Biocompatible Solid-Phase Microextraction Coatings Based on Polyacrylonitrile and Solid-Phase Extraction Phases

A critical review of bioanalytical and clinical applications of solid phase microextraction

Studying the functions, mechanisms, and effects of drugs and other exogenous compounds on biological systems, together with investigations performed to understand biosystems better, comprises one of the most fascinating areas of research. Although classical sample preparation techniques are dominantly used to infer the relevant information from the investigated system, they fail to meet various imperative requirements, such as being environmentally friendly, applicable in-vivo, and compatible with online analysis. As a chameleon in the analytical toolbox, solid phase microextraction (SPME) is one of the best tools available for studying biological systems in unconventional ways. In this review, SPME is spotlighted, and its capability for bioanalytical applications, including drug analysis, untargeted and targeted metabolomics, in-vivo and clinical studies, is scrutinized based on studies reported in the past five years. In addition, novel extractive phases and instrumental coupling strategies developed to serve bioanalytical research are discussed to give the perspective for state-of-the-art and future developments. The literature assessment showed that SPME could act as a critical tool to investigate in-vivo biological systems and provide information about the elusive portion of the metabolome. Moreover, recently introduced miniaturized SPME probes further improved the low-invasive nature of the sampling and enabled sampling even from a single cell. The coupling of SPME directly to mass spectrometry significantly reduced the total analytical workflow and became one of the promising tools suitable for fast diagnostic purposes and drug analysis. The numerous applications and advancements reported in bioanalysis using SPME show that it will continue to be an indispensable technique in the future.

Flexible filament winding strategy to prepare COF@polyionic liquid-coated fibers for non-selective exclusion of macromolecules in electro-enhanced solid-phase microextraction

BACKGROUND

Accurate quantitative analysis of small molecule metabolites in biological samples is of great significance. Hydroxypolycyclic aromatic hydrocarbons (OH-PAHs) are metabolic derivatives of emerging pollutants, reflecting exposure to polycyclic aromatic hydrocarbons (PAHs). Macromolecules such as proteins and enzymes in biological samples will interfere with the accurate quantification of OH-PAHs, making direct analysis impossible, requiring a series of complex treatments such as enzymatic hydrolysis. Therefore, the development of matrix-compatible fiber coatings that can exclude macromolecules is of great significance to improve the ability of solid-phase microextraction (SPME) technology to selectively quantify small molecules in complex matrices and achieve rapid and direct analysis.

RESULTS

We have developed an innovative coating with a stable macromolecular barrier using electrospinning and flexible filament winding (FW) technologies. This coating, referred to as the hollow fibrous covalent organic framework@polyionic liquid (F-COF@polyILs), demonstrates outstanding conductivity and stability. It accelerates the adsorption equilibrium time (25 min) for polar OH-PAHs through electrically enhanced solid-phase microextraction (EE-SPME) technology. Compared to the powder form, F-COF@polyILs coating displays effective non-selective large-size molecular sieving. Combining gas chromatography-tandem triple quadrupole mass spectrometry (GC-MS/MS), we have established a simple, efficient quantitative analysis method for OH-PAHs with a low detection limit (0.008-0.05 ng L-1), wide linear range (0.02-1000 ng L-1), and good repeatability (1.0%-7.3 %). Experimental results show that the coated fiber exhibits good resistance to matrix interference (2.5%-16.7 %) in complex biological matrices, and has been successfully used for OH-PAHs analysis in human urine and plasma.

SIGNIFICANCE

FW technology realizes the transformation of the traditional powder form of COF in SPME coating to a uniform non-powder coating, giving its ability to exclude large molecules in complex biological matrices. A method for quantitatively detecting OH-PAHs in real biological samples was also developed. Therefore, the filament winding preparation method for F-COF@polyILs coated fibers, along with fibrous COFs' morphology control, has substantial implications for efficiently extracting target compounds from complex matrices.

Proteomic Analysis of Human Saliva via Solid-Phase Microextraction Coupled with Liquid Chromatography-Mass Spectrometry

Proteomics of human saliva samples was achieved for the first time via biocompatible solid-phase microextraction (bio-SPME) devices. Upon introduction of a porogen to a conventional C18 coating, porous C18/polyacrylonitrile (PAN) SPME blades were able to extract peptides up to 3.0 kDa and more peptides than commercial SPME blades. Following Trypsin digestion, salivary proteomic analysis was achieved via SPME-LC-MS/MS. Seven endogenous proteins were consistently identified in all saliva samples via bio-SPME. Taking advantage of this strategy, untargeted peptidomics was applied for the comparison of saliva samples between healthy and SARS-CoV-2 positive individuals. The results showed clear peptidomic differences between the viral and healthy saliva samples. This proof-of-concept study demonstrates the potential of bio-SPME-LC-MS/MS for peptidomics and proteomics in biomedical applications.

