Hexagonal boron nitride nanoplates as emerging biological nanovectors and their potential applications in biomedicine

Incrimination and impact on recovery times and effects of BN nanostructures on antineoplastic drug-electronic density study

CONTEXT

By delivering the drug to the intended cell location, the use of nanomaterials in the drug delivery system may influence how the patient receives the medication and may assist in mitigating severe side effects. Density functional theory was used to assess the use of boron carbon nitride nanocages (BNCNCs), boron nitride (BNNSs), and boron carbon nitride nanosheets (BNCNSs) as melphalan (Mln) drug carriers in both the gaseous and fluid phases. We systematically examined the dipole moment, density of states, frontier molecular orbital, and optimal adsorption energy to understand the targeted drug delivery potential of these nanostructures. Adsorption energy analysis revealed that in both gas and water media, Mln drug adsorption takes place spontaneously on all the conjugated structures. The occurrence of adsorption energy as physisorbed energy suggests that the process is reversible, and desorption can take place with a much lower energy input. This physical contact is appropriate for the unquestionable unloading of Mln medications to the intended location. The reactivity is higher in BNNSs and BNCNSs, while the stability is higher in BNCNCs. The recovery time shows a shorter time for BNNSs and BNCNSs, while BNCNC shows a potential desorption time in higher temperature. These conclusions are corroborated by the results of the quantum theory of atoms in molecules (QTAIM). After the interaction analysis, it was observed that the BNCNCs can act as potential carriers for the melphalan. From dipole moment analysis, all three nanostructures show a high hydrophilic nature but quite higher in BNCNCs after doping in both media. Overall, all the structures show the potential carrier for melphalan drug.

METHODS

The quantum mechanical approach, or DFT, has been used to study the fundamental structural, electrical, thermodynamic, and other aspects of proposed structures to develop an acceptable Mln drug detector. The adsorbate and all adsorbents were optimized via the hybrid B3LYP functional and the 6-311G +  + (2d, p) basis set approach prior to the adsorption process. The Gaussian 09 package was used at 298 K as the constant temperature and 1 atm as the constant pressure. The structures are examined using the same functional models for solvation analysis-6-311 G +  + (2d, p) and B3LYP-as well as the polarized continuum model (PCM) model as the foundation set. Density of states was studied using GaussSum 3.0 software. The interaction studies QTAIM and RDG were studied using VMD and Multiwfn software.

Emerging 2D Nanomaterials-Integrated Hydrogels: Advancements in Designing Theragenerative Materials for Bone Regeneration and Disease Therapy

This review highlights recent advancements in the synthesis, processing, properties, and applications of 2D-material integrated hydrogels, with a focus on their performance in bone-related applications. Various synthesis methods and types of 2D nanomaterials, including graphene, graphene oxide, transition metal dichalcogenides, black phosphorus, and MXene are discussed, along with strategies for their incorporation into hydrogel matrices. These composite hydrogels exhibit tunable mechanical properties, high surface area, strong near-infrared (NIR) photon absorption and controlled release capabilities, making them suitable for a range of regeneration and therapeutic applications. In cancer therapy, 2D-material-based hydrogels show promise for photothermal and photodynamic therapies, and drug delivery (chemotherapy). The photothermal properties of these materials enable selective tumor ablation upon NIR irradiation, while their high drug-loading capacity facilitates targeted and controlled release of chemotherapeutic agents. Additionally, 2D-materials -infused hydrogels exhibit potent antibacterial activity, making them effective against multidrug-resistant infections and disruption of biofilm generated on implant surface. Moreover, their synergistic therapy approach combines multiple treatment modalities such as photothermal, chemo, and immunotherapy to enhance therapeutic outcomes. In bio-imaging, these materials serve as versatile contrast agents and imaging probes, enabling their real-time monitoring during tumor imaging. Furthermore, in bone regeneration, most 2D-materials incorporated hydrogels promote osteogenesis and tissue regeneration, offering potential solutions for bone defects repair. Overall, the integration of 2D materials into hydrogels presents a promising platform for developing multifunctional theragenerative biomaterials.

