Effect of rhamnolipid solubilization on hexadecane bioavailability: enhancement or reduction?

Microbe cultivation guidelines to optimize rhamnolipid applications

In the growing landscape of interest in natural surfactants, selecting the appropriate one for specific applications remains challenging. The extensive, yet often unsystematized, knowledge of microbial surfactants, predominantly represented by rhamnolipids (RLs), typically does not translate beyond the conditions presented in scientific publications. This limitation stems from the numerous variables and their interdependencies that characterize microbial surfactant production. We hypothesized that a computational recipe for biosynthesizing RLs with targeted applicational properties could be developed from existing literature and experimental data. We amassed literature data on RL biosynthesis and micellar solubilization and augmented it with our experimental results on the solubilization of triglycerides (TGs), a topic underrepresented in current literature. Utilizing this data, we constructed mathematical models that can predict RL characteristics and solubilization efficiency, represented as logPRL = f(carbon and nitrogen source, parameters of biosynthesis) and logMSR = f(solubilizate, rhamnolipid (e.g. logPRL), parameters of solubilization), respectively. The models, characterized by robust R2 values of respectively 0.581-0.997 and 0.804, enabled the ranking of descriptors based on their significance and impact-positive or negative-on the predicted values. These models have been translated into ready-to-use calculators, tools designed to streamline the selection process for identifying a biosurfactant optimally suited for intended applications.

Performance evaluation of rhamnolipid biosurfactant produced by Pseudomonas aeruginosa and its effect on marine oil-spill remediation

This study aimed to reveal that the effect of biosurfactant on the dispersion and degradation of crude oil. Whole genome analysis showed that Pseudomonas aeruginosa GB-3 contained abundant genes involved in biosurfactant synthesis and metabolic processes and had the potential to degrade oil. The biosurfactant produced by strain GB-3 was screened by various methods. The results showed that the surface tension reduction activity was 28.6 mN·m-1 and emulsification stability was exhibited at different pH, salinity and temperature. The biosurfactant was identified as rhamnolipid by LC-MS and FTIR. The fermentation conditions of strain GB-3 were optimized by response surface methodology, finally the optimal system (carbon source: glucose, nitrogen source: ammonium sulfate, C/N ratio:16:1, pH: 7, temperature: 30-35 °C) was determined. Compared with the initial fermentation, the yield of biosurfactant increased by 4.4 times after optimization. In addition, rhamnolipid biosurfactant as a dispersant could make the dispersion of crude oil reach 38% within seven days, which enhanced the bioavailability of crude oil. As a biostimulant, it could also improve the activity of indigenous microorganism and increase the degradation rate of crude oil by 10-15%. This study suggested that rhamnolipid biosurfactant had application prospect in bioremediation of marine oil-spill.

Effects of the polyhalogenated carbazoles 3-bromocarbazole and 1,3,6,8-tetrabromocarbazole on soil microbial communities

Soil ecosystems are being more contaminated with polyhalogenated carbazoles (PHCZs), which raising much attention about their impact on soil microorganisms. 3-Bromocarbazole (3-BCZ) and 1,3,6,8-tetrabromocarbazole (1,3,6,8-TBCZ) are two typical PHCZs with high detection rates in the soil environment. However, ecological risk research on these two PHCZs in soil is still lacking. In the present study, after 80 days of exposure, the ecological influence of 3-BCZ and 1,3,6,8-TBCZ was investigated based on 16S rDNA sequencing, ITS sequencing, gene (16S rDNA, ITS, amoA, nifH, narG and cbbL) abundance and soil enzyme activity. The results showed that the bacterial 16S rDNA gene abundance significantly decreased under 3-BCZ and 1,3,6,8-TBCZ exposure after 80 days of incubation. The fungal ITS gene abundance significantly decreased under 1,3,6,8-TBCZ (10 mg/kg) exposure. PHCZs contributed to the alteration of bacteria and fungi community abundance. Bacteria Sphingomonas, RB41 and fungus Mortierella, Cercophora were identified as the most dominant genera. The two PHCZs consistently decreased the relative abundance of Sphingomonas, Lysobacter, Dokdonella, Mortierella and Cercophora etc at 80th day. These keystone taxa are related to the degradation of organic compounds, carbon metabolism, and nitrogen metabolism and may thus have influence on soil ecological functions. Bacterial and fungal functions were estimated using functional annotation of prokaryotic taxa (FAPROTAX) and fungi functional guild (FUNGuild), respectively. The nitrogen and carbon metabolism pathway were affected by 3-BCZ and 1,3,6,8-TBCZ. The soil nitrogen-related functions of aerobic ammonia oxidation were decreased but the soil carbon-related functions of methanol oxidation, fermentation, and hydrocarbon degradation were increased at 80th day. The effects of 3-BCZ and 1,3,6,8-TBCZ on the abundances of the amoA, nifH, narG, and cbbL genes showed a negative trend. These results elucidate the ecological effects of PHCZs and extend our knowledge on the structure and function of soil microorganisms in PHCZ-contaminated ecosystems.

Microbial remediation of oil-contaminated shorelines: a review

Frequent marine oil spills have led to increasingly serious oil pollution along shorelines. Microbial remediation has become a research hotspot of intertidal oil pollution remediation because of its high efficiency, low cost, environmental friendliness, and simple operation. Many microorganisms are able to convert oil pollutants into non-toxic substances through their growth and metabolism. Microorganisms use enzymes' catalytic activities to degrade oil pollutants. However, microbial remediation efficiency is affected by the properties of the oil pollutants, microbial community, and environmental conditions. Feasible field microbial remediation technologies for oil spill pollution in the shorelines mainly include the addition of high-efficiency oil degrading bacteria (immobilized bacteria), nutrients, biosurfactants, and enzymes. Limitations to the field application of microbial remediation technology mainly include slow start-up, rapid failure, long remediation time, and uncontrolled environmental impact. Improving the environmental adaptability of microbial remediation technology and developing sustainable microbial remediation technology will be the focus of future research. The feasibility of microbial remediation techniques should also be evaluated comprehensively.

