In Vitro Investigations of Human Bioaccessibility from Reference Materials Using Simulated Lung Fluids

The relationship between the inhalation bioaccessibility of potentially toxic elements in road dust from a heavily polluted industrial area and the source of their pollution

One of the sources of chronic exposure to potentially toxic elements (PTE), especially in polluted environments, is the inhalation of resuspended road dust (RD). The aim of this study is to assess the inhalation bioaccessibility of PTE in RD from highly polluted environments from mining/smelting industries and traffic, and to identify any correlations between the bioaccessibility fraction of PTE and the physicochemical characteristics of the particles. RD from the studied area contains extremely high total concentrations of Cr, V, and Mn, which are likely due to pollution from the smelting industry. Additionally, elevated total concentrations of other elements associated with traffic emissions including Zn, Cu, Pb, Sb, and Sn were also measured. The bioaccessibility of PTE was assessed using two synthetic extraction solutions - Gamble's solution (GS) and Artificial Lysosomal Fluid (ALF). The majority of elements showed negligible bioaccessibility in GS. However, quite high inhalation bioaccessibility was observed for Zn, Pb, Sb, Cd, and Mn in the ALF solution, with a mean bioaccessible fraction of 49, 51.5, 41, 50, and 40% respectively. The highest bioavailable fraction was measured for Cd (97%) in a sample collected near a steel production facility and for Pb (95%) in a sample collected near the highway. These results indicate that increased mobility of the elements in inhaled particles occurs only in the case of phagocytosis. The lowest inhalation bioavailability was measured for Cr (mean is 3%). Differential individual particle analysis revealed that about 60% of phases, mostly major (Cr,Ti,V)-bearing metallic alloys, silicates, oxides and sulphides, are stable in ALF solution, while 40% of phases, mostly (Fe,Ca,Mn)-bearing oxides, silicates, sulphides, metals and metallic alloys originating from steel production, ferrochrome, ferrosilicon and vanadium production and from traffic emissions have been heavily corroded or completely dissolved. The study provides valuable information to further assess health hazards from various emission sources.

Strong synergistic and antagonistic effects of quinones and metal ions in oxidative potential (OP) determination by ascorbic acid (AA) assays

A key challenge in oxidative potential (OP) assays is to accurately assess the cumulative impact of redox-active aerosol species rather than only their individual effects. This study investigates the OP of single and combined mixtures of 1,2-naphthoquinone (1,2-NQ), 1,4-naphthoquinone (1,4-NQ), 9,10-phenanthrenequinone (9,10-PQ), 1,4-benzoquinone (1,4-BQ), Cu, Fe, Mn, and Zn in standard ascorbic acid (OPAA) and the synthetic respiratory tract lining fluid (OPRTLF) assays. In both OPAA and OPRTLF, binary mixtures showed additive and synergistic effects in the presence of 1,2-NQ. The mixture of Cu and Zn showed substantial synergisms in both assays, while the mixtures in the absence of 1,2-NQ primarily induced antagonistic effects. For the first time, we propose linear equations to improve the prediction of OP values by considering the impacts of synergistic and antagonistic effects. Under this approach, we observed that the potential effects caused by binary mixtures in ambient particulate matter (PM) samples could account for up to 68 % of the PM-OP values in Fez, Morocco (OPmAA: 0.34 nmol min-1 µg-1 and OPmRTLF: 0.18 nmol min-1 µg-1). The present study improves the understanding of effects of chemical interaction of potentially toxic substances that are important in the understanding of PM-induced oxidative stress in the human body.

Quantification of trace heavy metals in environmental water, soil and atmospheric particulates with their bioaccessibility analysis

In this work, sulfhydryl (SH) functionalized magnetic covalent organic framework (COF) was synthesized by using 4-aldehyde phenyl butadiyne (DEBD) and 1,3,5-tris(4-aminophenyl) benzene (TAPB) as the monomers and ethanedithiol as the modifier, with the aid of thiol-alkyne "click" reaction. The prepared Fe3O4@COFTAPB-DEBD@SH exhibited relatively strong magnetism (32.8 emu g-1), good stability and selectivity to target analytes with a high sulfhydryl content (0.24 mmol g-1). Based on Fe3O4@COFTAPB-DEBD@SH, a method combining magnetic solid phase extraction with inductively coupled plasma mass spectrometry (ICP-MS) was developed for the quantitative analysis of trace metals. Under the optimal conditions, the method merited fast desorption kinetics (<2 min), adsorption kinetics (<20 min), fast phase separation (<1 min), high enrichment factor (100), and the detection limits for Cd, Hg, Pb and Bi were determined to be 1.18, 0.51, 4.91 and 0.39 ng L-1, respectively. A good resistance to complex matrices was demonstrated for the method in the analysis of soil, atmospheric particles and simulated pulmonary fluids samples. Certified reference materials (coal fly ash GBW08401 and soil GBW07427) were employed to validate the accuracy of the method. Four target metals in the range of 12.9-215 ng L-1, 0.06-24.6 μg g-1 and 0.52-33.1 ng m-3 were found in local water, soil and atmospheric particulates (PM), respectively. Additionally, artificial lysosome solution and gamble's solution were used to simulate human pulmonary fluid and the bioaccessibility of Cd, Hg, Pb and Bi in PM2.5 was evaluated to be 58.6-73.1 % and 1.3-7.1 %, respectively.

Experimental factors influencing the bioaccessibility and the oxidative potential of transition metals from welding fumes

Inhalation of welding fumes (WFs) containing high levels of transition metals (Cr, Cu, Fe, Mn, Ni…) is associated with numerous health effects including oxidative stress. However, the measurements of the oxidative potential (OP) and bioaccessibility of WF transition metals depend on several physicochemical parameters and may be subject to several experimental artifacts. In this work, we investigated the influence of the experimental conditions that may affect the bioaccessibility of transition metals and their OP on stainless-steel WF extracts. WFs were produced using a generation bench and sampled on filters. The soluble fraction of the metals was analysed. Two different extraction fluids mimicking physiological pulmonary conditions were studied: phosphate buffer and Hatch's solution. Three extraction times were tested to determine the optimal time for a significant OPDTT using the dithiothreitol (DTT) method. The storage conditions of WFs after filter sampling such as duration, temperature and atmospheric conditions were investigated. The results indicate that experimental conditions can significantly affect the OPDTT and metal bioaccessibility analyses. Cr, Cu and Ni show higher solubility in Hatch's solution than in the phosphate buffer. Mn is highly sensitive to DTT and shows close solubility in the two fluids. An extraction time of 0.5 h in phosphate buffer allows a better sensitivity to OPDTT, probably by limiting complexations, interactions between metals and precipitation. Storage time and temperature can influence the physical or chemical evolution of the WFs, which can affect their OPDTT and Mn solubility. However, storage under N2(g) limits these changes. On-line measurements of OPDTT could provide an alternative to filter sampling to overcome these artifacts.

Insights on hazardous metal bioaccessibility, and groundwater impacted by Zn residues from a legacy mine and risk evaluation of adjacent soils

This study explored the legacy impact of Zinc plant residues (ZPRs) in Kabwe, Zambia, on the environment and human health, particularly in light of the town's reputation for Pb pollution. ZPRs solid samples and groundwater within and around ZPRs zone were collected from the legacy mine, along with soils in a 10 km radius from the mine site. Bioaccessible fractions of Pb and Zn were elucidated by Japanese leaching test (JLT) and simple bioaccessibility extraction test (SBET). Cationic speciation of Pb and Zn from inhalable and ingestible ZPRs particles was investigated via sequential extraction. Groundwater in the ZPRs area showed higher Zn levels (1490 mg/L) compared to Pb (1.7 mg/L). Elevated Zn concentration were facilitated by the presence of soluble Zn sulfates while Pb was constrained due to its precipitation as anglesite. Groundwater sampled outside the ZPRs area was within the Zambia regulatory limits (< 0.5 mg/L for Pb and < 1 mg/L for Zn). Inhalation exposure to < 30 µm dust particles from ZPRs and soils near the mine indicated negligible risk, with < 3% of bioaccessible Pb in artificial lysosomal fluid. Meanwhile, oral intake of ZPRs particles < 250 µm revealed elevated bioaccessible fractions (36% for Pb and 70% for Zn). ZPRs cationic speciation of ingestible particles < 30 µm, 30-75 µm, 75-150 µm and 150-250 µm indicated that the bioaccessible Pb predominantly emanated from labile Pb fractions under gastric conditions with pH < 1. This was due to the dissolution of Pb associated with the exchangeable phase, carbonates and iron/manganese oxides; however, only exchangeable/carbonate Pb was bioaccessible at pH < 2. Hazard quotients indicated increased risks of Pb intoxication through the ingestion of ZPRs and soils near the legacy mine, with higher risks observed in children, emphasizing the need to remediate legacy mine wastes to reduce health risks and protect groundwater through monitoring in mining-affected regions.

