An Insight into the Molecular Electronic Structure of Graphene Oxides and Their Interactions with Molecules of Different Polarities Using Quantum Chemical and COSMO-RS Calculations

A systematic theoretical study on the molecular electronic structure of graphene and its oxides, including their interactions with molecular species of different polarity, was carried out. The influence of the O/C atomic ratio in the graphene oxides was also evaluated. Quantum chemical and COSMO-based statistical-thermodynamic calculations were performed. Geometry optimizations demonstrated that graphene sheets are structurally distorted by oxygen substitution, although they show high resistance to deformation. Furthermore, under axial O-C bonding, proton-donor and proton-acceptor centers are created on the graphene oxide surface, which could acquire an amphoteric character. In low-oxidized graphene oxides, H-bonding centers coexist with neutral highly polarizable π electron clouds. Deep graphene oxidation is also related to the formation of a quasi-two-dimensional H-bond network. These two phenomena are responsible for the exceptional adsorption and catalytic properties and the potential proton conductivity of graphene oxides. The current calculations demonstrated that the interactions of polar molecular species with deep-oxidized graphene derivatives are thermodynamically favorable, but not with low-oxidized ones. The capacity of the quantum chemical and COSMO-RS calculations to model all these issues opens the possibility of selecting or designing graphene-based materials with optimized properties for specific applications. Also, they are valuable in selecting/designing solvents with good exfoliant properties with respect to certain graphene derivatives.

Advanced Microwave Strategies Facilitate Structural Engineering for Efficient Electrocatalysis

In the dynamic realm of energy conversion, the demand for efficient electrocatalysis has surged due to the urgent need to seamlessly integrate renewable energy. Traditional electrocatalyst preparation faces challenges like poor controllability, elevated costs, and stringent operational conditions. The introduction of microwave strategies represents a transformative shift, offering rapid response, high-temperature energy, and superior controllability. Notably, non-liquid-phase advanced microwave technology holds promise for introducing novel models and discoveries compared to traditional liquid-phase microwave methods. This review examines the nuanced applications of microwave technology in electrocatalyst structural engineering, emphasizing its pivotal role in the energy paradigm and addressing challenges in conventional methods. The ensuing discussion explores the profound impact of advanced microwave strategies on electrocatalyst structural engineering, highlighting discernible advantages in optimizing performance. Various applications of advanced microwave techniques in electrocatalysis are comprehensively discussed, providing a forward-looking perspective on their untapped potential to propel transformative strides in renewable energy research. It provides a forward-looking perspective, delving into the untapped potential of microwaves to propel transformative strides in renewable energy research.

Effects of Multidimensional Carbon-Based Nanomaterials on the Low-Carbon and High-Performance Cementitious Composites: A Critical Review

Cementitious composites are ubiquitous in construction, and more and more research is focused on improving mechanical properties and environmental effects. However, the jury is still out on which material can achieve low-carbon and high-performance cementitious composites. This article compares the mechanical and environmental performance of zero-dimensional fullerenes, one-dimensional carbon nanotubes (CNTs), two-dimensional graphene oxide (GO), and three-dimensional nano-graphite platelets (NGPs) on cementitious composites. The literature review shows that two-dimensional (2D) GO has the best mechanical and environmental performance, followed by 3D NGPs, 1D CNTs, and 0D fullerenes. Specifically, GO stands out for its lower energy consumption (120-140 MJ/kg) and CO2 emissions (0.17 kg/kg). When the optimal dosage (0.01-0.05 wt%) of GO is selected, due to its high specific surface area and strong adhesion to the matrix, the compressive strength of the cementitious composites is improved by nearly 50%. This study will help engineers and researchers better utilize carbon-based nanomaterials and provide guidance and direction for future research in related fields.

Flower like-novel nanocomposite of Mg(Ti0.99Sn0.01)O3decorated on reduced graphene oxide (rGO) with high capacitive behavior as supercapacitor electrodes

In this study, ceramic materials of Mg(Ti0.99Sn0.01)O3were synthesized and decorated on reduced graphene oxide, forming a nanocomposite of rGO/Mg(Ti0.99Sn0.01)O3(rGO/MTS001). The successful synthesis results were confirmed by XRD, UV-vis analysis, FT-IR, and SEM-EDS. The MTS001 has a flower-like morphology from scanning electron microscopy (SEM) analysis, and the nanocomposites of rGO/MTS001 showed MTS001 particles decorated on the rGO's surface. The electrochemical performance of rGO/MTS001 and MTS001 was investigated by determining the specific capacitance obtained in 1 M H2SO4solution by cyclic voltammetry, followed by galvanostatic charge-discharge analysis using a three-electrode setup. The rGO/MTS001 achieved a specific capacitance of 361.97 F g‒1, compared to MTS001 (194.90 F g‒1). The capacitance retention of rGO/MTS001 nanocomposite also depicted excellent cyclic stability of 95.72% after 5000 cycles at a current density of 0.1 A g‒1. The result showed that the nanocomposite of ceramics with graphene materials has a potential for high-performance supercapacitor electrodes.

Applications of graphene oxide and reduced graphene oxide in advanced dental materials and therapies

The graphene family of nanomaterials acquired significant attention in the field of dentistry due to a range of interesting properties. Graphene oxide (GO) and reduced graphene oxide (rGO) are the major graphene derivatives that are widely used in dental applications. These derivatives exhibit excellent mechanical properties, superior biocompatibility, good antibacterial properties, extreme chemical stability, and favorable tribological characteristics, thus representing highly materials for dentistry. The amphiphilic nature of GO allows covalent and noncovalent modifications that are favorable for biomedical applications. Graphene can influence the differentiation of dental pulp stem cells (DPSCs) and enhance the properties of other biomaterials. Here, we review the dental applications of GO or rGO with regards to antimicrobial activity, therapeutic drug delivery, restorative dentistry, implants, pulp regeneration, bone regeneration, periodontal tissue regeneration, biosensors, and tooth whitening.

Carbon Dots and Their Polymeric Nanocomposites: Insight into Their Synthesis, Photoluminescence Mechanisms, and Recent Trends in Sensing Applications

Carbon dots (CDs), a novel class of carbon-based nanoparticles, have received a lot of interest recently due to their exceptional mechanical, chemical, and fluorescent properties, as well as their excellent photostability and biocompatibility. CDs' emission properties have already found a variety of potential applications, in which bioimaging and sensing are major highlights. It is widely acknowledged that CDs' fluorescence and surface conditions are closely linked. However, due to the structural complexity of CDs, the specific underlying process of their fluorescence is uncertain and yet to be explained. Because of their low toxicity, robust and wide optical absorption, high chemical stability, rapid transfer characteristics, and ease of modification, CDs have been recognized as promising carbon nanomaterials for a variety of sensing applications. Thus, following such outstanding properties of CDs, they have been mixed and imprinted onto different polymeric components to achieve a highly efficient nanocomposite with improved functional groups and properties. Here, in this review, various approaches and techniques for the preparation of polymer/CDs nanocomposites have been elaborated along with the individual characteristics of CDs. CDs/polymer nanocomposites recently have been highly demanded for sensor applications. The insights from this review are detailed sensor applications of polymer/CDs nanocomposites especially for detection of different chemical and biological analytes such as metal ions, small organic molecules, and several contaminants.

