The United States' contribution of plastic waste to land and ocean

Facile synthesis of recyclable polythioimidocarbonates via aromatization-driven alternating copolymerization of para-quinone methide and isothiocyanates

The efficient and controllable alternating copolymerization of para-Quinone Methide (p-QM) is rare and challenging. The aromatization-driven alternating copolymerization of p-QM with isothiocyanates is explored for the first time under mild conditions. In the presence of the key catalyst m-phthalic acid and the initiator TBD, the reaction can efficiently produce completely alternating polythioimidocarbonates with narrow molecular weight distributions and high molar mass (up to 103.6 kg mol-1). Experimental studies and DFT calculations suggest that m-phthalic acid plays a synergistic catalytic role. Remarkably, copolymers can be recycled back into monomers with excellent yields under vacuum at a temperature of 190 °C in just a few minutes without solvents or catalysts.

Microbial degradation of polypropylene microplastics and concomitant polyhydroxybutyrate production: An integrated bioremediation approach with metagenomic insights

The persistence of plastics, particularly polypropylene (PP), and their conversion into microplastics (MPs), specifically PP-MPs, have emerged as serious ecological threats to soil and aquatic environments. In the present study, we aimed to isolate a microbial consortium capable of degrading PP-MPs. The results revealed that three microbial consortia (CPP-KKU1, CPP-KKU2, and CPP-KKU3) exhibited the ability to degrade PP-MPs, achieving weight losses ranging from 11.6 ± 0.2 % to 17.8 ± 0.5 % after 30 days. Fourier transform infrared (FTIR) spectroscopy analysis confirmed the degradation through oxidation, as evidenced by the presence of new functional groups (-OH and -C=O). In particular, CPP-KKU3 showed the highest degradation efficiency, with scanning electron microscopy (SEM) analysis revealing surface cracking after treatment. Additionally, gas chromatography-mass spectrometry (GC-MS) analysis identified various intermediate compounds, including heterocyclic aromatic compounds, phenyl groups, methylthio derivatives, and ethoxycarbonyl derivatives, indicating complex biochemical processes that were likely mediated by microbial enzymes. Furthermore, polyhydroxybutyrate (PHB) production by these consortia was also investigated. The result showed that both CPP-KKU2 and CPP-KKU3 successfully produced PHB, with CPP-KKU3 demonstrating superior performance in terms of PP-MP degradation and PHB production. Metagenomic analysis of CPP-KKU3 revealed abundant carbohydrate-active enzymes (CAZymes), particularly glycosyl transferases and glycoside hydrolases, which are associated with MP digestion. This study presents a promising bioremediation approach that addresses plastic waste degradation and sustainable bioplastic production, offering a potential solution for environmental plastic pollution.

Temporal succession of marine microbes drives plastisphere community convergence in subtropical coastal waters

Marine plastic pollution is a pervasive environmental issue, with microplastics serving as novel substrates for microbial colonization in aquatic ecosystems. This study investigates the succession of plastisphere communities on four common plastic types (polyethylene, polypropylene, polyethylene terephthalate, and polystyrene) in subtropical coastal waters of Hong Kong SAR. Over a 42-day period, we analysed the temporal development of microbial communities using a three-domain universal metabarcoding method. Our results reveal that temporal succession is a stronger driver of community structure than plastic type, with prokaryotic communities converging across different plastics as biofilms mature. Despite this convergence, plastisphere communities remain distinct from planktonic communities throughout the experiment, suggesting that plastics create unique ecological niches in marine environments. We observed differences in diversity patterns and community composition among prokaryotic, eukaryotic, and chloroplastic communities, highlighting the importance of multi-domain analyses in plastisphere research. Functional predictions suggest potential roles of prokaryotic communities in biogeochemical cycling and possible pathogenicity, highlighting the ecological and public health implications of plastisphere formation. This study provides valuable insights into the dynamics of microbial colonization across domains on marine plastics and enhances our understanding of how these anthropogenic substrates influence microbial ecology in marine ecosystems.

The abundance and analytical characterization of microplastics in the surface water of Haryana, India

Microplastic (MP) contamination has become a serious environmental concern that affects terrestrial environments, aquatic ecosystems, and human health. The current study assesses the presence, abundance, and morphology of MPs present in the surface water of Rohtak district, Haryana, India, which is rapidly undergoing industrialization. While the morphological studies of MPs were conducted through stereo microscopy and field emission-scanning electron microscopy (FE-SEM), the elemental composition of polymers was analyzed through attenuated total reflectance-Fourier transform infrared (ATR-FTIR). The results revealed that the surface water was significantly contaminated by polyethylene, polypropylene, and polystyrene. Moreover, the abundance of MPs was found to be 16-28 particles/L with an average value of 23 particles/L. Most of the MPs had fibrous morphology with the specifics being, fibers (43.9%), fragments (23.7%), films (17%), and pellets (15.4%). The MPs exhibited a size range of 0.61-4.87 mm, with an average size measured at 2.03 ± 0.04 mm. Also, the MP pollution load index values for the surface water bodies were found to be below 10, indicating a low risk category. Though currently designated as "low risk," it is important that mitigation strategies be brought over at this juncture to further prevent the deterioration of quality of water. Thus, this study not only intends to bring forth the impact of human activities, industrial waste, open waste dumping, and inadequate municipal waste management practices on increasing MP concentration but also highlights the sustainable alternatives and strategies to address this emerging pollutant in urban water systems. For further prevention, the implementation of stringent regulations and on-site plastic waste segregation is a critical component in preventing the disposal of plastic waste in surface water bodies. RESEARCH HIGHLIGHTS: The abundance of MPs was found to be 16-28 particles/L, with an average value of 23 particles/L. The surface water bodies in Rohtak district fall into the hazard categories of low risk with values less than 10. The overall MP concentration in water, across all five areas, based on color was in order: white/transparent (39.1%), black (15%), gray (9.1%), green (8.7%), blue (7.8%), red (7.8%), orange (6.3%), and yellow (6.1%). The dominant polymers were polyethylene (PE) (42%) and polypropylene (41%) as determined by FTIR spectroscopy.

Environmental toxicology of microplastic particles on fish: A review

The increase in plastic debris and its environmental impact has been a major concern for scientists. Physical destruction, chemical reactions, and microbial activity can degrade plastic waste into particles smaller than 5 mm, known as microplastics (MPs). MPs may eventually enter aquatic ecosystems through surface runoff. The accumulation of MPs in aquatic environments poses a potential threat to finfish, shellfish, and the ecological balance. This study investigated the effect of MP exposure on freshwater and marine fish. MPs could cause significant harm to fish, including physical damage, death, inflammation, oxidative stress, disruption of cell signalling and cellular biochemical processes, immune system suppression, genetic damage, and reduction in fish growth and reproduction rates. The activation of the detoxification system of fish exposed to MPs may be associated with the toxicity of MPs and chemical additives to plastic polymers. Furthermore, MPs can enhance the bioavailability of other xenobiotics, allowing these harmful substances to more easily enter and accumulate in fish. Accumulation of MPs and associated chemicals in fish can have adverse effects on the fish and humans who consume them, with these toxic substances magnifying as they move up the food chain. Changes in migration and reproduction patterns and disruptions in predator-prey relationships in fish exposed to MPs can significantly affect ecological dynamics. These interconnected changes can lead to cascading effects throughout aquatic ecosystems. Thus, implementing solutions like reducing plastic production, enhancing recycling efforts, using biodegradable materials, and improving waste management is essential to minimize plastic waste and its environmental impact.

