove their antimicrobial activity.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Hybridization of laccase with dendrimer-grafted silica-coated hercynite-copper phosphate magnetic hybrid nanoflowers and its application in bioremoval of gemifloxacin

Laccase was successfully hybridized with polyamidoamine (PAMAM) dendrimer-grafted silica-coated hercynite-copper phosphate magnetic hybrid nanoflowers (MHNFs) to increase the catalytic performance of the enzyme and apply in an effective bioremoval of gemifloxacin. For this purpose, the magnetic nanoparticles (MNPs) of hercynite were covered with a silica layer, and the core-shell SiO₂@hercynite was then modified with PAMAM dendrimer to increase the surface area of the carrier for the enzyme attachment. Subsequently, the whole complex was hybridized with laccase and copper phosphate to attain a large surface area (104.3 m² g^-1). The fabricated MHNFs acquired the entrapment yield and efficiency of 90 ± 3% and 66 ± 5%, respectively. The catalytic activity of the fabricated biocatalyst was remained up to 50% after 13 reusability cycles. Approximately 90% of gemifloxacin was removed by the constructed MHNFs after 3 h incubation by adsorption and degradation mechanisms. The biotransformation products were then identified, and degradation pathways were proposed as defluorination, decarboxylation, elimination of a cyclopropyl group, and cleavage of the pyrrolidine moiety. Furthermore, the toxicity of gemifloxacin was effectively diminished against some bacterial strains.

Feasibility and potential of laccase-based enzyme in wastewater treatment through sustainable approach: A review

The worldwide increase in metropolitan cities and rise in industrialization have resulted in the assimilation of hazardous pollutants into the ecosystems. Different physical, chemical and biological techniques have been employed to remove these toxins from water bodies. Several bioprocess applications using microbes and their enzymes are utilized to achieve the goal. Biocatalysts, such as laccases, are employed explicitly to deplete a variety of organic pollutants. However, the degradation of contaminants using biocatalysts has many disadvantages concerning the stability and activity of the enzyme. Hence, they are immobilized on different supports to improve the enzyme kinetics and recyclability. Furthermore, standard wastewater treatment methods are not effective in eliminating all the contaminants. As a result, membrane separation technologies have emerged to overcome the limitations of traditional wastewater treatment methods. Moreover, enzymes immobilized onto these membranes have generated new avenues in wastewater purification technology. This review provides the latest information on laccases from diverse sources, their molecular framework and their mode of action. This report also gives information about various immobilization techniques and the application of membrane bioreactors to eliminate and biotransform hazardous contaminants. In a nutshell, laccases appear to be the most promising biocatalysts for green and cost-efficient wastewater treatment technologies.

Recent advances in the utilization of immobilized laccase for the degradation of phenolic compounds in aqueous solutions: A review

Phenolic compounds such as phenol, bisphenol A, 2,4-dichlorophenol, 2,4-dinitrophenol, 4-chlorophenol and 4-nitrophenol are well known to be highly detrimental to both human and living beings. Thus, it is of critical importance that suitable remediation technologies are developed to effectively remove phenolic compounds from aqueous solutions. Biodegradation utilizing enzymatic technologies is a promising biotechnological solution to sustainably address the pollution in the aquatic environment as caused by phenolic compounds under a defined environmentally optimized strategy and thus should be investigated in great detail. This review aims to present the latest developments in the employment of immobilized laccase for the degradation of phenolic compounds in water. The review first succinctly delineates the fundamentals of biological enzyme degradation along with a critical discussion on the myriad types of laccase immobilization techniques, which include physical adsorption, ionic adsorption, covalent binding, entrapment, and self-immobilization. Then, this review presents the major properties of immobilized laccase, namely pH stability, thermal stability, reusability, and storage stability, as well as the degradation efficiencies and associated kinetic parameters. In addition, the optimization of the immobilized enzyme, specifically on laccase immobilization methods and multi-enzyme system are critically discussed. Finally, pertinent future perspectives are elucidated in order to significantly advance the developments of this research field to a higher level.

Bioremoval and Detoxification of the Anticancer Drug Mitoxantrone Using Immobilized Crude Versatile Peroxidase (icVP/Ba) Bjerkandera adusta CCBAS 930

The aim of this study was to evaluate the biodecolorization and detoxification of the anticancer drug mitoxantron (MTX) by immobilized crude versatile peroxidase of Bjerkandera adusta CCBAS 930 (icVP/Ba). The concentrated crude VP was obtained from B. adusta CCBAS 930 culture on medium with MTX (µg/mL) addition, immobilized with 4% sodium alginate. MTX removal degree (decolorization), levels of phenolic compounds and free radicals were determined during MTX biotransformation. Moreover, the phytotoxicity (Lepidium sativum L.), biotoxicity (multi-species microbial assay, MARA), and genotoxicity (SOS Chromotest) of MTX were evaluated before and after the biological treatment. The use of icVP/Ba (95 U/mL) significantly shortened the bioremoval of 10 µg/mL MTX (95.57% after 72 h). MTX removal by icVP/Ba was correlated with an 85% and 90% decrease in the levels of phenolic compounds and free radicals, respectively. In addition, the use of icVP/Ba contributed to a decrease in the phyto-, bio-, and genotoxicity of MTX. This is the first study to describe the possibility of removing MTX using immobilized crude fungal peroxidase.