Exploring the mechanism of graphene-oxide reduction by hydrazine in a multi-epoxide environment with DFT calculations

Reduction mechanisms between hydrazine and a multi-epoxide arrangement were investigated on a finite-sized graphene-oxide model with density functional theory. Three multistep reaction pathways were explored to examine different graphene-oxide (GO) deoxygenation scenarios. Epoxides sharing the same hexagonal ring show the typical one-by-one elimination of the oxygen functional groups through two protonation steps and the formation of cis-diazine and water. Nevertheless, the migration of one of the epoxy groups to an out-of-ring position has to precede the reduction. When a hexagonal ring separates two epoxy groups, forming a partially reduced surface with two hydroxyl groups is energetically favoured. This reduction product is so stable that it may remain on the surface after the termination of the reduction process. If further deoxygenation occurs, it can lead to surface fragmentation due to the ring opening of the remaining epoxides. The formation of nitrogen-containing functional groups at the edge of the graphene-oxide flake is also considered, and their surface presence is evaluated based on their thermodynamic stabilities.

Graphene-Based Aerogels for Biomedical Application

Aerogels are three-dimensional solid networks with incredibly low densities, high porosity, and large specific surface areas. These aerogels have both nanoscale and macroscopic interior structures. Combined with graphene, the aerogels show improved mechanical strength, electrical conductivity, surface area, and adsorption capacity, making them ideal for various biomedical applications. The graphene aerogel has a high drug-loading capacity due to its large surface area, and the porous structure enables controlled drug release over time. The presence of graphene makes it a suitable material for wound dressings, blood coagulation, and bilirubin adsorption. Additionally, graphene's conductivity can help in the electrical stimulation of cells for improved tissue regeneration, and it is also appropriate for biosensors. In this review, we discuss the preparation and advantages of graphene-based aerogels in wound dressings, drug delivery systems, bone regeneration, and biosensors.

Analog monolayer SWCNTs-based memristive 2D structure for energy-efficient deep learning in spiking neural networks

Advances in materials science and memory devices work in tandem for the evolution of Artificial Intelligence systems. Energy-efficient computation is the ultimate goal of emerging memristor technology, in which the storage and computation can be done in the same memory crossbar. In this work, an analog memristor device is fabricated utilizing the unique characteristics of single-wall carbon nanotubes (SWCNTs) to act as the switching medium of the device. Via the planar structure, the memristor device exhibits analog switching ability with high state stability. The device's conductance and capacitance can be tuned simultaneously, increasing the device's potential and broadening its applications' horizons. The multi-state storage capability and long-term memory are the key factors that make the device a promising candidate for bio-inspired computing applications. As a demonstrator, the fabricated memristor is deployed in spiking neural networks (SNN) to exploit its analog switching feature for energy-efficient classification operation. Results reveal that the computation-in-memory implementation performs Vector Matrix Multiplication with 95% inference accuracy and few femtojoules per spike energy efficiency. The memristor device presented in this work opens new insights towards utilizing the outstanding features of SWCNTs for efficient analog computation in deep learning systems.

An overview of contemporary developments and the application of graphene-based materials in anticorrosive coatings

Although graphene and graphene-based materials (GBMs) offer a wide range of possible applications, interest in their use as barrier layers or as reinforcements in coatings for the mitigation of corrosion has grown during the past decade. Because of its unique two-dimensional nanostructure and exceptional physicochemical characteristics, graphene has gotten a lot of attention as an anti-corrosion material. This enthusiasm is largely driven by the requirement to integrate more features, improve anti-corrosion effectiveness, and eventually prolong the service duration of metallic components. As barriers against metal corrosion, graphene nanosheets can be applied singly or in combination to create thin films, layered frameworks, or composites. Concurrently, over the past few years, significant advancements have been made in the establishment of scalable production methods for graphene and materials based on graphene. Since there is currently a wide variety of graphene material with various morphologies and characteristics, it is even more important that the production approach and the intended application be properly matched. This review gathers the most recent data and aims to give the reader a comprehensive overview of the most recent developments in the use of graphene and GBMs in various anti-corrosion strategies. The structure-property correlation and anticorrosion techniques in these systems are given special consideration. The current article offers a critical examination of this topic as well, stressing the areas that require more research.

Graphene-like emerging 2D materials: recent progress, challenges and future outlook

Owing to the unique physical and chemical properties of 2D materials and the great success of graphene in various applications, the scientific community has been influenced to explore a new class of graphene-like 2D materials for next-generation technological applications. Consequently, many alternative layered and non-layered 2D materials, including h-BN, TMDs, and MXenes, have been synthesized recently for applications related to the 4th industrial revolution. In this review, recent progress in state-of-the-art research on 2D materials, including their synthesis routes, characterization and application-oriented properties, has been highlighted. The evolving applications of 2D materials in the areas of electronics, optoelectronics, spintronic devices, sensors, high-performance and transparent electrodes, energy conversion and storage, electromagnetic interference shielding, hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and nanocomposites are discussed. In particular, the state-of-the-art applications, challenges, and outlook of every class of 2D material are also presented as concluding remarks to guide this fast-progressing class of 2D materials beyond graphene for scientific research into next-generation materials.

One-Stage Process of Reduction, Fluorination, and Doping with Nitrogen of Graphene Oxide Films

The possibility of chemical modification of a graphene oxide film deposited on a Si/SiO2 substrate during a one-stage hydrothermal process in the presence of fluorine ions and reducing agents, such as ascorbic acid or hydrazine, is shown. The proposed technique makes it possible to obtain reduced fluorinated graphene nitride oxide (RGOFN) in the form of a thin film with a controlled composition of functional groups by changing the type and concentration of the reducing agent and then transferring the obtained films to any substrate. XPS and IR spectroscopy of the obtained films revealed controlled changes in the structure and composition of graphene oxide associated with the removal of oxygen groups and the incorporation of fluorine ions as well as the reduction of conjugated double bonds and the controlled incorporation of nitrogen into thin RGOFN films. The current-voltage characteristics of the fabricated RGOFN structures showed that their electrical properties are well controlled by doping with nitrogen during the proposed one-stage process.

