Recent developments in nanocellulose-based biodegradable polymers, thermoplastic polymers, and porous nanocomposites

"Reservoir-law" synergistic reinforcement of electrostatic spun polylactic acid composites with cellulose nanocrystals and 2-hydroxypropyl-β-cyclodextrin for intelligent bioactive food packaging

Cellulose nanocrystals (CNCs) were obtained from the extraction and bleaching of jute cellulose as the enhancer, 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) as the carrier, the flavonoids-anthocyanidins and cinnamaldehyde as the bioactive agent, and finally a novel kind of polylactic acid (PLA)-based composite membrane was derived by electrostatic spun method. With the increasing concentration, HP-β-CDs cooperated with CNCs to regulate or control the release rate of bioactive compounds, which had a synergistic effect on the performance of the PLA matrix. The mechanical strength of PLA-3.2 composite with tannic acid (TA) surface cross-linking was 29.6 % higher than neat PLA, and could also continuously protect cells from oxidative stress and free radicals. In addition, excellent cell biocompatibility was found, and attributed to the interaction between bioactive compounds and cell membrane. In addition, we also found two excellent properties from our experimental results: obvious intelligent color reaction and good antibacterial ability. Finally, PLA-3.2 composites could be degraded by soil and are conducive to plant root growth. Hence, this work could solve many of the current problems of biodegradability and functionality of biopolymers for potential applications in areas such as intelligent bioactive food packaging.

Photoluminescent Nanocellulosic Film for Selective Hg2+ Ion Detection

We developed a highly sensitive solid-state sensor for mercury detection by stabilizing red-sub-nanometric fluorescent gold nanoclusters (AuNC, 0.9 ± 0.1 nm diameter) with bovine serum albumin in a matrix composed of cellulose nanofibrils (CNF) (BSA-AuNC/CNF). The main morphological and optical features of the system were investigated via atomic force/transmission electron microscopy and UV-Vis/fluorescence spectroscopy. The hybrid film (off-white and highly transparent) showed strong photoluminescene under UV irradiation. The latter is assigned to the AuNC, which also increase the ductility of the emitting film, which was demonstrated for high sensitivity Hg2+ detection. When used as a sensor system, following AuNC printing on CNF hybrid films, a limit of detection <10 nM was confirmed. What is more, nanocellulose films have a high pore structure and selective separation properties, showcasing a wide range of potential applications in many fields such as water treatment and oil-water separation.

Evaluating the reinforcing potential of enzymatic cellulose nanocrystals in polypropylene nanocomposite

Cellulose nanocrystals (CNCs) produced through enzymatic hydrolysis exhibit physicochemical properties that make them attractive as eco-friendly reinforcing agents in polymer composites. However, the extent of their efficacy within a polymeric matrix is yet to be fully established. This study investigated the reinforcing capabilities of enzymatic CNC (approximately 3 nm in diameter) isolated from bleached eucalyptus Kraft pulp (BEKP), focusing on its application in polypropylene (PP) nanocomposites produced by injection molding. The study compared the performance of this enzymatic CNC (1-5 % wt) with PP composites reinforced with micro-sized cellulose fibers (BEKP at 10-30 % wt, approximately 13 μm) and additionally with commercial CNC produced by sulfuric acid hydrolysis. Despite enzymatic CNC experiencing agglomeration during spray-drying, leading to an average diameter increase to 3 μm, it still significantly increased the crystallization and glass transition temperature of the PP matrix. However, this agglomeration likely hindered the improvement of the mechanical properties within the nanocomposites. The results also showed that enzymatic CNC provided higher thermal stability at lower reinforcement levels compared to BEKP, but this came with a reduction in stiffness, posing a significant consideration in composite design. The addition of a coupling agent greatly enhanced the dispersion of reinforcements and the interfacial adhesion within the matrix, contributing to the enhanced performance of the composite properties. Additionally, enzymatic CNC demonstrated potential for superior reinforcement efficacy compared to commercially available CNC produced by sulfuric acid hydrolysis. In conclusion, enzymatic CNC exhibited a promising role as nano-reinforcement for thermoplastic polymer nanocomposites, exhibiting higher thermal properties at lower reinforcing loads than traditional micro-sized fiber reinforcements. The absence of sulfur, coupled with its higher thermal stability and sustainable potential, positions enzymatic CNC as a particularly favorable choice for applications involving direct contact with food, cosmetics, pharmaceuticals, and biomedical materials.

Application progress of nanocellulose in food packaging: A review

With the increasing environmental and ecological problems caused by petroleum-based packaging materials, the focus has gradually shifted to natural resources for the preparation of functional food packaging materials. In addition to biodegradable properties, nanocellulose (NC) mechanical properties, and rich surface chemistry are also fascinating and desired to be one of the most probable green packaging materials. In this review, we firstly introduce the recent progress of novel applications of NC in food packaging, including intelligent packaging, nano(bio)sensors, and nano-paper; secondly, we focus on the modification techniques of NC to summarize the properties (antimicrobial, mechanical, hydrophobic, antioxidant, and so on) that are required for food packaging, to expand the new synthetic methods and application areas. After presenting all the latest advances related to material design and sustainable applications, an overview summarizing the safety of NC is presented to promote a continuous and healthy movement of NC toward the field of truly sustainable packaging.

Comprehensive enhancement of flame retardant starch/cellulose/diatomite composite foams via metal-organic coordination

In recent years, considerable attention has been given to the utilization of biomass for producing bio-based foams, such as starch-based foams. Despite their renewability and widespread availability, these foams still present certain drawbacks regarding their poor mechanical properties and flammability. To tackle these concerns, a metal ion cross-linking strategy was employed by incorporating calcium ions (Ca2+) solution into foamed starch/cellulose slurry. Followed by ambient drying, starch/cellulose composite foam was successfully fabricated with a remarkable enhancement in various properties. Specifically, compared to the control sample, the compressive strength and modulus increased by 26.2 % and 123.0 %, respectively. Additionally, the Ca2+ cross-linked starch/cellulose composite foam exhibited excellent heat resistance, water stability, and flame retardancy. The limiting oxygen index (LOI) reached 52 %, with a vertical combustion rating of V-0. Along with the addition of 2 phr diatomite, it demonstrated a significant enhancement on flame retardancy with a LOI of 65 %, although the apparent density of the composite foam was not low enough. This study indicated a green and simple method to obtain starch-based composite foams with enhanced comprehensive properties including thermal, water stability, mechanical, and flame retardancy, expanding their potential applications in areas such as building materials and rigid packaging.