Quantification of Bioaccessible and Environmentally Relevant Trace Metals in Structure Ash from a Wildland-Urban Interface Fire

Wildfires at the wildland-urban interface (WUI) are increasing in frequency and intensity, driven by climate change and anthropogenic ignitions. Few studies have characterized the variability in the metal content in ash generated from burned structures in order to determine the potential risk to human and environmental health. Using inductively coupled plasma optical emission spectroscopy (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS), we analyzed leachable trace metal concentration in soils and ash from structures burned by the Marshall Fire, a WUI fire that destroyed over 1000 structures in Boulder County, Colorado. Acid digestion revealed that ash derived from structures contained 22 times more Cu and 3 times more Pb on average than surrounding soils on a mg/kg basis. Ash liberated 12 times more Ni (mg/kg) and twice as much Cr (mg/kg) as soils in a water leach. By comparing the amount of acid-extractable metals to that released by water and simulated epithelial lung fluid (SELF), we estimated their potential for environmental mobility and human bioaccessibility. The SELF leach showed that Cu and Ni were more bioaccessible (mg of leachable metal/mg of acid-extractable metal) in ash than in soils. These results suggest that structure ash is an important source of trace metals that can negatively impact the health of both humans and the environment.

In vitro inhalation bioaccessibility and health risk assessment of difenoconazole in the atmosphere

BACKGROUND

Assessment of the risk of pesticide inhalation in populations around farmland is necessary because inhalation is one of the ways in which pesticides can risk human health. This study aimed to identify the inhalation risk of difenoconazole on humans by using dose-response and exposure assessments.

RESULTS

In the field simulation application, respiratory exposure in populations around farmland ranged from 71 to 430 ng/m3 . Using response surface methodology, the maximum bioaccessibility of difenoconazole in three simulated lung fluids was 35.33% in Gamble's solution (GS), 34.12% in artificial lysosomal fluid (ALF), and 42.06% in simulated interstitial lung fluid (SLF). Taking the proliferation activity of the A549 cell model as the endpoint, the benchmark dose limit and benchmark dose of difenoconazole on A549 cells were 16.36 and 5.60 mg/kg, respectively. The margin of exposure to difenoconazole in GS, ALF and SLF were, respectively, 8.66 × 105 to 5.28 × 106 , 8.97 × 105 to 5.47 × 106 and 7.28 × 105 to 4.44 × 106 .

CONCLUSION

The risk assessment results indicate that under all circumstances, applying difenoconazole is safe for populations around farmland. However, a fan-shaped nozzle, suspension concentrate and greater inhalation height increase the risk of inhalation. © 2023 Society of Chemical Industry.

Integrating multiple spheres to identify the provenance and risk of urban dust and potentially toxic elements: Case study from central Mexico

This study aims to improve the current method of studying potentially toxic elements (PTEs) in urban dust using direct chemical evidence (from dust, rock, and emission source samples) and robust geochemical methods. The provenance of urban dust was determined using rare earth elements (REEs) and geochemical diagrams (V-Ni-Th*10, TiO2 vs. Zr, and Zr/Ti vs. Nb/Y). The geogenic or anthropogenic source of PTEs was determined using the enrichment factor (EF) and compositional data analysis (CoDA), while a PTE's point emission source was identified using a 3.1*La-1.54*Ce-Zn diagram, mineralogy, and morphology analyses. The spatiotemporal distribution of PTEs was determined using a geographic information system, and their health risk (by inhalation) was estimated using a lung bioaccessibility test and particle size distribution. We collected urban dust (n = 38), rock (n = 4), and zinc concentrate (n = 2) samples and determined PTEs and REEs in a city of 1.25 million inhabitants in central Mexico. Results showed that urban dust derived from the San Miguelito Range. REEs, Sc, and Zr were geogenic, while Mn, Cu, Zn, As, and Pb were anthropogenic. Due to the presente of sphalerite particles, a zinc refinery was identified as the point emission source of Zn, As, and Pb. High concentrations of Zn (5000-20,008 mg/kg), As (120-284 mg/kg), and Pb (350-776 mg/kg) were found in urban dust near the zinc refinery. Additionally, particles of PM2.5 (66-84%), PM5.0 (13-27%), PM10 (3-8%), and PM20 (0-2%) and lung bioaccessibility of Sr (48.5-72.4%), Zn (9.6-28.4%), Cu (10.5-27.0%), Fe (4.5-8.6%), Mn (2.9-9.2%), Cr (38.3%) and Pb (30.6%) demonstrated a latent risk to human health. These approaches improve our understanding of the provenance of urban dust and its PTE emission sources in urban areas.

Timing of Phagosome Maturation Depends on Their Transport Switching from Actin to Microtubule Tracks

Phagosomes, specialized membrane compartments responsible for digesting internalized pathogens, undergo sequential dynamic and biochemical changes as they mature from nascent phagosomes to degradative phagolysosomes. Maturation of phagosomes depends on their transport along actin filaments and microtubules. However, the specific quantitative relationship between the biochemical transformation and transport dynamics remains poorly characterized. The autonomous nature of phagosomes, moving and maturing at different rates, makes understanding this relationship challenging. Addressing this challenge, in this study we engineered particle sensors to image and quantify single phagosomes' maturation. We found that as phagosomes move from the actin cortex to microtubule tracks, the timing of their actin-to-microtubule transition governs the duration of the early phagosome stage before acquiring degradative capacities. Prolonged entrapment of phagosomes in the actin cortex extends the early phagosome stage by delaying the dissociation of early endosome markers and phagosome acidification. Conversely, a shortened transition from actin- to microtubule-based movements causes the opposite effect on phagosome maturation. These results suggest that the actin- and microtubule-based transport of phagosomes functions like a "clock" to coordinate the timing of biochemical events during phagosome maturation, which is crucial for effective pathogen degradation.

Docetaxel liposomes for lung targeted delivery: development and evaluation

Docetaxel (DTX) is an artificial semi-synthetic second-generation taxane anti-tumor drug, which is suitable for the treatment of various cancers such as lung cancer. The route of administration of DTX formulations has been extended to oral, intravenous, and rectal, with few studies on pulmonary administration being reported. Here, we had developed DTX liposomes (DTX-lips) for pulmonary inhalation administration. The particle size of the preparation was 125 nm, the encapsulation efficiency was 94.4 ± 0.14%, and the drug loading capacity was 1.26 ± 0.01%. It had good stability. The fine particle fraction with aerodynamic diameter less than 6.4 μm accounts for 64.63 ± 0.12%, showed excellent aerosolization performance. DTX-lips were slow to release in simulated lung fluid. The fluorescence distribution experimented in mice and tissues showed that the fluorescence of the inhaled liposome group was mainly distributed in the lung, and the retention time was significantly prolonged as compared with those of the other two groups. No significant fluorescence was observed in other tissues, which was conducive to the full effect of the drug in the lung tissue. DTX-lips had no damage to respiratory system and whole body. These results indicated that the inhaled DTX-lips had good lung targeting, reduced accumulation in other organs, and improved the safety and effectiveness of the drug.

Preparation and evaluation of sustained release pirfenidone-loaded microsphere dry powder inhalation for treatment of idiopathic pulmonary fibrosis

Pirfenidone (PFND) is a recommended oral drug used to treat idiopathic pulmonary fibrosis, but have low bioavailability and high hepatotoxicity. The study, therefore, seeks to improve the therapeutic activities of the drug via increased bioavailability and reduced associated side effects by developing a novel drug delivery system. The electrostatic spray technology was used to prepare a sustained release pirfenidone-loaded microsphere dry powder inhalation with PEG-modified chitosan (PFND-mPEG-CS-MS). The entrapment efficiency, drug loading, and in vitro cumulative drug release rate (at 24 h and with a sustained release effect) of PFND-mPEG-CS-MS were 77.35±3.01%, 11.45±0.64%, and 90.4%, respectively. The Carr's index of PFND-mPEG-CS-MS powder was 17.074±2.163% with a theoretical mass median aerodynamic diameter (MMADt) of 0.99±0.07 μm, and a moisture absorption weight gain rate (Rw) of 4.61±0.72%. The emptying rate, pulmonary deposition rate (fine particle fraction) and actual mass median aerodynamic diameter (MMADa) were 90%∼95%, 48.72±7.04% and 3.10±0.16 μm, respectively. MTT bioassay showed that mPEG-CS-MS (200 μg/mL) had good biocompatibility (RGR = 90.25%) and PFND-mPEG-CS-MS (200 μg/mL) had significant inhibitory activity (RGR = 49.82%) on fibroblast growth. The pharmacokinetic data revealed that the t1/2 (5.02 h) and MRT (10.66 h) of PFND-mPEG-CS-MS were prolonged compared with the free PFND (t1/2, 1.67 h; MRT, 2.71 h). The pharmacodynamic results also showed that the formulated-drug group had slight pathological changes, lower lung hydroxyproline content, and reduced hepatotoxicity compared with the free-drug group. The PFND-mPEG-CS-MS further significantly down-regulated TGF-β cytokines, Collagen I, and α-SMA protein expression levels compared with the free drug. The findings indicated that the PFND-mPEG-CS-MS had a good sustained release effect, enhanced bioavailability, decreased toxicity, and increased anti-fibrotic activities.

