Environmental impacts of an advanced oxidation process as tertiary treatment in a wastewater treatment plant

A review on sustainable management of biomass: physicochemical modification and its application for the removal of recalcitrant pollutants-challenges, opportunities, and future directions

Adsorption is one of the most efficient methods for remediating industrial recalcitrant wastewater due to its simple design and low investment cost. However, the conventional adsorbents used in adsorption have several limitations, including high cost, low removal rates, secondary waste generation, and low regeneration ability. Hence, the focus of the research has shifted to developing alternative low-cost green adsorbents from renewable resources such as biomass. In this regard, the recent progress in the modification of biomass-derived adsorbents, which are rich in cellulosic content, through a variety of techniques, including chemical, physical, and thermal processes, has been critically reviewed in this paper. In addition, the practical applications of raw and modified biomass-based adsorbents for the treatment of industrial wastewater are discussed extensively. In a nutshell, the adsorption mechanism, particularly for real wastewater, and the effects of various modifications on biomass-based adsorbents have yet to be thoroughly studied, despite the extensive research efforts devoted to their innovation. Therefore, this review provides insight into future research needed in wastewater treatment utilizing biomass-based adsorbents, as well as the possibility of commercializing biomass-based adsorbents into viable products.

A Comprehensive Review on Modification of Titanium Dioxide-Based Catalysts in Advanced Oxidation Processes for Water Treatment

It has become necessary to develop effective strategies to prevent and reduce water pollution as a result of the increase in dangerous pollutants in water reservoirs. Consequently, there is a need to design new catalyst materials to promote the efficiency of advanced oxidation processes (AOPs) in the field of wastewater treatment plant to ensure the mineralization of trace organic contaminants. A notable approach gaining attention involves the coupling of sulfate radicals-based AOPs to photocatalysis or electrocatalysis processes, aiming to achieve the complete removal of refractory contaminants into water and carbon dioxide. Titanium dioxide as metal oxide has received great attention for its catalytic application in water purification. TiO2 catalysts offer a multitude of advantages in AOPs. They are characterized by their high photocatalytic activity under both ultraviolet and visible light, making them environmentally friendly due to the absence of toxic byproducts during oxidation. Their versatility is remarkable, finding utility in various AOPs, from photocatalysis to photo-Fenton processes. TiO2's durability ensures long-lasting catalytic activity, which is crucial for continuous treatment processes, and their cost-effectiveness is particularly advantageous. Furthermore, their chemical stability allows it to withstand varying pH conditions. However, the large band gap energy and low electrical conductivity hinder the catalytic reaction effectiveness. This review aims to examine various approaches to enhance the catalytic performance of titanium dioxide, with the objective of enabling more efficient water purification methods.

Strategies for livestock wastewater treatment and optimised nutrient recovery using microalgal-based technologies

Global sustainable development faces several challenges in addressing the needs of a growing population. Regarding food industries, the heightening pressure to meet these needs has resulted in increased waste generation. Thus, recognising these wastes as valuable resources is crucial to integrating sustainable models into current production systems. For instance, the current 24 billion tons of nutrient-rich livestock wastewater (LW) generated yearly could be recovered and valorised via biological uptake through microalgal biomass. Microalgae-based livestock wastewater treatment (MbLWT) has emerged as an effective technology for nutrient recovery, specifically targeting carbon, nitrogen, and phosphorus. However, the viability and efficacy of these systems rely on the characteristics of LW, including organic matter and ammonium concentration, content of suspended solids, and microbial load. Thus, this systematic literature review aims to provide guidance towards implementing an integral MbLWT system for nutrient control and recovery, discussing several pre-treatments used in literature to overcome the challenges regarding LW as a suitable media for microalgae cultivation.

Bibliometric analysis of Advanced Oxidation Processes studies with a focus on Life Cycle Assessment and Costs

Advanced oxidation processes (AOPs) are wastewater treatment technologies that stand out for their ability to degrade Contaminants of Emerging Concern (CECs). The literature has extensively investigated these removal processes for different aqueous matrices. Once technically mature, some of these systems have become accredited to be applied on a large scale, and therefore, their systemic performances in the environmental and cost spheres have also become essential requirements. This study proposed corroborating this trend, analyzing the available literature on the subject to verify how experts in the AOP area investigated this integration during 2015-2023. For this purpose, a sample of publications was treated by applying the Systematic Review (SR) methodology. This resulted in an extract of 83 studies that adopted life-cycle logic to estimate environmental impacts and process costs or evaluated them as complementary to the technical dimension of each treatment technology. This analysis found that both dimensions can be used for selecting or sizing AOPs at the design scale. However, the appropriate choice of the impact categories for the environmental assessment and establishing a methodology for cost analysis can make the approach still more effective. In addition, a staggering number of processes would broaden the reality and applicability of the estimates, and adopting multicriteria analysis methodologies could address essential aspects of decision-making processes during the design of the arrangements. By meeting the original purposes, the study broadened the requirements for designing AOPs and disseminating their use in mitigating the discharge of CECs.

Wastewater recovery for sustainable agricultural systems in the circular economy - A systematic literature review of Life Cycle Assessments

Water availability and quality are known to affect agricultural production and nutrition. The aim of this study was to elaborate a systematic literature review of the most sustainable ways of wastewater treatment towards achieving circular economy (CE) in agro-industry activities. From the SLR, the authors selected twenty-seven papers that they classified into the three research themes of recovery of wastewater into irrigation water, extraction of sludge for production of bio-based compounds, and recovery of nutrients for soil amendment, including recovering of feeds for aquaculture, and recovery of nutrient biosolids for soil amendment. Results underlined that the recovery of nutrients biosolids for soil amendment can generate a GWP gain up to - 37 kg CO2-eq. So, the review highlighted that wastewater recovery for multiple purposes can be truly effective for the environmental sustainability of agricultural systems, and that LCA is a valid tool to assess and improve that sustainability. Under this perspective, this SLR's findings can stimulate public administrations at national and local scales in their planning and funding activities towards implementing circular bioeconomy paths based upon wastewater recovery for a sustainable, resilient agriculture. Overall, the authors believe that their article was effective in overviewing the current wastewater recovery paths in the CE context, and in highlighting key methodological aspects and findings of the reviewed LCAs, to advance the specialised literature and knowledge, and to guide practitioners for future LCA applications in the field. Finally, through its main findings, the article effectively contributes to the whole research project which it is part of and which the authors are deeply involved in. That research is performed under the Progetto GRINS "Growing Resilient, Inclusive and Sustainable" thanks to a PNRR M4C2- Investment 1.3 - GRINS with the aim of "Building a dataset for the circular economy of the main Italian production systems".