Using bacterial cellulose to bridge covalent and physical crosslinks in hydrogels for fabricating multimodal sensors

Network optimization is vital for the polysaccharide based hydrogels with multiple crosslinks. In this study, we developed a 'two-step' strategy to activate synergistic effect of chemical and physical crosslinks using a poly (vinyl alcohol) (PVA)/bacterial cellulose (BC) hydrogel as a template. The BC nanofibers, on the one hand, acted as nucleating agents, participating in the crystallization of PVA, and on the other hand, were also involved in the formation of boronic ester bond, anchored with the PVA chains via chemical bonding. Therefore, the existence of BC nanofibers, as 'bridge', linked the crystalline regions and amorphous parts of PVA together, associating the two characteristic crosslinks, which was conducive to load transfer. The mechanical properties of resultant hydrogels, including the tensile elongation and strength, as well as fracture toughness, were significantly improved. Moreover, the dually cross-linked hydrogels possessed ionic conductivity, which was sensitive to the tensile deformation and environmental temperature. This study clarifies a unique role of BC nanofibers in hydrogels, and proposes an effective approach to construct multiple networks in the nanocellulose reinforced PVA hydrogels.

Orthotropic organization of a cellulose nanocrystal suspension realized via the combined action of frontal ultrafiltration and ultrasound as revealed by in situ SAXS

HYPOTHESIS

Rodlike cellulose nanocrystals (CNCs) exhibit significant potential as building blocks for creating uniform, sustainable materials. However, a critical hurdle lies in the need to enhance existing or devise novel processing that provides improved control over the alignment and arrangement of CNCs across a wide spatial range. Specifically, the challenge is to achieve orthotropic organization in a single-step processing, which entails creating non-uniform CNC orientations to generate spatial variations in anisotropy.

EXPERIMENTS

A novel processing method combining frontal ultrafiltration (FU) and ultrasound (US) has been developed. A dedicated channel-cell was designed to simultaneously generate (1) a vertical acoustic force thanks to a vibrating blade at the top and (2) a transmembrane pressure force at the bottom. Time-resolved in situ small-angle X-ray scattering permitted to probe the dynamical structural organization/orientation of CNCs during the processing.

FINDINGS

For the first time, a typical three-layer orthotropic structure that resembles the articular cartilage organization was achieved in one step during the FU/US process: a first layer composed of CNCs having their director aligned parallel to the horizontal membrane surface, a second intermediate isotropic layer, and a third layer of CNCs with their director vertically oriented along the direction of US wave propagation direction.

Water and Oxygen Barrier Properties of All-Cellulose Nanocomposites

Hydroxypropyl cellulose (HPC) is potentially interesting as a biobased, rigid food packaging material, but its stiffness and strength are somewhat low, and its water and oxygen transport rates are too high. To improve these characteristics, we investigated nanocomposites of HPC and cellulose nanocrystals (CNCs). These high-aspect-ratio nanoparticles display high stiffness and strength, and their high crystallinity renders them virtually impermeable. Exchanging the counterions of sulfate-ester decorated CNCs with cetyltrimethylammonium ions affords particles that are dispersible in ethanol (CTA.CNC) and allows solvent casting of HPC/CTA.CNC nanocomposite films, which, even at a CTA.CNC content of 90 wt %, are highly transparent. The introduction of CTA.CNC considerably increases the Young's modulus (Ey) and upper tensile strength (σUTS). For example, in the nanocomposite with 90% CTA.CNC, Ey = 7.6 GPa is increased 20-fold and σUTS = 42.7 MPa is more than doubled in comparison to HPC, whereas the extensibility (1.1%) remains appreciable. Composites with a CTA.CNC content of 70 wt % or less show a lower water vapor permeability (6.4-9.2 × 10-5 g μm m-2 s-1 Pa-1) than the neat HPC (1.5 × 10-4 g μm m-2 s-1 Pa-1), whereas the oxygen permeability (5.6 × 10-7-1.3 × 10-6 cm3 μm m-2 s-1 Pa-1) is reduced by 1 order of magnitude compared to HPC (3.2 × 10-6 cm3 μm m-2 s-1 Pa-1). The biobased nanocomposites retain their mechanical integrity at a relative humidity of 75% but readily disintegrate in water.

Oxidation of p-toluenesulfonic acid fractionated hybrid Pennisetum by different methods for carboxylated nanocellulose preparation: The evaluation of efficiency and sustainability

An innovative two-step process with p-toluenesulfonic acid (p-TsOH) and oxidation treatment was proposed for the efficient preparation of carboxylated nanocellulose from hybrid Pennisetum. Approximately 90 % of lignin was dissolved by p-TsOH acid under the optimal condition (80 °C, 20 min). Near-complete delignification (down to 0.5 %) and introduction of carboxylate groups (up to 1.48 mmol/g) could be achieved simultaneously during cellulose oxidation treatments without the requirement for bleaching. However, different oxidation methods expressed different efficiency and sustainability. 2,2,6,6-Tetramethylpiperidine-1-oxyl (TEMPO) oxidation has higher selectivity for the carboxylation reaction but with detriment to the aquatic environment. Fenton oxidation is more energy-consuming due to the lower carboxylate contents of products (maximum 188 μmol/g), with the carboxylic groups present as carboxylic acids, but competitive in terms of environmental sustainability, especially when renewable energy sources are available. The nanocelluloses obtained by the two oxidation methods differ in morphology and have different application prospects.

Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste

New materials' synthesis and utilization have shown many critical challenges in healthcare and other industrial sectors as most of these materials are directly or indirectly developed from fossil fuel resources. Environmental regulations and sustainability concepts have promoted the use of natural compounds with unique structures and properties that can be biodegradable, biocompatible, and eco-friendly. In this context, nanocellulose (NC) utility in different sectors and industries is reported due to their unique properties including biocompatibility and antimicrobial characteristics. The bacterial nanocellulose (BNC)-based materials have been synthesized by bacterial cells and extracted from plant waste materials including pineapple plant waste biomass. These materials have been utilized in the form of nanofibers and nanocrystals. These materials are found to have excellent surface properties, low density, and good transparency, and are rich in hydroxyl groups for their modifications to other useful products. These materials are well utilized in different sectors including biomedical or health care centres, nanocomposite materials, supercapacitors, and polymer matrix production. This review explores different approaches for NC production from pineapple waste residues using biotechnological interventions, approaches for their modification, and wider applications in different sectors. Recent technological developments in NC production by enzymatic treatment are critically discussed. The utilization of pineapple waste-derived NC from a bioeconomic perspective is summarized in the paper. The chemical composition and properties of nanocellulose extracted from pineapple waste may have unique characteristics compared to other sources. Pineapple waste for nanocellulose production aligns with the principles of sustainability, waste reduction, and innovation, making it a promising and novel approach in the field of nanocellulose materials.

2D nanomaterial-based 3D network hydrogels for anti-infection therapy

Two-dimensional nanomaterials (2D NMs) refer to nanomaterials that possess a planar topography with a thickness of one or several atomic layers. Due to their large specific surface areas, atomic thickness, rough edges, and electron confinement in two dimensions, they have emerged as promising antimicrobial agents over antibiotics in combating bacterial infections. However, 2D NMs encounter issues such as low bio-safety, easy aggregation, and limited tissue penetration efficiency. To address these concerns, hydrogels with three-dimensional (3D) networks have been developed to encapsulate 2D NMs, aiming to enhance their biocompatibility, biodegradability, and ability to regulate and remodel the tissue microenvironment at the infected site. This review systematically summarizes the current studies on 2D NM-based antibacterial hydrogels with 3D network structures (named 2N3Hs). Firstly, we introduce the emerging types of 2N3Hs and describe their antibacterial actions. Subsequently, we discuss the applications of 2N3Hs in three biomedical fields, including wound dressing, cancer treatment, and bone regeneration. Finally, we conclude the review with current challenges and future developments for 2N3Hs, highlighting their potential as a promising choice for next-generation biomedical devices, particularly in the field of tissue engineering and regenerative medicine. This review aims to provide a comprehensive and panoramic overview of anti-infective 2N3Hs for various biomedical applications.

Biocomposites of Cellulose Isolated from Coffee Processing By-Products and Incorporation in Poly(Butylene Adipate-Co-Terephthalate) (PBAT) Matrix: An Overview

With its extensive production and consumption, the coffee industry generates significant amounts of lignocellulosic waste. This waste, primarily comprising coffee biomasses, is a potential source of cellulose. This cellulose can be extracted and utilized as a reinforcing agent in various biocomposites with polymer matrices, thereby creating high-value products. One such biodegradable polymer, Poly(butylene adipate-co-terephthalate) (PBAT), is notable for its properties that are comparable with low-density polyethylene, making it an excellent candidate for packaging applications. However, the wider adoption of PBAT is hindered by its relatively high cost and lower thermomechanical properties compared with conventional, non-biodegradable polymers. By reinforcing PBAT-based biocomposites with cellulose, it is possible to enhance their thermomechanical strength, as well as improve their water vapor and oxygen barrier capabilities, surpassing those of pure PBAT. Consequently, this study aims to provide a comprehensive review of the latest processing techniques for deriving cellulose from the coffee industry's lignocellulosic by-products and other coffee-related agro-industrial wastes. It also focuses on the preparation and characterization of cellulose-reinforced PBAT biocomposites.

Low-temperature, ultra-fast, and recyclable self-healing nanocomposites reinforced with non-solvent silylated modified cellulose nanocrystals

Developing polymeric materials with remarkable mechanical properties and fast self-healing performance even at low temperatures is challenging. Herein, the polymeric nanocomposites containing silane-treated cellulose nanocrystals (SCNC) with ultrafast self-healing and exceptional mechanical characteristics were developed even at low temperatures. First, CNC is modified with a cyclic silane coupling agent using an eco-friendly chemical vapor deposition method. The nanocomposite was then fabricated by blending SCNC with matrix prepolymer, prepared from monomers that possess lower critical solution temperature, followed by the inclusion of dibutyltin dilaurate and hexamethylene diisocyanate. The self-healing capability of the novel SCNC/polymer nanocomposites was enhanced remarkably by increasing the content of SCNC (0-3 wt%) and reaching (≥99 %) at temperatures (5 & 25 °C) within <20 min. Moreover, SCNC-3 showed a toughness of (2498 MJ/m3) and SCNC-5 displayed a robust tensile strength of (22.94 ± 0.4 MPa) whereas SCNC-0 exhibited a lower tensile strength (7.4 ± 03 MPa) and toughness of (958 MJ/m3). Additionally, the nanocomposites retain their original mechanical properties after healing at temperatures (5 & 25 °C) owing to the formation of hydrogen bonds via incorporation of the SCNC. These novel SCNC-based self-healable nanocomposites with tunable mechanical properties offer novel insight into preparing damage and temperature-responsive flexible and wearable devices.