Spent waste from edible mushrooms offers innovative strategies for the remediation of persistent organic micropollutants: A review

Urgent and innovative strategies for removal of persistent organic micropollutants (OMPs) in soil, groundwater, and surface water are the need of the hour. OMPs detected in contaminated soils and effluents from wastewater treatment plants (WWTPs) are categorized as environmentally persistent pharmaceutical pollutants (EPPPs), and endocrine disrupting chemicals (EDCs), their admixture could cause serious ecological issues to the non-target species. As complete eradication of OMPs is not possible with the extant conventional WWTPs technology, the inordinate and reckless application of OMPs negatively impacts environmental regenerative and resilience capacity. Therefore, the cardinal focus of this review is the bioremediation of persistent OMPs through efficient application of an agro-waste, i.e. spent mushroom waste (SMW). This innovative, green, long-term strategy embedded in the circular economy, based on state of the art information is comprehensively assessed in this paper. SMW accrues ligninolytic enzymes such as laccase and peroxidase, with efficient mechanism to facilitate biodegradation of recalcitrant organic pollutants. It is vital in this context that future research should address immobilization of such enzymes to overcome quantitative and qualitative issues obstructing their widespread use in biodegradation. Therefore, dual benefit is gained from cultivating critical cash crops like mushrooms to meet the escalating demand for food resources and to aid in biodegradation. Hence, mushroom cultivation has positive environmental, social, and economic implications in developing countries like India.

Novel laccase from Xylaria polymorpha and its efficiency in the biotransformation of pharmaceuticals: Optimization of operational conditions, comparative effect of redox-mediators and toxicity studies

The promising potentials of biocatalytic treatment processes in the removal of micropollutants whilst eliminating health and environmental hazards have attracted great attention in recent years. This current work investigated the biotransformation efficiency of a novel laccase from Xylaria polymorpha (XPL) in comparison with commercial laccases from Trametes versicolor (TVL) and Aspergillus sp. (ASL). XPL exhibited better oxidation performance (95.7%) on AMX than TVL (92.8%) and ASL (90.5%). Optimization of operational conditions revealed that AMX was best oxidized at pH 5, temperature (30 °C), and concentration (1.0 mg L^-1). The investigation carried out to determine the effect of redox mediators revealed violuric acid (VLA) as the best redox mediator. The laccase stability experiments elucidated that the oxidation of AMX is time and mediator concentration dependent with ABTS exhibiting highest deactivation of XPL active sites. Two metabolic products; amoxicillin penilloic acid and 5-hydroxy-6-(4-hydroxyphenyl)- 3-(1,3-thiazolidin-2-yl)piperazin-2-one of AMX were obtained through Liquid Chromatography-Mass Spectrometry (LC-MS) analyses. The toxicity assessments carried out after oxidation of AMX by XPL showed 94% and 97% reduced toxicity on Artemia salina and Aliivibrio fischeri respectively. The study further underscored the efficiency of biocatalytic-mediator technology in the transformation of complex micropollutants into less toxic substances in an eco-friendly way.

Elimination and detoxification of phenanthrene assisted by a laccase from halophile Alkalibacillus almallahensis

Phenanthrene (Phe), a tricyclic Polycyclic Aromatic Hydrocarbon (PAH), is found in high concentrations as a pollutant in various environments. In this study, the removal or (oxidizing) ability of Phe by a laccase from Alkalibacillus almallahensis was investigated. The laccase (12 U mL-1) was able to remove 63% of Phe (50 mg L-1) under optimal conditions of 40 °C, pH 8, 1.5 M NaCl and in the presence of 1 mM HBT as a laccase mediator after a 72 h incubation period. The results for the effect of different solvents, ionic and non-ionic surfactants on the activity of the halophilic laccase towards Phe showed that the addition of these compounds increase removal efficiency and complete enzymatic removal of Phe will achieve in a solution of 5% (v/v) acetone and 1.5% tween 80. The kinetic parameters K m and V max of laccase-catalyzed removal of the substrate were determined as 0.544 mM and 0.882 µmol h-1 mg-1, respectively. A microtoxicity study with respect to the inhibition of algal growth showed a decrease in toxicity of the laccase-treated Phe solution.

Bioremoval and Detoxification of Anthracene by a Halophilic Laccase from Alkalibacillus salilacus

BACKGROUND

Polycyclic Aromatic Hydrocarbons (PAHs) as resistant compounds in the environment has received much attention in recent years due to their adverse effects on ecological health. Among the various methods studying the removal of PAHs, enzyme biotechnology is one of the most effective and appropriate method.

OBJECTIVES

In the present study, a halophilic laccase was used for bioremoval of anthracene in the presence of 1-Hydroxybenzotriazole (HBT).

MATERIALS AND METHODS

Halophilic laccase from Alkalibacillus salilacus was tested for anthracene degradation. Residual concentration of anthracene at various concentrations of NaCl (0‒4 M), incubation time, pH, solvent, and surfactants in the enzymatic reaction mixtures was determined by HPLC.

