Surface and Interface Engineering for Nanocellulosic Advanced Materials

Reactive template method for synthesis of water-soluble fluorescent silver nanoclusters supported on the surface of cellulose nanofibers

There is an emerging quest for fabrication of water-soluble fluorescent silver nanoclusters (AgNCs) with long-lasting fluorescent properties and dimensional stability while being sustainable and functional. Thus, a well-known seed-mediated growth strategy has been developed to manufacture AgNCs supported onto carboxyl and aldehyde modified cellulose nanofiber (DATCNF) with ultra-small and intense fluorescence. The DATCNF acts as a reductant, template, and stabilizer while the protective ligand, 2-Mercaptonicotinic Acid (2-H2MA), provides AgNCs with luminous characteristic and constrained size of 4.47 nm. The structural feature of 2-H2MA also governs the formation and stability of AgNCs, imparting them with hydrophobic nature and steady fluorescence emission in water. This aqueous colloidal suspension (DATCNF-AgNCs) is highly dispersed, photobleaching resistant, and hardly agglomerates. Even after two months of exposure to the sun, the fluorescence intensity had only fallen by 20 %. Furthermore, the aqueous colloidal suspension exhibits outstanding antibacterial property and UV shielding capability, making it suitable as an additive for the production of TCNF films with high UV blocking capacity and high tensile strength. This strategy opens the door to design and fabricate mechanically robust DATCNF-AgNCs composites for luminescent, antimicrobial, and UV protection applications.

A Robust, Biodegradable, and Fire-Retardant Cellulose Nanofibers-Based Structural Material Fabricated from Natural Sargassum

With increasing concern about the environmental pollution of petrochemical plastics, people are constantly exploring environmentally friendly and sustainable alternative materials. Compared with petrochemical materials, cellulose has overwhelming superiority in terms of mechanical properties, thermal properties, cost, and biodegradability. However, the flammability of cellulose hinders its practical application to a certain extent, so improving the fire-retardant properties of cellulose nanofiber-based materials has become a research focus. Here, cellulose nanofiber and alginate are extracted from abundant natural sargassum as high-strength nanoscale building blocks, and then a sargassum cellulose fire-retardant structural material is prepared through a bottom-up hydrogel layer-by-layer method. The structural materials obtained incorporate excellent mechanical properties (≈297 MPa), thermal stability (≈200 °C), low thermal expansion coefficient (≈7.17 × 10-6 K-1), and fire-retardant properties. This work largely improves the utilization of seaweed residue and natural polymers, providing a bio-based fire-retardant strategy, and has a wide range of development prospects in the field of fiber-based high-performance structural materials in the future.

Interfacial functionalization and capillary force welding of enhanced silver nanowire-cellulose nanofiber composite electrodes for electroluminescent devices

The development of flexible, intelligent, and lightweight optoelectronic devices based on flexible transparent conductive electrodes (FTCEs) utilizing silver nanowires (AgNWs) has garnered increasing attention. However, achieving low surface resistance, strong adhesion to the flexible substrate, low surface roughness, and green degradability remains a challenge. Here, a composite electrode combining natural polymer cellulose nanofibers (TCNFs) with AgNWs was prepared. This process includes non-covalent interface embedding between TCNFs and AgNWs as well as a strong capillary force between the hydrophilic TCNF substrate and AgNWs during water mist capillary force cold welding. By adding ethanolamine and employing a rapid water mist wetting-drying process (within 10 s), the performance of TCNF/AgNW FTCEs significantly improves with reduced sheet resistance (8.3 Ω sq.-1), high light transmission (84.9 %), and low surface roughness (9.9 nm). Additionally, the composite electrode exhibits excellent stability and durability under various conditions such as bending, adhesion, and tensile stress. The prepared flexible electroluminescent device achieves high luminous intensity (43.6 cd m-2) and excellent operational stability, thanks to the outstanding performance of the composite electrode. This study presents a simple strategy for fabricating FTCEs using nanocellulose combined with AgNWs offering a potential material option for key components in green flexible optoelectronic devices.

Cellulose Nanomaterials Functionalized with Carboxylic Group Extracted from Lignocellulosic Agricultural Waste: Isolation and Cu(II) Adsorption for Antimicrobial Application

In this study, we reported the isolation of COOH-functionalized nanocrystal cellulose from agricultural waste, particularly dragon fruit foliage (DFF), by two methods, the citric acid/HCl acid (CA) method and the (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO)-mediated oxidation method. Chemical component quantification and physiochemical characterization techniques, such as FT-IR spectroscopy, XRD, TGA, XPS, and AFM, were employed to analyze DFF, bleached cellulose, and extracted CNs. We determined the contents of lignin and hemicellulose removed, while the signals for the cellulose contents remain the same for DFF-CA and DFF-TEMPO. The DLS, AFM, and SEM results indicated that the DFF-CA sample has a smaller average particle size (250 ± 50 nm) with a rod-like shape, compared to the DFF-TEMPO sample (600 ± 100 nm) with a fiber-like shape. Importantly, CNs extracted from DFF, including DFF-TEMPO, DFF-CA, and DFF-bleached, exhibited excellent properties for Cu (II) adsorption with a maximum adsorption of 227 mg·g-1 (for DFF-CA samples), and the adsorption is almost independent of the -COOH content. Notably, we were also able to prepare Cu-containing cellulose gels showing promising antimicrobial activity. Our work opens new possibilities for the use of unexplored cellulosic byproducts in the agricultural industry as well as potential applications of Cu-containing cellulose gels as antimicrobials.

A chitosan-based adhesive with high flame retardancy and superior bonding strength fabricated by interface engineering

With an emphasis on sustainable development, the wood industry faces great challenges, including studies on bio-based, aldehyde-free, high-strength and water-resistant adhesives. Here, a high-strength water-resistant chitosan-based adhesive was prepared by mixing of polyacrylic acid (PAA) and chitosan (CS) with assist of a little Ca2+. Meanwhile, bonding strength was enhanced through wood surface activation caused by wood: adhesive interfacial interaction. The dry and wet bonding strengths of the three-layer plywood were 3.28 MPa and 2.16 MPa, respectively. Bonding strength of the plywood remained 1.38 MPa after a "4 + 4 + 1" harsh test. The main reasons for the excellent performance were: 1) Covalent crosslinking and entanglement between PAA and CS significantly improved the cohesiveness of adhesive. 2) The introduction of Ca2+ formed organic-inorganic hybrid structure, which enhanced the cohesion and interfacial force of adhesive. 3) The active functional groups on wood surface were further cross-linked with adhesive, which greatly enhanced the interfacial bonding. After the adhesive was compounded with ammonium polyphosphate, the plywood exhibited excellent flame retardancy. These strategies have provided valuable ideas for studying high-performance wood adhesives and expanding the functionality of adhesives.

Tailoring Polyamide66 Mechanical Performance: A Strategy for Condensed Phase Structure Optimization Through Hydrogen Bond Reorganization

Polymers are widely used in various industries due to their unique properties, but their mechanical strength often falls short compared to other materials. This has spurred extensive research into enhancing their mechanical performance through condensed phase structure regulation. This study investigates the enhancement of mechanical properties in polyamide 66 (PA66) through the introduction of arylamide-based materials (TMB-5) during the melt-spinning process. TMB-5, possessing amide groups like PA66, can reorganize intermolecular hydrogen bonds within PA66, thereby facilitating molecular movement and reducing chain entanglement during fiber formation. Consequently, the synergistic effect of TMB-5 and the stretching field leads to enhanced crystallization and molecular and lamellae orientation in PA66 fibers without post-drawing, resulting in a significant increase in tensile strength and modulus. This work not only offers a novel strategy for adjusting polymer mechanical performance but also sheds light on the importance of molecular interactions in governing polymer properties.

