The effects of metallic engineered nanoparticles upon plant systems: An analytic examination of scientific evidence

Zinc oxide nanoparticles influence on plant tolerance to salinity stress: insights into physiological, biochemical, and molecular responses

A slight variation in ecological milieu of plants, like drought, heavy metal toxicity, abrupt changes in temperature, flood, and salt stress disturbs the usual homeostasis or metabolism in plants. Among these stresses, salinity stress is particularly detrimental to the plants, leading to toxic effects and reduce crop productivity. In a saline environment, the accumulation of sodium and chloride ions up to toxic levels significantly correlates with intracellular osmotic pressure, and can result in morphological, physiological, and molecular alterations in plants. Increased soil salinity triggers salt stress signals that activate various cellular-subcellular mechanisms in plants to enable their survival in saline conditions. Plants can adapt saline conditions by maintaining ion homeostasis, activating osmotic stress pathways, modulating phytohormone signaling, regulating cytoskeleton dynamics, and maintaining cell wall integrity. To address ionic toxicity, researchers from diverse disciplines have explored novel approaches to support plant growth and enhance their resilience. One such approach is the application of nanoparticles as a foliar spray or seed priming agents positively improve the crop quality and yield by activating germination enzymes, maintaining reactive oxygen species homeostasis, promoting synthesis of compatible solutes, stimulating antioxidant defense mechanisms, and facilitating the formation of aquaporins in seeds and root cells for efficient water absorption under various abiotic stresses. Thus, the assessment mainly targets to provide an outline of the impact of salinity stress on plant metabolism and the resistance strategies employed by plants. Additionally, the review also summarized recent research efforts exploring the innovative applications of zinc oxide nanoparticles for reducing salt stress at biochemical, physiological, and molecular levels.

Silver Shell Thickness-Dependent Conductivity of Coatings Based on Ni@Ag Core@shell Nanoparticles

Introductions

Ink based on metallic nanoparticles has been widely used so far for the fabrication of electronic circuits and devices using printing technology. This study aimed at the analysis of the effect of the silver shell thickness of nickel@silver core@shell (Ni@Ag) nanoparticles (NPs) on the fabrication and conductive properties of deposited coatings.

Methods

The process of the synthesis of Ni@Ag NPs with various silver shell thicknesses was developed. The physicochemical properties (size, stability against aggregation process) of synthesized Ni@Ag nanoparticles were analyzed. The films based on ink containing Ni@Ag NPs with different silver shell thicknesses were fabricated and sintered in a temperature range of 120-300 °C and at times from 15 to 90 min. The dependence of their conductive properties on the applied temperature and time as well as silver shell thickness was evaluated.

Results

Ni NPs were coated with 10, 20, 30, 35, 45, and 55 nm silver shell thickness. The resistivity of coatings based on obtained NPs depends on the thickness of the Ag shell and the sintering temperature. After sintering at 300 °C, the highest decrease in its value (at an optimal sintering time of 60 min) from about 100 µΩ·cm to 9 µΩ·cm was observed when the thickness of the shell increased from 10 to 55 nm. At the lowest sintering temperature (120 °C) the highest conductivity (about 50% of that for bulk nickel) was obtained for films based on Ni@Ag NPs with 45 and 55 nm of the silver shell thickness.

Discussions

The analysis of the resistivity of the sintered films showed that higher conductivity was obtained for the coatings formed from Ni@Ag NPs with the thicker Ag shell; moreover, thicker shells allowed a lowering of sintering temperature due to higher conductivity and a lower melting point of silver in comparison to nickel NPs.

Inhibitory impact of MgO nanoparticles on oxidative stress and other physiological attributes of spinach plant grown under field condition

Green synthesis of NPs is preferred due to its eco-friendly procedures and non-toxic end products. However, unintentional release of NPs can lead to environmental pollution affecting living organisms including plants. NPs accumulation in soil can affect the agricultural sustainability and crop production. In this context, we report the morphological and biochemical response of spinach nanoprimed with MgO-NPs at concentrations, 10, 50, 100, and 150 µg/ml. Nanopriming reduced the spinach root length by 14-26%, as a result a reduction of 20-74% in the length of spinach shoots was observed. The decreased spinach shoot length inhibited the chlorophyll accumulation by 21-55%, thus reducing the accumulation of carbohydrates and yield by 46 and 49%, respectively. The reduced utilization of the total absorbed light further enhanced ROS generation and oxidative stress by 32%, thus significantly altering their antioxidant system. Additionally, a significant variation in the accumulation of flavonoid pathway downstream metabolites myricitin, rutin, kaempferol-3 glycoside, and quercitin was also revealed on MgO-NPs nanopriming. Additionally, NPs enhanced the protein levels of spinach probably as an osmoprotectant to regulate the oxidative stress. However, increased protein precipitable tannins and enhanced oxidative stress reduced the protein digestibility and solubility. Overall, MgO-NPs mediated oxidative stress negatively affected the growth, development, and yield of spinach in fields in a concentration dependent manner.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12298-023-01391-9.

