Iron-entrapped niosomes and their potential application for yogurt fortification

How the designed processing parameters affect the liquid mixture density and viscosity of the tretinoin-loaded niosomes at different temperatures?

The current study was conducted to present novel thermophysical data on tretinoin-loaded niosomes paired with a combination of span 60 and tween 80. Measurements were carried out to analyze the liquid mixture density and viscosity of the mentioned multilayered structures for the first time, with consideration given to the diverse molecular weights of surfactants and various stabilizers at different temperatures. Through the application of equations of state, this study has the ability to set the stage for thermodynamic modeling of solutions that involve niosomes, presenting a promising avenue for further research. So, tretinoin-loaded formulations were prepared by investigating the effects of different co-surfactants, including cholesterol or dodecanol, as well as the impact of surfactant molecular weight limited to 650.525-1090.175 g mol-1. This novel investigation was conducted to assess the superior stabilizing capabilities of dodecanol in comparison to cholesterol, with a specific emphasis on optimized vesicle size, highest incorporation efficiency, and lowest zeta potential. In particulars, the response surface methodology (RSM) was applied to optimize the operative factors and the number of experiments. The experimental evidence clearly indicates that the use of dodecanol in the manufacturing process significantly improves the stability of niosomes, while the inclusion of cholesterol leads to higher liquid mixture density and viscosity in the prepared niosomes.

Effect of cooking conditions on iron release from pots and development of kinetic models for iron supplementation in NIPs

The World Health Organization (WHO) has identified the use of iron cookware as a potential strategy for alleviating iron deficiency anaemia (IDA) and emphasises the need for action-oriented research in this area. In response to this need, our study systematically investigated the patterns of iron release from various types of cookware under different cooking conditions. Among these, nitrided iron pots (NIPs), the most widely used cookware, were selected for the development of kinetic models to predict iron release efficiently across a range of cooking temperatures and pH levels in food materials. Our results demonstrated that iron release from the pots was significantly influenced by cooking conditions such as the type of cookware, cooking temperatures, cooking times, types of acidic substances, and the pH of the cooking environment. Specifically, higher temperatures, longer cooking times, lower pH levels, and the presence of acetic acid were found to maximise iron release into food. We developed a series of kinetic models-Iron Release-Temperature Models (I, II, and III) and Iron Release-pH Models (IV, V, and VI)-to predict iron release from NIPs. The temperature models are applicable for cooking food with a pH of 5.00-6.00 within a temperature range of 50-100 °C, while the pH models are designed for food with a pH of 3.00-6.00 at boiling temperatures. Validation experiments confirmed the relative accuracy of these models. Additionally, when comparing the predicted iron release with the Recommended Nutrient Intake (RNI) guidelines, the findings support the efficacy of iron pots as a viable method for iron supplementation.

Enrichment of a fruit-based smoothie beverage with omega-3 fatty acids from microencapsulated chia seed oil

BACKGROUND

Omega-3 fatty acids are known for their various health benefits. Chia is the richest vegetable source of omega-3 fatty acids. However, its oil is highly susceptible to oxidative deterioration and should be protected for incorporation into food matrices. This work aimed to study the incorporation of different chia oil microcapsules in a powdered beverage, analyzing the effect on the physicochemical characteristics and stability during storage.

RESULTS

Different types of microcapsules were obtained: monolayer microcapsules using sodium caseinate and lactose as wall material, and multilayer microcapsules produced through electrostatic deposition using lecithins, chitosan, and chia mucilage as the first, second, and third layers, respectively. The results demonstrated an efficient enrichment of smoothies, with omega-3 fatty acid values ranging from 24.09% to 42.73%, while the original food matrix powder lacked this component. These powder beverages exhibited low moisture content (≤ 2.91%) and low water activity (≤ 0.39). The aerated, packed density and compressibility assays indicated that adding microcapsules made the powders less dense and compressible. The color of the original powdered beverage was not modified. The dispersibility reflected an acceptable instantaneity, reaching the maximum obscuration after 30 s of stirring. The solubility of all the enriched products was higher than 70%, whereas the pH was ~6.8. The contact angle between the powder and liquid indicated an excellent ability to be reconstituted in water. The analysis of the glass transition temperature showed that the storage temperature (25 °C) was adequate. The peroxide value of all the products was low throughout the storage (≤ 1.63 meq peroxide kg-1 of oil at 90 days at 25 ± 2 °C), thus maintaining the quality of the microencapsulated chia oil.

