Bacterial release from pipe biofilm in a full-scale drinking water distribution system

The effects of methylparaben exposure on biofilm tolerance to chlorine disinfection

Parabens are emerging contaminants that have been detected in drinking water. Their presence in DW distribution systems (DWDS) can alter bacterial behaviour, characteristics, and structure, which may compromise DW disinfection. This work provides insights into the impact of methylparaben (MP) on the tolerance to chlorine disinfection and antibiotics from dual-species biofilms formed by Acinetobacter calcoaceticus and Stenotrophomonas maltophilia isolated from DW and grown on high-density polyethylene (HDPE) and polypropylene (PPL). Results showed that dual-species biofilms grown on PPL were more tolerant to chlorine disinfection, expressing a decrease of over 50 % in logarithmic reduction values of culturable cells in relation to non-exposed biofilms. However, bacterial tolerance to antibiotics was not affected by MP presence. Although MP-exposed dual-species biofilms grown on HDPE and PPL were metabolically more active than non-exposed counterparts, HDPE seems to be the material with lower impact on DW risk management and disinfection, if MP is present. Overall, results suggest that MP presence in DW may compromise chlorine disinfection, and consequently affect DW quality and stability, raising potential public health issues.

Complex impact of metals on the fate of disinfection by-products in drinking water pipelines: A systematic review

Metals in the drinking water distribution system (DWDS) play an important role on the fate of disinfection by-products (DBPs). They can increase the formation of DBPs through several mechanisms, such as enhancing the proportion of reactive halogen species (RHS), catalysing the reaction between natural organic matter (NOM) and RHS through complexation, or by increasing the conversion of NOM into DBP precursors. This review comprehensively summarizes these complex processes, focusing on the most important metals (copper, iron, manganese) in DWDS and their impact on various DBPs. It organizes the dispersed 'metals-DBPs' experimental results into an easily accessible content structure and presents their underlying common or unique mechanisms. Furthermore, the practically valuable application directions of these research findings were analysed, including the toxicity changes of DBPs in DWDS under the influence of metals and the potential enhancement of generalization in DBP model research by the introduction of metals. Overall, this review revealed that the metal environment within DWDS is a crucial factor influencing DBP levels in tap water.

Full-length 16S rRNA gene sequencing reveals the operating mode and chlorination-aggravated SWRO biofouling at a nuclear power plant

Reverse osmosis (RO) membrane fouling and biological contamination problems faced by seawater desalination systems are microbiologically related. We used full-length 16S rRNA gene sequencing to assess the bacterial community structure and chlorine-resistant bacteria (CRB) associated with biofilm growth in different treatment processes under the winter mode of a chlorinated seawater desalination system in China. At the outset of the winter mode, certain CRB, such as Acinetobacter, Pseudomonas, and Bacillus held sway over the bacterial community structure, playing a pivotal role in biofouling. At the mode's end, Deinococcus and Paracoccus predominated, with Pseudomonas and Roseovarius following suit, while certain CRB genera still maintained their dominance. RO and chlorination are pivotal factors in shaping the bacterial community structure and diversity, and increases in total heterotrophic bacterial counts and community diversity in safety filters may adversely affect the effectiveness of subsequent RO systems. Besides, the bacterial diversity and culturable biomass in the water produced by the RO system remain high, and some conditionally pathogenic CRBs pose a certain microbial risk as a source of drinking water. Targeted removal of these CRBs will be an important area of research for advancing control over membrane clogging and ensuring water quality safety in the future.

Impact of operational conditions on drinking water biofilm dynamics and coliform invasion potential

Biofilms within drinking water distribution systems serve as a habitat for drinking water microorganisms. However, biofilms can negatively impact drinking water quality by causing water discoloration and deterioration and can be a reservoir for unwanted microorganisms. In this study, we investigated whether indicator organisms for drinking water quality, such as coliforms, can settle in mature drinking water biofilms. Therefore, a biofilm monitor consisting of glass rings was used to grow and sample drinking water biofilms. Two mature drinking water biofilms were characterized by flow cytometry, ATP measurements, confocal laser scanning microscopy, and 16S rRNA sequencing. Biofilms developed under treated chlorinated surface water supply exhibited lower cell densities in comparison with biofilms resulting from treated groundwater. Overall, the phenotypic as well as the genotypic characteristics were significantly different between both biofilms. In addition, the response of the biofilm microbiome and possible biofilm detachment after minor water quality changes were investigated. Limited changes in pH and free chlorine addition, to simulate operational changes that are relevant for practice, were evaluated. It was shown that both biofilms remained resilient. Finally, mature biofilms were prone to invasion of the coliform, Serratia fonticola. After spiking low concentrations (i.e., ±100 cells/100 mL) of the coliform to the corresponding bulk water samples, the coliforms were able to attach and get established within the mature biofilms. These outcomes emphasize the need for continued research on biofilm detachment and its implications for water contamination in distribution networks.

IMPORTANCE

The revelation that even low concentrations of coliforms can infiltrate into mature drinking water biofilms highlights a potential public health concern. Nowadays, the measurement of coliform bacteria is used as an indicator for fecal contamination and to control the effectiveness of disinfection processes and the cleanliness and integrity of distribution systems. In Flanders (Belgium), 533 out of 18,840 measurements exceeded the established norm for the coliform indicator parameter in 2021; however, the source of microbial contamination is mostly unknown. Here, we showed that mature biofilms, are susceptible to invasion of Serratia fonticola. These findings emphasize the importance of understanding and managing biofilms in drinking water distribution systems, not only for their potential to influence water quality, but also for their role in harboring and potentially disseminating pathogens. Further research into biofilm detachment, long-term responses to operational changes, and pathogen persistence within biofilms is crucial to inform strategies for safeguarding drinking water quality.

Influence of drinking water biofilm microbiome on water quality: Insights from a real-scale distribution system

Biofilms, constituting over 95 % of the biomass in drinking water distribution systems, form an ecosystem impacting both the aesthetic and microbiological quality of water. This study investigates the microbiome of biofilms within a real-scale drinking water distribution system in eastern Spain, utilizing amplicon-based metagenomics. Forty-one biofilm samples underwent processing and sequencing to analyze both bacterial and eukaryotic microbiomes, with an assessment of active biomass. Genus-level analysis revealed considerable heterogeneity, with Desulfovibrio, Ralstonia, Bradyrhizobium, Methylocystis, and Bacillus identified as predominant genera. Notably, bacteria associated with corrosion processes, including Desulfovibrio, Sulfuricella, Hyphomicrobium, and Methylobacterium, were prevalent. Potentially pathogenic bacteria such as Helicobacter, Pseudomonas, and Legionella were also detected. Among protozoa, Opisthokonta and Archaeplastida were the most abundant groups in biofilm samples, with potential pathogenic eukaryotes (Acanthamoeba, Naegleria, Blastocystis) identified. Interestingly, no direct correlation between microbiota composition and pipe materials was observed. The study suggests that the usual concentration of free chlorine in bulk water proved insufficient to prevent the presence of undesirable bacteria and protozoa in biofilms, which exhibited a high concentration of active biomass.

Wettability and Bactericidal Properties of Bioinspired ZnO Nanopillar Surfaces

Nanomaterials of zinc oxide (ZnO) exhibit antibacterial activities under ambient illumination that result in cell membrane permeability and disorganization, representing an important opportunity for health-related applications. However, the development of antibiofouling surfaces incorporating ZnO nanomaterials has remained limited. In this work, we fabricate superhydrophobic surfaces based on ZnO nanopillars. Water droplets on these superhydrophobic surfaces exhibit small contact angle hysteresis (within 2-3°) and a minimal tilting angle of 1°. Further, falling droplets bounce off when impacting the superhydrophobic ZnO surfaces with a range of Weber numbers (8-46), demonstrating that the surface facilitates a robust Cassie-Baxter wetting state. In addition, the antibiofouling efficacy of the surfaces has been established against model pathogenic Gram-positive bacteria Staphylococcus aureus (S. aureus) and Gram-negative bacteria Escherichia coli (E. coli). No viable colonies of E. coli were recoverable on the superhydrophobic surfaces of ZnO nanopillars incubated with cultured bacterial solutions for 18 h. Further, our tests demonstrate a substantial reduction in the quantity of S. aureus that attached to the superhydrophobic ZnO nanopillars. Thus, the superhydrophobic ZnO surfaces offer a viable design of antibiofouling materials that do not require additional UV illumination or antimicrobial agents.

