The plastic in microplastics: A review

Assessment of microplastic contamination in some commercial fishes of the southern Caspian Sea and its potential risks

This study examined the occurrence of microplastics (MPs) in the gastrointestinal tract (GIT) of 384 fishes classified into four species from 11 sites in 2022 from the southern part of the Caspian Sea. GITs of fishes were collected and digested in H2O2 and KOH at 45 °C for 72 h. After filtration, extracted MPs were observed under a stereomicroscope, and selected MP particles were identified using FTIR. Presence of MPs was 68.98% in the GIT of the investigated fish. The mean abundance of MPs was 5.9 ± 0.9 MPs/GIT in Rutilus kutum, 9.2 ± 1.2 MPs/GIT in Chelon auratus, 3.6 ± 0.7 MPs/GIT in Alosa braschnikowi, and 2.7 ± 0.5 MPs/GIT in Vimba vimba. The predominant form of MPs was fiber (58.21%), followed by fragment (34.77%). Black (34.4%), white (19.07%), and blue (14.58%) were the most frequently detected colors of MPs. Overall, 6 MP polymers were identified, dominantly polypropylene (42.86%), polystyrene (17.86%), and cellophane (14.28%). The western part of the Caspian Sea (mostly tourist spots and urban areas) showed more MP pollution in fish compared to the eastern part. Polymer hazard index (PHI) revealed alarming microplastic contamination in the southern Caspian Sea. The PHI value of the present study showed that PES (PHI = 8403.78) and PS (PHI = 535.80) were "Extreme danger" and "Danger" risk categories, respectively.

Effects of polypropylene microplastics on carbon dioxide dynamics in intertidal mangrove sediments

Microplastics (MPs) in soil can influence CO2 dynamics by altering organic carbon (OC) and microbial composition. Nevertheless, the fluctuation of CO2 response attributed to MPs in mangrove sediments is unclear. This study explores the impact of micro-sized polypropylene (mPP) particles on the carbon dynamics of intertidal mangrove sediments. In the high-tide level sediment, after 28 days, the cumulative CO2 levels for varying mPP dosages were as follows: 496.86 ± 2.07, 430.38 ± 3.84 and 447.09 ± 1.72 mg kg-1 for 0.1%, 1% and 10% (w/w) mPP, respectively. The CO2 emissions were found to be increased with a 0.1% (w/w) mPP level and decreased with 1% and 10% (w/w) mPP at high-tide level sediment, suggesting a tide level-specific dose dependence of the CO2 emission pattern in mangrove sediments. Overall, results indicated that the presence of mPP in mangrove sediments would potentially affect intertidal total CO2 storage under given experimental conditions.

Differential scanning calorimetry (DSC): An important tool for polymer identification and characterization of plastic marine debris

Differential scanning calorimetry (DSC), a routine thermoanalytical method in material science, is gaining utility in plastic pollution research to improve polymer identification. We optimized a DSC method, experimentally testing pan types, temperature ramps, number of melts, and minimum sample masses. Using the optimized method, we created an in-house thermogram library from 201 polymer reference standards. We determined peak melting temperature cutoffs for differentiating variants of PE and nylon. PE cutoffs remained stable after experimentally weathering standards outdoors or for severely weathered HDPE debris found on Hawaii's beaches. Marine debris samples, across a range of weathering severity and previously identified as either low-density or high-density polyethylene (LDPE or HDPE) based on the 1377 cm-1 peak indicating methyl groups by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), were analyzed by DSC to confirm or challenge the ATR-FTIR PE differentiation. ATR-FTIR was correct for >80% of the HDPE samples, but <40% of those initially identified as LDPE by ATR-FTIR. Accuracy did not relate to weathering extent. Most samples mis-identified as LDPE were HDPE that had formed methyl groups likely from chain scission during photooxidation. ATR-FTIR alone is unreliable for differentiating weathered PE, DSC is required. We provide a multiple-method workflow for complete and accurate polymer identification, even for microplastics ≥0.03 mg. Applying these methods can better identify the polymer composition of marine debris, essential for sourcing and recycling efforts.

Assessing microbial plastic degradation requires robust methods

Plastics are versatile materials that have the potential to propel humanity towards circularity and ultimate societal sustainability. However, the escalating concern surrounding plastic pollution has garnered significant attention, leading to widespread negative perceptions of these materials. Here, we question the role microbes may play in plastic pollution bioremediation by (i) defining polymer biodegradability (i.e., recalcitrant, hydrolysable and biodegradable polymers) and (ii) reviewing best practices for evaluating microbial biodegradation of plastics. We establish recommendations to facilitate the implementation of rigorous methodologies in future studies on plastic biodegradation, aiming to push this field towards the use of isotopic labelling to confirm plastic biodegradation and further determine the molecular mechanisms involved.

Pulmonary toxicity assessment of polypropylene, polystyrene, and polyethylene microplastic fragments in mice

Polypropylene (PP), polystyrene (PS), and polyethylene (PE) plastics are commonly used in household items such as electronic housings, food packaging, bottles, bags, toys, and roofing membranes. The presence of inhalable microplastics in indoor air has become a topic of concern as many people spent extended periods of time indoors during the COVID-19 pandemic lockdown restrictions, however, the toxic effects on the respiratory system are not properly understood. We examined the toxicity of PP, PS, and PE microplastic fragments in the pulmonary system of C57BL/6 mice. For 14 days, mice were intratracheally instilled 5 mg/kg PP, PS, and PE daily. The number of inflammatory cells such as macrophages, neutrophils, and eosinophils in the bronchoalveolar lavage fluid (BALF) of PS-instilled mice was significantly higher than that in the vehicle control (VC). The levels of inflammatory cytokines and chemokines in BALF of PS-instilled mice increased compared to the VC. However, the inflammatory responses in PP- and PE-stimulated mice were not significantly different from those in the VC group. We observed elevated protein levels of toll-like receptor (TLR) 2 in the lung tissue of PP-instilled mice and TLR4 in the lung tissue of PS-instilled mice compared with those to the VC, while TLR1, TLR5, and TLR6 protein levels remained unchanged. Phosphorylation of nuclear factor kappa B (NF-κB) and IĸB-α increased significantly in PS-instilled mice compared with that in VC. Furthermore, Nucleotide‑binding oligomerization domain‑like receptor family pyrin domain‑containing 3 (NLRP3) inflammasome components including NLRP3, apoptosis-associated speck-like protein containing a caspase recruitment domain (ASC), and Caspase-1 in the lung tissue of PS-instilled mice increased compared with that in the VC, but not in PP- and PE-instilled mice. These results suggest that PS microplastic fragment stimulation induces pulmonary inflammation due to NF-ĸB and NLRP3 inflammasome activation by the TLR4 pathway.

Supplementary Information

The online version contains supplementary material available at 10.1007/s43188-023-00224-x.

Leakage of plastics and other debris from landfills to a highly protected lake by wintering gulls

GENERAL CONTEXT

Gulls ingest plastic and other litter while foraging in open landfills, because organic matter is mixed with other debris. Therefore, gulls are potential biovectors of plastic pollution into natural habitats, especially when they concentrate in wetlands for roosting.

NOVELTY

We quantified, for the first time, the flow of plastic and other anthropogenic debris from open landfills to a natural lake via the movement of gulls. We focused on Fuente de Piedra, an inland closed-basin lake in Spain that is internationally important for biodiversity.

METHODOLOGY

In 2022, we sampled gull pellets regurgitated in the lake by lesser black-backed gulls Larus fuscus that feed on landfills, as well as their faeces, then characterized and quantified debris particles of ≥0.5 mm. By combining GPS and census data from 2010 to 2022, together with plastic quantification based on FTIR-ATR analysis, we estimated the average annual deposition of plastic and other debris by the wintering gull population into the lake.