Embedding Mixed Sorbents in Binder: Solid-Phase Microextraction Coating with Wide Extraction Coverage and Its Application in Environmental Water Analysis

Solid-phase microextraction (SPME) is a simple and highly effective sample-preparation technique for water analysis. However, the extraction coverage of a given SPME device with a specific coating can be an issue when analyzing multiple environmental contaminants. Therefore, instead of synthesizing one sorbent material with dual or multiple functions, we investigated a new strategy of preparing SPME blades using a homogeneous slurry made by mixing three different sorbent particles─namely, hydrophobic/lipophilic balanced (HLB), HLB-weak cationic exchange (HLB-WCX), and HLB-weak anionic exchange (HLB-WAX)─with a polyacrylonitrile (PAN) binder. The developed coating is matrix compatible, as the binder functions not only as a glue for immobilizing the sorbent particles but also as a porous filter, which only allows small molecules to enter the pores and interact with the particles, thus avoiding contamination from large elements. The results confirmed that the proposed mixed-coating SPME device provides good extraction performance for polar and nonpolar as well as positively and negatively charged compounds. Based on this device, three comprehensive analytical methodologies─high-throughput SPME-LC-MS/MS (for the quantitative analysis of targeted drugs of abuse and artificial sweeteners), in-bottle SPME-LC-high resolution MS (HRMS) (for the untargeted screening of organic contaminants), and on-site drone sampling SPME-LC-HRMS (for on-site sampling and untargeted screening)─were developed for use in environmental water analysis. The resultant data confirm that the proposed strategies enable comprehensive water quality assessment by using a single SPME device.

High throughput and automated solid-phase microextraction and determination by liquid chromatography-mass spectrometry for the analysis of mycotoxins in beer

There is high demand for rapid screening of toxics in food analysis. In this study, a new high-throughput and automated solid-phase microextraction (SPME) system was employed for the sample preparation of mycotoxins in beers. Matrix compatible SPME blades with thin coating layer were used, which significantly decreased the matrix effects in beer samples (≤ 12%). This SPME system allows 96 samples to be processed automatically and simultaneously with average preparation time of 57 s per sample. After sample preparation, the 96-well plate with desorption solution was sealed with a thin film and put into the LC-MS sampler for analysis via positive/negative ESI switching mode. The results also showed good sensitivity (limits of detection between 0.02 and 3 ng/mL) with R²≥ 0.9971, reproducibility (intra- and inter-day ≤ 8% and ≤ 13%, respectively), and accuracy (recoveries between 79% and 121%).

Matrix-Compatible Solid-Phase Microextraction Pin Coupled Directly to Mass Spectrometry using Probe Electrospray Ionization

A solid-phase microextraction (SPME) pin device with a biocompatible coating on the tip was developed for direct coupling to mass spectrometry (MS) via a vertical dipping-and-spray strategy using an automated probe electrospray ionization (PESI) interface. The developed method provides superior sensitivity compared to standard PESI-MS due to the enrichment effects of SPME and the significant increase in the volume of sample and/or solvent collected during dipping due to the SPME pin's notably larger size. The tips of the SPME pins were coated with a biocompatible coating consisting of small sorbent particles embedded into a polyacrylonitrile (PAN) binder. This coating enables the extraction of small molecules, while preventing larger molecules such as tissue fragments, proteins, and cell matter from coming into the sorbent. The developed SPME pin-PESI-MS method also features much lower matrix effects compared to PESI-MS for the analysis of complex biology samples. When applied for the analysis of 8 drugs of abuse in urine samples, the SPME pin-PESI-MS method provided good linearity (R² ≥ 0.9997), high sensitivity with limits of detection between 0.003 to 0.03 ng/mL, and good reproducibility with RSD% ≤ 6%. The vertical design of the SPME-PESI-MS direct-coupling interface allows the potential fully automation of the system using a conventional autosampler.

High-Throughput and Rapid Screening of Drugs of Abuse in Saliva by Multi-Segment Injection Using Solid-Phase Microextraction-Automated Microfluidic Open Interface-Mass Spectrometry

There is great demand for analytical methods capable of providing high-throughput and rapid screening, especially for anti-doping and clinical point-of-care applications. In this work, automated microfluidic open interface-mass spectrometry (MOI-MS) was used for coupling with high-throughput, automated solid-phase microextraction (SPME) to achieve this objective. The design of the MOI-MS interface provides a continuous and stable electrospray fluid flow to the MS without introducing any bubble, a feature that we exploit to introduce the concept of multi-segment injection for the determination of multiple samples in a single MS run. By eliminating the need to start a new MS run between sample assays, the developed approach provides significantly simplified protocols controlled by programmed software and increased reproducibility. Furthermore, the biocompatible SPME device, which utilizes coating consisting of hydrophilic-lipophilic balanced particles embedded in a polyacrylonitrile (PAN) binder, can be directly used for biological sample analysis, as the PAN acts as both a binder and a matrix-compatible barrier, thus enabling the enrichment of small molecules while eliminating interferences associated with the presence of interfering macromolecules. The above design was employed to develop a fast, quantitative method capable of analyzing drugs of abuse in saliva samples in as little as 75 s per sample. The findings indicate that the developed method provides good analytical performance, with limits of detection ranging between 0.05 and 5 ng/mL for analysis of 16 drugs of abuse, good calibration linear correlation coefficients (R2 ≥ 0.9957), accuracy between 81 and 120%, and excellent precision (RSD% < 13%). Finally, a proof-of-concept experiment was performed to demonstrate the method's suitability for real-time analysis in anti-doping applications.

