An Evidence Synthesis of Pharmaceuticals and Personal Care Products (PPCPs) in the Environment: Imbalances among Compounds, Sewage Treatment Techniques, and Ecosystem Types

Efficient removal of ciprofloxacin from waste activated sludge by electroactivation of peroxymonosulfate

The waste activated sludge (WAS) generated from sewage treatment accumulates antibiotics including ciprofloxacin (CIP), which may be released into the environments if WAS is not handled properly. Therefore, there is a need to develop technologies aiming at removing CIP from sludge. In this study, electrically activated peroxymonosulfate (E/PMS) was investigated to remove CIP from WAS. The optimal conditions for the degradation of CIP in sludge by E/PMS were determined by response surface methodology (RSM) simulations combined with experimental validation. The highest CIP removal level of 93.8% was achieved in 10 min at a dosage of 250 mg/g dry solid (DS) PMS, and an electrolysis voltage of 23 V. E/PMS facilitated the generation of radicals involved in the elimination of CIP. The contribution of free radicals showed that SO4 •- is more important than HO• in this process. A degradation pathway for CIP in sludge was proposed based on the detected byproducts and density functional theory (DFT) calculations. The E/PMS process also promoted sludge disintegration, dewatering, heavy metal removal, and morphological transformation. The total content of all six heavy metals decreased, with As and Cr being converted into more stable forms, thereby reducing their leaching rates. The E/PMS process also reduced the toxicity of the sludge filtrate. Finally, the analysis of economic feasibility and energy consumption showed that E/PMS has a significant potential for controlling antibiotics and promoting the harmlessness of sludge. PRACTITIONER POINTS: Effective removal of ciprofloxacin (CIP) from waste activated sludge by electrically activated peroxymonosulfate (E/PMS). Reaction time has little effect on CIP removal from sludge. The degradation sites of CIP in sludge were the piperazine ring, the quinolone fraction, and the cyclopropyl. Promotion of sludge decomposition and dewatering, heavy metal stabilization, and decrease of sludge filtrate toxicity by the E/PMS process.

Removal of Ibuprofen in Water by Bioaugmentation with Labrys neptuniae CSW11 Isolated from Sewage Sludge-Assessment of Biodegradation Pathway Based on Metabolite Formation and Genomic Analysis

Ibuprofen (IBP) is one of the most consumed drugs in the world. It is only partially removed in wastewater treatment plants (WWTPs), being present in effluent wastewater and sewage sludge, causing the widespread introduction of IBP as an emergent xenobiotic in different environmental compartments. This study describes the use of Labrys neptuniae CSW11, recently described as an IBP degrader, through bioaugmentation processes for the removal of IBP from water under different conditions (additional carbon sources, various concentrations of glucose and IBP). L. neptuniae CSW11 showed very good results in a wide range of IBP concentrations, with 100% removal in only 4 days for 1 and 5 mg L-1 IBP and 7 days for 10 mg L-1, and up to 48.4% removal in 28 days for IBP 100 mg L-1 when using glucose 3 g L-1 as an additional carbon source. Three IBP metabolites were identified during the biotransformation process: 1-hydroxyibuprofen (1-OH-IBP), 2-hydroxyibuprofen (2-OH-IBP), and carboxyibuprofen (CBX-IBP), whose concentrations declined drastically in the presence of glucose. IBP metabolites maintained a certain degree of toxicity in solution, even when IBP was completely removed. The results indicate that L. neptuniae CSW11 can be quite effective in degrading IBP in water, but the bioaugmentation method should be improved using CSW11 in consortia with other bacterial strains able to degrade the toxic metabolites produced. A genome-based analysis of L. neptuniae CSW11 revealed different enzymes that could be involved in IBP biodegradation, and a potential metabolic pathway was proposed based on the metabolites observed and genome analysis.

Pharmaceuticals and personal care product modelling: Unleashing artificial intelligence and machine learning capabilities and impact on one health and sustainable development goals

The presence of pharmaceutical and personal care products (PPCPs) in the environment poses a significant threat to environmental resources, given their potential risks to ecosystems and human health, even in trace amounts. While mathematical modelling offers a comprehensive approach to understanding the fate and transport of PPCPs in the environment, such studies have garnered less attention compared to field and laboratory investigations. This review examines the current state of modelling PPCPs, focusing on their sources, fate and transport mechanisms, and interactions within the whole ecosystem. Emphasis is placed on critically evaluating and discussing the underlying principles, ongoing advancements, and applications of diverse multimedia models across geographically distinct regions. Furthermore, the review underscores the imperative of ensuring data quality, strategically planning monitoring initiatives, and leveraging cutting-edge modelling techniques in the quest for a more holistic understanding of PPCP dynamics. It also ventures into prospective developments, particularly the integration of Artificial Intelligence (AI) and Machine Learning (ML) methodologies, to enhance the precision and predictive capabilities of PPCP models. In addition, the broader implications of PPCP modelling on sustainability development goals (SDG) and the One Health approach are also discussed. GIS-based modelling offers a cost-effective approach for incorporating time-variable parameters, enabling a spatially explicit analysis of contaminant fate. Swin-Transformer model enhanced with Normalization Attention Modules demonstrated strong groundwater level estimation with an R2 of 82 %. Meanwhile, integrating Interferometric Synthetic Aperture Radar (InSAR) time-series with gravity recovery and climate experiment (GRACE) data has been pivotal for assessing water-mass changes in the Indo-Gangetic basin, enhancing PPCP fate and transport modelling accuracy, though ongoing refinement is necessary for a comprehensive understanding of PPCP dynamics. The review aims to establish a framework for the future development of a comprehensive PPCP modelling approach, aiding researchers and policymakers in effectively managing water resources impacted by increasing PPCP levels.

Occurrence and risks of PPCPs of a typical mountainous region: Implications for sustainable urban water systems

Urban wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs) play vital roles in the urban water cycle, ensuring access to safe drinking water and maintaining aquatic ecosystems. This study comprehensively assessed the occurrence and risks of pharmaceuticals and personal care products (PPCPs) in urban WWTPs and DWTPs. Our findings revealed widespread PPCPs presence, with concentrations ranging from <1 ng/L to several thousand ng/L. Significant regional disparities in occurrence and composition were observed linked to population types and economic structures. Furthermore, strong correlations were observed between DWTPs and WWTPs indicating consistent transport and transformation patterns of PPCPs within the urban water cycle. Approximately two-thirds of PPCPs were degraded post-WWTP treatment, with about one-tenth persisting in drinking water following surface water dilution and purification processes. Thus, we suggested that controlling the total concentration of the five priority PPCPs in the effluent from the WWTP to <1100 ng/L have potential to reduce the environmental and health risk of PPCPs. Additionally, this research identified influential water quality parameters, such as pH, dissolved oxygen, and temperature, through redundancy analysis. This research underscores the importance of establishing emission standards to mitigate PPCP-related risks and supports sustainable urban water system advancement.

Method development and optimization for dispersive liquid-liquid microextraction factors using the response surface methodology with desirability function for the ultra-high performance liquid chromatography quadrupole time of flight mass spectrometry determination of organic contaminants in water samples: risk and greenness assessment

A simple, cost effective, and efficient dispersive liquid-liquid microextraction method was developed and optimized for the determination of organic contaminants in different environmental water matrices followed by UHPLC-QTOF-MS analysis. In the preliminary experiments, the univariate optimization approach was used to select tetrachloroethylene and acetonitrile as extraction and disperser solvents, respectively. The significant factors influencing DLLME were screened using full factorial design, and the optimal values for each variable were then derived through further optimization using central composite design with desirability function. The optimal conditions were achieved with 195 μL of tetrachloroethylene as the extraction solvent, 1439 μL of acetonitrile as the disperser solvent, and a sample pH of 5.8. Under these conditions, the method provided detection limits ranging from 0.11-0.48 μg L-1 and recoveries ranging from 23.32-145.43% across all samples. The enrichment factors obtained ranged from 11.66-72.72. The proposed method was then successfully applied in real water samples. Only benzophenone was detected in the concentration range of 0.79-0.88 μg L-1 across all the water samples. The calculated risk quotient resulting from benzophenone exposure in water samples showed a low potential risk to human health and the aquatic ecosystem. The method was also evaluated for its environmental friendliness using various metrics tools such as Analytical Eco-Scale (AES), Green Analytical Procedure Index (GAPI), Analytical GREEnness (AGREE), Analytical Greenness for Sample Preparation (AGREEprep), and Sample Preparation Metric of Sustainability (SPMS). Only AES qualified the method as green while it was considered acceptable and sustainable when assessed using SPMS.

