Remediation of aged diesel contaminated soil by alkaline activated persulfate

Analyzing atmospheric plasma's potential for diesel soil remediation: Insightful mechanisms

The remediation of diesel-contaminated soil is a critical environmental concern, driving the need for effective solutions. Recently, the methodology of Non-thermal Atmospheric Plasma (NTAP) technology, which is equipped with a Dielectric Barrier Discharge (DBD) electrode and has become a feasible approach, was proven to be viable. The reactive species from the plasma were exposed to the contaminated soil in this investigation using the NTAP technique. The reacted soil was then extracted using dichloromethane, and the amount of Total Petroleum Hydrocarbon (TPH) removed was assessed. Investigation into varying power levels, treatment durations, and hydrogen peroxide integration revealed significant findings. With an initial concentration of 3086 mg of diesel/kg of soil and a pH of 5.0, 83% of the diesel was removed from the soil at 150 W in under 20 min. Extended exposure to NTAP further improved removal rates, highlighting the importance of treatment duration optimization. Additionally, combining hydrogen peroxide (H2O2) with NTAP enhanced removal efficiency by facilitating diesel breakdown. This synergy offers a promising avenue for comprehensive soil decontamination. Further analysis considered the impact of soil characteristics on removal efficacy. Mechanistically, NTAP generates reactive species that degrade diesel into less harmful compounds, aiding subsequent removal. Overall, NTAP advances environmental restoration efforts by offering a quick, economical, and environmentally benign method of remediating diesel-contaminated soil especially when used in tandem with hydrogen peroxide.

Degradation of humic acid by UV/PMS: process comparison, influencing factors, and degradation mechanism

In natural water bodies, humic acid (HA), generated during the chlorination disinfection process at water treatment plants, can produce halogenated disinfection by-products, increasing the risk to drinking water safety and posing a threat to human health. Effectively removing HA from natural waters is a critical focus of environmental research. This study established a synergistic ultraviolet/peroxymonosulfate (UV/PMS) system to remove HA from water. It compared the efficacy of various UV/advanced oxidation processes (AOPs) on HA degradation, and assessed the influence of different water sources, initial pH, oxidant concentration, and anions (HCO3 -, Cl-, NO3 -) on HA degradation. The degradation mechanism of HA by the UV/PMS process was also investigated. Results showed that under the conditions of 3 mmol L-1 PMS concentration, 10 mg L-1 HA concentration, initial solution pH of 7, and a reaction time of 240 minutes, the mineralization rate of HA by UV/PMS reached 94.15%. The pseudo-first-order kinetic constant (k obs) was 0.01034 and the single-electric energy (EE/O) was 0.0157 kW h m-3, indicating superior HA removal efficiency compared to other systems. Common anions (HCO3 -, Cl-, NO3 -) in water were found to inhibit the degradation of HA, and acidic conditions were more conducive to HA removal, with the optimal pH being 3. Free radical quenching experiments showed that both sulfate radical (SO4 -˙) and hydroxyl radical (˙OH) radicals were involved in HA degradation, with SO4 -˙ being the primary oxidant and ˙OH as the auxiliary species. Analyses using 3D-excitation-emission matrix (EEM), parallel factor analysis (PARAFAC), specific fluorescence index, and absorbance demonstrated that UV/PMS technology could effectively degrade HA in water. This study provides theoretical references for further research on the removal of HA and other organic substances using UV/PMS technology.

Enhancing biodegradation of aged hydrocarbon-contaminated soils through toluene addition: assessing effects on solid and slurry phase treatments

The main challenge in treating aged soils highly contaminated with total petroleum hydrocarbons (TPH) is to enhance their bioavailability for microbial degradation. Hydrocarbons in soils undergo chemical changes that make them more resistant to biodegradation. This study investigates toluene's efficacy in enhancing the biodegradation of aged hydrocarbon-contaminated soil containing 292,000 mg TPH kg-1 dry soil. Toluene's effect was compared between solid phase (SOP) and slurry phase (SLP) treatments using a microbial consortium isolated from Cyperus laxus rhizosphere. TPH biodegradation and microbial respiration were measured, the latter to estimate the respiratory quotient (RQ, the ratio between moles of carbon dioxide released and moles of oxygen absorbed during respiration). Toluene significantly accelerated TPH biodegradation in both treatments, achieving ~ 30% higher removal than in a non-solvent control, possibly through improved bioavailability of aromatic compounds and other low molecular weight compounds. According to the RQ analysis, toluene enhanced microbial respiratory processes and hydrocarbon catabolism with higher hydrocarbon mineralization (RQ =  ~ 0.5) in both SOP and SLP assays. Our results reveal toluene's potential to increase hydrocarbon availability and microbial degradation efficiency in aged contaminated soils; its use in various bioremediation techniques could be of broad applicability across diverse soil types and pollutants.

Assessment of nitrogen and phosphorus in the soil of longitudinal direction affected by in-situ oxidation remediation

The application of in-situ chemical oxidative remediation for contaminated soils has attracted extensive attention, but the effects of remediation processes on soil physical and chemical properties are rarely studied. Herein, a ferrous-activated persulphate oxidation system for remediating dibutyl phthalate (DBP)-polluted soil was simulated in the soil column to explore the effects of in-situ oxidative remediation on soil properties in the longitudinal direction. The DBP content in the soil column was used as an indicator of oxidation strength and the correlation between N, P, soil particle size and oxidation strength was analysed. The experiment results showed that the settling performance of polluted soil after remediation improved and the distribution of the soil particle size at 128 nm disappeared after oxidation, indicating that the suspended solids in the experimental soil were mainly fine clay particles. The oxidation system can promote the conversion of organic nitrogen to inorganic nitrogen and migration characteristics of nitrogen and phosphorus, to aggravate the loss of TN and TP in the soil. The average soil particle size (d50), TN, NH4-N, available phosphorus (Ava-P), exchangeable phosphorus (Ex-P) and organic phosphorus(Or-P) were significantly correlated with oxidation strength; and stable pH in the soil column (pH = 3), showing that the changes in the longitudinal direction of d50 (smaller), TN, NH4-N, Ava-P, Ex-P, and Or-P resulted from the weakening of the longitudinal oxidation strength in the direction of the soil column.

Sulfur-containing iron carbon nanocomposites activate persulfate for combined chemical oxidation and microbial remediation of petroleum-polluted soil

In this study, sulfur-containing iron carbon nanocomposites (S@Fe-CN) were synthesized by calcining iron-loaded biomass and utilized to activate persulfate (PS) for the combined chemical oxidation and microbial remediation of petroleum-polluted soil. The highest removal efficiency of total petroleum hydrocarbons (TPHs) was achieved at 0.2% of activator, 1% of PS and 1:1 soil-water ratio. The EPR and quenching experiments demonstrated that the degradation of TPHs was caused by the combination of 1O2,·OH, SO4·-, and O2·-. In the S@Fe-CN activated PS (S@Fe-CN/PS) system, the degradation of TPHs underwent two phases: chemical oxidation (days 0 to 3) and microbial degradation (days 3 to 28), with kinetic constants consistent with the pseudo-first-order kinetics of chemical and microbial remediation, respectively. In the S@Fe-CN/PS system, soil enzyme activities decreased and then increased, indicating that microbial activities were restored after chemical oxidation under the protection of the activators. The microbial community analysis showed that the S@Fe-CN/PS group affected the abundance and structure of microorganisms, with the relative abundance of TPH-degrading bacteria increased after 28 days. Moreover, S@Fe-CN/PS enhanced the microbial interactions and mitigated microbial competition, thereby improving the ability of indigenous microorganisms to degrade TPHs.