How to choose the best tertiary treatment for pulp and paper wastewater? Life cycle assessment and economic analysis as guidance tools

Pulp and paper wastewater (P&P WW) often requires tertiary treatment to remove refractory compounds not eliminated by conventional biological treatment, ensuring compliance with high-quality effluent discharge or reuse standards. This study employs a life cycle assessment (LCA) methodology to compare alternative tertiary treatment technologies for P&P WW and rank them accordingly. The evaluated technologies in the scenarios include inorganic (S1) and organic (S2) coagulation-flocculation, ozonation (O3) (S3), O3+granular activated carbon (GAC) (S4), and ultrafiltration (UF)+reverse osmosis (RO) (S5). The analysis focuses on a P&P wastewater treatment plant (WWTP) in Northeastern Italy. The LCA is complemented by an economic analysis considering each technology's capital and operating costs, as well as potential revenues from internal effluent reuse. Results indicate that S4 (O3+GAC) outranks all the other scenarios in terms of both environmental performance and economic viability, primarily due to the advantages associated with effluent reuse. S5 (UF+RO), which also involves reuse, is limited by the high energy consumption of UF+RO, resulting in increased environmental impacts and costs. The physicochemical scenario S2 (Chem Or), currently utilized in the WWTP under study, remains the best-performing technology in the absence of effluent reuse. In contrast, S3 (O3 alone) exhibits the poorest environmental and economic outcomes due to substantial energy requirements for O3 generation and the inability to reuse the treated effluent directly. Lastly, a sensitivity analysis underscores the strong influence of chemical dosages in S1 and S2 on environmental and economic impacts, which is more significant than the impact of water reuse percentages in S4 and S5. The high electricity cost observed during 2022 negatively affects the energy-intensive scenarios (S3-S5), making coagulation-flocculation (S1-S2) even more convenient.

FeSO4·7H2O optimisation of earthed atomising corona discharge (Fe-EACD) a process for the pharmaceutical wastewater treatment

Pharmaceutical residues can cause serious water pollution problems, harm human health and destroy the ecological balance. FeSO4·7H2O optimisation of the earthed atomising corona discharge (Fe-EACD) process was used to dispose of pharmaceutical wastewater in this research. Experiments were analyzed by VI characteristic curves to optimise the electrode distance (20-50 mm) and wire electrode diameter (0.3-0.5 mm). The effects of discharging voltage (7-12 kV), time (0-54 min) and FeSO4 dosage (0.2-1.2 g/L) were investigated using the response surface methodology (RSM). According to the RSM results, the best removal efficiency of COD (89.6%) was detected at the optimal discharging voltage of 12 kV, time of 42 min and Fe2+ concentration of 0.4 g/L. The Fe-EACD process could work efficiently with BOD5/COD ratio moving to 0.49 in an acid environment. The kinetic analysis and mechanism study suggested that the Fe-EACD process was demonstrated well by the pseudo-first-order based on the correlation coefficient (R2). Active •OH producing in the EACD process is responsible for the COD removal and the FeSO4·7H2O as a catalyst can promote the formation of active hydroxyl. In other words, EACD with Fe2+ optimisation was an economic and feasible process for pharmaceutical wastewater treatment.

Optimization of Binary Adsorption of Metronidazole and Sulfamethoxazole in Aqueous Solution Supported with DFT Calculations

Sulfamethoxazole [SMX] and metronidazole [MNZ] are emergent pollutants commonly found in surface water and wastewater, which can cause public health and environmental issues even at trace levels. An efficient alternative for their removal is the application of adsorption technology. The present work evaluated single and binary adsorption processes using granular activated carbon (CAG F400) for SMX and MNZ in an aqueous solution. The binary adsorption process was studied using a Box–Behnken experimental design (RSD), and the results were statistically tested using an analysis of variance. Density functional theory (DFT) modeling was employed to characterize the interactions between the antibiotics and the CAG F400 surface. For the individual adsorption process, adsorption capacities (qe) of 1.61 mmol g−1 for SMX and 1.10 mmol g−1 for MNZ were obtained. The adsorption isotherm model that best fit experimental data was the Radke–Prausnitz isotherm model. The adsorption mechanism occurs through electrostatic and π-π dispersive interactions. For the binary adsorption process, the total binary adsorption capacity achieved was 1.13 mmol g−1, evidencing competitive adsorption. The significant factors that determine the removal of SMX and MNZ from a binary solution were the solution pH and the initial concentration of antibiotics. From DFT studies, it was found that SMX adsorption on CAG F400 was favored with adsorption energy (Eads) of −10.36 kcal mol−1. Finally, the binary adsorption results corroborated that the adsorption process was favorable for both molecules.

Life Cycle Assessment of UV-C based treatment systems for the removal of compounds of emerging concern from urban wastewater

In the last decades particular attention is being paid to the efficient and effective removal of compounds of emerging concern (CECs) present in wastewater before their eventual reuse or disposal. Several technologies have been developed for the degradation of CECs in aqueous matrix, in this regard advanced oxidation processes (AOPs) represent a nascent technological solution developed on a laboratory scale with applications on a prototype scale. The experimental evidences have shown that AOPs processes can oxidize numerous organic compounds in a much faster and more efficient way than that of the most common disinfection processes. The most common AOPs processes are those that involve the use of H₂O₂/UV, O₃/UV, H₂O₂/O₃, H₂O₂/O₃/UV, Fenton and photo-Fenton. The aim of this work is to illustrate the results of a comparative LCA study of a laboratory scale UV-C photoreactor for the tertiary treatment of urban wastewater of three treatment systems (UV-C, UV-C + H₂O₂ e UV-C + TiO₂). In particular, the specific objective is to evaluate, from an environmental point of view, an innovative advanced oxidation system based on nanostructures TiO₂ immobilized on a stainless steel mesh. Compared to the UV-C photolysis reference system, the addition of hydrogen peroxide reduces the total environmental impact of the system by almost 75 %, while the use of the stainless-steel mesh coated by the nanostructures titanium dioxide reduces the UV-C environmental impact by 30 %. These results are due to the lower energy consumption of these last treatments compared to photolysis alone. The main impacts of the three systems are related to the electric power consumption of the centrifugal pump (63-64 %) and of the UV-C lamp (32-33 %). The LCA applied to these systems has shown that TiO₂ assisted photocatalysis is not yet advantageous from an environmental point of view and that, therefore, the efficiency of the system needs to be improved.

Carbon dots decorated magnetite nanocomposite obtained using yerba mate useful for remediation of textile wastewater through a photo-Fenton treatment: Ilex paraguariensis as a platform of environmental interest-part 2

Two carbon dots (CD) with diameters of 4.9 ± 1.5 and 4.1 ± 1.2 nm were successfully synthesized through an acid ablation route with HNO₃ or H₂SO₄, respectively, using Ilex paraguariensis as raw material. The CD were used to produce magnetite-containing nanocomposites through two different routes: hydrothermal and in situ. A thorough characterization of the particles by transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), dynamic light scattering (DLS), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) indicates that all nanomaterials have spherical-like morphology with a core-shell structure. The composition of this structure depends on the route used: with the hydrothermal route, the shell is composed of the CD, but with the in situ process, the CD act as nucleation centers, and so the iron oxide domains are in the shell. Regarding the photocatalytic mechanism for the degradation of methyl orange, the interaction between the CD and the magnetite plays an important role in the photo-Fenton reaction at pH 6.2, in which ligand-to-metal charge transfer processes (LTMCT) allow Fe²⁺ regeneration. All materials (100 ppm) showed catalytic activity in the elimination of methyl orange (8.5 ppm), achieving discoloration of up to 98% under visible irradiation over 400 nm in 7 h. This opens very interesting possibilities for the use of agro-industrial residues for sustainable synthesis of catalytic nanomaterials, and the role of the interaction of iron-based catalysts with organic matter in heterogeneous Fenton-based processes.