Removal efficiencies for 52 pesticides and pharmaceuticals from wastewater effluent by coupling solar heterogeneous photo-oxidation with TiO2 and infiltration in saturated soil column

Water resource management has become a hot button issue in recent decades. Countries facing water shortages as a result to climate change must adapt their water supply. The reuse of wastewater treatment plant effluents is becoming increasingly common around the world. However, the effluent quality must be improved before its reutilization to avoid contamination of the receiving environment. Pharmaceuticals and pesticides are particularly monitored because of their ubiquitous behaviours and limited removal by conventional wastewater treatment plants. The aim of this study was to combine heterogeneous photo-oxidation with TiO2 and soil infiltration to increase the elimination of contaminants of emerging concern (CECs). These advanced treatments were applied on an effluent coming from a WWTP equipped with a Ultrafor membrane bioreactor (sludge ages: 8-30 days, biomass concentration: 8-12 g.L-1, hydraulic retention: 6.7-8 h). The concentration of CECs was determined to evaluate the efficiency of coupling treatments. Photo-oxidation alone showed an impressive 98 % removal under spring conditions, while 66 % removal was observed under winter conditions. The differences observed for photo-oxidation were related to UV flux density, lower in winter than in spring (4.4 kJ.L-1 vs 6.6 kJ.L-1) and initial concentrations of the effluent higher in winter (50 μg.L-1 vs 26 μg.L-1). For both experiments, additional soil infiltration increased the global concentration of CECs removal to at least 89 % with equal removal contributions observed for some compounds. From the 52 CECs quantified in the WWTP effluent, at least 30 were totally removed by the advanced treatments while 4 compounds showed recalcitrant behaviours with global removal <60 %.

Effect, Fate and Remediation of Pharmaceuticals and Personal Care Products (PPCPs) during Anaerobic Sludge Treatment: A Review

Biomass energy recovery from sewage sludge through anaerobic treatment is vital for environmental sustainability and a circular economy. However, large amounts of pharmaceutical and personal care products (PPCPs) remain in sludge, and their interactions with microbes and enzymes would affect resource recovery. This article reviews the effects and mechanisms of PPCPs on anaerobic sludge treatment. Most PPCPs posed adverse impacts on methane production, while certain low-toxicity PPCPs could stimulate volatile fatty acids and biohydrogen accumulation. Changes in the microbial community structure and functional enzyme bioactivities were also summarized with PPCPs exposure. Notably, PPCPs such as carbamazepine could bind with the active sites of the enzyme and induce microbial stress responses. The fate of various PPCPs during anaerobic sludge treatment indicated that PPCPs featuring electron-donating groups (e.g., ·-NH2 and ·-OH), hydrophilicity, and low molecular weight were more susceptible to microbial utilization. Key biodegrading enzymes (e.g., cytochrome P450 and amidase) were crucial for PPCP degradation, although several PPCPs remain refractory to biotransformation. Therefore, remediation technologies including physical pretreatment, chemicals, bioaugmentation, and their combinations for enhancing PPCPs degradation were outlined. Among these strategies, advanced oxidation processes and combined strategies effectively removed complex and refractory PPCPs mainly by generating free radicals, providing recommendations for improving sludge detoxification.

Socio-environmental externalities of sewage waste management

Conventional sewage management is expensive and inefficient, putting the environment and public health at risk, making access to sewage services difficult for everyone. Reusing sewage waste has agricultural and economic potential, but can contain harmful contaminants if not treated properly. This review is based on the hypothesis that the destination of sewage waste generates environmental and social externalities, which have not yet been widely compared. With the aim of identifying, from the literature, the socio-environmental externalities generated by different sewage waste management approaches, a systematic review of the literature was carried out, including 244 documents, with 50 % of these discussing impacts of conventional treatment and 37 % analyzing the reuse of waste. The main impacts and externalities were evaluated in three situations: untreated sewage, treated sewage, and reused waste. The results indicate that sewage waste has an underutilized economic value and can generate revenue, reduce operational costs and electricity expenses. Six negative externalities generated by conventional sewage treatment were identified: health costs; environmental cleaning; carbon offsetting; damage to tourism; damage to fishing and agriculture; and real estate depreciation. In reuse, there is a risk of two negative externalities: health costs and environmental cleaning, but two positive externalities were also identified: the reduction of phosphate rock mining and the neutralization of carbon credits. The complexity of the transition to sustainable sewage treatment practices is highlighted given the lack of consensus on the safe use of sewage waste, the lack of regulatory standardization, implementation costs and differences in regional parameters, highlighting the need for preliminary experimentation in a multidisciplinary and contextualized approach, considering comparative externalities among the available sewage waste management possibilities.

Insights into copper(I) phenylacetylide with in-situ transformation of oxygen and enhanced visible-light response for water decontamination: Cu-O bond promotes exciton dissociation and charge transfer

The widespread contamination of hexavalent chromium (Cr(VI)), pharmaceuticals and personal care products (PPCPs), and dyes is a growing concern. necessitating the development of convenient and effective technologies for their removal. Copper(I) phenylacetylide (PhC2Cu) has emerged as a promising photocatalyst for environmental remediation. In this study, we introduced a functional Cu-O bond into PhC2Cu (referred to as OrPhC2Cu) by creatively converting the adsorbed oxygen on the surface of PhC2Cu into a Cu-O bond to enhance the efficiency of Cr(VI) photoreduction, PPCPs photodegradation, and dyes photodegradation through a facile vacuum activating method. The incorporation of the Cu-O bond optimized the electron structure of OrPhC2Cu, facilitating exciton dissociation and charge transfer. The exciton dissociation behavior and charge transfer mechanism were systematically investigated for the first time in the OrPhC2Cu system by photoelectrochemical tests, fluorescence and phosphorescence (PH) techniques, and density functional theory (DFT) calculations. Remarkably, the enhanced visible-light response of OrPhC2Cu improved photon utilization and significantly promoted the generation of reactive species (RSs), leading to the highly efficient Cr(VI) photoreduction (98.52% within 25 min) and sulfamethazine photodegradation (94.65% within 60 min), with 3.91 and 5.23 times higher activity compared to PhC2Cu. Additionally, the photocatalytic efficiency of OrPhC2Cu in degrading anionic dyes surpassed that of cationic dyes. The performance of the OrPhC2Cu system in treating electroplating effluent or natural water bodies suggests its potential for practical applications.

Unravelling the mechanisms of organic micropollutant removal in bio-electrochemical systems: Insights into sorption, electrochemical degradation, and biodegradation processes

Bio-electrochemical systems (BESs) have recently been proposed as an efficient treatment technology to remove organic micropollutants from water treatment plants. In this study, we aimed to differentiate between sorption, electrochemical transport/degradation, and biodegradation. Using electro-active microorganisms and electrodes, we investigated organic micropollutant removal at environmentally relevant concentrations, clarifying the roles of sorption and electrochemical and biological degradation. The role of anodic biofilms on the removal of 10 relevant organic micropollutants was studied by performing separate sorption experiments on carbon-based electrodes (graphite felt, graphite rod, graphite granules, and granular activated carbon) and electrochemical degradation experiments at two different electrode potentials (-0.3 and 0 V). Granular activated carbon showed the highest sorption of micropollutants; applying a potential to graphite felt electrodes increased organic micropollutant removal. Removal efficiencies >80 % were obtained for all micropollutants at high anode potentials (+0.955 V), indicating that the studied compounds were more susceptible to oxidation than to reduction. All organic micropollutants showed removal when under bio-electrochemical conditions, ranging from low (e.g. metformin, 9.3 %) to exceptionally high removal efficiencies (e.g. sulfamethoxazole, 99.5 %). The lower removal observed under bio-electrochemical conditions when compared to only electrochemical conditions indicated that sorption to the electrode is key to guarantee high electrochemical degradation. The detection of transformation products of chloridazon and metformin indicated that (bio)-electrochemical degradation occurred. This study confirms that BES can treat some organic micropollutants through several mechanisms, which merits further investigation.

Assessment of emerging and persistent contaminants in an anthropogenic-impacted watershed: Application using targeted, non-targeted, and in vitro bioassay techniques

Emerging and persistent contaminants (EPC) pose a significant challenge to water quality monitoring efforts. Effect-based monitoring (EBM) techniques provide an efficient and systematic approach in water quality monitoring, but they tend to be resource intensive. In this study, we investigated the EPC distribution for various land uses using target analysis (TA) and non-target screening (NTS) and in vitro bioassays, both individually and integrated, in the upper Ping River Catchment, northern Thailand. Our findings of NTS showed that urban areas were the most contaminated of all land use types, although agriculture sites had high unexpected pollution levels. We evaluated the reliability of NTS data by comparing it to TA and observed varying inconsistencies likely due to matrix interferences and isobaric compound interferences. Integrating NTS with in vitro bioassays for a thorough analysis posed challenges, primary due to a scarcity of concentration data for key compounds, and potentially additive or non-additive effects of mixture samples that could not be accounted for. While EBM approaches place emphasis on toxic sites, this study demonstrated the importance of considering non-bioactive sites that contain toxic compounds with antagonistic effects that may go undetected by traditional monitoring approaches. The present work emphasizes the importance of improving NTS workflows and ensuring high-quality EBM analyses in future water quality monitoring programs.