Boron Nitride Nanosheets Induce Lipid Accumulation and Autophagy in Human Alveolar Lung Epithelial Cells Cultivated at Air-Liquid Interface

Hexagonal boron nitride (hBN) is an emerging 2D material attracting significant attention due to its superior electrical, chemical, and therapeutic properties. However, inhalation toxicity mechanisms of hBN in human lung cells are poorly understood. Here, cellular interaction and effects of hBN nanosheets is investigated in alveolar epithelial cells cultured on porous inserts and exposed under air-liquid interface conditions for 24 h. hBN is taken up by the cells as determined in a label-free manner via RAMAN-confocal microscopy, ICP-MS, TEM, and SEM-EDX. No significant (p > 0.05) effects are observed on cell membrane integrity (LDH release), epithelial barrier integrity (TEER), interleukin-8 cytokine production or reactive oxygen production at tested dose ranges (1, 5, and 10 µg cm-2). However, it is observed that an enhanced accumulation of lipid granules in cells indicating the effect of hBN on lipid metabolism. In addition, it is observed that a significant (p < 0.05) and dose-dependent (5 and 10 µg cm-2) induction of autophagy in cells after exposure to hBN, potentially associated with the downstream processing and breakdown of excess lipid granules to maintain lipid homeostasis. Indeed, lysosomal co-localization of lipid granules supporting this argument is observed. Overall, the results suggest that the continuous presence of excess intracellular lipids may provoke adverse outcomes in the lungs.

Environmental and Health Impacts of Graphene and Other Two-Dimensional Materials: A Graphene Flagship Perspective

Two-dimensional (2D) materials have attracted tremendous interest ever since the isolation of atomically thin sheets of graphene in 2004 due to the specific and versatile properties of these materials. However, the increasing production and use of 2D materials necessitate a thorough evaluation of the potential impact on human health and the environment. Furthermore, harmonized test protocols are needed with which to assess the safety of 2D materials. The Graphene Flagship project (2013-2023), funded by the European Commission, addressed the identification of the possible hazard of graphene-based materials as well as emerging 2D materials including transition metal dichalcogenides, hexagonal boron nitride, and others. Additionally, so-called green chemistry approaches were explored to achieve the goal of a safe and sustainable production and use of this fascinating family of nanomaterials. The present review provides a compact survey of the findings and the lessons learned in the Graphene Flagship.

Recent advances in nano-scaffolds for tissue engineering applications: Toward natural therapeutics

Among the promising methods for repairing or replacing tissue defects in the human body and the hottest research topics in medical science today are regenerative medicine and tissue engineering. On the other hand, nanotechnology has been expanded into different areas of regenerative medicine and tissue engineering due to its essential benefits in improving performance in various fields. Nanotechnology, a helpful strategy in tissue engineering, offers new solutions to unsolved problems. Especially considering the excellent physicochemical properties of nanoscale structures, their application in regenerative medicine has been gradually developed, and a lot of research has been conducted in this field. In this regard, various nanoscale structures, including nanofibers, nanosheets, nanofilms, nano-clays, hollow spheres, and different nanoparticles, have been developed to advance nanotechnology strategies with tissue repair goals. Here, we comprehensively review the application of the mentioned nanostructures in constructing nanocomposite scaffolds for regenerative medicine and tissue engineering. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Diagnostic Tools > Biosensing.

Preparation, Characterization, and Drug Delivery of Hexagonal Boron Nitride-Borate Bioactive Glass Biomimetic Scaffolds for Bone Tissue Engineering

In this study, biomimetic borate-based bioactive glass scaffolds containing hexagonal boron nitride hBN nanoparticles (0.1, 0.2, 0.5, 1, and 2% by weight) were manufactured with the polymer foam replication technique to be used in hard tissue engineering and drug delivery applications. To create three-dimensional cylindrical-shaped scaffolds, polyurethane foams were used as templates and covered using a suspension of glass and hBN powder mixture. Then, a heat treatment was applied at 570 °C in an air atmosphere to remove the polymer foam from the structure and to sinter the glass structures. The structural, morphological, and mechanical properties of the fabricated composites were examined in detail. The in vitro bioactivity of the prepared composites was tested in simulated body fluid, and the release behavior of gentamicin sulfate and 5-fluorouracil from glass scaffolds were analyzed separately as a function of time. The cytotoxicity was investigated using osteoblastic MC3T3-E1 cells. The findings indicated that the hBN nanoparticles, up to a certain concentration in the glass matrix, improved the mechanical strength of the glass scaffolds, which mimic the cancellous bone. Additionally, the inclusion of hBN nanoparticles enhanced the in vitro hydroxyapatite-forming ability of bioactive glass composites. The presence of hBN nanoparticles accelerated the drug release rates of the system. It was concluded that bioactive glass/hBN composite scaffolds mimicking native bone tissue could be used for bone tissue repair and regeneration applications.

