Light-Modulated Humidity Sensing in Spiropyran Functionalized MoS2 Transistors

The optically tuneable nature of hybrid organic/inorganic heterostructures tailored by interfacing photochromic molecules with 2D semiconductors (2DSs) can be exploited to endow multi-responsiveness to the exceptional physical properties of 2DSs. In this study, a spiropyran-molybdenum disulfide (MoS2) light-switchable bi-functional field-effect transistor is realized. The spiropyran-merocyanine reversible photo-isomerization has been employed to remotely control both the electron transport and wettability of the hybrid structure. This manipulation is instrumental for tuning the sensitivity in humidity sensing. The hybrid organic/inorganic heterostructure is subjected to humidity testing, demonstrating its ability to accurately monitor relative humidity (RH) across a range of 10%-75%. The electrical output shows good sensitivity of 1.0% · (%) RH-1. The light-controlled modulation of the sensitivity in chemical sensors can significantly improve their selectivity, versatility, and overall performance in chemical sensing.

Graphene oxide electrodes enable electrical stimulation of distinct calcium signalling in brain astrocytes

Astrocytes are responsible for maintaining homoeostasis and cognitive functions through calcium signalling, a process that is altered in brain diseases. Current bioelectronic tools are designed to study neurons and are not suitable for controlling calcium signals in astrocytes. Here, we show that electrical stimulation of astrocytes using electrodes coated with graphene oxide and reduced graphene oxide induces respectively a slow response to calcium, mediated by external calcium influx, and a sharp one, exclusively due to calcium release from intracellular stores. Our results suggest that the different conductivities of the substrate influence the electric field at the cell-electrolyte or cell-material interfaces, favouring different signalling events in vitro and ex vivo. Patch-clamp, voltage-sensitive dye and calcium imaging data support the proposed model. In summary, we provide evidence of a simple tool to selectively control distinct calcium signals in brain astrocytes for straightforward investigations in neuroscience and bioelectronic medicine.

Layer-by-layer Assembly of Nanosheets with Matching Size and Shape for More Stable Membrane Structure than Nanosheet-Polymer Assembly

Layer-by-layer (LbL) assembly of oppositely charged materials has been widely used as an approach to make two-dimensional (2D) nanosheet-based membranes, which often involves 2D nanosheets being alternately deposited with polymer-based polyelectrolytes to obtain an electrostabilized nanosheet-polymer structure. In this study, we hypothesized that using 2D nanosheets with matching physical properties as both polyanions and polycations may result in a more ordered nanostructure with better stability than a nanosheet-polymer structure. To compare the differences between nanosheet-nanosheet vs nanosheet-polymer structures, we assembled negatively charged molybdenum disulfide nanosheets (MoS2) with either positively charged graphene oxide (PrGO) nanosheets or positively charged polymer (PDDA). Using combined measurements by ellipsometer and quartz crystal microbalance with dissipation, we discovered that the swelling of MoS2-PrGO in ionic solutions was 60% lower than that of MoS2-PDDA membranes. Meanwhile, the MoS2-PrGO membrane retained its permeability upon drying, whereas the permeability of MoS2-PDDA decreased by 40% due to the restacking of MoS2. Overall, the MoS2-PrGO membrane demonstrated a better filtration performance. Additionally, our X-ray photoelectron spectroscopy results and analysis on layer density revealed a clearer transition in material composition during the LbL synthesis of MoS2-PrGO membranes, and the X-ray diffraction pattern suggested its resemblance to an ordered, layer-stacked structure. In conclusion, the MoS2-PrGO membrane made with nanosheets with matching size, shape, and charge density exhibited a much more aligned stacking structure, resulting in reduced membrane swelling under high salinity solutions, controlled restacking, and improved separation performance.

Binary Solvent Systems for Piezoelectric Printing Crack-Free PAM/ZrOx Hybrid Thin Films through Nanostructure Modulation

Polymer/oxide hybrid thin films, which have excellent electrical and mechanical performance, can be effectively fabricated through the sol-gel process, showing great potential in the future printed electronics. However, gelation of polymer/oxide ink systems can easily occur during a thermal process in which case capillary stress can lead to the crack of printed films due to the long period of stress accumulation. To solve this problem, the effect of different solvent systems on formed PAM/ZrO_x hybrid films, which were printed by piezoelectric printing, was studied in this paper, including single solvent systems of glycol and binary solvent systems of glycol and water. The result showed that the microstructure characteristics and mechanical properties of hybrid nanostructures formed in different solvent systems varied significantly, and crack behavior can be regulated by simply adjusting the water volume ratio of the solvent system. The crack formation was significantly inhibited when the water volume ratio reached 25%.