CONCLUSIONS

The results suggest that incorporating the monolayer and multilayer chia oil microcapsules that were studied could be a viable strategy for enriching smoothies with the omega-3 fatty acids present in chia seed oil. © 2023 Society of Chemical Industry.

Plant-Based Oil-in-Water Food Emulsions: Exploring the Influence of Different Formulations on Their Physicochemical Properties

The global focus on incorporating natural ingredients into the diet for health improvement encompasses ω-3 polyunsaturated fatty acids (PUFAs) derived from plant sources, such as flaxseed oil. ω-3 PUFAs are susceptible to oxidation, but oil-in-water (O/W) emulsions can serve to protect PUFAs from this phenomenon. This study aimed to create O/W emulsions using flaxseed oil and either soy lecithin or Quillaja saponins, thickened with modified starch, while assessing their physical properties (oil droplet size, ζ-potential, and rheology) and physical stability. Emulsions with different oil concentrations (25% and 30% w/w) and oil-to-surfactant ratio (5:1 and 10:1) were fabricated using high-pressure homogenization (800 bar, five cycles). Moreover, emulsions were thickened with modified starch and their rheological properties were measured. The physical stability of all emulsions was assessed over a 7-day storage period using the TSI (Turbiscan Stability Index). Saponin-stabilized emulsions exhibited smaller droplet diameters (0.11-0.19 µm) compared to lecithin (0.40-1.30 µm), and an increase in surfactant concentration led to a reduction in droplet diameter. Both surfactants generated droplets with a high negative charge (-63 to -72 mV), but lecithin-stabilized emulsions showed greater negative charge, resulting in more intense electrostatic repulsion. Saponin-stabilized emulsions showed higher apparent viscosity (3.9-11.6 mPa·s) when compared to lecithin-stabilized ones (1.19-4.36 mPa·s). The addition of starch significantly increased the apparent viscosity of saponin-stabilized emulsions, rising from 11.6 mPa s to 2117 mPa s. Emulsions stabilized by saponin exhibited higher stability than those stabilized by lecithin. This study confirms that plant-based ingredients, particularly saponins and lecithin, effectively produce stable O/W emulsions with flaxseed oil, offering opportunities for creating natural ingredient-based food emulsions.

Factors affecting iron absorption and the role of fortification in enhancing iron levels

Iron is an important micronutrient required for a number of biological processes including oxygen transport, cellular respiration, the synthesis of nucleic acids and the activity of key enzymes. The World Health Organization has recognised iron deficiency as the most common nutritional deficiency globally and as a major determinant of anaemia. Iron deficiency anaemia affects 40% of all children between the ages of 6 and 59 months, 37% of mothers who are pregnant and 30% of women between the ages of 15 and 49 years worldwide. Dietary iron exists in two main forms known as haem iron and non-haem iron. Haem iron is obtained from animal sources such as meat and shows higher bioavailability than non-haem iron, which can be obtained from both plant and animal sources. Different components in food can enhance or inhibit iron absorption from the diet. Components such as meat proteins and organic acids increase iron absorption, while phytate, calcium and polyphenols reduce iron absorption. Iron levels in the body are tightly regulated since both iron overload and iron deficiency can exert harmful effects on human health. Iron is stored mainly as haemoglobin and as iron bound to proteins such as ferritin and hemosiderin. Iron deficiency affects individuals at increased risk due to factors such as age, pregnancy, menstruation and various diseases. Different solutions for iron deficiency are applied at individual and community levels. Iron supplements and intravenous iron can be used to treat individuals with iron deficiency, while various types of iron-fortified foods and biofortified crops can be employed for larger communities. Foods such as rice, flour and biscuits have been used to prepare fortified iron products. However, it is important to ensure the fortification process does not exert significant negative effects on organoleptic properties and the shelf life of the food product.

Characterization of withanolides and bacoside A-loaded proniosomes: effect on oxidative stress and survival under hypergravity in rodent model

OBJECTIVE

This work provides characterization of withanolides and bacoside A proniosomes, and evaluating their potency in rat model for combating oxidative stress-induced blood-brain barrier (BBB) damage and their survival under hypergravity.

