Inhalation of poorly soluble particles. II. Influence Of particle surface area on inflammation and clearance

Comparative toxicity study of three surface-modified titanium dioxide nanoparticles following subacute inhalation

BACKGROUND

This study aimed to compare the toxic effects of three different titanium dioxide nanoparticles encoded in the European nanomaterial repository as NM-103 (rutile, hydrophobic), NM-104 (rutile, hydrophilic), and NM-105 (anatase/rutile, hydrophilic), suggesting different toxic potentials after uptake in the lungs. Wistar rats were exposed by nose-only inhalation to aerosol concentrations of 3, 12 and 48 mg/m3 for 4 weeks. This dosing scheme should induce non, partial and complete lung overload. The 4-week inhalation period was followed by 3-, 45- and 94-day exposure-free periods. Investigations according to the OECD 412 guideline were performed. Additional examinations, such as transmission electron microscopy and image analysis of tissue slides and cytospots, were performed to reveal possible differences among the three particle types.

RESULTS

Bronchoalveolar lavage fluid from the groups exposed to low concentrations of NM-103 or NM-104 presented slight inflammation. In the mid- and high-exposure groups, this was also present for the NM-105 group, however, weaker than those of NM-103 and NM-104. Histologically, all three groups presented similar distributions of particles in the respiratory tract. Although marginal differences in the degree of some changes exist, no obvious differences in the degree or characteristics of the induced lesions were observable. In general, compared with the higher exposure groups, all the middle exposure groups presented a greater accumulation and aggregation of macrophages at the terminal bronchi. Using transmission electron microscopy, particles were detected mainly in intraalveolar macrophages, followed by type 1 pneumocytes in the low- and mid-concentration groups and intraalveolar free particles in the high-concentration groups. Compared with the other groups, the NM-103 group presented greater numbers of free particles in the alveoli and fewer in the macrophages. With image analysis, the movement of particles to the bronchus-associated lymphoid tissue and lymph nodes could be detected comparably for the three different particle types.

CONCLUSIONS

The no observed adverse effect concentration was 3 mg/m3 for all three different TiO2 particles. Despite minimal differences, a ranking mainly based on granulocyte influx into the lung was NM-104 > NM-103 > NM-105.

Is pulmonary inflammation a valid predictor of particle induced lung pathology? The case of amorphous and crystalline silicas

Although inflammation is a normal and beneficial response, it is also a key event in the pathology of many chronic diseases, including pulmonary and systemic particle-induced disease. In addition, inflammation is now considered as the key response in standard settings for inhaled particles and a critical endpoint in OECD-based sub-acute/ chronic animal inhalation testing protocols. In this paper, we discuss that whilst the role of inflammation in lung disease is undeniable, it is when inflammation deviates from normal parameters that adversity occurs. We introduce the importance of the time course and in particular, the reversibility of inflammation in the progression towards tissue remodelling and neoplastic changes as commonly seen in rat inhalation studies. For this purpose, we used sub-chronic/ chronic studies studies with synthetic amorphous silicas (SAS) and reactive crystalline silica (RCS) as a source of data to describe the time-course of inflammation towards and beyond adversity. Whilst amorphous silicas induce an acute but reversible inflammatory response, only RCS induces a persistent, progressive response after cessation of exposure, resulting in fibrosis and carcinogenicity in rodents and humans. This suggests that the use of inflammation as a fixed endpoint at the cessation of exposure may not be a reliable predictor of particle-induced lung pathology. We therefore suggest extending the current OECD testing guidelines with a recovery period, that allows inflammation to resolve or progress into altered structure and function, such as fibrosis.

Transcriptome changes in humans acutely exposed to nanoparticles during grinding of dental nanocomposites

Aim: Today, there is a lack of research studies concerning human acute exposure to nanoparticles (NPs). Our investigation aimed to simulate real-world acute inhalation exposure to NPs released during work with dental nanocomposites in a dental office or technician laboratory. Methods: Blood samples from female volunteers were processed before and after inhalation exposure. Transcriptomic mRNA and miRNA expression changes were analyzed. Results: We detected large interindividual variability, 90 significantly deregulated mRNAs, and 4 miRNAs when samples of participants before and after dental nanocomposite grinding were compared. Conclusion: The results suggest that inhaled dental NPs may present an occupational hazard to human health, as indicated by the changes in the processes related to oxidative stress, synthesis of eicosanoids, and cell division.

Modular air-liquid interface aerosol exposure system (MALIES) to study toxicity of nanoparticle aerosols in 3D-cultured A549 cells in vitro

We present a novel lung aerosol exposure system named MALIES (modular air-liquid interface exposure system), which allows three-dimensional cultivation of lung epithelial cells in alveolar-like scaffolds (MatriGrids®) and exposure to nanoparticle aerosols. MALIES consists of multiple modular units for aerosol generation, and can be rapidly assembled and commissioned. The MALIES system was proven for its ability to reliably produce a dose-dependent toxicity in A549 cells using CuSO4 aerosol. Cytotoxic effects of BaSO4- and TiO2-nanoparticles were investigated using MALIES with the human lung tumor cell line A549 cultured at the air-liquid interface. Experiments with concentrations of up to 5.93 × 105 (BaSO4) and 1.49 × 106 (TiO2) particles/cm3, resulting in deposited masses of up to 26.6 and 74.0 µg/cm2 were performed using two identical aerosol exposure systems in two different laboratories. LDH, resazurin reduction and total glutathione were measured. A549 cells grown on MatriGrids® form a ZO-1- and E-Cadherin-positive epithelial barrier and produce mucin and surfactant protein. BaSO4-NP in a deposited mass of up to 26.6 µg/cm2 resulted in mild, reversible damage (~ 10% decrease in viability) to lung epithelium 24 h after exposure. TiO2-NP in a deposited mass of up to 74.0 µg/cm2 did not induce any cytotoxicity in A549 cells 24 h and 72 h after exposure, with the exception of a 1.7 fold increase in the low exposure group in laboratory 1. These results are consistent with previous studies showing no significant damage to lung epithelium by short-term treatment with low concentrations of nanoscale BaSO4 and TiO2 in in vitro experiments.

