LaALMT1 mediates malate release from phosphorus-deficient white lupin root tips and metal root to shoot translocation

Under phosphorus (P) deficiency, Lupinus albus (white lupin) releases large amounts of organic acid anions from specialized root structures, so-called cluster or proteoid roots, to mobilize and acquire sparingly soluble phosphates from a restricted soil volume. The molecular mechanisms underlying this release and its regulation are, however, poorly understood. Here, we identified a gene belonging to the aluminium (Al)-activated malate transporter (ALMT) family that specifically contributes to malate, but not citrate release. This gene, LaALMT1, was most prominently expressed in the root apices under P deficiency, including those of cluster roots and was also detected in the root stele. Contrary to several ALMT homologs in other species, the expression was not stimulated, but moderately repressed by Al. Aluminium-independent malate currents were recorded from the plasma membrane localized LaALMT1 expressed in Xenopus oocytes. In composite lupins with transgenic roots, LaALMT1 was efficiently mutated by CRISPR-Cas9, leading to diminished malate efflux and lower xylem sap malate concentrations. When grown in an alkaline P-deficient soil, mutant shoot phosphate concentrations were similar, but iron and potassium concentrations were diminished in old leaves, suggesting a role for ALMT1 in metal root to shoot translocation, a function that was also supported by growth in hydroponics.

Melatonin mitigates cadmium and aluminium toxicity through modulation of antioxidant potential in Brassica napus L

Melatonin has emerged as an essential molecule in plants, due to its role in defence against metal toxicity. Aluminium (Al) and cadmium (Cd) toxicity inhibit rapeseed seedling growth. In this study, we applied different doses of melatonin (50 and 100 µm) to alleviate Al (25 µm) and Cd (25 µm) stress in rapeseed seedlings. Results show that Al and Cd caused toxicity in rapeseed seedling, as evidenced by a decrease in height, biomass and antioxidant enzyme activity. Melatonin increased the expression of melatonin biosynthesis-related Brassica napus genes for caffeic acid O-methyl transferase (BnCOMT) under Al and Cd stress. The genes BnCOMT-1, BnCOMT-5 and BnCOMT-8 showed up-regulated expression, while BnCOMT-4 and BnCOMT-6 were down-regulated during incubation in water. Melatonin application increased the germination rate, shoot length, root length, fresh and dry weight of seedlings. Melatonin supplementation under Al and Cd stress increased superoxide dismutase, catalase, peroxidase, ascorbate peroxidase, proline, chlorophyll and anthocyanin content, as well as photosynthesis rate. Both Cd and Al treatments significantly increased hydrogen peroxide and malondialdehyde levels in rapeseed seedlings, which were strictly counterbalanced by melatonin. Analysis of Cd and Al in different subcellular compartments showed that melatonin enhanced cell wall and soluble fractions, but reduced the vacuolar and organelle fractions in Al- and Cd-treated seedlings. These results suggest that melatonin-induced improvements in antioxidant potential, biomass, photosynthesis rate and successive Cd and Al sequestration play a pivotal role in plant tolerance to Al and Cd stress. This mechanism may have potential implications in safe food production.

Aluminium is essential for root growth and development of tea plants (Camellia sinensis)

On acid soils, the trivalent aluminium ion (Al³⁺ ) predominates and is very rhizotoxic to most plant species. For some native plant species adapted to acid soils including tea (Camellia sinensis), Al³⁺ has been regarded as a beneficial mineral element. In this study, we discovered that Al³⁺ is actually essential for tea root growth and development in all the tested varieties. Aluminum ion promoted new root growth in five representative tea varieties with dose-dependent responses to Al³⁺ availability. In the absence of Al³⁺ , the tea plants failed to generate new roots, and the root tips were damaged within 1 d of Al deprivation. Structural analysis of root tips demonstrated that Al was required for root meristem development and activity. In situ morin staining of Al³⁺ in roots revealed that Al mainly localized to nuclei in root meristem cells, but then gradually moved to the cytosol when Al³⁺ was subsequently withdrawn. This movement of Al³⁺ from nuclei to cytosols was accompanied by exacerbated DNA damage, which suggests that the nuclear-targeted Al primarily acts to maintain DNA integrity. Taken together, these results provide novel evidence that Al³⁺ is essential for root growth in tea plants through maintenance of DNA integrity in meristematic cells.

A HF Loaded Lewis-Acidic Aluminium Chlorofluoride for Hydrofluorination Reactions

The very strong Lewis acid aluminium chlorofluoride (ACF) was loaded with anhydrous HF. The interaction between the surface of the catalyst and HF was investigated using a variety of characterization methods, which revealed the formation of polyfluorides. Moreover, the reactivity of the HF-loaded ACF towards the hydrofluorination of alkynes was studied.

Cassia tora extract alleviates Aβ1-42 aggregation processes in vitro and protects against aluminium-induced neurodegeneration in rats

OBJECTIVES

To examine the ability of Cassia tora extract to produce, in vitro and in vivo, beneficial effects with respect to events occurring during Alzheimer's disease.

METHODS

Previously characterised methanol extract of C. tora was tested for its ability to lessen Aβ₄₂ aggregation processes in vitro and to alleviate aluminium-induced impairments in vivo in rats.

KEY FINDINGS

Cassia tora extract prevents the aggregation of monomeric, oligomeric and fibrillary Aβ_1-42 in vitro. Moreover, the daily ingestion of 100 and 400 milligrams of the extract per kilogram of body weight for 60 days ameliorates the neurobehavioral and cognitive abilities of aluminium-treated rats in vivo. Importantly, treatments with the extract trigger a significant recovery of antioxidant enzymes function, a diminution of lipid peroxidation and acetylcholinesterase activity, a decrease of pro-inflammatory cytokines expression and an increase of brain-derived neurotrophic factor levels in both the hippocampus and the frontal cortex. Finally, we evidence that the extract is able to ameliorate the aluminium-dependent loss of neuronal integrity in the CA1 and CA3 regions of the hippocampus.

CONCLUSIONS

Altogether, our results reveal that methanol extract of C. tora is able to prevent typical AD-related events and therefore stands as a promising mild and natural anti-AD multitarget compound.

Predictive value of non-specific bronchial challenge testing for respiratory symptoms and lung function in aluminium smelter workers

OBJECTIVE

To assess the predictive value of bronchial hyper-responsiveness (BHR) for the subsequent development of respiratory symptoms, airflow limitation and decline in lung function among aluminium smelter workers.

METHODS

An inception cohort study of new employees at two Australian aluminium smelters was conducted. Participants completed a modified British Medical Research Council respiratory questionnaire, spirometry and a methacholine bronchial challenge test at baseline and at annual follow-up reviews. BHR was defined as PD₂₀ ≤4000 µg. Poisson and mixed effects models were fitted to respiratory symptoms and lung function (forced expiratory volume in 1 s (FEV₁) and FEV₁/forced vital capacity (FVC)).