Multifunctionality of Reduced Graphene Oxide in Bioderived Polylactide/Poly(Dodecylene Furanoate) Nanocomposite Films

This work reports on the first attempt to prepare bioderived polymer films by blending polylactic acid (PLA) and poly(dodecylene furanoate) (PDoF). This blend, containing 10 wt% PDoF, was filled with reduced graphene oxide (rGO) in variable weight fractions (from 0.25 to 2 phr), and the resulting nanocomposites were characterized to assess their microstructural, thermal, mechanical, optical, electrical, and gas barrier properties. The PLA/PDoF blend resulted as immiscible, and the addition of rGO, which preferentially segregated in the PDoF phase, resulted in smaller (from 2.6 to 1.6 µm) and more irregularly shaped PDoF domains and in a higher PLA/PDoF interfacial interaction, which suggests the role of rGO as a blend compatibilizer. rGO also increased PLA crystallinity, and this phenomenon was more pronounced when PDoF was also present, thus evidencing a synergism between PDoF and rGO in accelerating the crystallization kinetics of PLA. Dynamic mechanical thermal analysis (DMTA) showed that the glass transition of PDoF, observed at approx. 5 °C, shifted to a higher temperature upon rGO addition. The addition of 10 wt% PDoF in PLA increased the strain at break from 5.3% to 13.0% (+145%), and the addition of 0.25 phr of rGO increased the tensile strength from 35.6 MPa to 40.2 MPa (+13%), without significantly modifying the strain at break. Moreover, rGO decreased the electrical resistivity of the films, and the relatively high percolation threshold (between 1 and 2 phr) was probably linked to the low aspect ratio of rGO nanosheets and their preferential distribution inside PDoF domains. PDoF and rGO also modified the optical transparency of PLA, resulting in a continuous decrease in transmittance in the visible/NIR range. Finally, rGO strongly modified the gas barrier properties, with a remarkable decrease in diffusivity and permeability to gases such as O2, N2, and CO2. Overall, the presented results highlighted the positive and sometimes synergistic role of PDoF and rGO in tuning the thermomechanical and functional properties of PLA, with simultaneous enhancement of ductility, crystallization kinetics, and gas barrier performance, and these novel polymer nanocomposites could thus be promising for packaging applications.

Graphene glial-interfaces: challenges and perspectives

Graphene nanosheets are mechanically strong but flexible, electrically conductive and bio-compatible. Thus, due to these unique properties, they are being intensively studied as materials for the next generation of neural interfaces. Most of the literature focused on optimizing the interface between these materials and neurons. However, one of the most common causes of implant failure is the adverse inflammatory reaction of glial cells. These cells are not, as previously considered, just passive and supportive cells, but play a crucial role in the physiology and pathology of the nervous system, and in the interaction with implanted electrodes. Besides providing structural support to neurons, glia are responsible for the modulation of synaptic transmission and control of central and peripheral homeostasis. Accordingly, knowledge on the interaction between glia and biomaterials is essential to develop new implant-based therapies for the treatment of neurological disorders, such as epilepsy, brain tumours, and Alzheimer's and Parkinson's disease. This work provides an overview of the emerging literature on the interaction of graphene-based materials with glial cells, together with a complete description of the different types of glial cells and problems associated with them. We believe that this description will be important for researchers working in materials science and nanotechnology to develop new active materials to interface, measure and stimulate these cells.

Multiscale Charge Transport in van der Waals Thin Films: Reduced Graphene Oxide as a Case Study

Large area van der Waals (vdW) thin films are assembled materials consisting of a network of randomly stacked nanosheets. The multiscale structure and the two-dimensional (2D) nature of the building block mean that interfaces naturally play a crucial role in the charge transport of such thin films. While single or few stacked nanosheets (i.e., vdW heterostructures) have been the subject of intensive works, little is known about how charges travel through multilayered, more disordered networks. Here, we report a comprehensive study of a prototypical system given by networks of randomly stacked reduced graphene oxide 2D nanosheets, whose chemical and geometrical properties can be controlled independently, permitting to explore percolated networks ranging from a single nanosheet to some billions with room-temperature resistivity spanning from 10^-5 to 10^-1 Ω·m. We systematically observe a clear transition between two different regimes at a critical temperature T*: Efros-Shklovskii variable-range hopping (ES-VRH) below T* and power law behavior above. First, we demonstrate that the two regimes are strongly correlated with each other, both depending on the charge localization length ξ, calculated by the ES-VRH model, which corresponds to the characteristic size of overlapping sp² domains belonging to different nanosheets. Thus, we propose a microscopic model describing the charge transport as a geometrical phase transition, given by the metal-insulator transition associated with the percolation of quasi-one-dimensional nanofillers with length ξ, showing that the charge transport behavior of the networks is valid for all geometries and defects of the nanosheets, ultimately suggesting a generalized description on vdW and disordered thin films.

Long-range selective transport of anions and cations in graphene oxide membranes, causing selective crystallization on the macroscale

Monoatomic nanosheets can form 2-dimensional channels with tunable chemical properties, for ion storage and filtering applications. Here, we demonstrate transport of K⁺, Na⁺, and Li⁺ cations and F^- and Cl^- anions on the centimeter scale in graphene oxide membranes (GOMs), triggered by an electric bias. Besides ion transport, the GOM channels foster also the aggregation of the selected ions in salt crystals, whose composition is not the same as that of the pristine salt present in solution, highlighting the difference between the chemical environment in the 2D channels and in bulk solutions.