Study on persulfate activated by Ce-modified tea waste biochar to degrade tetracycline

In this study, the Ce-modified tea residue biochar (Ce-TBC) was successfully generated and applied to the biochar/persulfate system (Ce-TBC/PDS), the mechanism of the removal of tetracycline (TC) using Ce-TBC/PDS was elaborated. Under the optimal experimental conditions (Ce-TBC = 0.8 g L^-1, PDS = 4 mM, TC = 10 mg L^-1), the removal efficiency of TC was 91.28%, and after 5 cycles, the elimination rate of Ce-TBC/PDS still reached up to 80%. The mechanism of TC removal by Ce-TBC/PDS was analyzed by scanning electron microscopy (SEM), X-ray diffractometer (XRD), Fourier infrared transform spectrometer (FT-IR), and X-ray photoelectron spectrometer (XPS) characterization, and influence factor experiments. The results showed that the introduction of CeO_x increased the oxygen vacancies on the TBC surface and promoted the interconversion between Ce³⁺ and Ce⁴⁺ for better activation of PDS and generation of active species. Free radical quenching experiments and paramagnetic resonance spectrometry (EPR) analysis showed that the non-radical pathway ¹O₂ played a dominant role in the Ce-TBC/PDS system. The present work provided an efficient means of PDS activator and recycling of tea waste.

Application of sludge biochar nanomaterials in Fenton-like processes: Degradation of organic pollutants, sediment remediation, sludge dewatering

In today's society, wastewater sludge has become solid waste, and the preparation of wastewater sludge into sludge biochar nanomaterials (SBCs) for resource utilization has become a promising method. SBCs have advantages over other biomasses, including their complex composition, wide range of raw materials, and especially the presence of various transition metals with catalytic properties. Heterogeneous Fenton processes using SBCs as catalyst carriers have shown great potential in the removal of pollutants. In this review, the synthesis methods of SBCs are reviewed and the effects of different synthesis methods on their physicochemical properties are discussed. Furthermore, the successful applications of raw SBCs, metal-modified SBCs, and Fenton sludge-SBCs in organic pollutant degradation, sediment remediation, and sludge dewatering are reviewed. The mechanisms occurring with different metals as active sites are explored, and the review shows that the degradation efficiency and stability of SBCs are very satisfactory. We also provide an outlook on the future development of SBCs. We hope that this review will help readers gain a clearer and deeper understanding of SBCs and promote the development of SBCs.

Effect of rhamnolipids on the biodegradation of m-dichlorobenzene in biotrickling filters: Performance and mechanism

In this study, the effect of rhamnolipids (RL) on m-dichlorobenzene (m-DCB) removal and biofilm was investigated in two biotrickling filters (BTF) (BTF1: blank control; BTF2: RL addition). The critical micelle concentration (CMC) value of RL was 75.6 mg L^-1, and the RL could significantly improve the solubilization of m-DCB. The results showed that the optimal concentration of RL was 180 mg L^-1. The removal efficiency (RE) of m-DCB dropped by 42.4% for BTF1 no fed with RL and only 28.2% for BTF2 fed with RL when the inlet concentration increased from 200 to 1400 mg m^-3 at an empty bed time (EBRT) of 60 s. RL increased the secretion of extracellular polymers (EPS) and the ratio of Protein/Polysaccharide, which improved the mass transfer of m-DCB to the biofilm. RL also had a facilitating effect on catechol-1,2-dioxygenase (C₁₂O) enzyme activity. Furthermore, RL increased Zeta potential and facilitated microorganisms to form biofilm. The dominant microorganisms of microbial community were increased and the application of RL promoted the enrichment of them.

The application of transition metal-modified biochar in sulfate radical based advanced oxidation processes

Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) is a very important chemical oxidation technology for the degradation of recalcitrant organic pollutants in water and has been well developed. Recently, transition metals or their oxides-modified biochar has been widely used as the catalyst to catalyze peroxymonosulfate (PMS) and peroxydisulfate (PS) in SR-AOPs due to their outstanding properties (e.g., large surface area, high stability, abound catalytic sites, and diversity of material design, etc.). These composite materials not only combine the respective beneficial characteristics of biochar and transition metals (or their oxides) but also often present synergistic effects between the components. In this review, we present the synthesis of different types of transition metal (or metal oxides)/biochar-based catalysts and their application in SR-AOPs. The catalytic mechanism, including the generation process of free radicals and other reaction pathways on the surface of the catalyst were also carefully discussed. Particular attention has been paid to the synergistic effects between the components that result in enhanced catalytic performance. At the end of this review, the future development prospects of this technology are proposed.

Production and Characterization of Rhamnolipids Produced by Pseudomonas aeruginosa DBM 3774: Response Surface Methodology Approach

Rhamnolipids are extensively studied biosurfactants due to their potential in many industrial applications, eco-friendly production and properties. However, their availability for broader application is severely limited by their production costs, therefore the optimization of efficacy of their cultivation gains significance as well as the information regarding the physio-chemical properties of rhamnolipids resulting from various cultivation strategies. In this work, the bioprocess design focused on optimization of the rhamnolipid yield of Pseudomonas aeruginosa DBM 3774 utilizing the response surface methodology (RSM). Six carbon sources were investigated for their effect on the rhamnolipid production. The RSM prediction improved the total rhamnolipid yield from 2.2 to 13.5 g/L and the rhamnolipid productivity from 11.6 to 45.3 mg/L/h. A significant effect of the carbon source type, concentration and the C/N ratio on the composition of the rhamnolipid congeners has been demonstrated for cultivation of P. aeruginosa DBM 3774 in batch cultivation. Especially, changes in presence of saturated fatty acid in the rhamnolipid congeners, ranging from 18.8% of unsaturated fatty acids (carbon source glycerol; 40 g/L) to 0% (sodium citrate 20 g/L) were observed. This demonstrates possibilities of model based systems as basis in cultivation of industrially important compounds like biosurfactants rhamnolipids and the importance of detailed study of interconnection between cultivation conditions and rhamnolipid mixture composition and properties.

When bimetallic oxides and their complexes meet Fenton-like process

The heterogeneous Fenton-like reaction is an advanced oxidation process, which is widely recognized for its efficient removal of recalcitrant organic contaminants. In recent years, the construction of efficient and reusable heterogeneous Fenton-like catalysts has been extensively investigated. Recently, the use of bimetallic oxides and their complexes as catalysts for Fenton-like reaction has attracted intense attention due to their high catalytic performance and excellent stability over a wide pH range. In this article, the fundamental mechanisms of Fenton-like reactions were briefly introduced. The important reports on bimetallic oxides and their complexes are classified in detail, which are mainly divided into Fe-based and Fe-free bimetallic catalysts. We then focused in depth on the performance of their respective applications in Fenton-like reactions. Special consideration has been given to the respective contributions and synergistic mechanisms of the two metals in catalysts. Overall, it is concluded that synergistic effect of the two metals in the bimetallic catalyst can boost the utilization of hydrogen peroxide, provide adequate accessible active sites, which are all beneficial to improve catalytic performance. Finally, the current challenges in this field were proposed. Our review is expected to provide help for the application of bimetallic oxides and their complexes.

