A mechanistic and kinetic study on the formation of PBDD/Fs from PBDEs

Radical scavenging activity of bromophenol analogs: analysis of kinetics and mechanisms

CONTEXT

This theoretical study explores the antioxidant activity of five bromophenol analogs, with a particular focus on their interaction with different solvent environments of varying polarities. Key findings include the correlation between increased solvent polarity and enhanced antioxidant activity of these analogs, comparable in some instances to ascorbic acid. Notably, compound 5, developed by our research team, demonstrates superior antioxidant activity in both lipid and aqueous solutions, surpassing that of ascorbic acid and other tested analogs. This research contributes to the understanding of bromophenol analogs, presenting the first known kinetic and chemical stability data such as rate constants, pKa values, and branching ratios for reactions with the methylperoxyl radical (CH3OO•).

METHODS

The computational analyses were conducted using the Gaussian 09 software suite at the M05-2X/6-31 + G(d) computational level. These analyses employed conventional transition state theory to account for various potential mechanisms and effects of solvent polarity on the antioxidant activities of bromophenol analogs. The study meticulously calculated enthalpy under standard conditions (298.15 K and 1 atm) with necessary thermodynamic corrections. Additionally, the Quantum Mechanics-based Test for Overall Radical Scavenging Activity (QMORSA) protocol guided the evaluation of radical scavenging activity, ensuring a comprehensive assessment of the antioxidant potential of the compounds.

Bromine contamination and risk management in terrestrial and aquatic ecosystems

Bromine (Br) is widely distributed through the lithosphere and hydrosphere, and its chemistry in the environment is affected by natural processes and anthropogenic activities. While the chemistry of Br in the atmosphere has been comprehensively explored, there has never been an overview of the chemistry of Br in soil and aquatic systems. This review synthesizes current knowledge on the sources, geochemistry, health and environmental threats, remediation approaches, and regulatory guidelines pertaining to Br pollution in terrestrial and aquatic environments. Volcanic eruptions, geothermal streams, and seawater are the major natural sources of Br. In soils and sediments, Br undergoes natural cycling between organic and inorganic forms, with bromination reactions occurring both abiotically and through microbial activity. For organisms, Br is a non-essential element; it is passively taken up by plant roots in the form of the Br- anion. Elevated Br- levels can limit plant growth on coastal soils of arid and semi-arid environments. Br is used in the chemical industry to manufacture pesticides, flame retardants, pharmaceuticals, and other products. Anthropogenic sources of organobromine contaminants in the environment are primarily wastewater treatment, fumigants, and flame retardants. When aqueous Br- reacts with oxidants in water treatment plants, it can generate brominated disinfection by-products (DBPs), and exposure to DBPs is linked to adverse human health effects including increased cancer risk. Br- can be removed from aquatic systems using adsorbents, and amelioration of soils containing excess Br- can be achieved by leaching, adding various amendments, or phytoremediation. Developing cost-effective methods for Br- removal from wastewater would help address the problem of toxic brominated DBPs. Other anthropogenic organobromines, such as polybrominated diphenyl ether (PBDE) flame retardants, are persistent, toxic, and bioaccumulative, posing a challenge in environmental remediation. Future research directives for managing Br pollution sustainably in various environmental settings are suggested here.

Free radical formation via BDE-209 thermolysis in the precalciner of a cement kiln: Simulation and DFT study

To deeply understand the formation mechanism of polybrominated dibenzo-p-dioxins/furans (PBDD/Fs) in the thermal disposal process of polybrominated diphenyl ether (PBDE)-containing waste, this paper studied the formation pathways of key intermediates (free radicals, FRs) in the formation process of PBDD/Fs. BDE-209, the most common PBDE in the environment, was selected as the object of study to analyze FR formation by simulating the key conditions such as temperature (850 °C) and Fe-based materials when PBDE-containing waste entering cement kiln precalciner. Electron paramagnetic resonance (EPR) spectroscopy and density functional theory (DFT) calculations were used to study the reaction. The result of simulation experiments revealed carbon-centered radicals, and DMPO-OH analysis further confirmed the generation of FRs. The findings confirmed previous calculations predicting the existence of radical intermediates during the formation of PBDD/Fs from BDE-209. DFT calculations revealed the existence of an inner ortho-position CBr bond in BDE-209. The priority order of the bond breaking of BDE-209 was ether bond, inner ortho-position CBr bond, and outside ortho-position CBr bond. BDE-209 can further form three kinds of FRs, namely, oxygen-centered radicals of single benzene rings, carbon-centered radicals of single benzene rings, and carbon-centered radicals of double benzene rings. The specific processes of FR formation were inferred: high-temperature homogeneous cleavage of chemical bonds, electron transfer, and chemisorption, where electron transfer and chemisorption may be more important pathways. The proposed inner ortho-position cleavage within BDE-209 provides new insights into the degradation of PBDEs and the formation of PBDD/Fs; the results regarding BDE-209 generation radicals further elucidate the synthesis mechanism of dioxins, which is important for controlling dioxin generation and emission during the treatment and disposal of waste containing PBDEs.

A mechanistic and kinetic investigation on the oxidative thermal decomposition of decabromodiphenyl ether

The thermal processes of materials containing decabromodiphenyl ether (BDE-209) normally result in the exposure of BDE-209 to high-temperature environments, generating a series of hazardous compounds. However, the evolution mechanisms of BDE-209 during oxidative thermal processes remain unclear. Thus, this paper presents a detailed investigation on the oxidative thermal decomposition mechanism of BDE-209 by utilizing density functional theory methods at the M06/cc-pVDZ theoretical level. The results show that the barrierless fission of the ether linkage dominates the initial degradation of BDE-209 at all temperatures, with branching ratio over 80%. The decomposition of BDE-209 in oxidative thermal processes is mainly along BDE-209 → pentabromophenyl and pentabromophenoxy radicals → pentabromocyclopentadienyl radicals → brominated aliphatic products. Additionally, the study results on the formation mechanisms of several hazardous pollutants indicate that the ortho-phenyl-type radicals created by ortho-C-Br bond fission (branching ratio reached 15.1% at 1600 K) can easily be converted into octabrominated dibenzo-p-dioxin and furan, which require overcoming the energy barriers of 99.0 and 48.2 kJ/mol, respectively. The O/ortho-C coupling of two pentabromophenoxy radicals also acts as a non-negligible pathway for the formation of octabrominated dibenzo-p-dioxin. The synthesis of octabromonaphthalene involves the self-condensation of pentabromocyclopentadienyl radicals, followed by an intricately intramolecular evolution. Results presented in this study can enhance our understanding of the transformation mechanism of BDE-209 in thermal processes, and offer an insight into controlling the emissions of hazardous pollutants.

Degradation efficiency and mechanism of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) by thermally activated persulfate system

Polybrominated diphenyl ethers (PBDEs) as a typical brominated flame retardant (BFR) have attracted worldwide attention due to the high environmental risk and resistance to conventional remediation processes. In this study, thermally activated persulfate (TAP) process was applied to degrade 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), which is the most toxic and representative PBDEs in e-waste dismantling sites. Impact factors such as PDS dosage, heating temperature, and initial pH were evaluated. Results showed that BDE-47 can be 100% degraded within 180 min under the condition of PDS:BDE-47 = 1000:1, 60 °C, and pH = 7. Quenching experiments combined with EPR analysis further proved the important role of SO₄^·- in oxidating BDE-47. According to high-resolution mass spectrometry (HRMS) analysis, only one oxidation product of low toxicity was detected during the oxidation process. Theoretical calculations further revealed that the oxidation process mainly involved radical attack at C-Br bond, cleavage of C-Br bond, and fission of ether bond, and HSO₄· may also play an important role in BDE-47 degradation in TAP system. In addition, TAP system exhibited universality as all selected PBDE congeners can be degraded, and the degradation rate of PBDEs was greatly affected by the number of substituted Br atoms in a negative trend. Overall, these findings indicate that TAP can be applied as an effective method for removal of PBDEs, and we provide a new insight for the practical application of TAP technology in BDE-47 degradation from experimental and theoretical aspects.