Controllable Photoreduction of Graphene Oxide/Gold Composite Using a Shaped Femtosecond Laser for Multifunctional Sensors

The mixture of graphene oxide and noble metal nanoparticles has been widely used in flexible multifunctional sensors. Femtosecond lasers are regarded as useful tools for sensor fabrication through direct inscribing. Normally, the laser power is adjusted to optimize the sensing performances. However, the process between the laser and the sample can be effectively altered by the temporal distribution of the pulse and the laser wavelength. This paper proposes a controllable photoreduction of graphene oxide/gold composite method using a shaped femtosecond laser and promotes its application on multifunctional sensors. Different from the strong reliance of the photoreduction process on laser fluence, femtosecond laser shaping expands the controllability range of the photoreduction degree. By combining the parameters of fluence, temporal distribution, laser wavelength, humidity, and strain multifunctional sensors can be both optimized by controlling the laser reduction. The strain sensor exhibits good linearity with a gauge factor of 67.2 in a strain range of 28.2%; the sensitivity of the humidity sensor is improved by 68.4%. The humidity sensor maintains its performance after 28 days, and the strain sensor maintains its stability after 5000 cycles of stretching. The multifunctional sensor can be applied to detect human breath and human pulse and holds value for human health monitoring.

Interplay of compound pollutants with microplastics transported in saturated porous media: Effect of co-existing graphene oxide and tetracycline

Co-existence of microplastics, nanomaterials, and antibiotics may lead to intensified multifaceted pollution, which may influence their fate in soils. This study investigated the co-transport behavior of polystyrene microplastics (PS) and compound pollutants of graphene oxide (GO) and tetracycline (TC). Packed column experiments for microplastic with or without combined pollutants were performed in KCl (10 and 30 mM) and CaCl2 solutions (0.3 and 1 mM). The results showed transport of PS was facilitated at low ionic strengths and inhibited at high ionic strengths by GO with or without TC under examined conditions. Carrier effect of GO as well as the aggregation of PS in the presence of co-exiting GO or GO-TC could be the contributor. Although the existence of TC relieved the ripening phenomenon of PS and GO deposition due to enhanced electronegativity of sand media, the effect of GO on the PS transport has not been significantly impacted, indicating the dominant role of GO during cotransport process. Furthermore, the transport of PS was increased by TC owing to competition for deposition sites on sand surfaces. In turn, the transport of TC was mainly affected by PS whether graphene was present or not. The increase in electrostatic repulsive force (transport-promoting) and addition adsorption sites (transport-inhibiting) may be responsible for the observations. Our findings could improve understandings of complex environmental behaviors of microplastics and provide insight into investigation on cotransport of emerging contaminants under various conditions relevant to the subsurface environment.

Enhancing electrochemical sensing through the use of functionalized graphene composites as nanozymes

Graphene-based nanozymes possess inherent nanomaterial properties that offer not only a simple substitute for enzymes but also a versatile platform capable of bonding with complex biochemical environments. The current review discusses the replacement of enzymes in developing biosensors with nanozymes. Functionalization of graphene-based materials with various nanoparticles can enhance their nanozymatic properties. Graphene oxide functionalization has been shown to yield graphene-based nanozymes that closely mimic several natural enzymes. This review provides an overview of the classification, current state-of-the-art development, synthesis routes, and types of functionalized graphene-based nanozymes for the design of electrochemical sensors. Furthermore, it includes a summary of the application of functionalized graphene-based nanozymes for constructing electrochemical sensors for pollutants, drugs, and various water and food samples. Challenges related to nanozymes as electrocatalytic materials are discussed, along with potential solutions and approaches for addressing these shortcomings.

Graphene Oxide Nanostructures as Nanoplatforms for Delivering Natural Therapeutic Agents: Applications in Cancer Treatment, Bacterial Infections, and Bone Regeneration Medicine

Graphene, fullerenes, diamond, carbon nanotubes, and carbon dots are just a few of the carbon-based nanomaterials that have gained enormous popularity in a variety of scientific disciplines and industrial uses. As a two-dimensional material in the creation of therapeutic delivery systems for many illnesses, nanosized graphene oxide (NGO) is now garnering a large amount of attention among these materials. In addition to other benefits, NGO functions as a drug nanocarrier with remarkable biocompatibility, high pharmaceutical loading capacity, controlled drug release capability, biological imaging efficiency, multifunctional nanoplatform properties, and the power to increase the therapeutic efficacy of loaded agents. Thus, NGO is a perfect nanoplatform for the development of drug delivery systems (DDSs) to both detect and treat a variety of ailments. This review article's main focus is on investigating surface functionality, drug-loading methods, and drug release patterns designed particularly for smart delivery systems. The paper also examines the relevance of using NGOs to build DDSs and considers prospective uses in the treatment of diseases including cancer, infection by bacteria, and bone regeneration medicine. These factors cover the use of naturally occurring medicinal substances produced from plant-based sources.

Glass-like behavior of intercalated organic solvents in graphite oxide detected by spin-probe EPR

Membranes based on graphite oxide (GO) are promising materials for the separation of polar liquids and gases. Understanding the properties of solvents immersed in GO is important for the development of various technological applications. Here, the molecular motions of the TEMPO nitroxide spin probe in acetonitrile intercalated into the GO inter-plane space were studied using electron paramagnetic resonance (EPR), including its pulsed version, and electron spin echo (ESE). For a sample containing 75% acetonitrile relative to equilibrium sorption at room temperature, ESE-detected stochastic librations were observed for TEMPO molecules above 135 K. Since these librations are an inherent property of molecular glasses, this fact indicates that intercalated acetonitrile forms a two-dimensional glass state. Above 225 K, an acceleration of stochastic librations was observed, indicating the manifestation of a glass-like dynamical cross-over. Continuous wave (CW) EPR spectra of TEMPO showed the absence of overall tumbling motions in the entire investigated temperature range of up to 340 K, indicating that the intercalated acetonitrile does not behave as a bulk liquid (the melting point of acetonitrile is 229 K). Dynamical librations of TEMPO molecules detected by CW EPR were found to accelerate above 240 K.

