Environmental dynamics of metal oxide nanoparticles in heterogeneous systems: A review

A systematic review of antibiotic resistance driven by metal-based nanoparticles: Mechanisms and a call for risk mitigation

Elevations in antibiotic resistance genes (ARGs) are due not only to the antibiotic burden, but also to numerous environmental pressures (e.g., pesticides, metal ions, or psychotropic pharmaceuticals), which have led to an international public health emergency. Metal-based nanoparticles (MNPs) poison bacteria while propelling nanoresistance at ambient or sub-lethal concentrations, acting as a wide spectrum germicidal agent. Awareness of MNPs driven antibiotic resistance has created a surge of investigation into the molecule mechanisms of evolving and spreading environmental antibiotic resistome. Co-occurrence of MNPs resistance and antibiotic resistance emerge in environmental pathogens and benign microbes may entail a crucial outcome for human health. In this review we expound on the systematic mechanism of ARGs proliferation under the stress of MNPs, including reactive oxygen species (ROS) induced mutation, horizontal gene transfer (HGT) relevant genes regulation, nano-property, quorum sensing, and biofilm formation and highlighting on the momentous contribution of nanoparticle released ion. As antibiotic resistance pattern alteration is closely knit with the mediate activation of nanoparticle in water, soil, manure, or sludge habitats, we have proposed a virulence and evolution based antibiotic resistance risk assessment strategy for MNP contaminated areas and discussed practicable approaches that call for risk management in critical environmental compartments.

Tritiated stainless steel (nano)particle release following a nuclear dismantling incident scenario: Significant exposure of freshwater ecosystem benthic zone

Nuclear facilities continue to be developed to help meet global energy demands while reducing fossil fuel use. However, an incident during the dismantling of these facilities could accidentally release tritiated particles (e.g. stainless steel) into the environment. Herein, we investigated the environmental dosimetry, fate, and impact of tritiated stainless steel (nano)particles (1 mg.L-1 particles and 1 MBq.L-1 tritium) using indoor freshwater aquatic mesocosms to mimic a pond ecosystem. The tritium (bio)distribution and particle fate and (bio)transformation were monitored in the different environmental compartments over 4 weeks using beta counting and chemical analysis. Impacts on picoplanktonic and picobenthic communities, and the benthic freshwater snail, Anisus vortex, were assessed as indicators of environmental health. Following contamination, some tritium (∼16%) desorbed into the water column while the particles rapidly settled onto the sediment. After 4 weeks, the particles and the majority of the tritium (>80%) had accumulated in the sediment, indicating a high exposure of the benthic ecological niche. Indeed, the benthic grazers presented significant behavioral changes despite low steel uptake (<0.01%). These results provide knowledge on the potential environmental impacts of incidental tritiated (nano)particles, which will allow for improved hazard and risk management.

The Molecular Mechanism of the Response of Rice to Arsenic Stress and Effective Strategies to Reduce the Accumulation of Arsenic in Grain

Rice (Oryza sativa L.) is the staple food for more than 50% of the world's population. Owing to its growth characteristics, rice has more than 10-fold the ability to enrich the carcinogen arsenic (As) than other crops, which seriously affects world food security. The consumption of rice is one of the primary ways for humans to intake As, and it endangers human health. Effective measures to control As pollution need to be studied and promoted. Currently, there have been many studies on reducing the accumulation of As in rice. They are generally divided into agronomic practices and biotechnological approaches, but simultaneously, the problem of using the same measures to obtain the opposite results may be due to the different species of As or soil environments. There is a lack of systematic discussion on measures to reduce As in rice based on its mechanism of action. Therefore, an in-depth understanding of the molecular mechanism of the accumulation of As in rice could result in accurate measures to reduce the content of As based on local conditions. Different species of As have different toxicity and metabolic pathways. This review comprehensively summarizes and reviews the molecular mechanisms of toxicity, absorption, transport and redistribution of different species of As in rice in recent years, and the agronomic measures to effectively reduce the accumulation of As in rice and the genetic resources that can be used to breed for rice that only accumulates low levels of As. The goal of this review is to provide theoretical support for the prevention and control of As pollution in rice, facilitate the creation of new types of germplasm aiming to develop without arsenic accumulation or within an acceptable limit to prevent the health consequences associated with heavy metal As as described here.

Effects of Mixtures of Engineered Nanoparticles and Cocontaminants on Anaerobic Digestion

The widespread application of nanotechnology inevitably leads to an increased release of engineered nanoparticles (ENPs) into the environment. Due to their specific physicochemical properties, ENPs may interact with other contaminants and exert combined effects on the microbial community and metabolism of anaerobic digestion (AD), an important process for organic waste reduction, stabilization, and bioenergy recovery. However, the complicated interactions between ENPs and other contaminants as well as their combined effects on AD are often overlooked. This review therefore focuses on the co-occurrence of ENPs and cocontaminants in the AD process. The key interactions between ENPs and cocontaminants and their combined influences on AD are summarized from the available literature, including the critical mechanisms and influencing factors. Some sulfides, coagulants, and chelating agents have a dramatic "detoxification" effect on the inhibition effect of ENPs on AD. However, some antibiotics and surfactants increase the inhibition of ENPs on AD. The reasons for these differences may be related to the interactive effects between ENPs and cocontaminants, changes of key enzyme activities, adenosine triphosphate (ATP) levels, reactive oxygen species (ROS) production, and microbial communities. New scientific opportunities for a better understanding of the coexistence in real world situations are converging on the scale of nanoparticles.

Characterization of Fe-Containing and Pb-Containing Nanoparticles Resulting from Corrosion of Plumbing Materials in Tap Water Using a Hyphenated ATM-DMA-spICP-MS System

Single-particle inductively coupled plasma mass spectrometry (spICP-MS) has been used to characterize metallic nanoparticles (NPs) assuming that all NPs are spherical and composed of pure element. However, environmental NPs generally do not meet these criteria, suggesting that spICP-MS may underestimate their true sizes. This study employed a system hyphenating the atomizer (ATM), differential mobility analyzer (DMA), and spICP-MS to characterize metallic NPs in tap water. Its performance was validated by using reference Au nanoparticles (AuNPs) and Ag-shelled AuNPs. The hyphenated system can determine the actual size and metal composition of both NPs with additional heating after ATM, while stand-alone spICP-MS misidentified the Ag-shelled AuNPs as smaller individual AgNPs and AuNPs. Dissolved metal ions could introduce artifact NPs after heating but could be eliminated by centrifugation. The hyphenated system was applied to characterize Fe-containing and Pb-containing NPs resulting from the corrosion of plumbing materials in tap water. The mode sizes of Fe-containing and Pb-containing NPs were determined to be 110 and 100 nm and the particle number concentrations were determined to be 4.99 × 107 and 1.40 × 106 #/mL, respectively. Cautions should be paid to potential changes in particle size induced by heating for metallic NPs with a low melting point or a high organic content.