RESULTS

The maximum removal of substrate was achieved after 72 h at 40 °C, pH 8, and NaCl concentration 1.5 M. Besides, the addition of 1% (v/v) ionic and non-ionic surfactants and 25% (v/v) of various organic solvents increased removal efficiency. The kinetic parameters K_m and V_max of the laccase for removing of anthracene were 0.114 μM and 0.546 μmoL. h.^-1 mg^-1, respectively.

CONCLUSIONS

Laccase showed the maximum removal efficiency of anthracene in the presence of 1-Hydroxybenzotriazole (HBT).

Comparison of chemical and biological degradation of sulfonamides: Solving the mystery of sulfonamide transformation

Sulfonamides (SAs) are widespread in aquatic environments and pose serious environmental risks. The removal efficiencies and degradation mechanisms of SAs in both chemical and biological degradation systems were comprehensively reviewed. Density functional theory (DFT) was utilized to decipher the reaction types and reactive sites of both degradation mechanisms at the electron level. In chemical degradation, the rate of the reactive oxidants to degrade SAs follows the order SO₄•^- ≈ •OH > O₃ > ¹O₂ > ClO₂ ≈ Fe(VI) ≈ HOCl > peroxymonosulfate. pH affects the oxidation-reduction potentials of oxidants, the reactivity of SAs, and the intermolecular force between oxidants and SAs, thereby affecting the chemical degradation efficiencies and mechanisms. In biological degradation, oxidoreductase produced by bacteria, fungi, algae, and plants can degrade SAs. The catalytic activity of the enzyme is affected by the enzyme system, reaction conditions, and type of SAs. Despite the different reaction modes and removal efficiencies of SAs in chemical degradation and biological degradation, the transformation pathways and products show commonalities. Modification of the amino (N¹H₂-) moiety and destruction of sulfonamide bridge (-SO₂-N¹¹H-) moiety are the main pathways for both chemical and biological degradation of SAs. Most oxidants or enzymes can react with the N¹H₂- moiety. Reactions of the -SO₂-N¹¹H- moiety are mainly initiated by the cleavage of S-N bonds for five-membered heterocyclic ring-substituted SAs, and by SO₂ extrusion for six-membered heterocyclic ring-substituted SAs. Chlorine substitution and coupling on the N¹H₂- moiety, hydroxylation of the benzene moiety, oxidation of methyl, and isomerization of the R substituents are the transformation pathways unique to chemical degradation. Formylation/acetylation, glycosylation, pterin conjugation, and deamination of the N¹H₂- moiety are the transformation pathways unique to biological degradation. DFT studies revealed the same reaction types and the same reactive sites of SAs in chemical and biological degradation. Electrophiles are mostly prone to attack the N¹ atom on the amino moiety of neutral SAs and the N¹¹ atom on the sulfonamide bridge moiety of anionic SAs, leading to nitration or electrophilic substitution of the amino moiety and the cleavage of S-N bonds or SO₂ extrusion of the sulfonamide bridge moiety. Reactions on the -SO₂-N¹¹H- moiety eliminate antibacterial activity in the SA degradation process. This review elucidated SA transformation by comparing the chemical and biological degradation of SAs. This could provide theoretical guidance for the development of more efficient and economical treatment technologies for SAs.

Synergistic effects of laccase and pectin on the color changes and functional properties of meat analogs containing beet red pigment

The widening gap between current supply of meat and its future demand has increased the need to produce plant-based meat analogs. Despite ongoing technical developments, one of the unresolved challenges of plant-based meat analogs is to safely and effectively imitate the appearance of raw and cooked animal-based meat, especially the color. This study aimed to develop a more effective and safe browning system for beet red (BR) in plant-based meat analog patties using laccase (LC) and sugar beet pectin (SBP). First, we investigated the synergistic effects of SBP and LC on BR decolorization of meat analog patties. We discovered that the red tones of LC-treated patties containing BR and SBP were remarkably browned after grilling, compared to patties that did not contain SBP. Notably, this color change by LC + SBP was similar to that of beef patties. Additionally, the hardness of LC-treated meat analog patties containing BR was higher than those that did not contain BR. Interestingly, the presence of SBP and LC enhanced the browning reaction and functional properties of meat analogs containing BR. This is the first report on a browning system for meat analogs containing BR using enzymatic methods to the best of our knowledge.

Biocatalytic remediation of pharmaceutically active micropollutants for environmental sustainability

The discharge of an alarming number of recalcitrant pollutants from various industrial activities presents a serious threat to environmental sustainability and ecological integrity. Bioremediation has gained immense interest around the world due to its environmentally friendly and cost-effective nature. In contrast to physical and chemical methods, the use of microbial enzymes, particularly immobilized biocatalysts, has been demonstrated as a versatile approach for the sustainable mitigation of environmental pollution. Considerable attention is now devoted to developing novel enzyme engineering approaches and state-of-the-art bioreactor design for ameliorating the overall bio-catalysis and biodegradation performance of enzymes. This review discusses the contemporary and state of the art technical and scientific progress regarding applying oxidoreductase enzyme-based biocatalytic systems to remediate a vast number of pharmaceutically active compounds from water and wastewater bodies. A comprehensive insight into enzyme immobilization, the role of mediators, bioreactors designing, and transformation products of pharmaceuticals and their associated toxicity is provided. Additional studies are necessary to elucidate enzymatic degradation mechanisms, monitor the toxicity levels of the resulting degraded metabolites and optimize the entire bio-treatment strategy for technical and economical affordability.