Various advanced wastewater treatment methods to remove microplastics and prevent transmission of SARS-CoV-2 to airborne microplastics

Microplastics (MPs) and SARS-CoV-2 interact due to their widespread presence in our environment and affect the virus' behaviour indoors and outdoors. Therefore, it is necessary to study the interaction between MPs and SARS-CoV-2. The environmental damage caused by MPs is increasing globally. Emerging pollutants may adversely affect organisms, especially sewage, posing a threat to human health, animal health, and the ecological system. A significant concern with MPs in the air is that they are a vital component of MPs in the other environmental compartments, such as water and soil, which may affect human health through ingesting or inhaling. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membrane bioreactors, advanced oxidation processes, adsorption, etc., are highly effective in removing MPs; they can still serve as an entrance route due to their constantly being discharged into aquatic environments. Following that, an analysis of each process for MPs' removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, an airborne microplastic has been reported in urban areas, raising health concerns since aerosols are considered a possible route of SARS-CoV-2 disease transmission and bind to airborne MP surfaces. The MPs can be removed from wastewater through conventional treatment processes with physical processes such as screening, grit chambers, and pre-sedimentation.

Tertiary Wastewater Treatment Technologies: A Review of Technical, Economic, and Life Cycle Aspects

The activated sludge process is the most widespread sewage treatment method. It typically consists of a pretreatment step, followed by a primary settling tank, an aerobic degradation process, and, finally, a secondary settling tank. The secondary effluent is then usually chlorinated and discharged to a water body. Tertiary treatment aims at improving the characteristics of the secondary effluent to facilitate its reuse. In this work, through a literature review of the most prominent tertiary treatment methods, a benchmarking of their technical efficiency, economic feasibility, and environmental impact was carried out. The photo-Fenton method proved to be the most technically efficient process, significantly reducing the microbial load and pharmaceutical content (by 4.9 log and 84%, respectively) of the secondary effluent. Chlorination and UV irradiation exhibited the lowest treatment costs (0.004 EUR/m−3) and the lowest global warming potential (0.04 and 0.09 kg CO2eq. m−3, respectively). After all the data were aggregated, a decision-making tool was constructed in the form of a ternary diagram, which indicates the most appropriate tertiary treatment method according to the weight-per-process aspect (technical, economic, and environmental) selected by the user, with chlorination, UV irradiation, ozonation, microalgae cultivation, and constructed wetlands prevailing in the final results.

Microalgae-bacteria tandem-type ponds simultaneously removing ammonia nitrogen and phosphorus towards municipal wastewater advanced treatment

Low C/N municipal wastewater is difficult to be treated effectively via traditional biological methods, leading to concentrations of pollutants in effluent far exceeding increasingly strict standards. In this work, we propose a novel microalgae-bacteria tandem-type process to simultaneously remove ammonia nitrogen (NH₄⁺-N) and phosphorus (P) from municipal wastewater. A 4.5 L microalgae-bacteria tandem-type reactor was constructed and operated stably for 40 days. The removal efficiencies of NH₄⁺-N and P reached 97.5% and 92.9%, respectively, effluent concentrations were 0.53 and 0.17 mg/L on average, which met the Environmental quality standards for surface water in China (GB 3838-2002). Remarkably, microalgae ponds accounted for 69.3% and 76.3% of the overall NH₄⁺-N and P removal via microalgae assimilation. Furthermore, 16 S rRNA gene amplicon sequencing revealed the abundance of bacteria changed, suggesting that the presence of microalgae leads to some species extinction and low-abundance bacteria increase. This work demonstrated that the microalgae-bacteria tandem-type processes can be efficient and widely applied in the advanced treatment of municipal wastewater.

Prioritization of micropollutants in municipal wastewater and the joint inhibitory effects of priority organic pollutants on Vibrio qinghaiensis sp.-Q67

Treatment of wastewater in municipal wastewater treatment plants has become a major barrier to organic pollutants entering the aquatic environment. In this study, qualitative screening of organic micropollutants was conducted in a typical municipal wastewater treatment plant (MWWTP) using gas chromatography-mass spectrometry (GC-MS). The identified compounds were prioritized according to their comprehensive scores ranked by detection frequency, semi-quantitative concentration, bioaccumulation, ecotoxicity, and biodegradability. The results showed dibutyl phthalate, antioxidant 2246, methyl stearate, 2,4,6-tri‑tert-butylphenol, and dioctyl phthalate had the top five scores and were ranked as priority organic pollutants in the municipal wastewater. The individual and joint toxicity determinations of the five compounds were carried out by a bioluminescence inhibition assay using Vibrio qinghaiensis sp.-Q67 (V. qinghaiensis). The individual toxicity assay results of these pollutants on V. qinghaiensis demonstrated that the order of the acute toxicity of the five priority organic pollutants was as follows: dioctyl phthalate> dibutyl phthalate> methyl stearate> antioxidant 2246> 2,4,6-tri‑tert-butylphenol. The joint toxicity showed partial addition or antagonism among these pollutants. The prediction results of the mixed toxicity were compared between the concentration addition model and the independent action model, indicating that a single traditional prediction model could not accurately predict the mixed toxicity of different types of organic pollutants, and that a comprehensive application of model prediction could improve the accuracy of mixed toxicity prediction. This method could provide a theoretical basis for systematic screening and toxicity prediction of pollutants in wastewater.

Synthesis of Fe2O3/Mn2O3 Nanocomposites and Impregnated Porous Silicates for Dye Removal: Insights into Treatment Mechanisms

Fe2O3/Mn2O3 nanocomposites and impregnated porous silicates (Fe2O3/Mn2O3@SiO2 [FMS]) were prepared and investigated as catalytic adsorbents. The catalysts were applied for cationic and anionic dye pollutants in the adsorption, Fenton reaction, and photocatalysis processes at a pH of 7. Fe2O3/Mn2O3 nanoparticles (FM-NPs) were prepared using the co-precipitation method and were impregnated in SiO2 by the sol–gel process. The synthesized materials were characterized using various sophisticated techniques. Results indicated that the impregnation of bi-metallic NPs in SiO2 increased the surface area, and the function of the adsorbent also improved. FMS showed a significant adsorption effect, with 79.2% rhodamine B removal within 15 min. Fenton and photocatalyst reaction showed removal rates of 85.3% and 97.9%, respectively, indicating that negatively charged porous silicate attracts cationic pollutants. In the case of the anionic pollutant, Congo red, the adsorption reaction of FMS did not occur, and the removal rate of the photocatalyst reaction was 79%, indicating the repulsive force between the negatively charged silica and the anionic dye. Simultaneously, bi-metal-bonded FM-NPs facilitated the photocatalytic reaction, reducing the recombination of electron-hole pairs. This study provides new insights into the synthesis of FM-NPs and FMS as photocatalytic adsorbents and their photocatalytic mechanisms based on reaction conditions and contaminant characteristics. The developed materials have potential applications for environmental mitigation.

Nanostructured photocatalysts for the abatement of contaminants by photocatalysis and photocatalytic ozonation: An overview

The water scarcity, the presence of different contaminants in the worldwide waters and wastewaters and their impacts should motivate their good elimination and water management. With this, photocatalysis and photocatalytic ozonation are strong solutions to obtain good quality reclaimed water, for different applications. Nanostructured supported photo-active catalysts, such as the TiO₂, WO₃ or ZnO can positively affect the performance of such technologies. Therefore, different semiconductors materials have been aroused the interest of the scientific community, mainly due to its functional properties as well as characteristics imposed by the different nanostructures. With this, this work overviews different works and perspective on the TiO₂ nanotubes and other semiconductors nanostructures, with the analysis of different works from 2001 to 2022. Aspects as the substrate effect, electrolyte nature, aspect ratio, electrolyte aging, and annealing treatment but also the effect of morphology, anodization time, applied voltage, temperature and viscosity are discussed. Modification of TiO₂ nanotubes is also presented in this paper. The main objective of this work is to present and discuss the key parameters and their effects on the anodization of different semiconductors, as well as the results obtained until today on the degradation of different contaminants by photocatalysis and photocatalytic ozonation, as well as their use on the treatment of real wastewater. TiO₂ nanotubes present unique properties and highly ordered configuration, which motivate their use on photo-driven technologies for the pollutant's abatement, even when compared to other nanostructures. However, photocatalysts with activity on the visible range and solar radiation, such as the WO₃, can present higher performance and can decrease operational costs, and must be an important source and a key to find efficient and cost-friendly solutions.

