Biodegradation of oil-based plastics in the environment: Existing knowledge and needs of research and innovation

Enhancing polyethylene degradation: a novel bioprocess approach using Acinetobacter nosocomialis pseudo-resting cells

Despite the discovery of several bacteria capable of interacting with polymers, the activity of the natural bacterial isolates is limited. Furthermore, there is a lack of knowledge regarding the development of bioprocesses for polyethylene (PE) degradation. Here, we report a bioprocess using pseudo-resting cells for efficient degradation of PE. The bacterial strain Acinetobacter nosocomialis was isolated from PE-containing landfills and characterized using low-density PE (LDPE) surface oxidation when incubated with LDPE. We optimized culture conditions to generate catalytic pseudo-resting cells of A. nosocomialis that are capable of degrading LDPE films in a bioreactor. After 28 days of bioreactor operation using pseudo-resting cells of A. nosocomialis, we observed the formation of holes on the PE film (39 holes per 217 cm2, a maximum diameter of 1440 μm). This study highlights the potential of bacteria as biocatalysts for the development of PE degradation processes. KEY POINTS: • New bioprocess has been proposed to degrade polyethylene (PE). • Process with pseudo-resting cells results in the formation of holes in PE film. • We demonstrated PE degradation using A. nosocomialis as a biocatalyst.

Phthalate ester (PAEs) accumulation in wheat tissues and dynamic changes of rhizosphere microorganisms in the field with plastic-film residue

Phthalates acid esters (PAEs) have accumulated in soil and crops like wheat as a result of the widespread usage of plastic films. It is yet unclear, nevertheless, how these dynamic variations in PAE accumulation in wheat tissues relate to rhizosphere bacteria in the field. In this work, a field root-bag experiment was conducted to examine the changes of PAEs accumulation in the rhizosphere soil and wheat tissues under film residue conditions at four different growth stages of wheat, and to clarify the roles played by the microbial community in the alterations. Results showed that the plastic film residues significantly increased the concentrations of PAEs in soils, wheat roots, straw and grains. The maximum ΣPAEs concentration in soils and different wheat tissues appeared at the maturity, with the ΣPAEs concentration of 1.57 mg kg-1, 4.77 mg kg-1, 5.21 mg kg-1, 1.81 mg kg-1 for rhizosphere soils, wheat roots, straw and grains, respectively. The plastic film residues significantly changed the functions and components of the bacterial community, increased the stochastic processes of the bacterial community assembly, and reduced the complexity and stability of the bacterial network. In addition, the present study identified some bacteria associated with plastic film residues and PAEs degradation in key-stone taxa, and their relative abundances were positive related to the ΣPAEs concentration in soils. The PAEs content and key-stone taxa in rhizosphere soil play a crucial role in the formation of rhizosphere soil bacterial communities. This field study provides valuable information for better understanding the role of microorganisms in the complex system consisting of film residue, soil and crops.

Mimicking the enzymatic plant cell wall hydrolysis mechanism for the degradation of polyethylene terephthalate

Plastic pollution presents a global challenge, impacting ecosystems, wildlife, and economies. Polyethylene terephthalate (PET), widely used in products like bottles, significantly contributes to this issue due to poor waste collection. In recent years, there has been increasing interest in plant biomass-degrading enzymes for plastic breakdown, due to the structural and physicochemical similarities between natural and synthetic polymers. Filamentous fungi involved in hemicellulose degradation have developed a complex mode of action that includes not only enzymes but also biosurfactants; surface-active molecules that facilitate enzyme-substrate interactions. For this reason, this study aimed to mimic the mechanism of biomass degradation by repurposing plant cell wall degrading enzymes including a cutinase and three esterases to cooperatively contribute to PET degradation. Surfactants of different charge were also introduced in the reactions, as their role is similar to biosurfactants, altering the surface tension of the polymers and thus improving enzymes' accessibility. Notably, Fusarium oxysporum cutinase combined with anionic surfactant exhibited a 2.3- and 1.6-fold higher efficacy in hydrolyzing amorphous and semi-crystalline PET, respectively. When cutinase was combined with either of two ferulic acid esterases, it resulted in complete conversion of PET intermediate products to TPA, increasing the overall product release up to 1.9- fold in presence of surfactant. The combination of cutinase with a glucuronoyl esterase demonstrated significant potential in plastic depolymerization, increasing degradation yields in semi-crystalline PET by up to 1.4-fold. The approach of incorporating enzyme cocktails and surfactants emerge as an efficient solution for PET degradation in mild reaction conditions, with potential applications in eco-friendly plastic waste management.

Continuous generation and release of microplastics and nanoplastics from polystyrene by plastic-degrading marine bacteria

Plastic waste released into the environments breaks down into microplastics due to weathering, ultraviolet (UV) radiation, mechanical abrasion, and animal grazing. However, little is known about the plastic fragmentation mediated by microbial degradation. Marine plastic-degrading bacteria may have a double-edged effect in removing plastics. In this study, two ubiquitous marine bacteria, Alcanivorax xenomutans and Halomonas titanicae, were confirmed to degrade polystyrene (PS) and lead to microplastic and nanoplastic generation. Biodegradation occurred during bacterial growth with PS as the sole energy source, and the formation of carboxyl and carboxylic acid groups, decreased heat resistance, generation of PS metabolic intermediates in cultures, and plastic weight loss were observed. The generation of microplastics was dynamic alongside PS biodegradation. The size of the released microplastics gradually changed from microsized plastics on the first day (1344 nm and 1480 nm, respectively) to nanoplastics on the 30th day (614 nm and 496 nm, respectively) by the two tested strains. The peak release from PS films reached 6.29 × 106 particles/L and 7.64 × 106 particles/L from degradation by A. xenomutans (Day 10) and H. titanicae (Day 5), respectively. Quantification revealed that 1.3% and 1.9% of PS was retained in the form of micro- and nanoplastics, while 4.5% and 1.9% were mineralized by A. xenomutans and H. titanicae at the end of incubation, respectively. This highlights the negative effects of microbial degradation, which results in the continuous release of numerous microplastics, especially nanoplastics, as a notable secondary pollution into marine ecosystems. Their fates in the vast aquatic system and their impact on marine lives are noted for further study.

An investigation of the environmental implications of bioplastics: Recent advancements on the development of environmentally friendly bioplastics solutions

The production and utilization of plastics may prove beneficial, but the environmental impact suggests the opposite. The single-use plastics (SUP) and conventional plastics are harmful to the environment and need prompt disposal. Bioplastics are increasingly being considered as a viable alternative to conventional plastics due to their potential to alleviate environmental concerns such as greenhouse gas emissions and pollution. However, the previous reviews revealed a lack of consistency in the methodologies used in the Life Cycle Assessments (LCAs), making it difficult to compare the results across studies. The current study provides a systematic review of LCAs that assess the environmental impact of bioplastics. The different mechanical characteristics of bio plastics, like tensile strength, Young's modulus, flexural modulus, and elongation at break are reviewed which suggest that bio plastics are comparatively much better than synthetic plastics. Bioplastics have more efficient mechanical properties compared to synthetic plastics which signifies that bioplastics are more sustainable and reliable than synthetic plastics. The key challenges in bioplastic adoption and production include competition with food production for feedstock, high production costs, uncertainty in end-of-life management, limited biodegradability, lack of standardization, and technical performance limitations. Addressing these challenges requires collaboration among stakeholders to drive innovation, reduce costs, improve end-of-life management, and promote awareness and education. Overall, the study suggests that while bioplastics have the potential to reduce environmental impact, further research is needed to better understand their life cycle and optimize their end-of-life (EoL) management and production to maximize their environmental benefits.