Wastewater reuse and pharmaceutical pollution in agriculture: Uptake, transport, accumulation and metabolism of pharmaceutical pollutants within plants

The presence of pharmaceutical pollutants in water sources has become a growing concern due to its potential impacts on human health and other organisms. The physicochemical properties of pharmaceuticals based on their intended therapeutical application, which include antibiotics, hormones, analgesics, and antidepressants, is quite diverse. Their presence in wastewater, sewerage water, surface water, ground water and even in drinking water is reported by many researchers throughout the world. Human exposure to these pollutants through drinking water or consumption of aquatic and terrestrial organisms has raised concerns about potential adverse effects, such as endocrine disruption, antibiotic resistance, and developmental abnormalities. Once in the environment, they can persist, undergo transformation, or degrade, leading to a complex mixture of contaminants. Application of treated wastewater, compost, manures or biosolids in agricultural fields introduce pharmaceutical pollutants in the environment. As pharmaceuticals are diverse in nature, significant differences are observed during their uptake and accumulation in plants. While there have been extensive studies on aquatic ecosystems, the effect on agricultural land is more disparate. As of now, there are few reports available on the potential of plant uptake and transportation of pharmaceuticals within and between plant organs. This review summarizes the occurrence of pharmaceuticals in aquatic water bodies at a range of concentrations and their uptake, accumulation, and transport within plant tissues. Research gaps on pharmaceutical pollutants' specific effect on plant growth and future research scopes are highlighted. The factors affecting uptake of pharmaceuticals including hydrophobicity, ionization, physicochemical properties (pKa, logKow, pH, Henry's law constant) are discussed. Finally, metabolism of pharmaceuticals within plant cells through metabolism phase enzymes and plant responses to pharmaceuticals are reviewed.

A robust self-regenerating graphene-based adsorbent for pharmaceutical removal in various water environments

The presence of active pharmaceutical ingredients (APIs) in wastewater effluents and natural aquatic systems threatens ecological and human health. While activated carbon-based adsorbents, such as GAC and PAC, are widely used for API removal, they exhibit certain deficiencies, including reduced performance due to the presence of natural organic macromolecules (NOMs) and high regeneration costs. There is growing demand for a robust, stable, and self-regenerative adsorbent designed for API removal in various environments. In this study, we synthesized a self-generating metal oxide nano-composite (S-MGC) containing titanium dioxide (TiO2) and silicon dioxide (SiO2) combined with 3D graphene oxide (GO) to adsorb APIs and undergo regeneration via light illumination. We determined optimal TiO2:SiO2:GO compositions for the S-MGCs through experiments using a model contaminant, methylene blue. The physical and chemical properties of S-MGCs were characterized, and their adsorption and photodegradation capabilities were studied using five model APIs, including sulfamethoxazole, carbamazepine, ketoprofen, valsartan, and diclofenac, both in single-component and multi-component mixtures. In the absence of TiO2/SiO2, 3D graphene oxide (CGB) displayed better adsorption performance compared to GAC, and S-MGCs further improve CGB's adsorption capacity. This performance remained consistent in two complex water environments: aqueous solutions at varying NOM levels and artificial urine. TiO2 supported on the GO surface exhibits similar photocatalytic activity to suspended TiO2. In a continuous fixed-bed column test, S-MGCs demonstrated robust API adsorption performance that is maintained in the presence of NOM or urine, and can be regenerated through multiple cycles of adsorption and light illumination.

Unmasking Spatial Heterogeneity in Phytotoxicology Mechanisms Induced by Carbamazepine by Mass Spectrometry Imaging and Multiomics Analyses

Previous studies have highlighted the toxicity of pharmaceuticals and personal care products (PPCPs) in plants, yet understanding their spatial distribution within plant tissues and specific toxic effects remains limited. This study investigates the spatial-specific toxic effects of carbamazepine (CBZ), a prevalent PPCP, in plants. Utilizing desorption electrospray ionization mass spectrometry imaging (DESI-MSI), CBZ and its transformation products were observed predominantly at the leaf edges, with 2.3-fold higher concentrations than inner regions, which was confirmed by LC-MS. Transcriptomic and metabolic analyses revealed significant differences in gene expression and metabolite levels between the inner and outer leaf regions, emphasizing the spatial location's role in CBZ response. Notably, photosynthesis-related genes were markedly downregulated, and photosynthetic efficiency was reduced at leaf edges. Additionally, elevated oxidative stress at leaf edges was indicated by higher antioxidant enzyme activity, cell membrane impairment, and increased free fatty acids. Given the increased oxidative stress at the leaf margins, the study suggests using in situ Raman spectroscopy for early detection of CBZ-induced damage by monitoring reactive oxygen species levels. These findings provide crucial insights into the spatial toxicological mechanisms of CBZ in plants, forming a basis for future spatial toxicology research of PPCPs.

Occurrence, distribution, and ecological risk assessment of pharmaceuticals and personal care products in the surface water of Lipu River, China

Pharmaceuticals and Personal Care Products (PPCPs) are inadvertently released into the aquatic environment, causing detrimental effects on aquatic ecosystem. There is an urgent need of an in-deep investigation on contamination information of PPCPs in aquatic environment as well as the ecological risks to the aquatic ecosystem. This study was carried out in Lipu River basin, China, to investigate the distribution pattern and ecological risks of PPCPs. Results showed that PPCPs pollution is ubiquitous, 29 out of 30 targeted PPCPs were detected in Lipu River. Fourteen PPCPs were detected with a frequency of 100% in all water samples, and ten PPCPs were detected with a frequency of more than 80%. The cumulated PPCPs concentrations ranged from 33.30 ng/L to 99.60 ng/L, with a median value of 47.20 ng/L in Lipu River. Caffeine, flumequine, nifedipine, and lomefloxacin were the predominant PPCPs in study area. Caffeine showed high ecological risk, five and seven individual PPCP showed medium and low ecological risk to algae.

Implementation of temporal moments to elucidate the reactive transport of metformin and erythromycin in the saturated porous media

This study investigates the fate and transport dynamics of metformin (MTN) and erythromycin (ETM), both classified as pharmaceutical and personal care products (PPCPs), in a saturated sandy soil column using temporal moment analysis (TMA). The key flow and transport parameters, including Darcy velocity, longitudinal dispersivity, adsorption, and degradation coefficients, were analyzed. The results reveal that MTN, a highly mobile contaminant, is eliminated from the column in approximately 40 days, while ETM shows significant adsorption due to its hydrophobic and adsorptive nature. Darcy velocity significantly affects PPCP transport; a one-order magnitude change alters contaminant mass recovery at the column outlet by 88% for MTN and 39-fold for ETM. Longitudinal dispersivity has minimal impact on the transport of PPCPs. However adsorption primarily governs the fate of PPCPs with high adsorption coefficients (Kd), and degradation rates control the fate of low-sorbing PPCPs. A one-order magnitude change in Kd results in a 55% change in the zeroth temporal moment (ZTM) of MTN and a 30-fold change in the case of ETM. Additionally, a one-order magnitude change in the degradation coefficient leads to a 60% variation in MTN's ZTM and a 5% variation in ETM's ZTM. Thus, TMA is a valuable tool for understanding PPCP dynamics in subsurface environments, providing critical insights for managing their increasing concentrations.

Chronic toxicity of sediment-bound triclosan on freshwater walking catfish Clarias magur: Organ level accumulation and selected enzyme biomarker responses

Triclosan (TCS) is a biocide widely used in personal care and medicinal products. TCS persists in sediments and has been detected worldwide, making sediments a vital route of TCS exposure to aquatic organisms. This experiment explored the bioaccumulation and toxicological effects of TCS-contaminated sediment. The study revealed that the half-life of TCS in the sediment-water system was 21.52 days. Exposure of Clarias magur juveniles to 0.4 and 0.8 mg kg-1 TCS-spiked sediment resulted in high Biota-Sediment Accumulation Factor (BSAF) with the highest bioaccumulation in the liver (29.62-73.61 mg kg-1), followed by gill (9.22-17.57 mg kg-1), kidney (5.04-9.76 mg kg-1), muscle (2.63-4.87 mg kg-1) and brain (1.53-3.20 mg kg-1). Furthermore, a concentration-dependent increase in oxidative stress biomarkers such as superoxide dismutase (SOD), catalase (CAT) and glutathione-S-transferase (GST) was documented during 45 days of exposure in gill, liver, kidney, muscle, and brain tissues of exposed fish. A similar increasing trend was also recorded for liver transaminase enzymes such as glutamic oxaloacetic transaminase (GOT) and glutamic pyruvic transaminase (GPT) during the experimental period compared to control. Serum biochemical analysis revealed a significant time and concentration-dependent increase in serum glucose, serum GOT, and serum GPT, while serum total protein and albumin decreased significantly during exposure. These findings demonstrate high bioaccumulative and toxic nature of TCS in fish, promoting multiple physiological and biochemical dysfunctions through sediment exposure. The study underscores the urgent need for strengthened regulations and robust monitoring of triclosan across various environmental matrices, including sediment, to mitigate the detrimental impacts of TCS effectively.