RESULTS

Baseline interview and lung function testing were completed by 278 workers, who were followed for a median of 4 years. BHR at baseline, present in 82 workers, was not associated with incident wheeze risk ratio (RR)=1.07 (95% CI 0.74 to 1.55) and cough RR=0.78 (95% CI 0.45, 1.35), but there was some increased risk of chest tightness RR=1.40 (95% CI 0.99, 1.98) after adjustment for age, sex, smoking and atopy. BHR at baseline was associated with lower FEV₁ and FVC, although the rate of annual decline in FEV₁ or FVC was similar between those with or without BHR. The specificity of BHR was 77% for wheeze, 70% for cough and 77% for chest tightness, but the sensitivity was poor, at 33%, 24% and 39%, respectively.

CONCLUSION

Methacholine challenge testing at entry to employment was not sufficiently predictive of later adverse respiratory outcomes, and notwithstanding the study limitations is unlikely to be a useful pre-employment or preplacement screening test in the aluminium smelting industry.

State-of-the-art in marketed adjuvants and formulations in Allergen Immunotherapy: A position paper of the European Academy of Allergy and Clinical Immunology (EAACI)

Since the introduction of allergen immunotherapy (AIT) over 100 years ago, focus has been on standardization of allergen extracts, with reliable molecular composition of allergens receiving the highest attention. While adjuvants play a major role in European AIT, they have been less well studied. In this Position Paper, we summarize current unmet needs of adjuvants in AIT citing current evidence. Four adjuvants are used in products marketed in Europe: aluminium hydroxide (Al(OH)₃ ) is the most frequently used adjuvant, with microcrystalline tyrosine (MCT), monophosphoryl lipid A (MPLA) and calcium phosphate (CaP) used less frequently. Recent studies on humans, and using mouse models, have characterized in part the mechanisms of action of adjuvants on pre-existing immune responses. AIT differs from prophylactic vaccines that provoke immunity to infectious agents, as in allergy the patient is presensitized to the antigen. The intended mode of action of adjuvants is to simultaneously enhance the immunogenicity of the allergen, while precipitating the allergen at the injection site to reduce the risk of anaphylaxis. Contrasting immune effects are seen with different adjuvants. Aluminium hydroxide initially boosts Th2 responses, while the other adjuvants utilized in AIT redirect the Th2 immune response towards Th1 immunity. After varying lengths of time, each of the adjuvants supports tolerance. Further studies of the mechanisms of action of adjuvants may advise shorter treatment periods than the current three-to-five-year regimens, enhancing patient adherence. Improved lead compounds from the adjuvant pipeline are under development and are explored for their capacity to fill this unmet need.

Linear Elastic FE-Analysis of Porous, Laser Welded, Heat Treatable, Aluminium High Pressure Die Castings Based on X-Ray Computed Tomography Data

The welding of aluminium high pressure die castings is a well known and broadly investigated challenge in various fields of industry and research. Prior research in this specific field mainly focused on the optimisation of the welding and the casting process and on the cause of the frequently occurring porosity and incomplete fusion phenomena, whereas the impacts of these defects have hardly been addressed. Therefore, the underlying study presents the investigation of weldments in EN AC-AlSi10MnMg high pressure aluminium die castings by linear elastic finite element analysis based on X-ray computed tomography as a novel approach. Hereby, four laser weldments with differing surfaces and pore contents were investigated by X-ray computed tomography and tensile testing. Based on the voxel datasets of the porous weldments, triangular finite element meshes were generated and a numerical finite element analysis was conducted. Good agreement of the stress-strain curves between the simulations and the experiments was achieved.

Overcoming Crystallinity Limitations of Aluminium Metal-Organic Frameworks by Oxalic Acid Modulated Synthesis

A modulated synthesis approach based on the chelating properties of oxalic acid (H2 C2 O4 ) is presented as a robust and versatile method to achieve highly crystalline Al-based metal-organic frameworks. A comparative study on this method and the already established modulation by hydrofluoric acid was conducted using MIL-53 as test system. The superior performance of oxalic acid modulation in terms of crystallinity and absence of undesired impurities is explained by assessing the coordination modes of the two modulators and the structural features of the product. The validity of our approach was confirmed for a diverse set of Al-MOFs, namely X-MIL-53 (X=OH, CH3 O, Br, NO2 ), CAU-10, MIL-69, and Al(OH)ndc (ndc=1,4-naphtalenedicarboxylate), highlighting the potential benefits of extending the use of this modulator to other coordination materials.

Group 13 Element Trihalide Complexes of Anionic N-Heterocyclic Carbenes

A series of group 13 complexes of the general type [{(WCA-IDipp)EX3 }Li(solv)] (E=B, Al, Ga, In; X=Cl, Br) that bear an anionic N-heterocyclic carbene ligand with a weakly coordinating borate moiety (WCA-IDipp, WCA=B(C6 F5 )3 and IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) were prepared by the reaction of the respective group 13 trihalides (EX3 ) with the lithium salt [(WCA-IDipp)Li ⋅ toluene]. The molecular structures of the BBr3 , AlCl3 , AlBr3 , GaCl3 and InCl3 adducts were established by X-ray diffraction analyses, revealing the formation of coordination polymers linked by halide-lithium interactions, except for the indium derivative, which consists of isolated [Li(THF)4 ]+ and [(WCA-IDipp)InCl3 ]- ions in the solid state.

In Utero Exposure to Aluminium and Other Neurotoxic Elements in Urban Coastal South African Women at Delivery: An Emerging Concern

Aluminium (Al) is a non-essential neurotoxicant and there is limited information regarding exposure to Al in utero. This study sought to evaluate the in utero exposure to Al in urban South African women, its effects on birth outcomes and possible synergistic effects between Al, essential and neurotoxic elements such as lead (Pb), mercury (Hg) and arsenic (As), as well as a a potential sex-dependent response to these elements in neonates. This study has found elevated levels of Al in urban women at delivery. The Spearman’s rank correlation coefficients (p-value) of the association between maternal serum Al and birth outcomes (gestational age and parity), and between maternal serum Al and Cu, Zn and Se, were statistically significant. However, in the general and the stratified models, no association was found between any of the birth outcomes and maternal serum Al. The association between maternal serum Al and neurotoxic elements at delivery showed a significant positive correlation for Pb only (rho = 0.361; p < 0.001) which was found to be sex-dependent in neonates (males, rho = 0.285; p < 0.004 and females, rho = 0.444, p < 0.001). Our preliminary findings indicate that in utero exposure to Al is an emerging concern requiring further research and directives from public health authorities.

Quantum chemical molecular dynamics and metadynamics simulation of aluminium binding to amyloid-β and related peptides

We report semi-empirical tight-binding simulations of the interaction between Al(III) and biologically relevant peptides. The GFN2-XTB method is shown to accurately reproduce previously reported and density functional theory (DFT)-calculated geometries of model systems. Molecular dynamics simulations based on this method are able to sample peptide flexibility over timescales of up to nanoseconds, but these timescales are insufficient to explore potential changes in metal-peptide binding modes. To achieve this, metadynamics simulations using root mean square deviation as a collective variable were employed. With suitably chosen biasing potentials, these are able to efficiently explore diverse coordination modes, for instance, through Glu and/or Asp residues in a model peptide. Using these methods, we find that Al(III) binding to the N-terminal sequence of amyloid-β is highly fluxional, with all acidic sidechains and several backbone oxygens participating in coordination. We also show that such simulations could provide a means to predict a priori possible binding modes as a precursor to longer, atomistic simulations.

