Investigation of the adsorption behavior of Pb(II) onto natural-aged microplastics as affected by salt ions

Adsorption of Cr(VI) and Cr(III) on layered pipe scales and the effects of disinfectants in drinking water distribution systems

Pipe scales in drinking water distribution systems (DWDS) potentially adsorb chromium (Cr). Meanwhile, the fate of Cr in pipe scales and water could be influenced by the disinfectants used in DWDS since they might influence the valence state of Cr. Therefore, the adsorption of Cr (Cr(VI) and Cr(III)) on pipe scales, the transformation between different valence states, and the effects of disinfectants present in DWDS are important research topics for improving tap water quality but have not yet been sufficiently investigated. This study investigated the properties of layered pipe scales and conducted adsorption kinetic experiments in single and binary Cr(VI) and Cr(III) systems, as well as experiments related to the oxidation and adsorption of Cr(III) under the influence of decaying disinfectants. According to the results, pipe scales exhibited distinct layered structures with varying mechanisms for the adsorption of Cr(VI) and Cr(III). Cr(VI) was adsorbed through surface complexation on the surface and porous core layers, while redox reactions predominantly occurred on the shell-like layer. Furthermore, Cr(III) was adsorbed via surface precipitation on the three-layer pipe scales. Importantly, disinfectants promoted the transformation of Cr(III) to the less readily released Cr(VI) in pipe scales, reducing the Cr exposure risk from the pipe scale phase. Pipe scales also decreased the Cr(VI) concentration in water (almost 0 mg/L), enhancing the safety of DWDS. This study provides theoretical guidance on the safe operation of DWDS.

Microplastic atmospheric pollution in an urban Southern Brazil region: What can spider webs tell us?

The World Health Organization categorizes air pollution as the presence of one or more contaminants in the atmosphere such as smoke, dust, and particulate matter like microplastics, which are considered a priority pollutant. However, only a few studies have been developed on atmospheric pollution, and knowledge about MPs in the atmosphere is still limited. Spider webs have been tested and used as a passive sampling approach to study anthropogenic pollution. Despite this, studies on microplastic contamination using spiderwebs as samplers are scarce. Thus, this study uses spider webs as passive indicators to investigate air quality regarding microplastic contamination in an urbanized area. Therefore, 30 sampling points were selected, and webs of Nephilingis cruentata were collected. The spider webs were dipped in KOH 10 %. After digestion, the solution was washed and sieved through a 90 µm geological sieve. The remaining material was transferred to a Petri dish with filter paper, quantified, and identified by type and color. The chemical composition of the polymers was determined using Raman spectroscopy. 3138 microplastics were identified (2973 filaments and 165 fragments). The most frequent colors were blue and black. Raman spectroscopy revealed five types of polymers: Isotactic Polypropylene, Polyethylene Terephthalate, Polyurethane, Polyamide, and Direct Polyethylene.

Design, characterization and implementation of cost-effective sodium alginate/water hyacinth microspheres for remediation of lead and cadmium from wastewater

The aquatic plant water hyacinth was dried then cross-linked with sodium alginate to produce ionic cross-linked microspheres. The mechanism of controlling cadmium (Cd) and lead (Pb) in wastewater was tested by DFT at B3LYP level using LANL2DZ basis set. Modeling results indicated that the hydrated metals could interact with sodium alginate (SA)/water hyacinth (WH) microspheres through hydrogen bonding. Adsorption energies showed comparable results while total dipole moment and HOMO/LUMO band gap energy showed slight selectivity towards the remediation of Pb. FTIR spectra of cross-linked microspheres indicated that WH is forming a composite with SA to change its structure into a microsphere to remove Cd and Pb from water. Raman mapping revealed that the active sites along the surface of the microspheres enable for possible adsorption of metals through its surface. This finding is supported by molecular electrostatic potential and optical confocal microscopy. Atomic absorption spectroscopy results confirmed that the microspheres are more selective for Pb than Cd. It could be concluded that WH cross-linked with SA showed the potential to remove heavy metals through its unique active surface as confirmed by both molecular modeling and experimental findings.

The environmental effects of microplastics and microplastic derived dissolved organic matter in aquatic environments: A review

Currently, microplastics (MPs) have ubiquitously distributed in different aquatic environments. Due to the unique physicochemical properties, MPs exhibit a variety of environmental effects with the coexisted contaminants. MPs can not only alter the migration of contaminants via vector effect, but also affect the transformation process and fate of contaminants via environmental persistent free radicals (EPFRs). The aging processes may enhance the interaction between MPs and co-existed contaminants. Thus, it is of great significance to review the aging mechanism of MPs and the influence of coexisted substances, the formation mechanism of EPFRs, environmental effects of MPs and relevant mechanism. Moreover, microplastic-derived dissolved organic matter (MP-DOM) may also influence the elemental biogeochemical cycles and the relevant environmental processes. However, the environmental implications of MP-DOM are rarely outlined. Finally, the knowledge gaps on environmental effects of MPs were proposed.

Aging and adsorption behavior of PP-MPs for methylene blue and tetracycline in unitary and binary systems

The omnipresence of microplastics (MPs) around the world has attracted extensive attention in the past decade with more focuses on the interactions of standard MPs without additives in regular shapes and individual pollutant, whereas the actual MPs containing various additives in irregular shapes and complex pollutants are often co-occurrence in the environments. In this paper, the adsorption performance of disposable polypropylene (PP) cups-based MPs subjected to ultraviolet irradiation was investigated in unitary and binary water matrices. The surface characteristics were analyzed and the experimental data of adsorption were fitted by various kinetic and isotherm models, and the results indicated that more cracks and oxygen-containing functional groups with decreased hydrophobicity were produced with aging, and electrostatic attraction and hydrogen bonding dominated methylene blue (MB) and tetracycline (TC) capture in the individual system. Moreover, pseudo-second order kinetic model better described the adsorption processes. In the binary system, the co-existence of TC promoted MB uptake, while the presence of MB inhibited TC capture. In addition, TC adsorption was enhanced by Ca2+, maybe due to its complexation effect, while the presence of mono- and divalent inorganic salts inhibited MB capture. This research provides useful insights for the fate of PP-MPs and organic pollutants in the complex environments.

Retention of ZnO nanoparticles onto polypropylene and polystyrene microplastics: Aging-associated interactions and the role of aqueous chemistry

Microplastics (MPs) are pervasive and undergo environmental aging processes, which alters potential interaction with the co-contaminants. Hence, to assess their contaminant-carrying capacity, mimicking the weathering characteristics of secondary MPs is crucial. To this end, the present study investigated the interaction of Zinc oxide (nZnO) nanoparticles with non-irradiated (NI) and UV-irradiated (UI) forms of the most abundant MPs, such as polypropylene (PP) and polystyrene (PS), in aqueous environments. SEM images revealed mechanical abrasions on the surfaces of NI-MPs and their subsequent photoaging caused the formation of close-ended and open-ended cracks in UI-PP and UI-PS, respectively. Batch-sorption experiments elucidated nZnO uptake kinetics by PP and PS MPs, suggesting a sorption-desorption pathway due to weaker and stronger sorption sites until equilibrium was achieved. UI-PP showed higher nZnO (∼3000 mg/kg) uptake compared to NI-PP, while UI-PS showed similar or slightly decreased nZnO (∼2000 mg/kg) uptake compared to NI-PS. FTIR spectra and zeta potential measurements revealed electrostatic interaction as the dominant interaction mechanism. Higher nZnO uptake by MPs was noted between pH 6.5 and 8.5, whereas it decreased beyond this range. Despite DOM, MPs always retained ∼874 mg/kg nZnO irrespective of MPs type and extent of aging. The experimental results in river water showed higher nZnO uptake on MPs compared to DI water, attributed to mutual effect of ionic competition, DOM, and MP hydrophobicity. In the case of humic acids, complex synthetic and natural water matrices, NI-MPs retained more nZnO than UI-MPs, suggesting that photoaged MPs sorb less nZnO under environmental conditions than non-photoaged MPs. These findings enhance our understanding on interaction of the MPs with co-contaminants in natural environments.