Antibiotic residues in environment: antimicrobial resistance development, ecological risks, and bioremediation

The overuse of antibiotics and their disposal without processing are leading the environment and its inhabitants towards a serious health emergency. There is abundance of diverse antibiotic resistance genes and bacteria in environment, which demands immediate attention for the effective removal of antibiotics. There are physical and chemical methods for removal, but the generation of toxic byproducts has directed the efforts towards bioremediation for eco-friendly and sustainable elimination of antibiotics from the environment. Various effective and reliable bioremediation approaches have been used, but still antibiotic residues pose a major global threat. Recent developments in molecular and synthetic biology might offer better solution for engineering of microbe-metabolite biodevices and development of novel strains endowed with desirable properties. This review summarizes the impact of antibiotics on environment, mechanisms of resistance development, and different bioremediation approaches.

Removal of Persistent Sulfamethoxazole and Carbamazepine from Water by Horseradish Peroxidase Encapsulated into Poly(Vinyl Chloride) Electrospun Fibers

Enzymatic conversion of pharmaceutically active ingredients (API), using immobilized enzymes should be considered as a promising industrial tool due to improved reusability and stability of the biocatalysts at harsh process conditions. Therefore, in this study horseradish peroxidase was immobilized into sodium alginate capsules and then trapped into poly(vinyl chloride) electrospun fibers to provide additional enzyme stabilization and protection against the negative effect of harsh process conditions. Due to encapsulation immobilization, 100% of immobilization yield was achieved leading to loading of 25 μg of enzyme in 1 mg of the support. Immobilized in such a way, enzyme showed over 80% activity retention. Further, only slight changes in kinetic parameters of free (K_m = 1.54 mM) and immobilized horseradish peroxidase (K_m = 1.83 mM) were noticed, indicating retention of high catalytic properties and high substrate affinity by encapsulated biocatalyst. Encapsulated horseradish peroxidase was tested in biodegradation of two frequently occurring in wastewater API, sulfamethoxazole (antibiotic) and carbamazepine (anticonvulsant). Over 80% of both pharmaceutics was removed by immobilized enzyme after 24 h of the process from the solution at a concentration of 1 mg/L, under optimal conditions, which were found to be pH 7, temperature 25 °C and 2 mM of H₂O₂. However, even from 10 mg/L solutions, it was possible to remove over 40% of both pharmaceuticals. Finally, the reusability and storage stability study of immobilized horseradish peroxidase showed retention of over 60% of initial activity after 20 days of storage at 4 °C and after 10 repeated catalytic cycles, indicating great practical application potential. By contrast, the free enzyme showed less than 20% of its initial activity after 20 days of storage and exhibited no recycling potential.

Highly effective enzymes immobilization on ceramics: Requirements for supports and enzymes

Enzyme immobilization is a well-known method for the improvement of enzyme reusability and stability. To achieve very high effectiveness of the enzyme immobilization, not only does the method of attachment need to be optimized, but the appropriate support must be chosen. The essential necessities addressed to the support applied for enzyme immobilization can be focused on the material features as well as on the stability and resistances in certain conditions. Ceramic membranes and nanoparticles are the most widespread supports for enzyme immobilization. Hence, the immobilization of enzymes on ceramic membrane and nanoparticles are summarized and discussed. The important properties of the supports are particle size, pore structure, active surface area, volume to surface ratio, type and number of reactive available groups, as well as thermal, mechanical, and chemical stability. The modifiers and the crosslinkers are crucial to the enzyme loading amount, the chemical and physical stability, and the reusability and catalytical activity of the immobilized enzymes. Therefore, the chemical and physical methods of modification of ceramic materials are presented. The most popular and used modifiers (e.g. APTES, CPTES, VTES) as well as activating agents (GA, gelatin, EDC and/or NHS) applied to the grafting process are discussed. Moreover, functional groups of enzymes are presented and discussed since they play important roles in the enzyme immobilization via covalent bonding. The enhanced physical, chemical, and catalytical properties of immobilized enzymes are discussed revealing the positive balance between the effectiveness of the immobilization process, preservation of high enzyme activity, its good stability, and relatively low cost.

Enhanced Efficiency of the Removal of Cytostatic Anthracycline Drugs Using Immobilized Mycelium of Bjerkandera adusta CCBAS 930

The aim of this study was to evaluate the bioremoval of anthracycline antibiotics (daunomycin-DNR, doxorubicin-DOX, and mitoxantrone-MTX) by immobilized mycelium of B. adusta CCBAS 930. The activity of oxidoreductases: versatile peroxidases (VP), superoxide dismutase (SOD), catalase (CAT), and glucose oxidase (GOX), and the levels of phenolic compounds (PhC) and free radicals (SOR) were determined during the biotransformation of anthracyclines by B. adusta strain CCBAS 930. Moreover, the phytotoxicity (Lepidium sativum L.), biotoxicity (MARA assay), and genotoxicity of anthracyclines were evaluated after biological treatment. After 120 h, more than 90% of anthracyclines were removed by the immobilized mycelium of B. adusta CCBAS 930. The effective biotransformation of anthracyclines was correlated with detoxification and reduced genotoxicity.