Temporal changes of microbial community structure and nitrogen cycling processes during the aerobic degradation of phenanthrene

Phenanthrene (PHE) is frequently detected in worldwide soils. But it is still not clear that how the microbial community succession happens and the nitrogen-cycling processes alter during PHE degradation. In this study, the temporal changes of soil microbial community composition and nitrogen-cycling processes during the biodegradation of PHE (12 μg g^-1) were explored. The results showed that the biodegradation of PHE followed the second-order kinetics with a half-life of 7 days. QPCR results demonstrated that the bacteria numbers increased by 67.1%-194.7% with PHE degradation, whereas, no significant change was observed in fungi numbers. Thus, high-throughput sequencing based on 16 S rRNA was conducted and showed that the abundances of Methylotenera, Comamonadaceae, and Nocardioides involved in PHE degradation and denitrification were significantly increased, while those of nitrogen-metabolism-related genera such as Nitrososphaeraceae, Nitrospira, Gemmatimonadacea were decreased in PHE-treated soil. Co-occurrence network analysis suggested that more complex interrelations were constructed, and Proteobacteria instead of Acidobacteriota formed intimate associations with other microbes in responding to PHE exposure. Additionally, the abundances of nifH and narG were significantly up-regulated in PHE-treated soil, while that of amoA especially AOAamoA was down-regulated. Finally, correlation analysis found several potential microbes (Methylotenera, Comamonadaceae, and Agromyces) that could couple PHE degradation and nitrogen transformation. This study confirmed that PHE could alter microbial community structure, change the native bacterial network, and disturb nitrogen-cycling processes.

Toxic Effects of Thallium on Biological Indicators of Haplic Chernozem Health: A Case Study

Thallium (Tl) was introduced into Haplic Chernozem in the amounts of 3, 30, and 300 mg/kg, and biological indicators were observed at 10, 30, and 90 days after incubation in the laboratory experiment. An increase in biological activities; i.e., the total number of bacteria, Azotobacter spp. abundance, enzymes (catalase, dehydrogenases), and phytotoxic indicators (germination rate of radish) after 30 days of Tl exposure were noted. The total number of bacteria and Azotobacter spp. abundance, enzyme activity, and phytotoxicity were more sensitive (16–76%) and informative (12–65%) indicators compared to the control, respectively. Integral biological indicators of soil state (IIBS) noted at 10, 30, and 90 days decreased at a dose of 30 and 300 mg/kg by 13–43% in relation to the control. An increase in Tl concentration and duration of exposure (up to 90 days) inhibited biological properties and caused ecotoxicological effects, respectively. We concluded that the use of individual indicators served as an indicator of the state of the soil.

Boron nitride quantum dots decorated MIL-100(Fe) for boosting the photo-generated charge separation in photocatalytic refractory antibiotics removal

Metal organic frameworks (MOFs) have great potential for photocatalysis, but only possess moderate activity due to their slow charge transfer and low solar energy conversion. Herein, heterostructures photocatalysts constructed by boron nitride quantum dots (BNQDs) and MIL-100(Fe) (MNB) were successfully fabricated for overcoming these shortcomings. It was indicated that the composites possessed large surface area, mesoporous structure, and enhanced visible light absorption. The MNB photocatalysts exhibited excellent photocatalytic activity for tetracycline hydrochloride (TC-HCl) degradation under visible light irradiation. Compared with MIL-100(Fe), the photodegradation rate of TC-HCl by MNB-1 was 0.02383 min^-1, which was 5.3 times higher than that of pure MIL-100(Fe). The close contact of MIL-100(Fe) with BNQDs and the synergistic effect between them were the main reasons for the improved photodegradation performance. This study reveals that a rational combination of MIL-100(Fe) and BNQDs can improve photocatalytic activity to enhance molecular oxygen activation. Therefore, it is reasonable to believe that quantum dots/MOFs photocatalysts have great potential in environmental remediation.

Influence of Silver Nanoparticles on the Biological Indicators of Haplic Chernozem

In recent years, silver nanoparticles (AgNPs) are increasingly used in various industries due to their antibacterial properties, which lead to an increase in pollution of the environment and soil ecosystems. However, the ecological effects of soil pollution by AgNPs were poorly studied than that with AgNPs of other metal-based NPs. The aim of this study is to assess the influence of AgNPs on the biological properties of Haplic Chernozem. Silver was introduced into the soil in the form of AgNPs with a concentration of 0.5; 1; 5; 10; 50, and 100 mg/kg in laboratory conditions. The influence of AgNPs on the biological properties of Haplic Chernozem was assessed 30 days after contamination. The degree of reduction in biological properties depends on the AgNPs concentration in the soil. This study showed that the sensitivity to contamination by AgNPs in the total number of bacteria and enzymatic activity was more than that in the abundance of bacteria of the genus Azotobacter. The integrated index of biological state (IIBS) of Haplic Chernozem was decreased by contamination with AgNPs. Silver nanoparticles in the concentration of 10 mg/kg caused a decrease in the indicator by 13% relative to the control. It also decreased IIBS by doses of 50 and 100 mg/kg by 22 and 27% relative to the control. All used biological indicators could be used for biomonitoring, biodiagnosis, bioindication, and regulation of ecological condition of soil contamination by AgNPs.

Nanotechnology in Wastewater Management: A New Paradigm Towards Wastewater Treatment

Clean and safe water is a fundamental human need for multi-faceted development of society and a thriving economy. Brisk rises in populations, expanding industrialization, urbanization and extensive agriculture practices have resulted in the generation of wastewater which have not only made the water dirty or polluted, but also deadly. Millions of people die every year due to diseases communicated through consumption of water contaminated by deleterious pathogens. Although various methods for wastewater treatment have been explored in the last few decades but their use is restrained by many limitations including use of chemicals, formation of disinfection by-products (DBPs), time consumption and expensiveness. Nanotechnology, manipulation of matter at a molecular or an atomic level to craft new structures, devices and systems having superior electronic, optical, magnetic, conductive and mechanical properties, is emerging as a promising technology, which has demonstrated remarkable feats in various fields including wastewater treatment. Nanomaterials encompass a high surface to volume ratio, a high sensitivity and reactivity, a high adsorption capacity, and ease of functionalization which makes them suitable for application in wastewater treatment. In this article we have reviewed the techniques being developed for wastewater treatment using nanotechnology based on adsorption and biosorption, nanofiltration, photocatalysis, disinfection and sensing technology. Furthermore, this review also highlights the fate of the nanomaterials in wastewater treatment as well as risks associated with their use.