Current practices of plastic waste management, environmental impacts, and potential alternatives for reducing pollution and improving management

Plastic products are indispensable across various applications, yet their disposal poses significant environmental hazards, such as groundwater contamination, soil degradation, and marine ecosystem threats, impacting both human health and ecological balance. Key issues include rapid development and population growth, inadequate technical skills for hazardous waste management, insufficient infrastructure for recycling, and a general lack of awareness regarding regulations. This study offers a comprehensive analysis of plastic waste generation, its sources, current management practices, and its environmental impacts, along with mitigation measures. Globally, predictions indicate that plastic production could exceed 650 million tons by 2050, representing a staggering more than 22000 % increase compared to 1950, highlighting the pressing need for action. Moreover, due to their chemical structures and prolonged degradation periods, plastic waste (PW) can lead to cancer, nervous system damage, rapid genetic changes, and metabolic disorders in humans. In that scenario, waste-to-energy and product conversion strategies through thermochemical conversion techniques can be a double-edged solution by minimizing waste along with providing value-added products. Also, using alternatives to plastic, including bio-plastics, stainless steel, glass, platinum silicon, wood, bamboo, cardboard, paper, cotton, pottery, ceramics, and more, can be a viable pathway for proper PW management. The successful incorporation of the proposed alternative products holds promise for improving the overall management of plastic waste. Additionally, this study highlights sustainable waste management practices and outlines the primary challenges in implementing effective strategies to reduce the negative impact of plastic waste.

Monomer production from supercritical ethanol depolymerization of PET plastic waste using Ni-ZnO/Al2O3 catalyst

Plastic waste poses a serious threat to the global environment, with recycled polyethylene terephthalate (PET) plastic accounting for a considerable portion. The application of supercritical ethanol depolymerization technology presents an effective method for recycling PET waste. This study investigated using Ni as an additive to enhance the catalytic activity of ZnO/Al2O3 catalyst for PET waste depolymerization. The effects of different catalysts, catalyst dosage, reaction temperature, and reaction time on PET waste depolymerization were studied using the single-factor controlled variable method. The results showed that the 3Ni-ZnO/Al2O3 was the optimal catalyst, and under the optimal conditions with catalyst dosage of 4 %, reaction temperature of 260 °C, and reaction time of 60 min, the depolymerization efficiency of PET waste could reach 100 %, with the highest yields of diethyl terephthalate (DET) and ethylene glycol (EG) of 93.6 % and 90.2 %, respectively. Response surface methodology (RSM) was used to optimize the operating conditions to obtain the highest monomer yields. The predicted optimal parameters from RSM were as follows: reaction temperature = 262.8 °C, reaction time = 63.2 min, catalyst dosage = 3.8 wt%, with the predicted highest DET and EG yields of 95.9 % and 90.7 %, respectively. The analysis of variance (ANOVA) results for DET and EG possessed the R2 values of 0.9921 and 0.9885, respectively, with p-values < 0.0001, indicating a good fit for the models. Furthermore, after five times reuse, the 3Ni-ZnO/Al2O3 catalyst still exhibited good catalytic activity and stability. In conclusion, this study offers a clean, green, and sustainable alternative to recycling plastic waste.

Spatiotemporal response of microplastics to natural and anthropogenic factors in estuarine waters

Riverine outflow is the primary pathway for transporting microplastics from terrestrial to marine environments, making estuaries hotspots for microplastics pollution. However, how and to what extent natural and anthropogenic factors affect the distribution of microplastics in estuarine waters remains largely unknown. A meta-analysis of 126 estuaries from 93 studies revealed a global median microplastics abundance of 196.9 items/m3, with a range from 0.007 ± 0.003 to 792,000 ± 138,000 items/m3. Microplastics were more abundant in estuaries in Asia and Oceania compared to Europe and South America. The microplastic abundance in estuarine waters was positively correlated with regional population density, per capita plastic waste, agricultural land proportion, and silt content, while the human development index (HDI) and mean annual precipitation displayed negative effects on microplastic abundance. Notably, HDI was the dominant factor influencing microplastic abundance in estuarine waters. In developing countries, microplastic abundance in estuarine waters showed positive changes, whereas it remained stable in developed countries over time. This study offers critical insights into the effects of natural and anthropogenic factors on the distribution patterns of microplastics in estuarine waters, providing important support for future management of microplastics pollution in estuaries.

Investigating interface adhesion of PLA-coated cellulose paper straws: Degradation, plant growth effects, and life cycle assessment

Although bioplastics and paper straws have been introduced as alternatives to single-use plastic straws, their potential environmental, economic, and social impacts have not been analyzed. This study addresses this gap by designing a polylactic acid layer interface adhesion on cellulose paper-based (PLA-P) composite straws by a dip molding process. This process is simple, efficient, and scalable for massive production. Optimizing key manufacturing parameters, including ice bath ultrasonic, overlapping paper strips (2 strips), winding angle (60°), soaking time (5 min), and drying temperature (50 °C), were systematically evaluated to improve straw quality and manufacturing efficiency. PLA chains were found to deposit onto the cellulose network through intermolecular interactions to form a consistent "sandwich" structure, which can improve adhesion, water resistance, and mechanical properties. Interestingly, PLA-P straws effectively decomposed in soil and compost environments, with a 35-40 % degradation rate within 4 months. Besides, PLA-P straw residues affected seed germination and plant growth, but no significant toxic effects were detected. Further, microplastics were observed in soil and plant tissues (roots, stems, and leaves), and their possible diffusion mechanisms were explored. The results of a comprehensive life cycle assessment (LCA) and cost analysis showed that the process improvements reduced the ecological footprint of PLA-P straws and showed good prospects for commercial application. The study's findings contribute to the understanding of bioplastics and paper straws in effectively reducing environmental impact and fostering sustainable development.

Critical reassessment of microplastic abundances in the marine environment

Microplastics (MPs) pose a growing concern in the marine environment, but their global prevalence remains largely unknown due to the absence of precise and standardized detection methods. This review critically evaluates existing techniques for quantifying MP abundances in marine field studies, addressing inaccuracies resulting from the exclusion of particle sizes, polymer types, or limitations in identification methods. These traced inaccuracies were considered to recalculate MP abundances for particle sizes from 10 to 5000 μm, providing the first corrected global overview of MP distribution that enables quality assessment and reliable comparisons between adjusted data. The recalculations indicate that MP abundances are up to 15 times higher in marine waters (average (1.5 ± 36.2) × 105 items m-3) and up to 11 times higher in the marine sediments (average (2.7 ± 117.9) × 105 items kg-1) than previously reported in the literature. The Australasian Mediterranean Sea (average (1.2 ± 10.6) × 106 items m-3) and the North Atlantic (average (2.1 ± 37.6) × 105 items kg-1) emerged as the most polluted regions in marine waters and sediments, respectively, with primary contributors being the coasts of Southeast Asia and East America. This review demonstrates that previous field studies, global estimates, and models have significantly underestimated MP levels in marine environments in many cases, which could result in misinterpretations of both local and global pollution levels. This work highlights the critical need for precise handling of microplastic samples and urges future researchers to adopt standardized protocols for MP analysis to avoid inaccurate and misleading outcomes.

Do plastic clean-up technologies work? What research does (and doesn't) tell us

Plastic pollution harms all levels of ecosystems and organisms; therefore, global plastic pollution must be addressed at all plastic life cycle stages. One solution involves the clean-up and remediation of plastic pollution using technologies. To further our understanding of these technologies, we collated 102 clean-up technologies invented to prevent or collect plastic in aquatic environments and analyzed the non-peer-reviewed and peer-reviewed literature for effectiveness and ecological impact data. Across all available literature, effectiveness data were under-reported, lacked standardization, and were rarely tested by a neutral third party. This makes it difficult to make informed decisions when choosing which clean-up technology to deploy and evaluate the environmental impact of these technologies. Regulation and standardized reporting guidelines for clean-up technologies are an important next step for decision-makers interested in plastic pollution clean-up. As global interest in addressing plastic pollution grows, this research paves the path for the effective use of plastic clean-up technologies.