Temporal dynamics of bacterial colonization on five types of microplastics in a freshwater lake

Microplastics (MPs), as a new substrate, provide a unique niche for microbial colonization in the freshwater ecosystems; however, the impacts of long-term MP exposure on colonized bacteria are still unclear. In this study, five MP types were exposed in a freshwater lake for approximately one year, and the MP particles, together with the surrounding water, were collected on days 60, 150, 250 and 330 during the in situ field experiment. Bacteria on the MP surface, as well as free-living bacteria in the surrounding water, were analyzed to evaluate the temporal dynamics of these bacterial communities. Results show that all five MP types exhibited signs of degradation during the exposure process. Additionally, the alpha diversity, community structure and composition of MP-attached bacteria significantly differed from that of the free-living bacteria in the surrounding water, indicating that the five MP types could provide a preferable niche for bacterial colonization in a freshwater environment. Proteobacteria, Chloroflexi, Verrucomicrobiota, Actinobacteriota and Firmicutes were the top five dominant phyla. Some plastic-degrading bacteria included in these phyla were detected, verifying that MP-attached biofilms had a certain degree of MP degradation potential. Some potentially pathogenic bacteria were also detected, suggesting an ecological threat for spreading disease in the aquatic ecosystem. Furthermore, the bacterial community and some metabolic pathways were significantly affected by the MP type (P < 0.01) and exposure time (P < 0.01), indicating that the presence of MPs not only alters the bacterial community structure and composition, but also influences their potential functional properties in freshwater ecosystems. Multiple factors, including the physicochemical properties related to MPs and the environmental parameters of the surrounding water, affect the community composition and the function of MP-attached bacteria to different degrees. Our findings indicate that the presence of MPs has a potential ecological impact on freshwater ecosystems.

Degradation and potential metabolism pathway of polystyrene by bacteria from landfill site

Microplastics pollution has garnered significant attention in recent years. The unique cross-linked structure of polystyrene microplastics makes them difficult to biodegrade. In this study, we investigated the microbial community in landfill soil that has the ability to degrade polystyrene, as well as two isolated strains, named Lysinibacillus sp. PS-L and Pseudomonas sp. PS-P. The maximum weight loss of polystyrene film and microplastic in 30 days is 2.25% and 6.99% respectively. The water contact angle of polystyrene film decreased by a maximum of 35.70% during biodegradation. The increase in hydrophilicity is attributed to the oxidation reaction and formation of hydroxyl groups during the degradation of polystyrene. The carbon and oxygen element contents of polystyrene decreased and increased by a maximum of 3.81% and 0.79% respectively. The peak intensity changes at wavelengths of 3285-3648 cm-1 and 1652 cm-1 in Fourier transform infrared spectroscopy confirmed the formation of hydroxyl and carbonyl groups. Furthermore, quantitative PCR revealed the gene expression levels of alkane monooxygenase and alcohol dehydrogenase were upregulated by 8.8-fold and 8.5-fold respectively in PS biodegradation. Additionally, genome annotation of Pseudomonas sp. PS-P identified nine genes associated with polystyrene metabolism. These findings highlight Pseudomonas sp. PS-P as a potential candidate strain for polystyrene degradation enzymes or genes. Thus, they lay the groundwork for understanding the potential metabolic mechanisms and pathways involved in polystyrene degradation.

Microplastics as vectors of other contaminants: Analytical determination techniques and remediation methods

The ubiquitous and persistent presence of microplastics (MPs) in aquatic and terrestrial ecosystems has raised global concerns due to their detrimental effects on human health and the natural environment. These minuscule plastic fragments not only threaten biodiversity but also serve as vectors for contaminants, absorbing organic and inorganic pollutants, thereby causing a range of health and environmental issues. This review provides an overview of microplastics and their effects. This work highlights available analytical techniques for detecting and characterizing microplastics in different environmental matrices, assessing their advantages and limitations. Additionally, this review explores innovative remediation approaches, such as microbial degradation and other advanced methods, offering promising prospects for combatting microplastic accumulation in contaminated environments. The focus on environmentally-friendly technologies, such as the use of microorganisms and enzymes for microplastic degradation, underscores the importance of sustainable solutions in plastic pollution management. In conclusion, this article not only deepens our understanding of the microplastic issue and its impact but also advocates for the urgent need to develop and implement effective strategies to mitigate this critical environmental challenge. In this context, the crucial role of advanced technologies, like quantitative Nuclear Magnetic Resonance spectroscopy (qNMR), as promising tools for rapid and efficient microplastic detection, is emphasized. Furthermore, the potential of the enzyme PETase (polyethylene terephthalate esterase) in microplastic degradation is examined, aiming to address the growing plastic pollution, particularly in saline environments like oceanic ecosystems. These innovations offer hope for effectively addressing microplastic accumulation in contaminated environments and minimizing its adverse impacts.

Interactions between microplastics and insects in terrestrial ecosystems-A systematic review and meta-analysis

The presence of microplastics (MPs) in terrestrial ecosystems has been confirmed worldwide. Due to their widespread distribution and diversity in habitats, insects will readily interact with MPs via various pathways. Although the topic of MP-insect interactions is still in the early stages of research, it is becoming increasingly important. We used a META approach with phylogenetic control and subgroup examination to summarize the evidence from both field and laboratory experiments in quantitative form. The field evidence suggests that insects can take and transfer MPs along food chains via ingestion and adherence. Also, they are active in the bio-fragmentation of MPs and the generation of secondary pollutants. The exposure to MPs impaired key biological traits of insects, mainly their behavior and health, such as reducing climbing ability and increasing oxidative stress. In terms of exposure conditions, the small-sized MPs can induce more severe effects on the insects, while the insect response to MPs was not significantly reliant on exposure times or MP concentrations based on the current evidence available. We propose that insects not only play roles in the redistribution of MPs spatially and in food chains via bio-fragmentation but are also threatened by MPs. Our research deepens our understanding of the environmental risks posed by MPs in insect ecosystems.

Environmental impacts of 5-year plastic waste deposition on municipal waste landfills: A follow-up study

Depositing plastic waste has long been a prevalent method of utilization, persisting today. Plastic waste within municipal waste landfills (MWL) undergoes diverse (bio-)degradation processes, which may be a potential source of chemicals and microorganisms harmful to the environment and human health. Soil and air samples were collected from modern MWL to identify environmental contamination caused by 5 years of plastic (bio-)degradation. The pH of soil samples was higher than in the reference area (RA), which was possibly caused by alterations in soil anionic composition detected with ion chromatography. The presence of plastic additives with a toxic potential was detected in soil samples by gas chromatography coupled with tandem mass spectrometry (GC-MS/MS). With the use of thermal desorption and GC - MS, hazardous substances (phthalic anhydride, phenylmaleic anhydride, ethylbenzene, xylene) with a known impact on the human endocrine system were also detected. The number of microorganisms, both fungi, and bacteria, was highly increased in soil and air in the MWL as compared to the RA. The soil collected in the MWL area appeared to be phytotoxic, and inhibited seed germination (Phytotoxkit FTM bioassay), while acute toxicity Microtox® bioassay showed a hormetic effect towards Aliivibrio fischeri. Obtained results exhibited massive soil and air contamination, with both chemical substances and microorganisms while plastic waste undergoes (bio-)degradation. It may contribute to serious environmental contamination and pose a threat to human health.