Occurrence and fate of pharmaceuticals and personal care products in a wastewater treatment plant with Bacillus bio-reactor treatment

Pharmaceuticals and personal care products (PPCPs) have attracted wide attention due to their environmental impacts and health risks. PPCPs released through wastewater treatment plants (WWTPs) are estimated to be 80 %. Nevertheless, the occurrence of PPCPs in the WWTPs equipped with Bacillus spec.-based bioreactors (BBR) treatment system remains unclear. In this study, sludge and waste water samples were collected during separate winter and summer sampling campaigns from a typical BBR treatment system. The results indicate that out of 58 target PPCPs, 27 compounds were detected in the waste water (0.06-1900 ng/L), and 23 were found in the sludge (0.6-7755 ng/g dw). Paraxanthine was the chemical of the highest abundance in the influent due to the high consumption of the parent compounds caffeine and theobromine. The profile for PPCPs in the wastewater and sludge exhibited no seasonal variation. Overall, the removal of target PPCPs in summer is more effective than the winter. In the BBR bio-reactor, it was found that selected PPCPs (at ng/L level) can be completely removed. The efficiency for individual PPCP removal was increased from 1.0 % to 50 % in this unit, after target specific adjustments of the process. The effective removal of selected PPCPs by the BBR treatment system is explained by combined sorption and biodegradation processing. The re-occurrence of PPCPs in the wastewater was monitored. Negative removal efficiency was explained by the cleavage of Phase II metabolites after the biotransformation process, and the lack of equilibrium for PPCPs in the sludge of the second clarifier. A compound specific risk quotient (RQ) was calculated and applied for studying the potential environmental risks. Diphenhydramine is found with the highest environmental risk in wastewater, and 15 other PPCPs show negligible risks in sewage sludge.

Target and Suspect Screening for Organic Additives in Six Classifications of Personal Care Products Using Liquid Chromatography-High-Resolution Mass Spectrometry

Personal care products (PCPs) are integral components of daily human existence, including a large number of chemicals intentionally added for functional attributes (e.g., preservatives and fragrances) or unintentionally present, such as plasticizers. This investigation aimed to optimize the methodology for target and suspect screening via liquid chromatography-high-resolution mass spectrometry, focusing on nine prevalent organic additives (comprising bisphenols A, F, and S, methyl, ethyl, propyl, and butylparaben, 5-chloro-2-methyl-4-isothiazolin-3-one, and 4-hydroxybenzoic acid). A total of 50 high-selling PCPs were purchased from the local online market as samples. In detail, PCP samples were classified into body washes, shampoos, hair conditioners, facial cleansers, body lotions, and moisture creams. For calibration, the quality assurance and quality control results demonstrated a coefficient of determination (R2) surpassing 0.999, with detection and quantification limits ranging from 2.5 to 100.0 ng/g. For recovery experiments, replicate recoveries (n = 5) ranged from 61 to 134%. In purchased PCP samples, five of the nine target compounds were detected via a target screening. Methylparaben exhibited the highest concentration (7860 mg/kg) in a facial cleanser, which is known as an endocrine-disrupting chemical. A total of 248 suspects of organic additives were screened in PCPs, leading to a tentative identification of 9. Confirmation (confidence level 1) via reference standards was achieved for three suspects, while six were tentatively identified with a confidence level of 2. This two-step extraction methodology utilizing methyl tert-butyl ether and isopropyl alcohol enabled simultaneous analysis of diverse chemical groups with distinct properties.

2D/2D heterojunctions for rapid and self-cleaning removal of antibiotics via visible light-assisted peroxymonosulfate activation: Efficiency, synergistic effects, and applications

Developing eco-friendly and efficient technologies for treating antibiotic wastewater is crucial. Traditional methods face challenges in incomplete removal, high costs, and secondary pollution. Heterogeneous peroxymonosulfate (PMS) activation assisted by visible light shows promise, but suitable activators remain a huge challenge. Here, we synthesized cost-effective carbon nitride/bismuth bromide oxide (CN/BiOBr) heterojunctions. Such a heterojunction achieved rapid PMS activation, achieving over 90.00% tetracycline (TC) removal only within 1 min (kobs of 2.23 min-1), surpassing previous systems by nearly 1-2 orders of magnitude and even remarkably superior to the popular single-atom catalysts. The system exhibited self-cleaning properties, maintaining activity after 8 cycles and stability across a wide pH range (3.01 to 9.03). Quenching experiments and theoretical calculations elucidated the exclusive •O2- species involvement and removal pathways. Eco-toxicity assessment and total organic carbon results confirmed simultaneous degradation, detoxification, and mineralization. This system also showed excellent resistance to environmental factors, e.g., coexisting anions, varying pH, and water sources, and demonstrated potential in coking and medical wastewater purification. This study presents a novel technique for rapidly decontaminating antibiotic wastewater through visible light-assisted PMS activation and introduces innovative bionic catalytic oxidation combining light and darkness for practical applications.

Comparison of Trace Organic Chemical Removal Efficiencies between Aerobic and Anaerobic Membrane Bioreactors Treating Municipal Wastewater

Evaluating persistent trace organic chemicals (TOrCs) and transformation products (TPs) in membrane bioreactors (MBRs) is essential, given that MBRs are now widely implemented for wastewater treatment and water reuse. This research applied comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC/TOF-MS)-based nontargeted analysis to compare the effectiveness of parallel aerobic and anaerobic MBRs (AeMBRs and AnMBRs, respectively), treating the same municipal wastewater. The average total chromatographic feature peak area abundances were significantly reduced by 84% and 72% from influent to membrane permeate in both the AeMBR and AnMBR (p < 0.05), respectively. However, the reduction of the average number of chromatographic features was significant for only AeMBR treatment (p = 0.006). A similar number of TPs were generated during both AeMBR and AnMBR treatments (165 vs 171 compounds, respectively). The overall results suggest that the AeMBR was more effective for reducing the diversity of TOrCs than the AnMBR, but both aerobic and anaerobic processes had a similar reduction of TOrC abundance. Suspect screening analysis using GC×GC/TOF-MS, which resulted in the tentative identification of 351 TOrCs, proved to be a powerful approach for uncovering compounds previously unreported in wastewater, including many fragrances and personal care products.

Application of artificial intelligence for the optimization of advanced oxidation processes to improve the water quality polluted with pharmaceutical compounds

Sulfamethoxazole and metronidazole are emerging pollutants commonly found in surface water and wastewater. These compounds have a significant environmental impact, being necessary in the design of technologies for their removal. Recently, the advanced oxidation process has been proven successful in the elimination of this kind of compounds. In this sense, the present work discusses the application of UV/H2O2 and ozonation for the degradation of both molecules in single and binary systems. Experimental kinetic data from O3 and UV/H2O2 process were adequately described by a first and second kinetic model, respectively. From the ANOVA analysis, it was determined that the most statistically significant variables were the initial concentration of the drugs (0.03 mmol L-1) and the pH = 8 for UV/H2O2 system, and only the pH (optimal value of 6) was significant for degradation with O3. Results showed that both molecules were eliminated with high degradation efficiencies (88-94% for UV/H2O2 and 79-98% for O3) in short reaction times (around 30-90 min). The modeling was performed using a quadratic regression model through response surface methodology representing adequately 90 % of the experimental data. On the other hand, an artificial neural network was used to evaluate a non-linear multi-variable system, a 98% of fit between the model and experimental data was obtained. The identification of degradation byproducts was performed by high-performance liquid chromatography coupled to a time mass detector. After each process, at least four to five stable byproducts were found in the treated water, reducing the mineralization percentage to 20% for both molecules.

Multiple biomarkers in pufferfish as a proxy of environmental health in brazilian marine protected areas

Marine Protected Areas (MPAs) are designed to conserve biodiversity and vulnerable ecosystems. This study aimed to assess the environmental quality of three Brazilian MPAs, based on the integrated analysis of biomarkers in pufferfish. The MPAs are differentiated by the degree of anthropogenic influences. The Barra do Una Estuary sustainable reserve (JUR) is a reference area due to its low levels of contamination and species diversity. The Cananéia Estuarine System (CAN) has been recognized as a biosphere reserve by UNESCO, as well as a Ramsar wetland. This MPA was influenced by upstream mining activities, resulting in the introduction of metals in the estuarine waters and the discharge of untreated urban sewage. The São Vicente estuary (SSV) lacks proper sanitation infrastructure. All collections were conducted during winter season, and, after collection, the animals were euthanized, their soft tissues were removed, and multiple biomarkers were analyzed in the gills and liver, as biometric, genotoxic, biochemical, and morphological. A one-factor multivariate analysis was applied to evaluate the differences between the data sets, and the matrices were analyzed using PERMANOVA to evaluate the "estuary" factor. The results were integrated using PCA with a 0.4 cut value and an Enhanced Integrated Biomarker Response (EIBR) was calculated. PCA was correlated with biochemical, genotoxic, and morphological biomarkers. In general, SVV differed from CAN and JUR as shown by both univariate and multivariate analyses. SVV also showed the highest EIBR, followed by CAN. Organisms from SSV showed greater gill pathology, elevated AChE activity and lipoperoxidation (LPO), and micronuclei frequency. CAN present intermediate EIBR, with severe pathologies in the liver. CAN seems to present an intermediate environmental quality between SSV and JUR indicating the importance of the existence of MPAs for environmental conservation and the need to monitor such areas, to maintain their suitable environmental quality.

Towards Precision Ecotoxicology: Leveraging Evolutionary Conservation of Pharmaceutical and Personal Care Product Targets to Understand Adverse Outcomes Across Species and Life Stages

Translation of environmental science to the practice aims to protect biodiversity and ecosystem services, and our future ability to do so relies on the development of a precision ecotoxicology approach wherein we leverage the genetics and informatics of species to better understand and manage the risks of global pollution. A little over a decade ago, a workshop focusing on the risks of pharmaceuticals and personal care products (PPCPs) in the environment identified a priority research question, "What can be learned about the evolutionary conservation of PPCP targets across species and life stages in the context of potential adverse outcomes and effects?" We review the activities in this area over the past decade, consider prospects of more recent developments, and identify future research needs to develop next-generation approaches for PPCPs and other global chemicals and waste challenges. Environ Toxicol Chem 2024;43:526-536. © 2023 SETAC. This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA.

