Potential of Ethenone (Ketene) to Contribute to Electronic Cigarette, or Vaping, Product Use-associated Lung Injury

Conditions Leading to Ketene Formation in Vaping Devices and Implications for Public Health

The outbreak of e-cigarette or vaping use-associated lung injury (EVALI) in the United States in 2019 led to a total of 2807 hospitalizations with 68 deaths. While the exact causes of this vaping-related lung illness are still being debated, laboratory analyses of products from victims of EVALI have shown that vitamin E acetate (VEA), an additive in some tetrahydrocannabinol (THC)-containing products, is strongly linked to the EVALI outbreak. Because of its similar appearance and viscosity to pure THC oil, VEA was used as a diluent agent in cannabis oils in illicit markets. A potential mechanism for EVALI may involve VEA's thermal decomposition product, ketene, a highly poisonous gas, being generated under vaping conditions. In this study, a novel approach was developed to evaluate ketene production from VEA vaping under measurable temperature conditions in real-world devices. Ketene in generated aerosols was captured by two different chemical agents and analyzed by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography with tandem mass spectrometry (LC-MS/MS). The LC-MS/MS method takes advantage of the high sensitivity and specificity of tandem mass spectrometry and appears to be more suitable than GC-MS for the analysis of large batches of samples. Our results confirmed the formation of ketene when VEA was vaped. The production of ketene increased with repeat puffs and showed a correlation to temperatures (200 to 500 °C) measured within vaping devices. Device battery power strength, which affects the heating temperature, plays an important role in ketene formation. In addition to ketene, the organic oxidant duroquinone was also obtained as another thermal degradation product of VEA. Ketene was not detected when vitamin E was vaped under the same conditions, confirming the importance of the acetate group for its generation.

Forecasting vaping health risks through neural network model prediction of flavour pyrolysis reactions

Vaping involves the heating of chemical solutions (e-liquids) to high temperatures prior to lung inhalation. A risk exists that these chemicals undergo thermal decomposition to new chemical entities, the composition and health implications of which are largely unknown. To address this concern, a graph-convolutional neural network (NN) model was used to predict pyrolysis reactivity of 180 e-liquid chemical flavours. The output of this supervised machine learning approach was a dataset of probability ranked pyrolysis transformations and their associated 7307 products. To refine this dataset, the molecular weight of each NN predicted product was automatically correlated with experimental mass spectrometry (MS) fragmentation data for each flavour chemical. This blending of deep learning methods with experimental MS data identified 1169 molecular weight matches that prioritized these compounds for further analysis. The average number of discrete matches per flavour between NN predictions and MS fragmentation was 6.4 with 92.8% of flavours having at least one match. Globally harmonized system classifications for NN/MS matches were extracted from PubChem, revealing that 127 acute toxic, 153 health hazard and 225 irritant classifications were predicted. This approach may reveal the longer-term health risks of vaping in advance of clinical diseases emerging in the general population.

Complexity of Translating Analytics to Recent Cannabis Use and Impairment

While current analytical methodologies can readily identify cannabis use, definitively establishing recent use within the impairment window has proven to be far more complex, requiring a new approach. Recent studies have shown no direct relationship between impairment and Δ9-tetra-hydrocannabinol (Δ9-THC) concentrations in blood or saliva, making legal "per se" Δ9-THC limits scientifically unjustified. Current methods that focus on Δ9-THC and/or metabolite concentrations in blood, saliva, urine, or exhaled breath can lead to false-positive results for recent use due to the persistence of Δ9-THC well outside of the typical 3-4 h window of potential impairment following cannabis inhalation. There is also the issue of impairment due to other intoxicating substances-just because a subject exhibits signs of impairment and cannabis use is detected does not rule out the involvement of other drugs. Compounding the matter is the increasing popularity of hemp-derived cannabidiol (CBD) products following passage of the 2018 Farm Bill, which legalized industrial hemp in the United States. Many of these products contain varying levels of Δ9-THC, which can lead to false-positive tests for cannabis use. Furthermore, hemp-derived CBD is used to synthesize Δ8-THC, which possesses psychoactive properties similar to Δ9-THC and is surrounded by legal controversy. For accuracy, analytical methods must be able to distinguish the various THC isomers, which have identical masses and exhibit immunological cross-reactivity. A new testing approach has been developed based on exhaled breath and blood sampling that incorporates kinetic changes and the presence of key cannabinoids to detect recent cannabis use within the impairment window without the false-positive results seen with other methods. The complexity of determining recent cannabis use that may lead to impairment demands such a comprehensive method so that irresponsible users can be accurately detected without falsely accusing responsible users who may unjustly suffer harsh, life-changing consequences.