Stable, recyclable, hybrid ionic-electronic conductive hydrogels with non-covalent networks enhanced by bagasse cellulose nanofibrils for wearable sensors

Conductive hydrogels are utilized in flexible sensors due to their high-water content, excellent elasticity, and shape controllability. However, the sharp increase in resistance of this material under enormous strain leads to instability in the sensing process. This study presents a straightforward method for creating a stable, recyclable, hybrid ionic-electronic conductive (HIEC) hydrogel via a simple one-pot strategy using polyvinyl alcohol (PVA), bagasse cellulose nanofibrils (CNF), and graphene(G) with sodium dodecylbenzene sulfonate (SDBS). The SDBS/G hemimicelles are formed through hydrophobic and π-π stacking interactions between SDBS and G, enhancing the dispersibility of G. Then SDBS/G hemimicelles were integrated into a non-covalent cross-linking network from CNF and PVA, which ensures recyclability and stability. The CNF-PVA-Graphene (CPG) hydrogel exhibited high and stable sensing sensitivity (average gauge factor up to 1.99), high conductivity (0.36 S/m), low graphene concentration (0.16 wt%), low detection limit (1 %), and fast response time (0.17 s). The sensor can detect large (wrist and knee) and small (pulse and laryngeal prominence) body movements. After recycling, the hydrogel sensors maintained high conductivity sensitivity (average gauge factor up to 1.01) and good tensile properties (360 % strain). This study introduces a new approach of hybrid conductive biomass-based hydrogel sensors for precisely monitoring human movements.

Surface and Interfacial Engineering for Multifunctional Nanocarbon Materials

Multifunctional materials are accelerating the development of soft electronics with integrated capabilities including wearable physical sensing, efficient thermal management, and high-performance electromagnetic interference shielding. With outstanding mechanical, thermal, and electrical properties, nanocarbon materials offer ample opportunities for designing multifunctional devices with broad applications. Surface and interfacial engineering have emerged as an effective approach to modulate interconnected structures, which may have tunable and synergistic effects for the precise control over mechanical, transport, and electromagnetic properties. This review presents a comprehensive summary of recent advances empowering the development of multifunctional nanocarbon materials via surface and interfacial engineering in the context of surface and interfacial engineering techniques, structural evolution, multifunctional properties, and their wide applications. Special emphasis is placed on identifying the critical correlations between interfacial structures across nanoscales, microscales, and macroscales and multifunctional properties. The challenges currently faced by the multifunctional nanocarbon materials are examined, and potential opportunities for applications are also revealed. We anticipate that this comprehensive review will promote the further development of soft electronics and trigger ideas for the interfacial design of nanocarbon materials in multidisciplinary applications.

Fracture Behavior and Biocompatibility of Cellulose Nanofiber-Reinforced Poly(vinyl alcohol) Composite Hydrogels Cross-Linked with Borax

We investigated the fracture behavior of cellulose nanofiber (CNF)-reinforced poly(vinyl alcohol) (PVA) hydrogels cross-linked with borax and the effect of freeze-thaw (FT) cycles on it. The CNF/PVA/Borax hydrogel not subjected to FT achieved a fracture energy of 5.8 kJ m-2 and a dissipative length of 2.3 mm, comparable to those of tough hydrogels. Lacking either CNF or borax remarkably decreased the fracture energy and the dissipative length; CNF contributed to a physical blocking of the crack growth, whereas the complexations between CNF and borate yielded nonlocalization of energy dissipation. Repeated FT cycles markedly improved the mechanical performance of unnotched samples, but they decreased the fracture energy due to the lowering of the dissipative length. Besides, CNF/PVA/Borax hydrogels were suitable for cell scaffold materials. The culture of umbilical cord mesenchymal stem cells (UC-MSCs) revealed a positive correlation between culture duration and the number of UC- MSCs adherent to the material.

Influence of Added Cellulose Nanocrystals on the Rheology of Polymers

The interactions between cellulose nanocrystals and six different polymers (three anionic, two non-ionic, and one cationic) were investigated using rheological measurements of aqueous solutions of nanocrystals and polymers. The experimental viscosity data could be described adequately by a power-law model. The variations in power-law parameters (consistency index and flow behavior index) with concentrations of nanocrystals and polymers were determined for different combinations of nanocrystals and polymers. The interactions between nanocrystals and the following polymers: anionic sodium carboxymethyl cellulose and non-ionic guar gum, were found to be strong in that the consistency index increased substantially with the addition of nanocrystals to polymer solutions. The interaction between nanocrystals and non-ionic polymer polyethylene oxide was moderate. Depending on the concentrations of nanocrystals and polymer, the consistency index both increased and decreased upon the addition of nanocrystals to polymer solution. The interactions between nanocrystals and the following polymers: anionic xanthan gum, anionic polyacrylamide, and cationic quaternary ammonium salt of hydroxyethyl cellulose, were found to be weak. The changes in rheological properties with nanocrystal addition to these polymer solutions were found to be small or negligible.

Design of Extruded Nanostructured Composites via Decoupling of the Cellulose Nanofibril/Poly(butylene adipate-co-terephthalate) Interface

The full exploitation of the outstanding mechanical properties of cellulose nanofibrils (CNFs) as potential reinforcements in nanocomposite materials is limited by the poor interactions at the CNF-polymer matrix interface. Within this work, tailor-made copolymers were designed to mediate the interface between CNFs and biodegradable poly(butylene adipate-co-terephthalate) (PBAT), and their effect on extruded nanocomposite performance was tested. For this purpose, two well-defined amphiphilic anchor-tail diblock copolymer structures were compared, with a fixed anchor block length and a large difference in the hydrophobic tail block length. The aim was to evaluate the impact of the copolymers' chain length on the nanocomposite interface. The presence of amphiphilic diblock copolymers significantly improved the mechanical properties compared to those of PBAT nanocomposites containing unmodified CNFs. In particular, the copolymer with a longer tail was more effective for CNF-PBAT dispersion interactions, leading to a 65% increase of Young's modulus of neat PBAT, while retaining high deformability (670%). The results provide insights into the effectiveness of a waterborne third component at the CNF-matrix interface and its structure-property relationship.

Cellulose Nanofiber-Supported Electrochemical Percolation of Capacitive Nanomaterials with 0D, 1D, and 2D Structures

Cellulose nanofiber (CNF) represents a promising support material to strengthen the mechanical property of free-standing supercapacitor electrodes comprised of conducting nanomaterials. Although efforts have been focused on improving the performance of the CNF-supported electrode, the percolation of capacitive nanomaterials within the insulating CNF matrix, and its correlation with the nanomaterial's dimensionality are still underexplored. In this work, membrane supercapacitor electrodes are fabricated by incorporating CNF with 0D, 1D, and 2D capacitive nanocarbons respectively to study the impact of their dimensionality. It is found that the percolation pathway of the nanocarbons is dependent on their dimensionality. By introducing a new definition termed as electrochemical percolation threshold, the threshold weight percentages to realize effective electrochemical percolation are determined to be 60.0, 14.3, and 66.7% for 0D, 1D, and 2D nanocarbons, respectively. Increasing the weight percentage beyond the threshold typically results in improved electrochemical percolation but reduced mechanical strength, and both trends are dependent on the nanocarbon's dimensionality. The results provide guidance to design efficient and robust CNF-supported supercapacitor electrodes by controlling the dimensionality and density of the active material. The insights regarding the electrochemical percolation threshold can be applied to other energy-storage nanomaterials to advance the development of insulator-supported supercapacitors.

