Research on the sustainable efficacy of g-MoS2 decorated biochar nanocomposites for removing tetracycline hydrochloride from antibiotic-polluted aqueous solution

Recyclable Au@R-Fe3O4/g-C3N4 substrates for rapid SERS detection and degradation of multiple pollutants

Developing a Surface-enhanced Raman spectroscopy (SERS) method with excellent detecting ability, good recyclability and analyzing multiple pollutants rapidly are critical for evaluation of water quality in emergency pollution affairs. While constructing a multifunctional substrate with these characteristics to realize the application of SERS in water quality monitoring remains a challenge. In this work, a reusable Au@R-Fe3O4/g-C3N4 SERS substrate is prepared by loading Au nanoparticles (Au NPs) on Fe3O4 nanorings (R-Fe3O4) and the formed Au@R-Fe3O4 is further combined with g-C3N4 nanosheets through a simple electrostatic assembly method. The Au@R-Fe3O4/g-C3N4 nanocomposite presents multifunction of magnetic enrichment, SERS signal enhancement, multiple pollutants analyzing, and photocatalytic activity, which achieves quantitative detection of rhodamine B (RhB), tetracycline hydrochloride (TC), and 4-chlorophenol (4-CP), with detection limits of 5.30 × 10-9, 7.50 × 10-8, 7.69 × 10-8 mol/L, respectively. Furthermore, the recyclable detection capability of Au@R-Fe3O4/g-C3N4 for multi components is demonstrated by the strong SERS signal after 9 cycles of "detection-degradation" processes. Combined with good uniformity and stability, this SERS method based on Au@R-Fe3O4/g-C3N4 substrate provides a new strategy for the multi-pollutants detection and degradation in water environment.

Hydrothermal N-doping, magnetization and ball milling co-functionalized sludge biochar design and its selective adsorption of trace concentration sulfamethoxazole from waters

This study aimed to design an efficient and easily collected/regenerated adsorbent for trace concentration sulfamethoxazole (SMX) removal to eliminate its negative impacts on human health, reduce the risk of adsorbed SMX release and boost the reusability of adsorbent. Various multiple modified sludge-derived biochars (SBC) were synthesized in this work and applied to adsorb trace level SMX. The results demonstrated that hydrothermal N-doping, magnetization coupled with ball milling co-functionalized SBC (BMNSBC) displayed the greater adsorption ability for SMX. The maximum adsorption capacity of BMNSBC for SMX calculated by Langmuir model was 1.02×105 μg/g, which was 12.9 times of SBC. Characterization combined with adsorption experiments (e.g., models fitting) and DFT calculation confirmed that π-π conjugation, Lewis acid-base, pore filling and Fe3O4 complexation were the primary forces driving SMX binding to BMNSBC. These diversified physicochemical forces contributed to the fine anti-interference of BMNSBC to background substances (e.g., inorganic compounds and organic matter) and its remarkable adsorption ability for SMX in diverse real waters. The great magnetization strength of BMNSBC was advantage for its collection and efficient regeneration by NaOH desorption. Additionally, BMNSBC exhibited a outstanding security in view of its low leaching levels of iron (Fe) and total nitrogen (TN). The multiple superiority of BMNSBC enable it to be a prospective material for emerging contaminants (e.g., SMX) purification, also offering a feasible disposal approach for municipal waste (e.g., sludge).

A thorough investigation into the adsorption behavior of sophorolipid-modified fly ash towards compound pollution of lead and tetracycline

Heavy metal ions and antibiotics were simultaneously detected in authentic water systems. This research, for the first time, employed synthesized sophorolipid-modified fly ash(SFA) to eliminate tetracycline(TC) and lead(Pb2+) from wastewater. Various characterization techniques, including SEM-EDS, FTIR, XPS, BET, and Zeta, were employed to investigate the properties of the SFA. The results showed that the sophorolipid modification significantly improved the fly ash's adsorption capacities for the target pollutants. The static adsorption experiments elucidated the adsorption behaviors of SFA towards TC and Pb2+ in single and binary systems, highlighting the effects of different Environmental factors on the adsorption behavior in both types of systems. In single systems, SFA exhibited a maximum adsorption capacity of 128.96 mg/g for Pb2+ and 55.57 mg/g for TC. The adsorption of Pb2+ and TC followed pseudo-second-order kinetics and Freundlich isotherm models. The adsorption reactions are endothermic and occur spontaneously. SFA demonstrates varying adsorption mechanisms for two different types of pollutants. In the case of Pb2+, the primary mechanisms include ion exchange, electrostatic interaction, cation-π interaction, and complexation, while TC primarily engages in hydrogen bonding, π-π interaction, and complexation. The interaction between Pb2+ and TC has been shown to improve adsorption efficiency at low concentrations. Additionally, adsorption-desorption experiments confirm the reliable cycling performance of modified fly ash, highlighting its potential as a cost-effective and efficient adsorbent for antibiotics and heavy metals.

Resource utilization of medical waste incineration fly ash to activate peroxydisulfate for tetracycline degradation: Synergy between adsorption and PDS activation

Medical waste incineration fly ash (MWI FA) is classified as a hazardous solid waste. Therefore, the development of recycling technologies to convert MWI FA into useful products is necessary and challenging. In this study, we developed a sustainable approach for preparing a catalyst through the pyrolysis of water-washed MWI FA (WW FA-x, where x corresponds to the pyrolysis temperature). Subsequently, it was applied as a potent peroxydisulfate (PDS) activator to remove tetracycline (TC) from water. The results showed that the WW FA-800 exhibited remarkable adsorption performance as well as highly efficient catalytic activation of PDS, with a 115 mg/g maximum TC adsorption capacity and 93.5% (reaction kinetic rate = 315 μmol/g/h) TC removal within 60 min. A synergistic effect was achieved by adsorption and PDS activation. TC degradation was primarily driven by non-radical (1O2 and electron transfer) processes. WW FA-800 possesses multiple active sites, including defects, π-π*, O-CO groups, Fe0, and Cu(I). Three possible pathways for TC decomposition have been proposed, with the majority of intermediates exhibiting less toxicity than TC. Furthermore, the WW FA/PDS system exhibited an excellent anti-interference ability, and universality in the degradation of various organic contaminants. Notably, energy consumption was minimal, approximately 2.80 kWh/(g·TC), and the leachability of heavy metals in the WW FA-800 was within acceptable limits. This study provides a MWI FA recycling route for the development of highly active catalysts.

Norfloxacin adsorption by urban green waste biochar: characterization, kinetics, and mechanisms

Biochar, as a potential adsorbent, has been widely employed to remove pollutants from sewage. In this study, a lignin-based biochar (CB-800) was prepared by a simple high-temperature pyrolysis using urban green waste (Cinnamomum camphora leaves) as a feedstock to remove norfloxacin (NOR) from water. Batch adsorption test results indicated that CB-800 had a strong removal capacity for NOR at a wide range of pH values. The maximum adsorption achieved in the study was 50.90 ± 0.64 mg/g at 298 K. The pseudo-first and second-order kinetic models and the Dubinin-Radushkevich isotherm fitted the experimental data well, indicating that NOR adsorption by CB-800 was a complex process involving both physi-sorption and chemi-sorption. The physical properties of CB-800 were characterized by SEM and BET. The mesoporous structures were formed hierarchically on the surface of CB-800 (with an average pore size of 2.760 nm), and the spatial structure of NOR molecules was more easily adsorbed by mesoporous structures. Combined with Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis, it was showed that the main NOR adsorption mechanisms by CB-800 included ion exchange, π-electron coordination, hydrogen bonding, and electrostatic adsorption. Meanwhile, the reduction of C = O and pyridine nitrogen, and the presence of C-F2, also indicated the occurrence of substitution, addition, and redox. This study not only determined the reaction mechanism between biochar and NOR, but also provides guidance to waste managers for the removal of NOR from water by biochar. It is envisaged that the results will broaden the utilization of urban green waste.