Biodegradation of polyethylene terephthalate (PET) by diverse marine bacteria in deep-sea sediments

PET plastic waste entering the oceans is supposed to take hundreds of years to degrade and tends to accumulate in the deep sea. However, we know little about the bacteria capable of plastic degradation therein. To determine whether PET-degrading bacteria are present in deep-sea sediment, we collected the samples from the eastern central Pacific Ocean and initiated microbial incubation with PET as the carbon source. After enrichment with PET for 2 years, we gained all 15 deep-sea sediment communities at five oceanic sampling sites. Bacterial isolation for pure culture and further growth tests confirmed that diverse bacteria possess degradation ability including Alcanivorax xenomutans BC02_1_A5, Marinobacter sediminum BC31_3_A1, Marinobacter gudaonensis BC06_2_A6, Thalassospira xiamenensis BC02_2_A1 and Nocardioides marinus BC14_2_R3. Furthermore, four strains were chosen as representatives to reconfirm the PET degradation capability by SEM, weight loss and UPLC-MS. The results showed that after 30-day incubation, 1.3%-1.8% of PET was lost. De-polymerization of PET by the four strains was confirmed by the occurrence of the PET monomer of MHET and TPA as the key degradation products. Bacterial consortia possessing PET-degrading potential are prevalent and diverse and might play a key role in the removal of PET pollutants in deep oceans.

Microplastics in stomach contents of juvenile Patagonian blennies (Eleginops maclovinus)

Microplastics are one of the major environmental issues that need to be addressed because they are starting to impact food chains and are also affecting human populations. The size, colour, form, and abundance of microplastics in young blennies of the species Eleginops maclovinus were examined in the current study. While the stomach contents of 70 % of the studied individuals contained microplastics, 95 % of them included fibres. Individual size and the largest particle size that can be eaten, which ranges between 0.09 and 1.5 mm present no statistical correlation. The quantity of particles taken in by each individual does not change with size. The most present microfibers colours were blue and red. Sampled fibres were analysed with FT-IR and no natural fibres were detected, proving the synthetic origin of the detected particles. These findings suggest that protected coastlines create conditions that favour the encounter of microplastics increasing local wildlife exposure to microplastics, raising the danger of their ingestion with potential physiological, ecological, economical and human health consequences.

Impact of per- and polyfluorinated alkyl substances (PFAS) on the marine environment: Raising awareness, challenges, legislation, and mitigation approaches under the One Health concept

Per- and polyfluorinated alkyl substances (PFAS) have long been known for their detrimental effects on the ecosystems and living organisms; however the long-term impact on the marine environment is still insufficiently recognized. Based on PFAS persistence and bioaccumulation in the complex marine food network, adverse effects will be exacerbated by global processes such as climate change and synergies with other pollutants, like microplastics. The range of fluorochemicals currently included in the PFAS umbrella has significantly expanded due to the updated OECD definition, raising new concerns about their poorly understood dynamics and negative effects on the ocean wildlife and human health. Mitigation challenges and approaches, including biodegradation and currently studied materials for PFAS environmental removal are proposed here, highlighting the importance of ongoing monitoring and bridging research gaps. The PFAS EU regulations, good practices and legal frameworks are discussed, with emphasis on recommendations for improving marine ecosystem management.

Inhalation of polycarbonate emissions generated during 3D printing processes affects neuroendocrine function in male rats

Three-dimensional (3D) printing of manufactured goods has increased in the last 10 years. The increased use of this technology has resulted in questions regarding the influence of inhaling emissions generated during printing. The goal of this study was to determine if inhalation of particulate and/or toxic chemicals generated during printing with polycarbonate (PC) plastic affected the neuroendocrine system. Male rats were exposed to 3D-printer emissions (592 µg particulate/m3 air) or filtered air for 4 h/day (d), 4 days/week and total exposures lengths were 1, 4, 8, 15 or 30 days. The effects of these exposures on hormone concentrations, and markers of function and/or injury in the olfactory bulb, hypothalamus and testes were measured after 1, 8 and 30 days exposure. Thirty days of exposure to 3D printer emissions resulted in reductions in thyroid stimulating hormone, follicle stimulating hormone and prolactin. These changes were accompanied by (1) elevation in markers of cell injury; (2) reductions in active mitochondria in the olfactory bulb, diminished gonadotropin releasing hormone cells and fibers as well as less tyrosine hydroxylase immunolabeled fibers in the arcuate nucleus; and (3) decrease in spermatogonium. Polycarbonate plastics may contain bisphenol A, and the effects of exposure to these 3D printer-generated emissions on neuroendocrine function are similar to those noted following exposure to bisphenol A.

Characteristics analysis of plastisphere biofilm and effect of aging products on nitrogen metabolizing flora in microcosm wetlands experiment

The marsh, a significant terrestrial ecosystem, has steadily developed the capacity to act as a microplastics collection place (MPs). Here, 180 days of exposure to three different polymer kinds of plastics: polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC), were conducted in miniature wetlands (CWs). Water contact angle (WCA), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and High-throughput sequencing were used to study the succession of microbial community structure and function on MPs after 0, 90, and 180 days of exposure. The results showed that different polymers were degrading and aging differing degrees; PVC contained new functional groups with the symbols -CC-, -CO-, and -OH, while PE had the biggest range of contact angles (74.0-45.5°). Bacteria colonization was discovered on plastic surfaces, and as time went on, it became increasingly evident that the surfaces' composition had altered, and their hydrophobicity had diminished. The plastisphere's microbial community structure as well as water nitrification and denitrification were altered by MPs. In general, our study created a vertical flow-built wetland environment, monitored the impacts of plastic aging and breakdown products on nitrogen metabolizing microorganisms in wetland water, and offered a reliable site for the screening of plastic-degrading bacteria.

Valorization of Honduran Agro-Food Waste to Produce Bioplastics

The development of biodegradable plastics and eco-friendly biomaterials derived from renewable resources is crucial for reducing environmental damage. Agro-industrial waste and rejected food can be polymerized into bioplastics, offering a sustainable solution. Bioplastics find use in various industries, including for food, cosmetics, and the biomedical sector. This research investigated the fabrication and characterization of bioplastics using three types of Honduran agro-wastes: taro, yucca, and banana. The agro-wastes were stabilized and characterized (physicochemically and thermically). Taro flour presented the highest protein content (around 4.7%) and banana flour showed the highest moisture content (around 2%). Furthermore, bioplastics were produced and characterized (mechanically and functionally). Banana bioplastics had the best mechanical properties, with a Young's modulus around 300 MPa, while taro bioplastics had the highest water-uptake capacity (200%). In general, the results showed the potential of these Honduran agro-wastes for producing bioplastics with different characteristics that could add value to these wastes, promoting the circular economy.

Salinity significantly reduces plastic-degrading bacteria from rivers to oceans

Microplastics (MPs) are found in rivers and offshore areas. However, there is a lack of detailed research on the changes of surface microbial species attached to MPs when MPs enter the sea. Moreover, no study has been conducted on changes to plastic-degrading bacteria during this process. In this study, using rivers and offshore in Macau, China as examples, bacterial diversity and bacterial species composition attached to surface water and MPs at four river sampling stations and four offshore sampling stations around Macau were studied. Plastic-degrading bacteria, plastic-related metabolic processes, and plastic-related enzymes were analyzed. The results showed that MPs-attached bacteria in rivers and offshore were different with the planktonic bacteria (PB). The proportion of major families on the surface of MPs continued to increase from rivers to estuaries. MPs could significantly enrich plastic-degrading bacteria both in rivers and offshore. The proportion of plastic-related metabolic pathways on the surface bacteria of MPs in rivers was higher than that in offshore waters. Bacteria on the surface of MPs in rivers may induce higher plastic degradation than offshore. Salinity significantly alters the distribution of plastic-degrading bacteria. MPs may degrade more slowly in the oceans, posing a long-term threat to marine life and human health.