Enhanced bromine fixation and tar lightweighting in co-pyrolysis of non-metallic fractions of waste printed circuit boards with Bayer red mud

A co-pyrolysis process for non-metallic fractions (NMFs) from WPCBs with Bayer red mud (RM) is proposed to upgrade pyrolysis products in this study. High bromine fixation efficiency was realized, and higher content of lightweight pyrolysis tar was obtained. The mechanism of catalytic pyrolysis and simultaneous bromine fixation of NMFs by RM was investigated by experiments and theoretical calculations. The three inorganic components of Fe₂O₃, CaCO₃ and Al₂O₃ in RM played key roles in the catalytic pyrolysis of NMFs, and their order of catalytic debromination effect was CaCO₃ > Fe₂O₃ > Al₂O₃. By adding 15 wt% RM, the pyrolysis solid residue could fix 89.55 wt% bromine, compared with 35.42 wt% of NMFs without adding RM, due to the formation of FeBr₂ and CaBr₂ from Fe₂O₃ and CaCO₃ in RM, respectively. Tar lightweighting was realized by reducing the energy barrier of the direct decomposition of tetrabromobisphenol A (TBBPA) in NMFs. The order of effect of the three key components on the tar lightweighting was Fe₂O₃ > Al₂O₃ > CaCO₃. The content of lightweight tar in the tar obtained by catalytic pyrolysis of NMFs with 15 wt% RM was 44.29% higher than that in the tar obtained by direct pyrolysis of NMFs. This work provides a theoretical guidance for the low-cost and eco-friendly recycling of e-wastes by co-pyrolysis with RM.

The thermal degradation and soil recovery of thermal treatment of field-weathered decabrominated diphenyl ether-contaminated soil

A farm at Taoyuan in Taiwan was highly contaminated with decabrominated diphenyl ether (BDE-209), a widely used commercial brominated flame retardant and persistent in the environment, more than 10 years. Since crops are able to absorb and accumulate BDE-209 from soils in our previous research, posing a hazardous risk for humans, it is essential to develop a practical method of soil treatment. Thermal treatment was studied among different approaches. In our previous study (Ko et al., 2022), we found that heating to 450 °C for 30 min achieved a complete removal of BDE-209 in soil. However, the high temperature significantly decreased the original soil organic matter (SOM) from 2.47% to 0.27%, altering the soil texture, damaging microbial biomass, and thus affecting the revegetation after the thermal treatment. Sugarcane bagasse, a common agricultural residue, served as an amendment to restore soil fertility. Current results indicate that 2.5% bagasse can improve the SOM in soil by up to 2.73% and restore its bacterial composition, making the plant growth conditions similar to those of the untreated contaminated soil. In light of the high removal efficiency provided by the 450°C-thermal treatment and the high recovery efficiency of sugarcane bagasse, the strategy presented in this study serves to be a promising method for sustainable remediation.

Framework of the Integrated Approach to Formation Mechanisms of Typical Combustion Byproducts─Polyhalogenated Dibenzo-p-dioxins/Dibenzofurans (PXDD/Fs)

Understanding the mechanisms through which persistent organic pollutants (POPs) form during combustion processes is critical for controlling emissions of POPs, but the mechanisms through which most POPs form are poorly understood. Polyhalogenated dibenzo-p-dioxins and dibenzofurans (PXDD/Fs) are typical toxic POPs, and the formation mechanisms of PXDD/Fs are better understood than the mechanisms through which other POPs form. In this study, a framework for identifying detailed PXDD/Fs formation mechanisms was developed and reviewed. The latest laboratory studies in which organic free radical intermediates of PXDD/Fs have been detected in situ and isotope labeling methods have been used to trace transformation pathways were reviewed. These studies provided direct evidence for PXDD/Fs formation pathways. Quantum chemical calculations were performed to determine the rationality of proposed PXDD/Fs formation pathways involving different elementary reactions. Many field studies have been performed, and the PXDD/Fs congener patterns found were compared with PXDD/Fs congener patterns obtained in laboratory simulation studies and theoretical studies to mutually verify the dominant PXDD/Fs formation mechanisms. The integrated method involving laboratory simulation studies, theoretical calculations, and field studies described and reviewed here can be used to clarify the mechanisms involved in PXDD/Fs formation. This review brings together information about PXDD/Fs formation mechanisms and provides a methodological framework for investigating PXDD/Fs and other POPs formation mechanisms during combustion processes, which will help in the development of strategies for controlling POPs emissions.

Theoretical study on pyrolysis mechanism of decabromodiphenyl ether (BDE-209) using DFT method

Decabromodiphenyl ether (BDE-209), as a brominated flame retardant (BFR), is widely applied to various consumer products due to its superior performance and affordable pricing to improve the flame resistance of materials. To better comprehend the pyrolysis behavior of BDE-209 and the evolution process of main pyrolysis products, the thermal degradation mechanism of BDE-209 was studied using density functional theory (DFT) method at the theoretical level of M06/cc-pVDZ, and thermodynamic parameters were calculated in this paper. Unimolecular degradation was dominated by cleavage of the ether linkage, which results in a high yield of hexabromobenzene, and fission of the ortho-position C-Br bond is the main competitive reaction channel. In the system of BDE-209 + H, the pyrolysis reaction is majorly characterized by debromination, leading to the formation of considerable HBr and low-brominated diphenyl ethers. Additionally, the hydrogen-derived splitting of the ether bond acts as a mainly competitive channel, which is the source of polybromophenols and polybromobenzenes. The formation of polybrominated dibenzofuran (PBDF) derives from the cyclization reaction of ortho-phenyl-type radicals, which are readily generated through the ortho-position Br atom abstraction by H radical. The formation of polybrominated dibenzo-p-dioxin (PBDD) involves the ortho-C-O coupling reaction of polybromophenoxy radicals, debromination reaction, and cyclization reaction. And the total yield of PBDD/Fs was significantly increased when H was involved. Results presented in this work will provide the helpful information for the treatment and reuse of BDE-209-containing waste plastics through using pyrolysis technology.

Unintentional formation of mixed chloro-bromo diphenyl ethers (PBCDEs), dibenzo-p-dioxins and dibenzofurans (PBCDD/Fs) from pyrolysis of polybrominated diphenyl ethers (PBDEs)

This study presents the comprehensive investigation for formation pathways of chloro-bromo-mixed products from the pyrolysis of polybrominated diphenyl ethers (PBDEs). In the study, a total of 23 PBDEs with bromination levels from mono-to deca-were selected. Each PBDE standard was sealed in the glass vial and then heated under 450 °C in the muffle furnace to simulate the pyrolysis process. The results demonstrated that PBDEs in the glass vials can unintentionally transform into chloro-bromo diphenyl ethers (PBCDEs) and dibenzo-p-dioxin and dibenzofurans (PBCDD/Fs) during the pyrolysis process. Atmosphere pressure gas chromatography (APGC) coupled with high-resolution mass spectrometry (HRMS) was used to identify these pyrolysis products, which demonstrated that all investigated nPBDEs (n represents the number of bromine substituents) can unintentionally transform into Cl₁-(n-1)BDEs, Cl₂-(n-2)BDEs, Cl₁-(n-1)BDFs, and Cl₁-(n-3)BDDs, while some nPBDEs can transform into Cl₁-(n-2)PBDD/Fs during pyrolysis. Experimental phenomena assisted with density functional theory (DFT) calculations reveal that Cl atom can substitute at C-Br rather than C-H, and Cl₁-(n-1)BDEs can be easily generated by Cl atom attacking at C-Br sites with low energy barriers (3.66-11.9 kcal/mol). In addition, nPBDEs with lower bromination levels are more favorable to generate Cl₁-(n-1)BDEs than those with higher bromination levels. Further DFT calculations suggest that PBDEs are preferentially first transformed into Cl₁-(n-1)BDEs, then subsequentially transform into PBCDD/Fs. We believe the results of this study can greatly improve our understanding of the transformation mechanism from PBDEs to cholo-bromo-mixed products in thermal treatment processes and provide new insight into controlling the emission of toxic cholo-bromo-mixed products.