Definitive Review of Nanobiochar

Nanobiochar is an advanced nanosized biochar with enhanced properties and wide applicability for a variety of modern-day applications. Nanobiochar can be developed easily from bulk biochar through top-down approaches including ball-milling, centrifugation, sonication, and hydrothermal synthesis. Nanobiochar can also be modified or engineered to obtain "engineered nanobiochar" or biochar nanocomposites with enhanced properties and applications. Nanobiochar provides many fold enhancements in surface area (0.4-97-times), pore size (0.1-5.3-times), total pore volume (0.5-48.5-times), and surface functionalities over bulk biochars. These enhancements have given increased contaminant sorption in both aqueous and soil media. Further, nanobiochar has also shown catalytic properties and applications in sensors, additive/fillers, targeted drug delivery, enzyme immobilization, polymer production, etc. The advantages and disadvantages of nanobiochar over bulk biochar are summarized herein, in detail. The processes and mechanisms involved in nanobiochar synthesis and contaminants sorption over nanobiochar are summarized. Finally, future directions and recommendations are suggested.

Dual valorization of coastal biowastes for tetracycline remediation and biomethane production: A composite assisted anaerobic digestion

Harnessing coastal biowaste for dual valorization in water treatment and biofuel production holds paramount importance for sustainability and resource challenges. This study investigated the potential of engineered composite (CABC) derived from coastal biowaste-based materials for tetracycline (TC) removal and biomethane production. High-yield calcium carbonate (CaCO3; 95.65%; bivalve shells) and biochar (GA-BC; 41.50%; green macroalgae) were produced and used as precursors for CABC. The characterization results revealed presence of β-CaCO3 and ν2-CO3 aragonite in CaCO3, and composite homogeneity was achieved. The CABC exhibited a maximum TC sorption capacity of 342.26 mg/g via synergistic sorption mechanisms (i.e., surface/pore filling, electrostatic attraction, calcium ion exchange, and chelation). Supplementation of anaerobic digestion process with GA-BC, CaCO3, and CABC was investigated via three consecutive cycles. Biochemical methane potential of glucose as a sole substrate was increased from 157.50 to 217.00, 187.00, and 259.00 mL-CH4, while dual substrate (glucose+TC) treatment was increased from 94.5 to 146.5, 129.0, and 153.00 mL-CH4 for GA-BC, CaCO3, and CABC, respectively. Moreover, system stability and TC removal were increased with the addition of GA-BC (40.90%), CaCO3 (16.30%), and CABC (53.70%). Therefore, this study exemplifies the circular bioeconomy approach, demonstrating the sustainable use of biowaste-derived composite for water treatment and biofuel production.

Efficient Adsorption of Nitrogen and Phosphorus in Wastewater by Biochar

Nitrogen and phosphorus play essential roles in ecosystems and organisms. However, with the development of industry and agriculture in recent years, excessive N and P have flowed into water bodies, leading to eutrophication, algal proliferation, and red tides, which are harmful to aquatic organisms. Biochar has a high specific surface area, abundant functional groups, and porous structure, which can effectively adsorb nitrogen and phosphorus in water, thus reducing environmental pollution, achieving the reusability of elements. This article provides an overview of the preparation of biochar, modification methods of biochar, advancements in the adsorption of nitrogen and phosphorus by biochar, factors influencing the adsorption of nitrogen and phosphorus in water by biochar, as well as reusability and adsorption mechanisms. Furthermore, the difficulties encountered and future research directions regarding the adsorption of nitrogen and phosphorus by biochar were proposed, providing references for the future application of biochar in nitrogen and phosphorus adsorption.

Dyeing sludge-derived biochar for efficient removal of antibiotic from water

Adsorption is one of the most effective methods for ecotoxic antibiotics removal, while developing high-performance adsorbents with excellent adsorption capacity is indispensable. As the unavoidable by-product of wastewater, sewage sludge has dual properties of pollution and resources. In this study, dyeing sludge waste was converted to biochar by KOH activation and pyrolysis, and used as an efficient adsorbent for aqueous antibiotics removal. The optimized dyeing sludge-derived biochar (KSC-8) has excellent specific surface area (1178.4 m2/g) and the adsorption capacity for tetracycline (TC) could reach up to 1081.3 mg/g, which is four and five times higher than those without activation, respectively. The PSO (pseudo-second-order) kinetic model and the Langmuir isotherm model fitted better to the experimental data. The obtained KSC-8 has stabilized adsorption capacity for long-term fixed-bed experiments, and maintained 86.35% TC removal efficiency after five adsorption-regeneration cycles. The adsorption mechanism involves electrostatic attraction, hydrogen bonding, π-π interactions and pore filling. This work is a green and eco-friendly way as converting the waste to treat waste in aiming of simultaneous removal of antibiotics and resource recovery of dyeing sludge.

Development of calcium phosphate-chitosan composites with improved removal capacity toward tetracycline antibiotic: Adsorption and electrokinetic properties

Two eco-friendly and highly efficient adsorbents, namely brushite-chitosan (DCPD-CS), and monetite-chitosan (DCPA-CS) composites were synthesized via a simple and low-cost method and used for tetracycline (TTC) removal. The removal behavior of TTC onto the composite particles was studied considering various parameters, including contact time, pollutant concentration, and pH. The maximum TTC adsorption capacity was 138.56 and 112.48 mg/g for the DCPD-CS and DCPA-CS, respectively. Increasing the pH to 11 significantly enhanced the adsorption capacity to 223.84 mg/g for DCPD-CS and 205.92 mg/g for DCPA-CS. The antibiotic adsorption process was well-fitted by the pseudo-second-order kinetic and Langmuir isotherm models. Electrostatic attractions, complexation, and hydrogen bonding are the main mechanisms governing the TTC removal process. Desorption tests demonstrated that the (NH4)2HPO4 solution was the most effective desorbing agent. The developed composites were more efficient than DCPD and DCPA reference samples and could be used as valuable adsorbents of TTC from contaminated wastewater.

Two-step pyrolytic preparation of biochar for the adsorption study of tetracycline in water

In this study, cow dung biomass was converted into biochar (BC). BC900 was obtained through one-step pyrolysis at 900 °C, while BC700-900 and BC900-700 were obtained via two-step pyrolysis at temperature ranges of 700-900 °C and 900-700 °C, respectively. The primary objective was to investigate the adsorption performance and application value of BCs for tetracycline (TC) in water. The samples underwent characterization using scanning electron microscopy and mapping analysis, Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. Subsequently, the effects of reaction time, adsorbent dosage, temperature, pH, and ionic strength were analyzed. Based on the fitting results of adsorption kinetics, the pyrolytic BCs exhibited a better fit with the pseudo-secondary kinetic model. The adsorption isotherm indicated monolayer adsorption on the surface of the adsorbents, with maximum adsorption capacities of 158.93 mg/g for BC900-700, 150.15 mg/g for BC700-900, and 142.56 mg/g for BC900, respectively. Furthermore, results from simulated wastewater and regeneration experiments demonstrated that BC900-700 exhibited not only excellent adsorption performance in wastewater but also remarkable regeneration capabilities. The two-step pyrolysis BCs in this study displayed a higher adsorption capacity compared to the one-step pyrolysis BCs in practical applications. These findings provide insights for further exploring the adsorption mechanism and optimizing the process.

Enhanced Adsorptive Removal of Tetracycline by Phosphomolybdic Acid-Modified Low-Temperature Sludge Biochar

Increasing the adsorption capacity and reducing the energy consumption of sludge biochar during preparation is important. In this study, a new modification method was developed to prepare phosphomolybdic acid-modified sludge biochar through the low-temperature pyrolysis of sewage sludge using phosphomolybdic acid as a modifier. Tetracycline was used to assess the adsorption performance of sludge biochar, and phosphomolybdic acid-modified sludge biochar was prepared at different temperatures. The results showed that the adsorption capacity of sludge biochar improved from 84.49 to 120.86 mg/g through modification with phosphomolybdic acid at 200 °C. The maximum adsorption capacities of phosphomolybdic acid-modified sludge biochar (200 °C pyrolysis temperature) at 298, 308, and 318 K were 283.87, 421.39, and 545.48 mg/g, respectively. Both liquid film and intraparticle diffusion were the main rate-limiting steps of tetracycline adsorption by phosphomolybdic acid-modified sludge biochar. Furthermore, the adsorption of tetracycline by phosphomolybdic acid-modified sludge biochar was mainly attributed to π-π interactions, electrostatic interactions, hydrogen bonding, and pore filling.