Nicotine or marijuana vaping exposure during pregnancy and altered immune responses in offspring

Electronic nicotine delivery systems (ENDS) - which include electronic cigarettes or e-cigarettes, or simply e-cigs, and marijuana vaping have become increasingly popular. ENDS devices have been established as one of the tobacco quit methods and promoted to be safer compared to traditional tobacco cigarettes. Emerging evidence demonstrates that e-cigarette and marijuana vape use can be harmful, with potential associations with cancer. Herein, we summarize the level of evidence to date for altered immune response, with a focus on cancer risks in the offspring after maternal use of, or aerosol exposures from, ENDS or marijuana vape during pregnancy. From 27 published articles retrieved from PubMed, we sought to find out identified carcinogens in ENDS aerosols and marijuana vapor, which cross the placental barrier and can increase cancer risk in the offspring. Carcinogens in vaping aerosols include aldehydes, metals, tobacco-specific nitrosamines, tobacco alkaloids, polycyclic aromatic hydrocarbons, and volatile organic compounds. Additionally, there was only one passive vaping exposure case study on a human fetus, which noted that glycerol, aluminum, chromium, nickel, copper, zinc, selenium, and lead crossed from the mother to the offspring's cord blood. The carcinogens (metals) in that study were at lower concentrations compared to the mother's biological matrices. Lastly, we observed that in utero exposures to ENDS-associated chemicals can occur in vital organs such as the lungs, kidneys, brain, bladder, and heart. Any resulting DNA damage increases the risk of tumorigenesis. Future epidemiological studies are needed to examine the effects of passive aerosol exposures from existing and emerging electronic nicotine and marijuana products on developing offspring to cancer.

Metalloporphyrin reduced C70 fullerenes as adsorbents and detectors of ethenone; A DFT, NBO, and TD-DFT study

In the present work, the structure and electronic properties of Ti-, Cr-, Fe-, Ni-, Zn-, and Cu-inserted in porphyrin-reduced C70 fullerenes (TM-PIC70Fs) and their interactions with the ethenone were studied using DFT, NBO, and TD-DFT at CAM-B3LYP/6-31G(d) level of theory. 2.89-3.83 and 4.02-4.56 eV were obtained for the HOMO-LUMO gap energies and work functions of TM-PIC70Fs, respectively, compared with 3.76 and 4.54 eV for PIC70F. Among considered TM-PIC70Fs, the adsorption of the ethenone on Ti-PIC70F appreciably changed the HOMO-LUMO energy gap and work function. Consequently, Ti-PIC70F may be used as the ethenone's electronic conductivity and work function types sensor. According to calculated UV-visible spectra, the ethenone adsorption may change the color of Fe- and Ti-PIC70Fs. Therefore, they can be used as color-changing sensors of ethenone. In addition, Ti-, Cr-, Fe-, and Zn-PIC70Fs can be employed as suitable adsorbents of ethenone. Among proper sensors and adsorbents of ethenone, Cr-, Fe-, and Zn-PIC70Fs may be recovered and reused.

The E-cigarette or Vaping Product Use-Associated Lung Injury Epidemic: Pathogenesis, Management, and Future Directions: An Official American Thoracic Society Workshop Report

E-cigarette or vaping product use-associated lung injury (EVALI) is a severe pulmonary illness associated with the use of e-cigarettes or vaping products that was officially identified and named in 2019. This American Thoracic Society workshop was convened in 2021 to identify and prioritize research and regulatory needs to adequately respond to the EVALI outbreak and to prevent similar instances of disease associated with e-cigarette or vaping product use. An interdisciplinary group of 26 experts in adult and pediatric clinical care, public health, regulatory oversight, and toxicology were convened for the workshop. Four major topics were examined: 1) the public health and regulatory response to EVALI; 2) EVALI clinical care; 3) mechanisms contributing to EVALI; and 4) needed actions to address the health effects of EVALI. Oral presentations and group discussion were the primary modes used to identify top priorities for addressing EVALI. Initiatives including a national EVALI case registry and biorepository, integrated electronic medical record coding system, U.S. Food and Drug Administration regulation and enforcement of nicotine e-cigarette standards, regulatory authority over nontobacco-derived e-cigarettes, training in evaluating exogenous exposures, prospective clinical studies, standardized clinical follow-up assessments, ability to more readily study effects of cannabinoid e-cigarettes, and research to identify biomarkers of exposure and disease were identified as critical needs. These initiatives will require substantial federal investment as well as changes to regulatory policy. Overall, the workshop identified the need to address the root causes of EVALI to prevent future outbreaks. An integrated approach from multiple perspectives is required, including public health; clinical, basic, and translational research; regulators; and users of e-cigarettes. Improving the public health response to reduce the risk of another substantial disease-inducing event depends on coordinated actions to better understand the inhalational toxicity of these products, informing the public of the risks, and developing and enforcing regulatory standards for all e-cigarettes.