Microwave photon detection by an Al Josephson junction

An aluminium Josephson junction (JJ), with a critical current suppressed by a factor of three compared with the maximal value calculated from the gap, is experimentally investigated for application as a threshold detector for microwave photons. We present the preliminary results of measurements of the lifetime of the superconducting state and the probability of switching by a 9 GHz external signal. We found an anomalously large lifetime, not described by the Kramers' theory for the escape time over a barrier under the influence of fluctuations. We explain it by the phase diffusion regime, which is evident from the temperature dependence of the switching current histograms. Therefore, phase diffusion allows for a significant improvement of the noise immunity of a device, radically decreasing the dark count rate, but it will also decrease the single-photon sensitivity of the considered threshold detector. Quantization of the switching probability tilt as a function of the signal attenuation for various bias currents through the JJ is observed, which resembles the differentiation between N and N + 1 photon absorption.

Variation of Aluminium Distribution in Small-Sized ZSM-5 Crystals during Desilication

Hollow ZSM-5 zeolites of size below one micrometer can be produced by desilication of crystals with aluminium zoning. The parent crystals have a core-shell structure: the core part has nearly no aluminium, whereas the aluminium content in the shell increases when extending to exterior surface. Transmission electron microscopy confirmed the preservation of the crystalline shell after base leaching, but could not identify its subtle change. An increase of the Si/Al ratio of the surface was detected upon leaching the parent material to form the hollow zeolite by using ambient pressure X-ray photoelectron spectroscopy and infrared spectroscopy of substituted alkylpyridines. ²⁷ Al MAS NMR showed that base leaching results in a reduced percentage of distorted tetrahedrally coordinated aluminium. The reprecipitation of dissolved species occurs and tetrahedrally coordinated tin atoms can thus be introduced to the shell framework. Overall, the formation of hollow ZSM-5 zeolites by desilication involves not only the removal of silicon-rich core, but also a reduced percentage of exterior aluminium-related acid sites, which should be considered while using hollow zeolites in acid-catalyzed reactions.

Accelerated lung function decline in an aluminium manufacturing industry cohort exposed to PM2.5: an application of the parametric g-formula

OBJECTIVE

Occupational dust exposure has been associated with accelerated lung function decline, which in turn is associated with overall morbidity and mortality. In the current study, we assess potential benefits on lung function of hypothetical interventions that would reduce occupational exposure to fine particulate matter (PM_2.5) while adjusting for the healthy worker survivor effect.

METHODS

Analyses were performed in a cohort of 6485 hourly male workers in an aluminium manufacturing company in the USA, followed between 1996 and 2013. We used the parametric g-formula to assess lung function decline over time under hypothetical interventions while also addressing time-varying confounding by underlying health status, using a composite risk score based on health insurance claims.

RESULTS

A counterfactual scenario envisioning a limit on exposure equivalent to the 10th percentile of the observed exposure distribution of 0.05 mg/m³ was associated with an improvement in forced expiratory volume in one second (FEV₁) equivalent to 37.6 mL (95% CI 13.6 to 61.6) after 10 years of follow-up when compared with the observed. Assuming a linear decrease and (from NHANES reference values), a 20 mL decrease per year for a 1.8 m-tall man as they age, this 37.6 mL FEV₁ loss over 10 years associated with observed exposure would translate to approximately a 19% increase to the already expected loss per year from age alone.

CONCLUSIONS

Our results indicate that occupational PM_2.5 exposure in the aluminium industry accelerates lung function decline over age. Reduction in exposure may mitigate accelerated loss of lung function over time in the industry.

Numerical Modelling of the Ultrasonic Treatment of Aluminium Melts: An Overview of Recent Advances

The prediction of the acoustic pressure field and associated streaming is of paramount importance to ultrasonic melt processing. Hence, the last decade has witnessed the emergence of various numerical models for predicting acoustic pressures and velocity fields in liquid metals subject to ultrasonic excitation at large amplitudes. This paper summarizes recent research, arguably the state of the art, and suggests best practice guidelines in acoustic cavitation modelling as applied to aluminium melts. We also present the remaining challenges that are to be addressed to pave the way for a reliable and complete working numerical package that can assist in scaling up this promising technology.

Aluminium toxicosis: a review of toxic actions and effects

Aluminium (Al) is frequently accessible to animal and human populations to the extent that intoxications may occur. Intake of Al is by inhalation of aerosols or particles, ingestion of food, water and medicaments, skin contact, vaccination, dialysis and infusions. Toxic actions of Al induce oxidative stress, immunologic alterations, genotoxicity, pro-inflammatory effect, peptide denaturation or transformation, enzymatic dysfunction, metabolic derangement, amyloidogenesis, membrane perturbation, iron dyshomeostasis, apoptosis, necrosis and dysplasia. The pathological conditions associated with Al toxicosis are desquamative interstitial pneumonia, pulmonary alveolar proteinosis, granulomas, granulomatosis and fibrosis, toxic myocarditis, thrombosis and ischemic stroke, granulomatous enteritis, Crohn's disease, inflammatory bowel diseases, anemia, Alzheimer's disease, dementia, sclerosis, autism, macrophagic myofasciitis, osteomalacia, oligospermia and infertility, hepatorenal disease, breast cancer and cyst, pancreatitis, pancreatic necrosis and diabetes mellitus. The review provides a broad overview of Al toxicosis as a background for sustained investigations of the toxicology of Al compounds of public health importance.

Ion release of chitosan and nanodiamond modified glass ionomer restorative cements

Purpose

Ion release from glass ionomer restorative cements (GICs) plays an important role in GICs. The ion release from chitosan and nanodiamond-modified glass ionomers was assessed.

Materials and methods

Three GICs (Fuji IX, Ketac Universal and Riva Self Cure) were modified in the powder phase per weight by adding 5% or 10% of a commercially available chitosan powder (CH) or nanodiamond (ND) powder to the GICs. The specimens with dimensions 4 mm diameter and 6 mm height manufactured from the 15 GIC formulations were allowed to set for 1 hr and subsequently placed in neutral de-ionised water. The released ions were assessed using inductively coupled plasma-mass spectrometer (ICP-MS) to determine the elemental release. Additionally, three different disc-shaped specimens (3 mm in diameter and 1 mm thick) were constructed from each material for scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (SEM-EDS) microanalysis to establish an ion weight percentage.

Results

There were no significant differences in the ion release between the control materials for aluminium, silicon and strontium. The ion release from CH and most ND-modified GICs were significantly (p<0.00001) increased compared to the control materials. CH modifications significantly increased the ion release of aluminium, sodium, silicon and strontium for all three control materials (with the exception of the strontium release from Ketac Universal that was modified with 5% chitosan).