Nanoarchitectonics of Indocyanine Green/Doxorubicin-Loaded Hydroxyl Boron Nitride Nanosheets for Chemophotothermal Therapy

Biocompatible hydroxylated boron nitride nanosheets were effectively loaded with indocyanine green and doxorubicin using successive assembly. The indocyanine green/doxorubicin-loaded hydroxyl boron nitride nanosheets (ICG/DOX@OH-BNNS) integrated photothermal therapy and chemotherapy into a single nano vehicle. It had been confirmed that ICG/DOX@OH-BNNS could produce reactive oxygen species and exhibit excellent photothermal effects and light-triggered faster DOX release with NIR laser irradiation. On the other hand, the fluorescence of DOX in ICG/DOX@OH-BNNS was also used for visualizing subcellular location. Compared with individual chemotherapy and photothermal therapy, the combined treatment of ICG/DOX@OH-BNNS could synergistically induce the apoptosis and death of A549 cells and suppress S180 tumor growth in vivo.

Hydrothermal Synthesis of β-Nb2ZnO6 Nanoparticles for Photocatalytic Degradation of Methyl Orange and Cytotoxicity Study

β-Nb₂ZnO₆ nanoparticles were synthesized by a hydrothermal process and calcined at two temperatures, 500 °C and 700 °C, and assigned as A and B, respectively. X-ray diffraction, together with transmission electron microscopy, revealed that the β-Nb₂ZnO₆ nanoparticles calcined at 700 °C (B) were more crystalline than the β-Nb₂ZnO₆ calcined at 500 °C (A) with both types of nanoparticles having an average size of approximately 100 nm. The physiochemical, photocatalytic, and cytotoxic activities of both types of β-Nb₂ZnO₆ nanoparticles (A and B) were examined. Interestingly, the photodegradation of methyl orange, used as a standard for environmental pollutants, was faster in the presence of the β-Nb₂ZnO₆ nanoparticles calcined at 500 °C (A) than in the presence of those calcined at 700 °C (B). Moreover, the cytotoxicity was evaluated against different types of cancer cells and the results indicated that both types of β-Nb₂ZnO₆ nanoparticles (A and B) exhibited high cytotoxicity against MCF-7 and HCT116 cells but low cytotoxicity against HeLa cells after 24 and 48 h of treatment. Overall, both products expressed similar EC₅₀ values on tested cell lines and high cytotoxicity after 72 h of treatment. As a photocatalyst, β-Nb₂ZnO₆ nanoparticles (A) could be utilized in different applications including the purification of the environment and water from specific pollutants. Further biological studies are required to determine the other potential impacts of utilizing β-Nb₂ZnO₆ nanoparticles in the biomedical application field.

Fabrication of hexagonal boron carbonitride nanoplates using for in vitro photodynamic therapy and chemo therapy

Carbon nanomaterials and boron nitride nanomaterials have been proved to be very potential for biomedical applications. However, as an analog of them, boron carbonitride nanomaterials are rarely reported in biomedical field. In this study, the fabrication of visible light-responsive boron carbonitride nanoplates (BCNNPs) and their application in photodynamic therapy and chemo therapy were demonstrated. BCNNPs with an average size of 46 nm were fabricated via hydrogen peroxide treatment from bulk BCN. Cytotoxicity tests showed that the as-prepared BCNNPs are biocompatible and have no cytotoxicity to human breast cancer cells and human hepatocyte carcinoma cells. After conjunction with doxorubicin and folic acid, the BCNNPs were adopted as a targeted drug carrier, presenting pH-responsive release and tumor-targeting property for chemo therapy. Moreover, under certain intensity of visible light irradiation (45 mW/cm²), the BCNNPs can generate reactive oxygen species including superoxide radical, hydroxyl radical and singlet oxygen, so that synergistic photodynamic/chemo therapy effects were achieved. This work may be a groundbreaking discovery for utilizing BCNNPs as photosensitizer for photodynamic therapy and drug carrier for chemo therapy.

Boron Nitride Nanosheets Can Induce Water Channels Across Lipid Bilayers Leading to Lysosomal Permeabilization

While the interaction between 2D materials and cells is of key importance to the development of nanomedicines and safe applications of nanotechnology, still little is known about the biological interactions of many emerging 2D materials. Here, an investigation of how hexagonal boron nitride (hBN) interacts with the cell membrane is carried out by combining molecular dynamics (MD), liquid-phase exfoliation, and in vitro imaging methods. MD simulations reveal that a sharp hBN wedge can penetrate a lipid bilayer and form a cross-membrane water channel along its exposed polar edges, while a round hBN sheet does not exhibit this behavior. It is hypothesized that such water channels can facilitate cross-membrane transport, with important consequences including lysosomal membrane permeabilization, an emerging mechanism of cellular toxicity that involves the release of cathepsin B and generation of radical oxygen species leading to cell apoptosis. To test this hypothesis, two types of hBN nanosheets, one with a rhomboidal, cornered morphology and one with a round morphology, are prepared, and human lung epithelial cells are exposed to both materials. The cornered hBN with lateral polar edges results in a dose-dependent cytotoxic effect, whereas round hBN does not cause significant toxicity, thus confirming our premise.

