Multifunctional ZnO nanoparticles bio-fabricated from Canna indica L. flowers for seed germination, adsorption, and photocatalytic degradation of organic dyes

Thermodynamic and kinetic insights into azo dyes photocatalytic degradation on biogenically synthesized ZnO nanoparticles and their antibacterial potential

The extensive use of azo dyes in textile and pharmaceutical industries pose significant environmental and health risks. This problem requires to be tackled forthwith through a cheap, environmentally friendly and viable approach to mitigate water pollution. In this context, the green synthesis method was used for synthesis of ZnO NPs. These biogenic ZnO NPs were characterized by UV-Vis and Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), high-resolution transmission electron microscopy (HR-TEM) coupled with energy-dispersive X-ray (EDX), dynamic light scattering (DLS) and Zeta potential (ZP) analysis. The characteristic bandgap energy (3.02 eV), crystallite size (18.6 nm), particle size (84 nm), hydrodynamic diameter (101 nm) and ZP (-31.5 mV) all indicated the successful synthesis of the stabilized NPs, which have an absorption edge at 373 nm. Based on the responsive energy band gap to visible light, these NPs demonstrated promising photocatalytic activity for the degradation of toxic dyes with efficiencies of 82.2 and 87.5 % for of methylene blue (MB) and methyl orange (MO), respectively, in only 2 h of sunlight exposure. To evaluate the reaction kinetics and thermodynamic parameters including the activation energy and rate constant, the degradation process was conducted at various temperatures. The effect of temperature showed the highest rate constant values of 0.022 and 0.025 min-1 at 90 °C, and activation energies of 4.1 and 3.8 kJ mol-1 for MO and MB, respectively. A possible degradation mechanism was proposed based on results of the radical scavenging experiments. The photocatalyst showed recyclability for five consecutive cycles with a simple regeneration. CMFE@ZnO NPs have also exhibited great antibacterial potential by inhibiting the growth of Gram-positive (S. aureus (13 mm) and B. subtilis (14 mm)) and Gram-negative (E. coli (17 mm) and P. multosida (15 mm)) bacterial strains. As a result, these CMFE@NPs may have great commercial importance in reducing the concentration of azo dyes and drug-resistant bacteria in textile and pharmaceutical industry effluents.

Performance of Ag-doped CuO nanoparticles for photocatalytic activity applications: Synthesis, characterization, and antimicrobial activity

The auto-combustion method synthesized CuO NPs and Ag/CuO NPs. The Ag/CuO NPs were analyzed using Fourier-transform infrared, X-ray diffraction, scanning electron microscope, and Energy-dispersive X-ray spectroscopy instrumental analyses. The energy band gap, as determined by DRS properties, decreases from 3.82 to 3.50 eV for pure CuO and 10% Ag/CuO NPs, respectively. The photodegradation efficiency of Rhodamine-B & Carmine by 10% Ag/CuO NPs was nearly 98.9 and 97.8%, respectively. Antimicrobial trials revealed that the antimicrobial efficacy of Ag/CuO NPs at several dosages (20, 40, 60, 80, 100, and 120 µg/mL) against human pathogens was initially assessed using the agar well-diffusion method, and then the broth dilution method. Noticeably, the minimum inhibitory concentration of Ag/CuO NPs for all pathogens ranged from 100 to 120 µg/ml, was determined. Generally, the observed minimum microbicide concentration has a wide range of Ag/CuO NPs doses, ranging from 150 to 300 µg/ml, which helps kill (99.99%) all tested pathogenic cells. The largest relative inhibitory activities (%) were recorded against Escherichia coli (81.45 ± 1.39) at 120 g/mL of Ag/CuO NPs and 100 μg/mL (80.43 ± 0.59), followed by 80 µg/mL (72.33 ± 0.82). Additionally, the lowest relative inhibitory activities (%) were monitored versus fungal cells and Gram-positive bacteria at 120 µg/mL of Ag/CuO NPs as 52.17 ± 1.49 and 53.42 ± 1.71; respectively.

Recent advances in the biosynthesis of ZnO nanoparticles using floral waste extract for water treatment, agriculture and biomedical engineering

Flowers are often discarded after cultural and religious events, making it worthwhile to explore the utilization of this floral waste for material production. Floral extracts contain a diverse array of phytochemicals such as polyphenols, flavonoids, and reducing sugars, which play a significant role in the formation and influencing the properties of zinc oxide (ZnO) nanoparticles. In this review, we delve into the importance of floral extract, methodology, mechanism, and influencing factors in the production of ZnO nanoparticles. Additionally, the role of green ZnO nanoparticles as an adsorbent and photocatalyst for water treatment is discussed. These floral extract-mediated ZnO nanoparticles exhibit advantages in agricultural and biomedical applications, including promoting seed germination and demonstrating antibacterial, anticancer, and antifungal properties. Cost analysis reveals that while various expenses are associated with ZnO production, scaling up processes can help reduce these costs. This review underscores the potential of floral waste extract for the synthesis of green ZnO nanoparticles, thereby contributing to waste-to-wealth strategies and adhering to green chemistry principles.

Phytosynthesis of zinc oxide nanoparticles for enhanced antioxidant, antibacterial, and photocatalytic properties: A greener approach to environmental sustainability

Multifunctional nanoparticles (NPs) production from phytochemicals is a sustainable process and an eco-friendly method, and this technique has a variety of uses. To accomplish this, we developed zinc oxide nanoparticles (ZnONPs) using the medicinal plant Tinospora cordifolia (TC). Instruments such as UV-Vis, XRD, FTIR, FE-SEM with EDX, and high-resolution TEM were applied to characterize the biosynthesized TC-ZnONPs. According to the UV-vis spectra, the synthesized TC-ZnONPs absorb at a wavelength centered at 374 nm, which corresponds to a 3.2 eV band gap. HRTEM was used to observe the morphology of the particle surface and the actual size of the nanostructures. TC-ZnONPs mostly exhibit the shapes of rectangles and triangles with a median size of 21 nm. The XRD data of the synthesized ZnONPs exhibited a number of peaks in the 2θ range, implying their crystalline nature. TC-ZnONPs proved remarkable free radical scavenging capacity on DPPH (2,2-Diphenyl-1-picrylhydrazyl), ABTS (2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid), and NO (Nitric Oxide). TC-ZnONPs exhibited dynamic anti-bacterial activity through the formation of inhibition zones against Pseudomonas aeruginosa (18 ± 1.5 mm), Escherichia coli (18 ± 1.0 mm), Bacillus cereus (19 ± 0.5 mm), and Staphylococcus aureus (13 ± 1.1 mm). Additionally, when exposed to sunlight, TC-ZnONPs show excellent photocatalytic ability towards the degradation of methylene blue (MB) dye. These findings suggest that TC-ZnONPs are potential antioxidant, antibacterial, and photocatalytic agents.

Solar-powered detection of organic dyes using nitrogen-doped N-TiO2/Ag2O nanorod arrays

Organic pollutant detection has caused widespread concern regarding due to their potential environmental and human health risks. In this work, a nitrogen-doped titanium dioxide/silver oxide (N-TiO2/Ag2O) composite has been designed as a sensitive photoelectrochemical (PEC) monitoring platform of organic dyes. Sensitive determination relies on the outstanding PEC performance of N-TiO2/Ag2O. The improved PEC performance stems from the effective separation of photocarriers and the extended light response range provided by the narrowing bandgap and a p-n junction with N-TiO2/Ag2O. The N-TiO2/Ag2O electrode exhibits a photocurrent density of up to 2.2 mA/cm2, demonstrating three times increase compared with the photocurrent density observed with the pure TiO2 film. The linear detection range for rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) is 0.2 ng/mL to 10 μg/mL with an ultrasensitive detection limit of 0.2 ng/mL without bias voltage. Due to the outstanding photocurrent density and sensitive response to organic pollutants, the N-TiO2/Ag2O PEC sensor provided a promising analytical method to detect environmental organic dyes.