Preparation of Nanocomposite-based High Performance Organic Field Effect Transistor via Solution Floating Method and Mechanical Property Evaluation

We demonstrate that using nanocomposite thin films consisting of semiconducting polymer, poly(3-hexylthiophene) (P3HT), and electrochemically exfoliated graphene (EEG) for the active channel layer of organic field-effect transistors (OFETs) improves both device performances and mechanical properties. The nanocomposite film was developed by directly blending P3HT solution with a dispersion of EEG at various weight proportions and simply transferring to an Si/SiO2 substrate by the solution floating method. The OFET based on P3HT/EEG nanocomposite film showed approximately twice higher field-effect mobility of 0.0391 cm²·V⁻¹·s⁻¹ and one order of magnitude greater on/off ratio of ~10⁴ compared with the OFET based on pristine P3HT. We also measured the mechanical properties of P3HT/EEG nanocomposite film via film-on-elastomer methods, which confirms that the P3HT/EEG nanocomposite film exhibited approximately 2.4 times higher modulus (3.29 GPa) than that of the P3HT film (1.38 GPa), while maintaining the good bending flexibility and durability over 10.0% of bending strain and bending cycles (1000 cycles). It was proved that the polymer hybridization technique, which involves adding EEG to a conjugated polymer, is a powerful route for enhancing both device performances and mechanical properties while maintaining the flexible characteristics of OFET devices.

Enhancement of Charge Transport in Polythiophene Semiconducting Polymer by Blending with Graphene Nanoparticles

This paper describes a study on the charge transport in a composite of liquid-exfoliated graphene nanoparticles (GNPs) and a polythiophene semiconducting polymer. While the former component is highly conducting, although it consists of isolated nanostructures, the latter offers an efficient charge transport path between the individual GNPs within the film, overall yielding enhanced charge transport properties of the resulting bi-component system. The electrical characteristics of the composite layers were investigated by means of measurements of time-of-flight photoconductivity and transconductance in field-effect transistors. In order to analyze both phenomena separately, charge density and charge mobility contributions to the conductivity were singled out. With the increasing GNP concentration, the charge mobility was found to increase, thereby reducing the time spent by the carriers on the polymer chains. In addition, for GNP loading above 0.2 % (wt.), an increase of free charge density was observed that highlights an additional key role played by doping. Variable-range hopping model of a mixed two- and three-dimensional transport is explained using temperature dependence of mobility and free charge density. The temperature variation of free charge density was related to the electron transfer from polythiophene to GNP, with an energy barrier of 24 meV.

A method to easily control the interfacial interactions between poly(3-hexylthiophene) and graphene oxide in an ultrasonicated solution

Controlling the charge-transfer interaction between poly(3-hexylthiophene) (P3HT) and graphene oxide (GO) is important to improve the performance of P3HT-based devices.

2D-Organic Hybrid Heterostructures for Optoelectronic Applications

The unique properties of hybrid heterostructures have motivated the integration of two or more different types of nanomaterials into a single optoelectronic device structure. Despite the promising features of organic semiconductors, such as their acceptable optoelectronic properties, availability of low-cost processes for their fabrication, and flexibility, further optimization of both material properties and device performances remains to be achieved. With the emergence of atomically thin 2D materials, they have been integrated with conventional organic semiconductors to form multidimensional heterostructures that overcome the present limitations and provide further opportunities in the field of optoelectronics. Herein, a comprehensive review of emerging 2D-organic heterostructures-from their synthesis and fabrication to their state-of-the-art optoelectronic applications-is presented. Future challenges and opportunities associated with these heterostructures are highlighted.

Nanoscale J-aggregates of poly(3-hexylthiophene): key to electronic interface interactions with graphene oxide as revealed by KPFM

The nanoscale aggregate structure of conjugated polymers critically determines the performance of organic thin film optoelectronic devices. Their impact on electronic interface interactions with adjacent layers of graphene, widely reported to improve the device characteristics, yet remains an open issue, which needs to be addressed by an appropriate benchmark system. Here, we prepared discrete ensembles of poly(3-hexylthiophene) nanoparticles and graphene oxide sheets (P3HTNPs-GO) with well-defined aggregate structures of either J- or H-type and imaged their photogenerated charge transfer dynamics across their interface by Kelvin probe force microscopy (KPFM). A distinctive inversion of the sign of the surface potential and surface photovoltage (SPV) demonstrates that J-aggregates are decisive for establishing charge transfer interactions with GO. These enable efficient injection of photogenerated holes from P3HTNPs into GO sheets over a range of tens of nanometers, causing a slow SPV relaxation dynamics, and define their operation as an efficient hole-transport layer (HTL). Conversely, H-type aggregates do not facilitate specific interactions and entrust GO sheets the role of charge-blocking layers (CBLs). The direct effect of the aggregate structure of P3HT on the functional operation of GO as a HTL or CBL thus establishes clear criteria towards the rational design of improved organic optoelectronic devices.