The impact of coal mine dust characteristics on pathways to respiratory harm: investigating the pneumoconiotic potency of coals

Exposure to dust from the mining environment has historically resulted in epidemic levels of mortality and morbidity from pneumoconiotic diseases such as silicosis, coal workers' pneumoconiosis (CWP), and asbestosis. Studies have shown that CWP remains a critical issue at collieries across the globe, with some countries facing resurgent patterns of the disease and additional pathologies from long-term exposure. Compliance measures to reduce dust exposure rely primarily on the assumption that all "fine" particles are equally toxic irrespective of source or chemical composition. For several ore types, but more specifically coal, such an assumption is not practical due to the complex and highly variable nature of the material. Additionally, several studies have identified possible mechanisms of pathogenesis from the minerals and deleterious metals in coal. The purpose of this review was to provide a reassessment of the perspectives and strategies used to evaluate the pneumoconiotic potency of coal mine dust. Emphasis is on the physicochemical characteristics of coal mine dust such as mineralogy/mineral chemistry, particle shape, size, specific surface area, and free surface area-all of which have been highlighted as contributing factors to the expression of pro-inflammatory responses in the lung. The review also highlights the potential opportunity for more holistic risk characterisation strategies for coal mine dust, which consider the mineralogical and physicochemical aspects of the dust as variables relevant to the current proposed mechanisms for CWP pathogenesis.

Human Exposure to Microplastics and Its Associated Health Risks

Microplastics are a globally emerging contaminant in the environment, but little is known about the potential risks of microplastics to human health. Possible exposure routes of microplastics to humans include ingestion, inhalation, and dermal penetration, with the last of these needing equal attention as the other two main routes. Evidence showed the presence of microplastics in human-derived biological samples (i.e., excrement, biofluids, and tissues). Most of the toxicological studies of microplastics on humans were based on laboratory rodents and human-derived cells. Energy homeostasis, intestinal microflora, and the reproductive, immune, and nervous systems were regarded as targets of microplastics. The toxicity of microplastics on microstructures including lysosomes, mitochondria, endoplasmic reticulum, and the nucleus further revealed the potential risks of microplastics on human health at the cellular levels. As a carrier, microplastics also had the potential to magnify the toxicity of other contaminants in the environment (e.g., plasticizer, metals, antibiotics, and microorganisms). Studies of microplastics at environmentally realistic conditions are still in their infancy with many unsolved questions to predict their risks on human health.

Microplastics in the Bronchoalveolar Lavage Fluid of Chinese Children: Associations with Age, City Development, and Disease Features

This study characterized the occurrence patterns of microplastics (MPs) in the bronchoalveolar lavage fluid (BALF) of children with pulmonary diseases. MPs were detected in 89.6% of BALF samples with an average of 4.31 ± 2.77 items/10 mL, supporting the hypothesis that inhalation is a significant pathway of airborne MP exposure to pediatric lungs. Inhaled MPs were predominantly composed of 10 polymer types [e.g., polypropylene (41.9%), polyethylene (19.4%), and polyester (13.6%)], with the majority being smaller than 20 μm. MP levels in BALF exhibited a negative correlation with children's age, probably owing to the preferential crawling and tumbling actions in indoor environments and underdeveloped immune systems of young children. Participants living in urban areas suffered from higher pulmonary MP exposure, likely due to higher environmental levels, compared with suburban/rural residents (P < 0.05). Although no significant differences were found between MP levels in pediatric lungs with community-acquired pneumonia (CAP) and asthma (P > 0.05), the severe CAP group displayed significantly higher MP contamination than the nonsevere group (P < 0.05), indicating that some yet undiscovered relationship(s) between inhaled MPs and pediatric pulmonary diseases may exist.

Metal Nanoparticles in Alzheimer's Disease

Nanotechnology has emerged in different fields of biomedical application, including lifestyle diseases like diabetes, hypertension, and chronic kidney disease, neurodegenerative diseases like Alzheimer's disease (AD), Parkinson's disease, and different types of cancers. Metal nanoparticles are one of the most used drug delivery systems due to the benefits of their enhanced physicochemical properties as compared to bulk metals. Neurodegenerative diseases are the second most cause affecting mortality worldwide after cancer. Hence, they require the most specific and targeted drug delivery systems for maximum therapeutic benefits. Metal nanoparticles are the preferred drug delivery system, possessing greater blood-brain barrier permeability, biocompatibility, and enhanced bioavailability. But some metal nanoparticles exhibit neurotoxic activity owing to their shape, size, surface charge, or surface modification. This review article has discussed the pathophysiology of AD. The neuroprotective mechanism of gold, silver, selenium, ruthenium, cerium oxide, zinc oxide, and iron oxide nanoparticles are discussed. Again, the neurotoxic mechanisms of gold, iron oxide, titanium dioxide, and cobalt oxide are also included. The neuroprotective and neurotoxic effects of nanoparticles targeted for treating AD are discussed elaborately. The review also focusses on the biocompatibility of metal nanoparticles for targeting the brain in treating AD. The clinical trials and the requirement to develop new drug delivery systems are critically analyzed. This review can show a path for the researchers involved in the brain-targeted drug delivery for AD.

Assessment of primary and inflammation-driven genotoxicity of carbon black nanoparticles in vitro and in vivo

Carbon black nanoparticles (CBNPs) have a large surface area/volume ratio and are known to generate oxidative stress and inflammation that may result in genotoxicity and cancer. Here, we evaluated the primary and inflammatory response-driven (i.e. secondary) genotoxicity of two CBNPs, Flammruss101 (FL101) and PrintexXE2B (XE2B) that differ in size and specific surface area (SSA), and cause different amounts of reactive oxygen species. Three doses (low, medium and high) of FL101 and XE2B were assessed in vitro in the lung epithelial (A549) and activated THP-1 (THP-1a) monocytic cells exposed in submerged conditions for 6 and 24 h, and in C57BL/6 mice at day 1, 28 and 90 following intratracheal instillation. In vitro, we assessed pro-inflammatory response as IL-8 and IL-1β gene expression, and in vivo, inflammation was determined as inflammatory cell infiltrates in bronchial lavage (BAL) fluid and as histological changes in lung tissue. DNA damage was quantified in vitro and in vivo as DNA strand breaks levels by the alkaline comet assay. Inflammatory responses in vitro and in vivo correlated with dosed CBNPs SSA. Both materials induced DNA damage in THP-1a (correlated with dosed mass), and only XE2B in A549 cells. Non-statistically significant increase in DNA damage in vivo was observed in BAL cells. In conclusion, this study shows dosed SSA predicted inflammation both in vivo and in vitro, whereas dosed mass predicted genotoxicity in vitro in THP-1a cells. The observed lack of correlation between CBNP surface area and genotoxicity provides little evidence of inflammation-driven genotoxicity in vivo and in vitro.

Macrophage-mediated tissue response evoked by subchronic inhalation of lead oxide nanoparticles is associated with the alteration of phospholipases C and cholesterol transporters

Background

Inhalation of lead oxide nanoparticles (PbO NPs), which are emitted to the environment by high-temperature technological processes, heavily impairs target organs. These nanoparticles pass through the lung barrier and are distributed via the blood into secondary target organs, where they cause numerous pathological alterations. Here, we studied in detail, macrophages as specialized cells involved in the innate and adaptive immune response in selected target organs to unravel their potential involvement in reaction to subchronic PbO NP inhalation. In this context, we also tackled possible alterations in lipid uptake in the lungs and liver, which is usually associated with foam macrophage formation.