Multifactorial role of nanoparticles in alleviating environmental stresses for sustainable crop production and protection

In the era of dire environmental fluctuations, plants undergo several stressors during their life span, which severely impact their development and overall growth in negative aspects. Abiotic stress factors, especially moisture stress i.e shortage (drought) or excess (flooding), salinity, temperature divergence (i.e. heat and cold stress), heavy metal toxicity, etc. create osmotic and ionic imbalance inside the plant cells, which ultimately lead to devastating crop yield, sometimes crop failure. Apart from the array of abiotic stresses, various biotic stress caused by pathogens, insects, and nematodes also affect production. Therefore, to combat these major challenges in order to increase production, several novel strategies have been adapted, among which the use of nanoparticles (NPs) i.e. nanotechnology is becoming an emerging tool in various facets of the current agriculture system, nowadays. This present review will elaborately depict the deployment and mechanisms of different NPs to withstand these biotic and abiotic stresses, along with a brief overview and indication of the future research works to be oriented based on the steps provided for future research in advance NPs application through the sustainable way.

Uptake, accumulation, toxicity, and interaction of metallic-based nanoparticles with plants: current challenges and future perspectives

The rapid development of industrialization is causing several fundamental problems in plants due to the interaction between plants and soil contaminated with metallic nanoparticles (NPs). Numerous investigations have been conducted to address the severe toxic effects caused by nanoparticles in the past few decades. Based on the composition, size, concentration, physical and chemical characteristics of metallic NPs, and plant types, it enhances or lessens the plant growth at various developmental stages. Metallic NPs are uptaken by plant roots and translocated toward shoots via vascular system based on composition, size, shape as well as plant anatomy and cause austere phytotoxicity. Herein, we tried to summarize the toxicity induced by the uptake and accumulation of NPs in plants and also we explored the detoxification mechanism of metallic NPs adopted by plants via using different phytohormones, signaling molecules, and phytochelatins. This study was intended to be an unambiguous assessment including current knowledge on NPs uptake, accumulation, and translocation in higher plants. Furthermore, it will also provide sufficient knowledge to the scientific community to understand the metallic NPs-induced inhibitory effects and mechanisms involved within plants.

Valorization of Baker Yeast Industry Waste in Agriculture by Improving Germination and Growth of Barley and Pea

Industrial waste still present an environmental danger for the nature and survival of all living beings. Among these toxic products, the focus has been on liquid effluents from the baker's yeast industry that cause real environmental problems mainly due to their pollutant load and the release of unpleasant odors. In order to minimize these hazards and to take advantage of these wastes for the sake of our environment, the present work consists on valorizing effluents from the baker's yeast industry on barley (Hordeum vulgare) and pea (Pisum sativum), two important agricultural products of Tunisian north-west. Results showed that this waste is characterized by its richness in organic matter, and the presence of proteins traces with high chemical and biochemical oxygen demand (COD and BOD5) values. Diluted effluent at a dose of 2.5 mg/g significantly improves germination of both plant seeds by germination index (GI) calculation, to reach a maximum of 190 ± 17% and 150 ± 14% for barley and pea, respectively. In fertigation experiment, the use of a lower dose of .62 mg/g of diluted effluent promotes plant length to reach 52 ± 4 cm and 45 ± 1.4 cm, respectively, for H. vulgare and P. sativum. Gas chromatography coupled to mass spectrometry (GC-MS) analysis after derivatization showed significant enhancement of auxin production in pea treated with .62 mg/g of cream compared to control with a concentration of 10.60 ± .81 and 8.16 ± .43 ng/gFW, respectively. In another experiment, the irrigation of pea plants with furfural, as major compound of cream, promotes length and auxin production to reach 9.89 ± .56 ng/gFW for a furfural dose of .31 mg/g. This leads us to valorize baker's yeast effluent as an environment-friendly natural product in pea and barley agricultural and give insight to its mode of action.

Human and environmental impacts of nanoparticles: a scoping review of the current literature

Use of nanoparticles have established benefits in a wide range of applications, however, the effects of exposure to nanoparticles on health and the environmental risks associated with the production and use of nanoparticles are less well-established. The present study addresses this gap in knowledge by examining, through a scoping review of the current literature, the effects of nanoparticles on human health and the environment. We searched relevant databases including Medline, Web of Science, ScienceDirect, Scopus, CINAHL, Embase, and SAGE journals, as well as Google, Google Scholar, and grey literature from June 2021 to July 2021. After removing duplicate articles, the title and abstracts of 1495 articles were first screened followed by the full-texts of 249 studies, and this resulted in the inclusion of 117 studies in the presented review.In this contribution we conclude that while nanoparticles offer distinct benefits in a range of applications, they pose significant threats to humans and the environment. Using several biological models and biomarkers, the included studies revealed the toxic effects of nanoparticles (mainly zinc oxide, silicon dioxide, titanium dioxide, silver, and carbon nanotubes) to include cell death, production of oxidative stress, DNA damage, apoptosis, and induction of inflammatory responses. Most of the included studies (65.81%) investigated inorganic-based nanoparticles. In terms of biomarkers, most studies (76.9%) used immortalised cell lines, whiles 18.8% used primary cells as the biomarker for assessing human health effect of nanoparticles. Biomarkers that were used for assessing environmental impact of nanoparticles included soil samples and soybean seeds, zebrafish larvae, fish, and Daphnia magna neonates.From the studies included in this work the United States recorded the highest number of publications (n = 30, 25.64%), followed by China, India, and Saudi Arabia recording the same number of publications (n = 8 each), with 95.75% of the studies published from the year 2009. The majority of the included studies (93.16%) assessed impact of nanoparticles on human health, and 95.7% used experimental study design. This shows a clear gap exists in examining the impact of nanoparticles on the environment.