MAIN RESULTS

86 % of pellets contained plastics, and 94 % contained other debris such as glass and textiles. Polyethylene (54 %), polypropylene (11.5 %) and polystyrene (11.5 %) were the main plastic polymers. An estimated annual mean of 400 kg of plastics were moved by gulls into the lake. Only 1 % of plastic mass was imported in faeces.

DISCUSSION

Incorporating the biovectoring role of birds can provide a more holistic view of the plastic cycle and waste management. Biovectoring is predictable in sites worldwide where gulls and other waterbirds feed in landfills and roost in wetlands. We discuss bird deterrence and other ways of mitigating debris leakage into aquatic ecosystems.

Pollutant levels in the waters of the industrial area of North Aceh and Lhokseumawe Regency, Indonesia

This research was conducted from June to August 2023. Data and samples were collected using an exploratory survey method in four locations around the industrial area, namely PT. ASEAN Aceh Fertilizer and PT. Kertas Kraft Aceh in North Aceh Regency, while PT. Pupuk Iskandar Muda and PT. Harun NGL in Lhokseumawe Regency, Indonesia. Observations of physico-chemical parameters including measurements of salinity, bicarbonate, calcium, magnesium, nitrate, nitrite, orthophosphate, total alkalinity, and total ammonia were analyzed in the Laboratory of PT Intraco Agroindustri, Langkat Regency, North Sumatra, Indonesia. Microplastic analysis was carried out at the Faculty of Marine and Fisheries, Universitas Syiah Kuala, Banda Aceh, Indonesia. The biological parameters measured in this research include the chlorophyll concentration in the water locations observed. Based on the results of the analysis, it shows that the calcium, magnesium, orthophosphate content at the four research locations has exceeded the quality standards, while the nitrate content is only at PT. ASEAN Aceh Fertilizer and PT. Kertas Kraft Aceh that exceeds the quality standards. The bicarbonate, nitrite, salinity, total alkalinity, and total ammonia content at the four research locations were under normal conditions. The chlorophyll content in the four research locations was categorized as low fertility (oligotrophic). Based on the analysis, it also shows that the four research locations were contaminated with microplastics with a range of 2.78-5.49 particles/l.

At second glance: The importance of strict quality control - A case study on microplastic in the Southern Ocean key species Antarctic krill, Euphausia superba

The stomach content of 60 krill specimens from the Southern Ocean were analyzed for the presence of microplastic (MP), by testing different sample volumes, extraction approaches, and applying hyperspectral imaging Fourier-transform infrared spectroscopy (μFTIR). Strict quality control was applied on the generated results. A high load of residual materials in pooled samples hampered the analysis and avoided a reliable determination of putative MP particles. Individual krill stomachs displayed reliable results, however, only after re-treating the samples with hydrogen peroxide. Before this treatment, lipid rich residues of krill resulted in false assignments of polymer categories and hence, false high MP particle numbers. Finally, MP was identified in 4 stomachs out of 60, with only one MP particle per stomach. Our study highlights the importance of strict quality control to verify results before coming to a final decision on MP contamination in the environment to aid the establishment of suitable internationally standardized protocols for sampling and analysis of MP in organisms including their habitats in Southern Ocean and worldwide.

Physical and cellular impact of environmentally relevant microplastic exposure on thermally challenged Pocillopora damicornis (Cnidaria, Scleractinia)

Microplastic pollution is an increasing threat to coral reefs, which are already strongly challenged by climate change-related heat stress. Although it is known that scleractinian corals can ingest microplastic, little is known about their egestion and how microplastic exposure may impair corals at physiological and cellular levels. In addition, the effects of microplastic pollution at current environmental concentration have been little investigated to date, particularly in corals already impacted by heat stress. In this study, the combined effects of these environmental threats on Pocillopora damicornis were investigated from a physical and cellular perspective. Colonies were exposed to three concentrations of polyethylene microplastic beads (no microplastic beads: [No MP], 1 mg/L: [Low MP]; 10 mg/L: [High MP]), and two different temperatures (25 °C and 30 °C) for 72 h. No visual signs of stress in corals, such as abnormal mucus production and polyp extroflection, were recorded. At [Low MP], beads adhered to colonies were ingested but were also egested. Moreover, thermally stressed colonies showed a lower adhesion and higher egestion of microplastic beads. Coral bleaching was observed with an increase in temperature and microplastic bead concentration, as indicated by a general decrease in chlorophyll concentration and Symbiodiniaceae density. An increase in lipid peroxidation was measured in colonies exposed to [Low MP] and [High MP] and an up-regulation of stress response gene hsp70 was observed due to the synergistic interaction of both stressors. Overall, our findings showed that heat stress still represents the main threat to P. damicornis, while the effect of microplastics on coral health and physiology may be minor, especially at control temperature. However, microplastics could exacerbate the effect of thermal stress on cellular homeostasis, even at [Low MP]. While reducing ocean warming is critical for preserving coral reefs, effective management of emerging threats like microplastic pollution is equally essential.

New versus naturally aged greenhouse cover films: Degradation and micro-nanoplastics characterization under sunlight exposure

The understanding of microplastic degradation and its effects remains limited due to the absence of accurate analytical techniques for detecting and quantifying micro- and nanoplastics. In this study, we investigated the release of nanoplastics and small microplastics in water from low-density polyethylene (LDPE) greenhouse cover films under simulated sunlight exposure for six months. Our analysis included both new and naturally aged (used) cover films, enabling us to evaluate the impact of natural aging. Additionally, photooxidation effects were assessed by comparing irradiated and non-irradiated conditions. Scanning electron microscopy (SEM) and nanoparticle tracking analysis (NTA) confirmed the presence of particles below 1 μm in both irradiated and non-irradiated cover films. NTA revealed a clear effect of natural aging, with used films releasing more particles than new films but no impact of photooxidation, as irradiated and non-irradiated cover films released similar amounts of particles at each time point. Raman spectroscopy demonstrated the lower crystallinity of the released PE nanoplastics compared to the new films. Flow cytometry and total organic carbon data provided evidence of the release of additional material besides PE, and a clear effect of both simulated and natural aging, with photodegradation effects observed only for the new cover films. Finally, our results underscore the importance of studying the aging processes in both new and used plastic products using complementary techniques to assess the environmental fate and safety risks posed by plastics used in agriculture.

Rapid biodegradation of microplastics generated from bio-based thermoplastic polyurethane

The accumulation of microplastics in various ecosystems has now been well documented and recent evidence suggests detrimental effects on various biological processes due to this pollution. Accumulation of microplastics in the natural environment is ultimately due to the chemical nature of widely used petroleum-based plastic polymers, which typically are inaccessible to biological processing. One way to mitigate this crisis is adoption of plastics that biodegrade if released into natural environments. In this work, we generated microplastic particles from a bio-based, biodegradable thermoplastic polyurethane (TPU-FC1) and demonstrated their rapid biodegradation via direct visualization and respirometry. Furthermore, we isolated multiple bacterial strains capable of using TPU-FC1 as a sole carbon source and characterized their depolymerization products. To visualize biodegradation of TPU materials as real-world products, we generated TPU-coated cotton fabric and an injection molded phone case and documented biodegradation by direct visualization and scanning electron microscopy (SEM), both of which indicated clear structural degradation of these materials and significant biofilm formation.

