Formation of persistent free radicals in biochar derived from rice straw based on a detailed analysis of pyrolysis kinetics

Synergistic effects (adsorption and biodegradation) of Streptomyces hydrogenans immobilization on nano-reed biochar for further application in upflow anaerobic sludge blanket

Water pollution due to wastewater is a serious issue that needs to be studied as many organic compounds are released from wastewater, affecting the ecosystem. Therefore, appropriate treatment methods should be used to prevent these effects. Phragmites australis biochar immobilized with bacteria was prepared in this study for use as an adsorbent in a pilot-scale up-flow anaerobic sludge blanket (UASB) to remove organic matter from wastewater in a buffalo farm. Combining reed biochar and immobilized Streptomyces hydrogenans introduces a synergistic effect: reed biochar serves as a substrate for microbial colonization and provides a conducive environment for microbial growth while Streptomyces hydrogenans, immobilized on the biochar, enhances the degradation of organic matter through its metabolic activities. Suitable techniques were employed, including infrared spectroscopy (FTIR) to determine the functional groups before and after adsorption, scanning electron microscopy (SEM) to determine the morphology of the composite before and after adsorption, X-ray diffraction (XRD) to examine the mineralogical changes through reflectometry, high-resolution diffraction and Brunauer-Emmett-Teller (BET) analyses to determine the surface area that always carried out by nitrogen adsorption/desorption technique based on the BET isotherm. Two-level factorial design experiments optimized using biochar, immobilized with bacteria, were employed to enhance the UASB performance. Chemical oxygen demand (COD) removal and biogas production were studied as a function of four experimental parameters: biochar dose, buffalo sludge dose, pH, and bacteria type. The buffalo sludge (manure) dose negatively affected the model's performance. The results showed better COD removal with Streptomyces hydrogenans S11 inoculation. The optimum biochar dose, buffalo sludge dose, and pH were 20 g L-1, 0%, and 7.5, respectively. The COD removal efficiency under these experimental conditions reached 92.70% with a biogas production of 5.0 mL. The experimental results of a validated point from the model were 90.80% for COD removal ratio and 4.80 mL for biogas production at 2 g L-1 biochar dose, 0% buffalo sludge dose, and pH 7.5 using Streptomyces hydrogenans S11 bacteria. A buffalo wastewater (BWW) anaerobic digestion experimental model was best fitted to the data under optimal conditions. This study aligns with the United Nations Sustainable Development Goals (SDGs), specifically SDG 6 (clean water and sanitation) and SDG 12 (responsible consumption and production). The implications of our work extend to large-scale applications, promising a greener and more sustainable future for wastewater treatment.

Emerging contaminants: A One Health perspective

Environmental pollution is escalating due to rapid global development that often prioritizes human needs over planetary health. Despite global efforts to mitigate legacy pollutants, the continuous introduction of new substances remains a major threat to both people and the planet. In response, global initiatives are focusing on risk assessment and regulation of emerging contaminants, as demonstrated by the ongoing efforts to establish the UN's Intergovernmental Science-Policy Panel on Chemicals, Waste, and Pollution Prevention. This review identifies the sources and impacts of emerging contaminants on planetary health, emphasizing the importance of adopting a One Health approach. Strategies for monitoring and addressing these pollutants are discussed, underscoring the need for robust and socially equitable environmental policies at both regional and international levels. Urgent actions are needed to transition toward sustainable pollution management practices to safeguard our planet for future generations.

Pyrolysis of exhausted biochar sorbent: Fates of cadmium and generation of products

Biochar is a promising sorbent for Cd removal from water, while the disposal of the exhausted Cd-enriched biochar remains a challenge. In this study, pyrolysis was employed to treat the exhausted biochar under N2 and CO2 atmospheres at 600-900 °C, and the fate of Cd during pyrolysis and characteristics of high-valued products were determined. The results indicated that higher temperature and CO2 atmosphere favored the volatilization of Cd. Based on the toxicity characteristic leaching procedure (TCLP) results, the pyrolysis treatment under both atmospheres enhanced the stability of Cd, and the leached Cd concentration of regenerated biochar obtained at high temperatures (>800 °C) was lower than 1 mg/L. Compared with the pristine biochar, the regenerated biochar demonstrated higher carbon content and pH, whereas the contents of oxygen and hydrogen declined, and exhibited promising sorption properties (35.79 mg/g). The atmosphere played an important role in modifying biochar properties and syngas composition. The N2 atmosphere facilitated CH4 production, whereas the CO2 atmosphere increased the proportion of CO. These results implied that pyrolysis can be a valuable and environmental-friendly strategy for the treatment and reuse of exhausted biochar sorbent.

Bismuth oxymetallate-modified biochar derived from Euryale ferox husk for efficient removal of Congo red from wastewater: adsorption behavior and mechanisms

Using Euryale ferox husk as raw material, pristine biochar (EBC), Bi2MoO6-modified biochar (BM-EBC), and BiFeO3-modified biochar (BF-EBC) were prepared and employed for decontaminating Congo red (CR) from wastewater. Compared with EBC (217.59 mg/g) and BF-EBC (359.49 mg/g), a superior adsorption capacity of 460.77 mg/g was achieved by BM-EBC. Based on the evaluation results of the Freundlich and pseudo-second-order models, multilayer chemisorption was suggested as the adsorption mechanism. The adsorption process of BM-EBC was spontaneous and endothermic, and the rate-limiting step pertained to liquid film diffusion and intraparticle diffusion. The underlying removal mechanism was explored via SEM, BET, FTIR, XPS, Raman spectra, and Zeta potential analyses. The introduction of bismuth oxymetallates with their high number of M-O (M: Bi, Mo, Fe) structural elements provided the adsorbent with enlarged surface areas and reinforced oxygen functional groups, thereby promoting pore filling, π-π interactions, hydrogen bonding, and complexation, leading to enhanced adsorption capacity. These results demonstrate that Euryale ferox husk biochar modified by bismuth oxymetallates has high prospects for valorizing biomass waste and removing CR from wastewater.

