Unraveling the effects of geometrical parameters on dynamic impact responses of graphene reinforced polymer nanocomposites using coarse-grained molecular dynamics simulations

Nacre plays an important role in bionic design due to its light weight, high strength, and structure-function integration. The key to elucidate its reinforcing and toughening mechanisms is to truly characterize its multi-layer structure and properties. In this work, the dynamic impact responses of graphene reinforced polymer nanocomposites with a unique brick-and-mortar structure are investigated using coarse-grained molecular dynamics simulations, in which the interfacial coarse-grained force field between graphene and the polymer matrix is derived by the energy matching approach. The influences of various geometrical parameters on dynamic impact responses of the nanocomposites are studied, including the interlayer distance, lateral distance, and number of graphene layers. The results demonstrate that the impact resistance of the nacre-like structure can be significantly improved by tuning the geometrical parameters of graphene layers. It is also found that the chain scission and interchain disentanglement of polymer chains are the main failure mechanisms during the perforation failure process as compared to the stretching and breaking of bonds. In addition, the microstructure analysis is performed to deeply interpret the deformation and damage mechanisms of the nanocomposites during impact. This study could be helpful for the rational design and preparation of graphene reinforced nacre-like nanocomposites with high impact resistance.

Elastic constants of biogenic calcium carbonate

Living organisms form complex mineralized composite architectures that perform a variety of essential functions. These materials are commonly utilized for load-bearing purposes such as structural stability and mechanical strength in combination with high toughness and deformability, which are well demonstrated in various highly mineralized molluscan shell ultrastructures. Here, the mineral components provide the general stiffness to the composites, and the organic interfaces play a key role in providing these biogenic architectures with mechanical superiority. Although numerous studies employed state-of-the-art methods to measure and/or model and/or simulate the mechanical behavior of molluscan shells, our understanding of their performance is limited. This is partially due to the lack of the most fundamental knowledge of their mechanical characteristics, particularly, the anisotropic elastic properties of the mineral components and of the tissues they form. In fact, elastic constants of biogenic calcium carbonate, one of the most common biominerals in nature, is unknown for any organism. In this work, we employ the ultrasonic pulse-echo method to report the elasticity tensor of two common ultrastructural motifs in molluscan shells: the prismatic and the nacreous architectures made of biogenic calcite and aragonite, respectively. The outcome of this research not only provides information necessary for fundamental understanding of biological materials formation and performance, but also yields textbook knowledge on biogenic calcium carbonate required for future structural/crystallographic, theoretical and computational studies.

3D-printed bioinspired spicules: Strengthening and toughening via stereolithography

Recently, the replication of biological microstructures has garnered significant attention due to their superior flexural strength and toughness, coupled with lightweight structures. Among the most intriguing biological microstructures renowned for their flexural strength are those found in the Euplectella Aspergillum (EA) marine sponges. The remarkable strength of this sponge is attributed to its complex microstructure, which consists of concentric cylindrical layers known as spicules with organic interlayers. These features effectively impede large crack propagation, imparting extraordinary mechanical properties. However, there have been limited studies aimed at mimicking the spicule microstructure. In this study, structures inspired by spicules were designed and fabricated using the stereolithography (SLA) 3D printing technique. The mechanical properties of concentric cylindrical structures (CCSs) inspired by the spicule microstructure were evaluated, considering factors such as the wall thickness of the cylinders, the number of layers, and core diameter, all of which significantly affect the mechanical response. These results were compared with those obtained from solid rods used as solid samples. The findings indicated that CCSs with five layers or fewer exhibited a flexural strength close to or higher than that of solid rods. Particularly, samples with 4 and 5 cylindrical layers displayed architecture similar to natural spicules. Moreover, in all CCSs, the absorbed energy was at least 3-4 times higher than solid rods. Conversely, CCSs with a cylinder wall thickness of 0.65 mm exhibited a more brittle behavior under the 3-point bending test than those with 0.35 mm and 0.5 mm wall thicknesses. CCSs demonstrated greater resistance to failure, displaying different crack propagation patterns and shear stress distributions under the bending test compared to solid rods. These results underscore that replicating the structure of spicules and producing structures with concentric cylindrical layers can transform a brittle structure into a more flexible one, particularly in load-bearing applications.

Exploring the Potential of Nonclassical Crystallization Pathways to Advance Cementitious Materials

Understanding the crystallization of cement-binding phases, from basic units to macroscopic structures, can enhance cement performance, reduce clinker use, and lower CO2 emissions in the construction sector. This review examines the crystallization pathways of C-S-H (the main phase in PC cement) and other alternative binding phases, particularly as cement formulations evolve toward increasing SCMs and alternative binders as clinker replacements. We adopt a nonclassical crystallization perspective, which recognizes the existence of critical intermediate steps between ions in solution and the final crystalline phases, such as solute ion associates, dense liquid phases, amorphous intermediates, and nanoparticles. These multistep pathways uncover innovative strategies for controlling the crystallization of binding phases through additive use, potentially leading to highly optimized cement matrices. An outstanding example of additive-controlled crystallization in cementitious materials is the synthetically produced mesocrystalline C-S-H, renowned for its remarkable flexural strength. This highly ordered microstructure, which intercalates soft matter between inorganic and brittle C-S-H, was obtained by controlling the assembly of individual C-S-H subunits. While large-scale production of cementitious materials by a bottom-up self-assembly method is not yet feasible, the fundamental insights into the crystallization mechanism of cement binding phases presented here provide a foundation for developing advanced cement-based materials.

Exploiting Saturation Regimes and Surface Effects to Tune Composite Design: Single Platelet Nanocomposites of Peptoid Nanosheets and CaCO3

Mineral-polymer composites found in nature exhibit exceptional structural properties essential to their function, and transferring these attributes to the synthetic design of functional materials holds promise across various sectors. Biomimetic fabrication of nanocomposites introduces new pathways for advanced material design and explores biomineralization strategies. This study presents a novel approach for producing single platelet nanocomposites composed of CaCO3 and biomimetic peptoid (N-substituted glycines) polymers, akin to the bricks found in the brick-and-mortar structure of nacre, the inner layer of certain mollusc shells. The significant aspect of the proposed strategy is the use of organic peptoid nanosheets as the scaffolds for brick formation, along with their controlled mineralization in solution. Here, we employ the B28 peptoid nanosheet as a scaffold, which readily forms free-floating zwitterionic bilayers in aqueous solution. The peptoid nanosheets were mineralized under consistent initial conditions (σcalcite = 1.2, pH 9.00), with variations in mixing conditions and supersaturation profiles over time aimed at controlling the final product. Nanosheets were mineralized in both feedback control experiments, where supersaturation was continuously replenished by titrant addition and in batch experiments without a feedback loop. Complete coverage of the nanosheet surface by amorphous calcium carbonate was achieved under specific conditions with feedback control mineralization, whereas vaterite was the primary CaCO3 phase observed after batch experiments. Thermodynamic calculations suggest that time-dependent supersaturation profiles as well as the spatial distribution of supersaturation are effective controls for tuning the mineralization extent and product. We anticipate that the control strategies outlined in this work can serve as a foundation for the advanced and scalable fabrication of nanocomposites as building blocks for nacre-mimetic and functional materials.