Results

The histopathological analysis of PbO NP exposed lung revealed serious chronic inflammation of lung tissues. The number of total and foam macrophages was significantly increased in lung, and they contained numerous cholesterol crystals. PbO NP inhalation induced changes in expression of phospholipases C (PLC) as enzymes linked to macrophage-mediated inflammation in lungs. In the liver, the subchronic inhalation of PbO NPs caused predominantly hyperemia, microsteatosis or remodeling of the liver parenchyma, and the number of liver macrophages also significantly was increased. The gene and protein expression of a cholesterol transporter CD36, which is associated with lipid metabolism, was altered in the liver. The amount of selected cholesteryl esters (CE 16:0, CE 18:1, CE 20:4, CE 22:6) in liver tissue was decreased after subchronic PbO NP inhalation, while total and free cholesterol in liver tissue was slightly increased. Gene and protein expression of phospholipase PLCβ1 and receptor CD36 in human hepatocytes were affected also in in vitro experiments after acute PbO NP exposure. No microscopic or serious functional kidney alterations were detected after subchronic PbO NP exposure and CD68 positive cells were present in the physiological mode in its interstitial tissues.

Conclusion

Our study revealed the association of increased cholesterol and lipid storage in targeted tissues with the alteration of scavenger receptors and phospholipases C after subchronic inhalation of PbO NPs and yet uncovered processes, which can contribute to steatosis in liver after metal nanoparticles exposure.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-022-00494-7.

Micro(nano)plastics pollution and human health: How plastics can induce carcinogenesis to humans?

Microplastics (MPs) and nanoplastics (NPs) are key indicators of the plasticine era, widely spread across different ecosystems. MPs and NPs become global stressors due to their inherent physicochemical characteristics and potential impact on ecosystems and humans. MPs and NPs have been exposed to humans via various pathways, such as tap water, bottled water, seafood, beverages, milk, fish, salts, fruits, and vegetables. This paper highlights MPs and NPs pathways to the food chains and how these plastic particles can cause risks to human health. MPs have been evident in vivo and vitro and have been at health risks, such as respiratory, immune, reproductive, and digestive systems. The present work emphasizes how various MPs and NPs, and associated toxic chemicals, such as polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), impact human health. Polystyrene (PS) and polyvinyl chloride (PVC) are common MPs and NPs, reported in human implants via ingestion, inhalation, and dermal exposure, which can cause carcinogenesis, according to Agency for Toxic Substances and Disease Registry (ATSDR) reports. Inhalation, ingestion, and dermal exposure-response cause genotoxicity, cell division and viability, cytotoxicity, oxidative stress induction, metabolism disruption, DNA damage, inflammation, and immunological responses in humans. Lastly, this review work concluded with current knowledge on potential risks to human health and knowledge gaps with recommendations for further investigation in this field.

Science With Purpose: 50 Years of the Institute of Occupational Medicine

The Institute of Occupational Medicine (IOM) was founded in 1969 by the then UK National Coal Board to complete its nation-wide epidemiological study of lung disease in coal miners, the Pneumoconiosis Field Research. The results quantified risks in the industry and were influential across the world in setting preventive standards. The research, based on epidemiology, was multidisciplinary from the start, and the IOM's broad scientific expertise was applied across many other industries with an increasing focus on environmental measurement and ergonomics. In 1990, as the coal industry declined, IOM became a self-funding research charity with a strong commercial arm. It has expanded its research, often with European collaborators and funding from governments, and has achieved wide recognition. This has most recently been applied during the pandemic in areas of hospital ventilation, personal protection, and viral exposure research, illustrating IOM's ability to respond to new environmental or occupational challenges.

Teratological effects of titanium dioxide nanoparticles in mice embryo

Nanoparticles have numerous applications related to human uses. Titanium dioxide nanoparticles (TiO₂-NPs) are extensively used in many daily utilities. The small size particles and larger uses in the industry have led them to become a threatening entity to the living organisms. The unchecked use and dumping in the environment poses a significant toxicological risk to the developing mammalian embryo. The present study was conducted to determine the developmental toxicity and teratogenic effects of TiO₂-NPs in murine embryos. The TiO₂-NPs were introduced intravenously into pregnant mice graded as T1 (0.52 mg/g BW), T2 (0.7 mg/g BW), and T3 (1.05 mg/g BW) along with control with no dose administration T0 (0.00 mg/g BW). Results recorded after 14 days were resorbed fetuses, dropped wrist, hemorrhages, sacral hygromas, and kinked tails. It was concluded that the exposure of TiO₂-NPs in mentioned doses from any source may lead to deleterious effects on the development of an embryo.

Inhaled tire-wear microplastic particles induced pulmonary fibrotic injury via epithelial cytoskeleton rearrangement

Tire wear microplastic particles (TWMPs) are emerging microplastic pollutants that have gained increasing attention lately. However, the health effect of inhaled airborne TWMPs has never been explored before and may already be included in particulate matter morbidity and mortality. Here, we endeavored to address the preliminary study of TWMP inhalation-induced pulmonary toxic effects and its epigenetic mechanisms in C57BL/6 mice. As a result, restricted ventilatory dysfunction and fibrotic pathological changes were observed in TWMP-treaded mice. Further research found that attenuation of miR-1a-3p plays an important role in TWMP-induced lung injury. Results from in vitro study confirmed that cytoskeleton regulatory gene twinfilin-1 was one of the target genes of miR-1a-3p, and involved in cytoskeleton rearrangement caused by TWMP exposure. Mechanistically, miR-1a-3p inhibited the F-actin formation by targeting cytoskeletal regulatory proteins twinfilin-1, leading to TWMP-induced pulmonary fibrotic injury. While we are in the very early stages of explaining the role of epigenetics in TWMP-induced lung injury, the potential for the use of epigenetic marks as biomarkers is high and discoveries made in this field will likely bring us closer to better understanding this crucial mechanism.