Heavy metal-tolerant bacteria Bacillus cereus BCS1 degrades pyrethroid in a soil-plant system

The heightened concern about the environmental impacts of pollutants drives interest in reducing their threats to humans and the environment. Bioremediating polluted sites under environmental stresses like biotic and abiotic poses significant challenges. This study aimed to isolate a bacterium that effectively degrades pyrethroids even under abiotic stresses involving heavy metals and biotic stresses with autochthonous factors. Here, a bacterial strain, Bacillus cereus BCS1 was isolated. The response surface methodology was established to quantify the environmental impacts on pyrethroid degradation. BCS1 effectively degraded pyrethroids across conditions at 21-36 °C, pH 6.5-8.0 and inoculum sizes 1.9-4.1 mg·L-1, exceeding 90% degradation. Notably, over 84% of β-cypermethrin (β-CP) was degraded even when exposed to various concentrations of lead (10-1000 mg·L-1), chromium (10-1000 mg·L-1), or cadmium (0.5-50 mg·L-1). Moreover, BCS1 significantly accelerated β-CP degradation in soil-plant systems, displaying biotic stress tolerance, with lower half-life values (10.1 and 9.5 d) in soil and higher removal (92.1% and 60.9%) in plants compared to controls (27.7 and 25.7 d), and (18.2% and 24.3%). This study presents a novel strain capable of efficiently degrading pyrethroids and displaying remarkable environmental stress resistance. Findings shed light on bioremediating organic pollutants in complex soil ecosystems.

Influence of surface modification and size of lanthanide-doped upconverting nanoparticles on wheat seedlings

In recent years, nanotechnology has found widespread applications in environmental monitoring, medical applications, plant fertilisers, cosmetics and others. Therefore, it is important to study nanomaterials' influence and subsequent risks to the environment and organisms (from production to disposal). Therefore, in the present study, the toxic effects of two surface modifications (poly (ethylene glycol)-neridronate, PEG-Ner and poly (acrylic acid), PAA) in comparison to unmodified, 26 nm- and 52 nm-sized core@shell lanthanide-doped upconverting nanoparticles (UCNPs, NaYF4:Yb3+,Er3+@NaYF4) were analysed. Wheat seedlings (Triticum aestivum L.) were chosen as a model organism since this species is one of the most widely cultivated crops. The influence of UCNPs (at concentrations of 0, 10, 50, and 100 μg/mL) on germination percentage, germination rate and growth was studied based on morphological parameters such as root number, root and hypocotyl length, and root and hypocotyl mass. In addition, an assay based on Evans blue staining was conducted to analyse damaged cell membranes and cell death. The type, size and concentration of UCNPs influenced the growth but not the germination of wheat. 52-nm-sized ligand-free UCNPs and the 26-nm-sized UCNPs/PAA decreased plant growth. Moreover, the ligand-free 26-nm-sized UCNPs interacted with the root cell membranes of seedlings. No significant changes were observable regarding viability (tetrazolium chloride reduction assay), oxidative stress and electrolyte leakage from root cells in plants incubated with ligand-free 26-nm-sized UCNPs. Overall, we have shown that the ligand-free UCNPs (of both sizes) had the strongest toxic effect; PAA-modified UCNPs were toxic only at smaller sizes and PEG-Ner-modified UCNPs had no toxic impact. Therefore, PEG-Ner was identified as the safest surface compound among the UCNPs investigated in the study, which may neutralise the harmful effects of nanoparticles on plants.

Antioxidant response to ZnO nanoparticles in juvenile Takifugu obscurus: protective effects of salinity

The extensive utilization of Zinc Oxide nanoparticles (ZnO NPs) has garnered significant attention due to their detrimental impacts on ecosystem. Unfortunately, ecotoxicity of ZnO NPs in coastal waters with fluctuating salinity has been disregarded. This study mainly discussed the toxic effects of ZnO NPs on species inhabiting the transition zones between freshwater and brackish water, who are of great ecological and economic importance among fish. To serve as the model organism, Takifugu obscurus, a juvenile euryhaline fish, was exposed to different ZnO NPs concentrations (0-200 mg/L) and salinity levels (0 and 15 ppt). The results showed that a moderate increase in salinity (15 ppt) could alleviate the toxic effect of ZnO NPs, as evidenced by improved survival rates. The integrated biomarker response index on oxidative stress also revealed that the toxicity of ZnO NPs was higher in freshwater compared to brackish water. These outcomes can be attributed to higher salinity (15 ppt) reducing the bioavailability of ZnO NPs by facilitating their aggregation and inhibiting the release of metal ions. It is noteworthy that elevated salinity was found to alleviate ZnO NPs toxicity by means of osmotic adjustment via the activation of Na+/K+-ATPase activity. This study demonstrates the salinity-dependent effect of ZnO NPs on T. obscurus, suggesting the possibility for euryhaline fish like T. obscurus to adapt their habitat towards more saline environments, under constant exposure to ZnO NPs.

Comparative toxicity assessment of individual, binary and ternary mixtures of SiO2, Fe3O4, and ZnO nanoparticles in freshwater microalgae, Scenedesmus obliquus: Exploring the role of dissolved ions

Metal oxide nanoparticles (NPs) are considered among the most prevalent engineered nanomaterials. To have a deeper understanding of the mode of action of multiple metal oxide nanoparticles in mixtures, we have used a unicellular freshwater microalga Scenedesmus obliquus as a model organism. The toxicity of silicon dioxide (SiO2), iron oxide (Fe3O4), and zinc oxide (ZnO) NPs was studied individually as well as in their binary (SiO2 + Fe3O4, Fe3O4 + ZnO, and ZnO + SiO2) and ternary (SiO2 + Fe3O4 + ZnO) combinations. The effects of metal ions from ZnO and Fe3O4 were investigated as well. The results observed from the study, showed that a significant amount of toxicity was contributed by the dissolved ions in the mixtures of the nanoparticles. Decreases in the cell viability, ROS generation, lipid peroxidation, antioxidant enzyme activity, and photosynthetic efficiency were analyzed. Among all the individual particles, ZnO NPs showed the maximum effects and increased the toxicities of the binary mixtures. The binary and ternary mixtures of the NPs clearly showed increased toxic effects in comparison with the individual entities. However, the ternary combination had lesser toxic effects than the binary combination of Fe3O4 + ZnO. The decline in cell viability and photosynthetic efficiency were strongly correlated with various oxidative stress biomarkers emphasizing the crucial role of reactive oxygen species in inducing the toxic effects. The findings from this study highlight the importance of evaluating the combinatorial effects of various metal oxide NPs as part of a comprehensive ecotoxicity assessment in freshwater microalgae.

Performance of constructed wetlands with different water level for treating graphene oxide wastewater: Characteristics of plants and microorganisms

Constructed wetlands (CWs) have been expected advantages in emerging pollutant removal, but with less known on their characteristic when treating wastewater containing graphene oxide (GO). In present study, we investigated characteristics of Iris pseudacorus, microorganisms, and pollutant removal in CWs with 60 cm and 37 cm water level (termed HCW and LCW). Plants in LCW had higher chlorophyll content and lower activities of antioxidant enzyme (superoxide dismutase, catalase, peroxidase) as well as malondialdehyde content. Substrate enzyme activities were affected by time and CW type. LCW increased only dehydrogenase activities, while HCW increased catalase, urease, neutral phosphatase, and arylsulfatase activities. Sequencing analysis revealed that microbial community showed higher richness and diversity in LCW, but this dissimilarity could be eased by time-effect. Proteobacteria (25.62-60.36%) and Actinobacteria (13.86-56.20%) were stable dominant phyla in CWs. Ratio of Proteobacteria/Acidobacteria indicated that trophic status of plant rhizosphere zone was lower in LCW. Nitrospirae were enriched to 0.16-0.68% and 0.75-1.42% in HCW and LCW. The enrichment of phyla Proteobacteria and Firmicutes in HCW was attributed to class Gammaproteobacteria and genus Enterococcus. GO transformation showed some reductions in CWs, which could be affected by water depth and substrate depth. Overall, HCW achieved nitrogen and phosphorus removal for 48.78-62.99% and 95.01%, which decreased by 8.41% and 7.31% in LCW. COD removal was less affected reaching 93%. This study could provide some new evidence for CWs to treat wastewater containing GO.