Comparison of different approaches for direct coupling of solid-phase microextraction to mass spectrometry for drugs of abuse analysis in plasma

The direct coupling of solid-phase microextraction (SPME) to mass spectrometry (MS) (SPME-MS) has proven to be an effective method for the fast screening and quantitative analysis of compounds in complex matrices such as blood and plasma. In recent years, our lab has developed three novel SPME-MS techniques: SPME-microfluidic open interface-MS (SPME-MOI-MS), coated blade spray-MS (CBS-MS), and SPME-probe electrospray ionization-MS (SPME-PESI-MS). The fast and high-throughput nature of these SPME-MS technologies makes them attractive options for point-of-care analysis and anti-doping testing. However, all these three techniques utilize different SPME geometries and were tested with different MS instruments. Lack of comparative data makes it difficult to determine which of these methodologies is the best option for any given application. This work fills this gap by making a comprehensive comparison of these three technologies with different SPME devices including SPME fibers, CBS blades, and SPME-PESI probes and SPME-liquid chromatography-MS (SPME-LC-MS) for the analysis of drugs of abuse using the same MS instrument. Furthermore, for the first time, we developed different desorption chambers for MOI-MS for coupling with SPME fibers, CBS blades, and SPME-PESI probes, thus illustrating the universality of this approach. In total, eight analytical methods were developed, with the experimental data showing that all the SPME-based methods provided good analytical performance with R ² of linearities larger than 0.9925, accuracies between 81% and 118%, and good precision with an RSD% ≤ 13%.

Polyamide Noncoated Device for Adsorption-Based Microextraction and Novel 3D Printed Thin-Film Microextraction Supports

Polyamide noncoated device for adsorption-based microextraction (PANDA microextraction) is a brand new, easy to prepare, environmentally friendly, inexpensive, and efficient sample preparation method created entirely with the use of 3D printing. The proposed method is based on the extractive proprieties of the unmodified polyamide and carbon fiber blends and is compared with the highly selective thin-film microextraction (TFME). In addition, 3D printing was used to simplify the process of TFME. Prototype sample preparation devices were evaluated by the extraction of oral fluid spiked with 38 small molecules with diverse chemical natures, such as lipophilicity in the log P range of 0.2–7.2. The samples were analyzed by high-performance liquid chromatography coupled with tandem mass spectrometry. The results indicate that chemically and thermally resistant 3D printed supports can be successfully used as a cost-saving, environmentally friendly solution for the preparation of TFME devices, alternative to the conventional metal supports, with only marginal differences in the extraction yield (mean = 4.0%, median = 1.8%, range = 0.0–22.3%, n = 38). Even more remarkably, in some cases, the newly proposed PANDA microextraction method exceeded the reference TFME in terms of the extraction efficacy and offered excellent sample cleanup as favorable matrix effects were observed (mean = −8.5%, median = 7.5%, range = −34.7–20.0%, n = 20). This innovative approach paves the road to the simplified sample preparation with the use of emerging extractive 3D printing polymers.

A microchip device based liquid-liquid-solid microextraction for the determination of permethrin and cypermethrin in water samples

In this work, for the first time, a microchip device integrating liquid-liquid-solid phase microextraction is presented. As a novel approach to microchip systems, liquid-liquid-solid microextraction was performed in a sandwiched microchip device. The microchip device consisted of three poly(methyl methacrylate) layers along with a double "Y"-shaped microchannel. As the stationary phase, polyacrylonitrile-C18 was synthesized and immobilized in the upper channel, while the beneath channel was used as a reservoir for the stagnant volume ratio of sample-to-extraction solvent phase. In this way, analytes were extracted from an aqueous sample through an organic phase into the stationary phase. The analytes were finally desorbed with a minimum amount of acetonitrile as the desorption solvent. Permethrin and cypermethrin were selected as the model analytes for extraction and subsequent analysis by gas chromatography-flame ionization detection. Under optimum conditions (extraction solvent; n-hexane, sample -to-extraction solvent volume ratio; 2:1, extraction time; 20 min, desorption solvent; acetonitrile, desorption volume; 200 μL, and desorption time; 15 min) detection limits were 3.5 and 6.0 ng mL^-1 for permethrin and cypermethrin, respectively. Relative standard deviations for intra- and inter-day reproducibility were below 8.3%. Device-to-device precision was in the range of 8.1-9.6%. The proposed microchip device was successfully applied to determine permethrin and cypermethrin in water samples with recoveries in the range of 73-96%.

Combination of pipette tip solid phase extraction and high performance liquid chromatography for determination of plant growth regulators in food samples based on the electrospun covalent organic framework/polyacrylonitrile nanofiber as highly efficient sorbent

Facile and sensitive determination of plant growth regulators (PGRs) in food samples is important but still remains great challenge. Herein, a pipette tip solid phase extraction (PT-SPE) method was developed for fast and sensitively detecting PGRs. The PT-SPE adsorbent was prepared by integrating a novel covalent organic framework (COF) of schiff base network 3 (SNW-3) and polyacrylonitrile (PAN) through electrospinning. The SNW-3 can easily adsorb PGRs with high special affinity through electrovalent bands between the ammonium ions of SNW-3 and the carboxy groups of PGRs. The polymer of PAN acts as scaffold material for SNW-3, which can lower seepage pressure hence accelerates adsorption/desorption kinetics. By combination with HPLC-DAD, a satisfactory method was successfully developed for simultaneous determination of ten PGRs in watermelon. Good analytical performances were achieved with this proposed method, including good linearity (5-500 ng/mL) with high correlation coefficients (R ≥ 0.9981), low limits of detection (S/N = 3, 0.24-3.19 ng/mL) and limits of quantification (S/N = 10, 1.65-5.72 ng/mL), satisfactory precision (intra-day RSDs ≤ 2.7%, inter-day RSDs ≤ 3.7%), and high accuracy (recovery: 82.8-113.0%). The method developed in this study shows high potential for design of high target-affinity adsorbents for food sample preparing.

