1
|
Hasan MI, Wang J, Tajvidi M. Controlled shrinkage of cellulose nanofibril films to enhance mechanical and barrier properties. Carbohydr Polym 2024; 342:122390. [PMID: 39048230 DOI: 10.1016/j.carbpol.2024.122390] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/04/2024] [Revised: 05/25/2024] [Accepted: 06/08/2024] [Indexed: 07/27/2024]
Abstract
Standalone cellulose nanofibril (CNF) films have a natural tendency to shrink upon drying from wet conditions due to capillary drying stresses. This shrinkage happens in both the radial direction, and the vertical direction. In this study, we prepared two types of CNF films- one in a restrained condition that did not allow shrinkage in the radial direction but enabled it in the vertical direction and another with 11 % radial shrinkage but limited vertical shrinkage. The radial shrinkage led to a more porous structure than the vertical shrinkage, which brought about poorer oxygen/moisture barrier performance. However, the density and oxygen permeability of the films converged to a similar value upon a simple thermocompression process. Radial shrinkage resulted in 140 % and 90 % higher strain at break and toughness in films with a significant sacrifice in strength and modulus. Scanning electron microscopy revealed that radial shrinkage formed wavy layers in the core structure leaving more free space, whereas vertical shrinkage formed flatter layers. Radial shrinkage is likely to produce a thicker individual layer in the core structure of CNF films than vertical shrinkage. The insight from this study will help tune the mechanical and barrier performance of CNF films and their composites.
Collapse
Affiliation(s)
- Md Ikramul Hasan
- School of Forest Resources, University of Maine, 5755 Nutting Hall, Orono, ME 04469, USA; Advanced Structures and Composites Center, University of Maine, 35 Flagstaff Road, Orono, ME 04469, USA.
| | - Jinwu Wang
- School of Forest Resources, University of Maine, 5755 Nutting Hall, Orono, ME 04469, USA; Forest Products Laboratory, U.S. Forest Service, 1 Gifford Pinchot Drive, Madison, WI 53726, USA; Advanced Structures and Composites Center, University of Maine, 35 Flagstaff Road, Orono, ME 04469, USA.
| | - Mehdi Tajvidi
- School of Forest Resources, University of Maine, 5755 Nutting Hall, Orono, ME 04469, USA; Advanced Structures and Composites Center, University of Maine, 35 Flagstaff Road, Orono, ME 04469, USA.
| |
Collapse
|
2
|
Sun J, Wen Z, Khan MA, Lv K, Shen H, Dai L, Li Y, Ding Y, Liu C, Li MC. A review of cellulose nanomaterial-stabilized Pickering foam: Formation, properties, and emerging oilfield applications. Int J Biol Macromol 2024:136274. [PMID: 39374724 DOI: 10.1016/j.ijbiomac.2024.136274] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/14/2024] [Revised: 09/28/2024] [Accepted: 10/02/2024] [Indexed: 10/09/2024]
Abstract
The rapid development of the petroleum industry has led to increasing demands for high-performance oilfield working fluids, such as drilling fluids, fracturing fluids, and fluids for enhanced oil recovery. Liquid foam is widely utilized as the oilfield working fluids due to its advantages, including low density, high mobility, superior cutting suspending ability, excellent fluid diversion capacity, and outstanding sweep efficiency. However, the short lifespan of foam limits its broad application in the oilfield. Considering the advantages of environmental protection, renewability, high specific surface area, tailorable surface chemistry, and excellent rheological properties of cellulose nanomaterials (CNMs), Pickering foams stabilized by CNMs offer improved eco-friendliness and foam stability. In this review, the classification and preparation methods of CNMs are briefly introduced. Subsequently, the preparation methods, properties, and application prospects of CNM-stabilized Pickering foams as oilfield working fluids are summarized. Finally, the challenges and prospects of CNM-stabilized Pickering foam are outlined, aiming to pave the way for the development of petroleum industry in an eco-friendlier manner.
Collapse
Affiliation(s)
- Jinsheng Sun
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China; Key Laboratory of Unconventional Oil & Gas Development (China University of Petroleum (East China)), Ministry of Education, Qingdao, Shandong 266580, China
| | - Zhibo Wen
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Muhammad Arqam Khan
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China; Department of Petroleum Engineering, NED University of Engineering & Technology, Pakistan
| | - Kaihe Lv
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China; Key Laboratory of Unconventional Oil & Gas Development (China University of Petroleum (East China)), Ministry of Education, Qingdao, Shandong 266580, China
| | - Haokun Shen
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Liyao Dai
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Yecheng Li
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Yang Ding
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Chaozheng Liu
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Mei-Chun Li
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China; Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China; Key Laboratory of Unconventional Oil & Gas Development (China University of Petroleum (East China)), Ministry of Education, Qingdao, Shandong 266580, China.
| |
Collapse
|
3
|
Shruthi S, Vishalakshi B. Development of banana pseudo stem cellulose fiber based magnetic nanocomposite as an adsorbent for dye removal. Int J Biol Macromol 2024; 278:134877. [PMID: 39163967 DOI: 10.1016/j.ijbiomac.2024.134877] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/24/2024] [Revised: 08/07/2024] [Accepted: 08/17/2024] [Indexed: 08/22/2024]
Abstract
A hybrid hydrogel nanocomposite derived from cellulose fiber extracted from Banana Pseudo Stem (BPS) was developed as an adsorbent material for wastewater treatment. The hydrogel was developed by graft copolymerization of N-hydroxyethylacrylamide on Cellulose Fiber (BPSCF-g-PHEAAm) with potassium peroxodisulphate (KPS) as an initiator and N, N'-methylene bisacrylamide (MBA) as a crosslinker using microwave irradiation. Magnetic nanoparticles generated by an in-situ method were incorporated into the network structure. Fourier Transform Infrared Spectroscopy (FTIR), Powder X-ray Diffraction (XRD), Thermogravimetric analysis (TGA), Vibrating Sample Magnetometer (VSM), Brunauer-Emmett-Teller analysis (BET), Field Emission Scanning Electron Microscopy (FESEM), and Energy Dispersive Spectrometer (EDS) were employed. The adsorption capacities of hydrogel and its nanocomposite were evaluated using Methylene Blue (MB) and Crystal Violet (CV) as model dyes. The parent gel exhibited the maximum absorption capacity of 235, and 219 mg g-1 towards MB and CV respectively which was enhanced to 320 and 303 mg g-1 for the nanocomposite. Adsorption data were best fitted with the pseudo-second-order kinetic model and the Freundlich isotherm model. Negative ΔG° and positive ΔH° indicated spontaneous and endothermic adsorption. Desorption was effective to an extent of 99 % in the HCl medium suggesting high reusability potential of the developed adsorbent material.
Collapse
Affiliation(s)
- S Shruthi
- Department of Post-Graduate Studies and Research in Chemistry, Mangalore University, Mangalagangothri 574199 (DK), Karnataka, India
| | - B Vishalakshi
- Department of Post-Graduate Studies and Research in Chemistry, Mangalore University, Mangalagangothri 574199 (DK), Karnataka, India.
| |
Collapse
|
4
|
Ren H, Huang Y, Yang W, Ling Z, Liu S, Zheng S, Li S, Wang Y, Pan L, Fan W, Zheng Y. Emerging nanocellulose from agricultural waste: Recent advances in preparation and applications in biobased food packaging. Int J Biol Macromol 2024; 277:134512. [PMID: 39111480 DOI: 10.1016/j.ijbiomac.2024.134512] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2024] [Revised: 07/30/2024] [Accepted: 08/03/2024] [Indexed: 08/11/2024]
Abstract
With the increasing emphasis on sustainability and eco-friendliness, a novel biodegradable packaging materials has received unprecedented attention. Nanocellulose, owing to its high crystallinity, degradability, minimal toxicity, and outstanding biocompatibility, has gained considerable interest in the field of sustainable packaging. This review provided a comprehensive perspective about the recent advances and future development of cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs). We first introduced the utilization of agricultural waste for nanocellulose production, such as straw, bagasse, fruit byproducts, and shells. Next, we discussed the preparation process of nanocellulose from various agricultural wastes and expounded the advantages and shortcomings of different methods. Subsequently, this review offered an in-depth investigation on the application of nanocellulose in food packaging, especially the function and packaged form of nanocellulose on food preservation. Finally, the safety evaluation of nanocellulose in food packaging is conducted to enlighten and promote the perfection of relevant regulatory documents. In short, this review provided valuable insights for potential research on the biobased materials utilized in future food packaging.
Collapse
Affiliation(s)
- Haiwei Ren
- School of Life Science and Engineering, Lanzhou University of Technology, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China; China Northwest Collaborative Innovation Center of Low-carbon Unbanization Technologies of Gansu and MOE, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China
| | - Yu Huang
- School of Life Science and Engineering, Lanzhou University of Technology, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China
| | - Weixia Yang
- School of Life Science and Engineering, Lanzhou University of Technology, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China; China Northwest Collaborative Innovation Center of Low-carbon Unbanization Technologies of Gansu and MOE, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China.
| | - Zhe Ling
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, PR China
| | - Sifan Liu
- School of Life Science and Engineering, Lanzhou University of Technology, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China
| | - Shiyu Zheng
- School of Life Science and Engineering, Lanzhou University of Technology, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China
| | - Siqi Li
- School of Life Science and Engineering, Lanzhou University of Technology, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China
| | - Yu Wang
- China Northwest Collaborative Innovation Center of Low-carbon Unbanization Technologies of Gansu and MOE, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China
| | - Lichao Pan
- School of Life Science and Engineering, Lanzhou University of Technology, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China
| | - Wenguang Fan
- School of Life Science and Engineering, Lanzhou University of Technology, 287 Langongping Road, Lanzhou, Gansu Province 730050, PR China
| | - Yi Zheng
- Department of Grain Science and Industry, Kansas State University, 101C BIVAP, 1980 Kimball Avenue, Manhattan, KS 66506, United States
| |
Collapse
|
5
|
Anukwah G, Gadzekpo V. Production of natural cellulose-based microfibres, from oil palm mesocarp fibres and pineapple leaf wastes, as porous supports for further applications. Heliyon 2024; 10:e37701. [PMID: 39309941 PMCID: PMC11416229 DOI: 10.1016/j.heliyon.2024.e37701] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/26/2024] [Revised: 09/07/2024] [Accepted: 09/09/2024] [Indexed: 09/25/2024] Open
Abstract
Natural cellulose-based microfibers were obtained through an economical and environmentally sustainable process called alkaline-peroxide purification, from the waste products of oil palm mesocarp fibres (OPMF) and pineapple leaves (PL), with the intention of creating porous, biodegradable, biocompatible, and non-toxic solid supports for use in future processes. The extracted microfibres were then taken through microscopic, spectroscopic and thermal characterisation to establish their cellulosic nature. The scanning electron microscopic (SEM) images of the bleached microfibres (B-OPMF and B-PLF) were cleaner, smoother and porous as compared with that of the unrefined fibres (Ur-OPMF and Ur-PLF). The bleached fibres (B-OPMF and B-PLF) exhibited peaks of C and O, which are indicative of pure cellulose, in the energy-dispersive X-ray spectroscopy (EDS) analysis. The FTIR spectral analysis of the extracted cellulose-based fibres (B-OPMF and B-PLF) exhibited peaks that were similar in composition to the reference cellulose (P-GB). For the thermogravimetric analysis (TGA) analysis, the maximum weight degradation in the reference cellulose (P-GB), occurred at 363.11 °C, in the bleached palm fibres (B-OPMF) at 334.55 °C and in the bleached pineapple leaf fibres (B-PLF) at 375.68 °C which, corresponds to cellulose decomposition. The differential scanning calorimetry (DSC) test verified the microfibers' thermally induced transitions. Therefore, these cellulose-based microfibres could be applied as functionalised microfibre supports for future applications.
Collapse
Affiliation(s)
- G.D. Anukwah
- Department of Chemistry, School of Physical Sciences, College of Agriculture and Natural Sciences, University of Cape Coast, Cape Coast, Ghana
| | - V.P.Y. Gadzekpo
- Department of Chemistry, School of Physical Sciences, College of Agriculture and Natural Sciences, University of Cape Coast, Cape Coast, Ghana
| |
Collapse
|
6
|
Arantes V, Las-Casas B, Dias IKR, Yupanqui-Mendoza SL, Nogueira CFO, Marcondes WF. Enzymatic approaches for diversifying bioproducts from cellulosic biomass. Chem Commun (Camb) 2024; 60:9704-9732. [PMID: 39132917 DOI: 10.1039/d4cc02114b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/13/2024]
Abstract
Cellulosic biomass is the most abundantly available natural carbon-based renewable resource on Earth. Its widespread availability, combined with rising awareness, evolving policies, and changing regulations supporting sustainable practices, has propelled its role as a crucial renewable feedstock to meet the escalating demand for eco-friendly and renewable materials, chemicals, and fuels. Initially, biorefinery models using cellulosic biomass had focused on single-product platform, primarily monomeric sugars for biofuel. However, since the launch of the first pioneering cellulosic plants in 2014, these models have undergone significant revisions to adapt their biomass upgrading strategy. These changes aim to diversify the bioproduct portfolio and improve the revenue streams of cellulosic biomass biorefineries. Within this area of research and development, enzyme-based technologies can play a significant role by contributing to eco-design in producing and creating innovative bioproducts. This Feature Article highlights our strategies and recent progress in utilizing the biological diversity and inherent selectivity of enzymes to develop and continuously optimize sustainable enzyme-based technologies with distinct application approaches. We have advanced technologies for standalone platforms, which produce various forms of cellulose nanomaterials engineered with customized and enhanced properties and high yields. Additionally, we have tailored technologies for integration within a biorefinery concept. This biorefinery approach prioritizes designing tailored processes to establish bionanomaterials, such as cellulose and lignin nanoparticles, and bioactive molecules as part of a new multi-bioproduct platform for cellulosic biomass biorefineries. These innovations expand the range of bioproducts that can be produced from cellulosic biomass, transcending the conventional focus on monomeric sugars for biofuel production to include biomaterials biorefinery. This shift thereby contributes to strengthening the Bioeconomy strategy and supporting the achievement of several Sustainable Development Goals (SDGs) of the 2030 Agenda for Sustainable Development.