Remediation of soils contaminated by hydrophobic organic compounds: How to recover extracting agents from soil washing solutions?

A lot of soil (particularly, former industrial and military sites) has been contaminated by various highly toxic contaminants such as petroleum hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), polychlorobiphenyls (PCBs) or chlorinated solvents. Soil remediation is now required for their promotion into new industrial or real estate activities. Therefore, the soil washing (SW) process enhanced by the use of extracting agents (EAs) such as surfactants or cyclodextrins (CDs) has been developed for the removal of hydrophobic organic compounds (HOCs) from contaminated soils. The use of extracting agents allows improving the transfer of HOCs from the soil-sorbed fraction to the washing solution. However, using large amount of extracting agents is also a critical drawback for cost-effectiveness of the SW process. The aim of this review is to examine how extracting agents might be recovered from SW solutions for reuse. Various separation processes are able to recover large amounts of extracting agents according to the physicochemical characteristics of target pollutants and extracting agents. However, an additional treatment step is required for the degradation of recovered pollutants. SW solutions may also undergo degradation processes such as advanced oxidation processes (AOPs) with in situ production of oxidants. Partial recovery of extracting agents can be achieved according to operating conditions and reaction kinetics between organic compounds and oxidant species. The suitability of each process is discussed according to the various physicochemical characteristics of SW solutions. A particular attention is paid to the anodic oxidation process, which allows either a selective degradation of the target pollutants or a complete removal of the organic load depending on the operating conditions.

Transmembrane transport mechanism of n-hexadecane by Candida tropicalis: Kinetic study and proteomic analysis

Yeasts are the most predominant petroleum hydrocarbon-degrading fungi isolated from petroleum-contaminated soil. However, information of the transmembrane transport of petroleum hydrocarbon into yeast cells is limited. The present study was designed to explore the transmembrane transport mechanisms of the typical petroleum hydrocarbon n-hexadecane in Candida tropicalis cells with petroleum hydrocarbon biodegradation potential. Yeast cells were treated with n-hexadecane in different scenarios, and the percentage of intracellular n-hexadecane and transport dynamics were investigated accordingly. The intracellular concentration of n-hexadecane increased within 15 min, and transportation was inhibited by NaN₃, an ATPase inhibitor. The uptake kinetics of n-hexadecane were well fitted by the Michaelis-Menten model, and Kt values ranged from 152.49 to 194.93 mg/L. All these findings indicated that n-hexadecane might cross the yeast cells in an energy-dependent manner and exhibit an affinity with the cell transport system. Moreover, the differentially expressed membrane proteins induced by n-hexadecane were identified and quantified by tandem mass tag labeling coupled with liquid chromatography tandem mass spectrometry analysis. The proteome analysis results demonstrated that energy production and conversion accounted for a large proportion of the functional classifications of the differentially expressed proteins, providing further evidence that sufficient energy supply is essential for transmembrane transport. Protein functional analysis also suggested that differentially expressed proteins associated with transmembrane transport processes are clearly enriched in endocytosis and phagosome pathways (p < 0.05), and the analysis supported the notion that the underlying transmembrane transport mechanism might be associated with endocytosis and phagosome pathways, revealing a new mechanism of n-hexadecane internalization by Candida tropicalis.

Towards Rational Biosurfactant Design-Predicting Solubilization in Rhamnolipid Solutions

The efficiency of micellar solubilization is dictated inter alia by the properties of the solubilizate, the type of surfactant, and environmental conditions of the process. We, therefore, hypothesized that using the descriptors of the aforementioned features we can predict the solubilization efficiency, expressed as molar solubilization ratio (MSR). In other words, we aimed at creating a model to find the optimal surfactant and environmental conditions in order to solubilize the substance of interest (oil, drug, etc.). We focused specifically on the solubilization in biosurfactant solutions. We collected data from literature covering the last 38 years and supplemented them with our experimental data for different biosurfactant preparations. Evolutionary algorithm (EA) and kernel support vector machines (KSVM) were used to create predictive relationships. The descriptors of biosurfactant (logP_BS, measure of purity), solubilizate (logP_sol, molecular volume), and descriptors of conditions of the measurement (T and pH) were used for modelling. We have shown that the MSR can be successfully predicted using EAs, with a mean R² _val of 0.773 ± 0.052. The parameters influencing the solubilization efficiency were ranked upon their significance. This represents the first attempt in literature to predict the MSR with the MSR calculator delivered as a result of our research.

Production, functional stability, and effect of rhamnolipid biosurfactant from Klebsiella sp. on phenanthrene degradation in various medium systems

The present study investigated the stability and efficacy of a biosurfactant produced by Klebsiella sp. KOD36 under extreme conditions and its potential for enhancing the solubilization and degradation of phenanthrene in various environmental matrices. Klebsiella sp. KOD36 produced a mono-rhamnolipids biosurfactant with a low critical micelle concentration (CMC) value. The biosurfactant was stable under extreme conditions (60 °C, pH 10 and 10% salinity) and could lower surface tension by 30% and maintained an emulsification index of > 40%. The emulsion index was also higher (17-43%) in the presence of petroleum hydrocarbons compared to synthetic surfactant Triton X-100. Investigation on phenanthrene degradation in three different environmental matrices (aqueous, soil-slurry and soil) confirmed that the biosurfactant enhanced the solubilization and biodegradation of phenanthrene in all matrices. The high functional stability and performance of the biosurfactant under extreme conditions on phenanthrene degradation show the great potential of the biosurfactant for remediation applications under harsh environmental conditions.

Surfactant addition in diesel oil degradation - how can it help the microbes?

PURPOSE

Despite wide research on bioremediation of hydrocarbon-contaminated soil, the mechanisms of surfactant-enhanced bioavailability of the contaminants are still unclear. The presented study was focused on the in-depth description of relationships between hydrocarbons, bacteria, and surfactants. In order to that, the biodegradation experiments and cell viability measurements were conducted, and the properties of cell surface were characterized.

METHODS

MTT assay was employed to measure plant extracts toxicity to microbes. Then, membrane permeability changes were evaluated, followed by diesel oil biodegradation in the presence of surfactants measurements by GCxGC-TOFMS and PCR-RAPD analysis.