Correlations between China's socioeconomic status, disease burdens, and pharmaceuticals and personal care product levels in wastewater

The presence of pharmaceutical and personal care products (PPCPs) in domestic wastewater can potentially indicate socioeconomic status and disease burdens. However, current knowledge is limited to the correlation between specific pharmaceuticals and diseases. This study aims to explore the associations between socioeconomic status, disease burdens, and PPCP levels in domestic wastewater at a national level. Samples from 171 wastewater influents across China were used to measure PPCPs, and the per capita consumption of PPCPs was calculated. Results showed that the 31 targeted PPCPs were widely present in wastewater with varying occurrence characteristics. The mean consumption levels of different PPCPs varied greatly, ranging from 0.03 to 110723.15 µg/d/capita. While there were no significant regional differences in the overall pattern of PPCP consumption, 22 PPCPs showed regional variations between Northern China and Southern China. PPCPs with similar usage purposes exhibited similar distribution patterns. Disease burden (70.1%) was the main factor affecting most PPCP consumption compared to socioeconomic factors (26.4%). Through correlation analyses, specific types of PPCPs were identified that were highly associated with socioeconomic status and disease burdens, such as hypertension-bezafibrate, brucellosis-quinolones, sulfonamides, hepatitis-triclosan, triclocarban, socioeconomic development-fluoxetine, and people's living standards-gemfibrozil. Despite some uncertainties, this study provides valuable insights into the relationship between PPCPs in domestic wastewater and socioeconomic status and human health.

Effect of molecular structure on the adsorption behavior of sulfanilamide antibiotics on crumpled graphene balls

Since the 1930s, sulfonamide(SA)-based antibiotics have served as important pharmaceuticals, but their widespread detection in water systems threatens aquatic organisms and human health. Adsorption via graphene, its modified form (graphene oxide, GO), and related nanocomposites is a promising method to remove SAs, owing to the strong and selective surface affinity of graphene/GO with aromatic compounds. However, a deeper understanding of the mechanisms of interaction between the chemical structure of SAs and the GO surface is required to predict the performance of GO-based nanostructured materials to adsorb the individual chemicals making up this large class of pharmaceuticals. In this research, we studied the adsorptive performance of 3D crumpled graphene balls (CGBs) to remove 10 SAs and 13 structural analogs from water. The maximum adsorption capacity qm of SAs on CGB increased with the number of (1) aromatic rings; (2) electron-donating functional groups; (3) hydrogen bonding acceptor sites. Furthermore, the CGB surface displayed a preference for homocyclic relative to heterocyclic aromatic structures. A leading mechanism, π-π electron-donor-acceptor interaction, combined with hydrogen bonding, explains these trends. We developed a multiple linear regression model capable of predicting the qm as a function of SA chemical structure and properties and the oxidation level of CGB. The model predicted the adsorptive behaviors of SAs well with the exception of a chlorinated/fluorinated SA. The insights afforded by these experiments and modeling will aid in tailoring graphene-based adsorbents to remove micropollutants from water and reduce the growing public health threats associated with antibiotic resistance and endocrine-disrupting chemicals.

Insights into degradation of pharmaceutical pollutant atenolol via electrochemical advanced oxidation processes with modified Ti4O7 electrode: Efficiency, stability and mechanism

A novel active Ce-doped Ti₄O₇ (Ti/Ti₄O₇-Ce) electrode was prepared and evaluated for improvement of the refractory pollutants degradation efficiency in Electrochemical advanced oxidation processes (EAOPs). The results showed that the addition of Ce in Ti/Ti₄O₇ electrode leading to great impact on •OH generation rate and electrode stability compared to pristine Ti/Ti₄O₇ electrode. Ti/Ti₄O₇-Ce electrode presented efficient oxidation capacity for pharmaceutical pollutant atenolol (ATL) in EAOPs, which could be attributed to the improvement of indirect oxidation mediated by electro-generated •OH, as the amount of •OH production was 16.5% higher than that in Ti/Ti₄O₇ within 120 min. The operational conditions greatly influenced the ATL degradation. The degradation efficiency of ATL increased as the current density, the degradation efficiency reached 100% under pH 4, but it just removed 81% of ATL under pH 10 after 120 min treatment. Results also suggested that the inhibiting effect from the ATL degradation was mostly associated with the decreased oxidation capacity induced by water hardness and natural organic matter (NOM). It displayed a satisfactory durability after 40 cycles of experimental detections in this research. The results of study suggested that Ti/Ti₄O₇-Ce was a promising electrode for the efficient degradation of PPCPs-polluted wastewater and provided constructive suggestion for the refractory pollutants of EAOPs.

Iron-engineered mesoporous biocarbon composite and its adsorption, activation, and regeneration approach for removal of paracetamol in water

Three-dimensional multi-porous Iron Oxide/carbon (Fe₂O₃/C) composites derived from tamarind shell biomass were synthesized by a single-step co-pyrolysis technique and utilized for Paracetamol (PAC) dismissal in the combined adsorption, and advanced oxidation such as electrochemical regeneration techniques. The Fe₂O₃/C composites were prepared by different pyrolysis temperatures, and named as TS750 (without Fe₂O₃at 750 °C), MTS450 BCs (Low-450 °C), MTS600 BCs (Moderate-600 °C) and MTS750 BCs (high-750 °C), respectively. As-prepared Fe₂O₃/C composite was characterized by FE-SEM, XRD, BET, and XPS analysis. The specific surface area and the spatial interaction between the interlayers of Fe₂O₃ and C were significantly improved by increasing the pyrolysis temperatures from 450 to 750 °C, which improved the adsorption capacity of Fe₂O₃/C composites in terms of higher rate constants and chemisorption kinetics. The Pseudo-second-order kinetics model fitted in the adsorption test results of Fe₂O₃/C composites with the highest correlation co-efficiency. The Langmuir-isotherms model fitted in the adsorption test of the TS750 and MTS450 BCs. The Freundlich isotherms model is more fit with MTS600 and MTS750 BCs. Based on the isotherm results, the MTS750 BCs achieved 46.9 mg/g of maximum PAC adsorption capacity. The optimized MTS750 composites could be completely recovered by using an advanced electrochemical oxidation regeneration approach within 180 min. Also, with the adsorption and recovery process, the TOC removal rate improved to ∼79.4%. After the 6th cycle electrochemical oxidation process, the obtained results of the re-adsorption test showed the stabile adsorption activity of the sorbent material. The data outcomes herein propose that this type of combined adsorption and electrochemical approach will be useful in commercial water treatment plants.

Stressors of emerging concern in deep-sea environments: microplastics, pharmaceuticals, personal care products and deep-sea mining

Although most deep-sea areas are remote in comparison to coastal zones, a growing body of literature indicates that many sensitive ecosystems could be under increased stress from anthropogenic sources. Among the multiple potential stressors, microplastics (MPs), pharmaceuticals and personal care products (PPCPs/PCPs) and the imminent start of commercial deep-sea mining have received increased attention. Here we review recent literature on these emerging stressors in deep-sea environments and discuss cumulative effects with climate change associated variables. Importantly, MPs and PPCPs have been detected in deep-sea waters, organisms and sediments, in some locations in comparable levels to coastal areas. The Atlantic Ocean and the Mediterranean Sea are the most studied areas and where higher levels of MPs and PPCPs have been detected. The paucity of data for most other deep-sea ecosystems indicates that many more locations are likely to be contaminated by these emerging stressors, but the absence of studies hampers a better assessment of the potential risk. The main knowledge gaps in the field are identified and discussed, and future research priorities are highlighted to improve hazard and risk assessment.

Photodegradation fate of different dissociation species of antidepressant paroxetine and the effects of metal ion Mg2+: Theoretical basis for direct and indirect photolysis

Paroxetine (abbreviated as PXT) has been widely used as one of the standard antidepressants for the treatment of depression. PXT has been detected in the aqueous environment. However, the photodegradation mechanism of PXT remains unclear. The present study aimed to use density functional theory and time-dependent density functional theory to study the photodegradation process of two dissociated forms of PXT in water. The main mechanisms include direct and indirect photodegradation via reaction with ·OH and ¹O₂ and photodegradation mediated by the metal ion Mg²⁺. Based on the calculations, PXT and PXT-Mg²⁺ complexes in water are photodegraded mainly indirectly and directly. It was found that PXT and PXT-Mg²⁺ complexes were photodegraded by H-abstraction, OH-addition and F-substitution. The main reaction of PXT indirect photolysis is OH-addition reaction, while the main reaction of PXT⁰-Mg²⁺ complex is H-abstraction. All the reaction pathways of H-abstraction, OH-addition and F-substitution are exothermic. PXT⁰ reacts more readily with ·OH or ¹O₂ in water than PXT⁺. However, the higher activation energy of PXT with ¹O₂ indicates that the ¹O₂ reaction plays a minor role in the photodegradation pathway. The direct photolysis process of PXT includes ether bond cleavage, defluorination, and dioxolane ring-opening reaction. In the PXT-Mg²⁺ complex, the direct photolysis process occurs via a dioxolane ring opening. Additionally, Mg²⁺ in water has a dual effect on the direct and indirect photolysis of PXT. In other words, Mg²⁺ can inhibit or promote their photolytic reactions. Overall, PXT in natural water mainly undergo direct and indirect photolysis reactions with ·OH. The main products include direct photodegradation products, hydroxyl addition products and F-substitution products. These findings provide critical information for predicting the environmental behavior and transformation of antidepressants.