Collapse
Affiliation(s)
- Valdeir Arantes
- Laboratory of Applied Bionanotechnology, Department of Biotechnology, Lorena School of Engineering, University of São Paulo, Lorena, SP, Brazil.
| | - Bruno Las-Casas
- Laboratory of Applied Bionanotechnology, Department of Biotechnology, Lorena School of Engineering, University of São Paulo, Lorena, SP, Brazil.
| | - Isabella K R Dias
- Laboratory of Applied Bionanotechnology, Department of Biotechnology, Lorena School of Engineering, University of São Paulo, Lorena, SP, Brazil.
| | - Sergio Luis Yupanqui-Mendoza
- Laboratory of Applied Bionanotechnology, Department of Biotechnology, Lorena School of Engineering, University of São Paulo, Lorena, SP, Brazil.
| | - Carlaile F O Nogueira
- Laboratory of Applied Bionanotechnology, Department of Biotechnology, Lorena School of Engineering, University of São Paulo, Lorena, SP, Brazil.
| | - Wilian F Marcondes
- Laboratory of Applied Bionanotechnology, Department of Biotechnology, Lorena School of Engineering, University of São Paulo, Lorena, SP, Brazil.
| |
Collapse
|
7
|
Chibh S, Singh A, Finkelstein-Zuta G, Koren G, Sorkin R, Beck R, Rencus-Lazar S, Gazit E. Amylum forms typical self-assembled amyloid fibrils. SCIENCE ADVANCES 2024; 10:eadp6471. [PMID: 39213351 PMCID: PMC11364109 DOI: 10.1126/sciadv.adp6471] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/04/2024] [Accepted: 07/25/2024] [Indexed: 09/04/2024]
Abstract
Amyloid fibril formation is a central biochemical process in pathology and physiology. Over decades, substantial advances were made in elucidating the mechanisms of amyloidogenesis, its links to disease, and the production of functional supramolecular structures. While the term "amyloid" denotes starch-like features of these assemblies, no evidence of amyloidogenic behavior of polysaccharides has been so far reported. Here, we investigate the potential of amylum (starch) not only to self-assemble into hierarchical fibrillar structures but also to exhibit canonical amyloidogenic properties. Ordered amylum structures were formed through a sigmoidal growth process with characteristic amyloid features including typical nanofibril morphology, binding to indicative dyes, inherent luminescence, apple-green birefringence upon Congo red staining, and notable mechanical rigidity. These findings shed light on polysaccharide self-assembly and expand the generic amyloid phenomenon.
Collapse
Affiliation(s)
- Sonika Chibh
- The Shmunis School of Biomedicine and Cancer Research, George S. Wise Faculty of Life Sciences, Tel Aviv University, Tel Aviv 6997801, Israel
| | - Ashmeet Singh
- Center for Biotechnology and Interdisciplinary Studies (CBIS), Rensselaer Polytechnic Institute, Troy, NY 12180, USA
| | - Gal Finkelstein-Zuta
- The Shmunis School of Biomedicine and Cancer Research, George S. Wise Faculty of Life Sciences, Tel Aviv University, Tel Aviv 6997801, Israel
- Department of Materials Science and Engineering, Iby and Aladar Fleischman Faculty of Engineering, Tel Aviv University, Tel Aviv 6997801, Israel
| | - Gil Koren
- The Raymond & Beverly Sackler School of Physics and Astronomy, The Center for Nanoscience and Nanotechnology, and the Center for Physics and Chemistry of Living Systems, Tel Aviv University, Tel Aviv 69978, Israel
| | - Raya Sorkin
- School of Chemistry, Raymond & Beverly Sackler Faculty of Exact Sciences, Tel Aviv University; Tel Aviv, 6997801, Israel
- Center of Physics and Chemistry of Living Systems, Tel Aviv University; Tel Aviv, 6997801, Israel
| | - Roy Beck
- The Raymond & Beverly Sackler School of Physics and Astronomy, The Center for Nanoscience and Nanotechnology, and the Center for Physics and Chemistry of Living Systems, Tel Aviv University, Tel Aviv 69978, Israel
| | - Sigal Rencus-Lazar
- The Shmunis School of Biomedicine and Cancer Research, George S. Wise Faculty of Life Sciences, Tel Aviv University, Tel Aviv 6997801, Israel
| | - Ehud Gazit
- The Shmunis School of Biomedicine and Cancer Research, George S. Wise Faculty of Life Sciences, Tel Aviv University, Tel Aviv 6997801, Israel
- Department of Materials Science and Engineering, Iby and Aladar Fleischman Faculty of Engineering, Tel Aviv University, Tel Aviv 6997801, Israel
| |
Collapse
|
8
|
Hao LT, Kim S, Lee M, Park SB, Koo JM, Jeon H, Park J, Oh DX. Next-generation all-organic composites: A sustainable successor to organic-inorganic hybrid materials. Int J Biol Macromol 2024; 269:132129. [PMID: 38718994 DOI: 10.1016/j.ijbiomac.2024.132129] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/17/2023] [Revised: 04/16/2024] [Accepted: 05/05/2024] [Indexed: 05/30/2024]
Abstract
This Review presents an overview of all-organic nanocomposites, a sustainable alternative to organic-inorganic hybrids. All-organic nanocomposites contain nanocellulose, nanochitin, and aramid nanofibers as highly rigid reinforcing fillers. They offer superior mechanical properties and lightweight characteristics suitable for diverse applications. The Review discusses various methods for preparing the organic nanofillers, including top-down and bottom-up approaches. It highlights in situ polymerization as the preferred method for incorporating these nanomaterials into polymer matrices to achieve homogeneous filler dispersion, a crucial factor for realizing desired performance. Furthermore, the Review explores several applications of all-organic nanocomposites in diverse fields including food packaging, performance-advantaged plastics, and electronic materials. Future research directions-developing sustainable production methods, expanding biomedical applications, and enhancing resistance against heat, chemicals, and radiation of all-organic nanocomposites to permit their use in extreme environments-are explored. This Review offers insights into the potential of all-organic nanocomposites to drive sustainable growth while meeting the demand for high-performance materials across various industries.
Collapse
Affiliation(s)
- Lam Tan Hao
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea
| | - Semin Kim
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea
| | - Minkyung Lee
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea
| | - Sung Bae Park
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea
| | - Jun Mo Koo
- Department of Organic Materials Engineering, Chungnam National University, Daejeon 34134, Republic of Korea
| | - Hyeonyeol Jeon
- Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44429, Republic of Korea; Advanced Materials & Chemical Engineering, Korea National University of Science and Technology (UST), Daejeon 34113, Republic of Korea.
| | - Jeyoung Park
- Department of Chemical and Biomolecular Engineering, Sogang University, Seoul 04107, Republic of Korea.
| | - Dongyeop X Oh
- Department of Polymer Science and Engineering and Program in Environmental and Polymer Engineering, Inha University, Incheon 22212, Republic of Korea.
| |
Collapse
|
9
|
Charlton-Sevcik AK, Collom C, Liu JY, Hsieh YL, Stark N, Ede JD, Shatkin JA, Sayes CM. The impact of surface functionalization of cellulose following simulated digestion and gastrointestinal cell-based model exposure. Int J Biol Macromol 2024; 271:132603. [PMID: 38788877 DOI: 10.1016/j.ijbiomac.2024.132603] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/16/2024] [Revised: 05/16/2024] [Accepted: 05/21/2024] [Indexed: 05/26/2024]
Abstract
Surface-functionalized cellulose materials are developed for various purposes, including food additives and food contact materials. A new biologically relevant testing strategy has been developed based on guidance from the European Food Safety Authority to demonstrate the safety of several next-generation surface-functionalized cellulose materials. This strategy involves a complex three-stage simulated digestion to compare the health effects of thirteen novel different types of cellulose. The physical and chemical properties of surface-functionalized fibrillated celluloses differed depending on the type, amount, and location of functional groups such as sulfonate, TEMPO-oxidized carboxy, and periodate-chlorite oxidized dicarboxylic acid celluloses. Despite exposure to gastrointestinal fluids, the celluloses maintained their physicochemical properties, such as negative surface charges and high length-to-width/thickness aspect ratios. An established intestinal co-culture model was used to measure cytotoxicity, barrier integrity, oxidative stress, and pro-inflammatory response to create a toxicological profile for these unique materials. We conclude that the C6 carboxylated cellulose nanofibrils by TEMPO-oxidation induced the most toxicity in the biological model used in this study and that the observed effects were most prominent at the 4-hour post-exposure time point.
Collapse
Affiliation(s)
- Amanda K Charlton-Sevcik
- Department of Environmental Science, Baylor University, One Bear Place #97266, Waco, TX 76798-7266, USA
| | - Clancy Collom
- Department of Environmental Science, Baylor University, One Bear Place #97266, Waco, TX 76798-7266, USA
| | - James Y Liu
- Department of Environmental Science, Baylor University, One Bear Place #97266, Waco, TX 76798-7266, USA
| | | | | | - James D Ede
- Vireo Advisors, LLC, Boston, MA 02130-4323, USA
| | | | - Christie M Sayes
- Department of Environmental Science, Baylor University, One Bear Place #97266, Waco, TX 76798-7266, USA.
| |
Collapse
|
10
|
Sun J, Dai L, Lv K, Wen Z, Li Y, Yang D, Yan H, Liu X, Liu C, Li MC. Recent advances in nanomaterial-stabilized pickering foam: Mechanism, classification, properties, and applications. Adv Colloid Interface Sci 2024; 328:103177. [PMID: 38759448 DOI: 10.1016/j.cis.2024.103177] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2023] [Revised: 04/07/2024] [Accepted: 05/03/2024] [Indexed: 05/19/2024]
Abstract
Pickering foam is a type of foam stabilized by solid particles known as Pickering stabilizers. These solid stabilizers adsorb at the liquid-gas interface, providing superior stability to the foam. Because of its high stability, controllability, versatility, and minimal environmental impact, nanomaterial-stabilized Pickering foam has opened up new possibilities and development prospects for foam applications. This review provides an overview of the current state of development of Pickering foam stabilized by a wide range of nanomaterials, including cellulose nanomaterials, chitin nanomaterials, silica nanoparticles, protein nanoparticles, clay mineral, carbon nanotubes, calcium carbonate nanoparticles, MXene, and graphene oxide nanosheets. Particularly, the preparation and surface modification methods of various nanoparticles, the fundamental properties of nanomaterial-stabilized Pickering foam, and the synergistic effects between nanoparticles and surfactants, functional polymers, and other additives are systematically introduced. In addition, the latest progress in the application of nanomaterial-stabilized Pickering foam in the oil industry, food industry, porous functional material, and foam flotation field is highlighted. Finally, the future prospects of nanomaterial-stabilized Pickering foam in different fields, along with directions for further research and development directions, are outlined.
Collapse
Affiliation(s)
- Jinsheng Sun
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China; Key Laboratory of Unconventional Oil & Gas Development (China University of Petroleum (East China)), Ministry of Education, Qingdao, Shandong 266580, China
| | - Liyao Dai
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Kaihe Lv
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China; Key Laboratory of Unconventional Oil & Gas Development (China University of Petroleum (East China)), Ministry of Education, Qingdao, Shandong 266580, China
| | - Zhibo Wen
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Yecheng Li
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Dongqing Yang
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Hao Yan
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
| | - Xinyue Liu
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Chaozheng Liu
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Mei-Chun Li
- School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China; Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China; Key Laboratory of Unconventional Oil & Gas Development (China University of Petroleum (East China)), Ministry of Education, Qingdao, Shandong 266580, China.
| |
Collapse
|
11
|
Palanisamy S, Selvaraju GD, Selvakesavan RK, Venkatachalam S, Bharathi D, Lee J. Unlocking sustainable solutions: Nanocellulose innovations for enhancing the shelf life of fruits and vegetables - A comprehensive review. Int J Biol Macromol 2024; 261:129592. [PMID: 38272412 DOI: 10.1016/j.ijbiomac.2024.129592] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2023] [Revised: 01/11/2024] [Accepted: 01/17/2024] [Indexed: 01/27/2024]
Abstract
Regarding food security and waste reduction, preserving fruits and vegetables is a vital problem. This comprehensive study examines the innovative potential of coatings and packaging made of nanocellulose to extend the shelf life of perishable foods. The distinctive merits of nanocellulose, which is prepared from renewable sources, include exceptional gas barrier performance, moisture retention, and antibacterial activity. As a result of these merits, it is a good option for reducing food spoilage factors such as oxidation, desiccation, and microbiological contamination. Nanocellulose not only enhances food preservation but also complies with industry-wide environmental objectives. This review explores the many facets of nanocellulose technology, from its essential characteristics to its use in the preservation of fruits and vegetables. Furthermore, it deals with vital issues including scalability, cost-effectiveness, and regulatory constraints. While the use of nanocellulose in food preservation offers fascinating potential, it also wants to be cautiously careful to assure affordability, effectiveness, and safety. To fully use the potential of nanocellulose and advance the sustainability plan in the food business, collaboration between scientists, regulatory bodies, and industry stakeholders is important as we stand on the cusp of a revolutionary era in food preservation.
Collapse
Affiliation(s)
- Senthilkumar Palanisamy
- School of Biotechnology, Dr. G R Damodaran College of Science, Coimbatore, Tamilnadu, India.
| | - Gayathri Devi Selvaraju
- Department of Biotechnology, KIT - Kalaignarkarunanidhi Institute of Technology, Coimbatore, Tamil Nadu, India
| | | | | | - Devaraj Bharathi
- School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea.
| | - Jintae Lee
- School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea
| |
Collapse
|
12
|
Shi Y, Geng L, Fan P, Yuan Y, Zhao J, Zhang Y. Mechanical properties and physicochemical characteristics of cotton fibers during combing process. Int J Biol Macromol 2024; 261:129791. [PMID: 38325253 DOI: 10.1016/j.ijbiomac.2024.129791] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/07/2023] [Revised: 01/17/2024] [Accepted: 01/25/2024] [Indexed: 02/09/2024]
Abstract
This study employs a combination of experiments and molecular dynamics to analyze the mechanical properties and surface damage characteristics of cotton fibers during the combing process. Additionally, it investigates the alterations in physical and chemical properties at the atomic scale resulting from mechanical damage. Raw cotton (RC) is combed to 1st combed cotton (1st CC), 2nd combed cotton (2nd CC) and 3rd combed cotton (3rd CC). It was found that the mechanical properties and crystallinity showed an increasing and then decreasing trend with the process of combing, and the degree of surface tearing increased, and the binding energy of C and O shifted to a lower position. The breaking strength of cotton fibers first increased by 7.4 % and then decreased by 11 % and 7.7 % respectively, and the crystallinity was CrI (RC) = 70.8 %, CrI (1st CC) = 75.3 %, CrI (2nd CC) = 72.7 %, and CrI (3rd CC) = 71.8 % respectively. The C-O bond and the C-C bond at the amorphous regions are broken after combing lead to the cellulose chain to break, resulting in a decrease in the breaking strength of the fibers. The C-O bond as well as the C-O-C bond angles changes significantly during stretching, and the increase in ordering of the amorphous regions causes an increase in crystallinity.