Polyamide 6 microplastics as carriers led to changes in the fate of bisphenol A and dibutyl phthalate in drinking water distribution systems: The role of adsorption and interfacial partitioning

Microplastics (MPs) co-exist with plastic additives and other emerging pollutants in the drinking water distribution systems (DWDSs). Due to their strong adsorption capacity, MPs may influence the occurrence of additives in DWDSs. The article investigated the occurrence of typical additives bisphenol A (BPA) and dibutyl phthalate (DBP) in DWDSs under the influence of polyamide 6 (PA6) MPs and further discussed the partitioning of BPA/DBP on PA6s, filling a research gap regarding the impact of adsorption between contaminants on their occurrence within DWDSs. In this study, adsorption experiments of BPA/DBP with PA6s and pipe scales were conducted and their interaction mechanisms were investigated. Competitive adsorption experiments of BPA/DBP were also carried out with site energy distribution theory (SEDT) calculations. The results demonstrated that PA6s might contribute to the accumulation of BPA/DBP on pipe scales. The adsorption efficiencies of BPA/DBP with both PA6s and pipe scales were 26.47 and 2.61 times higher than those with only pipe scales. It was noteworthy that BPA had a synergistic effect on the adsorption of DBP on PA6s, resulting in a 26.47 % increase in DBP adsorption. The article provides valuable insights for the compounding effect of different types of additives in water quality monitoring and evaluation.

Interaction characteristics and mechanism of Cr(VI)/Cr(III) with microplastics: Influence factor experiment and DFT calculation

The coexistence of highly toxic heavy metal chromium and new pollutants microplastics has been widely present, and the interaction behavior and mechanism of the two are crucial for their environmental effects in coexisting environments, which urgently need to be further explored. Firstly, the interaction characteristics of polyamide (PA) and polyethylene (PE) with Cr(VI)/Cr(III) were investigated, where PA exhibited higher adsorption capacity of both Cr(VI) and Cr(III) than PE among various environmental conditions. The higher adsorption energy of PA on Cr(VI)/Cr(III) was also achieved by DFT calculation, and the bending configuration of PA during the adsorption process may be beneficial for its interaction with Cr. Then, the combination of characterization analysis and DFT calculation showed that significant chemical bonding occurred in the interaction between CO bond of PA and Cr(III), weak chemical interactions occurred in the adsorption of PE with Cr(III) and PA with Cr(VI), while the adsorption of PE with Cr(VI) was mainly physical effects. This study provides theoretical support for pollution control of microplastics and chromium in co-existing environment.

Microplastics change soil properties, plant performance, and bacterial communities in salt-affected soils

Microplastics (MPs) are emerging contaminants found globally. However, their effects on soil-plant systems in salt-affected habitats remain unknown. Here, we examined the effects of polyethylene (PE) and polylactic acid (PLA) on soil properties, maize performance, and bacterial communities in soils with different salinity levels. Overall, MPs decreased soil electrical conductivity and increased NH4+-N and NO3--N contents. Adding NaCl alone had promoting and inhibitive effects on plant growth in a concentration-dependent manner. Overall, the addition of 0.2% PLA increased shoot biomass, while 2% PLA decreased it. Salinity increased Na content and decreased K/Na ratio in plant tissues (particularly roots), which were further modified by MPs. NaCl and MPs singly and jointly regulated the expression of functional genes related to salt tolerance in leaves, including ZMSOS1, ZMHKT1, and ZMHAK1. Exposure to NaCl alone had a slight effect on soil bacterial α-diversity, but in most cases, MPs increased ACE, Chao1, and Shannon indexes. Both MPs and NaCl altered bacterial community composition, although the specific effects varied depending on the type and concentration of MPs and the salinity level. Overall, PLA had more pronounced effects on soil-plant systems compared to PE. These findings bridge knowledge gaps in the risks of MPs in salt-affected habitats.

Effects of microplastics on microbial community structure and wheatgrass traits in Pb-contaminated riparian sediments under flood-drainage-planting conditions

The coexistence of microplastics (MPs) and heavy metals in sediments has caused a potential threat to sediment biota. However, differences in the effects of MPs and heavy metals on microbes and plants in sediments under different sediment conditions remain unclear. Hence, we investigated the influence of polyethylene (PE) and polylactic acid (PLA) MPs on microbial community structure, Pb bioavailability, and wheatgrass traits under sequential incubation of sediments (i.e., flood, drainage, and planting stages). Results showed that the sediment enzyme activities presented a dose-dependent effect of MPs. Besides, 10 % PLA MPs significantly increased the F1 fractions in three stages by 11.13 %, 30.10 %, and 17.26 %, respectively, thus resulting in higher Pb mobility and biotoxicity. MPs altered sediment bacterial composition and structures, and bacterial community differences were evident in different incubation stages. Moreover, the co-exposure of PLA MPs and Pb significantly decreased the shoot length and total biomass of wheatgrass and correspondingly activated the antioxidant enzyme activity. Further correlation analysis demonstrated that community structure induced by MPs was mainly driven by sediment enzyme activity. This study contributes to elucidating the combined effects of MPs and heavy metals on sediment ecosystems under different sediment conditions.

Effects of microplastics on sedimentary geochemical properties and microbial ecosystems combined with hydraulic disturbance

Microplastics (MPs) pollution is widely investigated owing to its potential threats to river ecosystems. However, it remains unclear whether hydraulic disturbance deepens or mitigates the effects of MPs-contaminated sediments on the river environment. Herein, we studied the impact of sediment aggregates, organic matter, and enzyme activity, with emphasis on microbial community structure and function in sediments exposed to MPs (1 %, 5 %, and 10 % w/w) in conjunction with hydraulic disturbance. The experimental results showed that the influence of MPs on the sediment under hydraulic disturbance is more significant than that of static culture, especially for various environmental factors (MWD, MBC, and sucrase activity etc.). The proportions of the >0.05 mm-fraction aggregates increased from 74-76 % to 82-88 % in the sediment throughout the entire disturbance process. It has been found that the disturbance generally promotes the interaction between MPs and sediments. FAPROTAX analysis demonstrated that the disturbance reduced the difference in effects on microbial functional genes between the control group and the MPs-added groups by up to 10 times, suggesting that the effects of disturbance on MPs-contaminated sediments are relatively complex. This work provides new insights into the effects of hydraulic disturbance on physicochemical properties and microbial communities of MPs-contaminated sediment.

Experimental and simulated microplastics transport in saturated natural sediments: Impact of grain size and particle size

Microplastics (MPs) present in terrestrial environments show potential leaching risk to deeper soil layers and aquifer systems, which threaten soil health and drinking water supply. However, little is known about the environmental fate of MPs in natural sediments. To examine the MPs transport mechanisms in natural sediments, column experiments were conducted using different natural sediments and MPs (10-150 µm) with conservative tracer. Particle breakthrough curves (BTCs) and retention profiles (RPs) were numerically interpreted in HYDRUS-1D using three different models to identify the most plausible deposition mechanism of MPs. Results show that the retention efficiency for a given particle size increased with decreasing grain size, and RPs exacerbated their hyper-exponential shape in finer sediments. Furthermore, the amounts of MPs present in the effluent increased to over 85 % as MPs size decreased to 10-20 µm in both gravel and coarse sand columns, while all larger MPs (125-150 µm) were retained in the coarse sand column. The modeling results suggested that the blocking mechanism becomes more important with increasing particle sizes. In particular, the attachment-detachment without blocking was the most suited parameterization to interpret the movement of small MPs, while a depth-dependent blocking approach was necessary to adequately describe the fate of larger particles.

Interaction of microplastics with heavy metals in soil: Mechanisms, influencing factors and biological effects

Microplastics (MPs) and heavy metals (HMs) in soil contamination are considered an emerging global problem that poses environmental and health risks. However, their interaction and potential biological effects remain unclear. Here, we reviewed the interaction of MPs with HMs in soil, including its mechanisms, influencing factors and biological effects. Specifically, the interactions between HMs and MPs mainly involve sorption and desorption. The type, aging, concentration, size of MPs, and the physicochemical properties of HMs and soil have significant impacts on the interaction. In particular, MP aging affects specific surface areas and functional groups. Due to the small size and resistance to decomposition characteristics of MPs, they are easily transported through the food chain and exhibit combined biological effects with HMs on soil organisms, thus accumulating in the human body. To comprehensively understand the effect of MPs and HMs in soil, we propose combining traditional experiments with emerging technologies and encouraging more coordinated efforts.

