Water Analysis: Emerging Contaminants and Current Issues

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.

Determination and risk assessment of UV filters and benzotriazole UV stabilizers in wastewater from a wastewater treatment plant in Lüneburg, Germany

UV filters and benzotriazole UV stabilizers are considered emerging contaminants in the environment. LC-MS/MS and GC-MS methods, involving a single solid phase extraction protocol, were developed and validated to determine eight UV filters and seven UV stabilizers, respectively in wastewater from a wastewater treatment plant (WWTP) in Lüneburg, Germany. The LC-MS/MS method exhibited extraction recoveries of ≥ 71% at six different fortification levels with limits of detection (LODs) range of 0.02 ng mL-1 - 0.09 ng mL-1. Extraction recoveries of 47 to 119% at six different fortification levels were obtained for the GC-MS method with LODs range of 0.01 - 0.09 ng mL-1. Among the UV filters, the highest mean concentration was determined for octocrylene (OCR) in influent (3.49 ng mL-1) while the highest mean concentration was measured for 2-hydroxy-4-octyloxybenzophenone (UV 531) in influent (0.44 ng mL-1) among the UV stabilizers. Potential risk to aquatic organisms was assessed by the risk quotient approach. Only OCR presented a high risk to aquatic invertebrates whereas 2-ethylhexyl 4-methoxycinnamate (EHMC) and 2-ethylhexyl salicylate (EHS) posed high risks to algae. Benzotriazole UV stabilizers presented negligible risks to aquatic invertebrates and fish. This work reports the detection of rarely studied 4-aminobenzoic acid (PABA) and UV 531 in WWTP influent and effluent. The occurrence and risk assessment of target benzotriazole UV stabilizers in wastewater from a German WWTP was demonstrated for the first time.

Role of niche and micro-habitat preferences in per- and polyfluoroalkyl substances occurrence in the gills of tropical lake fish species

The present study has investigated per- and poly-fluoroalkyl substances (PFAS) in the gill tissues of various fish species inhabiting different trophic levels within Eleyele Lake, a tropical freshwater lake in Nigeria. The mean concentrations of PFAS congeners were determined, and their trends and patterns were analyzed across different trophic species. The results revealed variations in congener abundance and species-specific patterns that was influenced by habitat and niche preferences. Multivariate associations using canonical-correlation analysis (CCA) revealed distinct trends in the relationships between gill concentrations of specific PFAS congeners and different trophic groups. The strongest congener relationships were observed in the pelagic omnivore (Oreochromic niloticus: ON) with positive associations for 4:2 FTS, 9CL-PF3ONS, PFTDA, MeFOSA and PFHxS. The differences in congener profiles for the two herbivorous fish (Sarotherodon melanotheron (SM) and Coptodon galilaeus (CG)) reflect possible divergence in microhabitat and niche preferences. Furthermore, the congener overlaps between the herbivore (CG), and benthic omnivore (Clarias gariepinus: ClG) indicate a possible niche and microhabitat overlap. Our study provides valuable insights into the congener dynamics of PFAS at Eleyele Lake. However, the dissimilarity and overlapping PFAS congener profile in fish gills reflects the interplay of species niche preference and microhabitat associations. The present study highlights the need for further research to assess ecological risks and develop effective PFAS management strategies.

Comprehensive review of emerging contaminants: Detection technologies, environmental impact, and management strategies

Emerging contaminants (ECs) are a diverse group of unregulated pollutants increasingly present in the environment. These contaminants, including pharmaceuticals, personal care products, endocrine disruptors, and industrial chemicals, can enter the environment through various pathways and persist, accumulating in the food chain and posing risks to ecosystems and human health. This comprehensive review examines the chemical characteristics, sources, and varieties of ECs. It critically evaluates the current understanding of their environmental and health impacts, highlighting recent advancements and challenges in detection and analysis. The review also assesses existing regulations and policies, identifying shortcomings and proposing potential enhancements. ECs pose significant risks to wildlife and ecosystems by disrupting animal hormones, causing genetic alterations that diminish diversity and resilience, and altering soil nutrient dynamics and the physical environment. Furthermore, ECs present increasing risks to human health, including hormonal disruptions, antibiotic resistance, endocrine disruption, neurological effects, carcinogenic effects, and other long-term impacts. To address these critical issues, the review offers recommendations for future research, emphasizing areas requiring further investigation to comprehend the full implications of these contaminants. It also suggests increased funding and support for research, development of advanced detection technologies, establishment of standardized methods, adoption of precautionary regulations, enhanced public awareness and education, cross-sectoral collaboration, and integration of scientific research into policy-making. By implementing these solutions, we can improve our ability to detect, monitor, and manage ECs, reducing environmental and public health risks.

Unravelling the potential of magnetic nanoparticles: a comprehensive review of design and applications in analytical chemistry

The study of nanoparticles has emerged as a prominent research field, offering a wide range of applications across various disciplines. With their unique physical and chemical properties within the size range of 1-100 nm, nanoparticles have garnered significant attention. Among them, magnetic nanoparticles (MNPs) exemplify promising super-magnetic characteristics, especially in the 10-20 nm size range, making them ideal for swift responses to applied magnetic fields. In this comprehensive review, we focus on MNPs suitable for analytical purposes. We investigate and classify them based on their analytical applications, synthesis routes, and overall utility, providing a detailed literature summary. By exploring a diverse range of MNPs, this review offers valuable insights into their potential application in various analytical scenarios.