Influence of the Graphene Oxide on the Pore-Throat Connection of Cement Waste Rock Backfill

The pore-throat characteristics significantly affect the consolidated properties, such as the mechanical and permeability-related performance of the cementitious composites. By virtue of the nucleation and pore-infilling effects, graphene oxide (GO) has been proven as a great additive in reinforcing cement-based materials. However, the quantitative characterization reports of GO on the pore-throat connection are limited. This study applied advanced metal intrusion and backscattered electron (BSE) microscopy scanning technology to investigate the pore-throat connection characteristics of the cement waste rock backfill (CWRB) specimens before and after GO modification. The results show that the microscopic pore structure of CWRB is significantly improved by the GO nanosheets, manifested by a decrease in the total porosity up to 31.2%. With the assistance of the GO, the transfer among internal pores is from large equivalent pore size distribution to small equivalent pore size distribution. The fitting relationship between strength enhancement and pore reinforcement efficiency under different pore-throat characteristics reveals that the 1.70 μm pore-throat owns the highest correlation in the CWRB specimens, implying apply GO nanosheets to optimizing the pore-throat under this interval is most efficient. Overall, this research broadens our understanding of the pore-throat connection characteristics of CWRB and stimulates the potential application of GO in enhancing the mechanical properties and microstructure of CWRB.

Dynamics of reduced graphene oxide: synthesis and structural models

Technological advancements are leading to an upsurge in demand for functional materials that satisfy several of humankind's needs. In addition to this, the current global drive is to develop materials with high efficacy in intended applications whilst practising green chemistry principles to ensure sustainability. Carbon-based materials, such as reduced graphene oxide (RGO), in particular, can possibly meet this criterion because they can be derived from waste biomass (a renewable material), possibly synthesised at low temperatures without the use of hazardous chemicals, and are biodegradable (owing to their organic nature), among other characteristics. Additionally, RGO as a carbon-based material is gaining momentum in several applications due to its lightweight, nontoxicity, excellent flexibility, tuneable band gap (from reduction), higher electrical conductivity (relative to graphene oxide, GO), low cost (owing to the natural abundance of carbon), and potentially facile and scalable synthesis protocols. Despite these attributes, the possible structures of RGO are still numerous with notable critical variations and the synthesis procedures have been dynamic. Herein, we summarize the highlights from the historical breakthroughs in understanding the structure of RGO (from the perspective of GO) and the recent state-of-the-art synthesis protocols, covering the period from 2020 to 2023. These are key aspects in the realisation of the full potential of RGO materials through the tailoring of physicochemical properties and reproducibility. The reviewed work highlights the merits and prospects of the physicochemical properties of RGO toward achieving sustainable, environmentally friendly, low-cost, and high-performing materials at a large scale for use in functional devices/processes to pave the way for commercialisation. This can drive the sustainability and commercial viability aspects of RGO as a material.

An Overview of Recycling Wastes into Graphene Derivatives Using Microwave Synthesis; Trends and Prospects

It is no secret that graphene, a two-dimensional single-layered carbon atom crystal lattice, has drawn tremendous attention due to its distinct electronic, surface, mechanical, and optoelectronic properties. Graphene also has opened up new possibilities for future systems and devices due to its distinct structure and characteristics which has increased its demand in a variety of applications. However, scaling up graphene production is still a difficult, daunting, and challenging task. Although there is a vast body of literature reported on the synthesis of graphene through conventional and eco-friendly methods, viable processes for mass graphene production are still lacking. This review focuses on the variety of unwanted waste materials, such as biowastes, coal, and industrial wastes, for producing graphene and its potential derivatives. Among the synthetic routes, the main emphasis relies on microwave-assisted production of graphene derivatives. In addition, a detailed analysis of the characterization of graphene-based materials is presented. This paper also highlights the current advances and applications through the recycling of waste-derived graphene materials using microwave-assisted technology. In the end, it would alleviate the current challenges and forecast the specific direction of waste-derived graphene future prospects and developments.

Contemporary updates on bioremediation applications of graphene and its composites

Graphene, a 2D single-layered carbon sp² hybrid substance set in a honeycomb network, is widespread in many carbon-based materials. Due to its extraordinary optical, electrical, thermal, mechanical, and magnetic competences as well as its significant specific surface area, it has attracted a lot of interest recently. Synthesizing graphene refers to any process for creating or extracting the material, depending on the desired purity, size, and efflorescence of the finished good. Numerous methods have been employed for graphene synthesis categorized as top-down procedures and bottom-up procedures. Graphene finds its implementations in various industries such as electronics, energy, chemical, transport, defence, and biomedical areas such as accurate biosensing. It has been widely used in water treatment as a binder for organic contaminants and heavy metals. Many researches have fixated on creating various modified graphene, graphene oxide composites, graphene nanoparticle composites and semiconductor hybrids of graphene for contaminant removal from water. In this review, we have tried to address various production methods for graphene and its composites along with their advantages and disadvantages. Furthermore, we have presented a summary on graphene's outstanding immobilization of a variety of contaminants like toxic heavy metals, organic dyes, inorganic pollutants and pharmaceutical wastes. Additionally, a development of graphene-based microbial fuel cell (MFC) has been evaluated in an effort to produce ecological wastewater treatment and bioelectricity.

A Review on Graphene (GN) and Graphene Oxide (GO) Based Biodegradable Polymer Composites and Their Usage as Selective Adsorbents for Heavy Metals in Water

Water pollution due to heavy metal ions has become a persistent and increasing problem globally. To combat this, carbonaceous materials have been explored as possible adsorbents of these metal ions from solution. The problem with using these materials on their own is that their lifespan and, therefore, usability is reduced. Hence the need to mask them and an interest in using polymers to do so is picked. This introduces an improvement into other properties as well and opens the way for more applications. This work gives a detailed review of the major carbonaceous materials, graphene and graphene oxide, outlining their origin as well as morphological studies. It also outlines the findings on their effectiveness in removing heavy metal ions from water, as well as their water absorption properties. The section further reports on graphene/polymer and graphene oxide/polymer composites previously studied and their morphological as well as thermal properties. Then the work done in the absorption and adsorption capabilities of these composites is explored, thereby contrasting the two materials. This enables us to choose the optimal material for the desired outcome of advancing further in the utilization of carbonaceous material-based polymer composites to remove heavy metal ions from water.

Synthesis and Functionalization of Graphene Materials for Biomedical Applications: Recent Advances, Challenges, and Perspectives

Since its discovery in 2004, graphene is increasingly applied in various fields owing to its unique properties. Graphene application in the biomedical domain is promising and intriguing as an emerging 2D material with a high surface area, good mechanical properties, and unrivalled electronic and physical properties. This review summarizes six typical synthesis methods to fabricate pristine graphene (p-G), graphene oxide (GO), and reduced graphene oxide (rGO), followed by characterization techniques to examine the obtained graphene materials. As bare graphene is generally undesirable in vivo and in vitro, functionalization methods to reduce toxicity, increase biocompatibility, and provide more functionalities are demonstrated. Subsequently, in vivo and in vitro behaviors of various bare and functionalized graphene materials are discussed to evaluate the functionalization effects. Reasonable control of dose (<20 mg kg-1 ), sizes (50-1000 nm), and functionalization methods for in vivo application are advantageous. Then, the key biomedical applications based on graphene materials are discussed, coupled with the current challenges and outlooks of this growing field. In a broader sense, this review provides a comprehensive discussion on the synthesis, characterization, functionalization, evaluation, and application of p-G, GO, and rGO in the biomedical field, highlighting their recent advances and potential.