Life cycle assessment as decision support tool for water reuse in agriculture irrigation

This study presents a decision support tool that evaluates the environmental efficiency of water reclamation for agricultural irrigation, among other options. The developed tool is published as open source at https://doi.org/10.18167/DVN1/YLP1BA. The objective of this decision support tool is to facilitate the interpretation of the Life Cycle Assessment (LCA) results. This framework was applied to a representative case of reuse of reclaimed water for vine irrigation at the Murviel-Les-Montpellier experimental site (Hérault, France). It was then generalized through modeling assumptions to consider different reuse scenarios. To highlight situations in which the supply of recycled water for irrigation may or may not provide significant environmental benefits, three main parameters were varied: (i) tertiary treatment technologies, (ii) availability of conventional water sources, (iii) energy mix composition. The results show that the environmental impact of reclaimed water depends directly on the type of tertiary treatment technology and the location of the treatment plant in relation to the field and other water sources. The decision support tool has identified where wastewater reuse is clearly an environmentally beneficial source of irrigation among surface and groundwater sources (e.g., WWTP closer to field than river, groundwater too deep, tertiary treatment environmentally beneficial). However, there are many situations where the decision support process cannot distinguish between water reuse for agricultural irrigation and conventional water sources, especially when the nutrient content of treated municipal wastewater is insufficient to offset the negative effects of high energy requirements and chemicals of tertiary treatment.

Iron oxide nanoparticles embedded in organic microparticles from Yerba Mate useful for remediation of textile wastewater through a photo-Fenton treatment: Ilex paraguariensis as a platform of environmental interest - Part 1

Seven composites of iron oxide nanoparticles embedded in organic microparticles mediated by Cu(II) were synthesized using yerba mate (Ilex paraguariensis) dry leaf extract as precipitant, capping agent, and dispersant medium, using different Cu/Fe molar ratios. A thorough characterization of the particles by transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis-mass spectrometry (TGA-MS), Fourier transform infrared spectrometer (FTIR), and atomic absorption-spectrometry (AA) indicates that all materials have spheric-like morphology with nanoparticles composed by metal oxide phases embedded into organic microparticles. Interestingly, this organic matter is proposed to play an important role in the solids' photocatalytic activity in a photo-Fenton reaction, in which iron photo-leaching was elucidated, and a mechanism through ligand-to-metal charge transfer processes was proposed. All materials showed catalytic activity in the methyl orange elimination, achieving discolorations up to 96% in 2 h under UV irradiation at 375 nm. An experimental correlation between all samples' UV/Vis spectra and their performances for methyl orange discoloration was observed. This process opens a landscape very interesting for the use of agroindustrial residues for green synthesis of metal oxide nanomaterials and their use and understanding of organo-metallic systems participation in Fenton-based processes.

A state of the art review on electrochemical technique for the remediation of pharmaceuticals containing wastewater

Pharmaceutical wastewater is a frequent kind of wastewater with high quantities of organic pollutants, although little research has been done in the area. Pharmaceutical wastewaters containing antibiotics and high salinity may impair traditional biological treatment, resulting in the propagation of antibiotic resistance genes. The potential for advanced oxidation processes (AOPs) to break down hazardous substances instead of present techniques that essentially transfer contaminants from wastewater to sludge, a membrane filter, or an adsorbent has attracted interest. Among a variety of AOPs, electrochemical systems are a feasible choice for treating pharmaceutical wastewater. Many electrochemical approaches exist now to remediate rivers polluted by refractory organic contaminants, like pharmaceutical micro-pollutants, which have become a severe environmental problem. The first part of this investigation provides the bibliometric analysis of the title search from 1970 to 2021 for keywords such as wastewater and electrochemical. We have provided information on relations between keywords, countries, and journals based on three fields plot, inter-country co-authorship network analysis, and co-occurrence network visualization. The second part introduces electrochemical water treatment approaches customized to these very distinct discarded flows, containing how processes, electrode materials, and operating conditions influence the results (with selective highlighting cathode reduction and anodic oxidation). This section looks at how electrochemistry may be utilized with typical treatment approaches to improve the integrated system's overall efficiency. We discuss how electrochemical cells might be beneficial and what compromises to consider when putting them into practice. We wrap up our analysis with a discussion of known technical obstacles and suggestions for further research.

Treatability of hazardous substances in industrial wastewater: case studies for textile manufacturing and leather production sectors

Hazardous substances used and produced by different industrial activities pose a potential risk to the environment and to human health. Different physicochemical and/or biological processes are used in industrial wastewater treatment; these methods, however, may not be effective in removing these substances. This study was carried out to comparatively evaluate the removal of hazardous substances through conventional wastewater treatment processes that are used by major industries in Turkey. A four-season monitoring study was carried out in textile manufacturing and leather production sectors, representing industrial activities in Turkey. Samples were analyzed for 45 priority substances defined by the European Union and 250 specific pollutants listed in the Turkish Regulation on Surface Water Quality. For both wastewaters, where biological treatment was performed after pretreatment, their characteristics showed that organics were almost completely removed. except for dichloromethane (44-51% removals) and dioxin and dioxin-like compounds (64-69% removals). Additionally, different removal ratios (16-97%) were obtained for metals; the poorer removal was observed for B, Ba, Ag, Sb, and Si. The remaining metals (Cu, Pb, Sb, V, Si for textile; Cr, Cu, Sb, Si for leather effluents) in the treated wastewaters were still higher than environmental quality standards (EQS) of receiving water bodies. The study revealed that existing treatment processes were not adequate for efficient hazardous substance removal and there is an urgent need to improve them. Finally, advanced treatment technologies were suggested for specific pollutants together with their unit treatment costs.

Improving Wastewater Treatment by Triboelectric-Photo/Electric Coupling Effect

The ability to meet higher effluent quality requirements and the reduction of energy consumption are the biggest challenges in wastewater treatment worldwide. A large proportion of the energy generated during wastewater treatment processes is neglected and lost in traditional wastewater treatment plants. As a type of energy harvesting system, triboelectric nanogenerators (TENGs) can extensively harvest the microscale energies generated from wastewater treatment procedures and auxiliary devices. This harvested energy can be utilized to improve the removal efficiency of pollutants through photo/electric catalysis, which has considerable potential application value in wastewater treatment plants. This paper gives an overall review of the generated potential energies (e.g., water wave energy, wind energy, and acoustic energy) that can be harvested at various stages of the wastewater treatment process and introduces the application of TENG devices for the collection of these neglected energies during wastewater treatment. Furthermore, the mechanisms and catalytic performances of TENGs coupled with photo/electric catalysis (e.g., electrocatalysis, photoelectric catalysis) are discussed to realize higher pollutant removal efficiencies and lower energy consumption. Then, a thorough, detailed investigation of TENG devices, electrode materials, and their coupled applications is summarized. Finally, the intimate coupling of self-powered photoelectric catalysis and biodegradation is proposed to further improve removal efficiencies in wastewater treatment. This concept is conducive to improving knowledge about the underlying mechanisms and extending applications of TENGs in wastewater treatment to better solve the problems of energy demand in the future.

