Inhaled nanoparticles--a current review

Poly(malic acid)-budesonide nanoconjugates embedded in microparticles for lung administration

To improve the therapeutic activity of inhaled glucocorticoids and reduce potential side effects, we designed a formulation combining the advantages of nanoparticles, which have an enhanced uptake by alveolar cells, allow targeted delivery and sustained drug release, as well as limited drug systemic passage, with those of microparticles, which display good alveolar deposition. Herein, a polymer-drug conjugate, poly(malic acid)-budesonide (PMAB), was first synthesized with either 11, 20, 33, or 43 mol% budesonide (drug:polymer from 1:8 to 3:4), the drug creating hydrophobic domains. The obtained conjugates self-assemble into nanoconjugates in water, yielding excellent drug loading of up to 73 wt%, with 80-100 nm diameters. In vitro assays showed that budesonide could be steadily released from the nanoconjugates, and the anti-inflammatory activity was preserved, as evidenced by reduced cytokine production in LPS-activated RAW 264.7 macrophages. Nanoconjugates were then embedded into microparticles through spray-drying with L-leucine, forming nano-embedded microparticles (NEMs). NEMs were produced with an aerodynamic diameter close to 1 µm and a density below 0.1 g.cm-3, indicative of a high alveolar deposition. NEMs spray-dried with the less hydrophobic nanoconjugates, PMAB 1:4, were readily dissolved in simulated lung fluid and were chosen for in vivo experiments to study pharmacokinetics in healthy rats. As it was released in vivo from NEMs, sustained distribution of budesonide was obtained for 48 h in lung tissue, cells, and lining fluid. With high loading rates, modulable release kinetics, and low cytotoxicity, these nanoconjugates delivered by NEMs are promising for the more efficient treatment of pulmonary inflammatory diseases.

A Review on Investigating the Interactions between Nanoparticles and the Pulmonary Surfactant Monolayer with Coarse-Grained Molecular Dynamics Method

Pulmonary drug delivery has garnered significant attention due to its targeted local lung action, minimal toxic side effects, and high drug utilization. However, the physicochemical properties of inhaled nanoparticles (NPs) used as drug carriers can influence their interactions with the pulmonary surfactant (PS) monolayer, potentially altering the fate of the NPs and impairing the biophysical function of the PS monolayer. Thus, the objective of this review is to summarize how the physicochemical properties of NPs affect their interactions with the PS monolayer. Initially, the definition and properties of NPs, as well as the composition and characteristics of the PS monolayer, are introduced. Subsequently, the coarse-grained molecular dynamics (CGMD) simulation method for studying the interactions between NPs and the PS monolayer is presented. Finally, the implications of the hydrophobicity, size, shape, surface charge, surface modification, and aggregation of NPs on their interactions with the PS monolayer and on the composition of biomolecular corona are discussed. In conclusion, gaining a deeper understanding of the effects of the physicochemical properties of NPs on their interactions with the PS monolayer will contribute to the development of safer and more effective nanomedicines for pulmonary drug delivery.

Lattice variation as a function of concentration and grain size in MgO-NiO solid solution system

The study aimed to understand how changes in crystal's size affect the lattice parameters and crystal structure of Mg1-xNixO solid solution for six X values ranging from x = 0 to x = 1. Mg1-xNixO was synthesized via two different wet-chemical techniques: the sol-gel and the microwave hydrothermal method, both followed by calcination at different temperatures of 673, 873, 1073, 1273 and 1473 K. As annealing caused grain growth, the varied temperature range allowed to examine a wide range of grain sizes. The lattice parameters and x values were determined from XRD (X-ray diffraction) peak positions and intensities respectively. The grain size was evaluated by XRD line profile analysis and supported by SEM (scanning electron microscope) observations. At the temperatures of 673 and 873 K grain size was in the nanometric range and from 1073 K and above grain size was in the micrometric range. A non-monotonic lattice variation versus grain size was found for each concentration. When grain size decreased there was a slight contraction, however for grain size in the nanometric range there was a severe lattice expansion. Both lattice parameter changes were explained by two effects acting together: contraction due to surface stress and expansion due to weakening of the ionic bonding at nanocrystalline particles. In this current research study, the lattice parameter was mapped in two dimensions: concentration and grain size. The findings of this study provided valuable insights into the lattice variation in the MgO-NiO solid solution system.

Nanomedicine at the Pulmonary Frontier: Immune-Centric Approaches for Respiratory Disease Treatment

Respiratory diseases (RD) are a group of common ailments with a rapidly increasing global prevalence, posing a significant threat to humanity, especially the elderly population, and imposing a substantial burden on society and the economy. RD represents an unmet medical need that requires the development of viable pharmacotherapies. While various promising strategies have been devised to advance potential treatments for RD, their implementation has been hindered by difficulties in drug delivery, particularly in critically ill patients. Nanotechnology offers innovative solutions for delivering medications to the inflamed organ sites, such as the lungs. Although this approach is enticing, delivering nanomedicine to the lungs presents complex challenges that require sophisticated techniques. In this context, we review the potential of novel nanomedicine-based immunomodulatory strategies that could offer therapeutic benefits in managing this pressing health condition.

Airway epithelial-targeted nanoparticle reverses asthma in inhalation therapy

Despite extensive research on corticosteroids for treating asthma, their short residence time in the lungs has limited their therapeutic effects in vivo. Nanoparticles have been widely investigated for inhaled drug delivery due to their potential benefits in prolonging drugs' residence time in the lungs. However, the retention of nanoparticles may be limited by mucus and ciliated epithelium clearance mechanisms in the airway. Herein, we anchored a neonatal-Fc-receptor-targeted peptide (FcBP) onto "mucus-penetrating" polyethylene glycol (PEG) nanoparticles (PEG-NP). Interestingly, the mucus-permeability of PEG-NP was not impaired by FcBP-functionalization. Moreover, FcBP modification enhanced cellular internalization and exocytosis via specific receptor-mediated processes, which subsequently ameliorated transepithelial transport and prolonged pulmonary retention. Importantly, after loading dexamethasone, FcBP-functionalization could effectively help nanoparticles cross the airway epithelial layer and be endocytosed by inflammatory cells, resulting in a marked decrease in inflammatory cytokines. Finally, FcBP modification significantly enhanced the therapeutic effect of dexamethasone-loaded nanoparticles in asthma mice. This study demonstrates that FcBP-functionalized PEG-NP can overcome multiple obstacles in the airway to prolong the pulmonary retention of drugs, providing a promising strategy for inhalation therapy.

Mapping the evolution of inhaled drug delivery research: Trends, collaborations, and emerging frontiers

Inhaled drug delivery is a unique administration route known for its ability to directly target pulmonary or brain regions, facilitating rapid onset and circumventing the hepatic first-pass effect. To characterize current global trends and provide a visual overview of the latest trends in inhaled drug delivery research, bibliometric analysis of data acquired from the Web of Science Core Collection database was performed via VOSviewer and CiteSpace. Inhaled drug delivery can not only be utilized in respiratory diseases but also has potential in other types of diseases for both fundamental and clinical applications. Overall, we provide an overview of present trends, collaborations, and newly discovered frontiers of inhaled drug delivery.