SIGNIFICANCE

The delivery system was aimed for sustained drug release in plasma and brain, which could improve their efficiency and provide a therapeutic approach to combat oxidative damage and restore BBB integrity.

METHODS

Proniosomes were prepared using withanolides extracted from the roots of W. somnifera and bacoside A derived from the leaf extract of B. monnieri by thin film hydration technique. In vitro release of withanolides and bacoside A from the proniosomes was studied. In vivo experiments were conducted in Wistar Albino rat model to evaluate the efficacy of drug-loaded proniosomes in improving the antioxidant activity in plasma and brain, restoring BBB integrity and combating hypergravity conditions.

RESULTS

The withanolides and bacoside A-loaded proniosomes showed slow and sustained release of just 62.0 ± 2.87 and 62.9 ± 3.41%, respectively, in 9 h period against the release of 98-99% for the extracts that served as control. Trials conducted in vivo revealed a significant (p < .05) increase in the activity of antioxidant enzymes in both plasma and brain. Also, minimal extravasation of Evans blue dye into the brain (15 ± 0.03 and 16 ± 0.03 ng/g in treated groups against 110 ± 0.01 ng/g in control) of the rats fed with drug-loaded proniosomes was indicative of minimal damage to BBB. Rats fed with drug-loaded proniosomes survived to the extent of 75-83.3% against simulated hypergravity as compared to the control group in which only 50% survived.

CONCLUSION

Proniosomes provided sustained release of drugs, which helped to protect BBB integrity, thereby combating hypergravity.

Biogenic engineered nanomaterials for enhancing bioavailability via developing nano-iron-fortified smart foods: advances, insight, and prospects of nanobionics in fortification of food

Iron deficiency is a significant cause of iron deficiency anemia (IDA). Treatment of IDA is challenging due to several challenges, including low target bioavailability, low palatability, poor pharmacokinetics, and extended therapeutic regimes. Nanotechnology holds the promise of revolutionizing the management and treatment of IDA. Smart biogenic engineered nanomaterials (BENMs) such as lipids, protein, carbohydrates, and complex nanomaterials have been the subject of extensive research and opened new avenues for people and the planet due to their enhanced physicochemical, rheological, optoelectronic, thermomechanical, biological, magnetic, and nutritional properties. Additionally, they show eco-sustainability, low biotoxicity, active targeting, enhanced permeation and retention, and stimuli-responsive characteristics. We examine the opportunities offered by emerging smart BENMs for the treatment of iron deficiency anemia by utilizing iron-fortified smart foods. We review the progress made so far and other future directions to maximize the impact of smart nanofortification on the global population. The toxicity effects are also discussed with commercialization challenges.

Microfluidics potential for developing food-grade microstructures through emulsification processes and their application

The food sector continues to face challenges in developing techniques to increase the bioavailability of bioactive chemicals. Utilising microstructures capable of encapsulating diverse compounds has been proposed as a technological solution for their transport both in food and into the gastrointestinal tract. The present review discusses the primary elements that influence the emulsification process in microfluidic systems to form different microstructures for food applications. In microfluidic systems, reactions occur within small reaction channels (1-1000 μm), using small amounts of samples and reactants, ca. 102-103 times less than conventional assays. This geometry provides several advantages for emulsion and encapsulating structure production, like less waste generation, lower cost and gentle assays. Also, from a food application perspective, it allows the decrease in particle dispersion, resulting in a highly repeatable and efficient synthesis method that also improves the palatability of the food products into which the encapsulates are incorporated. However, it also entails some particular requirements. It is important to obtain a low Reynolds number (Re < approx. 250) for greater precision in droplet formation. Also, microfluidics requires fluid viscosity typically between 0.3 and 1400 mPa s at 20 °C. So, it is a challenge to find food-grade fluids that can operate at the micro-scale of these systems. Microfluidic systems can be used to synthesise different food-grade microstructures: microemulsions, solid lipid microparticles, microgels, or self-assembled structures like liposomes, niosomes, or polymersomes. Besides, microfluidics is particularly useful for accurately encapsulating bacterial cells to control their delivery and release on the action site. However, despite the significant advancement in these systems' development over the past several years, developing and implementing these systems on an industrial scale remains challenging for the food industry.