Collapse
Affiliation(s)
- Yuhua Shi
- Collage of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang 843300, China; Modern Agricultural Engineering Key Laboratory at Universities of Education Department of Xinjiang Uygur Autonomous Region, Alar, Xinjiang 843300, China
| | - Liuyuan Geng
- Collage of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang 843300, China; Modern Agricultural Engineering Key Laboratory at Universities of Education Department of Xinjiang Uygur Autonomous Region, Alar, Xinjiang 843300, China
| | - Pengwei Fan
- Collage of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang 843300, China; Modern Agricultural Engineering Key Laboratory at Universities of Education Department of Xinjiang Uygur Autonomous Region, Alar, Xinjiang 843300, China
| | - Yang Yuan
- Collage of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang 843300, China; Modern Agricultural Engineering Key Laboratory at Universities of Education Department of Xinjiang Uygur Autonomous Region, Alar, Xinjiang 843300, China
| | - Jun Zhao
- Collage of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang 843300, China; Modern Agricultural Engineering Key Laboratory at Universities of Education Department of Xinjiang Uygur Autonomous Region, Alar, Xinjiang 843300, China
| | - Youqiang Zhang
- Collage of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang 843300, China; Modern Agricultural Engineering Key Laboratory at Universities of Education Department of Xinjiang Uygur Autonomous Region, Alar, Xinjiang 843300, China.
| |
Collapse
|
13
|
Sarangi PK, Srivastava RK, Sahoo UK, Singh AK, Parikh J, Bansod S, Parsai G, Luqman M, Shadangi KP, Diwan D, Lanterbecq D, Sharma M. Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste. CHEMOSPHERE 2024; 349:140833. [PMID: 38043620 DOI: 10.1016/j.chemosphere.2023.140833] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/26/2023] [Revised: 11/17/2023] [Accepted: 11/26/2023] [Indexed: 12/05/2023]
Abstract
New materials' synthesis and utilization have shown many critical challenges in healthcare and other industrial sectors as most of these materials are directly or indirectly developed from fossil fuel resources. Environmental regulations and sustainability concepts have promoted the use of natural compounds with unique structures and properties that can be biodegradable, biocompatible, and eco-friendly. In this context, nanocellulose (NC) utility in different sectors and industries is reported due to their unique properties including biocompatibility and antimicrobial characteristics. The bacterial nanocellulose (BNC)-based materials have been synthesized by bacterial cells and extracted from plant waste materials including pineapple plant waste biomass. These materials have been utilized in the form of nanofibers and nanocrystals. These materials are found to have excellent surface properties, low density, and good transparency, and are rich in hydroxyl groups for their modifications to other useful products. These materials are well utilized in different sectors including biomedical or health care centres, nanocomposite materials, supercapacitors, and polymer matrix production. This review explores different approaches for NC production from pineapple waste residues using biotechnological interventions, approaches for their modification, and wider applications in different sectors. Recent technological developments in NC production by enzymatic treatment are critically discussed. The utilization of pineapple waste-derived NC from a bioeconomic perspective is summarized in the paper. The chemical composition and properties of nanocellulose extracted from pineapple waste may have unique characteristics compared to other sources. Pineapple waste for nanocellulose production aligns with the principles of sustainability, waste reduction, and innovation, making it a promising and novel approach in the field of nanocellulose materials.
Collapse
Affiliation(s)
- Prakash Kumar Sarangi
- College of Agriculture, Central Agricultural University, Imphal, 795004, Manipur, India
| | - Rajesh Kumar Srivastava
- Department of Biotechnology, GIT, Gandhi Institute of Technology and Management (GITAM), Visakhapatnam, 530045, India
| | | | - Akhilesh Kumar Singh
- Department of Biotechnology, Mahatma Gandhi Central University, Motihari, 845401, India
| | - Jigisha Parikh
- Department of Chemical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, 395007, Gujarat, India
| | - Shama Bansod
- Department of Chemical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, 395007, Gujarat, India
| | - Ganesh Parsai
- Department of Chemical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, 395007, Gujarat, India
| | - Mohammad Luqman
- Chemical Engineering Department, College of Engineering, Taibah University, Yanbu Al-Bahr-83, Al-Bandar District 41911, Kingdom of Saudi Arabia
| | - Krushna Prasad Shadangi
- Department of Chemical Engineering, Veer Surendra Sai University of Technology, Burla, Sambalpur, Odisha, 768018, India
| | - Deepti Diwan
- Washington University, School of Medicine, Saint Louis, MO, USA
| | - Deborah Lanterbecq
- Laboratoire de Biotechnologie et Biologie Appliquée, CARAH ASBL, Rue Paul Pastur, 11, Ath, 7800, Belgium
| | - Minaxi Sharma
- Laboratoire de Biotechnologie et Biologie Appliquée, CARAH ASBL, Rue Paul Pastur, 11, Ath, 7800, Belgium.
| |
Collapse
|
14
|
Garcia KR, Beck RCR, Brandalise RN, dos Santos V, Koester LS. Nanocellulose, the Green Biopolymer Trending in Pharmaceuticals: A Patent Review. Pharmaceutics 2024; 16:145. [PMID: 38276515 PMCID: PMC10819157 DOI: 10.3390/pharmaceutics16010145] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/23/2023] [Revised: 01/17/2024] [Accepted: 01/18/2024] [Indexed: 01/27/2024] Open
Abstract
The use of nanocellulose in pharmaceutics is a trend that has emerged in recent years. Its inherently good mechanical properties, compared to different materials, such as its high tensile strength, high elastic modulus and high porosity, as well as its renewability and biodegradability are driving nanocellulose's industrial use and innovations. In this sense, this study aims to conduct a search of patents from 2011 to 2023, involving applications of nanocellulose in pharmaceuticals. A patent search was carried out, employing three different patent databases: Patentscope from World Intellectual Property Organization (WIPO); Espacenet; and LENS.ORG. Patents were separated into two main groups, (i) nanocellulose (NC) comprising all its variations and (ii) bacterial nanocellulose (BNC), and classified into five major areas, according to their application. A total of 215 documents was retrieved, of which 179 were referred to the NC group and 36 to the BNC group. The NC group depicted 49.7%, 15.6%, 16.2%, 8.9% and 9.5% of patents as belonging to design and manufacturing, cell culture systems, drug delivery, wound healing and tissue engineering clusters, respectively. The BNC group classified 44.5% of patents as design and manufacturing and 30.6% as drug delivery, as well as 5.6% and 19.4% of patents as wound healing and tissue engineering, respectively. In conclusion, this work compiled and classified patents addressing exclusively the use of nanocellulose in pharmaceuticals, providing information on its current status and trending advancements, considering environmental responsibility and sustainability in materials and products development for a greener upcoming future.
Collapse
Affiliation(s)
- Keth Ribeiro Garcia
- Programa de Pós-Graduação em Ciências Farmacêuticas, Faculdade de Farmácia, Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre 90610-000, Brazil; (K.R.G.); (R.C.R.B.)
| | - Ruy Carlos Ruver Beck
- Programa de Pós-Graduação em Ciências Farmacêuticas, Faculdade de Farmácia, Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre 90610-000, Brazil; (K.R.G.); (R.C.R.B.)
| | - Rosmary Nichele Brandalise
- Programa de Pós-Graduação em Engenharia de Processos e Tecnologias, Universidade de Caxias do Sul (UCS), Caxias do Sul 95070-560, Brazil; (R.N.B.); (V.d.S.)
| | - Venina dos Santos
- Programa de Pós-Graduação em Engenharia de Processos e Tecnologias, Universidade de Caxias do Sul (UCS), Caxias do Sul 95070-560, Brazil; (R.N.B.); (V.d.S.)
| | - Letícia Scherer Koester
- Programa de Pós-Graduação em Ciências Farmacêuticas, Faculdade de Farmácia, Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre 90610-000, Brazil; (K.R.G.); (R.C.R.B.)
| |
Collapse
|
15
|
Pirozzi A, Rincón E, Espinosa E, Donsì F, Serrano L. Nanostructured Cellulose-Based Aerogels: Influence of Chemical/Mechanical Cascade Processes on Quality Index for Benchmarking Dye Pollutant Adsorbents in Wastewater Treatment. Gels 2023; 9:958. [PMID: 38131944 PMCID: PMC10742814 DOI: 10.3390/gels9120958] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/10/2023] [Revised: 12/01/2023] [Accepted: 12/05/2023] [Indexed: 12/23/2023] Open
Abstract
(1) Background: Nanostructured cellulose has emerged as an efficient bio-adsorbent aerogel material, offering biocompatibility and renewable sourcing advantages. This study focuses on isolating (ligno)cellulose nanofibers ((L)CNFs) from barley straw and producing aerogels to develop sustainable and highly efficient decontamination systems. (2) Methods: (Ligno)cellulose pulp has been isolated from barley straw through a pulping process, and was subsequently deconstructed into nanofibers employing various pre-treatment methods (TEMPO-mediated oxidation process or PFI beater mechanical treatment) followed by the high-pressure homogenization (HPH) process. (3) Results: The aerogels made by (L)CNFs, with a higher crystallinity degree, larger aspect ratio, lower shrinkage rate, and higher Young's modulus than cellulose aerogels, successfully adsorb and remove organic dye pollutants from wastewater. (L)CNF-based aerogels, with a quality index (determined using four characterization parameters) above 70%, exhibited outstanding contaminant removal capacity over 80%. The high specific surface area of nanocellulose isolated using the TEMPO oxidation process significantly enhanced the affinity and interactions between hydroxyl and carboxyl groups of nanofibers and cationic groups of contaminants. The efficacy in adsorbing cationic dyes in wastewater onto the aerogels was verified by the Langmuir adsorption isotherm model. (4) Conclusions: This study offers insights into designing and applying advanced (L)CNF-based aerogels as efficient wastewater decontamination and environmental remediation platforms.
Collapse
Affiliation(s)
- Annachiara Pirozzi
- Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy;
| | - Esther Rincón
- BioPrEn Group (RNM 940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, 14014 Córdoba, Spain; (E.R.); (E.E.)
| | - Eduardo Espinosa
- BioPrEn Group (RNM 940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, 14014 Córdoba, Spain; (E.R.); (E.E.)
| | - Francesco Donsì
- Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy;
| | - Luis Serrano
- BioPrEn Group (RNM 940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, 14014 Córdoba, Spain; (E.R.); (E.E.)
| |
Collapse
|
16
|
Bahsaine K, El Allaoui B, Benzeid H, El Achaby M, Zari N, Qaiss AEK, Bouhfid R. Hemp cellulose nanocrystals for functional chitosan/polyvinyl alcohol-based films for food packaging applications. RSC Adv 2023; 13:33294-33304. [PMID: 37964908 PMCID: PMC10641453 DOI: 10.1039/d3ra06586c] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2023] [Accepted: 11/07/2023] [Indexed: 11/16/2023] Open
Abstract
Hemp is known for its swift growth and remarkable sustainability, requiring significantly less water, an adaptable cultivation to a wide range of climates when compared to other fibers sources, making it a practical and environmentally friendly choice for packaging materials. The current research seeks to extract cellulose nanocrystals (CNCs) from hemp fibers using alkali treatment followed by acid hydrolysis and assess their reinforcing capacity in polyvinyl alcohol (PVA) and chitosan (CS) films. AFM analysis confirmed the existence of elongated, uniquely nanosized CNC fibers. The length of the isolated CNCs was approximately 277.76 ± 61 nm, diameter was 6.38 ± 1.27 nm and its aspect ratio was 44.69 ± 11.08. The FTIR and SEM analysis indicated the successful removal of non-cellulosic compounds. Furthermore, the study explored the impact of adding CNCs at varying weight percentages (0, 0.5, 1, 2.5, and 5 wt%) as a strengthening agent on the chemical composition, structure, tensile characteristics, transparency, and water solubility of the bionanocomposite films. Adding CNCs to the CS/PVA film, up to 5 wt%, resulted in an improvement in both the Young's modulus and tensile strength of the bionanocomposite film, which are measured at (412.46 ± 10.49 MPa) and (18.60 ± 3.42 MPa), respectively, in contrast to the control films with values of (202.32 ± 22.50 MPa) and (13.72 ± 2.61 MPa), respectively. The scanning electron microscopy (SEM) images reveal the creation of a CS/PVA/CNC film that appears smooth, with no signs of clumping or clustering. The blending and introduction of CNCs have yielded transparent and biodegradable CS/PVA films. This incorporation has led to a reduction in the gas transmission rate (from 7.013 to 4.159 cm3 (m2 day·0.1 MPa))-1, a decrease in transparency (from 90.23% to 82.47%), and a lowered water solubility (from 48% to 33%). This study is the inaugural effort to propose the utilization of hemp-derived CNC as a strengthening component in the development of mechanically robust and transparent CS/PVA-CNC bio-nanocomposite films, holding substantial potential for application in the field of food packaging.