Zinc oxide nanoparticles induce acute lung injury via oxidative stress-mediated mitochondrial damage and NLRP3 inflammasome activation: In vitro and in vivo studies

The widespread application of zinc oxide nanoparticles (ZnO-NPs) brings convenience to our lives while also renders threats to public health and ecological environment. The lung has been recognized as a primary target of ZnO-NPs, however, the detrimental effects and mechanism of ZnO-NPs on the respiratory system have not been thoroughly characterized so far. To investigate the effect of ZnO-NPs on acute lung injury (ALI), Sprague Dawley rats were intratracheally instilled with ZnO-NPs suspension at doses of 1, 2, and 4 mg/kg/day for 3 consecutive days. Our study revealed that ZnO-NPs induced ALI in rats characterized by increased airway resistance, excessive inflammatory response and lung histological damage. In addition, we identified several molecular biomarkers related to the potential mechanism of ZnO-NP-induced ALI, including oxidative stress, mitochondrial damage, and NLRP3 inflammasome activation. The results of in vitro experiments showed that the viability of A549 cells decreased with the increase in ZnO-NPs concentration. Meanwhile, it was also found that ZnO-NP treatment induced the production of ROS, the decrease in mitochondrial membrane potential and activation of NLRP3 inflammasome in A549 cells. Furthermore, to explore the underlying molecular mechanisms of ZnO-NP-induced ALI, N-acetyl-L-cysteine (a ROS scavenger), Cyclosporin A (an inhibitor for mitochondrial depolarization) and Glibenclamide (an inhibitor for NLRP3 inflammasome activity) were used to pre-treat A549 cells before ZnO-NPs stimulation in the in vitro experiments, respectively. The results from this study suggested that ZnO-NP-induced ROS production triggered the accumulation of damaged mitochondria and assembly of NLRP3 inflammatory complex, leading to maturation and release of IL-1β. Moreover, ZnO-NP-induced NLRP3 inflammasome activation was partly mediated by mitochondrial damage. Taken together, our study suggested that ZnO-NPs induced ALI through oxidative stress-mediated mitochondrial damage and NLRP3 inflammasome activation and provided insight into the mechanisms of ZnO-NPs-induced ALI.

Preparation, Optimization and In Vitro Characterization of Fluticasoneloaded Mixed Micelles Based on Stearic Acid-g-chitosan as a Pulmonary Delivery System

PURPOSE

The primary objective of this study was to optimize formulation variables and investigate the in vitro characteristics of fluticasone propionate (FP)-loaded mixed polymeric micelles, which were composed of depolymerized chitosan-stearic acid copolymer (DC-SA) in combination with either tocopheryl polyethylene glycol succinate or dipalmitoylphosphatidylcholine for pulmonary drug delivery.

METHODS

A D-optimal design was employed for the optimization procedure, considering lipid/ polymer ratio, polymer concentration, drug/ polymer ratio, and lipid type as independent variables. Dependent variables included particle size, polydispersion index, zeta potential, drug encapsulation efficiency, and loading efficiency of the polymeric micelles. Additionally, the nebulization efficacy and cell viability of the optimal FP-loaded DC-SA micellar formulations were evaluated.

RESULTS

The mixed polymeric micelles were successfully prepared with properties falling within the desired ranges, resulting in four optimized formulations. The release of FP from the optimal systems exhibited a sustained release profile over 72 hours, with 70% of the drug still retained within the core of the micelles. The nebulization efficiency of these optimal formulations reached up to 63%, and the fine particle fraction (FPF) ranged from 41% to 48%. Cellular viability assays demonstrated that FP-loaded DC-SA polymeric micelles exhibited lower cytotoxicity than the free drug but were slightly more cytotoxic than empty mixed micelles.

CONCLUSION

In conclusion, this study suggests that DC-SA/ lipid mixed micelles have the potential to serve as effective carriers for nebulizing poorly soluble FP.

Supercritical antisolvent-fluidized bed for the preparation of dry powder inhaler for pulmonary delivery of nanomedicine

The supercritical antisolvent-fluidized bed coating process (SAS-FB) shows great potential as a technique to manufacture dry powder inhaler (DPI) that incorporate nanodrugs onto micronized matrix particles, capitalizing on the merits of both nanoparticle and pulmonary delivery. In this study, naringin (NAR), a pharmacologically active flavonoid with low solubility and in vivo degradation issues, was utilized as a model active pharmaceutical ingredient to construct nanomedicine-based DPI through SAS-FB. It is showed that processed NAR exhibited a near-spherical shape and an amorphous structure with an average size of around 130 nm. Notably, SAS-FB products prepared with different fluidized matrices resulted in varying deposition patterns, particularly when mixed with a coarse lactose to enhance the fine particle fraction (FPF) of the formulations. The FPF was positively associated with specific surface area of the SAS-FB products, while the specific surface area was directly related to surface roughness and particle size. In vitro dissolution studies using simulated lung fluid revealed that the NAR nanoparticles coated on the products were released immediately upon contact with solution, with a cumulative dissolution exceeding 90% within the first minute. Importantly, compared to oral raw NAR, the optimized DPI formulation demonstrated superior in vivo plasmatic and pulmonary AUC0→∞ by 51.33-fold and 104.07-fold respectively in a Sprague-Dawley rat model. Overall, SAS- FB technology provides a practical approach to produce nanomedicine DPI product that combine the benefits of nanoparticles with the aerodynamics properties of inhaled microparticles.

Adjuvant effect of inhaled particulate matter containing free radicals following house-dust mite induction of asthma in mice

INTRODUCTION

Exposures to particulate matter (PM) from combustion sources can exacerbate preexisting asthma. However, the cellular and molecular mechanisms by which PM promotes the exacerbation of asthma remain elusive. We used a house dust mite (HDM)-induced mouse model of asthma to test the hypothesis that inhaled DCB230, which are PM containing environmentally persistent free radicals (EPFRs), will aggravate asthmatic responses.

METHODS

Groups of 8-10-week-old C57BL/6 male mice were exposed to either air or DCB230 aerosols at a concentration of 1.5 mg/m3 4 h/day for 10 days with or without prior HDM-induction of asthma.

RESULTS

Aerosolized DCB230 particles formed small aggregates (30-150 nm). Mice exposed to DCB230 alone showed significantly reduced lung tidal volume, overexpression of the Muc5ac gene, and dysregulation of 4 inflammation related genes, Ccl11, Ccl24, Il-10, and Tpsb2. This suggests DCB230 particles interacted with the lung epithelium inducing mucous hypersecretion and restricting lung volume. In addition to reduced lung tidal volume, compared to respective controls, the HDM + DCB230-exposed group exhibited significantly increased lung tissue damping and up-regulated expression of Muc5ac, indicating that in this model, mucous hypersecretion may be central to pulmonary dysfunction. This group also showed augmented lung eosinophilic inflammation accompanied by an up-regulation of 36 asthma related genes. Twelve of these genes are part of IL-17 signaling, suggesting that this pathway is critical for DCB230 induced toxicity and adjuvant effects in lungs previously exposed to HDM.

CONCLUSION

Our data indicate that inhaled DCB230 can act as an adjuvant, exacerbating asthma through IL-17-mediated responses in a HDM mouse model.

Nanovaccines: A game changing approach in the fight against infectious diseases

The field of nanotechnology has revolutionised global attempts to prevent, treat, and eradicate infectious diseases in the foreseen future. Nanovaccines have proven to be a valuable pawn in this novel technology. Nanovaccines are made up of nanoparticles that are associated with or prepared with components that can stimulate the host's immune system. In addition to their delivery capabilities, the nanocarriers have been demonstrated to possess intrinsic adjuvant properties, working as immune cell stimulators. Thus, nanovaccines have the potential to promote rapid as well as long-lasting humoral and cellular immunity. The nanovaccines have several possible benefits, including site-specific antigen delivery, increased antigen bioavailability, and a diminished adverse effect profile. To avail these benefits, several nanoparticle-based vaccines are being developed, including virus-like particles, liposomes, polymeric nanoparticles, nanogels, lipid nanoparticles, emulsion vaccines, exomes, and inorganic nanoparticles. Inspired by their distinctive properties, researchers are working on the development of nanovaccines for a variety of applications, such as cancer immunotherapy and infectious diseases. Although a few challenges still need to be overcome, such as modulation of the nanoparticle pharmacokinetics to avoid rapid elimination from the bloodstream by the reticuloendothelial system, The future prospects of this technology are also assuring, with multiple options such as personalised vaccines, needle-free formulations, and combination nanovaccines with several promising candidates.