Possibilities to group nanomaterials across different substances - A case study on organic pigments

Grouping concepts to reduce the testing of NFs have been developed for regulatory purposes for different forms of the same substance. Here we explore possibilities to group nanomaterials across different substances for non-regulatory applications, using the example of 16 organic pigments from six chemical classes. Organic pigments are particles consisting of low-molar-mass organic molecules, and rank by tonnage among the most important substances manufactured in nanoform (NF). Tiered testing strategies relevant to the inhalation route included Tier 1 (deposition, dissolution, reactivity, inflammation) and if available Tier 3 data (in vivo). A similarity assessment of the pigment NF data was conducted in a quantitative (Tier 1 and Tier 3 in vivo potency) or qualitative (Tier 3 in vivo effects) manner. We observed that chemical similarity of organic pigments was predictive for their similarity of reactivity and dissolution, but that additional NF descriptors such as surface area or size, modulate the similarity in inflammation or cytotoxicity. We applied the concept of biologically relevant ranges to crop the values of the Tier 1 data matrix before applying similarity algorithms. The Tier 3 assessment by in vivo inhalation confirmed the IATA methodical choices and IATA assessment criteria as consistent and conservative. We suggested limits of acceptable similarity for Tier 1 data and demonstrated their application to support the grouping of some candidate NFs (subsequently confirmed by Tier 3 data). Four candidate NFs exceeded the limits of acceptability for Tier 1 and were escalated from Tier 1 to Tier 3, but were then included in the group, demonstrating the conservative Tier 1 criteria. The resulting group of low-solubility, low-reactivity materials included both NFs and non-NFs of various substances, and could find use for risk management purposes in the occupational handling of pigment powders.

The parallels between particle induced lung overload and particle induced periprosthetic osteolysis (PPOL)

Background: When particles deposit for instance in the lung after inhalation or in the hip joint after local release from a hip implant material they can initiate a defense response. Even though these particles originate from inert materials such as polyethylene (PE) or titanium, they may cause harm when reaching high local doses and overwhelming local defense mechanisms. Main body: This paper describes the parallels between adverse outcome pathways (AOP) and particle properties in lung overload and periprosthetic osteolysis (PPOL). It is noted that in both outcomes in different organs , the macrophage and cytokine orchestrated persistent inflammation is the common driver of events, in the bone leading to loss of bone density and structure, and in the lung leading to fibrosis and cancer. Most evidence on lung overload and its AOP is derived from chronic inhalation studies in rats, and the relevance to man is questioned. In PPOL, the paradigms and metrics are based on human clinical data, with additional insights generated from in vitro and animal studies. In both organ pathologies the total volume of particle deposition has been used to set threshold values for the onset of pathological alterations. The estimated clinical threshold for PPOL of 130 mg/ml is much higher than the amount to cause lung overload in the rat (10 mg/ml),although the threshold in PPOL is not necessarily synonymous to particle overload. Conclusions: The paradigms developed in two very different areas of particle response in the human body have major similarities in their AOP. Connecting the clinical evidence in PPOL to lung overload challenges relevance of rat inhalation studies to the human lung cancer hazard. .

Electric charge of atmospheric nanoparticles and its potential implications with human health

This research presents a pilot project developed within the framework of the COST Action 15,211 in which atmospheric nanoparticles were measured in July 2018, in a maritime environment in the city of Santander in Northern Spain. ELPI® + (Electrical Low-Pressure Impactor) was used to measure nanoparticle properties (electric charge, number, size distribution and surface area) from 6 nm to 10,000 nm with 14 size channels. This study focused on the range between 6 and 380 nm. It considered atmospheric nanoparticle electric charge with surface area, deposited and number by size distribution at human respiratory tract regions in a standard person in Santander according to the human respiratory tract model of ICRP 94. An empirical distribution of nanoparticles deposited in the human respiratory tract model and its electric charge is presented for the city of Santander as the main output. Percentages of total and regional deposition in human respiratory tract model were calculated for the Atlantic climate. Nanoparticles have shown an alveolar surface area deposition plateau with a size distribution range between 6 nm to 150 nm. Negative charge of nanoparticles was clearly associated with primary atmospheric nanoparticles being mainly deposited in the alveolar region where a Brownian mechanism of deposition is predominant. We can demonstrate that electric charge may be a key element in explaining Brownian deposition of the smallest particles in the human respiratory tract and that it can be linked to theoretical positive and negative impacts on human health according to several biometeorological studies. To support our analysis, aerosol samples were characterized with transmission electron microscopy and Confocal Raman spectrometer to determinate morphology, size, chemical composition, and structure. The toxicological effects of the samples with the alveolar surface area had a greater deposition, remain to be studied.

Development and application of a health-based framework for informing regulatory action in relation to exposure of microplastic particles in California drinking water

Microplastics have been documented in drinking water, but their effects on human health from ingestion, or the concentrations at which those effects begin to manifest, are not established. Here, we report on the outcome of a virtual expert workshop conducted between October 2020 and October 2021 in which a comprehensive review of mammalian hazard studies was conducted. A key objective of this assessment was to evaluate the feasibility and confidence in deriving a human health-based threshold value to inform development of the State of California's monitoring and management strategy for microplastics in drinking water. A tiered approach was adopted to evaluate the quality and reliability of studies identified from a review of the peer-reviewed scientific literature. A total of 41 in vitro and 31 in vivo studies using mammals were identified and subjected to a Tier 1 screening and prioritization exercise, which was based on an evaluation of how each of the studies addressed various quality criteria. Prioritized studies were identified largely based on their application and reporting of dose-response relationships. Given that methods for extrapolating between in vitro and in vivo systems are currently lacking, only oral exposure in vivo studies were identified as fit-for-purpose within the context of this workshop. Twelve mammalian toxicity studies were prioritized and subjected to a Tier 2 qualitative evaluation by external experts. Of the 12 studies, 7 report adverse effects on male and female reproductive systems, while 5 reported effects on various other physiological endpoints. It is notable that the majority of studies (83%) subjected to Tier 2 evaluation report results from exposure to a single polymer type (polystyrene spheres), representing a size range of 0.040 to 20 µm. No single study met all desired quality criteria, but collectively toxicological effects with respect to biomarkers of inflammation and oxidative stress represented a consistent trend. While it was possible to derive a conservative screening level to inform monitoring activities, it was not possible to extrapolate a human-health-based threshold value for microplastics, which is largely due to concerns regarding the relative quality and reliability of current data, but also due to the inability to extrapolate data from studies using monodisperse plastic particles, such as polystyrene spheres to an environmentally relevant exposure of microplastics. Nevertheless, a conservative screening level value was used to estimate a volume of drinking water (1000 L) that could be used to support monitoring activities and improve our overall understanding of exposure in California's drinking water. In order to increase confidence in our ability to derive a human-health-based threshold value in the future, several research recommendations are provided, with an emphasis towards strengthening how toxicity studies should be conducted in the future and an improved understanding of human exposure to microplastics, insights critically important to better inform future risk assessments.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1186/s43591-022-00030-6.

Overview on the occurrence of microplastics in air and implications from the use of face masks during the COVID-19 pandemic

Environmental pollution from microplastics (MPs) in air is a matter of growing concern because of human health implications. Airborne MPs can be directly and continuously inhaled in air environments. Especially high MPs contributions can be found in indoor air due to the erosion and breakage of consumer, domestic and construction products, although there is little information available on their sources and concentrations and the risks they might pose. This is in part due to the fact that sampling and analysis of airborne MPs is a complex and multistep procedure where techniques used are not yet standardized. In this study, we provide an overview on the presence of MPs in indoor air, potential health impacts, the available methods for their sampling and detection and implications from the use of face masks during the COVID-19 pandemic.