Understanding Rejection Mechanisms of Trace Organic Contaminants by Polyamide Membranes via Data-Knowledge Codriven Machine Learning

Data-driven machine learning (ML) provides a promising approach to understanding and predicting the rejection of trace organic contaminants (TrOCs) by polyamide (PA). However, various confounding variables, coupled with data scarcity, restrict the direct application of data-driven ML. In this study, we developed a data-knowledge codriven ML model via domain-knowledge embedding and explored its application in comprehending TrOC rejection by PA membranes. Domain-knowledge embedding enhanced both the predictive performance and the interpretability of the ML model. The contribution of key mechanisms, including size exclusion, charge effect, hydrophobic interaction, etc., that dominate the rejections of the three TrOC categories (neutral hydrophilic, neutral hydrophobic, and charged TrOCs) was quantified. Log D and molecular charge emerge as key factors contributing to the discernible variations in the rejection among the three TrOC categories. Furthermore, we quantitatively compared the TrOC rejection mechanisms between nanofiltration (NF) and reverse osmosis (RO) PA membranes. The charge effect and hydrophobic interactions possessed higher weights for NF to reject TrOCs, while the size exclusion in RO played a more important role. This study demonstrated the effectiveness of the data-knowledge codriven ML method in understanding TrOC rejection by PA membranes, providing a methodology to formulate a strategy for targeted TrOC removal.

HDPairFinder: A data processing platform for hydrogen/deuterium isotopic labeling-based nontargeted analysis of trace-level amino-containing chemicals in environmental water

The combination of hydrogen/deuterium (H/D) formaldehyde-based isotopic methyl labeling with solid-phase extraction and high-performance liquid chromatography-high resolution mass spectrometry (HPLC-HRMS) is a powerful analytical solution for nontargeted analysis of trace-level amino-containing chemicals in water samples. Given the huge amount of chemical information generated in HPLC-HRMS analysis, identifying all possible H/D-labeled amino chemicals presents a significant challenge in data processing. To address this, we designed a streamlined data processing pipeline that can automatically extract H/D-labeled amino chemicals from the raw HPLC-HRMS data with high accuracy and efficiency. First, we developed a cross-correlation algorithm to correct the retention time shift resulting from deuterium isotopic effects, which enables reliable pairing of H- and D-labeled peaks. Second, we implemented several bioinformatic solutions to remove false chemical features generated by in-source fragmentation, salt adduction, and natural 13C isotopes. Third, we used a data mining strategy to construct the AMINES library that consists of over 38,000 structure-disjointed primary and secondary amines to facilitate putative compound annotation. Finally, we integrated these modules into a freely available R program, HDPairFinder.R. The rationale of each module was justified and its performance tested using experimental H/D-labeled chemical standards and authentic water samples. We further demonstrated the application of HDPairFinder to effectively extract N-containing contaminants, thus enabling the monitoring of changes of primary and secondary N-compounds in authentic water samples. HDPairFinder is a reliable bioinformatic tool for rapid processing of H/D isotopic methyl labeling-based nontargeted analysis of water samples, and will facilitate a better understanding of N-containing chemical compounds in water.

Database and review of disinfection by-products since 1974: Constituent elements, molecular weights, and structures

Since trihalomethanes were discovered in 1974, disinfection by-products (DBPs) in drinking water have attracted extensive attention. In 2011, more than 600 known DBPs were compiled; however, newly reported DBPs have not been integrated. The rapid development of mass spectrometry has led to a significant increase in the number of DBPs, therefore, there is a need to develop a database of all DBPs and their properties. Herein, a database including 6310 DBPs (651 confirmed, 1478 identified and 4142 proposed) reported between 1974 and 2022 was constructed and made available for public use at https://dbps.com.cn/main. This database can be a tool in screening new DBPs, comprehensively reviewing, and developing predictive models. In this paper, to demonstrate the functions of the database and provide useful information for this area, the origin of the collected DBPs was presented, and some basic information, including elemental composition, molecular weight, functional groups, and carbon frameworks, were comparatively analyzed. The results showed that the proportion of DBPs verified by standard compounds and frequently detected in real water is less than 7.0%, and most of DBPs remained to be identified. Approximately 88% of DBPs contain halogens, and brominated -DBPs occupied a similar ratio to chlorinated -DBPs in real water. Acids were the main functional groups of DBPs, aliphatic and aromatic compounds are the two major carbon frameworks, and the molecular weights of most DBPs ranged from 200 to 400 Da. In addition, 4142 proposed DBPs as obtained using high-resolution mass spectrometry, were characterized based on the modified van Krevelen diagram and adjusted indexes with halogens. Most of the proposed DBPs featured lignin and tannin structures, and phenolic/highly unsaturated DBPs account for the majority.

Seasonal variations in dissolved organic matter concentration and composition in an outdoor system for bank filtration simulation

Dissolved organic matter (DOM) in surface waters can vary markedly in character depending on seasonal variations such as rainfall intensity, UV radiations and temperature. Changes in DOM as well as temperature and rainfall intensity over the year can affect the biochemical processes occurring in bank filtration (BF). Identification and characterization of DOM in the surface water could help to optimize the water treatment and provide stable and safe drinking water. This study investigated year-long variations of DOM concentrations and compositions in a surface water of a circulated outdoor pond (research facility) connected to a BF passage. DOM was dominated by humic substances and a changing pattern of DOM in surface water was observed throughout the year. A significant increase of DOM (∼ 38%) in surface water was noted in August compared to November. The fluorescent DOM showed that DOM in summer was enriched with the degradable fraction whilst non-degradable fraction was dominated in winter. A constant (1.7 ± 0.1 mg/L) effluent DOM was recirculated in the system throughout the year. DOM removal through BF varied between 4% to 39% and was achieved within a few meters after infiltration and significantly correlated with influent DOM concentration (R2 = 0.82, p < 0.05). However, no significant (p > 0.05) change in the removal of DOM was observed in two subsurface layers (upper and lower). This study highlights the presence of a constant non-degradable DOM in the bank filtrate, which was not affected by temperature, redox conditions and UV radiations.