From Grape By-Products to Enriched Yogurt Containing Pomace Extract Loaded in Nanotechnological Nutriosomes Tailored for Promoting Gastro-Intestinal Wellness

Grape pomace is the main by-product generated during the winemaking process; since it is still rich in bioactive molecules, especially phenolic compounds with high antioxidant power, its transformation in beneficial and health-promoting foods is an innovative challenge to extend the grape life cycle. Hence, in this work, the phytochemicals still contained in the grape pomace were recovered by an enhanced ultrasound assisted extraction. The extract was incorporated in liposomes prepared with soy lecithin and in nutriosomes obtained combining soy lecithin and Nutriose FM06^®, which were further enriched with gelatin (gelatin-liposomes and gelatin-nutriosomes) to increase the samples' stability in modulated pH values, as they were designed for yogurt fortification. The vesicles were sized ~100 nm, homogeneously dispersed (polydispersity index < 0.2) and maintained their characteristics when dispersed in fluids at different pH values (6.75, 1.20 and 7.00), simulating salivary, gastric and intestinal environments. The extract loaded vesicles were biocompatible and effectively protected Caco-2 cells against oxidative stress caused by hydrogen peroxide, to a better extent than the free extract in dispersion. The structural integrity of gelatin-nutriosomes, after dilution with milk whey was confirmed, and the addition of vesicles to the yogurt did not modify its appearance. The results pointed out the promising suitability of vesicles loading the phytocomplex obtained from the grape by-product to enrich the yogurt, offering a new and easy strategy for healthy and nutritional food development.

Fortifying jelly foods with microencapsulated anti-anaemic compounds, ferrous gluconate, ascorbic acid and folic acid

Low ferrous iron bioavailability presents a challenge for food fortification programmes. In this study, jelly foods were fortified with spray-dried chitosan microparticles that had been loaded with ferrous gluconate (FeG) and folic acid (FA) to alleviate iron deficiency anaemia and FA deficiency anaemia, respectively. The presence of FA and ascorbic acid (AA) increased the in vitro iron bioavailability of the FeG-AA-FA microparticles up to sixfold. Furthermore, the iron bioavailability of the fortified jelly foods increased more than 5 folds compared to that of the FeG-AA-FA microparticles. The use of lower temperature during the preparation of fortified jelly foods is recommended to avoid the microparticles' decomposition and a Maillard browning reaction. These findings can help food technologists and product developers select formulations with higher ferrous bioavailability to reduce the prevalence of anaemia.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05599-7.

Nano-vesicular carriers for bioactive compounds and their applications in food formulations

The most commonly used vesicular systems in the food industry include liposomes, niosomes, phytosomes, or transfersomes. This review focuses on showing how nano-vesicular carriers (NVCs) amend the properties of bioactive compounds (bioactives), making them suitable for food applications, especially functional foods. In this research, we elaborate on the question of whether bioactive-loaded NVCs affect various food aspects such as their antioxidant capacity, or sensory properties. This review also shows how NVCs improve the long-term release profile of bioactives during storage and at different pH values. Besides, the refinement of digestibility and bioaccessibility of diverse bioactives through NVCs in the gastrointestinal tract is elucidated. NVCs allow for stable vesicle formation (e.g. from anthocyanins) which reduces their cytotoxicity and proliferation of cancer cells, prolongs the release bioactives (e.g. d-limonene) with no critical burst, reduces the biofilm formation capacity of both Gram-positive/negative strains and their biofilm gene expression is down-regulated (in the case of tannic acid), low oxidation (e.g. iron) is endured when exposed to simulated gastric fluid, and unpleasant smell and taste are masked (in case of omega-3 fatty acids). After the incorporation of bioactive-loaded NVCs into food products, their antioxidant capacity is enhanced, maintaining high encapsulation efficiency and enduring pasteurization conditions, and they are not distinguished from control samples in sensory evaluation despite the reverse situation about free bioactives.