Synthesis, characterization and evaluation of cellulose-graft-poly(4-vinylpirydine), using cellulose from a new pretreatment process, for heavy metal removal from wastewater

The synthesis, characterization and evaluation of cellulose-graft-poly(4-vinylpirydine) for heavy metal removal from wastewater, is reported. Cellulose was obtained from a corn cob biomass using a recently developed gas-phase acid pretreatment process (GPAPP). The obtained corn cob cellulose (CCC) was functionalized by partial esterification of the superficial -OH groups with α-bromoisobutyryl bromide (BIBB) under mild conditions (room temperature and dimethyl formamide, DMF as solvent). The functionalized cellulose was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). The BIBB-functionalized CCC was used as initiator for surface-initiated (SI) atom transfer radical polymerization (ATRP) of 4-vinylpyridine (4VP). Grafting of the polymer (p4VP) onto cellulose was confirmed by FTIR, TGA and XPS. The same procedure was carried out with microcrystalline cellulose (MCC) as a reference. The performance of the cellulose copolymers for the removal of lead and iron from water was evaluated. Removal percentages of 83 % in 30 min for lead and 79 % in 180 min for iron were obtained with MCC-g-p4VP. In contrast, removal percentages of 50 % were obtained in 30 min for lead and 30 % for iron in 180 min, respectively, when CCC-g-p4VP was used.

Electroconductive Nanocellulose, a Versatile Hydrogel Platform: From Preparation to Biomedical Engineering Applications

Nanocelluloses have garnered significant attention recently in the attempt to create sustainable, improved functional materials. Nanocellulose possesses wide varieties, including rod-shaped crystalline cellulose nanocrystals and elongated cellulose nanofibers, also known as microfibrillated cellulose. In recent times, nanocellulose has sparked research into a wide range of biomedical applications, which vary from developing 3D printed hydrogel to preparing structures with tunable characteristics. Owing to its multifunctional properties, different categories of nanocellulose, such as cellulose nanocrystals, cellulose nanofibers, and bacterial nanocellulose, as well as their unique properties are discussed here. Here, different methods of nanocellulose-based hydrogel preparation are covered, which include 3D printing and crosslinking methods. Subsequently, advanced nanocellulose-hydrogels addressing conductivity, shape memory, adhesion, and structural color are highlighted. Finally, the application of nanocellulose-based hydrogel in biomedical applications is explored here. In summary, numerous perspectives on novel approaches based on nanocellulose-based research are presented here.

Fabrication of flame-retardant and water-resistant nanopapers through electrostatic complexation of phosphorylated cellulose nanofibers and chitin nanocrystals

Biogenic, sustainable two-dimensional architectures, such as films and nanopapers, have garnered considerable interest because of their low carbon footprint, biodegradability, advanced optical/mechanical characteristics, and diverse potential applications. Here, bio-based nanopapers with tailored characteristics were engineered by the electrostatic complexation of oppositely charged colloidal phosphorylated cellulose nanofibers (P-CNFs) and deacetylated chitin nanocrystals (ChNCs). The electrostatic interaction between anionic P-CNFs and cationic ChNCs enhanced the stretchability and water stability of the nanopapers. Correspondingly, they exhibited a wet tensile strength of 17.7 MPa after 24 h of water immersion. Furthermore, the nanopapers exhibited good thermal stability and excellent self-extinguishing behavior, triggered by both phosphorous and nitrogen. These features make the nanopapers sustainable and promising structures for application in advanced fields, such as optoelectronics.

Emerging Sustainable Structural Materials by Assembling Cellulose Nanofibers

Under the guidance of the carbon peaking and carbon neutrality goals, the urgency for green ecological construction and the depletion of nonrenewable resources highlight the importance of the research and development of sustainable new materials. Cellulose nanofiber (CNF) is the most abundant natural nanoscale building block widely existing on Earth. CNF has unique intrinsic physical properties, such as low density, low coefficient of thermal expansion, high strength, and high modulus, which is an ideal candidate with outstanding potential for constructing sustainable materials. In recent years, CNF-based structural material has emerged as a sustainable lightweight material with properties very different from traditional structural materials. Here, to comprehensively introduce the assembly of structural materials based on CNF, it starts with an overview of different forms of CNF-based materials, including fibers, films, hydrogels, aerogels, and structural materials. Next, the challenges that need to be overcome in preparing CNF-based structural materials are discussed, their assembly methods are introduced, and an in-depth analysis of the advantages of the CNF-based hydrogel assembly strategy to fabricate structural materials is conducted. Finally, the unique properties of emerging CNF-based structural materials are summarized and concluded with an outlook on their design and functionalization, potentially paving the way toward new opportunities.

Carbonized wood loading sustainable tannin used as free-standing electrodes for assembling heavy metal-free supercapacitors

The design of heavy metal-free thick supercapacitor electrodes with excellent energy storage performance through a novel and effective strategy represents an attractive yet challenging area of research. In this study, a sustainable redox-active tannic acid (TA) is loaded on the carbonized wood (CW) collector to construct a low-curvature, high-capacity, heavy metal-free supercapacitor electrode. The uniform loading of TA on the surface of the CW cell wall is achieved through the combined action of mutually stable hydrogen bonding and π-π interactions, which constructs a fast electron transport channel in the collector. The rapid and reversible redox reaction between the phenol and quinone groups of TA allows the CW-TA electrode to exhibit a high specific capacitance of 1321.25 mF cm-2 at 0.5 mA cm-2 and a superior rate capability of 761.90 mF cm-2 at 50 mA cm-2. The symmetric supercapacitors (SSCs) assembled from CW-TA achieve an areal energy density of 0.12 mWh cm-2at a power density of 0.30 mW cm-2, with excellent rate performance and cyclic stability. This simple and environmentally friendly synthesis strategy provides a new avenue for research into the construction of low-cost, heavy metal-free, high energy density, and highly stable electrode materials for energy storage applications.

Highly Persistent and Robust Emulsion Stabilized by Hierarchical Cellulose Microgel through Stereo-hindrance under Extreme Conditions

Emulsion stabilization oil-in-water under harsh conditions (e.g., hypersaline, acid and alkali, and high temperature) is a great challenge for conventional emulsion stabilizers, including surfactants or particles. Herein, a persistent and robust emulsion under harsh conditions is achieved via a sustainable solution based on a hierarchical cellulose microgel (h-CMG). h-CMG in aqueous suspension establishes stable 3D networks by its nanotentacles and microbody, which can spatially hinder the approach and coalescence of droplets to each other and stabilize the emulsion. Unlike the emulsion stabilized by minimizing the interfacial energy and protecting the water/oil interface, the emulsion spatially stabilized by h-CMG exhibits extensive tolerance to extreme conditions and the feature of stable high internal phase emulsion (80%, v/v). The related droplet size and emulsion volume are almost unchanged in the pH range of 1 to 14, in NaCl aqueous solution of 2 mol/L, or even at 80 °C for 12 h. This genuine biobased emulsifier is highly favorable to the food, cosmetics, and pharmaceutical industries without the risk of nanotoxicity, and it also can provide a reliable emulsifier for the chemical and drilling industries involving harsh operation circumstances.

High-mass loaded redox-active lignin functionalized carbonized wood collector to construct sustainable and high-performance supercapacitors

Traditional electrode materials for supercapacitors often face issues like high toxicity, cost, and non-renewability. To address these drawbacks, biomass-based alternatives are being explored, aligning with green development trends. Herein, carbonized wood (CW) with rich pore structure and redox-active lignin are combined to fabricate an all-wood-based sustainable supercapacitor electrode material. Due to its inherent porous structure, CW provides a larger surface area for accommodating active materials ion, enabling the electrode to achieve a higher lignin loading capacity of 2.82-11.68 mg/cm2. Furthermore, the utilization of lignin as a substitute for conventional transition metal-based pseudocapacitor material functionalized CW endows the electrode with exemplary electrochemical performance while guaranteeing the comprehensive sustainability of the electrode. This synergy confers the electrode with exceptional electrical performance, yielding an areal capacitance of 960.7 mF/cm2 at a current density of 1 mA/cm2. The symmetric supercapacitors (SSC) manufactured by this composite electrode can achieve a notable areal energy density of 0.14 mWh/cm2 and a power density of 15.98 mW/cm2, while maintaining an outstanding capacitance retention rate of 81 % after 50,000 cycles at 20 mA/cm2. The manufacture of CW-lignin electrode underscores the potential of utilizing renewable biomass resources as alternatives for developing high-performance energy storage applications, thereby reducing negative environmental impacts.