Non-target analysis for water characterization: wastewater treatment impact and selection of relevant features

Non-target analyses were conducted to characterize and compare the molecular profiles (UHPLC-HRMS fingerprint) of water samples from a wastewater treatment plant (WWTP). Inlet and outlet samples were collected from three campaigns spaced 6 months apart in order to highlight common trends. A significant impact of the treatment on the sample fingerprints was shown, with a 65-70% abatement of the number of features detected in the effluent, and more polar, smaller and less intense molecules found overall compared to those in WWTP influent waters. Multivariate analysis (PCA) associated with variations of the features between inlets and outlets showed that features appearing or increasing were correlated with effluents while those disappearing or decreasing were correlated with influents. Finally, effluent features considered as relevant to a potentially adverse effect on aqueous media (i.e. those which appeared or increased or slightly varied from the influent) were highlighted. Three hundred seventy-five features common with the 3 campaigns were thus selected and further characterized. For most of them, elementary composition was found to be C, H, N, O (42%) and C, H, N, O, P (18%). Considering the MS2 spectra and several reference MS2 databases, annotations were proposed for 35 of these relevant features. They include synthetic products, pharmaceuticals and metabolites.

Composting post-anaerobic digestion for emerging contaminant biodegradation: Impacts of operating conditions

Sustainable manure management technologies are needed, and combining anaerobic digestion (AD) for energy generation and aerobic composting (AC) to stabilize digestate and remove emerging contaminants (ECs), including veterinary pharmaceuticals and steroid hormones, is promising. This study identified post-AD, AC operating conditions that maximized degradation of study ECs, expected to be present in cattle manure digested using treated municipal wastewater as the water source. Study ECs included sulfamethoxazole (SMX), chlortetracycline (CTC), oxytetracycline (OTC), estrone (E1), and naproxen (NPX). Composting conditions were simulated in bench-scale reactors, with microorganisms from digestate produced in an AD system (25L scale), by varying temperatures, pH, and carbon source compositions (representing food waste/manure co-digestion with different residence times). Results indicate maximum SMX biodegradation occurred at 35°C, pH 7, and with high levels of easily degradable carbon (≥99%, 99%, and 98%), and maximum E1 biodegradation occurred at 35°C, and with low levels of easily degradable carbon (≥97% and 99%). Abiotic degradation was responsible for the nearly complete removal of tetracyclines under all conditions and for partial degradation of NPX (between 20% and 48%). Microorganisms originating from the AD system putatively capable of SMX and E1 biodegradation, or of contributing to biodegradation during the AC phase, were identified, including phylotypes previously shown to biodegrade SMX (Brevundimonas and Alcaligenes).

Iron particles lower than 10 μm in drinking water dominate particle catalysis effect on disinfection byproduct formation

Iron particles could catalyze disinfection by-product (DBP) formation in drinking water distribution systems (DWDS), but the catalytic effects of iron particles considering size effects have not been focused. Here, we first found that fine particles (lower than 10 μm) dominated the particle catalysis effect of the iron particles on the formation of DBPs containing multiple Cl atoms (DBP-3Cl), especially those with aromatic structure and containing multiple N atoms (DBP-3N). The loose deposit particles were filtered through 50 μm (F50), 10 μm (F10) and 1 μm (F10) membranes, and their turbidity values were 231.6, 53.4 and 1.1 NTU, respectively. In mass ratio, F50, F10 and F1 accounted for 84 %, 15 % and 1 % of unfiltered samples. Notably, the lower mass F10 generated more DBP-3Cl and DBP-3N than F50. Metal crystals and natural organic matters showed little difference among different sizes. The high catalytic activity of particles in F10 due to size effect was proved to be the essential mechanism. F1 contained few particles to affect DBP formation. In toxicity evaluation, the toxicity of F10 was even higher than F50. Therefore, fine particles with sizes lower than 10 μm may play a dominate role in the catalytic effect on DBP transformation in DWDS.

NO3- Promotes Nitrogen-Containing Disinfection Byproduct Formation in Corroded Iron Drinking Water Pipes

Nitrogen-containing disinfection byproducts (N-DBPs) are highly toxic DBPs in drinking water. Though, under normal conditions, NO3- could not directly participate in disinfection reactions to generate N-DBPs, here, we first found that NO3- could promote the formation of N-DBPs in corroded iron drinking water pipes. The coexistence of corrosion produced Fe(II) and iron oxides is a critical condition for the transformation of N species; meanwhile, most of the newly generated N-DBPs had aromatic fractions. The Fe-O-C bond formed between iron corrosion products and natural organic matter promoted electron transfer for the N transformation with pyrrolic N as the intermediate N species. Density functional calculation confirmed that the coexistence of Fe(II) and iron oxides effectively reduced the Gibbs free energy for NO3- reduction. ΔG of the key rate-determining step from NO* to NOH* decreased from 1.55 eV on FeOOH to 1.35 eV on Fe(II)+FeOOH. In addition, the large decrease of cell viability of the water samples from 74.3% to 45.4% further confirmed the formation of highly toxic N-DBPs. Thus, in a drinking water distribution system with corroded iron pipes, the low toxic NO3- may increase toxicity risks via N-DBP formation.

Understanding the role of sorption and biodegradation in the removal of organic micropollutants by membrane aerated biofilm reactor (MABR) with different biofilm thickness

The role of sorption and biodegradation in a membrane aerated biofilm reactor (MABR) were investigated for the removal of 10 organic micropollutants (OMPs) including endocrine disruptors and pharmaceutical active compounds. The influence of the biofilm thickness on the mechanisms of removal was analyzed via kinetic test at three different stages. At all biofilm stages, biodegradation was demonstrated to dominate the removal of selected OMPs. Higher OMPs rates of removal via biodegradation (K_biol) were achieved when biofilm increased its thickness from (stage T1) 0.26 mm, to (stage T2) 0.58 mm and (stage T3) 1.03 mm. At stage T1 of biofilm, heterotrophs contribute predominantly to OMPs degradation. Hydrophilic compounds removal (i.e., acetaminophen) continue to be driven by heterotrophic bacteria at the next stages of biofilm thickness. However, for medium hydrophobic neutral and charged OMPs, the combined action of heterotrophic and enriched nitrifying activity at stages T2 and T3 enhanced the overall removal. A degradation pathway based on heterotrophic activity for acetaminophen and combined action of nitrifiers-heterotrophs for estrone was proposed based on identified metabolites. Although biodegradation dominated the removal of most OMPs, sorption was also observed to be essential in the removal of biologically recalcitrant and lipophilic compounds like triclosan. Furthermore, sorption capacity of apolar compound was enhanced as the biofilm thickness grew and increased in EPS protein fraction. Microbial analysis confirmed the higher abundance of nitrifying and denitrifying activity at stage T3 of biofilm, which not only facilitated near complete ammonium removal but also enhanced degradation of OMPs.