Cellulose nanocrystals reinforced chitosan/titanium dioxide bionanocomposite with enhanced interfacial compatibility: Fabrication, characterization, and application in fresh-cut apple slices

This research aimed to investigate the feasibility of using a bionanocomposite made of chitosan, CNC, and TiO2 nanoparticles to package freshly sliced apples. At the outset, the effect of varying concentrations of CNC (1, 5, and 10 %) and TiO2 (1, 3, and 5 %) on the mechanical, thermal, and water sensitivity characteristics of the chitosan bionanocomposite was studied. Among different combinations, the bionanocomposite containing 10 % CNC and 3 % TiO2 displayed significant enhancements compared to neat chitosan film. Notably, it exhibited a substantial increase in tensile strength (78.2 %), glass transition temperature (26.7 %), and melting temperature (30.0 %) compared to neat chitosan film. Additionally, it demonstrated reduced WVP (27.8 %), FWS (44.4 %), and SR (50.7 %). These improvements were attributed to the synergistic interactions among chitosan, CNC, and TiO2 nanoparticles through hydrogen and oxygen bonding, corroborated by spectral changes in the material. The photocatalytic degradation of ethylene and microbes by UV-A (intermittent) activated TiO2 contained in the developed bionanocomposite was confirmed by the retention of acceptable quality and radical scavenging activity (70 % retention) of fresh-cut apple slices up to 11 days. The developed bionanocomposite can thus preserve the quality of ethylene-producing horticultural produce.

Non-fuel applications of bio-oil for sustainability in management of bioresources

Biomass valorization by thermochemical conversion method is a promising and intriguing pathway due to the flexibility of utilizing a diverse group of biomass and biowastes, specific product delivery mechanism through manipulation of process parameters, and wide applicability of the products. Pyrolysis has been viewed as an effective valorization technique to transform biowastes into pyrolytic oil, solid char, and syngas. Syngas is generally fed to the pyrolysis process to generate heat necessary for the pyrolysis process to sustain. Pyrolysis may also be a subsidiary component in a biorefinery system where it draws feedstocks from refinery process residues or the side streams of the refinery operation. In recent times, pyrolysis products have been under intense research for their usability and diverse applicability. Bio-oil's rich chemical makeup has promising potential to be used as an advanced biofuel and is considered as a storehouse of diverse chemical species ranging from green solvents to bioactive chemicals. The current review provides a state of knowledge on non-fuel uses of bio-oil and concludes that the pyrolysis process and products could be a part of the future bioeconomy if designed in a manner that biowastes are transformed into value-added products which replace products of petroleum origin.

Recent advances in the production of bionanomaterials for development of sustainable food packaging: A comprehensive review

Polymers originating from natural macromolecule based polymeric materials have gained popularity due to the demand for green resources to develop unique, eco-friendly, and high-quality biopolymers. The objective of this review is to address the utilization of bionanomaterials to improve food quality, safety, security, and shelf life. Bionanomaterials are synthesized by integrating biological molecules with synthetic materials at the nanoscale. Nanostructured materials derived from biopolymers such as cellulose, chitin, or collagen can be employed for the development of sustainable food packaging. Green materials are cost-effective, biocompatible, biodegradable, and renewable. The interaction of nanoparticles with biological macromolecules must be analyzed to determine the properties of the packaging film. The nanoparticles control the growth of bacteria that cause food spoiling by releasing distinctive chemicals. Bio-nanocomposites and nanoencapsulation systems have been used in antimicrobial bio-based packaging solutions to improve the efficiency of synergism. Nanomaterials can regulate gas and moisture permeability, screen UV radiation, and limit microbial contamination, keeping the freshness and flavor of the food. Food packaging based on nanoparticles embedded biopolymers can alleviate environmental concerns by lowering the amount of packaging materials required and enhancing packaging recyclability. This results in less waste and a more eco-sustainable approach to food packaging. The study on current advances in the production of bionanomaterials for development of sustainable food packaging involves a detailed investigation of the available data from existing literature, as well as the compilation and analysis of relevant research results using statistical approaches.

Isolation of cellulose nanofibers from rapeseed straw via chlorine-free purification method and its application as reinforcing agent in carboxymethyl cellulose-based films

In this study, cellulose nanofibers (CNFs) were successfully isolated from rapeseed straw (RS) whose valorization has been rarely investigated to date. A combined bleaching method without chlorine was applied for the purification of cellulose fibers, previously unexplored for RS. Chemical composition analysis and Fourier-transform infrared spectroscopy (FTIR) indicated that the purification method eliminated hemicellulose and reduced lignin content from 24.4 % to 1.8 %. The isolation of CNFs was performed using sulfuric acid hydrolysis under different acid concentrations (55 and 60 % v/v) and hydrolysis times (15, 30, and 45 min). The isolated CNFs were characterized by FTIR, X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The formation of CNFs was confirmed by a significant increase in crystallinity index from 46.45 % of RS to >79.41 % of CNFs, depending on acid concentration and isolation duration. Carboxymethyl cellulose (CMC) films with different contents of CNFs were prepared by casting method. The mechanical properties and cytotoxicity of the prepared films were investigated. The CNFs obtained from RS via a chlorine-free purification method showed promising results for their usage as reinforcement in CMC matrix and film fabrication for various applications such as transdermal medicine and food packaging.

Nanocellulose-based composite aerogels toward the environmental protection: Preparation, modification and applications

Nanocellulose aerogel has the advantages of porosity, low density and high specific surface area, which can effectively realize the adsorption and treatment of wastewater waste gas. The methods of preparing nanocellulose mainly include mechanical, chemical and biological methods. Nanocellulose is formed into nanocellulose aerogel after gelation, solvent replacement and drying processes. Based on the advantages of easy modification of nanocellulose aerogels, nanocellulose aerogels can be functionalized with conductive fillers, reinforcing fillers and other materials to give nanocellulose aerogels in electrical, mechanical and other properties. Through functionalization, the properties of nanocellulose composite aerogel such as hydrophobicity and adsorption are improved, and the aerogel is endowed with the ability of electrical conductivity and electromagnetic shielding. Through functionalization, the applicability and general applicability of nanocellulose composite aerogel in the field of environmental protection are improved. In this paper, the preparation and functional modification methods of nanocellulose aerogels are reviewed, and the application prospects of nanocellulose composite aerogels in common environmental protection fields such as dye adsorption, heavy metal ion adsorption, gas adsorption, electromagnetic shielding, and oil-water separation are specifically reviewed, and new solutions are proposed.