A First-Tier Framework for Assessing Toxicological Risk from Vaporized Cannabis Concentrates

Vaporization is an increasingly prevalent means to consume cannabis, but there is little guidance for manufacturers or regulators to evaluate additive safety. This paper presents a first-tier framework for regulators and cannabis manufacturers without significant toxicological expertise to conduct risk assessments and prioritize additives in cannabis concentrates for acceptance, elimination, or further evaluation. Cannabinoids and contaminants (e.g., solvents, pesticides, etc.) are excluded from this framework because of the complexity involved in their assessment; theirs would not be a first-tier toxicological assessment. Further, several U.S. state regulators have provided guidance for major cannabinoids and contaminants. Toxicological risk assessment of cannabis concentrate additives, like other types of risk assessment, includes hazard assessment, dose-response, exposure assessment, and risk characterization steps. Scarce consumption data has made exposure assessment of cannabis concentrates difficult and variable. Previously unpublished consumption data collected from over 54,000 smart vaporization devices show that 50th and 95th percentile users consume 5 and 57 mg per day on average, respectively. Based on these and published data, we propose assuming 100 mg per day cannabis concentrate consumption for first-tier risk assessment purposes. Herein, we provide regulators, cannabis manufacturers, and consumers a preliminary methodology to evaluate the health risks of cannabis concentrate additives.

Vaping Cannabinoid Acetates Leads to Ketene Formation

Δ⁸-THC acetate is a relatively new psychoactive cannabis product that is available online and in vape shops across the United States since it is currently largely unregulated. Because it contains a similar substructure to vitamin E acetate, which has been shown to form the poison gas ketene during vaping, we investigated potential ketene formation from Δ⁸-THC acetate, as well as two other cannabinoids acetates, CBN acetate and CBD acetate, under vaping conditions. Ketene was consistently observed in vaped condensates from all three cannabinoid acetates as well as from a commercial Δ⁸-THC acetate product purchased online.

Characterizing California licensure status and tobacco user experience with adverse events using Yelp data

•

Yelp is an online business listing platform to rate tobacco/vaping goods retailers.

•

CA licensed tobacco/vape stores data was cross-referenced with Yelp listings.

•

We identified Yelp tobacco/vape listings not licensed in California’s database.

•

Identified counterfeit/expired product selling, adverse events, underage selling.

•

Results identify unauthorized tobacco/vape stores and customer safety issues.

Various tobacco vendors, including alternative tobacco product sellers, are listed on the popular crowdsourced business listing platform Yelp. Yelp is used to rate and choose tobacco, electronic nicotine delivery systems (ENDS) goods/services and includes self-reporting of user experiences with shops and products. We cross-referenced California Department of Tax and Fee Administration (CDTFA) licensed tobacco, vape, and head shop retail stores with publicly available Yelp business listings to identify licensed and unlicensed stores in California. We extracted metadata associated with store accounts and analyzed user comments and ratings for discussion of tobacco-related complaints and adverse events. We detected a total of 3,717 shops that were categorized as tobacco/vape/head shops on Yelp and by cross-referencing with CDTFA data, licensed businesses accounted for 49.5% (n = 1,841), licensed individual retailers 31.6% (n = 1,174), and suspected unlicensed storefronts 18.9% (n = 702). Businesses and individuals with a state tobacco retail license received a higher average rating from Yelp users (3.86 out of 5) compared to unlicensed shops (3.57) (p < 0.001). Additionally, 4,682 unique comments about licensed businesses, 1,535 unique comments about individual retailers, and 560 unique comments about unlicensed vendors were reviewed, with themes including discussion about defective and counterfeit products and adverse events including coughing, difficulty breathing and reports of hospitalization detected. In contrast, comments about licensed stores predominantly discussed customer service issues. Close to one-fifth of tobacco, vape and/or head shops reviewed on Yelp were not in CDTFA’s licensure database. Overall self-reported tobacco user experiences appeared to differ in content and severity based on whether an establishment was licensed. These results have the potential to identify unauthorized stores and adverse events associated with their tobacco and vaping products or services.