Facet Engineering Boosts Interfacial Compatibility of Inorganic-Polymer Composites

The interfacial compatibility between inorganic particles and polymer is crucial for ensuring high performance of composites. Current efforts to improve interfacial compatibility preferentially rely on organic modification of inorganic particles, leading to their complex process, high costs, and short lifespans due to aging and decomposition of organic modifiers. However, the fabrication of inorganic particles free from organic modification that is highly compatible in polymer still remains a great challenge. Herein, a novel facet-engineered inorganic particle that exhibit high compatibility with widely used polymer interface without organic modification is reported. Theoretical calculations and experimental results show that (020) and (102) facets of inorganic particles modulate local coordination environment of Ca atoms, which in turn regulate d-orbital electron density of Ca atoms and electron transfer paths at interfaces between polymer and inorganic particles. This difference alters the molecular diffusion, orientation of molecular chains on surface of inorganic particles, further modulating interfacial compatibility of composites. Surprisingly, the facet-engineered inorganic particles show exceptional mechanical properties, especially for tensile strain at break, which increases by 395%, far superior to state-of-the-art composites counterparts. Thus, the method can offer a more benign approach to the general production of high-performance and low-cost polymer-inorganic composites for diverse potential applications.

Advanced Flexible Wearable Electronics from Hybrid Nanocomposites Based on Cellulose Nanofibers, PEDOT:PSS and Reduced Graphene Oxide

The need for responsible electronics is leading to great interest in the development of new bio-based devices that are environmentally friendly. This work presents a simple and efficient process for the creation of conductive nanocomposites using renewable materials such as cellulose nanofibers (CNF) from enzymatic pretreatment, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS), and/or reduced graphene oxide (rGO). Different combinations of CNF, rGo, and PEDOT:PSS were considered to generate homogeneous binary and ternary nanocomposite formulations. These formulations were characterized through SEM, Raman spectroscopy, mechanical, electrical, and electrochemical analysis. The binary formulation containing 40 wt% of PEDOT:PSS resulted in nanocomposite formulations with tensile strength, Young's modulus, and a conductivity of 70.39 MPa, 3.87 GPa, and 0.35 S/cm, respectively. The binary formulation with 15 wt% of rGO reached 86.19 MPa, 4.41 GPa, and 13.88 S/cm of the same respective properties. A synergy effect was observed for the ternary formulations between both conductive elements; these nanocomposite formulations reached 42.11 S/cm of conductivity and kept their strength as nanocomposites. The 3D design strategy provided a highly conductive network maintaining the structural integrity of CNF, which generated homogenous nanocomposites with rGO and PEDOT:PSS. These formulations can be considered as greatly promising for the next generation of low-cost, eco-friendly, and energy storage devices, such as batteries or electrochemical capacitors.

In situ self-assembly of pulp microfibers and nanofibers into a transparent, high-performance and degradable film

Despite the significant properties of fossil plastics, the current unsustainable methods employed in production, usage and disposal present a grave threat to both energy and environment. The development of degradable biomass materials as substitutes for fossil plastics can effectively address the energy-environment paradox at the source. Here, we prepared novel micro-nano multiscale composite films through assembling and crosslinking nanocellulose with coniferous wood pulp microfibers. The composite film combines the advantages of microfibers and nanocellulose, achieving a maximum transmittance of 91 %, foldability, excellent mechanical properties (tensile strength: 51.3 MPa, elongation at break: 4 %, young's modulus: 3.4 GPa), high thermal stability and complete degradation within 40 days. The composite film exhibits mechanochemical self-healing and retains properties even after fracture. Such exceptional performance fully meets the requirements for substituting petroleum plastics. By incorporating CaAlSiN3:Eu2+ into the composite film, it enables dual emission of red and blue light, thereby being able to promote plant growth and presenting potential as a novel sustainable alternative for agricultural films. By assembling microfiber and nanocellulose, such novel strategy is presented for the fabrication of high-quality biomass materials, thereby offering a promising avenue towards environment-friendly resource-sustainable new materials.

Large-Scale Engineerable Films Tailored with Cellulose Nanofibrils for Lighting Management and Thermal Insulation

Fibrillated cellulose-based nanocomposites can improve energy efficiency of building envelopes, especially windows, but efficiently engineering them with a flexible ability of lighting and thermal management remains highly challenging. Herein, a scalable interfacial engineering strategy is developed to fabricate haze-tunable thermal barrier films tailored with phosphorylated cellulose nanofibrils (PCNFs). Clear films with an extremely low haze of 1.6% (glass-scale) are obtained by heat-assisted surface void packing without hydrophobization of nanocellulose. PCNF gel cakes serve here as templates for surface roughening, thereby resulting in a high haze (73.8%), and the roughened films can block heat transfer by increasing solar reflection in addition to a reduced thermal conduction. Additionally, obtained films can tune distribution of light from visible to near-infrared spectral range, enabling uniform colored lighting and inhibiting localized heating. Furthermore, an integrated simulation of lighting and cooling energy consumption in the case of office buildings shows that the film can reduce the total energy use by 19.2-38.1% under reduced lighting levels. Such a scalable and versatile engineering strategy provides an opportunity to endow nanocellulose-reinforced materials with tunable optical and thermal functionalities, moving their practical applications in green buildings forward.

Unveiling potential of cellulose gel electrolyte: Molecular engineering for enhanced electrostatic interactions with Mg adatoms in Mg-ion battery

The Mg-ion battery faces significant limitations due to its liquid electrolyte, which suffers from inherent issues such as leakage and the growth of Mg dendrites. In contrast, gel polymer electrolytes (GPEs) offer heightened safety, a wide voltage window, and excellent flexibility, making them a promising alternative with outstanding electrochemical performance. In this study, a cyano-modified cellulose (CEC) GPE was engineered to aim at enhancing ion transportation and promoting uniform ion-flux through interactions between N and Mg2+ ions. The resulting CEC-based GPE demonstrated a high ionic conductivity of 1.73 mS cm-1 at room temperature. Furthermore, it exhibited remarkable Mg plating/stripping performance (coulombic efficiency ∼96.7 %) and compatibility with electrodes. Importantly, when employed in a Mo6S8//Mg battery configuration, the CEC GPE displayed exceptional cycle stability, with virtually no degradation observed even after 650 cycles at 1C, thereby significantly advancing Mg-ion battery technology due to its excellent electrochemical properties. This study provides valuable insights into the molecular engineering of cellulose-based GPEs.

Synergistically improve the strength and porosity of carbon paper by using a novel phenol formaldehyde resin modified with cellulose nanofiber for proton exchange membrane fuel cells

To optimize the imbalance between the interfacial bonding and porosity properties of carbon paper (CP) caused by phenol formaldehyde resin (PF) impregnation, and therefore improve the performance of proton exchange membrane fuel cells (PEMFCs), a new approach through cellulose nanofibers grafted with methyl methacrylate (CNFM) as a modified reinforcement and pore-forming agent for PF is investigated. Through suppressing the methylene backbone fracture of CNFM-modified PF during its thermal depolymerization, the interfacial bonding between PF matrix carbon and carbon fibers is enhanced. Compared with unmodified CP, the in-plane resistivity of CNFM-modified CP is reduced by 35.78 %, while the connected porosity increases to 82.26 %, and more homogeneous pore size distribution (PSD) in the range of 20-40 μm is obtained for CNFM-modified CP. Besides, the tensile strength, flexural strength, and air permeability of CNFM-modified CP increase by 72.78 %, 298.4 %, and 103.97 %, respectively. In addition, CNFM-modified CP achieves the peak power density of PEMFCs to 701.81 mW·cm-2, exhibiting 10.98 % improvement compared with commercial CP (632.39 mW·cm-2), evidently achieving an integral promotion of CP and comprehensive performance.