Collapse
Affiliation(s)
- Kenza Bahsaine
- Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Composites and Nanocomposites Center, Rabat Design Center Rue Mohamed El Jazouli, Madinat El Irfane 10100 Rabat Morocco
- Laboratoire de Chimie Analytique, Faculté de Médecine et de Pharmacie, Université Mohammed V de Rabat Rabat Morocco
| | - Brahim El Allaoui
- Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Composites and Nanocomposites Center, Rabat Design Center Rue Mohamed El Jazouli, Madinat El Irfane 10100 Rabat Morocco
- Laboratoire de Chimie Analytique, Faculté de Médecine et de Pharmacie, Université Mohammed V de Rabat Rabat Morocco
| | - Hanane Benzeid
- Laboratoire de Chimie Analytique, Faculté de Médecine et de Pharmacie, Université Mohammed V de Rabat Rabat Morocco
| | - Mounir El Achaby
- Materials Science and Nanoengineering Department (MSN), Mohammed VI Polytechnic University (UM6P) Lot 660 - Hay Moulay Rachid, 43150, Ben Guerir Morocco
| | - Nadia Zari
- Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Composites and Nanocomposites Center, Rabat Design Center Rue Mohamed El Jazouli, Madinat El Irfane 10100 Rabat Morocco
- Mohammed VI Polytechnic University Lot 660 - Hay Moulay Rachid, 43150 Ben Guerir Morocco
| | - Abou El Kacem Qaiss
- Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Composites and Nanocomposites Center, Rabat Design Center Rue Mohamed El Jazouli, Madinat El Irfane 10100 Rabat Morocco
- Mohammed VI Polytechnic University Lot 660 - Hay Moulay Rachid, 43150 Ben Guerir Morocco
| | - Rachid Bouhfid
- Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Composites and Nanocomposites Center, Rabat Design Center Rue Mohamed El Jazouli, Madinat El Irfane 10100 Rabat Morocco
- Mohammed VI Polytechnic University Lot 660 - Hay Moulay Rachid, 43150 Ben Guerir Morocco
| |
Collapse
|
17
|
Tlou S, Suter E, Alfred M, Rutto H, Omwoyo W. In situ capping of silver nanoparticles with cellulosic matrices from wheat straws in enhancing their antimicrobial activity: Synthesis and characterization. JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH. PART A, TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING 2023; 58:903-913. [PMID: 37735931 DOI: 10.1080/10934529.2023.2260295] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/10/2023] [Accepted: 09/06/2023] [Indexed: 09/23/2023]
Abstract
Silver nanoparticles have gained worldwide attention in the scientific community due to their high antimicrobial activity. However, they tend to agglomerate and lose their shape and properties, thus capping agents necessary to protect their shapes, sizes, and properties. To enhance their antimicrobial activity, this research aimed to cap silver nanoparticles with cellulosic matrices from wheat straws. The wheat straw was delignified with 6% HNO3, and the residual was treated with 1% NaOH and NaClO: CH3COOH (1:1), then used to synthesize cellulose nanocrystals via acid hydrolysis. AgNPs were incorporated into the CPC and CNCs by in-situ synthesis using NaHB4 as the reducing agent. Fourier Transform Infrared, Scanning Electron Microscopy, and X-ray diffraction were used to investigate their features. The findings exhibited crystallinity increased with subsequent treatments, according to XRD analysis. Ultraviolet-visible, FTIR, TEM, and XRD analysis confirmed the capping of AgNPs onto the cellulosic materials. Antibacterial activity against Staphylococcus aureus and Escherichia coli, with CNCs-AgNPs composite, exhibited higher activity compared to CPC-AgNPs composite due to the increased surface area and excellent binding on the surface of the composite.
Collapse
Affiliation(s)
- Shappo Tlou
- Department of Chemistry, Vaal University of Technology, Vanderbijlpark, South Africa
| | - Evans Suter
- Department of Chemical Engineering, Vaal University of Technology, Vanderbijlpark, South Africa
| | - Mitema Alfred
- Department of Biotechnology, Vaal University of Technology, Vanderbijlpark, South Africa
| | - Hilary Rutto
- Department of Chemical Engineering, Vaal University of Technology, Vanderbijlpark, South Africa
| | - Wesley Omwoyo
- Department of Chemistry, Vaal University of Technology, Vanderbijlpark, South Africa
| |
Collapse
|
18
|
Pacheco A, Evangelista-Osorio A, Muchaypiña-Flores KG, Marzano-Barreda LA, Paredes-Concepción P, Palacin-Baldeón H, Dos Santos MSN, Tres MV, Zabot GL, Olivera-Montenegro L. Polymeric Materials Obtained by Extrusion and Injection Molding from Lignocellulosic Agroindustrial Biomass. Polymers (Basel) 2023; 15:4046. [PMID: 37896290 PMCID: PMC10610583 DOI: 10.3390/polym15204046] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/21/2023] [Revised: 10/03/2023] [Accepted: 10/03/2023] [Indexed: 10/29/2023] Open
Abstract
This review presents the advances in polymeric materials achieved by extrusion and injection molding from lignocellulosic agroindustrial biomass. Biomass, which is derived from agricultural and industrial waste, is a renewable and abundant feedstock that contains mainly cellulose, hemicellulose, and lignin. To improve the properties and functions of polymeric materials, cellulose is subjected to a variety of modifications. The most common modifications are surface modification, grafting, chemical procedures, and molecule chemical grafting. Injection molding and extrusion technologies are crucial in shaping and manufacturing polymer composites, with precise control over the process and material selection. Furthermore, injection molding involves four phases: plasticization, injection, cooling, and ejection, with a focus on energy efficiency. Fundamental aspects of an injection molding machine, such as the motor, hopper, heating units, nozzle, and clamping unit, are discussed. Extrusion technology, commonly used as a preliminary step to injection molding, presents challenges regarding fiber reinforcement and stress accumulation, while lignin-based polymeric materials are challenging due to their hydrophobicity. The diverse applications of these biodegradable materials include automotive industries, construction, food packaging, and various consumer goods. Polymeric materials are positioned to offer even bigger contributions to sustainable and eco-friendly solutions in the future, as research and development continues.
Collapse
Affiliation(s)
- Ada Pacheco
- Bioprocesses and Biomass Conversion Research Group, Universidad San Ignacio de Loyola, La Molina 15024, Peru; (A.P.); (A.E.-O.); (K.G.M.-F.); (L.A.M.-B.); (H.P.-B.)
| | - Arian Evangelista-Osorio
- Bioprocesses and Biomass Conversion Research Group, Universidad San Ignacio de Loyola, La Molina 15024, Peru; (A.P.); (A.E.-O.); (K.G.M.-F.); (L.A.M.-B.); (H.P.-B.)
| | - Katherine Gabriela Muchaypiña-Flores
- Bioprocesses and Biomass Conversion Research Group, Universidad San Ignacio de Loyola, La Molina 15024, Peru; (A.P.); (A.E.-O.); (K.G.M.-F.); (L.A.M.-B.); (H.P.-B.)
| | - Luis Alejandro Marzano-Barreda
- Bioprocesses and Biomass Conversion Research Group, Universidad San Ignacio de Loyola, La Molina 15024, Peru; (A.P.); (A.E.-O.); (K.G.M.-F.); (L.A.M.-B.); (H.P.-B.)
| | - Perla Paredes-Concepción
- Grupo de Ciencia, Tecnología e Innovación en Alimentos, Universidad San Ignacio de Loyola, La Molina 15024, Peru;
| | - Heidy Palacin-Baldeón
- Bioprocesses and Biomass Conversion Research Group, Universidad San Ignacio de Loyola, La Molina 15024, Peru; (A.P.); (A.E.-O.); (K.G.M.-F.); (L.A.M.-B.); (H.P.-B.)
| | - Maicon Sérgio Nascimento Dos Santos
- Laboratory of Agroindustrial Processes Engineering (LAPE), Federal University of Santa Maria, 1040 Sete de Setembro St., Center DC, Cachoeira do Sul, Santa Maria 96508-010, RS, Brazil; (M.S.N.D.S.); (M.V.T.); (G.L.Z.)
| | - Marcus Vinícius Tres
- Laboratory of Agroindustrial Processes Engineering (LAPE), Federal University of Santa Maria, 1040 Sete de Setembro St., Center DC, Cachoeira do Sul, Santa Maria 96508-010, RS, Brazil; (M.S.N.D.S.); (M.V.T.); (G.L.Z.)
| | - Giovani Leone Zabot
- Laboratory of Agroindustrial Processes Engineering (LAPE), Federal University of Santa Maria, 1040 Sete de Setembro St., Center DC, Cachoeira do Sul, Santa Maria 96508-010, RS, Brazil; (M.S.N.D.S.); (M.V.T.); (G.L.Z.)
| | - Luis Olivera-Montenegro
- Bioprocesses and Biomass Conversion Research Group, Universidad San Ignacio de Loyola, La Molina 15024, Peru; (A.P.); (A.E.-O.); (K.G.M.-F.); (L.A.M.-B.); (H.P.-B.)
- Grupo de Ciencia, Tecnología e Innovación en Alimentos, Universidad San Ignacio de Loyola, La Molina 15024, Peru;
| |
Collapse
|
19
|
Leong MY, Kong YL, Harun MY, Looi CY, Wong WF. Current advances of nanocellulose application in biomedical field. Carbohydr Res 2023; 532:108899. [PMID: 37478689 DOI: 10.1016/j.carres.2023.108899] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2022] [Revised: 07/10/2023] [Accepted: 07/11/2023] [Indexed: 07/23/2023]
Abstract
Nanocellulose (NC) is a natural fiber that can be extracted in fibrils or crystals form from different natural sources, including plants, bacteria, and algae. In recent years, nanocellulose has emerged as a sustainable biomaterial for various medicinal applications including drug delivery systems, wound healing, tissue engineering, and antimicrobial treatment due to its biocompatibility, low cytotoxicity, and exceptional water holding capacity for cell immobilization. Many antimicrobial products can be produced due to the chemical functionality of nanocellulose, such disposable antibacterial smart masks for healthcare use. This article discusses comprehensively three types of nanocellulose: cellulose nanocrystals (CNC), cellulose nanofibrils (CNF), and bacterial nanocellulose (BNC) in view of their structural and functional properties, extraction methods, and the distinctive biomedical applications based on the recently published work. On top of that, the biosafety profile and the future perspectives of nanocellulose-based biomaterials have been further discussed in this review.
Collapse
Affiliation(s)
- M Y Leong
- School of Biosciences, Faculty of Health and Medical Sciences, Taylor's University Lakeside Campus, 47500, Subang Jaya, Selangor Darul Ehsan, Malaysia
| | - Y L Kong
- Department of Engineering and Applied Sciences, American Degree Program, Taylor's University Lakeside Campus, 47500, Subang Jaya, Selangor Darul Ehsan, Malaysia.
| | - M Y Harun
- Department of Chemical and Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400, UPM Serdang, Selangor Darul Ehsan, Malaysia
| | - C Y Looi
- School of Biosciences, Faculty of Health and Medical Sciences, Taylor's University Lakeside Campus, 47500, Subang Jaya, Selangor Darul Ehsan, Malaysia
| | - W F Wong
- Department of Medical Microbiology, Faculty of Medicine, Universiti Malaya, 50603, Kuala Lumpur, Malaysia
| |
Collapse
|
20
|
Sharma N, Allardyce BJ, Rajkhowa R, Agrawal R. Rice straw-derived cellulose: a comparative study of various pre-treatment technologies and its conversion to nanofibres. Sci Rep 2023; 13:16327. [PMID: 37770522 PMCID: PMC10539515 DOI: 10.1038/s41598-023-43535-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/15/2023] [Accepted: 09/25/2023] [Indexed: 09/30/2023] Open
Abstract
Rice straw is a waste product generated after the harvesting of rice crops and is commonly disposed of by burning it off in open fields. This study explored the potential for the extraction and conversion of cellulose to cellulose nanofibres (CNFs) to be used as smart delivery systems for fertilizers applications. In this study, alkali, steam explosion, and organosolv treatments were investigated for cellulose extraction efficiency. The morphological characterization of cellulose showed smooth fibrillar structures. Fourier transform infrared spectroscopy represented significant removal of non-cellulosic components in treatments. The crystallinity increased from 52.2 to 65% in CNFs after fibrillation. Cellulose nanofibres (CNFs) had an average diameter of 37.4 nm and - 25.2 mV surface charges as determined by SEM and zeta potential, respectively, which have desired properties for holding fertilizers. Therefore, this study paves the way for value-added uses of rice straw as alternatives to current environmentally harmful practices.
Collapse
Affiliation(s)
- Neha Sharma
- TERI Deakin Nanobiotechnology Centre, TERI Gram, Gual Pahari, Gurugram, India
- Institute for Frontier Materials, Deakin University, Geelong, Australia
| | | | - Rangam Rajkhowa
- Institute for Frontier Materials, Deakin University, Geelong, Australia
| | - Ruchi Agrawal
- TERI Deakin Nanobiotechnology Centre, TERI Gram, Gual Pahari, Gurugram, India.
| |
Collapse
|
21
|
Meng S, Wu H, Xiao D, Lan S, Dong A. Recent advances in bacterial cellulose-based antibacterial composites for infected wound therapy. Carbohydr Polym 2023; 316:121082. [PMID: 37321715 DOI: 10.1016/j.carbpol.2023.121082] [Citation(s) in RCA: 21] [Impact Index Per Article: 21.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2022] [Revised: 05/20/2023] [Accepted: 05/30/2023] [Indexed: 06/17/2023]
Abstract
Wound infection arising from pathogenic bacteria brought serious trouble to the patient and medical system. Among various wound dressings that are effective in killing pathogenic bacteria, antimicrobial composites based on bacterial cellulose (BC) are becoming the most popular materials due to their success in eliminating pathogenic bacteria, preventing wound infection, and promoting wound healing. However, as an extracellular natural polymer, BC is not inherently antimicrobial, which means that it must be combined with other antimicrobials to be effective against pathogens. BC has many advantages over other polymers, including nano-structure, significant moisture retention, non-adhesion to the wound surface, which has made it superior to other biopolymers. This review introduces the recent advances in BC-based composites for the treatment of wound infection, including the classification and preparation methods of composites, the mechanism of wound treatment, and commercial application. Moreover, their wound therapy applications include hydrogel dressing, surgical sutures, wound healing bandages, and patches are summarized in detail. Finally, the challenges and future prospects of BC-based antibacterial composites for the treatment of infected wounds are discussed.
Collapse
Affiliation(s)
- Suriguga Meng
- College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot 010021, China; Engineering Research Center of Dairy Quality and Safety Control Technology, Ministry of Education, Inner Mongolia University, Hohhot 010021, China
| | - Haixia Wu
- College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot 010021, China; Engineering Research Center of Dairy Quality and Safety Control Technology, Ministry of Education, Inner Mongolia University, Hohhot 010021, China
| | - Douxin Xiao
- College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot 010021, China; Engineering Research Center of Dairy Quality and Safety Control Technology, Ministry of Education, Inner Mongolia University, Hohhot 010021, China.
| | - Shi Lan
- College of Science, Inner Mongolia Agricultural University, Hohhot 010018, China.
| | - Alideertu Dong
- College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot 010021, China; Engineering Research Center of Dairy Quality and Safety Control Technology, Ministry of Education, Inner Mongolia University, Hohhot 010021, China.
| |
Collapse
|
22
|
Chibac-Scutaru AL, Coseri S. Advances in the use of cellulose-based proton exchange membranes in fuel cell technology: A review. Int J Biol Macromol 2023; 247:125810. [PMID: 37453630 DOI: 10.1016/j.ijbiomac.2023.125810] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/03/2023] [Revised: 06/11/2023] [Accepted: 07/05/2023] [Indexed: 07/18/2023]
Abstract
Fuel cells are electrochemical, ecologically friendly appliances that transform chemical energy into electricity in a clean, simple, and effective manner. With the advancement of technology in the field of computer science, electronic downsizing, and the ongoing need for mobility, the demand for portable energy sources such as fuel cells has considerably increased. The proton exchange membrane, which is designed to be a good conductor for protons while isolating electrons to move from the anode to the cathode, imprinting them an external circuit, and thus creating electricity, is at the heart of such an energy source. Perfluorosulfonic acid-based (NAFION) membranes, first introduced over 50 years ago, are still the state of the art in the field of fuel cell proton exchange membranes today. However, because of the numerous drawbacks connected with the usage of NAFION membranes, the scientific community has shifted its focus to producing new generation membranes based on natural materials, such as cellulose. Therefore, we believe that a review of the most recent studies on the use of cellulose as a material for proton exchange membranes in fuel cells may be very much appreciated by the scientific community.