Vaping-Associated Lung Injury: A Review

Since commercial development in 2003, the usage of modern electronic cigarette (e-cigarette) continues to increase amongst people who have never smoked, ex-smokers who have switched to e-cigarettes, and dual-users of both conventional cigarettes and e-cigarettes. With such an increase in use, knowledge of the irritative, toxic and potential carcinogenic effects on the lungs is increasing. This review article will discuss the background of e-cigarettes, vaping devices and explore their popularity. We will further summarise the available literature describing the mechanism of lung injury caused by e-cigarette or vaping use.

E-cigarette vaping associated acute lung injury (EVALI): state of science and future research needs

"E-Cigarette (e-cig) Vaping-Associated Acute Lung Injury" (EVALI) has been linked to vitamin-E-acetate (VEA) and Δ-9-tetrahydrocannabinol (THC), due to their presence in patients' e-cigs and biological samples. Lacking standardized methodologies for patients' data collection and comprehensive physicochemical/toxicological studies using real-world-vapor exposures, very little data are available, thus the underlying pathophysiological mechanism of EVALI is still unknown. This review aims to provide a comprehensive and critical appraisal of existing literature on clinical/epidemiological features and physicochemical-toxicological characterization of vaping emissions associated with EVALI. The literature review of 161 medical case reports revealed that the predominant demographic pattern was healthy white male, adolescent, or young adult, vaping illicit/informal THC-containing e-cigs. The main histopathologic pattern consisted of diffuse alveolar damage with bilateral ground-glass-opacities at chest radiograph/CT, and increased number of macrophages or neutrophils and foamy-macrophages in the bronchoalveolar lavage. The chemical analysis of THC/VEA e-cig vapors showed a chemical difference between THC/VEA and the single THC or VEA. The chemical characterization of vapors from counterfeit THC-based e-cigs or in-house-prepared e-liquids using either cannabidiol (CBD), VEA, or medium-chain triglycerides (MCT), identified many toxicants, such as carbonyls, volatile organic compounds, terpenes, silicon compounds, hydrocarbons, heavy metals, pesticides and various industrial/manufacturing/automotive-related chemicals. There is very scarce published toxicological data on emissions from THC/VEA e-liquids. However, CBD, MCT, and VEA emissions exert varying degrees of cytotoxicity, inflammation, and lung damage, depending on puffing topography and cell line. Major knowledge gaps were identified, including the need for more systematic-standardized epidemiological surveys, comprehensive physicochemical characterization of real-world e-cig emissions, and mechanistic studies linking emission properties to specific toxicological outcomes.

Analysis of the Aerosol Generated from Tetrahydrocannabinol, Vitamin E Acetate, and Their Mixtures

E-cigarette, or vaping, product use-associated lung injury (EVALI) outbreak was linked to vitamin E acetate (VEA) used as a solvent for tetrahydrocannabinol (THC). Several studies were conducted to assess the products of VEA (and THC/VEA mixtures) thermal degradation as a result of vaporizing/aerosolizing from a traditional type (coil-cotton wick) and ceramic type coil vape pens. The particle size distribution (PSD) of VEA aerosol and the temperature VEA and THC/VEA mixtures are heated to were also measured for a few types of traditional and ceramic vape pens. The current study assessed the PSD of the aerosol generated from THC, VEA, and a number of THC/VEA mixtures using a dab-type vape pen under two different temperature settings and two puffing flow rates. Thermal degradation of THC, VEA, and THC/VEA mixtures were also assessed, and coil temperature was measured. Results showed the dependence of the PSD upon the chemical content of the aerosolized mixture as well as upon the puffing flow rate. Minimal thermal degradation was observed. Flaws in the vape pen's design, which most likely affected results, were detected. The suitability of VEA, THC, and THC/VEA mixtures with certain types of vape pens was discussed.

Thermography of cannabis extract vaporization cartridge heating coils in temperature- and voltage-controlled systems during a simulated human puff