Simultaneous removal of phosphate and tetracycline using LaFeO3 functionalised magnetic biochar by obtained ultrasound-assisted sol-gel pyrolysis: Mechanisms and characterisation

Excessive phosphate and tetracycline (TC) contaminants pose a serious risk to human health and the ecological environment. As such exploring the simultaneous adsorption of phosphate and TC is garnering increasing attention. In this study, an efficient lanthanum ferrate magnetic biochar (FLBC) was synthesised from crab shells using an ultrasound-assisted sol-gel method to study its performance and mechanisms for phosphate and TC adsorption in aqueous solutions in mono/bis systems. According to the Langmuir model, the developed exhibited a maximum adsorption capacity of 65.62 mg/g for phosphate and 234.1 mg/g for TC (pH:7.0 ± 0.1, and 25 °C). Further, it exhibited high resistance to interference and pH suitability. In practical swine wastewater applications, whereby the concentrations of phosphate and TC are 37 and 19.97 mg/L, respectively, the proposed material demonstrated excellent performance. In addition, electrostatic adsorption, chemical precipitation and ligand exchange were noted to be the main mechanisms for phosphate adsorption by FLBC, whereas hydrogen bonding and π-π interaction were the main adsorption mechanisms for TC adsorption. Therefore, this study successfully prepared a novel and efficient adsorbent for phosphate and TC.

Fe-pillared montmorillonite functionalized chitosan/gelatin foams for efficient removal of organic pollutants by integration of adsorption and Fenton degradation

A Fe-pillared montmorillonite (Fe-MMT) functionalized bio-based foam (Fe-MMT@CS/G) was developed by using chitosan (CS) and gelatin (G) as the matrix for high-efficiency elimination of organic pollutants through the integration of adsorption and Fenton degradation. The results showed that the mechanical properties of as-obtained foam were strengthened by the addition of certain amounts of Fe-MMT. Interestingly, Fe-MMT@CS/G displayed efficient adsorption ability for charged pollutants under a wide range of pH. The adsorption processes of methyl blue (MB), methylene blue (MEB) and tetracycline hydrochloride (TCH) on Fe-MMT@CS/G were well described by the Freundlich isotherm model and pseudo-second-order kinetic model. The maximum adsorption capacities were 2208.24 mg/g for MB, 1167.52 mg/g for MEB, and 806.31 mg/g for TCH. Electrostatic interactions, hydrogen bonding and van der Waals forces probably involved the adsorption process. As expected, this foam could exhibit better removal properties toward both charged and uncharged organic pollutants through the addition of H2O2 to trigger the Fenton degradation reaction. For non-adsorbable and uncharged bisphenol A (BPA), the removal efficiency was dramatically increased from 1.20 % to 92.77 % after Fenton degradation. Additionally, it presented outstanding recyclability. These results suggest that Fe-MMT@CS/G foam is a sustainable and efficient green material for the alleviation of water pollution.

Adsorption characterization of tetracycline antibiotics on alkali-functionalized rice husk biochar and its evaluation on phytotoxicity to seed germination

This work presented adsorption characteristics of tetracycline antibiotics (TCs) on KOH-functionalized rice husk biochar pyrolyzed at 700 °C (KBC700) and evaluation on phytotoxicity of TCs-adsorbed aqueous phase to seed germination. Specifically, KBC700 gained eightfold rise in specific surface area by KOH activation. Predominant monolayer chemisorption helped KBC700 control TCs, and spontaneous and exothermic features were identified by thermodynamic studies. KBC700 could efficiently work in a wide pH range (4.5 ~ 9.5), as well as in simulated eutrophic water and co-existing cationic solution. Humic acid exerted negative impact on TCs disposal. Outstanding regeneration capability and stability were also found during adsorption-desorption cycles. Mechanism discussion implied predominant pore filling and π-π interaction accompanied by hydrogen bonding and electrostatic interaction involved in TCs-removal process. Importantly, less phytotoxicity to seed germination was found in TCs-adsorbed aqueous phase. Collectively, these findings contribute to adsorption properties recognition and subsequent application for KOH-modified rice rusk biochar in environmental TCs remediation.

Coupled sorptive and oxidative antimony(III) removal by iron-modified biochar: Mechanisms of electron-donating capacity and reactive Fe species

Sorption and oxidation are two potential pathways for the decontamination of trivalent antimony (Sb(III))-bearing water, using iron (Fe)-modified biochar (FeBC). Here we investigated the sorption and oxidation behavior of FeBC for Sb(III) in aqueous solutions. Results revealed that Sb(III) removal by FeBC was significantly improved showing the maximum Sb(III) sorption (64.0 mg g-1). Density functional theory (DFT) calculations indicated that magnetite (Fe3O4) in FeBC offered a sorption energy of -0.22 eV, which is 5 times that of non-modified biochar. With the addition of peroxymonosulfate (PMS), the sorption of Sb(III) on FeBC was 7 times higher than that on BC, indicating the sorption capacity of FeBC for Sb(III) could be substantially increased by adding oxidizing agents. Electrochemical analysis showed that Fe modification imparted FeBC higher electron-donating capacity than that of BC (0.045 v. s. 0.023 mmol e- (g biochar)-1), which might be the reason for the strong Sb(III) oxidation (63.6%) on the surface of FeBC. This study provides new information that is key for the development of effective biochar-based composite materials for the removal of Sb(III) from drinking water and wastewater. The findings from this study have important implications for protecting human health and agriculture.

A co-precipitation route for the preparation of eco-friendly Cu-Al-layered double hydroxides with efficient tetracycline degradation

The construction of novel efficient catalysts for the treatment of organic pollutants in the aqueous environment is essential. The lamellar-like Cu-Al layered double hydroxides (CuAl-LDHs) with various mole ratios were synthesized by a simple route of co-precipitation, and the corresponding degradation characteristic was tested for the removal of tetracycline (TC) using PMS activation. The degradation efficiency of TC over CuAl-LDHs increased up to 93% within 10 min for the Cu/Al mole ratio of 3:1 and almost not changed at a higher mole ratio. For further calcining the optimal catalyst at 300 ℃, the degradation efficiency of TC was found to be increased to 96%. Sulfuric radicals and singlet oxygen were analyzed to be the main reason for the change in degradation characteristics, which was proved by radical quenching experiments and electron paramagnetic resonance technique. The parameters including PMS concentration, catalyst dosage, and reaction temperature on the TC degradation as well as the degradation mechanism for PMS activation were elaborated. The best proportion of CuAl-LDHs owned splendid stability and catalytic activity after reusing, which showed enormous potential in practical application.