Inhalable pH-responsive DNA tetrahedron nanoplatform for boosting anti-tumor immune responses against metastatic lung cancer

Despite advancements in the treatment of pulmonary cancer, the existence of mucosal barriers in lung still hampered the penetration and diffusion of therapeutic agents and greatly limited the therapeutic benefits. In this work, we reported a novel inhalable pH-responsive tetrahedral DNA nanomachines with simultaneous delivery of immunomodulatory CpG oligonucleotide and PD-L1-targeting antagonistic DNA aptamer (CP@TDN) for efficient treatment of pulmonary metastatic cancer. By precisely controlling the ratios of CpG and PD-L1 aptamer, the obtained CP@TDN could specifically release PD-L1 aptamer to block PD-1/PD-L1 immune checkpoint axis in acidic tumor microenvironment, followed by endocytosis by antigen-presenting cells to generate anti-tumor immune activation and secretion of anti-tumor cytokines. Moreover, inhalation delivery of CP@TDN showed highly-efficient lung deposition with greatly enhanced intratumoral accumulation, ascribing to the DNA tetrahedron-mediated penetration of pulmonary mucosa. Resultantly, CP@TDN could significantly inhibit the growth of metastatic orthotopic lung tumors via the induction of robust antitumor responses. Therefore, our work presents an attractive approach by virtue of biocompatible DNA tetrahedron as the inhalation delivery system for effective treatment of metastatic lung cancer.

Application of Advanced Technologies-Nanotechnology, Genomics Technology, and 3D Printing Technology-In Precision Anesthesia: A Comprehensive Narrative Review

There has been increasing interest and rapid developments in precision medicine, which is a new medical concept and model based on individualized medicine with the joint application of genomics, bioinformatics engineering, and big data science. By applying numerous emerging medical frontier technologies, precision medicine could allow individualized and precise treatment for specific diseases and patients. This article reviews the application and progress of advanced technologies in the anesthesiology field, in which nanotechnology and genomics can provide more personalized anesthesia protocols, while 3D printing can yield more patient-friendly anesthesia supplies and technical training materials to improve the accuracy and efficiency of decision-making in anesthesiology. The objective of this manuscript is to analyze the recent scientific evidence on the application of nanotechnology in anesthesiology. It specifically focuses on nanomedicine, precision medicine, and clinical anesthesia. In addition, it also includes genomics and 3D printing. By studying the current research and advancements in these advanced technologies, this review aims to provide a deeper understanding of the potential impact of these advanced technologies on improving anesthesia techniques, personalized pain management, and advancing precision medicine in the field of anesthesia.

Noninvasive and Microinvasive Nanoscale Drug Delivery Platforms for Hard Tissue Engineering

Bone tissue plays a crucial role in protecting internal organs and providing structural support and locomotion of the body. Treatment of hard tissue defects and medical conditions due to physical injuries, genetic disorders, aging, metabolic syndromes, and infections is more often a complex and drawn out process. Presently, dealing with hard-tissue-based clinical problems is still mostly conducted via surgical interventions. However, advances in nanotechnology over the last decades have led to shifting trends in clinical practice toward noninvasive and microinvasive methods. In this review article, recent advances in the development of nanoscale platforms for bone tissue engineering have been reviewed and critically discussed to provide a comprehensive understanding of the advantages and disadvantages of noninvasive and microinvasive methods for treating medical conditions related to hard tissue regeneration and repair.

Mucoadhesive Rifampicin-Liposomes for the Treatment of Pulmonary Infection by Mycobacterium abscessus: Chitosan or ε-Poly-L-Lysine Decoration

Mycobacterium abscessus (Mabs) is a dangerous non-tubercular mycobacterium responsible for severe pulmonary infections in immunologically vulnerable patients, due to its wide resistance to many different antibiotics which make its therapeutic management extremely difficult. Drug nanocarriers as liposomes may represent a promising delivery strategy against pulmonary Mabs infection, due to the possibility to be aerosolically administrated and to tune their properties in order to increase nebulization resistance and retainment of encapsulated drug. In fact, liposome surface can be modified by decoration with mucoadhesive polymers to enhance its stability, mucus penetration and prolong its residence time in the lung. The aim of this work is to employ Chitosan or ε-poly-L-lysine decoration for improving the properties of a novel liposomes composed by hydrogenated phosphatidyl-choline from soybean (HSPC) and anionic 1,2-Dipalmitoyl-sn-glycero-3-phosphorylglycerol sodium salt (DPPG) able to entrap Rifampicin. A deep physicochemical characterization of polymer-decorated liposomes shows that both polymers improve mucoadhesion without affecting liposome features and Rifampicin entrapment efficiency. Therapeutic activity on Mabs-infected macrophages demonstrates an effective antibacterial effect of ε-poly-L-lysine liposomes with respect to chitosan-decorated ones. Altogether, these results suggest a possible use of ε-PLL liposomes to improve antibiotic delivery in the lung.

Formulation Strategies of Nanosuspensions for Various Administration Routes

Nanosuspensions (NSs), which are nanosized colloidal particle systems, have recently become one of the most interesting substances in nanopharmaceuticals. NSs have high commercial potential because they provide the enhanced solubility and dissolution of low-water-soluble drugs by means of their small particle sizes and large surface areas. In addition, they can alter the pharmacokinetics of the drug and, thus, improve its efficacy and safety. These advantages can be used to enhance the bioavailability of poorly soluble drugs in oral, dermal, parenteral, pulmonary, ocular, or nasal routes for systemic or local effects. Although NSs often consist mainly of pure drugs in aqueous media, they can also contain stabilizers, organic solvents, surfactants, co-surfactants, cryoprotectants, osmogents, and other components. The selection of stabilizer types, such as surfactants or/and polymers, and their ratio are the most critical factors in NS formulations. NSs can be prepared both with top-down methods (wet milling, dry milling, high-pressure homogenization, and co-grinding) and with bottom-up methods (anti-solvent precipitation, liquid emulsion, and sono-precipitation) by research laboratories and pharmaceutical professionals. Nowadays, techniques combining these two technologies are also frequently encountered. NSs can be presented to patients in liquid dosage forms, or post-production processes (freeze drying, spray drying, or spray freezing) can also be applied to transform the liquid state into the solid state for the preparation of different dosage forms such as powders, pellets, tablets, capsules, films, or gels. Thus, in the development of NS formulations, the components/amounts, preparation methods, process parameters/levels, administration routes, and dosage forms must be defined. Moreover, those factors that are the most effective for the intended use should be determined and optimized. This review discusses the effect of the formulation and process parameters on the properties of NSs and highlights the recent advances, novel strategies, and practical considerations relevant to the application of NSs to various administration routes.