Single-cell ICP-MS for studying the association of inorganic nanoparticles with cell lines derived from aquaculture species

The current research deals with the use of single-cell inductively coupled plasma-mass spectrometry (scICP-MS) for the assessment of titanium dioxide nanoparticle (TiO₂ NP) and silver nanoparticle (Ag NP) associations in cell lines derived from aquaculture species (sea bass, sea bream, and clams). The optimization studies have considered the avoidance of high dissolved background, multi-cell peak coincidence, and possible spectral interferences. Optimum operating conditions were found when using a dwell time of 50 μs for silver and 100 μs for titanium. The assessment of associated TiO₂ NPs by scICP-MS required the use of ammonia as a reaction gas (flow rate at 0.75 mL min^-1) for interference-free titanium determinations (measurements at an m/z ratio of 131 from the ⁴⁸Ti(NH)(NH₃)₄ adduct). The influence of other parameters such as the number of washing cycles and the cell concentration on accurate determinations by scICP-MS was also fully investigated. Cell exposure trials were performed using PVP-Ag NPs (15 and 100 nm, nominal diameter) and citrate-TiO₂ NPs (5, 25, and 45 nm, nominal diameter) at nominal concentrations of 10 and 50 μg mL^-1 for citrate-TiO₂ NPs and 5.0 and 50 μg mL^-1 for PVP-Ag NPs. Results have shown that citrate-TiO₂ NPs interact with the outer cell membranes, being quite low in the number of citrate-TiO₂ NPs that enters the cells (the high degree of aggregation is the main factor which leads to the aggregates being in the extracellular medium). In contrast, PVP-Ag NPs have been found to enter the cells.

Salinity Moderated the Toxicity of Zinc Oxide Nanoparticles (ZnO NPs) towards the Early Development of Takifugu obscurus

ZnO nanoparticles (ZnO NPs) have been applied in a wide range of fields due to their unique properties. However, their ecotoxicological threats are reorganized after being discharged. Their toxic effect on anadromous fish could be complicated due to the salinity fluctuations during migration between freshwater and brackish water. In this study, the combined impact of ZnO NPs and salinity on the early development of a typical anadromous fish, obscure puffer (Takifugu obscurus), was evaluated by (i) observation of the nanoparticle characterization in salt solution; (ii) quantification of the toxicity to embryos, newly hatched larvae, and larvae; and (iii) toxicological analysis using biomarkers. It is indicated that with increased salinity level in brackish water (10 ppt), the toxicity of ZnO NPs decreased due to reduced dissolved Zn2+ content, leading to higher hatch rate of embryos and survival rate of larvae than in freshwater (0 ppt). The irregular antioxidant enzyme activity changes are attributed to the toxic effects of nanoparticles on CAT (catalase), but further determination is required. The results of present study have the significance to guide the wildlife conservation of Takifugu obscurus population.

Advancements in antimicrobial nanoscale materials and self-assembling systems

Antimicrobial resistance is directly responsible for more deaths per year than either HIV/AIDS or malaria and is predicted to incur a cumulative societal financial burden of at least $100 trillion between 2014 and 2050. Already heralded as one of the greatest threats to human health, the onset of the coronavirus pandemic has accelerated the prevalence of antimicrobial resistant bacterial infections due to factors including increased global antibiotic/antimicrobial use. Thus an urgent need for novel therapeutics to combat what some have termed the 'silent pandemic' is evident. This review acts as a repository of research and an overview of the novel therapeutic strategies being developed to overcome antimicrobial resistance, with a focus on self-assembling systems and nanoscale materials. The fundamental mechanisms of action, as well as the key advantages and disadvantages of each system are discussed, and attention is drawn to key examples within each field. As a result, this review provides a guide to the further design and development of antimicrobial systems, and outlines the interdisciplinary techniques required to translate this fundamental research towards the clinic.

Fabrication and characterization of magnetic nanomaterials for the removal of toxic pollutants from water environment: A review

The success of any sustainable growth represents an advancement of novel approaches and new methodologies for managing any ecological concern. Magnetic nanoparticles have gained recent interest owing to their versatile properties such as controlled size, shape, quantum and surface effect, etc, and outcome in wastewater treatment and pollutant removal. Developments have progressed in synthesizing magnetic nanoparticles with the required size, shape and morphology, surface and chemical composition. Magnetic nanoparticles are target specific and inexpensive compared to conventional treatment techniques. This review insight into the synthesis of magnetic nanoparticles using physical, chemical, and biological methods. The biological method of synthesizing magnetic nanoparticles serves to be cost-effective, green process, and eco-friendly for various applications. Characterization studies of synthesized nanoparticles using TEM, XRD, SARS, SANS, DLS, etc are discussed in detail. Magnetic nanoparticles are widely utilized in recent research for removing organic and inorganic contaminants. It was found that the magnetic nanosorption approach together with redox reactions proves to be an effective and flexible mechanism for the removal of pollutants from waste effluents.

Pristine and sulfidized ZnO nanoparticles alter microbial community structure and nitrogen cycling in freshwater lakes

Zinc oxide nanoparticles (ZnO NPs) and its sulfidized form (ZnS NPs) are increasingly entering into freshwater systems through multiple pathways. However, their impacts on the composition and function of sedimentary microbial communities are still largely unknown. Here, two kinds of lake-derived microcosms were constructed and incubated with ZnO NPs, or ZnS NPs to investigate the short-term (7 days) and long-term (50 days) impacts on sedimentary microbial communities and nitrogen cycling. After 7 days, both ZnO NPs and ZnS NPs dosed microbial communities experienced distinct alterations as compared to the undosed controls. By day 50, the structural shifts of microbial communities caused by ZnO NPs were significantly enlarged, while the microbial shifts induced by ZnS NPs were largely resolved. Additionally, ZnO NPs and ZnS NPs could significantly alter nitrogen species and nitrogen cycling genes in sediments, revealing their non-negligible impacts on nitrogen cycling processes. Furthermore, our data clearly indicated that the impacts of ZnO NPs and ZnS NPs on nitrogen cycling differed distinctly in different lake-derived microcosms, and the impacts were significantly correlated with microbial community structure. Overall, this research suggests that the entrance of pristine or sulfidized ZnO NPs into freshwater systems may significantly impact the sedimentary microbial community structure and nitrogen cycling.

Co-application of nanosized halloysite and biochar as soil amendments in aided phytostabilization of metal(-oid)s-contaminated soil under different temperature conditions

The threat posed by the degradation of the soil environment by metal (-oid)s has been lead to the improvement of existing or search for new remediation methods; in this case, the application of environmentally friendly nanomaterials falls into this trend. The study applied a technique of aided phytostabilization for the immobilization of metal (-oid)s in soil with the application of nanosized halloysite and biochar (nBH), along with Lolium perenne L. Its effectiveness was assessed in terms of changing temperature conditions (16 cycles of freeze and thaw cycles, (FTC)) on the content of As, Cu, Pb and Zn in the soil, roots, and above-ground parts of the tested plant, chemical fraction distributions of metal (-oid)s and their stability (based on reduced partition index, I_r). The biomass yield in nBH-amended soil was 2-fold higher compared to control soil, but it decreased by 1.6-fold after FTC. nBH facilitated more bioaccumulation of As, Pb and Zn than Cu in plant roots, before than after FTC. nBH increased pH in phytostabilized soil, but it was not affected by changing FTC. In soil nBH-phytostabilized total concentration of metal (-oid)s significantly decreased compared to control soil, for As and Cu below permissible value, regardless of FTC. Soil amendment and changing temperature conditions affected metal (-oid)s redistribution in soil. As a result, the stability of As increased from 0.50 to 0.66, Cu from 0.49 to 0.52, Pb from 0.36 to 0.48 and Zn from 0.39 to 0.47. These findings suggest that nBH can immobilize metal (-oid)s in phytostabilized soil under changing temperature conditions.