Alkaline protease based hydrothermal synthesis of novel Pd/CuO/ZnO nanocomposite: A new entry into photocatalytic and biomedical applications

Here, we reported the process for the production of Pd/CuO/ZnO nanocomposite utilizing alkaline protease from Phalaris minor seed extract, which is a unique, effective biogenic approach. Alkaline protease performed a crucial part in the reduction, capping and stabilization of Pd/CuO/ZnO nanocomposites. A series of physicochemical techniques were used to inquire the formation, size, shape and crystalline nature of Pd/CuO/ZnO nanocomposites. The notable performance of the synthesized nanocomposite as a photocatalyst and an antibacterial disinfectant was astonishing. The Pd/CuO/ZnO nanocrystals showed considerable photocatalytic activity by eliminating 99 % of the methylene blue (MB) in <30 min of exposure. After three test cycles, the nanocatalyst demonstrated exceptional reliability as a photocatalyst. The nanocomposite was also discovered to be an effective antibacterial agent, with zones of inhibitory activity for Staphylococcus aureus and Escherichia coli bacteria of 30(±0.2), 27(±0.3), 22(±0.2), and 21(±0.3) mm, respectively, in both light and dark conditions. Moreover, the Pd/CuO/ZnO nanocomposites showed strong antioxidant activity by efficiently scavenging 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals. The photocatalytic, antibacterial and antioxidative performance of Pd, CuO, ZnO, and CuO/ZnO were also assessed for the sake of comparison. This work shows that biogenic nanocomposites may be employed as a feasible alternative photocatalyst for the decomposition of dyes in waste water as well as a sustainable antibacterial agent.

Tecoma stans floral extract-mediated synthesis of MgFe2O4/ZnO nanoparticles for adsorption and photocatalytic degradation of coomassie brilliant blue dye

Toxic organic dyes-containing wastewater treatment by adsorption and photocatalytic techniques is widely applied, but adsorbents and photocatalysts are often synthesized through chemical methods, leading to secondary pollution by released chemicals. Here, we report a benign method using Tecoma stans floral extract to produce MgFe2O4/ZnO (MGFOZ) nanoparticles for adsorption and photocatalytic degradation of coomassie brilliant blue (CBB) dye. Green MGFOZ owned a surface area of 9.65 m2/g and an average grain size of 54 nm. This bio-based nanomaterial showed higher removal percentage and better recyclability (up to five cycles) than green MgFe2O4 and ZnO nanoparticles. CBB adsorption by MGFOZ was examined by kinetic and isotherm models with better fittings of Bangham and Langmuir or Temkin. RSM-based optimization was conducted to reach an actual adsorption capacity of 147.68 mg/g. Moreover, MGFOZ/visible light system showed a degradation efficiency of 89% CBB dye after 120 min. CBB adsorption can be controlled by both physisorption and chemisorption while •O2- and •OH radicals are responsible for photo-degradation of CBB dye. This study suggested that MGFOZ can be a promising adsorbent and catalyst for removal of organic dyes in water.

Recent advancements in sustainable synthesis of zinc oxide nanoparticles using various plant extracts for environmental remediation

The sustainable synthesis of zinc oxide nanoparticles (ZnO-NPs) using plant extracts has gained significant attention in recent years due to its eco-friendly nature and potential applications in numerous fields. This synthetic approach reduces the reliance on non-renewable resources and eliminates the need for hazardous chemicals, minimizing environmental pollution and human health risks. These ZnO-NPs can be used in environmental remediation applications, such as wastewater treatment or soil remediation, effectively removing pollutants and improving overall ecosystem health. These NPs possess a high surface area and band gap of 3.2 eV, can produce both OH° (hydroxide) and O2-° (superoxide) radicals for the generation of holes (h+) and electrons (e-), resulting in oxidation and reduction of the pollutants in their valence band (VB) and conduction band (CB) resulting in degradation of dyes (95-100% degradation of MB, MO, and RhB dyes), reduction and removal of heavy metal ions (Cu2+, Pb2+, Cr6+, etc.), degradation of pharmaceutical compounds (paracetamol, urea, fluoroquinolone (ciprofloxacin)) using photocatalysis. Here, we review an overview of various plant extracts used for the green synthesis of ZnO NPs and their potential applications in environmental remediation including photocatalysis, adsorption, and heavy metal remediation. This review summarizes the most recent studies and further research perspectives to explore their applications in various fields.

Toxicological assessment of divalent ion-modified ZnO nanomaterials through artificial intelligence and in vivo study

The nanotechnology-driven industrial revolution widely relies on metal oxide-based nanomaterial (NM). Zinc oxide (ZnO) production has rapidly increased globally due to its outstanding physical and chemical properties and versatile applications in industries including cement, rubber, paints, cosmetics, and more. Nevertheless, releasing Zn2+ ions into the environment can profoundly impact living systems and affect water-based ecosystems, including biological ones. In aquatic environments, Zn2+ ions can change water properties, directly influencing underwater ecosystems, especially fish populations. These ions can accumulate in fish tissues when fish are exposed to contaminated water and pose health risks to humans who consume them, leading to symptoms such as nausea, vomiting, and even organ damage. To address this issue, safety of ZnO NMs should be enhanced without altering their nanoscale properties, thus preventing toxic-related problems. In this study, an eco-friendly precipitation method was employed to prepare ZnO NMs. These NMs were found to reduce ZnO toxicity levels by incorporating elements such as Mg, Ca, Sr, and Ba. Structural, morphological, and optical properties of synthesized NMs were thoroughly investigated. In vitro tests demonstrated potential antioxidative properties of NMs with significant effects on free radical scavenging activities. In vivo, toxicity tests were conducted using Oreochromis mossambicus fish and male Swiss Albino mice to compare toxicities of different ZnO NMs. Fish and mice exposed to these NMs exhibited biochemical changes and histological abnormalities. Notably, ZnCaO NMs demonstrated lower toxicity to fish and mice than other ZnO NMs. This was attributed to its Ca2+ ions, which could enhance body growth metabolism compared to other metals, thus improving material safety. Furthermore, whether nanomaterials' surface roughness might contribute to their increased toxicity in biological systems was investigated utilizing computer vision (CV)-based AI tools to obtain SEM images of NMs, providing valuable image-based surface morphology data that could be correlated with relevant toxicology studies.

Synthesis of 2-amino-terephthalic acid crosslinked chitosan/bentonite hydrogel; an efficient adsorbent for anionic dyes and laccase

This research article presents the fabrication of NH2-terephthalic acid crosslinked chitosan-bentonite composite, which adopted a facile synthesis approach and offered efficient adsorption capacity for organic dyes. A novel hydrogel material named CB 5:1 demonstrated remarkable adsorption for anionic dyes (Congo red (CR) and brilliant blue (BB)) while showing a negligible affinity for cationic dyes. Adsorption isotherm studies revealed the adsorption capacity of 4950 mg/g and 2053 mg/g (per g of composite's dry weight) for CR and BB following the Langmuir adsorption model. Kinetics and thermodynamic studies were also conducted while the adsorption of anionic dyes in the presence of metal ions, cationic dyes, anionic dyes, and in simulated water remained unaffected. Laccase, an industrially important enzyme, was also immobilized on CB 5:1 to achieve enzyme stability and reusability, resulting in a staggering immobilization capacity (4782 mg/g) at pH 6.0. Laccase immobilized product was employed to perform dye degradation (> 90 % for CR and > 75 % for BB), and the reusability was tested. Overall, our crosslinked product proved appealing for removing high concentrations of anionic organic dyes from polluted water and could be envisaged for practical use.