Nanomaterials: a review of emerging contaminants with potential health or environmental impact

Nanotechnologies have been advantageous in many sectors and gaining much concern due to the unique physical, chemical and biological properties of nanomaterials (NMs). We have surveyed peer-reviewed publications related to "nanotechnology", "NMs", "NMs water treatment", "NMs air treatment", and "NMs environmental risk" in the last 23 years. We found that most of the research work is focused on developing novel applications for NMs and new products with peculiar features. In contrast, there are relatively few of publications concerning NMs as environmental contaminants relative to that for NMs applications. Thus, we devoted this review for NMs as emerging environmental contaminants. The definition and classification of NMs will be presented first to demonstrate the importance of unifying the NMs definition. The information provided here should facilitate the detection, control, and regulation of NMs contaminants in the environment. The high surface-area-to-volume ratio and the reactivity of NMs contaminants cause the prediction of the chemical properties and potential toxicities of NPs to be extremely difficult; therefore, we found that there are marked knowledge gaps in the fate, impact, toxicity, and risk of NMs. Consequently, developing and modifying extraction methods, detection tools, and characterization technologies are essential for complete risk assessment of NMs contaminants in the environment. This will help also in setting regulations and standards for releasing and handling NMs as there are no specific regulations. Finally, the integrated treatment technologies are necessary for the removal of NMs contaminants in water. Also, membrane technology is recommended for NMs remediation in air.

Crystallinity engineering for overcoming the activity-stability tradeoff of spinel oxide in Fenton-like catalysis

A precise modulation of heterogeneous catalysts in structural and surface properties promises the development of more sustainable advanced oxidation water purification technologies. However, while catalysts with superior decontamination activity and selectivity are already achievable, maintaining a long-term service life of such materials remains challenging. Here, we propose a crystallinity engineering strategy to break the activity-stability tradeoff of metal oxides in Fenton-like catalysis. The amorphous/crystalline cobalt-manganese spinel oxide (A/C-CoMnOx) provided highly active, hydroxyl group-rich surface, with moderate peroxymonosulfate (PMS)-binding affinity and charge transfer energy and strong pollutant adsorption, to trigger concerted radical and nonradical reactions for efficient pollutant mineralization, thereby alleviating the catalyst passivation by oxidation intermediate accumulation. Meanwhile, the surface-confined reactions, benefited from the enhanced adsorption of pollutants at A/C interface, rendered the A/C-CoMnOx/PMS system ultrahigh PMS utilization efficiency (82.2%) and unprecedented decontamination activity (rate constant of 1.48 min-1) surpassing almost all the state-of-the-art heterogeneous Fenton-like catalysts. The superior cyclic stability and environmental robustness of the system for real water treatment was also demonstrated. Our work unveils a critical role of material crystallinity in modulating the Fenton-like catalytic activity and pathways of metal oxides, which fundamentally improves our understanding of the structure-activity-selectivity relationships of heterogeneous catalysts and may inspire material design for more sustainable water purification application and beyond.

Enhanced formation of haloacetonitriles during chlorination with bromide: Unveiling the important roles of organic bromamines

The formation of brominated disinfection byproducts (Br-DBPs) is an emerging issue in drinking water disinfection because its toxicity is tens to hundreds of times higher than that of chlorinated analogues and because of the widespread presence of bromide in source water. However, the mechanism and pathways of Br-DBPs formation remain unclear. In this study, we used glycine, alanine, and serine as model precursors and observed that brominated haloacetonitriles (Br-HANs) were more likely to be formed than brominated trihalomethanes. The results showed that there is not only one important way to HAN formation in the presence of bromide. We propose that organic bromamines, similar to organic chloramines, play a significant role in the formation of Br-HANs. Both the experimental and theoretical results confirmed that the decay of organic bromamines was faster than that of organic chloramines, which verified our assumption. The effect of the pH was investigated to further confirm the role of organic bromamines. In addition, we found that the formation of Br-HANs was significantly inhibited when monochloramine was used as a disinfectant, because the formation of organic bromamines was blocked. However, the formation of Br-HANs was promoted during the UV/chlorine process because of the faster decay of organic bromamines under UV photolysis. Overall, our study reveals the formation mechanism of Br-HANs and provides an alternative method to prevent Br-HAN formation.

Radiolabelling and in vivo radionuclide imaging tracking of emerging pollutants in environmental toxicology: A review

Emerging pollutants (EPs) have become a global concern, attracting tremendous attention because of serious threats to human and animal health. EP diversity emanates from their behaviour and ability to enter the body via multiple pathways and exhibit completely different distribution, transport, and excretion. To better understand the in vivo behaviour of EPs, we reviewed radiolabelling and in vivo radionuclide imaging tracking of various EPs, including micro- and nano-plastics, perfluoroalkyl substances, metal oxides, pharmaceutical and personal care products, and so on. Because this accurate and quantitative imaging approach requires the labelling of radionuclides onto EPs, the main strategies for radiolabelling were reviewed, such as synthesis with radioactive precursors, element exchange, proton beam activation, and modification. Spatial and temporal biodistribution of various EPs was summarised in a heat map, revealing that the absorption, transport, and excretion of EPs are markedly related to their type, size, and pathway into the body. These findings implicate the potential toxicity of diverse EPs in organs and tissues. Finally, we discussed the potential and challenges of radionuclide imaging tracking of EPs, which can be considered in future EPs studies.