Future Scenarios for River Exports of Multiple Pollutants by Sources and Sub-Basins Worldwide: Rising Pollution for the Indian Ocean

In the future, rivers may export more pollutants to coastal waters, driven by socio-economic development, increased material consumption, and climate change. However, existing scenarios often ignore multi-pollutant problems. Here, we aim to explore future trends in annual river exports of nutrients (nitrogen and phosphorus), plastics (macro and micro), and emerging contaminants (triclosan and diclofenac) at the sub-basin scale worldwide. For this, we implement into the process-based MARINA-Multi model (Model to Assess River Inputs of pollutaNts to the seAs) two new multi-pollutant scenarios: "Sustainability-driven Future" (SD) and "Economy-driven Future" (ED). In ED, river exports of nutrients and microplastics will double by 2100, globally. In SD, a decrease of up to 83% is projected for river export of all studied pollutants by 2100, globally. Diffuse sources such as fertilizers are largely responsible for increasing nutrient pollution in the two scenarios. Point sources, namely sewage systems, are largely responsible for increasing microplastic pollution in the ED scenario. In both scenarios, the coastal waters of the Indian Ocean will receive up to 400% more pollutants from rivers by 2100 because of growing population, urbanization, and poor waste management in the African and Asian sub-basins. The situation differs for sub-basins draining into the Mediterranean Sea and the Pacific Ocean (mainly less future pollution) and the Atlantic Ocean and Arctic Ocean (more or less future pollution depending on sub-basins and scenarios). From 56% to 78% of the global population are expected to live in more polluted river basins in the future, challenging sustainable development goals for clean waters.

Sight of Aged Microplastics Adsorbing Heavy Metal Exacerbated Intestinal Injury: A Mechanistic Study of Autophagy-Mediated Toxicity Response

Contaminant-bearing polystyrene microplastics (PSMPs) may exert significantly different toxicity profiles from their contaminant-free counterparts, with the role of PSMPs in promoting contaminant uptake being recognized. However, studies investigating the environmentally relevant exposure and toxic mechanisms of aged PSMPs binding to Cr are limited. Here, we show that loading of chromium (Cr) markedly alters the physicochemical properties and toxicological profiles of aged PSMPs. Specifically, Cr-bearing aged PSMPs induced severe body weight loss, oxidative stress (OS), autophagy, intestinal barrier injury, inflammation-pyroptosis response, and enteropathogen invasion in mice. Mechanistic investigations revealed that PSMPs@Cr exacerbated the OS, resulting in intestinal barrier damage and inflammation-pyroptosis response via overactivated Notch signaling and autophagy/cathepsin B/IL-1β pathway, respectively, which ultimately elevated mortality related to bacterial pathogen infection. In vitro experiments confirmed that autophagy-mediated reactive oxygen species (ROS) overproduction resulted in severe pyroptosis and impaired intestinal stem cells differentiation alongside the overactivation of Notch signaling in PSMPs@Cr-exposed organoids. Overall, our findings provide an insight into autophagy-modulated ROS overproduction within the acidic environment of autophagosomes, accelerating the release of free Cr from PSMPs@Cr and inducing secondary OS, revealing that PSMPs@Cr is a stable hazard material that induces intestinal injury. These findings provided a potential therapeutic target for environmental MPs pollution caused intestinal disease in patients.

Bridging the knowledge gap-microplastics in focus: assessing microplastic pollution awareness among medical students

Microplastic pollution is a growing environmental and health issue. This study evaluates microplastic pollution awareness among medical students at Pamukkale University and the factors influencing it. A cross-sectional study was conducted in June 2023 with 474 students from the 1st, 3rd, and 6th years, using a 26-item questionnaire, including the 14-item Microplastic Pollution Awareness Scale (MPAS). The mean MPAS score was 22.94 ± 3.67, reflecting moderate to high awareness. Female students (p = 0.001), prior knowledge of microplastics (p < 0.001), and concern about microplastic health risks (p < 0.001) were associated with higher awareness. Social media was the most common source of information (49.2%). Although awareness is moderate, significant gaps exist in students' understanding of microplastic health impacts. Targeted educational interventions are needed to close these gaps, empowering future healthcare professionals to address the risks of microplastic pollution.

Unraveling the Interplay between Stability and Flexibility in the Design of Polyethylene Terephthalate (PET) Hydrolases

The accumulation of polyethylene terephthalate (PET), a widely used polyester plastic in packaging and textiles, has led to a global environmental crisis. Biodegradation presents a promising strategy for PET recycling, with PET hydrolases (PETase) undertaking the task at the molecular level. Unfortunately, PETase operates only at ambient temperatures with low efficiency, limiting its industrial application. Current engineering efforts focus on enhancing the thermostability of PETase, but increased stability can reduce the structural dynamics needed for substrate binding, potentially slowing enzymatic activity. To elucidate the balance between stability and flexibility in optimizing PETase catalytic activity, we performed theoretical investigations on both wild-type PETase (WT-PETase) and a thermophilic variant (Thermo-PETase) using molecular dynamics simulations and frustration analysis. Despite being initially designed to stabilize the native structure of the enzyme, our findings reveal that Thermo-PETase exhibits an unprecedented increase in structural flexibility at the PET-binding and catalytic sites, beneficial for substrate recruitment and product release, compared to WT-PETase. Upon PET binding, we observed that the structural dynamics of Thermo-PETase is largely quenched, favoring the proximity between the catalytic residues and the carbonyl of the PET substrate. This may potentially contribute to a higher probability of a catalytic reaction occurring in Thermo-PETase compared to WT-PETase. We suggest that Thermo-PETase can exhibit higher PET-degradation performance than WT-PETase across a broad temperature range by leveraging stability and flexibility at high and low temperatures, respectively. Our findings provide valuable insights into how PETase optimizes its enzymatic performance by balancing stability and flexibility, which may contribute to future PETase design strategies.

Innovative biomaterials for food packaging: Unlocking the potential of polyhydroxyalkanoate (PHA) biopolymers

Polyhydroxyalkanoate (PHA) biopolyesters show a good balance between sustainability and performance, making them a competitive alternative to conventional plastics for ecofriendly food packaging. With an emphasis on developments over the last decade (2014-2024), this review examines the revolutionary potential of PHAs as a sustainable food packaging material option. It also delves into the current state of commercial development, competitiveness, and the carbon footprint associated with PHA-based products. First, a critical examination of the challenges experienced by PHAs in terms of food packaging requirements is undertaken, followed by an assessment of contemporary strategies addressing permeability, mechanical properties, and processing considerations. The various PHA packaging end-of-life options, including a comprehensive overview of the environmental impact and potential solutions will also be discussed. Finally, conclusions and future perspectives are elucidated with a view of prospecting PHAs as future green materials, with a blend of performance and sustainability of food packaging solutions.

Adverse health effects of exposure to plastic, microplastics and their additives: environmental, legal and policy implications for Israel

BACKGROUND

Israel is a regional "hotspot" of plastic pollution, with little discussion of potential adverse health effects from exposure to plastic. This review aims to stimulate discussion and drive policy by focusing on these adverse health effects.

MAIN BODY

Plastics are synthetic polymers containing additives which can leach from food- and beverage-contact plastic into our food and beverages, and from plastic textiles onto our skin. Plastics persist in the environment for generations, fragmenting into MNPs: Micro (1 micron-5 mm)-Nano (1 nm-1 micron)-Plastic, which contaminate our atmosphere, water, and food chain. MNP can enter the human body through ingestion, inhalation and touch. MNP < 10 microns can cross epithelial barriers in the respiratory and gastrointestinal systems, and fragments < 100 nm can cross intact skin, enabling entry into body tissues. MNP have been found in multiple organs of the human body. Patients with MNP in atheromas of carotid arteries have increased risk of a combined measure of stroke, cardiovascular disease, and death. Toxic additives to plastics include bisphenols, phthalates, and PFAS, endocrine-disrupting chemicals (EDCs) which cause dysregulation of thyroid function, reproduction, and metabolism, including increased risk of obesity, diabetes, endometriosis, cancer, and decreased fertility, sperm count and quality. Fetal exposure to EDCs is associated with increased rates of miscarriages, prematurity and low birth weight. There is likely no safe level of exposure to EDCs, with increasing evidence of trans-generational and epigenetic effects. There are several existing Israeli laws to reduce plastic use and waste. Taxes on single-use plastic (SUP) were recently cancelled. There are many gaps in regulatory standards for food-, beverage- and child- safe plastic. Existing standards are poorly enforced.

CONCLUSION

Reduction in production and use of plastic, promotion of recycling and reduction of leaching of toxic additives into our food and beverages are essential policy goals. Specific recommendations: Periodic monitoring of MNP in bottled beverages, food, indoor air; Strengthen enforcement of standards for food-, beverage-, and child-safe plastic; Renew tax on SUPs; National ban on SUP at public beaches, nature reserves and parks; Ban products manufactured with MNP; Increase research on sources and health outcomes of exposure to MNP and EDCs.