The co-occurrence of Zn-and Cu-based engineered nanoparticles in soils: The metal extractability vs. toxicity to Folsomia candida

The presence of engineered nanoparticles (ENPs) in soil gradually increases, among others due to the nano-agrochemicals application. So far, the co-existence of different ENPs in soil is poorly examined. Here, the metal extractability and toxicity of soils spiked (300 mg kg^-1) singly and jointly with Zn- and Cu-based ENPs or metal salts were tested. The samples were aged for 1 and 90 days. The predicting available metal component of ENPs concentrations were determined by different methods including soil pore water collection and batch extractions with H₂O, CaCl₂ or DTPA. Survival and reproduction of Folsomia candida were also evaluated. The combined effect of ENPs on the extractability of metals was mainly found with DTPA characterized by the highest leaching capacity among the used extractants. In fresh soil, the mixtures of ENPs differentiated only DTPA-extractable Cu level, while aging resulted in changes in both Zn and Cu concentrations leached by CaCl₂ or DTPA. However, the character of the combined effect was an ENPs- and soil type-dependent, whereas the mixtures of metal salts mostly provided higher Zn and Cu recovery than the individual compounds. The pattern of co-toxicity of metal-oxide ENPs was also time-dependent: the antagonistic and synergistic effect was observed in the samples after 1 and 90 days, respectively. However, the toxicity was weakly related with extractable concentrations in both single and joint treatment of metal compounds. The distinct joint effect patterns of ENPs imply the need for more in-depth investigation of mechanisms of activity of ENPs mixtures in soil.

Recent progress on the heavy metals ameliorating potential of engineered nanomaterials in rice paddy: a comprehensive outlook on global food safety with nanotoxicitiy issues

Soil contamination with toxic heavy metals (HMs) poses a serious threat to global food safety, soil ecosystem and human health. The rapid industrialization, urbanization and extensive application of agrochemicals on arable land have led to paddy soil pollution worldwide. Rice plants easily accumulate toxic HMs from contaminated agricultural soils, which ultimately accumulated in grains and enters the food chain. Although, physical and chemical remediation techniques have been used for the treatment of HMs-contaminated soils, however, they also have many drawbacks, such as toxicity, capital investment and environmental-associated hazards. Recently, engineered nanomaterials (ENMs) have gained substantial attention owing to their promising environmental remediation applications. Numerous studies have revealed the use of ENMs for reclamation of toxic HMs from contaminated environment. This review mainly focuses on HMs toxicity in paddy soils along with potential health risks to humans. It also provides a critical outlook on the recent advances and future perspectives of nanoremediation strategies. Additionally, we will also propose the interacting mechanism of HMs-ENMs to counteract metal-associated phytotoxicities in rice plants to achieve global food security and environmental safety.

The impacts of metal-based engineered nanomaterial mixtures on microbial systems: A review

The last decade has witnessed tremendous growth in the commercial use of metal-based engineered nanomaterials (ENMs) for a wide range of products and processes. Consequently, direct and indirect release into environmental systems may no longer be considered negligible or insignificant. Yet, there is an active debate as to whether there are real risks to human or ecological health with environmental exposure to ENMs. Previous research has focused primarily on the acute effects of individual ENMs using pure cultures under controlled laboratory environments, which may not accurately reveal the ecological impacts of ENMs under real environmental conditions. The goal of this review is to assess our current understanding of ENM effects as we move from exposure of single to multiple ENMs or microbial species. For instance, are ENMs' impacts on microbial communities predicted by their intrinsic physical or chemical characteristics or their effects on single microbial populations; how do chronic ENM interactions compare to acute toxicity; does behavior under simplified laboratory conditions reflect that in environmental media; finally, is biological stress modified by interactions in ENM mixtures relative to that of individual ENM? This review summarizes key findings and our evolving understanding of the ecological effects of ENMs under complex environmental conditions on microbial systems, identifies the gaps in our current knowledge, and indicates the direction of future research.

Inorganic arsenic toxicity and alleviation strategies in rice

Direct or indirect exposure to inorganic arsenic (iAs) in the forms of AsIII (arsenite) and AsV (arsenate) through consumption of As-contaminated food materials and drinking water leads to arsenic poisoning. Rice (Oryza sativa L.) plant potentially accumulates a high amount of iAs from paddy fields than any other cereal crops. This makes it to be a major source of iAs especially among the population that uses it as their dominant source of diet. The accumulation of As in human bodies poses a serious global health risk to the human population. Various conventional methods have been applied to reduce the arsenic accumulation in rice plant. However, the success rate of these techniques is low. Therefore, the development of efficient and effective methods aimed at lowering iAs toxicity is a very crucial public concern. With the current advancement in technology, new strategies aimed at addressing this concern are being developed and utilized in various parts of the world. In this review, we discuss the recent advances in the management of iAs in rice plants emphasizing the use of nanotechnology and biotechnology approaches. Also, the prospects and challenges facing these approaches are described.

Synthesis and self-assembly of curcumin-modified amphiphilic polymeric micelles with antibacterial activity

BACKGROUND

The ubiquitous nature of bacterial biofilms combined with the enhanced resistance towards antimicrobials has led to the development of an increasing number of strategies for biofilm eradication. Such strategies must take into account the existence of extracellular polymeric substances, which obstruct the diffusion of antibiofilm agents and assists in the maintenance of a well-defended microbial community. Within this context, nanoparticles have been studied for their drug delivery efficacy and easily customised surface. Nevertheless, there usually is a requirement for nanocarriers to be used in association with an antimicrobial agent; the intrinsically antimicrobial nanoparticles are most often made of metals or metal oxides, which is not ideal from ecological and biomedical perspectives. Based on this, the use of polymeric micelles as nanocarriers is appealing as they can be easily prepared using biodegradable organic materials.

RESULTS

In the present work, micelles comprised of poly(lactic-co-glycolic acid) and dextran are prepared and then functionalised with curcumin. The effect of the functionalisation in the micelle's physical properties was elucidated, and the antibacterial and antibiofilm activities were assessed for the prepared polymeric nanoparticles against Pseudomonas spp. cells and biofilms. It was found that the nanoparticles have good penetration into the biofilms, which resulted in enhanced antibacterial activity of the conjugated micelles when compared to free curcumin. Furthermore, the curcumin-functionalised micelles were efficient at disrupting mature biofilms and demonstrated antibacterial activity towards biofilm-embedded cells.

CONCLUSION

Curcumin-functionalised poly(lactic-co-glycolic acid)-dextran micelles are novel nanostructures with an intrinsic antibacterial activity tested against two Pseudomonas spp. strains that have the potential to be further exploited to deliver a secondary bioactive molecule within its core.