Characterizing the multidimensionality of microplastics across environmental compartments

Understanding the multidimensionality of microplastics is essential for a realistic assessment of the risks these particles pose to the environment and human health. Here, we capture size, shape, area, polymer, volume and mass characteristics of >60,000 individual microplastic particles as continuous distributions. Particles originate from samples taken from different aquatic compartments, including surface water and sediments from the marine and freshwater environment, waste water effluents, and freshwater organisms. Data were obtained using state-of-the-art FTIR-imaging, using the same automated imaging post-processing software. We introduce a workflow with two quality criteria that assure minimum data quality loss due to volumetric and filter area subsampling. We find that probability density functions (PDFs) for particle length follow power law distributions, with median slopes ranging from 2.2 for marine surface water to 3.1 for biota samples, and that these slopes were compartment-specific. Polymer-specific PDFs for particle length demonstrated significant differences in slopes among polymers, hinting at polymer specific sources, removal or fragmentation processes. Furthermore, we provide PDFs for particle width, width to length ratio, area, specific surface area, volume and mass distributions and propose how these can represent the full diversity of toxicologically relevant dose metrics required for the assessment of microplastic risks.

Newly Emerging Airborne Pollutants: Current Knowledge of Health Impact of Micro and Nanoplastics

Plastics are ubiquitous persistent pollutants, forming the most representative material of the Anthropocene. In the environment, they undergo wear and tear (i.e., mechanical fragmentation, and slow photo and thermo-oxidative degradation) forming secondary microplastics (MPs). Further fragmentation of primary and secondary MPs results in nanoplastics (NPs). To assess potential health damage due to human exposure to airborne MPs and NPs, we summarize the evidence collected to date that, however, has almost completely focused on monitoring and the effects of airborne MPs. Only in vivo and in vitro studies have assessed the toxicity of NPs, and a standardized method for their analysis in environmental matrices is still missing. The main sources of indoor and outdoor exposure to these pollutants include synthetic textile fibers, rubber tires, upholstery and household furniture, and landfills. Although both MPs and NPs can reach the alveolar surface, the latter can pass into the bloodstream, overcoming the pulmonary epithelial barrier. Despite the low reactivity, the number of surface area atoms per unit mass is high in MPs and NPs, greatly enhancing the surface area for chemical reactions with bodily fluids and tissue in direct contact. This is proven in polyvinyl chloride (PVC) and flock workers, who are prone to persistent inflammatory stimulation, leading to pulmonary fibrosis or even carcinogenesis.

Toxicological Consequences of Titanium Dioxide Nanoparticles (TiO2NPs) and Their Jeopardy to Human Population

Titanium dioxide nanoparticles (TiO2 NPs) are the most produced nanomaterial for food additives, pigments, photocatalysis, and personal care products. These nanomaterials are at the forefront of rapidly developing indispensable nanotechnology. In all these nanomaterials, titanium dioxide (TiO2) is the most common nanomaterial which is being synthesized for many years. These nanoparticles of TiO2 are widely used at the commercial level, especially in cosmetic industries. High usage in such a way has increased the toxicological consequences of the human population. Several studies have shown that TiO2 NPs accumulated after oral exposure or inhalation in the alimentary canal, lungs, heart, liver, spleen, cardiac muscle, and kidneys. Additionally, in mice and rats, they disturb glucose and lipid homeostasis. Moreover, TiO2 nanoparticles primarily cause adverse reactions by inducing oxidative stress that leads to cell damage, inflammation, genotoxicity, and adverse immune responses. The form and level of destruction are strongly based on the physical and chemical properties of TiO2 nanoparticles, which administer their reactivity and bioavailability. Studies give indications that TiO2 NPs cause both DNA strand breaks and chromosomal damages. The effects of genotoxicity do not depend only on particle surface changes, size, and exposure route, but also relies on the duration of exposure. Most of these effects may be because of a very high dose of TiO2 NPs. Despite increased production and use, epidemiological data for TiO2 NPs is still missing. This review discusses previous research regarding the impact of TiO2 NP toxicity on human health and highlights areas that require further understanding in concern of jeopardy to the human population. This review is important to point out areas where extensive research is needed; thus, their possible impact on individual health should be investigated in more details.

Safe Nanoparticles: Are We There Yet?

The field of nanotechnology has grown over the last two decades and made the transition from the benchtop to applied technologies. Nanoscale-sized particles, or nanoparticles, have emerged as promising tools with broad applications in drug delivery, diagnostics, cosmetics and several other biological and non-biological areas. These advances lead to questions about nanoparticle safety. Despite considerable efforts to understand the toxicity and safety of these nanoparticles, many of these questions are not yet fully answered. Nevertheless, these efforts have identified several approaches to minimize and prevent nanoparticle toxicity to promote safer nanotechnology. This review summarizes our current knowledge on nanoparticles, their toxic effects, their interactions with mammalian cells and finally current approaches to minimizing their toxicity.

Carbon nanomaterial-derived lung burden analysis using UV-Vis spectrophotometry and proteinase K digestion

BACKGROUND

The quantification of nanomaterials accumulated in various organs is crucial in studying their toxicity and toxicokinetics. However, some types of nanomaterials, including carbon nanomaterials (CNMs), are difficult to quantify in a biological matrix. Therefore, developing improved methodologies for quantification of CNMs in vital organs is instrumental in their continued modification and application.

RESULTS

In this study, carbon black, nanodiamond, multi-walled carbon nanotube, carbon nanofiber, and graphene nanoplatelet were assembled and used as a panel of CNMs. All CNMs showed significant absorbance at 750 nm, while their bio-components showed minimal absorbance at this wavelength. Quantification of CNMs using their absorbance at 750 nm was shown to have more than 94% accuracy in all of the studied materials. Incubating proteinase K (PK) for 2 days with a mixture of lung tissue homogenates and CNMs showed an average recovery rate over 90%. The utility of this method was confirmed in a murine pharyngeal aspiration model using CNMs at 30 μg/mouse.

CONCLUSIONS

We developed an improved lung burden assay for CNMs with an accuracy > 94% and a recovery rate > 90% using PK digestion and UV-Vis spectrophotometry. This method can be applied to any nanomaterial with sufficient absorbance in the near-infrared band and can differentiate nanomaterials from elements in the body, as well as the soluble fraction of the nanomaterial. Furthermore, a combination of PK digestion and other instrumental analysis specific to the nanomaterial can be applied to organ burden analysis.