Enhanced edible plant production using nano-manganese and nano-iron fertilizers: Current status, detection methods and risk assessment

BACKGROUND

Nanotechnology offers many benefits in the globally important field of food production and human nutrition, particularly by implementing agricultural nanoproducts. Of these, edible plant fertilizers enriched with nanosized forms of essential metals, Mn and Fe, are growing in importance with the advantages of enhanced action on plant roots.

SCOPE AND APPROACH

This review focuses on the importance of tracking the bioaccumulation and biodistribution of these pertinent nanofertilizers. An emphasis is given to the critical analysis of the state-of-the-art analytical strategies to examine the Mn and Fe nanoparticles in edible plant systems as well as to shedding light on the vast gap in the methodologies dedicated to the speciation, in vitro simulation, and safety testing of these promising nanomaterials. Also provided are guidances for the food chemists and technologists on the lights and shadows of particular analytical approaches as a matter of authors' expertise as analytical chemists.

KEY FINDINGS AND CONCLUSIONS

While the use of nanotechnology in agriculture seems to be growing increasingly, there is still a lack of analytical methodologies capable of investigating novel Mn- and Fe-based nanomaterials as potential fertilizers. Only the advent of reliable analytical tools in the field could bridge the gaps in our knowledge about processes in which those materials participate in the plant systems and their effects on crop production and quality of the produced food.

Nanoparticles: The Plant Saviour under Abiotic Stresses

Climate change significantly affects plant growth and productivity by causing different biotic and abiotic stresses to plants. Among the different abiotic stresses, at the top of the list are salinity, drought, temperature extremes, heavy metals and nutrient imbalances, which contribute to large yield losses of crops in various parts of the world, thereby leading to food insecurity issues. In the quest to improve plants' abiotic stress tolerance, many promising techniques are being investigated. These include the use of nanoparticles, which have been shown to have a positive effect on plant performance under stress conditions. Nanoparticles can be used to deliver nutrients to plants, overcome plant diseases and pathogens, and sense and monitor trace elements that are present in soil by absorbing their signals. A better understanding of the mechanisms of nanoparticles that assist plants to cope with abiotic stresses will help towards the development of more long-term strategies against these stresses. However, the intensity of the challenge also warrants more immediate approaches to mitigate these stresses and enhance crop production in the short term. Therefore, this review provides an update of the responses (physiological, biochemical and molecular) of plants affected by nanoparticles under abiotic stress, and potentially effective strategies to enhance production. Taking into consideration all aspects, this review is intended to help researchers from different fields, such as plant science and nanoscience, to better understand possible innovative approaches to deal with abiotic stresses in agriculture.

Biocontrol potential of mycogenic copper oxide nanoparticles against Alternaria brassicae

The biological synthesis of nanoparticles using fungal cultures is a promising and novel tool in nano-biotechnology. The potential culture of Trichoderma asperellum (T. asperellum) has been used to synthesize copper oxide nanoparticles (CuO NPs) in the current study. The necrotrophic infection in Brassica species is caused due to a foliar pathogen Alternaria brassicae (A. brassicae). Mycogenic copper oxide nanoparticles (M-CuO NPs) were characterized by spectroscopic and microscopic techniques such as UV–visible spectrophotometry (UV–vis), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The antifungal potential of CuO NPs was studied against A. brassicae. M-CuO NPs exhibited a surface plasmon resonance (SPR) at 303 nm, and XRD confirmed the crystalline phase of NPs. FTIR spectra confirmed the stretching of amide bonds, and the carbonyl bond indicated the presence of enzymes in T. asperellum filtrate. SEM and TEM confirmed the spherical shape of M-CuO NPs with an average size of 22 nm. Significant antifungal potential of M-CuO NPs was recorded, as it inhibited the growth of A. brassicae up to 92.9% and 80.3% in supplemented media with C-CuO NPs at 200 ppm dose. Mancozeb and propiconazole inhibited the radial growth up to 38.7% and 44.2%. SEM confirmed the morphological changes in hyphae and affected the sporulation pattern. TEM revealed hardly recognizable organelles, abnormal cytoplasmic distribution, and increased vacuolization, and light microscopy confirmed the conidia with reduced diameter and fewer septa after treatment with both types of NPs. Thus, M-CuO NPs served as a promising alternative to fungicides.

Effects of Zinc, Copper and Iron Oxide Nanoparticles on Induced DNA Methylation, Genomic Instability and LTR Retrotransposon Polymorphism in Wheat (Triticum aestivum L.)