Microplastic pollution in waters of the Antarctic coastal environment of Potter Cove (25 de Mayo Island/King George Island, South Shetlands)

Plastic pollution in the Southern Ocean around Antarctica is a growing concern, but many areas in this vast region remain unexplored. This study provides the first comprehensive analysis of marine microplastic (MPs) concentrations in Potter Cove, located near the Argentinian Carlini research station on 25 de Mayo/King George Island, Antarctica. Water samples were collected at 14 sites within the cove, representing various influences from the station's activities. Two sampling methods were used: a 5 L Niskin bottle and an in-situ filtering device called Microfilter, allowing for large water volumes to be filtered. MPs were found in 100 % of the samples. Microfilter samples ranged from 0.02 to 2.14 MPs/L, with a mean concentration of 0.44 ± 0.44 MPs/L. Niskin bottle samples showed concentrations from 0.40 to 55.67 MPs/L, with a mean concentration of 19.03 ± 18.21 MPs/L. The dominant types of MPs were anthropogenic black, transparent, and pink microfibers (MFs) measuring between 0.11 and 3.6 mm (Microfilter) and 0.06 to 7.96 mm (Niskin bottle), with a median length of 0.01 mm for both methods. Transparent and black irregular microfragments (MFRs) with diameters from 0.10 to 5.08 mm and a median diameter of 0.49 mm were also prevalent. FTIR-spectroscopy revealed the presence of 14 types of polymers. Cellulose-based materials and polyethylene terephthalate were the most abundant in MFs, while polyurethanes and styrene-based copolymers dominated in MFRs. MPs were more abundant near the Carlini station. Compared to other coastal Antarctic areas, the MPs in the cove were relatively abundant and mostly smaller than 1 mm. Local activities on the island were identified as the primary source of MPs in the cove, and the cyclonic water circulation likely affects the distribution of small-sized particles. To protect the ecosystem, reducing plastic usage, improving waste management, regulating MPs debris, and enhancing wastewater practices are essential.

Revealing the long-term impact of photodegradation and fragmentation on HDPE in the marine environment: Origins of microplastics and dissolved organics

The extensive usage of high-density polyethylene (HDPE) materials in marine environments raises concerns about their potential contribution to plastic pollution. Various factors contribute to the degradation of HDPE in marine environments, including UV radiation, seawater hydrolysis, biodegradation, and mechanical stress. Despite their supposed long lifespans, there is still a lack of understanding about the long-term degradation mechanisms that cause weathering of seawater-exposed HDPE products. In this research, the impact of UV radiation on the degradation of HDPE pile sleeves was studied in natural as well as laboratory settings to isolate the UV effect. After nine years of exposure to the marine environment in natural settings, the HDPE pile sleeves exhibited an increase in oxygen-containing surface functional groups and more morphological changes compared to accelerated UVB irradiation in the laboratory. This indicated that combined non-UV mechanisms may play a major role in HDPE degradation than UV irradiation alone. However, UVB irradiation was found to release dissolved organic carbon and total dissolved nitrogen from HDPE pile sleeves, reaching levels of up to 15 mg/L and 2 mg/L, respectively. Our findings underscore the significance of taking into account both UV and non-UV degradation mechanisms when evaluating the role of HDPE in contributing to marine plastic pollution.

Effects of polystyrene, polyethylene, and polypropylene microplastics on the soil-rhizosphere-plant system: Phytotoxicity, enzyme activity, and microbial community

The widespread presence of soil microplastics (MPs) has become a global environmental problem. MPs of different properties (i.e., types, sizes, and concentrations) are present in the environment, while studies about the impact of MPs having different properties are limited. Thus, this study investigated the effects of three common polymers (polystyrene, polyethylene, and polypropylene) with two concentrations (0.01% and 0.1% w/w) on growth and stress response of lettuce (Lactuca sativa L.), soil enzymes, and rhizosphere microbial community. Lettuce growth was inhibited under MPs treatments. Moreover, the antioxidant system, metabolism composition, and phyllosphere microbiome of lettuce leaves was also perturbed. MPs reduced phytase activity and significantly increased dehydrogenase activity. The diversity and structure of rhizosphere microbial community were disturbed by MPs and more sensitive to polystyrene microplastics (PSMPs) and polypropylene microplastics (PPMPs). In general, the results by partial least squares pathway models (PLS-PMs) showed that the presence of MPs influenced the soil-rhizosphere-plant system, which may have essential implications for assessing the environmental risk of MPs.

Quantitative distribution and quantized ecological threat of microplastics in farmland: Shanghai as an example

The occurrence of microplastics (MPs) in farmlands poses a threat to soil health and crop yield. There needs to be more research on the role of cropping patterns in the accumulation of MPs and quantizing the threat of MPs on soil health and crop yield. In this study, a field study was carried out to explore the role of cropping patterns in the accumulation of MPs in agricultural soil in Shanghai, China. Furthermore, the specific effect and importance of MPs and each soil physicochemical indicator to soil health and crop yield were clarified, and the threat of MPs in reducing soil health and crop yield was quantized. Relative lower MPs abundance was detected in Shanghai. MPs abundance in vegetable fields was significantly higher than that in orchards. The broad source of MPs, the acceleration of plastics breaking under artificial disturbance and warmer temperatures, and the block of MPs exchange could account for the quicker accumulation of MPs in vegetable fields. MPs have a negligible effect on microbial diversity and metabolic activity which plays a role in soil enzyme activity. Besides, MPs served as one of the critical factors for rice yield reduction.

Airborne microplastics in urban, rural and wildland environments on the Tibetan Plateau

The concentration of airborne microplastics is largely unknown in the remote high mountain area of the Tibetan Plateau. Here we report airborne microplastic concentrations of 2.5-58.8 n/m3 in urban, rural and wildland areas across the Tibetan Plateau, with smaller (∼89% <100 µm) fragments (>80%) dominating. Polyethylene terephthalate, polyethylene, polyamide and polystyrene were the dominant polymers of airborne microplastics on the Tibetan Plateau. Distribution of airborne microplastics was positively correlated with anthropogenic activity indices, such as population density and nighttime light intensity. Although the contribution of long-range atmospheric transport is valid, dispersed villages also appear to be a source of airborne microplastics for wildland areas across the Tibetan Plateau.

Photodegradation of disposable polypropylene face masks: Physicochemical properties of debris and implications for the toxicity of mask-carried river biofilms

COVID-19 outbreak led to a massive dissemination of protective polypropylene (PP) face masks in the environment, posing a new environmental risk amplified by mask photodegradation and fragmentation. Masks are made up of a several kilometres long-network of fibres with diameter from a few microns to around 20 µm. After photodegradation, these fibres disintegrate, producing water dispersible debris. Electrokinetics and particle stability observations support that photodegradation increases/decreases the charge/hydrophobicity of released colloidal fragments. This change in hydrophobicity is related to the production of UV-induced carbonyl and hydroxyl reactive groups detectable after a few days of exposure. Helical content, surface roughness and specific surface area of mask fibres are not significantly impacted by photodegradation. Fragmentation of fibres makes apparent, at the newly formed surfaces, otherwise-buried additives like TiO2 nanoparticles and various organic components. Mortality of gammarids is found to increase significantly over time when fed with 3 days-UV aged masks that carry biofilms grown in river, which is due to a decreased abundance of microphytes therein. In contrast, bacteria abundance and microbial community composition remain unchanged regardless of mask degradation. Overall, this work reports physicochemical properties of pristine and photodegraded masks, and ecosystemic functions and ecotoxicity of freshwater biofilms they can carry.