Augmented photocatalytic degradation of Acetaminophen using hydrothermally treated g-C3N4 and persulfate under LED irradiation

Photocatalytic degradation of organic pollutants in water using graphitic carbon nitride and persulfate under visible light (g-C₃N₄/PS system) has been studied. Here, we demonstrate augmentation of photocatalytic degradation of Acetaminophen (AAP) using hydrothermally treated g-C₃N₄ and PS under 400 nm LED irradiation (HT-g-C₃N₄/PS system). A pseudo-first-order rate constant (k_obs, 0.328 min^-1) for degradation of AAP using HT-g-C₃N₄/PS system was determined to be 15 times higher compared to g-C₃N₄/PS system (k_obs, 0.022 min^-1). HT-g-C₃N₄ showed a higher surface area (81 m²/g) than g-C₃N₄ (21 m²/g). Photocurrent response for HT-g-C₃N₄ was higher (1.5 times) than g-C₃N₄. Moreover, Nyquist plot semicircle for HT-g-C₃N₄ was smaller compared to g-C₃N₄. These results confirm effective photoelectron-hole separation and charge-transfer in HT-g-C₃N₄ compared to g-C₃N₄. AAP degradation using HT-g-C₃N₄/PS system was significantly inhibited with O2.- and h⁺ scavengers compared to ¹O_2,SO4.- and HO. scavengers. ESR results revealed O2.- formation in HT-g-C₃N₄/PS system. Moreover, photocurrent measurements reveal AAP oxidation by h⁺ of HT-g-C₃N₄ was effective than g-C₃N₄. HT-g-C₃N₄ was reused for five cycles in HT-g-C₃N₄/PS system. Augmented photocatalytic degradation of AAP by HT-g-C₃N₄/PS system compared to g-C₃N₄/PS is attributed to effective photoelectron hole separation of HT-g-C₃N₄ that generates O2.- and h⁺ for oxidation of pollutant. Importantly, electrical energy per order (E_EO) was 7.2 kWh m^-3 order^-1. k_obs for degradation of AAP in simulated groundwater and tap water were determined as 0.029 and 0.035 min^-1, respectively. Degradation intermediates of AAP were proposed. AAP ecotoxicity against marine bacteria Aliivibrio fischeri was completely removed after treatment by HT-g-C₃N₄/PS system.

Estimating the Mass of Pharmaceuticals Harbored in Municipal Solid Waste Landfills by Analyzing Refuse Samples at Various Ages and Depths

Pharmaceuticals have been detected at high concentrations in municipal solid waste (MSW) landfill leachates, which are recognized as an underestimated source of pharmaceutical residues in the environment. However, limited efforts have been made to characterize pharmaceuticals in MSW landfill refuse, which is also of significant concern given the potential long-term environmental impact. Herein, we excavated landfill refuse from six cells with landfill ages of 7-27 years in the largest MSW landfill in Shanghai (in each cell, landfill refuse was collected from different depths of 2-8 m) and analyzed samples for the presence of 55 pharmaceuticals, including antibiotics and non-antibiotics. The results reveal the presence of 42 pharmaceuticals in landfill refuse, with median concentrations ranging from 0.30 to 116 μg/kg. Antibiotic and non-antibiotic pharmaceuticals exhibited diverse concentration trends with age, related to changes in policy intervention and consumption over time. Different concentration variations of individual pharmaceuticals were observed in refuse samples excavated at different depths and positively correlated to their sorption ability. The mass of pharmaceuticals in the investigated landfill was estimated from the obtained concentrations to be 80-220 tons with 95% probability, based on Monte Carlo analysis. To the best of our knowledge, this study provides the first estimate of pharmaceutical mass in an MSW landfill. The results will be helpful for understanding the potential long-term environmental impact of pharmaceuticals in landfills.

Trophodynamic of endocrine disrupting compounds in the aquatic food webs: Association with hydrophobicity and biota metabolic rate

Increasing concentration of endocrine disrupting compounds (EDCs) are released into the aquatic environment, resulting in irreversible effects on the endocrine and reproductive systems of biota. How the liver enzymes affect metabolic rate of these compounds and thus their structure-related trophic transfer in aquatic food webs remains largely unknown. In this study, the concentrations of seven common EDCs were measured in 15 species of fish, 7 invertebrate species and plankton collected from Liuxi River to Pearl River, South China. The mean ΣEDC concentrations generally were found to increase as follows: plankton (29.59 ng g^-1 dw) < invertebrate species (50.69 ng g^-1 dw) < fish (122.56 ng g^-1 dw), with 4-nonylphenol (4-NP) and bisphenol S (BPS) as the predominant components. Trophic magnification factors (TMFs) values were >1.0 ranged from 1.30 (BPS) to 4.07 (4-NP), indicating trophic magnification potential. Measurement of metabolism and activities of microsomal CYP450 enzymes were performed in the fish liver microsomes of Hypophthalmichthys molitrix ([TL] = 2.27), Cirrhinus mrigala (TL = 3.87) and Odontamblyopus rubicundus (TL = 4.73). TMFs were significantly negatively correlated with the obtained in vitro biotransformation clearance rates (CL _{in vitro}) of EDCs and CYP450 enzymes activities. A multiple linear regression model indicated that biotransformation clearance is a more powerful predictor for TMFs than the hydrophobicity (Kow) to drive changes in the studied aquatic food web trophodynamics.

Co-contaminants of ethinylestradiol and sulfamethoxazole in groundwater exacerbate ecotoxicity and ecological risk and compromise the energy budget of C. elegans

Ethinylestradiol (EE2) and sulfamethoxazole (SMX) are among pharmaceuticals and personal care products (PPCPs) and regarded as emerging contaminants in groundwater worldwide. However, the ecotoxicity and potential risk of these co-contaminants remain unknown. We investigated the effects of early-life long-term co-exposure to EE2 and SMX in groundwater on life-history traits of Caenorhabditis elegans and determined potential ecological risks in groundwater. L1 larvae of wild-type N2 C. elegans were exposed to measured concentrations of EE2 (0.001, 0.75, 5.1, 11.8 mg/L) or SMX (0.001, 1, 10, 100 mg/L) or co-exposed to EE2 (0.75 mg/L, no observed adverse effect level derived from its reproductive toxicity) and SMX (0.001, 1, 10, 100 mg/L) in groundwater. Growth and reproduction were monitored on days 0 - 6 of the exposure period. Toxicological data were analyzed using DEBtox modeling to determine the physiological modes of action (pMoAs) and the predicted no-effect concentrations (PNECs) to estimate ecological risks posed by EE2 and SMX in global groundwater. Early-life EE2 exposure significantly inhibited the growth and reproduction of C. elegans, with lowest observed adverse effect levels (LOAELs) of 11.8 and 5.1 mg/L, respectively. SMX exposure impaired the reproductive capacity of C. elegans (LOAEL = 0.001 mg/L). Co-exposure to EE2 and SMX exacerbated ecotoxicity (LOAELs of 1 mg/L SMX for growth, and 0.001 mg/L SMX for reproduction). DEBtox modeling showed that the pMoAs were increased growth and reproduction costs for EE2 and increased reproduction costs for SMX. The derived PNEC falls within the range of detected environmental levels of EE2 and SMX in groundwater worldwide. The pMoAs for EE2 and SMX combined were increased growth and reproduction costs, resulting in lower energy threshold values than single exposure. Based on global groundwater contamination data and energy threshold values, we calculated risk quotients for EE2 (0.1 - 123.0), SMX (0.2 - 91.3), and combination of EE2 and SMX (0.4 - 341.1). Our findings found that co-contamination by EE2 and SMX exacerbates toxicity and ecological risk to non-target organisms, suggesting that the ecotoxicity and ecological risk of co-contaminants of pharmaceuticals should be considered to sustainably manage groundwater and aquatic ecosystems.

Structural Features Promoting Photocatalytic Degradation of Contaminants of Emerging Concern: Insights into Degradation Mechanism Employing QSA/PR Modeling

Although heterogeneous photocatalysis has shown promising results in degradation of contaminants of emerging concern (CECs), the mechanistic implications related to structural diversity of chemicals, affecting oxidative (by HO•) or reductive (by O2•−) degradation pathways are still scarce. In this study, the degradation extents and rates of selected organics in the absence and presence of common scavengers for reactive oxygen species (ROS) generated during photocatalytic treatment were determined. The obtained values were then brought into correlation as K coefficients (MHO•/MO2•−), denoting the ratio of organics degraded by two occurring mechanisms: oxidation and reduction via HO• and O2•−. The compounds possessing K >> 1 favor oxidative degradation over HO•, and vice versa for reductive degradation (i.e., if K << 1 compounds undergo reductive reactions driven by O2•−). Such empirical values were brought into correlation with structural features of CECs, represented by molecular descriptors, employing a quantitative structure activity/property relationship (QSA/PR) modeling. The functional stability and predictive power of the resulting QSA/PR model was confirmed by internal and external cross-validation. The most influential descriptors were found to be the size of the molecule and presence/absence of particular molecular fragments such as C − O and C − Cl bonds; the latter favors HO•-driven reaction, while the former the reductive pathway. The developed QSA/PR models can be considered robust predictive tools for evaluating distribution between degradation mechanisms occurring in photocatalytic treatment.