Biochar-Derived Persistent Free Radicals: A Plethora of Environmental Applications in a Light and Shadows Scenario

Biochar (BC) is a carbonaceous material obtained by pyrolysis at 200-1000 °C in the limited presence of O2 from different vegetable and animal biomass feedstocks. BC has demonstrated great potential, mainly in environmental applications, due to its high sorption ability and persistent free radicals (PFRs) content. These characteristics enable BC to carry out the direct and PFRs-mediated removal/degradation of environmental organic and inorganic contaminants. The types of PFRs that are possibly present in BC depend mainly on the pyrolysis temperature and the kind of pristine biomass. Since they can also cause ecological and human damage, a systematic evaluation of the environmental behavior, risks, or management techniques of BC-derived PFRs is urgent. PFRs generally consist of a mixture of carbon- and oxygen-centered radicals and of oxygenated carbon-centered radicals, depending on the pyrolytic conditions. Here, to promote the more productive and beneficial use of BC and the related PFRs and to stimulate further studies to make them environmentally safer and less hazardous to humans, we have first reviewed the most common methods used to produce BC, its main environmental applications, and the primary mechanisms by which BC remove xenobiotics, as well as the reported mechanisms for PFR formation in BC. Secondly, we have discussed the environmental migration and transformation of PFRs; we have reported the main PFR-mediated application of BC to degrade inorganic and organic pollutants, the potential correlated environmental risks, and the possible strategies to limit them.

Mechanisms of adsorption and functionalization of biochar for pesticides: A review

Agricultural production relies heavily on pesticides. However, factors like inefficient application, pesticide resistance, and environmental conditions reduce their effective utilization in agriculture. Subsequently, pesticides transfer into the soil, adversely affecting its physicochemical properties, microbial populations, and enzyme activities. Different pesticides interacting can lead to combined toxicity, posing risks to non-target organisms, biodiversity, and organism-environment interactions. Pesticide exposure may cause both acute and chronic effects on human health. Biochar, with its high specific surface area and porosity, offers numerous adsorption sites. Its stability, eco-friendliness, and superior adsorption capabilities render it an excellent choice. As a versatile material, biochar finds use in agriculture, environmental management, industry, energy, and medicine. Added to soil, biochar helps absorb or degrade pesticides in contaminated areas, enhancing soil microbial activity. Current research primarily focuses on biochar produced via direct pyrolysis for pesticide adsorption. Studies on functionalized biochar for this purpose are relatively scarce. This review examines biochar's pesticide absorption properties, its characteristics, formation mechanisms, environmental impact, and delves into adsorption mechanisms, functionalization methods, and their prospects and limitations.

Differential photodegradation processes of adsorbed polychlorinated biphenyls on biochar colloids with various pyrolysis temperatures

Despite the crucial role of photodegradation in the environmental transformation of organic pollutants, the photodegradation process of organic pollutants irreversibly absorbed on biochar colloids (BCCs) remains poorly understood. This study investigated the photodegradation processes and mechanisms of 2,4,4'-trichlorobiphenyl (PCB28) adsorbed on BCCs released from bulk biochars derived from bamboo chips at pyrolysis temperatures of 300, 500, and 700 °C. Results show that BCCs-adsorbed PCB28 could be degraded under simulated solar illumination (95-105 mW·cm-2) but at decreased photodegradation rates compared to the dissolved PCB28. The inhibition effect of BCCs on the PCB28 photodegradation increased with increasing pyrolysis temperature. After adsorptive binding to BCCs, the half-life of PCB28 (0.1 mg/L) was prolonged from 2.65 h for the dissolved PCB28 alone in deionized water to 7.48, 40.67, and 81.82 h in the presence of BCC300, BCC500, and BCC700 (5.0 mg/L), respectively. Mechanistically, the photodegradation of adsorbed pollutants was regulated by the photogenerated free radicals and surface functional groups of the low-temperature BCCs, as well as the defects and direct electron transfer capabilities of the high-temperature BCCs; PCB28 adsorbed on the low-temperature BCCs accepted electrons from persistent free radicals under light illumination, which led to PCB28 dechlorination, followed by ring-opening oxidation through hydroxyl radical attack, ultimately resulting in progressive mineralization; singlet oxygen caused preferential ring opening of adsorbed PCB28 on the high-temperature BCCs, preceding dechlorination. The photodegradation of BCCs-adsorbed PCB28 remained significant though more or less being inhibited under the effects of water pH, ionic strength, dissolved organic matters (humic acid and fulvic acid), and in natural water samples. These findings contribute to a better understanding of the structural properties of BCCs that impact phototransformation processes of adsorbed pollutants and facilitate an accurate assessment of the environmental risk associated with biochar application.