One-pot carboxyl enrichment fosters water-dispersibility of reduced graphene oxide: a combined experimental and theoretical assessment

Graphene, one of the allotropic forms of carbon, has attracted enormous interest in the last few years due to its unique properties. Reduced graphene oxide (RGO) is known as the nanomaterial most similar to graphene in terms of electronic, chemical, mechanical, and optical properties. It is prepared from graphene oxide (GO) in the presence of different types of reducing agents. Nevertheless, the application of RGO is still limited, owing to its tendency to irreversibly aggregate in an aqueous medium. Herein, we disclosed the preparation of water-dispersible RGO from GO previously enriched with additional carboxyl functional groups through a one-pot reaction, followed by chemical reduction. This novel and unprecedentedly reported reactivity of GO toward the acylating agent succinic anhydride (SA) was experimentally investigated through XPS, Raman, FT-IR, and UV-Vis, and corroborated by DFT calculations, which have shown a peculiar involvement in the functionalization reaction of both epoxide and hydroxyl functional groups. This proposed synthetic protocol avoids use of sodium cyanide, previously reported for carboxylation of graphene, and focuses on the sustainable and scalable preparation of a water-dispersible RGO, paving the way for its application in many fields where the colloidal stability in aqueous medium is required.

Liquid-like and solid-like acetonitrile intercalated into graphite oxide as studied by the spin probe technique

The molecular mobility of acetonitrile intercalated into the inter-plane space of graphite oxide was studied using the spin probe technique. It was revealed that two types of intercalated substance - liquid-like and solid-like - are simultaneously present in between the oxidized graphene planes, and their ratio depends on temperature. The micro-viscosity of liquid-like intercalated acetonitrile was found to be higher than that of bulk acetonitrile and depends on the amount of intercalated liquid.

Preconcentration and Removal of Pb(II) Ions from Aqueous Solutions Using Graphene-Based Nanomaterials

Direct determination of lead trace concentration in the presence of relatively complex matrices is often a problem. Thus, its preconcentration and separation are necessary in the analytical procedures. Graphene-based nanomaterials have attracted significant interest as potential adsorbents for Pb(II) preconcentration and removal due to their high specific surface area, exceptional porosities, numerous adsorption sites and functionalization ease. Particularly, incorporation of magnetic particles with graphene adsorbents offers an effective approach to overcome the separation problems after a lead enrichment step. This paper summarizes the developments in the applications of graphene-based adsorbents in conventional solid-phase extraction column packing and its alternative approaches in the past 5 years.

Recent Trends in Metal Nanoparticles Decorated 2D Materials for Electrochemical Biomarker Detection

Technological advancements in the healthcare sector have pushed for improved sensors and devices for disease diagnosis and treatment. Recently, with the discovery of numerous biomarkers for various specific physiological conditions, early disease screening has become a possibility. Biomarkers are the body's early warning systems, which are indicators of a biological state that provides a standardized and precise way of evaluating the progression of disease or infection. Owing to the extremely low concentrations of various biomarkers in bodily fluids, signal amplification strategies have become crucial for the detection of biomarkers. Metal nanoparticles are commonly applied on 2D platforms to anchor antibodies and enhance the signals for electrochemical biomarker detection. In this context, this review will discuss the recent trends and advances in metal nanoparticle decorated 2D materials for electrochemical biomarker detection. The prospects, advantages, and limitations of this strategy also will be discussed in the concluding section of this review.

Reduced graphene oxide: Biofabrication and environmental applications

Green synthesis of high-quality reduced graphene oxide (rGO) from agro-industrial waste resources remains attractive owing to its outstanding environmental benefits. The remarkable properties of rGO include excellent morphology, uniform particle size, good optical properties, high conductivity, nontoxicity, and extraordinary chemical stability. Traditional methods for the synthesis of rGO nanomaterials involve several chemical reactions including oxidation, carbonization, toxic solvent, and pyrolysis which produce harmful byproducts. Green preparation of rGO is an emerging area of research in graphene technology which is cost-effective and sustainable in the procedure. Owing to the uniform particle rGO particle size, these smart nanomaterials have wide applicability, including in metal ions and pollutant sensing and adsorption, photocatalysis, optoelectrical devices, medical diagnosis, and drug delivery. Here we review the physicochemical properties of rGO, the biowaste sources and green methods of rGO synthesis, and the diverse applications of rGO, including in water purification and the biomedical fields. With this review, covering more than 200 research articles published on rGO in the last eight years ending in 2022, we aim to provide a quick guide for researchers seeking up-to-date information on the properties, production, and applicability of rGO, with special attention to rGO applications in water purification and the biomedical fields.

Effects of Moisture and Synthesis-Derived Contaminants on the Mechanical Properties of Graphene Oxide: A Molecular Dynamics Investigation

This paper reports on the effects of the chemical composition of graphene oxide (GO) sheets on the mechanical properties of bulk GO. Three key factors were analyzed: (i) the oxygenated functional groups' concentration, (ii) the content of intersheet water (moisture), and (iii) the presence of residual contaminants observed from the synthesis of GO. Molecular dynamics simulations using the reactive force field ReaxFF were conducted to model tensile strength, indentation, and shear stress tests. The structural integrity of the carbon basal plane was the primary variable that determined mechanical behavior of GO slabs. Hydrogen-bond networks played an essential role in the tensile fracture mechanism, delaying the onset of fracture whenever strong hydrogen bonds existed in the intersheet space. The presence of interlayer sulfate ion contaminants negatively impacted the tensile strength, stiffness, and toughness of GO. Moreover, it was observed that intersheet sulfate ions improved the resistance to fracture of GO at low sulfur concentrations, while lower fracture strains were observed beyond a critical concentration. Alike the tensile stress findings, the indentation properties were determined by the integrity of the carbon basal plane. Our findings agree with experimental mechanical property measurements and reveal the importance of considering synthesis-derived contaminants in molecular models of GO.