Persulfate activated with calcium peroxide to remediate RAFT soil contaminated with diesel in Arctic northern villages: on-site pilot scale study

A pilot field study was conducted in a Canadian northern village (NV) to assess the remediation efficiency of sodium persulphate (SPS) alkali activated with calcium peroxide (CP) to degrade diesel from Arctic raft soil. A minimum temperature increase in the subsurface due to overall process reactions was required. The projected context of application was imperative to preserve the integrity of the remaining permafrost. The test was performed with two soil columns of 370 L buried in the ground. The columns were contaminated with 7500 mg diesel/kg representative raft soil that was matured for a period of 11 months. The continuous delivery by gravity and the static presence of the oxidizing solution was made over 33 days. During that period, SPS concentration, pH and temperatures, were monitored. SPS was activated prior to its distribution and activation by-products were confined in a surficial tank and under a sludge form. The maturation period resulted in the important natural attenuation of diesel (47%) that occurred in the shallower horizons of the soil profile. About 35% of the diesel remaining after the maturation period was removed by chemical oxidation during the operation period on site. The temperature increase measured during the SPS activation process was not significant while the temperature increase due to diesel degradation by oxidation in the subsurface was evaluated to be below 3°C. The soil columns were not clogged by the by-products as indicated by hydraulic testing before and after oxidizing treatment.

Remediation of diesel contaminated soil by using activated persulfate with Fe3O4 magnetic nanoparticles: effect and mechanisms

In this study, Fe3O4 magnetic nanoparticles (Fe3O4 MNPs) were assessed for their ability to enhance the activity of persulfate (PS). Various controlling factors including PS dosages, initial pH, water-soil ratio, ratio of Fe2+, and Fe3O4 MNPs to PS were considered in both the Fe2+/PS system and the Fe3O4 MNPs/PS system. Results showed that the Fe3O4 MNP-activated PS system exhibited high processing efficiency owing to the gradual release of Fe2+. This process occurred in a wide pH range (5-11), attributed to the synergistic action of sulfate radicals (SO4-·) and hydroxyl radicals (OH·) under alkaline conditions, effectively mitigating soil acidification. The ratio of Fe3O4 MNPs to PS and water-soil ratio significantly influenced the degradation rate with the highest petroleum hydrocarbon degradation rate exceeding 80% (82.31%). This rate was 3.1% higher than that achieved by the Fe2+/PS system under specific conditions: PS dosage of 0.05 mol/L, Fe3O4 MNPs to PS ratio of 1:10, water-soil ratio of 2:1, and initial pH of 11. Meanwhile, oxidant consumption in the Fe3O4 MNPs/PS system was halved compared to the Fe2+/PS system due to the slow release of Fe2+ and less ineffective consumption of SO4-·. Mechanistically, the possible degradation process was divided into three parts: the initial chain reaction, the proliferating chain reaction, and the terminating chain reaction. The introduction of Fe3O4 MNPs accelerated the degradation rate of pentadecane, heneicosane, eicosane, tritetracontane, and 9-methylnonadecane.

Oxidation of chromium(Ⅲ): A potential risk of using chemical oxidation processes for the remediation of 2-chlorophenol contaminated soils

Chemical oxidation processes are widely used for the remediation of organically contaminated soils, but their potential impact on variable-valence and toxic metals such as chromium (Cr) is often overlooked. In this study, we investigated the risk of Cr(Ⅲ) oxidation in soils during the remediation of 2-chlorophenol (2-CP) contaminated soils using four different processes: Potassium permanganate (KMnO4), Modified Fenton (Fe2+/H2O2), Alkali-activated persulfate (S2O82-/OH-), and Fe2+-activated persulfate (S2O82-/Fe2+). Our results indicated that the KMnO4, Fe2+/H2O2, and S2O82-/Fe2+ processes progressively oxidized Cr(III) to Cr(Ⅵ) during the 2-CP degradation. The KMnO4 process likely involved direct electron transfer, while the Fe2+/H2O2 and S2O82-/Fe2+ processes primarily relied on HO• and/or SO4•- for the Cr(III) oxidation. Notably, after 4 h of 2-CP degradation, the Cr(VI) content in the KMnO4 process surpassed China's 3.0 mg kg-1 risk screening threshold for Class I construction sites, and further exceeded the 5.7 mg kg-1 limit for Class II construction sites after 8 h. Conversely, the S2O82-/OH- process exhibited negligible oxidation of Cr(III), maintaining a low oxidation ratio of 0.13%, as highly alkaline conditions induced Cr(III) precipitation, reducing its exposure to free radicals. Cr(III) oxidation ratio was directly proportional to oxidant dosage, whereas the Fe2+/H2O2 process showed a different trend, influenced by the concentration of reductants. This study provides insights into the selection and optimization of chemical oxidation processes for soil remediation, emphasizing the imperative for thorough risk evaluation of Cr(III) oxidation before their application.

From Theory to Practice: Leveraging Chemical Principles To Improve the Performance of Peroxydisulfate-Based In Situ Chemical Oxidation of Organic Contaminants

In situ chemical oxidation (ISCO) using peroxydisulfate has become more popular in the remediation of soils and shallow groundwater contaminated with organic chemicals. Researchers have studied the chemistry of peroxydisulfate and the oxidative species produced upon its decomposition (i.e., sulfate radical and hydroxyl radical) for over five decades, describing reaction kinetics, mechanisms, and product formation in great detail. However, if this information is to be useful to practitioners seeking to optimize the use of peroxydisulfate in the remediation of hazardous waste sites, the relevant conditions of high oxidant concentrations and the presence of minerals and solutes that affect radical chain reactions must be considered. The objectives of this Review are to provide insights into the chemistry of peroxydisulfate-based ISCO that can enable more efficient operation of these systems and to identify research needed to improve understanding of system performance. By gaining a deeper understanding of the underlying chemistry of these complex systems, it may be possible to improve the design and operation of peroxydisulfate-based ISCO remediation systems.

Ascorbic acid promoted sulfadimidine degradation in the magnetite-activated persulfate system by facilitating the Fe(III)/Fe(II) cycle

Persulfate (PS) activation technologies were of significant importance to the organic contaminant treatment. In this study, ascorbic acid (AA) was introduced to the traditional PS-activated process by using magnetite (Fe3O4) as the activator; herein, the degradation efficiency of sulfadimidine (SM2) was improved from 30 to 93% within 3 h, and the observed removal rate was about 8.0 times higher than that of the Fe3O4/PS system. These improvements were found to be induced by the added AA because it could reduce the surface Fe(III) to Fe(II) on Fe3O4 and thus facilitate the Fe(III)/Fe(II) cycle, which was conducive to producing reactive oxygen species (ROSs) in the oxidation process during PS activation. Meanwhile, AA could also promote the Fe(III)/Fe(II) cycle in the homogeneous solution, further advancing the PS decomposition for SM2 degradation. The ROS trapping experiments indicated that SM2 removal in the Fe3O4/PS/AA system was attributed to •OH and •SO4-, and •SO4- was the dominant ROS. Moreover, the reusability test experiment revealed that magnetite retained good activity after five cycles in the Fe3O4/AA/PS system. This study provides a promising PS activation technology for efficient organics contaminant treatment.

Persulfate-based remediation of organic-contaminated soil: Insight into the impacts of natural iron ions and humic acids with complexation/redox functionality

The use of persulfate (PDS) for in-situ chemical oxidation of organic contaminants in soils has garnered significant interest. However, the presence of naturally occurring iron-containing substances and humic acid (HA) in environmental compartments can potentially influence the effectiveness of soil remediation. Thus, this study aimed to investigate the role of key functional groups (adjacent phenolic hydroxyl (Ar-OH) and carboxyl groups (-COOH)) in HA that interact with iron. Modified HAs were used to confirm the significance of these moieties in iron interaction. Additionally, the mechanism by which specific functional groups affect Fe complexation and redox was explored through contaminant degradation experiments, pH-dependent investigations, HA by-products analysis, and theoretical calculations using six specific hydroxybenzoic acids as HA model compounds. The results showed a strong positive correlation between accessible Ar-OH and -COOH groups and Fe3+/Fe2+ redox. This was attributed to HA undergoing a conversion process to a semiquinone-containing radical form, followed by a quinone-containing intermediate, while Fe3+ acted as an electron shuttle between HA and PDS, with Fe3+ leaching facilitated by generated H+ ions. Although the stability of HA-Fe3+ complexes with -COOH as the primary binding sites was slightly higher at neutral/alkaline conditions compared to acidic conditions, the buffering properties of the soil and acidification of the PDS solution played a greater role in determining the Ar-OH groups as the primary binding site in most cases. Therefore, the availability of Ar-OH groups on HA created a trade-off between accelerated Fe3+/Fe2+ redox and quenching reactions. Appropriate HA and iron contents were found to favor PDS activation, while excessive HA could lead to intense competition for reactive oxygen species (ROS), inhibiting pollutant degradation in soil. The findings provide valuable insights into the interaction of HA and Fe-containing substances in persulfate oxidation, offering useful information for the development of in-situ remediation strategies for organic-contaminated soil.