Characteristics of a Novel Decomposed Corn Straw-Sludge Biochar and Its Mechanism of Removing Cadmium from Water

The utilization of high-efficiency adsorption materials to reduce cadmium pollution in aquatic environments is the focus of current environmental remediation research. Straw waste and sludge, which are available in huge amounts, can be best utilized in the preparation of environmental remediation materials. In this study, six types of biochar (SBC, CBC, DBC, SD₁BC, S_RDBC, and S_CDBC) were prepared from straw and sludge by co-pyrolysis, and their cadmium adsorption mechanisms were explored. Cd(II) adsorption isotherms and kinetics on the biochar were determined and fitted to different models. Kinetic modeling was used to characterize the Cd(II) adsorption of biochar, and findings revealed the process of sorption followed pseudo-second-order kinetics (R² > 0.96). The Langmuir model accurately represented the isotherms of adsorption, indicating that the process was monolayer and controlled by chemical adsorption. S_CDBC had the highest capacity for Cd(II) adsorption (72.2 mg g^-1), 1.5 times greater than that of sludge biochar, and 3 times greater than that of corn straw biochar. As the pH level rose within the range of pH 5.0 to 7.0 and the ionic strength decreased, the adsorption capacity experienced an increase. S_CDBC contained CaCO₃ mineral crystals before Cd(II) adsorption, and CdCO₃ was found in S_CDBC after adsorbing Cd(II) via X-ray diffraction analysis; the peak of Cd could be observed by Fourier transform infrared spectroscopy after the adsorption of Cd(II). The possible adsorption of Cd(II) by S_CDBC occurred primarily via surface complexation with active sorption sites, precipitation with inorganic anions, and coordination with π electrons. Collectively, the study suggested that the six types of biochar, particularly S_CDBC, could be used as highly efficient adsorbents for Cd(II) removal from aquatic environments.

Removal of low-concentration tetracycline from water by a two-step process of adsorption enrichment and photocatalytic regeneration

Developing a high-performance method that can effectively control pollution caused by low concentrations of antibiotics is urgently needed. Herein, a novel three-dimensional PPy/Zn₃In₂S₆ nanoflower composites were prepared for the comprehensive treatment of low-concentration tetracycline (Tc) hydrochloride in wastewater based on the adsorption/photocatalysis of Zn₃In₂S₆ and the conductivity of PPy. In this preparation method, adsorption enrichment and photocatalytic regeneration were conducted in two steps, eliminating the dilution and dispersion effects of aqueous solvents on photocatalytic species and antibiotics. Results showed that Zn₃In₂S₆ could effectively adsorb 87.85% of Tc at pH of 4.5 and photocatalytically degrade Tc at pH of 10.5. Although the adsorption capacity of Zn₃In₂S₆ was slightly reduced after being combined with PPy, its photocatalytic efficiency was substantially enhanced. Specifically, 0.5%PPy/Zn₃In₂S₆ could degrade 99.92% of the surface-enriched Tc in 1 h and induce the regeneration of the adsorption sites. Furthermore, the adsorption capacity remained above 85% even after recycling PPy/Zn₃In₂S₆ ten times. The photocatalytic degradation mechanism analysis revealed that the enrichment of Tc on 0.5%PPy/Zn₃In₂S₆ negatively impacts the photocatalytic efficiency, while •O₂^- and •OH radicals were the main oxidative species that played an important role in the photoregeneration process.

Hierarchically porous graphene-like biochar for efficient removal of aromatic pollutants and their structure-performance relationship: A combined experimental, MD and DFT study

Development of high-efficiency adsorbents and exploration of the structure-performance relationship holds exciting implications for removal of aromatic pollutants (APs) from water. Herein, hierarchically porous graphene-like biochars (HGBs) were successfully prepared by K₂CO₃ simultaneous graphitization and activation of Physalis pubescens husk. The HGBs possess high specific surface area (1406-2369.7 m²/g), hierarchically meso-/microporous structure and high graphitization degree. The optimized HGB-2-9 sample exhibits rapid adsorption equilibrium time (t_e) and high adsorption capacities (Q_e) for seven widely-used persistent APs with different molecular structures (e.g., phenol: t_e = 7 min, Q_e = 191.06 mg/g; methylparaben: t_e = 12 min Q_e = 482.15 mg/g). HGB-2-9 also shows a wide pH (3-10) suitability and good ionic strength (0.01-0.5 M NaCl) resistance properties. The effects of the physicochemical properties of HGBs and APs on the adsorption performance were deeply investigated by the adsorption experiments, molecular dynamics (MD) and density functional theory (DFT) simulation. The results demonstrate that the large specific surface area, high graphitization degree and hierarchically porous structure of HGB-2-9 can supply more active sites on accessible surface and facilitate the transport of APs. And the aromaticity and hydrophobicity of APs play the more crucial roles during the adsorption process. Besides, the HGB-2-9 presents good recyclability and high removal efficiency for APs in various real water, which further confirms its potential for practical applications.

One-pot preparation of layered double oxides-engineered biochar for the sustained removal of tetracycline in water

Tetracycline (TC) and sugarcane bagasse had both exerted enormous strain on environmental security. In this work, new composite adsorbent designed by impregnating bio-waste bagasse with magnesium-aluminum layered double oxides (BC-MA) was innovatively brought forward for TC removal. Benefiting from the abundant adsorption sites supplied by developed pores structure (0.308 cm³·g^-1), enlarged surface area (256.8 m²·g^-1) and reinforced functional groups, the maximum adsorption amount of BC-MA for TC reached 250.6 mg g^-1. Moreover, BC-MA displayed desirable adsorption capacity in diverse water environments coupled with excellent sustainable regeneration ability. The absorption process of TC by BC-MA was spontaneous and endothermic, and the pivotal rate-limiting stage pertained to intraparticle diffusion. The mechanisms proposed here mainly concerned π-π interactions, pore filling, complexation and hydrogen bonding. These findings suggested that the synthesis of modified biochar from bagasse would offer new opportunities for simultaneous waste resource reuse and water pollution control.

Efficient Adsorption of Tebuconazole in Aqueous Solution by Calcium Modified Water Hyacinth-Based Biochar: Adsorption Kinetics, Mechanism, and Feasibility

The application of fungicides (such as tebuconazole) can impose harmful impacts on the ecosystem and humans. In this study, a new calcium modified water hyacinth-based biochar (WHCBC) was prepared and its effectiveness for removing tebuconazole (TE) via adsorption from water was tested. The results showed that Ca was loaded chemically (CaC₂O₄) onto the surface of WHCBC. The adsorption capacity of the modified biochar increased by 2.5 times in comparison to that of the unmodified water hyacinth biochar. The enhanced adsorption was attributed to the improved chemical adsorption capacity of the biochar through calcium modification. The adsorption data were better fitted to the pseudo-second-order kinetics and the Langmuir isotherm model, indicating that the adsorption process was dominated by monolayer adsorption. It was found that liquid film diffusion was the main rate-limiting step in the adsorption process. The maximum adsorption capacity of WHCBC was 40.5 mg/g for TE. The results indicate that the absorption mechanisms involved surface complexation, hydrogen bonding, and π-π interactions. The inhibitory rate of Cu²⁺ and Ca²⁺ on the adsorption of TE by WHCBC were at 4.05-22.8%. In contrast, the presence of other coexisting cations (Cr⁶⁺, K⁺, Mg²⁺, Pb²⁺), as well as natural organic matter (humic acid), could promote the adsorption of TE by 4.45-20.9%. In addition, the regeneration rate of WHCBC was able to reach up to 83.3% after five regeneration cycles by desorption stirring with 0.2 mol/L HCl (t = 360 min). The results suggest that WHCBC has a potential in application for removing TE from water.

Adsorption of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar to Sb3+: Application of DFT calculation

The pollution and harm of Sb³⁺ to aquatic systems is a global problem, so Sb³⁺ removal from the water environment to make sure environment safety and human beings wellbeing is of urgency. This study explored the effect of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar (CEBC) on adsorbing Sb³⁺ through batch adsorption experiments. The experiments indicated CEBC's maximum adsorption capacity to Sb³⁺ is 170.15 mg·g^-1. Meanwhile, the capacity of the original biochar (EBC) is only 9.97 mg·g^-1. Compared with EBC, CEBC contains more functional groups, such as CO, -OH and -NH₂. In addition, the pseudo-second-order kinetic model and the Langmuir model are fit to describe the kinetics and isotherms of adsorption of CEBC to Sb³⁺, which suggests that the adsorption of CEBC to Sb³⁺ is dominated by monolayer chemisorption. Density functional theory (DFT) calculations confirmed that the chelation between -NH₂ and Sb³⁺ is of significance in the adsorption process of CEBC. DFT calculations also found that the newly added -OH and CO in EBC have a synergistic enhancement effect on the absorption of Sb³⁺. The mechanism of CEBC absorbing Sb³⁺ includes electrostatic interactions, pore filling, Л-Л interactions, hydrogen bonding, functional group complexation, chelation, and oxidation. CEBC has an excellent anti-interference ability for inorganic anions (NO₃^-, SO₄^2- and Cl^-) and can also use the coexisting HA to improve its adsorption performance. In addition, CEBC has better mitigation of Sb³⁺ on the performance of Sb³⁺ about its secondary release and good reproducibility, which indicates that CEBC is a viable Sb³⁺ adsorbent.