Estimation of Per- and Polyfluorinated Alkyl Substance Induction Equivalency Factors for Humpback Dolphins by Transactivation Potencies of Peroxisome Proliferator-Activated Receptors

The potential risks of per- and polyfluoroalkyl substance (PFAS) accumulation in nearshore dolphins are not well understood. Here, transcriptional activities of 12 PFAS on peroxisome proliferator-activated receptors (PPAR-α, -β/δ, and -γ) in Indo-Pacific humpback dolphins (Sousa chinensis) were evaluated. All PFAS activated scPPAR-α in a dose-dependent manner. PFHpA exhibited the highest induction equivalency factors (IEFs). The order of IEFs for other PFAS was as follows: PFOA > PFNA > PFHxA > PFPeA > PFHxS > PFBA > PFOS > PFBuS ≈ PFDA ≫ PFUnDA and PFDoDA (not activated). The total induction equivalents (∑IEQs, 5537 ng/g wet weight) indicated that more attention should be paid to investigating contamination levels in dolphins, especially in PFOS (82.8% contribution to the ∑IEQs). The scPPAR-β/δ and -γ were not affected by any PFAS, except for PFOS, PFNA, and PFDA. Furthermore, PFNA and PFDA could induce higher PPAR-β/δ and PPAR-γ-mediated transcriptional activities than PFOA. Compared to human beings, PFAS might be more potent PPAR-α activators in humpback dolphins, suggesting that the dolphins may be more susceptible to the adverse effects of PFAS. Our results may be instructive for understanding the impacts of PFAS on marine mammal health due to the identical PPAR ligand-binding domain.

In vitro bioanalytical assessment of the occurrence and removal of bioactive chemicals in municipal wastewater treatment plants in Korea

Effluents of wastewater treatment plants (WWTPs) contain various organic micropollutants, some of which can exert negative effects on the quality of receiving waters or drinking water sources. This study monitored two full-scale WWTPs in Korea for the occurrence and removal of bioactive chemicals for a one-year period using a battery of in vitro bioassays as a complementary approach to chemical analysis. Bioassays covering different endpoints were employed, such as hormone receptor activation (AR and ERα), xenobiotic metabolism (PAH and PXR), oxidative stress response (Nrf2), and cytotoxicity. The WWTP influents showed AR, ERα, and PAH activities at ng/L - μg/L and PXR and Nrf2 activities at μg/L - mg/L as bioanalytical equivalent concentrations of a reference compound for each bioassay. These bioactivities decreased along with the WWTP treatment train, with significant removals achieved by the secondary biological treatment processes. Cytotoxicity was observed only for some municipal wastewater (M-WWTP) influents but was below the limit of quantification for most cases. The influent and effluent bioactivities observed in this study were mostly comparable to those reported in other WWTPs in the literature. Comparison of the bioactivities with the effect-based trigger (EBT) values indicates that the impact of WWTP effluents on receiving water quality was low for most endpoints. For Nrf2, however, further investigation is required to evaluate the observed high bioactivities compared with the current EBT. The observed ERα activity could partly be explained by the presence of some steroid estrogens. Overall, our results contribute to an important database for the concentrations and removal efficiencies of bioactive chemicals in WWTPs and demonstrate bioassays as a useful tool for urban water quality monitoring.

First insight into the development of a new transcriptomic tool in French Corsica harbors

Coastal harbor areas are subjected to a myriad of contamination sources with largely unknown effects. Such complex chemical mixtures are difficult to monitor but transcriptomics is a promising approach for such biomonitoring. The present study was designed to verify the use of the Coastal Biosensor for Endocrine Disruption (C-BED) assay, previously developed to detect emerging contaminants and their effects on Mytilus edulis, on another mussel species, Mytilus galloprovincialis. Mussels were caged on St-Florent harbor (contaminated) and on Revellata Bay (reference) for three months. A classical multibiomarkers approach was coupled to the C-BED assay. The results of both approaches were analysed using the Integrated Biomarkers Responses (IBR) and compared to each other. Both approaches demonstrated a higher contamination and probable endocrine disruption of mussels in St-Florent, compared to the reference station. These results confirm that the C-BED assay provides an innovative method to expand our ability to detect emerging contaminants.

Environmental Fate of Organic Sunscreens during Water Disinfection Processes: The Formation of Degradation By-Products and Their Toxicological Profiles

The development of any commercial product should also be aimed at reducing the risk associated with it, according to the safe-by-design concept; that is, risk assessment should always be at the center of the design, and the impact on human and environmental health should be assessed and eliminated during the product development phase and not afterwards. Unfortunately, even today, most operators in any production sector implement the philosophy of “risk management” or rather of managing the problem when it occurs, using spot interventions instead of changing the approach. This argument is also valid in the production of solar filters, which have reached a satisfactory degree of efficiency in the face of a substantial underestimation of the risks associated with their possible environmental fate. In fact, solar filters have been found in bathing waters and their environmental fate may depend on various factors such as the pH of the water, the presence of organic material, metal ions and light, and, above all, the chemical agents used in the disinfection of the water itself. Thus, during disinfection processes, the generation of dozens of products with a lower molecular weight and generally of an aromatic nature has been tested, where some of them did not receive an exact structural definition and a precise evaluation of their precise toxicological profile. Therefore, it is interesting to draw a complete picture of organic sunscreens and of the byproducts obtained under different conditions and their related ecotoxicological profile.