Converging 2D Nanomaterials and 3D Bioprinting Technology: State-of-the-Art, Challenges, and Potential Outlook in Biomedical Applications

The development of next-generation of bioinks aims to fabricate anatomical size 3D scaffold with high printability and biocompatibility. Along with the progress in 3D bioprinting, 2D nanomaterials (2D NMs) prove to be emerging frontiers in the development of advanced materials owing to their extraordinary properties. Harnessing the properties of 2D NMs in 3D bioprinting technologies can revolutionize the development of bioinks by endowing new functionalities to the current bioinks. First the main contributions of 2D NMS in 3D bioprinting technologies are categorized here into six main classes: 1) reinforcement effect, 2) delivery of bioactive molecules, 3) improved electrical conductivity, 4) enhanced tissue formation, 5) photothermal effect, 6) and stronger antibacterial properties. Next, the recent advances in the use of each certain 2D NMs (1) graphene, 2) nanosilicate, 3) black phosphorus, 4) MXene, 5) transition metal dichalcogenides, 6) hexagonal boron nitride, and 7) metal-organic frameworks) in 3D bioprinting technology are critically summarized and evaluated thoroughly. Third, the role of physicochemical properties of 2D NMSs on their cytotoxicity is uncovered, with several representative examples of each studied 2D NMs. Finally, current challenges, opportunities, and outlook for the development of nanocomposite bioinks are discussed thoroughly.

Polyaniline-Conjugated Boron Nitride Nanoparticles Exhibiting Potent Effects against Pathogenic Brain-Eating Amoebae

Free-living amoebae include Acanthamoeba castellanii and Naegleria fowleri that are opportunistic protozoa responsible for life-threatening central nervous system infections with mortality rates over 90%. The rising number of cases and high mortality rates are indicative of the critical unmet need for the development of efficient drugs in order to avert future deaths. In this study, we assess the anti-amoebic capacity of a conducting polymer nanocomposite comprising polyaniline (PANI) and hexagonal boron nitride (hBN) against A. castellanii and N. fowleri. We observed significant amoebicidal and cysticidal effects using 100 μg/mL PANI/hBN (P < 0.05). Further, the nanocomposite demonstrated negligible cytotoxicity toward HaCaT and primary human corneal epithelial cells (pHCECs). In evaluating the mode of inhibition of A. castellanii due to treatment with PANI/hBN, increased intracellular reactive oxygen species (ROS) was measured and scanning microscopy visualized the formation of pores in the amoebae. Overall, this study is suggestive of the potential of the PANI/hBN nanocomposite as a promising therapy for amoeba infections.

Methods of hexagonal boron nitride exfoliation and its functionalization: covalent and non-covalent approaches

The exfoliation of two-dimensional (2D) hexagonal boron nitride nanosheets (h-BNNSs) from bulk hexagonal boron nitride (h-BN) materials has received intense interest owing to their fascinating physical, chemical, and biological properties. Numerous exfoliation techniques offer scalable approaches for harvesting single-layer or few-layer h-BNNSs. Their structure is very comparable to graphite, and they have numerous significant applications owing to their superb thermal, electrical, optical, and mechanical performance. Exfoliation from bulk stacked h-BN is the most cost-effective way to obtain large quantities of few layer h-BN. Herein, numerous methods have been discussed to achieve the exfoliation of h-BN, each with advantages and disadvantages. Herein, we describe the existing exfoliation methods used to fabricate single-layer materials. Besides exfoliation methods, various functionalization methods, such as covalent, non-covalent, and Lewis acid-base approaches, including physical and chemical methods, are extensively described for the preparation of several h-BNNS derivatives. Moreover, the unique and potent characteristics of functionalized h-BNNSs, like enhanced solubility in water, improved thermal conductivity, stability, and excellent biocompatibility, lead to certain extensive applications in the areas of biomedical science, electronics, novel polymeric composites, and UV photodetectors, and these are also highlighted.

Antipathogenic properties and applications of low-dimensional materials

A major health concern of the 21st century is the rise of multi-drug resistant pathogenic microbial species. Recent technological advancements have led to considerable opportunities for low-dimensional materials (LDMs) as potential next-generation antimicrobials. LDMs have demonstrated antimicrobial behaviour towards a variety of pathogenic bacterial and fungal cells, due to their unique physicochemical properties. This review provides a critical assessment of current LDMs that have exhibited antimicrobial behaviour and their mechanism of action. Future design considerations and constraints in deploying LDMs for antimicrobial applications are discussed. It is envisioned that this review will guide future design parameters for LDM-based antimicrobial applications.