Optimizing a High-Throughput Solid-Phase Microextraction System to Determine the Plasma Protein Binding of Drugs in Human Plasma

Plasma protein binding refers to the binding of a drug to plasma proteins after entering the body. The measurement of plasma protein binding is essential during drug development and in clinical practice, as it provides a more detailed understanding of the available free concentration of a drug in the blood, which is in turn critical for pharmacokinetics and pharmacodynamics studies. In addition, the accurate determination of the free concentration of a drug in the blood is also highly important for therapeutic drug monitoring and in personalized medicine. The present study uses C₁₈-coated solid-phase microextraction 96-pin devices to determine the free concentrations of a set of drugs in plasma, as well as the plasma protein binding of drugs with a wide range of physicochemical properties. It should be noted that the extracted amounts used to calculate the binding constants and plasma protein bindings should be measured at respective equilibrium for plasma and phosphate buffer. Therefore, special attention is placed on properly determining the equilibration times required to correctly estimate the free concentrations of drugs in the investigated systems. The plasma protein binding values obtained with the 96-pin devices are consistent with those reported in the literature. The 96-pin device used in this research can be easily coupled with a Concept96 or other automated robotic systems to create an automated plasma protein binding determination protocol that is both more time and labor efficient compared to conventional equilibrium dialysis and ultrafiltration methods.

Ion exchange solid phase microextraction coupled to liquid chromatography/laminar flow tandem mass spectrometry for the determination of perfluoroalkyl substances in water samples

Per- and polyfluoroalkyl substances (PFAS) are toxic and bioaccumulative compounds that are persistent in the environment due to their water and heat resistant properties. These compounds have been demonstrated to be ubiquitous in the environment, being found in water, soil, air and various biological matrices. The determination of PFAS at ultra-trace levels is thus critical to assess the extent of contamination in a particular matrix. In this work, solid phase microextraction (SPME) was evaluated as a pre-concentration technique to aid the quantitation of this class of pollutants below the EPA established advisory limits in drinking water at parts-per-trillion levels. Four model PFAS with varying physicochemical properties, namely hexafluoropropylene oxide dimer acid (GenX), perfluoro-1- butanesulfonate (PFBS), perfluoro-n-octanoic acid (PFOA) and perfluoro-1-octanesulfonate (PFOS) were studied as a proof of concept. Analysis was performed with the use of ultra-high pressure liquid chromatography-laminar flow tandem mass spectrometry (UHPLC-MS/MS). This study proposes the use of hydrophilic-lipophilic balance-weak anion-exchange/polyacrylonitrile (HLB-WAX/PAN) as a SPME coating, ideal for all model analytes. A sample volume of 1.5 mL was used for analysis, the optimized protocol including 20 min extraction, 20 min desorption and 6 min LC/MS analysis. This method achieved LOQs of 2.5 ng L^- 1 (PFOS) and 1 ng L ^- 1 (GenX, PFBS and PFOA) with satisfactory precision and accuracy values evaluated over a period of 5 days.

Hyphenated sample preparation-electrospray and nano-electrospray ionization mass spectrometry for biofluid analysis

Stand-alone electrospray ionization mass spectrometry (ESI-MS) has been advancing through enhancements in throughput, selectivity and sensitivity of mass spectrometers. Unlike traditional MS techniques which usually require extensive offline sample preparation and chromatographic separation, many sample preparation techniques are now directly coupled with stand-alone MS to enable outstanding throughput for bioanalysis. In this review, we summarize the different sample clean-up and/or analyte enrichment strategies that can be directly coupled with ESI-MS and nano-ESI-MS for the analysis of biological fluids. The overview covers the hyphenation of different sample preparation techniques including solid phase extraction (SPE), solid phase micro-extraction (SPME), slug flow micro-extraction/nano-extraction (SFME/SFNE), liquid extraction surface analysis (LESA), extraction electrospray, extraction using digital microfluidics (DMF), and electrokinetic extraction (EkE) with ESI-MS and nano-ESI-MS.