FT-ICR/MS deciphers formation of unknown macromolecular disinfection byproducts from algal organic matters after plasma oxidation

Algal organic matter (AOM) is a potential precursor of disinfection byproducts (DBPs) in water treatment. It is a major challenge to identify macromolecular DBPs due to the diversity of AOM. In this study, Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR/MS) was applied to diagnose the AOM diversity after algae removal by plasma oxidation and to recognize the macromolecular DBPs in subsequent chlorination. Significant removal of AOM released by M. aeruginosa, C. raciborskii, and A. spiroies was achieved by plasma oxidation, accompanied by decrease in the proportion of CHNO formulas and increase in CHO formulas. Without plasma treatment, chlorination generated approximately 2486 macromolecular carbonaceous DBPs (C-DBPs) and 1984 nitrogenous DBPs (N-DBPs), with C₁₁H_nO_mCl_x and C₁₈H_nN_mO_zCl_x as the most abundant DBPs. The numbers of C-DBPs and N-DBPs decreased by 63.3% and 62.9%, respectively, if plasma treatment was applied prior to chlorination. Network computational analysis revealed that Cl substitution was the main formation pathway of AOM-derived DBP formation rather than HOCl addition. The precursors of macromolecular DBPs contained a characteristic atomic number of C and O (7 ≤ C ≤ 18; 3 ≤ O ≤ 11). This study firstly disclosed the relationship between AOM diversity and novel macromolecular DBPs during algae-laden water treatment.

Photocatalytic Degradation of Paracetamol in Aqueous Medium Using TiO2 Prepared by the Sol–Sel Method

Two titania photocatalysts have been prepared using the sol-gel method using TiCl4 as a precursor, and two different alcohols, namely, ethanol or propanol (Et or Pr). The main aim of this work was to study the effect of the nature of the alcohol on the chemical, structural and photocatalytic properties for paracetamol photodegradation of the final solids. The TiCl4/alcohol molar ratio to obtain the corresponding alkoxides (TiEt and TiPr) was 1/10. These alkoxides were calcined at 400 °C to prepare the oxide catalysts (named as TiEt400 and TiPr400). Powder X-ray diffraction (PXRD) of the original samples showed the presence of anatase diffraction peaks in sample TiPr, while TiEt is a completely amorphous material. Contrary to commercial TiO2-P25, the PXRD diagrams of the calcined samples showed anatase as the exclusive crystalline phase in both solids. The specific surface area (SBET) of sample TiPr400 was larger than that of sample TiEt400, and both larger than that of TiO2-P25. The three solids have been tested in the photodegradation of paracetamol in aqueous solution. It has been established that the alcohol used influences the properties and catalytic activity of the final oxides. The synthesized solids exhibit a higher activity than commercial TiO2-P25, because of their structural characteristics and larger SBET.

Preparation of functional material layers of TT-COFs with built-in formyl groups for efficient dyes removal

There is no doubt that the wide application of COFs depends on the diversity and complexity of their structure and composition, as well as the feasibility and convenience of use. Herein, large area defect-free continuous functional material layers have been fabricated by compounding sub-stoichiometric tetratopic-tritopic covalent organic frameworks (TT-COFs) on graphene oxide (GO) via simply hot pressing. The one-step synthesis of TT-COFs with built-in formyl groups endowed the robust material layers with extraordinary host-guest interactions, so they can specifically reject cations dyes according to adsorption effect, molecular sieving and Donnan effect. Owing to the through-plane molecular transfer channels, large amounts of water molecules can pass through the internal channel rapidly. As a result, high rejection of 99.5% and large flux of 309.99 L·m^-2·h^-1·bar^-1 for dye molecules have been realized. This simple and effective method provided more extensive practicality and greater convenience in recycling and reuse, and demonstrated the utility and high efficiency of TT-COFs with built-in formyl groups as an advanced material platform for dyes removal.

Multifunctional Membranes-A Versatile Approach for Emerging Pollutants Removal

This paper presents a comprehensive literature review surveying the most important polymer materials used for electrospinning processes and applied as membranes for the removal of emerging pollutants. Two types of processes integrate these membrane types: separation processes, where electrospun polymers act as a support for thin film composites (TFC), and adsorption as single or coupled processes (photo-catalysis, advanced oxidation, electrochemical), where a functionalization step is essential for the electrospun polymer to improve its properties. Emerging pollutants (EPs) released in the environment can be efficiently removed from water systems using electrospun membranes. The relevant results regarding removal efficiency, adsorption capacity, and the size and porosity of the membranes and fibers used for different EPs are described in detail.

Remote Laser Induced Fluorescence of Soils and Rocks

The laser induced fluorescence spectroscopy was systematically utilized for remote sensing of different soils and rocks for the first time, to the best of our knowledge. Laser induced fluorescence spectroscopy measurements were carried out by the developed nanosecond LIDAR instrument with variable excitation wavelength (355, 532 and 1064 nm). LIDAR sensing of different Brazil soil samples have been carried out in order to construct a spectral database. The laser induced fluorescence spectra interpretation for different samples has been discussed in detail. The perspectives of LIDAR sensing of organic samples deposited at soils and rock have been discussed including future space exploration missions in the search for extraterrestrial life.

Emerging Contaminants in Seafront Zones. Environmental Impact and Analytical Approaches

Some chemical substances have the potential to enter the coastal and marine environment and cause adverse effects on ecosystems, biodiversity and human health. For a large majority of them, their fate and effects are poorly understood as well as their use still unregulated. Finding effective and sustainable strategies for the identification of these emerging and/or anthropogenic contaminants that might cause polluting effects in marine environments to mitigate their adverse effects, is of utmost importance and a great challenge for managers, regulators and researchers. In this review we will evaluate the impact of emerging contaminants (ECs) on marine coastal zones namely in their ecosystems and biodiversity, highlighting the potential risks of organic pollutants, pharmaceuticals and personal care products. Emerging microextraction techniques and high-resolution analytical platforms used in isolation, identification and quantification of ECs will be also reviewed.