Simultaneous Voltammetric Determination of Gallic and Protocatechuic Acids in Mango Juice Using a Reduced Graphene Oxide-Based Electrochemical Sensor

A simple and sensitive reduced graphene oxide-modified glassy carbon electrode-based electrochemical sensor was used for the concomitant determination of gallic acid (GA) and protocatechuic (PA) acid. The prepared sensor showed a significant enhancement in synergetic electro-catalytic performance towards GA and PA oxidation. A good resolution of the voltammetry peaks was obtained and a method of square wave voltammetry was developed for detection. The modified electrode was characterized by electrochemical techniques. The optimal experimental parameters were considered. GA and PA exhibited a linear increase in the peak currents with their concentrations in the range from 20 to 144 µmol·L−1 for GA and from 20 to 166 µmol·L−1 for PA, with limits of detection (S/N = 3) of 30.8 µmol·L−1 for GA and 10.2 µmol·L−1 for PA. The sensor applicability was simultaneously tested for the analytical determination of GA and PA in mango juice and exhibited a robust functionality.

Influence of atmospheric species on the electrical properties of functionalized graphene sheets

We report on the time-dependent influence of atmospheric species on the electrical properties of functionalized graphene sheets (FGSs). When exposed to laboratory air, FGSs exhibit a significant, irreversible decrease in electrical conductance with time, strongly depending on the oxygen content of the FGSs. To separate the roles of charge carrier density and mobility in this aging process, we performed electron transport measurements using a back-gate field-effect transistor architecture. Investigating the position of the Dirac point under different atmospheres, we found that adsorbed atmospheric species result in pronounced p-doping, which - on a short time scale - can be reversed under nitrogen atmosphere. However, on a time scale of several days, the resistance increases irreversibly, while the Dirac point voltage remains constant. From these experiments, we conclude that the aging of FGSs is related to the chemisorption of atmospheric species leading to enhanced carrier scattering due to an increasing amount of sp3- regions and thus to a reduced charge carrier mobility.

Effects of ultrasonication on the interfacial interactions between poly(3-hexylthiophene) and graphene oxide

The interactions between poly(3-hexylthiophene) (P3HT) and graphene oxide (GO) have endowed the P3HT/GO composite with excellent properties. Controlling these interactions is important to improve the performance of P3HT-based devices. In this work, ultrasonication was used to regulate the nanostructures of P3HTs (high Mw and low Mw), and further strongly affected the interactions between P3HTs and GO. Atomic force microscopy (AFM), UV-vis absorption spectroscopy, Raman spectroscopy, and grazing incidence X-ray diffraction (GIXRD) were used to study the effects of ultrasonication on the interfacial interactions between P3HTs and GO. With prolonged ultrasonication time, the molecular order of high Mw P3HT nanofibers increased, but that of low Mw P3HT nanofibers decreased. Molecular order is a crucial factor affecting the interfacial interactions between P3HTs and GO, and the amounts of P3HT nanofibers absorbed onto the GO surface increased with the decreased molecular order of the nanofibers. After absorption, the overall molecular order of P3HT/GO composite nanofibers was determined by the nanofibers absorbed onto the GO surface and the nanofibers nucleated by GO. Compared with the molecular order of the nanofibers before absorption, the overall molecular order of the composites with high Mw P3HT increased, but that of composites with low Mw P3HT decreased. These findings can help to understand and modulate the interactions between P3HT nanofibers and GO to provide more information in the field of interfacial engineering of conjugated polymers in polymer-based devices.

Biomimetic graphene for enhanced interaction with the external membrane of astrocytes

Graphene and graphene substrates display huge potential as material interfaces for devices and biomedical tools targeting the modulation or recovery of brain functionality. However, to be considered reliable neural interfaces, graphene-derived substrates should properly interact with astrocytes, favoring their growth and avoiding adverse gliotic reactions. Indeed, astrocytes are the most abundant cells in the human brain and they have a crucial physiological role to maintain its homeostasis and modulate synaptic transmission. In this work, we describe a new strategy based on the chemical modification of graphene oxide (GO) with a synthetic phospholipid (PL) to improve interaction of GO with brain astroglial cells. The PL moieties were grafted on GO sheets through polymeric brushes obtained by atom-transfer radical-polymerization (ATRP) between acryloyl-modified PL and GO nanosheets modified with a bromide initiator. The adhesion of primary rat cortical astrocytes on GO-PL substrates increased by about three times with respect to that on glass substrates coated with standard adhesion agents (i.e. poly-d-lysine, PDL) as well as with respect to that on non-functionalized GO. Moreover, we show that astrocytes seeded on GO-PL did not display significant gliotic reactivity, indicating that the material interface did not cause a detrimental inflammatory reaction when interacting with astroglial cells. Our results indicate that the reported biomimetic approach could be applied to neural prosthesis to improve cell colonization and avoid glial scar formation in brain implants. Additionally, improved adhesion could be extremely relevant in devices targeting neural cell sensing/modulation of physiological activity.