Physicochemical properties of kashk supplemented with encapsulated lemongrass extract

Kashk is a perishable fermented dairy product. Since chemical preservatives are harmful for human health, we aimed to study lemongrass (Cymbopogon citratus L.) as a natural preservative. First, we assessed the phytochemical properties of lemongrass extract. Then, we added lemongrass extract and microencapsulated lemongrass extract to kashk samples. Finally, we analyzed their physicochemical and sensorial properties during 60 days of storage. Catechin (419.04 ± 0.07 mg/L), gallic acid (319.67 ± 0.03 mg/L), and chloregenic acid (4.190 ± 0.002 mg/L) were found to be the predominant phenolic constituents in lemongrass. Total phenolics, total flavonoids, and antioxidant activity (IC50) values of the lemongrass extract were 26.73 mg GA/g, 8.06 mg Quercetin/g, and 2751.331 mg/L, respectively. The beads were spherical in shape with a 35.03-nm average particle diameter and 47.81% microencapsulation efficiency. The pH of the supplemented kashks decreased during the storage time. They showed lower acid degree values than the control at the end of storage. The peroxide, p-anisidine, and thiobarbituric acid values of the sample fortified with microencapsulated lemongrass extract were 6.15, 4.76, and 44.12%, respectively, being the lowest among the samples. This kashk sample had the highest hardness (570.62 ± 21.87 g), adhesiveness (18.10 ± 4.36 mJ), and cohesiveness (0.56 ± 0.25) but the lowest chewiness (72.66 ± 3.08 mJ) among the samples. It also had a better sensory profile than the control samples. Our results indicated that microencapsulated lemongrass extract could be incorporated into kashk to ensure suitable sensorial and textural properties. Furthermore, it may delay fat oxidation and lipolysis during storage.

Green tea catechin loaded niosomes: formulation and their characterization for food fortification

The main aim of this study was to deliver green tea catechins with enhanced bioavailability using niosomal system. Catechins-loaded niosomes were prepared using food grade surfactant, Tween 60 and membrane stabilizers namely, lauryl alcohol, cetyl alcohol and cholesterol by thin film hydration technique. Catechins-loaded niosomes exhibited a hydrodynamic diameter of 58.48 nm with a narrow size distribution (PDI = 0.13) and zeta potential of - 31.75 mV, suggestive for homogeneity and good stability. Niosomes entrapped about 85.82% of catechin and showed sustained release under simulated GI conditions. Morphology of niosomal vesicles were carried out using scanning electron microscopy-energy X-ray dispersion spectroscopy, transmission electron microscopy and atomic force microscopy. Fourier-transform infrared spectroscopy and High-performance liquid chromatography analysis confirmed successful encapsulation of catechins. Antioxidant activity of catechins was retained in the niosomal form. Fortification of milk with catechins loaded niosomes showed no significant changes on sensory, physicochemical properties and exhibited higher antioxidant property.

Iron delivery systems for controlled release of iron and enhancement of iron absorption and bioavailability

Iron deficiency is a global nutritional problem, and adding iron salts directly to food will have certain side effects on the human body. Therefore, there is growing interest in food-grade iron delivery systems. This review provides an overview of iron delivery systems, with emphasis on the controlled release of iron during gastrointestinal digestion, as well as the enhancement of iron absorption and bioavailability. Iron-bearing proteins are easily degraded by digestive enzymes and absorbed through receptor-mediated endocytosis. Instead, protein aggregates are slowly degraded in the stomach, which delays iron release and serves as a potential iron supplement. Amino acids, peptides and polysaccharides can bind iron through iron binding sites, but the formed compounds are prone to dissociation in the stomach. Moreover, peptides and polysaccharides can deliver iron by mediating the formation of ferric oxyhydroxide which is absorbed through endocytosis or bivalent transporter 1. In addition, liposomes are unstable during gastric digestion and iron is released in large quantities. Complexes formed by polysaccharides and proteins, and microcapsules formed by polysaccharides can delay the release of iron in the gastric environment and prolong iron release in the intestinal environment. This review is conducive to the development of iron functional ingredients and dietary supplements.