Toward Scaling-Up Photocatalytic Process for Multiphase Environmental Applications

Recently, we have witnessed a booming development of composites and multi-dopant metal oxides to be employed as novel photocatalysts. Yet the practical application of photocatalysis for environmental purposes is still elusive. Concerns about the unknown fate and toxicity of nanoparticles, unsatisfactory performance in real conditions, mass transfer limitations and durability issues have so far discouraged investments in full-scale applications of photocatalysis. Herein, we provide a critical overview of the main challenges that are limiting large-scale application of photocatalysis in air and water/wastewater purification. We then discuss the main approaches reported in the literature to tackle these shortcomings, such as the design of photocatalytic reactors that retain the photocatalyst, the study of degradation of micropollutants in different water matrices, and the development of gas-phase reactors with optimized contact time and irradiation. Furthermore, we provide a critical analysis of research–practice gaps such as treatment of real water and air samples, degradation of pollutants with actual environmental concentrations, photocatalyst deactivation, and cost and environmental life-cycle assessment.

Comparative acute toxicity of benzophenone derivatives and bisphenol analogues in the Asian clam Corbicula fluminea

Among UV-filters, benzophenones are one of the most abundantly used and detected groups in the environment. Bisphenols are also one of the most widely used chemicals in plastics, but their demonstrated deleterious effects on several organisms and humans have led to the production of alternative analogues. However, few comparative studies on the ecotoxicological effects of these derivatives or analogues have been carried out. The present study aimed to investigate the effects of two benzophenones (BP-3 and BP-4) and two bisphenols (BPA and BPS) in a short-term exposure of the freshwater endobenthic bivalve Corbicula fluminea. Clams were exposed for 96 h to several concentrations of the four pollutants: BP-3 (0.63; 1.25; 2.5; 5 mg l^-1), BP-4 (4.75; 9.5; 19; 38 mg l^-1), BPA (3.75; 7.5; 15; 30 mg l^-1), and BPS (2.5; 5; 10; 20 mg l^-1). The comparative acute toxicity of these pollutants was evaluated by the analysis of the post-exposure filtering capacity of clams, lipid peroxidation (LP) levels and the activity of the antioxidant enzymes catalase (CAT) and glutathione reductase (GR). After the exposure period, except for BP-4, the chemicals tested seemed to be detected by clams and provoked valve closure, decreasing filter-feeding in a concentration-dependent manner. Furthermore, C. fluminea exposed to the highest concentrations of BP-3, BP-4 and BPA showed a significant increase in LP, CAT and GR activities with respect to their controls. BP-3 and BPA were the most toxic compounds showing significant differences in all the parameters analysed at the highest concentrations assayed. However, clams exposed to BPS showed only significant alterations in filtration parameters and in GR activity, in the two highest concentrations tested, indicating that this compound was the least toxic to clams. Obtained results highlight the importance of investigating the effects that emerging pollutants have on aquatic organisms.

New methods for identification of disinfection byproducts of toxicological relevance: Progress and future directions

Disinfection byproducts (DBPs) represent a ubiquitous source of chemical exposure in disinfected water. While over 700 DBPs have been identified, the drivers of toxicity remain poorly understood. Additionally, ever evolving water treatment practices have led to a continually growing list of DBPs. Advancement of analytical technologies have enabled the identification of new classes of DBPs and the quantification of these chemically diverse sets of DBPs. Here we summarize advances in new workflows for DBP analysis, including sample preparation, chromatographic separation with mass spectrometry (MS) detection, and data processing. To aid in the selection of techniques for future studies, we discuss necessary considerations for each step in the strategy. This review focuses on how each step of a workflow can be optimized to capture diverse classes of DBPs within a single method. Additionally, we highlight new MS-based approaches that can be powerful for identifying novel DBPs of toxicological relevance. We discuss current challenges and provide perspectives on future research directions with respect to studying new DBPs of toxicological relevance. As analytical technologies continue to advance, new strategies will be increasingly used to analyze complex DBPs produced in different treatment processes with the aim to identify potential drivers of toxicity.

Carbene-based Difluoromethylation of Bisphenols: Application to the Instantaneous Tagging of Bisphenol A in Spiked Soil for Its Detection and Identification by Electron Ionization Gas Chromatography-Mass Spectrometry

The rapid and efficient difluoromethylation of a panel of eleven bisphenols (BPs) for their enhanced detection and identification by Electron-Ionization Gas Chromatography-Mass Spectrometry (EI-GC-MS) is presented. The derivatization employs the inexpensive, environmentally benign agent diethyl (bromodifluoromethyl) phosphonate (DBDFP) as a difluorocarbene-generating species that converts the BPs into bis-difluoromethylated ethers that can be detected and identified by GC-MS means. Key attributes of the protocol include its extreme rapidity (30 seconds) at ambient temperature, high specificity for BPs amidst other alcohol-containing analytes, and its biphasic nature that allows for its convenient adaptation to the analysis of BPs in organic as well as aqueous matrices. The protocol furnishes stable, novel BP ethers armed with a total of four fluorine atoms for their subsequent analysis by EI-GC-MS. Furthermore, each derivatized bisphenol exhibits unique retention times vastly different from their native counterparts leading to their unequivocal identification. The effectiveness and robustness of the developed methodology was applied to the tagging of the most famous member of this family of compounds, bisphenol-A (BPA), when spiked (at 1 μg.g⁻¹ concentration) in the physically and compositionally complex Nebraska EPA standard soil. The method detection limit (MDL) for the bis-difluoromethylated BPA was determined to be 0.01 μg.mL⁻¹. The bis-difluoromethylated BPA was conveniently detected on the organic layers from the biphasic, derivatized mixtures, highlighting the protocol’s practicality and utility in the rapid, qualitative detection of this endocrine disruptor during environmental analysis.