Persistent free radicals on biochar for its catalytic capability: A review

Biochar is an economical carbon material for water pollution control, which shows great promise to be applied in the up-scale wastewater remediation processes. Previous studies demonstrate that persistent free radicals (PFRs) on biochar are critical to its reactivity for wastewater remediation. A series of studies have revealed the important roles of PFRs when biochar was applied for organic pollutants degradation as well as the removal of Cr (VI) and As (III) from wastewater. Therefore, this review comprehensively concludes the significance of PFRs for the catalytic capabilities of biochar in advanced oxidation processes (AOPs)-driven organic pollutant removal, and applied in redox processes for Cr (VI) and As (III) remediation. In addition, the mechanisms for PFRs formation during biochar synthesis are discussed. The detection methods are reviewed for the quantification of PFRs on biochar. Future research directions were also proposed on underpinning the knowledge base to forward the applications of biochar in practical real wastewater treatment.

Magnetic biochar enhanced copper immobilization in agricultural lands: Insights from adsorption precipitation and redox

Biochar has exceeded expectations for heavy metal immobilization and has been prepared from widely available sources and inexpensive materials. In this research, coconut shell biochar (CSB), bamboo biochar (BC), magnetic coconut shell charcoal (MCSB), and magnetic bamboo biochar (MBC) were manufactured via co-pyrolysis, and their adsorption properties were tested. The pseudo-secondary (R2 = 0.980-0.985) adsorption kinetic fittings for the four biochas were superior to the pseudo-primary kinetics (R2 = 0.969-0.982). Unmodified biochar adsorption isotherms were more consistent with the Freundlich model, while magnetic biochar fitted Langmuir models better. The maximum adsorption capacity of MCSB for Cu(Ⅱ) reached 371.50 mg g-1. The adsorption mechanisms quantitatively analysis of the biochar indicated that chemical precipitation and ion exchange contributed to the adsorption, in which the magnetic biochar metal-π complexation also enhanced the adsorption. The pot experiment revealed that MCSB (2.0 %DW) significantly enhanced the biomass of lettuce, and facilitated the immobilization of DTPA-Cu (p < 0.05). SEM-EDS, XPS, and FTIR were utilized for morphological characterization and functional group identification, and the increased active adsorption sites (-OH, -COOH, CO, and Fe-O) of MCSB enhanced chemisorption and π-π EDA complexation with Cu(Ⅱ). EEM-PARAFAC and RDA analysis further elucidated that magnetic biochar immobilized copper and reduced biotoxicity (efficiency: 76.12%) by adjusting soil pH, phosphate, and SOM release (negative correlation). The presence of iron oxides (FeOx) promoted in situ adsorption of metallic copper and offered new insights into soil remediation.

Enhanced adsorption of aromatic VOCs on hydrophobic porous biochar produced via microwave rapid pyrolysis

To customize biochar suitable for efficient adsorption of benzene derivatives, this study presents programmed microwave pyrolysis to produce hydrophobic porous biochar with low-dose ferric chloride. Designated control of the ramping rates in the carbonization stage and the temperatures in the activation stage were conducive to enlarging the specific surface area. Iron species, including amorphous iron minerals, could create small-scale hotspots during microwave pyrolysis to promote microporous structure development. Compared with conventional pyrolysis, programmed microwave pyrolysis could increase the specific surface area from 288.6 m2 g-1 to 455.9 m2 g-1 with a short heating time (15 min vs. 2 h) under 650 °C. Engineered biochar exhibited higher adsorption capacity for benzene and toluene (136.6 and 94.6 mg g-1), and lower adsorption capacity for water vapour (6.2 mg g-1). These findings provide an innovative design of engineered biochar for the adsorption of volatile organic compounds in the environment.

Persistent free radicals generated from a range of biochars and their physiological effects on wheat seedlings

Biochar is a promising soil conditioner and environmental remediation material. However, the amount, type, and environmental effect and risk of persistent free radicals (PFRs) associated with biochar need to be better understood. Thus, this study characterized PFRs in a range of biochar types and their effects on the growth and oxidative stress of wheat seedlings. Among the biochars prepared by pyrolysis of different types of biomass at 500 °C, the concentrations of PFRs in cow dung and egg shell biochar were the highest and the lowest, respectively. They both increased with artificial weathering treatment but decreased with aging. The dominant types of biochar PFRs were transformed from carbon-centered to oxygen and carbon/oxygen-centered free radicals with weathering. The amount and type of biochar PFRs in mixtures of biochar and soil varied with soil type and biochar dose. After 30 d incubation in different soil-biochar mixtures, measures of wheat plant germination and growth and antioxidant enzyme activity showed increases at lower biochar doses but decreases at higher doses. Catalase activity was 38.1 % greater at 20 g·kg-1 biochar dosage and 25.2 % less at 80 g·kg-1 dosage, on average. In contrast, leaf malondialdehyde content and staining by Evans Blue, both indicators of plant cell membrane damage, generally increased with increasing biochar dosages. Finally, soil hydrolase enzyme activity also displayed an inverted U-shaped dose response. The toxicity indicators showed an increasing trend with higher PFR concentrations in the soil-biochar combinations. While these findings provide evidence for significant potential agricultural and ecological risks associated with the application of biochar due to PFRs damage, it also points to ways that these risks could be mediated such as through biochar dosage restrictions and pre-aging. This study provides new insights into the potential toxicological mechanism and ecological risks associated with the application of biochar in agricultural and environmental settings.