Modified low-temperature synthesis of graphene oxide nanosheets: Enhanced adsorption, antibacterial and antioxidant properties

Herein, we report a simple, low-temperature, ecofriendly synthesis of graphene oxide nanosheets (GONs). Graphite powder was treated with KMnO₄ and a concentrated H₂SO₄/H₃PO₄ mixture to synthesize GONs. The effects of various reaction conditions such as reaction time, temperature, amounts of cleaving agents (H₂SO₄/H₃PO₄), and oxidant (KMnO₄) were investigated. The synthesized GONs were examined by various techniques in order to investigate their characteristics. The best results of the synthesized GONs were observed at 35 °C within 10 h of reaction time having 8:2 ratios of H₂SO₄/H₃PO₄ acid mixture. The main absorption peak in the UV-vis spectra of GONs was at 258 nm, which is due to the π-π* transition of the atomic CC bonds. The existence of stretching vibrations of C꞊O, O-H, C-H, and C-O in the Fourier transform infrared (FTIR) spectra verified the formation of GONs. Presence of a sharp peak at 2θ = 10° with an interlayer spacing distance of 0.88 nm in the observed XRD pattern revealed that the synthesized GONs were totally oxidized and that the interlayer spacing increased. The morphological investigations confirmed the formation of ultrathin, transparent, curly, and homogenous GONs. The synthesized GONs were applied as an adsorbent for the rapid uptake of four different pesticides viz.; Profenofos, Ethion, Cypermethrin, Thiamethoxam (TMX) from the pesticides spiked water samples. About 86% adsorption of Profenofos + Cypermethrin, and 50% adsorption of ethion and thiamethoxam took place within 20 min in presence of 10 mg GONs. In addition to this, the prepared GONs were tested for the antibacterial activity against four bacterial strains by agar well diffusion method. The synthesized GONs provide a significant inhibition for gram -positive (Bacillus subtilis, and Staphylococcus aureus) and gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacterial strains. Moreover, the radical scavenging activities (RSA) of GONs were also checked and compared with Gallic acid as a standard. The obtained RSA of GONs was 60% in comparison to the 80% as of the standard Gallic acid at 1000 μg/mL concentration.

Recent biomedical advancements in graphene oxide- and reduced graphene oxide-based nanocomposite nanocarriers

Recently, nanocarriers, including micelles, polymers, carbon-based materials, liposomes, and other substances, have been developed for efficient delivery of drugs, nucleotides, and biomolecules. This review focuses on graphene oxide (GO) and reduced graphene oxide (rGO) as active components in nanocarriers, because their chemical structures and easy functionalization can be valuable assets for in vitro and in vivo delivery. Herein, we describe the preparation, structure, and functionalization of GO and rGO. Additionally, their important properties to function as nanocarriers are presented, including their molecular interactions with various compounds, near-infrared light adsorption, and biocompatibility. Subsequently, their mechanisms and the most appealing examples of their delivery applications are summarized. Overall, GO- and rGO-based nanocomposites show great promise as multipurpose nanocarriers owing to their various potential applications in drug and gene delivery, phototherapy, bioimaging, biosensing, tissue engineering, and as antibacterial agents.

Rapid Microwave-Assisted Synthesis of N/TiO2/rGO Nanoparticles for the Photocatalytic Degradation of Pharmaceuticals

Nanocomposites comprising nitrogen-doped TiO₂ and reduced graphene oxide (N/TiO₂/rGO), with different rGO loading qualities, were prepared by a cost-effective microwave-assisted synthesis method. The synthesized materials were broadly characterized by Raman spectroscopy, X-ray diffraction (XRD), infrared spectroscopy (FTIR), photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS), electron microscopy (SEM-EDS), and nitrogen adsorption/desorption isotherms. Anatase was the only crystalline phase observed for all synthesized materials. The rGO loading did not affect the morphological properties, but it positively influenced the photocatalytic activity of the nanocomposite materials, especially at low rGO loading. Photocatalysts were evaluated via the degradation of specific organic micropollutant (OMP) pharmaceuticals: ciprofloxacin (CIP), diclofenac (DCF), and salicylic acid (SA), under different radiation sources: ultraviolet A (UVA), solar light simulator (SLS), blue visible light (BVL) and cold visible light (CVL). CIP and SA were removed effectively via the synergy of adsorption and photocatalysis, while DCF degradation was achieved solely by photocatalysis. After implementing scavenger agents, photocatalytic degradation processes mainly depended on the specific pollutant type, while irradiation sources barely defined the photocatalytic mechanism. On the other hand, changes in irradiation intensity significantly influenced the photolysis process, while photocatalysis was slightly affected, indicating that irradiation spectra are more relevant than intensity.

Study of molar properties of GO after doping with transition metals for photodegradation of fluorescent dyes

We synthesized graphene oxide (GO) doped with transition metal ions and characterized it using XPS, FT-IR, TGA/DTG, XRD, SEM, AFM, ICP-OES, UV/vis, and Raman spectroscopy. An intrinsic viscosity [η] of 0.002-0.012 g% @ 0.002 aq-GO was determined for viscosity average molecular weight (M _v) of GO at 288.15, 298.15, and 308.15 K. Mark-Houwink (M-H) constants k (cm³ g^-1) and a (cm³ mol g^-2) were calculated for 5-15 mg/100 mL polyvinylpyrrolidone (PVP), using 29, 40, 55 kg mol^-1 as markers for calculating M _v by fitting the [η] to the Mark-Houwink-Sakurada equation (MHSE). We obtained 48 134.19 g mol^-1 M _v at 298.15 K, and the apparent molar (V _{ϕ m} , cm³ mol^-1), limiting molar volumes (V ⁰ _GO)_GO⃑0, enthalpy (ΔH _m, J mol^-1), entropy (ΔS _m, J mol^-1 K^-1), viscosity (η _m, mPa s mol^-1), surface tension (γ _m, mN m^-1 mol^-1), friccohesity (σ _m, scm^-1 mol^-1), fractional volume (ϕ _m, cm³ mol^-1), isentropic compressibility (K _sϕ,m, 10^-4 cm s² g^-1 mol), infer GO molar consistency throughout the chemical processes. Molar properties (MPs) infer a GO monodispersion producing negative electrons (e^-) and positive holes (h⁺) under sunlight. The transition metal ions (Fe²⁺, Mn²⁺, Ni²⁺, Cr³⁺, TMI) doped onto GO (TMI-GO), can photodegrade methylene blue (MB) in 60 min compared with 120 min using GO alone. The 4011 C atoms, 688 hexagonal sheets, 222 π-conjugations, and 4011 FE were calculated from the 48 134.19 g mol^-1. The functional edges are the negative and positive holes generating centres of the GO 2D sheets.