Microplastic pollutants in water: A comprehensive review on their remediation by adsorption using various adsorbents

Microplastics (MPs), as emerging pollutants, have attracted the attention of environmentalists, statespersons, and the scientific community over the last few decades. To address the spread of MPs in the environment, it is imperative to develop various removal techniques and materials that are effective, scalable, and ecologically benign. However, to the best of our knowledge, no review has systematically examined the removal of MPs using adsorption or provided an in-depth discussion on various adsorbents. Adsorption is an inexpensive and effective technology for wastewater treatment. Recently, many researchers have conducted studies on MP remediation using diverse adsorbent materials, such as biochar, activated carbon, sponges, carbon nanotubes, metal-layered oxides, metal-organic frameworks (MOFs), and zeolites. Each adsorbent has advantages and disadvantages. To overcome their disadvantages, researchers have been designing and developing hybrid adsorbents for MP remediation. This review provides insights into these individual adsorbents and also discusses hybrid adsorbents for MP removal. Finally, the review elaborates on future possibilities and ways to enable more efficient, scalable, and environmentally friendly MP cleanup. Overall, this review bridges the gap between contemporary MP remediation using adsorption techniques and adsorbent development.

Effects of nanoplastics exposure on ingestion, life history traits, and dimethyl sulfide production in rotifer Brachionus plicatilis

Microplastics (MPs) and nanoplastics (NPs) have gained global concern due to their detrimental effects on marine organisms. We investigated the effects of 80 nm polystyrene (PS) NPs on life history traits, ingestion, and dimethyl sulfide (DMS) and dimethylsulfoniopropionate (DMSP) production in the rotifer Brachionus plicatilis. Fluorescently labeled 80 nm PS NPs were ingested by the rotifer B. plicatilis and accumulated in the digestive tract. The lethal rates of B. plicatilis exposed to NPs were dose-dependent. High concentrations of PS NPs exposure had negative effects on developmental duration, leading to prolonged embryonic development and pre-reproductive periods, shortened reproductive period, post-reproductive period, and lifespan in B. plicatilis. High concentrations of PS NPs exposure inhibited life table demographic parameters such as age-specific survivorship and fecundity, generation time, net reproductive rate, and life expectancy. Consequently, the population of B. plicatilis was adversely impacted. Furthermore, exposure to PS NPs resulted in a reduced ingestion rate in B. plicatilis, as well as a decreased in DMS, particulate DMSP (DMSPp) concentration, and DMSP lyase activity (DLA), which exhibited a dose-response relationship. B. plicatilis grazing promoted DLA and therefore increased DMS production. PS NPs exposure caused a decline in the increased DMS induced by rotifer grazing. Our results help to understand the ecotoxicity of NPs on rotifer and their impact on the biogeochemical cycle of dimethylated sulfur compounds.

Effect of tidal current on the settling and accumulation of microplastics in the Chao Phraya River estuary, Thailand

The deposition of MPs in a water column and surface sediment during a mixed spring tidal cycle of the Chao Phraya River estuary was investigated. The settling MPs during flood and ebb tides were collected by deploying traps at 3 m below the surface, while the settled MPs throughout the tidal cycle were collected by deploying traps at 1 m above the bottom. The settling rate of MPs was 2168 pieces/m2/h during highest to low tide, and 639 pieces/m2/h during high to lowest tide. The deposition rate of MPs after the end of the tidal cycle was 3172 pieces/m2/day, while the accumulation rate of MPs in the surface sediment was 1515 pieces/m2/day. The settling MPs tended to decrease inversely to the suspended solids and salinity. The major types of the deposited MPs were polyethylene (36 %) and polyamide (33 %), while that of the surface sediment was epoxy resin (80 %).

Microplastics' toxic effects and influencing factors on microorganisms in biological wastewater treatment units

Prior to entering the water body, microplastics (MPs) are mostly collected at the sewage treatment plant and the biological treatment unit is the sewage treatment facility's central processing unit. This review aims to present a comprehensive analysis of the detrimental impacts of MPs on the biological treatment unit of a sewage treatment plant and it covers how MPs harm the effluent quality of biological treatment processes. The structure of microbial communities is altered by MPs presence and additive release, which reduces functional microbial activity. Extracellular polymers, oxidative stress, and enzyme activity are explored as micro views on the harmful mechanism of MPs on microorganisms, examining the toxicity of additives released by MPs and the harm caused to microorganisms by harmful compounds that have been adsorbed in the aqueous environment. This article offers a theoretical framework for a thorough understanding of the potential problems posed by MPs in sewage treatment plants and suggests countermeasures to mitigate those risks to the aquatic environment.

From cracks to secondary microplastics - surface characterization of polyethylene terephthalate (PET) during weathering

Secondary microplastics are a product of the fragmentation of plastic debris. Despite concerns regarding the omnipresence of microplastics in the environment, knowledge about the mechanics of their actual formation is still limited. Fragmentation is usually linked to weathering, which alters the properties of the plastic and allows fragmentation to occur. Therefore, in this study, polyethylene terephthalate (PET) samples were exposed to artificial UV light or a combination of UV light and water for a total of three months to simulate natural weathering. The samples included three forms of PET with different production histories: pellets, yarns, and films. The surface alterations to the samples during weathering were characterized using scanning electron microscopy and Raman spectroscopy. Results indicated that the three different types of PET developed markedly different surface defects and also exhibited signs of weathering within different time frames. Differences were also found between samples exposed only to UV and those exposed to UV and submerged in water. In water, the first surface changes were spotted within 30 days of initial submersion and later developed into an organized crack network. Upon the introduction of mild mechanical forces, pieces of the weathered surface started to delaminate. The fragments from films had an elongated shape with a median size of 16.1 × 2.1 × 1.8 μm, resembling a fibre. If the weathered surface of a film were to detach completely, it could create 1.4-7.9 million microplastic fragments/cm2. For pellets, this number would range between 0.4 and 2.2 million microplastics/cm2. In addition to particle formation by surface delamination, particles also emerged on the weathered surfaces of all studied samples, presenting another possible source of micro-sized particles during weathering. Overall, the results of this work show that the weathering of plastics and the formation of microplastics are heavily influenced not only by the weathering mechanism but also by the type and production history of the polymers.

Adsorption behavior and interaction mechanism of microplastics with typical hydrophilic pharmaceuticals and personal care products

Microplastics (MPs) and pharmaceuticals and personal care products (PPCPs) are two types of emerging contaminants widely present in the global aquatic ecosystem. The ecological risks associated with the coexistence of these two contaminants have garnered increasing attention from researchers. In this study, we selected 15 typical hydrophilic PPCPs, including Sulfacetamide (SA), Thiamphenicol, Florfenicol, Chloramphenicol (CHL), Ampicillin, Cephalexin, Ofloxacin, Fluorouracil, Phenytoin, Theophylline, Cimetidine, Methylparaben, Diethyltoluamide, Benzophenone-2 (BP-2), and Benzophenone-4, as adsorbates. We evaluated the adsorption potential of five traditional plastics (TPs), namely Polyamide 6 (PA6), Polystyrene (PS), Polyethylene terephthalate (PET), Polyvinyl chloride (PVC), and Polyurethane (TPU), as well as three biodegradable plastics (BDPs), including Polylactic acid (PLA), Polybutylene succinate (PBS), and Poly (ε-caprolactone) (PCL), for these adsorbates. Out of the 120 combinations of MPs and PPCPs tested, only 24 exhibited significant adsorption behavior. Notably, the adsorption performance of the three BDPs was stronger than that of the three typical TPs (PS, PET, and PVC). Based on their adsorption potential, PA6, BDPs, phenytoin, and BP-2 were identified as potential sources of high ecological risk. To further explore the adsorption mechanism, we investigated the adsorption behaviors of SA, BP-2, and CHL on PA6. The conclusions were as follows: SA, BP-2, and CHL all reached adsorption equilibrium within 24 h, with the partition coefficient (Kd) following this order: BP-2 (8.051) ≫ SA (0.052) > CHL (0.018). The primary forces of adsorption were electrostatic interactions, intermolecular hydrogen bonding, and hydrophobic interaction, respectively. Additionally, weak electrostatic effects were observed in the adsorption of CHL and BP-2. The effects of pH, ionic strength, and fulvic acid on adsorption capacity varied. These results highlight a complex adsorption mechanism between MPs and hydrophilic contaminants in the aquatic environment. This study provides a basis for further evaluating the ecological risks of MPs and PPCPs combined pollution.