Biodegradation of low density polyethylene (LDPE) by mesophilic fungus 'Penicillium citrinum' isolated from soils of plastic waste dump yard, Bhopal, India

Low density Polyethylene (LDPE) in various forms has become a part of life. Its accretion due to non degradable nature is concern, endangering life on earth. Amongst various methods of LDPE disposal bioremediation is regarded as ecofriendly & widely accepted. Current investigation was an attempt to isolate potent PE degrading fungus from municipal landfill soils of Bhopal, India loaded with plastic waste.16 fungal isolates were recorded from the site; PE deteriorating fungus was screened using mineral salt agar medium amended with 3% LDPE powder as sole carbon source. The isolate Penicillium citrinum showed fast fungal colony growth in screening medium was selected for biodegradation study. P.citrinum showed 38.82 ± 1.08% weight loss of untreated LDPE pieces; to improve the degradation capacity nitric acid pretreatment was performed; biodegradation was significantly stimulated by 47.22 ± 2.04% after it's pretreatment. Laccase, lipase, esterase & manganese peroxidase activities were assayed by spectrophotometer. LDPE biodegradation was analyzed by weight loss %, change in pH during fungal growth, field emission scanning electron microscopy (FE-SEM), fourier transform infrared spectroscopy (FTIR) & thermogravimetric analysis (TGA). FTIR spectra showed appearance of new functional groups assigned to hydrocarbon biodegradation, confirming enzymatic role in process. Changes in FTIR spectra of LDPE samples (untreated & pretreated) before & after biodegradation & surface changes in the biodegraded LDPE (indicated from FE-SEM) confirmed depolymerization of LDPE. Further changes in thermal decomposition rates of biodegraded samples in comparison to control, validate biodegradation. This is the first report signifying high competence of P.citrinum in LDPE degradation without prior pretreatment.

Insights into the degradation of high-density polyethylene microplastics using microbial strains: Effect of process parameters, degradation kinetics and modeling

The extensive distribution of microplastics and their abundance around the world has raised a global concern because of the lack of proper disposal channels as well as poor knowledge of their implications on human health. Sustainable remediation techniques are required owing to the absence of proper disposal methods. The present study explores the deterioration process of high-density polyethylene (HDPE) microplastics using various microbes along with the kinetics and modeling of the process using multiple non-linear regression models. Ten different microbial strains were used for the degradation of microplastics for a period of 30 days. Effect of process parameters on the degradation process was studied with the selected five microbial strains that presented the best degradation results. The reproducibility and efficacy of the process were tested for an extended period of 90 days. Fourier-transform infrared spectroscopy (FTIR) and field emission-scanning electron microscopy (FE-SEM) were used for the analysis of microplastics. Polymer reduction and half-life were evaluated. Pseudomonas putida achieved the maximum degradation efficiency of 12.07% followed by Rhodococcus ruber (11.36%), Pseudomonas stutzeri (8.28%), Bacillus cereus (8.26%), and Brevibacillus borstelensis (8.02%) after 90 days. Out of 14 models tested, 5 were found capable of modeling the process kinetics and based on simplicity and statistical data, Modified Michaelis-Menten model (F8; R² = 0.97) was selected as superior to others. This study successfully establishes the potential of bioremediation of microplastics as the viable process.

Effects of microplastic type on growth and physiology of soil crops: Implications for farmland yield and food quality

Microplastic residues pose one of the most serious environmental problems in areas where plastic mulch is used extensively. Microplastic pollution has potentially serious consequences for ecosystems and human health. Several studies have analyzed microplastics in greenhouses or laboratory climate-controlled chambers; however, field studies evaluating the effects of different microplastics on different crops in extensive farming are limited. Therefore, we selected three major crops, Zea mays (ZM, monocotyledon), Glycine max (GM, dicotyledon, aboveground-bearing), and Arachis hypogaea (AH, dicotyledon, belowground-bearing) and investigated the effect of adding polyester microplastics (PES-MPs) and polypropylene microplastics (PP-MPs). Our results demonstrate that PP-MPs and PES-MPs decreased the soil bulk density of ZM, GM, and AH. Regarding soil pH, PES-MPs increased the soil pH of AH and ZM, whereas PP-MPs decreased the soil pH of ZM, GM, and AH compared to controls. Intriguingly, different coordinated trait responses to PP-MPs and PES-MPs were observed in all crops. In general, commonly measured parameters of AH, such as plant height, culm diameter, total biomass, root biomass, PSII maximum photochemical quantum yield (Fv/Fm), hundred-gain weight, and soluble sugar tended to decrease under PP-MPs exposure; however, some indicators of ZM and GM increased under PP-MPs exposure. PES-MPs had no obviously adverse influence on the three crops, except for the biomass of GM, and even significantly increased the chlorophyll content of AH, specific leaf area, and soluble sugar of GM. Compared with PES-MPs, PP-MPs have serious negative effects on crop growth and quality, especially AH. The findings of the present study provides evidence for evaluating the impact of soil microplastic pollution on crop yield and quality in farmland and lay a foundation for future investigations on the exploration of MP toxicity mechanisms and adaptability of different crops to microplastics.

Computational Exploration of Bio-Degradation Patterns of Various Plastic Types

Plastic materials are recalcitrant in the open environment, surviving for longer without complete remediation. The current disposal methods of used plastic material are inefficient; consequently, plastic wastes are infiltrating the natural resources of the biosphere. The mixed composition of urban domestic waste with different plastic types makes them unfavorable for recycling; however, natural assimilation in situ is still an option to explore. In this research work, we have utilized previously published reports on the biodegradation of various plastics types and analyzed the pattern of microbial degradation. Our results demonstrate that the biodegradation of plastic material follows the chemical classification of plastic types based on their main molecular backbone. The clustering analysis of various plastic types based on their biodegradation reports has grouped them into two broad categories of C-C (non-hydrolyzable) and C-X (hydrolyzable). The C-C and C-X groups show a statistically significant difference in their biodegradation pattern at the genus level. The Bacilli class of bacteria is found to be reported more often in the C-C category, which is challenging to degrade compared to C-X. Genus enrichment analysis suggests that Pseudomonas and Bacillus from bacteria and Aspergillus and Penicillium from fungi are potential genera for the bioremediation of mixed plastic waste. The lack of uniformity in reporting the results of microbial degradation of plastic also needs to be addressed to enable productive growth in the field. Overall, the result points towards the feasibility of a microbial-based biodegradation solution for mixed plastic waste.