Obtaining Cellulose Nanocrystals from Olive Tree Pruning Waste and Evaluation of Their Influence as a Reinforcement on Biocomposites

The objective of this work is to improve the mechanical properties of polylactic acid (PLA) by incorporating cellulose nanocrystals (CNC) previously obtained from a cellulose pulp extracted from olive tree pruning (OTP) waste. Composites were manufactured by melt processing and injection moulding to evaluate the effect of the introduction of CNC with conventional manufacturing methods. This OTP-cellulose pulp was subjected to a further purification process by bleaching, thus bringing the cellulose content up to 86.1%wt. This highly purified cellulose was hydrolysed with sulfuric acid to obtain CNCs with an average length of 267 nm and a degradation temperature of 300 °C. The CNCs obtained were used in different percentages (1, 3, and 5%wt.) as reinforcement in the manufacture of PLA-based composites. The effect of incorporating CNC into PLA matrix on the mechanical, water absorption, thermal, structural, and morphological properties was studied. Maximum tensile stress and Young's modulus improved by 87 and 58%, respectively, by incorporating 3 and 5%wt. CNC. Charpy impact strength increased by 21% with 3%wt. These results were attributed to the good dispersion of CNCs in the matrix, which was corroborated by SEM images. Crystallinity index, glass transition, and melting temperatures were maintained.

In situ capping of silver nanoparticles with cellulosic matrices from wheat straws in enhancing their antimicrobial activity: Synthesis and characterization

Silver nanoparticles have gained worldwide attention in the scientific community due to their high antimicrobial activity. However, they tend to agglomerate and lose their shape and properties, thus capping agents necessary to protect their shapes, sizes, and properties. To enhance their antimicrobial activity, this research aimed to cap silver nanoparticles with cellulosic matrices from wheat straws. The wheat straw was delignified with 6% HNO3, and the residual was treated with 1% NaOH and NaClO: CH3COOH (1:1), then used to synthesize cellulose nanocrystals via acid hydrolysis. AgNPs were incorporated into the CPC and CNCs by in-situ synthesis using NaHB4 as the reducing agent. Fourier Transform Infrared, Scanning Electron Microscopy, and X-ray diffraction were used to investigate their features. The findings exhibited crystallinity increased with subsequent treatments, according to XRD analysis. Ultraviolet-visible, FTIR, TEM, and XRD analysis confirmed the capping of AgNPs onto the cellulosic materials. Antibacterial activity against Staphylococcus aureus and Escherichia coli, with CNCs-AgNPs composite, exhibited higher activity compared to CPC-AgNPs composite due to the increased surface area and excellent binding on the surface of the composite.

The emergence of hybrid cellulose nanomaterials as promising biomaterials

Cellulose nanomaterials (CNs) are promising green materials due to their unique properties as well as their environmental benefits. Among these materials, cellulose nanofibrils (CNFs) and nanocrystals (CNCs) are the most extensively researched types of CNs. While they share some fundamental properties like low density, biodegradability, biocompatibility, and low toxicity, they also possess unique differentiating characteristics such as morphology, rheology, aspect ratio, crystallinity, mechanical and optical properties. Therefore, numerous comparative studies have been conducted, and recently, various studies have reported the synergetic advantages resulting from combining CNF and CNC. In this review, we initiate by addressing the terminology used to describe combinations of these and other types of CNs, proposing "hybrid cellulose nanomaterials" (HCNs) as the standardized classifictation for these materials. Subsequently, we briefly cover aspects of properties-driven applications and the performance of CNs, from both an individual and comparative perspective. Next, we comprehensively examine the potential of HCN-based materials, highlighting their performance for various applications. In conclusion, HCNs have demonstraded remarkable success in diverse areas, such as food packaging, electronic devices, 3D printing, biomedical and other fields, resulting in materials with superior performance when compared to neat CNF or CNC. Therefore, HCNs exhibit great potential for the development of environmentally friendly materials with enhanced properties.

Nano/micro-cellulose-based materials as remarkable sorbents for the remediation of agricultural resources from chemical pollutants

Overusing pesticides, fertilizers, and synthetic dyes has significantly increased their presence in various parts of the environment. The transportation of these pollutants into agricultural soil and water through rivers, soils, and groundwater has seriously threatened human and ecosystem health. Applying techniques and materials to clean up agricultural sources from pesticides, heavy metals (HMs), and synthetic dyes (SDs) is one of the major challenges in this century. The sorption technique offers a viable solution to remediate these chemical pollutants (CHPs). Cellulose-based materials have become popular in nano and micro scales because they are widely available, safe to use, biodegradable, and have a significant ability to absorb substances. Nanoscale cellulose-based materials exhibit greater capacity in absorbing pollutants compared to their microscale counterparts because they possess a larger surface area. Many available hydroxyl groups (-OH) and chemical and physical modifications enable the incorporation of CHPs on to cellulose-based materials. Following this potential, this review aims to comprehensively summarize recent advancements in the field of nano- and micro-cellulose-based materials as effective adsorbents for CHPs, given the abundance of cellulosic waste materials from agricultural residues. The recent developments pertaining to the enhancement of the sorption capacity of cellulose-based materials against pesticides, HMs, and SDs, are deliberated.

A Study on a Polymeric Foam Based on Pulse Proteins and Cellulose Fibrils

Biofoams are a challenge for scientists in terms of innovation. Incorporation of cellulose fibrils (CF), might help improve the microstructure of foams, thus this study focuses on studying the impact of CF on the foaming properties and rheology of lentil protein (LP) foams at various pH and CF concentrations. Additionally, LP-CF mixtures were transformed into solid foams, and their microstructure, physical properties, and morphology were evaluated. CF concentration significantly impacted on LP-CF foam properties, primarily due to high viscosity values. Increased CF concentration resulted in improved FS values (up to 77 min) at all pH values. This is likely attributed to associative interactions and coacervates formation. Also, foam microstructure could be related to apparent viscosity, suggesting the role of viscosity in preserving the integrity of the wet foam structure during freezing and lyophilization processes. However, elevated viscosity values might negatively impact properties such as foaming capacity and produce denser microstructures. The microstructure and morphology analysis revealed that certain foams exhibited a sponge-like structure with open pores and semi-spherical shapes, supported by CF fibers extending and forming layers. However, the structure itself was irregular. While others exhibited non-uniform, irregular pore size, and shape, along with a denser structure. These findings contribute to understanding the behavior of LP-CF mixtures, although additional investigations on mechanical properties, biodegradability, and hydrophobicity are necessary to reach their full potential for various applications.