Nanomaterials with unique and diverse physico-chemical properties are used in plant science since they improve plant growth and development and offer protection against biotic and abiotic stressors. Previous studies have explored the effects of such nanomaterials on different plant mechanisms, but information about the effects of nanomaterials on induced DNA methylation, genomic instability and LTR retrotransposon polymorphism in wheat is lacking. Therefore, the present study highlights the key role of nanoparticles in DNA methylation and polymorphism in wheat by investigating the effects of ZnO, CuO and γ-Fe3O4 nanoparticles (NPs) on mature embryo cultures of wheat (Triticum aestivum L.). Nanoparticles were supplemented with Murashige and Skoog (MS) basal medium at normal (1X), double (2X) and triple (3X) concentrations. The findings revealed different responses to the polymorphism rate depending on the nanoparticle type and concentration. Genomic template stability (GTS) values were used to compare the changes encountered in iPBS profiles. ZnO, CuO and γ-Fe3O4 NPs increased the polymorphism rate and cytosine methylation compared to the positive control while reducing GTS values. Moreover, non-γ-Fe3O4 NPs treatments and 2X ZnO and CuO NP treatments yielded higher polymorphism percentages in both MspI- and HpaII-digested CRED-iPBS assays and were thus classified as hypermethylation when the average polymorphism percentage for MspI digestion was considered. On the other hand, the 3X concentrations of all nanoparticles decreased HpaII and MspI polymorphism percentages and were thus classified as hypomethylation. The findings revealed that MS medium supplemented with nanoparticles had epigenetic and genotoxic effects.

Silicon nanoparticles decrease arsenic translocation and mitigate phytotoxicity in tomato plants

In this study, we simulate the irrigation of tomato plants with arsenic (As)-contaminated water (from 0 to 3.2 mg L^-1) and investigate the effect of the application of silicon nanoparticle (Si NPs) in the form of silicon dioxide (0, 250, and 1000 mg L^-1) on As uptake and stress. Arsenic concentrations were determined in substrate and plant tissue at three different stratums. Phytotoxicity, As accumulation and translocation, photosynthetic pigments, and antioxidant activity of enzymatic and non-enzymatic compounds were also determined. Our results show that irrigation of tomato plants with As-contaminated water caused As substrate enrichment and As bioaccumulation (roots > leaves > steam), showing that the higher the concentration in irrigation water, the farther As translocated through the different tomato stratums. Additionally, phytotoxicity was observed at low concentrations of As, while tomato yield increased at high concentrations of As. We found that application of Si NPs decreased As translocation, tomato yield, and root biomass. Increased production of photosynthetic pigments and improved enzymatic activity (CAT and APX) suggested tomato plant adaptation at high As concentrations in the presence of Si NPs. Our results reveal likely impacts of As and nanoparticles on tomato production in places where As in groundwater is common and might represent a risk.

Titanium and Zinc Based Nanomaterials in Agriculture: A Promising Approach to Deal with (A)biotic Stresses?

Abiotic stresses, such as those induced by climatic factors or contaminants, and biotic stresses prompted by phytopathogens and pests inflict tremendous losses in agriculture and are major threats to worldwide food security. In addition, climate changes will exacerbate these factors as well as their negative impact on crops. Drought, salinity, heavy metals, pesticides, and drugs are major environmental problems that need deep attention, and effective and sustainable strategies to mitigate their effects on the environment need to be developed. Besides, sustainable solutions for agrocontrol must be developed as alternatives to conventional agrochemicals. In this sense, nanotechnology offers promising solutions to mitigate environmental stress effects on plants, increasing plant tolerance to the stressor, for the remediation of environmental contaminants, and to protect plants against pathogens. In this review, nano-sized TiO₂ (nTiO₂) and ZnO (nZnO) are scrutinized, and their potential to ameliorate drought, salinity, and xenobiotics effects in plants are emphasized, in addition to their antimicrobial potential for plant disease management. Understanding the level of stress alleviation in plants by these nanomaterials (NM) and relating them with the application conditions/methods is imperative to define the most sustainable and effective approaches to be adopted. Although broad-spectrum reviews exist, this article provides focused information on nTiO₂ and nZnO for improving our understanding of the ameliorative potential that these NM show, addressing the gaps in the literature.

In vitro exposed magnesium oxide nanoparticles enhanced the growth of legume Macrotyloma uniflorum

Nanoparticles interact with plants to induce a positive, negative, or neutral effect on their growth and development. In this study, we document the positive influence of magnesium oxide (MgO) nanoparticles (NPs) on the morpho-biochemical parameters of Macrotyloma uniflorum (horse gram). Horse gram is a protein and polyphenol-rich legume crop. It is an important part of the human diet and nutrition. When exposed to MgO-NPs, a significant increment in the shoot-root length, fresh biomass, and chlorophyll content of horse gram was evident. Furthermore, there was a 4-20 and 18-127% increase in the accumulation of carbohydrate and protein content on MgO-NP exposure. The antioxidant potential was enhanced by 5-19% on NP treatment as a result of the increase in the accumulation of total polyphenolics. Total phenols and flavonoids were enhanced by 7-20 and 50-84% in the presence of MgO-NPs. The enzyme activity of SOD, CAT, and APX was also enhanced in MgO-NP-exposed horse gram. The observed alterations were also justified by the Pearson correlation. Overall, the MgO-NP-induced morpho-biochemical alterations in horse gram indicated their probable role as a nano-fertilizer. However, it further warrants the need to extensively investigate the responses of various other plant types to MgO-NPs before industry scale application.