The removal of pathogenic bacteria and dissolved organic matter from freshwater using microporous membranes: insights into biofilm formation and fouling reversibility

Pathogenic bacteria in drinking-water pose a health risk to consumers, as they compromise the quality of portable water. Chemical disinfection of water containing dissolved organic matter (DOM) causes harmful disinfection by-products. In this work, 4-hydroxybenzoic acid (4-HBA) blended polyethersulfone membranes were fabricated and characterised using microscopic and spectroscopic techniques. The membranes were evaluated for the removal of bacteria and DOM from synthetic and environmental water. Permeate flux increased from 287.30 to 374.60 l m-2 h-1 at 3 bars when 4-HBA increased from 0 to 1.5 wt.%, suggesting that 4-HBA influenced the membrane's affinity for water. Furthermore, 4-HBA demonstrated antimicrobial properties by inhibiting bacterial growth. The membrane with 1 wt.% 4-HBA recorded 99.4 and 100% bacteria removal in synthetic and environmental water, respectively. Additionally, DOM removal of 55-73% was achieved. A flux recovery ratio (FRR) of 94.6% was obtained when a mixture of bacteria and humic acid was filtered, implying better fouling layer reversibility during cleaning. Furthermore, 100% FRR was achieved when a multimedia granular filtration step was installed prior to membrane filtration. The results illustrated that the membranes had a high permeate flux with low irreversible fouling. This indicated the potential of the membranes in treating complex feed streams using simple cleaning protocols.

Microbial anti-biofilms: types and mechanism of action

Biofilms have been recognized as a serious threat to public health as it protects microbes from antimicrobials, immune defence mechanisms, chemical treatments and nutritional stress. Biofilms are also a source of concern in industries and water treatment because their presence compromises the integrity of equipment. To overcome these problems, it is necessary to identify novel anti-biofilm compounds. Products of microorganisms have been identified as promising broad-spectrum anti-biofilm agents. These natural products include biosurfactants, antimicrobial peptides, enzymes and bioactive compounds. Anti-biofilm products of microbial origin are chemically diverse and possess a broad spectrum of activities against biofilms. The objective of this review is to give an overview of the different types of microbial anti-biofilm products and their mechanisms of action.

Plasmids, a molecular cornerstone of antimicrobial resistance in the One Health era

Antimicrobial resistance (AMR) poses a substantial threat to human health. The widespread prevalence of AMR is, in part, due to the horizontal transfer of antibiotic resistance genes (ARGs), typically mediated by plasmids. Many of the plasmid-mediated resistance genes in pathogens originate from environmental, animal or human habitats. Despite evidence that plasmids mobilize ARGs between these habitats, we have a limited understanding of the ecological and evolutionary trajectories that facilitate the emergence of multidrug resistance (MDR) plasmids in clinical pathogens. One Health, a holistic framework, enables exploration of these knowledge gaps. In this Review, we provide an overview of how plasmids drive local and global AMR spread and link different habitats. We explore some of the emerging studies integrating an eco-evolutionary perspective, opening up a discussion about the factors that affect the ecology and evolution of plasmids in complex microbial communities. Specifically, we discuss how the emergence and persistence of MDR plasmids can be affected by varying selective conditions, spatial structure, environmental heterogeneity, temporal variation and coexistence with other members of the microbiome. These factors, along with others yet to be investigated, collectively determine the emergence and transfer of plasmid-mediated AMR within and between habitats at the local and global scale.

Parabens as environmental contaminants of aquatic systems affecting water quality and microbial dynamics

Among different pollutants of emerging concern, parabens have gained rising interest due to their widespread detection in water sources worldwide. This occurs because parabens are used in personal care products, pharmaceuticals, and food, in which residues are generated and released into aquatic environments. The regulation of the use of parabens varies across different geographic regions, resulting in diverse concentrations observed globally. Concentrations of parabens exceeding 100 μg/L have been found in wastewater treatment plants and surface waters while drinking water (DW) sources typically exhibit concentrations below 6 μg/L. Despite their low levels, the presence of parabens in DW is a potential exposure route for humans, raising concerns for both human health and environmental microbiota. Although a few studies have reported alterations in the functions and characteristics of microbial communities following exposure to emerging contaminants, the impact of the exposure to parabens by microbial communities, particularly biofilm colonizers, remains largely understudied. This review gathers the most recent information on the occurrence of parabens in water sources, as well as their effects on human health and aquatic organisms. The interactions of parabens with microbial communities are reviewed for the first time, filling the knowledge gaps on the effects of paraben exposure on microbial ecosystems and their impact on disinfection tolerance and antimicrobial resistance, with potential implications for public health.

Drinking Pipes and Nipple Drinkers in Pig Abattoir Lairage Pens-A Source of Zoonotic Pathogens as a Hazard to Meat Safety

The water distribution system in the lairage pens of abattoirs could act as a route of contamination for produced meat. In this study, biofilm formation and the occurrence of specific pathogens in drinking equipment was investigated in different lairage pens in a German commercial pig abattoir. Samples of the water and the drinkers in different locations were microbiologically cultivated and examined. After new drinking equipment had been installed for one month, three months and five years, biofilm formation was detectable, and retrograde growth from the nipple drinkers was seen up to the connection with the main water distribution system. In particular, Enterobacteriaceae and Pseudomonas spp. were found in all samplings of the nipple drinkers. Zoonotic pathogens, Salmonella, pathogenic Yersinia enterocolitica and methicillin-resistant Staphylococcus aureus, were also isolated from the nipple drinkers, while Listeria monocytogenes was not detected via microbial cultivation methods in any of the samples. Since the pigs take the contaminated nipple drinkers into their mouths to drink, or drink contaminated water containing the pathogens, transmission and even infection of the pigs in the lairage can be assumed. This could consequently lead to contamination or cross-contamination of the meat during slaughter and processing and to a public health risk.

The composition of planktonic prokaryotic communities in a hospital building water system depends on both incoming water and flow dynamics

In recent years, the frequency of nosocomial infections has increased. Hospital water systems support the growth of microbes, especially opportunistic premise plumbing pathogens. In this study, planktonic prokaryotic communities present in water samples taken from hospital showers and hand basins, collected over three different sampling phases, were characterized by 16S rRNA gene amplicon sequencing. Significant differences in the abundance of various prokaryotic taxa were found through univariate and multivariate analysis. Overall, the prokaryotic communities of hospital water were taxonomically diverse and dominated by biofilm forming, corrosion causing, and potentially pathogenic bacteria. The phyla Proteobacteria, Actinobacteriota, Bacteroidota, Planctomycetota, Firmicutes, and Cyanobacteria made up 96% of the relative abundance. The α-diversity measurements of prokaryotic communities showed no difference in taxa evenness and richness based on sampling sites (shower or hand basins), sampling phases (months), and presence or absence of Vermamoeba vermiformis. However, β-diversity measurements showed significant clustering of prokaryotic communities based on sampling phases, with the greatest difference observed between the samples collected in phase 1 vs phase 2/3. Importantly, significant difference was observed in prokaryotic communities based on flow dynamics of the incoming water. The Pielou's evenness diversity index revealed a significant difference (Kruskal Wallis, p < 0.05) and showed higher species richness in low flow regime (< 13 minutes water flushing per week and ≤ 765 flushing events per six months). Similarly, Bray-Curtis dissimilarity index found significant differences (PERMANOVA, p < 0.05) in the prokaryotic communities of low vs medium/high flow regimes. Furthermore, linear discriminant analysis effect size showed that several biofilm forming (e.g., Pseudomonadales), corrosion causing (e.g., Desulfobacterales), extremely environmental stress resistant (e.g., Deinococcales), and potentially pathogenic (e.g., Pseudomonas) bacterial taxa were in higher amounts under low flow regime conditions. This study demonstrated that a hospital building water system consists of a complex microbiome that is shaped by incoming water quality and the building flow dynamics arising through usage.

Legionella relative abundance in shower hose biofilms is associated with specific microbiome members

Legionella are natural inhabitants of building plumbing biofilms, where interactions with other microorganisms influence their survival, proliferation, and death. Here, we investigated the associations of Legionella with bacterial and eukaryotic microbiomes in biofilm samples extracted from 85 shower hoses of a multiunit residential building. Legionella spp. relative abundance in the biofilms ranged between 0-7.8%, of which only 0-0.46% was L. pneumophila. Our data suggest that some microbiome members were associated with high (e.g. Chthonomonas, Vrihiamoeba) or low (e.g. Aquabacterium, Vannella) Legionella relative abundance. The correlations of the different Legionella variants (30 Zero-Radius OTUs detected) showed distinct patterns, suggesting separate ecological niches occupied by different Legionella species. This study provides insights into the ecology of Legionella with respect to: (i) the colonization of a high number of real shower hoses biofilm samples; (ii) the ecological meaning of associations between Legionella and co-occurring bacterial/eukaryotic organisms; (iii) critical points and future directions of microbial-interaction-based-ecological-investigations.