Removal of Hexamethyldisiloxane via a Novel Hydrophobic (3-Aminopropyl)Trimethoxysilane-Modified Activated Porous Carbon

Volatile methyl siloxanes (VMS) must be removed because the formation of silica in the combustion process seriously affects the resource utilization of biogas. Herein, a series of APTMS ((3-aminopropyl)trimethoxysilane)-modified activated porous carbon (APC) adsorbents (named APTMS@APC) were prepared for VMS efficient removal. The as-prepared adsorbents were characterized using SEM, FTIR, Raman, X-ray diffraction analyses, and N2 adsorption/desorption. The results showed that the surface modification with APTMS enhanced the hydrophobicity of APC with the water contact angle increasing from 74.3° (hydrophilic) to 127.1° (hydrophobic), and meanwhile improved its texture properties with the SBET increasing from 981 to 1274 m2 g-1. The maximum breakthrough adsorption capacity of APTMS@APC for hexamethyldisiloxane (L2, model pollutant) was 360.1 mg g-1. Effects of an inlet L2 concentration (31.04-83.82 mg L-1) and a bed temperature (0-50 °C) on the removal of L2 were investigated. Meanwhile, after five adsorption-desorption cycles, the APTMS@APC demonstrated a superior cycling performance. This indicated that the hydrophobic APTMS@APC has a great significance to remove VMS.

Applications, impacts, and management of biochar persistent free radicals: A review

Biochar is a promising environmental contaminant remediation agent because of its adsorptive and catalytic properties. However, the environmental effects of persistent free radicals (PFRs) produced by biomass pyrolysis (biochar production) are still poorly understood, though they have received increasing research attention in recent years. Although PFRs both directly and indirectly mediate biochar's removal of environmental pollutants, they also have the potential to cause ecological damage. In order to support and sustain biochar applications, effective strategies are needed to control the negative effects of biochar PFRs. Yet, there has been no systematic evaluation of the environmental behavior, risks, or management techniques of biochar PFRs. Thus, this review: 1) outlines the formation mechanisms and types of biochar PFRs, 2) evaluates their environmental applications and potential risks, 3) summarizes their environmental migration and transformation, and 4) explores effective management strategies for biochar PFRs during both production and application phases. Finally, future research directions are recommended.

Distribution of environmentally persistent free radicals in size-segregated PMs emitted from residential biomass fuel combustion

Environmentally persistent free radicals (EPFRs) are considered as an emerging pollutant due to their potential environmental risks, but the distribution characteristics of particulate matters (PMs)-EPFRs from residential combustion source are poorly understood. In this study, biomass (corn straw, rice straw, pine and jujube wood) combustion was studied in lab-controlled experiments. More than 80% of PM-EPFRs were distributed in PMs with aerodynamic diameter (d_ae) ≤ 2.1 µm, and their concentration in fine PMs was about 10 times that in coarse PM (2.1 µm ≤ d_ae ≤ 10 µm). The detected EPFRs were carbon-centered free radicals adjacent to oxygen atoms or a mixture of oxygen- and carbon-centered radicals. The concentrations of EPFRs in coarse and fine PMs were positively correlated with char-EC, but the EPFRs in fine PMs exhibited a negative correlation with soot-EC (p < 0.05). The increase of PM-EPFRs signals with the increased dilution ratio during pine wood combustion was more significant than that from rice straw, which may be resulted from the interactions between the condensable volatiles and the transition metals. Our study provides useful information for better understanding the formation of combustion-derived PM-EPFRs, and will be instructive for its purposeful emissions control.

Ecotoxicological characterization of engineered biochars produced from different feedstock and temperatures

Biochar (BC) engineering, which has recently gained a lot of interest, allows designing the functional materials. BC modification improves the properties of pristine biochar, especially in terms of adsorption parameters. An interesting type of modification is the introduction of metals into the BC's structure. There is a knowledge gap regarding the effects of modified BC (e.g., BC-Mg, BC-Zn) on organisms. The aim of this study was the ecotoxicological evaluation of BC-Mg and BC-Zn composites, received under diverse conditions from willow or sewage sludge at 500 or 700 °C. The ecotoxicological tests with bacteria Vibrio fischeri (V. fischeri) and invertebrates Folsomia candida (F. candida) were applied to determine the toxicity of BC. The content of toxic substances (e.g., polycyclic aromatic hydrocarbons (PAHs), heavy metals (HMs), environmentally persistent free radicals (EPFRs)) in BC were also determined and compared with ecotoxicological parameters. The ecotoxicity of studied BCs depends on many variables: feedstock type, pyrolysis temperature and the modification type. The Zn and Mg modification reduced (from 28 to 63 %) the total Ʃ16 PAHs content in willow-derived BCs while in SL-derived BCs the total Ʃ16 PAHs content was even 1.5-3 times higher compared to pristine BCs. The Zn modified willow-derived BCs affected positively on F. candida reproduction but showed inhibition of luminescence V. fischeri. BC-Mg exhibited harmful effect to F. candida. The ecotoxicological assessment carried out sheds light on the potential toxicity of BC-Zn and BC-Mg composites, which are widely used in the removal of heavy metals, pharmaceuticals, dyes from waters and soils.

Effects of biochar on anaerobic treatment systems: Some perspectives

Many anaerobic activities involve carbon, nitrogen, iron, and sulfur cycles. As a well-developed porous material with abundant functional groups, pyrolytic biochar has been widely researched in efforts to promote microbial activities. However, the lack of consensus on the biochar mechanism has limited its practical application. This review summarizes the effects of different pyrolysis temperatures, particle sizes, and dosages of biochar on microbial activities and community in Fe(III) reduction, anaerobic digestion, nitrogen removal, and sulfate reduction systems. It was found that biochar could promote anaerobic activities by stimulating electron transfer, alleviating toxicity, and providing suitable habitats for microbes. However, it inhibits microbial activities by releasing heavy metal ions or persistent free radicals and adsorbing signaling molecules. Finding a balance between the promotion and inhibition of biochar is therefore essential. This review provides valuable perspectives on how to achieve efficient and stable use of biochar in anaerobic systems.