Addition of Trans-Resveratrol-Loaded Highly Concentrated Double Emulsion to Yoghurts: Effect on Physicochemical Properties

Trans-resveratrol (RSV) needs to be encapsulated to maintain its beneficial properties on the human body. This is due to its extreme photosensitivity, short biological half-life, and easy oxidation. In this study, the use of double emulsions for RSV encapsulation and their further application on functional yoghurts was studied. Different types of yoghurts were prepared: with and without RSV and with two types of volumetric emulsion formulations (20/80 and 30/70). In order to study the influence of the addition of double emulsions to the physical properties of the prepared yoghurts, they were characterised fresh and after a month under storage at 4 °C, in terms of droplet size, morphology, stability, rheology, texturometry, colorimetry, and antioxidant capacity. Results obtained showed that the presence of emulsion in the yoghurts produced a generalised decrease in the predominant droplet size (from 48 µm to 15-25 µm) and an increase in the stability. Additionally, a predominantly elastic character was observed. The firmness values obtained were very similar for all the yoghurts analysed and did not suffer important modifications with time. A slight colour variation was observed with storage time in the control sample, whereas a more notable variation in the case of emulsion yoghurts was observed. An appreciable increase of the antioxidant capacity of the final functional yoghurt (100 g) was observed when it contained 5-8 mg of RSV. Encapsulated RSV added to yoghurts presented a larger protection against RSV oxidation compared with free RSV, presenting a larger antioxidant inhibition after one month of storage. Moreover, the antioxidant capacity of yoghurts with encapsulated RSV was not affected under storage, since slight reductions (3%) were registered after one month of storage at 4 °C.

Microencapsulation of Bioactive Ingredients for Their Delivery into Fermented Milk Products: A Review

The popularity and consumption of fermented milk products are growing. On the other hand, consumers are interested in health-promoting and functional foods. Fermented milk products are an excellent matrix for the incorporation of bioactive ingredients, making them functional foods. To overcome the instability or low solubility of many bioactive ingredients under various environmental conditions, the encapsulation approach was developed. This review analyzes the fortification of three fermented milk products, i.e., yogurt, cheese, and kefir with bioactive ingredients. The encapsulation methods and techniques alongside the encapsulant materials for carotenoids, phenolic compounds, omega-3, probiotics, and other micronutrients are discussed. The effect of encapsulation on the properties of bioactive ingredients themselves and on textural and sensory properties of fermented milk products is also presented.

Encapsulated Food Products as a Strategy to Strengthen Immunity Against COVID-19

In December 2019, the severe acute respiratory syndrome-related coronavirus 2 (SARS-CoV-2)-a novel coronavirus was identified which was quickly distributed to more than 100 countries around the world. There are currently no approved treatments available but only a few preventive measures are available. Among them, maintaining strong immunity through the intake of functional foods is a sustainable solution to resist the virus attack. For this, bioactive compounds (BACs) are delivered safely inside the body through encapsulated food items. Encapsulated food products have benefits such as high stability and bioavailability, sustained release of functional compounds; inhibit the undesired interaction, and high antimicrobial and antioxidant activity. Several BACs such as ω-3 fatty acid, curcumin, vitamins, essential oils, antimicrobials, and probiotic bacteria can be encapsulated which exhibit immunological activity through different mechanisms. These encapsulated compounds can be recommended for use by various researchers, scientists, and industrial peoples to develop functional foods that can improve immunity to withstand the coronavirus disease 2019 (COVID-19) outbreak in the future. Encapsulated BACs, upon incorporation into food, offer increased functionality and facilitate their potential use as an immunity booster. This review paper aims to target various encapsulated food products and their role in improving the immunity system. The bioactive components like antioxidants, minerals, vitamins, polyphenols, omega (ω)-3 fatty acids, lycopene, probiotics, etc. which boost the immunity and may be a potential measure to prevent COVID-19 outbreak were comprehensively discussed. This article also highlights the potential mechanisms; a BAC undergoes, to improve the immune system.

Iron supplementation and iron-fortified foods: a review

About one-third of the world population is suffering from iron deficiency. Delivery of iron through diet is a practical, economical, and sustainable approach. Clinical studies have shown that the consumption of iron-fortified foods is one of the most effective methods for the prevention of iron deficiency. However, supplementing iron through diet can cause undesirable side-effects. Thus, it is essential to develop new iron-rich ingredients, iron-fortified products with high bioavailability, better stability, and lower cost. It is also essential to develop newer processing technologies for more effective fortification. This review compared the iron supplementation strategies used to treat the highly iron-deficient population and the general public. We also reviewed the efficacy of functional (iron-rich) ingredients that can be incorporated into food materials to produce iron-fortified foods. The most commonly available foods, such as cereals, bakery products, dairy products, beverages, and condiments are still the best vehicles for iron fortification and delivery.Scope of reviewThe manuscript aims at providing a comprehensive review of the latest publications that cover three aspects: administration routes for iron supplementation, iron-rich ingredients used for iron supplementation, and iron-fortified foods.