Orientated construction of visible-light-assisted peroxymonosulfate activation system for antibiotic removal: Significant enhancing effect of Cl. JOURNAL OF HAZARDOUS MATERIALS 2023;445:130476. [PMID: 36455327 DOI: 10.1016/j.jhazmat.2022.130476]

Antibiotic contaminants can migrate over long distances in the water, thus possibly causing severe detriment to the environment and even potential harm to human health. Heterogeneous activation of peroxymonosulfate (PMS) assisted by visible light is an emerging and promising technology for the purification of such wastewater. This study designed an ultra-efficient and stable PMS activator (FeCN) to restore the typical antibiotic-polluted water under harsh conditions. About 90.94% of sulfamethoxazole (SMX) was degraded in 35 min in the constructed FeCN+PMS/vis system, and the reaction rate constant was nearly 50-fold higher than direct photocatalysis. Electron spin resonance, quenching experiments, LC/MS technique, eco-toxicity assessment, and density functional theory validated that the SMX removal was dominated by the attack of h⁺, ^•O₂^- and ¹O₂ on the active atoms of SMX molecules with high Fukui index, presenting as a simultaneous degradation and detoxification process. Such a visible-light-assisted PMS activation system also had good resistance to the environmental water bodies and a broad spectrum in the degradation of various pollutants. In particular, Cl^- (50 mM) could significantly accelerate the removal of SMX with a 32.6-fold increase in catalytic activity, and the mineralization efficiency could reach 56.6% under identical conditions. Moreover, this Cl^- containing system excluded the degradation products of disinfection by-products, and such a system was also versatile for different contaminants. This work demonstrates the feasibility of the FeCN+PMS/vis system for the remediation of antibiotic-contaminated wastewater in the presence and absence of Cl^-, and also highlights their great potential in WWTPs.

Metal oxide encapsulated by 3D graphene oxide creates a nanocomposite with enhanced organic adsorption in aqueous solution

The presence of organic contaminants (OCs) in aquatic systems is a threat to ecological and human health. Adsorption by graphene-based adsorbent is a promising technique for OC removal and we previously fabricated crumpled graphene balls (CGBs), via a novel nano-spray drying technique, which show robust adsorptive performance. Yet, since CGBs contain non-accessible surface area due to 2D graphene stacking, the goal of this research was to investigate the efficacy of maximizing the accessible CGB surface by synthesizing a nanocomposite composed of metal oxide nanoparticles encapsulated by crumpled graphene oxide (MGC). The metal oxides reduce graphene oxide stacking, expand the internal adsorptive surface area, and boost the adsorptive capacity of the MGC. MGC (fumed SiO₂ or SiO₂) exhibit an enhanced Langmuir adsorption capacity (q_m, normalized by the % carbon) for an OC model, methylene blue (MB), achieving improvements of 60-86% compared to CGB, 3-4 fold compared to powder activated carbon (PAC) and 6-7 fold compared to granular activated carbon (GAC). MGCs display rapid adsorption reaching equilibrium after 9-12 min of contact and remaining stable in wastewater effluent /surface water. A cost-efficiency comparison reveals MGCs achieve one ton of MB removal at similar or lower material costs than that of PAC/GAC.

Multicomponent Synthesis of Unsymmetrical Derivatives of 4-Methyl-Substituted 5-Nitropyridines

The multicomponent reaction of 2-nitroacetophenone (or nitroacetone), acetaldehyde diethyl acetal, β-dicarbonyl compound, and ammonium acetate in an acetic acid solution allowed the acquisition of previously undescribed 4-methyl-substituted derivatives of 5-nitro-1,4-dihydropyridine in satisfactory yields. The oxidation of the obtained 5-nitro-1,4-dihydropyridine derivatives resulted in the corresponding 2,4-dimethyl-5-nitropyridines. In addition, for the first time in the synthesis of unsymmetrical 1,4-dihydropyridines by the Hantzsch reaction acetaldehyde, diethyl acetal was used as a source of acetaldehyde. The use of more volatile and sufficiently reactive acetaldehyde in this reaction did not lead to a controlled synthesis of unsymmetrical 5-nitro-1,4-dihydropyridines. The proposed multicomponent approach to the synthesis of 4-methyl-substituted 5-nitro-1,4-dihydropyridines and their subsequent aromatization into pyridines made it possible to obtain previously undescribed and hardly accessible substituted 5(3)-nitropyridines.

Occurrence, distribution, and ecological risk assessment of pharmaceuticals and personal care products in the surface water of the middle and lower reaches of the Yellow River (Henan section)

Pharmaceuticals and personal care products (PPCPs) are commonly seen emerging organic contaminants in aquatic environments. The transects for the occurrence and distribution of 24 PPCPs along the middle and lower reaches of the Yellow River (Henan section) were investigated in this study. All 24 targeted compounds were detected in surface water, with concentrations in the range from not detected (ND) to 527.4 ng/L. Among these PPCPs, caffeine is found to have the highest concentration and its detection frequency is 100%. The total PPCP concentration ranged from 136 ng/L to 916 ng/L (median, 319.5 ng/L). Spatial analysis showed that the pollution level of PPCPs in the trunk stream was lower than that in most tributaries in the middle and lower reaches of the Yellow River (Henan section). The ecotoxicological risk assessment indicated that norfloxacin, azithromycin, estrone, and triclosan posed high risks to aquatic organisms (RQ > 1), roxithromycin and oxytetracycline imposed moderate risks (0.1 ≤ RQ < 1), and the tributary Jindi River had the highest mixed risk (MRQ = 222).

Photodegradation of phenylurea herbicides sensitized by norfloxacin and the influence of natural organic matter

The photochemical activity of fluoroquinolone antibiotics (FQs) has gained attention due to the discovery of their phototoxicity and photocarcinogenicity in clinics. This study reveals that norfloxacin (NOR) can sensitize the photodegradation of phenylurea (PU) herbicides. This is attributed to the formation of an excited triplet of norfloxacin (³NOR*) by UV-A irradiation of its quinolone chromophore, which can further react with O₂ to form singlet oxygen (¹O₂). The second-order rate of ³NOR* with PU ranges from 1.54 × 10¹⁰ to 2.76 × 10¹⁰ M^-1s^-1. The steady-state concentrations of ³NOR* were calculated as (4.29-31.2)× 10^-16 M at 10 μM NOR under UV_365nm irradiation. Natural organic matter (NOM) inhibited the degradation of PU induced by ³NOR*. In the presence of 10 mg L^-1 NOM, the pseudo-first-order rate constants (k_obs,NOM) of the degradation of diuron (DIU), isoproturon (IPU), monuron (MOU), and chlorotoluron (CLU) decreased by 65%, 19%, 36%, and 62%, respectively. NOM mainly acts as a reductant which reacted with the radical intermediates of the PU generated by ³NOR*oxidation, thus reversing the oxidation. The inhibitory effect increases with increasing NOM concentration. Results of this study underscore the role of NOR as a photosensitizer in accelerating the abatement of PU pesticides in sunlit surface waters. This study significantly advances the understandings of the behavior of NOR in aquatic environments.

Removal of pharmaceutical active compounds in wastewater by constructed wetlands: Performance and mechanisms

The occurrence of pharmaceutical active compounds (PhACs) in aquatic environments is a cause for concern due to potential adverse effects on human and ecosystem health. Constructed wetlands (CWs) are cost-efficient and sustainable wastewater treatment systems for the removal of these PhACs. The removal processes and mechanisms comprise a complex interplay of photodegradation, biodegradation, phytoremediation, and sorption. This review synthesized the current knowledge on CWs for the removal of 20 widely detected PhACs in wastewater. In addition, the major removal mechanisms and influencing factors are discussed, enabling comprehensive and critical understanding for optimizing the removal of PhACs in CWs. Consequently, potential strategies for intensifying CWs system performance for PhACs removal are discussed. Overall, the results of this review showed that CWs performance in the elimination of some pharmaceuticals was on a par with conventional wastewater treatment plants (WWTPs) and, for others, it was above par. Furthermore, the findings indicated that system design, operational, and environmental factors played important but highly variable roles in the removal of pharmaceuticals. Nonetheless, although CWs were proven to be a more cost-efficient and sustainable technology for pharmaceuticals removal than other engineered treatment systems, there were still several research gaps to be addressed, mainly including the fate of a broad range of emerging contaminants in CWs, identification of specific functional microorganisms, transformation pathways of specific pharmaceuticals, assessment of transformation products and the ecotoxicity evaluation of CWs effluents.