Stimulated Emission Depletion Spectroscopy of Color Centers in Hexagonal Boron Nitride

We demonstrate the use of Stimulated Emission Depletion (STED) spectroscopy to map the electron-optical-phonon sideband of the ground state of the radiative transition of color centers in hexagonal boron nitride emitting at 2.0-2.2 eV, with in-plane linear polarization. The measurements are compared to photoluminescence of excitation (PLE) spectra that maps the electron-optical-phonon sideband of the excited state. The main qualitative difference is a red-shift in the longitudinal optical phonon peak associated with E _1u symmetry at the zone center. We compare our results to theoretical work on different defect species in hBN and find they are consistent with a carbon-based defect.

Boron nitride nanosheets elicit significant hemolytic activity via destruction of red blood cell membranes

Boron nitride (BN) nanosheets have emerged as promising nanomaterials in a wide range of biomedical applications. Despite extensive studies on these bio-nano interfacial systems, the underlying molecular mechanisms remain elusive. In this study, we used hemolysis assays and morphology observations to demonstrate for the first time that BN nanosheets can cause damages to the red-blood-cell membranes, leading to significant hemolysis. Further molecular dynamics simulations revealed that BN nanosheets can penetrate into the cell membrane and also extract considerable amount of phospholipid molecules directly from the lipid bilayer. The potential of mean force calculations then showed that their penetration effect was thermodynamically favorable due to the strong attractive van der Waals interactions between BN nanosheets and phospholipids. Overall, these findings provided valuable insights into the interaction of BN nanosheets with cell membranes at the atomic level, which can help future de novo design of BN-based nanodevices with better biocompatibility.

Exploration of Free Energy Surface and Thermal Effects on Relative Population and Infrared Spectrum of the Be6B11- Flux-Ional Cluster

The starting point to understanding cluster properties is the putative global minimum and all the nearby local energy minima; however, locating them is computationally expensive and difficult. The relative populations and spectroscopic properties that are a function of temperature can be approximately computed by employing statistical thermodynamics. Here, we investigate entropy-driven isomers distribution on Be₆B₁₁⁻ clusters and the effect of temperature on their infrared spectroscopy and relative populations. We identify the vibration modes possessed by the cluster that significantly contribute to the zero-point energy. A couple of steps are considered for computing the temperature-dependent relative population: First, using a genetic algorithm coupled to density functional theory, we performed an extensive and systematic exploration of the potential/free energy surface of Be₆B₁₁⁻ clusters to locate the putative global minimum and elucidate the low-energy structures. Second, the relative populations’ temperature effects are determined by considering the thermodynamic properties and Boltzmann factors. The temperature-dependent relative populations show that the entropies and temperature are essential for determining the global minimum. We compute the temperature-dependent total infrared spectra employing the Boltzmann factor weighted sums of each isomer’s infrared spectrum and find that at finite temperature, the total infrared spectrum is composed of an admixture of infrared spectra that corresponds to the spectra of the lowest-energy structure and its isomers located at higher energies. The methodology and results describe the thermal effects in the relative population and the infrared spectra.

RBC membrane camouflaged boron nitride nanospheres for enhanced biocompatible performance

Boron nitride nanospheres (BNNS) have attracted increasing attention in many fields due to their unique physicochemical properties. Biomedical application of BNNS has also been explored recently. However, limited by the hydrophobicity and poor dispersity of BNNS, their biocompatible performance especially the in vivo biosafety has rarely been reported and is still unclear now. In this work, BNNS were firstly camouflaged with red blood cell membrane by physical extrusion (CM-BNNS). CM-BNNS were then incubated with cells as well as intravenously injected into the mice to uncover their potential in vitro and in vivo toxicity. Results were promising as CM-BNNS exhibited better dispersion and stability compared with pristine BNNS. In vitro data demonstrated the relatively enhanced biosafety of CM-BNNS. The red blood cell membrane coating endowed BNNS with markedly prolonged blood circulation and decreased accumulation in the lung. In addition, CM-BNNS showed no adverse effects on all the evaluated hematic parameters and tissues of treated mice at a dose of 10 mg/kg. Taken together, our work demonstrated the optimal biocompatibility of CM-BNNS and pave the way for their future biomedical applications.