Investigating the remediation potential of iron oxide nanoparticles in Cu-polluted soil-plant systems: coupled geochemical, geophysical and biological approaches

Although the use of iron oxide nanoparticles (IONPs) has high potential in remediation and agriculture, a major hindrance to their use includes the risk of contamination of soil and water resources with underexplored effects of IONPs on biota. The fate, phytotoxicity and remediation potential of IONPs are investigated with soil column experiments using 7 nm-sized magnetite (Fe₃O₄) nanoparticles (magnNPs) and sunflower (Helianthus annuus). Control soil, magnNP-containing soil (10 g magnNPs per kg soil), copper-polluted soil (500 mg Cu per kg soil) and copper-polluted soil containing magnNPs (10 g magnNPs per kg soil and 500 mg Cu per kg soil) support sunflower growth for 57 and 95 days. In magnNP-exposed plants, the occurrence of magnNPs does not affect the growth of the vegetative aerial parts and photosynthetic efficiency. Decreased lipid peroxidation indicates an enhanced antioxidant enzymatic response of magnNP-exposed plants. In plants grown in Cu- and magnNP-Cu-soils, the physiological and biochemical impacts of excess copper are clearly identified, resulting in growth retardation, decreased pigment contents and photosynthetic efficiency, and increased lipid peroxidation and peroxidase (POD) activities. Based on magnetic susceptibility, a higher amount of magnNPs is detected after 57 days in the roots of magnNP-exposed plants (1400 mg kg^-1) than in the roots of magnNP-Cu-exposed plants (920 mg kg^-1). In the latter, magnNP internalization is likely hampered because of the plants' physiological responses to Cu toxicity. At the working Cu and magnNP concentrations, magnNPs neither decrease Cu accumulation in the plant tissues nor alleviate the overall growth retardation of sunflowers and certain phytotoxic effects induced by excess Cu. However, this study highlights several positive environmental aspects relative to magnNP use, including the harmless effects of magnNPs on sunflowers (1% magnNPs in soil) and the ability of magnNPs to influence Cu mobility in the soil (which could be even more pronounced at lower Cu concentration).

Emerging investigator series: automated single-nanoparticle quantification and classification: a holistic study of particles into and out of wastewater treatment plants in Switzerland

Single particle inductively coupled plasma time-of-flight mass spectrometry (sp-ICP-TOFMS), in combination with online microdroplet calibration, allows for the determination of particle number concentrations (PNCs) and the amount (i.e. mass) of ICP-MS-accessible elements in individual particles. Because sp-ICP-TOFMS analyses of environmental samples produce rich datasets composed of both single-metal nanoparticles (smNPs) and many types of multi-metal NPs (mmNPs), interpretation of these data is well suited to automated analysis schemes. Here, we present a new data analysis approach that includes: 1. automatic particle detection and elemental mass determinations based on online microdroplet calibration, 2. correction of false (randomly occurring) multi-metal associations caused by measurement of coincident but distinct NPs, and 3. unsupervised clustering analysis of mmNPs to identify unique classes of NPs based on their element compositions. To demonstrate the potential of our approach, we analyzed water samples collected from the influent and effluent of five wastewater treatment plants (WWTPs) across Switzerland. We determined elemental masses in individual NPs, as well as PNCs, to estimate the NP removal efficiencies of the individual WWTPs. From WWTP samples collected at two points in time, we found an average of 90% and 94% removal efficiencies of single-metal and multi-metal NPs, respectively. Between 5% to 27% of detected NPs were multi-metal; the most abundant particle types were those rich in Ce-La, Fe-Al, Ti-Zr, and Zn-Cu. Through hierarchical clustering, we identified NP classes conserved across all WWTPs, as well as particle types that are unique to one or a few WWTPs. These uniquely occurring particle types may represent point sources of anthropogenic NPs. We describe the utility of clustering analysis of mmNPs for identifying natural, geogenic NPs, and also for the discovery of new, potentially anthropogenic, NP targets.

Cytotoxicity and DNA damage evaluation of TiO2 and ZnO nanoparticles. Uptake in lung cells in culture

The cytotoxicity and DNA damage of titanium dioxide and zinc oxide nanoparticles (TiO₂ and ZnO NPs) have been studied in a human lung carcinoma cell line (A549) after 24 h exposure. TiO₂ and ZnO NPs had mean diameters of 12.9 ± 2.8 and 24.1 ± 8.0 nm, respectively. ZnO NPs reduced cell viability from 250 μg/mL, increasing reactive oxygen species (ROS) and decreased GSH/GSSG ratio. The comet assay detected DNA damage from 50 μg/mL. TiO₂ NPs induced cytotoxicity and DNA damage from 50 to 100 μg/mL, respectively, along with a decrease of the GSH/GSSG ratio. Both particles were found inside the cells, within membrane-bound vesicles. The internalization mechanism is promoted partially by caveolae-mediated endocytosis and, in the case of TiO₂ NPs, also by macropinocytosis.

A comparison of the removal efficiencies of Myriophyllum spicatum L. for zinc oxide nanoparticles (ZnO NP) in different media: a microcosm approach

The phytoremediation potential of Myriophyllum spicatum L. has been well documented for bulk-sized heavy metals, including zinc (Zn). However, there is no information on the removal efficiencies of this aquatic macrophyte for zinc oxide nanoparticles contaminated waters. Therefore, the present study was aimed to compare the removal efficiency of M. spicatum in two different media: tap water and pond water. Results were evaluated by comparing percentage (%) removal and goodness-of-fit to regression models. Plants were exposed to 0.8 and 2 ppm nano-sized Zn for 1, 4, and 7 days. The zinc concentrations were monitored using ICP-MS. The %removal in tap water ranged between 29.5 and 70.3%, and slightly higher in pond water. Modeling results confirmed that there was a strong relationship between removal performance and exposure duration. Time-dependent removal shows that %removal shows no further progress after 4 days. Our results also indicate that planktonic communities in pond water might play an important role in the fate of ZnO NPs.

Novel environmentally friendly fuel: The effect of adding graphene quantum dot (GQD) nanoparticles with ethanol-biodiesel blends on the performance and emission characteristics of a diesel engine

Biodiesel fuel has some disadvantages including increase in NO_x, poor atomization and incomplete combustion. Additives and catalysts can be used to reduce the negative effects of biodiesel fuel. In addition, the use of metal oxide and metal nanoparticles causes environmental hazards. However, using biodegradable nanoparticles can significantly reduce such concerns. The present study investigated the effect of adding GQD + E to B10 fuel on the emission and performance characteristics of a diesel engine. B10 was blended with GQD (90 ppm) and bioethanol (E2, E4, E6 and E8% vol). Performance and emission characteristics, including power, torque, SFC, CO, CO₂, UHC and NO_x emissions were measured at the speeds of 1800, 2100 and 2400 rpm and full load mode. According to the results, the addition of GQD + E to B10 improved torque and power and decreased SFC, CO, UHC and NO_x. Finally, the B10 + E6 + GQD90 fuel was the best fuel regarding improved engine performance and reduced exhaust emission. The average of changes in power and torque, SFC, CO, UHC and NO_x compared to D100 for B10 + E6 + GQD90 were + 15.69%, +15.39%, -17.58%, -30.30%, -38.91% and -1.54%, respectively.

Recent Developments in the Application of Nanomaterials in Agroecosystems

Nanotechnology implies the scientific research, development, and manufacture, along with processing, of materials and structures on a nano scale. Presently, the contamination of metalloids and metals in the soil has gained substantial attention. The consolidation of nanomaterials and plants in ecological management has received considerable research attention because certain nanomaterials could enhance plant seed germination and entire plant growth. Conversely, when the nanomaterial concentration is not properly controlled, toxicity will definitely develop. This paper discusses the role of nanomaterials as: (1) nano-pesticides (for improving the plant resistance against the biotic stress); and (2) nano-fertilizers (for promoting the plant growth by providing vital nutrients). This review analyzes the potential usages of nanomaterials in agroecosystem. In addition, the adverse effects of nanomaterials on soil organisms are discussed. We mostly examine the beneficial effects of nanomaterials such as nano-zerovalent iron, iron oxide, titanium dioxide, nano-hydroxyapatite, carbon nanotubes, and silver- and copper-based nanomaterials. Some nanomaterials can affect the growth, survival, and reproduction of soil organisms. A change from testing/using nanomaterials in plants for developing nanomaterials depending on agricultural requirements would be an important phase in the utilization of nanomaterials in sustainable agriculture. Conversely, the transport as well as ecological toxicity of nanomaterials should be seriously examined for guaranteeing its benign usage in agriculture.