Efficient peroxymonosulfate activation by biochar-based nanohybrids for the degradation of pharmaceutical and personal care products in aquatic environments

Recently, pharmaceutical and personal care products (PPCPs) have been of wide concern due to their ecological toxicity, persistence, and ubiquity in aquatic environments. Peroxymonosulfate-based advanced oxidation processes (PMS-AOPs) have shown great potential for eliminating PPCPs due to their superior oxidation ability and adaptability. Biochar-based nanohybrids have been employed as emerging catalysts for peroxymonosulfate (PMS) activation. Until now, few researchers have summarized PMS activation by biochar-based catalysts for PPCPs removal. In this review, the types, sources, fates, and ecological toxicities of PPCPs were first summarized. Furthermore, various preparation and modification methods of biochar-based catalysts were systematically introduced. Importantly, the application of activating PMS with biochar-based multifunctional nanocomposites for eliminating PPCPs was reviewed. The influencing factors, such as catalysts dosage, PMS dosage, solution pH, temperature, anions, natural organic matters (NOMs), and pollutants concentration were broadly discussed. Biochar-based catalysts can act as electron donors, electron acceptors, and electron shuttles to activate PMS for the removal of PPCPs through radical pathways or/and non-radical pathways. The degradation mechanisms of PPCPs are correlated with persistent free radicals (PFRs), metal species, defective sites, graphitized degree, functional groups, electronic attributes, and the hybridization modes of biochar-based catalysts. Finally, the current problems and further research directions on the industrial application of biochar-based nanocomposites were proposed. This study provides some enlightenment for the efficient removal of PPCPs with biochar-based catalysts in PMS-AOPs.

Occurrence, transport and environmental risk assessment of pharmaceuticals and personal care products (PPCPs) at the mouth of Jiaozhou Bay, China based on stir bar sorptive extraction

In recent years, research on pharmaceuticals and personal care products (PPCPs) in the marine environment has attracted increasing attention worldwide. However, more work is needed to improve PPCPs detection methods, specifically for seawater environments. An analytical method based on stir bar sorptive extraction (SBSE) had been developed and fully optimized for the pretreatment and detection of ten widely used PPCPs that are commonly found in seawater samples. By optimizing several variables including the material of the stir bars, extraction temperature, extraction time, ionic strength, desorption solvent, and desorption time, the optimized method has achieved excellent results in the detection and quantification of target PPCPs with detection limits ranging from 0.03 to 1 ng/L. The distribution of target PPCPs at the mouth of Jiaozhou Bay was successfully determined by this method, and the concentrations and detection frequencies of PPCPs varied greatly from N.D. to 449.36 ng/L and from 9.1 % to 100 %, respectively. Moreover, the distributions of PPCPs were explained by the Lagrangian particle-tracking model, and the results showed that the Tuandao sewage treatment plant had the most significant impact on the study area. The environmental risk assessment results showed that several target PPCPs might pose risks to aquatic organisms. In particular, triclocarban should receive more attention and the risk quotients of the mixtures (MRQ) should not be ignored.

Metal-free single heteroatom (N, O, and B)-doped coconut-shell biochar for enhancing the degradation of sulfathiazole antibiotics by peroxymonosulfate and its effects on bacterial community dynamics

Metal-free single heteroatom (N, O, and B)-doped coconut-shell biochar (denoted as N-CSBC, O-CSBC, and B-CSBC, respectively) were fabricated in a one-step pyrolysis process to promote peroxymonosulfate (PMS) activation for the elimination of sulfathiazole (STZ) from aquaculture water. B-CSBC exhibited remarkably high catalytic activity with 92% of STZ degradation in 30 min attributed to the presence of meso-/micro-pores and B-containing functional groups (including B-N, B-C, and B₂O₃ species). Radical quenching tests revealed SO₄^•-, HO•, and ¹O₂ being the major electron acceptors contributing to STZ removal by PMS over B-CSBC catalyst. The B-CSBC catalyst has demonstrated high sustainability in multiple consecutive treatment cycles. High salinity and the presence of inorganic ions such as chloride, enhanced the performance of the sulfate radical-carbon-driven advanced oxidation processes (SR-CAOPs) as pretreatment strategy that significantly facilitated the removal of STZ from aquaculture water. Furthermore, a potential sulfonamide-degrading microorganism, Cylindrospermum_stagnale, belonging to the phylum Cyanobacteria, was the dominant functional bacteria according to the results of high-throughput 16S rRNA gene sequencing conducted after the B-CSBC/PMS treatment. This study provides new insights into the SR-CAOP combined with bioprocesses for removing STZ from aqueous environments.

Decentralized systems for the treatment of antimicrobial compounds released from hospital aquatic wastes

In many developing countries, untreated hospital effluents are discharged and treated simultaneously with municipal wastewater. However, if the hospital effluents are not treated separately, they pose concerning health risks due to the possible transport of the antimicrobial genes and microbes in the environment. Such effluent is considered as a point source for a number of potentially infectious microorganisms, waste antimicrobial compounds and other contaminants that could promote antimicrobial resistance development. The removal of these contaminants prior to discharge reduces the exposure of antimicrobials to the environment and this should lower the risk of superbug development. At an effluent discharge site, suitable pre-treatment of wastewater containing antimicrobials could maximise the ecological impact with potentially reduced risk to human health. In addressing these points, this paper reviews the applications of decentralized treatment systems toward reducing the concentration of antimicrobials in wastewater. The most commonly used techniques in decentralized wastewater treatment systems for onsite removal of antimicrobials were discussed and evidence suggests that hybrid techniques should be more useful for the efficient removal of antimicrobials. It is concluded that alongside the cooperation of administration departments, health industries, water treatment authorities and general public, decentralized treatment technology can efficiently enhance the removal of antimicrobial compounds, thereby decreasing the concentration of contaminants released to the environment that could pose risks to human and ecological health due to development of antimicrobial resistance in microbes.

Quantitative structure-activity relationship (QSAR) guides the development of dye removal by coagulation

QSAR modeling could be a promising tool for guiding the development of novel and cost-effective environmental technologies. As an example, it could be widely used to analyze the degradation rules of organic pollutants in various decomposition methods. However, a lack of systematic research on a particular removal method is significant in revealing the decomposition rule of pollutants more accurately and guiding industrial applications. In this study, six coagulation systems (MnO₂/Fe(OH)₃/AlCl₃/FeCl₃/CaCl₂/MgCl₂) were used as examples to remove 38 dyes under three pH conditions, and the characteristics and differences of these systems were explored by QSAR modeling. The results showed that the removal effect by MnO₂ under acidic and neutral conditions and Fe(OH)₃ under acidic conditions were quantitatively described mainly by bond order (BO) and Fukui index (f (+) and f (0)), which reflected that oxidative degradation dominated. In contrast, most of the critical parameters of other systems were molecular descriptors represented by ∑q(O) (the total charge of all the oxygen atoms in the molecule) and SAA (surface area of a molecule), which reflected that electrostatic adsorption and hydrogen-bond adsorption processes dominated.

Evolutionary conservation of leptin effects on wound healing in vertebrates: Implications for veterinary medicine

In mammals, the cytokine hormone leptin promotes wound healing by increasing inflammation, cellular recruitment, angiogenic regrowth, and re-epithelialization; however, it is not known whether leptin has conserved actions on wound healing in other vertebrates. Here, we tested the hypothesis that leptin promotes both the quality and speed of wound healing in the South African clawed frog, Xenopus laevis. First, fluorescent immunohistochemistry using a polyclonal antibody specific to Xenopus leptin showed that in juvenile dorsal skin, leptin protein is expressed in the dorsal epidermal layer, as well in blood vessel endothelial cells and sensory nerves that run along the base of the dermis. Injection of recombinant Xenopus leptin (rXleptin) stimulates phosphorylated STAT3 (pSTAT3), indicative of leptin-activated JAK/STAT signaling in the epidermis. Similar to mammals, leptin protein expression increases at the wound site after injury of the epidermis. We then cultured "punch-in-a-punch" full-thickness dorsal skin explants in three doses of rXleptin (0, 10, and 100 ng/ml) and showed that leptin treatment doubled the rate of wound closure after 48 h relative to skin punches cultured without leptin. Food restriction prior to wound explant culture reduced the amount of wound closure, but leptin injection prior to euthanasia rescued closure to similar control levels. Leptin treatment also significantly reduced bacterial infection of these epidermal punches by 48 h in culture. This study shows that leptin is likely an endogenous promoter of wound healing in amphibians. Leptin-based therapies have the potential to expedite healing and reduce the incidence of secondary infections without toxicity issues, the threat of antibiotic resistance, or environmental antibiotic contamination. The conservation of leptin's actions on wound healing also suggests that it may have similar veterinary applications for other exotic species.

Occurrence, transformation, bioaccumulation, risk and analysis of pharmaceutical and personal care products from wastewater: a review

Almost all aspects of society from food security to disease control and prevention have benefited from pharmaceutical and personal care products, yet these products are a major source of contamination that ends up in wastewater and ecosystems. This issue has been sharply accentuated during the coronavirus disease pandemic 2019 (COVID-19) due to the higher use of disinfectants and other products. Here we review pharmaceutical and personal care products with focus on their occurrence in the environment, detection, risk, and removal.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10311-022-01498-7.