Conclusion

Ion release can be advantageous to tooth structure due to the interaction of chitosan with the GIC chemistry and moisture during maturation. Ion release up to five times greater than the control was noted for some ions.

Phase Equilibria in the Nb-Rich Region of Al-Nb-Sn at 900 and 1200 °C

The Al-Nb-Sn phase diagram was studied experimentally in the Nb-rich region to provide important phase equilibria information for alloy design of Nb-silicide based materials for aero engine applications. Three alloys were produced: Nb-17Al-17Sn, Nb-33Al-13Sn and Nb-16Al-20Sn (at.%). As-cast and heat-treated alloys (900 and 1200 °C) were analysed using XRD (X-ray diffraction) and SEM/EDS (scanning electron microscopy/ electron dispersive x-ray spectroscopy). Tin showed a high solubility in Nb₂Al, reaching up to 21 at.% in the Sn-rich areas, substituting for Al atoms. Tin and Al also substituted for each other in the A15 phases (Nb₃Al and Nb₃Sn). Tin showed limited solubility in NbAl₃, not exceeding 3.6 at.% as it substituted Al atoms. The solubility of Al in NbSn₂ varied from 4.8 to 6.8 at.%. A ternary phase, Nb₅Sn₂Al with the tI32 W₅Si₃ crystal structure, was found to be stable. This phase was observed in the 900 °C heat-treated samples, but not in the 1200 °C heated samples.

Synthesis, crystal structures, photoluminescence, electrochemistry and DFT study of aluminium(III) and gallium(III) complexes containing a novel tetradentate Schiff base ligand

Single crystals of the aluminium and gallium complexes of 6,6'-{(1E,1'E)-[1,2-phenylenebis(azanylylidene)]bis(methanylylidene)}bis(2-methoxyphenol), namely diaqua(6,6'-{(1E,1'E)-[1,2-phenylenebis(azanylylidene)]bis(methanylylidene)}bis(2-methoxyphenolato)-κ⁴O¹,N,N',O^1')aluminium(III) nitrate ethanol monosolvate, [Al(C₂₂H₁₈N₂O₄)(H₂O)₂]NO₃·C₂H₅OH, 1, and diaqua(6,6'-{(1E,1'E)-[1,2-phenylenebis(azanylylidene)]bis(methanylylidene)}bis(2-methoxyphenolato)-κ⁴O¹,N,N',O^1')gallium(III) nitrate ethanol monosolvate, [Ga(C₂₂H₁₈N₂O₄)(H₂O)₂]NO₃·C₂H₅OH, 2, were obtained after successful synthesis in ethanol. Both complexes crystallized in the triclinic space group P-1, with two molecules in the asymmetric unit. In both structures, in one of the independent molecules the tetradentate ligand is almost planar while in the other independent molecule the ligand shows significant distortions from planarity, as illustrated by the largest distance from the plane constructed through the central metal atom and the O,N,N',O'-coordinating atoms of the ligand in 1 of 1.155 (3) Å and a distance of 1.1707 (3) Å in 2. The possible reason for this is that there are various strong π-interactions in the structures. This was confirmed by density functional theory (DFT) calculations, as were the other crystallographic data. DFT was also used to predict the outcome of cyclic voltammetry experiments. Ligand oxidation is more stabilized in the gallium complex. Solid-state photoluminescence gave an 80 nm red-shifted spectrum for the gallium complex, whereas the aluminium complex maintains the ligand curve with a smaller red shift of 40 nm.

Surface Effects and Optical Properties of Self-Assembled Nanostructured a-Si:Al

We present a study of the surface effects and optical properties of the self-assembled nanostructures comprised of vertically aligned 5 nm-diameter Al nanowires embedded in an amorphous Si matrix (a-Si:Al). The controlled (partial) removal of Al nanowires in a selective etching process yielded nanoporous a-Si media with a variable effective surface area. Different spectroscopy techniques, such as X-ray photoelectron spectroscopy (XPS), UV-Vis spectrophotometry and photoluminescence (PL), have been combined to investigate the impact of such nanostructuring on optical absorption and emission properties. We also examine long-term exposure to air ambient and show that increasing level of surface oxidation determines the oxide defect-related nature of the dominant PL emission from the nanoporous structures. The role of bulk, nanosize and surface effects in optical properties has been separated and quantified, providing a better understanding of the potential of such nanoporous a-Si:Al structures for future device developments.

The rich crystal chemistry of the AMM'(PO4)2 morphotropic series: NaZnAl(PO4)2, the first Na representative with a new structure type

A novel phosphate, sodium zinc aluminium bis(phosphate), NaZnAl(PO₄)₂, was obtained under mild-temperature hydrothermal conditions at 553 K. The crystal structure has been studied using single-crystal X-ray experimental data. The pseudo-hexagonal phase NaZnAl(PO₄)₂ crystallizes in the monoclinic space group P2₁/c. Its unique crystal structure is based on a three-dimensional (3D) framework built by Zn-, Al- and P-centred tetrahedra sharing vertices. Channels parallel to the [101] and [-101] directions are limited by six- and eight-membered windows, and incorporate Na atoms. The new compound is discussed as a member of the morphotropic series AMM'PO₄, where A = Na, K, Rb or NH₄, M = Cu, Ni, Co, Fe, Zn or Mg and M' = Fe, Al or Ga. The title compound is the first Na representative within the series and is characterized by a 3D architecture of tetrahedra populated in an ordered manner by Zn²⁺, Al³⁺ and P⁵⁺ ions.

A multi-level response to DNA damage induced by aluminium

Aluminium (Al) ions are one of the primary growth-limiting factors for plants on acid soils, globally restricting agriculture. Despite its impact, little is known about Al action in planta. Earlier work has indicated that, among other effects, Al induces DNA damage. However, the loss of major DNA damage response regulators, such SOG1, partially suppressed the growth reduction in plants seen on Al-containing media. This raised the question whether Al actually causes DNA damage and, if so, how. Here, we provide cytological and genetic data corroborating that exposure to Al leads to DNA double-strand breaks. We find that the Al-induced damage specifically involves homology-dependent (HR) recombination repair. Using an Al toxicity assay that delivers higher Al concentrations than used in previous tests, we find that sog1 mutants become highly sensitive to Al. This indicates a multi-level response to Al-induced DNA damage in plants.