Electrochemical and Electronic Properties of Transparent Coating from Highly Solution Processable Graphene Using Block Copolymer Supramolecular Assembly: Application toward Metal Ion Sensing and Resistive Switching Memory

Here, we have discussed the preparation of a highly solution processable graphene from a novel supramolecular assembly consisting of block copolymer polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) and pyrenebutyric acid (PBA)-modified reduced graphene oxide (RGO). The PBA molecules anchored on the graphene surface form supramolecules with PS-b-P4VP through H-bonding between the carboxylic acid group of 1-pyrenebutyric acid and the pyridine ring of P4VP. The formation of a supramolecular assembly results in a highly stable solution of reduced graphene oxide in common organic solvents, such as 1,4-dioxane and chloroform. Highly transparent and mechanically stable thin films can be deposited from these supramolecular assemblies on a relatively smooth surface of different substrates such as silicon wafer, glass, indium tin oxide, and flexible polymer substrates like poly(ethylene terephthalate). The graphene surface modifier (PBA) can be selectively removed from the thin film of the hybrid material by simple dissolution, resulting in a porous structure. Hybrid thin films of around 50 nm thickness exhibit interesting electrochemical properties with an areal capacitance value of 17.73 μF/cm2 at a current density of 2.66 μA/cm2 and good electrochemical stability. The pendent P4VP chains present in the composite thin film were further exploited for electrochemical detection of metal ions. The electrical measurement of the thin film sandwich structure of the composite shows a bipolar resistive switching memory with hysteresis-like current-voltage characteristics and electrical bistability. The OFF state shows ohmic conduction at a lower voltage and trap-free space-charge-limited current (SCLC) conduction at high voltage, whereas the ON state conduction is controlled by ohmic at low bias voltage, trap-free SCLC at moderate voltage, and tarp-assisted SCLC at high voltage.

In situ visualization and detection of surface potential variation of mono and multilayer MoS2 under different humidities using Kelvin probe force microscopy

The surface potential (SP) variations in mono and multilayer molybdenum disulfide (MoS2) are visualized in situ and detected using Kelvin probe force microscopy (KPFM) in different humidity conditions for the first time. N-type doping, which originates from the SiO2 substrate, is discovered in the exfoliated MoS2 and is accompanied by a screening length of five layers. The influence of water, which serves as an environmental gating for MoS2, is investigated by controlling the relative humidities (RHs) in the environmental chamber. A monotonic decrease in the SP is observed when the threshold concentration is achieved. This corresponds to the Fermi level variation, which is dominated by different processes. The results also indicate that water adsorption could result in MoS2 p-type doping and provide compensation that partially counteracts the substrate effect. Under this condition, the interlayer screening effect is influenced because of the water dipole-induced electric field. Density functional theory calculations are performed to determine the band structure variations and the interactions between water molecules and between water molecules and the MoS2 surface in mono and trilayer MoS2 under different RHs. The calculations are in excellent agreement with the experimental results. We propose that in situ measurements of the SP using KPFM under different environmental regimes is a noninvasive and effective method to provide real-time visualization and detection of electronic property variations in two-dimensional materials.

Uptake of label-free graphene oxide by Caco-2 cells is dependent on the cell differentiation status

BACKGROUND

Understanding the interaction of graphene-related materials (GRM) with human cells is a key to the assessment of their potential risks for human health. There is a knowledge gap regarding the potential uptake of GRM by human intestinal cells after unintended ingestion. Therefore the aim of our study was to investigate the interaction of label-free graphene oxide (GO) with the intestinal cell line Caco-2 in vitro and to shed light on the influence of the cell phenotype given by the differentiation status on cellular uptake behaviour.

RESULTS

Internalisation of two label-free GOs with different lateral size and thickness by undifferentiated and differentiated Caco-2 cells was analysed by scanning electron microscopy and transmission electron microscopy. Semi-quantification of cells associated with GRM was performed by flow cytometry. Undifferentiated Caco-2 cells showed significant amounts of cell-associated GRM, whereas differentiated Caco-2 cells exhibited low adhesion of GO sheets. Transmission electron microscopy analysis revealed internalisation of both applied GO (small and large) by undifferentiated Caco-2 cells. Even large GO sheets with lateral dimensions up to 10 µm, were found internalised by undifferentiated cells, presumably by macropinocytosis. In contrast, no GO uptake could be found for differentiated Caco-2 cells exhibiting an enterocyte-like morphology with apical brush border.

CONCLUSIONS

Our results show that the internalisation of GO is highly dependent on the cell differentiation status of human intestinal cells. During differentiation Caco-2 cells undergo intense phenotypic changes which lead to a dramatic decrease in GRM internalisation. The results support the hypothesis that the cell surface topography of differentiated Caco-2 cells given by the brush border leads to low adhesion of GO sheets and sterical hindrance for material uptake. In addition, the mechanical properties of GRM, especially flexibility of the sheets, seem to be an important factor for internalisation of large GO sheets by epithelial cells. Our results highlight the importance of the choice of the in vitro model to enable better in vitro-in vivo translation.

Synthesis of Graphene-Based Sensors and Application on Detecting SF6 Decomposing Products: A Review

Graphene-based materials have aroused enormous focus on a wide range of engineering fields because of their unique structure. One of the most promising applications is gas adsorption and sensing. In electrical engineering, graphene-based sensors are also employed as detecting devices to estimate the operation status of gas insulated switchgear (GIS). This paper reviews the main synthesis methods of graphene, gas adsorption, and sensing mechanism of its based sensors, as well as their applications in detecting SF₆ decomposing products, such as SO₂, H₂S, SO₂F₂, and SOF₂, in GIS. Both theoretical and experimental researches on gas response of graphene-based sensors to these typical gases are summarized. Finally, the future research trend about graphene synthesis technique and relevant perspective are also given.