Degradation of polyvinyl chloride by a bacterial consortium enriched from the gut of Tenebrio molitor larvae

Polyvinyl chloride (PVC), a carbon backbone synthetic plastic containing chlorine element, is one of six widely used plastics accounting for 10% global plastics production. PVC wastes are recalcitrant to be broken down in the environment but release harmful chlorinated compounds, causing damage to the ecosystem. Although biodegradation represents a sustainable approach for PVC reduction, virtually no efficient bacterial degraders for additive-free PVC have been reported. In addition, PVC depolymerization by Tenebrio molitor larvae was suggested to be gut microbe-dependent, but to date no additive-free PVC degraders have been isolated from insect guts. In this study, a bacterial consortium designated EF1 was newly enriched from the gut of Tenebrio molitor larvae, which was capable of utilizing additive-free PVC for its growth with the PVC-mass reduction and dechlorination of PVC. PVC films inoculated with consortium EF1 for 30 d were analyzed by diverse polymer characterization methods including atomic force microscopy, scanning electron microscope, water contact angle, time-of-flight secondary ion mass spectrometry, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis technique, and ion chromatography. It was found that bio-treated PVC films were covered with tight biofilms with increased -OH and -CC- groups and decreased chlorine contents, and erosions and cracks were present on their surfaces. Meanwhile, the hydrophilicity of bio-treated films increased, but their thermal stability declined. Furthermore, M_w, M_n and M_z values were reduced by 17.0%, 28.5% and 16.1% using gel permeation chromatography, respectively. In addition, three medium-chain aliphatic primary alcohols and their corresponding fatty acids were identified as PVC degradation intermediates by gas chromatography-mass spectrometry. Combing all above results, it is clear that consortium EF1 is capable of efficiently degrading PVC polymer, providing a unique example for PVC degradation by gut microbiota of insects and a feasibility for the removal of PVC wastes.

Gut Microbiome Associating with Carbon and Nitrogen Metabolism during Biodegradation of Polyethene in Tenebrio larvae with Crop Residues as Co-Diets

Tenebrio molitor and Tenebrio obscurus (Coleoptera: Tenebrionidae) larvae are two commercial insects that eat plant and crop residues as diets and also biodegrade synthetic plastics polyethylene (PE). We examined biodegradation of low-density PE (LDPE) foam (M_n = 28.9 kDa and M_w = 342.0 kDa) with and without respective co-diets, i.e., wheat brain (WB) or corn flour (CF), corn straw (CS), and rice straw (RS) at 4:1 (w/w), and their gut microbiome and genetic metabolic functional groups at 27.0 ± 0.5 °C after 28 days of incubation. The presence of co-diets enhanced LDPE consumption in both larvae and broad-depolymerized the ingested LDPE. The diet type shaped gut microbial diversity, potential pathways, and metabolic functions. The sequence of effectiveness of co-diets was WB or CF > CS > RS for larval development and LDPE degradation. Co-occurrence networks indicated that the larvae co-fed with LDPE displayed more complex correlations of gut microbiome than the larvae fed with single diets. The primary diet of WB or CF and crop residues CS and RS provided energy and nitrogen source to significantly enhance LDPE biodegradation with synergistic activities of the gut microbiota. For the larvae fed LDPE and LDPE plus co-diets, nitrogen fixation function was stimulated compared to normal diets and associated with LDPE biodegradation.

Biotechnological methods to remove microplastics: a review

Microplastics pollution is major threat to ecosystems and is impacting abiotic and biotic components. Microplastics are diverse and highly complex contaminants that transport other contaminants and microbes. Current methods to remove microplastics include biodegradation, incineration, landfilling, and recycling. Here we review microplastics with focus on sources, toxicity, and biodegradation. We discuss the role of algae, fungi, bacteria in the biodegradation, and we present biotechnological methods to enhance degradation, e.g., gene editing tools and bioinformatics.

Removing microplastics from aquatic environments: A critical review

As one of the typical emerging contaminants, microplastics exist widely in the environment because of their small size and recalcitrance, which has caused various ecological problems. This paper summarizes current adsorption and removal technologies of microplastics in typical aquatic environments, including natural freshwater, marine, drinking water treatment plants (DWTPs), and wastewater treatment plants (WWTPs), and includes abiotic and biotic degradation technologies as one of the removal technologies. Recently, numerous studies have shown that enrichment technologies have been widely used to remove microplastics in natural freshwater environments, DWTPs, and WWTPs. Efficient removal of microplastics via WWTPs is critical to reduce the release to the natural environment as a key connection point to prevent the transfer of microplastics from society to natural water systems. Photocatalytic technology has outstanding pre-degradation effects on microplastics, and the isolated microbial strains or enriched communities can degrade up to 50% or more of pre-processed microplastics. Thus, more research focusing on microplastic degradation could be carried out by combining physical and chemical pretreatment with subsequent microbial biodegradation. In addition, the current recovery technologies of microplastics are introduced in this review. This is incredibly challenging because of the small size and dispersibility of microplastics, and the related technologies still need further development. This paper will provide theoretical support and advice for preventing and controlling the ecological risks mediated by microplastics in the aquatic environment and share recommendations for future research on the removal and recovery of microplastics in various aquatic environments, including natural aquatic environments, DWTPs, and WWTPs.

Marine-Derived Actinomycetes: Biodegradation of Plastics and Formation of PHA Bioplastics-A Circular Bioeconomy Approach

Plastics are present in the majority of daily-use products worldwide. Due to society's production and consumption patterns, plastics are accumulating in the environment, causing global pollution issues and intergenerational impacts. Our work aims to contribute to the development of solutions and sustainable methods to mitigate this pressing problem, focusing on the ability of marine-derived actinomycetes to accelerate plastics biodegradation and produce polyhydroxyalkanoates (PHAs), which are biodegradable bioplastics. The thin plastic films' biodegradation was monitored by weight loss, changes in the surface chemical structure (Infra-Red spectroscopy FTIR-ATR), and by mechanical properties (tensile strength tests). Thirty-six marine-derived actinomycete strains were screened for their plastic biodegradability potential. Among these, Streptomyces gougerotti, Micromonospora matsumotoense, and Nocardiopsis prasina revealed ability to degrade plastic films-low-density polyethylene (LDPE), polystyrene (PS) and polylactic acid (PLA) in varying conditions, namely upon the addition of yeast extract to the culture media and the use of UV pre-treated thin plastic films. Enhanced biodegradation by these bacteria was observed in both cases. S. gougerotti degraded 0.56% of LDPE films treated with UV radiation and 0.67% of PS films when inoculated with yeast extract. Additionally, N. prasina degraded 1.27% of PLA films when these were treated with UV radiation, and yeast extract was added to the culture medium. The main and most frequent differences observed in FTIR-ATR spectra during biodegradation occurred at 1740 cm^-1, indicating the formation of carbonyl groups and an increase in the intensity of the bands, which indicates oxidation. Young Modulus decreased by 30% on average. In addition, S. gougerotti and M. matsumotoense, besides biodegrading conventional plastics (LDPE and PS), were also able to use these as a carbon source to produce degradable PHA bioplastics in a circular economy concept.

Response of soybean (Glycine max L.) seedlings to polystyrene nanoplastics: Physiological, biochemical, and molecular perspectives

Micro and nanoplastics are new generation contaminants of global concern. It is important to evaluate the effects on edible products due to the presence of micro- and nano-sized plastics in the treated wastewater. A hydroponic experiment was carried out to explore the effect of polsytrene nanoplastics (PS-NPs; 20 nm) at different concentrations (0, 12.5, 25, and 50 mg L^-1) on Glycine max L. (soybean) seedlings for 7-days. In the current study, firstly the uptake of PS-NPs by Glycine max L. (soybean) roots were confirmed by laser confocal scanning microscope. Exposure to PS-NPs, negatively affected growth parameters and increased Fe, Zn and Mn contents in roots and leaves of soybean seedlings. PS-NPs treatments caused oxidative stress in soybean seedlings. The hydrogen peroxide and malondialdehyde contents, showed similar increase pattern in seedlings exposed to PS-NPs. Response to PS-NPs, the level of antioxidant enzymes (superoxide dismutase, catalase, ascorbate peroxidase, and guaiacol peroxidase) and proline content were generally enhanced in roots and leaves of soybean. The expression level of stress-related genes examined in the study included CSD5, FSD3, APX1, and POD up-regulated in PS-NPs treated-soybean seedlings in a tissue specific manner. The results of the present study showed the adverse effects of PS-NPs on soybean seedlings, which may have important implications for the risk assessment of NPs on crop production and environmental safety.