Changes in Metal Ion Concentrations in a Chardonnay Wine Related to Oxygen Exposure during Vinification

The impact of oxygen exposure during winemaking on metal ion concentrations in wine were investigated throughout the winemaking process in a Chardonnay wine. The concentrations of Al, Ca, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Sn, and Zn were determined using inductively coupled plasma-mass spectrometry. Oxygen exposure significantly impacted 13 metal ions at different phases of winemaking. However, only the concentrations of Cr, Cu, and Fe were impacted by early oxygen exposure during pressing, with lower Cr and Cu concentrations in wines that were aerobically pressed and lower concentrations of Fe in wines that were inertly pressed. The sequestering of Al, Cu, Ni, and Zn by wine lees was significantly affected by oxygen treatment, with lees collected from wines that were treated oxidatively sequestering significantly greater amounts of Cu and Zn and removing these metals from the wine supernatant. The metal ion that was most affected by oxygen exposure during pressing and handling was Cu, with significantly lower Cu measured in wines that were produced under oxidative conditions. It is known that elevated Cu concentrations have negative implications for wine aroma and flavour. This study demonstrated that oxygen management during winemaking significantly impacts metal ion concentrations in lees and wine, which may decrease the risk of developing taints and faults.

Crystal structure of bis(μ2-tri-phenyl-acetato-κO:κO')bis(diisobutylaluminium)

Single crystals of the title compound, [Al(iBu)2(O2CCPh3)]2 or [Al2(C4H9)4(C20H15O2)2], have been formed in the reaction between tris-(tetra-hydro-furan)-tris-(tri-phenyl-acetato)-neodymium, [Nd(Ph3CCOO)3(THF)3], and triiso-butyl-aluminium, Al(iBu)3, in hexane followed by low-temperature crystallization (243 K) from the reaction mixture. The structure has triclinic (P ) symmetry at 120 K. The dimeric complex [Al(iBu)2(O2CCPh3-μ-κO:κO')]2 is located about an inversion centre. The tri-phenyl-acetate ligand displays a μ-κO:κO'-bridging coordination mode, leading to the formation of an octa-gonal Al2O4C2 core. The complex displays HPh⋯CPh inter-molecular inter-actions.

[Survey of Aluminium Content of Processed Food Using Baking Powder (2015-2016)]

The aluminium (Al) content of Japanese confectionery and foods containing flour was investigated. Some of these items were investigated in previous studies, which examined foods that made use of baking powder containing aluminium potassium sulfate (Alum). Al was detected in 41 of the 123 samples at levels ranging from 0.01 (limit of quantitation) to 0.40 mg/g. The detection rate of Al in almost all confectionery (except Japanese confectionery) was decreased as compared with previous studies. However, the detection rate of Al in Japanese confectionery and foods containing flour was high. For 4 of the 41 samples tested, consuming one serving once a week would result in an Al intake exceeding the PTWI for young children (body weight=16 kg).

Changes in the Distribution of Pectin in Root Border Cells Under Aluminum Stress

Root border cells (RBCs) surround the root apices in most plant species and are involved in the production of root exudates. We tested the relationship between pectin content in root tips and aluminum (Al) tolerance by comparing these parameters in wild-type (WT) and sensitive-to-Al-rhizotoxicity (star1) mutant rice plants. Staining for demethylesterified pectin decreased after Al treatment in the WT. A high level of pectin was observed in RBCs of the root tips. The level of total pectin was increased by about 50% compared with the control. In the Al-sensitive star1 mutant, Al treatment decreased root elongation and pectin content, especially in RBCs. In addition, almost no Al accumulation was observed in the control, whereas more Al was accumulated in the RBCs of STAR1 roots. These results show that the amount of pectin influences Al tolerance; that Al accumulation in rice roots is reduced by the distribution of pectin in root-tip RBCs; and that these reactions occur in the field around the RBCs, including the surrounding mucilage. Al accumulation in rice roots is reduced by the distribution of pectin in root tips, and pectin in the root cell walls contributes to the acquisition of Al tolerance in rice by regulating its distribution. The release of Al-binding mucilage by RBCs could play a role in protecting root tips from Al-induced cellular damage.

Crystal structure of bis-(μ2-meth-anolato-κO:κO)hexa-methyl-bis-(μ2-tri-phenyl-acetato-κO:κO')bis-(μ2-tri-phenyl-acetato-κ2 O,O':κO)dialuminiumdi-lanthanum toluene tetra-solvate

The title compound, [Al2La2(C20H15O2)4(CH3)6(CH3O)2]·4CH3C6H5 or [{La(Ph3CCOO)2(Me3AlOMe)}2]·4CH3C6H5, was formed in a reaction between lanthanum tris-(tetra-methyl-aluminate) and tri-phenyl-acetic acid (1:1) with unintended partial oxidation. The tri-phenyl-acetate ligand exhibits μ2-κ1 O:κ1 O' bridging and μ2-κ2 O,O':κ1 O semi-bridging coordination modes, forming a dimeric La2(μ-OCO)4 core. The semi-bridging tri-phenyl-acetate group provides additional bonding with an La3+ cation via the π-system of one of its phenyl rings. The tri-methyl-meth-oxy-aluminate anion, which is coordinated to the La3+ cation by its O atom, displays a rather long La-CMe bond. Two toluene mol-ecules are each disordered over two orientations about centres of symmetry with site occupancy factors of 0.5. The title compound represents the first example of an LnIII complex containing both alkyl alkoxide aluminate and π-bounded arene fragments.

Aluminates with Fluorinated Schiff Bases: Influence of the Alkali Metal⁻Fluorine Interactions in Structure Stabilization

New heterometallic aluminium-alkali metal compounds have been prepared using Schiff bases with electron withdrawing substituents as ligands. The synthesis of these new species was achieved via the reaction of AlMe₃ with the freshly prepared alkali-metallated ligand. The derivatives formed were characterized by NMR in solution and by single crystal X-ray diffraction in the solid state. Aluminate derivatives with lithium and sodium were prepared and a clear influence of the alkali metal in the final outcome is observed. The presence of a Na···F interaction in the solid state has a stabilization effect and the species [NaAlMe₃L]₂ can de isolated for the first time, which was not possible when using Schiff bases without electron withdrawing substituents as ligands.

Photosystem II Is More Sensitive than Photosystem I to Al3+ Induced Phytotoxicity

Aluminium (Al) the most abundant metal in the earth's crust is toxic in acid soils (pH < 5.5) mainly in the ionic form of Al3+ species. The ability of crops to overcome Al toxicity varies among crop species and cultivars. Here, we report for a first time the simultaneous responses of photosystem II (PSII) and photosystem I (PSI) to Al3+ phytotoxicity. The responses of PSII and PSI in the durum wheat (Triticum turgidum L. cv. 'Appulo E') and the triticale (X Triticosecale Witmark cv. 'Dada') were evaluated by chlorophyll fluorescence quenching analysis and reflection spectroscopy respectively, under control (-Al, pH 6.5) and 148 μM Al (+Al, pH 4.5) conditions. During control growth conditions the high activity of PSII in 'Appulo E' led to a rather higher electron flow to PSI, which induced a higher PSI excitation pressure in 'Appulo E' than in 'Dada' that presented a lower PSII activity. However, under 148 μM Al the triticale 'Dada' presented a lower PSII and PSI excitation pressure than 'Appulo E'. In conclusion, both photosystems of 'Dada' displayed a superior performance than 'Appulo E' under Al exposure, while in both cultivars PSII was more affected than PSI from Al3+ phytotoxicity.