Microplastics induced the differential responses of microbial-driven soil carbon and nitrogen cycles under warming

The input of microplastics (MPs) and warming interfere with soil carbon (C) or nitrogen (N) cycles. Although the effects of warming and/or MPs on the cycles have been well studied, the biological coupling of microbial-driven cycles was neglected. Here, the synergistic changes of the cycles were investigated using batch incubation experiments. As results, the influences of MPs were not significant at 15, 20, and 25 °C, and yet, high temperature (i.e., 30 °C) reduced the respiration of high-concentration MPs-amended soil by 9.80%, and increased dissolved organic carbon (DOC) by 14.74%. In contrast, high temperature did not change the effect of MPs on N. The decrease of microbial biomass carbon (MBC) and the constant of microbial biomass nitrogen (MBN) indicated that microbial N utilization was enhanced, which might be attributed to the enrichments of adapted populations, such as Conexibacter, Acidothermus, and Acidibacter. These observations revealed that high temperature and MPs drove the differential response of soil C and N cycles. Additionally, the transcriptomic provided genomic evidence of the response. In summary, the high temperature was a prerequisite for the MPs-driven response, which underscored new ecological risks of MPs under global warming and emphasized the need for carbon emission reduction and better plastic product regulation.

Adsorption interactions between typical microplastics and enrofloxacin: Relevant contributions to the mechanism

Microplastics (MPs) are increasingly contaminating the environment and they can combine with antibiotics as carriers to form complex contaminants. In this study, we systematically investigated the interactions between the antibiotic enrofloxacin (ENR) and MPs comprising polyethylene (PE), polyvinyl chloride (PVC), and polystyrene (PS). Characterization was performed by using conventional techniques and the mechanisms involved in interactions were initially explored based on adsorption kinetics, isotherms, and resolution experiments, and the adsorption capacities of the MPs were determined. In addition, the extended Derjaguin-Landau-Verwey-Overbeek theory was used to investigate the interaction mechanisms. The results showed that the interactions were weaker in strong acidic and alkaline environments, and the interactions were also inhibited at higher salt ion concentrations. The saturation adsorption amounts of ENR on PVC, PE, and PS were 74.63 μg/g, 103.09 μg/g, and 142.86 μg/g, respectively. The interactions between MPs and ENR were dominated by hydrophobic interactions, followed by van der Waals forces and acid-base forces. This study provides new insights into the adsorption behavior of ENR by MPs.

Effects of naturally aged microplastics on the distribution and bioavailability of arsenic in soil aggregates and its accumulation in lettuce

Naturally aged microplastics (NAMPs) and arsenic (As) have been reported to coexist in and threaten potentially to soil-plant ecosystem. The research explored the combined toxic effects of NAMPs and As to lettuce (Lactuca sativa L.) growth, and the distribution, accumulation and bioavailability of As in soil aggregates. The As contaminated soil with low, medium and high concentrations (L-As, M-As, H-As) were treated with or without NAMPs, and a total of six treatments. The results displayed that, in comparison to separate treatments of L-As and M-As, the presence of NAMPs increased the total biomass of lettuce grown at these two As concentrations by 68.9 % and 55.4 %, respectively. Simultaneous exposure of NAMPs and L-As or M-As led to a decrease in As content in shoot (0.45-2.17 mg kg-1) and root (5.68-14.66 mg kg-1) of lettuce, indicating an antagonistic effect between them. In contrast, co-exposure to H-As and NAMPs showed synergistic toxicity, and the leaf chlorophyll and nutritional quality of lettuce were also reduced. NAMPs altered the ratio of different soil aggregate fractions and the distribution of bioavailable As within them, which influenced the absorption of As by lettuce. In conclusion, these direct observations assist us in enhancing the comprehend of the As migration and enrichment characteristics in soil-plant system under the influence of NAMPs.

Selective removal of thallium from water by MnO2-doped magnetic beads: Performance and mechanism study

Aqueous thallium has posed an increasing threat to environment as human's intensified activities in mining, refining, process and discharge. Remediation on thallium pollution has been of up-most importance to water treatment. In present work, MnO2 and magnetic Fe3O4 have been implanted to sodium alginate (SA) in presence of carboxyl methyl cellulose (CMC), and the resultant beads consisted of SA/CMC/MnO2/Fe3O4 were characterized. The materials were applied to treatment of Tl-contaminated water as adsorbent in lab. The removal results revealed that the adsorption capacity reached 38.8 mg (Tl)·g (beads)-1 and almost 100 % removal efficiency was achieved. The residual Tl was below 0.1 μg·L-1, meeting the discharge standard regulated in China. The kinetic adsorption was better described as a pseudo-second-order and three-step intra-particle diffusion model. Freundlich isotherm was well fitted the experimental data. The absorbent shown an excellent competitive specificity (KTl/M: ∼104!) over common hazardous ions Cu2+, Cd2+, Co2+, Pb2+ and Cr3+, as well as naturally abundant K+ and Na+ (KTl/M: 10-102) in mimic environmental conditions. Regeneration and reusability of the absorbent was also verified by five absorption-desorpotion cycles. XPS results revealed that a redox reaction between Mn4+ with Tl+, and an ion exchange of H+ (-O-Fe) and Tl+ were assumed to be main process for the specific capturing. This study provided an efficient SA/CMC/MnO2/Fe3O4 composite beads that could be a promising adsorbent for Tl-polluted water treatment.

Effects of micro-sized biodegradable plastics on Microcystis aeruginosa

Plethora of plastics are being used in current society, generating huge amounts of plastic waste. Non-biodegradability of conventional plastics is one of the main challenges to treat plastic waste. In an effort to increase the efficiency of plastic waste treatment, biodegradable plastics have gained attention. Although the use of biodegradable plastics has been increased, their potential effects on the environments are not fully elucidated yet. In this study, the impacts of micro-sized non-biodegradable plastic (i.e., polystyrene (PS)) and micro-sized biodegradable plastics (i.e., polycaprolactone (PCL) and polylactic acid (PLA)) on Microcystis aeruginosa were investigated. Regardless of microplastic (MP) types, MP treatments inhibited the growth of M. aeruginosa at the beginning (4 days) while significant dose-dependent effect was not observed in the range of 0.1 to 10 mg/L. However, after long-term exposure (12 days), micro-sized biodegradable plastics stimulated the growth of M. aeruginosa (up to 73 % increase compared to the control). The photosynthetic activity showed a similar trend to the cell growth. The MP treatments induced the production of extracellular polymeric substances (EPS). Indeed, micro-sized PCL and PLA stimulated the production of protein compounds in EPS. These might have affected the releases of chemicals from PCL and PLA, suggesting that the chemicals in biodegradable plastic leachates would promote the growth of M. aeruginosa in long-term exposure. The MP treatments also induced cyanotoxin (microcystin-LR) productions. Our results give a new insight into the cyanobacterial blooming and suggest a novel relationship between harmful algal blooms (HABs) and biodegradable plastics.

Efficient and Selective Removal of Heavy Metals and Dyes from Aqueous Solutions Using Guipi Residue-Based Hydrogel

The presence of organic dyes and heavy metal ions in water sources poses a significant threat to human health and the ecosystem. In this study, hydrogel adsorbents for water pollution remediation were synthesized using Guipi residue (GP), a cellulose material from Chinese herbal medicine, and chitosan (CTS) through radical polymerization with acrylamide (AM) and acrylic acid (AA). The characteristics of the hydrogels were analyzed from a physicochemical perspective, and their ability to adsorb was tested using model pollutants such as Pb2+, Cd2+, Rhodamine B (RhB), and methyl orange (MO). The outcomes revealed that GP/CTS/AA-co-AM, which has improved mechanical attributes, effectively eliminated these pollutants. At a pH of 4.0, a contact duration of 120 min, and an initial concentration of 600 mg/L for Pb2+ and 500 mg/L for Cd2+, the highest adsorption capabilities were 314.6 mg/g for Pb2+ and 289.1 mg/g for Cd2+. Regarding the dyes, the GP/CTS/AA-co-AM hydrogel displayed adsorption capacities of 106.4 mg/g for RhB and 94.8 mg/g for MO, maintaining a stable adsorption capacity at different pHs. Compared with other competitive pollutants, GP/CTS/AA-co-AM demonstrated a higher absorption capability, mainly targeted toward Pb2+. The adsorption processes for the pollutants conformed to pseudo-second-order kinetics models and adhered to the Langmuir models. Even after undergoing five consecutive adsorption and desorption cycles, the adsorption capacities for heavy metals and dyes remained above 70% and 80%. In summary, this study effectively suggested the potential of the innovative GP/CTS/AA-co-AM hydrogel as a practical and feasible approach for eliminating heavy metals and dyes from water solutions.