Sustainable valorization of waste plastic into nanostructured materials for environmental, energy, catalytic and biomedical applications: A review

The extensive production and utilization of plastic products are inevitable in the current scenario. However, the non-degradable nature of waste plastic generated after use poses a grave concern. Comprehensive efforts are being made to find viable technological solutions to manage the escalating challenge of waste plastic. This review focuses on the progress made in transformation of waste plastic into value-added nanomaterials. An overview is provided of the waste plastic issue on a global level and its ecological impacts. Currently established methodologies for waste plastic management are examined, along with their limitations. Subsequently, state-of-the-art techniques for converting waste plastic into nanostructured materials are presented, with a critical evaluation of their distinct merits and demerits. Several demonstrated technologies and case studies are discussed regarding the utilization of these nanomaterials in diverse applications, including environmental remediation, energy production and storage, catalytic processes, sensors, drug delivery, bioimaging, regenerative medicine and advanced packaging materials. Moreover, challenges and prospects in the commercial level production of waste plastic-derived nanomaterials and their adoption for industrial and practical usage are highlighted. Overall, this work underscores the potential of transforming waste plastic into nanostructured materials for multifaceted applications. The valorization approach presented here offers an integration of waste plastic management and sustainable nanotechnology. The development of such technologies should pave the way toward a circular economy and the attainment of sustainable development goals.

Abundance of Marine Macrodebris on the Northern Coast of Jaffna Peninsula, Sri Lanka

Marine plastic debris has emerged as a pressing concern along the northern coast of Jaffna, Sri Lanka, posing a significant threat to marine resources. A preliminary study was conducted to investigate the abundance and characteristics of marine plastic debris at four major fish landing sites in the northern coast of Jaffna, using the Clean Coast Index (CCI) and Plastic Abundance Index (PAI). The results revealed that the average abundance of marine debris and plastic debris were 1.71 ± 0.42 items/m2 and 1.66 ± 0.57 items/m2, respectively. The most common types of plastic debris represented plastic rope and net pieces (23.2%), followed by unidentified weathered plastic fragments (16.7%), beverage bottles (16.2%), bottle caps and lids (13%), and styrofoam (14.1%). The recognized sources of plastic debris were mainly fishing-based activities, recreation activities, transboundary sources, and unidentified sources. The fish landing sites were classified as exceptionally polluted, with a CCI exceeding 10 and a PAI value exceeding 8. Myliddy had the highest debris density, indicating substantial pollution levels, followed by Point Pedro, Mathagal, and Valveddithurai. These findings underscore the urgency of establishing a comprehensive plastic waste management framework for the northern coast of Jaffna and devising strategies to address buoyant debris within the northern Indian Ocean. Furthermore, this study carries significant implications for the local marine ecosystem, coastal communities, and Sri Lanka's broader environmental policies and practices.

Upgrading Polyolefin Plastic Waste into Multifunctional Porous Graphene using Silicone-Assisted Direct Laser Writing

The widespread use of plastics, especially polyolefin including polyethylene and polypropylene, has led to severe environmental crises. Chemical recycling, a promising solution for extracting value from plastic waste, however, is underutilized due to its complexity. Here, a simple approach, silicone-assisted direct laser writing (SA-DLW) is developed, to upgrade polyolefin plastic waste into multifunctional porous graphene, called laser-induced graphene (LIG). This method involves infiltrating polyolefins with silicone, which retards ablation during the DLW process and supplies additional carbon atoms, as confirmed by experimental and molecular dynamic results. A remarkable conversion yield of 38.3% is achieved. The upgraded LIG exhibited a porous structure and high conductivity, which is utilized for the fabrication of diverse energy and electronic devices with commendable performance. Furthermore, the SA-DLW technique is versatile for upgrading plastic waste in various types and forms. Upgrading plastic waste in the form of fabric has significantly simplified pre-treatment. Finally, a wearable flex sensor is fabricated on the non-woven fabric of a discarded medical mask, which is applied for gesture monitoring. This work offers a simple but effective solution to upgrade plastic waste into valuable products, contributing to the mitigation of environmental challenges posed by plastic pollution.

Seasonal variation in abundance and characteristics of microplastic in sewage sludge from major cities across the upper stretch of River Ganga, India

Microplastic (MP) load in urban sewage sludge could vary annually in wastewater treatment plants (WWTPs) depending on seasonal precipitation and human activities. We investigated the seasonal dynamics in abundance and characterization of MP loading in WWTPs located in two cities across River Ganga, India's ecologically sensitive upper stretch. During a 12-month seasonal sampling (pre-monsoon, monsoon, and post-monsoon), sludge samples (n = 36) (primary sludge, PS; drying bed sludge, DBS) were collected and analyzed for load, polymer types, shape, colour, and size (20-1000 µm). Across the three seasons, MP concentrations (particles/kg) were found to be in the ranges of 93.4 ± 5.0 × 103-189.4 ± 11 × 103 in the PS and 39.6 ± 4.0 × 103-152.0 ± 7 × 103 in the DBS. The trend of MP loading was in the following order: monsoon > post-monsoon > pre-monsoon. The dominant MP size was 50-200 µm (36.22%) followed by 20-50 µm (27.65%), 200-500 µm (24.55%) and 500-1000 µm (11.58%). ATR-FTIR results revealed polypropylene, polyethylene terephthalate, polyvinyl chloride, and nylon dominating MP in sludge. This study highlights the importance of long-term monitoring of MP loading in sewage sludge to offer a more accurate estimate of MP contamination in sludge from WWTPs and develop a possible mechanism for its elimination to safeguard the environment.

The crucial role of circular waste management systems in cutting waste leakage into aquatic environments

Waste leakage has become a major global concern owing to the negative impacts on aquatic ecosystems and human health. We combine spatial analysis with the Shared Socioeconomic Pathways to project future waste leakage under current conditions and develop mitigation strategies up to 2040. Here we show that the majority (70%) of potential leakage of municipal solid waste into aquatic environments occurs in China, South Asia, Africa, and India. We show the need for the adoption of active mitigation strategies, in particular circular waste management systems, that could stop waste from entering the aquatic ecosystems in the first place. However, even in a scenario representing a sustainable world in which technical, social, and financial barriers are overcome and public awareness and participation to rapidly increase waste collection rates, reduce, reuse and recycling waste exist, it would be impossible to entirely eliminate waste leakage before 2030, failing to meet the waste-related Sustainable Development Goals.

Macro and microplastic pollution in Romania: addressing knowledge gaps and potential solutions under the circular economy framework

Background

This review reveals the role of linear economy prevalence and mismanagement practices in plastic pollution of aquatic and terrestrial environments and related knowledge gaps in Romania while outlining downstream and upstream solutions to reduce plastic pollution and adopt circular economy strategies. Thus, the major aim of this study is the investigation of the stage of scientific knowledge concerning all these demands in the Romanian context.

Methodology

This work integrates two main approaches: (i) a bibliometric analysis fed by Web of Science and Scopus databases to reveal the current coverage of peer-reviewed literature related to plastic waste in Romania and (ii) a subject-based review to underline the main themes related to plastic waste management, plastic pollution, and mitigating options in Romania in line with circular economy principles.

Results

Reducing plastic pollution requires scientific knowledge, multi-sectoral cooperation, and societal awareness. Following this, the topics of plastic waste and plastic pollution appeared to be under-investigated in the literature considering Romania as a case study and concentrated around the 2020 year, emphasizing, in this way, the trendiness of plastic waste concerns and their management in the current research landscape. Our analysis points out that: (i) Romania is facing massive plastic pollution requiring solid improvements in waste management performances; (ii) few peer-reviewed research studies are performed in Romania for both macro and microplastic concerns with unknown pollution levels in most of its geographical regions; (iii) the plastic waste management is still understudied here, while waste statistics are poorly available at local levels; (iv) the perspectives of circular economy transition are still limited, feeding the plastic pollution in the coming years.