Sodium dichloroisocyanurate: improving broiler health by reducing harmful microbial levels in the waterline

Sodium dichloroisocyanurate (NaDCC) is commonly used for treating drinking water, industrial water, and wastewater. This study aimed to investigate the potential effects of NaDCC-treated waterline drinking water on the growth of AA+ broilers by reducing microbial levels in the waterline. A total of 480 healthy 1-day-old AA+ broilers (46.77 ± 0.50 g) were selected for the experiment and randomly divided into four groups with six replicates of 20 birds each. The control group received regular drinking water, while the test groups received drinking water with NaDCC concentrations of 10, 30, and 50 mg/L. The test groups consumed the treated water on specific days throughout the 42-day experimental period. Results showed that NaDCC treatment significantly reduced the levels of E. coli, Salmonella, S. aureus and Moulds in the drinking water at the waterline (p < 0.05). Drinking water with NaDCC also led to reduced broiler fecal emissions of NH3 and H2S, as well as reduced counts of E. coli, Salmonella, S. aureus and Moulds (p < 0.05), particularly at 30 mg/L and 50 mg/L concentrations. Broilers consuming NaDCC at 50 mg/L exhibited a significant increase in ADG from days 1-42 (p < 0.05). The levels of E. coli, Salmonella, S. aureus and Moulds in the drinking water at the waterline were significantly and positively correlated with the bacterial count in the feces (p < 0.05, R > 0.6). Additionally, bacterial levels in drinking water and broiler feces were negatively correlated with broiler production performance indicators, including ADG, ADFI, F/G and AWC. In conclusion, NaDCC can indirectly enhance broiler performance by reducing the levels of harmful bacteria in the waterline without affecting normal drinking water. The addition of 30 mg/L or 50 mg/L of NaDCC to the waterline in poultry production can effectively control harmful microorganisms and improve poultry health. Based on the experiment's results, it is recommended to preferentially use 30 mg/L NaDCC in the waterline to reduce farming costs.

Multichannel Microfluidic Platform for Temporal-Spatial Investigation of Niche Roles of Pseudomonas aeruginosa and Escherichia coli within a Dual-Species Biofilm

In natural or man-made environments, microorganisms exist predominantly as biofilms forming surface-associated bacterial communities embedded in extracellular polymeric substances (EPSs). Often, biofilm reactors used for endpoint and disruptive analyses of biofilm are not suitable for periodic observation of biofilm formation and development. In this study, a microfluidic device designed with multiple channels and a gradient generator was used for high-throughput analysis and real-time monitoring of dual-species biofilm formation and development. We compared the structural parameters of monospecies and dual-species biofilms containing Pseudomonas aeruginosa (expressing mCherry) and Escherichia coli (expressing green fluorescent protein [GFP]) to understand the interactions in the biofilm. The rate of biovolume increase of each species in monospecies biofilm (2.7 × 105 μm3) was higher than those in a dual-species biofilm (9.68 × 104 μm3); however, synergism was still observed in the dual-species biofilm due to overall increases in biovolume for both species. Synergism was also observed in a dual-species biofilm, where P. aeruginosa forms a "blanket" over E. coli, providing a physical barrier against shear stress in the environment. The microfluidic chip was useful for monitoring the dual-species biofilm in the microenvironment, indicating that different species in a multispecies biofilm exhibit different niches for the survival of the biofilm community. Finally, we demonstrated that the nucleic acids can be extracted from the dual-species biofilm in situ after biofilm imaging analysis. In addition, gene expression supported that the activation and suppression of different quorum sensing genes resulted in the different phenotype seen in the biofilm. This study showed that the integration of microfluidic device with microscopy analysis and molecular techniques could be a promising tool for studying biofilm structure and gene quantification and expression simultaneously. IMPORTANCE In natural or man-made environments, microorganisms exist predominantly as biofilms forming surface-associated bacterial communities embedded in extracellular polymeric substances (EPSs). Often, biofilm reactors used for endpoint and disruptive analyses of biofilm are not suitable for periodic observation of biofilm formation and development. Here, we demonstrate that a microfluidic device with multiple channels and a gradient generator can be useful for high-throughput analysis and real-time monitoring of dual-species biofilm formation and development. Our study revealed synergism in the dual-species biofilm, where P. aeruginosa forms a "blanket" over E. coli, providing a physical barrier against shear stress in the environment. Furthermore, different species in a multispecies biofilm exhibit different niches for the survival of the biofilm community. This study showed that the integration of microfluidic device with microscopy analysis and molecular techniques could be a promising tool for studying biofilm structure and gene quantification and expression simultaneously.

Antibacterial and Antibiofilm Activity of Chemically and Biologically Synthesized Silver Nanoparticles

Bacterial biofilms are a significant problem in the food industry, as they are difficult to eradicate and represent a threat to consumer health. Currently, nanoparticles as an alternative to traditional chemical disinfectants have garnered much attention due to their broad-spectrum antibacterial activity and low toxicity. In this study, silver nanoparticles (AgNPs) were synthesized by a biological method using a Jacaranda mimosifolia flower aqueous extract and by a chemical method, and the factors affecting both syntheses were optimized. The nanoparticles were characterized by Ultraviolet-visible (UV-Vis) spectrophotometry, Fourier-transform infrared spectroscopy (FTIR), Dynamic light scattering (DLS), X-ray diffraction (XRD), and Transmission electron microscopy (TEM) with a spherical and uniform shape. The antibacterial and antibiofilm formation activity was carried out on bacterial species of Pseudomonas aeruginosa and Staphylococcus aureus with the capacity to form biofilm. The minimum inhibitory concentration was 117.5 μg/mL for the chemical and 5.3 μg/mL for the biological nanoparticles. Both types of nanoparticles showed antibiofilm activity in the qualitative Congo red test and in the quantitative microplate test. Antibiofilm activity tests on fresh lettuce showed that biological nanoparticles decreased the population of S. aureus and P. aeruginosa by 0.63 and 2.38 logarithms, respectively, while chemical nanoparticles had little microbial reduction. In conclusion, the biologically synthesized nanoparticles showed greater antibiofilm activity. Therefore, these results suggest their potential application in the formulation of sanitizing products for the food and healthcare industries.

Service-lines as major contributor to water quality deterioration at customer ends

Biofilm detachment contributes to water quality deterioration. However, the contributions of biofilm detachment from different pipes have not been quantified or compared. Following the introduction of partial reverse osmosis (RO) in drinking water production, this study analyzed particles at customers' ends and tracked their origins to water distribution mains and service lines. For doing so, filter bags were installed in front of water meters to capture upstream detached particles, while biofilm from water main and service line were sampled by cutting pipe specimens. The results showed that elemental concentrations of the biofilm in mains were higher than those of service lines (54.3-268.5 vs. 27.1-44.4 μg/cm²), both dominated by Ca. Differently, filter bags were dominated by Fe/Mn (77.5-98.1%). After introducing RO, Ca significantly decreased in biofilms of mains but not service lines, but the released Fe/Mn rather than Ca arrived at customers' ends. The ATP concentrations of service lines were higher than mains, which decreased on mains but increased in service lines after introducing RO. For the core ASVs, 13/24 were shared by service lines (17), mains (21), and filter bags (17), which were assigned mainly to Nitrospira spp., Methylomagnum spp., Methylocytis spp., and IheB2-23 spp. According to source tracking results, service lines contributed more than mains to the particulate material collected by filter bags (57.6 ± 13.2% vs. 13.0 ± 11.6%). To the best of our knowledge, the present study provides the first evidence of service lines' direct and quantitative contributions to potential water quality deterioration at customers' ends. This highlights the need for the appropriate management of long-neglected service line pipes, e.g., regarding material selection, length optimization, and proper regulation.

Impact of parabens on drinking water bacteria and their biofilms: The role of exposure time and substrate materials

Parabens have been detected in drinking water (DW) worldwide, however, their impact on DW microbial communities remains to be explored. Microorganisms can easily adapt to environmental changes. Therefore, their exposure to contaminants of emerging concern, particularly parabens, in DW distribution systems (DWDS) may affect the microbiological quality and safety of the DW reaching the consumers tap. This work provides a pioneer evaluation of the effects of methylparaben (MP), propylparaben (PP), butylparaben (BP), and their combination (MIX), in bacterial biofilms formed on different surfaces, representative of DWDS materials - high-density polyethylene (HDPE), polypropylene (PPL) and polyvinyl chloride (PVC). Acinetobacter calcoaceticus and Stenotrophomonas maltophilia, isolated from DW, were used to form single and dual-species biofilms on the surface materials selected. The exposure to MP for 7 days caused the most significant effects on biofilms, by increasing their cellular culturability, density, and thickness up to 233%, 150%, and 224%, respectively, in comparison to non-exposed biofilms. Overall, more pronounced alterations were detected for single biofilms than for dual-species biofilms when HDPE and PPL, demonstrating that the surface material used affected the action of parabens on biofilms. Swimming motility and the production of virulence factors (protease and gelatinase) by S. maltophilia were increased up to 141%, 41%, and 73%, respectively, when exposed to MP for 7 days. The overall results highlight the potential of parabens to interfere with DW bacteria in planktonic state and biofilms, and compromise the DW microbiological quality and safety.