Long-Term Toxicity of ZnO Nanoparticles on Scenedesmus rubescens Cultivated in Semi-Batch Mode

The scope of this study was to investigate the toxic effects of zinc oxide (ZnO) nanoparticles (NPs) on freshwater microalgae, in long-term semi-batch feeding mode at two different hydraulic retention times (HRTs) (20 and 40 days). A freshwater microalgae, Scenedesmus rubescens, was employed and exposed to a semi-continuous supply of ZnO NPs at a low concentration of 0.081 mg/L for a period of 28 d. Experiments were conducted under controlled environmental conditions. Τhe impact of ZnO NPs on S. rubescens, which was assessed in terms of nutrient removal, biomass growth, and algal lipid content. Semi-batch mode cultures showed that low ZnO NP concentrations at an HRT of 40 d did not have any negative effect on microalgae growth after the fourth day of culture. In contrast, algal growth was inhibited up to 17.5% at an HRT of 20 d in the presence of ZnO NPs. This might be attributed to the higher flow rate applied and ZnO NPs load. A positive correlation between nutrient removal and microalgae growth was observed. The algal lipid content was, in most cases, higher in the presence of ZnO NPs at both HRTs, indicating that even low ZnO NPs concentration cause stress resulting in higher lipid content.

Nanotechnology in soil remediation - applications vs. implications

Engineered nanomaterials (ENMs) and nanotechnology have shown great potential in addressing complex problems and creating innovative approaches in soil remediation due to their unique features of high reactivity, selectivity and versatility. Meanwhile, valid concerns exist with regard to their implications towards the terrestrial environment and the ecosystem. This review summarizes: (i) the applications and the corresponding mechanisms of various types of ENMs for soil remediation; (ii) the environmental behavior of ENMs in soils and their interactions with the soil content; (iii) the environmental implications of ENMs during remedial applications. The overall objective is to promote responsible innovations so as to take optimal advantage of ENMs and nanotechnology while minimizing their adverse effects to the ecological system. It is critical to establish sustainable remediation methods that ensure a healthy and safe environment without bringing additional risk.

Comparative developmental toxicity of iron oxide nanoparticles and ferric chloride to zebrafish (Danio rerio) after static and semi-static exposure

Iron oxide nanoparticles (IONPs) are used in several medical and environmental applications, but their mechanism of action and hazardous effects to early developmental stages of fish remain unknown. Thus, the present study aimed to assess the developmental toxicity of citrate-functionalized IONPs (γ-Fe₂O₃ NPs), in comparison with its dissolved counterpart, in zebrafish (Danio rerio) after static and semi-static exposure. Embryos were exposed to environmental concentrations of both iron forms (0.3, 0.6, 1.25, 2.5, 5 and 10 mg L^-1) during 144 h, jointly with negative control group. The interaction and distribution of both Fe forms on the external chorion and larvae surface were measured, following by multiple biomarker assessment (mortality, hatching rate, neurotoxicity, cardiotoxicity, morphological alterations and 12 morphometrics parameters). Results showed that IONPs were mainly accumulated on the zebrafish chorion, and in the digestive system and liver of the larvae. Although the IONPs induced low embryotoxicity compared to iron ions in both exposure conditions, these nanomaterials induced sublethal effects, mainly cardiotoxic effects (reduced heartbeat, blood accumulation in the heart and pericardial edema). The semi-static exposure to both iron forms induced high embryotoxicity compared to static exposure, indicating that the nanotoxicity to early developmental stages of fish depends on the exposure system. This is the first study concerning the role of the exposure condition on the developmental toxicity of IONPs on fish species.

Quantitative investigation of ZnO nanoparticle dissolution in the presence of δ-MnO2

The widespread use of zinc oxide nanoparticles (ZnO NPs), the second most produced nanomaterial, inevitably leads to their release into the environment. In this study, dissolution and transformation of ZnO NPs in the presence of δ-MnO₂, an abundant and ubiquitous manganese (Mn) oxide mineral, was investigated via a suite of techniques covering bulk to molecular scales. Dissolution kinetics indicated that the presence of δ-MnO₂ significantly affected ZnO NP dissolution rate/trend and equilibrium Zn²⁺ concentration, which were found to be mainly dependent on the concentration and mass ratio of ZnO NPs and δ-MnO₂. Approximately 300 mg ZnO NPs per g δ-MnO₂ was expected for ZnO NP uptake at pH 7.0 via ZnO NP dissolution and surface Zn²⁺ adsorption. X-ray diffraction (XRD), ζ potential, high-resolution transmission electron microscopy (HR-TEM), and Zn K-edge X-ray absorption spectroscopy (XAS) results revealed that when the mole content of ZnO NPs was less than the total adsorption sites of δ-MnO₂ surface, ZnO NPs were completely dissolved and adsorbed on δ-MnO₂ surface in the form of inner-sphere complexes. A fraction of ZnO NPs persisted when the mole ratio of ZnO to δ-MnO₂ further increased. These results suggest that the transformation and fate of ZnO NPs is affected by environment-relevant minerals such as Mn oxides due to their huge capacity of fixing dissolved metal cations at the surface or interlayer structure.

Transformation pathways and fate of engineered nanoparticles (ENPs) in distinct interactive environmental compartments: A review

The ever increasing production and use of nano-enabled commercial products release the massive amount of engineered nanoparticles (ENPs) in the environment. An increasing number of recent studies have shown the toxic effects of ENPs on different organisms, raising concerns over the nano-pollutants behavior and fate in the various environmental compartments. After the release of ENPs in the environment, ENPs interact with various components of the environment and undergoes dynamic transformation processes. This review focus on ENPs transformations in the various environmental compartments. The transformation processes of ENPs are interrelated to multiple environmental aspects. Physical, chemical and biological processes such as the homo- or hetero-agglomeration, dissolution/sedimentation, adsorption, oxidation, reduction, sulfidation, photochemically and biologically mediated reactions mainly occur in the environment consequently changes the mobility and bioavailability of ENPs. Physico-chemical characteristics of ENPs (particle size, surface area, zeta potential/surface charge, colloidal stability, and core-shell composition) and environmental conditions (pH, ionic strength, organic and inorganic colloids, temperature, etc.) are the most important parameters which regulated the ENPs environmental transformations. Meanwhile, in the environment, organisms encountered multiple transformed ENPs rather than the pristine nanomaterials due to their interactions with various environmental materials and other pollutants. Thus it is the utmost importance to study the behavior of transformed ENPs to understand their environmental fate, bioavailability, and mode of toxicity.

Insights into the transcriptional responses of a microbial community to silver nanoparticles in a freshwater microcosm

Silver nanoparticles (AgNPs) are widely used because of their excellent antibacterial properties. They are, however, easily discharged into the water environment, causing potential adverse environmental effects. Meta-transcriptomic analyses are helpful to study the transcriptional response of prokaryotic and eukaryotic aquatic microorganisms to AgNPs. In the present study, microcosms were used to investigate the toxicity of AgNPs to a natural aquatic microbial community. It was found that a 7-day exposure to 10 μg L^-1 silver nanoparticles (AgNPs) dramatically affected the structure of the microbial community. Aquatic micro eukaryota (including eukaryotic algae, fungi, and zooplankton) and bacteria (i.e., heterotrophic bacteria and cyanobacteria) responded differently to the AgNPs stress. Meta-transcriptomic analyses demonstrated that eukaryota could use multiple cellular strategies to cope with AgNPs stress, such as enhancing nitrogen and sulfur metabolism, over-expressing genes related to translation, amino acids biosynthesis, and promoting bacterial-eukaryotic algae interactions. By contrast, bacteria were negatively affected by AgNPs with less signs of detoxification than in case of eukaryota; various pathways related to energy metabolism, DNA replication and genetic repair were seriously inhibited by AgNPs. As a result, eukaryotic algae (mainly Chlorophyta) dominated over cyanobacteria in the AgNPs treated microcosms over the 7-d exposure. The present study helps to understand the effects of AgNPs on aquatic microorganisms and provides insights into the contrasting AgNPs toxicity in eukaryota and bacteria.