Performance of 3D printing biomimetic conch shell and pearl shell hybrid design composites under quasi-static three-point bending load

The failure process of biomimetic hybrid design composite composed of layers of conch shell and pearl shell was studied through quasi-static three-point bending experiments and numerical simulations. The biomimetic conch shell structure with inclined angles serves as the upper layer of the hybrid structure, while the biomimetic pearl shell structure with traditional brick and mud structure serves as the lower layer of the hybrid structure, forming a hybrid design structure. Four inclined angles were designed for the structural units of the conch shell, namely 15°, 30°, 45°, and 60°. Twenty-four specimens (six specimens for each inclined angle) were prepared using 3D printing technology using both soft and hard matrix materials. The influence of different inclined angles on the fracture strength, fracture toughness, and energy absorption of hybrid design structures was experimentally studied. The biomimetic hybrid design composite specimen with a notch is placed between two supporting rollers, and a loading indenter acts at mid-span. All twenty-four specimens were notched with a triangular tip and a rectangular bottom. A loading rate of 1 mm/min is used to avoid the viscoelastic effect of the composite materials. Details of the specimens, the experimental set-up and procedure are discussed in this paper. Complementary to the experimental studies, an extensive numerical investigation was carried out to study the influence of the aspect ratio of brick and mud units on the fracture initiation and failure of hybrid design structures. The causes of crack initiation and propagation, and failure modes in biomimetic hybrid design structures were postulated. These numerical findings help in reinforcing the experimental results and provide crucial information to enhance further research in this exciting area.

Bio-inspired interfacial chemistry for the fabrication of a robust and functional graphene oxide composite film

A strong and functional artificial nacre film is developed by using polyethyleneimine-functionalized GO (PEI-GO) and pyrogallol (PG) inspired by insect exoskeleton sclerotization. PEI-GO is macroscopically assembled into the laminated films and then reacted with PG under the optimized condition for their efficient cross-linking through Schiff-base reactions. The internal structure and physicochemical properties of PG-treated PEI-GO (PG@PEI-GO) films are systematically explored with various analytical tools. The optimized PG@PEI-GO films exhibit excellent tensile strength, modulus, and toughness of 216.0 ± 12.9 MPa, 17.0 ± 1.1 GPa, and 2192 ± 538.5 kJ m-3 which are 2.7, 2.8, and 2.3-fold higher than those of GO films, respectively. Furthermore, silver nanoparticles (AgNPs) are densely immobilized on the PG@PEI-GO films harnessing their abundant amine groups, and the AgNPs immobilized PG@PEI-GO films exhibit a high catalytic activity in the conversion of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with maintaining structural integrity. Based on the results, we demonstrate that the rational design of interfaces, inspired by natural materials, is an efficient approach to achieving strong and functional GO laminated composite films.

Mechanical and Viscoelastic Properties of Stacked and Grafted Graphene/Graphene Oxide-Polyethylene Nanocomposites: A Coarse-Grained Molecular Dynamics Study

High-performance natural materials with superior mechanical properties often possess a hierarchical structure across multiple length scales. Nacre, also known as the mother of pearl, is an example of such a material and exhibits remarkable strength and toughness. The layered hierarchical architecture across different length scales is responsible for the efficient toughness and energy dissipation. To develop high-performance artificial nacre-like composites, it is necessary to mimic this layered structure and understand the molecular phenomena at the interface. This study uses coarse-grained molecular dynamics simulations to investigate the structure-property relationship of stacked graphene-polyethylene (PE) nanocomposites. Uniaxial and oscillatory shear deformation simulations were conducted to explore the composites' mechanical and viscoelastic behavior. The effect of grafting on the glass-transition temperature and the mechanical and viscoelastic behavior was also examined. The two examined microstructures, the stacked and grafted GnP (graphene nanoplatelet)-PE composites, demonstrated significant enhancement in the Young's modulus and yield strength when compared to the pristine PE. The study also delves into the viscoelastic properties of polyethylene nanocomposites containing graphene and graphene oxide. The grafted composite demonstrated an increased elastic energy and improved capacity for stress transfer. Our study sheds light on the energy dissipation properties of layered nanocomposites through underlying molecular mechanisms, providing promising prospects for designing novel biomimetic polymer nanocomposites.

Creep failure of hierarchical materials

Creep failure of hierarchical materials is investigated by simulation of beam network models. Such models are idealizations of hierarchical fibrous materials where bundles of load-carrying fibers are held together by multi-level (hierarchical) cross-links. Failure of individual beams is assumed to be governed by stress-assisted thermal activation over local barriers, and beam stresses are computed by solving the global balance equations of linear and angular momentum across the network. Disorder is mimicked by a statistical distribution of barrier heights. Both initially intact samples and samples containing side notches of various length are considered. Samples with hierarchical cross-link patterns are simulated alongside reference samples where cross-links are placed randomly without hierarchical organization. The results demonstrate that hierarchical patterning may strongly increase creep strain and creep lifetime while reducing the lifetime variation. This is due to the fact that hierarchical patterning induces a failure mode that differs significantly from the standard scenario of failure by nucleation and growth of a critical crack. Characterization of this failure mode demonstrates good agreement between the present simulations and experimental findings on hierarchically patterned paper sheets.

High-Strength Organic-Inorganic Composites with Superior Thermal Insulation and Acoustic Attenuation

We demonstrate facile fabrication of highly filled, lightweight organic-inorganic composites comprising polyurethanes covalently linked with naturally occurring clinoptilolite microparticles. These polyurethane/clinoptilolite (PUC) composites are shown to mitigate particle aggregation usually observed in composites with high particle loadings and possess enhanced thermal insulation and acoustic attenuation compared with conventionally employed materials (e.g., drywall and gypsum). In addition to these functional properties, the PUC composites also possess flexural strengths and strain capacities comparable to and higher than ordinary Portland cement (OPC), respectively, while being ∼1.5× lighter than OPC. The porosity, density, and mechanical and functional properties of these composites are tuned by systematically varying their composition (diisocyanate, polyurethane, and inorganic contents) and the nature of the organic (reactivity and source of polyol) components. The fabrication process involves mild curing conditions and uses commonly available reagents (naturally occurring aluminosilicate particles, polyols, and diisocyanate), thereby making the process scalable. Finally, the composite properties are shown to be independent of the polyol source (virgin or recycled), underlining the generality of this approach for the scalable utilization of recycled polyols.

Biomimetic Use of Food-Waste Sources of Calcium Carbonate and Phosphate for Sustainable Materials-A Review

Natural and renewable sources of calcium carbonate (CaCO3), also referred to as "biogenic" sources, are being increasingly investigated, as they are generated from a number of waste sources, in particular those from the food industry. The first and obvious application of biogenic calcium carbonate is in the production of cement, where CaCO3 represents the raw material for clinker. Overtime, other more added-value applications have been developed in the filling and modification of the properties of polymer composites, or in the development of biomaterials, where it is possible to transform calcium carbonate into calcium phosphate for the substitution of natural hydroxyapatite. In the majority of cases, the biological structure that is used for obtaining calcium carbonate is reduced to a powder, in which instance the granulometry distribution and the shape of the fragments represent a factor capable of influencing the effect of addition. As a result of this consideration, a number of studies also reflect on the specific characteristics of the different sources of the calcium carbonate obtained, while also referring to the species-dependent biological self-assembly process, which can be defined as a more "biomimetic" approach. In particular, a number of case studies are investigated in more depth, more specifically those involving snail shells, clam shells, mussel shells, oyster shells, eggshells, and cuttlefish bones.

Protein-based bioactive coatings: from nanoarchitectonics to applications

Protein-based bioactive coatings have emerged as a versatile and promising strategy for enhancing the performance and biocompatibility of diverse biomedical materials and devices. Through surface modification, these coatings confer novel biofunctional attributes, rendering the material highly bioactive. Their widespread adoption across various domains in recent years underscores their importance. This review systematically elucidates the behavior of protein-based bioactive coatings in organisms and expounds on their underlying mechanisms. Furthermore, it highlights notable advancements in artificial synthesis methodologies and their functional applications in vitro. A focal point is the delineation of assembly strategies employed in crafting protein-based bioactive coatings, which provides a guide for their expansion and sustained implementation. Finally, the current trends, challenges, and future directions of protein-based bioactive coatings are discussed.