The Colloidal Properties of Nanocellulose

Nanocelluloses are anisotropic nanoparticles of semicrystalline assemblies of glucan polymers. They have great potential as renewable building blocks in the materials platform of a more sustainable society. As a result, the research on nanocellulose has grown exponentially over the last decades. To fully utilize the properties of nanocelluloses, a fundamental understanding of their colloidal behavior is necessary. As elongated particles with dimensions in a critical nanosize range, their colloidal properties are complex, with several behaviors not covered by classical theories. In this comprehensive Review, we describe the most prominent colloidal behaviors of nanocellulose by combining experimental data and theoretical descriptions. We discuss the preparation and characterization of nanocellulose dispersions, how they form networks at low concentrations, how classical theories cannot describe their behavior, and how they interact with other colloids. We then show examples of how scientists can use this fundamental knowledge to control the assembly of nanocellulose into new materials with exceptional properties. We hope aspiring and established researchers will use this Review as a guide.

Effects of different rapid cooling temperatures and annealing on functional properties of starch straws after thermoplastic extrusion

To improve the performance of starch straws in rapidly cooling and annealing procedure of thermoplastic extrusion, control straw was prepared through slowly cooling at 25 °C, and starch straw was prepared through regulating different rapid cooling temperatures including 20 °C, 5 °C, -10 °C and -20 °C. The results indicated that control straw exhibited a homogeneous state, while starch straws treated by rapid cooling displayed like a wash-board structure. Compared to control straw, the ratio of the absorption peak intensity of 1047 and 1022 cm^-1 increased from 1.050 to 1.455 as cooling temperatures decreased from 25 °C to -20 °C, indicating short-range order of the double helix structure significantly enhanced. The relative crystallinities of starch straws increased from 12.01 % to 16.58 %. The maximum bending force value (60.92 N) of starch straws cooled at -20 °C was significantly higher than that (46.14 N) of control straw. Conversely, the modulus of elasticity in bending values (4.21-16.43 N/cm) of rapid cooling-treated straws were significantly lower than that (48.42 N/cm) of control straw. Water absorption of rapid cooling-treated straws were lower than that of control straw, indicating the hydrophobicity property of starch straws significantly improved.

Potato thermoplastic starch nanocomposite films reinforced with nanocellulose

Potato is a widely available feedstock with biocompatibility and biodegradability properties, making it a strong candidate for producing thermoplastic starch. The application of thermoplastic starch to replace petroleum-based plastic as a sustainable and environmentally friendly approach led to its further improvement through various techniques such as modification and filler reinforcement. Numerous studies have been done addressing the properties enhancement of potato thermoplastic starch through filler reinforcement including nanocellulose. This review focus on the recent and future potential of potato-based starch as one of the feedstocks for producing potato thermoplastic starch composites reinforced with nanocellulose.

Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset

Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.

Highly Efficient Flame-Retardant and Enhanced PVA-Based Composite Aerogels through Interpenetrating Cross-Linking Networks

Poly(vinyl alcohol) (P)/alginate (A)/MMT (M) (PAM) composite aerogels was modified through interpenetrating cross-linking of methyltriethoxysilane (Ms) or γ-aminopropyltriethoxysilane (K) and calcium ion (Ca²⁺) as a cross-linking agent, respectively. The compressive moduli of the cross-linked PAM/MsCa and PAM/KCa aerogels greatly increased to 17.4 and 22.1 MPa, approximately 10.5- and 8.2-fold of that of PAM aerogel, respectively. The limited oxygen index (LOI) values for PAM/MsCa and PAM/KCa composite aerogels increased from 27.0% of PAM aerogel to 40.5% and 56.8%. Compared with non-cross-linked PAM aerogel, the peak heat release rate (PHRR) of PAM/MsCa and PAM/KCa composite aerogels dramatically decreased by 34% and 74%, respectively, whereas the PAM/KCa aerogel presented better flame retardancy and lower smoke toxicity than the PAM/MsCa aerogel because of the release of more inert gases and the barrier action of more compact char layer during the combustion. The highly efficient flame-retardant PAM-based composite aerogels with excellent mechanical properties are promising as a sustainable alternative to traditional petroleum-based foams.

Chitosan enhanced the stability and antibiofilm activity of self-propelled Prussian blue micromotor

The emergence, spread and difficult removal of bacteria biofilm, represent an ever-increasing persistent infections and medical complications challenge worldwide. Herein, a self-propelled system Prussian blue micromotor (PB MMs) were constructed by gas-shearing technology for efficient degradation of biofilms by combining chemodynamic therapy (CDT) and photothermal therapy (PTT). With the interpenetrating network crosslinked by alginate, chitosan (CS) and metal ions as the substrate, PB was generated and embedded in the micromotor at the same time of crosslinking. The micromotors are more stable and could capture bacteria with the addition of CS. The micromotors show excellent performance, containing photothermal conversion, reactive oxygen species (ROS) generation and bubble produced by catalyzing Fenton reaction for motion, which served as therapeutic agent could chemically kill bacteria and physically destroy biofilm. This research work opens a new path of an innovative strategy to efficiently remove biofilm.