Lignocellulosic biomass-derived functional nanocellulose for food-related applications: A review

In recent years, nanocellulose (NC) has gained significant attention due to its remarkable properties, such as adjustable surface chemistry, extraordinary biological properties, low toxicity and low density. This review summarizes the preparation of NC derived from lignocellulosic biomass (LCB), including cellulose nanofibrils (CNF), cellulose nanocrystals (CNC), and lignin-containing cellulose nanofibrils (LCNF). It focuses on examining the impact of non-cellulosic components such as lignin and hemicellulose on the functionality of NC. Additionally, various surface modification strategies of NC were discussed, including esterification, etherification and silylation. The review also emphasizes the progress of NC application in areas such as Pickering emulsions, food packaging materials, food additives, and hydrogels. Finally, the prospects for producing NC from LCB and its application in food-related fields are examined. This work aims to demonstrate the effective benefits of preparing NC from lignocellulosic biomass and its potential application in the food industry.

Polyion Hydrogels of Polymeric and Nanofibrous Carboxymethyl Cellulose and Chitosan: Mechanical Characteristics and Potential Use in Environmental Remediation

Recently, cellulose and other biomass nanofibers (NFs) have been increasingly utilized in the design of sustainable materials for environmental, biomedical, and other applications. However, the past literature lacks a comparison of the macromolecular and nanofibrous states of biopolymers in various materials, and the advantages and limitations of using nanofibers (NF) instead of conventional polymers are poorly understood. To address this question, hydrogels based on interpolyelectrolyte complexes (IPECs) between carboxymethyl cellulose nanofibers (CMCNFs) and chitosan (CS) were prepared by ele+ctrostatic cross-linking and compared with the hydrogels of carboxymethyl cellulose (CMC) and CS biopolymers. The presence of the rigid CMCNF altered the mechanism of the IPEC assembly and drastically affected the structure of IPEC hydrogels. The swelling ratios of CMCNF-CS hydrogels of ca. 40% were notably lower than the ca. 100-300% swelling of CMC-CS hydrogels. The rheological measurements revealed a higher storage modulus (G') of the CMCNF-CS hydrogel, reaching 13.3 kPa compared to only 3.5 kPa measured for the CMC-CS hydrogel. Further comparison of the adsorption characteristics of the CMCNF-CS and CMC-CS hydrogels toward Cu2+, Cd2+, and Hg2+ ions showed the slightly higher adsorption capacity of CMC-CS for Cu2+ but similar adsorption capacities for Cd2+ and Hg2+. The adsorption kinetics obeyed the pseudo-second-order adsorption model in both cases. Overall, while the replacement of CMC with CMCNF in hydrogel does not significantly affect the performance of such systems as adsorbents, CMCNF imparts IPEC hydrogel with higher stiffness and a frequency-independent loss (G″) modulus and suppresses the hydrogel swelling, so can be beneficial in practical applications that require stable performance under various dynamic conditions.

In Vitro Gastrointestinal Digestion of Corn-Oil-in-Water Pickering Emulsions: Influence of Lignin-Containing Cellulose Nanofibrils Loading

There is a growing trend in incorporating biomass-based engineered nanomaterials into food products to enhance their quality and functionality. The zeta potential, droplet size, microstructure, and content of free fatty acid (FFA) release were determined to investigate the influence of a plant-derived particle stabilizer, i.e., lignin-containing cellulose nanofibrils (LCNFs). Remarkable differences were observed during digestion stages, which were found to be correlated with the concentrations of LCNFs. The gradual FFA release in the small intestine stage from LCNF-coated lipid droplets was monitored over time, with a final lowest release of FFAs amounting to 26.3% in the emulsion containing 20.0% (v/v) of the dispersed phase stabilized by 3 mg/mL of LCNFs. This release can be attributed to the physical barrier at lipid droplet surfaces and the network effect created by the free LCNFs in the continuous phase. This work provides a foundation for the potential application of nature-derived LCNF materials in reducing fat absorbance.

"Bottom-up" and "top-down" strategies toward strong cellulose-based materials

Cellulose, as the most abundant natural polymer on Earth, has long captured researchers' attention due to its high strength and modulus. Nevertheless, transferring its exceptional mechanical properties to macroscopic 2D and 3D materials poses numerous challenges. This review provides an overview of the research progress in the development of strong cellulose-based materials using both the "bottom-up" and "top-down" approaches. In the "bottom-up" strategy, various forms of regenerated cellulose-based materials and nanocellulose-based high-strength materials assembled by different methods are discussed. Under the "top-down" approach, the focus is on the development of reinforced cellulose-based materials derived from wood, bamboo, rattan and straw. Furthermore, a brief overview of the potential applications fordifferent types of strong cellulose-based materials is given, followed by a concise discussion on future directions.

Lysine-mediated surface modification of cellulose nanocrystal films for multi-channel anti-counterfeiting

Utilizing advanced multiple channels for information encryption offers a powerful strategy to achieve high-capacity and highly secure data protection. Cellulose nanocrystals (CNCs) offer a sustainable resource for developing information protection materials. In this study, we present an approach that is easy to implement and adapt for the covalent attachment of various fluorescence molecules onto the surface of CNCs using the Mannich reaction in aqueous-based medium. Through the use of the Mannich reaction-based surface modification technique, we successfully achieved multi-color fluorescence in the resulting CNCs. The resulting CNC derivatives were thoroughly characterized by two dimensional heteronuclear single quantum coherence nuclear magnetic resonance (2D HSQC NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron (XPS) spectroscopy. Notably, the optical properties of CNCs were well maintained after modification, resulting in films exhibiting blue and red structural colors. This enables the engineering of highly programmable and securely encoded anti-counterfeit labels. Moreover, subsequent coating of the modified CNCs with MXene yielded a highly secure encrypted matrix, offering advanced security and encryption capabilities under ultraviolet, visible, and near-infrared wavelengths. This CNC surface-modification enables the development of multimodal security labels with potential applications across various practical scenarios.

Nanocellulose from agro-industrial wastes: A review on sources, production, applications, and current challenges

Significant volumes of agricultural and industrial waste are produced annually. With the global focus shifting towards sustainable and environmentally friendly practices, there is growing emphasis on recycling and utilizing materials derived from such waste, such as cellulose and lignin. In response to this imperative situation, nanocellulose materials have surfaced attracting heightened attention and research interest owing to their superior properties in terms of strength, stiffness, biodegradability, and water resistance. The current manuscript provided a comprehensive review encompassing the resources of nanocellulose, detailed pretreatment and extraction methods, and present applications of nanocellulose. More importantly, it highlighted the challenges related to its processing and utilization, along with potential solutions. After evaluating the benefits and drawbacks of different methods for producing nanocellulose, ultrasound combined with acid hydrolysis emerges as the most promising approach for large-scale production. While nanocellulose has established applications in water treatment, its potential within the food industry appears even more encouraging. Despite the numerous potential applications across various sectors, challenges persist regarding its modification, characterization, industrial-scale manufacturing, and regulatory policies. Overcoming these obstacles requires the development of new technologies and assessment tools aligned with policy. In essence, nanocellulose presents itself as an eco-friendly material with extensive application possibilities, prompting the need for additional research into its extraction, application suitability, and performance enhancement. This review focused on the wide application scenarios of nanocellulose, the challenges of nanocellulose application, and the possible solutions.