Bioremediation of Diesel-Contaminated Soil by Fungal Solid-State Fermentation

To address the poor removal of diesel in soil by indigenous microorganisms, we proposed a fungal solid-state fermentation (SSF) method for bioremediation. We screened Pycnoporus sanguineus 5.815, Trametes versicolor 5.996, and Trametes gibbosa 5.952 for their diesel-degrading abilities, with Trametes versicolor 5.996 showing the most promise. The fungal inoculum was obtained through SSF using wood chips and bran. Trametes versicolor 5.996 was applied to two treatments: natural attenuation (NA, diesel-contaminated soil) and bioremediation (BR, 10% SSF added to diesel-contaminated soil). Over 20 days, NA removed 12.9% of the diesel, while BR achieved a significantly higher 38.3% degradation rate. BR also increased CO2 and CH4 emissions but reduced N2O emissions. High-throughput sequencing indicated SSF significantly enriched known diesel-degrading microorganisms like Ascomycota (83.82%), Proteobacteria (46.10%), Actinobacteria (27.88%), Firmicutes (10.35%), and Bacteroidota (4.66%). This study provides theoretical support for the application of fungal remediation technology for diesel and improves understanding of microbiologically mediated diesel degradation and soil greenhouse gas emissions.

Aniline degradation and As (III) oxidation and immobilization by thermally activated persulfate

In the Pearl River Delta of China, many sites are likely contaminated with aniline in the soil and arsenic (As) in the groundwater because of a high As background level and the prevailing printing and dyeing industry. This study is to explore the remediation performance of thermally activated persulfate oxidation for the sites with these two contaminants, aniline and As. The As influence on the aniline degradation and vice versa are also systematically investigated. When the molar ratio of aniline to persulfate is 1: 4.65, over 85% of aniline can be degraded at 40 °C in 24 h, and 100 μg L-1 As(III) in solution can be completely adsorbed by the soil. A higher pH favored the aniline degradation but disfavored the As(III) oxidation. Due to the strong buffer capacity of the soil, aniline in the soil could be more quickly degraded than those in the solution. The As(III), however, seem more easily oxidized in the absence of soil. The coexisting Fe2+ can substantially improve As(III) oxidation and immobilization, although the dilute Fe2+ solution may suppress the aniline degradation. The presence of aniline severely inhibited the As(III) oxidation and adsorption, likely due to the competition for the generated free radicals and the adsorption sites on the soils. In contrast, the existing As(III) has a slight effect on aniline degradation. These findings are believed to provide the theoretical basis for the remediation of aniline-arsenic contaminated sites.

Degradation of ciprofloxacin by persulfate activated by Fe(III)-doped BiOCl composite photocatalyst

Fe-BOC-X photocatalyst was successfully prepared by solvothermal method. The photocatalytic activity of Fe-BOC-X was determined by ciprofloxacin (CIP), a typical fluoroquinolone antibiotic. Under sunlight irradiation, all Fe-BOC-X showed better CIP removal performance than original BiOCl. In comparison, the photocatalyst with iron content of 50 wt% (Fe-BOC-3) has excellent structural stability and the best adsorption photodegradation efficiency. The removal rate of CIP (10 mg/L) by Fe-BOC-3 (0.6 g/L) reached 81.4% within 90 min. At the same time, the effects of photocatalyst dosage, pH, persulfate, persulfate concentration, and combinations of different systems (PS, Fe-BOC-3, Vis/PS, Vis/Fe-BOC-3, Fe-BOC-3/PS, and Vis/Fe-BOC-3/PS) on the reaction were systematically discussed. In reactive species trapping experiments, electron spin resonance (ESR) signals revealed that the photogenerated holes (h+), hydroxyl radical (•OH), sulfate radical (•SO4-), and superoxide radical (•O2-) played an important role in CIP degradation; hydroxyl radicals (•OH) and sulfate radicals (•SO4-) play a major role. Various characterization methods have demonstrated that Fe-BOC-X has larger specific surface area and pore volume than original BiOCl. UV-vis DRS indicate that Fe-BOC-X has wider visible light absorption and faster photocarrier transfer and provides abundant surface oxygen absorption sites for effective molecular oxygen activation. Accordingly, a large number of active species were produced and participated in the photocatalytic process, thus effectively promoting the degradation of ciprofloxacin. Based on HPLC-MS analysis, two possible decomposition pathways of CIP were finally proposed. The main degradation pathways of CIP are mainly due to the high electron density of piperazine ring in CIP molecule, which is mainly attacked by various free radicals. The main reactions include piperazine ring opening, decarbonylation, decarboxylation, and fluorine substitution. This study can better open up a new way for the design of visible light driven photocatalyst and provide more ideas for the removal of CIP in water environment.

Does Caulerpa prolifera with Its Bacterial Coating Represent a Promising Association for Seawater Phytoremediation of Diesel Hydrocarbons?

Anthropic diesel-derived contamination of Mediterranean coastal waters is of great concern. Nature-based solutions such as phytoremediation are considered promising technologies to remove contaminants from marine environments. The aim of this work was to investigate the tolerance of the Mediterranean autochthonous seaweed Caulerpa prolifera (Forsskal) Lamouroux to diesel fuel and its hydrocarbon degradation potential. Changes in C. prolifera traits, including its associated bacterial community abundance and structure, were determined by fluorescence microscopy and next-generation sequencing techniques. Thalli of C. prolifera artificially exposed to increasing concentration of diesel fuel for 30 days and thalli collected from three natural sites with different levels of seawater diesel-derived hydrocarbons were analysed. Gas chromatography was applied to determine the seaweed hydrocarbon degradation potential. Overall, in controlled conditions the lower concentration of diesel (0.01%) did not affect C. prolifera survival and growth, whereas the higher concentration (1%) resulted in high mortality and blade damages. Similarly, only natural thalli, collected at the most polluted marine site (750 mg L^-1), were damaged. A higher abundance of epiphytic bacteria, with a higher relative abundance of Vibrio bacteria, was positively correlated to the health status of the seaweed as well as to its diesel-degradation ability. In conclusion, C. prolifera tolerated and degraded moderate concentrations of seawater diesel-derived compounds, especially changing the abundance and community structure of its bacterial coating. The protection and exploitation of this autochthonous natural seaweed-bacteria symbiosis represents a useful strategy to mitigate the hydrocarbon contamination in moderate polluted Mediterranean costal environments.

Degradation of hexavalent chromium and naphthalene by electron beam irradiation: Degradation efficiency, mechanisms, and degradation pathway

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) in industrial wastewater have attracted much attention due to their damage to the environment and the human body. Studies have shown that there may be interactions between PAHs and HMs, leading to enhanced toxicity of both pollutants. It has been shown that traditional methods are difficult to treat a combination of PAHs and HMs simultaneously. This paper presented an innovative method for treating PAHs and HMs compound pollutants by electron beam irradiation and achieved the removal of the compound pollutants using a single means. Experiments showed that the absorbed dose at 15 kGy could achieve 100% degradation of NAP and 90% reduction of Cr (Ⅵ). This article investigated the effects of electron beam removal of PAHs and HMs complex contaminants in various water environmental matrices. The experimental results showed that the degradation of NAP followed the pseudo-first-order dynamics, and the degradation of NAP was more favorable under neutral conditions. Inorganic ions and water quality had little effect on NAP degradation. For electron beam reduction of Cr (Ⅵ), alkaline conditions were more conducive to reducing Cr (Ⅵ). Especially, adding K₂S₂O₈ or HCOOH achieved 99% reduction of Cr (Ⅵ). Experiments showed that •OH achieve the degradation of NAP, and e_aq^- achieve the reduction of Cr (Ⅵ). The results showed that the degradation of NAP was mainly achieved by benzene ring opening, carboxylation and aldehyde, which proved that the degradation of NAP was mainly caused by •OH attack. The toxicity analysis results showed that the electron beam could significantly reduce the toxicity of NAP, and the toxicity of the final product was much lower than NAP, realizing the harmless treatment of NAP. The experimental results showed that electron beam irradiation has faster degradation rates and higher degradation efficiency for NAP and Cr (Ⅵ) compared to other reported treatment methods.