Polychlorinated dioxins and dibenzofurans (PCDD/F), polybrominated dioxins and dibenzofurans (PBDD/F), polychlorinated biphenyls (PCB), polybrominated diphenyl ethers (PBDE), and per- and polyfluoroalkyl substances (PFAS) in German breast milk samples (LUPE 8)

Most organic pollutants (POP) are persistent in the environment, accumulate in fatty tissues, and so a transfer through the food chain is probably, thereby causing various health effects. We quantified PCDD/F, PBDD/F, PCB, PBDE, perfluorinated substances, and ADONA in breast milk samples collected in two German federal states and breast milk and blood samples from subjects additionally exposed to PFOA. The median (95th percentile) concentrations were 2.43 (6.58) pgWHO₂₀₀₅TEQ/g l.w. for PCDD/F, 2.45 (4.82) pgWHO₂₀₀₅TEQ/g l.w. for dioxin-like PCB (dl-PCB), and 0.62 (2.69) pgWHO₂₀₀₅TEQ/g l.w. for PBDD/F. The relative contributions of the median values of PCDD/F, dl-PCB, and PBDD/F to the total-TEQ were approximately 41%, 42%, and 11%, respectively. Nondioxin-like PCB (ndl-PCB) concentrations were clearly dominated by the higher chlorinated PCB congeners, with medians of 23.2 ng/g l.w. for PCB 153, 13.9 ng/g l.w. for PCB 138, and 13.0 ng/g l.w. for PCB 180. The sum of the 3 congeners (PCB 138, 153, and 180) were multiplied with 1.64 (total PCB) and showed a median of 82.16 ng/g l.w. and a 95th percentile of 173.3 ng/g l.w. Only PFOA and PFOS could be quantified in 29% and 17% of in total 180 samples with 95th percentiles of 53 ng/l and 33 ng/l, respectively. Milk samples (n = 13) from subjects living on PFOA contaminated sites showed higher levels between 33 and 854 ng/l PFOA (mean: 199 ng/l), whilst PFOS could be quantified only in three samples. The sum of 17 PBDE congeners showed medians (95th percentile) of 1737 pg/g l.w. (22,806 pg/g l.w.), with the highest medians of 422 pg/g l.w. for BDE 209 and 378 pg/g l.w. for BDE 153. Overall, our study confirms the declining contamination level in breast milk during the last decade, but points out the need to further reduce the environmental contamination with persistent substances and subsequently the exposure in childhood.

Photoexcitation dynamics of bromodiphenyl ethers in acetonitrile-d3 studied by femtosecond time-resolved infrared spectroscopy

The efficient decomposition of polybrominated diphenyl ethers (PBDEs), onetime prevalent flame retardants, is central to the reduction of their harmful effects on human health. PBDE photodecomposition is a promising method, but its mechanism and products are not well understood. The photoexcitation dynamics of 3- and 4-bromodiphenyl ethers (BDE-2 and BDE-3) in CD₃CN were studied from 0.3 ps to 10 μs using time-resolved infrared spectroscopy. An excitation at 267 nm dissociated the Br atom from BDE-2 and BDE-3 within 0.3 ps and 14 ± 3 ps, respectively, producing a radical compound (R) and a Br atom. About 85% of R formed an intermediate (IM) that weakly interacted with the Br atom and the surrounding CD₃CN solvent in 7-12 ps. The remaining R separated from the dissociated Br and underwent slow geminate rebinding (GR) with Br within 35 to 54 ns. The IM competitively engaged in GR with the interacting Br in 40-60 ps or formed CD₃CN-bound radical compounds (RS) in 100-130 ps. The RS further degraded via either the dissociation of CD₃-producing a cyano-bound diphenyl ether (DE) in 150 or 550 ns-or the deuterium abstraction of CD₃CN in 180 or 430 ns-producing a deuterated DE. Overall, 33 ± 3 (22 ± 3)% of the photoexcited BDE-2 (BDE-3) decomposed in CD₃CN under 267 nm excitation. Efficient binding of the CD₃CN solvent to R deterred the yield-diminishing GR and slowed the rate of product formation. The observed photoexcitation dynamics of BDE suggest methods for the efficient decomposition of PBDE.

Occurrence and formation pathways analysis of PBDD/Fs from 2,4,6-tribromophenol under thermal reaction conditions

Polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) are highly toxic and persistent compounds that provoke a wave of publicity. Bromophenols are important precursors for forming PBDD/Fs, and their reaction path has always been a research hotspot. In this study, the formation characteristic of PBDD/Fs from 2,4,6-TBP were studied. The yields of 2,3,7,8-substituted PBDD/Fs and 2,4,6,8-TBDF for the different thermal products ranged from 0.067 to 10.3 ng/g and 0.207-9.68 ng/g, respectively. The effects of adding Cu, Fe, and Sb₂O₃ were investigated and found to be more inclined to accelerate the formation of ortho-substituted PBDD/Fs than 2,3,7,8-PBDD/Fs. The formation pathways of 2,3,7,8-substituted PBDD/Fs and 2,4,6,8-TBDF were also proposed. 2,4,6,8-TBDF is generated in the C-C coupling reactions of some radical intermediates from the debromination of 2,4,6-TBP. The 2,3,7,8-PBDD/Fs are produced through more complex debromination, bromine substitution, and bromine rearrangement reactions. In addition, various catalytic effects on PBDD/F formation pathways were found, and the catalytic effect of Cu by the Ullmann reaction was the highest, while bromophenol oxidation by Fe was the highest. These results proved that both 2,3,7,8-substituted and non-2,3,7,8-substituted PBDD/Fs would be generated from 2,4,6-TBP, and the effects of the catalyst on the Br substituted position of 2,3,7,8-substituted PBDD/Fs were much lower than the Br-substituted position on bromophenol.

Low-temperature oxidation of monobromobenzene: Bromine transformation and yields of phenolic species

Brominated benzenes and phenols constitute direct precursors in the formation of bromine-bearing pollutants; most notably PBDD/Fs and other dioxin-type compounds. Elucidating accurate mechanisms and constructing robust kinetic models for the oxidative transformation of bromobenzenes and bromophenols into notorious Br-toxicants entail a comprehensive understanding of their initial oxidation steps. However, pertinent mechanistic studies, based on quantum chemical calculations, have only focused on secondary condensation reactions into PBDD/Fs and PBDEs. Literature provide kinetic parameters for these significant reactions, nonetheless, without attempting to compile the acquired Arrhenius coefficients into kinetic models. To fill in this gap, this study sets out to illustrate primary chemical phenomena underpinning the low-temperature combustion of a monobromobenzene molecule (MBZ) based on a detail chemical kinetic model. The main aim is to map out temperature-dependent profiles for major intermediates and products. The constructed kinetic model encompasses several sub-mechanisms (i.e, HBr and benzene oxidation, bromination of phenoxy radicals, and initial reaction of oxygen molecules with MBZ). In light of germane experimental observations, the formulated kinetic model herein offers an insight into bromine speciation, conversion profile of MBZ, and formation of higher brominated congeners of benzene and phenol. For instance, the model satisfactorily accounts for the yields of dibromophenols from oxidation of a 2-bromophenol (2-MBP) molecule, in reference to analogous experimental measurements. From an environmental perspective, the model reflects the accumulation of appreciable loads of 2-bromophenoxy radicals at intermediate temperatures (i.e., a bromine-containing environmental persistent free radical, EPFR) from combustion of MBZ and 2-MBP molecules. Acquired mechanistic/kinetic parameters shall be useful in comprehending the complex bromine transformation chemistry in real scenarios, most notably those prevailing in thermal recycling of brominated flame retardants (BFRs).