Experimental Parametric Model for Adhesion Wear Measurements in the Dry Turning of an AA2024 Alloy

Adhesion wear is the main wear mechanism in the dry turning of aluminium alloys. This type of wear produces an adhesion of the machining material on the cutting tool, decreasing the final surface quality of the machining parts and making it more difficult to maintain industrial tolerances. This work studies the influence of the cutting parameters on the volume of material adhered to the cutting tool surface for dry machining of AA2024 (Al-Cu). For that purpose, a specific methodology based on the automatic image processing method that can obtain the area and the thickness of the adhered material has been designed. This methodology has been verified with the results obtained through 3D analysis techniques and compared with the adhered volume. The results provided experimental parametric models for this wear mechanism. These models are analytic approximations of experimental data. The feed rate mainly results in low cutting speed, while low depths of cut presents a different behaviour due to the low contact pressure. The unstable behaviour of aluminium adhesion on the cutting tool produces a high variability of results. This continuous change introduces variation in the process caused by the continuous change of the cutting tool geometry.

The response of soil solution chemistry in European forests to decreasing acid deposition

Acid deposition arising from sulphur (S) and nitrogen (N) emissions from fossil fuel combustion and agriculture has contributed to the acidification of terrestrial ecosystems in many regions globally. However, in Europe and North America, S deposition has greatly decreased in recent decades due to emissions controls. In this study, we assessed the response of soil solution chemistry in mineral horizons of European forests to these changes. Trends in pH, acid neutralizing capacity (ANC), major ions, total aluminium (Al_tot ) and dissolved organic carbon were determined for the period 1995-2012. Plots with at least 10 years of observations from the ICP Forests monitoring network were used. Trends were assessed for the upper mineral soil (10-20 cm, 104 plots) and subsoil (40-80 cm, 162 plots). There was a large decrease in the concentration of sulphate (SO42-) in soil solution; over a 10-year period (2000-2010), SO42- decreased by 52% at 10-20 cm and 40% at 40-80 cm. Nitrate was unchanged at 10-20 cm but decreased at 40-80 cm. The decrease in acid anions was accompanied by a large and significant decrease in the concentration of the nutrient base cations: calcium, magnesium and potassium (Bc = Ca²⁺  + Mg²⁺  + K⁺ ) and Al_tot over the entire dataset. The response of soil solution acidity was nonuniform. At 10-20 cm, ANC increased in acid-sensitive soils (base saturation ≤10%) indicating a recovery, but ANC decreased in soils with base saturation >10%. At 40-80 cm, ANC remained unchanged in acid-sensitive soils (base saturation ≤20%, pHCaCl2 ≤ 4.5) and decreased in better-buffered soils (base saturation >20%, pHCaCl2 > 4.5). In addition, the molar ratio of Bc to Al_tot either did not change or decreased. The results suggest a long-time lag between emission abatement and changes in soil solution acidity and underline the importance of long-term monitoring in evaluating ecosystem response to decreases in deposition.

Re-evaluation of aluminium sulphates (E 520-523) and sodium aluminium phosphate (E 541) as food additives

The Panel on Food Additives and Nutrient Sources added to Food (ANS) provided a scientific opinion re‐evaluating the safety of aluminium sulphates (E 520–523) and sodium aluminium phosphate, acidic (E 541) as food additives. The Panel considered that adequate exposure and toxicity data were available. Aluminium sulphates (E 520–523) and sodium aluminium phosphate, acidic (E 541) are permitted as food additives in only a few specific products and the exposure is probably near zero. Aluminium compounds have low bioavailability and low acute toxicity. There is no concern with respect to genotoxicity and carcinogenicity. The no observed adverse effect level (NOAEL) for aluminium compounds in subchronic studies was 52 mg Al/kg body weight (bw) per day in rats and 90 mg Al/kg bw per day in dogs and the lowest NOAEL for neurotoxicity in rats was 30 mg Al/kg bw per day and for developing nervous system was 10–42 mg Al/kg bw per day in studies in mice and rats. The Panel concluded that aluminium sulphates (E 520–523) and sodium aluminium phosphate, acidic (E 541) are of no safety concern in the current authorised uses and use levels.

An Anionic Aluminium Nucleophile

The first stable anionic aluminium nucleophile was isolated by Goicoechea, Aldridge and co-workers. The aluminyl compound showed very high reactivity in metathesis reactions as well as in the oxidative addition of substrates such as dihydrogen and benzene, which opens up new perspectives in main group chemistry.

Atypical aluminium patch tests in children with persistent itching postvaccinal nodules

Persistent itching nodules related to aluminium-adsorbed vaccines are well known in children with frequent positive patch tests to aluminium when tested. We report two cases of children with persistent postvaccination nodules who presented with atypical eruptions after aluminium patch tests.

Large variation in glyphosate mineralization in 21 different agricultural soils explained by soil properties

Glyphosate and its main metabolite aminomethylphosphonic acid (AMPA) have frequently been detected in surface water and groundwaters. Since adequate glyphosate mineralization in soil may reduce its losses to environment, improved understanding of site specific factors underlying pesticide mineralization in soils is needed. The aim of this study was to investigate the relationship between soil properties and glyphosate mineralization. To establish a sound basis for resilient correlations, the study was conducted with a large number of 21 agricultural soils, differing in a variety of soil parameters, such as soil texture, soil organic matter content, pH, exchangeable ions etc. The mineralization experiments were carried out with ¹⁴C labelled glyphosate at a soil water tension of -15 kPa and at a soil density of 1.3 g cm^-3 at 20 ± 1 °C for an incubation period of 32 days. The results showed that the mineralization of glyphosate in different agricultural soils varied to a great extent, from 7 to 70% of the amount initially applied. Glyphosate mineralization started immediately after application, the highest mineralization rates were observed within the first 4 days in most of the 21 soils. Multiple regression analysis revealed exchangeable acidity (H⁺ and Al³⁺), exchangeable Ca²⁺ ions and ammonium lactate extractable K to be the key soil parameters governing glyphosate mineralization in the examined soils. A highly significant negative correlation between mineralized glyphosate and NaOH-extractable residues (NaOH-ER) in soils strongly suggests that NaOH-ER could be used as a simple and reliable parameter for evaluating the glyphosate mineralization capacity. The NaOH-ER were composed of glyphosate, unknown ¹⁴C-residues, and AMPA (12%-65%, 3%-34%, 0%-11% of applied ¹⁴C, respectively). Our results highlighted the influential role of soil exchangeable acidity, which should therefore be considered in pesticide risk assessments and management to limit efficiently the environmental transfers of glyphosate.