Persulfate-based ISCO for field-scale remediation of NAPL-contaminated soil: Column experiments and modeling

An experimental and computational investigation of in situ chemical oxidation (ISCO) of weathered diesel fuel in soil columns was undertaken to validate a reactive-transport model capable of predicting contaminant mass reduction from a residual source zone. Reactivity tests with contaminated groundwater in batch reactors were used to estimate a priori the kinetic parameters of a phenomenological model of the oxidation of petroleum hydrocarbon (PHC) mixture fractions. The transport model, which incorporated groundwater flow, dissolution of main PHC fractions, and homogeneous reaction in the aqueous phase, was subsequently validated against experimental data of ISCO in soil columns using repetitive treatments with unactivated and alkaline-activated persulfate. No significant effect of the initial concentration of persulfate on the remediation performance was observed in the batch system, but alkaline activation significantly improved performance. The alkaline-activated persulfate treatment achieved ∼80% removal of the initial NAPL mass in soil columns. The combination of models and experiments described herein should enable the rational design of field-scale advanced oxidation strategies for the removal of weathered petroleum hydrocarbons. This expectation was supported by a comprehensive demonstration study at a historical site contaminated by weathered diesel fuel present as a residual source within the soil and dissolved within groundwater.

Quantitative study of in situ chemical oxidation remediation with coupled thermal desorption

In situ chemical oxidation (ISCO) is widely used as an efficient remediation technology for groundwater pollution. However, quantitative studies of its reactive remediation process under coupled thermal desorption technology are scarce. Based on laboratory experiments and site remediation, the chemical oxidation remediation reaction process was quantified, and the apparent reaction equation of the ISCO process was constructed. And then, a numerical model coupled with Hydraulic-Thermal-Chemical (HTC) fields was built to quantitatively describe the remediation process of an actual contaminated site. The simulation results fit well with the site monitoring data, and the results indicated that thermal desorption strengthens the ISCO remediation effect. In addition, the HTC model is expanded to build a conceptual and numerical model of a coupled remediation system, including heating and remediation wells. The results showed that high-temperature conditions enhance the activity of remediation chemicals and increase the rate of remediation reaction to obtain a better remediation effect. The heating wells increase the regional temperature, accelerating the diffusion of pollutants and remediation chemicals, and promoting adequate contact and reaction. Based on this crucial mechanism, thermal desorption coupled with ISCO technology can significantly improve remediation efficiency, shorten the remediation cycle, and precisely control agent delivery with the help of numerical simulation to avoid secondary contamination.

Remediation of benzo[a]pyrene contaminated soils by moderate chemical oxidation coupled with microbial degradation

Chemical oxidation is a promising technology for the remediation of organics-contaminated soils. However, residual oxidants and transformation products have adverse effects on microbial activities. This work aimed at moderate chemical oxidation coupled with microbial degradation (MOMD) for the removal of benzo[a]pyrene (BaP) by optimizing the type and dosage of oxidants. Potassium permanganate (KMnO₄), Fe²⁺ + sodium persulfate (Fe²⁺ + PS), Fenton's reagent (Fe²⁺ + H₂O₂), and hydrogen peroxide (H₂O₂) were compared for BaP removal from loam clay and sandy soils. Overall, the removal efficiency of BaP by a moderate dose of oxidant coupled indigenous microorganism was slightly lower than that by a high dose of relevant oxidant. The contributions of microbial degradation to the total removal of BaP varied for different oxidants and soils. The removal efficiency of BaP from loam clay sandy soil by a moderate dose of KMnO₄ (25 mmol/L) was 94.3 ± 1.1 % and 92.5 ± 1.8 %, respectively, which were both relatively higher than those under other conditions. The indirect carbon footprint yielded by the moderate dose of oxidants was 39.2-72.8 % less than that by the complete oxidation. A moderate dose of oxidants also reduced disturbances to soil pH and OC. The microbial communities after MOMD treatment were dominated by Burkholderiaceae, Enterobacteriaceae, Alicyclobacillaceae, and Oxalobacteraceae. These dominant microorganisms promoted the removal of BaP through the expression of polycyclic aromatic hydrocarbon-ring hydroxylated dioxygenase gene. Compared with complete chemical oxidation, MOMD is also a promising technique with the utilization of indigenous microorganism for remediating BaP-contaminated soils.

Monitoring of in-situ chemical oxidation for remediation of diesel-contaminated soil with electrical resistivity tomography

In-situ chemical oxidation (ISCO) with persulfate, an electrically conductive oxidant, provides a powerful signal for noninvasive geophysical techniques to characterize the remediation process of hydrocarbon contaminants. In this study, remediation with ISCO is conducted in laboratory sandboxes to evaluate the ability of electrical resistivity tomography (ERT) for monitoring the base-activated persulfate remediation process of diesel-contaminated soil. It was found that the resistivity of contaminated sand significantly decreased from 846 Ω·m to below 10 Ω·m after persulfate injection, and all measured chemical parameters showed a noticeable increase. Natural degradation and contamination plume migration were not evident in a reference sandbox without treatment. The area with a resistivity ratio < 0.95 based on imaging before and after injection indicated downward migration of the oxidation plume due to density-driven flow. A comparison between remediation and reference sandboxes showed that the observed resistivity decrease can be due to both contaminant degradation as well as the oxidation plume itself in the contaminated source zone. In contrast, the resistivity decrease in the area with low contamination concentration is attributed to the oxidation plume alone. The derived relationships between resistivity and contaminant indicators further emphasize that the contribution of contaminant consumption to resistivity change in the source area is 25.6%, while it is <16% in the low or non-contaminated area. Although this study showed that resistivity is not solely affected by the chemical transformation of diesel components, it can be combined with sampling data to allow an assessment of the effectiveness of ISCO treatment and to identify target areas for subsequent treatment.

Raman spectroscopic and microscopic monitoring of on-site and in-situ remediation dynamics in petroleum contaminated soil and groundwater

The mechanistic study of soil and groundwater remediation in petroleum contaminated lands significantly demands rapid qualitative and quantitative identification of petroleum substances. However, most traditional detection methods cannot provide the on-site or in-situ information of petroleum compositions and contents simultaneously even with multi-spot sampling and complex sample preparation. In this work, we developed a strategy for the on-site detection of petroleum compositions and in-situ monitoring of petroleum contents in soil and groundwater using dual-excitation Raman spectroscopy and microscopy. The detection time was 0.5 h for the Extraction-Raman spectroscopy method and one minute for the Fiber-Raman spectroscopy method. The limit of detection was 94 ppm for the soil samples and 0.46 ppm for the groundwater samples. Meanwhile, the petroleum changes at the soil-groundwater interface were successfully observed by Raman microscopy during the in-situ chemical oxidation remediation processes. The results revealed that hydrogen peroxide oxidation released petroleum from the interior to the surface of soil particles and then to groundwater during the remediation process, while persulfate oxidation only degraded petroleum on the soil surface and in groundwater. This Raman spectroscopic and microscopic method can shed light on the petroleum degradation mechanism in contaminated lands, and facilitate the selection of suitable soil and groundwater remediation plans.

Variability of Micro- and Macro-Elements in Anaerobic Co-Digestion of Municipal Sewage Sludge and Food Industrial By-Products

The main aim of this study was to evaluate the effect of the addition of selected industrial food wastes on the fate of micro- and macro-elements within an anaerobic digestion process (AD), as well as define the relationship between their content and AD efficiency. Orange peels, (OP), orange pulp (PL) and brewery spent grain (BSG) were used as co-substrates, while municipal sewage sludge (SS) was applied as the main component. The introduction of co-substrates resulted in improvements in feedstock composition in terms of macro-elements, with a simultaneous decrease in the content of HMs (heavy metals). Such beneficial effects led to enhanced methane production, and improved process performance at the highest doses of PL and BSG. In turn, reduced biogas and methane production was found in the three-component digestion mixtures in the presence of OP and BSG; therein, the highest accumulation of most HMs within the process was also revealed. Considering the agricultural application of all digestates, exceedances for Cu, Zn and Hg were recorded, thereby excluding their further use for that purpose.