Nanoparticle Diffusion in Respiratory Mucus Influenced by Mucociliary Clearance: A Review of Mathematical Modeling

Background: Inhalation and deposition of particles in human airways have attracted considerable attention due to importance of particulate pollutants, transmission of infectious diseases, and therapeutic delivery of drugs at targeted areas. We summarize current state-of-the art research in particle deposition on airway surface liquid (ASL) influenced by mucociliary clearance (MCC) by identifying areas that need further investigation. Methodology: We aim to review focus on governing and constitutive equations describing MCC geometry followed by description of mathematical modeling of ciliary forces, mucus rheology properties, and numerical approaches to solve modified time-dependent Navier-Stokes equations. We also review mathematical modeling of particle deposition in ASL influenced by MCC, particle transport in ASL in terms of Eulerian and Lagrangian approaches, and discuss the corresponding mass transport issues in this layer. Whenever required, numerical predictions are contrasted with the pertinent experimental data. Results: Results indicate that mean mucus and periciliary liquid velocities are strongly influenced by mucus rheological characteristics as well as ciliary abnormalities. However, most of the currently available literature on mucus fiber spacing, ciliary beat frequency, and particle surface chemistry is based on particle deposition on ASL by considering a fixed value of ASL velocity. The effects of real ASL flow regimes on particle deposition in this layer are limited. In addition, no other study is available on modeling nonhomogeneous and viscoelastic characteristics of mucus layer on ASL drug delivery. Conclusion: Simplification of assumptions on governing equations of drug delivery in ASL influenced by MCC leads to imposing some limitations on numerical results.

Localized delivery of nanomedicine and antibodies for combating COVID-19

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has been a major health burden in the world. So far, many strategies have been investigated to control the spread of COVID-19, including social distancing, disinfection protocols, vaccines, and antiviral treatments. Despite the significant achievement, due to the constantly emerging new variants, COVID-19 is still a great challenge to the global healthcare system. It is an urgent demand for the development of new therapeutics and technologies for containing the wild spread of SARS-CoV-2. Inhaled administration is useful for the treatment of lung and respiratory diseases, and enables the drugs to reach the site of action directly with benefits of decreased dose, improved safety, and enhanced patient compliance. Nanotechnology has been extensively applied in the prevention and treatment of COVID-19. In this review, the inhaled nanomedicines and antibodies, as well as intranasal nanodrugs, for the prevention and treatment of COVID-19 are summarized.

Application of Inorganic Nanomaterials in Cultural Heritage Conservation, Risk of Toxicity, and Preventive Measures

Nanotechnology has allowed for significant progress in architectural, artistic, archaeological, or museum heritage conservation for repairing and preventing damages produced by deterioration agents (weathering, contaminants, or biological actions). This review analyzes the current treatments using nanomaterials, including consolidants, biocides, hydrophobic protectives, mechanical resistance improvers, flame-retardants, and multifunctional nanocomposites. Unfortunately, nanomaterials can affect human and animal health, altering the environment. Right now, it is a priority to stop to analyze its advantages and disadvantages. Therefore, the aims are to raise awareness about the nanotoxicity risks during handling and the subsequent environmental exposure to all those directly or indirectly involved in conservation processes. It reports the human-body interaction mechanisms and provides guidelines for preventing or controlling its toxicity, mentioning the current toxicity research of main compounds and emphasizing the need to provide more information about morphological, structural, and specific features that ultimately contribute to understanding their toxicity. It provides information about the current documents of international organizations (European Commission, NIOSH, OECD, Countries Normative) about worker protection, isolation, laboratory ventilation control, and debris management. Furthermore, it reports the qualitative risk assessment methods, management strategies, dose control, and focus/receptor relationship, besides the latest trends of using nanomaterials in masks and gas emissions control devices, discussing their risk of toxicity.

Effect of Nebulized BromAc on Rheology of Artificial Sputum: Relevance to Muco-Obstructive Respiratory Diseases

Respiratory diseases such as cystic fibrosis, COPD, and COVID-19 are difficult to treat owing to viscous secretions in the airways that evade mucocilliary clearance. Earlier studies have shown success with BromAc as a mucolytic agent. Hence, we tested the formulation on two gelatinous airway representative sputa models, to determine whether similar efficacy exist. Sputum lodged in an endotracheal tube was treated to aerosol N-acetylcysteine, bromelain, or their combination (BromAc). After measuring the particle size of aerosolized BromAc, the apparent viscosity was measured using a capillary tube method, whilst the sputum flow was assessed using a 0.5 mL pipette. Further, the concentration of the agents in the sputa after treatment were quantified using chromogenic assays. The interaction index of the different formulations was also determined. Results indicated that the mean particle size of BromAc was suitable for aerosol delivery. Bromelain and N-acetylcysteine affected both the viscosities and pipette flow in the two sputa models. BromAc showed a greater rheological effect on both the sputa models compared to individual agents. Further, a correlation was found between the rheological effects and the concentration of agents in the sputa. The combination index using viscosity measurements showed synergy only with 250 µg/mL bromelain + 20 mg/mL NAC whilst flow speed showed synergy for both combinations of bromelain (125 and 250 µg/mL) with 20 mg/mL NAC. Hence, this study indicates that BromAc may be used as a successful mucolytic for clearing airway congestion caused by thick mucinous immobile secretions.

A ready-to-use dry powder formulation based on protamine nanocarriers for pulmonary drug delivery

The use of oral antibiotic therapy for the treatment of respiratory diseases such as tuberculosis has promoted the appearance of side effects as well as resistance to these treatments. The low solubility, high metabolism, and degradation of drugs such as rifabutin, have led to the use of combined and prolonged therapies, which difficult patient compliance. In this work, we develop inhalable formulations from biomaterials such as protamine to improve the therapeutic effect. Rifabutin-loaded protamine nanocapsules (NCs) were prepared by solvent displacement method and were physico-chemically characterized and evaluated for their dissolution, permeability, stability, cytotoxicity, hemocompatibility, internalization, and aerodynamic characteristics after a spray-drying procedure. Protamine NCs presented a size of around 200 nm, positive surface charge, and drug association up to 54%. They were stable as suspension under storage, as well as in biological media and as a dry powder after lyophilization in the presence of mannitol. Nanocapsules showed a good safety profile and cellular uptake with no tolerogenic effect on macrophages and showed good compatibility with red blood cells. Moreover, the aerodynamic evaluation showed a fine particle fraction deposition up to 30% and a mass median aerodynamic diameter of about 5 µm, suitable for the pulmonary delivery of therapeutics.

Surfactant Proteins SP-B and SP-C in Pulmonary Surfactant Monolayers: Physical Properties Controlled by Specific Protein-Lipid Interactions

The lining of the alveoli is covered by pulmonary surfactant, a complex mixture of surface-active lipids and proteins that enables efficient gas exchange between inhaled air and the circulation. Despite decades of advancements in the study of the pulmonary surfactant, the molecular scale behavior of the surfactant and the inherent role of the number of different lipids and proteins in surfactant behavior are not fully understood. The most important proteins in this complex system are the surfactant proteins SP-B and SP-C. Given this, in this work we performed nonequilibrium all-atom molecular dynamics simulations to study the interplay of SP-B and SP-C with multicomponent lipid monolayers mimicking the pulmonary surfactant in composition. The simulations were complemented by z-scan fluorescence correlation spectroscopy and atomic force microscopy measurements. Our state-of-the-art simulation model reproduces experimental pressure-area isotherms and lateral diffusion coefficients. In agreement with previous research, the inclusion of either SP-B and SP-C increases surface pressure, and our simulations provide a molecular scale explanation for this effect: The proteins display preferential lipid interactions with phosphatidylglycerol, they reside predominantly in the lipid acyl chain region, and they partition into the liquid expanded phase or even induce it in an otherwise packed monolayer. The latter effect is also visible in our atomic force microscopy images. The research done contributes to a better understanding of the roles of specific lipids and proteins in surfactant function, thus helping to develop better synthetic products for surfactant replacement therapy used in the treatment of many fatal lung-related injuries and diseases.