Synthesis of Graphene-Based Nanocomposites for Environmental Remediation Applications: A Review

The term graphene was coined using the prefix "graph" taken from graphite and the suffix "-ene" for the C=C bond, by Boehm et al. in 1986. The synthesis of graphene can be done using various methods. The synthesized graphene was further oxidized to graphene oxide (GO) using different methods, to enhance its multitude of applications. Graphene oxide (GO) is the oxidized analogy of graphene, familiar as the only intermediate or precursor for obtaining the latter at a large scale. Graphene oxide has recently obtained enormous popularity in the energy, environment, sensor, and biomedical fields and has been handsomely exploited for water purification membranes. GO is a unique class of mechanically robust, ultrathin, high flux, high-selectivity, and fouling-resistant separation membranes that provide opportunities to advance water desalination technologies. The facile synthesis of GO membranes opens the doors for ideal next-generation membranes as cost-effective and sustainable alternative to long existing thin-film composite membranes for water purification applications. Many types of GO-metal oxide nanocomposites have been used to eradicate the problem of metal ions, halomethanes, other organic pollutants, and different colors from water bodies, making water fit for further use. Furthermore, to enhance the applications of GO/metal oxide nanocomposites, they were deposited on polymeric membranes for water purification due to their relatively low-cost, clear pore-forming mechanism and higher flexibility compared to inorganic membranes. Along with other applications, using these nanocomposites in the preparation of membranes not only resulted in excellent fouling resistance but also could be a possible solution to overcome the trade-off between water permeability and solute selectivity. Hence, a GO/metal oxide nanocomposite could improve overall performance, including antibacterial properties, strength, roughness, pore size, and the surface hydrophilicity of the membrane. In this review, we highlight the structure and synthesis of graphene, as well as graphene oxide, and its decoration with a polymeric membrane for further applications.

Structural Control and Electrical Behavior of Thermally Reduced Graphene Oxide Samples Assisted with Malonic Acid and Phosphorus Pentoxide

We present a detailed study of the structural and electrical changes occurring in two graphene oxide (GO) samples during thermal reduction in the presence of malonic acid (MA) (5 and 10 wt%) and P2O5 additives. The morphology and de-oxidation efficiency of reduced GO (rGO) samples are characterized by Fourier transform infrared, X-ray photoelectron, energy-dispersive X-ray, Raman spectroscopies, transmission electron and scanning electron microscopies, X-ray diffraction (XRD), and electrical conductivity measurements. Results show that MA and P2O5 additives are responsible for the recovery of π-conjugation in rGO as the XRD pattern presents peaks corresponding to (002) graphitic-lattice planes, suggesting the formation of the sp2-like carbon structure. Raman spectra show disorders in graphene sheets. Elemental analysis shows that the proposed reduction method in the presence of additives also suggests the simultaneous insertion of phosphorus with a relatively high content (0.3–2.3 at%) in rGO. Electrical conductivity measurements show that higher amounts of additives used in the GO reduction more effectively improve electron mobility in rGO samples, as they possess the highest electrical conductivity. Moreover, the relatively high conductivity at low bulk density indicates that prepared rGO samples could be applied as metal-free and non-expensive carbon-based electrodes for supercapacitors and (bio)sensors.

Shape Entropy of a Reconfigurable Ising Surface

Disclinations in a 2D sheet create regions of Gaussian curvature whose inversion produces a reconfigurable surface with many distinct metastable shapes, as shown by molecular dynamics of a disclinated graphene monolayer. This material has a near-Gaussian "density of shapes" and an effectively antiferromagnetic interaction between adjacent cones. A∼10  nm patch has hundreds of distinct metastable shapes with tunable stability and topography on the size scale of biomolecules. As every conical disclination provides an Ising-like degree of freedom, we call this technique "Isigami."

A Novel Electrochemical Sensor for Detection of Nicotine in Tobacco Products Based on Graphene Oxide Nanosheets Conjugated with (1,2-Naphthoquinone-4-Sulphonic Acid) Modified Glassy Carbon Electrode

A simple electrochemical sensor for nicotine (NIC) detection was performed. The sensor based on a glassy carbon electrode (GCE) was modified by (1,2-naphthoquinone-4-sulphonic acid)(Nq) decorated by graphene oxide (GO) nanocomposite. The synthesized (GO) nanosheets were characterized using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscope (SEM), transmission electron microscope (TEM), FT-IR, and UV-Visible Spectroscopy. The insertion of Nq with GO nanosheets on the surface of GCE displayed high electrocatalytic activity towards NIC compared to the bare GCE. NIC determination was performed under the optimum conditions using 0.10 M of Na2SO4 as a supporting electrolyte with pH 8.0 at a scan rate of 100 mV/s using both cyclic voltammetry (CV) and differential pulse voltammetry (DPV). This electrochemical sensor showed an excellent result for NIC detection. The oxidation peak current increased linearly with a 6.5-245 µM of NIC with R2 = 0.9999. The limit of detection was 12.7 nM. The fabricated electrode provided satisfactory stability, reproducibility, and selectivity for NIC oxidation. The reliable GO/Nq/GCE sensor was successfully applied for detecting NIC in the tobacco product and a urine sample.

Selective Ion Sensing in Artificial Sweat Using Low-Cost Reduced Graphene Oxide Liquid-Gated Plastic Transistors

Health monitoring is experiencing a radical shift from clinic-based to point-of-care and wearable technologies, and a variety of nanomaterials and transducers have been employed for this purpose. 2D materials (2DMs) hold enormous potential for novel electronics, yet they struggle to meet the requirements of wearable technologies. Here, aiming to foster the development of 2DM-based wearable technologies, reduced graphene oxide (rGO)-based liquid-gated transistors (LGTs) for cation sensing in artificial sweat endowed with distinguished performance and great potential for scalable manufacturing is reported. Laser micromachining is employed to produce flexible transistor test patterns employing rGO as the electronic transducer. Analyte selectivity is achieved by functionalizing the transistor channel with ion-selective membranes (ISMs) via a simple casting method. Real-time monitoring of K⁺ and Na⁺ in artificial sweat is carried out employing a gate voltage pulsed stimulus to take advantage of the fast responsivity of rGO. The sensors show excellent selectivity toward the target analyte, low working voltages (<0.5 V), fast (5-15 s), linear response at a wide range of concentrations (10 µm to 100 mm), and sensitivities of 1 µA/decade. The reported strategy is an important step forward toward the development of wearable sensors based on 2DMs for future health monitoring technologies.