Lipid vesicles: applications, principal components and methods used in their formulations: A review

Liposomes and niosomes are currently the most studied lipid vesicles in the nanomedicine field. The system formed by a phospholipid bilayer in aqueous medium allows these vesicles to carry both hydrophilic and lipophilic compounds, providing an increase in solubility of drugs lready used in conventional therapy. The focus on the development of these vesicles should be directed to determining the ideal composition, with low toxicity, biocompatibility and which remains stable for long periods. These characteristics are related to the components used for formulation and the substances that will be encapsulated. Another important point relates to the methods used during formulation, which are important in determining the type of vesicle formed, whether these be large or small, unilamellar or multilamellar. Because of the deliberate actions applied in the development of these vesicles, this review sought to gather updated information regarding the different methods used, including their main components while considering the behavior of each of them when used in different formulations. Also, data showing the importance of formulations in the medical field evidencing studies performed with liposome and niosome vesicles as promising in this area, and others, were included. The approach allows a better understanding of the participation of components in formulations such as cholesterol and non-ionic surfactants, as well as the basis for choosing the ideal components and methods for future research in the development of these vesicles.

Cyclic Voltammetry and Oxidation Rate Studies of Ferrous Gluconate Complex Solutions for Preparation of Chitosan-Tripolyphosphate Microparticles

A proper understanding of the properties of iron could increase the effectiveness of programmes for alleviating iron deficiency. Recently, encapsulation has been considered an appropriate method for protecting iron from injurious reactions. However, several events may occur during encapsulation processes, including changes in the iron’s oxidation state. Oxidation of ferrous iron is not desirable since the intestines can only absorb iron in the ferrous form. In this study, a cyclic voltammetry method was applied to investigate the likelihood of ferrous gluconate oxidation for the preparation of chitosan-tripolyphosphate microparticles. Then, the electrochemical properties of ferrous gluconate were confirmed experimentally. The oxidation rate of ferrous gluconate is also discussed in this paper. All the experimental solutions were formulated in detail to produce conditions similar to those of microparticle production. Cyclic voltammetry analysis was conducted using a configuration of three electrodes connected to an electrochemical analyser. Graphite, platinum wire, and Ag/AgCl were employed as the auxiliary, working, and reference electrodes, respectively. The cyclic voltammetry results show that the observed potential for each anodic peak shifted negatively in the presence of chitosan and sodium tripolyphosphate. Moreover, the rate of ferrous oxidation tended to increase during 75 min of experiments due to the presence of chitosan and sodium tripolyphosphate. These behaviours indicate the transformation of ferrous iron to ferric iron during iron microparticle preparation. Furthermore, these findings suggest that spray drying is a preferable method to minimise the oxidation reaction.

Effect of drug molecular weight on niosomes size and encapsulation efficiency

Encapsulation into nanocarriers, such as niosomes, is a promising way to protect them from degradation, and allow controll and target delivery of bioactive compounds. For biotechnological applications, a tight control of particle size with acceptable encapsulation efficiencies (EE) is a technological challenge, especially for hydrophilic compounds due to its capability to diffuse across biological barriers. Niosomes formulated with mixture of surfactants represent promising nanocarriers due to the advantages of non-ionic surfactants, such as low cost, versatility and enhanced physico-chemical properties. In this work, the effect of both, composition of the hydrating solution and molecular weight of the loaded compound, on the particle size and EE of niosomes prepared by using the thin film hydration method was studied. Particularly, mili-Q water, glycerol solution and PEG-400 solution were tested for niosomes formulated with Span®80-Tween®80 with/without dodecanol as membrane stabilizer. It was found that particle size highly depends on hydration media composition and an interaction with compound MW could exist. Larger vesicles results in an increase in EE, which could be purely related with physical aspects such as vesicle loading volume capacity. The effect of hydration solution composition could be related with their ability to change the bilayer packing and physical properties, as observed by differential scanning calorimetry. Finally, it was possible to compare the suitability of dialysis and gel filtration as purification methods, demonstrating that gel filtration is not an adequate purification method when viscous solutions are used, since they could affect the particle vesicles retention and hence EE measurements would be misrepresentative.