Investigation of the Effect of Thermal Annealing on Poly(3-hexylthiophene) Nanofibers by Scanning Probe Microscopy: From Single-Chain Conformation and Assembly Behavior to the Interfacial Interactions with Graphene Oxide

Poly(3-hexylthiophene) (P3HT) has been widely used in devices owing to its excellent properties and structural features. However, devices based on pure P3HT have not exhibited high performance. Strategies, such as thermal annealing and surface doping, have been used to improve the electrical properties of P3HT. In this work, different from previous studies, the effect of thermal annealing on P3HT nanofibers are examined, ranging from the single polymer chain conformation to chain packing, and the interfacial interactions with graphene oxide (GO) at nanoscale dimensions, by using scanning tunneling microscopy (STM), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). High-resolution STM images directly show the conformational changes of single polymer chains after thermal annealing. The morphology of P3HT nanofibers and the surface potential changes of the P3HT nanofibers and GO is further investigated by AFM and KPFM at the nanoscale, which demonstrate that the surface potentials of P3HT decrease, whereas that of GO increases after thermal annealing. All of the results demonstrate the stronger interfacial interactions between P3HT and GO occur after thermal treatments due to the changes in P3HT chain conformation and packing order.

Synthesis and applications of carbon nanomaterials for energy generation and storage

The world is facing an energy crisis due to exponential population growth and limited availability of fossil fuels. Over the last 20 years, carbon, one of the most abundant materials found on earth, and its allotrope forms such as fullerenes, carbon nanotubes and graphene have been proposed as sources of energy generation and storage because of their extraordinary properties and ease of production. Various approaches for the synthesis and incorporation of carbon nanomaterials in organic photovoltaics and supercapacitors have been reviewed and discussed in this work, highlighting their benefits as compared to other materials commonly used in these devices. The use of fullerenes, carbon nanotubes and graphene in organic photovoltaics and supercapacitors is described in detail, explaining how their remarkable properties can enhance the efficiency of solar cells and energy storage in supercapacitors. Fullerenes, carbon nanotubes and graphene have all been included in solar cells with interesting results, although a number of problems are still to be overcome in order to achieve high efficiency and stability. However, the flexibility and the low cost of these materials provide the opportunity for many applications such as wearable and disposable electronics or mobile charging. The application of carbon nanotubes and graphene to supercapacitors is also discussed and reviewed in this work. Carbon nanotubes, in combination with graphene, can create a more porous film with extraordinary capacitive performance, paving the way to many practical applications from mobile phones to electric cars. In conclusion, we show that carbon nanomaterials, developed by inexpensive synthesis and process methods such as printing and roll-to-roll techniques, are ideal for the development of flexible devices for energy generation and storage - the key to the portable electronics of the future.

Work Function Modification in P3HT H/J Aggregate Nanostructures Revealed by Kelvin Probe Force Microscopy and Photoluminescence Imaging

We show that surface electronic properties of poly-3-hexylthiophene (P3HT) crystalline nanofibers as probed by Kelvin probe force microscopy (KPFM) depends sensitively on the degree of polymer packing order and dominant coupling type (e.g., H- or J-aggregate) as signaled by absorption or photoluminescence spectroscopy. Nominal HOMO energies between high molecular weight (J-aggregate) nanofibers and low-molecular weight (H-aggregate) nanofibers differ by ≈160 meV. This is consistent with shifts expected from H-type charge-transfer (CT) interactions that lower HOMO energies according to registration between thiophene moieties on adjacent polymer chains. These results show how KPFM combined with wavelength-resolved photoluminescence imaging can be used to extract information on "dark" (CT) interactions in polymer assemblies.

Morphology-dependent electronic properties in cross-linked (P3HT-b-P3MT) block copolymer nanostructures

Combined Kelvin probe force microscopy and wavelength-resolved photoluminescence measurements on individual pre- and post-cross-linked poly(3-hexylthiophene)-b-poly(3-methyl alcohol thiophene) (P3HT-b-P3MT) nanofibers have revealed striking differences in their optical and electronic properties driven by structural perturbation of the crystalline aggregate nanofiber structures after cross-linking. Chemical cross-linking from diblock copolymer P3HT-b-P3MT using a hexamethylene diisocyanate cross-linker produces a variety of morphologies including very small nanowires, nanofiber bundles, nanoribbons, and sheets, whose relative abundance can be controlled by reaction time and cross-linker concentration. While the different cross-linked morphologies have almost identical photophysical characteristics, KPFM measurements show that the surface potential contrast, related to the work function of the sample, depends sensitively on nanostructure morphology related to chain-packing disorder.

Leveraging the ambipolar transport in polymeric field-effect transistors via blending with liquid-phase exfoliated graphene

Enhancement in the ambipolar behavior of field-effect transistors based on an n-type polymer, P(NDI2OD-T2), is obtained by co-deposition with liquid-phase exfoliated graphene. This approach provides a prospective pathway for the application of graphene-based nanocomposites for logic circuits.