Conclusions

Several knowledge gaps are identified and must be covered by future research such as (i) adjusting mismanaged plastic waste levels to regional waste management performances and determining littering rates in urban and rural areas to improve the plastic pollution modeling inputs; (ii) examining plastic pollution associated with landfill sites and waste imports; (iii) assessing the sectoral contributions to macro and microplastic pollution of aquatic environments related to municipalities, tourist destinations, agriculture, etc.; (iv) determining retention levels of plastic in river basins and role of riparian vegetation; (v) analyzing microplastics presence in all types of freshwater environments and interlinkage between macroplastic fragmentation and microplastic; (vi) assessing the plastic loads of transboundary rivers related to mismanagement practices; (vii) determining concentrations of microplastics in air, soil, and other land use ecosystems.

Coastal plastic pollution: A global perspective

Coastal ecosystems have ecological importance worldwide and require control and prevention measures to mitigate human pollution. The objective of this study was to perform a systematic review to provide a comprehensive overview of the global issue of coastal plastic pollution. 689 articles were eligible for qualitative synthesis and 31 were considered for quantitative analysis. There was an exponential increase in articles addressing coastal plastic pollution over the past 50 years. Studies were mainly carried out on beaches, and plastic bottles were the most found item, followed by cigarette butts. Polyethylene was the predominant plastic polymer, and white microplastic fragments stood out. China published most articles on the topic and Brazil had the highest number of sites sampled. Meta-analysis had significant effect sizes based on the reported data. These findings carry significant implications for environmental policies, waste management practices, and targeted awareness campaigns aimed at mitigating plastic pollution.

Synergy of waste plastics and natural fibers as sustainable composites for structural applications concerning circular economy

The increasing demand for shelters, depleting natural resources, concern for plastic waste, and rising awareness for the environment have attracted the contemporary world towards the recycling of waste plastics for the development of an alternative and sustainable building construction material. The plastics suffer due to their poor strength which can be successfully overcome by the reinforcement of natural fibers. The work aimed to develop and investigate the properties of natural fiber-reinforced composites for structural applications such as floor tiles and pavements. The composites were developed by utilizing three different types of waste plastics, namely, low-density polyethylene, high-density polyethylene, and polypropylene with the reinforcement of coconut (cocos nucifera) and Tossa jute (corchorus olitorius) fibers. The evaluation of the density, water absorption, compressive strength, and flexural strength was performed. Moreover, three-body abrasive wear performance was investigated under the conditions of different loads and sliding speeds. The wear mechanism was explored by the morphological analyses of the fractured and worn-out surfaces. The composite HDPE80C20 showed a maximum density of 1.603 g/cm3 and minimum percentage of water absorption to 0.2022. Moreover, the composite attained a maximum compressive and flexural strength of 40.10 and 10.04 (MPa), respectively. The ranges for abrasive wear were found to be 0.002375-0.20015 (cm3) and 0.01987-0.39593 (cm3) under the considered conditions of loads and sliding speeds, respectively. The comparative analysis of the properties suggested the reinforcement of 20 wt% of jute fiber with 80 wt% of high-density polyethylene for the development of composites for structural applications. The study highlighted the potential of waste plastics and natural fibers as value-added products for building construction with relevancy from socio-eco and environmental points of view.

Material Flow Analysis and Occupational Exposure Assessment in Additive Manufacturing End-of-Life Material Management

Additive manufacturing (AM) offers a variety of material manufacturing techniques for a wide range of applications across many industries. Most efforts at process optimization and exposure assessment for AM are centered around the manufacturing process. However, identifying the material allocation and potentially harmful exposures in end-of-life (EoL) management is equally crucial to mitigating environmental releases and occupational health impacts within the AM supply chain. This research tracks the allocation and potential releases of AM EoL materials within the US through a material flow analysis. Of the generated AM EoL materials, 58% are incinerated, 33% are landfilled, and 9% are recycled by weight. The generated data set was then used to examine the theoretical occupational hazards during AM EoL material management practices through generic exposure scenario assessment, highlighting the importance of ventilation and personal protective equipment at all stages of AM material management. This research identifies pollution sources, offering policymakers and stakeholders insights to shape pollution prevention and worker safety strategies within the US AM EoL management pathways.

Forecasting municipal solid plastic waste generation and management policy using system dynamics: a case study of Khulna City in Bangladesh

A comprehensive analysis of municipal solid plastic waste (MSPW) management while emphasizing plastic pollution severity in coastal cities around the world is mandatory to alleviate the augmenting plastic waste footprint in nature. Thus, decision-makers' persuasion for numerous management solutions of MSPW flow-control can be met through meditative systematic strategies at the regional level. To forecast solutions focused on systematic policies, an agent-based system dynamics (ASD) model has been developed and simulated from 2023 to 2040 while considering significant knit parameters for MSPW management of Khulna City in Bangladesh. Baseline simulation results show that per-capita plastic waste generation will increase to 11.6 kg by 2040 from 8.92 kg in 2023. Eventually, the landfilled quantity of plastic waste has accumulated to 70,000 tons within 18 years. Moreover, the riverine discharge has increased to 834 tons in 2040 from a baseline quantity of 512 tons in 2023. So the plastic waste footprint index (PWFI) value rises to 24 by 2040. Furthermore, the absence of technological initiatives is responsible for the logarithmic rise of non-recyclable plastic waste to 1.35*1000=1350 tons. Finally, two consecutive policy scenarios with baseline factors such as controlled riverine discharge, increased collection and separation of plastic waste, expansion of recycle business, and locally achievable plastic conversion technologies have been simulated. Therefore, policy 2, with 69% conversion, 80% source separation, and 50% riverine discharge reduction of MSPW, has been found adequate from a sustainability perspective with the lowest PWFI ranges of 3.97 to 1.07 alongside a per-capita MSPW generation of 7.63 to 10 kg from 2023 till 2040.

An evaluation of microplastic contamination in the marine waters and species in the coastal region of the South Yellow Sea, China

Microplastics (MPs) contamination of marine environments poses a significant ecological risk, although impacts on species' realized niche spaces remain unclear. The current study investigates MPs distribution across pelagic habitats, benthic sediments, and key biota in the South Yellow Sea, China. Samples were collected via trawling across estuarine transects, and tissues were digested to extract MPs. Density gradient separations and vacuum-filtrations prepared particle extracts for ATR-FTIR and Micro-Raman spectroscopic characterization. Sampling along industrialized river transects reveals ubiquitous plastic particle presence, with concentrations ranging from 0 to 51.68 item/L seawater. Contamination levels reach their peak at station estuaries before dispersing offshore, indicating significant waste stream inputs. Importantly, MPs detected in demersal and pelagic fish species, as well as in bivalves, confirm exposure across trophic niches. Gastrointestinal tract and gill concentrations reached 0.6 items/g fresh tissue, reflecting significant biological uptake and in vivo retention. The greatest population of organisms occurred adjacent to polluted areas. Overall, distribution of MPs from polluted rivers to coastal food webs was evident, suggesting potential negative impacts on key ecological functions in this system. These findings underscore the need to develop upstream mitigation efforts so as to minimize MPs contamination in areas where nearshore and offshore niches intersect.

Tracing beach litter sources: Drink lids tell a different story from their bottles

Water and soft drink bottles made from polyethylene terephthalate (PET) sink at sea unless they contain trapped air, whereas their lids are made from polymers that float and can drift long distances. We sampled loose lids and bottles at 21 South African beaches to compare their origins. The proportions of foreign-made bottles and lids were correlated, and increased away from urban centres, indicating that much land-based litter strands close to source areas. Over 80 % of foreign-made drink bottles and 90 % of lids came from Asia, but most bottles were manufactured in China, Malaysia-Singapore and the UAE, and were dumped from ships. By comparison, most loose lids were in poor condition after being carried across the Indian Ocean from Indonesia by the South Equatorial Current. Reducing PET drink bottles at sea requires enforcement of regulations banning dumping at sea, whereas reducing their lids requires better control of littering in source countries.