Biofilm-based technology for industrial wastewater treatment: current technology, applications and future perspectives

The microbial community in biofilm is safeguarded from the action of toxic chemicals, antimicrobial compounds, and harsh/stressful environmental circumstances. Therefore, biofilm-based technology has nowadays become a successful alternative for treating industrial wastewater as compared to suspended growth-based technologies. In biofilm reactors, microbial cells are attached to static or free-moving materials to form a biofilm which facilitates the process of liquid and solid separation in biofilm-mediated operations. This paper aims to review the state-of-the-art of recent research on bacterial biofilm in industrial wastewater treatment including biofilm fundamentals, possible applications and problems, and factors to regulate biofilm formation. We discussed in detail the treatment efficiencies of fluidized bed biofilm reactor (FBBR), trickling filter reactor (TFR), rotating biological contactor (RBC), membrane biofilm reactor (MBfR), and moving bed biofilm reactor (MBBR) for different types of industrial wastewater treatment. Besides, biofilms have many applications in food and agriculture, biofuel and bioenergy production, power generation, and plastic degradation. Furthermore, key factors for regulating biofilm formation were also emphasized. In conclusion, industrial applications make evident that biofilm-based treatment technology is impactful for pollutant removal. Future research to address and improve the limitations of biofilm-based technology in wastewater treatment is also discussed.

Land-Water Transport and Sources of Nitrogen Pollution Affecting the Structure and Function of Riverine Microbial Communities

The characterization of variations in riverine microbiota that stem from contaminant sources and transport modes is important for understanding biogeochemical processes. However, the association between complex anthropogenic nitrogen pollution and bacteria has not been extensively investigated owing to the difficulties faced while determining the distribution of nitrogen contaminants in watersheds. Here, we employed the Soil and Water Assessment Tool alongside microbiological analysis to explore microbial characteristics and their responses to complex nitrogen pollution patterns. Significant variations in microbial communities were observed in sub-basins with distinct land-water pollution transport modes. Point source-dominated areas (PSDAs) exhibited reduced microbial diversity, high number of denitrification groups, and increased nitrogen cycling compared with others. The negative relative deviations (-3.38) between the measured and simulated nitrate concentrations in PSDAs indicated that nitrate removal was more effective in PSDAs. Pollution sources were also closely associated with microbiota. Effluents from concentrated animal feeding operations were the primary factors relating to the microbiota compositions in PSDAs and balanced areas. In nonpoint source-dominated areas, contaminants from septic tanks become the most relevant sources to microbial community structures. Overall, this study expands our knowledge regarding microbial biogeochemistry in catchments and beyond by linking specific nitrogen pollution scenarios to microorganisms.

Nanogel-based coating as an alternative strategy for biofilm control in drinking water distribution systems

Biofilm formation and detachment in drinking water distribution systems (DWDS) can lead to several operational issues. Here, an alternative biofilm control strategy of limiting bacterial adhesion by application of a poly(N-isopropylmethacrylamide)-based nanogel coating on DWDS pipe walls was investigated. The nanogel coatings were successfully deposited on surfaces of four polymeric pipe materials commonly applied in DWDS construction. Nanogel-coated and non-coated pipe materials were characterized in terms of their surface hydrophilicity and roughness. Four DWDS relevant bacterial strains, representing Sphingomonas and Pseudomonas, were used to evaluate the anti-adhesive performance of the coating in 4 h adhesion and 24 h biofilm assays. The presence of the nanogel coating resulted in adhesion reduction up to 97%, and biofilm reduction up to 98%, compared to non-coated surfaces. These promising results motivate further investigation of nanogel coatings as a strategy for biofilm prevention in DWDS.

Guanidinium-Perfunctionalized Polyhedral Oligomeric Silsesquioxanes as Highly Potent Antimicrobials against Planktonic Microbes, Biofilms, and Coronavirus

Supramolecules have been drawing increasing attention recently in addressing healthcare challenges caused by infectious pathogens. We herein report a novel class of guanidinium-perfunctionalized polyhedral oligomeric silsesquioxane (Gua-POSS) supramolecules with highly potent antimicrobial activities. The modular structure of Gua-POSS Tm-Cn consists of an inorganic T10 or T8 core (m = 10 or 8), flexible linear linkers of varying lengths (n = 1 or 3), and peripherally aligned cationic guanidinium groups as the membrane-binding units. Such Gua-POSS supramolecules with spherically arrayed guanidinium cations display high antimicrobial potency against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria, as well as fungus (Candida albicans), with the best showing excellently low minimal inhibitory concentrations (MICs) of 1.7-6.8 μM in media, yet with negligible hemolytic activity and low in vitro cytotoxicity to mammalian cells. More significantly, they can inhibit biofilm formation at around their MICs and near-completely break down preestablished difficult-to-break biofilms at 250 μg mL^-1 (∼50 μM). Their strong antiviral efficacy was also experimentally demonstrated against the enveloped murine hepatitis coronavirus as a surrogate of the SARS-CoV species. Overall, this study provides a new design approach to novel classes of sphere-shaped organic-inorganic hybrid supramolecular materials, especially for potent antimicrobial, anti-biofilm, and antiviral applications.

Tap water as a natural vehicle for microorganisms shaping the human gut microbiome

Fresh potable water is an indispensable drink which humans consume daily in substantial amounts. Nonetheless, very little is known about the composition of the microbial community inhabiting drinking water or its impact on our gut microbiota. In the current study, an exhaustive shotgun metagenomics analysis of the tap water microbiome highlighted the occurrence of a highly genetic biodiversity of the microbial communities residing in fresh water and the existence of a conserved core tap water microbiota largely represented by novel microbial species, representing microbial dark matter. Furthermore, genome reconstruction of this microbial dark matter from water samples unveiled homologous sequences present in the faecal microbiome of humans from various geographical locations. Accordingly, investigation of the faecal microbiota content of a subject that daily consumed tap water for 3 years provides proof for horizontal transmission and colonization of water bacteria in the human gut.

Mechanism of Biofilm Formation on Installation Materials and Its Impact on the Quality of Tap Water

In the conducted study, an attempt was made to verify and evaluate the impact of the biofilm formed on the surfaces of the installation material on the quality and sanitary safety of tap water reaching the consumer. For biofilm studies, fractal analysis and quantitative bacteriological analysis were used. The quality of tap water flowing through the experimental installation (semi-technical scale) was determined using physicochemical and microbiological parameters. The quantitative analysis of the biofilm showed that an increase in the number of microorganisms was observed in the initial phase of biofilm formation (reached 1.4 × 104 CFU/mL/cm2 on day 14). During this period, there was a chaotic build-up of bacterial cells, as evidenced by an increase in the roughness of the profile lines. Unstable elevations of the biofilm formed in this way could be easily detached from the structure of the material, which resulted in deterioration of the bacteriological quality of the water leaving the installation. The obtained results indicate that the biofilm completely and permanently covered the surface of the tested material after 25 days of testing (the surface roughness described by the fractal dimension decreased). Moreover, the favorable temperature (22.6 °C) and the recorded decrease in the content of inorganic nitrogen (by 15%), phosphorus (by 14%), and dissolved oxygen (by 15%) confirm the activity of microorganisms. The favorable environmental conditions in the installation (the presence of nutrients, low chlorine concentration, and high temperature) contributed to the secondary development of microorganisms, including pathogenic organisms in the tested waters.

Hospital water as the source of healthcare-associated infection and antimicrobial-resistant organisms

PURPOSE OF REVIEW

Drinking water is considered one of the most overlooked and underestimated sources of healthcare-associated infections (HAIs). Recently, the prevention and control of opportunistic premise plumbing pathogens (OPPPs) in healthcare water systems has been receiving increasing attention in infection control guidelines. However, these fail to address colonization of pathogens that do not originate from source water. Subsequently, this review explores the role of water and premise plumbing biofilm in HAIs. The potential mechanisms of contamination and transmission of antimicrobial-resistant (AMR) pathogens originating both from supply water and human microbiota are discussed.

RECENT FINDINGS

OPPPs, such as Legionella pneumophila, Pseudomonas aeruginosa and Mycobacterium avium have been described as native to the plumbing environment. However, other pathogens, not found in the source water, have been found to proliferate in biofilms formed on outlets devices and cause HAI outbreaks.

SUMMARY

Biofilms formed on outlet devices, such as tap faucets, showers and drains provide an ideal niche for the dissemination of antimicrobial resistance. Thus, comprehensive surveillance guidelines are required to understand the role that drinking water and water-related devices play in the transmission of AMR HAIs and to improve infection control guidelines.

Pilot investigation on biostability of drinking water distribution systems under water source switching

Water quality deterioration of drinking water distribution systems (DWDSs) caused by water source switching has been reported previously. However, systematic investigation of the biostability of DWDS under water source switching is limited. Aged pipes, including three commonly used pipe materials dug out from a practical DWDS, were used to systematically investigate the biofilm stability mechanism of DWDS under water source switching to quality-improved water. An increase in adenosine triphosphate (ATP) concentration in the bulk water during the initial stage of the switching period was observed, indicating the risk of biofilm release through aged pipe surfaces after water source switching. Sloughing of biofilms might contribute to temporary instability. From day 35, the ATP concentration in the polyethylene (PE) and plastic stainless steel composite (PS) pipes were maintained at approximately 2.40 and 2.56 ng/L, respectively. In contrast, the ATP concentration in the ductile iron (DI) pipes was higher, at approximately 3.43 ng/L from day 42. The water quality variation could cause areas of the biofilm to slough and reduce the biomass of biofilm, causing partial alteration of the microbial community. 16S rRNA gene amplicon sequencing-based functional prediction revealed that the biofilm could increase the abundance of chlorine-resistant bacteria attributed to the increase in Pseudomonas and Methylobacterium after switching to quality-improved water. Moreover, the profiles of specific pathways linked to human diseases, antibiotic resistance, and antibiotic biosynthesis revealed that the safety of the biofilm could improve after switching to quality-improved water. KEY POINTS: • The PE and PS biofilm showed improved resistance to water quality perturbation. • Greater number of Methylobacterium was found in the biofilm after water source switching. • 3.16S gene-based metagenomics prediction revealed that the safety of the biofilm under water source switching.