Investigation of PEG directed Sb2WO6 for dyes removal from wastewater

Pristine and polyethylene glycol assisted antimony tungstate (Sb₂WO₆) was developed via hydrothermal route. The pristine and surfactant assisted Sb₂WO₆ were further exemplified to reveal the properties of the samples. The bandgap calculated for Sb₂WO₆, 5 ml PEG- Sb₂WO₆, 10 ml PEG- Sb₂WO₆ was 2.78 eV, 2.66 eV and 2.21 eV. The 10 ml PEG assisted sample exhibited narrow bandgap. The Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed metal vibrations and stretching of the water molecules adsorbed. The Raman spectra showed the vibrational modes present in Sb₂WO₆. The morphology was analyzed employing transmission electron microscope (TEM) for all samples. Pristine Sb₂WO₆ showed growth of nanorods with higher dimensions with high agglomeration. 5 ml PEG- Sb₂WO₆ showed the growth of nanorods with lesser agglomeration. 10 ml PEG assisted Sb₂WO₆ exhibited distinct growth of nanorods with no agglomeration on the surface. The elemental composition was examined employing X-ray Photoelectron Spectroscopy. Prepared product photocatalytic behaviour was tested employing Rhodamine B dye degrading. Different catalyst loading were investigated for degrading the toxic pollutants. 0.2 g 10 ml PEG-Sb₂WO₆ showed 81% efficiency on degrading the toxic pollutant from wastewater. The OH radicals are accountable for photocatalytic behaviour of prepared photocatalyst. The 10 ml PEG-Sb₂WO₆ has the good reusability behavior and stable properties after three cycles. The prepared 10 ml PEG- Sb₂WO₆ photocatalyst will be the potential candidate for the remediation of the water treatment.

Selecting the most environmentally friendly oxidant for UVC degradation of micropollutants in urban wastewater by assessing life cycle impacts: Hydrogen peroxide, peroxymonosulfate or persulfate?

The quality of water bodies has been decreasing over time. Urban wastewater treatment plants (UWWTPs) are key players to avoid that potentially toxic micropollutants reach the environment, and advanced treatment processes are being applied to address this issue. However, several variables have to be taken into account, particularly environmental sustainability. The aim of this study is to assess the life cycle impacts of combining UVC with different oxidants - hydrogen peroxide (H₂O₂), peroxymonosulfate (PMS) and persulfate (PS) -, considering different concentrations (0.05, 0.20 and 0.50 mM) and UVC dosages of 42, 63 and 170 J/L, corresponding to UV contact times of 4, 7 and 18 s in a specific industrial equipment. UVC/PMS was the worst performing process (despite being able to achieve removals similar to UVC/H₂O₂), followed by UVC/PS. Both would only be preferred relatively to H₂O₂ if much lower concentrations of PMS or PS could be used to achieve the same removal of micropollutants (10 times lower was not enough). Additionally, PMS and PS production contributes more to the environmental footprint than the electricity use, unlike H₂O₂. Therefore even if considering lower treatment times when using sulfate-based oxidants, these will still be more impactful than using H₂O₂ at the studied conditions. Based on both avoided and generated impacts, H₂O₂ is the best option environmentally. In this case, the environmental impacts are more affected by an increase in treatment time rather than by an increase in the H₂O₂ concentration. It is thus best to opt for a higher concentration and the lowest treatment time possible for a significant ecotoxicity reduction. Electricity is a relevant parameter in all cases and its impact can be reduced in nearly all endpoint categories by opting for cleaner energy sources.

Comparative Life Cycle Assessment of two advanced treatment steps for wastewater micropollutants: How to determine whole-system environmental benefits?

Advanced wastewater treatment (AWT) technologies are now considered to target urban micropollutants (MPs) before discharge into receiving water bodies and to comply with specific criteria for reuse. Extra energy and/or resources are necessary to achieve the elimination of MPs. Using the Life Cycle Assessment framework, this study assesses net environmental efficiencies for two AWTs (i) ozone systems (air-fed and pure oxygen-fed) and (ii) granular activated carbon filter. Sixty-five MPs with proven removal efficiency values and toxicity and/or ecotoxicity potentials were included in this study building on results from recent research. Consolidated Life Cycle Inventories with data quality and uncertainty characterization were produced with an emphasis on operational inputs. Results show that the direct water quality benefits obtained from AWT are outweighed by greater increases in indirect impacts from energy and resource demands. Future research should include water quality aspects not currently captured in life cycle impact assessment, such as endocrine disruption and whole-effluent toxicity, in order to assess the complete policy implications of MP removal strategies.

The source and fate of Mycobacterium tuberculosis complex in wastewater and possible routes of transmission

BACKGROUND

The Mycobacterium tuberculosis complex (MTBC) consists of causative agents of both human and animal tuberculosis and is responsible for over 10 million annual infections globally. Infections occur mainly through airborne transmission, however, there are possible indirect transmissions through a faecal-oral route which is poorly reported. This faecal-oral transmission could be through the occurrence of the microbe in environments such as wastewater. This manuscript, therefore, reviews the source and fate of MTBC in the wastewater environment, including the current methods in use and the possible risks of infections.

RESULTS

The reviewed literature indicates that about 20% of patients with pulmonary TB may have extra-pulmonary manifestations such as GITB, resulting in shedding in feaces and urine. This could potentially be the reason for the detection of MTBC in wastewater. MTBC concentrations of up to 5.5 × 105 (±3.9 × 105) copies/L of untreated wastewater have been reported. Studies have indicated that wastewater may provide these bacteria with the required nutrients for their growth and could potentially result in environmental transmission. However, 98.6 (± 2.7) %, removal during wastewater treatment, through physical-chemical decantation (primary treatment) and biofiltration (secondary treatment) has been reported. Despite these reports, several studies observed the presence of MTBC in treated wastewater via both culture-dependent and molecular techniques.

CONCLUSION

The detection of viable MTBC cells in either treated or untreated wastewater, highlights the potential risks of infection for wastewater workers and communities close to these wastewater treatment plants. The generation of aerosols during wastewater treatment could be the main route of transmission. Additionally, direct exposure to the wastewater containing MTBC could potentially contribute to indirect transmissions which may lead to pulmonary or extra-pulmonary infections. This calls for the implementation of risk reduction measures aimed at protecting the exposed populations.

A Multi-Criteria Decision-Making Approach to Evaluate Different UVC/H2O2 Systems in Wastewater Treatment

High azoxystrobin (AZO), difenoconazole (DFZ), and imidacloprid (IMD) pesticide removal rates in sixteen bench-scale experiments concerning tomato washing water treatment were obtained through a UVC/H2O2 advanced oxidative process. Experimental conditions ([H2O2]0) and irradiance (EUVC) were optimized for higher degradation rates (pseudo-first-order reaction). To consider both economic aspects and environmental impacts when defining the treatment technology, as well as technological requirements, this study applied a multi-criteria decision-making method (MCDM) to assess and differentiate similar UVC/H2O2 process configurations. This allowed for the identification of the cheapest experimental arrangement with the lowest associated environmental impacts, coupled to the highest degradation rate (kIMD). After consulting experts to determine the importance of the applied criteria and measuring alternative performances, experiment E7 ([H2O2]0 = 43.5 mg L−1; EUVC = 15.0 W m−2; kIMD = 0.236 s−1) was determined as meeting the three criteria in a balanced manner. Although E7′s technological performance regarding degradation rate did not achieve the best individual result, it presented the lowest impacts and costs among the analyzed series, although alternatives are sensitive to decision-maker priorities. This study considered different factors of a process displaying potential industrial applications still in the design stage to achieve a more efficient and balanced solution.