Pyrolysis temperature affects the physiochemical characteristics of lanthanum-modified biochar derived from orange peels: Insights into the mechanisms of tetracycline adsorption by spectroscopic analysis and theoretical calculations

Biochar (BC) derived from orange peels was modified using LaCl₃ to enhance its tetracycline (TC) adsorption capacity. SEM-EDS, FT-IR, XRD, and BET were used to characterize the physiochemical characteristics of La-modified biochar (La-BC). Batch experiments were conducted to investigate the effects of several variables like pyrolysis temperature, adsorbent dosage, initial pH, and coexisting ions on the adsorption of TC by La-BC. XPS and density functional theory (DFT) were used to elucidate the TC adsorption mechanism of La-BC. The results demonstrated that La was uniformly coated on the surface of the La-BC. The physiochemical characteristics of La-BC highly depended on pyrolysis temperature. Higher temperature increased the specific surface area and functional groups of La-BC, thus enhancing its TC adsorption capacity. La-BC prepared at 700 °C (BC@La-700) achieved the maximum adsorption capacity of 143.20 mg/g, which was 6.8 and 4.6 times higher than that of BC@La-500 and BC@La-600, respectively. The mechanisms of TC adsorption by La-BC were most accurately described by the pseudo-second-order kinetic model. Furthermore, the adsorption isotherm of La-BC was consistent with the Freundlich model. BC@La-700 achieved good TC adsorption efficiencies even at a wide pH range (pH 4-10). Humic acid significantly inhibited TC adsorption by La-BC. The presence of coexisting ions (NH₄⁺, Ca²⁺, NO₃^-) did not significantly affect the adsorption capacity of La-BC, particularly BC@La-700. Moreover, BC@La-700 also exhibited the best recycling performance, which achieved relative high adsorption capacity even after 5 cycles. The XPS results showed that π-π bonds, oxygen-containing functional groups, and La played a major role in the adsorption of TC on La-BC. The result of DFT showed that the adsorption energy of La-BC was the greatest than that of other functional groups on biochar. Collectively, our findings provide a theoretical basis for the development of La-BC based materials to remove TC from wastewater.

Phosphoric acid-activated biochar derived from sunflower seed husk: Selective antibiotic adsorption behavior and mechanism

In recent years, the unnecessary overuse of antibiotics has increased globally, resulting in antibiotic contamination of water, which has become a significant environmental concern. This study aims to examine the adsorption behavior of antibiotics (Tetracycline TC, Ciprofloxacin CIP, Ibuprofen IBP, and Sulfamethoxazole SMX) onto H₃PO₄-activated sunflower seed husk biochar (PSF). The results demonstrated that H₃PO₄ could enhance the specific surface area (378.8 m²/g) and create a mesoporous structure of biochar. The adsorption mechanism was investigated using kinetic models, isotherms, and thermodynamics. The maximum adsorption capacities (q_max) of TC, CIP, SMX, and IBP are 429.3, 361.6, 251.3, and 251.1 mg g^-1, respectively. The adsorption mechanism of antibiotics on PSF was governed by complex mechanisms, including chemisorption, external diffusion, and intraparticle diffusion. This research provides an environmentally friendly method for utilizing one of the agricultural wastes for the removal of a variety of antibiotics from the aquatic environment.

Waste Adsorbent-Derived Interconnected Hierarchical Attapulgite@Carbon/NiCo Layered Double Hydroxide Nanocomposites for Advanced Supercapacitors

The attapulgite@carbon/NiCo layered double hydroxide nanocomposites based on waste adsorbents are manufactured via simple and eco-friendly calcination and hydrothermal methods, by which they would be considerable electrode materials for advanced supercapacitors. To achieve sustainable development, the spent tetracycline-loaded attapulgite can act as a cost-effective available carbon source as well as a matrix material for carbon species and NiCo layered double hydroxide simultaneously. A controlled amount of attapulgite@carbon could be used to regulate the electrochemical properties of nanocomposites. The generated electrodes possess superior electrochemical properties with a specific capacitance of 2013.8 F g^-1 at 0.5 A g^-1, a retention rate of 87.7% at 5 A g^-1, and a cyclic stability of 64.9% for 4000 cycles at 5 A g^-1. Thus, the asymmetric supercapacitor device assembled with attapulgite@carbon/NiCo layered double hydroxide nanocomposites||active carbon shows a maximum capacitance of 231.3 F g^-1 at 0.5 A g^-1, with a preeminent energy density of 82.2 Wh kg^-1 when its power density is 4318 W kg^-1. This approach would contribute to the development of supercapacitors in an efficient and effective manner, as well as provide a feasible strategy for solving tetracycline pollution and recycling waste adsorbents to achieve sustainable development.

Construction of an S-scheme TiOF2/HTiOF3 heterostructures with abundant OVs and OH groups: Performance, kinetics and mechanism insight

Developing efficient photocatalysts is of crucial significance for the development of photocatalysis techniques. In this work, an S-scheme alkaline-washed TiOF₂/HTiOF₃(OHTOF) heterostructures with abundant Oxygen vacancies (Ovs) and OH groups was successfully constructed and used to remedy antibiotic wastewater under simulated sunlight. The generation of HTiOF₃ was induced by g-C₃N₄ regulation. The results displayed that OHTOF15 composite possessed the best photocatalytic performance, which could degrade 94.2% tetracyclinehydrochloride (TCH) at a rate speed constant of 1.077 min^-1 in 2.5 h. The after-alkali-washing process increased the concentration of OH groups and Ovs defects, and greatly enlarged the surface area. The abundant Ovs and OH groups were conducive to the formation of free radicals' and the transport of charge carriers. Compared with the pristine TiOF₂, the absorption sidebands of OHTOF series were greatly red-shifted, which indicated that the increase of OH groups and the etching of the morphology of OHTOF further enhanced its visible-light harvesting ability. Furthermore, the metal cycle of the variable state of Ti⁴⁺/Ti³⁺ in OHTOF15 compensated for the charge balance and promoted the efficient separation of the carriers. Additionally, the apparent quantum efficiency (AQE) of the TCH photodegradation system based on Chemical Oxygen Demand (COD) removal efficiency was calculated to be 0.32%. It was confirmed that the electron transport path in TiOF₂/HTiOF₃ nanocomposites system followed the S-scheme type, which increased the charge carriers' separation rate and maintained a strong redox capacity. This work could provide some enlightenment for the construction of the semiconducting heterojunction and controllable surface defects engineering.