Oral and inhalation bioaccessibility of mercury in contaminated soils and potential health risk to the kidneys and neurodevelopment of children in Taiwan

Health risk assessments of exposure to mercury (Hg) from soils via ingestion and inhalation are indispensable for Taiwanese people living in the vicinity of Hg-contaminated sites. In this study, anthropogenic soils were collected from various polluted sources in Taiwan. In vitro oral and inhalation bioaccessible fractions of Hg were analyzed to avoid from overestimating the exposure risk. Discrepancies in oral and inhalation bioaccessible levels of Hg in soils were found using different in vitro assays with different pH levels and chemical compositions. The freshly contaminated soil (soil S7) polluted by chlor-alkali production activity sampled before the site was remediated had the highest total Hg concentration of 1346 mg/kg, with the highest oral bioaccessibility of 26.2% as analyzed by SW-846 Method 1340 and inhalation bioaccessibility of 30.5% as analyzed by modified Gamble's solution. The lesser extent of aging of Hg in soil S7 increased the Hg availability for humans, which was also found based on results of a sequential extraction procedure. Results of the hazard quotient showed that soil ingestion was the main pathway causing non-carcinogenic risks for children and adults. Children were also exposed to higher risks than were adults due to higher frequencies of hand-to-mouth behaviors and lower body weights. Furthermore, hazard index results adjusted for oral and inhalation bioaccessible Hg were lower than those obtained based on the total Hg content; however, an unacceptable value of the non-carcinogenic risk (> 1) for children living near soil S7 was still observed. This study suggests that children living near sites polluted for a short period of time may suffer potential renal effects regardless of the bioaccessibility. Our findings provide suggestions for decision makers on setting new strategies for managing risks of Hg-contaminated soils in Taiwan.

Agglomeration Behavior and Fate of Food-Grade Titanium Dioxide in Human Gastrointestinal Digestion and in the Lysosomal Environment

In the present study, we addressed the knowledge gaps regarding the agglomeration behavior and fate of food-grade titanium dioxide (E 171) in human gastrointestinal digestion (GID). After thorough multi-technique physicochemical characterization including TEM, single-particle ICP-MS (spICP-MS), CLS, VSSA determination and ELS, the GI fate of E 171 was studied by applying the in vitro GID approach established for the regulatory risk assessment of nanomaterials in Europe, using a standardized international protocol. GI fate was investigated in fasted conditions, relevant to E 171 use in food supplements and medicines, and in fed conditions, with both a model food and E 171-containing food samples. TiO₂ constituent particles were resistant to GI dissolution, and thus, their stability in lysosomal fluid was investigated. The biopersistence of the material in lysosomal fluid highlighted its potential for bioaccumulation. For characterizing the agglomeration degree in the small intestinal phase, spICP-MS represented an ideal analytical tool to overcome the limitations of earlier studies. We demonstrated that, after simulated GID, in the small intestine, E 171 (at concentrations reflecting human exposure) is present with a dispersion degree similar to that obtained when dispersing the material in water by means of high-energy sonication (i.e., ≥70% of particles <250 nm).

Oxidative stress indices induced by industrial and urban PM2.5-bound metals in A549 cells

The detrimental effects of atmospheric fine particulate matter (PM_2.5) on human health are of major global concern. PM_2.5-bound metals are toxic compounds that contribute to cellular damage. To investigate the toxic effects of water-soluble metals on human lung epithelial cells and their bioaccessibility to lung fluid, PM_2.5 samples were collected from both urban and industrial areas in the metropolitan city of Tabriz, Iran. Oxidative stress indices, including proline content, total antioxidant capacity (TAC), cytotoxicity, and DNA damage levels of water-soluble components of PM_2.5, were evaluated. Furthermore, an in vitro test was conducted to assess the bioaccessibility of various PM_2.5-bound metals to the respiratory system using simulated lung fluid. PM_2.5 average concentrations in urban and industrial areas were 83.11 and 97.71 μg/m³, respectively. The cytotoxicity effects of PM_2.5 water-soluble constituents from urban areas were significantly higher than in industrial areas and the IC₅₀ was found to be 96.76 ± 3.34 and 201.31 ± 5.96 μg/mL for urban and industrial PM_2.5 samples, respectively. In addition, higher PM_2.5 concentrations increased the proline content in a concentration-dependent manner in A549 cells, which plays a protective role against oxidative stress and prevents PM_2.5-induced DNA damage. Also, the partial least squares regression revealed that Be, Cd, Co, Ni, and Cr, were significantly correlated with DNA damage and proline accumulation, which caused cell damage through oxidative stress. The results of this study showed that PM_2.5-bound metals in highly polluted metropolitan city caused substantial changes in the cellular proline content, DNA damage levels and cytotoxicity in human lung A549 cells.

Enhanced Gastric/Lung Arsenic Bioaccessibility from Lignite Fly Ashes: Comparing Bioaccessibility Rates with Multiple Environmental Matrices

Inorganic arsenic (As), a carcinogenic element to humans, is among the most dangerous and flammable substances that coal-burning plants could release. When coal is burned, large portions of arsenic are captured on fly-ash (FA) particles, but it could also contribute significantly to stack emissions of fine fly-ash particles. The aim of this study was to evaluate the oral and respiratory bioaccessibility of arsenic in lignite fly-ash (LFA) samples, and their contribution to total As exposure. Arsenic bioaccessibility fractions via ingestion and inhalation showed significant differences, suggesting the presence of highly soluble As-bearing phases in the studied LFA samples. The bioaccessible As fractions (BAF%) in the simulated gastric fluids (UBM protocol, ISO 17924:2018) showed a range of 45-73%, while the pulmonary bioaccessibility rates in the simulated lung fluid (artificial lung fluid (ALF)) exhibited significantly enhanced levels ranging from 86% to 95%. The obtained arsenic bioaccessibility rates were compared with previous data for multiple environmental matrices such as soil and dust-related materials, revealing that LFA exhibited significantly higher bioaccessibility (%) for the inhalation pathway.

Size-Controlled Preparation of Docetaxel- and Curcumin-Loaded Nanoemulsions for Potential Pulmonary Delivery

Lung cancer is one of the deadliest pulmonary diseases in the world. Although docetaxel (DTX) has exhibited superior efficacy in lung cancer treatment, it has demonstrated numerous adverse effects and poor bioavailability. The natural product extract, curcumin (CCM), has reportedly reduced toxicity and synergistically improved DTX bioavailability. Nonetheless, the hydrophobic nature of DTX and CCM limits their clinical use. Nanoemulsion pulmonary delivery of DTX and CCM has demonstrated potential as a drug carrier to alleviate these drawbacks. The controlled preparation of inhalable DTX- and CCM-loaded nanoemulsions within the 100 to 200 nm range was explored in this study. A response surface methodology (RSM) based on a central composite design (CCD) was utilized to fabricate the desired size of the nanoemulsion under optimized conditions. Different process parameters were employed to control the size of the nanoemulsions procured through a high-energy emulsification technique. The size of the resultant nanoemulsions decreased with increasing energy input. The actual response according to the targeted sizes for DTX- and CCM-loaded nanoemulsion models exhibited excellent agreement with the predicted value at below 5% residual standard error under optimized conditions. The nanoemulsion of 100 nm particle size demonstrated better membrane permeability than their larger counterparts. Moreover, the formulations documented favorable physicochemical and aerodynamic pulmonary delivery properties and reduced toxicity in human lung fibroblast (MRC-5) cells. Hence, this tunable size of nanoemulsions could be a suitable alternative drug delivery for pulmonary diseases with increased local lung concentration.

In-vitro inhalation bioavailability estimation of Metal(oid)s in atmospheric particulate matter (PM2.5) using simulated alveolar lysosomal fluid: A dialyzability approach

A novel in-vitro method, by using synthetic body fluids, human physiological conditions and a simulated air-blood barrier (by using a dialysis membrane) has been developed and applied to assess in-vitro inhalation bioavailability of metal(oid)s associated to particulate matter (PM_2,5) samples collected from an industrial site of the Northwest of Spain. A validated analytical methodology based on inductively coupled plasma mass spectrometry (ICP-MS) was used to analyse metal(oid)s concentrations in bioavailable fractions. This approach would be a more realistic human health risk assessment since considering processes that occur in human body in contrast the overestimation derived from current models (which consider environmental concentrations). Metal(oid)s such as Cu and Mo seemed to be the most bioavailable (mean in-vitro bioavailability ratios higher than 70%); Ba, Cd, Mn, Pb, Rb, Sb, Sn, V and Zn shown mean ratios between 20 and 60%, while low in-vitro bioavailability ratios (less than 20%) were observed for metal(oid)s such as Al, Co, Cr, Fe, Ni, Ti, and Tl. Health risk assessment via inhalation based on hazard carcinogenic and non-carcinogenic indexes (HI_c and HI_nc, respectively) were performed considering three exposure scenarios using both inhalation bioavailable and total metal(oid)s concentrations in PM_2.5 samples, suggesting no risk to human health. The influence of chemical composition on in-vitro bioavailability ratios was obtained, pointing out that inhalation ratios of Al, Ba, Cr, Cu, Fe, Ni, Pb and V seem to be affected by sea salt and/or crustal and/or biogenic and/or anthropogenic content of PM_2.5.

Sub-cellular sequestration of alkaline drugs in lysosomes: new insights for pharmaceutical development of lysosomal fluid

Background and purpose

Lysosomal-targeted drug delivery can open a new strategy for drug therapy. However, there is currently no universally accepted simulated or artificial lysosomal fluid utilized in the pharmaceutical industry or recognized by the United States Pharmacopeia (USP).

Experimental procedure

We prepared a simulated lysosomal fluid (SLYF) and compared its composition to a commercial artificial counterpart. The developed fluid was used to test the dissolution of a commercial product (Robitussin^®) of a lysosomotropic drug (dextromethorphan) and to investigate in-vitro lysosomal trapping of two model drugs (dextromethorphan and (+/-) chloroquine).

Findings/Results

The laboratory-prepared fluid or SLYF contained the essential components for the lysosomal function in concentrations reflective of the physiological values, unlike the commercial product. Robitussin^® passed the acceptance criteria for the dissolution of dextromethorphan in 0.1 N HCl medium (97.7% in less than 45 min) but not in the SLYF or the phosphate buffer media (72.6% and 32.2% within 45 min, respectively). Racemic chloroquine showed higher lysosomal trapping (51.9%) in the in-vitro model than dextromethorphan (28.3%) in a behavior supporting in-vivo findings and based on the molecular descriptors and the lysosomal sequestration potential of both.