Physical Phenomena Governing Mineral Morphogenesis in Molluscan Nacre

Mollusks, as well as many other living organisms, have the ability to shape mineral crystals into unconventional morphologies and to assemble them into complex functional mineral-organic structures, an observation that inspired tremendous research efforts in scientific and technological domains. Despite these, a biochemical toolkit that accounts for the formation of the vast variety of the observed mineral morphologies cannot be identified yet. Herein, phase-field modeling of molluscan nacre formation, an intensively studied biomineralization process, is used to identify key physical parameters that govern mineral morphogenesis. Manipulating such parameters, various nacre properties ranging from the morphology of a single mineral building block to that of the entire nacreous assembly are reproduced. The results support the hypothesis that the control over mineral morphogenesis in mineralized tissues happens via regulating the physico-chemical environment, in which biomineralization occurs: the organic content manipulates the geometric and thermodynamic boundary conditions, which in turn, determine the process of growth and the form of the biomineral phase. The approach developed here has the potential of providing explicit guidelines for the morphogenetic control of synthetically formed composite materials.

Nacre-inspired composite paper of PVA crosslinked basalt scale and nanocellulose with enhanced mechanical, electrical insulating and ultraviolet-resistant aging performance

Silicate scales are commonly incorporated into cellulose nanofiber (CNF) as functional fillers to enhance electrical insulation and UV-shielding properties. Nevertheless, the addition of substantial quantities of silicate scales in the quest for enhanced functional properties results in reduced interface bonding capability and compromised mechanical properties, thereby restricting their application. Here, inspired from nacre, layered composite paper with excellent mechanical strength, electrical insulation and UV-resistance properties was fabricated through vacuum assisted self-assembly using CNF, PVA and basalt scales (BS). Unlike the conventional blending strategy, the pre-mixed PVA and BS suspension facilitates the formation of Al-O-C bond, thereby enhancing the interfacial bonding between BS and CNF. Consequently, the composite paper (BS@PVA/PVA/CNF) containing 60 wt% BS demonstrates higher mechanical strength-approximately 140 % higher than that of BS/CNF composite paper, achieving a strength of 33.5 MPa. Additionally, it demonstrates enhanced dielectric properties, surpassing those of CNF paper by up to 107 %. Moreover, it exhibits robust ultraviolet-resistant aging performance, retaining ~87 % of its tensile strength after undergoing a simulated two-year aging period. As a result, this work presents a simple and innovative design strategy for enhancing interfacial bonding and optimizing layer structure, providing essential guidelines for large-scale production of high-performance insulation and aging-resistant composite paper.

An all-natural, bioinspired, biodegradable electrical insulating composite based on lignocellulose and mica tailings

The rapid development of modern electrical engineering puts forward urgent demand for high-performance electrical insulating materials. In this study, inspired by the layered structure of natural nacre, we present a novel biomimetic composite insulating film (referred to as M/C film) that is derived from agricultural waste corncobs and industrial waste mica tailings through a sol-gel-film transformation process. The novel insulating film has excellent tensile strength (94 MPa), high dielectric strength (68 kV mm-1), low dielectric loss, good heat resistance (T0 = 235 °C), and excellent UV shielding properties. Meanwhile, the M/C film presents environmental impacts much lower than those petrochemical-based plastic film as it can be 100 % recycled in a closed-loop recycling process and easily biodegraded in the environment (lignocellulose goes back to the carbon cycle and the mica return to the geological cycle). It is a potential alternative for petrochemical plastics and provides a possible way to utilize agricultural waste and mica tailings.

The Use of Shells of Marine Molluscs in Spanish Ethnomedicine: A Historical Approach and Present and Future Perspectives

Since ancient times, the shells of marine molluscs have been used as a therapeutic and/or prophylactic resource. In Spain, they were part of practical guides for doctors or pharmacists until the 19th century. In general, seashells were prepared by dissolving in vinegar and were part of plasters or powders used as toothpaste, or to treat dyspepsia, heartburn and leprosy. Thus, the nacre or mother-of-pearl of various molluscs was regularly used in the Royal Colleges of Surgery and in hospitals during the times of the Cortes of Cadiz, as a medicine in galenic preparations based on powders. In contemporary Spanish ethnomedicine, seashells, with a high symbolic value, have been used as an amulet to prevent cracks in the breasts and promote their development during lactation, to avoid teething pain in young children, to eliminate stains on the face or to cure erysipelas. But, as in other countries, products derived from seashells have also been empirically applied. The two resources used traditionally have been the cuttlebone, the internal shell of cuttlefish and the nacre obtained from the external shells of some species. Cuttlebone, dried and pulverised, has been applied externally to cure corneal leukoma and in dental hygiene. In the case of nacre, a distinction must be made between chemical and physical remedies. Certain seashells, macerated in lemon juice, were used in coastal areas to remove spots on the face during postpartum. However, the most common practice in Spain mainland was to dissolve mother-of-pearl buttons in lemon juice (or vinegar). The substance thus obtained has been used to treat different dermatological conditions of the face (chloasma, acne), as well as to eliminate freckles. For the extraction of foreign bodies in the eyes, a very widespread traditional remedy has been to introduce small mother-of-pearl buttons under the lid. These popular remedies and practices are compared with those collected in classic works of medicine throughout history, and data on the pharmacological activity and pharmaceutical applications of the products used are provided. The use of cuttlebone powders is supported by different works on anti-inflammatory, immune-modulatory and/or wound healing properties. Nacre powder has been used in traditional medicines to treat palpitations, convulsions or epilepsy. As sedation and a tranquilisation agent, nacre is an interesting source for further drug development. Likewise, nacre is a biomaterial for orthopaedic and other tissue bioengineering applications. This article is a historical, cultural and anthropological view that can open new epistemological paths in marine-derived product research.

Bioinspired Design Rules from Highly Mineralized Natural Composites for Two-Dimensional Composite Design

Discoveries of two-dimensional (2D) materials, exemplified by the recent entry of MXene, have ushered in a new era of multifunctional materials for applications from electronics to biomedical sensors due to their superior combination of mechanical, chemical, and electrical properties. MXene, for example, can be designed for specialized applications using a plethora of element combinations and surface termination layers, making them attractive for highly optimized multifunctional composites. Although multiple critical engineering applications demand that such composites balance specialized functions with mechanical demands, the current knowledge of the mechanical performance and optimized traits necessary for such composite design is severely limited. In response to this pressing need, this paper critically reviews structure-function connections for highly mineralized 2D natural composites, such as nacre and exoskeletal of windowpane oysters, to extract fundamental bioinspired design principles that provide pathways for multifunctional 2D-based engineered systems. This paper highlights key bioinspired design features, including controlling flake geometry, enhancing interface interlocks, and utilizing polymer interphases, to address the limitations of the current design. Challenges in processing, such as flake size control and incorporating interlocking mechanisms of tablet stitching and nanotube forest, are discussed along with alternative potential solutions, such as roughened interfaces and surface waviness. Finally, this paper discusses future perspectives and opportunities, including bridging the gap between theory and practice with multiscale modeling and machine learning design approaches. Overall, this review underscores the potential of bioinspired design for engineered 2D composites while acknowledging the complexities involved and providing valuable insights for researchers and engineers in this rapidly evolving field.