Enhanced Adsorption and Evaluation of Tetracycline Removal in an Aquatic System by Modified Silica Nanotubes

In the present study, a nanocomposite adsorbent based on mesoporous silica nanotubes (MSNTs) loaded with 3-aminopropyltriethoxysilane (3-APTES@MSNTs) was synthesized. The nanocomposite was employed as an effective adsorbent for the adsorption of tetracycline (TC) antibiotics from aqueous media. It has an 848.80 mg/g maximal TC adsorption capability. The structure and properties of 3-APTES@MSNT nanoadsorbent were detected by TEM, XRD, SEM, FTIR, and N₂ adsorption-desorption isotherms. The later analysis suggested that the 3-APTES@MSNT nanoadsorbent has abundant surface functional groups, effective pore size distribution, a larger pore volume, and a relatively higher surface area. Furthermore, the influence of key adsorption parameters, including ambient temperature, ionic strength, initial TC concentration, contact time, initial pH, coexisting ions, and adsorbent dosage, had also been investigated. The 3-APTES@MSNT nanoadsorbent's ability to adsorb the TC molecules was found to be more compatible with Langmuir isothermal and pseudo-second-order kinetic models. Moreover, research on temperature profiles pointed to the process' endothermic character. In combination with the characterization findings, it was logically concluded that the 3-APTES@MSNT nanoadsorbent's primary adsorption processes involved interaction, electrostatic interaction, hydrogen bonding interaction, and the pore-fling effect. The synthesized 3-APTES@MSNT nanoadsorbent has an interestingly high recyclability of >84.6 percent up to the fifth cycle. The 3-APTES@MSNT nanoadsorbent, therefore, showed promise for TC removal and environmental cleanup.

Fe-Al bimetallic oxides functionalized-biochar via ball milling for enhanced adsorption of tetracycline in water

The clusters formed by modified materials on its surface makes the application of functionalized biochars in adsorption face a great challenge. Here, a facile ball milling technology was innovatively proposed to tailor Fe-Al oxides-laden bagasse biochar to fabricate a novel adsorbent (BMFA-BC). Benefited from the increased exposure of Fe-Al oxides and, more importantly, enhanced functional groups by ball milling, the adsorption capacity of BMFA-BC for aqueous tetracycline reached up to 116.6 mg g^-1 at 298 K. And the adsorption performance was temperature-dependent. Characterization analysis, batch sorption (thermodynamics, kinetics, isotherms, chemical factors) as well as data modeling illustrated that this superior adsorption ability could be attributed to π-π conjugation, H-bonding, complexation as well as pore filling. BMFA-BC displayed good adsorption capacity in multiple aqueous environments. The excellent regeneration ability, magnetic susceptibility ensured its viability for sustainable pollutants removal. These superiorities revealed that BMFA-BC was a suitable sorbent for antibiotics elimination.

The effect of Fe-Zn mole ratio (2:1) bimetallic nanoparticles supported by hydroxyethyl cellulose/graphene oxide for high-efficiency removal of doxycycline

In this research, Hydroxyethyl cellulose - graphene oxide HEC-GO and HEC-GO/Fe-Zn mole ratio (2:1) nanocomposite as adsorbents were fabricated by crosslinking ethylene glycol dimethacrylate (EGDMA) to study the thermodynamic, kinetic and isotherm of doxycycline antibiotic adsorption. The morphology and structure of the adsorbents were analyzed by Fourier transform infrared spectroscopy (FT-IR), Field Emission Scanning Electron Microscopy with Energy Dispersive X-Ray Spectroscopy (FE-SEM- EDX), and Transmission electron microscopy (TEM). The adsorption behavior of doxycycline (DOX) was studied with different parameters including doxycycline concentration, pH, the dose of adsorbent (HEC-GO and HEC-GO/Fe-Zn, mole ratio (2:1)), contact time, and temperature. The optimal conditions for the removal of DOX are pH = 3.0, contact time 100 min, and 20 min for HEC-GO and HEC-GO/Fe-Zn mole ratio (2:1). The removal percentage for HEC-GO and HEC-GO/Fe-Zn mole ratio (2:1) was 97% and 95.5%, respectively. Equilibrium adsorption isotherms such as the Langmuir, Freundlich, and Temkin models were analyzed according to the experimental data. Also, four adsorption kinetics were investigated for removing DOX. The Langmuir isotherm and pseudo-second-order kinetic models provided the best fit for experimental data for HEC-GO and HEC-GO/Fe-Zn mole ratio (2:1). Thermodynamic data showed that negative values of Gibbs free energy (ΔG°) and the negative value of enthalpy (ΔH°) of the adsorption process for adsorbents. It means that DOX removal was a spontaneous and exothermic reaction.

Biochar for the Removal of Emerging Pollutants from Aquatic Systems: A Review

Water contaminated with emerging pollutants has become a serious environmental issue globally. Biochar is a porous and carbon-rich material produced from biomass pyrolysis and has the potential to be used as an integrated adsorptive material. Many studies have shown that biochar is capable to adsorb emerging pollutants from aquatic systems and could be used to solve the water pollution problem. Here, we provided a dual perspective on removing emerging pollutants from aquatic systems using biochar and analyzed the emerging pollutant removal efficiency from the aspects of biochar types, pollutant types and coexistence with heavy metals, as well as the associated mechanisms. The potential risks and future research directions of biochar utilization are also presented. This review aims to assist researchers interested in using biochar for emerging pollutants remediation in aquatic systems and facilitate research on emerging pollutants removal, thereby reducing their environmental risk.

Enhanced adsorption capacity of tetracycline on porous graphitic biochar with an ultra-large surface area†

Excessive tetracycline in the water environment may lead to the harming of human and ecosystem health. Removing tetracycline antibiotics from aqueous solution is currently a most urgent issue. Porous graphitic biochar with an ultra-large surface area was successfully prepared by a one-step method. The effects of activation temperature, activation time, and activator dosage on the structural changes of biochar were investigated by scanning electron microscopy, Brunauer–Emmett–Teller, X-ray powder diffraction, and Raman spectroscopy. The effect of the structure change, adsorption time, temperature, initial pH, and co-existing ions on the tetracycline removal efficiency was also investigated. The results show that temperature had the most potent effect on the specific surface area, pore structure, and extent of graphitization. The ultra-large surface area and pore structure of biochar are critical to the removal of tetracycline. The q_e of porous graphitic biochar could reach 1122.2 mg g⁻¹ at room temperature. The calculations of density functional theory indicate that π–π stacking interaction and p–π stacking interaction can enhance the tetracycline adsorption on the ultra-large surface area of graphitic biochar.

1. A ultra-large surface area of porous graphitic biochar was successfully using corn starch and ZnCl₂ by a one-step method. 2. The adsorption capacity of tetracycline on the biochar could get 1122.2 mg g⁻¹ at room temperature.

Vitamin C modified crayfish shells biochar efficiently remove tetracycline from water: A good medicine for water restoration

In this study, crayfish shell biochar (CSB) was modified by introducing vitamin C (VC) with abundant surface functional groups. CSB was impregnated with VC at different ratios and its capacity to adsorb tetracycline (TC) from water was analyzed. The physicochemical properties of CSB were determined by N₂ adsorption-desorption isotherm analysis, X-ray diffraction, and Fourier transform infrared spectroscopy. The effects of various factors on adsorption such as the pH, TC concentration, time, and salt ion concentrations were also investigated. Based on the chemical structure of VC, VC can provide CSB with more oxygen-containing functional groups such as hydroxyl groups. The results showed that the CSB modified with VC (CSB-VC) exhibited excellent adsorption of TC, and CSB-VC₂ with an impregnation ratio of 2 (gVC/gCSB) had the greatest adsorption performance (saturated adsorption capacity, Q_m = 293.36 mg/g), whereas the adsorption performance of CSB alone was about 50% lower (Q_m = 172.16 mg/g). The optimal impregnation ratio VC improved the adsorption performance of CSB after modification to 70.4% of the original. Hydrogen bonding, p-p conjugation, pi-pi electron donor-acceptor effect, and π-π interactions were identified as the main adsorption mechanisms. CSB-VC₂ was highly effective over a wide range of pH values and at high ion concentrations. Experiments demonstrated the effective regeneration of the adsorbent after multiple cycles, thereby indicating its excellent reusability. It should be noted that the adsorption capacity was good under different water quality conditions, and thus it should exhibit stable adsorption performance under complex water environment conditions.