Conclusion and implication

A standardized lysosomal fluid was reported and developed for in-vitro investigations of lysosomotropic drugs and formulations.

Dissolution Behaviour of Metal-Oxide Nanomaterials in Various Biological Media

Toxicological effects of metal-oxide-engineered nanomaterials (ENMs) are closely related to their distinct physical-chemical properties, especially solubility and surface reactivity. The present study used five metal-oxide ENMs (ZnO, MnO₂, CeO₂, Al₂O₃, and Fe₂O₃) to investigate how various biologically relevant media influenced dissolution behaviour. In both water and cell culture medium (DMEM), the metal-oxide ENMs were more soluble than their bulk analogues, with the exception that bulk-MnO₂ was slightly more soluble in water than nano-MnO₂ and Fe₂O₃ displayed negligible solubility across all tested media (regardless of particle size). Lowering the initial concentration (10 mg/L vs. 100 mg/L) significantly increased the relative solubility (% of total concentration) of nano-ZnO and nano-MnO₂ in both water and DMEM. Nano-Al₂O₃ and nano-CeO₂ were impacted differently by the two media (significantly higher % solubility at 10 mg/L in DMEM vs. water). Further evaluation of simulated interstitial lung fluid (Gamble's solution) and phagolysosomal simulant fluid (PSF) showed that the selection of aqueous media significantly affected agglomeration and dissolution behaviour. The solubility of all investigated ENMs was significantly higher in DMEM (pH = 7.4) compared to Gamble's (pH 7.4), attributable to the presence of amino acids and proteins in DMEM. All ENMs showed low solubility in Gamble's (pH = 7.4) compared with PSF (pH = 4.5), attributable to the difference in pH. These observations are relevant to nanotoxicology as increased nanomaterial solubility also affects toxicity. The results demonstrated that, for the purpose of grouping and read-across efforts, the dissolution behaviour of metal-oxide ENMs should be evaluated using aqueous media representative of the exposure pathway being considered.

Methods for Elemental Analysis of Size-Resolved PM Samples Collected on Aluminium Foils: Results of an Intercomparison Exercise

Aluminium is the most common substrate in studies using impactors for the measurement of the number or the weight of size-segregated atmospheric particulate matter (PM), as its characteristics perfectly fit impactor requirements. However, its use is not recommended by manufacturers when one of the purposes of the study is the determination of the metal content in the sample. The aim of this work was to develop an efficient analytical procedure for the removal and acid digestion of PM samples collected on aluminium foils by a cascade impactor to perform the determination of metals. The possibility of performing the trace metal analysis of PM samples collected using aluminium foils is of great importance, as it allows the determination of an accurate size distribution and the elemental composition of the PM collected on each impactor stage. Two procedures were optimised by using different digestion and analysis techniques. Both procedures were then applied to the two halves of several Dekati low-pressure impactor (DLPI) samples, and the results were critically compared. The two procedures proved to be effective in the determination of extremely low concentrations of a large suite of analytes in different size fractions of PM emitted by a brake system.

Kinetics of phagosome maturation is coupled to their intracellular motility

Immune cells degrade internalized pathogens in phagosomes through sequential biochemical changes. The degradation must be fast enough for effective infection control. The presumption is that each phagosome degrades cargos autonomously with a distinct but stochastic kinetic rate. However, here we show that the degradation kinetics of individual phagosomes is not stochastic but coupled to their intracellular motility. By engineering RotSensors that are optically anisotropic, magnetic responsive, and fluorogenic in response to degradation activities in phagosomes, we monitored cargo degradation kinetics in single phagosomes simultaneously with their translational and rotational dynamics. We show that phagosomes that move faster centripetally are more likely to encounter and fuse with lysosomes, thereby acidifying faster and degrading cargos more efficiently. The degradation rates increase nearly linearly with the translational and rotational velocities of phagosomes. Our results indicate that the centripetal motion of phagosomes functions as a clock for controlling the progression of cargo degradation.

Spatial Distribution, Contamination Levels, and Health Risk Assessment of Potentially Toxic Elements in Household Dust in Cairo City, Egypt

Urban areas’ pollution, which is owing to rapid urbanization and industrialization, is one of the most critical issues in densely populated cities such as Cairo. The concentrations and the spatial distribution of fourteen potentially toxic elements (PTEs) in household dust were investigated in Cairo City, Egypt. PTE exposure and human health risk were assessed using the USEPA’s exposure model and guidelines. The levels of As, Cd, Cr, Cu, Hg, Mo, Ni, Pb, and Zn surpassed the background values. Contamination factor index revealed that contamination levels are in the sequence Cd > Hg > Zn > Pb > Cu > As > Mo > Ni > Cr > Co > V > Mn > Fe > Al. The degree of contamination ranges from considerably to very high pollution. Elevated PTE concentrations in Cairo’s household dust may be due to heavy traffic emissions and industrial activities. The calculated noncarcinogenic risk for adults falls within the safe limit, while those for children exceed that limit in some sites. Cairo residents are at cancer risk owing to prolonged exposure to the indoor dust in their homes. A quick and targeted plan must be implemented to mitigate these risks.

Characterization and Toxicity Analysis of Lab-Created Respirable Coal Mine Dust from the Appalachians and Rocky Mountains Regions

Coal mine workers are continuously exposed to respirable coal mine dust (RCMD) in workplaces, causing severe lung diseases. RCMD characteristics and their relations with dust toxicity need further research to understand the adverse exposure effects to RCMD. The geographic clustering of coal workers’ pneumoconiosis (CWP) suggests that RCMD in the Appalachian region may exhibit more toxicity than other geographic regions such as the Rocky Mountains. This study investigates the RCMD characteristics and toxicity based on geographic location. Dissolution experiments in simulated lung fluids (SLFs) and in vitro responses were conducted to determine the toxicity level of samples collected from five mines in the Rocky Mountains and Appalachian regions. Dust characteristics were investigated using Fourier-transform infrared spectroscopy, scanning electron microscopy, the BET method, total microwave digestion, X-ray diffraction, and X-ray photoelectron spectroscopy. Inductively coupled plasma mass spectrometry was conducted to determine the concentration of metals dissolved in the SLFs. Finer particle sizes and higher mineral and elemental contents were found in samples from the Appalachian regions. Si, Al, Fe, Cu, Sr, and Pb were found in dissolution experiments, but no trends were found indicating higher dissolutions in the Appalachian region. In vitro studies indicated a proinflammatory response in epithelial and macrophage cells, suggesting their possible participation in pneumoconiosis and lung diseases development.

Transformation of zinc oxide nanoparticles in synthetic lung fluids

Surface coatings, including paints, stains, and sealants, have recently become a focus of "nano-enabled" consumer product engineering. Specifically, zinc oxide (ZnO) nanoparticles (NPs) have been introduced to surface coatings to increase UV resistance. As more "nano-enabled" products are made available for purchase, questions arise regarding their long-term environmental and human health effects. This study tracked the transformation of NP additives commonly added to consumer paints and stains using ZnO NPs as a model system. During product application and use, there is a risk of inhalation of aerosolized ZnO NPs. To investigate the potential chemical interactions and transformations that would occur after inhalation, ZnO NPs were incubated in two synthetic lung fluids (SLFs). Initial studies utilized ZnO NPs dispersed in Milli-Q water (control), or a commercially available deck stain. Additionally, two commercially available products advertising the inclusion of ZnO NP additives were evaluated. Subsamples were taken throughout incubation and analyzed via atomic absorption spectroscopy to determine both the total (including particulate) zinc concentration and dissolved (non-particulate) zinc concentration. Results indicate that the vast majority of ZnO transformation takes place within the first 24 h of incubation and is primarily driven by SLF pH and composition complexity. Significant dissolution of ZnO NPs was observed when incubated in Gamble's solution (between 25 and 68% depending on the matrix. Additionally, all ZnO solutions saw near immediate dissolution (~ 98-100%) within 3 h of incubation in artificial lysosomal fluid. Results illustrate potential for NPs in consumer products to undergo significant transformation during use and exposure over short time periods.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s11051-022-05527-y.

Health risk of fluorine in soil from a phosphorus industrial area based on the in-vitro oral, inhalation, and dermal bioaccessibility

Health risk of F in soil is of special concern due to the continuously elevated concentration of F in soil. However, there is still a dearth of risk assessments of F in soil based on in-vitro bioaccessibility posed by multiple exposure routes. Herein, the oral, inhalation, and dermal bioaccessibility of F in soil was firstly obtained by adapting and combining in-vitro methods, which then was introduced to remedy an information gap of a comprehensive risk of F in soil posed by a multi-exposure pathway. Combined in-vitro tests indicate the oral, inhalation, and dermal bioaccessibility of F was 13.15 ± 2.63%, 16.55 ± 2.63%, and 1.27 ± 0.73%, respectively. Plasma yielded a detoxic potential for the absorbed F after digesting in small intestine, while effects of enzymes, sweat, and food on the oral bioaccessibility of F were insignificant. Different with metals, the major dissolving phase of F was the interstitial fluid in the deep lung instead of in the alveolar macrophages intracellular environment. A potentially major release of F in the exocrine sweat was noted than in the apocrine sweat. Risk assessments based on the daily exposure incorporated with the in-vitro bioaccessibility suggested that compared with inhalation and dermal contact, oral ingestion was the main exposure route of F in soil to human. Present findings provide insights into the bioaccessibility and health risk of F in soil by multiple exposure routes, which are crucial for the risk control of F contamination in soil.