Cellulose Nanofibrils/Alginates Double-Network Composites: Effects of Interfibrillar Interaction and G/M Ratio of Alginates on Mechanical Performance

Interfibrillar phases and bonding in cellulose nanofibril (CNF)-based composites are crucial for materials performances. In this study, we investigated the influence of CNF surface characteristics, the guluronic acid/mannuronic acid ratio, and the molecular weight of alginates on the structure, mechanical, and barrier properties of CNF/alginate composite films. Three types of CNFs with varying surface charges and nanofibril dimensions were prepared from wood pulp fibers. The interfacial bonding through calcium ion cross-linking between alginate and carboxylated CNFs (TCNFs) led to significantly enhanced stiffness and strength due to the formation of an interpenetrating double network, compared to composites from alginates and CNFs with native negative or cationic surface charges. Various alginates extracted from Alaria esculenta (AE) and Laminaria hyperborea (LH) were also examined. The TCNF/AE composite, prepared from alginate with a high mannuronic acid proportion and high molecular weight, exhibited a Young's modulus of 20.3 GPa and a tensile strength of 331 MPa under dry conditions and a Young's modulus of 430 MPa and a tensile strength of 9.3 MPa at the wet state. Additionally, the TCNF/AE composite demonstrated protective properties as a barrier coating for fruit, significantly reducing browning of banana peels and weight loss of bananas stored under ambient conditions.

Biosustainable Multiscale Transparent Nanocomposite Films for Sensitive Pressure and Humidity Sensors

Light weight, thinness, transparency, flexibility, and insulation are the key indicators for flexible electronic device substrates. The common flexible substrates are usually polymer materials, but their recycling is an overwhelming challenge. Meanwhile, paper substrates are limited in practical applications because of their poor mechanical and thermal stability. However, natural biomaterials have excellent mechanical properties and versatility thanks to their organic-inorganic multiscale structures, which inspired us to design an organic-inorganic nanocomposite film. For this purpose, a bio-inspired multiscale film was developed using cellulose nanofibers with abundant hydrophilic functional groups to assist in dispersing hydroxyapatite nanowires. The thickness of the biosustainable film is only 40 μm, and it incorporates distinctive mechanical properties (strength: 52.8 MPa; toughness: 0.88 MJ m-3) and excellent optical properties (transmittance: 80.0%; haze: 71.2%). Consequently, this film is optimal as a substrate employed for flexible sensors, which can transmit capacitance and resistance signals through wireless Bluetooth, showing an ultrasensitive response to pressure and humidity (for example, responding to finger pressing with 5000% signal change and exhaled water vapor with 4000% signal change). Therefore, the comprehensive performance of the biomimetic multiscale organic-inorganic composite film confers a prominent prospect in flexible electronics devices, food packaging, and plastic substitution.

Nanocellulose-mediated bilayer hydrogel actuators with thermo-responsive, shape memory and self-sensing performances

Inspired by creatures, abundant stimulus-responsive hydrogel actuators with diverse functionalities have been manufactured for applications in soft robotics. However, constructing a shape memory and self-sensing bilayer hydrogel actuator with high mechanical strength and strong interfacial bonding still remains a challenge. Herein, a novel bilayer hydrogel with a stimulus-responsive TEMPO-oxidized cellulose nanofibers/poly(N-isopropylacrylamide) (TOCN/PNIPAM) layer and a non-responsive TOCN/polyacrylamide (TOCN/PAM) layer is proposed as a thermosensitive actuator. TOCNs as a nano-reinforced phase provide a high mechanical strength and endow the hydrogel actuator with a strong interfacial bonding. Due to the incorporation of TOCNs, the TOCN/PNIPAM hydrogel exhibits a high compressive strength (~89.2 kPa), elongation at break (~170.7 %) and tensile strength (~24.0 kPa). The prepared PNIPAM/TOCN/PAM hydrogel actuator performs the roles of an encapsulation, jack, temperature-controlled fluid valve and temperature-control manipulator. The incorporation of Fe3+ further endows the bilayer hydrogel actuator with a synergistic performance of shape memory and temperature-driven, which can be used as a temperature-responsive switch to detect ambient temperature. The PNIPAM/TOCN/PAM-Fe3+ conductive hydrogel can be assembled into a flexible sensor and generate sensing signals when driven by temperature changes to achieve real-time feedback. This research may lead to new insights into the design and manufacturing of intelligent flexible soft robots.

Flexible cellulose nanofiber aerogel with enhanced porous structure and its applications in copper(II) removal

In order to achieve an aerogel with both rigid pore structures and desired flexibility, stiff carboxyl-functionalized cellulose nanofiber (CNFs) were introduced into a flexible polyvinyl alcohol-polyethyleneimine (PVA-PEI) crosslinking network, with 4-formylphenylboronic acid (4FPBA) bridging within the PVA-PEI network to enable dynamic boroxine and imine bond formation. The strong covalent bonds and hydrogen connections between CNF and the crosslinking network enhanced the wet stability of the aerogel while also contributed to its thermal stability. Importantly, the harmonious coordination between the stiff CNF and the flexible polymer chains not only facilitated aerogel flexibility but also enhanced its increased specific surface area by improving pore structure. Moreover, the inclusion of CNF enhanced the adsorption capacity of the aerogel, rendering it effective for removing heavy metal ions. The specific surface area and adsorption capacity for copper ions of the aerogel increased significantly with a 3 wt% addition CNF suspension, reaching 19.74 m2 g-1 and 60.28 mg g-1, respectively. These values represent a remarkable increase of 590.21 % and 213.96 %, respectively, compared to the blank aerogel. The CNF-enhanced aerogel in this study, characterized by its well-defined pore structures, and desired flexibility, demonstrates versatile applicability across multiple domains, including environmental protection, thermal insulation, electrode fabrication, and beyond.

Rheology of Suspensions Thickened by Cellulose Nanocrystals

The steady rheological behavior of suspensions of solid particles thickened by cellulose nanocrystals is investigated. Two different types and sizes of particles are used in the preparation of suspensions, namely, TG hollow spheres of 69 µm in Sauter mean diameter and solospheres S-32 of 14 µm in Sauter mean diameter. The nanocrystal concentration varies from 0 to 3.5 wt% and the particle concentration varies from 0 to 57.2 vol%. The influence of salt (NaCl) concentration and pH on the rheology of suspensions is also investigated. The suspensions generally exhibit shear-thinning behavior. The degree of shear-thinning is stronger in suspensions of smaller size particles. The experimental viscosity data are adequately described by a power-law model. The variations in power-law parameters (consistency index and flow behavior index) under different conditions are determined and discussed in detail.

Interfacial Engineering of Soft Matter Substrates by Solid-State Polymer Adsorption

Polymer coating to substrates alters surface chemistry and imparts bulk material functionalities with a minute thickness, even in nanoscale. Specific surface modification of a substate usually requires an active substrate that, e.g., undergoes a chemical reaction with the modifying species. Here, we present a generic method for surface modification, namely, solid-state adsorption, occurring purely by entropic strive. Formed by heating above the melting point or glass transition and subsequent rinsing of the excess polymer, the emerging ultrathin (<10 nm) layers are known in fundamental polymer physics but have never been utilized as building blocks for materials and they have never been explored on soft matter substrates. We show with model surfaces as well as bulk substrates, how solid-state adsorption of common polymers, such as polystyrene and poly(lactic acid), can be applied on soft, cellulose-based substrates. Our study showcases the versatility of solid-state adsorption across various polymer/substrate systems. Specifically, we achieve proof-of-concept hydrophobization on flexible cellulosic substrates, maintaining irreversible and miniscule adsorption yet with nearly 100% coverage without compromising the bulk material properties. The method can be considered generic for all polymers whose Tg and Tm are below those of the to-be-coated adsorbed layer, and whose integrity can withstand the solvent leaching conditions. Its full potential has broad implications for diverse materials systems where surface coatings play an important role, such as packaging, foldable electronics, or membrane technology.