Airway mucus in pulmonary diseases: Muco-adhesive and muco-penetrating particles to overcome the airway mucus barriers

Airway mucus is a complex viscoelastic gel that provides a defensive physical barrier and shields the airway epithelium by trapping inhaled foreign pathogens and facilitating their removal via mucociliary clearance (MCC). In patients with respiratory diseases, such as chronic obstructive pulmonary disease (COPD), cystic fibrosis (CF), non-CF bronchiectasis, and asthma, an increase in crosslinking and physical entanglement of mucin polymers as well as mucus dehydration often alters and typically reduces mucus mesh network pore size, which reduces neutrophil migration, decreases pathogen capture, sustains bacterial infection, and accelerates lung function decline. Conventional aerosol particles containing hydrophobic drugs are rapidly captured and removed by MCC. Therefore, it is critical to design aerosol delivery systems with the appropriate size and surface chemistry that can improve drug retention and absorption with the goal of increased efficacy. Biodegradable muco-adhesive particles (MAPs) and muco-penetrating particles (MPPs) have been engineered to achieve effective pulmonary delivery and extend drug residence time in the lungs. MAPs can be used to target mucus as they get trapped in airway mucus by steric obstruction and/or adhesion. MPPs avoid muco-adhesion and are designed to have a particle size smaller than the mucus network, enhancing lung retention of particles as well as transport to the respiratory epithelial layer and drug absorption. In this review, we aim to provide insight into the composition of airway mucus, rheological characteristics of airway mucus in healthy and diseased subjects, the most recent techniques to study the flow dynamics and particle diffusion in airway mucus (in particular, multiple particle tracking, MPT), and the advancements in engineering MPPs that have contributed to improved airway mucus penetration, lung distribution, and retention.

Dry Powder Inhaler with the technical and practical obstacles, and forthcoming platform strategies

A Dry Powder Inhaler (DPI) is a technique as well as a device used to inhale formulation which is in the form of dry powder, and is inhaled through the nose or mouth. It was developed for the purpose of treating conditions like chronic obstructive pulmonary disease (COPD), Asthma, and even cystic fibrosis etc. The aim of the review is to discuss the different methods of preparation of dry powders along with the characterization of DPI. Here we present the outline of different methods like supercritical fluid extraction (SCF), spray drying, and milling. The review focussed on various devices including single and multi-dose devices used in the DPI. It also highlights on recent advances in the DPI including nano particulate system, siRNA-based medication, liposomes, and pro-liposomes based delivery. In COVID-19 silver nanoparticles-based DPIs provide very prominent results in the infected lungs. Moreover, this review states that the AI-based DPI development provides and improvement in the bioavailability and effectiveness of the drug along with the role of artificial neural networks (ANN). The study also showed that nasally administered drugs (nose to brain) can easily cross the blood-brain barrier (BBB) and enter the central nervous system (CNS) through the olfactory and trigeminal pathway which provides effective CNS concentrations at lower dosage. It is suggested that DPIs not only target respiratory complications but also treat CNS complications too. This review provides support and guides the researcher in the recent development and evaluation of DPI.

Increasing stiffness promotes pulmonary retention of ligand-directed dexamethasone-loaded nanoparticle for enhanced acute lung inflammation therapy

Inhaled nanoparticles (NPs) need to penetrate the bronchial mucosa to deliver drug payloads deeply in the lung for amplified local therapy. However, the bronchial mucociliary barrier eliminates NPs rapidly, which considerably limits their mucosal penetration. In this study, we find that surface ligand modification and stiffness adjustment of NPs contribute to the significantly enhanced bronchial mucosal absorption and pulmonary retention of inhaled drugs. We utilize neonatal Fc receptor ligand (FcBP) to modify the rationally designed low stiffness NPs (Soft-NP) and high stiffness NPs (Stiff-NP) to target bronchial mucosa. In an acute lung inflammation rat model, after intranasal administration with dexamethasone-loaded NPs, Stiff-NP endowed with FcBP displays superior therapeutic effects. The in vitro data demonstrate that the promotion effect of FcBP to bronchial mucosal absorption of Stiff-NP dominates over Soft-NP. This could be attributed to the higher affinity between ligand-receptor when incorporating FcBP on the Stiff-NP surface. Meanwhile, high stiffness modulates more actin filaments aggregation to mediate endocytosis, along with strengthened Ca²⁺ signal to enhance exocytosis. Conclusively, we highlight that FcBP-modified NPs with higher stiffness would be a potential pulmonary drug delivery system.

•

Nanoparticles with higher stiffness and FcBP modification were more prone to accumulate and remain in the lungs.

•

Surface ligand modification on high stiffness NPs contributes to the significantly enhanced pulmonary retention of inhaled drugs.

•

High stiffness and FcBP modification jointly improved the therapeutic efficacy of dexamethasone on acute lung inflammation.

Lung-on-chip microdevices to foster pulmonary drug discovery

Respiratory diseases account for unprecedented mortality owing to a lack of personalized or insufficient therapeutic interventions. Fostering pulmonary research into managing pulmonary threat requires a potential alternative approach that can mimick the in vivo complexities of the human body. The in vitro miniaturized bionic simulation of the lung holds great potential in the quest for a successful therapeutic intervention. This review discusses the emerging roles of lung-on-chip microfluidic simulator devices in fostering translational pulmonary drug discovery and personalized medicine. This review also explicates how the lung-on-chip model emulates the breathing patterns, elasticity, and vascularization of lungs in creating a 3D pulmonary microenvironment.

Aspects of Nanotechnology for COVID-19 Vaccine Development and Its Delivery Applications

Coronavirus, a causative agent of the common cold to a much more complicated disease such as "severe acute respiratory syndrome (SARS-CoV-2), Middle East Respiratory Syndrome (MERS-CoV-2), and Coronavirus Disease 2019 (COVID-19)", is a member of the coronaviridae family and contains a positive-sense single-stranded RNA of 26-32 kilobase pairs. COVID-19 has shown very high mortality and morbidity and imparted a significantly impacted socioeconomic status. There are many variants of SARS-CoV-2 that have originated from the mutation of the genetic material of the original coronavirus. This has raised the demand for efficient treatment/therapy to manage newly emerged SARS-CoV-2 infections successfully. However, different types of vaccines have been developed and administered to patients but need more attention because COVID-19 is not under complete control. In this article, currently developed nanotechnology-based vaccines are explored, such as inactivated virus vaccines, mRNA-based vaccines, DNA-based vaccines, S-protein-based vaccines, virus-vectored vaccines, etc. One of the important aspects of vaccines is their administration inside the host body wherein nanotechnology can play a very crucial role. Currently, more than 26 nanotechnology-based COVID-19 vaccine candidates are in various phases of clinical trials. Nanotechnology is one of the growing fields in drug discovery and drug delivery that can also be used for the tackling of coronavirus. Nanotechnology can be used in various ways to design and develop tools and strategies for detection, diagnosis, and therapeutic and vaccine development to protect against COVID-19. The design of instruments for speedy, precise, and sensitive diagnosis, the fabrication of potent sanitizers, the delivery of extracellular antigenic components or mRNA-based vaccines into human tissues, and the administration of antiretroviral medicines into the organism are nanotechnology-based strategies for COVID-19 management. Herein, we discuss the application of nanotechnology in COVID-19 vaccine development and the challenges and opportunities in this approach.