Highly NO2 sensitive caesium doped graphene oxide conductometric sensors

Here we report on the synthesis of caesium doped graphene oxide (GO-Cs) and its application to the development of a novel NO2 gas sensor. The GO, synthesized by oxidation of graphite through chemical treatment, was doped with Cs by thermal solid-state reaction. The samples, dispersed in DI water by sonication, have been drop-casted on standard interdigitated Pt electrodes. The response of both pristine and Cs doped GO to NO2 at room temperature is studied by varying the gas concentration. The developed GO-Cs sensor shows a higher response to NO2 than the pristine GO based sensor due to the oxygen functional groups. The detection limit measured with GO-Cs sensor is ≈90 ppb.

Graphene nanoribbon blends with P3HT for organic electronics

In organic field-effect transistors (OFETs) the electrical characteristics of polymeric semiconducting materials suffer from the presence of structural/morphological defects and grain boundaries as well as amorphous domains within the film, hindering an efficient transport of charges. To improve the percolation of charges we blend a regioregular poly(3-hexylthiophene) (P3HT) with newly designed N = 18 armchair graphene nanoribbons (GNRs). The latter, prepared by a bottom-up solution synthesis, are expected to form solid aggregates which cannot be easily interfaced with metallic electrodes, limiting charge injection at metal-semiconductor interfaces, and are characterized by a finite size, thus by grain boundaries, which negatively affect the charge transport within the film. Both P3HT and GNRs are soluble/dispersible in organic solvents, enabling the use of a single step co-deposition process. The resulting OFETs show a three-fold increase in the charge carrier mobilities in blend films, when compared to pure P3HT devices. This behavior can be ascribed to GNRs, and aggregates thereof, facilitating the transport of the charges within the conduction channel by connecting the domains of the semiconductor film. The electronic characteristics of the devices such as the Ion/Ioff ratio are not affected by the addition of GNRs at different loads. Studies of the electrical characteristics under illumination for potential use of our blend films as organic phototransistors (OPTs) reveal a tunable photoresponse. Therefore, our strategy offers a new method towards the enhancement of the performance of OFETs, and holds potential for technological applications in (opto)electronics.

Tuning electrical properties in amorphous zinc tin oxide thin films for solution processed electronics

Solution processed zinc tin oxide (ZTO) thin film transistors (TFTs) were fabricated by varying the Zn/Sn composition. The addition of Sn to the zinc oxide (ZnO) films resulted in improved electrical characteristics, with devices of Zn0.7Sn0.3O composition showing the highest mobility of 7.7 cm(2)/(V s). An improvement in subthreshold swings was also observed, indicative of a reduction of the interfacial trap densities. Mobility studies at low temperature have been carried out, which indicated that the activation energy was reduced with Sn incorporation. Kelvin probe force microscopy was performed on the films to evaluate work function and correlated to the metal-semiconductor barrier indicating Zn0.7Sn0.3O films had the smallest barrier for charge injection. Organic-inorganic hybrid complementary inverters with a maximum gain of 10 were fabricated by integrating ZTO TFTs with poly-3-hexylthiophene (P3HT) transistors.

Optoelectronic properties of graphene thin films deposited by a Langmuir-Blodgett assembly

Large area thin films of few-layered unfunctionalized graphene platelets are developed with fine control over the thickness. The thin films are obtained by a Langmuir-Blodgett assembly at the interface of graphene solution in N-methyl-2-pyrrolidone (NMP) and water, and their optoelectronic properties and conduction mechanism are investigated in relation to lateral flake size and thin film thickness. The electrical conductivity and carrier mobility are affected by the flake size (200 nm to 1 μm) and by the packing of the nanostructure platelet network. General effective medium theory is used to explain the thickness dependent conductivity and to determine the percolation threshold film thickness which was found to be about 10 nm (at a volume fraction of ~39%) for a Langmuir-Blodgett film of an average platelet lateral size of 170 ± 40 nm. The electronic behaviour of the material shows more similarities with polycrystalline turbostratic graphite than thin films of reduced graphene oxide, carbon nanotubes, or disordered conducting polymers. While in these systems the conduction mechanism is often dominated by the presence of an energy barrier between conductive and non-conductive regions in the network, in the exfoliated graphene networks the conduction mechanism can be explained by the simple two-band model which is characteristic of polycrystalline graphite.

Evidencing the mask effect of graphene oxide: a comparative study on primary human and murine phagocytic cells

Graphene oxide (GO) is attracting an ever-growing interest in different fields and applications. Not much is known about the possible impact of GO sheet lateral dimensions on their effects in vitro, especially on human primary cells. In an attempt to address this issue, we present a study to evaluate, how highly soluble 2-dimensional GO constituted of large or small flakes affects human monocyte derived macrophages (hMDM). For this purpose, the lateral size of GO was tuned using sonication and three samples were obtained. The non sonicated one presented large flakes (~1.32 μm) while sonication for 2 and 26 hours generated small (~0.27 μm) and very small (~0.13 μm) sheets of GO, respectively. Cell studies were then conducted to evaluate the cytotoxicity, the oxidative stress induction, the activation potential and the pro-inflammatory effects of these different types of GO at increasing concentrations. In comparison, the same experiments were run on murine intraperitoneal macrophages (mIPM). The interaction between GO and cells was further examined by TEM and Raman spectroscopy. Our data revealed that the GO sheet size had a significant impact on different cellular parameters (i.e. cellular viability, ROS generation, and cellular activation). Indeed, the more the lateral dimensions of GO were reduced, the higher were the cellular internalization and the effects on cellular functionality. Our data also revealed a particular interaction of GO flakes with the cellular membrane. In fact, a GO mask due to the parallel arrangement of the graphene sheets on the cellular surface was observed. Considering the mask effect, we have hypothesized that this particular contact between GO sheets and the cell membrane could either promote their internalization or isolate cells from their environment, thus possibly accounting for the following impact on cellular parameters.