Development of a comprehensive understanding of aggregation-settling movement of CeO2 nanoparticles in natural waters

Parameters such as the settling rate, aggregation rate, and collision frequency in predictive models used to describe the fate of nanoparticles (NPs) are very important for the risk assessment of NPs in the environment. In this study, CeO₂ NPs were chosen as the model particles to investigate such parameters through aggregation-settling experiments under environmentally relevant conditions. The results indicate that natural colloids (Ncs) have no effect on the settling of NPs in seawaters, whereas they stabilize the NPs at a low initial particle concentration and promote the heteroaggregation of NPs at a high initial particle concentration in lake waters. In all cases, a suspended sediment absorbs the NPs and Ncs as mixed aggregates, resulting in a rapid settling. Furthermore, the calculation results of the model indicate that the shear force increases the collision frequency of the NPs by 4-5 orders of magnitude higher than that in quiescent waters. However, the break-up effect by the shear force is more obvious, namely, the shear force hinders the aggregation of NPs in natural waters, instead of promoting aggregation. Remarkably, a negative value of the dis-heteroaggregation rate based on the combined von Smoluchowski-Stokes equation can reflect the hindering effect on the aggregation process. The results of this study will provide scientific and accurate guidance for the parameter selection in the existing prediction model and contribute to a prediction of the fate and transport of NPs in the environment.

Surface modifications at the oxide/water interface: Implications for Cu binding, solution chemistry and chemical stability of iron oxide nanoparticles

The oxidation of magnetite into maghemite and its coating by natural organic constituents are common changes that affect the reactivity of iron oxide nanoparticles (IONP) in aqueous environments. Certain ubiquitous compounds such as humic acids (HA) and phosphatidylcholine (PC), displaying a high affinity for both copper (Cu) and IONP, could play a critical role in the interactions involved between both compounds. The adsorption of Cu onto four different IONP was studied: magnetite nanoparticles (magnNP), maghemite NP (maghNP), HA- and PC-coated magnetite NP (HA-magnNP and PC-magnNP, respectively). According to the results, the percentage of adsorbed Cu increases with increasing pH, irrespective of the IONP. Thus, protonation/deprotonation reactions are likely involved within Cu adsorption mechanism. Contrary to the other studied IONP, HA-magnNP favor Cu adsorption at most of the pH tested including acidic pH (pH = 3), suggesting that part of the active surface sites for Cu²⁺ were not grabbed by protons. The Freundlich adsorption isotherm of HA-magnNP provides the highest sorption constant K_F (bonding energy) and n value which supports a heterogeneous sorption process. The heterogeneous adsorption between HA-magnNP and Cu²⁺ can be explained by both the diversity of the binding sites HA procured and the formation of multidendate complexes between Cu²⁺ and some of the HA functional groups. Such favorable adsorption process was neither observed on PC-coated-magnNP nor on maghNP, whose behaviors were comparable to that of magnNP. On another hand, HA and PC coatings considerably reduced iron (Fe) dissolution from magnNP as compared with magnNP. It was suggested that HA and PC coatings either provided efficient shield against Fe leaching or fostered dissolved Fe re-adsorption onto the functional groups at the coated magnNP surfaces. Thus, this study can help to better understand the complex interfacial reactions between cations-organic matter-colloidal surfaces which are relevant in environmental and agricultural contexts. This work showed that magnetite NP properties can be affected by surface modifications, which drive NP chemical stability and Cu adsorption, thereby affecting the global water chemistry.

Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry

Failure of dental treatments is mainly due to the biofilm accumulated on the dental materials. Many investigations have been conducted on the advancements of antimicrobial dental materials. Polymeric and inorganic nanoscopical agents are capable of inhibiting microorganism proliferation. Applying them as fillers in dental materials can achieve enhanced microbicidal ability. The present review provides a broad overview on the state-of-the-art research in the field of antimicrobial fillers which have been adopted for incorporation into dental materials over the last 5 years. The antibacterial agents and applications are described, with the aim of providing information for future investigations. STATEMENT OF SIGNIFICANCE: Microbial infection is the primary cause of dental treatment failure. The present review provides an overview on the state-of-art in the field of antimicrobial nanoscopical or polymeric fillers that have been applied in dental materials. Trends in the biotechnological development of these antimicrobial fillers over the last 5 years are reviewed to provide a backdrop for further advancement in this field of research.

Engineered metal oxide nanomaterials inhibit corneal epithelial wound healing in vitro and in vivo

Ocular exposure to metal oxide engineered nanomaterials (ENMs) is common as exemplified by zinc oxide (ZnO), a major constituent of sunscreens and cosmetics. The ocular surface that includes the transparent cornea and its protective tear film are common sites of exposure for metal ENMs. Despite the frequency of exposure of the ocular surface, there is a knowledge gap regarding the effects of metal oxide ENMs on the cornea in health and disease. Therefore, we studied the effects of metal oxide ENMs on the cornea in the presence or absence of injury. Cell viability of immortalized human corneal epithelial (hTCEpi) cells was assessed following treatment with 11 metal oxide ENMs with a concentration ranging from 0.5 to 250 μg/mL for 24 hours. An epithelial wound healing assay with a monolayer of hTCEpi cells was then performed using 11 metal oxide ENMs at select concentrations based on data from the viability assays. Subsequently, based on the in vitro results, in vivo testing of precorneal tear film (PTF) quantity and stability as well as a corneal epithelial wound healing were tested in the presence or absence ZnO or vanadium pentoxide (V₂O₅) at a concentration of 50 μg/mL. We found that WO₃, ZnO, V₂O₅ and CuO ENMs significantly reduced hTCEpi cell viability in comparison to vehicle control or the other metal oxide ENMs tested. Furthermore, ZnO and V₂O₅ ENMs also significantly decreased hTCEpi cell migration. Although ZnO and V₂O₅ did not alter PTF parameters of rabbits in vivo, corneal epithelial wound healing was significantly delayed by topical ZnO while V₂O₅ did not alter wound healing. Finally, hyperspectral images confirmed penetration of ZnO and V₂O₅ through all corneal layers and into the iris stroma. Considering the marked epithelial toxicity and corneal penetration of ZnO, further investigations on the impact of this ENM on the eye are warranted.