A Boron-Containing Compound Acting on Multiple Targets Against Alzheimer's Disease. Insights from Ab Initio and Molecular Dynamics Simulations

Given the multifactorial nature and pathogenesis of Alzheimer's disease, therapeutic strategies are addressed to combine the benefits of every single-target drug into a sole molecule. Quantum mechanics and molecular dynamics (MD) methods were employed here to investigate the multitarget action of a boron-containing compound against Alzheimer's disease. The antioxidant activity as a radical scavenger and metal chelator was explored by means of density functional theory. The most plausible radical scavenger mechanisms, which are hydrogen transfer, radical adduct formation, and single-electron transfer in aqueous and lipid environments, were fully examined. Metal chelation ability was investigated by considering the complexation of Cu(II) ion, one of the metals that in excess can even catalyze the β-amyloid (Aβ) aggregation. The most probable complexes in the physiological environment were identified by considering both the stabilization energy and the shift of the λ^max induced by the complexation. The excellent capability to counteract Aβ aggregation was explored by performing MD simulations on protein-ligand adducts, and the activity was compared with that of curcumin, chosen as a reference.

Environmental characteristics and formations of polybrominated dibenzo-p-dioxins and dibenzofurans

Polybrominated dibenzo-p-dioxins and furans (PBDD/Fs) are emerging persistent organic pollutants (POPs) that have similar or higher toxicities than the notorious dioxins. Toxicities, formation mechanisms, and environmental fates of PBDD/Fs are lacking because accurate quantification, especially of higher brominated congeners, is challenging. PBDD/F analysis is difficult because of photolysis and thermal degradation and interference from polybrominated diphenyl ethers. Here, literatures on PBDD/F analysis and environmental occurrences are reviewed to improve our understanding of PBDD/F environmental pollution and human exposure levels. Although PBDD/Fs behave similarly to dioxins, different congener profiles between PBDD/Fs and dioxins in the environment indicates their different sources and formation mechanisms. Herein, potential sources and formation mechanisms of PBDD/Fs were critically discussed, and current knowledge gaps and future directions for PBDD/F research are highlighted. An understanding of PBDD/F formation pathways will allow for development of synergistic control strategies for PBDD/Fs, dioxins, and other dioxin-like POPs.

Exposure and health risk assessment of secondary contaminants closely related to brominated flame retardants (BFRs): Polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in human milk in shanghai

Polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs), as the secondary environmental pollutants of the widely used brominated flame retardants (BFRs), possess the similar physicochemical and toxic properties as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). However, studies on human body exposure to them are extremely limited. In this study, forty human milk samples collected in Shanghai were measured for 13 PBDD/F congeners using gas chromatography-high resolution mass spectrometry (GC-HRMS), to investigate their exposure level and characteristics, potential source and corresponding health risks to breastfed infants. The results showed no PBDDs but three PBDF congeners including 2,3,7,8-TBDF, 1,2,3,4,6,7,8-HpBDF and OBDF (mean concentration (detection rates) are 3.2 pg/g (72.5%), 9.5 pg/g (100%) and 28 pg/g (67.5%), respectively) were detected. The average toxic equivalent quantity (TEQ, 0.42 pg/g lw) presented the highest concentration level compared to other regions reported. The contribution of PBDFs to the total TEQ of PBDD/Fs and PCDD/Fs is 6.8%. The correlation between PBDD/Fs and age or dietary habits was not observed, which normally existed in their chlorinated analogues-PCDD/Fs. Significant correlations were observed between PBDFs and highly brominated polybrominated diphenyl ethers (PBDEs) (especially for BDE 183 and BDE 209). The correlation between PCDD/Fs and PBDFs was not observed except 2,3,7,8-TBDF. The high PBDFs exposure in Shanghai may originate from the emission of PBDEs and/or non-PBDE BFRs in environment, according to the consistency of the environmental data previously reported. The average estimated dietary intakes (EDI) for breastfed infants is 2.0 pg TEQ/kg·bw/day (0.13-13 pg TEQ/kg·bw/day), within the range of the tolerable daily intake (TDI) for TCDD (1-4 pg TEQ/kg·bw/day) suggested by the World Health Organization (WHO). However, given the high toxicity of PBDD/Fs, the potential health risks of these pollutants for breastfed infants should be of concern.

Free radical scavenging activity of newly designed sesamol derivatives

Recently proposed derivatives of sesamol as better oxidants than the parent molecule are predicted to react faster, with several orders larger rate constants than sesamol itself.

Formation of polybrominated dibenzofurans (PBDFs) and polybrominated diphenyl ethers (PBDEs) from oxidation of brominated flame retardants (BFRs)

Brominated aromatic rings constitute main structural entities in virtually all commercially deployed brominated flame retardants (BFRs). Oxidative decomposition of BFRs liberates appreciable quantities of bromobenzenes (BBzs). This contribution reports experimental measurements for the generation of notorious polybrominated dibenzofurans (PBDFs) and polybrominated diphenyl ethers (PBDEs) from oxidation of monobromobenzene (MBBz). In the light of developed product profiles, we map out reaction pathways and report kinetic parameters for PBDFs and PBDEs formation from coupling reactions of MBBz molecule and its derived ortho-bromophenoxy (o-BPhxy) radical using quantum chemical calculations. The identification and quantitation of product species involve the use of gas chromatograph - triple quadrupole mass spectrometer (GC-QQQMS) operating in the multiple reaction monitoring (MRM) mode. Bimolecular reactions of MBBz and o-BPhxy result in the generation of twelve pre-PBDF intermediates, of which four can also serve as building blocks for the synthesis of PBDEs. These four intermediates are denoted as pre-PBDE/pre-PBDF, with the remaining eight symbolised as pre-PBDF. The resonance-stabilised structure of the o-BPhxy radical accumulates more spin density character on its phenoxy O atom (30.9 %) in reference to ortho-C and para-C sites. Thus, the formation of the pre-PBDE/pre-PBDF structures via O/o-C couplings advances faster as it requires lower activation enthalpies (79.2 - 84.9 kJ mol^-1) than the pre-PBDF moieties, which arise via pairing reactions involving o-C(H or Br)/o-C(H or Br) sites (97.2 - 180.2 kJ mol^-1). Kinetic analysis indicates that, the O/o-C pre-PBDE/pre-PBDF adducts self-eject the out-of-plane H atoms to produce PBDEs, rather than undergo a three-step mechanism forming PBDFs. However, experimental measurements demonstrate PBDEs appearing in lower yields as compared to those of PBDFs; presumably due to H- and Br-induced conversion of the PBDEs into PBDFs following a simple ring-closure reaction. High reaction temperatures facilitate loss of ortho Br atom from PBDEs, followed by cyclisation step to generate PBDFs. PBDFs are observed in a narrow temperature range of 700-850 °C, whereas PBDEs form between 550-850 °C. Since formation mechanisms of PBDFs and polybrominated dibenzo-p-dioxins (PBDDs) are typically only sensitive to the bromination at ortho positions, the results reported herein apply also to higher brominated isomers of BBzs.

Ca2+ mediated mechanism of octa-brominated dioxin/furan formation via BDE-209 thermolysis: Introducing the Mayer bond order difference

Polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) that form during industrial thermal processes, such as the cement kiln co-processing of BDE-209, are highly toxic contaminants. Nevertheless, the formation mechanisms of octa-brominated dioxins/furans (OBDD/Fs), most PBDD/F congeners, and one precursor of the more toxic lower PBDD/Fs from BDE-209 have received little attention. In cement kiln co-processes, the Ca²⁺-mediated regulation of OBDD/F formation is still debated. In this study, simulation experiments revealed that the average brominating degree of PBDD/Fs was 7.8, indicating that OBDD/Fs are dominant congeners (93.6 % median). Density functional theory (DFT) calculations found a new transition state (TS1) with a lower energy barrier than that found in a previous study. Three major OBDD/F formation reactions suggested that the presence of Ca²⁺ was thermodynamically beneficial to the formation of OBDD/Fs. This promotion effect can be attributed to the transfer of electron density leading to a change in the Mayer bond order (MBO) among elements when Ca²⁺ was bound. Intriguingly, in the transition state structures of the Ca²⁺-bound and Ca²⁺-free systems, the MBO difference among the old and new bonds can reveal the difficulty of Ca²⁺-mediated OBDD/F formation reactions from BDE-209.