A critical review on biochar-assisted free radicals mediated redox reactions influencing transformation of potentially toxic metals: Occurrence, formation, and environmental applications

Potentially toxic metals have become a viable threat to the ecosystem due to their carcinogenic nature. Biochar has gained substantial interest due to its redox-mediated processes and redox-active metals. Biochar has the capacity to directly adsorb the pollutants from contaminated environments through several mechanisms such as coprecipitation, complexation, ion exchange, and electrostatic interaction. Biochar's electron-mediating potential may be influenced by the cyclic transition of surface moieties and conjugated carbon structures. Thus, pyrolysis configuration, biomass material, retention time, oxygen flow, and heating time also affect biochar's redox properties. Generally, reactive oxygen species (ROS) exist as free radicals (FRs) in radical and non-radical forms, i.e., hydroxyl radical, superoxide, nitric oxide, hydrogen peroxide, and singlet oxygen. Heavy metals are involved in the production of FRs during redox-mediated reactions, which may contribute to ROS formation. This review aims to critically evaluate the redox-mediated characteristics of biochar produced from various biomass feedstocks under different pyrolysis conditions. In addition, we assessed the impact of biochar-assisted FRs redox-mediated processes on heavy metal immobilization and mobility. We also revealed new insights into the function of FRs in biochar and its potential uses for environment-friendly remediation and reducing the dependency on fossil-based materials, utilizing local residual biomass as a raw material in terms of sustainability.

N Doped Activated Biochar from Pyrolyzing Wood Powder for Prompt BPA Removal via Peroxymonosulfate Activation

In the present study, nitrogen doped biochar (N-PPB) and nitrogen doped activated biochar (AN-PPB) were prepared and used for removing bisphenol A (BPA) in water through activating peroxymonosulfate. It was found from the results that N-PPB exhibited superior catalytic performance over pristine biochar since nitrogen could brought about abundant active sites to the biochar structure. The non-radical singlet oxygen (1O2) was determined to be the dominant active species responsible for BPA degradation. Having non-radical pathway in the N-PPB/PMS system, the BPA degradation was barely influenced by many external environmental factors including solution pH value, temperature, foreign organic, and inorganic matters. Furthermore, AN-PPB had richer porosity than N-PPB, which showed even faster BPA removal efficiency than N-PPB through an adsorptive/catalytic synergy. The finding of this study introduces a novel way of designing hieratical structured biochar catalysts for effective organic pollutant removal in water.

Generation Mechanism of Persistent Free Radicals in Lignocellulose-Derived Biochar: Roles of Reducible Carbonyls

Persistent free radicals (PFRs) in biochar can influence biochar reactivity, promoting organic contaminant degradation or even causing certain toxic impacts. However, the PFR generation mechanism is not still well understood. An investigation of the relationship between PFR formation and the chemical structure of biochar is essential for understanding the PFR formation mechanism. Our in situ measurement results showed that PFR intensities increased from 0-509.5 to 146-5678 a.u. after being pyrolyzed at 300 °C for 60 min. The significant positive correlation between PFR intensities and the peak areas of C═O and aromatic C═C groups indicated that the generation of PFRs was highly dependent on the C═O and aromatic C═C structures. The reduction of biochars by KBH₄ resulted in a 32.2 ± 2.49% decrease in the C═O content and a relative increase in the C-O content, while other physicochemical properties did not change. Thus, the observed 49.3% decrease in PFR signals after this reduction suggested that the reducible C═O groups, possibly in aldehydes, aromatic ketones, and quinones, were closely associated with PFRs in biochars. This study provides an in situ insight into the PFR generation mechanism and guides the corresponding biochar design and property manipulation.

Investigating Biochar-Derived Dissolved Organic Carbon (DOC) Components Extracted Using a Sequential Extraction Protocol

Biochar-derived dissolved organic carbon (DOC), as the most important component of biochar, can be released on farmland, improving fertility and playing a role in soil amendment and remediation. The complexity of molecular structures and diversity of DOC compounds have influenced these functions to some extent. A sequential extract protocol consisting of water (25 °C), hot water (80 °C), and NaOH solution (0.05 M) was used to fully extract DOC compounds and gain a thorough understanding of the possible DOC components released from biochar. Rape straw (RS), apple tree branches (ATB), and pine sawdust (PS) were pyrolyzed at 300, 500, and 700 °C, respectively, to make nine distinct biochars. A TOC analyser, ultraviolet-visible spectroscopy (UV–vis), and excitation–emission fluorescence (EEM) spectrophotometer were used in conjunction with parallel factor analysis (PARAFAC) to determine the distribution of DOC content, the diversity of aromaticity, molecular weight characteristics and components of biochar-derived DOC. The results show that the relative distribution of water-extractable fractions ranged from 3.21 to 35.57%, with a low-aromaticity and extremely hydrophilic fulvic-acid-like compounds being found in the highest amounts (C2 and C3). The smallest amount of hot water-extractable components was produced from the release of small-molecule aliphatic compounds adsorbed on biochar and susceptible to migration loss once in a soil solution. More than half of the biochar-derived DOC was released in a NaOH solution, which primarily consisted of humic-acid-like compounds (C1), with higher molecular weights, more aromaticity, and lower bioavailability, according to the distribution of DOC in various extractants. In addition, the pyrolysis temperature and biomass type had a significant impact on the DOC properties released by biochar. As a result, the findings of this study showed that using a sequential extract protocol of water, hot water, and NaOH solution in combination with spectroscopic methods could successfully reveal the diversity of biochar-derived components, which could lead to new insights for the accurate assessment of potential environmental impacts and new directions for biochar applications.