Microplastic pollution on historic facades: Hidden 'sink' or urban threat?

Despite the increasing concerns surrounding the health and environmental risks of microplastics (MPs), the research focus has primarily been on their prevalence in air and the oceans, consequently neglecting their presence on urban facades, which are integral to our everyday environments. Therefore, there is a crucial knowledge gap in comprehending urban MP pollution. Our pioneering interdisciplinary study not only quantifies but also identifies MPs on historic facades, revealing their pervasive presence in a medium-sized urban area in the UK. In this case study, we estimated a mean density of 975,000 fibres/m^2 (0.10 fibres/mm^2) for fibre lengths between 30 and 1000 μm with a ratio of 1:5 for natural to artificial fibres. Our research identifies three groups of fibre length frequencies across varied exposure scenarios on the investigated urban facade. Sheltered areas (4m height) show a high prevalence of 60-120 μm and 180-240 μm fibres. In contrast, less sheltered areas at 3m exhibit lower fibre frequencies but similar lengths. Notably, the lowest area (2-1.5m) features longer fibres (300-1000 μm), while adjacent area S, near a faulty gutter, shows no fibres, highlighting the impact of exposure, altitude, and environmental variables on fibre distribution on urban facades. Our findings pave one of many necessary paths forward to determine the long-term fate of these fibres and provoke a pertinent question: do historic facades serve as an urban 'sink' that mitigates potentially adverse health impacts or amplifies the effects of mobile microplastics? Addressing MP pollution in urban areas is crucial for public health and sustainable cities. More research is required to understand the multi-scale factors behind MP pollution in large cities and to find mitigation strategies, paving the way for effective interventions and policies against this growing threat.

Microplastics research in Nepal: Present scenario and current gaps in knowledge

The topic of microplastics has drawn considerable scholarly interest in recent times. The objective of this study is to provide an overview of the current state of microplastic pollution research in Nepal and to make future research recommendations. To achieve the objective, three popular databases (Web of Science, SCOPUS and Google Scholar) were used. The results showed that the current scenario for microplastic research in Nepal is in its early stage, which commenced in 2020. A total of six papers were recorded over the period from 2020 to 2023. The research conducted in the fields were rivers, lakes, snow, and sediments. Studies have provided evidence of the occurrence of microplastics in diverse aquatic ecosystems. Lakeshore sediments show concentrations of 100.5 ± 58.6 items/kg dry weight, while shoreline sediments of Phewa lake exhibit variability between 55 and 122.5 items/kg. The lake water in winter records 2.96 ± 1.83 Microplastics per Liter (MPs/L), river water indicates 202 ± 100 items/m3, and snow demonstrates 30 MP/L. In freshwater ecosystems, microplastics, specifically fibers, were found to be the prevailing type, while fragments were recorded in road dust. The study conducted in Nepal provided evidence of the presence of a wide range of polymers. The polymers encompassed polypropylene (PP), polyethylene (PE), polyethylene terephthalate (PET), polyamide, polystyrene (PS), and polyester. Microplastic research in Nepal, initiated in 2020, covered rivers, lakes, snow, and sediments. Diverse aquatic ecosystems reveal microplastic presence, emphasizing the need for continued study and awareness. Although extensive research has been carried out on the subject of microplastic contamination and its effects on various creatures on a global scale, an examination of the implications of microplastics on animals, plants, and humans in Nepal has not been found in any scholarly publications. There exists a noticeable deficit of research investigating the consumption of microplastics by human.

The Occurrence of Microplastics in Donax trunculus (Mollusca: Bivalvia) Collected along the Tuscany Coast (Mediterranean Sea)

Microplastics (MPs) (0.1 µm-5 mm particles) have been documented in oceans and seas. Bivalve molluscs (BMs) can accumulate MPs and transfer to humans through the food chain. BMs (especially mussels) are used to assess MPs' contamination, but the genus Donax has not been thoroughly investigated. The aim of this study was to detect and characterize MPs in D. trunculus specimens collected along the Tuscan coast (Italy), and to assess the potential risk for consumers. The samples (~10 g of tissue and intervalval liquid from 35 specimens) were digested using a solution of 10% KOH, subjected to NaCl density separation, and filtered through 5 μm pore-size filters. All items were morphologically classified and measured, and their mean abundance (MA) was calculated. Furthermore, 20% of them were analyzed by Raman spectroscopy and, based on the obtained results, the MA was recalculated (corrected MA) and the annual human exposure was estimated. In the 39 samples analyzed, 85 items fibers (n = 45; 52.94%) and fragments (n = 40; 47.06%) were found. The MA was 0.23 ± 0.17 items/grww. Additionally, 83.33% of the items were confirmed as MPs (polyethylene and polyethylene terephthalate). Based on the correct MA (0.18 MPs/grww), D. trunculus consumers could be exposed to 19.2 MPs/per capita/year. The health risk level of MPs was classified as level III (moderate).

Quantifying the Chemical Composition and Real-Time Mass Loading of Nanoplastic Particles in the Atmosphere Using Aerosol Mass Spectrometry

Plastic debris, including nanoplastic particles (NPPs), has emerged as an important global environmental issue due to its detrimental effects on human health, ecosystems, and climate. Atmospheric processes play an important role in the transportation and fate of plastic particles in the environment. In this study, a high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS) was employed to establish the first online approach for identification and quantification of airborne submicrometer polystyrene (PS) NPPs from laboratory-generated and ambient aerosols. The fragmentation ion C8H8+ is identified as the major tracer ion for PS nanoplastic particles, achieving an 1-h detection limit of 4.96 ng/m3. Ambient PS NPPs measured at an urban location in Texas are quantified to be 30 ± 20 ng/m3 by applying the AMS data with a constrained positive matrix factorization (PMF) method using the multilinear engine (ME-2). Careful analysis of ambient data reveals that atmospheric PS NPPs were enhanced as air mass passed through a waste incinerator plant, suggesting that incineration of waste may serve as a source of ambient NPPs. The online quantification of NPPs achieved through this study can significantly improve our understanding of the source, transport, fate, and climate effects of atmospheric NPPs to mitigate this emerging global environmental issue.

Removal of polystyrene microplastics using biochar-based continuous flow fixed-bed column

In the realm of environmental challenges, microplastics have emerged as a pressing threat, presenting risks to both individuals and ecosystems. Conventional treatment plants are presently not equipped for effectively removing these minute contaminants. This study presents an investigation into the potential of a continuous flow biochar column, utilizing biochar derived from banana peel through a nitrogen-free slow pyrolysis process for the removal of microplastics. A systematic exploration of various parameters, including bed height, flow rate, inflow microplastic concentration, and microplastic size is undertaken to discern their impact on polystyrene removal efficiency. A peak removal efficiency of 92.16% has been achieved under specific conditions: a 6-cm bed height, a 3-mL/min flow rate, an inlet concentration of 0.05 g/L, and microplastic sizes ranging from 150 to 300 µm. The removal efficiency was inversely affected by flow rate while directly influenced by bed height. To deepen the understanding of polystyrene removal on biochar, a detailed characterization of the synthesized material was carried out. The removal of microplastics by banana peel biochar (BPB) is observed to be dominated by adsorption and filtration processes. The entanglement of microplastics with minuscule biochar granules, capture between particles, and entrapment in the porous system were identified as the mechanisms of removal. Leveraging the hydrophobic nature of polystyrene microplastics, interactions with the hydrophobic functional groups in BPB result in effective adsorption. This is further complemented by self-agglomeration and filtration mechanisms that synergistically contribute to the elimination of larger agglomerates. The findings thus provide a comprehensive understanding, offering hope for a more effective strategy in mitigating the environmental impact of microplastics.