Tailoring the Holocellulose Fiber/Acrylic Resin Composite Interface with Hydrophobic Carboxymethyl Cellulose to Enhance Optical and Mechanical Properties

Interface engineering is essential for cellulosic fiber-reinforced polymer composites to achieve high strength and toughness. In this study, carboxymethyl cellulose (CMC) functionalized with hydrophobic quaternary ammonium ions (QAs) were utilized to modify the interface between holocellulose fibers (HF) and acrylic resin. The wet HF/CMC papers were prepared by vacuum filtration, akin to papermaking, followed by cationic ion exchange with different hydrophobic QAs. Subsequently, the modified papers were dried, impregnated with an acrylic resin monomer, and cured to produce transparent composite films. The effect of the hydrophobic QA moieties on the structure and optical and mechanical properties of the HF/CMC/acrylic resin composites were investigated. The composite film with cetyltrimethylammonium (CTA)-functionalized CMC showed high optical transmittance (87%) with low haze (43%), while the composite film with phenyltrimethylammonium (PTMA)-functionalized CMC demonstrated high Young's modulus of 7.6 GPa and high tensile strength of 180 MPa. These properties are higher than those of the composites prepared through covalent interfacial modification strategies. The results highlighted the crucial role of hydrophobic functionalized CMCs in facilitating homogeneous resin impregnation in the HF fiber network, producing a composite with enhanced interfacial adhesion strength, increased optical transparency, and mechanical strength. This facile use of hydrophobic CMCs as interfacial compatibilizers provides an energy-efficient route for preparing transparent, thin, and flexible composite films favorable in optoelectronic applications.

Directly Converting Bulk Wood into Branch Micro-Nano Fibers to Synergistically Enhance the Strength and Toughness via Interface Engineering

Hierarchical biobased micro/nanomaterials offer great potential as the next-generation building blocks for robust films or macroscopic fibers with high strength, while their capability in suppressing crack propagation when subject to damage is hindered by their limited length. Herein, we employed an approach to directly convert bulk wood into fibers with a high aspect ratio and nanosized branching structures. Particularly, the length of microfibers surpassed 1 mm with that of the nanosized branches reaching up to 300 μm. The presence of both interwoven micro- and nanofibers endowed the product with substantially improved tensile strength (393.99 MPa) and toughness (19.07 MJ m-3). The unique mechanical properties arose from mutual filling and the hierarchical deformation facilitated by branched nanofibers, which collectively contributed to effective energy dissipation. Hence, the nanotransformation strategy opens the door toward a facial, scalable method for building high-strength film or macroscopic fibers available in various advanced applications.

Nanocellulose-mediated conductive hydrogels with NIR photoresponse and fatigue resistance for multifunctional wearable sensors

The rapid development of hydrogels has garnered significant attention in health monitoring and human motion sensing. However, the synthesis of multifunctional conductive hydrogels with excellent strain/pressure sensing and photoresponsiveness remains a challenge. Herein, the conductive hydrogels (BPTP) with excellent mechanical properties, fatigue resistance and photoresponsive behavior composed of polyacrylamide (PAM) matrix, 2,2,6,6-tetramethylpiperidin-1-yloxy-oxidized cellulose nanofibers (TOCNs) reinforcement and polydopamine-modified black phosphorus (BP@PDA) photosensitizer are prepared through a facile free-radical polymerization approach. The PDA adhered to the BP surface by π-π stacking promotes the optical properties of BP while also preventing BP oxidation from water. Through hydrogen bonding interactions, TOCNs improve the homogeneous dispersion of BP@PDA nanosheets and the mechanical toughness of BPTP. Benefiting from the synergistic effect of PDA and TOCNs, the conductive BPTP integrates superior mechanical performances, excellent photoelectric response and photothermal conversion capability. The BPTP-based sensor with high cycling stability demonstrates superior strain sensitivity (GF = 6.0) and pressure sensing capability (S = 0.13 kPa-1) to monitor various human activities. Therefore, this work delivers an alternative construction strategy for generating high-performance conductive hydrogels as multifunctional wearable sensors.

Reversible Surface Engineering of Cellulose Elementary Fibrils: From Ultralong Nanocelluloses to Advanced Cellulosic Materials

Cellulose nanofibrils (CNFs) are supramolecular assemblies of cellulose chains that provide outstanding mechanical support and structural functions for cellulosic organisms. However, traditional chemical pretreatments and mechanical defibrillation of natural cellulose produce irreversible surface functionalization and adverse effects of morphology of the CNFs, respectively, which limit the utilization of CNFs in nanoassembly and surface functionalization. Herein, this work presents a facile and energetically efficient surface engineering strategy to completely exfoliate cellulose elementary fibrils from various bioresources, which provides CNFs with ultrahigh aspect ratios (≈1400) and reversible surface. During the mild process of swelling and esterification, the crystallinity and the morphology of the elementary fibrils are retained, resulting in high yields (98%) with low energy consumption (12.4 kJ g-1). In particular, on the CNF surface, the surface hydroxyl groups are restored by removal of the carboxyl moieties via saponification, which offers a significant opportunity for reconstitution of stronger hydrogen bonding interfaces. Therefore, the resultant CNFs can be used as sustainable building blocks for construction of multidimensional advanced cellulosic materials, e.g., 1D filaments, 2D films, and 3D aerogels. The proposed surface engineering strategy provides a new platform for fully utilizing the characteristics of the cellulose elementary fibrils in the development of high-performance cellulosic materials.

Current progress in functionalization of cellulose nanofibers (CNFs) for active food packaging

There is a growing interest in utilizing renewable biomass resources to manufacture environmentally friendly active food packaging, against the petroleum-based polymers. Cellulose nanofibers (CNFs) have received significant attention recently due to their sustainability, biodegradability, and widely available sources. CNFs are generally obtained through chemical or physical treatment, wherein the original surface chemistry and interfacial interactions can be changed if the functionalization process is applied. This review focuses on promising and sustainable methods of functionalization to broaden the potential uses of CNFs in active food packaging. Novel aspects, including functionalization before, during and after cellulose isolation, and functionalization during and after material processing are addressed. The CNF-involved structural construction including films, membranes, hydrogels, aerogels, foams, and microcapsules, is illustrated, which enables to explore the correlations between structure and performance in active food packaging. Additionally, the enhancement of CNFs on multiple properties of active food packaging are discussed, in which the interaction between active packaging systems and encapsulated food or the internal environment are highlighted. This review emphasizes novel approaches and emerging trends that have the potential to revolutionize the field, paving the way for advancements in the properties and applications of CNF-involved active food packaging.

Nanocellulose-stabilized nanocomposites for effective Hg(II) removal and detection: a comprehensive review

Mercury pollution, with India ranked as the world's second-largest emitter, poses a critical environmental and public health challenge and underscores the need for rigorous research and effective mitigation strategies. Nanocellulose is derived from cellulose, the most abundant natural polymer on earth, and stands out as an excellent choice for mercury ion remediation due to its remarkable adsorption capacity, which is attributed to its high specific surface area and abundant functional groups, enabling efficient Hg(II) ion removal from contaminated water sources. This review paper investigates the compelling potential of nanocellulose as a scavenging tool for Hg(II) ion contamination. The comprehensive examination encompasses the fundamental attributes of nanocellulose, its diverse fabrication techniques, and the innovative development methods of nanocellulose-based nanocomposites. The paper further delves into the mechanisms that underlie Hg removal using nanocellulose, as well as the integration of nanocellulose in Hg detection methodologies, and also acknowledges the substantial challenges that lie ahead. This review aims to pave the way for sustainable solutions in mitigating Hg contamination using nanocellulose-based nanocomposites to address the global context of this environmental concern.