Recent advances in non-ionic surfactant vesicles (niosomes): Fabrication, characterization, pharmaceutical and cosmetic applications

Development of nanocarriers for drug delivery has received considerable attention due to their potential in achieving targeted delivery to the diseased site while sparing the surrounding healthy tissue. Safe and efficient drug delivery has always been a challenge in medicine. During the last decade, a large amount of interest has been drawn on the fabrication of surfactant-based vesicles to improve drug delivery. Niosomes are self-assembled vesicular nano-carriers formed by hydration of non-ionic surfactant, cholesterol or other amphiphilic molecules that serve as a versatile drug delivery system with a variety of applications ranging from dermal delivery to brain-targeted delivery. A large number of research articles have been published reporting their fabrication methods and applications in pharmaceutical and cosmetic fields. Niosomes have the same advantages as liposomes, such as the ability to incorporate both hydrophilic and lipophilic compounds. Besides, niosomes can be fabricated with simple methods, require less production cost and are stable over an extended period, thus overcoming the major drawbacks of liposomes. This review provides a comprehensive summary of niosomal research to date, it provides a detailed overview of the formulation components, types of niosomes, effects of components on the formation of niosomes, fabrication and purification methods, physical characterization techniques of niosomes, recent applications in pharmaceutical field such as in oral, ocular, topical, pulmonary, parental and transmucosal drug delivery, and cosmetic applications. Finally, limitations and the future outlook for this delivery system have also been discussed.

Strategies to Encapsulate the Staphylococcus aureus Bacteriophage phiIPLA-RODI

The antimicrobial properties of bacteriophages make them suitable food biopreservatives. However, such applications require the development of strategies that ensure stability of the phage particles during food processing. In this study, we assess the protective effect of encapsulation of the Staphylococcus aureus bacteriophage phiIPLA-RODI in three kinds of nanovesicles (niosomes, liposomes, and transfersomes). All these systems allowed the successful encapsulation of phage phiIPLA-RODI with an efficiency ranged between 62% and 98%, regardless of the concentration of components (like phospholipids and surfactants) used for vesicle formation. Only niosomes containing 30 mg/mL of surfactants exhibited a slightly lower percentage of encapsulation. Regarding particle size distribution, the values determined for niosomes, liposomes, and transfersomes were 0.82 ± 0.09 µm, 1.66 ± 0.21 µm, and 0.55 ± 0.06 µm, respectively. Importantly, bacteriophage infectivity was maintained during storage for 6 months at 4 °C for all three types of nanovesicles, with the exception of liposomes containing a low concentration of components. In addition, we observed that niosomes partially protected the phage particles from low pH. Thus, while free phiIPLA-RODI was not detectable after 60 min of incubation at pH 4.5, titer of phage encapsulated in niosomes decreased only 2 log units. Overall, our results show that encapsulation represents an appropriate procedure to improve stability and, consequently, antimicrobial efficacy of phages for application in the food processing industry.

Effects of storage and yogurt matrix on the stability of tocotrienols encapsulated in chitosan-alginate microcapsules

Tocotrienol microcapsules (TM) were formed by firstly preparing Pickering emulsion containing tocotrienols, which was then gelled into microcapsules using alginate and chitosan. In this study, we examined the stability of TM during storage and when applied into a model food system, i.e. yogurt. During storage at 40°C, TM displayed remarkably lower tocotrienols loss (50.8%) as compared to non-encapsulated tocotrienols in bulk oil (87.5%). When the tocotrienols were incorporated into yogurt, the TM and bulk oil forms showed a loss of 23.5% and 81.0%, respectively. Generally, the tocotrienols were stable in the TM form and showed highest stability when these TM were added into yogurt. δ-Tocotrienol was the most stable isomer in both forms during storage and when incorporated into yogurt. The addition of TM into yogurt caused minimal changes in the yogurt's color and texture but slightly altered the yogurt's viscosity.