Remediation of environmentally persistent organic pollutants (POPs) by persulfates oxidation system (PS): A review

Over the past few years, persistent organic pollutants (POPs) exhibiting high ecotoxicity have been widely detected in the environment. Persulfate-oxidation hybrid system is one of the most widely used novel advanced oxidation techniques and is based on the persulfate generation of SO₄^-∙ and ∙OH from persulfate to degrade POPs. The overarching aim of this work is to provide a critical review of the variety of methods of peroxide activation (e.g., light activated persulfate, heat-activated persulfate, ultrasound-activated persulfate, electrochemically-activated persulfate, base-activated persulfate, transition metal activated persulfate, as well as Carbon based material activated persulfate). Specifically, through this article we make an attempt to provide the important characteristics and uses of main activated PS methods, as well as the prevailing mechanisms of activated PS to degrade organic pollutants in water. Finally, the advantages and disadvantages of each activation method are analyzed. This work clearly illustrates the benefits of different persulfate activation technologies, and explores persulfate activation in terms of Sustainable Development Goals, technical feasibility, toxicity assessment, and economics to facilitate the large-scale application of persulfate technologies. It also discusses how to choose the most suitable activation method to degrade different types of POPs, filling the research gap in this area and providing better guidance for future research and engineering applications of persulfates.

Combination of zero-valent aluminum-acid system and electrochemically activated persulfate oxidation for biologically pre-treated leachate nanofiltration concentrate treatment

This study investigated the performance of combined zero-valent aluminum (ZVAl) and electrochemically activated persulfate (PS) oxidation for the leachate nanofiltration concentrate (NFC) treatment. Firstly, operating parameters in the ZVAl procedure were optimized and under the optimum conditions (ZVAl dose 1 g/L, initial pH 1.5) the removal efficiency of the chemical oxygen demand (COD), UV₂₅₄, and color were 22.39%, 29.03%, and 48.26%, respectively. Secondly, the effect of various anode types (Ti/RuO₂, Ti/IrO₂, and Ti/SnO₂) within the electrooxidation (EO) process was evaluated. The Ti/RuO₂ anode was found to be the most effective one in terms of pollutant removal efficiencies and operation cost. The efficiency of single, binary, and hybrid processes was evaluated by control experiments and the results were ranked as PS < ZVAl < ZVAl + PS < EO < EO + PS < EO + ZVAl < EO + ZVAl + PS. In the following part of the study, the Box-Behnken design was preferred to optimize the operating parameters of the hybrid EO + ZVAl + PS process. The COD, UV₂₅₄, and color removal efficiencies under optimum conditions (4.88 mM PS dose, 1.6 A current applied, and 120 min reaction time) were 62.1%, 75.2%, and 99.9%, respectively. The estimated and experimentally obtained data were close to each other. The pollutant removal efficiencies increased in parallel with the current density and reaction time; however, the effect of the PS dose remained at a negligible level. The obtained results indicate the effectiveness of the hybrid EO + ZVAl + PS process for the treatment of leachate nanofiltration concentrate under optimized conditions.

Review on the degradation of chlorinated hydrocarbons by persulfate activated with zero-valent iron-based materials

Chlorinated hydrocarbons (CHCs) are often used in industrial processes, and they have been found in groundwater with increasing frequency in recent years. Several typical CHCs, including trichloroethylene (TCE), 1,1,1-trichloroethane (TCA), carbon tetrachloride (CT), etc., have strong cytotoxicity and carcinogenicity, posing a serious threat to human health and ecological environment. Advanced persulfate (PS) oxidation technology based on nano zero-valent iron (nZVI) has become a research hotspot for CHCs degradation in recent years. However, nZVI is easily oxidized to form the surface passivation layer and prone to aggregation in practical application, which significantly reduces the activation efficiency of PS. In order to solve this problem, various nZVI modification solutions have been proposed. This review systematically summarizes four commonly used modification methods of nZVI, and the theoretical mechanisms of PS activated by primitive and modified nZVI. Besides, the influencing factors in the engineering application process are discussed. In addition, the controversial views on which of the two (SO₄·^- and ·OH) is dominant in the nZVI/PS system are summarized. Generally, SO₄·^- predominates in acidic conditions while ·OH prefers neutral and alkaline environments. Finally, challenges and prospects for practical application of CHCs removal by nZVI-based materials activating PS are also analyzed.

Diesel removal and recovery from heavily diesel-contaminated soil based on three-liquid-phase equilibria of diesel + 2-butyloxyethanol + water

Diesel contamination poses a serious threat to ecosystem and human health. This study proposes a novel method for simultaneous diesel removal and recovery from heavily diesel-contaminated soil by washing based on three-liquid-phase equilibria of diesel+2-butoxyethanol+water. This work covers both theoretical-cum-experimental explorations. For this brand-new ternary three-liquid-phase system (TPS), Ternary-Gibbs and Fish-Shaped phase diagrams were constructed through the phase behavior investigation to provide theoretical support for diesel removal/recovery. As the experiment demonstrated, the removal efficiency was up to 87.5 % for the contaminated soil with diesel content of 226,723 mg/kg, and the recovery rate reached 73.8 %. In addition, the TPS could also be used continuously during the washing process while avoiding solution purification, and the detached diesel would automatically float into the top phase without complicated separation. The mechanism of diesel removal was determined as the surface "stripping" effect based on ultralow interfacial tension, and the enhanced process involved "stripping+dissolution". The treated soil contained almost negligible organic solvent residue and was therefore appropriate for plant cultivation. The recovered diesel exhibited less variation from commercial diesel in composition and properties, possessing a higher potential for reuse. Moreover, this study also provided key insights into the residual mechanisms of recalcitrant hydrocarbons in the soil.

Efficient chlorinated alkanes degradation in soil by combining alkali hydrolysis with thermally activated persulfate

Alkali activation is the most commonly used activation method for persulfate (PS) in in-situ remediation. However, the role of alkali in pollutant degradation is still elusive, limiting the optimization of relevant remediation strategies. In this study, we found that chlorinated alkanes (e.g., tetrachloroethane (TeCA)) could be efficiently degraded by thermal-alkali activation of PS. The main role of alkali was not activating PS but hydrolyzing the chlorinated alkanes, which was evidenced by the immediate conversion of TeCA into trichloroethylene (TCE) with NaOH and PS or with sole NaOH solution. Electron paramagnetic resonance analysis also showed that with a high NaOH/PS molar ratio (4:1) the intensity of oxidative radicals decreased, implying that high levels of alkali did not favor the formation of free radicals. Interestingly, better degradation of TeCA and its product TCE was observed by the combination of alkaline hydrolysis and thermal activation of PS (where alkali was added 6 h before PS rather than simultaneously) in comparison to thermal-alkali activation of PS. This study provides new insights into the remediation of chlorinated alkane-contaminated soils by in-situ chemical oxidation.

Coupling surfactants with ISCO for remediating of NAPLs: Recent progress and application challenges

Non-aqueous phase liquids (NAPLs) pose a serious risk to the soil-groundwater environment. Coupling surfactants with in situ chemical oxidation (ISCO) technology is a promising strategy, which is attributed to the enhanced desorption and solubilization efficiency of NAPL contaminants. However, the complex interactions among surfactants, oxidation systems, and NAPL contaminants have not been fully revealed. This review provides a comprehensive overview on the development of surfactant-coupled ISCO technology focusing on the effects of surfactants on oxidation systems and NAPLs degradation behavior. Specifically, we discussed the compatibility between surfactants and oxidation systems, including the non-productive consumption of oxidants by surfactants, the role of surfactants in catalytic oxidation systems, and the loss of surfactants solubilization capacity during oxidation process. The effect of surfactants on the degradation behavior of NAPL contaminants is then thoroughly summarized in terms of degradation kinetics, byproducts and degradation mechanisms. This review demonstrates that it is crucial to minimize the negative effects of surfactants on NAPL contaminants oxidation process by fully understanding the interaction between surfactants and oxidation systems, which would promote the successful implementation of surfactant-coupled ISCO technology in remediation of NAPLs-contaminated sites.