Evaluation of microplastic bioaccumulation capacity of mussel (Perna viridis) and surrounding environment in the North coast of Vietnam

This study aimed to identify the presence of microplastics in green mussels (Perna viridis), surface seawater, and beach sediment on the North Coast of Vietnam. The average concentration of MPs in mussels was 3.67 ± 1.20 MPs/g wet weight and 25.05 ± 5.36 MPs/individual. Regarding surface seawater and beach sediments, the MPs concentration was found at 88.00 ± 30.88 MPs/L and 4800 ± 1776 MPs/kg dry weight, respectively. The dominant microplastics shape was fragment with the fractions ranging from 69.86 to 82.41 %. In addition, the size distribution of MPs was mostly in the range of smaller than 50 μm and 1-150 μm (34.17 % and 45.62 % in mussels; 29.65 % and 43.20 % in surface seawater and 40.22 % and 39.40 % in beach sediment, respectively). Polyethylene terephthalate was the major polymer types 49.93-58.44 % of the detected MPs. The risk assessment results based on the polymer types indicated a warning level in several sites.

The adsorption and release mechanism of different aged microplastics toward Hg(II) via batch experiment and the deep learning method

Aged microplastics are ubiquitous in the aquatic environment, which inevitably accumulate metals, and then alter their migration. Whereas, the synergistic behavior and effect of microplastics and Hg(II) were rarely reported. In this context, the adsorptive behavior of Hg(II) by pristine/aged microplastics involving polystyrene, polyethylene, polylactic acid, and tire microplastics were investigated via kinetic (pseudo-first and second-order dynamics, the internal diffusion model), Langmuir, and Freundlich isothermal models; the adsorption and desorption behavior was also explored under different conditions. Microplastics aged by ozone exhibited a rougher surface attached with abundant oxygen-containing groups to enhance hydrophilicity and negative surface charge, those promoted adsorption capacity of 4-20 times increment compared with the pristine microplastics. The process (except for aged tire microplastics) was dominated by a monolayer chemical reaction, which was significantly impacted by pH, salinity, fulvic acid, and co-existing ions. Furthermore, the adsorbed Hg(II) could be effectively eluted in 0.04% HCl, simulated gastric liquids, and seawater with a maximum desorption amount of 23.26 mg/g. An artificial neural network model was used to predict the performance of microplastics in complex media and accurately capture the main influencing factors and their contributions. This finding revealed that aged microplastics had the affinity to trap Hg(II) from freshwater, whereafter it released the Hg(II) once transported into the acidic medium, the organism's gastrointestinal system, or the estuary area. These indicated that aged microplastics could be the sink or the source of Hg(II) depending on the surrounding environment, meaning that aged microplastics could be the vital carrier to Hg(II).

A threshold model of plastic waste fragmentation: New insights into the distribution of microplastics in the ocean and its evolution over time

Plastic pollution in the aquatic environment has been assessed for many years by ocean waste collection expeditions around the globe or by river sampling. While the total amount of plastic produced worldwide is well documented, the amount of plastic found in the ocean, the distribution of particles on its surface and its evolution over time are still the subject of much debate. In this article, we propose a general fragmentation model, postulating the existence of a critical size below which particle fragmentation becomes extremely unlikely. In the frame of this model, an abundance peak appears for sizes around 1 mm, in agreement with real environmental data. Using, in addition, a realistic exponential waste feed to the ocean, we discuss the relative impact of fragmentation and feed rates, and the temporal evolution of microplastics (MP) distribution. New conclusions on the temporal trend of MP pollution are drawn.

The processes and transport fluxes of land-based macroplastics and microplastics entering the ocean via rivers

Approximately 80% of marine plastic waste originates from land-based sources and enters oceans through rivers. Hence, to create effective regulations, it is crucial to thoroughly examine the processes by which land-based plastic waste flows into marine environments. To this end, this review covers the complete journey of macro- and microplastics from their initial input into rivers to their ultimate release into oceans. Here, we also discuss the primary influencing factors and current popular research topics. Additionally, the principles, applicability, accuracy, uncertainty, and potential improvement of the standard methods used for flux estimation at each stage are outlined. Emission estimates of land-based macro- and microplastics are typically assessed using the emission factor approach, coefficient accounting approach, or material flow analysis. Accurately estimating mismanaged plastic waste is crucial for reducing uncertainty in the macroplastic emission inventory. In our review of the processes by which land-originating plastics enter rivers, we categorized them into two major types: point-source and diffuse-source pollution. Land surface hydrological models simulate transport from diffuse sources to rivers, necessitating further research. Riverine (micro)plastic flux to the ocean is often estimated using monitoring statistics and watershed hydrological models at the watershed scale; however, standardized monitoring methods have not yet been established. At the global scale, algorithms based on river datasets are often used, which require further improvements in river data selection and microplastic number-mass conversion factors. Furthermore, the article summarizes the accuracy and sources of uncertainty of various methods. Future research efforts should focus on quantifying and mitigating uncertainties in resultant projections. Overall, this review deepens our understanding of the processes by which land-based plastic waste enters the ocean and helps scholars efficiently select or improve relevant methods when studying land-ocean transport fluxes.

Characteristics of microplastic-derived dissolved organic matter and its binding with pharmaceuticals unveiled by fluorescence spectroscopy and two-dimensional correlation spectroscopy

Microplastics were an extensively detected pollutant in the environment, but microplastic-derived dissolved organic matter (MP-DOM) has received less attention, much less its impact on the binding behavior of pollutants (e.g., pharmaceuticals). In this study, DOM derived from two typical MPs, i.e., polyethylene terephthalate (PET) and polystyrene (PS) was generated by UV irradiation (a widely used way for MPs' aging treatment) and characterized by multiple spectroscopic techniques and methods. Chloramphenicol (CAP) and carbamazepine (CBZ) were selected to investigate the binding mechanism between MP-DOM and pharmaceuticals. After UV irradiation, the concentration of the dissolved organic carbon, colored DOM, and carboxyl/carbonyl groups of MP-DOM increased. Moreover, the humic-like substance released preceding and more under UV irradiation. Furthermore, the protein-like substances on PET-DOM and the humic-like substances on PS-DOM were positively correlated to the binding capacity to the pharmaceuticals, respectively. 2D-COS results revealed that the fluorescent materials having more oxygen-containing functional groups for MP-DOM preferentially interacted with the pharmaceuticals. Overall, the higher fluorescence quenching was related to the protein-like substance, CBZ, and PET-DOM as compared to the humic-like substance, CAP, and PS-DOM. It was verified by the relatively high binding ability (logKM) for them (the protein-like substance: 5.15; CBZ: 4.61; PET: 4.48). This study first proved the environmental reactivity of MP-DOM to the pharmaceuticals highlighting the significance of the spectral properties for the binding behavior of MP-DOM with pharmaceuticals and the competitive sorption role of MP-DOM to the pollutants in the natural environment.