Evaluation of Sand Filtration and Activated Carbon Adsorption for the Post-Treatment of a Secondary Biologically-Treated Fungicide-Containing Wastewater from Fruit-Packing Industries

In this work, a sand filtration-activated carbon adsorption system was evaluated to remove the fungicide content of a biologically treated effluent. The purification process was mainly carried out in the activated carbon column, while sand filtration slightly contributed to the improvement of the pollutant parameters. The tertiary treatment system, which operated under the batch mode for 25 bed volumes, resulted in total and soluble COD removal efficiencies of 76.5 ± 1.5% and 88.2 ± 1.3%, respectively, detecting total COD concentrations below 50 mg/L in the permeate of the activated carbon column. A significant pH increase and a respective electrical conductivity (EC) decrease also occurred after activated carbon adsorption. The total and ammonium nitrogen significantly decreased, with determined concentrations of 2.44 ± 0.02 mg/L and 0.93 ± 0.19 mg/L, respectively, in the activated carbon permeate. Despite that, the initial imazalil concentration was greater than that of the fludioxonil in the biologically treated effluent (i.e., 41.26 ± 0.04 mg/L versus 7.35 ± 0.43 mg/L, respectively). The imazalil was completely removed after activated carbon adsorption, while a residual concentration of fludioxonil was detected. Activated carbon treatment significantly detoxified the biologically treated fungicide-containing effluent, increasing the germination index by 47% in the undiluted wastewater or by 68% after 1:1 v/v dilution.

Application of (V)UV/O3 technology for post-treatment of biologically treated wastewater: A pilot-scale study

For the first time, high energy VUV photons and generation of O₃ by (V)UV lamps were applied together for removal of active pharmaceutical ingredients (APIs) from biologically treated wastewater (BTWW) in pilot-scale. The core of the pilot container unit was a photoreactor assembly consisting of six photoreactors, each containing a low-pressure Hg lamp (UV dose of 1.2 J/cm² and 6.6 J/cm² at 185 nm and 254 nm, respectively). BTWW was irradiated (4.75 min residence time) by (V)UV light in presence of in situ photochemically generated O₃ from coolant air of the lamps. Experiments were conducted at the site of two wastewater treatment plants. Out of seven target APIs (namely carbamazepine, ciprofloxacin, clarithromycin, diclofenac, metoprolol, sitagliptin, and sulfamethoxazole), 80-100% removal was accomplished for five and 40-80% for two compounds. Two degradation products of carbamazepine were detected. Degradation products of other target compounds were not found. The applied O₃ dose was 30-45 μg O₃/mg dissolved organic carbon. Inactivation of up to log-4.8, log-4.5 and log-3.8 could be achieved for total coliform, Escherichia coli and Enterococcus faecalis, respectively. SOS Chromotest indicated no genotoxicity nor acute toxicity. Generation of neither NH₄⁺, NO₂^- nor NO₃^- was observed during post-treatment. Electric energy per order values were calculated for the first time for (V)UV/O₃ treatment in BTWW with a median value of 1.5 kWh/m³. This technology can be proposed for post-treatment of BTWWs of small settlements or livestock farms to degrade micropollutants before water discharge or for production of irrigation water. Further studies are essential in pilot-scale for other applications.

Can thermal intensification be considered a sustainable way for greening Fenton processes?

Life cycle assessment and kinetic modeling were used to elucidate the impact of thermal intensification (TI) on resource consumption and the techno-economic feasibility of a Fenton process at laboratory scale. Increasing temperature from 25 to 55 °C lowers treatment time (96.5%) and electricity use (67.8%) due to the positive impact of temperature on the reaction rate; however, beyond 50 °C no significant diminution in energy use, emissions, and operating cost was observed. The environmental footprint of the process is linked with energy use, operating pH, and the electricity share of the country; nevertheless, the impact of transport and infrastructure materials was lower. At 55 °C and pH of 2.8, emissions of precursors of freshwater and marine eutrophication, particulate matter formation, and ionizing radiation were reduced more than half; besides, in most of the midpoint categories, pondered by the ReCiPe-2016 method, emissions were lowered ca. 43.3%. The endpoint categories human health, ecosystem quality, and resource availability had a significant decline in disability-adjusted life years (46.0%), time-integrated species loss (42.0%), and surplus cost (33.1%). Harnessing the energy present in the wastewater itself decreased 41.9% global warming potential (GWP), but the use of steam for heating raised it 718.8%. In countries where electricity generation is dependent on fossil fuels, GWP could increase (2.0-20.0%) whereas GWP would decrease (8.8-9.4%) when renewable energy sources dominate. Operating at 55 °C and pH of 5.5 rose the reaction time (1835.5%), GWP (29.3%), particulate matter formation (44.3%), terrestrial acidification (21.8%), marine (48.9%), and freshwater eutrophication (66.7%). TI of Fenton processes could increase their treatment capacity with a small reduction in the quality of the effluent; furthermore, they can be made affordable for low-to-medium scale industries in emerging economies due to decreased resources consumption and emissions, leading to a lower treatment cost (US$0.49/m³).

Preparation, Characterization of Graphitic Carbon Nitride Photo-Catalytic Nanocomposites and Their Application in Wastewater Remediation: A Review

Energy crisis and environmental pollution are the major problems of human survival and development. Photocatalytic technology can effectively use solar energy and is prospective to solve the above-mentioned problems. Carbon nitride is a two-dimensional polymer material with a graphite-like structure. It has good physical and chemical stabilities, unique chemical and electronic energy band structures, and is widely used in the field of photocatalysis. Graphitic carbon nitride has a conjugated large π bond structure, which is easier to be modified with other compounds. thereby the surface area and visible light absorption range of carbon nitride-based photocatalytic composites can be insignificantly increased, and interface electron transmission and corresponding photogenerated carriers separation of streams are simultaneously promoted. Therefore, the present study systematically introduced the basic catalytic principles, preparation and modification methods, characterization and calculation simulation of carbon nitride-based photocatalytic composite materials, and their application in wastewater treatment. We also summarized their application in wastewater treatment with the aid of artificial intelligence tools. This review summarized the frontier technology and future development prospects of graphite phase carbon nitride photocatalytic composites, which provide a theoretical reference for wastewater purification.

Degradation of metoprolol from wastewater in a bio-electro-Fenton system

Advanced oxidation processes (AOPs) have been intensely studied for the removal of refractory pollutants because of the strong oxidizing capacity of hydroxyl radical. One of the emerging AOP methods gaining increased attention is bio-electro-Fenton (BEF) which can generate hydroxyl radical in-situ in the cathode chamber using the energy harvested by exoelectrogenic bacteria in the anode. In this study, the feasibility of BEF technology for the removal of metoprolol, a typical micropollutant widely found in the water environment, was for the first time investigated. It was found that applied voltage and working pH had a significant effect on removal efficiency while Fe²⁺ dosage as catalyst showed a little effect. Besides removal by hydroxyl radical, metoprolol might be adsorbed on the surface of the reactor, electrode, and precipitated with iron sludge, especially at neutral pH. In a batch experiment with a supplied voltage of 0.2 V, pH 3, and a Fe²⁺ dose of 0.2 mM, the removal rate of metoprolol in the BEF for the synthetic wastewater and the real effluent from the secondary sediment tank was 66% and 55% within 12 h, respectively. A possible degradation pathway was proposed. Then the removal of metoprolol in a continuous flow BEF system was further studied at different hydraulic retention times (HRTs) of 2, 4, and 6 h, about 77%, 92%, and 95% removal was observed. A toxicity test (less than 20% inhibition on bioluminescence) during treatment and energy cost analysis (5.269 × 10^-3 kWh/order/m³) in treating 10 μg/L of metoprolol containing wastewater effluent at continuous flow mode implied that the proposed BEF has a potential for wastewater treatment.