Facile Fabrication of Durable Biochar/H2-TiO2 for Highly Efficient Solar-Driven Degradation of Enrofloxacin: Properties, Degradation Pathways, and Mechanism

Widespread application of TiO₂ for degradation of antibiotics is restricted by mainly the low photodegradation efficiency under solar irradiation. To expand the application of TiO₂, the key factors that should be improved are visible-light response, yield of electrons and holes, and durability. Herein, we report a visible-light responsive and durable sugarcane-bagasse-derived biochar supported hydrogenated TiO₂ (HSCB/H₂-TiO₂) photocatalyst with higher electron production fabricated by a facile one-pot hydrogenation. Mild hydrogenation temperature preserved the lotus-stem-like structure of sugarcane bagasse and gave the photocatalyst great separability. The superior durability of HSCB/H₂-TiO₂ was demonstrated by 12 rounds of repeated degradation of methylene blue (MB). In addition, the electron paramagnetic resonance (EPR) results demonstrated that the biochar skeleton contains abundant persistent free radicals (PFRs), which can provide excess electrons to form more ^•O₂ ^-. Meanwhile, radical quenching experiment and EPR radical trapping results also revealed that ^•O₂ ^- was the most dominant species for enrofloxacin (ENR) degradation. Thus, the as-fabricated photocatalyst shows excellent solar-driven degradation of ENR, and 95.6% of ENR was degraded in 180 min under simulated solar irradiation. Possible ENR degradation pathways and mechanism are also proposed based on the identified intermediates.

Real-World Emission Characteristics of Environmentally Persistent Free Radicals in PM2.5 from Residential Solid Fuel Combustion

Environmentally persistent free radicals (EPFRs) can induce reactive oxygen species, causing adverse health impacts, and residential fuel (biomass and coal) combustion is believed to be an important emission source for EPFRs; however, the residential emission characteristics of EPFRs are rarely studied in the real world. Here, we conducted a field campaign evaluating the presence and characteristics of EPFRs generated from residential biomass and coal burning in rural China. The emission factors (EFs) of EPFRs (with units of 10²⁰ spins·kg^-1) in PM_2.5 from the combustion of crop residues (3.97 ± 0.47) were significantly higher than those from firewood (2.06 ± 0.19) and coal (2.13 ± 0.33) (p < 0.05). The EPFRs from residential solid fuel combustion were carbon-centered free radicals adjacent to oxygen atoms. The fuel type was a primary factor controlling EPFR discharge, explaining 68% of the variation in EPFR EFs. The emissions from biomass burning had higher EPFRs per particle than those from coal combustion. EPFRs had stronger relationships with carbonaceous components than with other incomplete combustion products. The EPFRs from biomass burning were mostly generated during the pyrolysis of fuels, while the EPFRs generated from coal combustion were mainly associated with refractory organic compounds. This study provides valuable information for evaluating the fates of EPFRs, promoting a better understanding of the health impacts of air pollution.

Effects of different feedstocks-based biochar on soil remediation: A review

As a promising amendment, biochar has excellent characteristics and can be used as a remediation agent for diverse types of soil pollution. Biochar is mostly made from agricultural wastes, forestry wastes, and biosolids (eg, sewage sludge), but not all the biochar has the same performance in the improvement of soil quality. There is a lack of guidelines devoted to the selection of biochar to be used for different types of soil pollution, and this can undermine the remediation efficiency. To shed light on this sensitive issue, this review focus on the following aspects, (i) how feedstocks affect biochar properties, (ii) the effects of biochar on heavy metals and organic pollutants in soil, and (iii) the impact on greenhouse gas emissions from soil. Generally, the biochars produced from crop residue and woody biomass which are composed of lignin, cellulose, and hemicellulose are more suitable for organic pollution remediation and greenhouse gas emission reduction, while biochar with high ash content are more suitable for cationic organic pollutant and heavy metal pollution (manure and sludge, etc.). Additionally, the effect of biochar on soil microorganisms shows that gram-negative bacteria in soil tend to use WB biochar with high lignin content, while biochar from OW (rich in P, K, Mg, and other nutrients) is more able to promote enzyme activity. Finally, our recommendations on feedstocks selection are presented in the form of a flow diagram, which is precisely intended to be used as a support for decisions on the crucial proportioning conditions to be selected for the preparation of biochar having specific properties and to maximize its efficiency in pollution control.

Persulfate adsorption and activation by carbon structure defects provided new insights into ofloxacin degradation by biochar

Cellulose and lignin derived biochars with significant differences in persistent free radicals (PFRs), oxygen-containing functional groups, and defective structure were prepared to explore the mechanism of biochar mediated persulfate (PS) activation. EPR spin trapping and quenching technique coupled with degradation experiments confirmed that the defective structures could activate PS to generate superoxide anions (O₂^•-), which was converted to singlet oxygen (¹O₂), especially in the acidic condition. ¹O₂ dominated the degradation of ofloxacin (OFL, a fluoroquinolone antibiotic). An improved iodometric measurement was applied for direct quantification of adsorbed PS on biochar. The amounts of adsorbed PS were consistent with the degradation of OFL and the measured electric current during the reaction indicated that PS adsorption was a prerequisite for PS activation, which may be neglected in previous studies. The results of this study highlighted the key roles of defective structure and adsorption of PS on biochar for the activation of PS.