Roles and applications of enzymes for resistant pollutants removal in wastewater treatment

Resistant pollutants like oil, grease, pharmaceuticals, pesticides, and plastics in wastewater are difficult to be degraded by traditional activated sludge methods. These pollutants are prevalent, posing a great threat to aquatic environments and organisms since they are toxic, resistant to natural biodegradation, and create other serious problems. As a high-efficiency biocatalyst, enzymes are proposed for the treatment of these resistant pollutants. This review focused on the roles and applications of enzymes in wastewater treatment. It discusses the influence of enzyme types and their sources, enzymatic processes in resistant pollutants remediation, identification and ecotoxicity assay of enzymatic transformation products, and typically employed enzymatic wastewater treatment systems. Perspectives on the major challenges and feasible future research directions of enzyme-based wastewater treatment are also proposed.

A comprehensive insight into the application of white rot fungi and their lignocellulolytic enzymes in the removal of organic pollutants

Environmental problems resultant from organic pollutants are a major current challenge for modern societies. White rot fungi (WRF) are well known for their extensive organic compound degradation abilities. The unique oxidative and extracellular ligninolytic systems of WRF that exhibit low substrate specificity, enable them to display a considerable ability to transform or degrade different environmental contaminants. In recent decades, WRF and their ligninolytic enzymes have been widely applied in the removal of polycyclic aromatic hydrocarbons (PAHs), pharmaceutically active compounds (PhACs), endocrine disruptor compounds (EDCs), pesticides, synthetic dyes, and other environmental pollutants, wherein promising results have been achieved. This review focuses on advances in WRF-based bioremediation of organic pollutants over the last 10 years. We comprehensively document the application of WRF and their lignocellulolytic enzymes for removing organic pollutants. Moreover, potential problems and intriguing observations that are worthy of additional research attention are highlighted. Lastly, we discuss trends in WRF-remediation system development and avenues that should be considered to advance research in the field.

Degradation of octylphenol polyethoxylates with a long ethoxylate chain using the laccase-mediated systems

Alkylphenol polyethoxylates (APEOn) are the second-largest category of commercial nonionic surfactants, which are difficult to degrade naturally in the environment. This study examined the degradation of octylphenol polyethoxylate (OPEOn) by laccase and its laccase-mediated systems. The results showed that OPEOn was poorly degraded by laccase alone. 2, 2'-azino-bis [3-ethylbenzothiazoline-6-sulphonic acid] (ABTS), 1-hydroxybenzotriazole (HBT), and 2, 2, 6, 6-tetramethylpiperidine-1-oxyl (TEMPO) were selected as the redox mediators. Experimental results also indicated that 52.4% of the initial OPEOn amount was degraded by laccase in the presence of TEMPO. The degradation efficiency was analyzed using high-performance liquid chromatography. Furthermore, the structural characteristics of the degradation products were measured using matrix-assisted laser desorption/ionization-time of flight mass spectrometry and nuclear magnetic resonance spectroscopy, and it could be found that the laccase-TEMPO system could gradually shorten the ethoxylate chain by oxidizing the primary hydroxyl group of OPEOn, thereby degrading the OPEOn of the macromolecule into small molecules. The maximum of the ion peak distributions of OPEOn decreased from n = 8 finally down to 3. The novel enzymatic system introduced by this study will become a promising alternative method for high-efficiency APEOn conversion and had great potential value in wastewater treatment.

Design of bioreactor based on immobilized laccase on silica-chitosan support for phenol removal in continuous mode

A silica-chitosan support was employed for laccase immobilization. The hybrid support was obtained using calcium ion as linking agent that coordinates silanol and hydroxyl groups of chitosan. The insoluble biocatalyst was then packed in a column and used in a flow system for phenol removal. The immobilized enzyme reactor (IMER) showed a good storage stability (70 % of activity in 70 days) and good reusability (90-50 % of catalytic activity at the 4th reuse in function of chitosan type). The best performance for the phenol removal was obtained with a low molecular weight chitosan from crab shells at pH 5 and with a flow rate of 0.7 mL/min. The apparent Michaelis-Menten (V_max^app, K_m^app) and the inherent (V_max^inh, K_m^inh) constants were also determined to evaluate the influence of the phenol structure on the performance of the system. The enzymatic oxidation of a phenol mixture (4-methylcatechol, catechol, caffeic acid, syringic acid, vanillic acid, p-coumaric acid, and tyrosol) was followed for 21 h in a continuous mode by HPLC. The phenol mixture removal of 90 % was also confirmed by Folin-Ciocalteu assay.