Modified biochar/humic substance/fertiliser compound soil conditioner for highly efficient improvement of soil fertility and heavy metals remediation in acidic soils

Fertile and uncontaminated soil with appropriate pH is crucial in terms of the agricultural sustainable development. Herein, a compound soil conditioner containing chitosan modified straw biochar (CBC), kitchen waste compost product-derived humic substance (HS), NPK compound fertiliser (NPK-CF) was prepared to simultaneously adjust acidic soil pH, improve fertility, and immobilize heavy metal. The results exhibited that the best Pb and NH₄⁺ adsorption performance was obtained in CBC with chitosan:biochar of 1:5. Then, the acid soil pH was improved from 5.03 to 6.66 in the presence of CBC/HS (5:5) with 3% addition weight (the mass ratio of conditioner to soil). Meanwhile, compared with the control, the contents of organic matter, available nitrogen, and available phosphorus significantly increased by 52.4%, 92.6%, and 136.3%, respectively. Moreover, Pb was highly efficient immobilised by CBC, and the concentration of Pb in the soil was decreased by 55.2%. The optimal growth trend of ryegrass was obtained in the presence of 3% addition weight (the mass ratio of conditioner to soil) CBC/HS (CBC:HS = 5:5) combined with 60% of the recommended NPK-CF application weight, which was mainly contributed by the improvement of the soil microbial abundance and community structure diversity. The addition of CBC/HS could effectively reduce the addition of NPK-CF and contribute to simultaneous controlling nitrogen loss, releasing phosphorus, immobilising Pb, adjusting pH, improving soil quality and controlling nonpoint pollution.

Facile Hydrothermal Synthesis of Cu2MoS4 and FeMoS4 for Efficient Adsorption of Chlortetracycline

Contamination of antibiotics in an aqueous environment has attracted wide attention. Developing high-efficiency adsorbents for antibiotics removal is urgent. In this work, two kinds of ternary transition metal chalcogenides—Cu2MoS4 and FeMoS4 with superior adsorption performance were prepared by a facile hydrothermal synthesis method. The microstructure and physicochemical properties of the adsorbents were analyzed by X-ray diffraction (XRD), X-ray photoelectron spectroscope (XPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The as-prepared Cu2MoS4 and FeMoS4 were found to have dramatic potential for the adsorption of chlortetracycline (CTC) in an aqueous solution with an extremely high adsorption capacity. The Langmuir maximum adsorption capacity of Cu2MoS4 and FeMoS4 to CTC can reach 1203.81 and 2169.19 mg/g, respectively, which goes far beyond the common adsorbents as reported. Moreover, the adsorption kinetics, thermodynamics as well as adsorption mechanism were examined in detail by a batch of adsorption experiments.

The characterization of a novel magnetic biochar derived from sulfate-reducing sludge and its application for aqueous Cr(Ⅵ) removal through synergistic effects of adsorption and chemical reduction

Removal of heavy metals from the aqueous environment via physiochemical adsorption always remains a great challenge owing to the slow kinetics and low removal capacity for the conventional adsorbent. In this study, the sulfate-reducing bacteria (SRB)-rich anaerobic sludge was pyrolyzed for the preparation of magnetic biochar, i.e. SBC-20-500 (SBC: sulfate-reducing sludge-based biochar; 20 denotes the biochar dosage, namely 8 g dried sludge in 400 mL iron solution which is equal to 20 g/L; 500 represents the pyrolysis temperature, i.e. at 500 °C) with tunable pore structure and surface properties towards efficient removal of chromium (Cr (Ⅵ)). The characterization revealed that magnetic biochar SBC-20-500 exhibited higher surface area and larger pore volume compared to non-magnetic SBC-500. Batch experiments on Cr (Ⅵ) removal were performed under different biochar dosages, pH values, initial Cr (Ⅵ) concentrations and temperatures. The results illustrated that magnetic biochar demonstrated much larger Cr (Ⅵ) adsorption capacity with q_e of 5.3585 mg/g as compared to non-modified one (q_e = 0.7206 mg/g). The maximum Cr (Ⅵ) removal efficiency of SBC-20-500 reached approximately 93.7% within 24 h under the conditions of pH = 3.0, biochar dosage = 0.8 g and initial Cr (Ⅵ) concentration = 50 mg/L. The kinetic and isotherm fitting results suggested that the pseudo-second-order kinetic and Langmuir isotherm model were more suitable for describing the adsorption behavior of Cr (Ⅵ) by SBC-20-500. The XPS and FTIR results confirmed that chemical reduction of Cr (Ⅵ) to Cr (Ⅲ) also played a role in Cr (Ⅵ) removal in the presence of SBC-20-500. Moreover, the Cr (Ⅵ) removal capacity could still achieve 3.50 mg/g even after five adsorption-desorption cycles, indicating the satisfactory reusability of the as-prepared biochar. The results of this study may provide a win-win approach for simultaneous resource recovery from the wasted sulfate-reducing sludge (SRS) and highly-efficient remediation of Cr (Ⅵ)-contaminated environment.

Performance of lignin impregnated biochar on tetracycline hydrochloride adsorption: Governing factors and mechanisms

Corn stalk-based and wheat straw-based biochar were modified by lignin impregnation and applied to adsorb tetracycline hydrochloride (TCH) in wastewater. Porous properties of lignin impregnated biochar were improved and showed better adsorption performance for TCH. Lignin impregnated wheat straw biochar (WS-L) had the maximum adsorption capacity of 31.48 mg/g, which was 1.89 times compared to corresponding pristine biochar, because excellent pore structure developed via the lignin impregnation and carbonization. The adsorption behavior of TCH molecules on biochar could be interpreted well by two-step process, and it postulated to be a physical adsorption process based on pore filling, hydrogen bonding, π-π interaction, and electrostatic interactions. And cations including Na⁺, K⁺, Mg²⁺ and Al³⁺ could compete with TCH for adsorption, while Ca²⁺ could promote TCH adsorption by forming tetracycline-Ca²⁺ complexes. Maximum TCH adsorption occurred at pH of 7. The best performing lignin impregnated biochar was WS-L that demonstrated the biochar modulated by lignin had the potential to remove antibiotics from aqueous solutions.

Fabrication of novel Fe/Mn/N co-doped biochar and its enhanced adsorption for bisphenol a based on π-π electron donor-acceptor interaction

In this work, a novel Fe/Mn/N co-doped biochar (Fe&Mn-NBC800) derived from waste apple tree branches was fabricated for bisphenol A (BPA) removal. Fe&Mn-NBC800 exhibited higher adsorption capacity (84.96 mg·g-1) in 318 K for BPA than the pristine biochar, doped mono-atomic, and di-atomic biochar. Higher temperature and adsorbent dosage promoted BPA removal, while higher solution pH was detrimental to the adsorption process. The kinetic and isothermal processes of BPA removal followed the pseudo-second-order model and Langmuir, respectively. Characterizations and correlation analysis indicated that π-π interactions showed the major contribution to the BPA adsorption. Furthermore, the pore filling, electrostatic interactions, hydrogen bonding, and hydrophobic interactions also played a role. Good water environment anti-interference ability (ion species, ionic strength, actual water body) and excellent recyclability of Fe&Mn-NBC800 make it exhibit the potential for engineering projects.

Efficient adsorption of tetracycline in aquatic system by thermally-treated sediment

The disposal of dredged sediment is a considerable challenge for environmental protection and resource utilization. In this study, the dredged sediment was thermally-treated to prepare as adsorbent and utilized for tetracycline adsorption. Sediments based adsorbents under different pyrolysis temperature and atmosphere (N₂ and limited oxygen) were obtained and 600 °C and N₂ atmosphere (600AN) exhibited maximum TC adsorption capacity (15.45 mg/g). SEM, N₂ adsorption-desorption isotherm, XRD, FTIR and XPS analysis suggested larger pore volume, relatively higher surface area, effective pore size distribution and abundant surface functional groups were the main reasons. Moreover, the influence of key adsorption parameters, including adsorbent dosage, initial pH, coexisting ions, ionic strength, contact time, initial TC concentration and ambient temperature had also been investigated. Results revealed that TC adsorption by 600AN were more consistent with pseudo-second order kinetic and Freundlich isothermal models. Combined with characterization results, which reasonably inferred that the adsorption mechanisms of 600AN were mainly involved pore-filling effect, hydrogen bonding interaction and π-π EDA interaction. This work has provided a low-cost, high efficiency and promising method for the dredged sediment reduction and resource recovery.