Coupled effect of porous network and water content on the natural attenuation of diesel in unsaturated soils

The natural attenuation potential of a vadose zone against diesel is critical for optimizing remedial actions and determining groundwater vulnerability to contamination. Here, diesel attenuation in unsaturated soils was systematically examined to develop a qualitative relationship between physical soil properties and the natural attenuation capacity of a vadose zone against diesel. The uniformity coefficient (C_u) and water saturation (S_w, %) were considered as the proxies reflecting the degree of effects by porous network and water content in different soils, respectively. These, in turn, are related to the primary diesel attenuation mechanisms of volatilization and biodegradation. The volatilization of diesel was inversely proportional to C_u and S_w, which could be attributed to effective pore channels facilitating gas transport. Conversely, biodegradation was highly proportional to C_u under unsaturated conditions (S_w = 35-71%), owing to nutrients typically associated with fine soil particles. The microbial community in unsaturated soils was affected by S_w rather than C_u. The overall diesel attenuation including volatilization and biodegradation was optimized at S_w = 35% for all tested soils.

In situ synthesis of Fe-N co-doped carbonaceous nanocomposites using biogas residue as an effective persulfate activator for remediation of aged petroleum contaminated soils

Persulfate (PS)-based chemical oxidation is an effective method for the remediation of petroleum-contaminated soils, but higher concentrations of PS (3-40%) may lead to soil acidification (pH decreased by 1.8-6.2 units) and affect the microbial communities. In this study, Fe/N co-doped carbonaceous nanocomposites (Fe-N @ CN) that can efficiently activate PS were developed from biogas residue for the remediation of petroleum-contaminated soil. The as-obtained Fe-N@CN displayed that the Fe-based nanoparticles were encapsulated in graphitic nanosheets, with Fe₃C and FeN_0.0760 as the main bonding modes. The removal efficiency of total petroleum hydrocarbons (TPHs) reached 73.14% in 3 days with a PS dose of 2% and catalyst dose of 0.4%, and increased by 15.8% on adding 30 mmol/kg of β-cyclodextrin. The free-radical quenching experiment and electron paramagnetic resonance revealed that SO₄·^-,·OH, O₂·^-, and ¹O₂ were involved in the removal of TPHs. Because of the low PS dosage, the remediation process had no significant effect on the soil pH. During the remediation process, soil catalase activity was enhanced and then recovered, whereas the soil bacterial community, reflected by the operational taxonomic unit values, decreased and then recovered. TPH-degrading bacteria were produced in the Fe-N@CN/PS/soil system after chemical oxidation, further contributing to soil remediation.

Efficient degradation of imidacloprid in soil by thermally activated persulfate process: Performance, kinetics, and mechanisms

Imidacloprid (IMI) as a first-generation commercial neonicotinoid has been frequently detected in the environment in recent years. In this study, the efficient degradation of IMI in soil by a thermally activated persulfate (PS) process was investigated. The degradation efficiencies of IMI were in the range of 82-97% with the PS dosage of 10 mM, when the initial concentrations of IMI were 5-50 mg/kg in the soil. Degradation of the IMI was fitted with a pseudo-first-order kinetic model under different reaction temperatures. Inhibition effects of the common inorganic anions on the IMI degradation in the system followed the order Cl^- > HCO₃^- > H₂PO₄^- > NO₃^-. Soil pH and soil organic matter were also main factors affecting the degradation of IMI. The degradation efficiencies (64-97%) of three other typical neonicotinoids (acetamiprid, clothianidin, and dinotefuran) indicated that the thermally activated persulfate process could be used for remediation of neonicotinoid-contaminated soil. Quenching experiments indicated that the major reactive species in IMI degradation were SO₄^•-, O₂^•-, and •OH. Six degradation intermediates of IMI were inferred in the soil, and degradation pathways of IMI included hydroxylation, denitrification, C-N bond break and further oxidation.

Efficient Separation and Recovery of Petroleum Hydrocarbon from Oily Sludge by a Combination of Adsorption and Demulsification

The treatment of oily sludge (OS) can not only effectively solve environmental pollution but also contribute to the efficient use of energy. In this study, the separation effect of OS was analyzed through sodium lignosulfonate (SL)-assisted sodium persulfate (S/D) treatment. The effects of SL concentration, pH, temperature, solid-liquid ratio, revolving speed, and time on SL adsorption solubilization were analyzed. The effects of sodium persulfate dosage, demulsification temperature, and demulsification time on sodium persulfate oxidative demulsification were analyzed. The oil removal efficiency was as high as 91.28%. The results showed that the sediment was uniformly and finely distributed in the S/D-treated OS. The contact angle of the sediment surface was 40°, and the initial apparent viscosity of the OS was 56 Pa·s. First, the saturated hydrocarbons and aromatic hydrocarbons on the sediment surface were adsorbed by the monolayer adsorption on SL. Stubborn, cohesive oil agglomerates were dissociated. Sulfate radical anion (SO4-·) with a high oxidation potential, was formed from sodium persulfate. The oxidation reaction occurred between SO4-· and polycyclic aromatic hydrocarbons. A good three-phase separation effect was attained. The oil recovery reached 89.65%. This provides theoretical support for the efficient clean separation of oily sludge.

Abatement of Naphthalene by Persulfate Activated by Goethite and Visible LED Light at Neutral pH: Effect of Common Ions and Organic Matter

Naphthalene (NAP) has received particular attention due to its impact on the environment and human health, mandating its removal from water systems. In this work, the abatement of NAP in the aqueous phase was achieved using persulfate (PS) activated by Fe (III) and monochromatic LED light at a natural pH. The reaction was carried out in a slurry batch reactor using goethite as the Fe (III) source. The influence of the PS concentration, goethite concentration, irradiance, temperature and presence of organic matter, chloride, and bicarbonate on the abatement of NAP was studied. These variables were shown to have a different effect on NAP removal. The irradiance showed a maximum at 0.18 W·cm−2 where the photonic efficiency was the highest. As for the concentration of goethite and PS, the influence of the first one was negligible, whereas for PS, the best results were reached at 1.2 mM due to a self-inhibitory effect at higher concentrations. The temperature effect was also negative in the PS consumption. Regarding the effect of ions, chloride had no influence on NAP conversion but carbonates and humic acids were affected. Lastly, this treatment to remove NAP has proved to be an effective technique since minimum conversions of 0.92 at 180 min of reaction time were reached. Additionally, the toxicity of the final samples was decreased.

Activation of peroxymonosulfate by pyrophosphate for the degradation of AO7 at neutral pH

In the present study, pyrophosphate (PP) was used to activate peroxymonosulfate (PMS) for acid orange 7 (AO7) removal under neutral pH conditions. The removal rate of AO7 (20 mg/L) was 84% within the reaction time with a rate constant value of 0.0165 min^-1 under optimum conditions. Additionally, the effects of the concentrations of PMS and PP in solutions with various pH values and the coexisting inorganic anions on AO7 removal were measured. In addition, the performance of phosphate (P(V)) on PMS activation was compared with that of phosphite (P(III)) species. In contrast to P(III), the concentration of P(V) showed a positive correlation with the efficiency of AO7 decolorization. PMS activation in different types of buffer solutions was also examined, and the results indicated that the decolorization efficiency of AO7 induced by PP addition, and the buffer solution also contributed to PMS self-decomposition. Singlet oxygen (¹O₂) might be the primary reactive oxygen species (ROS) in the PP/PMS system in which AO7 is decolorized at an initial pH of 7.06, as indicated by quenching experiments and electron spin resonance (ESR) tests. Therefore, PP/PMS systems may be promising technologies for removing organic contaminants, particularly for PP-rich electroplating wastewater.