Collapse
Affiliation(s)
- Andreea Laura Chibac-Scutaru
- "Petru Poni" Institute of Macromolecular Chemistry of Romanian Academy, 41 A, Gr. Ghica Voda Alley, 700487, Iasi, Romania.
| | - Sergiu Coseri
- "Petru Poni" Institute of Macromolecular Chemistry of Romanian Academy, 41 A, Gr. Ghica Voda Alley, 700487, Iasi, Romania.
| |
Collapse
|
23
|
Bukhari NTM, Rawi NFM, Hassan NAA, Saharudin NI, Kassim MHM. Seaweed polysaccharide nanocomposite films: A review. Int J Biol Macromol 2023; 245:125486. [PMID: 37355060 DOI: 10.1016/j.ijbiomac.2023.125486] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2023] [Revised: 05/29/2023] [Accepted: 06/17/2023] [Indexed: 06/26/2023]
Abstract
A million tonnes of plastic produced each year are disposed of after single use. Biodegradable polymers have become a promising material as an alternative to petroleum-based polymers. Utilising biodegradable polymers will promote environmental sustainability which has emerged with potential features and performances for various applications in different sectors. Seaweed-derived polysaccharides-based composites have been the focus of numerous studies due to the composites' renewability and sustainability for industries (food packaging and medical fields like tissue engineering and drug delivery). Due to their biocompatibility, abundance, and gelling ability, seaweed derivatives such as alginate, carrageenan, and agar are commonly used for this purpose. Seaweed has distinct film-forming characteristics, but its mechanical and water vapour barrier qualities are weak. Thus, modifications are necessary to enhance the seaweed properties. This review article summarises and discusses the effect of incorporating seaweed films with different types of nanoparticles on their mechanical, thermal, and water barrier properties.
Collapse
Affiliation(s)
- Nur Thohiroh Md Bukhari
- Bioresource Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia
| | - Nurul Fazita Mohammad Rawi
- Bioresource Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia; Green Biopolymer, Coatings & Packaging Cluster, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia.
| | - Nur Adilah Abu Hassan
- Bioresource Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia; Green Biopolymer, Coatings & Packaging Cluster, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia
| | - Nur Izzaati Saharudin
- Bioresource Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia; Green Biopolymer, Coatings & Packaging Cluster, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia
| | - Mohamad Haafiz Mohamad Kassim
- Bioresource Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia; Green Biopolymer, Coatings & Packaging Cluster, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia
| |
Collapse
|
24
|
Durmaz E, Sertkaya S, Yilmaz H, Olgun C, Ozcelik O, Tozluoglu A, Candan Z. Lignocellulosic Bionanomaterials for Biosensor Applications. MICROMACHINES 2023; 14:1450. [PMID: 37512761 PMCID: PMC10384395 DOI: 10.3390/mi14071450] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/01/2023] [Revised: 07/14/2023] [Accepted: 07/16/2023] [Indexed: 07/30/2023]
Abstract
The rapid population growth, increasing global energy demand, climate change, and excessive use of fossil fuels have adversely affected environmental management and sustainability. Furthermore, the requirements for a safer ecology and environment have necessitated the use of renewable materials, thereby solving the problem of sustainability of resources. In this perspective, lignocellulosic biomass is an attractive natural resource because of its abundance, renewability, recyclability, and low cost. The ever-increasing developments in nanotechnology have opened up new vistas in sensor fabrication such as biosensor design for electronics, communication, automobile, optical products, packaging, textile, biomedical, and tissue engineering. Due to their outstanding properties such as biodegradability, biocompatibility, non-toxicity, improved electrical and thermal conductivity, high physical and mechanical properties, high surface area and catalytic activity, lignocellulosic bionanomaterials including nanocellulose and nanolignin emerge as very promising raw materials to be used in the development of high-impact biosensors. In this article, the use of lignocellulosic bionanomaterials in biosensor applications is reviewed and major challenges and opportunities are identified.
Collapse
Affiliation(s)
- Ekrem Durmaz
- Department of Forest Industrial Engineering, Kastamonu University, 37200 Kastamonu, Turkey
| | - Selva Sertkaya
- Department of Forest Industrial Engineering, Duzce University, 81620 Duzce, Turkey
| | - Hande Yilmaz
- Department of Forest Industrial Engineering, Duzce University, 81620 Duzce, Turkey
| | - Cagri Olgun
- Department of Forest Industrial Engineering, Kastamonu University, 37200 Kastamonu, Turkey
| | - Orhan Ozcelik
- Department of Aerospace Engineering, Ankara Yildirim Beyazit University, 06010 Ankara, Turkey
| | - Ayhan Tozluoglu
- Department of Forest Industrial Engineering, Duzce University, 81620 Duzce, Turkey
- Biomaterials and Nanotechnology Research Group & BioNanoTeam, 34473 Istanbul, Turkey
| | - Zeki Candan
- Biomaterials and Nanotechnology Research Group & BioNanoTeam, 34473 Istanbul, Turkey
- Department of Forest Industrial Engineering, Istanbul University Cerrahpasa, 34473 Istanbul, Turkey
| |
Collapse
|
25
|
Abdelhamid HN. An introductory review on advanced multifunctional materials. Heliyon 2023; 9:e18060. [PMID: 37496901 PMCID: PMC10366438 DOI: 10.1016/j.heliyon.2023.e18060] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2023] [Revised: 07/04/2023] [Accepted: 07/05/2023] [Indexed: 07/28/2023] Open
Abstract
This review summarizes the applications of some of the advanced materials. It included the synthesis of several nanoparticles such as metal oxide nanoparticles (e.g., Fe3O4, ZnO, ZrOSO4, MoO3-x, CuO, AgFeO2, Co3O4, CeO2, SiO2, and CuFeO2); metal hydroxide nanosheets (e.g., Zn5(OH)8(NO3)2·2H2O, Zn(OH)(NO3)·H2O, and Zn5(OH)8(NO3)2); metallic nanoparticles (Ag, Au, Pd, and Pt); carbon-based nanomaterials (graphene, graphene oxide (GO), graphitic carbon nitride (g-C3N4), and carbon dots (CDs)); biopolymers (cellulose, nanocellulose, TEMPO-oxidized cellulose nanofibers (TOCNFs), and chitosan); organic polymers (e.g. covalent-organic frameworks (COFs)); and hybrid materials (e.g. metal-organic frameworks (MOFs)). Most of these materials were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing, biosensing, cancer therapy, and drug delivery). They can be used as efficient adsorbents and catalysts to remove emerging contaminants e.g., inorganic (i.e., heavy metals) and organic (e.g., dyes, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation reactions such as redox reactions of pollutants. They can be used as filters for air purification by capturing carbon dioxide (CO2) and volatile organic compounds (VOCs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH4. Nanomedicine for some of these materials was also included being an effective agent as an antibacterial, nanocarrier for drug delivery, and probe for biosensing.
Collapse
Affiliation(s)
- Hani Nasser Abdelhamid
- Advanced Multifunctional Materials Laboratory, Chemistry Department-Faculty of Science, Assiut University, Egypt
- Nanotechnology Research Centre (NTRC), The British University in Egypt (BUE), Suez Desert Road, El-Sherouk City, Cairo 11837, Egypt
| |
Collapse
|
26
|
Negro C, Pettersson G, Mattsson A, Nyström S, Sanchez-Salvador JL, Blanco A, Engstrand P. Synergies between Fibrillated Nanocellulose and Hot-Pressing of Papers Obtained from High-Yield Pulp. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:1931. [PMID: 37446447 DOI: 10.3390/nano13131931] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/30/2023] [Revised: 06/20/2023] [Accepted: 06/23/2023] [Indexed: 07/15/2023]
Abstract
To extend the application of cost-effective high-yield pulps in packaging, strength and barrier properties are improved by advanced-strength additives or by hot-pressing. The aim of this study is to assess the synergic effects between the two approaches by using nanocellulose as a bulk additive, and by hot-pressing technology. Due to the synergic effect, dry strength increases by 118% while individual improvements are 31% by nanocellulose and 92% by hot-pressing. This effect is higher for mechanical fibrillated cellulose. After hot-pressing, all papers retain more than 22% of their dry strength. Hot-pressing greatly increases the paper's ability to withstand compressive forces applied in short periods of time by 84%, with a further 30% increase due to the synergic effect of the fibrillated nanocellulose. Hot-pressing and the fibrillated cellulose greatly decrease air permeability (80% and 68%, respectively) for refining pretreated samples, due to the increased fiber flexibility, which increase up to 90% using the combined effect. The tear index increases with the addition of nanocellulose, but this effect is lost after hot-pressing. In general, fibrillation degree has a small effect which means that low- cost nanocellulose could be used in hot-pressed papers, providing products with a good strength and barrier capacity.
Collapse
Affiliation(s)
- Carlos Negro
- Department of Chemical Engineering and Materials, University Complutense of Madrid, Avda Complutense s/n, 28040 Madrid, Spain
| | - Gunilla Pettersson
- Department of Engineering, Mathematics and Science Education (IMD), Mid Sweden University, SE-85170 Sundsvall, Sweden
| | - Amanda Mattsson
- Department of Engineering, Mathematics and Science Education (IMD), Mid Sweden University, SE-85170 Sundsvall, Sweden
| | - Staffan Nyström
- Department of Engineering, Mathematics and Science Education (IMD), Mid Sweden University, SE-85170 Sundsvall, Sweden
| | - Jose Luis Sanchez-Salvador
- Department of Chemical Engineering and Materials, University Complutense of Madrid, Avda Complutense s/n, 28040 Madrid, Spain
| | - Angeles Blanco
- Department of Chemical Engineering and Materials, University Complutense of Madrid, Avda Complutense s/n, 28040 Madrid, Spain
| | - Per Engstrand
- Department of Engineering, Mathematics and Science Education (IMD), Mid Sweden University, SE-85170 Sundsvall, Sweden
| |
Collapse
|
27
|
Carvajal-Barriga EJ, Fitzgerald W, Dimitriadis EK, Margolis L, Fields RD. Sulfated endospermic nanocellulose crystals prevent the transmission of SARS-CoV-2 and HIV-1. Sci Rep 2023; 13:6959. [PMID: 37117231 PMCID: PMC10141831 DOI: 10.1038/s41598-023-33686-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2022] [Accepted: 04/17/2023] [Indexed: 04/30/2023] Open
Abstract
Biomaterials with antimicrobial activity are gaining attention due to their biodegradability and efficacy in interacting with a wide range of microorganisms. A new cellulose nano-biomaterial, endospermic nanocellulose crystals (ENC) obtained from parenchymal tissue of ivory nut endosperm, has a natural capacity as a universal binder. This feature is enhanced when it is chemically functionalized, and can be exploited in the fight against microbes. We tested the ability of sulfated ENC in aqueous suspension to encapsulate viruses through a crosslinking reaction mediated by cations. 0.25% w/v ENC suspensions efficiently encapsulated spike (S) protein, preventing its interaction with ACE2 receptor. ENC was further able to encapsulate SARS-CoV-2 pseudoviruses and prevent infection of 293T-hsACE2 cells. ENC also suppressed infection of MT-4 cells with HIV-1LAI.04. This antiviral activity of sulfated ENC is due to the irreversible interaction of ENC with viral particles mediated by crosslinking, as antiviral activity was less effective in the absence of cations. Additionally, ENC was used as a matrix to immobilize recombinant ACE2 receptors and anti-S IgG, creating molecular lures that efficiently inhibited SARS-CoV-2 infections in vitro. These results show that sulfated ENC from ivory nuts can be used as an efficient antiviral material.
Collapse
Affiliation(s)
- Enrique Javier Carvajal-Barriga
- Nervous System Development and Plasticity Section, Eunice Kennedy Shriver National Institute of Child Health and Human Development, National Institutes of Health, Bethesda, MD, USA
- Neotropical Center for the Biomass Research, Pontificia Universidad Católica del Ecuador, Quito, Pichincha, Ecuador
| | - Wendy Fitzgerald
- Section On Intercellular Interactions, Eunice Kennedy Shriver National Institute of Child Health and Human Development, National Institutes of Health, Bethesda, MD, USA
| | - Emilios K Dimitriadis
- Biomedical Engineering and Physical Science Shared Resource Program, National Institute of Biomedical Imaging and Bioengineering, National Institutes of Health, Bethesda, MD, USA
| | - Leonid Margolis
- Section On Intercellular Interactions, Eunice Kennedy Shriver National Institute of Child Health and Human Development, National Institutes of Health, Bethesda, MD, USA
| | - R Douglas Fields
- Nervous System Development and Plasticity Section, Eunice Kennedy Shriver National Institute of Child Health and Human Development, National Institutes of Health, Bethesda, MD, USA.
| |
Collapse
|
28
|
Wang X, Tarahomi M, Sheibani R, Xia C, Wang W. Progresses in lignin, cellulose, starch, chitosan, chitin, alginate, and gum/carbon nanotube (nano)composites for environmental applications: A review. Int J Biol Macromol 2023; 241:124472. [PMID: 37076069 DOI: 10.1016/j.ijbiomac.2023.124472] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/25/2023] [Revised: 04/04/2023] [Accepted: 04/12/2023] [Indexed: 04/21/2023]
Abstract
Water sources are becoming increasingly scarce, and they are contaminated by industrial, residential, and agricultural waste-derived organic and inorganic contaminants. These contaminants may pollute the air, water, and soil in addition to invading the ecosystem. Because carbon nanotubes (CNTs) can undergo surface modification, they can combine with other substances to create nanocomposites (NCs), including biopolymers, metal nanoparticles, proteins, and metal oxides. Furthermore, biopolymers are significant classes of organic materials that are widely used for various applications. They have drawn attention due to their benefits such as environmental friendliness, availability, biocompatibility, safety, etc. As a result, the synthesis of a composite made of CNT and biopolymers can be very effective for a variety of applications, especially those involving the environment. In this review, we reported environmental applications (including removal of dyes, nitro compounds, hazardous materialsو toxic ions, etc.) of composites made of CNT and biopolymers such as lignin, cellulose, starch, chitosan, chitin, alginate, and gum. Also, the effect of different factors such as the medium pH, the pollutant concentration, temperature, and contact time on the adsorption capacity (AC) and the catalytic activity of the composite in the reduction or degradation of various pollutants has been systematically explained.