Capturing and tracing the spatiotemporal variations of planktonic and particle-associated bacteria in an unchlorinated drinking water distribution system

The aperiodic changes in the quantity and community of planktonic and particle-associated bacteria have hampered the understanding and management of microbiological water quality in drinking water distribution systems. In this study, online sampling was combined with the microbial fingerprint-based SourceTracker2 to capture and trace the spatiotemporal variations in planktonic and particle-associated bacteria in an unchlorinated distribution system. The results showed that spatially, the particle load significantly increased, while in contrast, the quantity of particle-associated bacteria decreased sharply from the treatment plant to the distribution network. Similar to the trend of particle-associated bacterial diversity, the number of observed OTUs first slightly decreased from the treatment plant to the transportation network and then sharply increased from the transportation network to the distribution network. The SourceTracker2 results revealed that the contribution of particle-associated bacteria from the treatment plant decreased along the distribution distance. The spatial results indicate the dominant role of sedimentation of particles from the treatment plant, while the observed increases in particles and the associated bacteria mainly originated from the distribution network, which were confirmed directly by the increased contributions of loose deposits and biofilm. Temporally, the daily peaks of particle-associated bacterial quantity, observed OTU number, and contributions of loose deposits and biofilms were captured during water demand peaks (e.g., 18-21 h). The temporal results reveal clear linkages between the distribution system harboring bacteria (e.g., within loose deposits and biofilms) and the planktonic and particle-associated bacteria flowing through the distribution system, which are dynamically connected and interact. This study highlights that the spatiotemporal variations in planktonic and particle-associated bacteria are valuable and unneglectable for the widely on-going sampling campaigns required by water quality regulations and/or drinking water microbiological studies.

It’s a Long Way to the Tap: Microbiome and DNA-Based Omics at the Core of Drinking Water Quality

Microbial communities interact with us and affect our health in ways that are only beginning to be understood. Microorganisms have been detected in every ecosystem on Earth, as well as in any built environment that has been investigated. Drinking water sources, drinking water treatment plants and distribution systems provide peculiar microbial ecological niches, dismantling the belief of the “biological simplicity” of drinking water. Nevertheless, drinking water microbiomes are understudied compared to other microbiomes. Recent DNA sequencing and meta-omics advancements allow a deeper understanding of drinking water microbiota. Thus, moving beyond the limits of day-to-day testing for specific pathogenic microbes, new approaches aim at predicting microbiome changes driven by disturbances at the macro-scale and overtime. This will foster an effective and proactive management of water sources, improving the drinking water supply system and the monitoring activities to lower public health risk. Here, we want to give a new angle on drinking water microbiome research. Starting from a selection of 231 scientific publications on this topic, we emphasize the value of biodiversity in drinking water ecosystems and how it can be related with industrialization. We then discuss how microbiome research can support sustainable drinking water management, encouraging collaborations across sectors and involving the society through responsible research and innovation.

Nanotechnologies for control of pathogenic microbial biofilms

Biofilms are formed at interfaces by microorganisms, which congregate in microstructured communities embedded in a self-produced extracellular polymeric substance (EPS). Biofilm-related infections are problematic due to the high resistance towards most clinically used antimicrobials, which is associated with high mortality and morbidity, combined with increased hospital stays and overall treatment costs. Several new nanotechnology-based approaches have recently been proposed for targeting resistant bacteria and microbial biofilms. Here we discuss the impacts of biofilms on healthcare, food processing and packaging, and water filtration and distribution systems, and summarize the emerging nanotechnological strategies that are being developed for biofilm prevention, control and eradication. Combination of novel nanomaterials with conventional antimicrobial therapies has shown great potential in producing more effective platforms for controlling biofilms. Recent developments include antimicrobial nanocarriers with enzyme surface functionality that allow passive infection site targeting, degradation of the EPS and delivery of high concentrations of antimicrobials to the residing cells. Several stimuli-responsive antimicrobial formulation strategies have taken advantage of the biofilm microenvironment to enhance interaction and passive delivery into the biofilm sites. Nanoparticles of ultralow size have also been recently employed in formulations to improve the EPS penetration, enhance the carrier efficiency, and improve the cell wall permeability to antimicrobials. We also discuss antimicrobial metal and metal oxide nanoparticle formulations which provide additional mechanical factors through externally induced actuation and generate reactive oxygen species (ROS) within the biofilms. The review helps to bridge microbiology with materials science and nanotechnology, enabling a more comprehensive interdisciplinary approach towards the development of novel antimicrobial treatments and biofilm control strategies.

Influence of Temperature on Biofilm Formation Mechanisms Using a Gravity-Driven Membrane (GDM) System: Insights from Microbial Community Structures and Metabolomics

A biofilm has a significant effect on water treatment processes. Currently, there is a lack of knowledge about the effect of temperature on the biofilm structure in water treatment processes. In this study, a gravity-driven membrane ultrafiltration system was operated with river feedwater at two temperatures ("low", 4 °C; "high", 25 °C) to explore the biofilm structure and transformation mechanism. The results showed that the difference in dissolved oxygen concentration might be one of the main factors regulating the structural components of the biofilm. A denser biofilm formation and reduced flux were observed at the lower temperature. The linoleic acid metabolism was significantly inhibited at low temperature, resulting in enhanced pyrimidine metabolism by Na⁺ accumulation. In addition, the biofilm at low temperature had a higher proportion of the metabolites of lipids and lipid-like molecules (11.25%), organic acids and derivatives (10.83%), nucleosides, nucleotides, and analogues (7.083%), and organoheterocyclic compounds (6.66%). These small molecules secrete more polysaccharides having C═O and O═C-O functional groups, which intensified the resistance of the biofilm. Furthermore, the upregulation pathway of pyrimidine metabolism also increased the risk of urea accumulation at low temperature. Limnohabitans, Deinococcus, Diaphorobacter, Flavobacterium, and Pseudomonas were identified as the principal microorganisms involved in this metabolic transformation.

Dietary Supplementation of Fructooligosaccharides Enhanced Antioxidant Activity and Cellular Immune Response in Broiler Chickens

This study investigated the impact of various concentrations of fructooligosaccharides (FOS) prebiotic on the production performance, antioxidant status, and immune response of broiler chicken. The FOS was used at 0, 0.3, 0.5, and 0.7%. The cycle included 340 broilers distributed into 4 batteries, with 85 broiler chickens in each battery. There were 5 replicates with 17 broiler chickens each, and the analyses were triplicated. The studied parameters were production performance, antioxidant status, hematological measurements, cellular and humoral immune response, intestinal acidosis, intestinal microbial counts, and volatile fatty acid (VFA) level in the hindgut. Results showed that broiler chickens fed 0.7% of FOS had significantly higher body weight gain than the control group and the groups fed 0.3% and 0.5% of FOS. Supplementing broiler feed with FOS at all levels increased the total antioxidant capacity (TAC) and reduced the malondialdehyde of the sera (P = 0.015 and 0.025, respectively). Liver catalase enzyme in the broiler chickens fed 0.5 and 0.7% of FOS was higher than that of the control group and the group fed 0.3% of FOS (P = 0.001). However, the liver MDA of the control group was higher than that of all the other groups (P = 0.031). The total WBC and heterophils % were the highest after supplementing broilers with 0.7% FOS (P = 0.004 and 0.003, respectively) at 3 wks of age. Conversely, lymphocytes and monocytes were the lowest for the 0.7% FOS group (P = 0.030 and 0.020, respectively). Dietary 0.05 and 0.7% of FOS induced the highest cellular response compared to the other treatments (P = 0.020). Thymus, bursa of Fabricious, and spleen weights were enhanced after FOS supplementation, which indicates a higher specific cellular response. To conclude, FOS prebiotic at all levels can be utilized safely to enhance the antioxidant activity and the cellular immune response of broiler chickens. Using 0.7% of FOS resulted in higher body weight of broilers. Accordingly, this amount of FOS is sufficient to reach the required results.