Plastic Food Packaging from Five Countries Contains Endocrine- and Metabolism-Disrupting Chemicals

Plastics are complex chemical mixtures of polymers and various intentionally and nonintentionally added substances. Despite the well-established links between certain plastic chemicals (bisphenols and phthalates) and adverse health effects, the composition and toxicity of real-world mixtures of plastic chemicals are not well understood. To assess both, we analyzed the chemicals from 36 plastic food contact articles from five countries using nontarget high-resolution mass spectrometry and reporter-gene assays for four nuclear receptors that represent key components of the endocrine and metabolic system. We found that chemicals activating the pregnane X receptor (PXR), peroxisome proliferator receptor γ (PPARγ), estrogen receptor α (ERα), and inhibiting the androgen receptor (AR) are prevalent in plastic packaging. We detected up to 9936 chemical features in a single product and found that each product had a rather unique chemical fingerprint. To tackle this chemical complexity, we used stepwise partial least-squares regressions and prioritized and tentatively identified the chemical features associated with receptor activity. Our findings demonstrate that most plastic food packaging contains endocrine- and metabolism-disrupting chemicals. Since samples with fewer chemical features induce less toxicity, chemical simplification is key to producing safer plastic packaging.

Beyond the Nucleus: Plastic Chemicals Activate G Protein-Coupled Receptors

G protein-coupled receptors (GPCRs) are central mediators of cell signaling and physiological function. Despite their biological significance, GPCRs have not been widely studied in the field of toxicology. Herein, we investigated these receptors as novel targets of plastic chemicals using a high-throughput drug screening assay with 126 human non-olfactory GPCRs. In a first-pass screen, we tested the activity of triphenol phosphate, bisphenol A, and diethyl phthalate, as well as three real-world mixtures of chemicals extracted from plastic food packaging covering all major polymer types. We found 11 GPCR-chemical interactions, of which the chemical mixtures exhibited the most robust activity at adenosine receptor 1 (ADORA1) and melatonin receptor 1 (MTNR1A). We further confirm that polyvinyl chloride and polyurethane products contain ADORA1 or MTNRA1 agonists using a confirmatory secondary screen and pharmacological knockdown experiments. Finally, an analysis of the associated gene ontology terms suggests that ADORA1 and MTNR1A activation may be linked to downstream effects on circadian and metabolic processes. This work highlights that signaling disruption caused by plastic chemicals is broader than that previously believed and demonstrates the relevance of nongenomic pathways, which have, thus far, remained unexplored.

Current patterns and trends of microplastic pollution in the marine environment: A bibliometric analysis

Microplastics are pervasive in the natural environment and pose a growing concern for global health. Plastic waste in marine environments has emerged as a global issue, threatening not only marine biota but also human health due to its implications for the food chain. This study aims to discern the patterns and trends of research, specifically on Marine Microplastic Pollution (MMP), based on a bibliometric analysis of scientific publications from 2011 to 2022. The methodology utilized in this study comprises three stages: (a) creating a bibliographical dataset from Scopus by Elsevier and the Web of Science Core Collection by Clarivate Analytics, (b) analyzing current research (trends and patterns) using bibliometric analysis through Biblioshiny tool, and (c) examining themes and subthemes in MMP research (wastewater treatment, plastic ingestion, the Mediterranean Sea, microplastics pollution, microplastics in freshwater, microplastic ingestion, plastic pollution, and microplastic pollution in the marine environment). The findings reveal that during the studied period, the number of MMP publications amounted to 1377 articles, with an average citation per publication of 59.23 and a total citation count of 81,553. The most cited article was published in 2011, and since then, the number of publications on this topic has been increasing steadily. The author count stood at 5478, with 22 trending topics identified from the 1377 published titles. Between 2019 and 2022, the countries contributing most to the publication of MMP articles were China, the United States of America (USA), and the United Kingdom (UK). However, a noticeable shift in the origin of author countries was observed in the 2019-2022 timeframe, transitioning from a dominance by the USA and the UK to a predominance by China. In 2019, there was a substantial increase in the volume of publications addressing the topic of microplastics. The results show that the most prevalent themes and subthemes pertained to MMP in the Mediterranean Sea. The journals with the highest number of MMP articles published were the Marine Pollution Bulletin (253 articles) and Science of the Total Environment (190 articles). The analysis concludes that research on MMP remains prominent and appears to be increasing each year.

New combined absorption/1H NMR method for qualitative and quantitative analysis of PET degradation products

Poly(ethylene terephthalate) (PET) is a very valuable and beneficial material for industrial purposes, with various different applications. Due to the high annual production volume of over 50 million tons worldwide and the indiscriminate disposal by consumers, the polymers accumulate in the environment, causing negative effects on various ecosystems. Biodegradation via suitable enzymes represents a promising approach to combat the plastic waste issue so validated methods are required to measure the efficiency and efficacy of these enzymes. PETase and MHETase from Ideonella sakaiensis are suitable enzymes needed in combination to completely degrade PET into its environmentally friendly monomers. In this project, we compare and combine a previously described bulk absorbance measurement method with a newly established 1H NMR analysis method of the PET degradation products mono(2-hydroxyethyl) terephthalic acid, bis(2-hydroxyethyl) terephthalic acid and terephthalic acid. Both were optimized regarding different solvents, pH values and drying processes. The accuracy of the measurements can be confirmed with sensitivity limits of 2.5-5 µM for the absorption method and 5-10 µM for the 1H NMR analysis. The combination of the described methods therefore allows a quantitative analysis by using bulk absorption coupled with a qualitative analysis through 1H NMR. The methods established in our work can potentially contribute to the development of suitable recycling strategies of PET using recombinant enzymes.

Population Balance Equations for Reactive Separation in Polymer Upcycling

Many polymer upcycling efforts aim to convert plastic waste into high-value liquid hydrocarbons. However, the subsequent cleavage of middle distillates to light gases can be problematic. The reactor often contains a vapor phase (light gases and middle distillates) and a liquid phase (molten polymers and waxes with a suspended or dissolved catalyst). Because the catalyst resides in the liquid phase, middle distillates that partition into the vapor phase are protected against further cleavage into light gases. In this paper, we consider a simple reactive separation strategy, in which a gas outflow removes the volatile products as they form. We combine vapor-liquid equilibrium models and population balance equations (PBEs) to describe polymer upcycling in a two-phase semibatch reactor. The results suggest that the temperature, headspace volume, and flow rate of the reactor can be used to tune selectivity toward the middle distillates, in addition to the molecular mechanism of catalysis. We anticipate that two-phase reactor models will be important in many polymer upcycling processes and that reactive separation strategies will provide ways to boost the yield of the desired products in these cases.

Chemically Recyclable Linear and Branched Polyethylenes Synthesized from Stoichiometrically Self-Balanced Telechelic Polyethylenes

High-density polyethylene (HDPE) is a widely used commercial plastic due to its excellent mechanical properties, chemical resistance, and water vapor barrier properties. However, less than 10% of HDPE is mechanically recycled, and the chemical recycling of HDPE is challenging due to the inherent strength of the carbon-carbon backbone bonds. Here, we report chemically recyclable linear and branched HDPE with sparse backbone ester groups synthesized from the transesterification of telechelic polyethylene macromonomers. Stoichiometrically self-balanced telechelic polyethylenes underwent transesterification polymerization to produce the PE-ester samples with high number-average molar masses of up to 111 kg/mol. Moreover, the transesterification polymerization of the telechelic polyethylenes and the multifunctional diethyl 5-(hydroxymethyl)isophthalate generated branched PE-esters. Thermal and mechanical properties of the PE-esters were comparable to those of commercial HDPE and tunable through control of the ester content in the backbone. In addition, branched PE-esters showed higher levels of melt strain hardening compared with linear versions. The PE-ester was depolymerized into telechelic macromonomers through straightforward methanolysis, and the resulting macromonomers could be effectively repolymerized to generate a high molar mass recycled PE-ester sample. This is a new and promising method for synthesizing and recycling high-molar-mass linear and branched PE-esters, which are competitive with HDPE and have easily tailorable properties.