High-resolution mass spectrometry-based metabolomics reveal the disruption of jasmonic pathway in Arabidopsis thaliana upon copper oxide nanoparticle exposure

Mass-spectrometry based metabolomics has recently emerged as a valuable technique in understanding the ecotoxicity and mode of action of a wide range of xenobiotics in the environment, including engineered nanomaterials (ENMs). However, the applications of metabolomics in elucidating the biochemical pathways affected by xenobiotics have been mostly performed using targeted analysis. In this study, the effects of copper oxide nanoparticles (CuO NPs) on Arabidopsis thaliana, a model plant, was investigated using untargeted metabolite profiling based on two platforms of high-resolution mass spectrometry (MS): (1) liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QToF-MS) and (2) LC Q Exactive™ Hybrid Quadrupole-Orbitrap™-MS (LC-Orbitrap-MS). This approach was performed to identify specific features (mass-to-charge ratios, m/z's) that are significantly changed in a reproducible manner regardless of the MS platform used in metabolomics. In addition, the total copper concentrations taken up in plant tissues were quantified using inductively coupled plasma mass spectrometry (ICP-MS), which provided evidence of translocation of CuO NPs from roots to leaves and flowering shoots. Results from untargeted metabolomics showed that there were 65 plant metabolites that were altered commonly in both LC/MS platforms resulting from CuO NPs exposure of Arabidopsis thaliana. These metabolites belong to the jasmonic acid and glucosinolates pathways, suggesting the stress response induced by CuO NPs in Arabidopsis. This study demonstrated the effectiveness of high-resolution LC/MS in providing insight on the mechanism of nanotoxicity of CuO NPs in plants.

Effects of Exogenous N-Acyl-Homoserine Lactone as Signal Molecule on Nitrosomonas Europaea under ZnO Nanoparticle Stress

Despite the adverse effects of emerging ZnO nanoparticles (nano-ZnO) on wastewater biological nitrogen removal (BNR) systems being widely documented, strategies for mitigating nanoparticle (NP) toxicity impacts on nitrogen removal have not been adequately addressed. Herein, N-acyl-homoserine lactone (AHL)-based quorum sensing (QS) was investigated for its effects against nano-ZnO toxicity to a model nitrifier, Nitrosomonas europaea. The results indicated that AHL-attenuated nano-ZnO toxicity, which was inversely correlated with the increasing dosage of AHL from 0.01 to 1 µM. At 0.01 µM, AHL notably enhanced the tolerance of N. europaea cells to nano-ZnO stress, and the inhibited cell proliferation, membrane integrity, ammonia oxidation rate, ammonia monooxygenase activity and amoA gene expression significantly increased by 18.2 ± 2.1, 2.4 ± 0.9, 58.7 ± 7.1, 32.3 ± 1.7, and 7.3 ± 5.9%, respectively, after 6 h of incubation. However, increasing the AHL dosage compromised the QS-mediated effects and even aggravated the NPs’ toxicity effects. Moreover, AHLs, at all tested concentrations, significantly increased superoxide dismutase activity, indicating the potential of QS regulations to enhance cellular anti-oxidative stress capacities when facing NP invasion. These results provide novel insights into the development of QS regulation strategies to reduce the impact of nanotoxicity on BNR systems.

TiO2 nanoparticles affect the bacterial community structure and Eisenia fetida (Savigny, 1826) in an arable soil

The amount of nanoparticles (NP), such as TiO₂, has increased substantially in the environment. It is still largely unknown, however, how NP might interact with earthworms and organic material and how this might affect the bacterial community structure and their functionality. Therefore, an arable soil was amended with TiO₂ NP at 0, 150 or 300 mg kg⁻¹ and subjected to different treatments. Treatments were soil amended with ten earthworms (Eisenia fetida (Savigny, 1826)) with fully developed clitellum and an average fresh mass of 0.5 to 500 g dry soil, 1.75 g tyndallized Quaker^® oat seeds Avena sativa (L.) kg⁻¹, or earthworms plus oat seeds, or left unamended. The bacterial community structure was monitored throughout the incubation period. The bacterial community in the unamended soil changed over time and application of oats, earthworm and a combination of both even further, with the largest change found in the latter. Application of NP to the unamended soil and the earthworm-amended soil altered the bacterial community, but combining it by adding oats negated that effect. It was found that the application of organic material, that is, oats, reduced the effect of the NP applied to soil. However, as the organic material applied was mineralized by the soil microorganisms, the effect of NP increased again over time.

Cytotoxicity and global transcriptional responses induced by zinc oxide nanoparticles NM 110 in PMA-differentiated THP-1 cells

Despite a wide production and use of zinc oxide nanoparticles (ZnONP), their toxicological study is only of limited number and their impact at a molecular level is seldom addressed. Thus, we have used, as a model, zinc oxide nanoparticle NM110 (ZnO110NP) exposure to PMA-differentiated THP-1 macrophages. The cell viability was studied at the cellular level using WST-1, LDH and Alamar Blue^® assays, as well as at the molecular level by transcriptomic analysis. Exposure of cells to ZnO110NP for 24 h decreased their viability in a dose-dependent manner with mean inhibitory concentrations (IC₅₀) of 8.1 μg/mL. Transcriptomic study of cells exposed to two concentrations of ZnO110NP: IC₅₀ and a quarter of it (IC₅₀/4) for 4 h showed that the expressions of genes involved in metal metabolism are perturbed. In addition, expression of genes acting in transcription regulation and DNA binding, as well as clusters of genes related to protein synthesis and structure were altered. It has to be noted that the expressions of metallothioneins genes (MT1, MT2) and genes of heat-shock proteins genes (HSP) were strongly upregulated for both conditions. These genes might be used as an early marker of exposure to ZnONP. On the contrary, at IC₅₀ exposure, modifications of gene expression involved in inflammation, apoptosis and mitochondrial suffering were noted indicating a less specific cellular response. Overall, this study brings a resource of transcriptional data for ZnONP toxicity for further mechanistic studies.

Factors impacting the interactions of engineered nanoparticles with bacterial cells and biofilms: Mechanistic insights and state of knowledge

Since their advent a few decades ago, engineered nanoparticles (ENPs) have been extensively used in consumer products and industrial applications and their use is expected to continue at the rate of thousands of tons per year in the next decade. The widespread use of ENPs poses a potential risk of large scale environmental proliferation of ENPs which can impact and endanger environmental health and safety. Recent studies have shown that microbial biofilms can serve as an important biotic component for partitioning and perhaps storage of ENPs released into aqueous systems. Considering that biofilms can be one of the major sinks for ENPs in the environment, and that the field of biofilms itself is only three to four decades old, there is a recent and growing body of literature investigating the ENP-biofilm interactions. While looking at biofilms, it is imperative to consider the interactions of ENPs with the planktonic microbial cells inhabiting the bulk systems in the vicinity of surface-attached biofilms. In this review article, we attempt to establish the state of current knowledge regarding the interactions of ENPs with bacterial cells and biofilms, identifying key governing factors and interaction mechanisms, as well as prominent knowledge gaps. Since the context of ENP-biofilm interactions can be multifarious-ranging from ecological systems to water and wastewater treatment to dental/medically relevant biofilms- and includes devising novel strategies for biofilm control, we believe this review will serve an interdisciplinary audience. Finally, the article also touches upon the future directions that the research in the ENP-microbial cells/biofilm interactions could take. Continued research in this area is important to not only enhance our scientific knowledge and arsenal for biofilm control, but to also support environmental health while reaping the benefits of the 'nanomaterial revolution'.

Impact of Phosphate Adsorption on Complex Cobalt Oxide Nanoparticle Dispersibility in Aqueous Media

A commonly overlooked and largely unknown aspect of assessing the environmental and biological safety of engineered nanomaterials is their transformation in aqueous systems. Complex metal oxides are an important class of materials for catalysis, energy storage, and water purification. However, the potential impact of nano complex metal oxides on the environment upon improper disposal is not well understood. We present a comprehensive analysis of the interaction of an environmentally relevant oxyanion, phosphate, with a complex metal oxide nanomaterial, lithium cobalt oxide. Our results show that adsorption of phosphate to the surface of these materials drastically impacts their surface charge, rendering them more stable in aqueous systems. The adsorbed phosphate remains on the surface over significant periods of time, suggesting that desorption is not kinetically favored. The implications of this interaction may be increased dispersibility and bioavailability of these materials in environmental water systems.