Recent progress and future directions of membranes green polymers for oily wastewater treatment

The preparation, modification and application of green polymers such as poly-lactic acid (PLA), chitosan (CS), and cellulose acetate (CA) for oily wastewater treatment is summed up in this review. Due to the low environmental pollution, good chemical resistivity, high hydrophobicity, and good capacity for water-oil emulsion separation of the presented polymers, it then highlights the various membrane production methods and their role in producing effective membranes, with a focus on recent advances in improving membrane properties through the addition of various Nano materials. As a result, the hydrophilic/hydrophobic properties that are critical in the oil separation mechanism are highlighted. Finally, it looks at the predictions and challenges in oil/water separation and recovery. These ideas are discussed with a focus on modern production methods and oil separation proficiency.

A road map on synthetic strategies and applications of biodegradable polymers

Biodegradable polymers have emerged as fascinating materials due to their non-toxicity, environmentally benign nature and good mechanical strength. The toxic effects of non-biodegradable plastics paved way for the development of sustainable and biodegradable polymers. The engineering of biodegradable polymers employing various strategies like radical ring opening polymerization, enzymatic ring opening polymerization, anionic ring opening polymerization, photo-initiated radical polymerization, chemoenzymatic method, enzymatic polymerization, ring opening polymerization and coordinative ring opening polymerization have been discussed in this review. The application of biodegradable polymeric nanoparticles in the biomedical field and cosmetic industry is considered to be an emerging field of interest. However, this review mainly highlights the applications of selected biodegradable polymers like polylactic acid, poly(ε-caprolactone), polyethylene glycol, polyhydroxyalkanoates, poly(lactide-co-glycolide) and polytrimethyl carbonate in various fields like agriculture, biomedical, biosensing, food packaging, automobiles, wastewater treatment, textile and hygiene, cosmetics and electronic devices.

Dispersibility Characterization of Cellulose Nanocrystals in Polymeric-Based Composites

Cellulose nanocrystals (CNCs) are hydrophilic nanoparticles extracted from biomass with properties and functions different from cellulose and are being developed for property-oriented applications such as high stiffness, abundant active groups, and biocompatibility. It has broad application prospects in the field of composite materials, while the dispersibility of the CNC in polymers is the key to its application performance. Many reviews have discussed in-depth the modification strategies to improve the dispersibility of the CNC and summarized all characterization for the CNC, but there are no reviews on the in-depth exploration of dispersion characterization. This review is a comprehensive summary of the characterization of CNC dispersion in the matrix in terms of direct observation, indirect evaluation, and quantified evaluation, summarizing how and why different characterization tools reveal dispersibility. In addition, "decision tree" flowcharts are presented to provide the reader with a reference for selecting the appropriate characterization method for a specific composite.

Anthracnose Disease Control and Postharvest Quality of Hass Avocado Stored in Biobased PLA/PBAT/Pine Essential Oil/Chitosan Active Packaging Nets

For sale in the domestic market, Hass avocados are kept in non-biodegradable plastic nets and stored at an ambient temperature. The fungus Colletotrichum gloeosporioides can cause important losses at this stage. Consequently, formulations based on polylactic acid (PLA)/poly (butylene adipate-co-terephthalate) (PBAT) 60/40 biodegradable blends added with pine essential oil (PEO) at 10, 12, 14, and 20% and coated with 1% chitosan (CH) were used for the elaboration of nets, which were evaluated on C. gloeosporioides and Rhizopus stolonifer on nutrient media and fruit and on the ripening behavior of Hass avocados at ambient temperature. The spore germination stage of C. gloeosporioides was the most extensively damaged (78% inhibition). The incidence of anthracnose was notably reduced by almost 80% in the avocados stored in the 60/40 PLA/PBAT nets coated with 1% CH. The overall values regarding weight loss, °Brix, and dry matter were c.a. 23.5%, 7.5, and 24.5%, respectively. The changes in firmness, color, and CO₂ production were particularly associated with the initial harvest index and storage temperature rather than with the nets. In future research, essays on nets should include evaluations at the commercial levels.

Nanoengineering and green chemistry-oriented strategies toward nanocelluloses for protein sensing

As one of the most important functional organic macromolecules of life, proteins not only participate in the cell metabolism and gene regulation, they also earnestly protect the body's immunity system, leading to a powerful biological shield and homeostasis. Advances in nanomaterials are boosting the significant progress in various applications, including the sensing and examination of proteins in trace amount. Nanocellulose-oriented protein sensing is at the forefront of this revolution. The inherent feature of high biocompatibility, low cytotoxicity, high specific area, good durability and marketability endow nanocellulose with great superiority in protein sensing. Here, we highlight the recent progress of protein sensing using nanocellulose as the biosensor in trace amount. Besides, various kinds of construction strategies for nanocelluloses-based biosensors are discussed in detail, to enhance the agility and accuracy of clinical/medical diagnostics. Finally, several challenges in the approbatory identification of new approaches for the marketization of biomedical sensing that need further expedition in the future are highlighted.

Isolation and Characterization of Cellulose Nanocrystals from Date Palm Waste

This study presents the isolation, characterization, and kinetic analyses of cellulose nanocrystals (CNCs) from date palm waste in the United Arab Emirates. After bleaching date palm stem waste with acidified NaClO₂ and delignification via NaOH treatments, cellulose was extracted. Mineral acid hydrolysis (62 wt % H₂SO₄) was performed at 45 °C for 45 min to produce crystalline nanocellulose. Fourier transform infrared (FTIR) and chemical composition analysis confirmed the removal of noncellulosic constituents. The crystallinity index increased gradually with chemical treatments, according to the obtained X-ray diffraction (XRD) results. Thermogravimetric analysis and differential scanning calorimetry results revealed that the CNC has high thermal stability. The Coats-Redfern method was used to determine the kinetic parameters. The kinetic analysis confirmed that CNC has more activation energy than cellulose and thus confirms its compact and resistive crystalline structure. This has been attributable to the stronger hydrogen bonding in CNC crystalline domains than that in cellulose crystalline domains. Scanning electron microscopy revealed that lignin and hemicellulose were eliminated after chemical pretreatments, and CNC with a rodlike shape was obtained after hydrolysis. Moreover, transmission electron microscopy confirmed the nanoscale of crystalline cellulose. ζ potential analysis indicated that the CNC afforded a stable suspension (-29.27 mV), which is less prone to flocculation. Kinetic analyses of cellulose and cellulose nanocrystals isolated from date palm waste are useful for making composites and designing selective pyrolysis reactors.