Availability, Toxicology and Medical Significance of Antimony

Antimony has been known and used since ancient times, but its applications have increased significantly during the last two centuries. Aside from its few medical applications, it also has industrial applications, acting as a flame retardant and a catalyst. Geologically, native antimony is rare, and it is mostly found in sulfide ores. The main ore minerals of antimony are antimonite and jamesonite. The extensive mining and use of antimony have led to its introduction into the biosphere, where it can be hazardous, depending on its bioavailability and absorption. Detailed studies exist both from active and abandoned mining sites, and from urban settings, which document the environmental impact of antimony pollution and its impact on human physiology. Despite its evident and pronounced toxicity, it has also been used in some drugs, initially tartar emetics and subsequently antimonials. The latter are used to treat tropical diseases and their therapeutic potential for leishmaniasis means that they will not be soon phased out, despite the fact the antimonial resistance is beginning to be documented. The mechanisms by which antimony is introduced into human cells and subsequently excreted are still the subject of research; their elucidation will enable us to better understand antimony toxicity and, hopefully, to improve the nature and delivery method of antimonial drugs.

Rare-earth metal oxide nanoparticles decouple the linkage between soil bacterial community structure and function by selectively influencing potential keystone taxa

Excessive production and application of rare-earth metal oxide nanoparticles warrants assessment of their environmental risks. Little is known about the impact of these nanoparticles on soil bacterial communities. We quantified the effects of nano-Gd₂O₃ and nano-La₂O₃, at the different concentrations and exposure regimes, on soil bacterial community structure and function as well as the structure-function relationship. Further, we constructed and analyzed a co-occurrence network to identify and characterize potential keystone taxa that were related to the enzyme activities and responded to the increasing concentrations of nanoparticles. Both nano-Gd₂O₃ and nano-La₂O₃ significantly altered the bacterial community structure and function in a concentration-dependent manner; however, these negative effects were observed on day 1 or day 7 but not on day 60, indicating that these effects were transient and the bacterial communities can mitigate the effect of these nanoparticles over time. Interestingly, the nanoparticle exposure decoupled the relationship between the structure and function of the soil bacterial communities. The decoupling was due to changes in the composition and relative abundances of potential keystone taxa related to bacterial community functions. Altogether, we provide insights into the interactions between the rare-earth metal oxide nanoparticles and soil bacterial communities. Our results facilitate the environmental risk assessment and safe usage of rare-earth metal oxide nanoparticles.

Single-phagosome imaging reveals that homotypic fusion impairs phagosome degradative function

Immune cells degrade internalized pathogens in vesicle compartments called phagosomes. Many intracellular bacteria induce homotypic phagosome fusion to survive in host cells, but the fusion interaction between phagosomes and its consequence for phagosome function have scarcely been studied. Here, we characterize homotypic fusion between phagosomes in macrophages and identify how such interactions impact the degradative capacity of phagosomes. By developing a series of particle sensors for measuring biochemical changes of single phagosomes, we show that phagosomes undergo stable fusion, transient "kiss-and-run" fusion, or both in succession. Super-resolution three-dimensional fluorescence microscopy revealed that stably fused phagosomes are connected by membrane "necks" with submicron-sized fusion pores. Furthermore, we demonstrate that, after stable fusion, phagosomes have leaky membranes and thereby impaired degradative functions. Our findings, based on phagosomes that contain synthetic particles, illustrate that homotypic fusion is not exclusive to phagosomes that encapsulate pathogens, as previously believed. The physical process of homotypic fusion is alone sufficient to perturb the degradative functions of phagosomes.

A tiered approach to investigate the inhalation toxicity of cobalt substances. Tier 1: Bioaccessibility testing

Bioelution tests measure in vitro the release of metal ion in surrogate physiological conditions (termed "bioaccessibility") and estimate the potential bioavailability relative to that of a known reference metal substance. Bioaccessibility of cobalt ion from twelve cobalt substances was tested in three artificial lung fluids (interstitial, alveolar and lysosomal) to gather information about the substances' fate and potential bioavailability in the respiratory tract after inhalation. The results can be used as one line of evidence to support grouping and read-across for substances lacking in vivo data, and where in vivo testing is not readily justifiable. Strong differences were observed in the dissolution behaviour of the substances in the different fluids, with the cobalt substances generally being less soluble in neutral pH fluids and more soluble in the acidic pH fluid. The resulting database, presented with its strengths and limitations, was used to support the formulation of an initial grouping of these cobalt substances into three categories.

Acute cytotoxicity of mineral fibres observed by time-lapse video microscopy

Inhalation of mineral fibres is associated with the onset of an inflammatory activity in the lungs and the pleura responsible for the development of fatal malignancies. It is known that cell damage is a necessary step for triggering the inflammatory response. However, the mechanisms by which mineral fibres exert cytotoxic activity are not fully understood. In this work, the kinetics of the early cytotoxicity mechanisms of three mineral fibres (i.e., chrysotile, crocidolite and fibrous erionite) classified as carcinogenic by the International Agency for Research on Cancer, was determined for the first time in a comparative manner using time-lapse video microscopy coupled with in vitro assays. All tests were performed using the THP-1 cell line, differentiated into M0 macrophages (M0-THP-1) and exposed for short times (8 h) to 25 μg/mL aliquots of chrysotile, crocidolite and fibrous erionite. The toxic action of fibrous erionite on M0-THP-1 cells is manifested since the early steps (2 h) of the experiment while the cytotoxicity of crocidolite and chrysotile gradually increases during the time span of the experiment. Chrysotile and crocidolite prompt cell death mainly via apoptosis, while erionite exposure is also probably associated to a necrotic-like effect. The potential mechanisms underlying these different toxicity behaviours are discussed in the light of the different morphological, and chemical-physical properties of the three fibres.

Comparison of oxidative potential of PM1 and PM2.5 urban aerosol and bioaccessibility of associated elements in three simulated lung fluids

PM1 and PM2.5 aerosol samples collected during four seasons were analysed for bioaccessibility of 21 elements and oxidative potential (OP) determined by the dithiothreitol (DTT) assay in three simulated lung fluids (SLFs): deionised water, simulated alveoli fluid and Gamble's solution. Most elements had higher bioaccessibility in the submicron fraction than in the fine size fraction. The bioaccessibility of the element not only depends on the aerosol size fraction, but also varies between the three SLFs. In addition, the bioaccessibility of elements depends on both their chemical compound and the composition of the SLF. A very high bioaccessibility (up to 98%) was observed for As, Sb and Cd in all studied SLFs. The lowest bioaccessibility was observed for Ti, Al and Fe. The OP of urban particulate matter (PM), was studied as a relevant metric for health effects. The difference of OP value in simulated alveoli fluid and Gamble's solution compared to deionised water indicate the crucial effect of individual SLFs' composition on the OP. The complexation of elements with different ligands present in the solution can influence OP_DTT depletion and, therefore, the potential health effects of inhaled aerosol. The correlation coefficients between total or bioaccessible concentrations of studied elements and volume normalised OP were calculated to examine the relationship between the elements and the OP. The strong positive correlations between some elements (i.e. Cd, Pb, As, Zn, Sn, Cu, Co, Ni, Mn) and DTT activity suggest their participation in the oxidative activity of PM.

Safety of iron hydroxide adipate tartrate as a novel food pursuant to Regulation (EU) 2015/2283 and as a source of iron in the context of Directive 2002/46/EC

Following a request from the European Commission, the EFSA Panel on Nutrition, Novel Foods and Food Allergens (NDA) was asked to deliver an opinion on iron hydroxide adipate tartrate as a novel food (NF) pursuant to Regulation (EU) 2015/2283 and as a source of iron in the context of Directive 2002/46/EC. The NF is intended to be used in food supplements up to a maximum dose of 100 mg per day, corresponding to a maximum daily intake of iron of 36 mg. The target population proposed by the applicant is the general population above 3 years of age. The NF which is the subject of the application is an engineered nanomaterial having primary particles, of almost spherical morphology, with a diameter typically smaller than 5 nm. The studies provided for absorption, distribution, metabolism and excretion (ADME) and bioavailability indicate that iron, once taken up into the epithelial cells of the gut, is subject to the same mechanisms of regulation and absorption as that of other forms of iron. Further studies provided in the context of the toxicological assessment indicate that the NF does not lead to iron bioaccumulation in tissues and organs at the doses tested. The Panel notes that the NF contains nickel at concentrations that may increase the risk of flare-up reactions in nickel-sensitised young individuals up to 10 years of age. In the 90-day toxicity study, findings related to haematology, clinical biochemistry and organ weights were observed and the Panel defined a no observed adverse effect level (NOAEL) of 231 mg/kg body weight (bw) per day, that is, the mid-dose used in the study. The Panel considers that the NF is a source from which iron is bioavailable and it is safe under the proposed conditions of use.