Interactions of nanoparticles and salinity stress at physiological, biochemical and molecular levels in plants: A review

Salinity stress is one of the most destructive non-biological stresses in plants that has adversely affected many agricultural lands in the world. Salinity stress causes many morphological, physiological, epigenetic and genetic changes in plants by increasing sodium and chlorine ions in the plant cells. The plants can alleviate this disorder to some extent through various mechanisms and return the cell to its original state, but if the salt dose is high, the plants may not be able to provide a proper response and can die due to salt stress. Nowadays, scientists have offered many solutions to this problem. Nanotechnology is one of the most emerging and efficient technologies that has been entered in this field and has recorded very brilliant results. Although some studies have confirmed the positive effects of nontechnology on plants under salinity stress, there is no the complete understanding of the relationship and interaction of nanoparticles and intracellular mechanisms in the plants. In the review paper, we have tried to reach a conclusion from the latest articles that how NPs could help salt-stressed plants to recover their cells under salt stress so that we can take a step towards clearing the existing ambiguities for researchers in this field.

Guiding the design space for nanotechnology to advance sustainable crop production

The globally recognized need to advance more sustainable agriculture and food systems has motivated the emergence of transdisciplinary solutions, which include methodologies that utilize the properties of materials at the nanoscale to address extensive and inefficient resource use. Despite the promising prospects of these nanoscale materials, the potential for large-scale applications directly to the environment and to crops necessitates precautionary measures to avoid unintended consequences. Further, the effects of using engineered nanomaterials (ENMs) in agricultural practices cascade throughout their life cycle and include effects from upstream-embodied resources and emissions from ENM production as well as their potential downstream environmental implications. Building on decades-long research in ENM synthesis, biological and environmental interactions, fate, transport and transformation, there is the opportunity to inform the sustainable design of nano-enabled agrochemicals. Here we perform a screening-level analysis that considers the system-wide benefits and costs for opportunities in which ENMs can advance the sustainability of crop-based agriculture. These include their on-farm use as (1) soil amendments to offset nitrogen fertilizer inputs, (2) seed coatings to increase germination rates and (3) foliar sprays to enhance yields. In each analysis, the nano-enabled alternatives are compared against the current practice on the basis of performance and embodied energy. In addition to identifying the ENM compositions and application approaches with the greatest potential to sustainably advance crop production, we present a holistic, prospective, systems-based approach that promotes emerging alternatives that have net performance and environmental benefits.

TiO2 nanoparticles in a biosolid-amended soil and their implication in soil nutrients, microorganisms and Pisum sativum nutrition

The wide use of nanoparticles (NPs), gives concern about their possible negative implications in the environment and living organisms. In particular, titanium dioxide (TiO2) NPs are accumulated in biosolids (Bs) coming from wastewater treatment plants, which in turn are used as farm soil amendments and are becoming an important way of NPs entrance in the terrestrial ecosystems. In this study, to simulate a low and cumulative load of TiO2 NPs, 80 and 800 mg TiO2per Kg of soil were spiked in the Bs prior to its addition to soil. The effects of different crystal phases of TiO2 NPs (pure anatase and pure rutile or their mixture) and their non-coated bulk counterparts (larger particles) on the availability of mineral nutrients and on the status of the bacterial communities together with the nutritional status of Pisum sativum L. plants were evaluated. Results showed the reduction, to different extents, on the availability of important soil mineral nutrients (e.g. Mn 65%, Fe 20%, P 27%, averagely), in some cases size- (e.g. P) and dose-dependent. Bacterial biodiversity was also affected by the presence of high TiO2 dose in soil. The mineral nutrition of pea plants was also altered, showing the main reduction in Mn (80% in the roots and 50% in the shoots), K, Zn, P (respectively, 80, 40, and 35% in the roots), and an increase of N in the shoots, with possible consequences on the quality of the crop. The present study gives new integrated data on the effects of TiO2 NPs in the soil-plant system, on the soil health and on the nutritional quality of crops, rising new implications for future policies and human health.

An Assessment of the Effect of Green Synthesized Silver Nanoparticles Using Sage Leaves (Salvia officinalis L.) on Germinated Plants of Maize (Zea mays L.)

AgNPs have attracted considerable attention in many applications including industrial use, and their antibacterial properties have been widely investigated. Due to the green synthesis process employed, the nanoparticle surface can be coated with molecules with biologically important characteristics. It has been reported that increased use of nanoparticles elevates the risk of their release into the environment. However, little is known about the behaviour of AgNPs in the eco-environment. In this study, the effect of green synthesized AgNPs on germinated plants of maize was examined. The effects on germination, basic growth and physiological parameters of the plants were monitored. Moreover, the effect of AgNPs was compared with that of Ag(I) ions in the form of AgNO₃ solution. It was found that the growth inhibition of the above-ground parts of plants was about 40%, and AgNPs exhibited a significant effect on photosynthetic pigments. Significant differences in the following parameters were observed: weights of the caryopses and fresh weight (FW) of primary roots after 96 h of exposure to Ag(I) ions and AgNPs compared to the control and between Ag compounds. In addition, the coefficient of velocity of germination (CVG) between the control and the AgNPs varied and that between the Ag(I) ions and AgNPs was also different. Phytotoxicity was proved in the following sequence: control < AgNPs < Ag(I) ions.