Assessment of solid phase microextraction as a sample preparation tool for untargeted analysis of brain tissue using liquid chromatography-mass spectrometry

This work presents an evaluation of solid-phase microextraction (SPME) SPME in combination with liquid chromatography-high resolution mass spectrometry (LC-HRMS) as an analytical approach for untargeted brain analysis. The study included a characterization of the metabolite coverage provided by C18, mixed-mode (MM, with benzene sulfonic acid and C18 functionalities), and hydrophilic lipophilic balanced (HLB) particles as sorbents in SPME coatings after extraction from cow brain homogenate at static conditions. The effects of desorption solvent, extraction time, and chromatographic modes on the metabolite features detected were investigated. Method precision and absolute matrix effects were also assessed. Among the main findings of this work, it was observed that all three tested coating chemistries were able to provide comparable brain tissue information. HLB provided higher responses for polar metabolites; however, as these fibers were prepared in-house, higher inter-fiber relative standard deviations were also observed. C18 and HLB coatings offered similar responses with respect to lipid-related features, whereas MM and C18 provided the best results in terms of method precision. Our results also showed that the use of methanol is essential for effective desorption of non-polar metabolites. Using a reversed-phase chromatographic method, an average of 800 and 1200 brain metabolite features detected in positive and negative modes, respectively, met inter-fibre RSD values below 30% (n=4) after removal of fibre and solvent artefacts from the associated datasets. For features detected using a lipidomics method, a total of 900 and 1800 features detected using C18 fibers in positive and negative mode, respectively, met the same criteria. In terms of absolute matrix effects, the majority of the model metabolites tested showed values between 80 and 120%, which are within the acceptable range. Overall, the findings of this work lay the foundation for further optimization of parameters for SPME-LC-HRMS methods suitable for in vivo and ex vivo brain (and other tissue) untargeted studies, and support the applicability of this approach for non-destructive tissue metabolomics.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Nanoparticle-based polyacrylonitrile monolithic column for highly efficient micro solid-phase extraction of carotenoids and vitamins in human serum

In this work, a biocompatible monolithic column based micro-solid-phase extraction (µ-SPE) method was developed for biological fluid analysis. A novel nanoparticle-based polyacrylonitrile monolithic column (C30 NP-PMC) was fabricated by incorporating triacontyl (C30) modified silica nanoparticles (NPs) into the polyacrylonitrile monolithic matrix through thermally induced phase separation. With efficient mass transfer and sorption capacity, C30 NP-PMC exhibited outstanding performance for the extraction of carotenoids and fat-soluble vitamins (FSVs) from human serum samples, superior to commercial C18 cartridges as well as liquid-liquid extraction (LLE) method. Under optimal conditions, the proposed µ-SPE method coupled with high-performance liquid chromatography-diode array detection (HPLC-DAD) achieved satisfactory limits of detection (LODs) (1.5-75.0 ng/mL) and good recoveries (85.0-106.5 %) with relative standard deviations (RSDs) of less than 12.1% by consuming lower sorbent (35.0 mg) and organic solvent (0.8 mL). Successful application of the developed method demonstrated the great potential of such monolithic sorbents for efficient isolation and preconcentration of trace analytes from blood samples.

Development of a thin-film solid-phase microextraction (TF-SPME) method coupled to liquid chromatography and tandem mass spectrometry for high-throughput determination of steroid hormones in white sucker fish plasma

Steroid hormones (SH) play a number of important physiological roles in vertebrates including fish. Changes in SH concentration significantly affect reproduction, differentiation, development, or metabolism. The objective of this study was to develop an in vitro high-throughput thin-film solid-phase microextraction (TF-SPME)-liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for targeted analysis of endogenous SH (cortisol, testosterone, progesterone, estrone (E1), 17β-estradiol (E2), and 17α-ethinylestradiol (EE2)) in wild white sucker fish plasma where the concentrations of the analytes are substantially low. A simple TF-SPME method enabled the simultaneous determination of free and total SH concentrations. The use of biocompatible coating allowed direct extraction of these hormones from complex biological samples without prior preparation. The carryover was less than 3%, thereby ensuring reusability of the devices and reproducibility. The results showed that TF-SPME was suitable for the analysis of compounds in the polarity range between 1.28 and 4.31 such as SH at different physicochemical properties. The proposed method was validated according to bioanalytical method validation guidelines. The limit of detection (LOD) and limit of quantification(LOQ) for cortisol, testosterone, progesterone, E1, E2, and EE2 were from 0.006 to 0.150 ng/mL and from 0.020 to 0.500 ng/mL, respectively. The recovery for the method was about 85%, and the accuracy and precision of the method for cortisol, testosterone, and progesterone were ≤ 6.0% and ≤ 11.2%, respectively, whereas those for E1, E2, and EE2 were ≤ 15.0% and ≤ 10.2%, respectively. On the basis of this study, TF-SPME demonstrated several important advantages such as simplicity, sensitivity, and robustness under laboratory conditions. Graphical abstract.

Rapid and high-throughput screening of multi-residue pharmaceutical drugs in bovine tissue using solid phase microextraction and direct analysis in real time-tandem mass spectrometry (SPME-DART-MS/MS)

Direct Analysis in Real Time (DART) has become a popular research area in food safety monitoring due to its unique characteristics that allow rapid and high-throughput screening of complex matrices with minimal sample preparation. The current research aimed to investigate the detection and quantitation capabilities of solid phase microextraction (SPME) and DART coupled to tandem mass spectrometry MS/MS for a large number of pharmaceutical drugs covering a wide range of physico-chemical properties (log P, -1.22-5.97) in complex animal-food matrices such as beef tissue. 53% of the 98 target analytes selected initially could be efficiently ionized by DART and quantified at or below the Canadian maximum residue limits (MRLs) and US regulatory tolerances in bovine muscle. Despite using only two internal standards for correction, promising results were obtained for these analytes, where 62% of the detected analytes achieved linear correlation coefficients >0.99 within the evaluated range of concentrations (0.25-3X, where X corresponds to the MRL for each target analyte). In addition, more than 92% of the detected analytes achieved average accuracies within the 70-120% range of their true concentrations and intraday repeatability RSDs ≤25% at the 0.5X, 1X, and 2X concentration levels. The fully automated sample preparation workflow allowed for total extraction and analysis times as short as 1 min time per sample. While DART has limited capabilities in terms of analyte coverage, this research highlights the potential usefulness of SPME-DART-MS/MS as a method for rapid analysis in food safety monitoring applications.