Synthesis, Functionalization, and Bioapplications of Two-Dimensional Boron Nitride Nanomaterials

Two-dimensional boron nitride nanostructures (2D-BNNs) have been increasingly investigated for their applications in several scientific and technological areas. This considerable interest is due to their unique physicochemical properties, which include high hydrophobicity, heat and electrical insulation, resistance to oxidation, antioxidation capacity, thermal conductivity, high chemical stability, mechanical strength, and hydrogen storage capacity. They are also used as fillers, antibacterial agents, protective coating agents, lubricants, boron neutron capture therapy agents, nanocarriers for drug delivery, and for the receptor phase in chemosensors. The investigations for their use in medicine and biomedicine are very promising, including cancer therapy and wound healing. In this review, 2D-BNNs synthesis and their surface modification strategies, biocompatibility, and bioapplication studies are discussed. Finally, a perspective for the future use of these novel nanomaterials in the biomedical field is provided.

Charged Layered Boron Nitride-Nanoflake Membranes for Efficient Ion Separation and Water Purification

2D layered nanomaterials have attracted considerable attention for their potential for highly efficient separations, among other applications. Here, a 2D lamellar membrane synthesized using hexagonal boron nitride nanoflakes (h-BNF) for highly efficient ion separation is reported. The ion-rejection performance and the water permeance of the membrane as a function of the ionic radius, ion valance, and solution pH are investigated. The nonfunctionalized h-BNF membranes show excellent ion rejection for small sized salt ions as well as for anionic dyes (>97%) while maintaining a high water permeability, ≈1.0 × 10^-3 L m m^-2 h^-1 bar^-1 ). Experiments show that the ion-rejection performance of the membrane can be tuned by changing the solution pH. The results also suggest that the rejection is influenced by the ionic size and the electrostatic repulsion between fixed negative charges on the BN surface and the mobile ions, and is consistent with the Donnan equilibrium model. These simple-to-fabricate h-BNF membranes show a unique combination of excellent ion selectivity and high permeability compared to other 2D membranes.

Black phosphorus nanomaterials as multi-potent and emerging platforms against bacterial infections

Black phosphorus (BP) has attracted research interest due to its excellent physiochemical properties in various biomedical applications. However, challenges remain of establishing BP as a practical nanomaterial platform against bacterial infections caused by hard-to-treat pathogens. This review highlights the novel approaches for functional properties and advantages of BP over currently available two-dimensional nanomaterials for antibacterial activity. The latest research findings regarding BP for antibacterial activity, potential as alternative antibacterial approach to current antibiotics, and its promise for the future platform are also considered. We believe that our discussions and perspectives on current topics will provide researchers with an up-to-date and handy reference to apply BP as a beneficial nanostructured biomaterial to the human health against various bacterial infections.

Non-cytotoxic hydroxyl-functionalized exfoliated boron nitride nanoflakes impair the immunological function of insect haemocytes in vivo

To induce the water solubility of hexagonal boron nitride (h-BN), we exfoliated and functionalized bulk h-BN with hydroxyl groups (h-BN-OH-n). Short-term studies showed that h-BN-OH-n induced low cytotoxicity in different models: insect haemocytes (in vivo), human erythrocytes and mouse fibroblasts (in vitro). We also demonstrated that Alexa Fluor 647-h-BN-OH-n administered topically to the insects passed through the cuticle barrier and was phagocytosed by haemocytes. Nanoflakes did not affect the haemocyte cell membrane and did not interfere with the phagocytosis of latex beads. Long-term immunoassays showed that h-BN-OH-n, despite not inducing haemocytotoxicity, impaired nodulation, the most important cellular immune response in insects. The haemocytes exposed to h-BN-OH-n and then to bacteria differed in morphology and adhesiveness from the haemocytes exposed only to bacteria and exhibited the same morphology and adhesiveness as the control haemocytes. The h-BN-OH-n-induced decrease in nodulation can therefore result from the reduced ability of haemocytes to recognize bacteria, migrate to them or form microaggregates around them, which can lead to dysfunction of the immune system during pathogen infection. Long-term in vivo studies with animal models are still necessary to unambiguously confirm that h-BN is biocompatible and useful for application as a platform for drug delivery or for bioimaging.

Dual stimuli-responsive supramolecular boron nitride with tunable physical properties for controlled drug delivery

The new concept of modifying and tailoring the properties of existing two-dimensional (2D) nanomaterials by invoking the assembly of supramolecular networks upon association with a adenine-functionalized macromer (A-PPG) has significant potential to facilitate the development of highly water-dispersible few-layered 2D nanosheets. In this study, we propose that water-soluble A-PPG directly self-assembles into a long-period stacking-ordered lamellar structure over the surface of hexagonal boron nitride (BN) in aqueous solution, due to the efficient non-covalent interactions between A-PPG and BN nanosheets. The layer number of BN nanosheets can be easily tuned by altering the mass ratio of the A-PPG and BN blend, and the resulting exfoliated nanosheets also exhibit excellent temperature/pH-responsive behavior, biocompatibility and extremely high drug-loading capacity (up to 36.2%), features that are highly desirable yet exceedingly rare in traditional 2D nanomaterials. Importantly, in vitro drug release studies showed the drug-loaded nanosheets function as a stable nanocarrier with excellent stability and drug entrapment under normal physiological conditions. Increasing the environmental temperature to 40 °C or decreasing the pH to 5.5 triggered rapid release of the encapsulated drug from the drug-loaded nanosheets, suggesting this newly developed material has potential as a novel multi-responsive 2D nanocarrier to safely deliver drugs and effectively facilitate controlled drug release under specific microenvironmental conditions. This study provides new insight towards the promising application of this system in controlled release drug delivery systems.