Innovative Bacterial Removal Technique Using Green Synthetic Nano Curcumin Zinc (II) Complex for Sustainable Water Resource Management

Sustainable management of water resources is a daunting challenge, especially with respect to microbes. This study primarily focused on the development of a novel application for the removal of specific bacterial groups in different water types using a green synthetic nano Cur-Zn(II) complex. The results of UV and FT-IR spectroscopic techniques suggested the formation of a chelation complex. Proton NMR showed that the main enolic proton peak with a chemical shift of 16.45 nm identified in curcumin was missed, indicating the contribution of carbonyl oxygen of enol in the formation of the complex. The crystalline nature of the complex and Wurtzite structure of annealed products was inferred from the XRD analysis data. SEM results confirmed the complex’s morphology as spherical and clustered with a rough surface, having an average particle size of 68.2 nm. In addition, the complex was observed to be stable up to 300 °C without any decomposition from STA. Being acidic in nature with a pH of 5.36, the complex penetrates into the cell membrane and inhibit microbial growth. Intrinsically, no studies have been reported for the removal of microbes from water using natural materials embedded with inorganic metals, particularly in nano form. Therefore, the study is the first, innovative, eco-friendly, and economical method to use nano Cur-Zn(II) for removing targeted bacteria in real water samples with 100% efficiency by using optimized amounts (0.025–0.2 g/L) of the complex at a contact time interval between 4 and 24 h. The complex developed is toxic-free and can be applied in situ.

Microbiomes in drinking water treatment and distribution: A meta-analysis from source to tap

A meta-analysis of existing and available Illumina 16S rRNA datasets from drinking water source, treatment and drinking water distribution systems (DWDS) were collated to compare changes in abundance and diversity throughout. Samples from bulk water and biofilm were used to assess principles governing microbial community assembly and the value of amplicon sequencing to water utilities. Individual phyla relationships were explored to identify competitive or synergistic factors governing DWDS microbiomes. The relative importance of stochasticity in the assembly of the DWDS microbiome was considered to identify the significance of source and treatment in determining communities in DWDS. Treatment of water significantly reduces overall species abundance and richness, with chlorination of water providing the most impact to individual taxa relationships. The assembly of microbial communities in the bulk water of the source, primary treatment process and DWDS is governed by more stochastic processes, as is the DWDS biofilm. DWDS biofilm is significantly different from bulk water in terms of local contribution to beta diversity, type and abundance of taxa present. Water immediately post chlorination has a more deterministic microbial assembly, highlighting the significance of this process in changing the microbiome, although elevated levels of stochasticity in DWDS samples suggest that this may not be the case at customer taps. 16S rRNA sequencing is becoming more routine, and may have several uses for water utilities, including: detection and risk assessment of potential pathogens such as those within the genera of Legionella and Mycobacterium; assessing the risk of nitrification in DWDS; providing improved indicators of process performance and monitoring for significant changes in the microbial community to detect contamination. Combining this with quantitative methods like flow cytometry will allow a greater depth of understanding of the DWDS microbiome.

Online evaluation of bacterial cells in sand filter effluents during full-scale treatment of drinking water

Ensuring the microbiological safety of drinking water is critical to protect public health. This study aimed to evaluate the reliability of real-time bacteriological counter coupled with an online dialysis membrane-based pre-treatment system for continuously monitoring bacterial cell counts in sand filter effluents of a full-scale drinking water treatment plant. The pre-treatment system, which included anion exchange resins (porous polymeric microbeads that trap ions for releasing other ions) for dialysate regeneration, successfully achieved the stable attenuation of background interfering substances (humic acids) during the 19-d test. The real-time bacteriological counter equipped with the pre-treatment system provided a continuous profile of bacterial cell counts in the sand filter effluent (0.2-2.5 × 10⁴ counts/mL). The online analysis identified different timing of concentration peaks between particle and bacterial cell counts after backwashing. Bacterial community analysis revealed that Proteobacteria, Planctomycetes, and Cyanobacteria were the dominating phyla. Further, total bacterial cell counts determined by fluorescence microscopy and SYBR® Green I staining, a commonly accepted parameter, was found to be an indicator of online-monitored bacterial cell counts. The results indicated the potential of monitoring the bacterial cell counts in a sand filter process for providing an early warning of filter failures, which can allow plant operators to diagnose the overall system and provide countermeasures.

Antibiotic Resistance in the Drinking Water: Old and New Strategies to Remove Antibiotics, Resistant Bacteria, and Resistance Genes

Bacterial resistance is a naturally occurring process. However, bacterial antibiotic resistance has emerged as a major public health problem in recent years. The accumulation of antibiotics in the environment, including in wastewaters and drinking water, has contributed to the development of antibiotic resistant bacteria and the dissemination of antibiotic resistance genes (ARGs). Such can be justified by the growing consumption of antibiotics and their inadequate elimination. The conventional water treatments are ineffective in promoting the complete elimination of antibiotics and bacteria, mainly in removing ARGs. Therefore, ARGs can be horizontally transferred to other microorganisms within the aquatic environment, thus promoting the dissemination of antibiotic resistance. In this review, we discuss the efficiency of conventional water treatment processes in removing agents that can spread/stimulate the development of antibiotic resistance and the promising strategies for water remediation, mainly those based on nanotechnology and microalgae. Despite the potential of some of these approaches, the elimination of ARGs remains a challenge that requires further research. Moreover, the development of new processes must avoid the release of new contaminants for the environment, such as the chemicals resulting from nanomaterials synthesis, and consider the utilization of green and eco-friendly alternatives such as biogenic nanomaterials and microalgae-based technologies.

Immobilized arginine/tryptophan-rich cyclic dodecapeptide on reduced graphene oxide anchored with manganese dioxide for microbial biofilm eradication

To avoid the accumulation of bacterial biofilms in water pipelines, it is critical to develop potent antimicrobial agents with good ability to reduce extracellular polymeric substances (EPS). In this study, cyclic dodecapeptides were synthesized, and different mutations for increasing the ratio of arginine (Arg) and tryptophan (Trp) were introduced. Separately, the synthesized dodecapeptides were immobilized on a reduced graphene oxide nanocomposite anchored with a hierarchical β-MnO₂ (RGO/β-MnO₂) hybrid. With a minimum inhibitory concentration of 0.97 g/mL, the immobilized Arg-Trp rich antimicrobial peptides (AMP) on RGO/MnO₂ nanocomposite, Cdp-4/RGO/MnO₂, showed superior efficacy against multidrug-resistant Pseudomonas aeruginosa ATCC 15692 (P. aeruginosa) planktonic cells. The immobilized Cdp-4/RGO/β-MnO₂ also eradicated the mature biofilm by 99% with a minimum inhibitory concentration value of 62.5 µg/mL with significant reduction of EPS. These characteristics allow the use of the immobilized Arg-Trp rich AMP as a promising antimicrobial agent against microbial biofilms, present in water distribution systems.

Chlorinated cyanurates and potassium salt of peroxymonosulphate as antimicrobial and antibiofilm agents for drinking water disinfection

The understanding of microbial susceptibility to disinfectants is an important step to provide drinking water (DW) of adequate microbiological quality. In drinking water distribution systems (DWDS) the application of disinfectants is the main approach to control microorganisms. Although chlorine has been commonly used for DW treatment, the increase of microbial resistance and the production of harmful disinfection by-products promote the necessity to seek new alternatives. This study evaluated the antimicrobial activity of sodium dichloroisocyanurate (NaDCC), trichloroisocyanuric acid (TCCA), and pentapotassium bis(peroxymonosulphate) bis(sulphate) (OXONE) against two emerging pathogens isolated from DW, Acinetobacter calcoaceticus and Stenotrophomonas maltophilia. Free chlorine from calcium hypochlorite was used for comparison. The dose and time-responses against planktonic bacteria were performed as well as the assessment of the effects on membrane integrity. Moreover, the effects against 48 h-old biofilms formed on polyvinyl chloride and stainless steel were evaluated in terms of biofilm culturability and removal. Minimum bactericidal concentrations of 2.1 and 3.1 mg/L for NaDCC, 2.5 and 3.8 mg/L for TCCA, 340 and 690 mg/L for OXONE, and 0.80 and 1.0 mg/L for free chlorine alone were obtained against S. maltophilia and A. calcoaceticus, respectively. The kinetic modeling revealed that NaDCC and TCCA caused similar inactivation rates and the time for first log reduction by OXONE was less than 10 min, for both bacteria. All the disinfectants triggered significant bacterial cytoplasmic membrane destabilization, even at sub-lethal concentrations. A 30 min treatment with the disinfectants allowed a reduction in the biofilm culturability up to 5 log. OXONE was the disinfectant with the best efficiency against both bacterial biofilms. However, none of the disinfectants caused significant biofilm removal (reduction < 1 log cells/cm²). This study highlights NaDCC, TCCA, and OXONE as promising alternatives to free chlorine for DW disinfection, particularly for planktonic growth control and biofilm culturability reduction.

Biofilms in Water Hoses of a Meat Processing Environment Harbor Complex Microbial Communities

Safe and hygienic water distribution is essential for maintaining product quality and safety. It is known that biofilms alter the appearance and microbial quality of water along the distribution chain. Yet, biofilms in water hoses throughout the food processing environment have not been investigated in detail. Here, microbial communities from water hoses and other environmental sites in contact with water, in addition to the source water itself, were studied in the meat processing environment. Biofilms were present in all water hoses as determined by the presence of bacterial DNA and biofilm matrix components (carbohydrates, extracellular DNA, and proteins). The microbial community of the biofilms was dominated by Proteobacteria, represented mainly by Comamonadaceae and Pseudoxanthomonas. Moreover, genera that are associated with an intracellular lifestyle (e.g., Neochlamydia and Legionella) were present. Overall, the microbial community of biofilms was less diverse than the water microbial community, while those from the different sample sites were distinct from each other. Indeed, only a few phyla were shared between the water hose biofilm and the source water or associated environmental samples. This study provides first insights towards understanding the microbiota of water hose biofilms in the food processing environment.