Ballistic Behavior of Bioinspired Nacre-like Composites

In this paper, the ballistic performance of a multilayered composite inspired by the structural characteristics of nacre is numerically investigated using finite element (FE) simulations. Nacre is a natural composite material found in the shells of some marine mollusks, which has remarkable toughness due to its hierarchical layered structure. The bioinspired nacre-like composites investigated here were made of five wavy aluminum alloy 7075-T651 (AA7075) layers composed of ~1.1-mm thick square tablets bonded together with toughened epoxy resin. Two composite configurations with continuous layers (either wavy or flat) were also studied. The ballistic performance of the composite plates was compared to that of a bulk monolithic AA7075 plate. The ballistic impact was simulated in the 300-600 m/s range using two types of spherical projectiles, i.e., rigid and elastoplastic. The results showed that the nacre plate exhibited improved ballistic performance compared to the bulk plate and the plates with continuous layers. The structural design of the nacre plate improved the ballistic performance by producing a more ductile failure and enabling localized energy absorption via the plastic deformation of the tablets and the globalized energy dissipation due to interface debonding and friction. All the plate configurations exhibited a better ballistic performance when impacted by an elastoplastic projectile compared to a rigid one, which is explained by the projectile plastic deformation absorbing some of the impact energy and the enlarged contact area between the projectile and the plates producing more energy absorption by the plates.

Novel Bone Void Filling Cement Compositions Based on Shell Nacre and Siloxane Methacrylate Resin: Development and Characterization

Shell nacre from Pinctada species has been extensively researched for managing bone defects. However, there is a gap in the research regarding using shell nacre powder as a cement with improved biological and physicochemical properties. To address this, bone void filling cement was formulated by incorporating shell nacre powder and an organically modified ceramic resin (ormocer). The shell nacre powder was specifically processed from the shells of Pinctada fucata and analysed using thermogravimetric analysis (TGA), X-ray diffraction spectroscopy, Fourier transform infrared (FTIR), and Raman spectroscopy, confirming the presence of organic constituents and inorganic aragonite. Trace element analysis confirmed the eligibility of shell nacre powder for biomedical applications. Next, the ormocer SNLSM2 was synthesized through a modified sol-gel method. FTIR, Raman, TGA, and transmission electron microscopy studies revealed the presence of a ladder-structured siloxane backbone and methacrylate side chain. To develop chemical curable composite shell nacre cement (SNC), different amounts of shell nacre (24%, 48%, and 72%) were added to the SNLSM2 resin, and the impact on the physicochemical properties of the cement was studied. Among the compositions, SNC 72 exhibited significantly lower linear polymerization shrinkage (0.4%) and higher compressive (>100 MPa) and flexural strength (>35 MPa). SNC 72 was radiopaque, and the exotherm generated during the cement curing was minimal. Cytotoxicity studies with L929 cells revealed the non-cytotoxic nature of the cement. Overall, the findings of this study prove that the shell nacre cement is a promising candidate for managing bone voids.

Bioinspired Additive Manufacturing of Hierarchical Materials: From Biostructures to Functions

Throughout billions of years, biological systems have evolved sophisticated, multiscale hierarchical structures to adapt to changing environments. Biomaterials are synthesized under mild conditions through a bottom-up self-assembly process, utilizing substances from the surrounding environment, and meanwhile are regulated by genes and proteins. Additive manufacturing, which mimics this natural process, provides a promising approach to developing new materials with advantageous properties similar to natural biological materials. This review presents an overview of natural biomaterials, emphasizing their chemical and structural compositions at various scales, from the nanoscale to the macroscale, and the key mechanisms underlying their properties. Additionally, this review describes the designs, preparations, and applications of bioinspired multifunctional materials produced through additive manufacturing at different scales, including nano, micro, micro-macro, and macro levels. The review highlights the potential of bioinspired additive manufacturing to develop new functional materials and insights into future directions and prospects in this field. By summarizing the characteristics of natural biomaterials and their synthetic counterparts, this review inspires the development of new materials that can be utilized in various applications.

3D-Printed Biomimetic Hierarchical Nacre Architecture: Fracture Behavior and Analysis

Nacreous architecture has a good combination of toughness and modulus, which can be mimicked at the micron to submicron level using 3D printing to resolve the demand in numerous applications such as automobile, aerospace, and protection equipment. The present study examines the fabrication of two nacre structures, a nacre columnar (NC) and a nacre sheet (NS), and a pristine structure via fused deposition modeling (FDM) and explores their mechanically superior stacking structure, mechanism of failure, crack propagation, and energy dissipation. The examination reveals that the nacre structure has significant mechanical properties compared to a neat sample. Additionally, NS has 112.098 J/m impact resistance (9.37% improvement), 803.415 MPa elastic modulus (11.23% improvement), and 1563 MPa flexural modulus (10.85% improvement), which are all higher than those of the NC arrangement.

Numerical Investigation on the Ballistic Performance of Semi-Cylindrical Nacre-like Composite Shells under High-Velocity Impact

The nacre has excellent impact resistance performance, and it is attracting attention in the field of aerospace composite research. Inspired by the layered structure from nacre, semi-cylindrical nacre-like composite shells of brittle silicon carbide ceramic (SiC) and aluminum (AA5083-H116) were established. Two types of tablet arrangements (regular hexagonal and Voronoi polygons) of the composites were designed, and the same size of ceramic and aluminum shell were established for the impact resistance analyzed numerically. In order to better compare the resistance performance of the four types of structures under different impact velocity, the following parameters were analyzed including energy variation, damage characteristic, bullet residual velocity, and semi-cylindrical shell displacement. The results show that the semi-cylindrical ceramic shells have higher rigidity and ballistic limit, but the severe vibration after impact causes penetrating cracks, and the whole structure failure occurred eventually. The nacre-like composites have higher ballistic limits than semi-cylindrical aluminum shells, and the impact of bullets only causes local failure. In the same conditions, the impact resistance of regular hexagons is better than Voronoi polygons. The research analyzes the resistance characteristic of nacre-like composites and single materials, and provides a reference for the design of nacre-like structures.

Advanced Composites Inspired by Biological Structures and Functions in Nature: Architecture Design, Strengthening Mechanisms, and Mechanical-Functional Responses

The natural design and coupling of biological structures are the root of realizing the high strength, toughness, and unique functional properties of biomaterials. Advanced architecture design is applied to many materials, including metal materials, inorganic nonmetallic materials, polymer materials, and so on. To improve the performance of advanced materials, the designed architecture can be enhanced by bionics of biological structure, optimization of structural parameters, and coupling of multiple types of structures. Herein, the progress of structural materials is reviewed, the strengthening mechanisms of different types of structures are highlighted, and the impact of architecture design on the performance of advanced materials is discussed. Architecture design can improve the properties of materials at the micro level, such as mechanical, electrical, and thermal conductivity. The synergistic effect of structure makes traditional materials move toward advanced functional materials, thus enriching the macroproperties of materials. Finally, the challenges and opportunities of structural innovation of advanced materials in improving material properties are discussed.

Influence of water and protein content on the creep behavior in dental enamel

The creep behavior of untreated and deproteinized dental enamel in dry and wet state was analyzed by nanoindentation with a spherical tip. Additionally, the influence of the loading rate was investigated. Dry untreated and deproteinized dental enamel only showed minor creep over 100 s and deproteinization did not affect the dry enamel's behavior significantly. With slower loading rates some creep already occurs during the loading period, such that the creep displacement during load hold is less than with faster loading rates. Wet untreated and deproteinized enamel showed significantly more creep compared to the dry samples. The differences between the untreated and deproteinized enamel were only minor but significant, revealing that water affects the creep behavior of biological materials such as enamel significantly. The proposed deformation mechanism of naturally porous enamel under compression is compaction of the HAP crystallites and fluid displacement within material underneath the indented area. STATEMENT OF SIGNIFICANCE: This study investigates the creep behavior of untreated and deproteinized dental enamel in dry and wet conditions. It is shown that while the protein content does not affect enamel's behavior significantly, the wet conditions lead to an increased creep in enamel. The proposed deformation mechanism of naturally porous enamel under compression is compaction of the HAP crystallites and fluid displacement within material underneath the indented area. Based on this observation a simple analytical model has been developed, aiming to deepen our understanding of the deformation behavior of biological materials.