Determination of total and lung-deposited particle surface area concentrations, in central Athens, Greece

Numerous health studies have linked the exposure to particulate matter with adverse health effects, while there is an increasing scientific interest in the particle metrics of surface area (SA) and lung-deposited SA (LDSA) concentration. In the present study, two integrated SA estimation methods, both based on widely used instrumentation, were applied at an urban traffic environment in Athens for a 6-month period. The first estimation method used the size distribution by number to estimate SA (average SA₁ 669.3 ± 229.0 μm² cm^-3), while the second method used a simple inversion scheme that incorporates number and mass concentrations (average SA₂ 1627.9 ± 562.8 μm² cm^-3). In pairwise comparisons, SA₂ levels were found two times greater than the corresponding SA₁, but exhibited a strong correlation (r = 0.73). SA₁ and SA₂ concentrations correlated well with the traffic-related pollutants NO_x (r = 0.64 and 0.78) and equivalent black carbon (r = 0.53 and 0.51). The diurnal variation of SA₁ concentrations by size range indicated traffic as a major controlling factor. Estimated LDSA (53.9 μm² cm^-3 on average) concentrations were also clearly affected by anthropogenic emissions with more pronounced associations in the 0.01-0.4 μm range (r = 0.66 with NO_x and r = 0.65 with equivalent black carbon). Validating estimated LDSA through simultaneous measurements with a reference instrument revealed that the estimation method underestimates LDSA by a factor between 2 and 3, exhibiting, however, a high correlation (r = 0.79). Overall, the performance of estimation methods appear satisfactory and indicate that a trustworthy assessment of the temporal variability of SA and LDSA concentration metrics can be provided in real time, on the basis of relatively lower-cost instrumentation, especially in view of recent advances in particle sensing technologies.

Ultrafine particles in scanning sprays: a standardized examination of five powders used for dental reconstruction

Background

Intraoral matting sprays for chairside systems can release fine or ultrafine particles or nanoparticles at dentists’ workplaces and cause work-related health problems by inhalation exposure. Until now, little is known about the magnitude of the ultrafine fraction, when using these scanning sprays. Hence, more information is needed for workplace risk assessments in dental practices.

Methods

Five commonly used dental spray-powders were examined under standardized conditions. Ingredients were taken from the respective safety data sheet. Particle number-size distributions and total number concentrations were analyzed with a fast mobility particle sizer, and reported graphically as well as mean particle fractions smaller than 100 nm. Based on these measurements, risk assessments were conducted, and particle depositions in the lung were modelled.

Results

The mean fraction of particles smaller than 100 nm varied between 9 and 93% depending on the matting agent and mode of application of the intraoral scanning spray. Propellants can represent a large fraction of these particles. Titanium dioxide, pigment-suspensions, talcum and others particles, which can pose relevant health risks, were listed as ingredients of scanning sprays in safety data sheets. Nevertheless, the deposited fraction of hazardous particles in the lung of employees in dental practices seems to be small (15%) during this dental procedure.

Conclusions

Our results suggest that dentists’ personnel can be exposed to hazardous fine and ultrafine particles. Though extensive standardized measurements and systematic evaluation of safety data sheets were used for this study, they cannot sufficiently assess and categorize potential workplace-related health risks.

Nanotoxicity: a challenge for future medicine

Background/aim

Due to nanomaterials’ potential benefits for diagnosis and treatment, they are widely used in medical applications and personal care products. Interaction of nanomaterials, which are very small in size, with tissue, cell and microenvironment, can reveal harmful effects that cannot be created with chemically identical and larger counterparts in biological organisms. In this review, a challenge for future medicine, nanotoxicity of nanomaterials is discussed.

Materials and methods

A detailed review of related literature was performed and evaluated as per medical applications of nanomaterials their toxicity.

Results and conclusion

Most authors state “the only valid technology will be nanotechnology in the next era”; however, there is no consensus on the impact of this technology on humankind, environment and ecological balance. Studies dealing with the toxic effect of nanomaterials on human health have also varied with developing technology. Nanotoxicology studies such as in vivo-like on 3D human organs, cells, advanced genetic studies, and -omic approaches begin to replace conventional methods. Nanotoxicity and adverse effects of nanomaterials in exposed producers, industry workers, and patients make nanomaterials a double-edged sword for future medicine. In order to control and tackle related risks, regulation and legislations should be implemented, and researchers have to conduct joint multidisciplinary studies in various fields of medical sciences, nanotechnology, nanomedicine, and biomedical engineering.

Segregation of respirable dust for chemical and toxicological analyses

Respirable dust can pass beyond ciliated airways of the respiratory tract and influence adverse health effects. Health effects can be studied using samples generated from bulk dust segregation. Because previous segregation methods diverge from size-selection criteria of the international convention for respirable particles (ICRP), a method was developed to approximate the ICRP. The method was compared to an ideal sampler by measuring the sample collection bias. The comparison shows that the uncertainty due to the bias was 0.10 based on European Standard EN13205:2014 criteria, which indicates that the segregator effectively follows the ICRP. Respirable particle size distributions were confirmed by an aerodynamic particle sizer and by computer-controlled scanning electron microscopy. Consequently, a systematic way to generate respirable powders for health effects studies and chemical analyses was developed.

Exposure to Submicron Particles and Estimation of the Dose Received by Children in School and Non-School Environments

In the present study, the daily dose in terms of submicron particle surface area received by children attending schools located in three different areas (rural, suburban, and urban), characterized by different outdoor concentrations, was evaluated. For this purpose, the exposure to submicron particle concentration levels of the children were measured through a direct exposure assessment approach. In particular, measurements of particle number and lung-deposited surface area concentrations at “personal scale” of 60 children were performed through a handheld particle counter to obtain exposure data in the different microenvironments they resided. Such data were combined with the time–activity pattern data, characteristics of each child, and inhalation rates (related to the activity performed) to obtain the total daily dose in terms of particle surface area. The highest daily dose was estimated for children attending the schools located in the urban and suburban areas (>1000 mm2), whereas the lowest value was estimated for children attending the school located in a rural area (646 mm2). Non-school indoor environments were recognized as the most influential in terms of children’s exposure and, thus, of received dose (>70%), whereas school environments contribute not significantly to the children daily dose, with dose fractions of 15–19% for schools located in urban and suburban areas and just 6% for the rural one. Therefore, the study clearly demonstrates that, whatever the school location, the children daily dose cannot be determined on the basis of the exposures in outdoor or school environments, but a direct assessment able to investigate the exposure of children during indoor environment is essential.