Effects of Cu2+/Zn2+ on the electrochemical performance of polyacrylamide hydrogels as advanced flexible electrode materials

Previously, solid-state electrode materials have been utilized for the fabrication of energy storage devices; however, their application is impeded by their brittle nature and ion mobility problems. To address issues faced in such a modern era where energy saving and utility is of prior importance, a novel approach has been applied for the preparation of electrode materials based on polyacrylamide hydrogels embedded with reduced graphene oxide and transition metals, namely, Cu²⁺ and Zn²⁺. The fabricated hydrogel exhibits high electrical properties and flexibility that make it a favorable candidate to be used in energy storage devices, where both elastic and electrical properties are desired. For the first time, a multi-cross-linked polyacrylamide hydrogel was constructed and compared in the presence of other electro-active materials such as reduced graphene oxide and transition metals. Polyacrylamide hydrogels embedded with reduced graphene oxide demonstrate excellent electrical properties such as specific capacitance, least impedance, low phase angle shift and AC conductivity of 22.92 F g^-1, 2115 Ω, 2.88° and 0.67 μδ m^-1 respectively as compared to Cu²⁺- and Zn²⁺-loaded hydrogels, which block all available active sites causing an increase in impedance with a parallel decrease in capacitance. The capacitance retention and coulombic efficiency calculated were 88.22% and 77.23% respectively, indicating high stability up to 150 cycles at 0.1 A g^-1. Storage moduli obtained were 10.52 kPa, which infers the more elastic nature of the hydrogel loaded with graphene oxide than that of other synthesized hydrogels.

Highly sensitive determination of paracetamol, uric acid, dopamine, and catechol based on flexible plastic electrochemical sensors

Flexible sensing is an alternative to traditional sensing and possesses good flexibility and wearability. Intrinsically conductive polymers, particularly poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS), have received significant attention due to their high mechanical flexibility and good biocompatibility. Here, we report the design of highly conductive and electrochemically active PEDOT:PSS-coated plastic substrate electrodes by combining N-doped graphene (NG) or S-doped graphene (SG) with methanesulfonic acid-treated PEDOT:PSS (denoted as NG-f-MSA-PEDOT:PSS/PET and SG-f-MSA-PEDOT:PSS/PET) by a simple drop-coating method. At room temperature, the NG-f-MSA-PEDOT:PSS/PET electrode demonstrated the lowest detection limits of 17.09, 33.84, 28.30, and 44.96 nM for paracetamol, uric acid, dopamine, and catechol (S/N = 3), respectively. The NG-f-MSA-PEDOT:PSS/PET electrode had good anti-interference ability and reproducibility without employing expensive noble metals and requiring much effort to polish the surface of traditional glass carbon electrodes. Most importantly, this film electrode could maintain a stable electrochemical response under different bending and crease states and had excellent mechanical stability and flexibility.

Graphene Oxide (GO) Materials-Applications and Toxicity on Living Organisms and Environment

Graphene-based materials have attracted much attention due to their fascinating properties such as hydrophilicity, high dispersion in aqueous media, robust size, high biocompatibility, and surface functionalization ability due to the presence of functional groups and interactions with biomolecules such as proteins and nucleic acid. Modified methods were developed for safe, direct, inexpensive, and eco-friendly synthesis. However, toxicity to the environment and animal health has been reported, raising concerns about their utilization. This review focuses primarily on the synthesis methods of graphene-based materials already developed and the unique properties that make them so interesting for different applications. Different applications are presented and discussed with particular emphasis on biological fields. Furthermore, antimicrobial potential and the factors that affect this activity are reviewed. Finally, questions related to toxicity to the environment and living organisms are revised by highlighting factors that may interfere with it.

Graphene Oxide-Cytochrome c Multilayered Structures for Biocatalytic Applications: Decrypting the Role of Surfactant in Langmuir-Schaefer Layer Deposition

Graphene, a two-dimensional single-layer carbon allotrope, has attracted tremendous scientific interest due to its outstanding physicochemical properties. Its monatomic thickness, high specific surface area, and chemical stability render it an ideal building block for the development of well-ordered layered nanostructures with tailored properties. Herein, biohybrid graphene-based layer-by-layer structures are prepared by means of conventional and surfactant-assisted Langmuir-Schaefer layer deposition techniques, whereby cytochrome c molecules are accommodated within ordered layers of graphene oxide. The biocatalytic activity of the as-developed nanobio-architectures toward the enzymatic oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt and decolorization of pinacyanol chloride is tested. The results show that the multilayer structures exhibit high biocatalytic activity and stability in the absence of surfactant molecules during the deposition of the monolayers.

Improving the EMI shielding of graphene oxide (GNO)-coated glass-fiber-GNO-MA-grafted polypropylene (PP) composites and nylon 1D-2D nanocomposite foams

The proliferation of the latest electronic gadgets and wireless communication devices can trigger electromagnetic interference (EMI), which has a detrimental impact on electronic devices and humans. Efficient EMI shielding materials are required for EMI-SE and they should be durable in external environments, lightweight, and cost-effective. GNO-coated glass-fiber-GNO-maleic anhydride-grafted polypropylene (MAPP) composite and carbon fiber-reinforced nylon 1D-2D nanocomposite foam were successfully prepared via a cost-effective thermal process. The composites were characterized using scanning electron microscopy (SEM), Raman spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The PP and nylon-based composites with ∼13% filler showed maximum electrical conductivity (EC) of 878 mS cm-1 and 1381 mS cm-1, respectively. The GNO-coated glass-fiber-GNO-MAPP foam displays a maximum EMI-SE of 120.6 dB, while the nylon graphene-carbon nanotube-metal nanoplatelet foam exhibits a maximum EMI-SE of 139.1 dB in the X-band region. The GFCFFeGMAPP composite possesses a minimum thickness of 2.56 mm and blocks most incoming radiation. These are some of the highest EMI-SE values reported so far for glass fiber and nylon-based composites, and the nylon-based composite showed excellent properties compared to the glass fiber-based composite. Thus, we believe that the developed composites can be used in a wide range of real applications, such as in military vehicles, aviation, automobiles, and the packaging of electronic circuits.

Microwave-Assisted Synthesis of Reduced Graphene Oxide with Hollow Nanostructure for Application to Lithium-Ion Batteries

In this study, reduced graphene oxide (RGO) with a hollow nanostructure was successfully synthesized by layer-by-layer self-assembly using electrostatic interactions and van der Waals forces between building blocks, and its lithium storage characteristics were investigated. After 800 cycles at a current density of 1 A/g, the microwave-irradiated RGO hollow spheres (MRGO-HS) maintained a capacity of 626 mA h/g. In addition, when the charge/discharge capacity was measured stepwise in the current density range of 0.1-2 A/g, the discharge capacity of the RGO rapidly decreased to 156 mA h/g even at the current density of 2 A/g, whereas MRGO-HS provided a capacity of 252 mA h/g. Even after the current density was restored at a current density of 0.1 A/g, the MRGO-HS capacity was maintained to be 827 mA h/g at the 100th cycle, which is close to the original reversible capacity. Thus, MRGO-HS provides a higher capacity and better rate capability than those of traditionally synthesized RGO.