The formation pathways of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) from pyrolysis of polybrominated diphenyl ethers (PBDEs): Effects of bromination arrangement and level

This study presents comprehensive formation pathways of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) from the pyrolysis of polybrominated diphenyl ethers (PBDEs). A total of 23 PBDE congeners, from mono- to hepta- brominated, were selected to conduct the pyrolysis experiments. The results suggest that n-PBDEs (where n means the number of bromine substituents) can transform into n/(n-1) PBDFs and (n-1)/(n-2) PBDDs as long as they meet certain structural requirement. One single PBDE congener can only transform (if possible) specific PBDF or PBDD based on their specific brominated arrangement by direct/oxygen bridge connecting the two ortho-carbon atoms. Among all selected BDEs, we found that only 2,2',4,4',5,5'-hexaBDE (BDE-153) can transform into 2,3,7,8-tetraBDD, which is most toxic congener among these group of compounds. When the degree of bromination increased, the yield of polybromobenzene increased, while that of the PBDD/Fs decreased, suggesting that the higher PBDEs favors to break the ether bond to form polybromobenzene, while the lower PBDEs favor transformation into PBDD/Fs. We proposed that the results in this study greatly improved our understanding on the transformation of PBDD/Fs from PBDEs in the pyrolysis process.

The formation of PBDFs from the ortho-disubstituted phenol precursors: A comprehensive theoretical study on the PBDD/Fs formation from 2,4,6-tribromophenol

Bromophenols are known as direct precursors of the notorious polybrominated dibenzo-p-dioxin/dibenzofurans (PBDD/Fs). There is a long-held viewpoint that only the more toxic dioxin-type products could be formed from the ortho-disubstituted phenols, totally contrary to the experimental observations that both PBDDs and PBDFs are generated. To tackle the issue, the gaseous formation mechanism of PBDD/Fs from 2,4,6-tribromophenol (TBP), a typical ortho-disubstituted phenol, was investigated in this study. Firstly, the reactions between TBP and the active H radical produce three key radical species including the bromophenoxyl radical, the substituted phenyl radical and phenoxyl diradical. The self- and cross-combinations of these radical species and TBP yield not only the dioxin-type products 1,3,6,8-TeBDD and 1,3,7,9-TeBDD, but also the brominated dibenzofurans 1,3,6,8-TeBDF and 2,4,6,8-TeBDF. Notably, the reactions involving the phenyl C sites in the substituted phenyl and phenoxyl diradicals are demonstrated to be both thermodynamically and kinetically more favorable than those involving the bromophenoxyl radical and the TBP molecule. Most importantly, the findings of the present work are of great importance as it provides feasible pathways to form less toxic dibenzofuran-type products from the ortho-disubstituted phenols. These results will improve the understanding of the PBDD/Fs formation mechanism from phenol precursors.

Photodecomposition properties of brominated flame retardants (BFRs)

This study investigates the geometric and electronic properties of selected BFRs in their ground (S₀) and first singlet excited (S₁) states deploying methods of the density functional theory (DFT) and the time-dependent density functional theory (TDDFT). We estimate the effect of the S₀→ S₁ transition on the elongations of the C-Br bond, identify the frontier molecular orbitals involved in the excitation process and compute partial atomic charges for the most photoreactive bromine atoms. The bromine atom attached to an ortho position in HBB (with regard to C-C bond; 2,2',4,4',6,6'-hexabromobiphenyl), TBBA (with respect to the hydroxyl group; 2,2',6,6'-tetrabromobisphenol A), HBDE and BTBPE (in reference to C-O linkage; 2,2',4,4',6,6'-hexabromodiphenylether and 1,2-bis(2,4,6-tribromophenoxy)ethane, respectively) bears the highest positive atomic charge. This suggests that, these positions undergo reductive debromination reactions to produce lower brominated molecules. Debromination reactions ensue primarily in the aromatic compounds substituted with the highest number of bromine atoms owing to the largest stretching of the C-Br bond in the first excited state. The analysis of the frontier molecular orbitals indicates that, excitations of BFRs proceed via π→π*, or π→σ* or n→σ* electronic transitions. The orbital analysis reveals that, the HOMO-LUMO energy gap (E^H-L) for all investigated bromine-substituted aromatic molecules falls lower (1.85-4.91 eV) than for their non-brominated analogues (3.39-8.07 eV), in both aqueous and gaseous media. The excitation energies correlate with the E^H-L values. The excitation energies and E^H-L values display a linear negative correlation with the number of bromine atoms attached to the molecule. Spectral analysis of the gaseous-phase systems reveals that, the highly brominated aromatics endure lower excitation energies and exhibit red shifts of their absorption bands in comparison to their lower brominated congeners. We attained a satisfactory agreement between the experimentally measured absorption peak (λ_max) and the theoretically predicted oscillator strength (λ_max) for the UV-Vis spectra. This study further confirms that, halogenated aromatics only absorb light in the UV spectral region and that effective photodegradation of these pollutants requires the presence of photocatalysts.

Pathways and influential factors study on the formation of PBDD/Fs during co-processing BDE-209 in cement kiln simulation system

The thermal processes of cement kilns are sources of polybrominated dibenzofurans and dioxins (PBDD/Fs); however, when co-processing decabromodiphenyl ether (BDE-209) soil in cement kilns, very few reports have investigated the mechanism of PBDD/Fs formation from BDE-209. Therefore, the pathways and factors that influence the formation of PBDD/Fs were investigated using Box-Behnken design (BBD) of the response surface methodology (RSM) at lab-scale. The PBDEs, HBr/Br₂ and PBDD/Fs emissions in flue gas from the simulated thermal process were analyzed using gas chromatography/mass spectroscopy (GC/MS), high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS), and ion chromatography (IC). Density functional theory (DFT) was also used to further discuss the formation of PBDD/Fs. The major products of BDE-209 thermal decomposition in flue gas were 97.1% HBr/Br₂ (a.v. 26.6%/70.6%) > 2.7% PBDEs >0.2% PBDD/Fs. Formation of precursors were the main pathways for PBDD/Fs, and those precursors were dominated by higher-brominated PBDEs (heptã deca-BDEs); debromination of BDE-209 was also a crucial pathway for the formation of PBDD/Fs throughout the thermal process. Interestingly, it was easier to form HpBDD/Fs from OBDD/Fs than from PBDEs. The O₂ percentage and interaction factors of O₂ percentage, temperature, and CaCO₃ percentage have the largest influence on PBDD/Fs emissions and formation.

Emission characteristics of polychlorinated, polybrominated and mixed polybrominated/chlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs, PBDD/Fs, and PBCDD/Fs) from waste incineration and metallurgical processes in China

Typical thermal processes are common sources of polychlorinated, polybrominated and mixed polybrominated/chlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs, PBDD/Fs, and PBCDD/Fs); however, very few reports have investigated their coemission. To clarify the emission characteristics of these DD/Fs, two municipal waste incinerators (MWIs), three hazardous waste incinerators (HWIs), one cement kiln coprocessing municipal waste incinerator (CMWI), one secondary copper smelter (SCu), and one iron and steel sintering smelter (ISS) in China were investigated. In total, 17 congeners of PCDD/Fs, 14 congeners of PBDD/Fs, and 12 congeners of PBCDDs in stack flue gases from these thermal processes were analyzed using a high-resolution gas chromatograph/high-resolution mass spectrometer (HRGC/HRMS) in this study. PCDD/Fs, PBDD/Fs and PBCDD/Fs were detectable in all samples, with total concentrations of 911-5.15 × 10³ pg/Nm³ (80.2-414 pg TEQ/Nm³). The concentrations of each DD/F were similar within the same type of facility and varied among different types of facilities. The contributions of PBDD/Fs and PBCDD/Fs to the total concentrations exceeded that of PCDD/Fs in some cases, such as in HWIs and SCu. In general, the ∑Cl_4-7 CDFs and ∑Cl_7-8 CDDs, 1,2,3,4,6,7,8-HpBDF, and 1-B-2,3,7,8-TeCDD and 2-B-1,3,7,8-TeCDD were the dominant congeners in the PCDD/F, PBDD/F, and PBCDD/F mass concentrations, respectively. Several other congeners present at low mass concentrations, such as 1,2,3,4,7,8-HxBDF, have potential as major contributors to the TEQs due to their high toxic equivalency factors. These results reveal the necessity of synergistically inhibiting the occurrences of PCDD/Fs, PBDD/Fs, and PBCDD/Fs from these sources and provide valuable information for use in the source identification of these pollutants in the environment.