Collapse
Affiliation(s)
- Xuan Wang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, Jiangsu 210037, China
| | - Mehrasa Tarahomi
- Amirkabir University of Technology-Mahshahr Campus, University St., Nahiyeh San'ati, Mahshahr, Khouzestan, Iran
| | - Reza Sheibani
- Amirkabir University of Technology-Mahshahr Campus, University St., Nahiyeh San'ati, Mahshahr, Khouzestan, Iran.
| | - Changlei Xia
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, Jiangsu 210037, China.
| | - Weidong Wang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, Jiangsu 210037, China
| |
Collapse
|
29
|
Solhi L, Guccini V, Heise K, Solala I, Niinivaara E, Xu W, Mihhels K, Kröger M, Meng Z, Wohlert J, Tao H, Cranston ED, Kontturi E. Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset. Chem Rev 2023; 123:1925-2015. [PMID: 36724185 PMCID: PMC9999435 DOI: 10.1021/acs.chemrev.2c00611] [Citation(s) in RCA: 53] [Impact Index Per Article: 53.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Abstract
Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.
Collapse
Affiliation(s)
- Laleh Solhi
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Valentina Guccini
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Katja Heise
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Iina Solala
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Elina Niinivaara
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland.,Department of Wood Science, University of British Columbia, Vancouver, British ColumbiaV6T 1Z4, Canada
| | - Wenyang Xu
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland.,Laboratory of Natural Materials Technology, Åbo Akademi University, TurkuFI-20500, Finland
| | - Karl Mihhels
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Marcel Kröger
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Zhuojun Meng
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland.,Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou325001, China
| | - Jakob Wohlert
- Wallenberg Wood Science Centre (WWSC), Department of Fibre and Polymer Technology, School of Engineering Sciences in Chemistry, Biotechnology and Health, KTH Royal Institute of Technology, 10044Stockholm, Sweden
| | - Han Tao
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| | - Emily D Cranston
- Department of Wood Science, University of British Columbia, Vancouver, British ColumbiaV6T 1Z4, Canada.,Department of Chemical and Biological Engineering, University of British Columbia, Vancouver, British ColumbiaV6T 1Z3, Canada
| | - Eero Kontturi
- Department of Bioproducts and Biosystems, Aalto University, EspooFI-00076, Finland
| |
Collapse
|
30
|
Mahmoud SM, Ali SH, Omar MMA. Cationic cellulose nanocrystals as sustainable green material for multi biological applications via ξ potential. JOURNAL OF BIOMATERIALS SCIENCE. POLYMER EDITION 2023:1-25. [PMID: 36752027 DOI: 10.1080/09205063.2023.2177474] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/09/2023]
Abstract
The present study aims to disclose the activity of cationic cellulose nanocrystals (CNCs) as a promising multifunctional green nanomaterial with applications in biological aspects. The basic reason behind multifunctional behavior is zeta potential and size distribution of nano biopolymers; exhibit a remarkable physical and biological activity compared to normal molecules.The preliminary characterized studied using absorption spectral analysis showed strong absorption peak indicating that spectrum curves can be screen by UV spectra at wavelength range 200-400nm. Ultrastructural studies (SEM-EDS and TEM), manifest that CNCs are elliptical particles in shape. Also, TEM show CNCs are the ideal illustration of zero-dimensional (0-D) NPs, less than 5.1 nm in diameter with Cationic charge and similar results in size distribution by TEM. Nonetheless, developed as antioxidant activity IC50 was 1467 ± 25.9 µg/mL, antimicrobial activity tested G-ve strains, but not affected on tested G+ve strains and tested fungi. Evaluating toxicity effect of cationic CNCs against human blood erythrocytes (RBCs) and Lymphocyte Proliferation and the end point evaluate by comet assay, which proven no cytotoxic effect. Also, a high dose 500 µg/mL of CNCs highly significant (p < 0.05) reduction in cell viability of Caco-2 cancer cells after 24 h. incubation time, whereas the IC50 was 1884 ± 19.46 µg/mL. Moreover, genotoxic assay indicates Caco-2 cells cause apoptosis with no fragmentation in DNA. Undoubtedly, the obtained results brought about by the interaction of layers carrying opposing charges. Additionally, there is a balance between hydrophilic contact and electrostatic attraction. That emphasizes how the cationic CNCs have excellent potential for use as antioxidants, antimicrobials, and anticancer agents.
Collapse
Affiliation(s)
- Sara Mohamed Mahmoud
- Biotechnology Department, Faculty of Graduate Studies and Environmental Researches, Ain Shams University, Cairo, Egypt
| | - Safwat Hassan Ali
- Biochemistry Department, Faculty of Agriculture, Ain Shams University, Cairo, Egypt
| | - Mohamed M A Omar
- Biochemistry Department, Faculty of Agriculture, Ain Shams University, Cairo, Egypt
| |
Collapse
|
31
|
Monteiro CJP, Neves MGPMS, Nativi C, Almeida A, Faustino MAF. Porphyrin Photosensitizers Grafted in Cellulose Supports: A Review. Int J Mol Sci 2023; 24:3475. [PMID: 36834886 PMCID: PMC9967812 DOI: 10.3390/ijms24043475] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2023] [Revised: 01/30/2023] [Accepted: 02/06/2023] [Indexed: 02/12/2023] Open
Abstract
Cellulose is the most abundant natural biopolymer and owing to its compatibility with biological tissues, it is considered a versatile starting material for developing new and sustainable materials from renewable resources. With the advent of drug-resistance among pathogenic microorganisms, recent strategies have focused on the development of novel treatment options and alternative antimicrobial therapies, such as antimicrobial photodynamic therapy (aPDT). This approach encompasses the combination of photoactive dyes and harmless visible light, in the presence of dioxygen, to produce reactive oxygen species that can selectively kill microorganisms. Photosensitizers for aPDT can be adsorbed, entrapped, or linked to cellulose-like supports, providing an increase in the surface area, with improved mechanical strength, barrier, and antimicrobial properties, paving the way to new applications, such as wound disinfection, sterilization of medical materials and surfaces in different contexts (industrial, household and hospital), or prevention of microbial contamination in packaged food. This review will report the development of porphyrinic photosensitizers supported on cellulose/cellulose derivative materials to achieve effective photoinactivation. A brief overview of the efficiency of cellulose based photoactive dyes for cancer, using photodynamic therapy (PDT), will be also discussed. Particular attention will be devoted to the synthetic routes behind the preparation of the photosensitizer-cellulose functional materials.
Collapse
Affiliation(s)
- Carlos J. P. Monteiro
- LAQV-Requimte and Department of Chemistry, University of Aveiro, 3010-193 Aveiro, Portugal
| | | | - Cristina Nativi
- Department of Chemistry “Ugo Schiff”, University of Florence, via della Lastruccia, 3-13, 50019 Sesto Fiorentino, Italy
| | - Adelaide Almeida
- CESAM and Department of Biology, University of Aveiro, 3810-193 Aveiro, Portugal
| | | |
Collapse
|
32
|
Characterisation and modelling the mechanics of cellulose nanofibril added polyethersulfone ultrafiltration membranes. Heliyon 2023; 9:e13086. [PMID: 36785816 PMCID: PMC9918776 DOI: 10.1016/j.heliyon.2023.e13086] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2022] [Revised: 01/12/2023] [Accepted: 01/16/2023] [Indexed: 01/22/2023] Open
Abstract
The performance of the membranes can be improved by adding the appropriate amount of nanomaterials to the polymeric membranes that can be used for water/wastewater treatment. In this study, the effects of polyvinylpyrrolidone (PVP), the impact of different amounts (0.5% and 1% wt.) of cellulose nanofibril (CNF), and the combined effects of PVP-CNF on the properties/performance of the polyethersulfone-based (PES-based) membrane are investigated. All PES-based ultrafiltration (UF) membranes are manufactured employing the phase inversion method and characterised via Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and the relevant techniques to determine the properties, including porosity, mean pore size, contact angle, water content, and pure water flux tests. Furthermore, the thermal properties of the prepared membranes are investigated using thermal gravimetric analysis (TGA) and differential thermal analysis (DTA) techniques. Experimental and numerical methods are applied for the mechanical characterisation of prepared membranes. For the experimental process, tensile tests under dry and wet conditions are conducted. The finite element (FE) method and Mori-Tanaka mean-field homogenisation are used as numerical methods to provide more detailed knowledge of membrane mechanics.
Collapse
|
33
|
Tamantini S, Bergamasco S, Zikeli F, Humar M, Cavalera M, Romagnoli M. Cellulose Nano Crystals (CNC) as Additive for a Bio-Based Waterborne Acrylic Wood Coating: Decay, Artificial Weathering, Physical and Chemical Tests. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:442. [PMID: 36770403 PMCID: PMC9921673 DOI: 10.3390/nano13030442] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/10/2022] [Revised: 01/17/2023] [Accepted: 01/18/2023] [Indexed: 06/18/2023]
Abstract
Wood coatings prolong the service life of wood-based products, but they are usually of synthetic origin. The aim of the present article is to reduce the fossil-based compounds in a commercial waterborne acrylic coating by CNC addition and to test its performance. The coatings were applied on European beech and Norway spruce wood in order to test durability against Gloeophyllum trabeum (brown wood rot) and Trametes versicolor (white wood rot). Artificial weathering and blue stain, contact angle, physical tests (adhesion, impact and scratch test), chemical (FTIR) and morpho-anatomical analysis (SEM) were carried out. CNC addition increased viscosity, limiting the spreading of the coating into wood pores as visible after SEM observation, which reduced coating adhesion on the substrate. CNC improved fungal resistance as seen by a reduced mass loss and FTIR spectroscopy thanks to crosslinks formation, which reduced water sorption as well. Color change was not significant, and, on the other hand, glossiness was reduced but resulted as more homogeneous than control. CNC addition gave good results also in blue stain protection. CNC improved scratch resistance, but no visible change to impact was registered. CNC has promising results in coatings depending on wood and fungal species and presence of further commercial additives (biocides).
Collapse
Affiliation(s)
- Swati Tamantini
- Department for Innovation in Biological, Agro-Food and Forest Systems, University of Tuscia, 01100 Viterbo, Italy
| | - Sara Bergamasco
- Department for Innovation in Biological, Agro-Food and Forest Systems, University of Tuscia, 01100 Viterbo, Italy
| | - Florian Zikeli
- Department for Innovation in Biological, Agro-Food and Forest Systems, University of Tuscia, 01100 Viterbo, Italy
| | - Miha Humar
- Department of Wood Science and Technology, Biotechnical Faculty, University of Ljubljana, 1000 Ljubljana, Slovenia
| | | | - Manuela Romagnoli
- Department for Innovation in Biological, Agro-Food and Forest Systems, University of Tuscia, 01100 Viterbo, Italy
| |
Collapse
|
34
|
Singh SS, Behera SK, Rai S, Tripathy SK, Chakrabortty S, Mishra A. A critical review on nanomaterial based therapeutics for diabetic wound healing. Biotechnol Genet Eng Rev 2022:1-35. [PMID: 36576250 DOI: 10.1080/02648725.2022.2161732] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2022] [Accepted: 12/16/2022] [Indexed: 12/29/2022]
Abstract
Diabetes mellitus is a chronic endocrine disease that occurs mostly in the state of hyperglycemia (elevated blood glucose level). In the recent times, diabetes is listed under world's utmost critical health issues. Wound treatment procedures are complicated in diabetic individuals all over the world. Diabetic wound care not only involves high-cost, but also the primary cause of hospitalization, which can lead to amputation thereby reducing diabetic patient life expectancy. To lower the risk of amputation, wound healing requires the development of effective treatments. Traditional management systems for Diabetes are frequently chastised due to their high costs, difficulties in maintaining a sustainable supply chain and limited disposal alternatives. The worrisome rise in diabetes prevalence has sparked a surge of interest in the discovery of viable remedies to supplement existing treatments. Nanomaterials wound healing has a lot of potential for treating and preventing wound infections and it has recently gained popularity owing to its ability to transport drugs to the wound area in a regulated fashion, potentially overpowering the limits of traditional approaches. This research assessed several nanosystems, such as nanocarriers and nanotherapeutics, to explore how they can benefit in diabetic wound healing, with a focus on current obstacles and future prospects.
Collapse
Affiliation(s)
- Swati Sucharita Singh
- School of Biotechnology, Kalinga Institute of Industrial Technology, Bhubaneswar, India
| | - Susanta Kumar Behera
- School of Biotechnology, Kalinga Institute of Industrial Technology, Bhubaneswar, India
- Department of cell biology, IMGENEX India Pvt. Ltd, Bhubaneswar, India
| | - Suchita Rai
- Bauxite -Alumina Division, Jawaharlal Nehru Aluminium Research Development and Design Centre, Nagpur, India
| | - Suraj K Tripathy
- School of Biotechnology, Kalinga Institute of Industrial Technology, Bhubaneswar, India
- School of Chemical Technology, Kalinga Institute of Industrial Technology, Bhubaneswar, India
| | - Sankha Chakrabortty
- School of Biotechnology, Kalinga Institute of Industrial Technology, Bhubaneswar, India
- School of Chemical Technology, Kalinga Institute of Industrial Technology, Bhubaneswar, India
| | - Amrita Mishra
- School of Biotechnology, Kalinga Institute of Industrial Technology, Bhubaneswar, India
| |
Collapse
|
35
|
Ślęzak-Prochazka I, Batko KM, Ślęzak A. Evaluation of Transport Properties and Energy Conversion of Bacterial Cellulose Membrane Using Peusner Network Thermodynamics. ENTROPY (BASEL, SWITZERLAND) 2022; 25:3. [PMID: 36673144 PMCID: PMC9858365 DOI: 10.3390/e25010003] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/11/2022] [Revised: 12/16/2022] [Accepted: 12/17/2022] [Indexed: 06/17/2023]
Abstract
We evaluated the transport properties of a bacterial cellulose (BC) membrane for aqueous ethanol solutions. Using the Rr version of the Kedem-Katchalsky-Peusner formalism (KKP) for the concentration polarization (CP) conditions of solutions, the osmotic and diffusion fluxes as well as the membrane transport parameters were determined, such as the hydraulic permeability (Lp), reflection (σ), and solute permeability (ω). We used these parameters and the Peusner (Rijr) coefficients resulting from the KKP equations to assess the transport properties of the membrane based on the calculated dependence of the concentration coefficients: the resistance, coupling, and energy conversion efficiency for aqueous ethanol solutions. The transport properties of the membrane depended on the hydrodynamic conditions of the osmotic diffusion transport. The resistance coefficients R11r, R22r, and Rdetr were positive and higher, and the R12r coefficient was negative and lower under CP conditions (higher in convective than nonconvective states). The energy conversion was evaluated and fluxes were calculated for the U-, F-, and S-energy. It was found that the energy conversion was greater and the S-energy and F-energy were lower under CP conditions. The convection effect was negative, which means that convection movements were directed vertically upwards. Understanding the membrane transport properties and mechanisms could help to develop and improve the membrane technologies and techniques used in medicine and in water and wastewater treatment processes.