Recent progress on in-situ chemical oxidation for the remediation of petroleum contaminated soil and groundwater

Accidental oil leaks and spills can often result in severe soil and groundwater pollution. In situ chemical oxidation (ISCO) is a powerful and efficient remediation technology. In this review, the applications and recent advances of three commonly applied in-situ oxidants (hydrogen peroxide, persulfate, and permanganate), and the gap in remediation efficiency between lab-scale and field-scale applications is critically assessed. Feasible improvements for these measures, especially solutions for the 'rebound effect', are discussed. The removal efficiencies reported in 108 research articles related to petroleum-contaminated soil and groundwater were analyzed. The average remediation efficiency of groundwater (82.7%) by the three oxidants was higher than that of soil (65.8%). A number of factors, including non-aqueous phase liquids, adsorption effect, the aging process of contaminants, low-permeability zones, and vapor migration resulted in a decrease in the remediation efficiency and caused the residual contaminants to rebound from 19.1% of the original content to 57.7%. However, the average remediation efficiency of ISCO can be increased from 40.9% to 75.5% when combined with other techniques. In the future, improving the utilization efficiency of reactive species and enhancing the contact efficiency between oxidants and petroleum contaminants will be worthy of attention. Multi-technical combinations, such as the ISCO coupled with phase-transfer, viscosity control, controlled release or natural attenuation, can be effective methods to solve the rebound problem.

Decomplexation of Cu(II)-EDTA by synergistic activation of persulfate with alkali and CuO: Kinetics and activation mechanism

Heavy metals usually coexist with a variety of chelating agents to form heavy metal complexes in industrial wastewater. The decomplexation of heavy metal complexes is the crucial step before the removal of heavy metals via alkaline precipitation process. An efficient synergistic activation of persulfate (PS) with alkali and CuO was used for the simultaneous decomplexation of Cu-ethylenediamine tetraacetic acid (Cu(II)-EDTA) (3.14 mM) and the Cu(II) precipitation. The experimental results demonstrated that nearly complete removal of Cu(II) could be achieved by synergistic activation of PS with alkali and CuO at pH 11 after 2 h of decomplexation reaction. However, sole PS could not effectively decomplex Cu(II)-EDTA (13.5%), while the alkaline activation of PS could accomplish 57.0% removal of Cu(II). Radical scavenger tests indicated that reactive oxygen species (ROS) including SO₄^•-, •OH and O₂^•- were responsible for the decomplexation of Cu(II)-EDTA in the synergistic activation of PS with alkali and CuO. As a heterogeneous activator, CuO possessed excellent reusability and long-lasting catalytic activity and the rate constant value (k) of Cu(II) removal showed an increase (from 0.0326 min^-1 in the first cycle to 0.0491 min^-1 in the 24^th cycle) with 24 cycles experiments. Furthermore, the biotoxicity evaluation of treated solution revealed that the biotoxicity of Cu(II)-EDTA contaminated wastewater could be effectively mitigated by the synergistic activation of PS with alkali and CuO because of the efficient precipitation of Cu(II) and oxidative degradation of EDTA organic ligands, which was favorable for the subsequent biochemical treatment.

gCN-P: a coupled g-C3N4/persulfate system for photocatalytic degradation of organic pollutants under simulated sunlight

A coupled g-C3N4/PDS system, named gCN-P, has been put forward to degrade refractory organic pollutants under simulated sunlight which integrates photocatalysis and PS-AOPs (advanced oxidation of persulfate based on sulfate radicals). The coupled g-C3N4 and PDS showed superior synergistic effect for MO degradation under simulated sunlight. Results showed that almost all MO was removed in the gCN-P system after irradiation for 80 min under simulated sunlight. The degradation rate of gCN-P system was improved by 12.6 and 4.9 times compared to single PDS and g-C3N4 systems, respectively. And only by adding 0.01 g of persulfate into the gCN-P system. The results of quenching experiments and EPR showed that O2-, 1O2 and h+ were main active species for the degradation of MO in the gCN-P system under simulated sunlight. Application of the gCN-P system in tap water samples demonstrated its excellent performance in real-world water environment, and the gCN-P system was employed for removing other new contaminants such as bisphenol A, ciprofloxacin, and paracetamol. The results demonstrated the gCN-P system can effectively remove organic pollutants under sunlight in practices.

Mangrove's rhizospheric engineering with bacterial inoculation improve degradation of diesel contamination

Mangroves (Avicennia marina) growing in intertidal areas are often exposed to diesel spills, adversely damaging the ecosystem. Herein, we showed for the first time that mangrove seedlings' associations with bacteria could reprogram host-growth, physiology, and ability to degrade diesel. We found four bacterial strains [Sphingomonas sp.-LK11, Rhodococcus corynebacterioides-NZ1, Bacillus subtilis-EP1 Bacillus safensis-SH10] exhibiting significant growth during diesel degradation (2% and 5%, v/v) and higher expression of alkane monooxygenase compared to control. This is in synergy with reduced long-chain n-alkanes (C24-C30) during microbe-diesel interactions in the bioreactor. Among individual strains, SH10 exhibited significantly higher potential to improve mangrove seedling's morphology, anatomy and growth during diesel treatment in rhizosphere compared to control. This was also evidenced by reduced activities and gene expression of antioxidant enzymes (catalases, peroxidases, ascorbic peroxidases, superoxide dismutases and polyphenol peroxidases) and lipid peroxidation during microbe-diesel interactions. Interestingly, we noticed significantly higher soil-enzyme activities (phosphatases and glucosidases) and essential metabolites in seedling's rhizosphere after bacteria and diesel treatments. Degradation of longer n-alkane chains in the rhizosphere also revealed a potential pathway that benefits mangroves by bacterial strains during diesel contaminations. Current results support microbes' application to rhizoengineer plant growth, responses, and phytoextraction abilities in environments contaminated with diesel spills. AVAILABILITY OF DATA AND MATERIALS: The datasets generated during the current study are available in the NCBI GenBank ((https://www.ncbi.nlm.nih.gov).

Recent Developments in Advanced Oxidation Processes for Organics-Polluted Soil Reclamation

Soil pollution has become a substantial environmental problem which is amplified by overpopulation in different regions. In this review, the state of the art regarding the use of Advanced Oxidation Processes (AOPs) for soil remediation is presented. This review aims to provide an outline of recent technologies developed for the decontamination of polluted soils by using AOPs. Depending on the decontamination process, these techniques have been presented in three categories: the Fenton process, sulfate radicals process, and coupled processes. The review presents the achievements of, and includes some reflections on, the status of these emerging technologies, the mechanisms, and influential factors. At the present, more investigation and development actions are still desirable to bring them to real full-scale implementation.

Use of an automated respirometer for in situ chemical oxidation (ISCO) activator type and concentration selection

In situ chemical oxidation (ISCO) is a popular remediation technique for hydrocarbon-contaminated soil and groundwater. A range of oxidising agents and activators are available for ISCO; however, selection is usually based on contaminant destruction which is time-consuming and impacted by sample heterogeneity based on 1-10 g sample contaminant analysis. In this paper, we demonstrate the use of an automated respirometer, measuring CO₂ production, as a rapid and reliable approach for activator type and concentration selection. The approach is demonstrated based on tests in matrices of different types (loam soil and sand). In both matrices, CO₂ production was significantly increased following sodium persulphate (SPS) oxidation with iron activation in a concentration-dependant manner. Alkaline activation led to no increased CO₂ production compared to SPS addition without activation. The approach will provide greater confidence in treatability testing and reagent efficiency in ISCO projects.