Graphene Oxide-Polythiophene Hybrid with Broad-Band Absorption and Photocatalytic Properties

Hybrid graphene oxide (GO)/poly(3-hexylthiophene-2,5-diyl) (P3HT) sheets are assembled via π-π interaction and carefully isolated from the nonreacted precursors. The mutual influence of the two phases can be sharply manifested in this layer-to-layer configuration because it is undiluted by excess of one phase. To investigate the optical properties of the hybrid and possible synergistic interactions, we applied photothermal deflection spectroscopy (PDS) and pump-probe techniques. For the first time, the photocatalytic performance of these hybrids was investigated to correlate with their optical properties. The GO-P3HT hybrid demonstrates broad-band absorption and ultrafast charge transfer (1.4 ps) and acts as an excellent photocatalyst for the Mannich reaction (93% yield).

Nanoscale charge distribution and energy band modification in defect-patterned graphene

Defects were introduced precisely to exfoliated graphene (G) sheets on a SiO(2)/n(+) Si substrate to modulate the local energy band structure and the electron pathway using solution-phase oxidation followed by thermal reduction. The resulting nanoscale charge distribution and band gap modification were investigated by electrostatic force microscopy and spectroscopy. A transition phase with coexisting submicron-sized metallic and insulating regions in the moderately oxidized monolayer graphene were visualized and measured directly. It was determined that the delocalization of electrons/holes in a graphene "island" is confined by the surrounding defective C-O matrix, which acts as an energy barrier for mobile charge carriers. In contrast to the irreversible structural variations caused by the oxidation process, the electrical properties of graphene can be restored by annealing. The defect-patterned graphene and graphene oxide heterojunctions were further characterized by electrical transport measurement.

Large area extreme-UV lithography of graphene oxide via spatially resolved photoreduction

The ability to pattern graphene over large areas with nanometer resolution is the current request for nanodevice fabrication at the industrial scale. Existing methods do not match high throughput with nanometer resolution. We propose a high-throughput resistless extreme-UV (EUV) photolithographic approach operating with sub-micrometer resolution on large area (~10 mm(2)) graphene oxide (GO) films via spatially resolved photoreduction. The efficiency of EUV photoreduction is tested with 46.9 nm coherent light produced by a table top capillary discharge plasma source. Irradiated samples are studied by X-ray photoemission spectroscopy (XPS) and micro-Raman Spectroscopy (μRS). XPS data show that 200 mJ/cm(2) EUV dose produces, onto pristine GO, a 6% increase of sp(2) carbon bonds and a 20% decrease of C-O bonds. μRS data demonstrate a photoreduction efficiency 2 orders of magnitude higher than the one reported in the literature for UV-assisted photoreduction. GO patterning is obtained modulating the EUV dose with a Lloyd's interferometer. The lithographic features consist of GO stripes with modulated reduction degree. Such modulation is investigated and demonstrated by μRS on patterns with 2 μm periodicity.

Coplanar asymmetrical reduced graphene oxide-titanium electrodes for polymer photodetectors

Narrow gaps and a "built-in" potential originating from the different work functions of reduced graphene oxide (RGO) and titanium electrodes are used to explain the improved photosensitivity of the poly(3-hexylthiophene) photodetectors with asymmetrical RGO-Ti electrodes presented here compared to those based on symmetrical electrodes. Easy processing, high photosensitivity, high on/off ratio, and low energy consumption contribute to the promising potential of coplanar asymmetrical electrodes in the field of photoelectric devices.

Design of a polymer-carbon nanohybrid junction by interface modeling for efficient printed transistors

Molecularly hybridized materials composed of polymer semiconductors (PSCs) and single-walled carbon nanotubes (SWNTs) may provide a new way to exploit an advantageous combination of semiconductors, which yields electrical properties that are not available in a single-component system. We demonstrate for the first time high-performance inkjet-printed hybrid thin film transistors with an electrically engineered heterostructure by using specially designed PSCs and semiconducting SWNTs (sc-SWNTs) whose system achieved a high mobility of 0.23 cm(2) V(-1) s(-1), no V(on) shift, and a low off-current. PSCs were designed by calculation of the density of states of the backbone structure, which was related to charge transfer. The sc-SWNTs were prepared by a single cascade of the density-induced separation method. We also revealed that the binding energy between PSCs and sc-SWNTs was strongly affected by the side-chain length of PSCs, leading to the formation of a homogeneous nanohybrid film. The understanding of electrostatic interactions in the heterostructure and experimental results suggests criteria for the design of nanohybrid heterostructures.