Failure progression and toughening mechanism of 3D-printed nacre-like structures under in-plane compression

Nacre (also called mother-of-pearl) is known to have a delicate balance of stiffness, strength, and toughness, which originates from its 'brick-and-mortar' structure. In this study, nacre-like structures are fabricated using a high-resolution, multi-material 3D printer, where two different polyurethane acrylates (one that is hard and another that is soft) are used to represent the tablets and matrix. Six nacre-like structures are designed and fabricated to explore the influence of geometric parameters on the mechanical behaviors. Quasi-static in-plane compression tests and simulations are carried out to explore the failure mechanism of the nacre-like structures. The results show that the quasi-static compression responses of nacre-like structures have four stages: elastic, plateau, fragmentation, and densification. It is found that tuning the nacre architecture can optimize the mechanical performance of the specimen, including the peak load, ductility and stress reduction behavior et al. As the results of the numerical model show good agreement with the stress-strain response observed in the experiments, the model is applied to further investigate the strain distributions of the nacre-like structures. The patterns of the strain distribution suggest that synergistic deformation is the key toughening mechanism for the nacre-like structures.

Self-assembled fatty acid crystalline coatings display superhydrophobic antimicrobial properties

Superhydrophobicity is a well-known wetting phenomenon found in numerous plants and insects. It is achieved by the combination of the surface's chemical properties and its surface roughness. Inspired by nature, numerous synthetic superhydrophobic surfaces have been developed for various applications. Designated surface coating is one of the fabrication routes to achieve the superhydrophobicity. Yet, many of these coatings, such as fluorine-based formulations, may pose severe health and environmental risks, limiting their applicability. Herein, we present a new family of superhydrophobic coatings comprised of natural saturated fatty acids, which are not only a part of our daily diet, but can be produced from renewable feedstock, providing a safe and sustainable alternative to the existing state-of-the-art. These crystalline coatings are readily fabricated via single-step deposition routes, namely thermal deposition or spray-coating. The fatty acids self-assemble into highly hierarchical crystalline structures exhibiting a water contact angle of ∼165° and contact angle hysteresis lower than 6°, while their properties and morphology depend on the specific fatty acid used as well as on the deposition technique. Moreover, the fatty acid coatings demonstrate excellent thermal stability. Importantly, this new family of coatings displays excellent anti-biofouling and antimicrobial properties against Escherichia coli and Listeria innocua, used as relevant model Gram-negative and Gram-positive bacteria, respectively. These multifunctional coatings hold immense potential for application in numerous fields, ranging from food safety to biomedicine, offering sustainable and safe solutions.

Fabrication of Multilayered Biofunctional Material with an Enamel-like Structure

The oral cavity is an environment with diverse bacteria; thus, antibacterial materials are crucial for treating and preventing dental diseases. There is a high demand for materials with an enamel-like architecture because of the high failure rate of dental restorations, due to the physical differences between dental materials and enamel. However, recreating the distinctive apatite composition and hierarchical architecture of enamel is challenging. The aim of this study was to synthesize a novel material with an enamel-like structure and antibacterial ability. We established a non-cell biomimetic method of evaporation-based bottom-up self-assembly combined with a layer-by-layer technique and introduced an antibacterial agent (graphene oxide) to fabricate a biofunctional material with an enamel-like architecture and antibacterial ability. Specifically, enamel-like graphene oxide-hydroxyapatite crystals, formed on a customized mineralization template, were assembled into an enamel-like prismatic structure with a highly organized orientation preferentially along the c-axis through evaporation-based bottom-up self-assembly. With the aid of layer-by-layer absorption, we then fabricated a bulk macroscopic multilayered biofunctional material with a hierarchical enamel-like architecture. This enamel-inspired biomaterial could effectively resolve the problem in dental restoration and brings new prospects for the synthesis of other enamel-inspired biomaterials.

CaCO3 Crystals with Unique Morphologies Controlled by the Hydrogen-Bonded Supramolecular Assemblies of Ureido-Pyrimidinone-Amino Acid Derivatives

Biomineral materials such as nacre of shells exhibit high mechanical strength and toughness on account of their unique "brick-mortar" multilayer structure. 2-Ureido-4[1H]-pyrimidinone (UPy) derivatives with different types of end groups, due to the self-complementary quadruple hydrogen bonds and abundant Ca²⁺ binding sites, can easily self-assemble into supramolecular aggregates and act as templates and skeleton in the process of inducing mineral crystallization. In this work, UPy derivatives were used as templates to induce the mineralization and growth of CaCO₃ through a CO₂ diffusion method. The morphology of CaCO₃ crystals was modulated and analyzed by adjusting the synthesizing parameters including Ca²⁺ concentration, pH, and end groups. The results showed that, by the regulatory role of the mineralization template, it was easier to realize the multilayer crystal structure at a lower concentration of Ca²⁺ (less than 0.01 mol L^-1). Under alkaline regulation, the quadruple hydrogen bonds would be destroyed, and the template's regulation effect on the morphology of CaCO₃ crystals would be weakened. Moreover, by comparing different types of end groups, it was proven that the UPy derivatives with carboxylic acid groups (-COOH) played a crucial role in the process of CaCO₃ crystallization with unique morphologies.

Organic Matrix and Secondary Metabolites in Nacre

Nacre, also called mother-of-pearl, is a naturally occurring biomineral, largely studied by chemists, structural biologists, and physicists to understand its outstanding and diverse properties. Nacre is constituted of aragonite nanograins surrounded by organic matrix, and it has been established that the organic matrix is responsible for initiating and guiding the biomineralization process. The first challenge to study the organic matrix of nacre lays in its separation from the biomineral. Several extraction methods have been developed so far. They are categorized as either strong (e.g., decalcification) or soft (e.g., water, ethanol) and they allow specific extractions of targeted compounds. The structure of the nacreous organic matrix is complex, and it provides interesting clues to describe the mineralization process. Proteins, sugars, lipids, peptides, and other molecules have been identified and their role in mineralization investigated. Moreover, the organic matrix of nacre has shown interesting properties for human health. Several studies are investigating its activity on bone mineralization and its properties for skin care. In this review, we focus on the organic constituents, as lipids, sugars, and small metabolites which are less studied since present in small quantities.

Tensile and Viscoelastic Behavior in Nacre-Inspired Nanocomposites: A Coarse-Grained Molecular Dynamics Study

Organisms hold an extraordinarily evolutionary advantage in forming complex, hierarchical structures across different length scales that exhibit superior mechanical properties. Mimicking these structures for synthesizing high-performance materials has long held a fascination and has seen rapid growth in the recent past thanks to high-resolution microscopy, design, synthesis, and testing methodologies. Among the class of natural materials, nacre, found in mollusk shells, exhibits remarkably high mechanical strength and toughness. The highly organized "brick and mortar" structure at different length scales is a basis for excellent mechanical properties and the capability to dissipate energy and propagation in nacre. Here, we employ large-scale atomistic coarse-grained molecular dynamics simulations to study the mechanical and viscoelastic behavior of nacre-like microstructures. Uniaxial tension and oscillatory shear simulations were performed to gain insight into the role of complex structure-property relationships. Specifically, the role played by the effect of microstructure (arrangement of the crystalline domain) and polymer-crystal interactions on the mechanical and viscoelastic behavior is elucidated. The tensile property of the nanocomposite was seen to be sensitive to the microstructure, with a staggered arrangement of the crystalline tablets giving rise to a 20-30% higher modulus and lower tensile strength compared to a columnar arrangement. Importantly, the staggered microstructure is shown to have a highly tunable mechanical behavior with respect to the polymer-crystal interactions. The underlying reasons for the mechanical behavior are explained by showing the effect of polymer chain mobility and orientation and the load-carrying capacity for the constituents. Viscoelastic responses in terms of the storage and loss moduli and loss tangent are studied over three decades in frequency and again highlight the differences brought about by the microstructure. We show that our coarse-grained models offer promising insights into the design of novel biomimetic structures for structural applications.