One-step self-assembly of magnetic supramolecular metal-organic coordination functionalized MoS2 complex as nanoenzyme-reactor

In the present study, a kind of magnetic supramolecular metal-organic coordination complex (SMOCC) functionalized MoS₂ was prepared with one-step in aqueous solution for enzyme immobilization. As possessing a protective nanocoating of PDA/PEI/Cu²⁺ (polydopamine: PDA, polyethyleneimine: PEI), the proposed material can provide biocompatible microenvironment and flexible adhesion force on particle interface, which is conductive to loading laccase (170.0 ± 1.8 mg/g) with high activity (93.0 ± 1.1 %). Compared with the free laccase, the immobilized laccase has higher stability in a broader range of pH (3-10), temperature (20-80 °C), storage time (1-18 days) and reusability (1-16 cycles). The removal of carcinogenic persistent organic pollutant malachite green in the water with the immobilized laccase shows a higher efficiency (89.4 ± 1.2 %) than free laccase (16.2 ± 0.2 %). The Fe₃O₄@MoS₂@(PDA/PEI/Cu²⁺) nanocomposites can also be used successfully to immobilize trypsin, lipase and catalase respectively, showing a satisfactory enzyme loading (157.0 ± 0.1 mg/g, 151.6 ± 1.4 mg/g, 162.6 ± 1.6 mg/g, respectively) and activity (95.0 ± 0.5 %, 90.0 ± 0.8 %, 91.0 ± 0.9 %, respectively). The MoS₂ can be replaced by carbon material and similar results can be obtained.

Laccase as an efficacious approach to remove anticancer drugs: A study of doxorubicin degradation, kinetic parameters, and toxicity assessment

The degradation of an anticancer drug by laccase was investigated for the first time, bringing a new approach to treat these hazardous substances through the direct enzymatic application. Degradations of doxorubicin by laccase were performed in different enzymatic concentrations, pH values and temperatures through kinetic studies. The highest enzymatic degradation of doxorubicin was achieved at pH 7 and 30 ºC, which resembles effluent characteristics from wastewater treatment plants. Assays were carried out in different doxorubicin concentrations to comprehend the enzymatic kinetics of degradation. Michaelis-Menten kinetic parameters obtained were maximum velocity obtained (V_max) of 702.8 µg_DOX h^-1 L^-1 and Michaelis-Menten constant (K_M) of 4.05 µM, which showed a good affinity for the substrate. The toxicity was evaluated against L-929 cell line, and the degraded doxorubicin solution did not show a reduction in cell viability in the concentration of 250 µg L^-1. In contrast, the doxorubicin shows a reduction of 27% in cell viability. Furthermore, in the highest tested concentration (1000 µg L^-1), enzymatic degradation reduced in up 41.4% the toxicity of doxorubicin, which indicates laccase degrades doxorubicin to non-toxic compounds. In conclusion, this study provides a new application to laccase since the results showed great potential to remove anticancer drugs from effluents.

Magnetic Metal Organic Framework Immobilized Laccase for Wastewater Decolorization

The laccase enzyme was successfully immobilized over a magnetic amino-functionalized metal–organic framework Fe3O4-NH2@MIL-101(Cr). Different techniques were used for the characterization of the synthesized materials. The Fe3O4-NH2@MIL-101(Cr) laccase showed excellent resistance to high temperatures and low pH levels with a high immobilization capacity and large activity recovery, due to the combination of covalent binding and adsorption advantages. The long-term storage of immobilized laccase for 28 days indicated a retention of 88% of its initial activity, due to the high stability of the immobilized system. Furthermore, a residual activity of 49% was observed at 85 °C. The immobilized laccase was effectively used for the biodegradation of Reactive Black 5 (RB) and Alizarin Red S (AR) dyes in water. The factors affecting the RB and AR degradation using the immobilized laccase (dye concentration, temperature and pH) were investigated to determine the optimum treatment conditions. The optimum conditions for dye removal were a 5 mg/L dye concentration, temperature of 25 °C, and a pH of 4. At the optimum conditions, the biodegradation and sorption-synergistic mechanism of the Fe3O4-NH2@MIL-101(Cr) laccase system caused the total removal of AR and 81% of the RB. Interestingly, the reusability study of this immobilized enzyme up to five cycles indicated the ability to reuse it several times for water treatment.

Advances in laccase-triggered anabolism for biotechnology applications

This is the first comprehensive overview of laccase-triggered anabolism from fundamental theory to biotechnology applications. Laccase is a typical biological oxidordeuctase that induces the one-electronic transfer of diverse substrates for engendering four phenoxy radicals with concomitant reduction of O₂ into 2H₂O. In vivo, laccase can participate in anabolic processes to create multifarious functional biopolymers such as fungal pigments, plant lignins, and insect cuticles, using mono/polyphenols and their derivatives as enzymatic substrates, and is thus conducive to biological tissue morphogenesis and global carbon storage. Exhilaratingly, fungal laccase has high redox potential (E° = 500-800 mV) and thermodynamic efficiency, making it a remarkable candidate for utilization as a versatile catalyst in the green and circular economy. This review elaborates the anabolic mechanisms of laccase in initiating the polymerization of natural phenolic compounds and their derivatives in vivo via radical-based self/cross-coupling. Information is also presented on laccase immobilization engineering that expands the practical application ranges of laccase in biotechnology by improving the enzymatic catalytic activity, stability, and reuse rate. Particularly, advances in biotechnology applications in vitro through fungal laccase-triggered macromolecular biosynthesis may provide a key research direction beneficial to the rational design of green chemistry.