Zinc oxide nanoparticles alleviate drought-induced alterations in sorghum performance, nutrient acquisition, and grain fortification

Drought is a major environmental event affecting crop productivity and nutritional quality, and potentially, human nutrition. This study evaluated drought effects on performance and nutrient acquisition and distribution in sorghum; and whether ZnO nanoparticles (ZnO-NPs) might alleviate such effects. Soil was amended with ZnO-NPs at 1, 3, and 5 mg Zn/kg, and drought was imposed 4 weeks after seed germination by maintaining the soil at 40% of field moisture capacity. Flag leaf and grain head emergence were delayed 6-17 days by drought, but the delays were reduced to 4-5 days by ZnO-NPs. Drought significantly (p < 0.05) reduced (76%) grain yield; however, ZnO-NP amendment under drought improved grain (22-183%) yield. Drought inhibited grain nitrogen (N) translocation (57%) and total (root, shoot and grain) N acquisition (22%). However, ZnO-NPs (5 mg/kg) improved (84%) grain N translocation relative to the drought control and restored total N levels to the non-drought condition. Shoot uptake of phosphorus (P) was promoted (39%) by drought, while grain P translocation was inhibited (63%); however, ZnO-NPs lowered total P acquisition under drought by 11-23%. Drought impeded shoot uptake (45%), grain translocation (71%) and total acquisition (41%) of potassium (K). ZnO-NP amendment (5 mg/kg) to drought-affected plants improved total K acquisition (16-30%) and grain K (123%), relative to the drought control. Drought lowered (32%) average grain Zn concentration; however, ZnO-NP amendments improved (94%) grain Zn under drought. This study represents the first evidence of mitigation of drought stress in full-term plants solely by exposure to ZnO-NPs in soil. The ability of ZnO-NPs to accelerate plant development, promote yield, fortify edible grains with critically essential nutrients such as Zn, and improve N acquisition under drought stress has strong implications for increasing cropping systems resilience, sustaining human/animal food/feed and nutrition security, and reducing nutrient losses and environmental pollution associated with N-fertilizers.

Addition-omission of zinc, copper, and boron nano and bulk oxide particles demonstrate element and size -specific response of soybean to micronutrients exposure

Plant response to microelements exposure can be modulated based on particle size. However, studies are lacking on the roles of particle size and specific microelements in mixed exposure systems designed for plant nutrition, rather than toxicology. Here, an addition-omission strategy was used to address particle-size and element-specific effects in soybean exposed to a mixture of nano and bulk scale oxide particles of Zn (2 mg Zn/kg), Cu (1 mg Cu/kg) and B (1 mg B/kg) in soil. Compared to the control, mixtures of oxide particles of both sizes significantly (p < 0.05) promoted grain yield and overall (shoot and grain) Zn accumulation, but suppressed overall P accumulation. However, the mixed nano-oxides, but not the mixed bulk-oxides, specifically stimulated shoot growth (47%), flower formation (63%), shoot biomass (34%), and shoot N (53%) and K (42%) accumulation. Compared by particle size, omission of individual elements from the mixtures evoked significant responses that were nano or bulk-specific, including shoot growth promotion (29%) by bulk-B; inhibition (51%) of flower formation by nano-Cu; stimulation (57%) of flower formation by bulk-B; grain yield suppression (40%) by nano-Zn; B uptake enhancement (34%) by bulk-Cu; P uptake stimulation by nano-Zn (14%) or bulk-B (21%); residual soil N (80%) and Zn (42%) enhancement by nano-Cu; and residual soil Cu enhancement by nano-Zn (72%) and nano-B (62%). Zn was responsible for driving the agronomic (biomass and grain yield) responses in this soil, with concurrent ramifications for environmental management (N and P) and human health (Zn nutrition). Overall, compared to bulk microelements, nanoscale microelements played a greater role in evoking plant responses.

Green-synthesized copper nanoparticles as a potential antifungal against plant pathogens

The fabrication of fungicides in cost-effective and eco-friendly ways is particularly important for agriculture. Plant pathogenic fungi produce many economic and ecological problems worldwide, which must be controlled with potent fungicides. Here we propose the green synthesis of fungicides, which consist of copper nanoparticles (Cu-NPs) prepared in aqueous media. Through in vitro experiments, the antifungal efficacy against Fusarium solani, Neofusicoccum sp., and Fusarium oxysporum was investigated. Although the antifungal activity differs for each fungal species, it was found that the Cu-NPs induce strong morphological changes in the mycelium. Additionally, the damage of the cell membranes of the pathogens was revealed by microscopic observations. For the three evaluated fungi, fluorescence microscopy demonstrated the intracellular generation of reactive oxygen species in the mycelium. This work proves that the green-synthesized Cu-NPs are potential fungicides against F. solani, Neofusicoccum sp., and F. oxysporum.

The fabrication of fungicides in cost-effective and eco-friendly ways is particularly important for agriculture.