Investigation of Bioinspired Nacreous Structure on Strength and Toughness

The toughening mechanism of the nacre was widely investigated in recent decades, which presents a great prospect for designing high performance composite materials and engineering structures with bioinspired structures. To further elucidate which structural parameters and which kinds of morphology of the nacre-inspired structure are the best for improving tensile strength without sacrificing too much toughness is extremely significant for composite materials and engineering structures. The “brick-and-mortar” structure is a classical nacre-inspired bionic structure. Three characteristic structural parameters, including the aspect ratio ρ of the brick length and width, the thickness ratio β between the thickness of brick and mortar, and the spacing ratio τ between the width of brick and mortar, were used as variables to study their effect on tensile strength and toughness. It was found that ρ was the most prominent factor in determining the strength and toughness, and τ could improve the strength and toughness almost simultaneously. Racked and wedged morphology of the structural unit were established based on the structural parameters of the regular staggered unit, and were used to compare tensile behavior. It was found that the model with the wedged unit possessed the highest strength and toughness, and could absorb more strain energy during fracture crack growing. The crack propagation path further illustrated that the crack resisting ability of the wedged unit was the best. Our simulation results presented the connection between three characteristic structural parameters with the strength and toughness, and proved that the wedged staggered unit was the best in improving the strength and toughness.

Interfacial Mechanical Behavior in Nacre of Red Abalone and Other Shells: A Review

Interfaces between nacreous tablets are crucial to the outstanding mechanical properties of nacre in natural shells. Excellent research has been conducted to probe the effect of interfaces on strength and toughness of nacre, providing critical guidelines for the design of human-made laminated composites. This article reviews recent studies on interfacial mechanical behavior of nacre in red abalone and other shells, including experimental methods, analytical and numerical modeling. The discussions focus on the mechanical properties of dry and hydrated nacreous microstructures. The review concludes with discussions on representative studies of nacre-like composites with interfaces tuned using multiple approaches, and provides an outlook on improving the performance of composites with better interfacial controls.

Determining Mechanical Moduli of Disordered Materials with Hierarchical Porosity on Different Structural Levels

The impact of synthesis parameters and structural properties, respectively, on mechanical properties of porous materials on different structural levels provides valuable information for designing materials for specific applications. Within this study, we apply two nonstandard approaches for determining the mechanical properties of the mesoporous backbone phase in a series of disordered SiO₂-based monolithic materials possessing hierarchical meso-macroporosity, that is, deformation upon mercury porosimetry and in situ dilatometry during nitrogen adsorption analysis. By using ordered porous model materials, the latter method has been recently proven to provide reliable mechanical moduli. This concept was now applied to a SiO₂ monolith developed for high-performance liquid chromatography exhibiting disordered hierarchical meso- and macroporosity, as well as a series of analogue phenyl-modified meso-macroporous SiO₂ monoliths with up to 36.1 at% organic modification. The phenyl group was introduced by adding phenyltrimethoxysilane to the sol-gel mixture. The study aimed at investigating in detail the impact of the organic modification on the morphology of the porous solid and the resulting mechanical properties. The study shows that both Hg porosimetry and in situ dilatometry performed during N₂ adsorption at 77 K provide similar and reasonable moduli of compression for the mesoporous backbone of the silica materials investigated. These data were compared with moduli of the macroscopic sample as determined from sound velocity measurements by describing the fully connected macroporous backbone with a foam model. The comparison reveals an otherwise overseen side effect of the organic modification of the silica framework: in contrast to the pure reference SiO₂ meso-macroporous monoliths, the hybrid material is composed of a more particulate morphology on the mesoscale, that is, mesoporous particles and corresponding necks between them are formed, which results in significant softening of the porous solid on the macroscale.

Bioinspired Design of High Vibration-Damping Supramolecular Elastomers Based on Multiple Energy-Dissipation Mechanisms

Suppressing vibrations and noises is essential for our automated society. Here, inspired by the hierarchical dynamic bonds and phase separation of mussel byssal threads, we synthesize high-damping supramolecular elastomers (HDEs) via simple one-pot radical polymerization of butyl acrylate (BA), acrylic acid (AA), and vinylimidazole (VI). Interestingly, AA and VI not only form hydrogen bonds and ionic bonds simultaneously but also segregate into aggregates of different sizes, thereby successfully mimicking the hierarchical structure of mussel byssal threads. When applying external forces, the weak hydrogen bonds are broken at first and then the ionic bonds and aggregates are disrupted progressively from small to large deformations. Such multiple energy-dissipation mechanisms lead to the outstanding damping property of the HDEs. Therefore, the HDEs outperform commercially available rubbers in terms of sound absorption and vibration damping. Furthermore, the multiple energy-dissipation mechanisms impart the HDEs with high toughness (41.1 MJ/m³), tensile strength (21.3 MPa), and self-healing ability.

Strong and Tough Nacre-Inspired Graphene Oxide Composite with Hierarchically Similar Structure

We report a graphene oxide (GO)-based composite, featuring GO/cross-linking agent (CA) nanoparticles, inspired by a nacre-like hierarchical structure present in nature. The as-prepared GO/CA composite was powdered to nanoscale particles and then mixed with pure GO to be GO/CA/GO (GCG) composite forming hierarchical GO/CA nanoasperities on the GO surface. The strength and toughness of the nacre-inspired GCG composite films were simultaneously improved by adjusting the nanoparticle concentration and hierarchical level of the GO-based films. Compared to pristine GO films and GO/CA composites, which exhibit a low level of hierarchy in their structures, the tensile strength and toughness of the GCG composites with higher hierarchy were enhanced 3.1 and 1.6 times and 47.6 and 10.9 times, respectively. Furthermore, a plausible mechanism of increasing mechanical properties based on nanoscale asperities and homogeneous interactions between GO and CA has been discussed.

Bioinspired Nanoheterogeneous Alternating Multiarched Architecture: Toward a Superior Strength-Toughness Integration

Strength and toughness are at odds with each other in coating design. Constructing strength-toughness-integrated coatings has long been a pursuit in materials design but is a challenge to achieve. Conventional wisdom suggests that growth of coatings is only a uniform cumulative growth on a two-dimensional plane. However, by constructing growth templates and controlling the alternation of heterogeneous materials, it subverts the traditional perception of cumulative growth in planes and creates the fact that the coating grows on a curved surface. Regulating the microstructure of the coating autonomously and matching the strength and toughness of heterogeneous materials, drawing inspiration from the multiarched structure in the nacre of red abalone, are crucial for achieving strength-toughness integration. Herein, we propose a new idea of coating deposition to achieve strength-toughness integration via preconstructing a nanoscale island-like discontinuous seed layer as a template for coating growth and then growing a nanoscale hard/soft heterogeneous multiarched architecture in situ. We refer to this architecture with intrinsic mechanical advantage as the "Nanoheterogeneous Alternating Multiarched" (NHAM) architecture. We design a nacre-like multiarched coating with a strength of 12.42 GPa and a K_IC value of 2.12 MPa·m^1/2, depositing the hard phase (TiSiCN layer) and the soft phase (Ag layer) with the unique NHAM architecture via physical vapor deposition technology, which exhibits a superior improvement in the strength-toughness integration compared to that reported in other studies (increased strength by at least 1 GPa without sacrificing toughness). The NHAM architecture strategy provides a pathway to design strength-toughness-integrated coatings. Two heterogeneous materials with well-matched strength and toughness can be deposited to achieve the NHAM architecture to greatly reflect the effect of strength-toughness integration.