Past, present, and future perspectives of biodegradable films for soil: A 30-year systematic review

Based on the Web of Science Core Collection (WOSCC) database, the academic works published in the past 30 years on biodegradable films for soil were analyzed. In order to ensure the rigor of this experiment, this paper is based on the mathematical double matrix model VOS Viewer software and CiteSpace software. This work shows that publications of biodegradable films for soil are increasing year by year; polymer science is the hottest subject in the field of biodegradable films for soil; China and the United States are the countries with the most significant number of publications in this field, has an important position; Washington State University is the most published institution. This study further identifies and reveals the essential characteristics, research strength, knowledge structure, main research fields, and research hotspots in the late stage of the field of biodegradable films for soil and introduces the Activity Index (AI) and the Attractive Index (AAI), thereby assessing trends and performance in different countries. The paper also further illustrates the importance of biodegradable films by presenting field trials using biodegradable films on different plants. The research in the field of biodegradable films for soil is divided into four categories: “The research field of degradation,” “The effect of biodegradable film on soil,” “Performance and mechanism of the biodegradable film,” and “Effects of biodegradable film on crop growth and development.”. The study can be seen as a microcosm of the development of biodegradable films for soils, which will help researchers quickly identify their general patterns. Readers can better understand the changes and development trends in this field in the past 30 years and provide references for future research.

Myco-degradation of microplastics: an account of identified pathways and analytical methods for their determination

Microplastics (MPs) have sparked widespread concern due to their non-degradable and persistent nature in ecosystems. Long-term exposure to microplastics can cause chronic toxicity, including impaired reproduction and malnutrition, threatening biota and humans. Microplastics can also cause ingestion, choking, and entanglement in aquatic populations. Thus, it is crucial to establish remarkably effective approaches to diminish MPs from the environment. In this regard, using fungi for microplastic degradation is beneficial owing to its diverse nature and effective enzymatic system. Extracellular and intracellular enzymes in fungi degrade the plastic polymers into monomers and produce carbon dioxide and water under aerobic conditions whereas methane under anaerobic conditions. Further, fungi also secrete hydrophobins (surface proteins) which serve as a crucial aid in the bioremediation process by promoting substrate mobility and bioavailability. Therefore, the present review provides insight into the mechanism and general pathway of fungal-mediated microplastic degradation. Additionally, analytical techniques for the monitoring of MPs degradation along with the roadblocks and future perspectives have also been discussed. However, more research is required to fully perceive the underlying process of microplastic biodegradation in the environment using fungus, to establish an effective and sustainable practice for its management.

Ten decadal advances in fungal biology leading towards human well-being

Fungi are an understudied resource possessing huge potential for developing products that can greatly improve human well-being. In the current paper, we highlight some important discoveries and developments in applied mycology and interdisciplinary Life Science research. These examples concern recently introduced drugs for the treatment of infections and neurological diseases; application of -OMICS techniques and genetic tools in medical mycology and the regulation of mycotoxin production; as well as some highlights of mushroom cultivaton in Asia. Examples for new diagnostic tools in medical mycology and the exploitation of new candidates for therapeutic drugs, are also given. In addition, two entries illustrating the latest developments in the use of fungi for biodegradation and fungal biomaterial production are provided. Some other areas where there have been and/or will be significant developments are also included. It is our hope that this paper will help realise the importance of fungi as a potential industrial resource and see the next two decades bring forward many new fungal and fungus-derived products.

Development of Pectin and Poly(vinyl alcohol)-Based Active Packaging Enriched with Itaconic Acid and Apple Pomace-Derived Antioxidants

The production of active and biodegradable packaging materials is an emerging and efficient alternative to plastic packaging materials. By combining poly(vinyl alcohol) (PVA), pectin, and itaconic acid (IA), biodegradable and water-soluble packaging materials can be obtained that can also increase the shelf-life and quality of foodstuff. In the present study, the generated film-forming solutions were enriched with organic or phenolic extracts from apple by-products (apple pomace). These extracts possess an efficient antioxidant activity of 9.70 ± 0.08, and 78.61 ± 0.24 μM Trolox/100 g fresh weight, respectively. Furthermore, the lyophilization of these by-products increased the extract’s organic and phenolic content and the antioxidant activity to 67.45 ± 0.28 and 166.69 ± 0.47 μM Trolox/100 g fresh weight, respectively. These extracts influence the physical-chemical properties of the biofilm solutions by facilitating the polymerization process and thus positively influencing their viscosity. The resulting biofilms presented low water vapor permeability and reduced solubility in water. Adding IA and organic/phenolic compounds facilitates the resistance against intrinsic and extrinsic factors; therefore, they might be applicable in the food industry.

Weathering-independent differentiation of microplastic polymers by reflectance IR spectrometry and pattern recognition

The presence and effects of microplastics in the environment is being continuously studied, so the need for a reliable approach to ascertain the polymer/s constituting them has increased. To characterize them, infrared (IR) spectrometry is commonly applied, either reflectance or attenuated total reflectance (ATR). A common problem when considering field samples is their weathering and biofouling, which modify their spectra. Hence, relying on spectral matching between the unknown spectrum and spectral databases is largely defective. In this paper, the use of IR spectra combined with pattern recognition techniques (principal components analysis, classification and regression trees and support vector classification) is explored first time to identify a collection of typical polymers regardless of their ageing. Results show that it is possible to identify them using a reduced suite of spectral wavenumbers with coherent chemical meaning. The models were validated using two datasets containing artificially weathered polymers and field samples.

Current state and future prospects of sensors for evaluating polymer biodegradability and sensors made from biodegradable polymers: A review

Since the invention of fully synthetic plastic in the 1900s, plastics have been extensively applied in various fields and represent a significant market due to their satisfactory properties. However, the non-biodegradable nature of most plastics has contributed to the accumulation of plastic waste, which poses a threat to both the environment and living beings. Given this, biodegradable polymers have emerged as eco-friendly substitutes for non-biodegradable polymers, and standard test methods have been established to evaluate polymer biodegradability. Technological advancement and the weaknesses of conventional test methods drive the invention of sensors that enable real-time monitoring of biodegradability. Besides, biodegradable polymers have been utilized to make sensors with different functionalities. Given this, the current paper is the first to compare and contrast sensors capable of identifying biodegradable polymers. The detection using sensors represents an innovative perspective for real-time monitoring of biodegradability. Besides, sensors made from biodegradable polymers are included, and these sensors are of different types and show various applications. Finally, the challenges associated with developing these sensors are described to advance future research.

Innovation of Platform Economy Business Model Driven by BP Neural Network and Artificial Intelligence Technology

In order to enhance the competitiveness of enterprises, how to evaluate and enhance the competitiveness of B2B e-commerce enterprises and promote the orderly and healthy development of B2B e-commerce industry are discussed. This paper puts forward the research on the innovation of platform economic business model driven by BP neural network and artificial intelligence technology. BP neural network is used to study and evaluate the competitiveness of B2B e-commerce companies. According to the B2B e-commerce company competitiveness theory and BP neural network algorithm, combined with BP neural network and B2B e-commerce company competitiveness evaluation index system, a BP neural network model is designed to analyze the competitiveness of B2B e-commerce enterprises. Determine the expected value of network samples, select G1 method to determine the subjective weight, and select entropy weight method to determine the objective weight. With the help of the function in the MATLAB neural network toolbox, the neural network is trained. The results show that when the training times reach 3297 times, the sample mean square error is 9.9869e − 06, and the training network reaches convergence. The samples of three enterprises test the trained neural network and input the data of three test samples into the trained BP neural network, and the output results are 0.1531, 0.1371, and 0.1557, respectively. The network model constructed in this paper is effectively close to the training samples. The established BP neural network has good performance and can be used to evaluate the competitiveness of B2B e-commerce companies. Accelerate technological change and realize innovation. Technological capability is the inexhaustible driving force for the development of enterprises. Only with the innovation of keeping pace with the times can application-oriented e-commerce enterprises meet the needs of customers and the market, form the difference between goods or services, and then enable enterprises to win more customers and market share.