Aging and characterization of disposable polypropylene plastic cups based microplastics and its adsorption for methylene blue

Microplastics (MPs) as emerging pollutants are of increasing concern, due to their ubiquitous, uncertain, and complex environmental impacts. Different from the standard spherical MPs without additives, here polypropylene microplastics (PP-MPs) in flake derived from the disposable plastic cup in food-grade in daily life were studied. The characterization of PP-MPs demonstrated that the carbonyl index represented the aging degree was enhanced from 0.26 significantly to 0.82 after 10 days, and the aging process fitted well with pseudo-first-order kinetic. Moreover, the crystallinity degree, polarity and surface negative charges were enhanced, while the hydrophobicity was decreased. The adsorption behavior of PP-MPs toward methylene blue (MB), and the impacts of various pHs, salinities, and humic acid in aquatic environments were also explored. The pseudo-second-order kinetic, Henry and Sips isotherm models provided a good correlation with the experimental data, indicating that the rate-limiting step was closely related with the complex surface adsorption, and the hydrophobic partitioning, polar interaction, electrostatic attraction, and hydrogen bonding were possibly involved in the adsorption. These exhaustive experiments aim to provide a theoretical basis for assessing and better understanding the environmental behavior of disposable PP plastic cups in nature.

Impact of polyamide microplastics on riparian sediment structures and Cd(II) adsorption: A comparison of natural exposure, dry-wet cycles, and freeze-thaw cycles

Microplastics (MPs) accumulation in sediments has posed a huge threat to freshwater ecosystems. However, it is still unclear the effect of MPs on riparian sediment structures and contaminant adsorption under different hydrological processes. In this study, three concentrations of polyamide (PA) MPs-treated sediments (0.1%, 1%, and 10%, w/w) were subjected to natural (NA) exposure, dry-wet (DW) cycles, and freeze-thaw (FT) cycles. The results indicated that PA MPs-added sediment increased the micro-aggregates by 10.1%-18.6% after FT cycles, leading to a decrease in aggregate stability. The pH, OM, and DOC of sediments were significantly increased in DW and FT treatments. In addition, the increasing concentration of PA MPs showed an obvious decrease in aromaticity, humification, and molecular weight of sediment DOM in FT treatments. Also, high level of MPs was more likely to inhibit the formation of humic-like substances and tryptophan-like proteins. For DW and FT cycles, 0.1% and 1% PA MPs-treated sediments slightly increased the adsorption capacity of Cd(II), which may be ascribed to the aging of MPs. Further correlation analysis found that DW and FT altered the link between DOM indicators, and aggregate stability was directly related to the changes in sediment organic carbon. Our findings revealed the ecological risk of MPs accumulating in riparian sediments under typical hydrological processes.

Adsorption of As(III) by microplastics coexisting with antibiotics

Although recent studies have been conducted on the pollution and toxicity of microplastics with heavy metals or antibiotics, it is necessary to further investigate the coexistence of antibiotics and heavy metals on the surface of microplastics. In this study, the mechanisms of As(III) adsorption by polystyrene (PS) and polyamide (PA) microplastics in the presence of antibiotics (ciprofloxacin, CIP) were investigated. Adsorption behavior was investigated using kinetic and isotherm models, and the effects of microplastic particle size, aging, ion concentration, pH, xanthic acid (FA), and tannic acid (TA) were considered. Adsorption kinetics and isotherm models showed that the kinetics of As(III) adsorption on PS were consistent with a pseudo-first-order model; the kinetics of adsorption on PA were more consistent with segmented linear regression. The Freundlich model is consistent with the adsorption isotherms of As(III) on PS and PA. The smaller the microplastic particle size and the longer the aging time, the better the adsorption of As(III). Increasing NO3-significantly inhibited the adsorption of As(III) by PS, while it first promoted and then inhibited the adsorption by PA. The effect of pH was similar to that ofNO3-. The adsorption of As(III) by PS was significantly promoted by FA and TA, regardless of the presence of CIP; the adsorption of As(III) by PA was inhibited. Scanning electron microscopy (SEM) was used to characterize microscopic morphology of pristine and aged PS and PA microplastics; Fourier transform infrared (FTIR) and X-ray absorption spectroscopy (XPS) revealed changes in surface functional groups of PS and PA, while demonstrating the importance of different functional groups in exogenous additives (CIP and dissolved organic matter, DOM) in the adsorption of As(III). This study provides new insight into adsorption behaviors and interaction mechanisms between ternary pollutants.

Iron plaque formation and its influences on the properties of polyethylene plastic surfaces in coastal wetlands: Abiotic factors and bacterial community

Iron (Fe) plaques in coastal wetlands are widely recognized because of their strong adsorption affinity for natural particles, but their interaction behaviors and mechanisms with plastics remain unknown. Through laboratory incubation experiments, paired with multiple characterization methods and microbial analysis, this work focused on the characteristics of Fe plaques on low-density polyethylene plastic surfaces and their relationship with environmental factors in coastal wetlands (Mangrove and Spartina alterniflora soil). The results showed that iron plaques increased the adhesive force of the plastic surface from 65.25 to 300 nN and promoted the oxidation of the plastic surface. Fe plaque formation was stimulated by salinity, anaerobic conditions, natural organic matter, and a weak alkaline scenario (pH 8.0-8.3). The Fe content showed a stable positive correlation with heavy metals loading (i.e., As, Mn, Co, Cr, Pb, and Zn). Furthermore, we revealed that Fe plaque was positively regulated by Nitrospirae through 16S rRNA high-throughput sequencing analysis. Meanwhile, Verrucomicrobia and Kiritimatiellaeota. may act as depressants by consuming salt. This work illustrated that iron plaques could enhance the role of plastics in contaminant migration by altering their adsorption performance, providing new insights into plastic interface behavior and potential ecological effects in coastal wetlands.

Synthesis of salicylaldehyde tailored PAMAM dendrimers/chitosan for adsorption of aqueous Hg(II): Performance and mechanism

Water pollution caused by Hg(II) exerts hazardous effect to environmental safety and human health. Herein, a family of salicylaldehyde tailored poly(amidoamine) (PAMAM) dendrimers/chitosan composites (G0-S/CTS, G1-S/CTS, and G2-S/CTS) were prepared and used for the removal of Hg(II) from water solution. The adsorption performance of the as-prepared composites for Hg(II) was thoroughly demonstrated by determining various influencing factors. G0-S/CTS, G1-S/CTS and G2-S/CTS exhibited competitive adsorption capacity and good adsorption selective property for Hg(II). The maximum adsorption capacity of G0-S/CTS, G1-S/CTS and G2-S/CTS for Hg(II) were 1.86, 2.18 and 4.47 mmol‧g-1, respectively. The adsorption for Hg(II) could be enhanced by raising initial Hg(II) concentration and temperature. The adsorption process was dominated by film diffusion processes with monolayer adsorption behavior. The functional groups of NH2, CONH, CN, OH, CO and CN were mainly responsible for the adsorption of Hg(II). G0-S/CTS, G1-S/CTS and G2-S/CTS displayed good regeneration property and the regenerate rate maintained 95.00 % after five adsorption-desorption cycles. The as-prepared adsorbents could be potentially used for the efficient removal of Hg(II) from aqueous solution.

Efficient adsorption of organic pollutants phthalates and bisphenol A (BPA) utilizing magnetite functionalized covalent organic frameworks (MCOFs): A promising future material for industrial applications

The utilization of phthalates and bisphenol A (BPA) as the major component in plastic and its derivative industry has raised concerns among the public due to the harmful effects caused by these organic pollutants. These pollutants are found to exhibit unique physicochemical properties that allow the pollutants to have prolonged existence in the environment, thus causing damage to the environment. Since phthalates and bisphenol A are used in a variety of industrial applications, the industry must recover these compounds from its water before releasing the pollutants into the environment. As a result, these materials have a promising future in industrial applications. Therefore, the discovery of new quick and reliable abatement technologies is important to ensure that these organic pollutants can be detected and removed from the water sources. This review highlights the use of the adsorption method to remove phthalates and BPA from water sources by employing novel modified adsorbent magnetite functionalized covalent organic frameworks (MCOFs). MCOFs is a new class of porous materials that have demonstrated promising features in a variety of applications due to their adaptable structures, significant surface areas, configurable porosity, and customizable chemistry. The structural attributes, functional design strategies, and specialized for environmental applications before offering some closing thoughts and suggestions for further research were discussed in this paper in addition to developing an innovative solution for the industry to the accessibility for clean water.