Different forms of copper and kinetin impacted element accumulation and macromolecule contents in kidney bean (Phaseolus vulgaris) seeds

The relationship between engineered nanomaterials and plant biostimulants is unclear. In this study, kidney bean (Phaseolus vulgaris) plants were grown to maturity (90 days) in soil amended with nano copper (nCu), bulk copper (bCu), or copper chloride (CuCl₂) at 0, 50, or 100 mg kg^-1, then watered with 0, 10, or 100 μM of kinetin (KN). Seeds were harvested and analyzed via ICP-OES and biochemical assays. While seed production was largely unaffected, nutritional value was significantly impacted. Accumulation of Cu was enhanced by 5-10% from controls by Cu-based treatments. Fe was the only macro/microelement significantly altered by nCu, which was ~29% lower than seeds from untreated plants. All forms of Cu combined with 10 μM KN reduced Mg from 9 to 12%. Application of KN plus bCu or CuCl₂ elevated concentrations of Mn (31-41%) and S (19-22%), respectively. Protein content of seeds was stimulated (11-12%) by bCu, on average, and depressed by CuCl₂ + KN (up to 22%). Variations in sugar and starch content were insignificant, compared to controls. Our results indicate that the interaction Cu × KN significantly altered the nutritional value of common beans, which has potential implications to agricultural practices incorporating Cu as either a pesticide or fertilizer.

Effects of Manganese Nanoparticle Exposure on Nutrient Acquisition in Wheat (Triticum aestivum L.)

Nanoparticles are used in a variety of products, including fertilizer-nutrients and agro-pesticides. However, due to heightened reactivity of nano-scale materials, the effects of nanoparticle nutrients on crops can be more dramatic when compared to non nano-scale nutrients. This study evaluated the effect of nano manganese-(Mn) on wheat yield and nutrient acquisition, relative to bulk and ionic-Mn. Wheat was exposed to the Mn types in soil (6 mg/kg/plant), and nano-Mn was repeated in foliar application. Plant growth, grain yield, nutrient acquisition, and residual soil nutrients were assessed. When compared to the control, all Mn types significantly (p < 0.05) reduced shoot N by 9–18%. However, nano-Mn in soil exhibited other subtle effects on nutrient acquisition that were different from ionic or bulk-Mn, including reductions in shoot Mn (25%), P (33%), and K (7%) contents, and increase (30%) in soil residual nitrate-N. Despite lowering shoot Mn, nano-Mn resulted in a higher grain Mn translocation efficiency (22%), as compared to salt-Mn (20%), bulk-Mn (21%), and control (16%). When compared to soil, foliar exposure to nano-Mn exhibited significant differences: greater shoot (37%) and grain (12%) Mn contents; less (40%) soil nitrate-N; and, more soil (17%) and shoot (43%) P. These findings indicate that exposure to nano-scale Mn in soil could affect plants in subtle ways, differing from bulk or ionic-Mn, suggesting caution in its use in agriculture. Applying nano Mn as a foliar treatment could enable greater control on plant responses.

Nanofertilizers: New Products for the Industry?

Mineral fertilizers are key to food production, despite plant low nutrient uptake efficiencies and high losses. However, nanotechnology can both enhance crop productivity and reduce nutrient losses. This has raised interest in nanoscale and nanoenabled bulk fertilizers, hence the concept of nanofertilizers. Nevertheless, large-scale industrial production of nanofertilizers is yet to be realized. Here, we highlight the science-based evidence and outstanding concerns for motivating fertilizer industry production of nanofertilizers, including the notion of toxicity associated with nanoscale materials; scant nanofertilizer research with key crop nutrients; inadequacy of soil- or field-based studies with nanofertilizers; type of nanomaterials to produce as fertilizers; how to efficiently and effectively apply nanofertilizers at the field scale; and the economics of nanofertilizers. It is anticipated that the development and validation of nanofertilizers that are nondisruptive to existing bulk fertilizer production systems will motivate the industry's involvement in nanofertilizers.

Uptake, transportation, and accumulation of C60 fullerene and heavy metal ions (Cd, Cu, and Pb) in rice plants grown in an agricultural soil

The mutual influences of C₆₀ fullerene (C₆₀) and heavy metal ions (Cd, Cu, and Pb) on the uptake, transportation, and accumulation of these coexisting pollutants in four rice cultivars planted in agricultural soil were investigated during the whole life cycle of rice. The biomass of the rice plants was not affected significantly by the presence of C₆₀. C₆₀ exposure exerted different impacts on the bioaccumulation of Cd, Cu, and Pb in various rice tissues. For example, the bioaccumulation of Cd in rice 9311 panicles was significantly decreased (p < .05) when it was exposed to 1000 mg/kg C₆₀, whereas the changes of Cu and Pb levels in panicles were not statistically significant. C₆₀ was absorbed by rice roots and transported to the stems and panicles, and it tended to form aggregates in rice tissues. C₆₀ concentrations in the roots, stems, and panicles of the four rice cultivars that were harvested after a 130-day exposure to 600 mg/kg C₆₀ were 40-292, 4.4-24.5 and 0.077-1.2 mg/kg (dry weight), respectively. C₆₀ and heavy metal ions exhibited different uptake and transportation mechanisms, which depended on the rice cultivar, soil heavy metal ion concentration, and C₆₀ exposure time and concentration. For example, the average C₆₀ in the four rice cultivars was increased sharply, from 47.4 to 196.3 mg/kg from the tillering to booting stages, whereas Cd levels increased only slightly, from 23.1 to 25.9 mg/kg. The study demonstrated that the bioaccumulation of C₆₀ and heavy metal ions under co-contamination scenario differs from under single contaminant. The accumulation of C₆₀ in rice panicles may increase the concern of food safety.