Interactions between microplastics and insects in terrestrial ecosystems-A systematic review and meta-analysis

The presence of microplastics (MPs) in terrestrial ecosystems has been confirmed worldwide. Due to their widespread distribution and diversity in habitats, insects will readily interact with MPs via various pathways. Although the topic of MP-insect interactions is still in the early stages of research, it is becoming increasingly important. We used a META approach with phylogenetic control and subgroup examination to summarize the evidence from both field and laboratory experiments in quantitative form. The field evidence suggests that insects can take and transfer MPs along food chains via ingestion and adherence. Also, they are active in the bio-fragmentation of MPs and the generation of secondary pollutants. The exposure to MPs impaired key biological traits of insects, mainly their behavior and health, such as reducing climbing ability and increasing oxidative stress. In terms of exposure conditions, the small-sized MPs can induce more severe effects on the insects, while the insect response to MPs was not significantly reliant on exposure times or MP concentrations based on the current evidence available. We propose that insects not only play roles in the redistribution of MPs spatially and in food chains via bio-fragmentation but are also threatened by MPs. Our research deepens our understanding of the environmental risks posed by MPs in insect ecosystems.

Effects of microplastics on cold seep sediment prokaryotic communities

Cold seep sediments are an important reservoir of microplastics (MPs) whose impact on the structure and function of prokaryotic community is not well understood. In this study, the impact of 0.2% and 1% (w/w) polyethylene (PE), polystyrene (PS), and polypropylene (PP) MPs on the cold seep sediment prokaryotic community was investigated in a 120-day laboratory incubation experiment. The results revealed that exposure to MPs altered sedimentary chemical properties in a type- and concentration-dependent manner. Furthermore, MPs significantly altered the structure of bacterial community, with some MPs degradation-associated bacterial phyla significantly increasing (p < 0.05). However, in the case of archaea, the changes in the structure of microbial community were less pronounced (p > 0.05). Co-occurrence network analysis revealed that the addition of MPs reduced the network complexity, while PICRUSt2 and FAPROTAX analyses suggested that 0.2% PP and 1% PS MPs had the most significant effects on the nitrogen and carbon cycles (p < 0.05). Overall, this study provides new insights into the effects of MPs on the structure and function of microbial communities in cold seep sediments.

Meso- and microplastic composition, distribution patterns and drivers: A snapshot of plastic pollution on Brazilian beaches

Pollution by plastics is a worldwide problem on par with climatic change and biological invasions. In coastal sediments, plastic particles tend to accumulate and persist over the long term. We assessed the plastic pollution using a standardized surface sediment sampling protocol on 22 sandy beaches along >4600 km of the Brazilian coast. The abundance, size, color, type, and polymeric composition of all meso- and microplastic items found in the surveys were processed to disclose spatial patterns of distribution and pollution associated drivers. A General Linear Model (GLM) was run to investigate how the predictor variables influenced overall beach plastic amounts and by plastic type and size class. Overall, 3114 plastic items were found, with microplastics comprising just over half of all items (54 %). Most items were either white (60 %) or blue (13 %), while polystyrene foam (45 %) and fragments (39 %) comprised the most abundant plastic types. The principal polymers were Polyethylene (40 %) and Polypropylene (32 %). The analyses indicated that the distribution of plastic litter along beaches is determined by three predictive variables: the distance to the nearest estuary (-), tourism (+), and the number of inhabitants in the nearest urban center (+). Tourist (highly-visited) beaches and those near estuarine runoffs or urban centers presented the highest plastic pollution rates. The unveiling of plastic pollution patterns through a large-scale systematic survey is essential for future management guidance and science-based decisions for mitigating and solving the plastic pollution crisis.

Microbial metabolism influences microplastic perturbation of dissolved organic matter in agricultural soils

An estimated 258 million tons of plastic enter the soil annually. Joining persistent types of microplastic (MP), there will be an increasing demand for biodegradable plastics. There are still many unknowns about plastic pollution by either type, and one large gap is the fate and composition of dissolved organic matter (DOM) released from MPs as well as how they interact with soil microbiomes in agricultural systems. In this study, polyethylene MPs, photoaged to different degrees, and virgin polylactic acid MPs were added to agricultural soil at different levels and incubated for 100 days to address this knowledge gap. We find that, upon MP addition, labile components of low aromaticity were degraded and transformed, resulting in increased aromaticity and oxidation degree, reduced molecular diversity, and changed nitrogen and sulfur contents of soil DOM. Terephthalate, acetate, oxalate, and L-lactate in DOM released by polylactic acid MPs and 4-nitrophenol, propanoate, and nitrate in DOM released by polyethylene MPs were the major molecules available to the soil microbiomes. The bacteria involved in the metabolism of DOM released by MPs are mainly concentrated in Proteobacteria, Actinobacteriota, and Bacteroidota, and fungi are mainly in Ascomycota and Basidiomycota. Our study provides an in-depth understanding of the microbial transformation of DOM released by MPs and its effects of DOM evolution in agricultural soils.

Microplastic pollution in terrestrial ecosystems: Global implications and sustainable solutions

Microplastic (MPs) pollution has become a global environmental concern with significant impacts on ecosystems and human health. Although MPs have been widely detected in aquatic environments, their presence in terrestrial ecosystems remains largely unexplored. This review examines the multifaceted issues of MPs pollution in terrestrial ecosystem, covering various aspects from additives in plastics to global legislation and sustainable solutions. The study explores the widespread distribution of MPs worldwide and their potential antagonistic interactions with co-occurring contaminants, emphasizing the need for a holistic understanding of their environmental implications. The influence of MPs on soil and plants is discussed, shedding light on the potential consequences for terrestrial ecosystems and agricultural productivity. The aging mechanisms of MPs, including photo and thermal aging, are elucidated, along with the factors influencing their aging process. Furthermore, the review provides an overview of global legislation addressing plastic waste, including bans on specific plastic items and levies on single-use plastics. Sustainable solutions for MPs pollution are proposed, encompassing upstream approaches such as bioplastics, improved waste management practices, and wastewater treatment technologies, as well as downstream methods like physical and biological removal of MPs. The importance of international collaboration, comprehensive legislation, and global agreements is underscored as crucial in tackling this pervasive environmental challenge. This review may serve as a valuable resource for researchers, policymakers, and stakeholders, providing a comprehensive assessment of the environmental impact and potential risks associated with MPs.

Polystyrene microplastics accumulation in lab-scale vertical flow constructed wetlands: impacts and fate

Microplastics (MPs) are ubiquitous pollutants that significantly threaten organisms and ecosystems. Constructed wetlands (CWs), a nature-based treatment technology, can effectively remove MPs from wastewater. However, the responses of CWs when exposed to MPs remain unclear. In this study, lab-scale vertical flow constructed wetlands (VFCWs) were installed for receiving polystyrene (PS) MPs at concentrations of 100 μg/L and 1000 μg/L. The results showed that exposure to PS-MPs has no effects on COD and TP removal in VFCWs, but TN removal decreased by 3.69-5.37 %. Further investigation revealed that PS-MPs significantly impacted microbial communities and metabolic functions. The abundances of predominant nitrifiers (Nitrospira and Nitrosomonas) and denitrifiers (Nakamurella, Bradyrhizobium, and Bacillus) in VFCWs were significantly reduced, aligning with the responses of key enzymes. The presence of PS-MPs also decreased nitrogen removal by plant uptake, leading to decreased plant biomass and chlorophyll by 39.32-48.75 % and 5.92-32.19 %, respectively. Notably, > 90 % removal rates were observed for PS-MPs within VFCWs. In addition to PS-MPs interception by VFCWs substrate, the increase of released benzenes indicated that the PS-MPs biodegradation occurred. Such insights are vital for developing sustainable solutions to mitigate MPs' adverse effects on ecosystems.

Microplastics exposure: implications for human fertility, pregnancy and child health

Plastics found in our everyday environment are becoming an increasing concern for individual and population-level health, and the extent of exposure and potential toxic effects of these contaminants on numerous human organ systems are becoming clear. Microplastics (MPs), tiny plastic particles, appear to have many of the same biological effects as their plastic precursors and have the compounded effect of potential accumulation in different organs. Recently, microplastic accumulation was observed in the human placenta, raising important questions related to the biological effects of these contaminants on the health of pregnancies and offspring. These concerns are particularly heightened considering the developmental origins of health and disease (DOHaD) framework, which postulates that in utero exposure can programme the lifelong health of the offspring. The current review examines the state of knowledge on this topic and highlights important avenues for future investigation.