An assessment of Pleurotus ostreatus to remove sulfonamides, and its role as a biofilter based on its own spent mushroom substrate

A double strategy based on the removal of sulfonamide antibiotics by Pleurotus ostreatus and adsorption on spent mushroom substrate was assessed to reclaim contaminated wastewater. P. ostreatus was firstly tested in a liquid medium fortified with five sulfonamides: sulfamethoxazole, sulfadiazine, sulfathiazole, sulfapyridine and sulfamethazine, to evaluate its capacity to remove them and to test for any adverse effects on fungal growth and for any reduction in residual antibiotic activity. P. ostreatus was effective in removing sulfonamides up to 83 to 91% of the applied doses over 14 days. The antibiotic activity of the sulfonamide residues was reduced by 50%. Sulfamethoxazole transformation products by laccase were identified, and the degradation pathway was proposed. In addition, P. ostreatus growth on a semi-solid medium of spent mushroom substrate and malt extract agar was used to develop a biofilter for the removal of sulfonamides from real wastewater. The biofilter was able to remove more than 90% of the sulfonamide concentrations over 24 h by combining adsorption and biodegradation mechanisms.

Synthesis and characterization of an NH4CL-induced Eskanbil activated carbon (EAC) for the removal of penicillin G from contaminated water

Penicillin G (PG) is one of the most widely used antibiotics around the world. The release of PG in an aqueous solution leads to contamination of water resources. This study aimed to determine the efficiency of modified Eskanbil activated carbon for the removal of PG from aqueous solutions. The NH4Cl-induced activated carbon was synthesized by a simple method and used for the degradation of PG in contaminated water. Activated carbon was characterized by Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), and Brunauer-Emmett-Teller (BET) surface area analysis. The four main reaction parameters optimized in this study were pH, time, the concentration of the EAC (Eskanbil Activated Carbon), and initial PG concentration. The synthesized carbon was characterized and the results showed it as a mesoporous material with the BET specific surface area of 1473 m²/g and pore volume of 0.81 cm³/g. The maximum PG adsorption onto EAC was observed at the pH of 6. The PG removal of 33% at an EAC concentration of 0.1 g/L increased to 99.98% at an activated carbon concentration of 0.5 g/L. The isotherm and kinetic studies of PG removal by EAC showed that the Freundlich model (R² > 0.995) and the pseudo-second-order (R² > 0.983) equation represented the best fit with the adsorption data. EAC is recommended as a suitable and cost-efficient adsorbent for removing poisons, pharmaceuticals, and other emerging contaminants from water resources.

Influence of Carrier Structure and Physicochemical Factors on Immobilisation of Fungal Laccase in Terms of Bisphenol A Removal

Laccase from Pleurotus ostreatus was immobilised on porous Purolite® carriers and amino-functionalised ultrafiltration membranes. The results indicated a correlation between the carrier structure and the activity of laccase immobilised thereon. The highest activity was obtained for carriers characterised by a small particle size and a larger pore diameter (the porous carriers with an additional spacer (C2 and C6) and octadecyl methacrylate beads with immobilised laccase activity of 5.34 U/g, 2.12 U/g and 7.43 U/g, respectively. The conditions of immobilisation and storage of immobilised laccase were modified to improve laccase activity in terms of bisphenol A transformation. The highest laccase immobilisation activity was obtained on small bead carriers with a large diameter of pores incubated in 0.1 M phosphate buffer pH 7 and for immobilisation time of 3 h at 22 °C. The immobilised LAC was stable for four weeks maintaining 80–90% of its initial activity in the case of the best C2, C6, and C18 carriers. The immobilised laccase transformed 10 mg/L of BPA in 45% efficiency and decreased its toxicity 3-fold in the Microtox tests. The effectiveness of BPA transformation, and the legitimacy of conducting this process due to the reduction of the toxicity of the resulting reaction products have been demonstrated. Reusability of immobilised LAC has been proven during BPA removal in 10 subsequent batches.

Biodegradation of bisphenol A by the immobilized laccase on some synthesized and modified forms of zeolite Y

Bisphenol A (BPA) is an environmental pollutant with adverse effects on different ecosystems. In this study, immobilized laccase enzymes onto inorganic supports were used to remove BPA. Laccase was successfully immobilized on sodium zeolite Y (NaY) and its modified desilicated (DSY) and dealuminated (DAY) forms. NaY-based supports were instrumentally characterized. The immobilized laccase on NaY (laccase@NaY), desilicated (laccase@DSY), and dealuminated (laccase@DAY) forms showed significant improvement on immobilization yield (IY%) and efficiency (IE%). Laccase@DSY and laccase@NaY showed IY% = 73.18 ± 3.33 % and 46.23 ± 1.81 % and IE% = 94.50 ± 1.86 %, and 74.39 ± 1.41 %, respectively, whereas IY% and IE% for laccase@DAY were achieved as 81.12 ± 1.32 % and 98.56 ± 2.93 %, respectively. The supports also increased the enzyme characteristics such as pH-temperature range, catalytic stability, and reusability. K_m values were 0.73 ± 0.05, 0.26 ± 0.09, 0.31 ± 0.5, and 1.01 ± 0.03 mM for laccase@NaY, laccase@DAY, laccase@DSY, and the free enzyme, respectively. The enzyme demonstrated higher biodegradation ability of bisphenol A upon immobilization on the supports compared to that of the soluble enzyme. A bio-removal yield of 86.7 % was obtained considering three parameters including amount of laccase@DAY (8 U mg^-1), concentration of BPA (0.5 mM), and treatment time (1 h) based on response surface methodology (RSM). Biodegradation metabolites (49 ± 5.8 %) and unconverted BPA (14 ± 5.2 %) were analyzed by gas chromatography-mass spectrometry.