Phytotoxicity of silver nanoparticles to Lemna minor: Surface coating and exposure period-related effects

Silver nanoparticles (Ag NPs) exponential production raises concern about their environmental impact. The effects of Ag NPs to aquatic plants remain scarcely studied, especially in extended exposures. This paper aims to evaluate Ag NPs effects in Lemna minor at individual and sub-individual levels, focusing on three variables: Ag form (NPs versus ions - Ag⁺), NPs surface coating (citrate vs polyvinylpyrrolidone - PVP) and exposure period (7 vs 14days). Endpoints were assessed at individual level (specific growth rate, chlorosis incidence and number of fronds per colony) and sub-individual level (enzymatic activities of catalase (CAT), guaiacol peroxidase (GPx) and glutathione-S-transferase (GST)). Generally, plants exposed to all Ag forms underwent decays on growth rate and fronds per colony, and increases on chlorosis, GPX and GST, but no effects on CAT. The most sensitive endpoints were specific growth rate and GPx activity, showing significant effects down to 0.05mg/L for Ag NPs and 3μg/L for Ag⁺, after 14days. Ag⁺ showed higher toxicity with a 14d-EC₅₀ of 0.0037mg Ag/L. Concerning surface coating, PVP-Ag NPs were more deleterious on growth rate and fronds per colony, whereas citrate-Ag NPs affected more the chlorosis incidence and GPx and GST activities. The exposure period significantly affected chlorosis: 14days triggered a chlorosis increase in Ag⁺-exposed plants and a decrease in Ag NPs-exposed plants when compared to 7days. Ag NPs induced an oxidative stress status in cells, thus ensuing upregulated enzymatic activity as a self-defense mechanism. Since Ag NPs dissolution might occur on a steady and continuous mode along time, and the average longevity of fronds, we propose longer exposures periods than the recommended by the OECD guideline. This approach would provide more relevant and holistic evidences on the overall response of freshwater plants to Ag NPs in an ecological relevant scenario.

Morphological, proteomic and metabolomic insight into the effect of cerium dioxide nanoparticles to Phaseolus vulgaris L. under soil or foliar application

Chemically synthesized nanoparticles (NPs) are widely used in industry and concern over their impact on the environment is rising. In this study, greenhouse grown bean (Phaseolus vulgaris L.) plants were treated with CeO₂ NPs suspensions at 0, 250, 500, 1000, and 2000mgL^-1 either aerially by spraying or via soil application. At 15days after treatment, plants were analyzed for Ce uptake, morphological and biochemical assays, as well as high-resolution mass spectrometry based metabolomics and proteomics. The results from ICP-MS assays showed a dose dependent absorption, uptake and translocation of Ce through both roots and leaves; Ce content increased from 0.68 up to 1894mgkg^-1 following spray application, while concentrations were three orders lower following soil application (0.59 to 2.19mgkg^-1). Electrolyte leakage increased with NPs rate, from 25.2% to 70.3% and from 24.8% to 32.9% following spray and soil application, respectively. Spraying lowered stomatal density (from 337 to 113 per mm²) and increased stomatal length (from 12.8 to 19.4μm), and altered photosynthesis and electron transport chain biochemical machinery. The increase in Ce content induced accumulation of osmolites (proline increased from 0.54 to 0.65mg/g under spray application), phytosiderophores (muconate and mugineate compounds showed increase fold-changes >16) and proteins involved in folding or turnover. NPs application induced membrane damage, as evidenced by the increase in membrane lipids degradates and by the increase in electrolyte leakage, and caused oxidative stress. Most of the responses were not linear but dose-dependent, whereas metabolic disruption is expected at the highest NPs dosage. Both proteomics and metabolomics highlighted a stronger effect of CeO₂ NPs spraying, as compared to soil application. High concentrations of NPs in the environment have been confirmed to pose toxicity concern towards plants, although important differences could be highlighted between aerial deposition and soil contamination.

Nanoparticle and Ionic Zn Promote Nutrient Loading of Sorghum Grain under Low NPK Fertilization

This study evaluated the effects of ZnO nanoparticles (NP) or Zn salt amendment on sorghum yield, macronutrient use efficiency, and grain Zn-enrichment. Amendments were through soil and foliar pathways, under "low" and "high" levels of nitrogen, phosphorus, and potassium (NPK). In soil and foliar amendments, grain yield was significantly (p ≤ 0.05) increased by both Zn types, albeit insignificantly with soil-applied Zn at low NPK. Across NPK levels and Zn exposure pathways, both Zn types increased N and K accumulation relative to control plants. Compared to N and K, both Zn types had a mixed effect on P accumulation, depending on NPK level and Zn exposure pathway, and permitted greater soil P retention. Both Zn types significantly (p ≤ 0.05) increased grain Zn content, irrespective of exposure pathway. These findings suggest a nanoenabled strategy for enhancing crop productivity, grain nutritional quality, and N use efficiency based on Zn micronutrient amendments, with potential implications for improved human and environmental health.