Harmful Elements (Al, Cd, Cr, Ni, and Pb) in Wild Berries and Fruits Collected in Croatia

Fruits and vegetables are considered a beneficial contribution to the human diet. Especially, berries contain a great deal of bioactive compounds, such as anthocyanins, organic acids, tannins, phenols, and antioxidants. Apart from organic substances, inorganic nutrients are also present in fruits. Some metals and metalloids are essential for humans, whilst others may exhibit harmful effects. Wild grown berries, collected in so-called unpolluted areas, are considered to be free of any potentially toxic ingredients. However, due to transmission processes pollutants can also reach remote areas and, furthermore, metal uptake from the soil via roots has to be taken into account. Thus, the presented study focused on the determination of Al, Cd, Cr, Ni, and Pb in lingonberries, blueberries, and rose hips collected in a non-polluted area in Croatia. Neither Cd nor Cr could be found in any sample. Ni levels were mainly up to 25 mg/kg, in a comparable range to the literature data. No health threat is to be expected by eating these fruits and berries regarding Cd, Cr, and Ni. Rose hips, however, contain Pb beyond the stipulated limit in fruits, and also Al is present at a high level (8 mg/g).

M+M3+2As(HAsO4)6 and α- and β-M+M3+(HAsO4)2 (M+M3+ = RbAl or CsFe): six new compounds crystallizing in three closely related structure types

The crystal structures of hydrothermally synthesized (T = 493 K, 7-9 d) rubidium aluminium bis[hydrogen arsenate(V)], RbAl(HAsO₄)₂, caesium iron bis[hydrogen arsenate(V)], CsFe(HAsO₄)₂, rubidium dialuminium arsenic(V) hexakis[hydrogen arsenate(V)], RbAl₂As(HAsO₄)₆, and caesium diiron arsenic(V) hexakis[hydrogen arsenate(V)], CsFe₂As(HAsO₄)₆, were solved by single-crystal X-ray diffraction. The four compounds with the general formula M⁺M³⁺(HAsO₄)₂ adopt the RbFe(HPO₄)₂ structure type (R-3c) and a closely related new structure type, which is characterized by a different stacking order of the building units, leading to noncentrosymmetric space-group symmetry R32. The second new structure type, with the general formula M⁺M³⁺₂As(HAsO₄)₆ (R-3c), is also a modification of the RbFe(HPO₄)₂ structure type, in which one third of the M³⁺O₆ octahedra are replaced by AsO₆ octahedra, and two thirds of the voids in the structure, which are usually filled by M⁺ cations, remain empty to achieve charge balance.

LiAlH4 : From Stoichiometric Reduction to Imine Hydrogenation Catalysis

Imine-to-amine conversion with catalytic instead of stoichiometric quantities of LiAlH₄ is demonstrated (85 °C, catalyst loading≥2.5 mol %, pressure≥1 bar). The effects of temperature, pressure, solvent, and catalyst modifications, as well as the substrate scope are discussed. Experimental investigations and preliminary DFT calculations suggest that the catalytically active species is generated in situ: LiAlH₄ +Ph(H)C=NtBu→LiAlH₂ [N(tBu)CH₂ Ph]₂ . A cooperative mechanism in which Li and Al both play a prominent role is proposed.

Phenoxide and alkoxide complexes of Mg, Al and Zn, and their use for the ring-opening polymerization of ℇ-caprolactone with initiators of different natures

A new packing polymorph of bis(2,6-di-tert-butyl-4-methylphenolato-κO)bis(tetrahydrofuran-κO)magnesium, [Mg(C₁₅H₂₃O)₂(C₄H₈O)₂] or Mg(BHT)₂(THF)₂, (BHT is the 2,6-di-tert-butyl-4-methylphenoxide anion and THF is tetrahydrofuran), (1), has the same space group (P2₁) as the previously reported modification [Nifant'ev et al. (2017d). Dalton Trans. 46, 12132-12146], but contains three crystallographically independent molecules instead of one. The structure of (1) exhibits rotational disorder of the tert-butyl groups and positional disorder of a THF ligand. The complex of bis(2,6-di-tert-butyl-4-methylphenolato-κO)bis(μ₂-ethyl glycolato-κ²O,O':κO)dimethyldialuminium, [Al₂(CH₃)₂(C₄H₇O₃)₂(C₁₅H₂₃O)₂] or [(BHT)AlMe(OCH₂COOEt)]₂, (2), is a dimer located on an inversion centre and has an Al₂O₂ rhomboid core. The 2-ethoxy-2-oxoethanolate ligand (OCH₂COOEt) displays a μ₂-κ²O,O':κO semi-bridging coordination mode, forming a five-membered heteronuclear Al-O-C-C-O ring. The same ligand exhibits positional disorder of the terminal methyl group. The redetermined structure of the heptanuclear complex octakis(μ₃-benzyloxo-κO:κO:κO)hexaethylheptazinc, [Zn₇(C₂H₅)₆(C₇H₇O)₈] or [Zn₇(OCH₂Ph)₈Et₆], (3), possesses a bicubic Zn₇O₈ core located at an inversion centre and demonstrates positional disorder of one crystallographically independent phenyl group. Cambridge Structural Database surveys are given for complexes structurally analogous to (2) and (3). Complexes (2) and (3), as well as derivatives of (1), are of interest as catalysts for the ring-opening polymerization of ℇ-caprolactone, and polymerization results are reported.

Comparison of total ionic strength adjustment buffers III and IV in the measurement of fluoride concentration of teas

Background:

Tea is the second most consumed drink in the UK and a primary source of hydration; it is an important source of dietary fluoride (F) for consumers and also abundant in aluminium (Al). Varying ranges of F concentrations in teas have been reported worldwide which may be, in part, due to differences in analytical techniques used to measure this ion.

Aim:

The effect of using total ionic adjustment buffers (TISAB) III or IV when measuring F concentration of black teas available in the UK was investigated and compared. Based on this evaluation, the effects of three different infusion times, 1 min, 10 min and 1 h, caffeine content and tea form on the F contents of the tea samples were investigated.

Methods:

The F concentrations of 47 tea samples were measured directly using a fluoride ion-selective electrode (F-ISE), TISAB III and IV and infusion times of 1 min, 10 min and 1 h.

Results:

Mean (SD) F concentration of tea samples for all infusion times was statistically significantly higher (p < 0.001) measured by TISAB IV (4.37 (2.16) mg/l) compared with TISAB III (3.54 (1.65) mg/l). A statistically significant positive correlation (p < 0.001) was found between Al concentration (mg/l) and differences in F concentration (mg/l) measured using the two TISABs; the difference in F concentration measured by the two TISABs increased with the magnitude of Al concentration.

Conclusion:

Due to higher concentrations of F and Al in teas and their complexing potential, use of TISAB IV facilitates more accurate measurement of F concentration when using an F-ISE and a direct method.

[Assessment on exposure of dietary aluminium among residents in Shaanxi Province during 2013-2015]

OBJECTIVE

To investigate the contamination condition of the aluminium in commercial foods in Shaanxi Province, and evaluate aluminium dietary intake level in Shaanxi population and its potential health risks.

METHODS

1331 samples in Shaanxi Province were collected from 2013 to 2015. The aluminium contents were detected by National Food Contamination and Harmful Factors in Risk Monitoring Manual, and data of total diet study in Shaanxi Province in 2007, to calculate dietary intake of aluminium in Shaanxi population.