Vaporized cannabis is believed to be safer than smoking, but when heated to excessive temperatures nearing combustion (>900 °C) harmful byproducts may form. While some cannabis extract vaporizers operate well below these high temperatures, heating coil temperatures obtained during actual use are frequently not reported and many operate at high temperatures. We report on two major objectives: 1) development of an infrared thermography method to measure heating coil temperatures in cannabis extract vaporizers during a simulated puff and 2) a comparison of temperature- to voltage- controlled cannabis extract vaporization systems during a puff. Infrared thermography was used to measure heating coil temperatures in one temperature-controlled and two voltage-controlled systems. The cartridges were modified for direct line-of-sight on the heating coils, the wick and coils were saturated with cannabis extract, and fixtures were developed to force two liters per minute air flow past the coils for the full duration of the puff allowed by the device. The voltage-controlled systems produced higher temperatures with greater variability than the temperature-controlled system. At the highest temperature setting (420 °C) the temperature-controlled system reached an average heating coil temperature of 420 ± 9.5 °C whereas the 4.0V setting on the variable voltage system reached an average temperature of 543 ± 95.9 °C and the single voltage (3.2V) system an average of 450 ± 60.8 °C. The average temperature at the lowest setting (270 °C) on the temperature-controlled system was 246 ± 5.1 °C and the variable voltage system (2.4V) was 443 ± 56.1 °C. Voltage alone was a poor indicator of coil temperature and only the temperature-controlled system consistently maintained temperatures less than 400 °C for the full puff duration. These lower temperatures could reduce the likelihood of harmful thermal degradation products and thus may reduce potential health risk to consumers when vaporizing cannabis extracts.

Chemical Emissions From Heated Vitamin E Acetate—Insights to Respiratory Risks From Electronic Cigarette Liquid Oil Diluents Used in the Aerosolization of Δ9-THC-Containing Products

As of February 18, 2020, the e-cigarette, or vaping, product use associated lung injury (EVALI) outbreak caused the hospitalization of a total of 2,807 patients and claimed 68 lives in the United States. Though investigations have reported a strong association with vitamin E acetate (VEA), evidence from reported EVALI cases is not sufficient to rule out the contribution of other chemicals of concern, including chemicals in either THC or non-THC products. This study characterized chemicals evolved when diluent oils were heated to temperatures that mimic e-cigarette, or vaping, products (EVPs) to investigate production of potentially toxic chemicals that might have caused lung injury. VEA, vitamin E, coconut, and medium chain triglyceride (MCT) oil were each diluted with ethanol and then tested for constituents and impurities using a gas chromatograph mass spectrometer (GC/MS). Undiluted oils were heated at 25°C (control), 150°C, and 250°C in an inert chamber to mimic a range of temperatures indicative of aerosolization from EVPs. Volatilized chemicals were collected using thermal desorption tubes, analyzed using a GC/MS, and identified. Presence of identified chemicals was confirmed using retention time and ion spectra matching with analytic standards. Direct analysis of oils, as received, revealed that VEA and vitamin E were the main constituents of their oils, and coconut and MCT oils were nearly identical having two main constituents: glycerol tricaprylate and 2-(decanoyloxy) propane-1,3-diyl dioctanoate. More chemicals were measured and with greater intensities when diluent oils were heated at 250°C compared to 150°C and 25°C. Vitamin E and coconut/MCT oils produced different chemical emissions. The presence of some identified chemicals is of potential health consequence because many are known respiratory irritants and acute respiratory toxins. Exposure to a mixture of hazardous chemicals may be relevant to the development or exacerbation of EVALI, especially when in concert with physical damage caused by lung deposition of aerosols produced by aerosolizing diluent oils.

Vitamin E Acetate Determination in Vaping Liquids and Non-targeted Analysis of Vaping Emissions of Diluents of Concern, Vitamin E Acetate and Medium-Chain Triglycerides Oil

During the summer of 2019, cases of lung injury associated with vaping emerged in North America, including among individuals who reported exclusive use of nicotine vaping liquids. Once vitamin E acetate was identified as a potential causative agent a quantitative method based on a simple sample dilution, separation by gas chromatography and analysis by triple quadrupole mass spectrometry (GC MSMS) was developed. Method detection limit (MDL) and limit of quantification (LOQ) were determined at 0.159 µg/mL and 0.505 µg/mL, respectively. The analysis was performed on a subset of 203 commercially sourced nicotine containing vaping liquids of various flavour profile and nicotine range (nicotine free-59 mg/mL) from an internal inventory. The target analyte, Vitamin E Acetate, was not detected in any samples analyzed, as expected, given the reported detection in literature and high association of the chemical with cannabis and not nicotine containing vaping products.