The dissolution of stone wool fibers with sugar-based binder and oil in different synthetic lung fluids

The biopersistence of fiber materials is one of the cornerstones in estimating potential risk to human health upon inhalation. To connect epidemiological and in vivo investigations with in vitro studies, reliable and robust methods of fiber biopersistence determination and understanding of fiber dissolution mechanism are required. We investigated dissolution properties of oil treated stone wool fibers with and without sugar-based binder (SBB) at 37 °C in the liquids representing macrophages intracellular conditions (pH 4.5). Conditions varied from batch to flow of different rates. Fiber morphology and surface chemistry changes caused by dissolution were monitored with scanning electron microscopy and time-of-flight secondary ion mass spectrometry mapping. Stone wool fiber dissolution rate depends on liquid composition (presence of ligands, such as citrate), pH, reaction products transport and fibers wetting properties. The dissolution rate decreases when: 1) citrate is consumed by the reaction with the released Al cations; 2) the pH increases during a reaction in poorly buffered solutions; 3) the dissolution products are accumulated; 4) fibers are not fully wetted with the fluid. Presence of SBB has no influence on dissolution rate if fiber material was wetted prior to dissolution experiment to avoid poorly wetted fiber agglomerates formation in the synthetic lung fluids.

Particle characterisation and bioaccessibility of manganese in particulate matter in silico- and ferromanganese smelters

The aim of this study was to characterise particulate matter (PM) collected in the furnace area during SiMn and high carbon (HC)-FeMn production in terms of single particle analysis and to determine the bioaccessibility of Mn in the PM in a simulated lung fluid. Airborne PM was collected with Sioutas cascade impactors and respirable cyclones in the breathing zone of tappers and crane operators. Stationary samples were collected from the furnace area with a nanoMOUDI cascade impactor and an ESPnano electrostatic particle collector. Individual particles were characterised by scanning and transmission electron microscopy. Bioaccessibility of Mn was studied in terms of the dissolution of Mn in Gamble solution (24 hours leaching at 37 °C) relative to total Mn. Slag particles, alloy fragments, Mn and Fe oxides as well as carbonaceous particles were observed in the size fraction > 1 μm aerodynamic diameter (d_ae). Thermally generated condensation particles dominated the d_ae size range of 0.18-1 μm collected from the tapping fumes, while carbonaceous particles dominated the fraction below 0.18 μm. Condensation generated particles from the furnace area of HC-FeMn production were coated with an amorphous Si-O rich surface layer which seemed to hold primary particles together as aggregates. In the same size range, the particles from the furnace area of SiMn production were dominated by spherical condensation particles rich in Si, Mn and O, but without a Si-O rich surface layer. Instead, the Mn oxides were enclosed in an amorphous Si-O rich matrix. The bioaccessibility of Mn was low to moderate (<30%), but higher for SiMn furnace workers (highest median = 23%) than HC-FeMn furnace workers (highest median = 12%). This difference in bioaccessibility was significant for PM with d_ae up to 2.5 μm, and most pronounced in the d_ae size range between 0.25 and 1.0 μm. Also, a significantly higher bioaccessibility of Mn was found for PM larger than d_ae of 0.5 μm collected among crane operators compared to tappers in the HC-FeMn smelter.

Hydrogel nanoparticle degradation influences the activation and survival of primary macrophages

The effect of nanoparticle (NP) internalization on cell fate has emerged as an important consideration for nanomedicine design, as macrophages and other phagocytes are the primary clearance mechanisms of administered NP formulations. Pro-survival signaling is thought to be concurrent with phagocytosis and recent work has shown increased macrophage survival following lysosomal processing of internalized NPs. These observations have opened the door to explorations of NP physiochemical properties aimed at tuning the NP-driven macrophage survival at the lysosomal synapse. Here, we report that NP-induced macrophage survival and activation is strongly dependent on NP degradation rate using a series of thiol-containing poly(ethylene glycol) diacrylate-based NPs of equivalent size and zeta potential. Rapidly degrading, high thiol-containing NPs allowed for dramatic enhancement of cell longevity that was concurrent with macrophage stimulation after 2 weeks in ex vivo culture. While equivalent NP internalization resulted in suppressed caspase activity across the NP series, macrophage activation was correlated with increasing thiol content, leading to increased lysosomal activity and a robust pro-survival phenotype. Our results provide insight on tuning NP physiochemical properties as design handles for maximizing ex vivo macrophage longevity, which has implications for improving macrophage-based immune assays, biomanufacturing, and cell therapies.

Development of a simulated lung fluid leaching method to assess the release of potentially toxic elements from volcanic ash

Freshly erupted volcanic ash contains a range of soluble elements, some of which can generate harmful effects in living cells and are considered potentially toxic elements (PTEs). This work investigates the leaching dynamics of ash-associated PTEs in order to optimize a method for volcanic ash respiratory hazard assessment. Using three pristine (unaffected by precipitation) ash samples, we quantify the release of PTEs (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, Zn) and major cations typical of ash leachates (Mg, Na, Ca, K) in multiple simulated lung fluid (SLF) preparations and under varying experimental parameters (contact time and solid to liquid ratio). Data are compared to a standard water leach (WL) to ascertain whether the WL can be used as a simple proxy for SLF leaching. The main findings are: PTE concentrations reach steady-state dissolution by 24 h, and a relatively short contact time (10 min) approximates maximum dissolution; PTE dissolution is comparatively stable at low solid to liquid ratios (1:100 to 1:1000); inclusion of commonly used macromolecules has element-specific effects, and addition of a lung surfactant has little impact on extraction efficiency. These observations indicate that a WL can be used to approximate lung bioaccessible PTEs in an eruption response situation. This is a useful step towards standardizing in vitro methods to determine the soluble-element hazard from inhaled ash.

Guidance on risk assessment of nanomaterials to be applied in the food and feed chain: human and animal health

The EFSA has updated the Guidance on risk assessment of the application of nanoscience and nanotechnologies in the food and feed chain, human and animal health. It covers the application areas within EFSA's remit, including novel foods, food contact materials, food/feed additives and pesticides. The updated guidance, now Scientific Committee Guidance on nano risk assessment (SC Guidance on Nano-RA), has taken account of relevant scientific studies that provide insights to physico-chemical properties, exposure assessment and hazard characterisation of nanomaterials and areas of applicability. Together with the accompanying Guidance on Technical requirements for regulated food and feed product applications to establish the presence of small particles including nanoparticles (Guidance on Particle-TR), the SC Guidance on Nano-RA specifically elaborates on physico-chemical characterisation, key parameters that should be measured, methods and techniques that can be used for characterisation of nanomaterials and their determination in complex matrices. The SC Guidance on Nano-RA also details aspects relating to exposure assessment and hazard identification and characterisation. In particular, nanospecific considerations relating to in vitro/in vivo toxicological studies are discussed and a tiered framework for toxicological testing is outlined. Furthermore, in vitro degradation, toxicokinetics, genotoxicity, local and systemic toxicity as well as general issues relating to testing of nanomaterials are described. Depending on the initial tier results, additional studies may be needed to investigate reproductive and developmental toxicity, chronic toxicity and carcinogenicity, immunotoxicity and allergenicity, neurotoxicity, effects on gut microbiome and endocrine activity. The possible use of read-across to fill data gaps as well as the potential use of integrated testing strategies and the knowledge of modes or mechanisms of action are also discussed. The Guidance proposes approaches to risk characterisation and uncertainty analysis.

Airborne particles in city bus: concentrations, sources and simulated pulmonary solubility

PM10 and PM2.5 concentrations in Ljubljana city bus were monitored during entire shift, and individual particles were morphologically and chemically characterised in order to determine PM concentration variability, particle sources, solubility in simulated pulmonary environment and effects on human health. PM measurements revealed high mean PM10 (82.8 μg/m³) and PM2.5 (47 μg/m³), which were highest and most variable during rush hours with fluid traffic and lowest during traffic jams with standing vehicles. Individual particle analysis showed that airborne particles were dominated by metal-bearing phases, particularly small-sized (Cr,Mn,Zn)-bearing Fe-oxyhydroxides and Al-/Fe-Al-oxides, large (Fe,Cr,Ni)- and (Cu,Zn,Ni)-alloys, and small-sized Sb-sulphide and Ba-sulphate. Non-metallic phases were represented by (Ca,Mg)-carbonates, Al-silicates, Na-chloride and Ca-sulphate. Comparison with possible source materials (vehicle exhaust emissions, brake disc dust and road sediment) showed that primary sources of these metal-bearing phases were wear of brake discs, brake pads and tyres, and also wear of engine components and catalytic converters. Most non-metallic phases originated from resuspension of road sediment, containing road sanding materials, but also from emissions of burned fuel and lubricating oil (Ca-sulphate). Assessment of effects on human health indicated that mean PM concentrations, which significantly exceeded daily limit values, increased mortality (by 2-3%) and morbidity (by 7-8%) risk for bus drivers. Simplified PHREEQC calculations of airborne metal-bearing phase solubility in aqueous solutions simulating pulmonary environment showed that metallic Fe, Ba-sulphate, Sb-sulphide and Al-oxide, partly also Cu-bearing metal alloys, were soluble under reducing and oxidising conditions, but released metals were removed from solution by precipitation of stable secondary metal-bearing phases.