RESULTS

Average dietary intake of aluminium was 0. 358 mg/( kg·d), accounted for 125% of PTWI. The dietary intake of aluminium in children aged 2 to7 years old was highest, followed children aged 8 to 12 years old and men aged 13 to 19 years old. Grain products and potato products were the main sources of aluminium exposure compared with others.

CONCLUSION

The dietary intake of aluminium in Shaanxi population is more than the PTWI. The children aged 2 to 7 years old, children aged 8 to12 years old and men aged 13 to 19 years old is high. Grain products and potato products are the main sources of aluminium exposure in Shaanxi population. The effective measureto control the intake of aluminium is to normalize and rationalize the use of additives containing aluminium.

Identification of toxic metals in human embryonic tissues

INTRODUCTION

The cause of a significant number of miscarriages remains unexplained. There is a need to identify the potential role of environmental, dietary and lifestyle factors in the risk of pregnancy loss. The present study was the first to investigate the content of miscarried embryonic material with respect to eight metals (aluminium, cadmium, chromium, copper, manganese, nickel, lead and zinc).

MATERIAL AND METHODS

Embryonic tissue samples (n = 20) were obtained from women undergoing misoprostol-induced removal of the embryo between the 6^th and 9^th week of gestation. The content of metals was analyzed using microwave-induced nitrogen plasma atomic emission spectrometry. Based on a short questionnaire, the smoking habits, dietary patterns and place of living of the investigated women were determined.

RESULTS

The general mean content of metals (μg/g) decreased in the order copper (33.9) > manganese (24.7) > chromium (13.6) > zinc (13.3) > aluminium (6.5) > nickel (3.0) > lead (2.9) > cadmium (2.5). Profoundly increased concentrations (p < 0.05) of the toxic elements aluminium (over 5-fold), cadmium (over 2-fold) and lead (over 2-fold) were observed in samples obtained from former smoking women. The miscarried material in urban populations also revealed higher levels of cadmium (over 1.5-fold) and lead (over 2-fold) compared to that obtained from women living in rural areas (p < 0.05). No associations with age or diet were found (p > 0.05).

CONCLUSIONS

This study identified increased levels of aluminum, cadmium and lead in miscarried embryonic material and suggests some causative factors.

[4-tert-Butyl-2,6-bis-(di-phenyl-meth-yl)phenolato-κO]dieth-yl(tetra-hydro-furan-κO)aluminium

The title compound, {Al[O-2,6-(Ph2CH)2-4- t BuC6H2]Et2(THF)} or [Al(C2H5)2(C36H33O)(C4H8O)], was formed in the reaction between 4-tert-butyl-2,6-bis-(di-phenyl-meth-yl)phenol and tri-ethyl-aluminum in the presence of THF (THF is tetra-hydro-furan) and recrystallized from hexane. The structure has monoclinic (P21/n) symmetry with a single Al atom in the asymmetric unit. The terminal C atom of one ethyl substituent is nearly equally disordered over two positions. The complex possesses catalytic activity in the ring-opening polymerization of ∊-caprolactone.

Crystal structure and quantum-chemical calculations of a tri-methyl-aluminium-THF adduct

The title compound, trimeth-yl(tetra-hydro-furan-κO)aluminium(III), [Al(CH3)3(C4H8O)], is an addition product of tri-methyl-aluminium and tetra-hydro-furan (THF). Instead of a dimeric structure, which is very common for these types of compounds, a monomeric mol-ecular structure is observed. The C-Al-C angles in the mol-ecule are very different from the C-Al-C angles found in dimeric mol-ecular structures, leading to a different symmetry around the AlIII atom. The reasons for these differences are discussed.

Capacitance-Assisted Sustainable Electrochemical Carbon Dioxide Mineralisation

An electrochemical cell comprising a novel dual-component graphite and Earth-crust abundant metal anode, a hydrogen producing cathode and an aqueous sodium chloride electrolyte was constructed and used for carbon dioxide mineralisation. Under an atmosphere of 5 % carbon dioxide in nitrogen, the cell exhibited both capacitive and oxidative electrochemistry at the anode. The graphite acted as a supercapacitive reagent concentrator, pumping carbon dioxide into aqueous solution as hydrogen carbonate. Simultaneous oxidation of the anodic metal generated cations, which reacted with the hydrogen carbonate to give mineralised carbon dioxide. Whilst conventional electrochemical carbon dioxide reduction requires hydrogen, this cell generates hydrogen at the cathode. Carbon capture can be achieved in a highly sustainable manner using scrap metal within the anode, seawater as the electrolyte, an industrially relevant gas stream and a solar panel as an effective zero-carbon energy source.

ICP-MS determination of serum aluminum in monkeys subcutaneously administered an alhydrogel-formulated drug candidate

AIM

To develop and validate an inductively coupled plasma-mass spectrometry method for quantitative bioanalysis of aluminum (Al) in monkey serum in support of a GLP TOX study with alhydrogel-formulated drug candidate.

METHODS & RESULTS

The method was linear over a dynamic range of 10-1000 ng/ml using a 50-μl sample volume. The intra-/inter-run precision (%CV) of the quality control sample results were ≤7.9% (CV) and the accuracy (%bias) within ±11.0% across all quality control concentrations evaluated. Other validation parameters, including stability under various conditions, extraction recovery and matrix effect, all met the acceptance criteria.

CONCLUSION

The validated method was successfully implemented for the quantitative analysis of Al in monkey serum to assess the systemic exposure to Al.

Neutral molecular markers support common origin of aluminium tolerance in three congeneric grass species growing in acidic soils

Aluminium (Al) toxicity is the main abiotic stress limiting plant productivity in acidic soils that are widely distributed among arable lands. Plant species differ in the level of Al resistance showing intraspecific and interspecific variation in many crop species. However, the origin of Al-tolerance is not well known. Three annual species, difficult to distinguish phenotypically and that were until recently misinterpreted as a single complex species under Brachypodium distachyon, have been recently separated into three distinct species: the diploids B. distachyon (2n = 10) and B. stacei (2n = 20), and B. hybridum (2n = 30), the allotetraploid derived from the two diploid species. The aims of this work were to know the origin of Al-tolerance in acidic soil conditions within these three Brachypodium species and to develop new DNA markers for species discrimination. Two multiplex SSR-PCRs allowed to genotype a group of 94 accessions for 17 pentanucleotide microsatellite (SSRs) loci. The variability for 139 inter-microsatellite (ISSRs) markers was also examined. The genetic relationships obtained using those neutral molecular markers (SSRs and ISSRs) support that all Al-tolerant allotetraploid accessions of B. hybridum have a common origin that is related with both geographic location and acidic soils. The possibility that the adaptation to acidic soils caused the isolation of the tolerant B. hybridum populations from the others is discussed. We finally describe a new, easy, DNA barcoding method based in the upstream-intron 1 region of the ALMT1 gene, a tool that is 100 % effective to distinguish among these three Brachypodium species.