Impact of pipe material and chlorination on the biofilm structure and microbial communities

Pipe material and residual chlorine are key factors for the drinking water distribution system, and understanding the biofilm ecosystem is vital for water quality safeguard. The aim of our study was to determine the influence of pipe materials (ductile iron, steel, polyethylene) and chlorination on the biofilm structure and microbial community, as shown by the physicochemical properties, extracellular polymeric substances (EPS) structural characteristics, bacterial community composition, and functional traits. EPS spatial properties were studied based on a semi-quantitative confocal laser scanning microscope (CLSM) description. Regarding the impact of chlorination, residule chlorine (1.0 ± 0.3 mg L^-1 free chlorine) could inhibit the bacteria colonization, and initiate a potential response to external disinfectants revealed by the EPS spatial distribution changes and communities variation compared to unchlorinated system. Regarding the impact of pipe material, polyethylene (PE) biofilms displayed lower biomass, loose zoogloea structure, lower proteins and polysaccharides content, and poor microbial diversity in contrast to ductile iron and steel biofilms. Pipe material was the more possible driving factor of the biofilm community composition compared to the chlorination based on principal coordinates analysis (PCoA) and permutational multivariate analysis of variance (PERMANOVA). Actinobacteria was dominant in the PE biofilms (45.57%-83.32%), while Alphaproteobacteria (34.30%-73.22%) and Gammaproteobacteria (6.46%-36.82%) were the major classes in the steel and ductile iron biofilms. The genus Rhodococcus was predominant in the PE biofilms. Rhodococcus, Pseudomonas, and Sphingomonas seemed to have a better growth advantage in the chlorinated system and display a stronger disinfectant resistance. Functional sketch prediction indicated the potential impact of pipe material and chlorination on functional pathway abundnce, possible functional pathways associated with infectious disease included. This study provides insights into the impact of pipe material and chlorination on biofilm structure and microbial community and might help to develop monitoring or maintenance strategies to protect the biosafety of the drinking water.

Antimicrobial, Antibiofilm, and Antioxidant Activity of Functional Poly(Butylene Succinate) Films Modified with Curcumin and Carvacrol

The use of food industry waste as bioactive compounds in the modification of biodegradable films as food packaging remains a major challenge. This study describes the preparation and bioactivity characterization of poly(butylene succinate) (PBS)-based films with the addition of the bioactive compounds curcumin (CUR) and carvacrol (CAR). Films based on PBS modified with curcumin and carvacrol at different concentration variations (0%/0.1%/1%) were prepared by solvent casting method. The antioxidant, antimicrobial, and antibiofilm properties were investigated against bacteria (Escherichia coli, Staphylococcus aureus) and fungi (Candida albicans). As a result of the modification, the films exhibited free radicals scavenging (DPPH up to 91.47% and ABTS up to 99.21%), as well as antimicrobial (6 log, 4 log, and 2 log reductions for E. coli, S. aureus, and C. albicans, respectively, for samples modified with 1% CUR and 1% CAR) activity. Moreover, antibiofilm activity of modified materials was observed (8.22-87.91% reduction of biofilm, depending on bioactive compounds concentration). PBS films modified with curcumin and carvacrol with observed bifunctional properties have many potential applications as active packaging.

Three faces of biofilms: a microbial lifestyle, a nascent multicellular organism, and an incubator for diversity

Biofilms are organised heterogeneous assemblages of microbial cells that are encased within a self-produced matrix. Current estimates suggest that up to 80% of bacterial and archaeal cells reside in biofilms. Since biofilms are the main mode of microbial life, understanding their biology and functions is critical, especially as controlling biofilm growth is essential in industrial, infrastructure and medical contexts. Here we discuss biofilms both as collections of individual cells, and as multicellular biological individuals, and introduce the concept of biofilms as unique incubators of diversity for the microbial world.

Mapping the Terrain for Pathogen Persistence and Proliferation in Non-potable Reuse Distribution Systems: Interactive Effects of Biofiltration, Disinfection, and Water Age

Diverse pathogens can potentially persist and proliferate in reclaimed water distribution systems (RWDSs). The goal of this study was to evaluate interactive effects of reclaimed water treatments and water age on persistence and proliferation of multiple fecal (e.g., Klebsiella, Enterobacter) and non-fecal (e.g., Legionella, mycobacteria) gene markers in RWDSs. Six laboratory-scale RWDSs were operated in parallel receiving the influent with or without biologically active carbon (BAC) filtration + chlorination, chloramination, or no disinfectant residual. After 3 years of operation, the RWDSs were subject to sacrificial sampling and shotgun metagenomic sequencing. We developed an in-house metagenome-derived pathogen quantification pipeline, validated by quantitative polymerase chain reaction and mock community analysis, to estimate changes in abundance of ∼30 genera containing waterborne pathogens. Microbial community composition in the RWDS bulk water, biofilm, and sediments was clearly shaped by BAC filtration, disinfectant conditions, and water age. Key commonalities were noted in the ecological niches occupied by fecal pathogen markers in the RWDSs, while non-fecal pathogen markers were more varied in their distribution. BAC-filtration + chlorine was found to most effectively control the widest range of target genera. However, filtration alone or chlorine secondary disinfection alone resulted in proliferation of some of these genera containing waterborne pathogens.

Biofilm viscoelasticity and nutrient source location control biofilm growth rate, migration rate, and morphology in shear flow

We present a numerical model to simulate the growth and deformation of a viscoelastic biofilm in shear flow under different nutrient conditions. The mechanical interaction between the biofilm and the fluid is computed using the Immersed Boundary Method with viscoelastic parameters determined a priori from measurements reported in the literature. Biofilm growth occurs at the biofilm-fluid interface by a stochastic rule that depends on the local nutrient concentration. We compare the growth, migration, and morphology of viscoelastic biofilms with a common relaxation time of 18 min over the range of elastic moduli 10-1000 Pa in different nearby nutrient source configurations. Simulations with shear flow and an upstream or a downstream nutrient source indicate that soft biofilms grow more if nutrients are downstream and stiff biofilms grow more if nutrients are upstream. Also, soft biofilms migrate faster than stiff biofilms toward a downstream nutrient source, and although stiff biofilms migrate toward an upstream nutrient source, soft biofilms do not. Simulations without nutrients show that on the time scale of several hours, soft biofilms develop irregular structures at the biofilm-fluid interface, but stiff biofilms deform little. Our results agree with the biophysical principle that biofilms can adapt to their mechanical and chemical environment by modulating their viscoelastic properties. We also compare the behavior of a purely elastic biofilm to a viscoelastic biofilm with the same elastic modulus of 50 Pa. We find that the elastic biofilm underestimates growth rates and downstream migration rates if the nutrient source is downstream, and it overestimates growth rates and upstream migration rates if the nutrient source is upstream. Future modeling can use our comparison to identify errors that can occur by simulating biofilms as purely elastic structures.

From individual response to population ecology: Environmental factors restricting survival of vegetative bacteria at solid-air interfaces

Combating microbial survival on dry surfaces contributes to improving public health in indoor environments (clinical and industrial settings) and extends to the natural environment. For vegetative bacteria at solid-air interfaces, lack of water impacts cellular response, and acclimation depends on community support in response to ecological processes. Gaining insights about important ecological processes leading to inhibition of microbial survival under extreme conditions, such as vicinity of highly radioactive nuclear waste, is key for improving engineering designs. Canada plans to store used nuclear fuel and radioactive waste in a deep geological repository (DGR) with a multiple-barrier system constructed at an approximate depth of 500 m. Microorganisms in highly compacted bentonite surrounding used fuel containers will be challenged by high pressure, temperature, and radiation, as well as limited water and nutrients. Thus, it is difficult to estimate microbial activities, given that the prime concern for a microbial community is survival, and energy expenditure is regulated. To enable preventive measures and for risk evaluation, a deeper understanding of community-based survival strategies of bacterial cells exposed to air (gaseous phase) during prolonged periods of desiccation is required. An in-depth review of collective studies that assess microbial survival and persistence during desiccation is presented here to augment and direct our prior knowledge about tactics used by bacteria for survival at interfaces in hostile natural environments including and similar to a DGR.