Alternative lung cell model systems for toxicology testing strategies: Current knowledge and future outlook

Due to the current relevance of pulmonary toxicology (with focus upon air pollution and the inhalation of hazardous materials), it is important to further develop and implement physiologically relevant models of the entire respiratory tract. Lung model development has the aim to create human relevant systems that may replace animal use whilst balancing cost, laborious nature and regulatory ambition. There is an imperative need to move away from rodent models and implement models that mimic the holistic characteristics important in lung function. The purpose of this review is therefore, to describe and identify the various alternative models that are being applied towards assessing the pulmonary toxicology of inhaled substances, as well as the current and potential developments of various advanced models and how they may be applied towards toxicology testing strategies. These models aim to mimic various regions of the lung, as well as implementing different exposure methods with the addition of various physiologically relevent conditions (such as fluid-flow and dynamic movement). There is further progress in the type of models used with focus on the development of lung-on-a-chip technologies and bioprinting, as well as and the optimization of such models to fill current knowledge gaps within toxicology.

Advances and Prospects of Prolamine Corn Protein Zein as Promising Multifunctional Drug Delivery System for Cancer Treatment

Zein is a type of prolamine protein that is derived from corn, and it has been recognized by the US FDA as one of the safest biological materials available. Zein possesses valuable characteristics that have made it a popular choice for the preparation of drug carriers, which can be administered through various routes to improve the therapeutic effect of antitumor drugs. Additionally, zein contains free hydroxyl and amino groups that offer numerous modification sites, enabling it to be hybridized with other materials to create functionalized drug delivery systems. However, despite its potential, the clinical translation of drug-loaded zein-based carriers remains challenging due to insufficient basic research and relatively strong hydrophobicity. In this paper, we aim to systematically introduce the main interactions between loaded drugs and zein, administration routes, and the functionalization of zein-based antitumor drug delivery systems, in order to demonstrate its development potential and promote their further application. We also provide perspectives and future directions for this promising area of research.

Preparation, characterization and properties of three different nanomaterials either alone or loaded with nystatin or fluconazole antifungals

Engineered nanoparticles have enabled the development of novel uses, particularly in disease management. In this investigation, we synthesized and studied three distinct nanomaterials: solid lipid nanoparticles (SLNPs), chitosan nanoparticles (CSNPs), and carbon nanotubes (CNTs), either alone or loaded with two antifungals, nystatin, and fluconazole. The purpose of this study is to investigate the different properties of the produced nanomaterials, either alone or in combination with antifungals. Drug release studies revealed that about 55% from SLNPs, 43% from CSNPs and 97% from CNTs of nystatin drug were released at the longest time point assessed (12 h). In addition, about 89% from SLNPs, 84% from CSNPs and 81% from CNTs of fluconazole drug were released at the longest time point assessed (12 h). This research will expand the understanding of nanomaterials as a viable technique for the management of different fungal diseases that harm several agricultural crops.

Could the Lung Be a Gateway for Amphotericin B to Attack the Army of Fungi?

Fungal diseases are a significant cause of morbidity and mortality worldwide, primarily affecting immunocompromised patients. Aspergillus, Pneumocystis, and Cryptococcus are opportunistic fungi and may cause severe lung disease. They can develop mechanisms to evade the host immune system and colonize or cause lung disease. Current fungal infection treatments constitute a few classes of antifungal drugs with significant fungi resistance development. Amphotericin B (AmB) has a broad-spectrum antifungal effect with a low incidence of resistance. However, AmB is a highly lipophilic antifungal with low solubility and permeability and is unstable in light, heat, and oxygen. Due to the difficulty of achieving adequate concentrations of AmB in the lung by intravenous administration and seeking to minimize adverse effects, nebulized AmB has been used. The pulmonary pathway has advantages such as its rapid onset of action, low metabolic activity at the site of action, ability to avoid first-pass hepatic metabolism, lower risk of adverse effects, and thin thickness of the alveolar epithelium. This paper presented different strategies for pulmonary AmB delivery, detailing the potential of nanoformulation and hoping to foster research in the field. Our finds indicate that despite an optimistic scenario for the pulmonary formulation of AmB based on the encouraging results discussed here, there is still no product registration on the FDA nor any clinical trial undergoing ClinicalTrial.gov.

Penetration and translocation of functional inorganic nanomaterials into biological barriers

With excellent physicochemical properties, inorganic nanomaterials (INMs) have exhibited a series of attractive applications in biomedical fields. Biological barriers prevent successful delivery of nanomedicine in living systems that limits the development of nanomedicine especially for sufficient delivery of drugs and effective therapy. Numerous researches have focused on overcoming these biological barriers and homogeneity of organisms to enhance therapeutic efficacy, however, most of these strategies fail to resolve these challenges. In this review, we present the latest progress about how INMs interact with biological barriers and penetrate these barriers. We also summarize that both native structure and components of biological barriers and physicochemical properties of INMs contributed to the penetration capacity. Knowledge about the relationship between INMs structure and penetration capacity will guide the design and application of functional and efficient nanomedicine in the future.

Nanovaccines against Viral Infectious Diseases

Infectious diseases have always been regarded as one of the greatest global threats for the last century. The current ongoing COVID-19 pandemic caused by SARS-CoV-2 is living proof that the world is still threatened by emerging infectious diseases. Morbidity and mortality rates of diseases caused by Coronavirus have inflicted devastating social and economic outcomes. Undoubtedly, vaccination is the most effective method of eradicating infections and infectious diseases that have been eradicated by vaccinations, including Smallpox and Polio. To date, next-generation vaccine candidates with novel platforms are being approved for emergency use, such as the mRNA and viral vectored vaccines against SARS-CoV-2. Nanoparticle based vaccines are the perfect candidates as they demonstrated targeted antigen delivery, improved antigen presentation, and sustained antigen release while providing self-adjuvanting functions to stimulate potent immune responses. In this review, we discussed most of the recent nanovaccines that have found success in immunization and challenge studies in animal models in comparison with their naked vaccine counterparts. Nanovaccines that are currently in clinical trials are also reviewed.

Nanoparticle-Based Inhalation Therapy for Pulmonary Diseases

The lung is exposed to various pollutants and is the primary site for the onset of various diseases, including infections, allergies, and cancers. One possible treatment approach for such pulmonary diseases involves direct administration of therapeutics to the lung so as to maintain the topical concentration of the drug. Particles with nanoscale diameters tend to reach the pulmonary region. Nanoparticles (NPs) have garnered significant interest for applications in biomedical and pharmaceutical industries because of their unique physicochemical properties and biological activities. In this article, we describe the biological and pharmacological activities of NPs as well as summarize their potential in the formulation of drugs employed to treat pulmonary diseases. Recent advances in the use of NPs in inhalation chemotherapy for the treatment of lung diseases have also been highlighted.

Dynamics and outcomes of binary collisions of equi-diameter picolitre droplets with identical viscosities

The dynamics of binary collisions of equi-diameter picolitre droplets with identical viscosities, varying impact speeds and impact angles have been investigated experimentally and compared to collision outcome prediction models. Collisions between pairs of pure water droplets with a viscosity of 0.89 mPa s and pairs of aqueous-sucrose (40% w/w) droplets with a viscosity of 5.17 mPa s were examined. The colliding droplets were ∼38 μm in diameter, which is around ten times smaller than those previously investigated when examining the effect of viscosity on the outcome of binary droplet collisions. Varying the impact speed and angle resulted in different collision outcomes, including coalescence, reflexive separation and stretching separation. The collision outcomes were plotted on two viscosity dependent regime maps. The regime boundaries are generally in agreement with earlier literature for both high and low viscosity cases. The agreement between experiment and theory, for both fluids, gives more confidence in the models tested here to predict collision outcomes for droplets of this size and these viscosities.