Interactions between microplastics and contaminants: A review focusing on the effect of aging process

Microplastics (MPs) in the environment are a major global concern due to their persistent nature and wide distribution. The aging of MPs is influenced by several processes including photodegradation, thermal degradation, biodegradation and mechanical fragmentation, which affect their interaction with contaminants. This comprehensive review aims to summarize the aging process of MPs and the factors that impact their aging, and to discuss the effects of aging on the interaction of MPs with contaminants. A range of characterization methods that can effectively elucidate the mechanistic processes of these interactions are outlined. The rate and extent of MPs aging are influenced by their physicochemical properties and other environmental factors, which ultimately affect the adsorption and aggregation of aged MPs with environmental contaminants. Pollutants such as heavy metals, organic matter and microorganisms have a tendency to accumulate on MPs through adsorption and the interactions between them impact their environmental behavior. Aging enhances the specific surface area and oxygen-containing functional groups of MPs, thereby affecting the mechanism of interaction between MPs and contaminants. To obtain a more comprehensive understanding of how aging affects the interactions, this review also provides an overview of the mechanisms by which MPs interact with contaminants. In the future, there should be further in-depth studies of the potential hazards of aged MPs in different environments e.g., soil, sediment, aquatic environment, and effects of their interaction with environmental pollutants on human health and ecology.

Adsorption/desorption of mercury (II) by artificially weathered microplastics: Kinetics, isotherms, and influencing factors

While both mercury (Hg) and microplastics (MPs) are well-studied global pollutants, comparatively little is known about the interactions between them and the mobilization of Hg from MPs into organisms. We examined the affinity of Hg(II) to artificially weathered MPs, including polyamide (w-PA), polyethylene (w-PE), polyethylene terephthalate (w-PET), polyester fibers (w-PEST), polyvinyl chloride (w-PVC), and polylactic acid (w-PLA), along with crumb rubber (CR) and PE collected from a wastewater treatment plant (WWTP-PE). WWTP-PE, CR, and w-PEST had particularly high Hg(II) affinities, which can be attributed to electrostatic interaction and pore filling. The adsorption followed a pseudo-second-order kinetic process and fitted the Freundlich model, suggesting multi-step (mass transfer and intraparticle diffusion) and heterogeneous adsorptions. Hydrochemical conditions (pH, dissolved organic matter (DOM), salinity and co-existent metal ions) all impacted Hg-MP behavior. Changes in Hg speciation and MP surface properties contributed to the different Hg(II) adsorption capacities for the MPs. Weathering of MPs generally increased the adsorption of Hg(II) onto MPs, but CR, PET and PEST did not follow this trend. Less than 3% of adsorbed Hg(II) was mobilized from the MPs in freshwater, but that increased up to 73% under simulated avian digestive conditions, suggesting increased bioavailability of Hg(II) from ingested MPs. Overall, weathered MPs adsorb and retain Hg(II) under environmentally relevant conditions but desorb much of it in simulated avian digestion fluid, suggesting that birds that ingest MPs may have increased Hg(II) exposure.

Co-exposure of microplastics and heavy metals in the marine environment and remediation techniques: a comprehensive review

Microplastics (MPs) and heavy metals are significant pollutants in the marine environment, necessitating effective remediation strategies to prevent their release into the sea through sewage and industrial effluent. This comprehensive review explores the current understanding of the co-exposure of MPs and heavy metal-enriched MPs, highlighting the need for effective remediation methods. Various mechanisms, including surface ion complexation, hydrogen bonding, and electrostatic forces, contribute to the adsorption of heavy metals onto MPs, with factors like surface area and environmental exposure duration playing crucial roles. Additionally, biofilm formation on MPs alters their chemical properties, influencing metal adsorption behaviors. Different thermodynamic models are used to explain the adsorption mechanisms of heavy metals on MPs. The adsorption process is influenced by various factors, including the morphological characteristics of MPs, their adsorption capacity, and environmental conditions. Additionally, the desorption of heavy metals from MPs has implications for their bioavailability and poses risks to marine organisms, emphasizing the importance of source reduction and remedial measures. Hybrid approaches that combine both conventional and modern technologies show promise for the efficient removal of MPs and heavy metals from marine environments. This review identifies critical gaps in existing research that should be addressed in future studies including standardized sampling methods to ensure accurate data, further investigation into the specific interactions between MPs and metals, and the development of hybrid technologies at an industrial scale. Overall, this review sheds light on the adsorption and desorption mechanisms of heavy metal-enriched MPs, underscoring the necessity of implementing effective remediation strategies.

Effect of Polymer Aging on Uptake/Release Kinetics of Metal Ions and Organic Molecules by Micro- and Nanoplastics: Implications for the Bioavailability of the Associated Compounds

The main driver of the potential toxicity of micro- and nanoplastics toward biota is often the release of compounds initially present in the plastic, i.e., polymer additives, as well as environmentally acquired metals and/or organic contaminants. Plastic particles degrade in the environment via various mechanisms and at different rates depending on the particle size/geometry, polymer type, and the prevailing physical and chemical conditions. The rate and extent of polymer degradation have obvious consequences for the uptake/release kinetics and, thus, the bioavailability of compounds associated with plastic particles. Herein, we develop a theoretical framework to describe the uptake and release kinetics of metal ions and organic compounds by plastic particles and apply it to the analysis of experimental data for pristine and aged micro- and nanoplastics. In particular, we elucidate the contribution of transient processes to the overall kinetics of plastic reactivity toward aquatic contaminants and demonstrate the paramount importance of intraparticulate contaminant diffusion.

Effects of incorporating Mn into goethite on adsorption of dissolved organic matter and potentially toxic elements in soil: Isotherms, kinetics, and mechanisms

Goethite is ubiquitous in the environment and plays key role in preserving dissolved organic matter (DOM) and deactivating potentially toxic elements (PTEs) by adsorbing DOM and PTEs. Various non-Fe metals are usually incorporated into natural goethite, substituting Fe in the goethite structure, which dramatically influence the physico-chemical properties and adsorption behavior of the goethite. In the present study, adsorption of DOM and Pb(II) on Mn-substituted goethite samples was investigated. The results displayed that the specific surface area (SSA) of mineral samples increased by 67.6% as the incorporation of Mn for Fe, from 25.71 m2 g-1 for pure goethite to 43.09 m2 g-1for Mn-goethite. Besides, the Mn substitution caused more hydroxyl groups and relatively fewer positive charges on mineral surface, and Mn in the Mn-goethite samples was predominantly present as Mn(III). The amount of DOM adsorbed to per unit mass of goethite was increased as Mn content increased, which was attributed to Mn incorporation increasing the SSA of mineral samples. However, the SSA-normalized absorption capacity for goethite to DOM was decreased by Mn because Mn substitution decreased the number of positive charges of mineral samples, which weakened the electrostatic attraction between DOM and the minerals. The amount of Pb(II) adsorbed to per unit mass of goethite was increased by Mn substitution, and the amount of Pb(II) adsorbed to per unit SSA of goethite increased as the amount of Mn substitution increased, indicating that the increased capacity for adsorbing Pb was not only caused by the SSA increasing but also by there were more surface hydroxyl groups on the Mn-goethite than pure goethite and Pb(II) preferentially adsorbed to Mn sites on the Mn-goethite. The present study results showed that Mn-goethite could be used to sequester DOM and remediate soil contaminated with PTEs because Mn-goethite has a high adsorption capacity and is environmentally benign.

Effect of microplastics on the binding properties of Pb(ii) onto dissolved organic matter: insights from fluorescence spectra and FTIR combined with two-dimensional correlation spectroscopy

Heavy metal cations are a typical type of inorganic pollutant that has persistent distribution characteristics in aquatic environments and are easily adsorbed on carriers, posing serious threats to ecological safety and human health. Some studies have shown that the coexistence of dissolved organic matter (DOM) and microplastics (MPs) promotes the adsorption of heavy metal cations, but the mechanism of promoting the adsorption process has not been thoroughly studied. In this study, the effect of polystyrene microplastics (PSMPs) on the binding properties of Pb2+ onto humic acid (HA) in aquatic environments was investigated by spectral analysis and two-dimensional correlation (2D-COS) analysis. When PSMPs co-existed with HA, the adsorption capacity of Pb2+ increased. On the one hand, Pb2+ is directly adsorbed on HA through the mechanism of complexation reaction, ion exchange and electrostatic interaction. On the other hand, Pb2+ is first adsorbed on PSMPs by electrostatic action and indirectly adsorbed on HA in the form of PSMPs-Pb2+ owing to the interaction between HA and PSMPs, which increases the adsorption amount of Pb2+ on HA. This study is significant for studying the migration and regression of heavy metal cation contaminants when PSMPs co-exist with DOM in an aqueous environment.