Biopolymeric Nanocomposites for CO2 Capture

Carbon dioxide (CO2) impacts the greenhouse effect significantly and results in global warming, prompting urgent attention to climate change concerns. In response, CO2 capture has emerged as a crucial process to capture carbon produced in industrial and power processes before its release into the atmosphere. The main aim of CO2 capture is to mitigate the emissions of greenhouse gas and reduce the anthropogenic impact on climate change. Biopolymer nanocomposites offer a promising avenue for CO2 capture due to their renewable nature. These composites consist of biopolymers derived from biological sources and nanofillers like nanoparticles and nanotubes, enhancing the properties of the composite. Various biopolymers like chitosan, cellulose, carrageenan, and others, possessing unique functional groups, can interact with CO2 molecules. Nanofillers are incorporated to improve mechanical, thermal, and sorption properties, with materials such as graphene, carbon nanotubes, and metallic nanoparticles enhancing surface area and porosity. The CO2 capture mechanism within biopolymer nanocomposites involves physical absorption, chemisorption, and physisorption, driven by functional groups like amino and hydroxyl groups in the biopolymer matrix. The integration of nanofillers further boosts CO2 adsorption capacity by increasing surface area and porosity. Numerous advanced materials, including biopolymeric derivatives like cellulose, alginate, and chitosan, are developed for CO2 capture technology, offering accessibility and cost-effectiveness. This semi-systematic literature review focuses on recent studies involving biopolymer-based materials for CO2 capture, providing an overview of composite materials enriched with nanomaterials, specifically based on cellulose, alginate, chitosan, and carrageenan; the choice of these biopolymers is dictated by the lack of a literature perspective focused on a currently relevant topic such as these biorenewable resources in the framework of carbon capture. The production and efficacy of biopolymer-based adsorbents and membranes are examined, shedding light on potential trends in global CO2 capture technology enhancement.

Advancements in Hybrid Cellulose-Based Films: Innovations and Applications in 2D Nano-Delivery Systems

This review paper delves into the realm of hybrid cellulose-based materials and their applications in 2D nano-delivery systems. Cellulose, recognized for its biocompatibility, versatility, and renewability, serves as the core matrix for these nanomaterials. The paper offers a comprehensive overview of the latest advancements in the creation, analysis, and application of these materials, emphasizing their significance in nanotechnology and biomedical domains. It further illuminates the integration of nanomaterials and advanced synthesis techniques that have significantly improved the mechanical, chemical, and biological properties of hybrid cellulose-based materials.

Fabrication of an Ultrastrong Formaldehyde-Free Wood Adhesive with an Organic-Inorganic Cross-Linking Network

The wood industry faces challenges in producing eco-friendly, high-performance, and formaldehyde-free adhesives. In this study, carboxylated styrene-butadiene rubber (XSBR) was blended with polyamidoamine-epichlorohydrin (PAE) resin, and a controlled amount of CaCO3 powder was incorporated to create an adhesive with exceptional strength. The resulting three-layer plywood demonstrated remarkable dry and wet shear strengths of 3.09 and 2.36 MPa, respectively, and of 2.27 MPa after boiling water tests, comparable to that of phenolic resins. Additionally, the adhesive exhibited strong adhesion across various materials including glass, metal, etc. This exceptional performance was due to two primary factors: (1) the high-density chemical cross-linking reaction and the physical entanglement between XSBR and PAE; (2) the organic-inorganic hybrid involving metal ion complexation developed by CaCO3, which fostered molecular chain connections and enhanced the adhesive-material interface. These findings offer valuable references for further research in the field of wood adhesives.

Growth of ZnO nanorods/flowers on the carbon fiber surfaces using sodium alginate as medium to enhance the mechanical properties of composites

The chemical inertness of the carbon fiber (CF) surface results in suboptimal mechanical properties of the prepared composites. To address this issue, we employed a combination of tannic acid and 3-aminopropyltriethoxysilane mixture (TA-APTES) grafted sodium alginate (SA) as a medium to enhance the interfacial properties of composites through the growth of ZnO nanoparticles on CF surfaces. ZnO nanolayers with rod-like and flower-like structures were obtained by adjusting the pH of the reaction system (pH = 10 and 12, respectively). Characterization results show that in comparison with the untreated CF composites, in the flexural strength, flexural modulus, interlaminar shear strength (ILSS) and interfacial shear strength (IFSS) of the as-prepared CF/TA-APTES/SA/ZnO10 (nanorods) composites were improved by 40.8 %, 58.4 %, 44.9 % and 47.8 %, respectively. The prepared CF/TA-APTES/SA/ZnO12 (nanoflowers) composite showed an increase in flexural strength, flexural modulus, ILSS and IFSS by 39.8 %, 63.6 %, 47.3 % and 48.2 %, respectively. These positive results indicate that the ZnO nanolayers increase the interfacial phase area and fiber surface roughness, thereby enhancing mechanical interlocking and load transfer between the fibers and resin matrix. This work provides a novel interfacial modification method for preparing CF composites used in longer and more durable wind turbine blades.

Nanocellulose based ultra-elastic and durable foams for smart packaging applications

Foams with advanced sensing properties and excellent mechanical properties are promising candidates for smart packaging materials. However, the fabrication of ultra-elastic and durable foams is still challenging. Herein, we report a universal strategy to obtain ultra-elastic and durable foams by crosslinking cellulose nanofiber and MXene via strong covalent bonds and assembling the composites into anisotropic cellular structures. The obtained composite foam shows an excellent compressive strain of up to 90 % with height retention of 97.1 % and retains around 90.3 % of its original height even after 100,000 compressive cycles at 80 % strain. Their cushioning properties were systematically investigated, which are superior to that of wildly-used petroleum-based expanded polyethylene and expanded polystyrene. By employing the foam in a piezoelectric sensor, a smart cushioning packaging and pressure monitoring system is constructed to protect inner precision cargo and detect endured pressure during transportation for the first time.

Tough and Moldable Sustainable Cellulose-Based Structural Materials via Multiscale Interface Engineering

All-natural materials derived from cellulose nanofibers (CNFs) are expected to be used to replace engineering plastics and have attracted much attention. However, the lack of crack extension resistance and 3D formability of nanofiber-based structural materials hinders their practical applications. Here, a multiscale interface engineering strategy is reported to construct high-performance cellulose-based materials. The sisal microfibers are surface treated to expose abundant active CNFs with positive charges, thereby enhancing their interfacial combination with the negatively charged CNFs. The robust multiscale dual network enables easy molding of multiscale cellulose-based structural materials into complex 3D special-shaped structures, resulting in nearly twofold and fivefold improvements in toughness and impact resistance compared with those of CNFs-based materials. Moreover, this multiscale interface engineering strategy endows cellulose-based structural materials with better comprehensive performance than petrochemical-based plastics and broadens cellulose's potential for lightweight applications as structural materials with lower environmental effects.

A highly sensitive and anti-freezing conductive strain sensor based on polypyrrole/cellulose nanofiber crosslinked polyvinyl alcohol hydrogel for human motion detection

Electro-conductive hydrogels emerge as a stretchable conductive materials with diverse applications in the synthesis of flexible strain sensors. However, the high-water content and low cross-links density cause them to be mechanically destroyed and freeze at subzero temperatures, limiting their practical applications. Herein, we report a one-pot strategy by co-incorporating cellulose nanofiber (CNF), Poly pyrrole (PPy) and glycerol with polyvinyl alcohol (PVA) to prepare hydrogel. The addition of PPy endowed the hydrogel with good conductivity (∼0.034 S/m) compared to the no PPy@CNF group (∼0.0095 S/m), the conductivity was increased by 257.9 %. The hydrogel exhibits comparable ionic conductivity at -18 °C as it does at room temperature. It's attributed to the glycerol as a cryoprotectant and the formation of hydrated [Zn(H2O)n]2+ ions via strong interaction between Zn2+ and water molecules. Moreover, the cellulose nanofiber intrinsically assembled into unique hierarchical structures allow for strong hydrogen bonds between adjacent cellulose and PPy polymer chains, greatly improve the mechanical strength (stress∼0.65 MPa, strain∼301 %) and excellent viscoelasticity (G'max ∼ 82.7 KPa). This novel PPy@CNF-PVA hydrogel exhibits extremely high Gauge factor (GF) of 2.84 and shows excellent sensitivity, repeatability and stability. Therefore, the hydrogel can serve as reliable and stable strain sensor which shows excellent responsiveness in human activities monitoration.