Synthesis, Characterization and In Vitro Evaluation of Chitosan Nanoparticles Physically Admixed with Lactose Microspheres for Pulmonary Delivery of Montelukast

This study aimed to synthesise montelukast-loaded polymeric nanoparticles via the ionic gelation method using chitosan as a natural polymer and tripolyphosphate as a crosslinking agent. Tween 80, hyaluronic acid and leucine were added to modify the physicochemical properties of nanoparticles, reduce the nanoparticles’ uptake by alveolar macrophages and improve powder aerosolisation, respectively. The nanoparticles ranged from 220 nm to 383 nm with a polydispersity index of ≤0.50. The zeta potential of nanoparticles ranged from 11 mV to 22 mV, with a drug association efficiency of 46–86%. The simple chitosan nanoparticles (F2) were more spherical in comparison to other formulations (F4–F6), while the roughness of hyaluronic acid (F5) and leucine (F6) added formulations was significantly high er than F2 and Tween 80 added formulation (F4). The DSC and FTIR analysis depict that the physical and chemical properties of the drug were preserved. The release of the drugs from nanoparticles was more sustained in the case of F5 and F6 when compared to F2 and F4 due to the additional coating of hyaluronic acid and leucine. The nanoparticles were amorphous and cohesive and prone to exhalation due to their small size. Therefore, nanoparticles were admixed with lactose microspheres to reduce particle agglomeration and improve powder dispersion from a dry powder inhaler (DPI). The DPI formulations achieved a dispersed fraction of 75 to 90%, a mass median aerodynamic diameter (MMAD) of 1–2 µm and a fine particle fraction (FPF) of 28–83% when evaluated using the Anderson cascade impactor from Handihaler®. Overall, the montelukast-loaded nanoparticles physically admixed with lactose microspheres achieved optimum deposition in the deep lung for potential application in asthmatic patients.

PM2.5 decadal data in cold vs. mild climate airports: COVID-19 era and a call for sustainable air quality policy

Airports are identified hotspots for air pollution, notably for fine particles (PM_2.5) that are pivotal in aerosol-cloud interaction processes of climate change and human health. We herein studied the field observation and statistical analysis of 10-year data of PM_2.5 and selected emitted co-pollutants (CO, NO_x, and O₃), in the vicinity of three major Canadian airports, with moderate to cold climates. The decadal data analysis indicated that in colder climate airports, pollutants like PM_2.5 and CO accumulate disproportionally to their emissions in fall and winter, in comparison to airports in milder climates. Decadal daily averages and standard errors of PM_2.5 concentrations were as follows: Vancouver, 5.31 ± 0.017; Toronto, 6.71 ± 0.199; and Montreal, 7.52 ± 0.023 μg/m³. The smallest and the coldest airport with the least flights/passengers had the highest PM_2.5 concentration. QQQ-ICP-MS/MS and HR-S/TEM analysis of aerosols near Montreal Airport indicated a wide range of emerging contaminants (Cd, Mo, Co, As, Ni, Cr, and Pb) ranging from 0.90 to 622 μg/L, which were also observed in the atmosphere. During the lockdown, a pronounced decrease in the concentrations of PM_2.5 and submicron particles, including nanoparticles_, in residential areas close to airports was observed, conforming with the recommended workplace health thresholds (~ 2 × 10⁴ cm^-3), while before the lockdown, condensable particles were up to ~ 1 × 10⁵ cm^-3. Targeted reduction of PM_2.5 emission is recommended for cold climate regions.

Potential toxicity of inorganic ions in particulate matter: Ion permeation in lung and disruption of cell metabolism

Exposure to ambient particulate matter (PM) is associated with adverse health effects. Yet, due to the complexity of its chemical composition, the molecular effects of PM exposure and the mechanism of PM-mediated toxicity remain largely unknown. Here, we show that water-soluble inorganics such as nitrate and sulfate ions, rather than PM itself, rapidly penetrate the lung surfactant barrier to the alveolar region and perturb gene expression in the lungs. Through high-throughput sequencing of lung adenocarcinoma cells, we find that exposure to nitrate and sulfate ions activates the cholesterol biosynthetic metabolism and induces the expression of genes related to tumorigenesis. Transcriptome analysis of mouse lungs exposed to nitrate/sulfate aerosols reveals interferon gamma-associated immune response. Interestingly, we find that exposure to a nitrate/sulfate mixture leads to a unique gene expression pattern that is not observed when nitrate or sulfate is treated alone. Our work suggests that the water-soluble ions are a potential source of PM-mediated toxicity and provides a roadmap to unveil the molecular mechanism of health hazards from PM exposure.

Nano-delivery to the lung - by inhalation or other routes and why nano when micro is largely sufficient?

Respiratory diseases gather a wide range of disorders which are generally difficult to treat, partly due to a poor delivery of drugs to the lung with adequate dose and minimum side effects. With the recent developments of nanotechnology, nano-delivery systems have raised interest. In this review, we detail the main types of nanocarriers that have been developed presenting their respective advantages and limitations. We also discuss the route of administration (systemic versus by inhalation), also considering technical aspects (different types of aerosol devices) with concrete examples of applications. Finally, we propose some perspectives of development in the field such as the nano-in-micro approaches, the emergence of drug vaping to generate airborne carriers in the submicron size range, the development of innovative respiratory models to assess regional aerosol deposition of nanoparticles or the application of nano-delivery to the lung in the treatment of other diseases.

Drug Delivery Applications of Coaxial Electrospun Nanofibres in Cancer Therapy

Cancer is one of the most serious health problems and the second leading cause of death worldwide, and with an ageing and growing population, problems related to cancer will continue. In the battle against cancer, many therapies and anticancer drugs have been developed. Chemotherapy and relevant drugs are widely used in clinical practice; however, their applications are always accompanied by severe side effects. In recent years, the drug delivery system has been improved by nanotechnology to reduce the adverse effects of the delivered drugs. Among the different candidates, core-sheath nanofibres prepared by coaxial electrospinning are outstanding due to their unique properties, including their large surface area, high encapsulation efficiency, good mechanical property, multidrug loading capacity, and ability to govern drug release kinetics. Therefore, encapsulating drugs in coaxial electrospun nanofibres is a desirable method for controlled and sustained drug release. This review summarises the drug delivery applications of coaxial electrospun nanofibres with different structures and drugs for various cancer treatments.

Co-immobilization of glucose oxidase and catalase in porous magnetic chitosan microspheres for production of sodium gluconate

In the process of immobilizing the enzyme, the overflow of enzyme and the decrease of enzyme activity are very serious. In order to improve the stable binding between enzyme and carrier, a kind of porous magnetic chitosan microsphere with appropriate pore size was successfully prepared by adjusting the size of pore-forming agent in this paper. The rough porous structure is favorable for the adsorption of enzyme and the catalytic action of enzyme on substrate. The results showed that when the pore size of the microspheres was at 790.15 ± 250.91 nm, the protein loading and enzyme activity of GOD could be increased effectively, which could reach 58.28 ± 2.64 mg/g and 16.93 ± 0.14 U, respectively. The co-immobilization of CAT and GOD eliminated the harmful by-product H2O2 in time and effectively solved the problem of continuous deactivation of GOD in the reaction process. When the mass ratio of PMCSM/GOD/CAT was 100/6.02/10.96 (mg/mg/mg), the relative enzyme activity of GOD reached the highest (133.32 ± 0.68%). The thermal stability and pH stability of the enzyme were greatly improved after co-immobilization. The relative enzyme activity of PMCSM@GOD@CAT was 57.27 ± 3.04% at 60 °C, while that of free GOD was only 28.76 ± 4.10%. The relative enzyme activity of PMCSM@GOD@CAT was above 63% at pH 5–10, while the relative enzyme activity of free GOD was only 4.98 ± 0.72% at pH 10. The yield of sodium gluconate from 50 mL 250 mg/mL glucose catalyzed by PMCSM@GOD@CAT loading 60.2 mg GOD was 96.19 ± 0.79% at pH 6.0 and 30 °C, and the reaction lasted 6 h. The relative enzyme activity of PMCSM@GOD@CAT remained 69.77 ± 0.78% after repeated use for 10 times. After 30 days of storage, PMCSM@GOD@CAT maintained its initial activity of 76.52 ± 1.41%. The immobilized process studied in this paper provides a theoretical basis for the production of sodium gluconate by double enzyme directly catalyzing and lays a certain foundation for the application of immobilized enzyme in the future chemical industry and food industry.