Biodegradable, biomimetic, and nanonet-engineered membranes enable high-flux and highly-efficient oil/water separation

Porous membranes with fascinating super-wettable surface and tunable porous architecture for oil-water separation have been developed rapidly, however, the serious secondary marine pollution caused by the non-degradable defectiveness of membranes themselves is still a thorny problem. Herein, we create an eco-friendly membrane with biomimetic cobweb-like nanostructure via assembling two-dimensional bacterial cellulose nanonets on the starch nanofibrous membrane on a large scale. The obtained novel composite membranes exhibit integrated properties of sub-micron pore size, ultrahigh porosity, superhydrophilicity, and underwater superoleophobicity, stemming from the synergistic effect of the hydrated nanonet-skin-layer and porous starch matrix. By virtue of the narrow-distributed sub-micron pores, ultrahigh porosity, and ultrathin thickness, the resulting membrane shows outstanding performance of excellent separation efficiency (up to 99.996%), high percolation flux (maximum of 15968 L m^-2 h^-1), well surpassing the conventional microfiltration membranes. More significantly, with the advantage of biodegradability and anti-oil-fouling property, the membrane could serve as the robust platform for long-term wastewater remediation.

Gelatin-based cellular solids: Fabrication, structure and properties

Although most cellular polymers are made from thermoplastics using different foaming technologies, gelatin and many other natural polymers can form hydrogels and convert them to cellular solids using various techniques, many of which differ from traditional plastic foaming, and so does their resulting structures. Cellular solids from natural hydrogels are porous materials that often exhibit a combination of desirable properties, including high specific surface area, biochemical activity, as well as thermal and acoustic insulation properties. Among natural hydrogels, gelatin-based porous materials are widely explored due to their availability, biocompatibility, biodegradability and relatively low cost. In addition, gelatin-based cellular solids have outstanding properties and are currently subject to increasing scientific research due to their potential in many applications, such as biocompatible cellular materials or biofoams to facilitate waste treatment. This article aims at providing a comprehensive review of gelatin cellular solids processing and their processing-properties-structure relationship. The fabrication techniques covered include aerogels production, mechanical foaming, blowing agents use, 3D printing, electrospinning and particle leaching methods. It is hoped that the assessment of their characteristics provides compiled information and guidance for selecting techniques and optimization of processing conditions to control material structure and properties to meet the needs of the finished products.

Toward Green Atom Transfer Radical Polymerization: Current Status and Future Challenges

Reversible-deactivation radical polymerizations (RDRPs) have revolutionized synthetic polymer chemistry. Nowadays, RDRPs facilitate design and preparation of materials with controlled architecture, composition, and functionality. Atom transfer radical polymerization (ATRP) has evolved beyond traditional polymer field, enabling synthesis of organic-inorganic hybrids, bioconjugates, advanced polymers for electronics, energy, and environmentally relevant polymeric materials for broad applications in various fields. This review focuses on the relation between ATRP technology and the 12 principles of green chemistry, which are paramount guidelines in sustainable research and implementation. The green features of ATRP are presented, discussing the environmental and/or health issues and the challenges that remain to be overcome. Key discoveries and recent developments in green ATRP are highlighted, while providing a perspective for future opportunities in this area.

Production of Cellulose Nano-Fibers and Its Application in Poly-Lactic-Acid: Property Improvement by New Types of Coupling Agents

Poly-lactic-acid is a biopolymer that can be an attractive alternative to replace petroleum-based polymers. It has advanced mechanical properties, melts easily with less energy consumption, and can be used to produce biodegradable plastics using renewable sources. However, some of the properties of poly-lactic-acid are inferior to those of traditional polymers: e.g., intensive farming is necessary for high agricultural yield, the composting needs special conditions, it is difficult to blend with other commonly used plastics, expensive, high permeability, etc. Therefore, the present work seeks to improve the structure and mechanical properties of the poly-lactic-acid incorporated by cellulose nano-fibers obtained from rice straw by a chemical acidic treatment. The fibers were incorporated into the poly-lactic-acid polymer matrix in a concentration of 1% by two-roll mill. To improve the incorporation of the fibers in the matrix, different coupling agents were used: PE-g-MA, vinyl trimethoxy silane, polyethylene-glycol with different molecular weight, and two types of experimentally synthetized α-olefin-maleic anhydride-based copolymers. The properties of the final composite could be improved, however those depend on the coupling agent to be used. The improving effect of the tested chemicals had been depended on the temperature. Based on structure analysis, both chemical and physical interactions were proposed between the cellulose nanofiber and polymer matrix. The thermogravimetric and viscosity results well represented the softener effect of the used chemical agents.

Lightweight Epoxy/Cotton Fiber-Based Nanocomposites with Carbon and Fe3O4 for Electromagnetic Interference Shielding

Cotton fiber (CF)-based electroconductive papers were prepared by facile aqueous dispersion and drying processes combined with carbon nanotubes (CNTs) or graphene nanosheets (GNPs). To enhance the electromagnetic interference (EMI) shielding performance of the manufactured nanocomposites, the electroconductive papers were soaked with epoxy resin, which cooperated with the inner sprayed Fe₃O₄ nanoparticles. The EMI shielding effectiveness of Epoxy/CF-30-Fe₃O₄-30GNPs reached 33.1 dB, of which over 85.0% is attributed to absorption, which is mainly believed to be caused by the combination of GNPs and Fe₃O₄ nanoparticles due to their special structures and synergetic effects. Moreover, the infiltration of epoxy between the randomly distributed loose CFs and the multiple reflections inside the interconnected networks could also help to improve the EMI shielding performance of GNP-added samples. The prepared lightweight and stiff Epoxy/CF-30-Fe₃O₄-30GNP composites have promising applications in civil or military fields.