Are "liquid plastics" a new environmental threat? The case of polyvinyl alcohol

Despite the pollution induced by plastics become a well-known and documented problem, bringing many countries to adopt restrictions about their production, commercialization and use, the impact of another emerging category of synthetic polymers, represented by the Water-Soluble Polymers (WSPs), also known as "liquid plastics", is overlooked by scientific community. WSPs are produced in large quantities and used in a wide plethora of applications such as food packaging, pharmaceuticals and personal care products, cosmetics and detergents, with a consequent continuous release in the environment. The aim of this study was the investigation of the possible toxicity induced by polyvinyl alcohol (PVA), one of the main produced and used WSPs, on two freshwater model organisms, the crustacean Daphnia magna and the teleost Danio rerio (zebrafish). We evaluated the effects of solubilized standard PVA powder and PVA-based commercial bags for carp-fishing, at 3 different concentrations (1 µg/L, 0.5 mg/L and 1 mg/L), through the exposures for 14 days of D. magna (daphnids; age < 24 h) and for 5 days of zebrafish embryos (up to 120 h post fertilization - hpf). As acute effects we evaluated the immobilization/mortality of specimens, while for chronic toxicity we selected several endpoints with a high ecological relevance, as the behavioural alteration on swimming performance, in real-time readout, and the activity of monoamine oxidase (MAO), a neuro-enzyme with a potential implication in the organism movement. The results showed the lack of significant effects induced by the selected substances, at all tested concentrations and in both model organisms. However, considering the wide plethora of available WSPs, other investigations are needed to provide the initial knowledge of risk assessment of these compounds contained in some consumer products.

The first evidence of the Indian meal moth (Plodia interpunctella) interaction with the silicone moulds

The Indian meal moth (Plodia interpunctella, Lepidoptera) is a common insect species and well-known, widespread kitchen pest. This paper reports the results of their interaction with silicone baking moulds and the evidence for synthetic material decomposition. The obtained fibres exhibited a high level of purification and were characterized by Raman spectroscopy. The reported interaction should be further studied from the biological perspective, as it can be crucial for the remediation of silicones or other synthetic polymers in the environment.

Recent developments in microbial degradation of polypropylene: Integrated approaches towards a sustainable environment

Fossil-fuel-based plastics have many enticing properties, but their production has resulted in significant environmental issues that require immediate attention. Despite the fact that these polymers are manmade, some bacteria can degrade and metabolise them, suggesting that biotechnologies based on the principle of plastic biodegradation could be beneficial. Among different types of plastics, polypropylene (PP), either having low or high density, is one of the most consumed plastics (18.85%). Their debasement under natural conditions is somewhat tricky. Still, their debasement under natural conditions is rather difficult slightly. However, different scientists have still made efforts by employing other microbes such as bacteria, fungi, and guts bacteria of larvae of insects to bio-deteriorate the PP plastic. Pre-irradiation techniques (ultraviolet and gamma irradiations), compatibilizers, and bio-additives (natural fibers, starch, and polylactic acid) have been found to impact percent bio-deterioration of different PP derivatives stronglythe various. The fungal and bacterial study showed that PP macro/microplastic might serve as an energy source and sole carbon during bio-degradation. Generally, gravimetric method or physical characterization techniques such as FTIR, XRD, SEM, etc., are utilized to affirm the bio-degradation of PP plastics-based materials. However, these techniques are not enough to warrant the bio-deterioration of PP. In this regard, a new technique approach that measures the amount of carbon dioxide emitted during bacterial or fungus degradation has also been discussed. In addition, further exploration is needed on novel isolates from plastisphere environments, sub-atomic strategies to describe plastic-debasing microorganisms and improve enzymatic action strategies, and omics-based innovations to speed up plastic waste bio-deterioration.

Upcycling to Sustainably Reuse Plastics

Plastics are now indispensable in daily lives. However, the pollution from plastics is also increasingly becoming a serious environmental issue. Recent years have seen more sustainable approaches and technologies, commonly known as upcycling, to transform plastics into value-added materials and chemical feedstocks. In this review, the latest research on upcycling is presented, with a greater focus on the use of renewable energy as well as the more selective methods to repurpose synthetic polymers. First, thermal upcycling approaches are briefly introduced, including the redeployment of plastics for construction uses, 3D printing precursors, and lightweight materials. Then, some of the latest novel strategies to deconstruct condensation polymers to monomers for repolymerization or introduce vulnerable linkers to make the plastics more degradable are discussed. Subsequently, the review will explore the breakthroughs in plastics upcycling by heterogeneous and homogeneous photocatalysis, as well as electrocatalysis, which transform plastics into more versatile fine chemicals and materials while simultaneously mitigating global climate change. In addition, some of the biotechnological advances in the discovery and engineering of microbes that can decompose plastics are also presented. Finally, the current challenges and outlook for future plastics upcycling are discussed to stimulate global cooperation in this field.

Biodegradation of polyethylene and polystyrene: From microbial deterioration to enzyme discovery

The global production of plastics has continuously been soaring over the last decades due to their extensive use in our daily life and in industries. Although synthetic plastics offer great advantages from packaging to construction and electronics, their low biodegradability induce serious plastic pollution that damage the environment, human health and make irreversible changes in the ecological cycle. In particular, plastics containing only carbon-carbon (C-C) backbone are less susceptible to degradation due to the lack of hydrolysable groups. The representative polyethylene (PE) and polystyrene (PS) account for about 40% of the total plastic production. Various chemical and biological processes with great potential have been developed for plastic recycle and reuse, but biodegradation seems to be the most attractive and eco-friendly method to combat this growing environmental problem. In this review, we first summarize the current advances in PE and PS biodegradation, including isolation of microbes and potential degrading enzymes from different sources. Next, the state-of-the-art techniques used for evaluating and monitoring PE and PS degradation, the scientific toolboxes for enzyme discovery as well as the challenges and strategies for plastic biodegradation are intensively discussed. In return, it inspires a further technological exploration in expanding the diversity of species and enzymes, disclosing the essential pathways and developing new approaches to utilize plastic waste as feedstock for recycling and upcycling.

RAFT Polymerization of a Biorenewable/Sustainable Monomer Via a Green Process

A biorenewable polymer was synthesized via a green process using the RAFT principle for the first time in supercritical CO2 at 300 bar and 80°C. α-Methylene-γ-butyrolactone polymers of various chain lengths and molecular weights were obtained. The molecular weights varied from 10000 up to 20000 with low polydispersity indexes (PDI <1.5). Furthermore, the monomer conversion in supercritical CO2 was substantially higher, respectively 85⁺ % for ScCO2 compared to around 65% for polymerizations conducted in dimethyl formamide (DMF) solvent. Chain extensions were carried out to confirm the livingness of the formed polymers in ScCO2. This opens up future possibilities of the formation of different polymer architectures in ScCO2. The polymers synthesized in ScCO2 have glass transition temperature (Tg) values ranging from 155°C up to 190°C. However, the presence of residual monomer encapsulated inside the formed polymer matrix affected the glass transition of the polymer which was lowered by increasing monomer concentrations. Hence, additional research is required to eliminate the remaining monomer concentration in the polymer matrix in order to arrive at the optimal Tg. This article is protected by copyright. All rights reserved.