A City-Wide Emissions Inventory of Plastic Pollution

A global agreement on plastic should have quantitative reduction targets for the emissions of plastic pollution and regular measurements to track success. Here, we present a framework for measuring plastic emissions, akin to greenhouse gas emissions, and demonstrate its utility by calculating a baseline measurement for the City of Toronto in Ontario, Canada. We identify relevant sources of plastic pollution in the city, calculate emissions for each source by multiplying activity data by emission factors for each source, and sum the emissions to obtain the total annual emissions of plastic pollution generated. Using Monte Carlo simulations, we estimate that 3,531 to 3,852 tonnes (T) of plastic pollution were emitted from Toronto in 2020. Littering is the largest source overall (3,099 T), and artificial turf is the largest source of microplastic (237 T). Quantifying source emissions can inform the most effective mitigation strategies to achieve reduction targets. We recommend this framework be scaled up and replicated in cities, states, provinces, and countries around the world to inform global reduction targets and measure progress toward reducing plastic pollution.

Development of Enzyme-Based Approaches for Recycling PET on an Industrial Scale

Pollution by plastics such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polyurethane (PUR), polyamide (PA), polystyrene (PS), and poly(ethylene terephthalate) (PET) is now gaining worldwide attention as a critical environmental issue, closely linked to climate change. Among them, PET is particularly prone to hydrolysis, breaking down into its constituents, ethylene glycol (EG) and terephthalate (TPA). Biorecycling or bioupcycling stands out as one of the most promising methods for addressing PET pollution. For dealing with pollution by the macrosize PET, a French company Carbios has developed a pilot-scale plant for biorecycling waste PET beverage bottles into new bottles using derivatives of thermophilic leaf compost cutinase (LCC). However, this system still provides significant challenges in its practical implementation. For the micro- or nanosize PET pollution that poses significant human health risks, including cancer, no industrial-scale approach has been established so far, despite the need to develop such technologies. In this Perspective, we explore the enhancement of the low activity and thermostability of the enzyme PETase to match that of LCC, along with the potential application of microbes and enzymes for the treatment of waste PET as microplastics. Additionally, we discuss the shortcomings of the current biorecycling protocols from a life cycle assessment perspective, covering aspects such as the diversity of PET-hydrolyzing enzymes in nature, the catalytic mechanism for crystallized PET, and more. We also provide an overview of the Ideonella sakaiensis system, highlighting its ability to operate and grow at moderate temperatures, in contrast to high-temperature processes.

Knowns and unknowns of plastic waste flows in the Netherlands

Plastic entering the environment is a growing threat for ecosystems. We estimate the annual mass of known Dutch plastic waste generated and littered and where it ends up. We use two methods: (1) a material flow analysis of plastic waste separately collected from 13 economic sectors (including households, industry and imports) and estimate the amount sent to processing plants or exported and (2) a mismanagement model from observations of litter (on Dutch beaches and riverbanks) plus estimates of inadequately managed exported plastic scraps entering the environment abroad. In 2017 (the most recent complete data set available), an estimate of 1990 (±111) kilotonnes [kt] of plastic waste was separately collected. The top three plastic waste generating sectors (74% of the total) were households, clothing and textiles, and importation. Our mismanagement model estimates that 4.3-21.2 kt enters the environment annually; almost all of which occurs in foreign countries after inadequate management of imported Dutch waste. We highlight unknowns, including the source and/or destination of imported (623 kt) and exported (514 kt) plastics, plastics in non-household mixed waste streams and the plastic fraction of some separately collected waste, for example, e-waste. Our results stress the need for improved monitoring and reporting of plastic waste. Beyond the Netherlands, our recommendations could also help other high-income countries' decision-makers reach their circular economy goals.

Review of emerging contaminants in green stormwater infrastructure: Antibiotic resistance genes, microplastics, tire wear particles, PFAS, and temperature

Green stormwater infrastructure is a growing management approach to capturing, infiltrating, and treating runoff at the source. However, there are several emerging contaminants for which green stormwater infrastructure has not been explicitly designed to mitigate and for which removal mechanisms are not yet well defined. This is an issue, as there is a growing understanding of the impact of emerging contaminants on human and environmental health. This paper presents a review of five emerging contaminants - antibiotic resistance genes, microplastics, tire wear particles, PFAS, and temperature - and seeks to improve our understanding of how green stormwater infrastructure is impacted by and can be designed to mitigate these emerging contaminants. To do so, we present a review of the source and transport of these contaminants to green stormwater infrastructure, specific treatment mechanisms within green infrastructure, and design considerations of green stormwater infrastructure that could lead to their removal. In addition, common removal mechanisms across these contaminants and limitations of green infrastructure for contaminant mitigation are discussed. Finally, we present future research directions that can help to advance the use of green infrastructure as a first line of defense for downstream water bodies against emerging contaminants of concern.

Causes of coastal waters pollution with nutrients, chemicals and plastics worldwide

Worldwide, coastal waters contain pollutants such as nutrients, plastics, and chemicals. Rivers export those pollutants, but their sources are not well studied. Our study aims to quantify river exports of nutrients, chemicals, and plastics to coastal waters by source and sub-basin worldwide. We developed a new MARINA-Multi model for 10,226 sub-basins. The global modelled river export to seas is approximately 40,000 kton of nitrogen, 1,800 kton of phosphorous, 45 kton of microplastics, 490 kton of macroplastics, 400 ton of triclosan and 220 ton of diclofenac. Around three-quarters of these pollutants are transported to the Atlantic and Pacific oceans. Diffuse sources contribute by 95-100 % to nitrogen (agriculture) and macroplastics (mismanaged waste) in seas. Point sources (sewage) contribute by 40-95 % to phosphorus and microplastics in seas. Almost 45 % of global sub-basin areas are multi-pollutant hotspots hosting 89 % of the global population. Our findings could support strategies for reducing multiple pollutants in seas.

Proteomes reveal metabolic capabilities of Yarrowia lipolytica for biological upcycling of polyethylene into high-value chemicals

IMPORTANCE

Sustainable processes for biological upcycling of plastic wastes in a circular bioeconomy are needed to promote decarbonization and reduce environmental pollution due to increased plastic consumption, incineration, and landfill storage. Strain characterization and proteomic analysis revealed the robust metabolic capabilities of Yarrowia lipolytica to upcycle polyethylene into high-value chemicals. Significant proteome reallocation toward energy and lipid metabolisms was required for robust growth on hydrocarbons with n-hexadecane as the preferential substrate. However, an apparent over-investment in these same categories to utilize complex depolymerized plastic (DP) oil came at the expense of protein biosynthesis, limiting cell growth. Taken together, this study elucidates how Y. lipolytica activates its metabolism to utilize DP oil and establishes Y. lipolytica as a promising host for the upcycling of plastic wastes.

Accumulation and exposure classifications of plastics in the different coastal habitats in the western Philippine archipelago

Studies consistently ranked the Philippines as one of the top contributors of plastic wastes leaking into the ocean. However, most of these were based on probabilities and estimates due to lack of comprehensive ground-truth data, resulting also in the limited understanding of the contributing factors and drivers of local pollution. This makes it challenging to develop science-driven and locally-contextualized policies and interventions to mitigate the problem. Here, 56 sites from different coastal habitats in the western Philippine archipelago were surveyed for macroplastics standing stock, representing geographic regions with varying demography and economic activities. Clustering of sites revealed three potential influencing factors to plastic accumulation: population density, wind and oceanic transport, and habitat type. Notably, the amount and types of dominant plastics per geographic region varied significantly. Single-use plastics (food packaging and sachets) were the most abundant in sites adjacent to densely populated and highly urbanized areas (Manila Bay and eastern Palawan), while fishing-related materials dominated in less populated and fishing-dominated communities (western Palawan and Bolinao), suggesting the local industries significantly contributing to the mismanaged plastics in the surveyed sites. Meanwhile, isolated areas such as islands were characterized by the abundance of buoyant materials (drinking bottles and hygiene product containers), emphasizing the role of oceanic transport and strong connectivity in the oceans. Exposure assessment also identified single-use and fishing-related plastics to be of "high exposure (Type 4)" due to their high abundance and high occurrence. These increase their chances of encountering and interacting with organisms and habitats, thus, resulting into more potential harm. This study is the first comprehensive work done in western Philippines, and results will help contextualize local pollution, facilitating more effective management and policymaking.