Green synthesis of ZnO nanoparticles from ball moss (Tillandsia recurvata) extracts: characterization and evaluation of their photocatalytic activity

Green synthesis (GS), referred to the synthesis using bioactive agents such as plant materials, microorganisms, and various biowastes, prioritizing environmental sustainability, has become increasingly relevant in international scientific practice. The availability of plant resources expands the scope of new exploration opportunities, including the evaluation of new sources of organic extracts, for instance, to the best of our knowledge, no scientific articles have reported the synthesis of zinc oxide nanoparticles (ZnO NPs) from organic extracts of T. recurvata, a parasitic plant very common in semiarid regions of Mexico.This paper presents a greener and more efficient method for synthesizing ZnO NPs using T. recurvata extract as a reducing agent. The nanoparticles were examined by different techniques such as UV-vis spectroscopy, X-ray diffraction, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and BET surface analysis. The photocatalytic and adsorptive effect of ZnO NPs was investigated against methylene blue (MB) dye in aqueous media under sunlight irradiation considering an equilibrium time under dark conditions. ZnO nanoparticles were highly effective in removing MB under sunlight irradiation conditions, showing low toxicity towards human epithelial cells, making them promising candidates for a variety of applications. This attribute fosters the use of green synthesis techniques for addressing environmental issues.This study also includes the estimation of the supported electric field distributions of ZnO NPs in their individual spherical or rounded shapes and their randomly oriented organization, considering different diameters, by simulating their behavior in the visible wavelength range, observing resonant enhancements due to the strong light-matter interaction around the ZnO NPs boundaries.

Enhancing wheat crop production with eco-friendly chitosan encapsulated nickel oxide nanocomposites: A safe and sustainable solution for higher yield

In this work, we looked at using nickel oxide (NiO) nanocomposites with chitosan encapsulation as a nano-primer to improve wheat crop output. A straightforward green precipitation procedure was used to create the nanocomposites, and they were then characterized using several methods. According to the findings, the chitosan-encapsulated NiO nanocomposites possessed a large surface area and were resilient to changes in pH. Following this, wheat seeds were primed with the nanocomposites, and under greenhouse circumstances, the impact on crop growth was assessed. The findings demonstrated that, in comparison to the control group, nanocomposites priming considerably enhanced wheat growth and germination rate up to 99 %. In comparison to untreated plants, the wheat plants treated with the nanocomposites primer had greater plant height i.e. shoot length (11.4 cm) and root length (10.3 cm), leaf area, and biomass accumulation. Further research into the mechanism underlying the priming effect of nanocomposites on wheat growth revealed that the nanocomposites enhanced nutrient absorption, photosynthesis, and stress tolerance in wheat plants. In conclusion, our research shows that chitosan-encapsulated NiO nanocomposites have the potential to improve wheat crop productivity in an environmentally benign and long-term manner, offering a viable strategy for sustainable farming.

Three-dimensional rose-like zinc oxide fiber coating for simultaneous extraction of polychlorinated biphenyls and polycyclic aromatic hydrocarbons by headspace solid phase microextraction

The three-dimensional (3D) rose-like zinc oxide (ZnO) material was prepared by a simple one-step CTAB-assisted hydrothermal strategy and used as a headspace solid-phase microextraction (HS-SPME) coating. Polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) were analyzed by gas chromatography with flame ionization detector (GC-FID), and conclusively applied to ultrasensitive detection in lake and river water. Compared with one-dimensional (1D) pencil-like ZnO, the layer-by-layer petal-like structure could fully expose mass adsorption sites on the surface, which could significantly improve the adsorption. The enrichment factors with 7535-8595 for PCBs and 3855-7320 for PAHs were achieved. The established method provided a satisfactory linear range (0.005-30 ng·mL-1), coefficient (R2 > 0.9978), ultra-low limit detection (1-3 pg·mL-1), and long service life (≥ 150 times). The recoveries of 83.42-120.86 % were obtained in the real detection application of lake and river water. This work demonstrated that 3D rose-like ZnO with low cost, simple synthesis, fast extraction ability and high enrichment performance was an ideal coating material, which was hoped to enrich other compounds with similar structures with PCBs and PAHs.

Use of metal nanoparticles in agriculture. A review on the effects on plant germination

Agricultural nanotechnology has become a powerful tool to help crops and improve agricultural production in the context of a growing world population. However, its application can have some problems with the development of harvests, especially during germination. This review evaluates nanoparticles with essential (Cu, Fe, Ni and Zn) and non-essential (Ag and Ti) elements on plant germination. In general, the effect of nanoparticles depends on several factors (dose, treatment time, application method, type of nanoparticle and plant). In addition, pH and ionic strength are relevant when applying nanoparticles to the soil. In the case of essential element nanoparticles, Fe nanoparticles show better results in improving nutrient uptake, improving germination, and the possibility of magnetic properties could favor their use in the removal of pollutants. In the case of Cu and Zn nanoparticles, they can be beneficial at low concentrations, while their excess presents toxicity and negatively affects germination. About nanoparticles of non-essential elements, both Ti and Ag nanoparticles can be helpful for nutrient uptake. However, their potential effects depend highly on the crop type, particle size and concentration. Overall, nanotechnology in agriculture is still in its early stages of development, and more research is needed to understand potential environmental and public health impacts.

Immobilized mesoporous materials for carvacrol delivery to the germination and early growth of tomato plants (Solanum Lycopersicum)

The immobilization of TiO₂-SiO₂ (TSO) materials on seed mats stands as a practical way to help the germination and early growth of tomato plants (Solanum Lycopersicum). Mesoporous materials are functionalized with triethanolamine (TEA) and loaded with the biocide molecule of carvacrol (CAR). The effect of CAR on the parameters of germination percentage, germination time, root, shoot length, and chlorophyll content of seeds and/or tomato seedlings are investigated. The germination experiments were carried out using seed mats coated with the TSO materials, also TSO powdered materials were put directly on the tomato seeds to study their effect on germination. Direct deposition of TSO composites achieved the complete germination and longer shoots due to the cooperative interactions among nanomaterials, carvacrol, and the tomato seed. However, the handling of the seeds and the detrimental effect of powder in the germination system made difficult the application with agricultural purposes. The plastic seed mats provide a practical system with lower germination, but more homogenous growth of root/shoot is possible. Surprisingly, in this methodology the carvacrol presents a detrimental effect on germination due to less interaction with the seeds. The handling of seeds and recover of the nanomaterials and its reuse are advantages of the plastic seed mats, which together with less wastage of seeds suggest a potential use in agriculture. The as-synthetized TSO NPs, together with the functionalization of triethanolamine and carvacrol used to promote the health germination of the seeds, allows the control of the time for seed germination, germination %, and length for the root/shoot of seed tomato germination. The immobilization of mesoporous materials results in an alternative to help the germination and early growth of agricultural plants searching to avoid the lixiviation of nanomaterials to the environment.