RESULTS

Our study undoubtedly proves that different surfactants promote assimilation of different groups of hydrocarbons and modify cell surface properties in different ways. Increased biodegradation of diesel oil was observed when cultures with Acinetobacter calcoaceticus M1B were supplemented with Saponaria officinalis and Verbascum nigrum extracts. Interestingly, these surfactants exhibit different influences on cell surface properties and their viability in contrast to the other surfactants. Moreover, the preliminary analyses have shown changes in the genome caused by exposure to surfactants.

CONCLUSIONS

The results indicated that the benefits of surfactant use may be related to deep modification at the omics level, not only that of cell surface properties and confirms the complexity of the interactions between bacterial cells, pollutants and surfactants.

Remediation of crude oil-contaminated coastal marsh soil: Integrated effect of biochar, rhamnolipid biosurfactant and nitrogen application

Decontamination of oil spills from coastal wetland soils requires a delicate approach. A microcosm study was carried out to investigate the impact of integrated application of biochar, rhamnolipid (RL) biosurfactant and nitrogen (N) on petroleum hydrocarbon remediation in a Louisiana coastal saline marsh and their impact on soil microbial community. The soil was artificially contaminated with crude oil and subjected to treatments of different combinations of sugarcane residue biochar, RL, and coated urea. Total petroleum hydrocarbons (TPH) in the contaminated soil were analyzed periodically using gas chromatograph and associated soil bacterial community was studied using 16 s rRNA sequencing technologies. Results showed that integrated application of biochar + RL, biochar + N, and biochar + N+RL reduced 32.3%, 73.2%, 80.9% of TPH, respectively, and exhibited synergic interaction with higher efficiency than application individually. Combined treatments showed distinct functions that biochar increased the sorption of aromatic compounds, while RL and N enhanced the degradation of heavy and light aliphatic compounds. All remediation treatments caused reduction of soil bacterial diversity while RL and N shifted the microbial community to higher abundances of Proteobacteria and Bacteroidetes, respectively. Overall, the findings of this study demonstrate the positivity of applying integrated biochar, biosurfactant, and N treatment in oil remediation in wetland soils.

Biosurfactants: Production and application prospects in the food industry

There has been considerable interest in the use of biosurfactants due to the diversity of structures and the possibility of production from a variety of substrates. The potential for industrial applications has been growing, as these natural compounds are tolerant to common processing methods and can compete with synthetic surfactants with regards to the capacity to reduce surface and interfacial tensions as well as stabilise emulsions while offering the advantages of biodegradability and low toxicity. Among biosurfactant-producing microorganisms, some yeasts present no risks of toxicity or pathogenicity, making them ideal for use in food formulations. Indeed, the use of these biomolecules in foods has attracted industrial interest due to their properties as emulsifiers and stabilizers of emulsions. Studies have also demonstrated other valuable properties, such as antioxidant and antimicrobial activity, enabling the aggregation of greater value to products and the avoidance of contamination both during and after processing. All these characteristics allow biosurfactants to be used as additives and versatile ingredients for the processing of foods. The present review discusses the potential application of biosurfactants as emulsifying agents in food formulations, such as salad dressing, bread, cakes, cookies, and ice cream. The antioxidant, antimicrobial and anti-adhesive properties of these biomolecules are also discussed, demonstrating the need for further studies to make the use of the natural compounds viable in this expanding sector.

Bioremediation of PAH-Contaminated Soils: Process Enhancement through Composting/Compost

Bioremediation of contaminated soils has gained increasing interest in recent years as a low-cost and environmentally friendly technology to clean soils polluted with anthropogenic contaminants. However, some organic pollutants in soil have a low biodegradability or are not bioavailable, which hampers the use of bioremediation for their removal. This is the case of polycyclic aromatic hydrocarbons (PAHs), which normally are stable and hydrophobic chemical structures. In this review, several approaches for the decontamination of PAH-polluted soil are presented and discussed in detail. The use of compost as biostimulation- and bioaugmentation-coupled technologies are described in detail, and some parameters, such as the stability of compost, deserve special attention to obtain better results. Composting as an ex situ technology, with the use of some specific products like surfactants, is also discussed. In summary, the use of compost and composting are promising technologies (in all the approaches presented) for the bioremediation of PAH-contaminated soils.

Different submicellar solubilization mechanisms revealed by 1H NMR and 2D diffusion ordered spectroscopy (DOSY)

Different submicellar solubilization mechanisms of two systems, Triton X-100 (TX-100)/tetradecane and sodium dodecyl sulfate (SDS)/butyl methacrylate, are revealed on the molecular scale by ¹H NMR spectroscopy and 2D diffusion ordered spectroscopy (DOSY). It is evident that the apparent solubilities of both tetradecane and butyl methacrylate are enhanced, even at much lower surfactant concentrations than the CMCs. Solubilized solutes also contribute to the early formation of surfactant micelles. In general, the molar solubilization ratios (MSRs) of both solutes linearly increase as the surfactant concentrations increase. However, variations in MSRs of the two systems are different below and above the CMC, which is probably related to the different solubilization mechanisms. For TX-100/tetradecane, as the TX-100 concentration increases, the tetradecane resonance in the independent state transforms into that of the aggregated state and the corresponding evolution of diffusions is shown in the 2D DOSY spectra. These results demonstrate that below the CMC, tetradecane is first solubilized in TX-100 solutions, and then solubilized in TX-100 micelles above the CMC. For SDS/butyl methacrylate, the appearance of oligomeric SDS resonances below the CMC indicates that butyl methacrylate is partially solubilized in SDS oligomers. Then, when the CMC is reached, the dominant, monomeric SDS molecules aggregate into oligomers, and the similar diffusivity trend of butyl methacrylate with that of SDS indicates that a proportion of butyl methacrylate molecules are solubilized in it. Finally, the fusion of SDS resonances in the two states and the tendency of co-diffusion of SDS and butyl methacrylate indicate that all the SDS molecules gradually aggregate into micelles, and almost all the butyl methacrylate molecules are solubilized in them. In conclusion, above the CMCs, the solubilization manners of these two systems are similar. However, they are different below CMCs. The solubilization of tetradecane by TX-100 is driven by the intermolecular hydrophobic interaction, i.e., molecular-pair formation. However, the polar interaction between functional groups of butyl methacrylate and the polar head of SDS contributes to the solubilization of butyl methacrylate. The different submicellar solubilization mechanisms are mainly caused by the different properties of solutes and surfactants, which also results in different MSRs and solubilization sites in the micelles.