Marine plastics, circular economy, and artificial intelligence: A comprehensive review of challenges, solutions, and policies

Global plastic production is rapidly increasing, resulting in significant amounts of plastic entering the marine environment. This makes marine litter one of the most critical environmental concerns. Determining the effects of this waste on marine animals, particularly endangered organisms, and the health of the oceans is now one of the top environmental priorities. This article reviews the sources of plastic production, its entry into the oceans and the food chain, the potential threat to aquatic animals and humans, the challenges of plastic waste in the oceans, the existing laws and regulations in this field, and strategies. Using conceptual models, this study looks at a circular economy framework for energy recovery from ocean plastic wastes. It does this by drawing on debates about AI-based systems for smart management. In the last sections of the present research, a novel soft sensor is designed for the prediction of accumulated ocean plastic waste based on social development features and the application of machine learning computations. Plus, the best scenario of ocean plastic waste management with a concentration on both energy consumption and greenhouse gas emissions is discussed using USEPA-WARM modeling. Finally, a circular economy concept and ocean plastic waste management policies are modeled based on the strategies of different countries. We deal with green chemistry and the replacement of plastics derived from fossil sources.

Accelerating the Biodegradation of Poly(lactic acid) through the Inclusion of Plant Fibers: A Review of Recent Advances

As the global demand for plastics continues to grow, plastic waste is accumulating at an alarming rate with negative effects on the natural environment. The industrially compostable biopolymer poly(lactic acid) (PLA) is therefore being adopted for use in many applications, but the degradation of this material is slow under many end-of-life conditions. This Perspective explores the feasibility of accelerating the degradation of PLA through the formation of PLA-plant fiber composites. Topics include: (a) key properties of PLA, plant-based fibers, and biocomposites; (b) mechanisms of both hydrolytic degradation and biodegradation of PLA-fiber composites; (c) end-of-life degradation of PLA and PLA-plant fiber composites in aerobic and anaerobic conditions, relevant to compost, soil and seawater (aerobic), and landfills (anaerobic); and (d) sustainability and environmental impact of PLA and PLA-plant fiber composites, as evaluated using life cycle assessment. Additional degradation modes, including thermal and photodegradation, which are relevant during processing and use, have been omitted for clarity, as have other types of PLA biocomposites. Multiple studies have shown that the addition of some types of plant fibers to PLA (to form PLA biocomposites) accelerates both water transport in the material and hydrolysis, presenting a possible avenue for improving the end-of-life degradation of these materials. To facilitate the continued development of materials with enhanced biodegradability, we identify a need to implement testing protocols that can distinguish between different degradation mechanisms.

U.S. plastic waste exports: A state-by-state analysis pre- and post-China import ban

This study analyzes the regional implications of China's 2017 import ban on plastic waste by examining U.S. census data. A statistically significant decrease in total U.S. plastic waste exports was found, dropping from about 1.4 million tons to 0.6 million tons in the post-ban period. California remained the top exporter, throughout both pre- and post-ban periods, while South Carolina exhibited the highest per capita exports. Malaysia emerged as the largest importer of U.S. plastic waste, followed by Vietnam, Indonesia, and Thailand. The ban also led to a change in the composition of the exported plastic waste. Ethylene polymers increased from 32.6% of total exports in the pre-ban period to 46.9% in the post-ban period. Other plastics (vinyl chloride polymers, styrene polymers, and for plastics not elsewhere specified or included) decreased from 67.4% of total exports in the pre-ban period to 53.1% in the post-ban period. Moreover, we found that exporting plastic waste has significant environmental and human health impacts. For example, the Global Warming Potential (GWP) decreased from 20 million tons CO2-eq in the scenario where 100% of plastics are exported, or 25 million tons exported from the U.S. since 2002, to -11.1 million tons CO2-eq in the scenario where 100% of plastics are treated domestically. Transportation exacerbates these impacts for exported waste scenarios, increasing to 5.4 million tons CO2-eq when plastics are exported by ship while decreasing to 0.9 million tons CO2-eq for domestic treatment. Although exporting plastic waste is initially cost-effective, our study highlights that investing in domestic waste management can yield significant long-term benefits, considering the environmental and public health impacts. Therefore, it is crucial to prioritize context-specific solutions to address the challenges of the evolving global plastic waste landscape.

Microplastics in landfill leachate: Sources, detection, occurrence, and removal

Due to the accumulation of an enormous amount of plastic waste from municipal and industrial sources in landfills, landfill leachate is becoming a significant reservoir of microplastics. The release of microplastics from landfill leachate into the environment can have undesirable effects on humans and biota. This study provides the state of the science regarding the source, detection, occurrence, and remediation of microplastics in landfill leachate based on a comprehensive review of the scientific literature, mostly in the recent decade. Solid waste and wastewater treatment residue are the primary sources of microplastics in landfill leachate. Microplastic concentration in raw and treated landfill leachate varied between 0-382 and 0-2.7 items L-1. Microplastics in raw landfill leachate are largely attributable to local plastic waste production and solid waste management practices. Polyethylene, polystyrene, and polypropylene are the most prevalent microplastic polymers in landfill leachate. Even though the colors of microplastics are primarily determined by their parent plastic waste, the predominance of light-colored microplastics in landfill leachate indicates long-term degradation. The identified morphologies of microplastics in leachate from all published sources contain fiber and fragments the most. Depending on the treatment method, leachate treatment processes can achieve microplastic removal rates between 3% and 100%. The review also provides unique perspectives on microplastics in landfill leachate in terms of remediation, final disposal, fate and transport among engineering systems, and source reduction, etc. The landfill-wastewater treatment plant loop and bioreactor landfills present unique difficulties and opportunities for managing microplastics induced by landfill leachate.

Assessing the impact of chronic and acute plastic pollution from construction activities and other anthropogenic sources: A case study from the coast of Antofagasta, Chile

Plastic pollution is a critical environmental issue with far-reaching and not yet fully explored consequences. This study uncovered a significant source of plastic contamination arising from improper application and management of expanded polystyrene (EPS) utilised as expansion joints at a construction site near the coast of Antofagasta, Chile. Through meticulous field observations and calculations, we estimate that a staggering 82.9 million EPS spheres have the potential to be released into the environment from the 7.62 m3 of this material used for the construction of this coastal promenade, constituting a chronic source of pollution. Despite the ongoing construction, we have already evidenced mechanical fragmentation and dispersion of EPS microplastic pollution in the surrounding natural environment. To our knowledge, this is the first study that documents misused construction materials contributing to plastic pollution. In addition to the EPS pollution, our findings reveal an alarming accumulation of litter - an acute pollution source - including plastic cups, bottles, carrier bags, and several other construction materials (e.g. plastic nets, films) that are exacerbating the pollution problems within the region and potentially endangering marine and terrestrial organisms. These observations highlight the urgent need for mitigating measures and intervention policies targeting construction-related plastic and microplastic pollution, along with a more robust regulatory framework for construction activities as well as adequate surveillance and enforcement.

A Review of Biodegradable Plastics: Chemistry, Applications, Properties, and Future Research Needs

Environmental concerns over waste plastics' effect on the environment are leading to the creation of biodegradable plastics. Biodegradable plastics may serve as a promising approach to manage the issue of environmental accumulation of plastic waste in the ocean and soil. Biodegradable plastics are the type of polymers that can be degraded by microorganisms into small molecules (e.g., H2O, CO2, and CH4). However, there are misconceptions surrounding biodegradable plastics. For example, the term "biodegradable" on product labeling can be misconstrued by the public to imply that the product will degrade under any environmental conditions. Such misleading information leads to consumer encouragement of excessive consumption of certain goods and increased littering of products labeled as "biodegradable". This review not only provides a comprehensive overview of the state-of-the-art biodegradable plastics but also clarifies the definitions and various terms associated with biodegradable plastics, including oxo-degradable plastics, enzyme-mediated plastics, and biodegradation agents. Analytical techniques and standard test methods to evaluate the biodegradability of polymeric materials in alignment with international standards are summarized. The review summarizes the properties and industrial applications of previously developed biodegradable plastics and then discusses how biomass-derived monomers can create new types of biodegradable polymers by utilizing their unique chemical properties from oxygen-containing functional groups. The terminology and methodologies covered in the paper provide a perspective on directions for the design of new biodegradable polymers that possess not only advanced performance for practical applications but also environmental benefits.