Sustainable fabrication of hybrid silver-copper nanocomposites (Ag-CuO NCs) using Ocimum americanum L. as an effective regime against antibacterial, anticancer, photocatalytic dye degradation and microalgae toxicity

In this study, a sustainable fabrication of hybrid silver-copper oxide nanocomposites (Ag-CuO NCs) was accomplished utilizing Ocimum americanum L. by one pot green chemistry method. The multifarious biological and environmental applications of the green fabricated Ag-CuO NCs were evaluated through their antibacterial, anticancer, dye degradation, and microalgae growth inhibition activities. The morphological features of the surface functionalized hybrid Ag-CuO NCs were confirmed by FE-SEM and HR-TEM techniques. The surface plasmon resonance λ_max peak appeared at 441.56 nm. The average hydrodynamic size distribution of synthesized nanocomposite was 69.80 nm. Zeta potential analysis of Ag-CuO NCs confirmed its remarkable stability at -21.5 mV. XRD and XPS techniques validated the crystalline structure and electron binding affinity of NCs, respectively. The Ag-CuO NCs demonstrated excellent inhibitory activity against Vibrio cholerae (19.93 ± 0.29 mm) at 100 μg/mL. Anticancer efficacy of Ag-CuO NCs was investigated against the A549 lung cancer cell line, and Ag-CuO NCs exhibited outstanding antiproliferative activity with a low IC₅₀ of 2.8 ± 0.05 μg/mL. Furthermore, staining and comet assays substantiated that the Ag-CuO NCs hindered the progression of the A549 cells and induced apoptosis as a result of cell cycle arrest at the G₀/G₁ phase. Concerning the environmental applications, the Ag-CuO NCs displayed efficient photocatalytic activity against eosin yellow degradation up to 80.94% under sunlight irradiation. Microalgae can be used as an early bio-indicator/prediction of environmental contaminants and toxic substances. The treatment of the Ag-CuO NCs on the growth of marine microalgae Tetraselmis suecica demonstrated the dose and time-dependent growth reduction and variations in the chlorophyll content. Therefore, the efficient multifunctional properties of hybrid Ag-CuO NCs could be exploited as a regime against infective diseases and cancer. Further, the findings of our investigation witness the remarkable scope and potency of Ag-CuO NCs for environmental applications.

Efficient photodegradation of methyl red dye by kaolin clay supported zinc oxide nanoparticles with their antibacterial and antioxidant activities

Kaolin clay-supported Zinc oxide (ZnO/KC) and ZnO NPs nanoparticles (NPs) were prepared by a chemical reduction process and used for the photodegradation of methyl red (MR) dye as a photocatalyst. Due to the interlayered porous structure of the KC, we achieved an extremely good association between ZnO NPs and KC. The product confirmation was conducted by Scanning electron microscopy (SEM), X-Ray diffraction (XRD), energy dispersive X-Ray (EDX), and Fourier transforms infrared (FTIR). SEM showed the irregular morphology of ZnO NPs, while ZnO/KC NCs were predominately round-shaped. Moreover, in both cases, NPs were present in both dispersed as well as agglomerated forms with an average particle size below 100 nm. The results acquired from photodegradation analyses show that ZnO NPs and ZnO/KC NCs degraded about 90 and 99% of MR dye respectively, under UV light in a short irradiation time of 10 min. The recovered and re-recovered ZnO NPs and ZnO/KC NCs also considerably photodegraded MR dye in an aqueous medium. The same NPs also exhibit promising bioactivities against two pathogenic bacteria, i.e., Citrobacter and Providencia. The antioxidant activity of ZnO/KC NCs reached to reasonable 70% compared to the 88% activity of the standard ascorbic acid.

Design and development of novel magnetic Lentinan/PVA nanocomposite for removal of diazinon, malathion, and diclofenac contaminants

Increasing population growth and rapid expansion of the industrialization of the world society have caused severe environmental pollution to the planet. This study was carried out in order to investigate the synthesis of biopolymeric texture nano adsorbent based on the Lentinan (LENT), Poly Vinyl Alcohol (PVA) and Iron Oxide nanoparticles for the removal of environmental pollutants. The spherical structural morphology of Fe₃O₄@LENT/PVA nanocomposite has been determined by FE-SEM analyses. According to the obtained results from FTIR analyses, all absorption bands of the Fe₃O₄, LENT, and PVA, had been existed in nanocomposite and approved the successful formation of it. From EDS analysis, it has been revealed that 57.21 wt% Fe, 17.56 wt% C and 25.23 wt% O. Also, the XRD pattern of the nanocomposite, approved the presence of polymeric and magnetic parts with card no. JCPDS, 01-075-0033. The BET analysis has defined specific surface area (47 m²/g) and total pore volume (0.15 cm³/g). Moreover, high heterogeneity and structural stability of the fabricated Fe₃O₄@LENT/PVA nanocomposite have been proven by TGA. Besides, VSM analysis measured great magnetic property of the nanocomposite (48 emu/g). Also, the Fe₃O₄@LENT/PVA nanocomposite potential for effective removal of malathion (MA), Diazinon (DA), and Diclofenac (DF) from watery solution has studied by an experiment based on the efficacy of adsorbent dosage, pH, and temperature. The adsorption kinetics of three pollutants had investigated using pseudo-first-order (PFO), pseudo-second-order (PSO) and intra-particle diffusion (IPD) velocity equations, the results showed that the kinetics followed PSO velocity equations. Also, the Langmuir, Freundlich, Dubbin-Radushkevich (D-R) and Temkin isotherm models had investigated, and the adsorption isotherm was adopted from the Langmuir model. The results demonstrated that in the presence of Fe₃O₄@LENT/PVA nanocomposite, at the optimal conditions (contact time = 180 min, pH = 5, nanocomposite dosage = 0.20 g/L and temperature of 298 K) the maximum adsorption capacity of MA, DF, and DA were 101.57, 153.28, and 102.75 mg/g, respectively. The antibacterial features of the Fe₃O₄@LENT/PVA nanocomposite, had evaluated by Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria, but the result did not show any antibacterial activity.

Sustainable and energy-efficient photocatalytic degradation of textile dye assisted by ecofriendly synthesized silver nanoparticles

In this study, we have touched on two goals of sustainable development, namely, the provision of clean water and sanitation and clean energy at acceptable prices, hoping for good health for all ages. A green economical method was used to prepare silver nanoparticles from chitosan biopolymer. AgNPs were fully characterized using UV-Vis, FTIR, XRD, HR-TEM, and EDX analysis. Different concentrations (0.02-0.18 g/L) of the nanoparticles were integrated into a mixture of heterogeneous nano photocatalysts TiO₂ and ZnO (1:1 weight ratio) under UV irradiation for the photocatalytic degradation of Acid Red 37 textile dye to obtain clean water. The kinetic description of the performed photocatalytic process was presented assuming a pseudo-first-order reaction. The data revealed that increasing the concentration of AgNPs in the catalytic mixture showed a high apparent rate constant (k_app) accompanied by an increase in the apparent quantum yield (%Q_app), followed by dye destruction after a very short time (t_0.5 = 3 min). Since the photocatalytic degradation process consumes electrical energy, the electrical energy per order (EE/O) was calculated, showing a low value of 20 kWh/m³/order, using 0.18 g/L AgNPs, indicating that the elicited photocatalytic degradation method is a sustainable one for the mineralization of the targeted dye.

Adsorptive removal of hazardous dye (crystal violet) using bay leaves (Laurus nobilis L.): surface characterization, batch adsorption studies, and statistical analysis

In this study, the surface properties of Laurus nobilis L. were determined by inverse gas chromatography. From this, the surface of Laurus nobilis L. was found to be an acidic ([Formula: see text]). Then, the adsorption of hazardous crystal violet dye on Laurus nobilis L. was examined. For the adsorption process, the optimum conditions were determined as contact time (60 min), adsorbent dosage (1.0 g/L), agitation rate (200 rpm), and initial pH (≅ 7). The efficiencies of initial concentration, contact time, temperature, and their binary combinations on the improvement of adsorption percentage were statistically investigated via three different two-way ANOVA analyses. Adsorption data were applied to different isotherms, and it was determined that the Langmuir isotherm (r² = 0.9998) was the most suitable isotherm for the adsorption process. The [Formula: see text] value was calculated as 400.0 mg/g at 25 °C from the Langmuir isotherm. According to kinetic models, it was observed that the adsorption occurred in three steps. According to enthalpy (+ 7.52 kJ/mol), activation energy (+ 8.91 kJ/mol), and Gibbs free energy (- 30.0 kJ/mol) values, it was determined that the adsorption occurred endothermically and spontaneously. As a result of reusability studies, it was determined that the adsorbent could be used repeatedly.