Nonmedical Cannabis Use: Patterns and Correlates of Use, Exposure, and Harm, and Cancer Risk

Cannabis has certain health benefits, but some people may experience harms from use. Co-use of tobacco and cannabis is common. Smoke from cannabis contains many of the same carcinogens and toxicants as the smoke from tobacco, raising concerns that cannabis smoking may be a risk factor for cancer. With growing access to and acceptance of medical and nonmedical cannabis, there is an urgent need to understand the risks and benefits of the current modes of cannabis use and how cannabis may be associated with cancer risk. This monograph summarizes a session from a National Cancer Institute Symposium on nonmedical cannabis use and cancer risk. We had 3 objectives: describe the relation between nonmedical cannabis use and cancer risk, delineate patterns and correlates of cannabis co-use with tobacco, and document potentially harmful inhalational exposure resulting from smoked and vaped cannabis. Methodological limitations in the literature and future research recommendations are provided.

Modeled Respiratory Tract Deposition of Aerosolized Oil Diluents Used in Δ9-THC-Based Electronic Cigarette Liquid Products

Electronic cigarette, or vaping, products (EVP) heat liquids ("e-liquids") that contain substances (licit or illicit) and deliver aerosolized particles into the lungs. Commercially available oils such as Vitamin-E-acetate (VEA), Vitamin E oil, coconut, and medium chain triglycerides (MCT) were often the constituents of e-liquids associated with an e-cigarette, or vaping, product use-associated lung injury (EVALI). The objective of this study was to evaluate the mass-based physical characteristics of the aerosolized e-liquids prepared using these oil diluents. These characteristics were particle size distributions for modeling regional respiratory deposition and puff-based total aerosol mass for estimating the number of particles delivered to the respiratory tract. Four types of e-liquids were prepared by adding terpenes to oil diluents individually: VEA, Vitamin E oil, coconut oil, and MCT. A smoking machine was used to aerosolize each e-liquid at a predetermined puff topography (volume of 55 ml for 3 s with 30-s intervals between puffs). A cascade impactor was used to collect the size-segregated aerosol for calculating the mass median aerodynamic diameter (MMAD) and geometric standard deviation (GSD). The respiratory deposition of EVP aerosols on inhalation was estimated using the Multiple-Path Particle Dosimetry model. From these results, the exhaled fraction of EVP aerosols was calculated as a surrogate of secondhand exposure potential. The MMAD of VEA (0.61 μm) was statistically different compared to MCT (0.38 μm) and coconut oil (0.47 μm) but not to Vitamin E oil (0.58 μm); p < 0.05. Wider aerosol size distribution was observed for VEA (GSD 2.35) and MCT (GSD 2.08) compared with coconut oil (GSD 1.53) and Vitamin E oil (GSD 1.55). Irrespective of the statistical differences between MMADs, dosimetry modeling resulted in the similar regional and lobular deposition of particles for all e-liquids in the respiratory tract. The highest (~0.08 or more) fractional deposition was predicted in the pulmonary region, which is consistent as the site of injury among EVALI cases. Secondhand exposure calculations indicated that a substantial amount of EVP aerosols could be exhaled, which has potential implications for bystanders. The number of EVALI cases has declined with the removal of VEA; however, further research is required to investigate the commonly available commercial ingredients used in e-liquid preparations.

Effects of E-Cigarette Flavoring Chemicals on Human Macrophages and Bronchial Epithelial Cells

E-cigarettes utilize a wide range of flavoring chemicals with respiratory health effects that are not well understood. In this study, we used pulmonary-associated cell lines to assess the in vitro cytotoxic effects of 30 flavoring chemicals. Human bronchial epithelial cells (BEAS-2B) and both naïve and activated macrophages (THP-1) were treated with 10, 100, and 1000 µM of flavoring chemicals and analyzed for changes in viability, cell membrane damage, reactive oxygen species (ROS) production, and inflammatory cytokine release. Viability was unaffected for all chemicals at the 10 and 100 µM concentrations. At 1000 µM, the greatest reductions in viability were seen with decanal, hexanal, nonanal, cinnamaldehyde, eugenol, vanillin, alpha-pinene, and limonene. High amounts of ROS were elicited by vanillin, ethyl maltol, and the diketones (2,3-pentanedione, 2,3-heptanedione, and 2,3-hexanedione) from both cell lines. Naïve THP-1 cells produced significantly elevated levels of IL-1β, IL-8, and TNF-α when exposed to ethyl maltol and hexanal. Activated THP-1 cells released increased IL-1β and TNF-α when exposed to ethyl maltol, but many flavoring chemicals had an apparent suppressive effect on inflammatory cytokines released by activated macrophages, some with varying degrees of accompanying cytotoxicity. The diketones, L-carvone, and linalool suppressed cytokine release in the absence of cytotoxicity. These findings provide insight into lung cell cytotoxicity and inflammatory cytokine release in response to flavorings commonly used in e-cigarettes.