Emissions and Occupational Exposure Risk of Halogenated Flame Retardants from Primitive Recycling of E-Waste

The production and usage of non-polybrominated diphenyl ether (PBDE) halogenated flame retardants (HFRs) have substantially increased after the ban of several PBDEs. This has resulted in widespread environmental occurrence of non-PBDE HFRs, further amplified by emissions from primitive recycling of obsolete electronics (e-waste). The present study conducted chamber experiments to characterize 15 HFRs (∑₁₅HFR) from thermal treatment and open burning of typical e-waste. Emission factors of ∑₁₅HFR from thermal treatment were 2.6 × 10⁴-3.9 × 10⁵ ng g^-1, slightly higher than those from open burning (8.8 × 10³-1.0 × 10⁵ ng g^-1). Greater output over input mass ratios of ∑₁₅HFR were obtained in thermal treatment than in open burning. Particulate and gaseous HFRs dominated the emissions in thermal treatment and open burning, respectively, largely because of the different temperatures used in the two processes. Particulate HFRs were primarily affiliated with fine particles (D_p < 1.8 μm) peaking at 0.56-1.0 or 0.32-0.56 μm in both thermal treatment and open burning. Occupational exposure to most FRs was relatively low, but several PBDEs may pose potential health risk to workers in e-waste home-workshops. Potentially accruing emissions and health risks of non-PBDE HFRs from primitive recycling of e-waste remain a great concern.

Thermochemical formation of multiple unintentional persistent organic pollutants on metallurgical fly ash and their correlations

Metallurgical processes are currently the predominant anthropogenic sources of multiple unintentional persistent organic pollutants (POPs), including polycyclic aromatic hydrocarbons (PAHs), chlorinated and brominated PAHs (Cl-PAHs and Br-PAHs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), and polybrominated diphenyl ether (PBDEs). Understanding the formation of multiple POPs is important for source control. These POPs could be formed through fly ash-mediated heterogeneous reactions. In this study, we comprehensively investigated the thermochemical (150-450 °C) formation of these POPs on fly ash samples collected from a secondary aluminum smelter, secondary lead smelter, and iron ore sintering plant. The maximum concentrations of PCNs and PCBs were 154.5 and 181.3 times those in the original fly ash, respectively. Formation variations of PAHs, Cl-PAHs and Br-PAHs, and PBDEs were different from that of PCBs and PCNs. The PAHs concentration, which was the highest among the POPs in the original fly ash, decreased sharply by 95% at 150 °C. The ∑₁₉Cl-PAHs and ∑₁₉Br-PAHs increased marginally at 250 °C before decreasing slightly at 350 °C. The PBDE concentrations decreased under 250 °C and increased at 350 °C. PCNs, PCBs, and PCDD/Fs showed good correlations, all of which had a negative relationship with the PAHs. There were no significant correlations between PAHs and Cl/Br-PAHs. Low brominated congeners could be formed by destruction of higher brominated congeners because of thermal instability of the PBDEs.

Transformation of gaseous 2-bromophenol on clay mineral dust and the potential health effect

Iron-bearing clays are ubiquitously distributed as mineral dusts in the atmosphere. Bromophenols were reported as the major products from thermal decomposition of the widely used brominated flame retardants (BFRs). However, little information is available for the reactivity of iron associated with mineral dusts to interact with the atmospheric bromophenols and the subsequent toxic effects. Herein, three common clay minerals (montmorillonite, illite and kaolinite) were used to simulate mineral dusts, and the reactions with gaseous 2-bromophenol were systematically investigated under environmentally relevant atmospheric conditions. Our results demonstrate that structural Fe(III) in montmorillonite and Fe(III) from iron oxide in illite mediated the dimerization of 2-bromophenol to form hydroxylated polybrominated biphenyl and hydroxylated polybrominated diphenyl ether. The surface reaction is favored to occur at moisture environment, since water molecules formed complex with 2-bromophenol and the reaction intermediates via hydrogen bond to significantly lower the reaction energy and promote the dimerization reaction. More importantly, the formed dioxin-like products on clay mineral dust increased the toxicity of the particles to A549 lung cell by decreasing cell survival and damaging cellular membrane and proteins. The results of this study indicate that not only mineral dust itself but also the associated surface reaction should be fully considered to accurately evaluate the toxic effect of mineral dust on human health.

Melatonin and its metabolites as chemical agents capable of directly repairing oxidized DNA

Oxidative stress mediates chemical damage to DNA yielding a wide variety of products. In this work, the potential capability of melatonin and several of its metabolites to repair directly (chemically) oxidative lesions in DNA was explored. It was found that all the investigated molecules are capable of repairing guanine-centered radical cations by electron transfer at very high rates, that is, diffusion-limited. They are also capable of repairing C-centered radicals in the sugar moiety of 2'-deoxyguanosine (2dG) by hydrogen atom transfer. Although this was identified as a rather slow process, with rate constants ranging from 1.75 to 5.32 × 10²  M^-1 s^-1 , it is expected to be fast enough to prevent propagation of the DNA damage. Melatonin metabolites 6-hydroxymelatonin (6OHM) and 4-hydroxymelatonin (4OHM) are also predicted to repair OH adducts in the imidazole ring. In particular, the rate constants corresponding to the repair of 8-OH-G adducts were found to be in the order of 10⁴  M^-1 s^-1 and are assisted by a water molecule. The results presented here strongly suggest that the role of melatonin in preventing DNA damage might be mediated by its capability, combined with that of its metabolites, to directly repair oxidized sites in DNA through different chemical routes.

Release and Transformation of BTBPE During the Thermal Treatment of Flame Retardant ABS Plastics

Thermal scenarios inevitably occur during the lifecycle of engineering plastics laden with brominated flame retardants (BFRs). However, little information on the fate of embedded BFRs during the thermal processes is available. In this study, we measured the release and transformation of a typical BFR, 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), during the thermal treatment of acrylonitrile butadiene styrene (ABS) plastics. The possible thermal scenarios were simulated by varying the heating temperature and atmosphere. The maximum release rate of BTBPE was observed at 350 °C. A release kinetic model was developed to explore the mechanism of BTBPE release while heating ABS. Material-phase diffusion was found to be the rate-determining step during release. According to the developed release model, it was estimated that 0.04-0.17% of embedded BTBPE could be released to air during the industrial processing of ABS plastics. When the heating temperature was ≥350 °C, approximately 15-56% of embedded BTBPE decomposed to bromophenols (BPs) and 1,3,5-tribromo-2-(vinyloxy) benzene (TBVOB), and the decomposition followed a first-order kinetics at 350 °C. Polybrominated dibenzo- p-dioxins and dibenzofurans (PBDD/Fs) were also significantly formed at ≥350 °C from BPs and TBVOB via a precursor mechanism. A higher temperature (≥450 °C) was favorable for the formation of PBDFs.