Optimization of Coated Blade Spray for Rapid Screening and Quantitation of 105 Veterinary Drugs in Biological Tissue Samples

Rapid and efficient determination of contaminants at trace levels in tissue samples has become an unmet need around the globe. Coated blade spray (CBS) extraction/ionization is a technology capable of performing, with a single device, enrichment of analytes present in complex matrices, as well as the direct interface and introduction of said analytes into the mass spectrometer via electrospray ionization. To facilitate the challenging rapid tissue screening, we describe for the first time the use of a very thin layer of biocompatible polyacrylonitrile as a CBS device undercoating to make metal surface biocompatible. This add-on is meant to protect the portion of the uncoated stainless-steel of the blade that is normally exposed to the matrix, consequently becoming susceptible to adhesion of matrix macromolecules, cells, and fat. In addition, we present for the first time the use of CBS in negative ionization mode for quantitative purposes. The optimized CBS workflow allows for rapid and high-throughput screening and quantitation of 105 veterinary drugs in homogenized bovine tissue in both negative and positive ionization mode in one single run using a single CBS device with analysis times as short as 1 min per sample when 96 extractions are simultaneously conducted. While only two internal standards were used for correction, one per ionization mode, excellent accuracy and precision were achieved, with more than 90% of analytes falling within the 70-120% range of their true concentrations and yielding RSD ≤ 25% at three validation levels. The majority of analytes achieved linear correlation coefficients >0.99, and all 105 analytes were able to meet both Canadian and U.S. regulatory levels.

Unique Solid Phase Microextraction Sampler Reveals Distinctive Biogeochemical Profiles among Various Deep-Sea Hydrothermal Vents

Current methods for biochemical and biogeochemical analysis of the deep-sea hydrothermal vent ecosystems rely on water sample recovery, or in situ analysis using underwater instruments with limited range of analyte detection and limited sensitivity. Even in cases where large quantities of sample are recovered, labile dissolved organic compounds may not be detected due to time delays between sampling and preservation. Here, we present a novel approach for in situ extraction of organic compounds from hydrothermal vent fluids through a unique solid phase microextraction (SPME) sampler. These samplers were deployed to sample effluent of vents on sulphide chimneys, located on Axial Seamount in the North-East Pacific, in the Urashima field on the southern Mariana back-arc, and at the Hafa Adai site in the central Mariana back-arc. Among the compounds that were extracted, a wide range of unique organic compounds, including labile dissolved organic sulfur compounds, were detected through high-resolution LC-MS/MS, among which were biomarkers of anammox bacteria, fungi, and lower animals. This report is the first to show that SPME can contribute to a broader understanding of deep sea ecology and biogeochemical cycles in hydrothermal vent ecosystems.

Introducing a mechanically robust SPME sampler for the on-site sampling and extraction of a wide range of untargeted pollutants in environmental waters

The present study introduces a mechanically robust, sealable SPME sampler for the on-site sampling and extraction of a wide range of untargeted pollutants in environmental waters. Spray-coating and dip coating methodologies were used to coat the surfaces of six stainless steel bolts with a layer of HLB/PAN particles, which served as the extractive substrate in the proposed device. In addition, this sampler was designed to withstand rough handling, long storage times, and various environmental conditions. In order to identify whether the sampler was able to stabilize extracted compounds for long periods of time, the effects of storage time and temperature were evaluated. The results of these tests showed no significant differences in the quantity and quality of the extracted chemicals following 12 days storage at room temperature, thus confirming the device's suitability for use at sampling sites that are far away from the laboratory facilities. The proposed device was also used to perform extraction and untargeted analyses of river waters in five different geographical locations. The constituent chemicals in the samplers were analyzed and determined using high-resolution HPLC-Orbitrap MS. Toxin and Toxin-Target Database was used as a reference database for toxins and environmental contaminants. Ultimately, over 80 tentative chemicals with widely varying hydrophobicities ranging within -2.43 < logP <11.9-including drugs, metabolites, wide ranges of toxins, pesticide, and insecticides-were identified in the samplers used in the different rivers. The log P values for the tentative analytes confirmed that the introduced device is suitable for the extraction and trace analysis of wide ranges of targeted and untargeted pollutants.