Mechanism of Action of TiO2: Recommendations to Reduce Uncertainties Related to Carcinogenic Potential

The Risk Assessment Committee of the European Chemicals Agency issued an opinion on classifying titanium dioxide (TiO₂) as a suspected human carcinogen upon inhalation. Recent animal studies indicate that TiO₂ may be carcinogenic through the oral route. There is considerable uncertainty on the carcinogenicity of TiO₂, which may be decreased if its mechanism of action becomes clearer. Here we consider adverse outcome pathways and present the available information on each of the key events (KEs). Inhalation exposure to TiO₂ can induce lung tumors in rats via a mechanism that is also applicable to other poorly soluble, low-toxicity particles. To reduce uncertainties regarding human relevance, we recommend gathering information on earlier KEs such as oxidative stress in humans. For oral exposure, insufficient information is available to conclude whether TiO₂ can induce intestinal tumors. An oral carcinogenicity study with well-characterized (food-grade) TiO₂ is needed, including an assessment of toxicokinetics and early KEs.

Variability in the Clearance of Lead Oxide Nanoparticles Is Associated with Alteration of Specific Membrane Transporters

Lead oxide nanoparticles (PbONPs), upon their entry into the lungs via inhalation, induce structural changes in primary and secondary target organs. The fate and ultrastructural localization of PbONPs in organs is known to be dependent on the specific organ. Here, we focused on the differences in the ability to clear the inhaled PbONPs from secondary target organs and on molecular and cellular mechanisms contributing to nanoparticle removal. Mice were exposed to PbONPs in whole-body inhalation chambers. Clearance of ionic lead and PbONPs (Pb/PbONPs) from the lungs and liver was very effective, with the lead being almost completely eliminated from the lungs and the physiological state of the lung tissue conspicuously restored. Kidneys exposed to nanoparticles did not exhibit serious signs of damage; however, LA-ICP-MS uncovered a certain amount of lead located preferentially in the kidney cortex even after a clearance period. The concentration of lead in femurs, as representatives of the axial skeleton, was the highest among studied organs at all designated time points after PbONP exposure, and the clearance ability of lead from the femurs was very low in contrast to other organs. The organ-specific increase of ABC transporters expression (ABCG2 in lungs and ABCC3 in the liver) was observed in exposed animals, suggesting their involvement in removing Pb/PbONPs from tissues. Moreover, the expression of caveolins and clathrin displayed a tissue-specific response to lead exposure. Our results uncovered high variability among the organs in their ability to clear Pb/PbONPs and in the transporters involved in this process.

Predicting dissolution and transformation of inhaled nanoparticles in the lung using abiotic flow cells: The case of barium sulfate

Barium sulfate (BaSO₄) was considered to be poorly-soluble and of low toxicity, but BaSO₄ NM-220 showed a surprisingly short retention after intratracheal instillation in rat lungs, and incorporation of Ba within the bones. Here we show that static abiotic dissolution cannot rationalize this result, whereas two dynamic abiotic dissolution systems (one flow-through and one flow-by) indicated 50% dissolution after 5 to 6 days at non-saturating conditions regardless of flow orientation, which is close to the in vivo half-time of 9.6 days. Non-equilibrium conditions were thus essential to simulate in vivo biodissolution. Instead of shrinking from 32 nm to 23 nm (to match the mass loss to ions), TEM scans of particles retrieved from flow-cells showed an increase to 40 nm. Such transformation suggested either material transport through interfacial contact or Ostwald ripening at super-saturating conditions and was also observed in vivo inside macrophages by high-resolution TEM following 12 months inhalation exposure. The abiotic flow cells thus adequately predicted the overall pulmonary biopersistence of the particles that was mediated by non-equilibrium dissolution and recrystallization. The present methodology for dissolution and transformation fills a high priority gap in nanomaterial hazard assessment and is proposed for the implementation of grouping and read-across by dissolution rates.

Pulmonary toxicity in rats following inhalation exposure to poorly soluble particles: The issue of impaired clearance and the relevance for human health hazard and risk assessment

Intensive discussions are ongoing about the interpretation of pulmonary effects observed in rats exposed to poorly soluble particles. Alveolar clearance differs between rats and humans and becomes impaired in rats at higher exposure concentrations. Some have doubted the human relevance of toxic effects observed in rats under impaired clearance conditions and have suggested that experimental exposures should stay below concentrations inducing impaired clearance. However, for regulatory purposes, insight in potential health effects at relatively high concentrations is needed to fully understand the hazard. Many aspects of impaired particle clearance remain unclear, hampering human health hazard and risk assessment. For an adequate evaluation of the impact of impaired clearance on pulmonary toxicity, a clear definition of alveolar clearance is needed that enables to quantitatively relate the level of impairment to the induction of adverse pulmonary health effects. Also, information is needed on the mechanism of action and the appropriate dose metric for the pulmonary effects observed. In absence of these data, human hazard and risk assessment can only be performed in a pragmatic way. Unless available data clearly point out otherwise, rat pulmonary toxicity including lung inflammation and tumour formation, needs to be considered relevant for human hazard and risk assessment.

A risk assessment framework for self-management of poorly soluble low toxic nanomaterials

The safety of nanomaterials is still being debated and the risk should be assessed using the latest available information. As for poorly soluble low toxic (PSLT) nanomaterials, the US National Institute for Occupational Safety and Health estimated the occupational exposure limit (OEL) for titanium dioxide (TiO₂) based on a particle surface area (SA) metric. The Organisation for Economic Co-operation and Development (OECD) suggested a tiered exposure assessment approach. This article proposes a risk assessment framework for self-management of PSLT particles. Lung burden (described in SA units), which had positive correlation with low observed adverse effect levels for PSLT particles, is chosen as the dose metric. In-house OEL is determined for individual workplaces. For materials with limited data, we suggest evaluating in-house OEL by utilizing the no observed adverse effect level (NOAEL) for TiO₂, as a representative PSLT nanomaterial. As for the exposure assessment, workplace concentration is first measured with simple equipment (ex. optical particle counter, OPC), and respirator performance is taken into account if it is unavoidable as a last resort. This framework enables efficient risk assessment for PSLT particles by assuming worst cases for each step, and considering the particle characteristics and operational conditions in each workplace.

Skin toxicity of topically applied nanoparticles

Nowadays, nanoproducts have found numerous applications, allowing them to enter the human body in different ways. Skin is a major body organ that acts as the first-line barrier between the internal organs and external environment. Although the inhalation and ingestion of nanoparticles is more dangerous compared with skin exposure, there are noteworthy information gaps in skin exposure to nanoparticles that need much attention. Despite the few reviews in the literature on the cytotoxic effects of nanoparticles, no research has reviewed the clinical side effects of nanoparticles following topical admonition, including skin inflammation, skin cancer and genetic toxicity.