Major Constituents of Cannabis Vape Oil Liquid, Vapor and Aerosol in California Vape Oil Cartridge Samples

During the E-cigarette or Vaping product use Associated Lung Injury (EVALI) outbreak of August 2019 to February 2020, the California Department of Public Health, Food and Drug Laboratory Branch received numerous cannabis vape oil cartridge investigation samples from throughout the state. Many of these products were directly linked to patients; others were collected as part of investigations. We determined the major ingredients and additives in twelve unused cannabis vape oil cartridge samples obtained before (n = 2) and during the EVALI outbreak (n = 10) in California from September 2018 to December 2019. We tested for major constituents in vape oil liquid, vape oil vapor, and vape oil aerosol phases. A nontargeted Gas Chromatography Mass Spectrometry direct injection screening method was developed for vape oils, a headspace heating module used for vape oil vapors and a solid-phase microextraction (SPME) vaping rig for aerosols generated by vaping. We have identified more than 100 terpenes and natural extracts, 19 cannabinoids, and other potential toxic additives such as Vitamin E Acetate, Polyethylene Glycols, and Medium Chain Triglycerides. We determined more terpenes and minor cannabinoids can be produced via vaporizing and aerosolizing the vape oil. Delta9-THC and potential toxic additives were found at lower levels in the vapor and aerosol than in the vape liquid.

Liquid chromatography-tandem mass spectrometry method for measuring vitamin E acetate in bronchoalveolar lavage fluid

We investigated the suitability of isotope-dilution liquid chromatography coupled with tandem mass spectrometry for identifying vitamin E acetate (VEA) in bronchoalveolar lavage (BAL) fluid. This new method demonstrates high accuracy, selectivity, and sensitivity, with mean recoveries higher than 90%, coefficients of variation ranging from 1.5% to 4.5%, and a limit of detection of 1.10 ng/mL. Calibration curves were linear (R² > 0.99). The linear range and detection limit of the method were adequate for identifying VEA in 48 of 51 BAL fluid samples collected from people with lung injury resulting from e-cigarettes, or vaping, product use. We conclude that this method is an effective tool for studying VEA accumulation in lungs caused by using e-cigarettes, or vaping, products that contain VEA.

Toxicology of flavoring- and cannabis-containing e-liquids used in electronic delivery systems

Electronic cigarettes (e-cigarettes) were introduced in the United States in 2007 and by 2014 they were the most popular tobacco product amongst youth and had overtaken use of regular tobacco cigarettes. E-cigarettes are used to aerosolize a liquid (e-liquid) that the user inhales. Flavorings in e-liquids is a primary reason for youth to initiate use of e-cigarettes. Evidence is growing in the scientific literature that inhalation of some flavorings is not without risk of harm. In this review, 67 original articles (primarily cellular in vitro) on the toxicity of flavored e-liquids were identified in the PubMed and Scopus databases and evaluated critically. At least 65 individual flavoring ingredients in e-liquids or aerosols from e-cigarettes induced toxicity in the respiratory tract, cardiovascular and circulatory systems, skeletal system, and skin. Cinnamaldehyde was most frequently reported to be cytotoxic, followed by vanillin, menthol, ethyl maltol, ethyl vanillin, benzaldehyde and linalool. Additionally, modern e-cigarettes can be modified to aerosolize cannabis as dried plant material or a concentrated extract. The U.S. experienced an outbreak of lung injuries, termed e-cigarette, or vaping, product use-associated lung injury (EVALI) that began in 2019; among 2,022 hospitalized patients who had data on substance use (as of January 14, 2020), 82% reported using a delta-9-tetrahydrocannabinol (main psychoactive component in cannabis) containing e-cigarette, or vaping, product. Our literature search identified 33 articles related to EVALI. Vitamin E acetate, a diluent and thickening agent in cannabis-based products, was strongly linked to the EVALI outbreak in epidemiologic and laboratory studies; however, e-liquid chemistry is highly complex, and more than one mechanism of lung injury, ingredient, or thermal breakdown product may be responsible for toxicity. More research is needed, particularly with regard to e-cigarettes (generation, power settings, etc.), e-liquids (composition, bulk or vaped form), modeled systems (cell type, culture type, and dosimetry metrics), biological monitoring, secondhand exposures and contact with residues that contain nicotine and flavorings, and causative agents and mechanisms of EVALI toxicity.