A critical review on the formation, fate and degradation of the persistent organic pollutant hexachlorocyclohexane in water systems and waste streams

The environmental impacts of persistent organic pollutants (POPs) is an increasingly prominent topic in the scientific community. POPs are stable chemicals that are accumulated in living beings and can act as endocrine disruptors or carcinogens on prolonged exposure. Although efforts have been taken to minimize or ban the use of certain POPs, their use is still widespread due to their importance in several industries. As a result, it is imperative that POPs in the ecosystem are degraded efficiently and safely in order to avoid long-lasting environmental damage. This review focuses on the degradation techniques of hexachlorocyclohexane (HCH), a pollutant that has strong adverse effects on a variety of organisms. Different technologies such as adsorption, bioremediation and advanced oxidation process have been critically analyzed in this study. All 3 techniques have exhibited near complete removal of HCH under ideal conditions, and the median removal efficiency values for adsorption, bioremediation and advanced oxidation process were found to be 80%, 93% and 82% respectively. However, it must be noted that there is no ideal HCH removal technique and the selection of removal method depends on several factors. Furthermore, the fates of HCH in the environment and challenges faced by HCH degradation have also been explained in this study. The future scope for research in this field has also received attention.

A life cycle assessment of solar-based treatments (H2O2, TiO2 photocatalysis, circumneutral photo-Fenton) for the removal of organic micropollutants

Micropollutants have been linked to freshwater and human toxicity. Their occurrence in water bodies arises from different causes, including the discharge of effluents from conventional urban wastewater treatment plants, which are not designed for their removal. The addition of an advanced treatment process for this purpose will allow a toxicity reduction; however, such will also imply further resources and energy use resulting in other environmental impacts. Energy use is a particularly relevant hotspot of the environmental impacts associated with advanced treatments; therefore, solar-based treatments have great potential in this field. The present study assessed the environmental impacts via life cycle assessment (LCA) of five solar-based treatments - solar photolysis (with and without H₂O₂), photocatalysis using TiO₂ (with and without H₂O₂) and circumneutral photo-Fenton - using a pilot-scale compound parabolic collector photoreactor to select the most suitable option for the removal of micropollutants (carbamazepine, diclofenac and sulfamethoxazole; 5 μg/L) from a secondary-treated wastewater. The ranking of solar treatments per highest generated impacts is, overall, as follows: circumneutral photo-Fenton > TiO₂-P25/H₂O₂ > TiO₂-P25 > solar/H₂O₂ > solar. While solar photolysis uses fewer resources and energy, thus generating lower environmental impacts, the common incomplete mineralization of the parent micropollutants implies that toxicity reduction cannot be guaranteed in this case. Aiming for a balance between ecotoxicity reduction and the impacts caused by the application of each technology, the solar TiO₂-P25 treatment, which was here investigated by LCA for the first time to remove organic micropollutants from secondary-treated urban wastewater, appears to be the most suitable option at the studied conditions (and when TiO₂ is reused at least 5 times). One of the environmental downfalls of the assessed treatments is the energy required to produce the chemicals, and so the importance of minimizing external energy use during the application of advanced treatment processes is reinforced.

Environmental Profile Study of Ozone Decolorization of Reactive Dyed Cotton Textiles by Utilizing Life Cycle Assessment

Research approaches on the use of ecotechnologies like ozone assisted processes for the decolorization of textiles are being explored as against the conventional alkaline reductive process for the color stripping of the cotton textiles. The evaluation of these ecotechnologies must be performed to assess the environmental impacts. Partial “gate to gate” Life Cycle Assessment (LCA) was implemented to study the ozone based decolorization process of the reactive dyed cotton textiles. Experiments were performed to determine input and output data flows for decolorization treatment of reactive dyed cotton textile using the ozonation process. The functional unit was defined as “treatment of 40 g of reactive dyed cotton fabric to achieve more than 94% color stripping”. Generic and specific data bases were also used to determine flows, and International Life Cycle Data system (ILCD) method was selected to convert all flows into environmental impacts. The impact category “Water resource depletion” is the highest for all the ozonation processes as it has the greatest relative value after normalization amongst all the impact indicators. Electricity and Oxygen formation were found to be the major contributors to the environmental impacts. New experimental conditions have been studied to optimize the impacts.

Peracetic acid-based advanced oxidation processes for decontamination and disinfection of water: A review

Peracetic acid (PAA) has attracted growing attention as an alternative oxidant and disinfectant in wastewater treatment due to the increased demand to reduce chlorine usage and control disinfection byproducts (DBPs). These applications have stimulated new investigations on PAA-based advanced oxidation processes (AOPs), which can enhance water disinfection and remove micropollutants. The purpose of this review is to conduct a comprehensive analysis of scientific information and experimental data reported in recent years on the applications of PAA-based AOPs for the removal of chemical and microbiological micropollutants from water and wastewater. Various methods of PAA activation, including the supply of external energy and metal/metal-free catalysts, as well as their activation mechanisms are discussed. Then, a review on the usage of PAA-based AOPs for contaminant degradation is given. The degradation mechanisms of organic compounds and the influence of the controlling parameters of PAA-based treatment systems are summarized and discussed. Concurrently, the application of PAA-based AOPs for water disinfection and the related mechanisms of microorganism inactivation are also reviewed. Since combining UV light with PAA is the most commonly investigated PAA-based AOP for simultaneous pathogen inactivation and micropollutant oxidation, we have also focused on PAA microbial inactivation kinetics, together with the effects of key experimental parameters on the process. Moreover, we have discussed the advantages and disadvantages of UV/PAA as an AOP against the well-known and established UV/H₂O₂. Finally, the knowledge gaps, challenges, and new opportunities for research in this field are discussed. This critical review will facilitate an in-depth understanding of the PAA-based AOPs for water and wastewater treatment and provide useful perspectives for future research and development for PAA-based technologies.

The 'thanato-resistome' - The funeral industry as a potential reservoir of antibiotic resistance: Early insights and perspectives

The funeral industry is a potential reservoir of antibiotic resistance. The occurrence, human exposure and health risks of antibiotic resistance in the funeral industry were examined. The funeral industry harbours antibiotic resistance to multiple common and last-resort antibiotics, hence constitutes the 'thanato-resistome'. Hydrological processes, air-borne particulates and vectors disseminate antibiotic resistance, while horizontal gene transfer circulates antibiotic resistance among resistomes, forming a complex network. Ingestion, inhalation of air-borne particulates, dermal intake and clothes of workers contribute to human exposure. Human health risks include; development of drug resistance in previously susceptible pathogens, and increased morbidity and mortality caused by increased pathogenicity and outbreaks of multi-drug resistant infections. Ecological risks include the proliferation of resistant organisms at the expense of susceptible ones, thereby disrupting ecosystem structure and function, including biogeochemical cycles. Barring inferential data, quantitative evidence linking antibiotic resistance to human infections is weak. This reflects the lack of systematic quantitative studies, rather than the absence of such health risks. Quantitative risk assessment is constrained by lack of quantitative data on antibiotic resistance in various reservoirs and exposure routes. A framework for risk assessment and mitigation is proposed. Finally, ten hypotheses and emerging tools such as genomics, in silico techniques and big data analytics are highlighted.