Collapse
Affiliation(s)
| | - Kornelia M. Batko
- Institute of Political Science, Faculty of Social Sciences, University of Silesia, Bankowa 12, 40-007 Katowice, Poland
| | - Andrzej Ślęzak
- Faculty of Health Science, Jan Dlugosz University, 13/15 Armia Krajowa Al, 42-200 Częstochowa, Poland
| |
Collapse
|
36
|
Mittag A, Rahman MM, Hafez I, Tajvidi M. Development of Lignin-Containing Cellulose Nanofibrils Coated Paper-Based Filters for Effective Oil-Water Separation. MEMBRANES 2022; 13:1. [PMID: 36676808 PMCID: PMC9862162 DOI: 10.3390/membranes13010001] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Revised: 12/12/2022] [Accepted: 12/13/2022] [Indexed: 06/17/2023]
Abstract
New methods of oil-water separation are needed as industrialization has increased the prevalence of oil-water mixtures on Earth. As an abundant and renewable resource with high oxygen and grease barrier properties, mechanically refined cellulose nanofibrils (CNFs) may have promising applications for oil-water separations. The unbleached form of these nanofibrils, lignin-containing CNFs (LCNFs), have also been found to display extraordinary barrier properties and are more environmentally friendly and cost-effective than CNFs. Herein, both wet and dry LCNF-modified filter papers have been developed by coating commercial filter paper with an LCNF suspension utilizing vacuum filtration. The LCNF-modified filters were tested for effectiveness in separating oil-water emulsions, and a positive relationship was discovered between a filter's LCNF coat weight and its oil collection capabilities. The filtration time was also analyzed for various coat weights, revealing a trend of high flux for low LCNF coat weights giving-way-to predictions of a coat weight upper limit. Additionally, it was found that wet filters tend to have higher flux values and oil separation efficiency values than dry filters of the same LCNF coat weight. Results confirm that the addition of LCNF to commercial filter papers has the potential to be used in oil-water separation.
Collapse
Affiliation(s)
- Anna Mittag
- Department of Chemical and Biomolecular Engineering, University of Notre Dame, Notre Dame, IN 46556, USA
| | - Md Musfiqur Rahman
- Laboratory of Renewable Nanomaterials, School of Forest Resources, University of Maine, 5755 Nutting Hall, Orono, ME 04469, USA
| | - Islam Hafez
- Laboratory of Renewable Nanomaterials, School of Forest Resources, University of Maine, 5755 Nutting Hall, Orono, ME 04469, USA
| | - Mehdi Tajvidi
- Laboratory of Renewable Nanomaterials, School of Forest Resources, University of Maine, 5755 Nutting Hall, Orono, ME 04469, USA
| |
Collapse
|
37
|
Sierra-Romero A, Novakovic K, Geoghegan M. Adhesive Interfaces toward a Zero-Waste Industry. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:15476-15493. [PMID: 36475727 PMCID: PMC9776538 DOI: 10.1021/acs.langmuir.2c02436] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/05/2022] [Revised: 11/14/2022] [Indexed: 06/17/2023]
Abstract
This Feature Article evaluates ongoing efforts to adapt adhesives toward the goal of zero-waste living and suggests the most promising future directions. Adhesives are not always considered in zero-waste manufacturing because they represent only a small fraction of a product and offer no additional functionality. However, their presence restricts the reintegration of constituent parts into a circular economy, so a new generation of adhesives is required. Furthermore, their production often leads to harmful pollutants. Here, two main approaches toward addressing these problems are considered: first, the use of natural materials that replace petroleum-based polymers from which conventional adhesives are made and second, the production of dismantlable adhesives capable of debonding on demand with the application of an external stimulus. These approaches, either individually or combined, offer a new paradigm in zero-waste industrial production and consumer applications.
Collapse
|
38
|
Suresh Khurd A, Kandasubramanian B. A systematic review of cellulosic material for green electronics devices. CARBOHYDRATE POLYMER TECHNOLOGIES AND APPLICATIONS 2022. [DOI: 10.1016/j.carpta.2022.100234] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022] Open
|
39
|
Scroccarello A, Della Pelle F, Del Carlo M, Compagnone D. Optical plasmonic sensing based on nanomaterials integrated in solid supports. A critical review. Anal Chim Acta 2022; 1237:340594. [DOI: 10.1016/j.aca.2022.340594] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/06/2022] [Revised: 11/02/2022] [Accepted: 11/03/2022] [Indexed: 11/09/2022]
|
40
|
Liang Q, Wang Y, Yang Y, Xu T, Xu Y, Zhao Q, Heo SH, Kim MS, Jeong YH, Yao S, Song X, Choi SE, Si C. Nanocellulose/two dimensional nanomaterials composites for advanced supercapacitor electrodes. Front Bioeng Biotechnol 2022; 10:1024453. [PMID: 36267450 PMCID: PMC9578560 DOI: 10.3389/fbioe.2022.1024453] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/21/2022] [Accepted: 09/09/2022] [Indexed: 11/13/2022] Open
Abstract
With the emerging of the problems of environmental pollution and energy crisis, the development of high-efficiency energy storage technology and green renewable energy is imminent. Supercapacitors have drawn great attention in wearable electronics because of their good performance and portability. Electrodes are the key to fabricate high-performance supercapacitors with good electrochemical properties and flexibility. As a biomass based derived material, nanocellulose has potential application prospects in supercapacitor electrode materials due to its biodegradability, high mechanical strength, strong chemical reactivity, and good mechanical flexibility. In this review, the research progress of nanocellulose/two dimensional nanomaterials composites is summarized for supercapacitors in recent years. First, nanocellulose/MXene composites for supercapacitors are reviewed. Then, nanocellulose/graphene composites for supercapacitors are comprehensively elaborated. Finally, we also introduce the current challenges and development potential of nanocellulose/two dimensional nanomaterials composites in supercapacitors.
Collapse
Affiliation(s)
- Qidi Liang
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, China
| | - Yaxuan Wang
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, China
| | - Yanfan Yang
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, China
| | - Ting Xu
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, College of Light Industry and Food Engineering, Guangxi University, Nanning, China
- *Correspondence: Ting Xu, ; Xueping Song, ; Sun-Eun Choi, ; Chuanling Si,
| | - Ying Xu
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, China
| | - Qingshuang Zhao
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, China
| | - Su-Hak Heo
- Department of Medicinal Bioscience, Konkuk University (Glocal Campus), Chungju-si, Chungcheongbuk-do, South Korea
| | - Min-Seok Kim
- Department of Forest Biomaterials Engineering, College of Forest & Environmental Sciences, Kangwon National University, Chuncheon, South Korea
| | - Young-Hwan Jeong
- Department of Forest Biomaterials Engineering, College of Forest & Environmental Sciences, Kangwon National University, Chuncheon, South Korea
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, College of Light Industry and Food Engineering, Guangxi University, Nanning, China
| | - Xueping Song
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, College of Light Industry and Food Engineering, Guangxi University, Nanning, China
- *Correspondence: Ting Xu, ; Xueping Song, ; Sun-Eun Choi, ; Chuanling Si,
| | - Sun-Eun Choi
- Department of Forest Biomaterials Engineering, College of Forest & Environmental Sciences, Kangwon National University, Chuncheon, South Korea
- *Correspondence: Ting Xu, ; Xueping Song, ; Sun-Eun Choi, ; Chuanling Si,
| | - Chuanling Si
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, College of Light Industry and Food Engineering, Guangxi University, Nanning, China
- State Key Laboratory of Tree Genetics and Breeding, Northeast Forestry University, Harbin, China
- *Correspondence: Ting Xu, ; Xueping Song, ; Sun-Eun Choi, ; Chuanling Si,
| |
Collapse
|
41
|
Phan VHG, Murugesan M, Huong H, Le TT, Phan TH, Manivasagan P, Mathiyalagan R, Jang ES, Yang DC, Li Y, Thambi T. Cellulose Nanocrystals-Incorporated Thermosensitive Hydrogel for Controlled Release, 3D Printing, and Breast Cancer Treatment Applications. ACS APPLIED MATERIALS & INTERFACES 2022; 14:42812-42826. [PMID: 36112403 DOI: 10.1021/acsami.2c05864] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
In situ-gel-forming thermoresponsive copolymers have been widely exploited in controlled delivery applications because their critical gel temperature is similar to human body temperature. However, there are limitations to controlling the delivery of biologics from a hydrogel network because of the poor networking and reinforcement between the copolymer networks. This study developed an in situ-forming robust injectable and 3D printable hydrogel network based on cellulose nanocrystals (CNCs) incorporated amphiphilic copolymers, poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide (PCLA). In addition, the physicochemical and mechanical properties of injectable hydrogels were controlled by physically incorporating CNCs with amphiphilic PCLA copolymers. CNCs played an unprecedented role in physically reinforcing the PCLA copolymers' micelle network via intermicellar bridges. Apart from that, the free-flowing closely packed rod-like CNCs incorporated PCLA micelle networks at low temperature transformed to a stable viscoelastic hydrogel network at physiological temperature. CNC incorporated PCLA copolymer sols effectively coordinated with hydrophobic doxorubicin and water-soluble lysozyme by a combination of hydrophobic and hydrogen bonding interaction and controlled the release of biologics. As shown by the 3D printing results, the biocompatible PCLA hydrogels continuously extruded during printing had good injectability and maintained high shape fidelity after printing without any secondary cross-linking steps. The interlayer bonding between the printed layers was high and formed stable 3D structures up to 10 layers. Subcutaneous injection of free-flowing CNC incorporated PCLA copolymer sols to BALB/c mice formed a hydrogel instantly and showed controlled biodegradation of the hydrogel depot without induction of toxicity at the implantation sites or surrounding tissues. At the same time, the in vivo antitumor effect on the MDA-MB-231 tumor xenograft model demonstrated that DOX-loaded hydrogel formulation significantly inhibited the tumor growth. In summary, the CNC incorporated biodegradable hydrogels developed in this study exhibit a prolonged release with special release kinetics for hydrophobic and hydrophilic biologics.
Collapse
Affiliation(s)
- V H Giang Phan
- Biomaterials and Nanotechnology Research Group, Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam
| | - Mohanapriya Murugesan
- Graduate School of Biotechnology, College of Life Sciences, Kyung Hee University, Yongin si, Gyeonggi do 17104, Republic of Korea
| | - Ha Huong
- Biomaterials and Nanotechnology Research Group, Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam
| | - Thanh-Tam Le
- Biomaterials and Nanotechnology Research Group, Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam
| | - Thuy-Hien Phan
- Biomaterials and Nanotechnology Research Group, Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam
| | - Panchanathan Manivasagan
- Department of Applied Chemistry, Kumoh National Institute of Technology, Daehak-ro 61, Gumi, Gyeongbuk 39177, Republic of Korea
| | - Ramya Mathiyalagan
- Graduate School of Biotechnology, College of Life Sciences, Kyung Hee University, Yongin si, Gyeonggi do 17104, Republic of Korea
| | - Eue-Soon Jang
- Department of Applied Chemistry, Kumoh National Institute of Technology, Daehak-ro 61, Gumi, Gyeongbuk 39177, Republic of Korea
| | - Deok Chun Yang
- Graduate School of Biotechnology, College of Life Sciences, Kyung Hee University, Yongin si, Gyeonggi do 17104, Republic of Korea
| | - Yi Li
- College of Materials and Textile Engineering & Nanotechnology Research Institute, Jiaxing University, Jiaxing, Zhejiang Province 314001, PR China
| | - Thavasyappan Thambi
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| |
Collapse
|
42
|
Riccio BVF, Silvestre ALP, Meneguin AB, Ribeiro TDC, Klosowski AB, Ferrari PC, Chorilli M. Exploiting Polymeric Films as a Multipurpose Drug Delivery System: a Review. AAPS PharmSciTech 2022; 23:269. [PMID: 36171494 DOI: 10.1208/s12249-022-02414-6] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2022] [Accepted: 08/31/2022] [Indexed: 11/30/2022] Open
Abstract
Polymeric films are drug delivery systems that maintain contact with the delivery tissue and sustain a controlled release of therapeutic molecules. These systems allow a longer time of drug contact with the target site in the case of topical treatments and allow the controlled administration of drugs. They can be manufactured by various methods such as solvent casting, hot melt extrusion, electrospinning, and 3D bioprinting. Furthermore, they can employ various polymers, for example PVP, PVA, cellulose derivatives, chitosan, gelling gum, pectin, and alginate. Its versatility is also applicable to different routes of administration, as it can be administered to the skin, oral mucosa, vaginal canal, and eyeballs. All these factors allow numerous combinations to obtain a better treatment. This review focuses on exploring some possible ways to develop them and some particularities and advantages/disadvantages in each case. It also aims to show the versatility of these systems and the advantages and disadvantages in each case, as they bring the opportunity to develop different medicines to facilitate therapies for the most diverse purposes .