Lessons from Biomass Valorization for Improving Plastic-Recycling Enzymes

Synthetic polymers such as plastics exhibit numerous advantageous properties that have made them essential components of our daily lives, with plastic production doubling every 15 years. The relatively low cost of petroleum-based polymers encourages their single use and overconsumption. Synthetic plastics are recalcitrant to biodegradation, and mismanagement of plastic waste leads to their accumulation in the ecosystem, resulting in a disastrous environmental footprint. Enzymes capable of depolymerizing plastics have been reported recently that may provide a starting point for eco-friendly plastic recycling routes. However, some questions remain about the mechanisms by which enzymes can digest insoluble solid substrates. We review the characterization and engineering of plastic-eating enzymes and provide some comparisons with the field of lignocellulosic biomass valorization. Expected final online publication date for the Annual Review of Chemical and Biomolecular Engineering, Volume 13 is October 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Hydrocarbon-based plastics: Progress and perspectives on consumption and biodegradation by insect larvae

The obvious contrast between the remarkable durability and the high consumption of plastic products leads to the deposition of at least 100 million tons of plastics per year in nature. Since 2010, several studies have shown the potential of insect larvae to biodegrade different types of plastics, at higher rates than those reported for microorganisms. This review discusses a compilation of studies about the consumption and biodegradation of hydrocarbon-based plastics, particularly PE, PS, PP and PVC, by lepidopteran and coleopteran larvae. Insects of the Coleoptera order seem to have a better adaptation for PS biodegradation, while those of the Lepidoptera order can better biodegrade PE. Tenebrio molitor biomineralize PE and PS into CO₂, and PVC into HCl; while Tenebrio obscurus and Zophobas atratus converts PE and PS into CO₂, respectively. Plastic biodegradation by T. molitor has been shown to be dependent on microbiota, exception for PE. Similar PS and PE biodegradation profile has been shown for T. obscurus. PS, PP and PE biodegradation by Z. atratus is also reported to be microbial-dependent. For Galleria mellonella, microbial role on PE biodegradation is still controversial, but the PS metabolism was proved to be microbiota-independent. Advances in this field has stimulated new studies with other insect species, which need to be better explored. Uncovering and understanding the chemical processes behind the innate plastic biodegradation by insect larvae will open the perspective to new eco-friendly innovative biotechnological solutions for the challenge of plastic waste.

Rogue one: A plastic story

Plastic comprises of variety of polymers and has many applications, but the waste generated by plastic pose threat to environment and marine life. Plastic can be classified into two types: thermoplastics and thermosetting and are divided into 7 different categories: (Polyethylene Terephthalate [PETE], High-Density Polyethylene [HDPE], Polyvinyl Chloride [PVC], Low-Density Polyethylene [LDPE], Polypropylene [PP], Polystyrene or Styrofoam [PS] & Polycarbonate or ABS [others]). To curb the deleterious effects of plastic waste various methods have been devised and utilized that include chemical, physical and biological treatments. One of the aspects primarily focused by the researchers is the phenomenon of biodegradation and there are many microorganisms (bacteria) that have the ability to carry out this particular process. These bacteria assist biodegradation by production of several enzymes like PETases and MHETases. There are few microorganisms that have been listed which cannot be applied for industrial use due to its low biodegradation capacity. To overcome this problem, PHA is one of the alternatives to replace the synthetic plastic due to its high degrading capacity.

Unraveling the plastic degradation potentials of the plastisphere-associated marine bacterial consortium as a key player for the low-density polyethylene degradation

The omnipresent accumulation and non-degradable nature of plastics in the environment are posing an ever-increasing ecological threat. In this study, a total of 97 bacteria were isolated from macroplastic debris collected from the coastal environments of Andaman Island. The isolates were screened for LDPE degradation potential and were identified based on phenotypic, biochemical, and molecular characterization. 16S rDNA-based identification revealed that three-three isolates of each belong to the genus Oceanimonas and Vibrio, two were closely related to the genus Paenibacillus whereas, one-one was associated with the genus Shewanella, Rheinheimera, and Bacillus, respectively. A bacterial consortium was formulated using the top four isolates based on their individual LDPE degradation potentials. A significant increase (p < 0.05) in the mean LDPE degradation (47.07 ± 6.67% weight-loss) and change in thickness was observed after 120 days of incubation. FTIR spectrum, ¹³C NMR, and TG-DSC analyses demonstrated changes in the LDPE sheets' functional groups, crystallinity, and in thermal properties after 120 days of incubation. The SEM and AFM images confirmed bacterial attachments, an increase in surface roughness and deformities on LDPE sheets. This study reports a bacterial consortium that can efficiently degrade the plastics and can be used in providing eco-friendly mitigation of plastic waste.

Biologically engineered microbes for bioremediation of electronic waste: Wayposts, challenges and future directions

In the face of a burgeoning stream of e-waste globally, e-waste recycling becomes increasingly imperative, not only to mitigate the environmental and health risks it poses but also as an urban mining strategy for resource recovery of precious metals, rare Earth elements, and even plastics. As part of the continual efforts to develop greener alternatives to conventional approaches of e-waste recycling, biologically assisted degradation of e-waste offers a promising recourse by capitalising on certain microorganisms' innate ability to interact with metals or degrade plastics. By harnessing emerging genetic tools in synthetic biology, the evolution of novel or enhanced capabilities needed to advance bioremediation and resource recovery could be potentially accelerated by improving enzyme catalytic abilities, modifying substrate specificities, and increasing toxicity tolerance. Yet, the management of e-waste presents formidable challenges due to its massive volume, high component complexity, and associated toxicity. Several limitations will need to be addressed before nascent laboratory-scale achievements in bioremediation can be translated to viable industrial applications. Nonetheless, vested groups, involving both start-up and established companies, have taken visionary steps towards deploying microbes for commercial implementation in e-waste recycling.

Emerging investigator series: microplastic sources, fate, toxicity, detection, and interactions with micropollutants in aquatic ecosystems - a review of reviews

Hundreds of review studies have been published focusing on microplastics (MPs) and their environmental impacts. With the microbiota colonization of MPs being firmly established, MPs became an important carrier for contaminants to step inside the food web all the way up to humans. Thus, the continuous feed of MPs into the ecosystem has sparked a multitude of scientific concerns about their toxicity, characterization, and interactions with microorganisms and other contaminants. The reports of common subthemes have agreed about many findings and research gaps but also showed contradictions about others. To unravel these equivocal conflicts, we herein compile all the major findings and analyze the paramount discrepancies among these review papers. Furthermore, we systematically reviewed all the highlights, research gaps, concerns, and future needs. The covered focus areas of MPs' literature include the sources, occurrence, fate, existence, and removal in wastewater treatment plants (WWTPs), toxicity, interaction with microbiota, sampling, characterization, data quality, and interaction with other co-contaminants. This study reveals that many mechanisms of MPs' behavior in aquatic environments like degradation and interaction with microbiota are yet to be comprehended. Furthermore, we emphasize the critical need to standardize methods and parameters for MP characterization to improve the comparability and reproducibility of the incoming research.