Toxicological status of nanoparticles: What we know and what we don't know

The field of nanotechnology has grown exponentially during the last few decades, due in part to the use of nanoparticles in many manufacturing processes, as well as their potential as clinical agents for treatment of diseases and for drug delivery. This has created several new avenues by which humans can be exposed to nanoparticles. Unfortunately, investigations assessing the toxicological impacts of nanoparticles (i.e. nanotoxicity), as well as their possible risks to human health and the environment, have not kept pace with the rapid rise in their use. This has created a gap-in-knowledge and a substantial need for more research. Studies are needed to help complete our understanding of the mechanisms of toxicity of nanoparticles, as well as the mechanisms mediating their distribution and accumulation in cells and tissues and their elimination from the body. This review summarizes our knowledge on nanoparticles, including their various applications, routes of exposure, their potential toxicity and risks to human health.

Characterizing risk assessments for the development of occupational exposure limits for engineered nanomaterials

The commercialization of engineered nanomaterials (ENMs) began in the early 2000's. Since then the number of commercial products and the number of workers potentially exposed to ENMs is growing, as is the need to evaluate and manage the potential health risks. Occupational exposure limits (OELs) have been developed for some of the first generation of ENMs. These OELs have been based on risk assessments that progressed from qualitative to quantitative as nanotoxicology data became available. In this paper, that progression is characterized. It traces OEL development through the qualitative approach of general groups of ENMs based primarily on read-across with other materials to quantitative risk assessments for nanoscale particles including titanium dioxide, carbon nanotubes and nanofibers, silver nanoparticles, and cellulose nanocrystals. These represent prototypic approaches to risk assessment and OEL development for ENMs. Such substance-by-substance efforts are not practical given the insufficient data for many ENMs that are currently being used or potentially entering commerce. Consequently, categorical approaches are emerging to group and rank ENMs by hazard and potential health risk. The strengths and limitations of these approaches are described, and future derivations and research needs are discussed. Critical needs in moving forward with understanding the health effects of the numerous EMNs include more standardized and accessible quantitative data on the toxicity and physicochemical properties of ENMs.

Toxicity of pristine and paint-embedded TiO2 nanomaterials

Little is known on the toxicity of nanomaterials in the user phase. Inclusion of nanomaterials in paints is a common nanotechnology application. This study focuses on the toxicity of dusts from sanding of paints containing nanomaterials. We compared the toxicity of titanium dioxide nanomaterials (TiO₂NMs) and dusts generated by sanding boards coated with paints with different amounts of two different types of uncoated TiO₂NMs (diameters:10.5 nm and 38 nm). Mice were intratracheally instilled with a single dose of 18, 54 and 162 µg of TiO₂NMs or 54, 162 and 486 µg of sanding dusts. At 1, 3 and 28 days post-instillation, we evaluated pulmonary inflammation, liver histology and DNA damage in lung and liver. Pulmonary exposure to both pristine TiO₂NMs and sanding dusts with different types of TiO₂NMs resulted in dose-dependently increased influx of neutrophils into the lung lumen. There was no difference between the sanding dusts from the two paints. For all exposures but not in vehicle controls, mild histological lesions were observed in the liver. Pulmonary exposure to pristine TiO₂NMs and paint dusts with TiO₂NMs caused similar type of histological lesions in the liver.

The impact of nanomaterial characteristics on inhalation toxicity

During the last few decades, nanotechnology has evolved into a success story, apparent from a steadily increasing number of scientific publications as well as a large number of applications based on engineered nanomaterials (ENMs). Its widespread uses suggest a high relevance for consumers, workers and the environment, hence justifying intensive investigations into ENM-related adverse effects as a prerequisite for nano-specific regulations. In particular, the inhalation of airborne ENMs, being assumed to represent the most hazardous type of human exposure to these kinds of particles, needs to be scrutinized. Due to an increased awareness of possible health effects, which have already been seen in the case of ultrafine particles (UFPs), research and regulatory measures have set in to identify and address toxic implications following their almost ubiquitous occurrence. Although ENM properties differ from those of the respective bulk materials, the available assessment protocols are often designed for the latter. Despite the large benefit ensuing from the application of nanotechnology, many issues related to ENM behavior and adverse effects are not fully understood or should be examined anew. The traditional hypothesis that ENMs exhibit different or additional hazards due to their "nano" size has been challenged in recent years and ENM categorization according to their properties and toxicity mechanisms has been proposed instead. This review summarizes the toxicological effects of inhaled ENMs identified to date, elucidating the modes of action which provoke different mechanisms in the respiratory tract and their resulting effects. By linking particular mechanisms and adverse effects to ENM properties, grouping of ENMs based on toxicity-related properties is supposed to facilitate toxicological risk assessment. As intensive studies are still required to identify these "ENM classes", the need for alternatives to animal studies is evident and advances in cell-based test systems for pulmonary research are presented here. We hope to encourage the ongoing discussion about ENM risks and to advocate the further development and practice of suitable testing and grouping methods.

In Vitro and In Vivo Short-Term Pulmonary Toxicity of Differently Sized Colloidal Amorphous SiO₂

In vitro prediction of inflammatory lung effects of well-dispersed nanomaterials is challenging. Here, the in vitro effects of four colloidal amorphous SiO₂ nanomaterials that differed only by their primary particle size (9, 15, 30, and 55 nm) were analyzed using the rat NR8383 alveolar macrophage (AM) assay. Data were compared to effects of single doses of 15 nm and 55 nm SiO₂ intratracheally instilled in rat lungs. In vitro, all four elicited the release of concentration-dependent lactate dehydrogenase, β-glucuronidase, and tumor necrosis factor alpha, and the two smaller materials also released H₂O₂. All effects were size-dependent. Since the colloidal SiO₂ remained well-dispersed in serum-free in vitro conditions, effective particle concentrations reaching the cells were estimated using different models. Evaluating the effective concentration–based in vitro effects using the Decision-making framework for the grouping and testing of nanomaterials, all four nanomaterials were assigned as “active.” This assignment and the size dependency of effects were consistent with the outcomes of intratracheal instillation studies and available short-term rat inhalation data for 15 nm SiO₂. The study confirms the applicability of the NR8383 AM assay to assessing colloidal SiO₂ but underlines the need to estimate and consider the effective concentration of such well-dispersed test materials.

Airborne microplastics: Consequences to human health?

Microplastics have recently been detected in atmospheric fallout in Greater Paris. Due to their small size, they can be inhaled and may induce lesions in the respiratory system dependent on individual susceptibility and particle properties. Even though airborne microplastics are a new topic, several observational studies have reported the inhalation of plastic fibers and particles, especially in exposed workers, often coursing with dyspnea caused by airway and interstitial inflammatory responses. Even though environmental concentrations are low, susceptible individuals may be at risk of developing similar lesions. To better understand airborne microplastics risk to human health, this work summarizes current knowledge with the intention of developing awareness and future research in this area.