A critical review on the bio-mediated green synthesis and multiple applications of magnesium oxide nanoparticles

Nowadays, advancements in nanotechnology have efficiently solved many global problems, such as environmental pollution, climate change, and infectious diseases. Nano-scaled materials have played a central role in this evolution. Chemical synthesis of nanomaterials, however, required hazardous chemicals, unsafe, eco-unfriendly, and cost-ineffective, calling for green synthesis methods. Here, we review the green synthesis of MgO nanoparticles and their applications in biochemical, environmental remediation, catalysis, and energy production. Green MgO nanoparticles can be safely produced using biomolecules extracted from plants, fungus, bacteria, algae, and lichens. They exhibited fascinating and unique properties in morphology, surface area, particle size, and stabilization. Green MgO nanoparticles served as excellent antimicrobial agents, adsorbents, colorimetric sensors, and had enormous potential in biomedical therapies against cancers, oxidants, diseases, and the sensing detection of dopamine. In addition, green MgO nanoparticles are of great interests in plant pathogens, phytoremediation, plant cell and organ culture, and seed germination in the agricultural sector. This review also highlighted recent advances in using green MgO nanoparticles as nanocatalysts, nano-fertilizers, and nano-pesticides. Thanks to many emerging applications, green MgO nanoparticles can become a promising platform for future studies.

Facile synthesis of CoFe2O4@MIL-53(Al) nanocomposite for fast dye removal: Adsorption models, optimization and recyclability

The global occurrence of textile dyes pollution has recently emerged, posing a serious threat to ecological systems. To abate dye contamination, we here developed a novel magnetic porous CoFe₂O₄@MIL-53(Al) nanocomposite by incorporating magnetic CoFe₂O₄ nanoparticles with MIL-53(Al) metal-organic framework. This nanocomposite possessed a surface area of 197.144 m² g^-1 and a pore volume of 0.413 cm³ g^-1. The effect of contact time (5-120 min), concentration (5-50 mg L^-1), dosage (0.1-1.0 g L^-1), and pH (2-10) on Congo red adsorption was clarified. CoFe₂O₄@MIL-53(Al) could remove 95.85% of Cong red dye from water with an accelerated kinetic rate of 0.6544 min^-1 within 10 min. The kinetic and isotherm models showed the predominance of Bangham and Temkin. According to Langmuir, the maximum uptake capacities of CoFe₂O₄@MIL-53(Al), CoFe₂O₄, and MIL-53(Al) adsorbents were 43.768, 17.982, and 15.295 mg g^-1, respectively. CoFe₂O₄@MIL-53(Al) was selected to optimize Cong red treatment using Box-Behnken experimental design. The outcomes showed that CoFe₂O₄@MIL-53(Al) achieved the highest experimental uptake capacity of 35.919 mg g^-1 at concentration (29.966 mg L^-1), time (14.926 min), and dosage (0.486 g L^-1). CoFe₂O₄@MIL-53(Al) could treat dye mixture (methylene blue, methyl orange, Congo red, malachite green, and crystal violet) with an outstanding removal efficiency of 81.24% for 30 min, and could be reused up to five cycles. Therefore, novel recyclable and stable CoFe₂O₄@MIL-53(Al) is recommended to integrate well with real dye treatments systems.

Toward enhanced visible-light photocatalytic dye degradation and reusability of La3+ substituted ZnFe2O4 nanostructures

The present work focused on the synthesis of novel ZnLa_xFe_2-xO₄ catalysts (x = 0, 0.01, 0.03, 0.05) and their utilization for the photocatalytic degradation of Rhodamine B dye. Structurally, the band gap energy of the catalysts tended to decrease (1.94-1.70 eV) with increasing the amount of La³⁺ dopant. ZnLa_0.05Fe_1.95O₄ had an average particle size (40 nm), high surface area (41.07 m² g^-1) and large pore volume (0.186 cm³ g^-1). Moreover, the effect of doping ratio, reaction time, H₂O₂ concentration, catalyst loading on the treatment performance of La³⁺ substituted ZnFe₂O₄ nanocomposites was investigated. ZnLa_0.05Fe_1.95O₄/H₂O₂ system exhibited the highest degradation efficiency of 99.5% and nonlinear pseudo first-order kinetic reaction rate (14.8 × 10^-3 min^-1) in the presence of visible light irradiation. The key role of reactive oxygen species involving ^•O₂^- and ^•OH radicals was well explained through the scavenger study. A plausible mechanism of the degradation of Rhodamine B dye was also proposed. Due to two advantageous points including high recyclability (up to 4 cycles) and stability, La³⁺ substituted ZnFe₂O₄ nanocomposites can be an effective and competitive catalyst for the visible light-driven photodegradation of toxic dyes in the real wastewaters.

Green synthesis of Mn3O4 nanoparticles using Costus woodsonii flowers extract for effective removal of malachite green dye

The pollution of organic dyes such as malachite green is one of the globally critical issues, calling for efficient mitigation methods. Herein, we developed green Mn₃O₄ nanoparticles synthesized using natural compounds extracted from Costus woodsonii flowers under an ultrasound-assisted mode. The materials were characterized using several physicochemical techniques such as Fourier-transform infrared spectroscopy, X-ray diffraction, Energy-dispersive X-ray spectroscopy, scanning electron microscopy, Raman spectroscopy, and N₂ adsorption desorption isotherm measurement. The X-ray diffraction and N₂ isotherm plots confirmed the presence of tetragonal γ-Mn₃O₄ phase and mesoporous structure, respectively. Carbonyl groups derived from flavonoids or carboxylic compounds were found in the surface of green Mn₃O₄ nanoparticles. The effect of pH, contact time, dose, and concentration on the adsorption of malachite green over green Mn₃O₄ was carried out. The maximum malachite green adsorption capacity for green Mn₃O₄ nanoparticles was 101-162 mg g^-1. Moreover, kinetic and isotherm adsorption of malachite green obeyed Langmuir (R_adj.² = 0.980-0.995) and pseudo first-order models (R_adj.² = 0.996-1.00), respectively. Adsorption of malachite green over green Mn₃O₄ was a thermodynamically spontaneous process due to negative Gibbs free energy values (ΔG^ο < 0). Green Mn₃O₄ nanoparticles offered a high stability through the FR-IR spectra analysis. With a good recyclability of 4 cycles, green Mn₃O₄ nanoparticles can be used as potential adsorbent for removing malachite green dye from water.

Exposure to low levels of photocatalytic TiO2 nanoparticles enhances seed germination and seedling growth of amaranth and cruciferous vegetables

Titanium dioxide (TiO₂) is one of the most common compounds on Earth, and it is used in natural forms or engineered bulks or nanoparticles (NPs) with increasing rates. However, the effect of TiO₂ NPs on plants remains controversial. Previous studies demonstrated that TiO₂ NPs are toxic to plants, because the photocatalytic property of TiO₂ produces biohazardous reactive oxygen species. In contrast, another line of evidence suggested that TiO₂ NPs are beneficial to plant growth. To verify this argument, in this study, we used seed germination of amaranth and cruciferous vegetables as a model system. Intriguingly, our data suggested that the controversy was due to the dosage effect. The photocatalytic activity of TiO₂ NPs positively affected seed germination and growth through gibberellins in a plant-tolerable range (0.1 and 0.2 mg/cm²), whereas overdosing (1 mg/cm²) induced tissue damage. Given that plants are the foundations of the ecosystem; these findings are useful for agricultural application, sustainable development and maintenance of healthy environments.