A Pilot Study Combining Ultrafiltration with Ozonation for the Treatment of Secondary Urban Wastewater: Organic Micropollutants, Microbial Load and Biological Effects

Ozonation followed by ultrafiltration (O3 + UF) was employed at pilot scale for the treatment of secondary urban wastewater, envisaging its safe reuse for crop irrigation. Chemical contaminants of emerging concern (CECs) and priority substances (PSs), microbial load, estrogenic activity, cell viability and cellular metabolic activity were measured before and immediately after O3 + UF treatment. The microbial load was also evaluated after one-week storage of the treated water to assess potential bacteria regrowth. Among the organic micropollutants detected, only citalopram and isoproturon were not removed below the limit of quantification. The treatment was also effective in the reduction in the bacterial loads considering current legislation in water quality for irrigation (i.e., in terms of enterobacteria and nematode eggs). However, after seven days of storage, total heterotrophs regrew to levels close to the initial, with the concomitant increase in the genes 16S rRNA and intI1. The assessment of biological effects revealed similar water quality before and after treatment, meaning that O3 + UF did not produce detectable toxic by-products. Thus, the findings of this study indicate that the wastewater treated with this technology comply with the water quality standards for irrigation, even when stored up to one week, although improvements must be made to minimise microbial overgrowth.

Wastewater treatment, reuse, and disposal-associated effects on environment and health

This paper presents the review of the literature published in the year 2019 related to treatment and reuse of wastewater and effects on the environment and human health. The scientific review on the treatment and reuse of wastewaters is divided into various sections in the paper. The review sections cover wastewater management, reuse, removal of microorganisms, and chemical constituents. Besides, the review also covers research focused on wastewater treatment plants, disposal, and the management of wastewater sludge as well as biosolids in the environment. PRACTITIONER POINTS: This paper highlights the review of scientific literature published in the year 2019.Review provide issues related to health risks associated with human and the general environment on the reuse of wastewater, treatment as well as disposal.The literature review covers selected papers relevant to the topic.

Degradation of Acid Orange 7 Azo Dye in Aqueous Solution by a Catalytic-Assisted, Non-Thermal Plasma Process

The aim of this work was the optimization of the performance of the cold plasma technology coupled with a structured catalyst for the discoloration and mineralization of “acid orange 7” (AO7) azo dye. The structured catalyst consists of Fe2O3 immobilized on glass spheres, and it was prepared by the “dip coating” method and characterized by different chemico-physical techniques. The experiments were carried out in a dielectric barrier discharge (DBD) reactor. Thanks to the presence of the catalytic packed material, the complete discoloration and mineralization of the dye was achieved with voltage equal to 12 kV, lower than those generally used with this technology (approximately 20–40 kV). The best result in terms of discoloration and mineralization (80% after only 5 min both for discoloration and mineralization) was obtained with 0.25 wt% of Fe2O3 immobilized on the glass spheres, without formation of reaction by-products, as shown by the HPLC analysis. The optimized catalyst was reused for several reuse cycles without any substantial decrease of performances. Moreover, tests with radical scavengers evidenced that the most responsible oxidizing species for the degradation of AO7 dye was O2•−.

Critical Perspective on Advanced Treatment Processes for Water and Wastewater: AOPs, ARPs, and AORPs

Emerging contaminants’ presence in water, wastewater, and aquatic environments has been widely reported. Their environmental and health-related effects, and the increasing tendency towards wastewater reuse require technology that could remove to a greater degree, or even mineralize, all these contaminants. Currently, the most commonly used process technologies for their removal are advanced oxidation processes (AOPs); however, recent advances have highlighted other advanced treatment processes (ATPs) as possible alternatives, such as advanced reduction processes (ARPs) and advanced oxidation-reduction processes (AORPs). Although they are not yet widely diffused, they may remove contaminants that are not readily treatable by AOPs, or offer better performance than the former. This paper presents an overview of some of the most common or promising ATPs for the removal of contaminants from water and wastewater, and their application, with discussion of their limitations and merits. Issues about technologies’ costs and future perspectives in the water sector are discussed.

Tertiary treatment (Chlorella sp.) of a mixed effluent from two secondary treatments (immobilized recombinant P. pastori and rPOXA 1B concentrate) of coloured laboratory wastewater (CLWW)

Industrial development has increased wastewater (WW) volume; generating contamination and disturbing ecosystems, because of breeching disposal parameters. In this work, Coloured Laboratory Wastewater (CLWW), (1500.00 colour units, CU) was separately submitted to two secondary treatments. For the first one CLWW was treated for three cycles C1, C2 and C3 with P. pastoris X33/pGAPZαA-LaccPost-Stop producing rPOXA 1B laccase, immobilized in calcium alginate beads. For the second-one, rPOXA 1B enzyme concentrate was used (three processes: P1, P2, and P3). Both treatments were carried out in a 15 L reactor with 10 L effective work volume (EWV) with 72 h hydraulic retention time. C1, C2, and C3 effluents were flocculated and filtered through quartzite sand, while P1, P2, and P3 effluents were only filtered through quartzite sand. The mixture of secondary effluents was submitted to a tertiary treatment with Chlorella sp. For C1, C2, C3, P1, P2, and P3, CU removal was of 99.16, 99.58, 99.53, 96.72, 97.05 and 96.47%, respectively. Discharge parameters, total organic carbon (TOC), inorganic carbon (IC), chemical oxygen demand (COD) and biological oxygen demand (BOD₅) decreased, although they reached different final values. After the tertiary treatment (144 h) effluent discharge parameters were reduced to 34 ± 4 CU, TOC to 6.6 ± 0.9 mg L^-1 and COD to 155 ± 4 mg L^-1. It was demonstrated that secondary treatments (immobilized recombined cells or recombinant enzyme concentrate) combined with Chlorella sp., (tertiary treatment) attained a considerable removal of discharge parameters, demonstrating a promissory alternative for CLWW sequential treatment.

Enhanced Activation of Persulfate by Co-Doped Bismuth Ferrite Nanocomposites for Degradation of Levofloxacin Under Visible Light Irradiation

In this study, magnetic visible light driven photocatalysts (bismuth ferrite, Bi₂Fe₄O₉, BFO and Co-doped bismuth ferrite, Co-BFO) were successfully prepared by the facile hydrothermal method. The catalyst was used in the application of heterogeneous persulfate (PS) system under visible LED light irradiation for the degradation of levofloxacin (LFX), proving to be an excellent photocatalyst when evaluated by various characterization methods. The effect of Co-doping in the BFO structure was investigated that the decrease of band gap width and the generated photoelectrons and holes would effectively reduce the recombination of photogenerated electron-hole pairs, leading to the enhancement photocatalytic activity. The results demonstrated that Co-BFO catalyst had a high photodegradation efficiency over a wide pH range of 3.0-9.0 and the Co-BFO-2 composite displayed the optimal catalytic performance. It was found that the degradation rate of LFX by Co-BFO-2 catalyst was 3.52 times higher than that of pure BFO catalyst under visible light condition. The free radical trapping experiments and EPR tests demonstrated that superoxide, photogenerated holes and sulfate radicals were the main active species in the photocatalytic degradation of LFX. And a possible photocatalytic degradation mechanism of LFX was proposed in the Vis/Co-BFO/PS process. These findings provided new insight of the mechanism of heterogeneous activation of persulfate by Co-BFO under visible light irradiation.