Emissions, environmental levels, sources, formation pathways, and analysis of polybrominated dibenzo-p-dioxins and dibenzofurans: a review

Polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) were labeled potential persistent organic pollutants by the Stockholm Convention and have structures and toxicities similar to those of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), which has caused considerable concern. This article reviews the current available literature on the status, sources, formation pathways, and analysis of PBDD/Fs. PBDD/Fs are widely generated in industrial thermal processes, such as those for brominated flame retardant (BFR) products, e-waste dismantling, metal smelting processes, and waste incineration. PBDD/Fs can form via the following routes: precursor formation, de novo formation, biosynthesis, and natural formation. The levels of PBDD/Fs in the environment and in organisms and humans have increased due to extensive consumption and the increasing inventory of BFRs; thus, the risk of human exposure to PBDD/Fs is expected to be high.

The reactions of plant hormones with reactive oxygen species: chemical insights at a molecular level

The reactions of two plant hormones, namely jasmonic acid (JA) and methyl jasmonate (MJ), with different reactive oxygen species (ROS) were investigated using the density functional theory. Different reaction sites and mechanisms were explored, as well as solvents of different polarity, and pH in aqueous solution. The thermochemical viability and kinetics of the investigated reaction pathways were found to be strongly influenced by the reacting ROS. All the investigated pathways were found to be exergonic, both in aqueous and lipid solution and for both JA and MJ, when the reactions involve ^•OH and ^•OCH₃. On the contrary, for the reactions with peroxy radicals (^•OOH and ^•OOCH₂CHCH₂) only a few hydrogen transfer pathways were found to be thermochemically viable. The reactions involving ^•OH were found to be diffusion-controlled, with both JA and MJ, regardless of the polarity of the solvent. This led to the hypothesis that the direct ^•OH scavenging activity of JA and MJ might play a role in the beneficial effects of the jasmonate family regarding the antioxidant defense of plants against metal-induced oxidative stress. The deprotonated fraction of JA is, to some extent, more reactive than the neutral fraction toward ROS. This, together with the acid-base equilibria inherent to some ROS, make the pH an influential environmental factor on the overall reactivity of JA toward ROS.

Advances in Flame Retardant Poly(Lactic Acid)

PLA has become a commodity polymer with wide applications in a number of fields. However, its high flammability with the tendency to flow in fire has limited its viability as a perfect replacement for the petrochemically-engineered plastics. Traditional flame retardants, which may be incorporated into PLA without severely degrading the mechanical properties, are the organo-halogen compounds. Meanwhile, these compounds tend to bioaccumulate and pose a risk to flora and fauna due to their restricted use. Research into PLA flame retardants has largely focused on organic and inorganic compounds for the past few years. Meanwhile, the renewed interest in the development of environmentally sustainable flame retardants (FRs) for PLA has increased significantly in a bid to maintain the integrity of the polymer. A review on the development of new flame retardants for PLA is presented herein. The focus is on metal oxides, phosphorus-based systems, 2D and 1D nanomaterials, hyperbranched polymers, and their combinations, which have been applied for flame retarding PLA are discussed. The paper also reviews briefly the correlation between FR loadings and efficiency for various FR systems, and their effects on processing and mechanical properties.

Comprehensive Investigation of the Antioxidant and Pro-oxidant Effects of Phenolic Compounds: A Double-Edged Sword in the Context of Oxidative Stress?

Oxidative stress (OS) is a health-threatening process that is involved, at least partially, in the development of several diseases. Although antioxidants can be used as a chemical defense against OS, they might also exhibit pro-oxidant effects, depending on environmental conditions. In this work, such a dual behavior was investigated for phenolic compounds (PhCs) within the framework of the density functional theory and based on kinetic data. Multiple reaction mechanisms were considered in both cases. The presence of redox metals, the pH, and the possibility that PhCs might be transformed into benzoquinones were identified as key aspects in the antioxidant versus pro-oxidant effects of these compounds. The main virtues of PhCs as antioxidants are their radical trapping activity, their regeneration under physiological conditions, and their behavior as OH-inactivating ligands. The main risks of PhCs as pro-oxidants are predicted to be the role of phenolate ions in the reduction of metal ions, which can promote Fenton-like reactions, and the formation of benzoquinones that might cause protein arylation at cysteine sites. Although the benefits seem to overcome the hazards, to properly design chemical strategies against OS using PhCs, it is highly recommended to carefully explore their duality in this context.

Effects of Desulfurization Processes on Polybrominated Dibenzo- p-dioxin and Dibenzofuran Emissions from Iron Ore Sintering

Installing desulfurization operations and closing outdated facilities can effectively decrease pollutant emissions from iron ore sintering plants (IOSPs). Polybrominated dibenzo- p-dioxin and dibenzofuran (PBDD/F) emissions from different-sized IOSPs with different desulfurization operations were analyzed. The desulfurization operations' PBDD/F removal efficiencies were 53.6%-97.1%, and were higher for wet desulfurization operations than for semidry and dry operations. The removed PBDD/Fs were transferred to the desulfurization products. The removal efficiencies of PBDF homologues increased with the degree of bromination. A PBDD/F emission inventory for Chinese IOSPs was compiled. PBDD/F emissions in stack gases, desulfurization products, and discarded fly ash (previously ignored) from 2003 to 2015 were 1218, 400, and 245 g toxic equivalents, respectively. PBDD/F concentrations in stack gases and fly ash were higher for small IOSPs (<90 m²), indicating the importance of phasing them out. Indeed, in China, such phasing out decreased PBDD/F emissions in stack gases, desulfurization products, and discarded fly ash by 1021, 891, and 3253 g toxic equivalents, respectively, between 2003 and 2015. PBDD/F emissions in stack gases have been controlled in Chinese regions with the highest emissions, but PBDD/F emissions in desulfurization products and fly ash are increasing.

Photodebromination behaviors of polybrominated diphenyl ethers in methanol/water systems: Mechanisms and predicting descriptors

This study investigated the photodebromination behaviors of polybrominated diphenyl ethers (PBDEs) in methanol or methanol/water systems. The kinetics of three sets of bromated diphenyl ether (BDE) isomers were compared in the same reactors, and the results showed that the PBDE isomers with lower energy of lowest unoccupied molecular orbital and higher energy of highest occupied molecular orbital will be degraded faster by ultraviolet (UV) light than other BDE isomers. The overall debromination pathways of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) were elucidated, and we found that the bromine substituents with higher Mulliken charges were preferentially removed. This demonstrated that Mulliken charges can be used to predict the photodebromination pathways of PBDEs. In methanol/water systems, when the ratio of methanol and water decreased, the degradation rate of BDE-47 decreased, whereas that of diphenyl ether increased. This phenomenon can be attributed to the mechanism of photodegradation of PBDEs gradually shifting from the reductive debromination to the undebromination process as the ratio of methanol and water decreases. The chromatogram of high-performance liquid chromatography and gas chromatography-mass spectrometry during this process also verified this explanation. The debromination pathways of BDE-47 are consistent in methanol/water systems with different methanol to water ratios and in different organic solvents.

Thermal Oxidation Degradation of 2,2',4,4'-Tetrabromodiphenyl Ether over LiαTiOx Micro/Nanostructures with Dozens of Oxidative Product Analyses and Reaction Mechanisms

Flowerlike Li_αTiO_x micro/nanostructures were successfully synthesized to degrade 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) at 250-350 °C. The pseudo-first-order kinetics rate constant of the reaction at 300 °C was in the range of 0.034-0.055 min^-1. The activation energy was as low as 39.9-48.1 kJ/mol. The excellent performance attained over Li_αTiO_x was attributed to Li dopant having the electron-donating effect, which enhanced the oxygen species mobility. The oxidative reaction was believed to be the dominant degradation pathway following the Mars-van Krevelen mechanism, being accompanied by the weak hydrodebromination occurrence generating the trace mono- to tri-BDEs. More than 70 types of oxidation products containing diphenyl ether backbone, single-benzene rings, and ring-opened products were detected by GC-MS with derivatization, ESI-FT-ICR-MS, and ion chromatography. An increase in the number of ring-cracked oxidative products under prolonged reaction was observed by ESI-FT-ICR-MS analysis according to the van Krevelen diagram. In the oxidative reaction, a series of oxidative products, such as OH-tri-BDEs and OH-tetra-BDEs, first formed via the nucleophilic O^2- attack and subsequently transformed into dibromophenol, tribromophenol, and benzenedicarboxylic and benzoic acids, etc. They could be further attacked by electrophilic O₂^- and O^- and completely cracked to small molecules such as formic, acetic, propionic, and butyric acids.