E-cigarette exposures, respiratory tract infections, and impaired innate immunity: a narrative review

Electronic cigarettes (e-cigarettes) are commonly used devices by adolescents and young adults. Since their introduction, the popularity of e-cigarettes has increased significantly with close to twenty percent of United States high school students reporting current use in 2020. As the number of e-cigarette users has increased, so have reports of vaping related health complications. Overall, respiratory tract infections remain one of the top ten leading causes of death in the US for every age group. Specific to the pediatric population, lower respiratory tract infections are the leading cause for hospitalization. This review highlights the current evidence behind e-cigarette exposure and its association with impaired innate immune function and the risk of lower respiratory tract infections. To date, various preclinical models have evaluated the direct effects of e-cigarette exposure on the innate immune system. More specifically, e-cigarette exposure impairs certain cell types of the innate immune system including the airway epithelium, lung macrophage and neutrophils. Identified effects of e-cigarette exposure common to the lung's innate immunity include abnormal mucus composition, reduced epithelial barrier function, impaired phagocytosis and elevated systemic markers of inflammation. These identified impairments in the lung's innate immunity have been shown to increase adhesion of certain bacteria and fungi as well as to increase virulence of common respiratory pathogens such as influenza virus, Staphylococcus aureus or Streptococcus pneumoniae. Information summarized in this review will provide guidance to healthcare providers, policy advocates and researchers for making informed decisions regarding the associated respiratory health risks of e-cigarette use in pediatric and young adults.

Recent updates on biomarkers of exposure and systemic toxicity in e-cigarette users and EVALI

Electronic nicotine delivery systems (ENDS), or e-cigarettes, are emerging tobacco products that produce aerosols by heating e-liquids, which most often consist of propylene glycol and vegetable glycerin along with various flavoring compounds, bypassing the combustion that occurs in the use of traditional tobacco cigarettes. These products have seen a drastic increase in popularity in recent years both as smoking cessation devices as well as among younger generations, due in large part to the widespread perception among consumers that e-cigs are significantly less harmful to health than traditional tobacco cigarettes. Due to the novelty of ENDS as well as their rapidly increasing use, research into biomarkers of e-cig exposure and toxicity have lagged behind their popularity, leaving important questions about their potential toxicity unanswered. Research into potential biomarkers of acute and chronic e-cig use, and e-cigarette- or vaping-associated lung injury is necessary for informing both clinical and regulatory decision-making. We aim to provide an updated review of recent research into potential circulating, genomic, transcriptomic, and epigenetic biomarkers of exposure to and toxicity of e-cigs. We additionally highlight research areas that warrant additional study to gain a better understanding of health risks associated with ENDS use, as well as to provide validation of existing data and methods for measuring and analyzing e-cig-associated biomarkers in human and animal biofluids, tissues, and cells. This review also highlights ongoing efforts within the WNY Center for Research on Flavored Tobacco for research into novel biomarkers in extracellular vesicles that may be associated with short- and long-term ENDS use.

Vaping cartridge heating element compositions and evidence of high temperatures

BACKGROUND

Identifying the functional materials inside vaping devices can help inform efforts to understand risk. While nicotine E-cigarette components and metals have been characterized in several previous studies, the internal component compositions of tetrahydrocannabinol (THC) cartridge designs are not as well known. The 2019-20 e-cigarette or vaping product use associated lung injury (EVALI) outbreak has been associated with THC devices containing vitamin E acetate (VEA), possibly mediated by chemical reactions with internal cartridge components and high filament temperatures.

METHODS

We investigate the composition and internal components of 2019 EVALI patient-associated THC vaping devices compared to other THC and nicotine devices from 2016-19, specifically the metal, ceramic, and polymer components likely to be exposed to heat. To do this, we have disassembled forty-eight components from eight used and unused vaping devices under a microscope and analyzed them using X-ray fluorescence, scanning electron microscopy, and Fourier-transform infrared micro-spectroscopy.

CONCLUSIONS

The two THC cartridges used by EVALI patients exhibited evidence of localized high temperatures, including charring of the ceramic heating elements and damaged wire surfaces. The newer THC cartridges possessed more ceramic and polymer insulation than older THC or nicotine devices. The combination of ceramics, metals, and high temperatures in newer THC cartridges is consistent with conditions hypothesized to produce VEA reactions during vaping. Nickel and chromium components were detected in all devices, and others contained copper, lead, tin, gold, silicon-rich rubbers, or fluorinated microplastics. These components have the potential to thermally degrade and volatilize if heated sufficiently. These findings do not imply that harmful exposures would occur under all usage conditions, and are most relevant to harm reduction efforts based on avoiding higher internal temperatures. This study was limited to a small sample of cartridges obtained from investigations. Future work should test more device types and internal temperatures under controlled usage conditions.