Collapse
Affiliation(s)
- Bruno Vincenzo Fiod Riccio
- Department of Drugs and Medicines, School of Pharmaceutical Sciences, São Paulo State University, Araraquara, São Paulo, Brazil.
| | - Amanda Letícia Polli Silvestre
- Department of Drugs and Medicines, School of Pharmaceutical Sciences, São Paulo State University, Araraquara, São Paulo, Brazil
| | - Andreia Bagliotti Meneguin
- Department of Drugs and Medicines, School of Pharmaceutical Sciences, São Paulo State University, Araraquara, São Paulo, Brazil
| | - Tais de Cassia Ribeiro
- Department of Drugs and Medicines, School of Pharmaceutical Sciences, São Paulo State University, Araraquara, São Paulo, Brazil
| | - Ana Beatriz Klosowski
- Department of Pharmaceutical Sciences, Ponta Grossa State University, Ponta Grossa, Paraná, Brazil
| | | | - Marlus Chorilli
- Department of Drugs and Medicines, School of Pharmaceutical Sciences, São Paulo State University, Araraquara, São Paulo, Brazil
| |
Collapse
|
43
|
Polysaccharides-based nanofibrils: From tissue engineering to biosensor applications. Carbohydr Polym 2022; 291:119670. [DOI: 10.1016/j.carbpol.2022.119670] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2022] [Revised: 05/24/2022] [Accepted: 05/25/2022] [Indexed: 11/22/2022]
|
44
|
Vineeth SK, Gadhave RV, Gadekar PT. Polyvinyl alcohol–cellulose blend wood adhesive modified by citric acid and its effect on physical, thermal, mechanical and performance properties. Polym Bull (Berl) 2022. [DOI: 10.1007/s00289-022-04439-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/15/2022]
|
45
|
Qiao H, Li M, Wang C, Zhang Y, Zhou H. Progress, Challenge and Perspective of Fabricating Cellulose. Macromol Rapid Commun 2022; 43:e2200208. [PMID: 35809256 DOI: 10.1002/marc.202200208] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/03/2022] [Revised: 06/21/2022] [Indexed: 11/07/2022]
Abstract
Cellulose as the most abundant biopolymers on Earth, presents appealing performance in mechanical properties, thermal management, and versatile functionalization. The development of fabrication methods closely relates to enrich its functionality and reduce manufacture cost. However, cellulose is hard to be dissolved by most common solvents or melt due to its recalcitrant property. Herein, the recent progress of fabricating cellulose is summarized. First, the unique hierarchical structure of cellulose is fully investigated and the resulted processability is highlighted in directions of down to nanocellulose, dissolution, and thermoplastic processing. Then, the reported fabrication methods are summarized in three aspects: (1) self-assembly from nano/micro cellulose suspensions, especially the self-assembly of cellulose nanocrystals; (2) dissolution-regeneration-drying, covering spinning and solvent infusion processing; and (3) thermoplastic processing, focusing on analysis of the setup and the morphology changes of the prepared products. In each aspect, the flowchart of the fabrication process, the behind mechanism, fabricated products, and effects of processing parameters are explored. Finally, this review provides a perspective on the further direction of fabricating cellulose, especially the challenges toward mass production of cellulose. This article is protected by copyright. All rights reserved.
Collapse
Affiliation(s)
- Haiyu Qiao
- School of Mechanical and Electrical Engineering, Soochow University, Suzhou, 215000, China.,State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan, 430074, P. R. China
| | - Maoyuan Li
- State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan, 430074, P. R. China
| | - Chuanyang Wang
- School of Mechanical and Electrical Engineering, Soochow University, Suzhou, 215000, China
| | - Yun Zhang
- State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan, 430074, P. R. China
| | - Huamin Zhou
- State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan, 430074, P. R. China
| |
Collapse
|
46
|
Abdelhamid HN, Mathew AP. Cellulose-Based Nanomaterials Advance Biomedicine: A Review. Int J Mol Sci 2022; 23:5405. [PMID: 35628218 PMCID: PMC9140895 DOI: 10.3390/ijms23105405] [Citation(s) in RCA: 26] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/31/2022] [Revised: 04/21/2022] [Accepted: 05/10/2022] [Indexed: 02/04/2023] Open
Abstract
There are various biomaterials, but none fulfills all requirements. Cellulose biopolymers have advanced biomedicine to satisfy high market demand and circumvent many ecological concerns. This review aims to present an overview of cellulose knowledge and technical biomedical applications such as antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration. It includes an extensive bibliography of recent research findings from fundamental and applied investigations. Cellulose-based materials are tailorable to obtain suitable chemical, mechanical, and physical properties required for biomedical applications. The chemical structure of cellulose allows modifications and simple conjugation with several materials, including nanoparticles, without tedious efforts. They render the applications cheap, biocompatible, biodegradable, and easy to shape and process.
Collapse
Affiliation(s)
- Hani Nasser Abdelhamid
- Department of Materials and Environmental Chemistry, Stockholm University, SE-10691 Stockholm, Sweden;
- Advanced Multifunctional Materials Laboratory, Department of Chemistry, Faculty of Science, Assiut University, Assiut 71515, Egypt
| | - Aji P. Mathew
- Department of Materials and Environmental Chemistry, Stockholm University, SE-10691 Stockholm, Sweden;
| |
Collapse
|
47
|
Lan L, Ping J, Xiong J, Ying Y. Sustainable Natural Bio-Origin Materials for Future Flexible Devices. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2200560. [PMID: 35322600 PMCID: PMC9130888 DOI: 10.1002/advs.202200560] [Citation(s) in RCA: 21] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/28/2022] [Revised: 02/27/2022] [Indexed: 05/12/2023]
Abstract
Flexible devices serve as important intelligent interfaces in various applications involving health monitoring, biomedical therapies, and human-machine interfacing. To address the concern of electronic waste caused by the increasing usage of electronic devices based on synthetic polymers, bio-origin materials that possess environmental benignity as well as sustainability offer new opportunities for constructing flexible electronic devices with higher safety and environmental adaptivity. Herein, the bio-source and unique molecular structures of various types of natural bio-origin materials are briefly introduced. Their properties and processing technologies are systematically summarized. Then, the recent progress of these materials for constructing emerging intelligent flexible electronic devices including energy harvesters, energy storage devices, and sensors are introduced. Furthermore, the applications of these flexible electronic devices including biomedical implants, artificial e-skin, and environmental monitoring are summarized. Finally, future challenges and prospects for developing high-performance bio-origin material-based flexible devices are discussed. This review aims to provide a comprehensive and systematic summary of the latest advances in the natural bio-origin material-based flexible devices, which is expected to offer inspirations for exploitation of green flexible electronics, bridging the gap in future human-machine-environment interactions.
Collapse
Affiliation(s)
- Lingyi Lan
- Laboratory of Agricultural Information Intelligent SensingSchool of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhouZhejiang310058China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhouZhejiang310058China
| | - Jianfeng Ping
- Laboratory of Agricultural Information Intelligent SensingSchool of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhouZhejiang310058China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhouZhejiang310058China
| | - Jiaqing Xiong
- Innovation Center for Textile Science and TechnologyDonghua University2999 North Renmin RoadShanghai201620China
| | - Yibin Ying
- Laboratory of Agricultural Information Intelligent SensingSchool of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhouZhejiang310058China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhouZhejiang310058China
| |
Collapse
|
48
|
Recent advancement in isolation, processing, characterization and applications of emerging nanocellulose: A review. Int J Biol Macromol 2022; 206:954-976. [PMID: 35304199 DOI: 10.1016/j.ijbiomac.2022.03.064] [Citation(s) in RCA: 44] [Impact Index Per Article: 22.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2022] [Revised: 03/07/2022] [Accepted: 03/11/2022] [Indexed: 02/08/2023]
Abstract
The emergence of nanocellulose from various natural resources as a promising nanomaterial has been gaining interest for a wide range application. Nanocellulose serves as an excellent candidate since it contributes numerous superior properties and functionalities. In this review, details of the three main nanocellulose categorised: cellulose nanocrystal (CNC), cellulose nanofibril (CNF), and bacterial nanocellulose (BNC) have been described. We focused on the preparation and isolation techniques to produce nanocellulose including alkaline pre-treatment, acid hydrolysis, TEMPO-mediated oxidation, and enzymatic hydrolysis. The surface modification of nanocellulose through esterification, silylation, amidation, phosphorylation, and carboxymethylation to improve the diverse applications has also been reviewed. Some invigorating perspectives on the applications, challenges, and future directions on the relevant issues regarding nanocellulose are also presented.
Collapse
|
49
|
Ventura C, Marques C, Cadete J, Vilar M, Pedrosa JFS, Pinto F, Fernandes SN, da Rosa RR, Godinho MH, Ferreira PJT, Louro H, Silva MJ. Genotoxicity of Three Micro/Nanocelluloses with Different Physicochemical Characteristics in MG-63 and V79 Cells. J Xenobiot 2022; 12:91-108. [PMID: 35645290 PMCID: PMC9149940 DOI: 10.3390/jox12020009] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/08/2022] [Revised: 04/14/2022] [Accepted: 04/18/2022] [Indexed: 12/10/2022] Open
Abstract
(1) Background: Nanocellulose is an innovative engineered nanomaterial with an enormous potential for use in a wide array of industrial and biomedical applications and with fast growing economic value. The expanding production of nanocellulose is leading to an increased human exposure, raising concerns about their potential health effects. This study was aimed at assessing the potential toxic and genotoxic effects of different nanocelluloses in two mammalian cell lines; (2) Methods: Two micro/nanocelluloses, produced with a TEMPO oxidation pre-treatment (CNFs) and an enzymatic pre-treatment (CMFs), and cellulose nanocrystals (CNCs) were tested in osteoblastic-like human cells (MG-63) and Chinese hamster lung fibroblasts (V79) using the MTT and clonogenic assays to analyse cytotoxicity, and the micronucleus assay to test genotoxicity; (3) Results: cytotoxicity was observed by the clonogenic assay in V79 cells, particularly for CNCs, but not by the MTT assay; CNF induced micronuclei in both cell lines and nucleoplasmic bridges in MG-63 cells; CMF and CNC induced micronuclei and nucleoplasmic bridges in MG-63 cells, but not in V79 cells; (4) Conclusions: All nanocelluloses revealed cytotoxicity and genotoxicity, although at different concentrations, that may be related to their physicochemical differences and availability for cell uptake, and to differences in the DNA damage response of the cell model.
Collapse
Affiliation(s)
- Célia Ventura
- Department of Human Genetics, National Institute of Health Doutor Ricardo Jorge (INSA), Av. Padre Cruz, 1649-016 Lisbon, Portugal; (C.M.); (J.C.); (M.V.); (F.P.); (H.L.); (M.J.S.)
- Center for Toxicogenomics and Human Health (ToxOmics), NOVA Medical School-FCM, UNL, Rua Câmara Pestana, 6 Ed. CEDOC II, 1150-082 Lisbon, Portugal
| | - Catarina Marques
- Department of Human Genetics, National Institute of Health Doutor Ricardo Jorge (INSA), Av. Padre Cruz, 1649-016 Lisbon, Portugal; (C.M.); (J.C.); (M.V.); (F.P.); (H.L.); (M.J.S.)
| | - João Cadete
- Department of Human Genetics, National Institute of Health Doutor Ricardo Jorge (INSA), Av. Padre Cruz, 1649-016 Lisbon, Portugal; (C.M.); (J.C.); (M.V.); (F.P.); (H.L.); (M.J.S.)
| | - Madalena Vilar
- Department of Human Genetics, National Institute of Health Doutor Ricardo Jorge (INSA), Av. Padre Cruz, 1649-016 Lisbon, Portugal; (C.M.); (J.C.); (M.V.); (F.P.); (H.L.); (M.J.S.)
| | - Jorge F. S. Pedrosa
- CIEPQPF, Department of Chemical Engineering, University of Coimbra, Pólo II, Rua Silvo Lima, 3030-790 Coimbra, Portugal; (J.F.S.P.); (P.J.T.F.)
| | - Fátima Pinto
- Department of Human Genetics, National Institute of Health Doutor Ricardo Jorge (INSA), Av. Padre Cruz, 1649-016 Lisbon, Portugal; (C.M.); (J.C.); (M.V.); (F.P.); (H.L.); (M.J.S.)
- Center for Toxicogenomics and Human Health (ToxOmics), NOVA Medical School-FCM, UNL, Rua Câmara Pestana, 6 Ed. CEDOC II, 1150-082 Lisbon, Portugal
| | - Susete Nogueira Fernandes
- CENIMAT/I3N, Department of Materials Science, NOVA School of Science and Technology (FCT NOVA), NOVA University Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal; (S.N.F.); (R.R.d.R.); (M.H.G.)
| | - Rafaela Raupp da Rosa
- CENIMAT/I3N, Department of Materials Science, NOVA School of Science and Technology (FCT NOVA), NOVA University Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal; (S.N.F.); (R.R.d.R.); (M.H.G.)
| | - Maria Helena Godinho
- CENIMAT/I3N, Department of Materials Science, NOVA School of Science and Technology (FCT NOVA), NOVA University Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal; (S.N.F.); (R.R.d.R.); (M.H.G.)
| | - Paulo J. T. Ferreira
- CIEPQPF, Department of Chemical Engineering, University of Coimbra, Pólo II, Rua Silvo Lima, 3030-790 Coimbra, Portugal; (J.F.S.P.); (P.J.T.F.)
| | - Henriqueta Louro
- Department of Human Genetics, National Institute of Health Doutor Ricardo Jorge (INSA), Av. Padre Cruz, 1649-016 Lisbon, Portugal; (C.M.); (J.C.); (M.V.); (F.P.); (H.L.); (M.J.S.)
- Center for Toxicogenomics and Human Health (ToxOmics), NOVA Medical School-FCM, UNL, Rua Câmara Pestana, 6 Ed. CEDOC II, 1150-082 Lisbon, Portugal
| | - Maria João Silva
- Department of Human Genetics, National Institute of Health Doutor Ricardo Jorge (INSA), Av. Padre Cruz, 1649-016 Lisbon, Portugal; (C.M.); (J.C.); (M.V.); (F.P.); (H.L.); (M.J.S.)
- Center for Toxicogenomics and Human Health (ToxOmics), NOVA Medical School-FCM, UNL, Rua Câmara Pestana, 6 Ed. CEDOC II, 1150-082 Lisbon, Portugal
| |
Collapse
|
50
|
Zhao X, Chen S, Wu Z, Sheng N, Zhang M, Liang Q, Han Z, Wang H. Toward continuous high-performance bacterial cellulose macrofibers by implementing grading-stretching in spinning. Carbohydr Polym 2022; 282:119133. [DOI: 10.1016/j.carbpol.2022.119133] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/21/2021] [Revised: 01/07/2022] [Accepted: 01/08/2022] [Indexed: 11/27/2022]
|