Fabrication of poly(maleic acid)-grafted cross-linked chitosan/montmorillonite nanospheres for ultra-high adsorption of anionic acid yellow-17 and cationic brilliant green dyes in single and binary systems

In this contribution, poly(maleic acid)-grafted cross-linked chitosan/montmorillonite composite nanospheres (PMAL-CTS/MMT) were synthesized via a facile approach for adsorption of organic dyes. The adsorption capacity of PMAL-CTS/MMT towards anionic acid yellow-17 (AY17) and cationic brilliant green (BG) was compared to PMAL-CTS, CTS/MMT, and MMT to emphasize the role of surface functional groups introduced by poly(maleic acid) and montmorillonite. Interestingly, the adsorption efficiency of PMAL-CTS/MMT nanocomposite towards both dyes in the single and binary systems was extremely high due to plenty of functional groups. The affinity of PMAL-CTS/MMT towards cationic and anionic dyes resulted from the feasible modulation of the surface charges as a function of the solution pH. The PMAL-CTS/MMT nanocomposite exhibited a maximum adsorption capacity of 518 and 1910 mg g^-1 for AY17 and BG, respectively, which is higher than most of the adsorbents reported in recent literature studies. The proposed mechanism based on the characterization of PMAL-CTS/MMT after the adsorption highlighted that the adsorption is mainly controlled by electrostatic interaction, π - π interactions, and hydrogen bonding. More importantly, the PMAL-CTS/MMT nanocomposite was successfully applied to separate the AY17 and BG dyes from real-life aquatic environments. Collectively, the simple fabrication and superior adsorption performance reveal that PMAL-CTS/MMT has the potential to treat concomitant organic dyes effectively.

Photocatalytic activity of calcined chicken eggshells for Safranin and Reactive Red 180 decolorization

One of the most important problems affecting the environment today is the inability to adequately treat wastewater containing dyes. Among of the many treatment processes used in the treatment of dye-containing wastewater, photocatalytic based wastewater treatment processes attract the attention of scientists as a new, economically feasible, and promising approach which has been in practice for a few decades. However, in order to use these processes in wider areas, cheap and effective catalysts are still being developed today. In this study, the photocatalytic activity of eggshell-CaO produced from waste chicken eggshells was investigated for decolorization of Safranin (Basic Red 2) and Reactive Red 180 (RR180) dyes. First, sintering process was applied to the waste chicken eggshells at different temperatures (300, 600, 900 °C) in order to observe CaO formation from the eggshells. Second, the parameters such as photocatalyst amount, pH, concentration of dyes, and reaction time were optimized on dye removal efficiency in photocatalytic experiments. The optimum conditions were performed under visible light and found to be 1 g/L of catalyst amount (sintered at 900 °C), original solution pH (6.80 for Safranin and 6.60 for RR180), and 5 mg/L of dye concentration. The photocatalytic removal efficiencies of Safranin and RR180 dyes were 100% and 97.90%, respectively, under the determined optimum experimental conditions. The adsorption efficiency of the dyes that could be realized during the photocatalytic experiment was measured as 20.99% and 9.99% for Safranin and RR180 dyes, respectively.

Comparative Study of SnO2 and ZnO Semiconductor Nanoparticles (Synthesized Using Randia echinocarpa) in the Photocatalytic Degradation of Organic Dyes

Symmetry in nanomaterials is essential to know the behavior of their properties. In the present research, the photocatalytic properties of SnO2 and ZnO nanoparticles were compared for the degradation of the cationic dyes Methylene Blue (MB) and Rhodamine B (RB). The nanoparticles were obtained through a green synthesis process assisted by Randia echinocarpa extracts; they were then analyzed through Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) to characterize their structure. Transmission electron microscopy (TEM) was used to identify the morphology and disclose nanoparticle size, and the optical properties were studied through Ultraviolet–visible spectroscopy (UV–Vis). The results show that the synthesized SnO2 and ZnO nanomaterials have quasispherical morphologies with average sizes of 8–12 and 4–6 nm, cassiterite and wurtzite crystal phases, and band gap values of 3.5 and 3.8 eV, respectively. The photocatalytic activity yielded 100% degradation of the MB and RB dyes in 210 and 150 min, respectively. ZnO performed higher photocatalytic degradation of the cationic dyes than SnO2 due to a higher content of Randia echinocarpa extracts remaining after the green synthesis process.

Design, synthesis, and characterization of a novel Zn(II)-2-phenyl benzimidazole framework for the removal of organic dyes

A novel Zn (II) organic framework comprising 2-phenyl benzimidazole (ZPBIF-1) was synthesized by using a solvothermal method. The characterization of the synthesized MOF was performed utilizing XRD, SEM, FT-IR, ¹H-NMR, ¹³C-NMR, MS, XPS, TG/DTA, and N₂ sorption analysis. ZPBIF-1 was successfully utilized to remove Acid red 88, Basic Violet 14, Basic Blue 54, and Congo red dyes in aqueous solutions. In this study, some parameters, including adsorbent dosage, initial dye concentration, contact time, temperature, and pH, were examined. To evaluate the experimental data, Freundlich, Langmuir, Temkin, and Dubinin-Radushkevich isotherm models were used. In this case, Langmuir is the most suitable model. Several kinetic models, including First-order, pseudo-first-order, second-order, and Pseudo-second-order kinetic models, Elovich's, and Weber's intraparticle diffusion models, were utilized to comprehend the detailed adsorption process. According to the pseudo-second-order kinetic model, dye sorption kinetics is best described. In addition, thermodynamic parameters like enthalpy (ΔH°), Gibbs free energy (ΔG°), and entropy (ΔS°) were also achieved and analyzed. The experimental studies thus suggest that Zn (II) metal-organic framework based on 2-phenyl benzimidazole could be a promising candidate for eliminating dyes from aqueous solution. Hence, the experimental studies suggest that a Zn (II) metal-organic framework based on 2-phenylbenzimidazole could be a promising candidate for eliminating dyes from aqueous solution. The maximum adsorption capacity of ZPBIF-1 was 1666.66, 1250, 1000, and 1250 mg/g for Acid red 88, Basic violet 14, Basic blue 54, and Congo red dyes, respectively. Furthermore, this method was used to remove contaminant dyes from textile wastewater, and an acceptable result was obtained.

In-situ hydrothermal synthesis of CNT decorated by nano ZnS/CuO for simultaneous removal of acid food dyes from binary water samples

The zinc sulfide/copper oxide-carbon nanotube nanocomposite (ZnS/CuO-CNT) was fabricated by using an in-situ hydrothermal synthesis method and was used for simultaneous ultrasound-assisted adsorptive removal of a binary mixture of ponceau 4R (P4R) and tartrazine (TA) acid food dyes from contaminated water. The as-synthesized ZnS/CuO-CNT was described by FESEM, XRD, FTIR, BET, and zeta potential analysis. The results included nested network morphology, high purity with the crystalline structure, oxygen-containing functional groups, mesoporous/micropores texture with cumulate interspace, specific surface area of 106.54 m2 g-1, and zero-point charge (pHzpc) of 5.3. In adsorption experiments, the simultaneous effect of main independent variables, including solution pH, adsorbent dosage, concentration of each dye, temperature, and sonication time on the removal efficiency of dyes was studied systematically using the central composite design (CCD) method based on response surface methodology (RSM). Also, the second-order multivariate equation was presented to determine the relationship between the removal efficiencies of P4R and AT dyes and six independent effective variables. The high correlation coefficient (R2 ≥ 0.99), significant p-value (P < 0.0001), and non-significant lack-of-fit (P > 0.05) showed the high accuracy, and validity of the proposed model to predict the removal efficiency of P4R and TA acid food dyes. The experimental removal efficiency for P4R and TA dyes was found to be 98.45 ± 2.54, and 99.21 ± 2.23, respectively. Also, the Langmuir maximum adsorption capacity for P4R and TA dyes was determined to be 190.1 mg g-1 and 183.5 mg g-1, respectively. Finally, the adsorbent's reusability was tested for six periods and could be reused repeatedly without significant reduction in adsorption performance.