Folate-conjugated, mesoporous silica functionalized boron nitride nanospheres for targeted delivery of doxorubicin

Biomedical application of boron nitride (BN) nanomaterials has recently attracted considerable attentions. BN nanospheres (BNNS) could safely deliver anti-cancer drug into tumor cells, which makes them potential nanocarrier for cancer therapy. However, the poor dispersity in physiological environments and low drug loading capacity severely limit their further applications. Herein, we developed a novel drug delivery system based on folate-conjugated mesoporous silica (MS)-functionalized BNNS (BNMS-FA). Dispersity and drug loading capacity of BNNS were highly improved by MS modification. BNMS-FA complexes were nontoxic up to a concentration of 100 μg/mL, and could be specifically internalized by HeLa and MCF-7 cells via folate receptor-mediated endocytosis. Doxorubicin (DOX) could be loaded onto BNMS-FA complexes with high efficiency via π-π stacking and hydrogen bonding, and showed a sustained release pattern under different pH conditions. BNMS-FA/DOX complexes exhibited superior drug internalization and antitumor efficacy over free DOX, BNNS/DOX and BNMS/DOX complexes, which were considered promising for targeted cancer therapy.

Fabrication and application of BN nanoparticles, nanosheets and their nanohybrids

Smart implementation of novel advanced nanomaterials is the key for the solution of many complex problems of modern science. In recent years, there has been a great interest in the synthesis and application of boron nitride (BN) nanotubes because of their unique physical, chemical, and mechanical properties. By contrast, the synthesis, characterization and exploration of other morphological types of BN nanostructure - BN nanoparticles and BN nanosheets - have received less attention. However, the detailed investigations on advantages of every morphological BN type for specific applications have only recently been started. One of the promising directions is the utilization of BN-based nanohybrids. This review is dedicated to the in-depth analysis of recently published works on the fabrication and application of BN nanoparticles, nanosheets, and their nanohybrids. It covers a variety of developed synthetic methods toward fabrication of such nanostructures, and their specific application potentials in catalysis, drug delivery, tribology and structural materials. Finally, the review focuses on the theoretical aspects of this quickly emerging field.

Hexagonal Boron Nitride Functionalized with Au Nanoparticles-Properties and Potential Biological Applications

Hexagonal boron nitride is often referred to as white graphene. This is a 2D layered material, with a structure similar to graphene. It has gained many applications in cosmetics, dental cements, ceramics etc. Hexagonal boron nitride is also used in medicine, as a drug carrier similar as graphene or graphene oxide. Here we report that this material can be exfoliated in two steps: chemical treatment (via modified Hummers method) followed by the sonication treatment. Afterwards, the surface of the obtained material can be efficiently functionalized with gold nanoparticles. The mitochondrial activity was not affected in L929 and MCF-7 cell line cultures during 24-h incubation, whereas longer incubation (for 48, and 72 h) with this nanocomposite affected the cellular metabolism. Lysosome functionality, analyzed using the NR uptake assay, was also reduced in both cell lines. Interestingly, the rate of MCF-7 cell proliferation was reduced when exposed to h-BN loaded with gold nanoparticles. It is believed that h-BN nanocomposite with gold nanoparticles is an attractive material for cancer drug delivery and photodynamic therapy in cancer killing.

Assessing and Mitigating the Hazard Potential of Two-Dimensional Materials

The family of two-dimensional (2D) materials is comprised of a continually expanding palette of unique compositions and properties with potential applications in electronics, optoelectronics, energy capture and storage, catalysis, and nanomedicine. To accelerate the implementation of 2D materials in widely disseminated technologies, human health and environmental implications need to be addressed. While extensive research has focused on assessing the toxicity and environmental fate of graphene and related carbon nanomaterials, the potential hazards of other 2D materials have only recently begun to be explored. Herein, the toxicity and environmental fate of postcarbon 2D materials, such as transition metal dichalcogenides, hexagonal boron nitride, and black phosphorus, are reviewed as a function of their preparation methods and surface functionalization. Specifically, we delineate how the hazard potential of 2D materials is directly related to structural parameters and physicochemical properties and how experimental design is critical to the accurate elucidation of the underlying toxicological mechanisms. Finally, a multidisciplinary approach for streamlining the hazard assessment of emerging 2D materials is outlined, thereby providing a pathway for accelerating their safe use in a range of technologically relevant contexts.