Environmental persistent free radicals in diesel engine exhaust particles at different altitudes and engine speeds

The occurrence of environmental persistent free radicals (EPFRs) in the environment has attracted a great deal of research attention. Although the major sources of EPFRs in the environment is diesel engine exhaust, the study on the emission characteristics of EPFRs at different working conditions is still very limited. An integrated engine system was adopted to simulate different working conditions of various altitudes and engine speeds, and to examine the emission process of a diesel engine. The results suggested that low engine speed and high altitude are generally associated with high PM₁₀ emission with more stable and ordered structures. Based on the analysis of PAHs on solid and gas phases, PM₁₀ generated from diesel engine at altitude higher than 2000 m may contain substantial amounts of PAHs embedded inside particles, but not adsorbed on the surface. EPFRs signal up to 1.66 × 10²⁰ spins/g were detected in PM₁₀ of the diesel exhaust. Higher engine speed and lower altitude were associated with stronger EPR signals on PM₁₀. However, the accumulated EPR signal intensities after consuming 1 L of diesel were higher at lower engine speed and higher altitude, suggesting higher overall risks. A positive correlation between R value (signal strength ratio of D and G peaks on the Raman spectra) and EPFRs intensity indicated that the EPR signals were associated with the defects of carbon structure. EPFRs intensity in particles showed no significant change in dark, and over 70% of the EPR signals survived under UV light in a one-month aging simulation. The strong persistence of these EPFRs suggested their potential long lasting and widespread risks, which should be investigated extensively.

Potential Application of Biochar Composite Derived from Rice Straw and Animal Bones to Improve Plant Growth

The current study is aimed at deriving biochar (BC) from rice straw (RS-BC) and waste bones (WB-BC), being wasted without adequate return at the expense of environmental degradation. The RS and WB feedstocks were pyrolyzed at 550 °C, and the potential of derived biochar as a slow nutrient releasing soil amendment was examined during the growth of ridge gourd. Proximate analysis of the prepared biochars showed significant improvement in ash content and fixed carbon as compared to their raw biomasses. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) analysis of RS-BC and WB-BC displayed a diverse range of functional groups viz. derivatives of cellulose and hydroxylapatite (HA); macro and microporosity; multiple nutrients. Application of RS-BC and WB-BC in potted soil alone and as biochar composite (RS-BC+WB-BC) at 5, 10 and 15% (w/w) and chemical fertilizer (CF) resulted in a significant increase in soil pH, electrical conductivity (ECe), cation exchange capacity (CEC) and water holding capacity (WHC) in exchange for growth and yield of ridge gourd. However, there were insignificant differences in the growth of plants in response to RS-BC, WB-BC alone and CF with biochar composite at 15% amendment. For giving insignificantly different growth results than CF, the prepared biochar composite showed outstanding potential as an organic fertilizer applicable in agrarian soils to elevate soil properties and yield of agricultural commodities.

Evaluating the phytotoxicity of dissolved organic matter derived from black carbon

Dissolved organic matter (DOM) derived from black carbon (BC) can migrate from soil to river by rainfall or snow melting in nature. Because of the incomplete biomass combustion, BC produced at various temperatures is mixed, which is hard to divide the DOM at single temperature. Then it is difficult to explore the properties and risks of DOM in detail. Therefore, corn straws were selected to prepare BC under different heating temperature (200 °C, 250 °C, 300 °C, 350 °C, 400 °C and 450 °C). Germination index combined the excitation-emission matrix-parallel factor (PARAFAC) and two-dimensional correlation spectra was employed to clarify the phytotoxicity and the PARAFAC components of DOM derived from BC at single temperature. Results showed that BC was hard to dissolve in water, but most of its DOM were toxic. Heating temperature promoted the formation of simple and complex fluorescent components. Combined with volume integration, it is the complex peaks of fluorescent components to determine the phytotoxicity of DOM derived from BC. These results would help to build a deep understanding of the fluorescence characteristics and toxicity of BC at different temperatures and emphasize the importance of reducing straw by burning.

Preparation of Eucommia ulmoides lignin-based high-performance biochar containing sulfonic group: Synergistic pyrolysis mechanism and tetracycline hydrochloride adsorption

In this study, the sulfonic group was introduced to prepare high-performance Eucommia ulmoides lignin-based biochar, which was used to remove tetracycline hydrochloride. The BET area (2008 m² g^-1) of sulfonated biochar was twice that of unmodified biochar. Through XRD and Raman analysis, the synergetic pyrolysis mechanism of the sulfonic group in the formation of the porous structure was discussed. Sulfonated biochar had excellent adsorption performance for tetracycline hydrochloride (Q_m: 1163 mg g^-1), while the adsorption performance of unmodified biochar was about only one-fourth (Q_m: 277.7 mg g^-1) of that. The adsorption of tetracycline hydrochloride by the sulfonated biochar was spontaneously endothermic and conformed to the Langmuir isotherm model. The adsorption process was confirmed by pseudo-second-order kinetic model. Moreover, the sulfonic group on the sulfonated biochar significantly promoted the formation of the hydrogen bond and greatly improved the adsorption performance.