Recent advances on botanical biosynthesis of nanoparticles for catalytic, water treatment and agricultural applications: A review

Green synthesis of nanoparticles using plant extracts minimizes the usage of toxic chemicals or energy. Here, we concentrate on the green synthesis of nanoparticles using natural compounds from plant extracts and their applications in catalysis, water treatment and agriculture. Polyphenols, flavonoid, rutin, quercetin, myricetin, kaempferol, coumarin, and gallic acid in the plant extracts engage in the reduction and stabilization of green nanoparticles. Ten types of nanoparticles involving Ag, Au, Cu, Pt, CuO, ZnO, MgO, TiO₂, Fe₃O₄, and ZrO₂ with emphasis on their formation mechanism are illuminated. We find that green nanoparticles serve as excellent, and recyclable catalysts for reduction of nitrophenols and synthesis of organic compounds with high yields of 83-100% and at least 5 recycles. Many emerging pollutants such as synthetic dyes, antibiotics, heavy metal and oils are effectively mitigated (90-100%) using green nanoparticles. In agriculture, green nanoparticles efficiently immobilize toxic compounds in soil. They are also sufficient nanopesticides to kill harmful larvae, and nanoinsecticides against dangerous vectors of pathogens. As potential nanofertilizers and nanoagrochemicals, green nanoparticles will open a revolution in green agriculture for sustainable development.

Mechanism underlying how a chitosan-based phosphorus adsorbent alleviates cadmium-induced oxidative stress in Bidens pilosa L. and its impact on soil microbial communities: A field study

In the present study, field experiments were conducted in Side village, Yangshuo, Guilin, Guangxi Province, China, using four C-BPA application levels (control (0 mg m^-2), T1 (100 mg m^-2), T2 (200 mg m^-2) and T3 (400 mg m^-2)) to clarify the mechanism by which a chitosan-based phosphorus adsorbent (C-BPA) applied as a passivator helps Bidens pilosa L. (B. pilosa L.) alleviate cadmium (Cd)-induced oxidative stress in Cd-contaminated soil. In the aqueous phase, C-BPA successfully adsorbed Cd²⁺ on the surface primarily via ion exchange, and C-BPA has potential Cd²⁺ adsorption capacity, enabling its use as a passivator in real Cd-contaminated environments. In Cd-contaminated soils, under C-BPA application at the T3 level, the pH value increased by 11.2%, and the acid-soluble form of Cd decreased by 26.5%. Additionally, the application of C-BPA improved the rhizosphere soil environment and impacted the soil microbial community diversity and structure. Among soil microbes, the soil fungal community was more sensitive than bacteria to C-BPA application. Dehydrogenase, acetic acid, soil pH and Eurotiomycetes or Dothideomycetes significantly impacted Cd accumulation in the leaves of B. pilosa L.; Cd accumulation in leaves was decreased by 68.1% under C-BPA application at the T3 level. Additionally, the variation of increased catalase (CAT) and peroxidase (POD) jointly promoted plant growth; the plant weight was increased by 112.7% under the C-BPA application at the T3 level. Notably, the production of CAT and POD by B. pilosa L. was more effective than the synthesis of glutathione (GSH) in helping B. pilosa L. eliminate excess reactive oxygen species (ROS). Therefore, our findings demonstrated that the application of C-BPA to Cd-contaminated soil can greatly improve the rhizosphere soil environment, help B. pilosa L. eliminate ROS and promote plant growth.

Zero waste multistage utilization of Ginkgo biloba branches

Zero waste multistage utilization of biomass from Ginkgo biloba branches (GBBs) was achieved through extraction of bioactive components, analysis of antioxidant and antibacterial activities, preparation and composition of pyrolyzate, adsorption and reuse of modified biochar. The results showed that GBBs had abundant bioactive components for potential application in the industry of food, chemical raw materials and biomedicine. Especially, the bioactive compounds in acetone extract (10 mg/mL) of GBBs identified by DPPH and ABTS had free radical scavenging abilities of 92.28% and 98.18%, respectively, which are equivalent to Vitamin C used as an antioxidant in food additives. Fourier Transform Infrared and X-Ray Diffraction analysis showed that carboxymethyl cellulose (CMC) and magnetic Fe₃O₄ were successfully incorporated into raw biochar (RB) to form CMC-Fe₃O₄-RB nanomaterial. Scanning electron microscopy and X-Ray Diffraction spectroscopy displayed Fe, C, and O existed on the surface of CMC-Fe₃O₄-RB. Compared with RB, CMC-Fe₃O₄-RB had a larger specific surface area, pore volume and pore size. Meanwhile, nanomagnetic CMC-Fe₃O₄-RB solved the problem of agglomeration in traditional magnetized biochar production, and improved the adsorption capacity of Pb²⁺, which was 29.90% higher than that of RB by ICP-OES. Further, the Pb²⁺ (10 mg/L) adsorption capacity of CMC-Fe₃O₄-RB reached the highest level in 2 h at the dosage of 0.01 g/L, and remained stable at 52.987 mg/g after five cycles of adsorption and desorption. This research aided in the creation of a strategy for GBBs zero waste multistage usage and a circular economic model for GBBs industry development, which can be promoted and applied to the fields of food industry and environment improvement.

Hydrothermal carbonization of rape straw: Effect of reaction parameters on hydrochar and migration of AAEMs

Hydrothermal carbonization (HTC) can improve biomass quality in both physical and chemical aspects for energy application. This study aims to investigate the characteristics and reactivities of rape straw (RS) hydrochars. Hydrochars were prepared at 160-240 °C with residence time of 15-120 min. Mass yield, energy yield, microstructure, functional group and migration of alkali and alkaline earth metals (AAEMs) were studied to evaluate the influence of different conditions on properties of hydrochar. The results showed that O/C and H/C ratio decreased, while the higher heating value (HHV) increased with increasing temperature and residence time. The effect of increasing temperature on hydrochar properties was more significant than residence time. The structure was changed, and hydrochar possessed a more stable form after the aromatization reaction. For the gasification reactivity of hydrochar, decomposition rate curves showed that the peak of pyrolysis and gasification moved to a higher temperature region with the increasing of HTC temperature because of the developed aromatic structures in hydrochar. The pyrolysis activation energy decreased from raw RS 71.68 to 41.03 kJ/mol in 240 °C, while gasification activation energy increased from 80.42 to 251.30 kJ/mol. Moreover, it was found that HTC can reduce the content of AAEMs efficiently and the best removal condition is 200 °C. Ca content dropped to a minimum value at 200 °C and then increased at higher temperature which may be caused by well-developed pore structure in hydrochars. This study provides basic data for comprehensive utilization of rape straw and migration mechanism of AAEMs in HTC process.