Study on the impact of photoaging on the generation of very small microplastics (MPs) and nanoplastics (NPs) and the wettability of plastic surface

Photoaging is one of the important reasons for the sharp increase of waste plastics, especially microplastics (MPs), in the environment. Therefore, studying the photoaging of plastics is of great significance for controlling plastic pollution from the source. Nevertheless, there are few studies on plastic photoaging from the perspective of polymer structure. Besides, the capacity of different types of plastics to generate MPs with small particle size is relatively little studied. In view of this, we conducted a preliminary study on the capacity of different types of plastics to generate MPs using flow cytometry. We also studied the impact of photoaging on different types of plastics. The results showed that flow cytometry can be used to quantify very small MPs (1-50 μm) and nanoplastics (NPs) (< 1 μm). Furthermore, photoaging often accelerates the generation of MPs and roughens plastic surface. Besides, photoaging can introduce some oxygen-containing groups onto plastic surface, thereby changing the wettability of plastic surface. Moreover, benzene rings in polymer structures may inhibit the generation of MPs but may promote the transformation of the plastic surface from hydrophobic to hydrophilic during photoaging. Although the changes in properties of plastics caused by photoaging have adverse effects on the environment, some new processes and materials still can be developed based on photoaging of plastics. This work contributes to a better understanding of the photoaging of plastics from the perspective of polymer structure, which has certain positive significance for controlling plastic pollution from the source.

Fate and environmental behaviors of microplastics through the lens of free radical

Microplastics (MPs), as plastics with a size of less than 5 mm, are ubiquitously present in the environment and become an increasing environmental concern. The fate and environmental behavior of MPs are significantly influenced by the presence of free radicals. Free radicals can cause surface breakage, chemical release, change in crystallinity and hydrophilicity, and aggregation of MPs. On the other hand, the generation of free radicals with a high concentration and oxidation potential can effectively degrade MPs. There is a limited review article to bridge the fate and environmental behaviors of MP with free radicals and their reactions. This paper reviews the sources, types, detection methods, generation mechanisms, and influencing factors of free radicals affecting the environmental processes of MPs, the environmental effects of MPs controlled by free radicals, and the degradation strategies of MPs based on free radical-associated technologies. Moreover, this review elaborates on the limitations of the current research and provides ideas for future research on the interactions between MPs and free radicals to better explain their environmental impacts and control their risks. This article aims to keep the reader abreast of the latest development in the fate and environmental behaviors of MP with free radicals and their reactions and to bridge free radical chemistry with MP control methodology.

Multilayer adsorption of lead (Pb) and fulvic acid by Chlorella pyrenoidosa: Mechanism and impact of environmental factors

When the multilayer adsorption of lead (Pb) and fulvic acid (FA) occurs on algal surface, the adsorption capacity of Pb on the algae will increase dramatically, thus increasing the environmental risk of Pb. However, the corresponding mechanism and the influence of environmental factors on the multilayer adsorption remain unclear. Here, microscopic observation methods and batch adsorption experiments were exactly designed to investigate the adsorption behavior of multilayer adsorption of Pb and FA on algal surface. The results of Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) revealed that carboxyl groups were the major functional groups responsible for the binding of Pb ions in multilayer adsorption, and its number was more than that in monolayer adsorption. The solution pH, with an optimal pH of 7, was a critical factor influencing the occurrence of multilayer adsorption because it influences the protonation of the involved functional groups and determines the concentration of Pb²⁺ and Pb-FA in the solution. Increasing the temperature was beneficial for multilayer adsorption, with ΔH for Pb and FA varied from +17.12 to +47.68 kJ/mol and +16.19 to +57.74 kJ/mol, respectively. The multilayer adsorption of Pb and FA onto algal surface also followed the pseudo-second order kinetic model, but was extremely slower than the monolayer adsorption of Pb and FA by 30 times and 15 orders of magnitude, respectively. Therefore, the adsorption of Pb and FA in the ternary system had a different adsorption behavior than that in the binary system, which verified the presence of multilayer adsorption of Pb and FA and further support the multilayer adsorption mechanism. This work is important to provide data support for water ecological risk prevention and control of heavy metals.

Plastispheres as hotspots of microbially-driven methylmercury production in paddy soils

Microplastics (MPs) as emerging contaminants have accumulated extensively in agricultural ecosystems and are known to exert important effects on biogeochemical processes. However, how MPs in paddy soils influence the conversion of mercury (Hg) to neurotoxic methylmercury (MeHg) remains poorly understood. Here, we evaluated the effects of MPs on Hg methylation and associated microbial communities in microcosms using two typical paddy soils in China (i.e., yellow and red soils). Results showed that the addition of MPs significantly increased MeHg production in both soils, which could be related to higher Hg methylation potential in the plastisphere than in the bulk soil. We found significant divergences in the community composition of Hg methylators between the plastisphere and the bulk soil. In addition, the plastisphere had higher proportions of Geobacterales in the yellow soil and Methanomicrobia in the red soil compared with the bulk soil, respectively; and plastisphere also had more densely connected microbial groups between non-Hg methylators and Hg methylators. These microbiota in the plastisphere are different from those in the bulk soil, which could partially account for their distinct MeHg production ability. Our findings suggest plastisphere as a unique biotope for MeHg production and provide new insights into the environment risks of MP accumulation in agricultural soils.

Interaction behaviors of sulfamethoxazole and microplastics in marine condition: Focusing on the synergistic effects of salinity and temperature

Microplastics and antibiotics are two common pollutants in the ocean. However, due to changes of salinity and temperature in the ocean, their interaction are significantly different from that of fresh water, and the mechanism remains unclear. Here, the interactions of sulfamethoxazole (SMZ) and microplastics were studied at different temperatures and salinities. The saturation adsorption capacity of SMZ in polypropylene (PP), polyethylene (PE), styrene (PS), polyvinyl chloride (PVC), and synthetic resins (ABS) were highest at the temperature of 20 °C, with 0.118 ± 0.002 mg·g^-1, 0.106 ± 0.004 mg·g^-1, 0.083 ± 0.002 mg·g^-1, 0.062 ± 0.007 mg·g^-1 and 0.056 ± 0.003 mg·g^-1, respectively. The effect of temperature reduction is more significant than temperature rise. The intraparticle diffusion model is appropriate to PP, when film diffusion model suited for PS. The salinity has a more significant effect than temperature on different microplastics, due to the electrostatic adsorption and iron exchange. With the increase in salinity from 0.05% to 3.5%, the adsorption capacity of microplastics on SMZ fell by 53.3 ± 5%, and there was no discernible difference of various microplastics. The hydrogen bond and π-π conjugation of microplastics play an important role in the adsorption of SMZ. These findings further deepen the understanding of the interaction between microplastics and antibiotics in the marine environment.

Adsorption and desorption characteristics of heavy metals onto conventional and biodegradable plastics

Biodegradable plastics have been widely used to replace conventional plastics to minimize environmental impacts of plastic packaging. However, before biodegradable plastics decompose in the environment, they could pose a threat to terrestrial and aquatic creatures by acting as vectors of contaminants in the food chain. In this study, conventional plastic bags (CPBs) made of polyethylene and biodegradable plastic bags (BPBs) made of polylactic acid were examined for their heavy metal adsorption. Effects of solution pHs and temperatures on adsorption reactions were investigated. Because of a larger BET surface area, presence of oxygen-containing function groups, and smaller crystallinity, the heavy metal adsorption capacities of BPBs are significantly larger than those of CPBs. Among Cu (up to 791.48 mg⋅kg^-1), Ni (up to 60.88 mg⋅kg^-1), Pb (up to 1414.58 mg⋅kg^-1), and Zn (up to 295.17 mg⋅kg^-1), Pb and Ni show the largest and the lowest extents of adsorption onto the plastic bags, respectively. In the different waterbodies in nature, Pb adsorption on the CPBs and the BPBs were 318.08-379.91 and 528.41-764.22 mg⋅kg^-1, respectively. Consequently, Pb was selected as the target contaminant in the desorption experiments. After Pb was adsorbed onto the CPBs and the BPBs, Pb could be completely desorbed and released into simulated digestive systems in 10 h. In conclusion, BPBs could be potential vectors of heavy metals, and their suitability as a substitute for CPBs must be thoroughly investigated and confirmed.