Characterization and inventory of PBDD/F emissions from deca-BDE, polyethylene (PE) and metal blends during the pyrolysis process

The thermal treatment of waste electrical and electronic equipment (WEEE) is regarded as the largest potential contributor to the environmental release of polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs). Herein, the pyrolysis of decabromodiphenyl ether (deca-BDE), polyethylene (PE) and metal blends was conducted to investigate the emission characteristics of PBDD/Fs at different thermal treatment conditions. The total yield of polybrominated dibenzo-p-dioxins (PBDDs) was less than that of polybrominated dibenzofurans (PBDFs) during the pyrolysis of the PE matrix and metal blends. 2,3,7,8-TBDF and 1,2,3,7,8-PBDF were the dominant congeners emitted from the pyrolysis. Temperature, presence of oxygen and type of added metal were the critical influencing factors for the PBDD/F formation rates and speciation in the pyrolysis process.

Atmospheric chemical reaction mechanism and kinetics of 1,2-bis(2,4,6-tribromophenoxy)ethane initiated by OH radical: a computational study

The mechanism and kinetics of OH-initiated oxidation of BTBPE, an alternative of PBDEs, were investigated.

How PBDEs Are Transformed into Dihydroxylated and Dioxin Metabolites Catalyzed by the Active Center of Cytochrome P450s: A DFT Study

Predicting metabolism of chemicals and potential toxicities of relevant metabolites remains a vital and difficult task in risk assessment. Recent findings suggested that polybrominated diphenyl ethers (PBDEs) can be transformed into dihydroxylated and dioxin metabolites catalyzed by cytochrome P450 enzymes (CYPs), whereas the mechanisms pertinent to these transformations remain largely unknown. Here, by means of density functional theory (DFT) calculations, we probed the metabolic pathways of 2,2',4,4'-tetraBDE (BDE-47) using the active center model of CYPs (Compound I). Results show that BDE-47 is first oxidized to monohydroxylated products (HO-BDEs), wherein a keto-enol tautomerism is identified for rearrangement of the cyclohexenone intermediate. Dihydroxylation with HO-BDEs as precursors, has a unique phenolic H-abstraction and hydroxyl rebound pathway that is distinct from that for monohydroxylation, which accounts for the absence of epoxides in in vitro studies. Furthermore, we found only dihydroxylated PBDEs with heterophenyl -OH substituents ortho- and meta- to the ether bond serve as precursors for dioxins, which are evolved from aryl biradical coupling of diketone intermediates that are produced from dehydrogenation of the dihydroxylated PBDEs by Compound I. This study may enlighten the development of computational models that afford mechanism-based prediction of the xenobiotic biotransformation catalyzed by CYPs.

Thermochemical Formation of Polybrominated Dibenzo-p-Dioxins and Dibenzofurans Mediated by Secondary Copper Smelter Fly Ash, and Implications for Emission Reduction

Heterogeneous reactions mediated by fly ash are important to polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/Fs) formation. However, the formation of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) through heterogeneous reactions is not yet well understood. Experiments were performed to investigate the thermochemical formation of PBDD/Fs at 150-450 °C through heterogeneous reactions on fly ash from a secondary copper smelter. The maximum PBDD/F concentration was 325 times higher than the initial PBDD/F concentration in the fly ash. The PBDD/F concentration after the experiment at 150 °C was five times higher than the initial concentration. PBDD/Fs have not previously been found to form at such a low temperature. Secondary-copper-smelter fly ash clearly promoted PBDD/F formation, and this conclusion was supported by the low activation energies that were found in Arrhenius's law calculations. Thermochemical formation of PBDD/Fs mediated by fly ash deposited in industrial facilities could explain "memory effects" that have been found for PCDD/Fs and similar compounds released from industrial facilities. Abundant polybrominated diphenyl ethers (PBDEs) that were formed through fly ash-mediated reactions could be important precursors for PBDD/Fs also formed through fly ash-mediated reactions. The amounts of PBDEs that formed through fly ash-mediated reactions suggested that secondary copper smelters could be important sources of reformed PBDEs.

Lab-scale thermal analysis of electronic waste plastics

In this work, we experimentally revealed the thermochemical decomposition pathway of Decabromodiphenyl ethane (DBDPE) and tetrabromobisphenol A (TBBPA) containing electronic waste plastics using an online thermogravimetric-fourier transform infrared-mass spectroscopy (TG-FTIR-MS) system, a high resolution gas chromatography/high resolution mass (HRGC-MS) spectroscopy, and a fixed-bed reactor. We found the distribution and species of produced bromides can be easily controlled by adjusting pyrolytic temperature, which is particularly crucial to their recycle. From the analysis of the liquid and solid phase obtained from the fixed-bed reactor, we proposed that the Br radicals formed during the pyrolysis process may be captured by organic species derived from the depolymerization of plastics to form brominated compounds or by the inorganic species in the plastics, and that these species remained in the char residue after pyrolysis. Our work for the first time demonstrates intramolecular oxygen atoms play a pivotal role in the formation of PBDD/Fs that pyrolysis of oxygen-free BFRs is PBDD/Fs-free, whereas pyrolysis of oxygen-containing BFRs is PBDD/Fs-reduced.

Airborne polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins/furans (PBDD/Fs), and dechlorane plus (DP) in concentrated vehicle parking areas

This study investigated polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins/furans (PBDD/Fs), and dechlorane plus (DP) in air around three concentrated vehicle parking areas (underground, indoor, and outdoor) in a metropolitan of South China. The parking areas showed higher concentrations of PBDEs, PBDD/Fs, and DP than their adjacent urban area or distinct congener/isomer profiles, which indicate their local emission sources. The highest PBDE and DP concentrations were found in the outdoor parking lot, which might be related to the heating effect of direct sunlight exposure. Multi-linear regression analysis results suggest that deca-BDEs without noticeable transformation contributed most to airborne PBDEs in all studied areas, followed by penta-BDEs. The statistically lower anti-DP fractions in the urban area than that of commercial product signified its degradation/transformation during transportation. Neither PBDEs nor vehicle exhaust contributed much to airborne PBDD/Fs in the parking areas. There were 68.1-100 % of PBDEs, PBDD/Fs, and DP associated with particles. Logarithms of gas-particle distribution coefficients (K ps) of PBDEs were significantly linear-correlated with those of their sub-cooled vapor pressures (p Ls) and octanol-air partition coefficients (K OAs) in all studied areas. The daily inhalation doses of PBDEs, DP, and PBDD/Fs were individually estimated as 89.7-10,741, 2.05-39.4, and 0.12-4.17 pg kg(-1) day(-1) for employees in the parking areas via Monte Carlo simulation.

Photodecomposition of bromophenols

Photodecomposition of bromophenols (BPs) represents a potent channel of debromination and elimination of these species in the environment. From this perspective, the present contribution reports geometrical parameters, electronic absorption spectra and excited states of the complete series of BPs in their ground state (S0), as well as their first singlet exited state (S1). We calculate excitation energies for S0 → S1 transition within the framework of the time-dependent density functional theory (TDDFT). We estimate and discuss charges on bromine atoms and HOMO-LUMO energy gaps (E(H-L)) as molecular descriptors for the photoreactivity of BPs and photo-induced debromination mechanism of BPs. Spectral patterns reveal that, as the degree of bromination increases, peaks of absorption spectra red-shift toward wavelengths near 300 nm, for the pentabrominated phenol. Based on the analysis of optimised geometries and Hirshfeld's atomic charges, photodebromination of BPs commences via the loss of an ortho Br atom. The excitation energies decrease linearly with increasing number of bromine atoms. This indicates that, higher brominated congeners of BPs photodecompose more readily than lower brominated congeners.