Effects of the Quinone Oxidoreductase WrbA on Escherichia coli Biofilm Formation and Oxidative Stress

The effects of natural compounds on biofilm formation have been extensively studied, with the goal of identifying biofilm formation antagonists at sub-lethal concentrations. Salicylic and cinnamic acids are some examples of these compounds that interact with the quinone oxidoreductase WrbA, a potential biofilm modulator and an antibiofilm compound biomarker. However, WrbA’s role in biofilm development is still poorly understood. To investigate the key roles of WrbA in biofilm maturation and oxidative stress, Escherichia coli wild-type and ∆wrbA mutant strains were used. Furthermore, we reported the functional validation of WrbA as a molecular target of salicylic and cinnamic acids. The lack of WrbA did not impair planktonic growth, but rather affected the biofilm formation through a mechanism that depends on reactive oxygen species (ROS). The loss of WrbA function resulted in an ROS-sensitive phenotype that showed reductions in biofilm-dwelling cells, biofilm thickness, matrix polysaccharide content, and H₂O₂ tolerance. Endogenous oxidative events in the mutant strain generated a stressful condition to which the bacterium responded by increasing the catalase activity to compensate for the lack of WrbA. Cinnamic and salicylic acids inhibited the quinone oxidoreductase activity of purified recombinant WrbA. The effects of these antibiofilm molecules on WrbA function was proven for the first time.

Bacterial dynamics in drinking water distribution systems and flow cytometry monitoring scheme optimization

Water biostability is desired within drinking water distribution systems (DWDSs) to limit microbiologically-related operational, aesthetic and, eventually, health-related issues. However, variations in microbiological quality can take place both spatially along DWDS pipelines and temporally at single locations due to biofilm detachment, water quality seasonality and other processes. In this study, long- and short-term trends of bacterial concentration and community structure were investigated in a secondary branch of an unchlorinated DWDS for several months using high-frequency flow cytometry (FCM) and traditional laboratory monitoring campaigns. Long-term trends of bacterial concentrations and community structures were likely caused by changes in the water physical-chemical quality (i.e. pH and conductivity). Short-term daily pattern, instead, resulted in significant variations between the bacterial concentrations and community structures at different hours, likely due to biofilm detachment and loose deposits resuspension related to changes in the local water flow. These patterns, however, showed broad variations and did not persist during the entire monitoring campaign presumably due to the stochasticity of local instantaneous demand and seasonal changes in water consumption. During periods without sensible long-term trends, the sampling hours explain a comparable or larger fraction of the bacterial community diversity compared to dates. The variations observed with FCM were poorly or not detected by traditional laboratory analyses, as the correlation between the two were rather weak, highlighting the limited information provided by traditional approaches. On the other hand, FCM data correlated with water pH and conductivity, underlining the relation between physical-chemical and microbiological water quality. Such results suggest that the advanced control of the physical-chemical water quality could minimize the microbiological water quality variations. Moreover, monitoring campaign planning should take into account the sampling time to reduce the noise caused by daily fluctuations and/or assess the overall quality variations. Finally, as monitoring costs are one of the barriers which prevent a more widespread use of FCM, a monitoring scheme optimization strategy was developed. Such strategy employs the data from an initial high-frequency sampling period to select the sampling hours which maximize the observed variations of bacterial concentration and community composition.

Identification of Microorganisms from Several Surfaces by MALDI-TOF MS: P. aeruginosa Is Leading in Biofilm Formation

New ecological trends and changes in consumer behavior are known to favor biofilm formation in household appliances, increasing the need for new antimicrobial materials and surfaces. Their development requires laboratory-cultivated biofilms, or biofilm model systems (BMS), which allow for accelerated growth and offer better understanding of the underlying formation mechanisms. Here, we identified bacterial strains in wildtype biofilms from a variety of materials from domestic appliances using matrix-assisted laser desorption/ionization-time of flight mass spectroscopy (MALDI-TOF-MS). Staphylococci and pseudomonads were identified by MALDI-TOF-MS as the main genera in the habitats and were analyzed for biofilm formation using various in vitro methods. Standard quantitative biofilm assays were combined with scanning electron microscopy (SEM) to characterize biofilm formation. While Pseudomonas putida, a published lead germ, was not identified in any of the collected samples, Pseudomonas aeruginosa was found to be the most dominant biofilm producer. Water-born Pseudomonads were dominantly found in compartments with water contact only, such as in detergent compartment and detergent enemata. Furthermore, materials in contact with the washing load are predominantly colonized with bacteria from the human.

Influence of pipe material on biofilm microbial communities found in drinking water supply system

The biofilms and water samples from a model installation built of PVC-U, PE-HD and cast iron pipes were investigated using standard heterotrophic plate count and 16S rRNA Next Generation Sequencing. The results of the high throughput identification imply that the construction material strongly influences the microbiome composition. PVC-U and PE-HD pipes were dominated with Proteobacteria (54-60%) while the cast pipe was overgrown by Nitrospirae (64%). It was deduced that the plastic pipes create a more convenient environment for the potentially pathogenic taxa than the cast iron. The 7-year old biofilms were described as complex habitats with sharp oxidation-reduction gradients, where co-existence of methanogenic and methanotrophic microbiota takes place. Furthermore, it was found that the drinking water distribution systems (DWDS) are a useful tool for studying the ecology of rare bacterial phyla. New ecophysiological aspects were described for Aquihabitans, Thermogutta and Vampirovibrio. The discrepancy between identity of HPC-derived bacteria and NGS-revealed composition of biofilm and water microbiomes point to the need of introducing new diagnostical protocols to enable proper assessment of the drinking water safety, especially in DWDSs operating without disinfection.

The Bacterial Community Diversity of Bathroom Hot Tap Water Was Significantly Lower Than That of Cold Tap and Shower Water

Microbial drinking water quality in premise plumbing systems (PPSs) strongly affects public health. Bacterial community structure is the essential aspect of microbial water quality. Studies have elucidated the microbial community structure in cold tap water, while the microbial community structures in hot tap and shower water are poorly understood. We sampled cold tap, hot tap, and shower water from a simulated PPS monthly for 16 consecutive months and assessed the bacterial community structures in those samples via high-throughput sequencing of bacterial 16S rRNA genes. The total relative abundance of the top five most abundant phyla (Proteobacteria, Actinobacteria, Bacteroidetes, Cyanobacteria, and Firmicutes) was greater than 90% among the 24 identified phyla. The most abundant families were Burkholderiaceae, Sphingomonadaceae, unclassified Alphaproteobacteria, unclassified Corynebacteriales, and Mycobacteriaceae. A multiple linear regression suggests that the bacterial community diversity increased with water temperature and the age of the simulated PPS, decreased with total chlorine residual concentration, and had a limited seasonal variation. The bacterial community in hot tap water had significantly lower Shannon and Inverse Simpson diversity indices (p < 0.05) and thus a much lower diversity than those in cold tap and shower water. The paradoxical results (i.e., diversity increased with water temperature, but hot tap water bacterial community was less diverse) were presumably because (1) other environmental factors made hot tap water bacterial community less diverse, (2) the diversity of bacterial communities in all types of water samples increased with water temperature, and (3) the first draw samples of hot tap water could have a comparable or even lower temperature than shower water samples and the second draw samples of cold tap water. In both a three-dimensional Non-metric multidimensional scaling ordination plot and a phylogenetic dendrogram, the samples of cold tap and shower water cluster and are separate from hot tap water samples (p < 0.05). In summary, the bacterial community in hot tap water in the simulated PPS had a distinct structure from and a much lower diversity than those in cold tap and shower water.

Biotransformation of halophenols into earthy-musty haloanisoles: Investigation of dominant bacterial contributors in drinking water distribution systems

Microorganisms in drinking water distribution systems (DWDSs) can O-methylate toxic halophenols (HPs) into earthy-musty haloanisoles (HAs). However, the dominant HA-producing bacterial species and their O-methylation properties are still unknown. In this study, eight bacterial strains from DWDS were isolated and the community abundances of the related genera in bulk water and biofilms as well as their O-methylation properties were investigated. Among the genera discovered in this study, Sphingomonas and Pseudomonas are dominant and play important roles in DWDSs. All bacteria could simultaneously convert five HPs to the corresponding HAs. Two Sphingomonas ursincola strains mainly produced 2,3,6-trichloroanisole (2,3,6-TCA) (2.48 × 10^-9-1.18 × 10^-8 ng/CFU), 2,4,6-trichloroanisole (2,4,6-TCA) (8.12 × 10^-10-3.11 × 10^-9 ng/CFU) and 2,4,6-tribromoanisole (2,4,6-TBA) (2.95 × 10^-9-3.21 × 10^-9 ng/CFU), while two Pseudomonas moraviensis strains preferred to generate 2-monochloroanisole (2-MCA) (1.19 × 10^-9-3.70 × 10^-9 ng/CFU) and 2,4-dichloroanisole (2,4-DCA) (3.81 × 10^-9-1.20 × 10^-8 ng/CFU). Among the chloramphenicol-susceptible strains, four strains contained inducible O-methyltransferases (OMTs), while the O-methylations of the others were expressed constitutively. All bacteria could use S-adenosyl methionine as methyl donor. Potential taste and odor (T & O) risks of five HAs in DWDS followed an order of 2,4,6-TBA > 2,4,6-TCA > 2,3,6-TCA > 2,4-DCA > 2-MCA. The recommended 2,4,6-TCP criteria for T & O control is 0.003-0.07 mg/L.