Effects of chlorination on microplastics pollution: Physicochemical transformation and chromium adsorption

The large number of microplastics (MPs) that appear in the environment has drawn much attention. Few studies, however, have examined the transformation of MPs in water treatment processes and their effects on environmental pollutants. In this study, the alteration of the physicochemical characteristics of polyethylene and thermoplastic polyurethane upon chlorination, as well as the influence of this alteration on contaminants, were investigated. The findings indicated that microplastics underwent significant morphology and O-functional groups changes during chlorination. It is noteworthy that the mechanisms controlling the chlorination treatment of the two MPs are clearly different. The results of aggregation and adsorption experiments showed that the chlorination treatment enhanced the aggregation ability of the MPs in brine and their interaction with Cr(VI). The present discoveries further suggested that water treatment could alter the migration capacity of microplastics and the distribution of contaminants in the aqueous environment by altering the adsorption of microplastics to the contaminants.

Integrative Evaluation of the Ecological Hazards by Microplastics and Heavy Metals in Wetland Ecosystem

This study was performed to evaluate the impact of microplastics and heavy metals (Pb, Cd, Cr, Cu, Zn, Ni) on sediments, water, aquatic plants (Pistia stratiotes, Alternanthera philoxeroides, and Ipomoea carnea), and fish (Labeo rohita) samples collected from five different sites in the Bajwat wetlands in Sialkot, Pakistan. The concentrations of Pb, Cd, and Cr were above the permissible limits devised by WHO in all the ecosystem components (i.e. sediments, water, plants, and fish) at all sites. The maximum amount of microplastic particles (2317 microplastic particles per kg of sediments) was recorded at Site 1. The filaments were the most commonly found type of microplastics. Plants and fish samples also showed considerable concentration of metals. The multivariate statistical analysis revealed anthropogenic sources of elevated concentrations of metal elements which could cause adverse biological effects in the ecosystem.

Impact of microplastics on lead-contaminated riverine sediments: Based on the enzyme activities, DOM fractions, and bacterial community structure

Microplastics (MPs) are able to interact with diverse contaminants in sediments. However, the impacts of MPs on sediment properties and bacterial community structure in heavy metal-contaminated sediments remain unclear. In this study, we investigated the adsorption of Pb(II) by sediment-MPs mixtures and the effects of different concentration MPs on sediment enzyme activities, DOM fractions, and Pb bioavailability in riverine sediments, and further explored the response of sediment microbial community to Pb in the presence of MPs. The results indicated that the addition of MPs significantly decreased the adsorption amount of Pb(II) by sediments, especially decreased by 12.6% at 10% MPs treatment. Besides, the changes in enzyme activities, DOM fractions exhibited dose-dependent effects of MPs. The higher level of MPs (5% and 10%) tends to transform Pb into more bioavailable fractions in sediments. Also, MPs amendment was observed to alter sediment bacterial community structures, and community differences were evident in the uncontaminated and lead-contaminated sediments. Therein, significant increase of Bacteroidota, Proteobacteria and decrease of Firmicutes abundance in Pb-contaminated sediment at the phylum level were observed. These findings are expected to provide comprehensive information for assessing the combined ecological risks of heavy metals and MPs in riverine sediments.

Soil properties, microbial diversity, and changes in the functionality of saline-alkali soil are driven by microplastics

With the intensification of microplastic (MP) pollution, the impact of MPs on soil ecosystems has garnered considerable attention. We investigated the effects of two commonly used MPs, polyethylene (PE) and polypropylene (PP), at different sizes and doses, on the properties and microbial communities in saline-alkali soil. We found that MP treatment significantly reduced the electrical conductivity but somewhat enhanced the enzyme activities and effective nutrient content of the soil. Microbial diversity is affected by the type, dose, size and interaction of MPs, with fungi being more sensitive than bacteria. Under high-dose PE treatment, the dominant bacteria and fungi enriched, and the diversity indexes declined significantly. Meanwhile, under high-dose PP treatment, several unique bacteria and fungi with low abundance were observed, which eventually increased the diversity indexes. Moreover, PE exerted a stronger effect on bacterial function than PP. High-dose PE treatment suppressed the nitrogen fixation potential of soil bacteria. However, high-dose PP treatment promoted that. In conclusion, our findings showed that PE exerts a stronger negative effect on saline-alkali soil ecosystems than PP. Our findings help bridge the knowledge gap in the impact of MPs on saline-alkaline soils and provide guidance for the rational use of agricultural plastics in saline-alkaline soils.

Microcystin bound on microplastics in eutrophic waters: A potential threat to zooplankton revealed by adsorption-desorption processes

The presence of microplastics (MPs) in eutrophic waters (both freshwaters and coastal waters) is increasingly reported globally, as has the occurrence of cyanotoxins, including microcystins (MCs). MPs have the potential to act as vectors for MCs in freshwater environments, but the transportation mechanisms and associated risks remain poorly understood. In this study, we investigated how aging process and water conditions influenced the adsorption behavior of the microcystin-leucine-arginine (MC-LR) onto polyethylene (PE) and polypropylene (PP). Adsorption kinetics and isotherms showed that the MC-LR sorption capacity in descending order was aged PP > pristine PP > aged PE > pristine PE. The aging process increased the MC-LR sorption amount by 25.1% and 6.5% for PP and PE, respectively. The increase in sorption affinity of aged MPs may be attributed to the significant surface oxidation and the formation of the hydrogen bonding between MPs and MC-LR. Furthermore, MC-LR sorption can be largely influenced by the aqueous conditions. MC-LR preferred to be much adsorbed onto different MPs in brackish water than in freshwater owing to the cation bridging effect and complexation of high levels of cations. The usual alkalescent pH in eutrophic waters did not favor MC-LR sorption to MPs. Finally, based on the desorption results, assuming a worst-case scenario, MC-LR bound on MPs may have a high risk to daphnids. The findings obtained in this study have improved our knowledge in the interaction of MPs with hydrophilic cyanotoxins in aqueous ecosystems, as well as the risks associated with their coexistence.

Investigation of the adsorption-desorption behavior of antibiotics by polybutylene succinate and polypropylene aged in different water conditions

Microplastics (MPs) are widely present in aqueous environments and aged by natural components of complex water environments, such as salinity (SI) and dissolved organic matter (DOM). However, the effects of multicondition aging on the physicochemical properties and environmental behavior of MPs have not been completely investigated. In this study, the degradable MP polybutylene succinate (PBS) was used to investigate the environmental behavior of sulfamethoxazole (SMZ) and was compared with polypropylene (PP). The results showed that the single-factor conditions of DOM and SI, particularly DOM, promoted the aging process of MPs more significantly, especially for PBS. The degrees of MP aging under multiple conditions were lower than those under single-factor conditions. Compared with PP, PBS had greater specific surface area, crystallinity, and hydrophilicity and thus a stronger SMZ adsorption capacity. The adsorption behavior of MPs fitted well with the pseudo-second-order kinetic and Freundlich isotherm models, indicating multilayer adsorption. Compared with PP, PBS showed relatively a higher adsorption capacity, for example, for MPs aged under DOM conditions, the adsorption of SMZ by PBS was up to 5.74 mg/g, whereas that for PP was only 3.41 mg/g. The desorption experiments showed that the desorption amount of SMZ on MPs in the simulated intestinal fluid was greater than that in Milli-Q water. In addition, both the original PBS and the aged PBS had stronger desorption capacities than that of PP. The desorption quantity of PBS was 1.23-1.84 times greater than PP, whereas the desorption rates were not significantly different. This experiment provides a theoretical basis for assessing the ecological risks of degradable MPs in complex water conditions.