Biocatalytic degradation/redefining "removal" fate of pharmaceutically active compounds and antibiotics in the aquatic environment

Recently, the increasing concentration and persistent appearance of antibiotics traces in the water streams are considered an issue of high concern. In this context, an array of antibiotics has been categorized as pollutants of emerging concern due to their complex and highly stable bioactivity, indiscriminate usage with ultimate release into water bodies, and notable persistence in environmental matrices. Moreover, antibiotics traces containing household sewage/drain waste and pharmaceutical wastewater effluents contain a range of bioactive/toxic organic compounds, inorganic salts, pharmaceutically-active ingredients, or a mixture of all, which possesses negative influences ranging from ecological pollution to damage biodiversity. Moreover, their uncontrolled and undesirable bioaccumulation also poses a potential threat to target and non-target organisms in the environment. Aiming to tackle this issue effectively, various detection, quantification, degradation, and redefining "removal" processes have been proposed and investigated based on physical, chemical, and biological strategies. Though both useful and side effects of antibiotics on humans and animals are usually investigated thoroughly following safety and toxicity measures, however, their direct or indirect environmental impacts are not well reviewed yet. Owing to the considerable research gap, the environmental perfectives of antibiotics traces and their effects on target and non-target populations have now become the topic of research interest. Based on literature evidence, over the past several years, numerous individual studies have been performed and published covering various aspects of antibiotics. However, a comprehensive compilation on enzyme-based degradation of antibiotics is still lacking and requires careful consideration. Hence, this review summarizes up-to-date literature on enzymes as biocatalytic systems, explicitly, free as well as immobilized forms and their effective exploitation for the degradation of various antibiotics traces and other pharmaceutically-active compounds present in the water bodies. It is further envisioned that the enzyme-based strategies, for antibiotics degradation or removal, discussed herein, will help readers for a better understanding of antibiotics persistence in the environment along with the associated risks and removal measures. In summary, the current research thrust presented in this review will additionally evoke researcher to engineer robust and sustainable processes to effectively remediate antibiotics-contaminated environmental matrices.

Analysis of decolorization potential of Myrothecium roridum in the light of its secretome and toxicological studies

To identify the enzymes potentially useful for the decolorization of azo dyes, the secretome of the ascomycetous fungus Myrothecium roridum IM6482 was studied by using a bottom-up proteomic approach. Among the identified proteins, the most promising for dye removal was laccase, which decolorized respectively, 66, 91, 79, and 80% of Acid Blue 113 (AB 113), Acid Red 27 (AR 27), Direct Blue 14 (DB 14), and Acid Orange 7 (AO 7). The degradation of dyes was enhanced at the wide range of pH from 4 to 8. The addition of redox mediators allowed eliminating AB 113 in concentrations up to 400 mg/L and decolorization of the simulated textile effluent. Microbial toxicity and phytotoxicity tests indicated that dyes are converted into low-toxicity metabolites. This is the first insight into the M. roridum secretome, its identification and its application for removal of select azo dyes. Obtained results extended knowledge concerning biodegradative potential of ascomycetous, ligninolytic fungi and will contribute to the improvement of dye removal by fungi.

The Use of Algae and Fungi for Removal of Pharmaceuticals by Bioremediation and Biosorption Processes: A Review

The occurrence and fate of pharmaceuticals in the aquatic environment is recognized as one of the emerging issues in environmental chemistry. Conventional wastewater treatment plants (WWTPs) are not designed to remove pharmaceuticals (and their metabolites) from domestic wastewaters. The treatability of pharmaceutical compounds in WWTPs varies considerably depending on the type of compound since their biodegradability can differ significantly. As a consequence, they may reach the aquatic environment, directly or by leaching of the sludge produced by these facilities. Currently, the technologies under research for the removal of pharmaceuticals, namely membrane technologies and advanced oxidation processes, have high operation costs related to energy and chemical consumption. When chemical reactions are involved, other aspects to consider include the formation of harmful reaction by-products and the management of the toxic sludge produced. Research is needed in order to develop economic and sustainable treatment processes, such as bioremediation and biosorption. The use of low-cost materials, such as biological matrices (e.g., algae and fungi), has advantages such as low capital investment, easy operation, low operation costs, and the non-formation of degradation by-products. An extensive review of existing research on this subject is presented.

Fixed bed adsorption column studies and models for removal of ibuprofen from aqueous solution by strong adsorbent Nano-clay composite

In this study, ibuprofen was removed using a strong nano-clay-composite based on cloisite 15A, PVP and β-cyclodextrin (CD@clay-PVP) adsorbent through a fixed-bed column system. Chemically modified nano-clay was characterized by using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and XRD. Different input situations were evaluated and included adsorbent bed height, initial concentrations, and the impact of the flow rate on the adsorbent. The various mathematical models employed to predict the breakthrough curve and model parameters include Thomas, bed-depth service time (BDST), Yoon-Nelson, and Clark. The characteristics of parameters related to the models were obtained by linear and nonlinear regression to design the process for the columns. Based on error analysis and adsorption conditions, all of the models are identical in describing the adsorption fixed-bed columns.