Use of a biostimulant obtained from okara in the bioremediation of a soil polluted by used motor car oil

In this manuscript we studied in the laboratory the bioremediation effects of a biostimulant obtained from okara by enzymatic hydrolysis processes in a soil polluted with used motor-car oil at a rate of 1 % (w/w) over an 89-day period. The biostimulant was added to the soil 6 times during the incubation period at a rate of 2 %. Dehydrogenase activity and the evolution of polycyclic aromatic hydrocarbons (PAHs) and pseudo total heavy metals in soil were studied. The successive applications of the biostimulant to the polluted soil gradually increased PAHs degradation during the experimental period. Thus, at the end of the experiment, the application of the biostimulant decreased the concentration of naphthalene in soil by 74 %, while PAHs with 3, 4, 5 and 6 aromatic rings had been reduced by around 58 %, 44 %, 30 % and 23 %, respectively. This degradation is possibly due to the high number of low molecular weight peptides (<300 Da) in the biostimulant which are readily available for PAHs-tolerant soil microorganisms that accelerate the degradation of the said toxins. The concentration of heavy metals in the oil used was not very high and consequently the dehydrogenase activity was not negatively affected.

Distorted polymeric carbon nitride via carriers transfer bridges with superior photocatalytic activity for organic pollutants oxidation and hydrogen production under visible light

Polymeric carbon nitride (PCN) has become the most promising metal-free photocatalysts but its activity is low. Molecule doping of PCN has been proved to be an effective strategy to achieve high photocatalytic performance. Herein, we report a bottom-up method to synthesize modified PCN, which includes 2,5-dibromopyrazine doping, thermal-induced exfoliation and condensation/polymerization. The incorporation of electron-deficiency 2,5-dibromopyrazine into the PCN framework can effectively tune the electronic structures and improve the charge-carrier separation. In addition, the incorporation of 2,5-dibromopyrazine induced significant structural changes from planar symmetric to distortion. The optimized pyrazine doped PCN showed a reaction rate enhancement of 4-fold for the degradation of sulfamethazine compared to that of conventional urea-based PCN. Further reactive species and degradation intermediate detection studies, indicated that O₂^- was generated during the photocatalytic process, which could lead to the decomposition, and finally mineralization of sulfamethazine. 2,5-Dibromopyrazine doped PCN also leads to a 6.3-fold improvement in H₂ generation with the visible light. Especially, phytotoxicity experiments showed that the toxicity of sulfamethazine after degradation is greatly reduced, and the as-prepared photocatalyst is environmentally friendly.

Microbial Degradation of Hydrocarbons-Basic Principles for Bioremediation: A Review

Crude oil-derived hydrocarbons constitute the largest group of environmental pollutants worldwide. The number of reports concerning their toxicity and emphasizing the ultimate need to remove them from marine and soil environments confirms the unceasing interest of scientists in this field. Among the various techniques used for clean-up actions, bioremediation seems to be the most acceptable and economically justified. Analysis of recent reports regarding unsuccessful bioremediation attempts indicates that there is a need to highlight the fundamental aspects of hydrocarbon microbiology in a clear and concise manner. Therefore, in this review, we would like to elucidate some crucial, but often overlooked, factors. First, the formation of crude oil and abundance of naturally occurring hydrocarbons is presented and compared with bacterial ability to not only survive but also to utilize such compounds as an attractive energy source. Then, the significance of nutrient limitation on biomass growth is underlined on the example of a specially designed experiment and discussed in context of bioremediation efficiency. Next, the formation of aerobic and anaerobic conditions, as well as the role of surfactants for maintaining appropriate C:N:P ratio during initial stages of biodegradation is explained. Finally, a summary of recent scientific reports focused on the removal of hydrocarbon contaminants using bioaugmentation, biostimulation and introduction of surfactants, as well as biosurfactants, is presented. This review was designed to be a comprehensive source of knowledge regarding the unique aspects of hydrocarbon microbiology that may be useful for planning future biodegradation experiments. In addition, it is a starting point for wider debate regarding the limitations and possible improvements of currently employed bioremediation strategies.

Remediation of Multiply Contaminated Ground via Permeable Reactive Barrier and Electrokinetic Using Recyclable Food Scrap Ash (FSA)

A study of the application of electrokinetic (EK) remediation and Permeable Reactive Barriers (PRB) using recyclable Foods Scrap Ash (FSA) in multiple contaminated soils was carried out. An FSA was chosen as a PRB fill material due to its highly efficient capacity for contaminant removal. Acetic acid and Brij30 were used as enhancers on copper and phenanthrene, respectively, to improve EK remediation performance in removing the heavy metal and organic contaminants. Copper adsorption in PRB was so substantial that the confirmed removal efficiency was 83.86–90.17% and the remaining amount was 105–212 mg. While a high removal efficiency of acetic acid was observed on copper in multiple contamination soils; the removal of phenanthrene was hardly detected and the recovery rate of the contaminant was low during pretreatment. Therefore; an additional study of pretreatment on the phenanthrene-contaminated kaolinite needs to be performed.

Biosurfactants, natural alternatives to synthetic surfactants: Physicochemical properties and applications

Biosurfactants comprise a wide array of amphiphilic molecules synthesized by plants, animals, and microbes. The synthesis route dictates their molecular characteristics, leading to broad structural diversity and ensuing functional properties. We focus here on low molecular weight (LMW) and high molecular weight (HMW) biosurfactants of microbial origin. These are environmentally safe and biodegradable, making them attractive candidates for applications spanning cosmetics to oil recovery. Biosurfactants spontaneously adsorb at various interfaces and self-assemble in aqueous solution, resulting in useful physicochemical properties such as decreased surface and interfacial tension, low critical micellization concentrations (CMCs), and ability to solubilize hydrophobic compounds. This review highlights the relationships between biosurfactant molecular composition, structure, and their interfacial behavior. It also describes how environmental factors such as temperature, pH, and ionic strength can impact physicochemical properties and self-assembly behavior of biosurfactant-containing solutions and dispersions. Comparison between biosurfactants and their synthetic counterparts are drawn to illustrate differences in their structure-property relationships and potential benefits. Knowledge of biosurfactant properties organized along these lines is useful for those seeking to formulate so-called green or natural products with novel and useful properties.