Chironomus sp. as a Bioindicator for Assessing Microplastic Contamination and the Heavy Metals Associated with It in the Sediment of Wastewater in Sohag Governorate, Egypt

The consequences of plastic waste pollution have imposed wide global concerns. One of these consequences is the production of micro- and nanosized particles (MNPLs) from aged plastics. The problem of MNPLs is magnified by their potential to transport various contaminants due to their large surface area and other variable physiochemical properties. From this point on, it is important to know the real concentration of MNPLs in our environment and their potential to internalize wild organisms as well as transfer contaminants that are completely highlighted. As a result, our study is the first to detect MP pollution in the upper Egypt wastewater environment. It could be utilized as a baseline to estimate MP wastes and develop management techniques, particularly in Sohag Governorate. The concentration and characterization of MPs in sludge, water, Chironomus sp. larvae, and their tubes were studied in this work. Chironomus sp. is a reliable bioindicator prevalent in such contaminated environments, and it was used to demonstrate how MPs invade biological barriers. Our results found that red and blue polyester fibers are much more prevalent than other polymers, colors, and shapes of MPs. While each dry kilogram of wastewater sludge contains 310 ± 84 particles, this amount is reduced to 1.55 ± 0.7 per liter in the water column. Biologically, the present study succeeded in detecting the MPs inside the wild organism, with concentrations reaching 71 ± 21 and 4.41 ± 1.1 particles per gram wet weight in Chironomus sp. larvae and their tubes (chironomid tubes), respectively. The potential hazard of MPs stems from their propensity to transfer pollutants. At this point, our findings revealed a corresponding and significant concentration of various heavy metals (Cu, Pb, Cd, and Ni) detected in MPs or Chironomus sp. versus sludge. In conclusion, our findings not only proved the presence of MPs in wastewater but also demonstrated their ability to internalize cross-wild organisms, allowing toxins to accumulate inside their bodies, raising concerns about the possible health impacts of plastic pollution.

Adsorption of typical natural organic matter on microplastics in aqueous solution: Kinetics, isotherm, influence factors and mechanism

With rapid urbanization, microplastics and natural organic matters (NOMs) are ubiquitous in aquatic environment, and microplastics could act as carriers for organic matters in the aqueous solution and may pose a potential risk. In this study, the adsorption behaviors and mechanism of typical NOM, humic acid (HA), on polyvinyl chloride (PVC) and polystyrene (PS) microplastics were investigated. Various influence factors such as solution pH, ions species and concentrations, particle size, and coexisting surfactants were studied. The results suggested that HA adsorption onto PVC and PS was low pH-dependent, and ion species and concentrations have a significant impact on the adsorption capacity. In addition, the particle size of PVC and PS microplastics exhibited a significant correlation with HA adsorption, and the adsorption process was influenced by the surfactant species and concentrations. Moreover, the adsorption behaviors of HA in different real water environments were tested, and UV aging exhibited the opposite effects on adsorption capacity of PVC and PS. Furthermore, the adsorption mechanisms of HA onto PVC and PS were explored, indicating halogen bonding, hydrogen bonding, and π-π interaction play important roles in the adsorption process.

Adsorption behavior of UV aged microplastics on the heavy metals Pb(II) and Cu(II) in aqueous solutions

As the "vector" of heavy metals in the aquatic environment, microplastics (MPs) have a great influence on the migration and transformation of heavy metals. In this study, the adsorption of polypropylene (PP), polyethylene (PE) and polystyrene (PS) on two models of heavy metals after UV aging and environmental variables (ionic coexistence, pH, salinity, and fulvic acid) were comprehensively explored on adsorption. The results show that new oxidation functional groups are formed and their hydrophilicity is enhanced after MPs aging. As a result, the adsorption experiments showed that the adsorption of contaminants by UV aged MPs exceeds that of pristine MPs. The adsorption amounts of Pb(II) and Cu(II) by PP, PE and PS increased by 1.45, 1.46, 1.25 and 1.63, 1.39, 1.22 times, respectively. Adsorption kinetic data were more consistent with the pseudo-second-order kinetic model, proving chemisorption to be the mechanism governing the interaction between metal ions and MPs. The Freundlich model could accurately predict the heavy metal adsorption isotherms on MPs, showing that non-homogeneous multilayer adsorption dominates the process. In Pb(II)-Cu(II) binary composite system, metal ion adsorption capacity on MPs is less than that of the single system adsorption capacity, which proves that there is a specific inhibitory effect between coexisting ions. Additionally, external factors like pH, salinity, and fulvic acid content have a big impact on adsorption behavior. According to mechanism analysis, the adsorption process mainly relies on electrostatic interaction, surface complexation, and van der Waals force.

Assessment of microplastics pollution in aquatic species (fish, crab, and snail), water, and sediment from the Buriganga River, Bangladesh: An ecological risk appraisals

Current work focus on microplastic (MPs) occurrence in the water, sediment, and aquatic species (fish, crab, and snail) of the Buriganga River, Bangladesh, with an ecological risk assessment perspective. It also includes the distribution of MPs in different river ecosystem segments and the presence of heavy metal (loid)s (HMs) in water, sediments, and MPs surface. The MPs were inspected by stereomicroscope to identify the shapes, color, and size, and Fourier transform infrared (FTIR) spectroscopy was used to characterize polymer types. The samples concentration of four HMs viz., As, Cd, Cr, and Pb were determined by atomic absorption spectrometry (AAS). The possible MPs content in water, sediment, fish, crab, and snail were varied from 0.250 to 0.117 MPs/mL, 3.5-8.17 MPs/g, 0.65-3.82 MPs/g, 3.75-4.28 MPs/g, and 0.84-1.12 MPs/g, respectively. Fibers and fragments were the most dominant shape, less than 0.5 mm was dominant in size, and blue was the dominant color. In the evaluation of the chemical composition of MPs in water, sediment, fish, snail, and crab samples, Polyethylene terephthalate (PETE), Ethylene-vinyl acetate (EVA), High-density polyethylene (HDPE), Acrylonitrile butadiene styrene (ABS), Cellulose acetate (CA), and Nylon were identified. Regarding HMs load, the river demonstrated a highly polluted environment following the abundance pattern Cr > Pb > As>Cd. SEM-EDAX of MPs was conducted to investigate the surface MP's surface and elemental composition. It reveals that the MPs surface has characteristic flakes, cracks, and adhering particles along with Si, K, Au, C, and O on the surface studied MPs. There is no significant relationship found among the ecosystem segments. However, Ompok bimaculatus species show a negative relationship of MPs distribution with water and sediment. Moreover, according to the ecological risk of MPs pollution in the Buriganga River, it was in category-I, indicating considerable pollution load due to the presence of MPs.

New insights into the adsorption behavior of thiacloprid at the microfibers/water interface: Role of humic acid

Dissolved organic matter regulates the interaction between microplastics (MPs) and organic pollutants. Here, this paper investigated the effect and mechanism of humic acid (HA) on the adsorption behavior of thiacloprid at two microfibers (MFs)/water interface, and compared the differences in the performance of MFs and pure MPs. The results showed that 10 mg L^-1 HA decreased the adsorption capacity and the partition coefficient K_D of thiacloprid on MFs and pure MPs. Spectral analysis showed that HA could form hydrogen bonds and van der Waals forces with both MPs and thiacloprid, ultimately affecting the adsorption behavior of thiacloprid at MPs/water interface via competitive adsorption and bridging effect. Furthermore, two-dimensional correlation spectroscopy demonstrated that thiacloprid was preferentially adsorbed onto MPs compared with HA. Finally, density functional theory calculation demonstrated that phenolic-OH, -COOH, and alcoholic-OH played critical roles in competing adsorption and bridging effect. This study offers a theoretical foundation for a better comprehension of the adsorption behavior of organic pollutants at the MPs/water interface.

Polyamide microplastics as better environmental vectors of Cr(VI) in comparison to polyethylene and polypropylene microplastics

The adsorption, desorption, and their influence factors of Cr(VI) by microplastics (MPs) in the solution was investigated in this study. The results demonstrated that UV aging promoted adsorption, while the increase of salinity and natural organic matter (NOM) inhibited adsorption. The particle size affected the total Cr(VI) active adsorption sites on MPs, while the pH changed the electrostatic force. The Cr(VI) adsorption by MPs conformed to the pseudo-first and pseudo-second order kinetic models, and was monolayer and inhomogeneous. SEM-EDS, XPS and ATR-FTIR analyses demonstrated that the physical adsorption dominated the adsorption process. Especially, the highest adsorption capacity of Cr(VI) by polyamide (PA) MPs was attributed to their hydrophilic amide groups. However, Cr(VI) was only released from PA MPs, of which desorption rate followed the sequence of seawater (79.5 %) > fresh water (66.6 %) > deionized water (34.8 %). Thus, PA MPs might be non-negligible environmental vectors for the transport of Cr(VI).