Nanochitin: Chemistry, Structure, Assembly, and Applications

Chitin, a fascinating biopolymer found in living organisms, fulfills current demands of availability, sustainability, biocompatibility, biodegradability, functionality, and renewability. A feature of chitin is its ability to structure into hierarchical assemblies, spanning the nano- and macroscales, imparting toughness and resistance (chemical, biological, among others) to multicomponent materials as well as adding adaptability, tunability, and versatility. Retaining the inherent structural characteristics of chitin and its colloidal features in dispersed media has been central to its use, considering it as a building block for the construction of emerging materials. Top-down chitin designs have been reported and differentiate from the traditional molecular-level, bottom-up synthesis and assembly for material development. Such topics are the focus of this Review, which also covers the origins and biological characteristics of chitin and their influence on the morphological and physical-chemical properties. We discuss recent achievements in the isolation, deconstruction, and fractionation of chitin nanostructures of varying axial aspects (nanofibrils and nanorods) along with methods for their modification and assembly into functional materials. We highlight the role of nanochitin in its native architecture and as a component of materials subjected to multiscale interactions, leading to highly dynamic and functional structures. We introduce the most recent advances in the applications of nanochitin-derived materials and industrialization efforts, following green manufacturing principles. Finally, we offer a critical perspective about the adoption of nanochitin in the context of advanced, sustainable materials.

Simulation Analysis of Organic–Inorganic Interface Failure of Scallop under Ultra-High Pressure

Shell is a typical biomineralized inorganic–organic composite material. The essence of scallop deshelling is caused by the fracture failure at the interface of the organic and inorganic–organic matter composites. The constitutive equations were solved so that the stress distributions of the adductor in the radial, circumferential, and axial directions were obtained as σr = σθ = P, σz = 2(2 − ν)P/(2ν − 1), and the shear stress was τzr = 0. Using the method of finite element simulation analysis, the stress distribution laws at different interface states were obtained. The experimental results show that when the amplitude is constant, the undulation period is smaller than the diameter of the adductor or the angle between the bus of the adductor, and the reference horizontal plane gradually decreases, so the interface is more likely to yield. After the analysis, the maximum stress for the yielding of the scallop interface was about 247 MPa, and the whole deshelling process was gradually spread from the outer edge of the interface to the center. The study analyzed the scallop organic–inorganic material interface from the perspective of mechanics, and the mechanical model and simulation analysis results were consistent with the parameter optimization results, which can provide some theoretical basis for the composite material interface failure and in-depth research.

Organizing Nanoparticles in Semicrystalline Polymers by Modifying Particle Diffusivity

We have previously shown that semicrystalline polymers can be reinforced by adding nanoparticles (NPs) and then ordering them into specific motifs using the crystallization process. A key result we have found is that when the spherulite growth rate is slowed below a critical value, then, NPs can order into the amorphous interlamellar regions of the semicrystalline structure. The effects of spherulite growth rate in this context have previously been examined, and here we focus on the role of NP diffusivity. We achieve this goal by changing the poly(ethylene oxide) (PEO) molecular weight as a route to altering the matrix viscosity. In particular, four molecular weights of PEO were employed ranging from 5.4-46 kDa. Each sample was loaded with 10 vol % of bare 14 nm diameter silica NPs. After initially studying spherulite growth rates, experiments were designed to fix the spherulite growth rate across sample molecular weights to study particle ordering, induced by polymer crystallization. We find that, at the fastest growth rate studied (12 μm/s), the lowest molecular weight sample showed the highest order, presumably due to enhanced particle mobility. However, as the spherulite growth rate is slowed, the maximum ordering behavior is observed at intermediate molecular weights. The trend observed at slow growth rates is explained by the large-scale segregation of NPs (presumably into the grain boundaries, i.e., the interspherulitic regions); evidence for this is the observed transition of spherulite growth to diffusion-control at slow growth rates in the lowest molecular weight PEO sample studied.

Experimental approaches to assess the effect of composition of abrasives in the cause of dental microwear

Dental microwear is used to investigate feeding ecology. Animals ingest geological material in addition to food. The full effect of geological abrasives on tooth wear is unknown. To evaluate mineralogical abrasives as tooth wear agents, rats were fed food manufactured with quartz silt, diatomaceous earth, and calcium carbonate. Rats were assigned to treatments and fed for 15 days. Molars were scanned with a Sensofar Plu Neox confocal microscope and evaluated using ISO-25178-2 parameters and traditional microwear variables using light microscopy. Using a pellet-diet as the control, all treatments had influence on microwear and discriminant function analyses indicated that unique surface textures had been produced. ISO variables with high discriminatory values were correlated to scratch and pit frequencies, but more ISO parameters identified changes associated with numbers of scratches than changes associated with pits. The microwear changes associated with the abrasive inclusions were co-dependent on the type of diet that the abrasives had been added to. The abrasives had less effect with pellets but produced more modified and more differentiated microwear when added to the transgenic dough. Although abrasives produce distinctive surface textures, some knowledge of the properties of food with the abrasives is needed to identify the abrasive agent.

Bioinspired nacre-like PEEK material with superior tensile strength and impact toughness

A bioinspired PEEK material with hard “bricks” of nanoscale lamellae and micron-scale deformed spherulites bonded by soft “mortar” of a rigid amorphous fraction was produced with a pressure-induced flow (PIF) processing applied in the solid-state. Novel mechanisms were proposed for the marked and simultaneous improvement in the strength and toughness, where the tensile strength and impact strength could be increased to ∼200% and ∼450%, respectively. On one hand, the rotation, recombination and restacking of the crystalline blocks formed an oriented and stratified morphology similar to the “brick-and-mortar” structure in nacre, and resulted in the confined crack propagations and the tortuous energy dissipating paths. On the other hand, the PIF-relaxation due to the newly generated rigid amorphous fraction further contributed to the improvement of the impact strength. The efficiency of enhancement could be controlled by the molding temperature, the compression ratio, and the volume fraction of chopped carbon fiber. As a result, PIF-processing might endow the PEEK material with improved mechanical matching with the surrounding tissues and extended service life in biomedical applications while retaining excellent biocompatibility with no external substances introduced.

A bioinspired PEEK material with hard “bricks” of nanoscale lamellae and micron-scale deformed spherulites bonded by soft “mortar” of a rigid amorphous fraction was produced with a pressure-induced flow (PIF) processing applied in the solid-state.

Multiscale mechanical consequences of ocean acidification for cold-water corals

Ocean acidification is a threat to deep-sea corals and could lead to dramatic and rapid loss of the reef framework habitat they build. Weakening of structurally critical parts of the coral reef framework can lead to physical habitat collapse on an ecosystem scale, reducing the potential for biodiversity support. The mechanism underpinning crumbling and collapse of corals can be described via a combination of laboratory-scale experiments and mathematical and computational models. We synthesise data from electron back-scatter diffraction, micro-computed tomography, and micromechanical experiments, supplemented by molecular dynamics and continuum micromechanics simulations to predict failure of coral structures under increasing porosity and dissolution. Results reveal remarkable mechanical properties of the building material of cold-water coral skeletons of 462 MPa compressive strength and 45-67 GPa stiffness. This is 10 times stronger than concrete, twice as strong as ultrahigh performance fibre reinforced concrete, or nacre. Contrary to what would be expected, CWCs retain the strength of their skeletal building material despite a loss of its stiffness even when synthesised under future oceanic conditions. As this is on the material length-scale, it is independent of increasing porosity from exposure to corrosive water or bioerosion. Our models then illustrate how small increases in porosity lead to significantly increased risk of crumbling coral habitat. This new understanding, combined with projections of how seawater chemistry will change over the coming decades, will help support future conservation and management efforts of these vulnerable marine ecosystems by identifying which ecosystems are at risk and when they will be at risk, allowing assessment of the impact upon associated biodiversity.