Foam flushing with soil vapor extraction for enhanced treatment of diesel contaminated soils in a one-dimensional column

A limitation of soil vapor extraction (SVE) remediation for total petroleum hydrocarbons (TPHs) in the unsaturated zone is the inability to remove the less volatile petroleum mixture compounds in diesel fuel. SVE combined with foam flushing may have the potential to enhance dissolution or mobilization of soil sorbed diesel and allow mobilized diesel to move to the SVE extraction well. A nonionic surfactant polyoxyethylene (20) sorbitan monooleate (TW80) was selected for generating foam, and a procedure to incorporate the oxidant sodium persulfate (SPS) in generating TW80/SPS foam to deliver chemical oxidation, was also studied. Both TW80 and TW80/SPS foams exhibited 96-98% quality under 8-32 mM of TW80 and 10-50 mM of SPS. The addition of SPS in TW80 solution resulted in elevated ionic content and degradation of TW80, which may reduce the foam stability and have minor effects on foam quality. Through analysis of interrelationships among column flushing experimental parameters, it was shown that the foam quality was reduced to 42-47% when foam flushed through a diesel contaminated soil column. Moreover, the results of column flushing tests operated for 12 h indicated that the effectiveness of removal of diesel by different foams followed the order of TW80 foam (53%) > TW80/SPS foam (37%) >N₂ gas flow alone (3%). It was shown that foam flushing could be an alternative approach, rather than using N₂ gas flow alone (SVE), in enhancing SVE for reducing diesel contamination in the unsaturated zone.

Degradation of norfloxacin by calcite activating peroxymonosulfate: Performance and mechanism

In this study, calcite was investigated as an activator for the norfloxacin (NOR) degradation by peroxymonosulfate (PMS). Under optimum conditions, the NOR removal percentage was 99.7% within 60 min, and the pseudo-first-order kinetics effectively described the two-stage oxidation process. The NOR removal percentage improved from 10.4% to 91.5% and the reaction rate constant elevated from 0.0010 to 0.1217 min^-1 when 0.5 g/L calcite was added compared to that without calcite addition. Furthermore, the results of radical scavenger and electron spin resonance trapping indicated that the favorable alkaline environment and a proper level of carbonate in the Calcite/PMS system facilitated the activation of PMS to generate ¹O₂ for rapid NOR degradation. Compared with NaOH, calcite was able to maintain the pH (8-9) of the reaction system stable. Besides, the content of anions with buffering capacity and organic matter in the water matrix influenced the removal percentage of NOR. Seven intermediates were identified and the NOR degradation pathways were suggested. The findings of this research provided an environmentally friendly activator for remediation of organic wastewater and deepened the understanding of the interaction between calcium carbonate and PMS.

Aged diesel and heavy metal pollution in the Arctic tundra (Yamal Peninsula, Russia)

Monitoring pollution in Arctic regions is a challenging and important task, regardless of the way these lands are used. The summer 2019 expedition to the Yamal Peninsula revealed historic petroleum pollution of the tundra area adjacent to "Yamalsky" natural reserve. Soil, surface water and bottom sediments from a downhill lake, and herbaceous plant Eriophorum scheuchzeri samples were collected to address the origin and the level of the aged pollution, and to investigate, if E. scheuchzeri species could be a potential phytoremediation agent. Compositional GC-MS analysis of the soil organic matter showed that diesel fuel spillage affected the study area and the territories nearby. Weathered diesel compounds penetrated the soil and reached the permafrost layer at 85 cm depth. Petroleum hydrocarbon level peaked at 11% (wt) in the topsoil at the polluted site and 3% (wt) in the bottom sediments of the downhill lake, demonstrating chronic ecosystem exposure. The following ICP-MS analysis showed presence of trace elements (V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Mo, Ag, Cd, Ba, Pb, Bi, U) in the soil, water, and E. scheuchzeri samples. Observed concentrations of V, Cr, Cd, Pb, Ni, and Zn in the soil samples exceeded the background values by 3.6, 2.3, 9.7, 2.9, and 3.0 times, respectively. V (0.4 mg/L) and Cr (0.12 mg/L) levels in the lake water exceeded the established national limits by 40 and 2.4 times, respectively, which demonstrated the possibility of pollution migration with groundwater or surface water. The plant E. scheuchzeri tolerated diesel pollution and stimulated natural attenuation, bioaccumulating Mo, Cd, Ba, and Bi in its tissue from the soil. E. scheuchzeri is proposed for phytoremediation of Arctic soils polluted with petroleum and metals.

Highly effective removal of bisphenol A by greigite/persulfate in spiked soil: Heterogeneous soil/water system balance and degradation

The degradation of bisphenol A (BPA) in spiked soil was studied to investigate persulfate (PS) activation by the environment-friendly heterogeneous material greigite for removing organic pollutants from soil. The effects of the PS and greigite doses were investigated, and the BPA degradation rate in the lateritic red soil was lower than that in kaolin. Notably, 500 mg/kg of BPA could be effectively removed by the flower-like greigite (FLG)/PS system in 30 min. The difference in BPA degradation in kaolin and the lateritic red soil was negligible, thus indicating that the contents of components such as total organic matters in the lateritic red soil did not affect the BPA degradation rate of the FLG/PS system considerably. Furthermore, the distribution processes of BPA in the soil and liquid phase were also investigated in detail. The results showed that the water contents were a key factor in the distribution and degradation of BPA. The transfer of BPA from kaolin to the liquid phase was simpler than that from the lateritic red soil to the liquid phase. BPA might be transferred to the liquid phase first and then degraded by the FLG/PS system in that phase. Regarding BPA degradation in the lateritic red soil, BPA was degraded in the soil and liquid phases at the same time. This study proposed a pathway for BPA degradation in soil slurries by heterogeneous material/PS systems for first time, providing a deeper understanding of the degradation mechanism of organic pollutants in soil and new methods for soil remediation.

Different activation methods in sulfate radical-based oxidation for organic pollutants degradation: Catalytic mechanism and toxicity assessment of degradation intermediates

With the continuous development of industrialization, a growing number of refractory organic pollutants are released into the environment. These contaminants could cause serious risks to the human health and wildlife, therefore their degradation and mineralization is very critical and urgent. Recently sulfate radical-based advanced oxidation technology has been widely applied to organic pollutants treatment due to its high efficiency and eco-friendly nature. This review comprehensively summarizes different methods for persulfate (PS) and peroxymonosulfate (PMS) activation including ultraviolet light, ultrasonic, electrochemical, heat, radiation and alkali. The reactive oxygen species identification and mechanisms of PS/PMS activation by different approaches are discussed. In addition, this paper summarized the toxicity of degradation intermediates through bioassays and Ecological Structure Activity Relationships (ECOSAR) program prediction and the formation of toxic bromated disinfection byproducts (Br-DBPs) and carcinogenic bromate (BrO₃^-) in the presence of Br^-. The detoxification and mineralization of target pollutants induced by different reactive oxygen species are also analyzed. Finally, perspectives of potential future research and applications on sulfate radical-based advanced oxidation technology in the treatment of organic pollutants are proposed.

UV Stimulated Manganese Dioxide for the Persulfate Catalytic Degradation of Bisphenol A

One of the most commonly produced industrial chemicals worldwide, bisphenol A (BPA), is used as a precursor in plastics, resins, paints, and many other materials. It has been proved that BPA can cause long-term adverse effects on ecosystems and human health due to its toxicity as an endocrine disruptor. In this study, we developed an integrated MnO2/UV/persulfate (PS) process for use in BPA photocatalytic degradation from water and examined the reaction mechanisms, degradation pathways, and toxicity reduction. Comparative tests using MnO2, PS, UV, UV/MnO2, MnO2/PS, and UV/PS processes were conducted under the same conditions to investigate the mechanism of BPA catalytic degradation by the proposed MnO2/UV/PS process. The best performance was observed in the MnO2/UV/PS process in which BPA was completely removed in 30 min with a reduction rate of over 90% for total organic carbon after 2 h. This process also showed a stable removal efficiency with a large variation of pH levels (3.6 to 10.0). Kinetic analysis suggested that 1O2 and SO4•− played more critical roles than •OH for BPA degradation. Infrared spectra showed that UV irradiation could stimulate the generation of –OH groups on the MnO2 photocatalyst surface, facilitating the PS catalytic degradation of BPA in this process. The degradation pathways were further proposed in five steps, and thirteen intermediates were identified by gas chromatography-mass spectrometry. The acute toxicity was analyzed during the treatment, showing a slight increase (by 3.3%) in the first 30 min and then a decrease by four-fold over 2 h. These findings help elucidate the mechanism and pathways of BPA degradation and provide an effective PS catalytic strategy.