Metal Ion Release from Engineered Stone Dust in Artificial Lysosomal Fluid-Variation with Time and Stone Type

Inhalational exposure to dust from engineered stone (ES), also known as artificial or composite stone, is associated with a specific disease profile, namely accelerated silicosis, and scleroderma. The pathogenic mechanisms are poorly understood, particularly the role of resin and metal ions. Metal ions are present in pigments and constituent minerals and may be considered potential contributors to toxicity. The aim of this preliminary study was to understand the solubility of ES-containing metals in artificial lysosomal fluid (ALF) simulating the acidic intracellular environment of the lung macrophage lysosome. Differences with respect to ES types and temporal release were explored. Ten ES products of variable colour and company origin were comminuted and assessed for four different metals, solubilized into ALF solutions at 1,2,4 and 8 weeks at 37 °C. There was significant variability in metal release, particularly with regard to iron and manganese, which could be correlated with the reflected brightness of the stone. A majority of the available Mn, Fe, Al and Ti was solubilized. Time trends for metal release varied with ES type but also with metal ion. The data suggest a high metal ion bioavailability once engulfed by lung macrophages. There is a need to investigate a wider range of ES dust and relate metal content to markers of ES toxicity.

Tracing the sources of bioaccessible metal(loid)s in urban environments: A multidisciplinary approach

Understanding the links between sources of magnetic particles and bioaccessibility of metal(loids) in environmental sampling media is crucial for better evaluating human health risks, although relevant information in the scientific literature is scarce. Here, soil, road and house dust samples from a heavy industrial area in Greece were characterized in a multidisciplinary study combining magnetic measurements, SEM/EDS analyses, bioaccessibility measurements and Pb isotopic analyses of bioaccessible Pb. The oral and inhalable bioaccessible fractions of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn were assessed by applying simulated gastric and lung solutions. SEM/EDS analysis revealed the abundant presence of anthropogenic Fe-containing spherules of industrial origin in all sampling media, often containing minor contents of Cr, Cu, Mn, Pb and Zn. The inhalation bioaccessibility (%) in all environmental compartments was higher than the oral one for most elements analyzed in the present study. Clear associations between magnetic susceptibility and bioaccessible amounts of most of analyzed elements were encountered for the soil and road dust. The isotopic analyses of bioaccessible Pb showed that there are significant differences in the isotopic ratios between total and bioaccessible Pb. We conclude that Pb solubilized by the simulated gastric and lung extractions is principally anthropogenic, representing a mixture of industrial Pb and Pb related to the past usage of leaded petrol. Low values of ²⁰⁶Pb/²⁰⁷Pb were accompanied by high bioaccessible contents of Cd, Pb and Zn indicating that anthropogenic (mostly industrial) sources exert influence on the bioaccessible forms of these metals. Coupling magnetic and bioaccessibility measurements with stable isotopic technique of bioaccessible Pb is more reliable for determining Pb and other metal sources with high oral and inhalation bioaccessibility.

Ionic-strength and pH dependent reactivities of ascorbic acid toward ozone in aqueous micro-droplets studied using aerosol optical tweezers

The heterogeneous oxidation reaction of single aqueous ascorbic acid (AH2) aerosol particles with gas-phase ozone was investigated in this study utilizing aerosol optical tweezers with Raman spectroscopy. The measured liquid-phase bimolecular rate coefficients of the AH2 + O3 reaction exhibit a significant pH dependence, and the corresponding values at ionic strength 0.2 M are (3.1 ± 2.0) × 105 M-1 s-1 and (1.2 ± 0.6) × 107 M-1 s-1 for pH ≈ 2 and 6, respectively. These results measured in micron-sized droplets are in agreement with those from previous bulk measurements, indicating that the observed aerosol reaction kinetics can be solely explained by liquid phase diffusion and AH2 + O3 reaction. Furthermore, the results indicate that high ionic strengths could enhance the liquid-phase rate coefficients of the AH2 + O3 reaction. The results also exhibit a negative ozone pressure dependence that can be rationalized in terms of a Langmuir-Hinshelwood type mechanism for the heterogeneous oxidation of AH2 aerosol particles by gas-phase ozone. The results of the present work imply that in acidified airway-lining fluids the antioxidant ability of AH2 against atmospheric ozone will be significantly suppressed.

Simulated biological fluids - a systematic review of their biological relevance and use in relation to inhalation toxicology of particles and fibres

The use of simulated biological fluids (SBFs) is a promising in vitro technique to better understand the release mechanisms and possible in vivo behaviour of materials, including fibres, metal-containing particles and nanomaterials. Applications of SBFs in dissolution tests allow a measure of material biopersistence or, conversely, bioaccessibility that in turn can provide a useful inference of a materials biodistribution, its acute and long-term toxicity, as well as its pathogenicity. Given the wide range of SBFs reported in the literature, a review was conducted, with a focus on fluids used to replicate environments that may be encountered upon material inhalation, including extracellular and intracellular compartments. The review aims to identify when a fluid design can replicate realistic biological conditions, demonstrate operation validation, and/or provide robustness and reproducibility. The studies examined highlight simulated lung fluids (SLFs) that have been shown to suitably replicate physiological conditions, and identify specific components that play a pivotal role in dissolution mechanisms and biological activity; including organic molecules, redox-active species and chelating agents. Material dissolution was not always driven by pH, and likewise not only driven by SLF composition; specific materials and formulations correspond to specific dissolution mechanisms. It is recommended that SLF developments focus on biological predictivity and if not practical, on better biological mimicry, as such an approach ensures results are more likely to reflect in vivo behaviour regardless of the material under investigation.

Respiratory bioaccessibility and solid phase partitioning of potentially harmful elements in urban environmental matrices

Studies regarding the role of geochemical processes in urban environmental matrices (UEM) and their influence on respiratory bioaccessibility in humans are scarce in humid tropical regions, especially in Brazil. Contaminated UEM are potentially hazardous to humans if particles <10 μm in diameter are inhaled and reach the tracheobronchial region. In this study, we evaluated samples collected in Brazilian UEMs with a large environmental liability left by former mining industries and in a city with strong industrial expansion. UEM samples were classified into soil, sediment and mine tailings according to the characteristics of the collection sites. The respiratory bioaccessibility of potentially harmful elements (PHE) was evaluated using artificial lysosomal fluid (ALF, pH 4.5), and the BCR-sequential extraction was performed to evaluate how the respiratory bioaccessibility of the PHE was related to the solid phase partitioning. The bioaccessible fraction (BAF) ranged from 54 to 98% for Cd; 21-89% for Cu; 46-140% for Pb, 35-88% for Mn and; 41-84% for Zn. The average BAF of the elements decreased in the following order: Soil: Cd > Pb > Mn > Zn > Cu; Tailing: Pb > Cd > Zn > Mn > Cu; and Sediments: Pb > Mn > Cd > Zn > Cu. BCR-fractions were useful to predict the PHE bioaccessibility (R² = 0.79-0.98), thus suggesting that particle geochemistry and mineralogy can influence PHE behaviour in the pulmonary fluid. Therefore, this approach provides a combination of quantitative and qualitative data, which allows us to carry out a more realistic assessment of the current situation of the potentially contaminated site and possible alternatives for decision making by the stakeholders.

Bioaccessibility of potentially toxic elements in mine residue particles

Mining companies used to abandon tailing heaps in countryside regions of Mexico and other countries. Mine residues (MRs) contain a high concentration of potentially toxic elements (PTE). The wind can disperse dust particles (<100 μm) and once suspended in the atmosphere, can be ingested or inhaled; this is a common situation in arid climates. Nowadays, there is little information on the risk of exposure to PTEs from particulate matter dispersed by wind. The pseudo-total PTE in bulk and fractionated MR after aqua regia digestion, the inhalable bioaccessibility with Gamble solution (pH = 7.4), and the gastric bioaccessibility with 0.4 M glycine solution at pH 1.5 were determined. As and Pb chemical species were identified by X-ray absorption near-edge structure (XANES) spectroscopy. The highest rate of dispersion was observed with 74-100 μm particles (104 mg m-2 s-1); in contrast, particles <44 μm had the lowest rate (26 mg m-2 s-1). The highest pseudo-total As (35 961 mg kg-1), Pb (3326 mg kg-1), Cd (44 mg kg-1) and Zn (up to 4678 mg kg-1) concentration was in the <20 μm particles and As in the 50-74 μm (40 236 mg kg-1) particles. The highest concentration of inhaled bioaccessible As (343 mg kg-1) was observed in the <20 μm fraction and the gastric bioaccessible As was 744 mg kg-1, Pb was 1396 mg kg-1, Cd was 19.2 mg kg-1, and Zn was 2048 mg kg-1. The predominant chemical As species was arsenopyrite (92%), while 54% of Pb was in the adsorbed form. Erodible particle matter is a potential risk for humans in case of inhalation or ingestion.

Effects of albumin, transferrin and humic-like substances on iron-mediated OH radical formation in human lung fluids

Inhalation of particulate matter is hypothesized to contribute to health effects by overproducing reactive oxygen species (ROS) and inducing oxidative stress. Fe(II) has been shown to contribute to ROS generation in acellular simulated lung fluids. Atmospheric humic-like substances (HULIS) have been shown to chelate Fe(II) and significantly enhance this ROS generation. Here, we investigate Fe(II)-mediated ^.OH generation from the iron active proteins in lung fluid, albumin and transferrin, and fulvic acid, a surrogate for HULIS, in human bronchoalveolar lavage fluid (BALF). We find that albumin enhances ^.OH generation from inorganic Fe(II) and that transferrin attenuates this enhancement. We estimate the rate constants for albumin-Fe(II) and fulvic acid-Fe(II) mediated O₂^.- reduction (1.9 ± 0.3) M^-1 s^-1 and (2.7 ± 0.3) M^-1s^-1 (pH = 5.5, T = 37 °C), 17-25 times the rate for free iron, which we measured to be (110 ± 20) × 10^-3 M^-1s^-1, in agreement with the literature. ^.OH generation measured from fulvic acid-Fe(II) in BALF from 8 individuals with added fulvic acid is successfully predicted rates of ^.OH generation by mixtures of Fe(II), albumin, transferrin, fulvic acid, and ascorbate in saline solution. This indicates that fulvic acid enhances ^.OH formation in BALF, and that albumin and transferrin in BALF moderate the effect. We propose that fulvic acid, and thereby HULIS, is capable of mobilizing Fe(II) away from albumin and transferrin and this increases the formation rate of O₂^.- and ultimately of ^.OH. Furthermore, we find that albumin and transferrin have significantly different impacts on Fe(II)-mediated ^.OH than citrate, a common component of simulated lung fluids, a factor that should be considered carefully in the interpretation of results obtained from solutions containing citrate.