Antioxidant, antibacterial, and catalytic performance of biosynthesized silver nanoparticles of Rhus javanica, Rumex hastatus, and Callistemon viminalis

Rhus javanica (Anacardiaceae) containing abundant glucopyranosidal constituents, is traditionally used to treat gastric and duodenal ulcer, dysentery, and diarrhea. Rumex hastatus (Polygonaceae) widely distributed in Pakistan, has traditional importance in treating wound healing, jaundice, rheumatism, and skin diseases. Callistemon viminalis (Myrtaceae), a rich source of essential oils, saponins, triterpenoids, phloroglucinols, and flavonoids is used in industries, perfumes, nutrition, and cosmetics. Taking the importance of the subject plants, this study is designed to synthesize silver nanoparticles via aqueous extracts of R. javanica (RJAgNPs), R. hastatus (RHAgNPs), and C. viminalis (CVAgNPs). Synthesis, surface, and sizes of silver nanoparticles (AgNPs) were confirmed using spectroscopic techniques including ultraviolet-visible (UV-Vis), Fourier transform-infrared (FT-IR), and scanning electron microscopy (SEM). AgNPs were produced in ratios 1:15, 1:16, and 1:9 and inferred via appearance of a sharp surface plasmon resonance (SPR) absorption peak (400-435 nm), which represented well-defined, stable, and spherical AgNPs. From SEM analysis, the sizes of RJAgNPs, RHAgNPs, and CVAgNPs were found to be 67 nm, 61 nm, and 55 nm, respectively. The synthesized AgNPs exhibited potential free radical scavenging, antibacterial, and catalytic properties in degradation of dyes including Congo red, methylene blue, methyl orange, rhodamine B, ortho and para-nitrophenols, and several food colours. Hence, the subject AgNPs in the current study might display promising role in drug development and remediation of environmental/industrial effluents.

The Effects of Several Metal Nanoparticles on Seed Germination and Seedling Growth: A Meta-Analysis

Using the proper means to improve seed germination is of great significance in agriculture and forestry. Here, a meta-analysis was used to examine whether metal nanoparticle treatments have a specific effect on the seed germination and seedling growth of agricultural species. Using the Web of Science (1950–2021), PubMed (1950–2021), and Scopus (1950–2021) databases, a paper search was conducted using the following items (“nanoparticles” and “seed germination”, “nanomaterials” and “seed germination”) to filter the references in the title, abstract, and keywords of the published articles. The results indicated that nanoparticle (NP) treatments had a significantly positive effect on the final germination percentage (FGP), with a mean difference (MD) (that is, the overall effect) of 1.97 (0.96, 2.98) for the silver (Ag)-NP subgroup, 1.21 (0.34, 2.09) for the other-NP subgroup, 1.40 (0.88, 1.92) for the total based on the NP types, 1.47 (0.85, 2.09) for the “Concentrations: < 50 mg/L” subgroup, and 1.40 (0.88, 1.92) for the total based on the NP concentrations. Similarly, root length (RL) was positively and significantly affected by NP treatment, with an MD (95% CI) of 0.92 (0.76, 1.09) for the zinc (Zn)-NP subgroup, 0.79 (0.65, 0.92) for the other-NP subgroup, 0.82 (0.72, 0.93) for the total based on the NP types, 0.90 (0.77, 1.04) for the “Concentrations: ≤ 50 mg/L” subgroup, 0.80 (0.60, 0.99) for the “Concentrations: > 50 mg/L” subgroup, and 0.82 (0.72, 0.93) for the total based on the NP concentrations. However, there was no statistical correlation between the nanoparticle concentrations and shoot length (SL), due to the inclusion of zero in the 95% CI of the overall effect. Therefore, Ag-NPs could increase the FGP more than other-NPs, while Zn-NPs enhanced RL more. Moreover, NPs at lower concentrations could improve the FGP and RL of crop species to a larger extent than NPs at higher concentrations. This meta-analysis can provide a reference for the nanoparticle treatment technology utilization in agricultural and forest seeds.

Invasive plants as biosorbents for environmental remediation: a review

Water contamination is an environmental burden for the next generations, calling for advanced methods such as adsorption to remove pollutants. For instance, unwanted biowaste and invasive plants can be converted into biosorbents for environmental remediation. This would partly solve the negative effects of invasive plants, estimated at 120 billion dollars in the USA. Here we review the distribution, impact, and use of invasive plants for water treatment, with emphasis on the preparation of biosorbents and removal of pollutants such as cadmium, lead, copper, zinc, nickel, mercury, chromate, synthetic dyes, and fossil fuels. Those biosorbents can remove 90-99% heavy metals from aqueous solutions. High adsorption capacities of 476.190 mg/g for synthetic dyes and 211 g/g for diesel oils have been observed. We also discuss the regeneration of these biosorbents.

Zn-MOF decorated bio activated carbon for photocatalytic degradation, oxygen evolution and reduction catalysis

An emerging global necessity for alternative resources combined with maximum catalytic efficiency, low cost, and eco-friendly composite remains a hotspot in the scientific society. Hereby, a novel protocol is approached to design a heterostructure of Zinc MOF decorated on the surface of 2D activated carbon (AC) through a simplistic approach. To begin with, analytical, morphological and spectroscopical studies were performed to identify the functional moieties, cruciate-flower like morphology and oxidative state of atoms present in the composite Zn-MOF @AC. The photocatalytic material aids in degrading both cationic and anionic dye in a UV (254 nm) irradiated environment at a rate of 86.4% and 77.5% within 90 mins. Subsequently, the hybrid materials are coated on the carbon substrate to evaluate the catalytic activity using oxygen evolution and reduction reaction process. The mechanical insight for the catalytic activity relies on the electronic transitions of atoms on the edges of the sheets ascribing to d-d energy levels between the interfacial electron movement. Our composite exhibits an overpotential of 0.7 V and a Tafel slope of 70 mV/dec for the oxygen reduction reaction. This study proposes an alternate approach for developing MOF decorated carbon-based composites for photocatalytic degradability and energy necessity.

Green synthesis of ZrO2 nanoparticles and nanocomposites for biomedical and environmental applications: a review

Pollution and diseases such as the coronavirus pandemic (COVID-19) are major issues that may be solved partly by nanotechnology. Here we review the synthesis of ZrO₂ nanoparticles and their nanocomposites using compounds from bacteria, fungi, microalgae, and plants. For instance, bacteria, microalgae, and fungi secret bioactive metabolites such as fucoidans, digestive enzymes, and proteins, while plant tissues are rich in reducing sugars, polyphenols, flavonoids, saponins, and amino acids. These compounds allow reducing, capping, chelating, and stabilizing during the transformation of Zr⁴⁺ into ZrO₂ nanoparticles. Green ZrO₂ nanoparticles display unique properties such as a nanoscale size of 5-50 nm, diverse morphologies, e.g. nanospheres, nanorods and nanochains, and wide bandgap energy of 3.7-5.5 eV. Their high stability and biocompatibility are suitable biomedical and environmental applications, such as pathogen and cancer inactivation, and pollutant removal. Emerging applications of green ZrO₂-based nanocomposites include water treatment, catalytic reduction, nanoelectronic devices, and anti-biofilms.

Facile Fabrication of Novel NiFe2O4@Carbon Composites for Enhanced Adsorption of Emergent Antibiotics

Water purification is becoming one of the most pertinent environmental issues throughout the world. Among common types of water pollution involving heavy metals, pharmaceutical drugs, textile dyes, personal care products, and other persistent organic pollutants, the pollution of antibiotic drugs is increasingly emerging due to their adverse effects on microorganisms, aquatic animals, and human health. Therefore, the treatment of such contaminants is very necessary to reduce the concentration of antibiotic pollutants to permissible levels prior to discharge. Herein, we report the use of NiFe₂O₄@C composites from a bimetallic-based metal-organic framework Ni-MIL-88B(Fe) for removal of ciprofloxacin (CFX) and tetracycline (TCC). The effect of production temperatures (600–900 °C), solution pH (2–10), NiFe₂O₄@C dose (0.05–0.2 g/L), concentration of antibiotics (10–60 mg/L), and uptake time (0–480 min) was investigated systematically. Response surface methodology and central composite design were applied for quadratic models to discover optimum conditions of antibiotic adsorption. With high coefficients of determination (R² = 0.9640–0.9713), the proposed models were significant statistically. Under proposed optimum conditions, the adsorption capacity for CFX and TCC were found at 256.244, and 105.38 mg/g, respectively. Recyclability study was employed and found that NiFe₂O₄@C-900 could be reused for up to three cycles, offering the potential of this composite as a good adsorbent for removal of emergent antibiotics.