In vivo monitoring of rat brain endocannabinoids using solid-phase microextraction

Aim: Solid-phase microextraction is proposed to measure concentrations of anandamide and 2-arachidonoyl glycerol in live rat brains in response to stress. Materials & methods: Solid-phase microextraction fibers were prepared from steel with 1.5 mm extraction coating. 24 male rats were divided into groups based on brain region, stria terminalis or posterior hypothalamus and loud noise or control groups. The fibers were desorbed in acetonitrile-water (75:25) and analyzed by ultraperformance LC-MS/MS. The linear range of the method was 0.05-50 ng/ml and the in vivo concentrations were found to be between 0.3 and 40 ng/ml. Conclusion: The new approach was successfully used to determine the concentrations of anandamide and 2-arachidonoyl glycerol in vivo and could be used in the future to measure other endogenous compounds.

A porous aromatic framework as a versatile fiber coating for solid-phase microextraction of polar and nonpolar aromatic organic compounds

A porous aromatic framework (PAF) derived from triphenylamine (type PAF-41) was prepared and is shown to be a viable coating for fibrous solid-phase microextraction (SPME). PAF-41 can be easily synthesized and has a high surface area, a rich π-electron structure, and electron-rich nitrogen atoms in its framework. The PAF-41-coated fibrous SPME extractor was combined with a gas chromatographic separation and flame ionization detection. The method was applied to the quantitation of some aromatic organic compounds (AOCs), including polar amphetamine and methamphetamine and nonpolar ethylbenzene, o-, m- and p-xylenes, and styrene. The method was optimized after which a linear response is found for the 10-500 ng·mL^-1 amphetamine and methamphetamine concentration ranges. The limits of detection are 1.0 and 0.5 ng·mL^-1; and relative standard deviations for six repeated extractions with a single fiber are 5.3 and 6.7%. The method was applied for the determination of amphetamine and methamphetamine in spiked urine samples without any pretreatment except for dilution with water. The PAF-41 modified fiber also was applied to the extraction of styrene, xylenes and ethylbenzene. The enrichment capacities of the extractor for these AOCs were superior to those of commercial SPME extractors. Graphical abstract (a) Schemetic of the PAF-41-coated solid-phase microextraction (SPME) fiber. (b) Scanning electron microscope images of the PAF-41 fiber.

Solid-phase microextraction: An appealing alternative for the determination of endogenous substances - A review

The determination of endogenous substances is of great significance for obtaining important biotic information such as biological components, metabolic pathways and disease biomarkers in different living organisms (e.g. plants, insects, animals and humans). However, due to the complex matrix and the trace concentrations of target analytes, the sample preparation procedure is an essential step before the analytes of interest are introduced into a detection instrument. Solid-phase microextraction (SPME), an emerging sample preparation technique that integrates sampling, extraction, concentration, and sample introduction into one step, has gained wide acceptance in various research fields, including in the determination of endogenous compounds. In this review, recent developments and applications of SPME for the determination of endogenous substances over the past five years are summarized. Several aspects, including the design of SPME devices (sampling configuration and coating), applications (in vitro and in vivo sampling), and coupling with emerging instruments (comprehensive two-dimensional gas chromatography (GC × GC), ambient mass spectrometry (AMS) and surface enhanced Raman scattering (SERS)) are involved. Finally, the challenges and opportunities of SPME methods in endogenous substances analysis are also discussed.

Improving metabolome coverage and data quality: advancing metabolomics and lipidomics for biomarker discovery

This Feature Article highlights some of the key challenges within the field of metabolomics and examines what role separation and analytical sciences can play to improve the use of metabolomics in biomarker discovery and personalized medicine. Recent progress in four key areas is highlighted: (i) improving metabolite coverage, (ii) developing accurate methods for unstable metabolites including in vivo global metabolomics methods, (iii) advancing inter-laboratory studies and reference materials and (iv) improving data quality, standardization and quality control of metabolomics studies.

Development of a Microfluidic Open Interface with Flow Isolated Desorption Volume for the Direct Coupling of SPME Devices to Mass Spectrometry

Technologies that efficiently integrate the sampling and sample preparation steps with direct introduction to mass spectrometry (MS), providing simple and sensitive analytical workflows as well as capabilities for automation, can generate a great impact in a vast variety of fields, such as in clinical, environmental, and food-science applications. In this study, a novel approach that facilitates direct coupling of Bio-SPME devices to MS using a microfluidic design is presented. This technology, named microfluidic open interface (MOI), which operates under the concept of flow-isolated desorption volume, consists of an open-to-ambient desorption chamber (V ≤ 7 μL) connected to an ionization source. Subsequently, compounds of interest are transported to the ionization source by means of the self-aspiration process intrinsic of these interfaces. Thus, any ionization technology that provides a reliable and constant suction, such as electrospray ionization (ESI), atmospheric-pressure chemical ionization (APCI), or inductively coupled plasma ionization (ICP), can be hyphenated to MOI. Using this setup, the desorption chamber is used to release target compounds from the coating, while the isolation of the flow enables the ionization source to be continuously fed with solvent, all without the necessity of employment of additional valves. As a proof of concept, the design was applied to an ESI-MS/MS system for experimental validation. Furthermore, numerical simulations were undertaken to provide a detailed understanding of the fluid flow pattern inside the interface, then used to optimize the system for better efficiency. The analytical workflow of the developed Bio-SPME-MOI-MS setup consists of the direct immersion of SPME fibers into the matrix to extract/enrich analytes of interest within a short period of time, followed by a rinsing step with water to remove potentially adhering proteins, salts, and/or other interfering compounds. Next, the fiber is inserted into the MOI for desorption of compounds of interest. Finally, the volume contained in the chamber is drained and moved toward the electrospray needle for ionization and direct introduction to MS. Aiming to validate the technology, the fast determination of selected immunosuppressive drugs (e.g., tacrolimus, cyclosporine, sirolimus, and everolimus) from 100 μL of whole blood was assessed. Limits of quantitation in the subppb range were obtained for all studied compounds. Good linearity (r² ≥ 0.99) and excellent precision, with (8%) and without (14%) internal standard correction, were attained.