An integrated study on the pyrolysis mecanism of peanut shell based on the kinetic analysis and solid/gas characterization

An in-depth understanding of peanut shell pyrolysis reaction is essential for its efficient utilization. Detailed analysis of thermodynamics, kinetics, and reaction products can provide valuable information about pyrolysis reaction. In this work, pyrolytic reaction mechanism was elucidated with the analysis of thermogravimetric-mass spectrometry and the structural characterization of the derived biochar. The thermodynamic and kinetic parameters of three sub-stages were matched well in different model-free methods. The positive ΔH and ΔG values indicated that the pyrolysis reactions for three stages were endothermic and nonspontaneous. The reaction mechanism predicted by integral master-plots were F3 (f(α) = (1-α)³), F1 (f(α) = (1-α), and F3 (f(α) = (1-α)³) for the three sub-stages, respectively. The negative ΔS in the third stage was related to the reduced releasing of low-molecular weight gases and ordered graphite-like carbon structure. This study provides a prospective approach to understand the pyrolysis mechanism of biomass.

Thermodynamics, kinetics and thermal decomposition characteristics of sewage sludge during slow pyrolysis

Pyrolysis has shown great potential for sewage sludge valorisation and management by producing value-added chemicals. Although the product process yields are extensively studied, a few studies exist without consensus on the kinetic properties of sewage sludge pyrolysis. As a result, a study to investigate the thermal decomposition characteristics of Gauteng sewage sludge (GSS) at various heating rates (10, 20, and 30 °C/min), its pyrolysis kinetic parameters, reaction mechanism and thermodynamic properties was meticulously conducted. The results show that sewage sludge decomposition occurs in three stages, whereby the main decomposition (active pyrolysis) takes place at 150-570 °C. Fourier transform infrared spectroscopy (FTIR) analysis results confirm progression of thermal decomposition of GSS and drive off volatile compounds and formation of aromatic structures during TGA studies of GSS. An increase in heating rate shifts the characteristic temperatures towards higher temperatures with the highest decomposition rate of 1.10%/min.mg at 30 °C/min. The activation energies of GSS pyrolysis were calculated using Flynn-Wall-Ozawa, Kissinger-Akahira-Sunose and Starink methods and averaged as 225.92, 218.04 and 218.97 kJ/mol, respectively. GSS pyrolysis involves complex reaction chemistry with high reactivity whereby reactions that follow third order and three-dimensional diffusion-reaction mechanisms dominated the process. However, these mechanisms cannot be used explicitly to define the global pyrolysis kinetics due to the occurrence of multiple simultaneous reactions. The obtained thermodynamic and kinetic data will advance and amplify the design, simulation and optimisation of global energy pyrolysis units for production of value-added chemicals.

Effects of feedstock biopolymer compositions on the physiochemical characteristics of dissolved black carbon from lignocellulose-based biochar

Dissolved black carbon (DBC) is becoming increasingly concerned by researchers due to its unique environmental behavior. However, understanding of the influence mechanism of biopolymer compositions of cellulose (CEL), hemicellulose (HEM) and lignin (LIG) on the formation and physiochemical characteristics of DBC from lignocellulose-based biochar is limited. This study therefore examined the formation of DBCs derived from the biopolymer compositions, corn straw (CS), corncob (CC), bamboo sawdust (BS) and pinewood sawdust (PS) under the heat treatment temperatures (HTTs) of 300-500 °C. Zeta potential and hydrodynamic diameters (D_h) of DBCs produced under 300 °C were further investigated. DBC formation may be closely associated with the HTT-dependent heterogeneities of biopolymer compositions, in which significant effects of CEL and HEM charring on physiochemical properties of DBCs were identified under the HTT of 300 and 400 °C, while the formation of DBCs was closely related to LIG and its proportions in biomass under high HTT (>500 °C). On the rise of the HTT, the carbonaceous structures of biopolymer compositions were reorganized and converted to graphitic structures in biochar accompanied by the large decomposition or carbonization of CEL and HEM, leading to the reduced carbon content, surface functional groups, aromaticity and molecular weight of DBCs, as well as the decrease of protein-like and relative increase of fulvic-like fluorescent substances in most DBCs. LIG in biomass may facilitate the migration of DBCs due to abundant surface negative charges and the formation of low D_h. This study offered new insights into our understanding of influencing mechanisms of biopolymer compositions on the characteristic of DBCs under different HTTs.

Components and Persistent Free Radicals in the Volatiles during Pyrolysis of Lignocellulose Biomass

Persistent free radicals (PFRs) may cause negative impacts to human health and the environment because of the induced reactive oxygen species. We expect that PFRs could be generated in the condensable volatiles formed during lignocellulose biomass pyrolysis. Elucidating the structural origin and the formation mechanism of PFRs is important for an in-depth understanding of air pollutants from the pyrolysis or combustion of lignocellulose biomass. This work selected rice straw and pine sawdust to represent agricultural and forest biomass residues. The pyrolysis mechanism, volatile components, and PFR generation were discussed based on the analysis of thermogravimetry-Fourier transform infrared spectroscopy-mass spectrometry (MS), pyrolysis-gas chromatography/MS, and electron spin resonance (ESR). Levoglucosan, furans, and 2-methoxyphenols were the main pyrolytic compounds for cellulose (CL), hemicellulose (HC), and lignin (LG), respectively. Obvious ESR signals were detected in the condensable volatiles of LG, while no ESR signals were detected for those of CL and HC. Higher ESR signals were detected in lignocellulose with a higher content of LG. Therefore, LG was the main structural basis to generate PFRs in lignocellulose condensable volatiles, mostly attributed to the methoxyphenol components. This study provides useful information regarding the generation mechanisms of and the structures related to PFRs, which is essential to understand the risks of lignocellulose pyrolytic volatiles.