Mechanisms and influencing factors of yttrium sorption on paddy soil: Experiments and modeling

High-technology rare earth elements (REEs) as emerging contaminants have potentially hazardous risks for human health and the environment. Investigating the sorption of REEs on soils is crucial for understanding their migration and transformation. This study evaluated the sorption mechanisms and influencing factors of the rare earth element yttrium (Y) on paddy soil via integrated batch sorption experiments and theoretical modeling analysis. Site energy distribution theory (SEDT) combined with kinetics, thermodynamics, and isotherm sorption models were applied to illustrate the sorption mechanism. In addition, the effects of phosphorus (P), solution pH, particle size of soil microaggregates, and initial Y content on the sorption processes were evaluated by self-organizing map (SOM) and Boruta algorithm. The sorption kinetic behavior of Y on paddy soil was more consistent with the pseudo-second-order model. Thermodynamic results showed that the Y sorption was a spontaneous endothermic reaction. The generalized Langmuir model well described the isotherm data of Y sorption on heterogeneous paddy soil and soil microaggregates surface. The maximum sorption capacity of Y decreased with increasing soil particle size, which may be related to the number of sorption sites for Y on paddy soil and soil microaggregates, as confirmed by SEDT. The heterogeneity of sorption site energy for Y was the highest in the original paddy soil compared with the separated soil microaggregates. The SOM technique and Boruta algorithm highlighted that the initial concentration of Y and coexisting phosphorus played essential roles in the sorption process of Y, indicating that the addition of phosphate fertilizer may be an effective way to reduce the Y bioavailability in paddy soil in practice. These results can provide a scientific basis for the sustainable management of soil REEs and a theoretical foundation for the remediation of REEs-contaminated soils.

Biochar changed the distribution of imidacloprid in a plant-soil-groundwater system

The use of biochar has increased, as its physicochemical properties reduce the adverse effects of pesticides. However, few studies have comprehensively investigated the effects of biochar on the distribution of pesticides in a plant-soil-groundwater system. In this study, a biochar produced from rice straw at 550 °C was chosen, and column experiments with five rated of biochar application (application rates = 0.0, 1.0, 2.0, 3.0, and 4.0% w/w for B0-B4, respectively) were conducted to investigate the capacity of biochar to immobilize imidacloprid (IMI) in soil, thereby decreasing its uptake by plants and leaching from soil into groundwater. Our results showed that IMI in plants, leached from soil, and detected in soil accounted for 3.78, 1.76, and 36.4% of the total IMI input, respectively, and the biochar treatments dramatically decreased the IMI distribution to 0.57, 0.11, and 13.4%, respectively. By contrast, the percentage of undetected IMI increased from 58.1% in the B0 treatment to an average of 86.0% in the biochar treatments. Biochar treatments increased IMI immobilization in soil, which could be related to the increased soil carbon content, surface area, cation exchange capacity. This study indicates that biochar with characters of high surface area and porosity can stabilize IMI and reduce its potential to harm plants and groundwater.

MoS2 and MoS2 Nanocomposites for Adsorption and Photodegradation of Water Pollutants: A Review

The need for fresh and conveniently treated water has become a major concern in recent years. Molybdenum disulfide (MoS₂) nanomaterials are attracting attention in various fields, such as energy, hydrogen production, and water decontamination. This review provides an overview of the recent developments in MoS₂-based nanomaterials for water treatment via adsorption and photodegradation. Primary attention is given to the structure, properties, and major methods for the synthesis and modification of MoS₂, aiming for efficient water-contaminant removal. The combination of MoS₂ with other components results in nanocomposites that can be separated easily or that present enhanced adsorptive and photocatalytic properties. The performance of these materials in the adsorption of heavy metal ions and organic contaminants, such as dyes and drugs, is reviewed. The review also summarizes current progress in the photocatalytic degradation of various water pollutants, using MoS₂-based nanomaterials under UV-VIS light irradiation. MoS₂-based materials showed good activity after several reuse cycles and in real water scenarios. Regarding the ecotoxicity of the MoS₂, the number of studies is still limited, and more work is needed to effectively evaluate the risks of using this nanomaterial in water treatment.

Efficient removal of cadmium by salts modified-biochar: Performance assessment, theoretical calculation, and quantitative mechanism analysis

Modified biochar is a feasible adsorbent to solve cadmium pollution in water. However, few studies could elucidate the mechanism of cadmium adsorption by biochar from a molecular perspective. Furthermore, traditional modification methods are costly and have the risk of secondary contamination. Hence, several environmentally friendly sodium salts were used to modify the water chestnut shell-based biochar and employ it in the Cd²⁺ adsorption in this work. The modification of sodium salt could effectively improve the specific surface area and aromaticity of biochar. Na₃PO₄ modified biochar exhibited the highest Cd²⁺ adsorption capacity (112.78 mg/g). The adsorption of Cd²⁺ onto biochar was an endothermic, monolayer, chemisorption process accompanied by intraparticle diffusion. Microscopically, the enhancement of aromatization after modification made Cd²⁺ more likely to interact with the regions rich in π electrons and lone pair electrons. This study provided a new research perspective and application guidance for heavy metal adsorption on biochar.

Enhanced removal of Cd2+ from water by AHP-pretreated biochar: Adsorption performance and mechanism

The sesame straw-derived biochar was successfully prepared via alkaline hydrogen peroxide (AHP) pretreatment in this study. Systematic experimental characterizations, 15 relevant batch and column adsorption models, combined with density functional theory (DFT) calculation were used to investigate the performances and micro-mechanisms of Cd²⁺ adsorption onto biochar. We found AHP-pretreatment could greatly improve the adsorption performance of biochar for Cd²⁺. The maximum Cd²⁺ adsorption capacity of AHP-pretreated biochar (87.13 mg g^-1) was much larger than that of unpretreated biochar. Cd²⁺ adsorption was mainly dominated by the chemisorption of the homogeneous surface monolayer. The hydroxyl and carboxyl groups on the surface of biochar provided preferential adsorption sites, and liquid film diffusion and intra-particle diffusion were two dominant rate-controlling steps. Our results showed that ion exchange, co-precipitation, surface complexation, and Cd²⁺-π interaction were the dominant adsorption mechanisms. Especially, DFT calculations well-identified that lone-pair electrons during complexation and π electrons during coordination were provided by oxygen-containing functional groups and aromatic rings, respectively. The experimental breakthrough curves fitted better with the theoretical value of the BJP model, compared to Thomas, Yoon-Nelson, and EXY models. Overall, our study provides a promising method for Cd²⁺ removal from wastewater and resource utilization of agricultural wastes.

Simultaneous adsorption of phosphate and tetracycline by calcium modified corn stover biochar: Performance and mechanism

It is important to solve the problems of biomass treatment and combined contaminants removal in environmental remediation. In this study, a calcium (Ca) modified biochar (CaBC800) was fabricated using corn stover (CS) as a raw material to remove phosphate and tetracycline (TC). The experimental results indicate that CaBC800 can adsorb both inorganic phosphate and organic TC. The entire adsorption process corresponds to pseudo-second-order kinetics and Langmuir adsorption isotherm. The maximum adsorption capacities of phosphate and TC were 33.944 and 33.534 mg/g, respectively. The phosphate adsorption was demonstrated to mainly depend on the chemical precipitation by Ca²⁺ and ligand exchange by hydroxyl groups from CaBC800. Meanwhile, hydrogen bonding from oxygen functional groups and π-π interactions from aromatic rings are the main adsorption mechanisms of TC. This study provides a new adsorbent to efficiently remove phosphate and TC, and the simultaneous adsorption indicates the application potential of CaBC800 in wastewater remediation.