Biomineralized Materials as Model Systems for Structural Composites: 3D Architecture

Biomineralized materials are sophisticated material systems with hierarchical 3D material architectures, which are broadly used as model systems for fundamental mechanical, materials science, and biomimetic studies. The current knowledge of the structure of biological materials is mainly based on 2D imaging, which often impedes comprehensive and accurate understanding of the materials' intricate 3D microstructure and consequently their mechanics, functions, and bioinspired designs. The development of 3D techniques such as tomography, additive manufacturing, and 4D testing has opened pathways to study biological materials fully in 3D. This review discusses how applying 3D techniques can provide new insights into biomineralized materials that are either well known or possess complex microstructures that are challenging to understand in the 2D framework. The diverse structures of biomineralized materials are characterized based on four universal structural motifs. Nacre is selected as an example to demonstrate how the progression of knowledge from 2D to 3D can bring substantial improvements to understanding the growth mechanism, biomechanics, and bioinspired designs. State-of-the-art multiscale 3D tomographic techniques are discussed with a focus on their integration with 3D geometric quantification, 4D in situ experiments, and multiscale modeling. Outlook is given on the emerging approaches to investigate the synthesis-structure-function-biomimetics relationship.

Biomineralized Materials as Model Systems for Structural Composites: Intracrystalline Structural Features and Their Strengthening and Toughening Mechanisms

Biomineralized composites, which are usually composed of microscopic mineral building blocks organized in 3D intercrystalline organic matrices, have evolved unique structural designs to fulfill mechanical and other biological functionalities. While it has been well recognized that the intricate architectural designs of biomineralized composites contribute to their remarkable mechanical performance, the structural features within and corresponding mechanical properties of individual mineral building blocks are often less appreciated in the context of bio-inspired structural composites. The mineral building blocks in biomineralized composites exhibit a variety of salient intracrystalline structural features, such as, organic inclusions, inorganic impurities (or trace elements), crystalline features (e.g., amorphous phases, single crystals, splitting crystals, polycrystals, and nanograins), residual stress/strain, and twinning, which significantly modify the mechanical properties of biogenic minerals. In this review, recent progress in elucidating the intracrystalline structural features of three most common biomineral systems (calcite, aragonite, and hydroxyapatite) and their corresponding mechanical significance are discussed. Future research directions and corresponding challenges are proposed and discussed, such as the advanced structural characterizations and formation mechanisms of intracrystalline structures in biominerals, amorphous biominerals, and bio-inspired synthesis.

The Interplay of Polymer Bridging and Entanglement in Toughening Polymer-Infiltrated Nanoparticle Films

Polymer-nanoparticle composite films (PNCFs) with high loadings of nanoparticles (NPs) (>50 vol %) have applications in multiple areas, and an understanding of their mechanical properties is essential for their broader use. The high-volume fraction and small size of the NPs lead to physical confinement of the polymers that can drastically change the properties of polymers relative to the bulk. We investigate the fracture behavior of a class of highly loaded PNCFs prepared by polymer infiltration into NP packings. These polymer-infiltrated nanoparticle films (PINFs) have applications as multifunctional coatings and membranes and provide a platform to understand the behavior of polymers that are highly confined. Here, the extent of confinement in PINFs is tuned from 0.1 to 44 and the fracture toughness of PINFs is increased by up to a factor of 12 by varying the molecular weight of the polymers over 3 orders of magnitude and using NPs with diameters ranging from 9 to 100 nm. The results show that brittle, low molecular weight (MW) polymers can significantly toughen NP packings, and this toughening effect becomes less pronounced with increasing NP size. In contrast, high MW polymers capable of forming interchain entanglements are more effective in toughening large NP packings. We propose that confinement has competing effects of polymer bridging increasing toughness and chain disentanglement decreasing toughness. These findings provide insight into the fracture behavior of confined polymers and will guide the development of mechanically robust PINFs as well as other highly loaded PNCFs.

Mechanochromic elastomers with different thermo- and mechano-responsive radical-type mechanophores

To design tough soft materials, the introduction of sacrificial bonds into their skeleton is a useful method. The introduction of radical-type mechanophores (RMs), which generate coloured radicals in response to mechanical stimuli, as sacrificial bonds into the cross-linking points of elastomers is expected to be a powerful tool to elucidate the fracture mechanisms as well as the toughening of materials, given that the radicals generated from the RMs are coloured and can be quantitatively evaluated using electron paramagnetic resonance (EPR) measurements. In this study, to investigate the effect of the dynamic nature, i.e., the reactivity, of RMs introduced at the cross-linking points of polymer networks on their macroscopic mechanical properties, polymer networks cross-linked by two different RMs, a symmetric radical-type mechanophore (DFSN) and a non-symmetric radical-type mechanophore (CF/ABF), were synthesized and characterized. Compared to the polymer network cross-linked by DFSN, the network with CF/ABF exhibited higher thermal and mechanical responses, in other words much more sensitive to heat and mechanical force, resulting in better stress relaxation and energy-dissipation properties. These results demonstrate that the reactivity of the radical mechanophore at the cross-linking point is an important factor for designing polymer networks.

Insights on Shear Transfer Efficiency in "Brick-and-Mortar" Composites Made of 2D Carbon Nanoparticles

Achieving high mechanical performances in nanocomposites reinforced with lamellar fillers has been a great challenge in the last decade. Many efforts have been made to fabricate synthetic materials whose properties resemble those of the reinforcement. To achieve this, special architectures have been considered mimicking existing materials, such as nacre. However, achieving the desired performances is challenging since the mechanical response of the material is influenced by many factors, such as the filler content, the matrix molecular mobility and the compatibility between the two phases. Most importantly, the properties of a macroscopic bulk material strongly depend on the interaction at atomic levels and on their synergetic effect. In particular, the formation of highly-ordered brick-and-mortar structures depends on the interaction forces between the two phases. Consequently, poor mechanical performances of the material are associated with interface issues and low stress transfer from the matrix to the nanoparticles. Therefore, improvement of the interface at the chemical level enhances the mechanical response of the material. The purpose of this review is to give insight into the stress transfer mechanism in high filler content composites reinforced with 2D carbon nanoparticles and to describe the parameters that influence the efficiency of stress transfer and the strategies to improve it.

Distinctive Impact of Heat Treatment on the Mechanical Behavior of Nacreous and Crossed-Lamellar Structures in Biological Shells: Critical Role of Organic Matrix

As biological ceramic composites, mollusk shells exhibit an excellent strength-toughness combination that should be dependent on aragonite/organic matrix interfaces. The mechanical properties and fracture mechanisms of the nacreous structure in the Cristaria plicata (C. plicata) shell and crossed-lamellar structures in the Cymbiola nobilis (C. nobilis) shell were investigated, focusing on the critical role of the organic matrix/aragonite interface bonding that can be adjusted by heat treatments. It is found that heat treatments have a negative impact on the fracture behavior of the nacreous structure in the C. plicata shell, and both the bending and shear properties decrease with increasing heat-treatment temperature because of the loss of water and organic matrix. In contrast, for the crossed-lamellar structure in C. nobilis shell, the water loss in heat treatment slightly decreases its bending properties. When the organic matrix is melted after an appropriate heat treatment at 300°C for 15 min, its bending properties can be greatly enhanced; in this case, remarkable toughening mechanisms involving crack deflection and the fiber pull-out are exhibited, although the interfacial bonding strength reduces. Therefore, an appropriate heat treatment would bring about a positive impact on the fracture behavior of crossed-lamellar structure in the C. nobilis shell. The major research findings have provided an important inspiration that the inducement of moderately weak interfaces rather than all strong interfaces might enhance the comprehensive mechanical properties of fiber-reinforced ceramic composites.