Advances in the application, toxicity and degradation of carbon nanomaterials in environment: A review

Carbon nanomaterials (CNMs) are novel nanomaterials with excellent physicochemical properties, which are widely used in biomedicine, energy and sensing. Besides, CNMs also play an important role in environmental pollution control, which can absorb heavy metals, antibiotics and harmful gases. However, CNMs are inevitably entering the environment while they are rapidly developing. They are harmful to living organisms in the environment and are difficult to degrade under natural conditions. Here, we systematically describe the toxicity of carbon nanotubes (CNTs), graphene (GRA) and C₆₀ to cells, animals, humans, and microorganisms. According to the current research results, the toxicity mechanism is summarized, including oxidative stress response, mechanical damage and effects on biological enzymes. In addition, according to the latest research progress, we focus on the two major degradation methods of chemical degradation and biodegradation of CNTs, GRA and C₆₀. Meanwhile, the reaction conditions and degradation mechanisms of degradation are respectively stated. Moreover, we have prospects for the limitations of CNM degradation under non-experimental conditions and their potential application.

Heterogeneous Fenton-like catalyst for treatment of rhamnolipid-solubilized hexadecane wastewater

The treatment of wastewater containing hydrophobic organic pollutants solubilized by surfactants is of great environmental importance. In this work, the removal of rhamnolipid-solubilized hexadecane via a salicylic acid-methanol-acetone modified steel converter slag (SMA-SCS) catalyzed Fenton-like process was studied. First, we investigated the adsorption of rhamnolipid and hexadecane onto SCS and SMA-modified SCS. Compared to that of SCS, SMA-SCS exhibited better adsorption performance with maximum adsorption capacities of 0.23 and 0.28 mg/g for hexadecane and rhamnolipid, respectively. Degradation experiments showed that hexadecane was more readily degraded by the Fenton-like process than rhamnolipid. Up to 81.1% of hexadecane removal was achieved over 20 g/L of SMA-SCS within 24 h, whereas only 36% of rhamnolipid was degraded. On the other hand, the results indicated that increased rhamnolipid concentration had a negative effect on the degradation of hexadecane. During the oxidation reaction, the pH value of solution remained between 6.0 and 6.72. All these results demonstrated that the SMA-SCS/H₂O₂ Fenton-like process could be a cost-effective and promising approach for the treatment of surfactant-solubilized hydrophobic organic compounds.

Microbial Surfactants: The Next Generation Multifunctional Biomolecules for Applications in the Petroleum Industry and Its Associated Environmental Remediation

Surfactants are a broad category of tensio-active biomolecules with multifunctional properties applications in diverse industrial sectors and processes. Surfactants are produced synthetically and biologically. The biologically derived surfactants (biosurfactants) are produced from microorganisms, with Pseudomonas aeruginosa, Bacillus subtilis Candida albicans, and Acinetobacter calcoaceticus as dominant species. Rhamnolipids, sophorolipids, mannosylerithritol lipids, surfactin, and emulsan are well known in terms of their biotechnological applications. Biosurfactants can compete with synthetic surfactants in terms of performance, with established advantages over synthetic ones, including eco-friendliness, biodegradability, low toxicity, and stability over a wide variability of environmental factors. However, at present, synthetic surfactants are a preferred option in different industrial applications because of their availability in commercial quantities, unlike biosurfactants. The usage of synthetic surfactants introduces new species of recalcitrant pollutants into the environment and leads to undesired results when a wrong selection of surfactants is made. Substituting synthetic surfactants with biosurfactants resolves these drawbacks, thus interest has been intensified in biosurfactant applications in a wide range of industries hitherto considered as experimental fields. This review, therefore, intends to offer an overview of diverse applications in which biosurfactants have been found to be useful, with emphases on petroleum biotechnology, environmental remediation, and the agriculture sector. The application of biosurfactants in these settings would lead to industrial growth and environmental sustainability.

Characterization and removal of antibiotic residues by NFC-doped photocatalytic oxidation from domestic and industrial secondary treated wastewaters in Meric-Ergene Basin and reuse assessment for irrigation

Antibiotics are important contaminants that have become an increasingly big problem due to the discharge of the receiving environment. The presence of these organic based pollutants in influent wastewater can inhibit the biological processes and resist to degradation in wastewater treatment plants. Moreover, the consumption of agricultural products, irrigated with water containing antibiotic residues, leads to major harmful effects to the human body through the food chain. In this study; firstly, a conventional characterization was made in terms of COD, TOC, SS, color and of antibiotic residue characterization of untreated raw (influent) and biologically treated (effluent) water from domestic and industrial wastewater treatment plants located in the Meriç-Ergene Basin. After that, photocatalytic activity test was run under visible light for selected antibiotics (Erythromycin, Ciprofloxacin, Sulphametoxasol) which were detected by HPLC MS/MS in excess amount. Finally, for the photocatalytic oxidation, a new generation NFC (Nitrogen-Floride-Carbon)-doped titanium dioxide photocatalyst, which has never been studied in the literature before, was prepared according to the sol-gel method without using thermal processing. Photocatalysts were characterized by UV-vis DRS reflectance and Laser Raman Spectra measurements. All other analyzes were made according to the standard methods. Considering the conventional characterization results; investigated domestic wastewaters exhibited moderate characteristics while industrial wastewater samples had strong characteristics in terms of COD, TOC and SS pollution in accordance with the literature. By the way, contrary to expectations, antibiotic residue results have proved that the effluent wastewater contains more antibiotics than the influent. This can be explained by the fact that, some antibiotics in domestic wastewaters are probably already trapped in feces and cannot be purified by conventional systems since they are released after biological treatment, as mentioned similar studies in the literature. Moreover, by means of 7 h NFC-doped photocatalytic oxidation under visible light, beside approximately % 62 to %79 COD and 62%-86% TOC removal, %99 to %100 removal of antibiotic residue was provided. According to these results, domestic and industrial secondary treated wastewaters in Meric-Ergene Basin can be advance treated, succesfully, with NFC-doped photocatalyst to remove antibiotic residues besides conventional pollutants. This result show that Meriç-Ergene discharge criteria determined by Forest and Water Ministry of Turkey can be provided with this new type photocatalytic process and healthy reuse of this river for irrigation will be possible.