Safe in the womb? Effects of air pollution to the unborn child and neonates

OBJECTIVE

In this brief review, the authors focus on the effects of gestational exposures to urban air pollution on fetal development and neonatal outcomes.

SOURCE OF DATA

In this review the authors used PubMed, Web of Science and SciELO research platforms, analyzing papers from the last 30 years.

SUMMARY OF THE FINDINGS

Epidemiological and experimental evidence agree that gestational exposure to air pollution in urban increases the risks for low birth weight, preterm birth, congenital malformation, intrauterine growth restriction, and neonatal mortality. Furthermore, exposures are associated with increased risks for preeclampsia, hypertension, gestational diabetes.

CONCLUSIONS

Therefore, it is time for greater involvement and engagement of the health sector in the discussion of public policies that may affect the quality of the environment, and that directly or indirectly impact the health of those who were not yet born.

Nanocrystals based pulmonary inhalation delivery system: advance and challenge

Pulmonary inhalation administration is an ideal approach to locally treat lung disease and to achieve systemic administration for other diseases. However, the complex nature of the structural characteristics of the lungs often results in the difficulty in the development of lung inhalation preparations. Nanocrystals technology provides a potential formulation strategy for the pulmonary delivery of poorly soluble drugs, owing to the decreased particle size of drug, which is a potential approach to overcome the physiological barrier existing in the lungs and significantly increased bioavailability of drugs. The pulmonary inhalation administration has attracted considerable attentions in recent years. This review discusses the barriers for pulmonary drug delivery and the recent advance of the nanocrystals in pulmonary inhalation delivery. The presence of nanocrystals opens up new prospects for the development of novel pulmonary delivery system. The particle size control, physical instability, potential cytotoxicity, and clearance mechanism of inhaled nanocrystals based formulations are the major considerations in formulation development.

Modelled lung deposition and retention of welding fume particles in occupational scenarios: a comparison to doses used in vitro

Translating particle dose from in vitro systems to relevant human exposure remains a major challenge for the use of in vitro studies in assessing occupational hazard and risk of particle exposure. This study aimed to model the lung deposition and retention of welding fume particles following occupational scenarios and subsequently compare the lung doses to those used in vitro. We reviewed published welding fume concentrations and size distributions to identify input values simulating real-life exposure scenarios in the multiple path particle dosimetry (MPPD) model. The majority of the particles were reported to be below 0.1 μm and mass concentrations ranged between 0.05 and 45 mg/m³. Following 6-h exposure to 5 mg/m³ with a count median diameter of 50 nm, the tracheobronchial lung dose (0.89 µg/cm²) was found to exceed the in vitro cytotoxic cell dose (0.125 µg/cm²) previously assessed by us in human bronchial epithelial cells (HBEC-3kt). However, the tracheobronchial retention decreased rapidly when no exposure occurred, in contrast to the alveolar retention which builds-up over time and exceeded the in vitro cytotoxic cell dose after 1.5 working week. After 1 year, the tracheobronchial and alveolar retention was estimated to be 1.15 and 2.85 µg/cm², respectively. Exposure to low-end aerosol concentrations resulted in alveolar retention comparable to cytotoxic in vitro dose in HBEC-3kt after 15-20 years of welding. This study demonstrates the potential of combining real-life exposure data with particle deposition modelling to improve the understanding of in vitro concentrations in the context of human occupational exposure.

Bridging micro/nano-platform and airway allergy intervention

Allergic airway diseases, with incidence augmenting visibly as industrial development and environmental degradation, are characterized by sneezing, itching, wheezing, chest tightness, airway obstruction, and hyperresponsiveness. Current medical modalities attempt to combat these symptoms mostly by small molecule chemotherapeutants, such as corticosteroids, antihistamines, etc., via intranasal approach which is one of the most noninvasive, rapid-absorbed, and patient-friendly routes. Nevertheless, inherent defects for irritation to respiratory mucosa, drug inactivation and degradation, and rapid drug dispersal to off-target sites are inevitable. Lately, intratracheal micro/nano therapeutic systems are emerging as innovative alternatives for airway allergy interventions. This overview introduces several potential application directions of mic/nano-platform in the treatment of airway allergic diseases, including carriers, therapeutic agents, and immunomodulators. The improvement of the existing drug therapy of respiratory allergy management by micro/nano-platform is described in detail. The challenges of the micro/nano-platform nasal approach in the treatment of airway allergy are summarized and the development of micro/nano-platform is also prospected. Although still a burgeoning area, micro/nano therapeutic systems are gradually turning to be realistic orientations as crucial future alternative therapeutic options in allergic airway inflammation interventions.

Inhalation delivery of repurposed drugs for lung cancer: Approaches, benefits and challenges

Lung cancer (LC) is one of the leading causes of mortality accounting for almost 25% of cancer deaths throughout the world. The shortfall of affordable and effective first-line chemotherapeutics, the existence of resistant tumors, and the non-optimal route of administration contribute to poor prognosis and high mortality in LC. Administration of repurposed non-oncology drugs (RNODs) loaded in nanocarriers (NCs) via inhalation may prove as an effective alternative strategy to treat LC. Furthermore, their site-specific release through inhalation route using an appropriate inhalation device would offer improved therapeutic efficacy, thereby reducing mortality and improving patients' quality of life. The current manuscript offers a comprehensive overview on use of RNODs in LC treatment with an emphasis on their inhalation delivery and the associated challenges. The role of NCs to improve lung deposition and targeting of RNODs via inhalation are also elaborated. In addition, information about various RNODs in clinical trials for the treatment of LC, possibility for repurposing phytoceuticals against LC via inhalation and the bottlenecks associated with repurposing RNODs against cancer are also highlighted. Based on the reported studies covered in this manuscript, it was understood that delivery of RNODs via inhalation has emerged as a propitious approach. Hence, it is anticipated to provide effective first-line treatment at an affordable cost in debilitating LC from low and middle-income countries (LMIC).

Potential consumer exposure to respirable particles and TiO2 due to the use of eyebrow powders

BACKGROUND

Cosmetic powders contain numerous components, including titanium dioxide (TiO₂), which is classified as possibly carcinogenic to humans (Group 2B). However, little is known about potential inhalation exposures to particles that are released during cosmetic powder applications.

METHODS

We realistically simulated the application of five different eyebrow powders using a mannequin and then determined concentrations of total suspended particles (TSP), PM₁₀, and PM₄ fractions of particles that would be inhaled during powder application. We determined the size and shape of particles in the original powders and released particles, as well as their TiO₂ concentrations and Ti content of individual particles.

RESULTS

The application of eyebrow powders resulted in the release and inhalation of airborne particles at concentrations ranging from 21.2 to 277.3 µg/m³, depending on the particle fraction and the powder. The concentrations of TiO₂ in PM₄ and PM₁₀ samples reached 2.7 µg/m³ and 9.3 µg/m³, respectively. The concentration of TiO₂ in airborne particle fractions was proportional to the presence of TiO₂ in the bulk powder.

CONCLUSION

The application of eyebrow powders results in user exposures to respirable PM₄ and PM₁₀ particles, including those containing TiO₂. This information should be of interest to stakeholders concerned about inhalation exposure to TiO₂.