BNC nanoshells: a novel structure for atomic storage

Quantum molecular dynamics (QMD) and density functional theory are employed in this work in order to study the structural and electronic properties of carbon, boron nitride or hybrid BNC nanoshells. The studied nanoshells can be formed by stacking two zigzag graphene nanoribbons, two zigzag boron nitride nanoribbons or one zigzag graphene nanoribbon on a boron nitride nanoribbon. In all cases only one of the edges of the ribbon is passivated, while the other one is left unpassivated. Our QMD results show that these nanoribbons collapse just a few femtoseconds after the beginning of the simulation, forming a coalesced structure in the shape of a shell. Our band structure calculations revealed that this structures may be metallic or semiconductor, depending on its stoichiometry. Furthermore, a spin splitting for energies near the Fermi level is predicted for both the pure carbon and the hybrid BNC-nanoshell systems. We further show that when a transverse electric field is applied to these systems, the nanoshell structure tends to open up. This effect can lead to the application of these nanoshells for molecular storage. As a proof of concept, We investigate this storage effect for the H₂ molecule.

Design of Boron Nitride/Gelatin Electrospun Nanofibers for Bone Tissue Engineering

Gelatin is a biodegradable biopolymer obtained by collagen denaturation, which shows poor mechanical properties. Hence, improving its mechanical properties is very essential toward the fabrication of efficient nontoxic material for biomedical applications. For this aim, various methods are employed using external fillers such as ceramics or bioglass. In this report, we introduce boron nitride (BN)-reinforced gelatin as a new class of two-dimensional biocompatible nanomaterials. The effect of the nanofiller on the mechanical behavior is analyzed. BN is efficiently exfoliated using the biopolymer gelatin as shown through Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). The exfoliated BN reinforces gelatin electrospun fibers, which results in an increase in the Young's modulus. The Electrospun Mats (ESM) are stable after the glutaraldehyde cross-linking, and the fibrous morphology is preserved. The cross-linked gelatin/BN ESM is highly bioactive in forming bonelike hydroxyapatite as shown by scanning electron microscopy. Due to their enhanced mineralization ability, the cross-linked ESM have been tested on human bone cells (HOS osteosarcoma cell line). The cell attachment, proliferation, and biocompatibility results show that the ESM are nontoxic and biodegradable. The analysis of osteoblast gene expression and the measurement of alkaline phosphatase activity confirm that these materials are suitable for bone tissue engineering.

Hydrolyzed hexagonal boron nitride/polymer nanocomposites for transparent gas barrier film

A flexible thin gas barrier film formed by layer-by-layer (LBL) assembly has been studied. We propose for the first time that hexagonal boron nitride (h-BN) can be used in LBL assembly. When dispersed in water through sonication-assisted hydrolysis, h-BN develops hydroxyl groups that electrostatically couple with the cationic polymer polydiallyldimethylammonium chloride (PDDA). This process produces hydroxyl-functional h-BN/PDDA nanocomposites. The nanocomposites exhibit well exfoliated and highly ordered h-BN nanosheets, which results in an extremely high visual clarity, with an average transmittance of 99% in the visible spectrum. Moreover, well aligned nanocomposites extend gas diffusion path that reduce water vapor transmission rate to 1.3 × 10^-2 g m^-2 d^-1. The simple and fast LBL process demonstrated here can be applied in many gas barrier applications.

Two-dimensional transition metal dichalcogenide nanomaterials for combination cancer therapy

In this review, we mainly summarize the latest advances in the utilization of 2D TMDCs for PTT combination cancer therapy and imaging-guided cancer combination therapy, as well as their toxicity bothin vitroandin vivo.

Microwave-assisted rapid synthesis of graphene-analogue hexagonal boron nitride (h-BN) nanosheets and their application for the ultrafast and selective adsorption of cationic dyes from aqueous solutions

Graphene-analogue hexagonal boron nitride (h-BN) nanosheets are successfully synthesizedviaa facile and fast microwave-assisted method in 10 min and used as a novel adsorbent for the ultrafast removal of cationic organic dyes in aqueous solution.

The release of hydrogen from ammonia borane over copper/hexagonal boron nitride composites

Facile solution-phase synthesis of copper nanoparticles dispersed on h-BN via a solvothermal method is proposed for hydrolytic dehydrogenation of ammonia borane.