Understanding how methodological aspects affect the release of trace metal(loid)s from urban dust in inhalation bioaccessibility tests

The bioaccessibility of metal(loid)s in ambient particulate matter (PM) has been recently used to represent the risk of inhalation exposure. Nevertheless, different methodological factors affect the bioaccessibility values; among these, the type and composition of surrogate biological fluids and the liquid to solid ratio have been revealed to be the most important. To better understand how these methodological aspects affect the bioaccessibility, a reference material corresponding to urban dust (SRM1648a) was contacted with synthetic biological fluids commonly used in the literature representing surrogate fluids that may interact with fine (Gamble's solutions, artificial lysosomal fluid (ALF)) and coarse particles (gastric fluid), for liquid to solid (L/S) ratios ranging from 500 to 20,000. Visual MINTEQ 3.1. was used to enhance the discussion on how the solubility of metals in the leaching solution depends on the composition of the simulated fluids and the speciation of metals. The results obtained indicate that a small change in the composition of Gamble's solution (the presence of glycine) may increase significantly the bioaccessibility at a L/S ratio of 5,000. The highest bioaccessibility of most of the studied metal(loid)s at a L/S ratio of 5,000 was found for ALF fluid. The study of the effect of the L/S ratio showed that metal(loid)s bioaccessibility in Gamble's fluid increased logarithmically with increasing L/S ratio, while it remained practically constant in ALF and gastric fluid. This different behavior is explained assuming that the leaching of metal(loid)s in Gamble's solution is solubility-controlled, while in ALF and gastric fluid is availability-controlled.

Thoracic Fraction (PM10) of Resuspended Urban Dust: Geochemistry, Particle Size Distribution and Lung Bioaccessibility

A fluidized bed aerosol generator was connected to a 13-stage cascade impactor (nanoMOUDI) for the size fractionation of urban dust (<10 µm), followed by the gravimetric analysis of loaded PTFE filter samples. This method was used to characterize the PM10 (thoracic) fraction of road dust sampled from expressways, arterial roads and local roads in Toronto, Canada. The fine particle fractions (<1.8 µm) of all the studied samples accounted for 51–72% of the resuspended PM10 (by weight). Elemental analysis using ICP-MS and ICP-OES revealed an overall trend of element enrichment in the <1.8 µm fraction compared to the coarse fraction (1.8–10 µm) of the road dust. By contrast, archived house dust samples displayed the reverse trend for most elements. The lung bioaccessibility of target elements (Al, B, Ba, Co, Cr, Fe, La, Mn, Mo, Sb, Sr, Ti, V and Zn) was assessed for each road dust fraction using 0.1 M ammonium citrate (pH 4.4) to simulate intracellular fluid and Gamble solution (pH 7.2) to simulate interstitial lung fluid. The <1.8 µm fraction of local road dust displayed significantly higher bioaccessibility (p < 0.05) for Zn when using Gamble solution, and for seven out of the 14 target elements when using ammonium citrate. These results show the importance of characterizing the fine fraction of road dust.

Bioaccessibility of potentially toxic metals in soil, sediments and tailings from a north Africa phosphate-mining area: Insight into human health risk assessment

The risk assessment of phosphate mining/processing industrial activities on the environment and human health is crucial to properly manage and minimize the risks over time. In this work, we studied the inhalation and dermal bioaccessibility of potentially toxic metals (PTM) in different particle-size fractions of urban soil, sediments and tailings from Gafsa-Metlaoui phosphate mining area, to assess afterwards the non-carcinogenic (NCR) and carcinogenic (CR) risks for the health of local citizens and workers constantly exposed to airborne particulate matter (PM) originating from these sources of contamination. Samples were separated in particle-size fractions by centrifugation and consecutive cycles of sedimentation and decanting. The pseudo-total concentrations and bioaccessible fractions of PTM were extracted by aqua regia and in vitro bioaccessibility tests, respectively. Both sediments and tailings showed higher-than-background concentrations of PTM (mainly Cd, Zn and Cr), with a tendency to accumulate these metals in fine particles (<10 μm). In urban soil, only Cd was above the background concentration. The bioaccessibility of PTM via inhalation was significantly higher in artificial lysosomal fluid (ALF) than in simulated epithelial lung fluid (SELF): basically, Cd was the most bioaccessible metal (relative bioaccessibility up to 80%), followed by the medium-to-high bioaccessible Zn (47%), Pb (46%) and Cu (39%), and the least bioaccessible Cr (16%). In synthetic skin surface liquid (NIHS 96-10), only Cd was bioaccessible at worrying extent (20-44%). On the basis of US.EPA risk assessment, the exposure to PTM bioaccessible fractions or pseudo-total concentrations would not cause serious NCR and CR risks for human health. Significant health risks (Hazard Index >1 and CR > 10^-4), especially for children, can occur if ingestion route is also considered. The findings underline the need for adequate protection of contaminated soil, sediments and mine tailings laying nearby urban agglomerates, to reduce the health risks for inhabitants and workers of Gafsa-Metlaoui mining area.

New Insights into Health Risk Assessments for Inhalational Exposure to Metal(loid)s: The Application of Aqueous Chemistry Modelling in Understanding Bioaccessibility from Airborne Particulate Matter

Aqueous modelling of chemical speciation in simulated lung fluid (SLF) enables a better understanding of the underlying chemical factors that influence metal(loid) inhalation bioaccessibility from airborne particulate matter. Such an approach can be used to supplement experimental techniques that are integral to the health risk assessment of metal(loid) exposure by inhalational routes. In this paper, we modelled the aqueous chemistry of airborne particulate-bound metal(loid)s (As, Cu, Mn, Pb and Zn) in a SLF based on Gamble’s solution (neutral pH). The modelling was performed using two software packages (Geochemist’s Workbench 14 and OLI Studio 9.5) and a total of five thermochemical databases (GWB Thermo, MINTEQ, PHREEQC, WATEQ4F and the default database for OLI Studio). Modelled results were compared with experimentally determined bioaccessibilities for the NIST 2710a standard reference material (SRM) and with literature-reported bioaccessibilities for NIST 1648a and BCR 038 SRMs. Whilst the models correctly describe the observed increase in bioaccessibility for more dilute solid/liquid extraction ratios, the performance of the models against the fractional bias of the mean (FBmean) and the normalised mean square error (NMSE) statistical metrics was generally outside the acceptance criteria. Findings from an analysis of the main aqueous chemical species predicted to be present in SLF indicate that carbonate and chloride complexes of Cu, Mn, Pb and Zn predominate, whilst free cations (for Cu, Mn and Zn) and hydroxides (for Cu) also play a role in solubilisation. Arsenic is not predicted to form significant complexes with the SLF components and is present in solution mainly as the HAsO42− ion and its conjugate acid, H2AsO4−. For modelled runs where glycine and citrate were present, significant increases in the bioavailability of Cu and Zn were predicted as a result of complexation with these ligands. An additional finding from our experimental bioaccessibility results for NIST 2710a was that the inclusion of the lung fluid surfactant dipalmitoylphosphatidylcholine (DPPC) in the SLF did not significantly affect the bioaccessibility. Our study provides useful insights into the likely aqueous- and solid-phase speciation of metal(loid)s in SLF and highlights that future developments in this area should consider the role of mineralogy and surface interactions.

Physical, chemical, and toxicological characterization of sulfated cellulose nanocrystals for food-related applications using in vivo and in vitro strategies

Cellulose nanocrystals (CNCs) are a next-generation cellulose product with many unique properties including applications in the food industry as a food additive, food coating, and in food-contact packaging material. While CNC is anticipated to be safe due to its similarity to the many forms of cellulose currently used as food additives, special consideration is given to it as it is the first manufactured form of cellulose that is nanoscale in both length and width. A proactive approach to safety has been adopted by manufacturers to demonstrate CNC safety toward responsible commercialization. As part of the safety demonstration, in vivo and in vitro testing strategies were commissioned side-by-side with conventional cellulose, which has been safely used in food for decades. Testing included a 90-day rodent feeding study as well as additional physical, chemical, and biological studies in vitro that follow European Food Safety Authority (EFSA) guidance to demonstrate the safe use of novel food ingredients. The strategy includes assessment of neat materials side-by-side with simulated digestion, mimicking conditions that occur along the gastrointestinal tract as well as intracellularly. An intestinal co-culture model examined any potential toxicological effects from exposure to either pristine or digested forms of CNC including cytotoxicity, metabolic activity, membrane permeability, oxidative stress, and proinflammatory responses. None of the studies demonstrated any toxicity via oral or simulated oral exposure. These studies demonstrate that CNC produced by InnoTech Alberta is similarly safe by ingestion as conventional cellulose with a no-observed-adverse-effect level of 2085.3 (males) and 2682.8 (females) mg/kg/day.