Differences of cell surface characteristics between the bacterium Pseudomonas veronii and fungus Ophiostoma stenoceras and their different adsorption properties to hydrophobic organic compounds

The first step of microbial biodegradation is the adsorption of pollutants on the microorganisms' surface, which is determined by the microorganism type and pollutant hydrophobicity. One fungus Ophiostoma stenoceras LLC and one bacterium Pseudomonas veronii ZW were chosen for the investigation of cell surface hydrophobicity and adsorption abilities to various organic compounds. Results showed that the fungus could better capture and adsorb organic compounds in liquid and gas phases, and the adsorption was a physical monolayer adsorption process. Much smaller partition coefficient for gas-fungus suggested that direct gaseous adsorption was preferred. The XPS (X-ray photoelectron spectroscopy) characterization further confirmed that several functional groups changed after the adsorption of compounds. The time taken for complete degradation of hexane, tetrahydrofuran and chlorobenzene was shorter with the addition of O. stenoceras LLC. Such findings are useful in exploring the special cell surface of fungus in adsorption and bioenhancement for organic treatment of organic contaminants using bacteria.

Continuous degradation of phenanthrene in cloud point system by reuse of Sphingomonas polyaromaticivorans cells

Extractive biodegradation of phenanthrene by Sphingomonas polyaromaticivorans was previously carried out in cloud point system (CPS). In this study, we explored the possibility of further increasing the efficiency of the culture by repeatedly reusing cells and the system for biodegradation. Three different recycling strategies were adopted. In reuse of cells plus CPS, cells were reused for 3 times while maintaining high degradation rates (> 90%). Thereafter, the accumulation of metabolites in the dilute phase resulted in a decrease in cell viability. This inhibition was avoided in recycling the cells plus coacervate phase by replacing the dilute phase with fresh Medium. However, due to the slow adaptation of the cells to the new degradation environment and the reduction in the volume of the coacervate phase, the cells were only reused twice and their activity decreased. However, the same long degradation cycle (5 days) as the reuse of cells plus coacervate phase reduced the overall degradation efficiency of phenanthrene. Finally, a combined strategy of 3 times of cells plus CPS reuse and individual cells reuse once was employed and run for two cycles. 3 rounds of reuse of cells plus CPS improved cells utilization and phenanthrene degradation efficiency. Then, the subsequent round of reuse of cells alone relieved the effect of increasing metabolites on cell viability. This study provides a potential application for reusing cells to continuously degrade phenanthrene in soil and water in CPS.

Immobilization of laccase on hollow mesoporous carbon nanospheres: Noteworthy immobilization, excellent stability and efficacious for antibiotic contaminants removal

In this study, the hollow mesoporous carbon spheres (HMCs) were synthesized and modified for laccase (Lac) immobilization, and the structural characteristics of HMCs materials were determined by FESEM, TEM and FTIR etc. The maximum loading of Lac on the HMCs materials could reach 835 mg/g, meanwhile, the immobilized Lac exhibited excellent thermo-stability, pH stability, storage stability and reusability. The antibiotics removal experiments indicated that the immobilized Lac possess efficient removal efficiency for both tetracycline hydrochloride (TCH) and ciprofloxacin hydrochloride (CPH) in the presence of redox mediator. The synergy of the adsorption by HMCs and the degradation by Lac could be the reasons for the high removal of antibiotics. Meanwhile, for investigating degradation mechanism, the degradation product analysis and molecular docking method had been introduced to this study. According to the degradation products, dehydroxylation and demethylation are major degradation reactions for TCH degradation, and the oxidation of the piperazinyl substituent and hydroxylation are the major degradation for CPH degradation. The docking results showed that some important residues played the key role in the degradation process. This study indicated that the immobilization of Lac on HMCs could be potentially applied in environmental remediation of antibiotics.

Effects of rhamnolipids on the removal of 2,4,2,4-tetrabrominated biphenyl ether (BDE-47) by Phanerochaete chrysosporium analyzed with a combined approach of experiments and molecular docking

Effects of rhamnolipids on the removal of 2,4,2,4-tetrabrominated biphenyl ether (BDE-47) by Phanerochaete chrysosporium (P. chrysosporium) had been investigated, as well as the influence of carbon source (i.e. glucose). The results showed that the removal efficiency was over 90% in all treatments in 7 d. Rhamnolipids at low concentrations (0.05 and 0.1 CMC (critical micelle concentration)) could promote the removal of BDE-47, however, the inhibition effects occurred at high concentrations (0.5 and 1.0 CMC). The further study indicated that rhamnolipids at low concentrations not only promote the growth of mycelium, but also had obvious promotion on ligninolytic enzymes activity (i.e. manganese peroxidase (MnP), lignin peroxidase (LiP) and laccase (Lac)), especially for MnP and Lac. However, the opposite effect was generated at high rhamnolipids concentrations. Meanwhile, glucose played an active role for BDE-47 removal. For better understanding the degradation mechanism, the degradation product analysis and molecular docking had been introduced to this study. The degradation product analysis indicated that OH-PBDEs were the major degradation products and hydroxylation should be the important degradation pathway. The docking results showed that the ideal binding conformation occurred between ligninolytic enzymes and BDE-47, and hydrophobic interactions were the main interaction. Moreover, hydrogen bonds and hydrophobic interactions both existed in ligninolytic enzymes and rhamnolipids interaction. That might be the reason that rhamnolipids affected enzymes activity. These results indicated that P. chrysosporium might be a type of ideal microorganisms in the removal of BDE-47 pollution, and rhamnolipids could be a type of additives for better removal efficiency.

Effect of surfactants on the interaction of phenol with laccase: Molecular docking and molecular dynamics simulation studies

Some surfactants can enhance the removal of phenol by laccase (Lac) in various industrial effluents. Their behavior and function in the biodegradation of phenolic wastewater have been experimentally reported by many researchers, but the underlying molecular mechanism is still unclear. Therefore, the interaction mechanisms of phenol with Lac from Trametes versicolor were investigated in the presence or absence of Triton X-100 (TX100) or rhamnolipid (RL) by molecular docking and molecular dynamics (MD) simulations. The results indicate that phenol contacts with an active site of Lac by hydrogen bonds (HBs) and van der Waals (vdW) interactions in aqueous solution for maintaining its stability. The presence of TX100 or RL results in the significant changes of enzymatic conformations. Meanwhile, the hydrophobic parts of surfactants contact with the outside surface of Lac. These changes lead to the decrease of binding energy between phenol and Lac. The migration behavior of water molecules within hydration shell is also inevitably affected. Therefore, the amphipathic TX100 or RL may influence the phenol degradation ability of Lac by modulating their interactions and water environment. This study offers molecular level of understanding on the function of surfactants in biosystem.