Preparation and characterization of an aptamer-functionalized solid-phase microextraction fiber and its application in the selective monitoring of adenosine phosphates with liquid chromatography and tandem mass spectrometry

An aptamer with adenosine triphosphate as a ligand was immobilized onto the surface of a porous-polymer-coated fiber to obtain an aptamer-functionalized porous-polymer-coated solid-phase microextraction fiber. The fiber was observed with a crosslinked and porous morphological surface structure. It shows specific selectivity to adenosine triphosphate with a selectivity coefficient of 22.1 compared to the scrambled oligonucleotide functionalized fiber, and the selectivity factors over other analogues and reference compounds were from 6.1 to 77.5. When the fiber-based solid-phase microextraction was coupled with liquid chromatography and tandem mass spectrometry, detection limits of 2.7, 29, and 34 μg/L were achieved for adenosine triphosphate, adenosine diphosphate, and adenosine monophosphate, respectively. The spiking recoveries of 77.6-91.9% were achieved for trace adenosine phosphates in human serum sample. Furthermore, the fibers showed high stability and good reusability and could be used over 50 times for the real serum sample pretreatment without remarkable performance reduction.

All-in-one solid-phase microextraction: Development of a selective solid-phase microextraction fiber assembly for the simultaneous and efficient extraction of analytes with different polarities

In the present work, for the first time, an all-in-one solid-phase microextraction technique was developed for the simultaneous and efficient extraction of analytes within a vast polarity range. A novel fiber assembly composed of two different steel components each coated with different coatings (polydimethylsiloxane and polyethylene glycol) in terms of polarity by sol-gel technology was employed for the extraction of model compounds of different polarity in a single run followed by gas chromatography with mass spectrometry. Effective parameters in the extraction step and gas chromatography with mass spectrometry analysis were optimized for all model compounds. The detection limits of the developed method for model compounds were below 0.2 ng/L. The repeatability and reproducibility of the proposed method, explained by relative standard deviation, varied between 7.22 and 9.15% and between 7.95 and 14.90 (n = 5), respectively. Results showed that, under random conditions, compared to separate extractions performed by two other differently end-coated components that had not been assembled as the final dual fiber, as two individual fibers; simultaneous, efficient and relatively selective extraction of all model compounds was obtained in a single run by the proposed all-in-one technique. Finally, the optimized procedure was applied to extraction and determination of the model compounds in spiked water samples.

Enhanced Cell Adhesion on a Nano-Embossed, Sticky Surface Prepared by the Printing of a DOPA-Bolaamphiphile Assembly Ink

Inspired by adhesive mussel proteins, nanospherical self-assemblies were prepared from bolaamphiphiles containing 3,4-dihydroxyphenylalanine (DOPA) moieties, and a suspension of the bolaamphiphile assemblies was used for the preparation of a patterned surface that enhanced cell adhesion and viability. The abundant surface-exposed catechol groups on the robust bolaamphiphile self-assemblies were responsible for their outstanding adhesivity to various surfaces and showed purely elastic mechanical behaviour in response to tensile stress. Compared to other polydopamine coatings, the spherical DOPA-bolaamphiphile assemblies were coated uniformly and densely on the surface, yielding a nano-embossed surface. Cell culture tests on the surface modified by DOPA-bolaamphiphiles also showed enhanced cellular adhesivity and increased viability compared to surfaces decorated with other catecholic compounds. Furthermore, the guided growth of a cell line was demonstrated on the patterned surface, which was prepared by inkjet printing using a suspension of the self-assembled particles as an ink. The self-assembly of DOPA-bolaamphiphiles shows that they are a promising adhesive, biocompatible material with the potential to modify various substances.

Review of geometries and coating materials in solid phase microextraction: Opportunities, limitations, and future perspectives

The development of new support and geometries of solid phase microextraction (SPME), including metal fiber assemblies, coated-tip, and thin film microextraction (TFME) (i.e. self-supported, fabric and blade supported), as well as their effects on diffusion and extraction rate of analytes were discussed in the current review. Application of main techniques widely used for preparation of a variety of coating materials of SPME, including sol-gel technique, electrochemical and electrospinning methods as well as the available commercial coatings, were presented. Advantages and limitations of each technique from several aspects, such as range of application, biocompatibility, availability in different geometrical configurations, method of preparation, incorporation of various materials to tune the coating properties, and thermal and physical stability, were also investigated. Future perspectives of each technique to improve the efficiency and stability of the coatings were also summarized. Some interesting materials including ionic liquids (ILs), metal organic frameworks (MOFs) and particle loaded coatings were briefly presented.