Alterations to DNA, apoptosis and oxidative damage induced by sucralose in blood cells of Cyprinus carpio

Sucralose (SUC) is an organochlorine that is used as a common sweetener in different dietary products around the world. Its extended use and production have led to this product is released into the environment in concentrations ranging from ng L^-1 to μg L^-1 in surface waters, groundwaters, wastewater treatment plants and ocean waters. A previous study carried out by our research team demonstrated that SUC is capable of inducing oxidative stress in Cyprinus carpio at environmentally-relevant concentrations. The aim of this study was to evaluate if SUC was capable of inducing alterations to DNA, apoptosis, and oxidative damage in the blood cells of C. carpio. Carps were exposed to two environmentally-relevant concentrations (0.05 and 155 μg L^-1) of SUC, and the following biomarkers were determined: comet assay, micronucleus test (MN), caspase-3 activity, TUNEL assay, hydroperoxide content, lipid peroxidation level, protein carbonyl content and superoxide dismutase and catalase activities. Results obtained showed that SUC is capable of inducing DNA damage. A maximum increase of 35% and 23% were observed for c1 and c2, respectively in the comet assay; increases of 586% and 507.7% for c1 and c2, respectively, were found at 72 h through the MN test. The activity of caspase-3 showed a greater response for c1 and c2 at 96 h, with 271% and 493.5%, respectively. TUNEL assay also showed the highest response at 96 h, with 51.8 for c1 and 72.9 for c2; c1 y c2 were able to induce oxidative stress with the highest expression at 72 h. A correlation between DNA damage biomarkers, apoptosis and plasma levels of SUC in both concentrations were observed. With the data obtained, we can conclude that SUC, at environmentally-relevant concentrations, was capable of generating DNA alterations, apoptosis and oxidative stress in blood cells in common carp.

Predicting partitioning of radiolabelled 14C-PFOA in a range of soils using diffuse reflectance infrared spectroscopy

The aim of this study was to establish partitioning coefficients (K_d) of perfluorooctanoic acid (PFOA) in a wide range of soils and determine if those values can be predicted from soil properties using multiple linear regression (MLR) and from infrared spectra of soils using partial least squares regression (PLSR). For 100 different soils, the K_d values of spiked radiolabelled ¹⁴C-PFOA ranged from 0.6 to 14.8 L/kg and significantly decreased with soil depth (p < 0.05) due to soil properties that change with depth. The MLR modelling revealed that PFOA sorption was significantly (p < 0.05) influenced, in decreasing order, by organic carbon (OC) content, silt-plus-clay content and soil pH. Soils were partitioned into all soils and surface soils alone. The MLR models using OC, silt-plus-clay content and pH together explained most of the variation in sorption in all soils as well as surface soils alone (0-15 cm). However, correlations between soil properties and K_d values in some soils could not be explained by the MLR model. Modelling of K_d prediction in soils with PLSR and diffuse reflectance (mid) infrared Fourier transform spectroscopy (DRIFT) showed comparable success in explaining the predictions of K_d values, including some of the outliers identified in the MLR model. The PLSR loading weights suggested that quartz, and possibly pyrophyllite minerals, were inversely correlated with the K_d values. Given that MLR requires a-priori characterisation of a range of soil properties and PLSR-DRIFT is a method based on the direct relationship between spectra and soil components, mid-infrared spectroscopy may be a more economical and rapid technique to predict the solid-liquid partitioning of PFOA in soils.

A Review of Recent Advances of Dielectric Barrier Discharge Plasma in Catalysis

Dielectric barrier discharge plasma is one of the most popular methods to generate nanthermal plasma, which is made up of a host of high-energy electrons, free radicals, chemically active ions and excited species, so it has the property of being prone to chemical reactions. Due to these unique advantages, the plasma technology has been widely used in the catalytic fields. Compared with the conventional method, the heterogeneous catalyst prepared by plasma technology has good dispersion and smaller particle size, and its catalytic activity, selectivity and stability are significantly improved. In addition, the interaction between plasma and catalyst can achieve synergistic effects, so the catalytic effect is further improved. The review mainly introduces the characteristics of dielectric barrier discharge plasma, development trend and its recent advances in catalysis; then, we sum up the advantages of using plasma technology to prepare catalysts. At the same time, the synergistic effect of plasma technology combined with catalyst on methanation, CH₄ reforming, NO_x decomposition, H₂O₂ synthesis, Fischer–Tropsch synthesis, volatile organic compounds removal, catalytic sterilization, wastewater treatment and degradation of pesticide residues are discussed. Finally, the properties of plasma in catalytic reaction are summarized, and the application prospect of plasma in the future catalytic field is prospected.

Could benthic biofilm analyses be used as a reliable proxy for freshwater environmental health?

The quality of freshwater undoubtedly reflects the health of our surrounding environment, society, and economy, as these are supported by various freshwater ecosystems. Monitoring efforts have therefore been considered a vital means of ensuring the ecological health of freshwater environments. Nevertheless, most aquatic environmental monitoring strategies largely focus on bulk water sampling for analysis of physicochemical and key biological indicators, which for the most part do not consider pollution events that occur at any time between sampling events. Because benthic biofilms are ubiquitous in aquatic environments, pollution released during sporadic events may be absorbed by these biofilms, which can act as repositories of pollutants. The aim of this study was to assess whether benthic biofilm monitoring could provide an efficient way of properly characterizing the extent of pollution in aquatic environments. Here, bulk water and benthic biofilms were sampled from three Hong Kong streams having various pollution profiles, and subsequently compared via high-resolution microscopy, metagenomic analysis, and analytical chemistry. The results indicated that biofilms were, indeed, reservoirs of environmental pollutants, having different profiles compared with that of the corresponding bulk water samples. Moreover, the results also suggested that biofilms sampled in polluted areas were characterized by a higher species richness. While the analytical testing of benthic biofilms still needs further development, the integration of chemical-pollutant profiles and biofilm sequencing data in future studies may provide unique perspectives for understanding and identifying pollution-related biofilm biomarkers.