Molecular effects of polystyrene nanoplastics on human neural stem cells

Nanoplastics (NPs) have been found in many ecological environments (aquatic, terrestrial, air). Currently, there is great concern about the exposition and impact on animal health, including humans, because of the effects of ingestion and accumulation of these nanomaterials (NMs) in aquatic organisms and their incorporation into the food chain. NPs´ mechanisms of action on humans are currently unknown. In this study, we evaluated the altered molecular mechanisms on human neural stem cell line (hNS1) after 4 days of exposure to 30 nm polystyrene (PS) NPs (0.5, 2.5 and 10 μg/mL). Our results showed that NPs can induce oxidative stress, cellular stress, DNA damage, alterations in inflammatory response, and apoptosis, which could lead to tissue damage and neurodevelopmental diseases.

Legacy and emerging contaminants in marine mammals from Argentina

Marine mammals are recognized sentinels of ecosystem health. They are susceptible to the accumulation and biomagnification of pollutants, which constitute one of the greatest threats to their survival. Legacy, such as organochlorine pesticides, and emerging contaminants, like microplastics and pharmaceuticals, may have effects on marine mammals' health at individual and population levels. Therefore, the evaluation of the risks associated with pollutants in this group is of great importance. The aim of this review is to provide information on the occurrence of legacy and emerging contaminants in marine mammals that inhabit Argentine waters. Also, to identify knowledge gaps and suggest best practices for future research. Reports of legacy contaminants referring to organochlorine pesticides and polychlorinated biphenyls were found in five species of cetaceans and two of pinnipeds. With respect to emerging pollutants, the presence of plastics was only evaluated in three species. Reported data was from at least a decade ago. Therefore, it is necessary to update existing information and conduct continuous monitoring to assess temporary trends in pollutants. All the studies were carried out in the province of Buenos Aires and Northern Patagonia indicating a knowledge gap in the southern zone of the Argentine Sea. In addition, pollutants of global environmental concern that have not been studied in Argentina are discussed. Future studies should fill these gaps and a greater effort to understand the relationships between pollutants and their effects on marine mammals is suggested. This issue will make it possible to determine thresholds for all the substances and species evaluated in order to carry out more detailed risk assessments and make decisions for the conservation of marine mammals in Argentine waters.

[Preparation of Nanoplastic Particles as Potential Standards for the Study of Nanoplastics]

Nanoplastics (NPs) are plastic fragments that are small enough to be absorbed by organisms through ingestion or inhalation. Recent studies indicate that nanoplastics can be ubiquitous in the environment, and there are growing concerns regarding the impacts of nanoplastics on the health of humans and other organisms. However, quantitative information on nanoplastics in the environment is still very limited, and most previous toxicity studies have used only polystyrene (PS) particles because of a lack of appropriate model particles of other plastics. We developed a nanoprecipitation-based method for the preparation of nanoplastic particles of five major polymers: low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), polyvinyl chloride (PVC), and polystyrene. A major advantage of our method is that the nanoplastic particles are prepared without using reagents that can remain in the particles as impurities. Analysis of the prepared particles' molecular weight (Mw) distributions, crystallinities, and thermal properties revealed that their compositions and constitutions were within the general ranges for commercial products. The mechanisms underlying the formation of low-density polyethylene particles via our method were investigated by means of a simple population balance model, and particle diameter was found to be linearly correlated with the suspension density of the nanoplastic dispersion up to 0.4 mg·mL-1. Future studies should focus on improving our method to allow for precise, scale-independent production of nanoplastic particles. Methods for the preparation of labeled particles are also needed so that such particles can be used in nanoplastic risk assessments.

Microplastic contamination in edible marine fishes from the upper Gulf of Thailand

Seafood consumption is a major source of microplastic exposure for humans. Here, we demonstrated microplastic contamination in marine food fishes from the upper Gulf of Thailand. Microplastics were found in gastrointestinal tracts of 46.9 % of fishes sampled, with a mean concentration of 1.6 ± 0.5 pieces per fish or 0.04 ± 0.01 pieces/g of fish tissue. Demersal fishes had higher contamination rates than pelagic fishes. Fibrous-type and blue-colored materials were the most abundant microplastics, while the most common polymers were polyester and polyethylene. No associations between microplastics and histopathological changes were detected. Estimated daily microplastic exposure for human marine fish consumers was 0.03 to 0.1 pieces per person. Although we expect a low risk of microplastic contamination in fish muscle because of very low calculated transfer rates, we recommend continuing surveillance, including evaluations of contamination in the food chain to ensure future seafood safety in this region.

Leaching of chemicals from microplastics: A review of chemical types, leaching mechanisms and influencing factors

It is widely known that microplastics are present everywhere and they pose certain risks to the ecosystem and humans which are partly attributed to the leaching of additives and chemicals from them. However, the leaching mechanisms remain insufficiently understood. This review paper aims to comprehensively and critically illustrate the leaching mechanisms in biotic and abiotic environments. It analyzes and synthesizes the factors influencing the leaching processes. It achieves the aims by reviewing >165 relevant scholarly papers published mainly in the past 10 years. According to this review, flame retardants, plasticizers and antioxidants are the three main groups of additives in microplastics with the potentials to disrupt endocrine functions, reproduction, brain development and kidney functions. Upon ingestion, the MPs are exposed to digestive fluids containing enzymes and acids which facilitate their degradation and leaching of chemicals. Fats and oils in the digestive tracts also aid the leaching and transport of these chemicals particularly the fat-soluble ones. Leaching is highly variable depending on chemical properties and bisphenols leach to a larger extent than other endocrine disrupting chemicals. However, the rates of leaching remain poorly understood, owing probably to multiple factors at play. Diffusion and partitioning are two main mechanisms of leaching in biotic and abiotic environments. Photodegradation is more predominant in the latter, generating reactive oxygen species which cause microplastic aging and leaching with minimal destruction of the chemicals leached. Effects of microplastic sizes on leaching are governed by Sherwood number, thickness of aqueous boundary layer and desorption half-life. This review contributes to better understanding of leaching of chemicals from microplastics which affect their ecotoxicities and human toxicity.

Leaching and transformation of chemical additives from weathered plastic deployed in the marine environment

Plastic pollution causes detrimental environmental impacts, which are increasingly attributed to chemical additives. However, the behaviour of plastic additives in the marine environment is poorly understood. We used a marine deployment experiment to examine the impact of weathering on the extractables profile, analysed by liquid chromatography-mass spectrometry, of four plastics at two locations over nine months in Aotearoa/New Zealand. The concentration of additives in polyethylene and oxo-degradable polyethylene were strongly influenced by artificial weathering, with deployment location and time less influential. By comparison, polyamide 6 and polyethylene terephthalate were comparatively inert with minimal change in response to artificial weathering or deployment time. Non-target analysis revealed extensive differentiation between non-aged and aged polyethylene after deployment, concordant with the targeted analysis. These observations highlight the need to consider the impact of leaching and weathering on plastic composition when quantifying the potential impact and risk of plastic pollution within receiving environments.

Plastic ingestion by three species of Scylla (Brachyura) from the coastal areas of Thailand

This study marked the first investigation into the presence of plastic particles in the stomachs of three mud crab species (Scylla olivacea, S. paramamosain and S. tranquebarica) collected across the Andaman Sea and the Gulf of Thailand. The highest number of plastic particles in the stomach of crab samples was polyethylene (PE) that contributed 88.5 %; while green was the predominant colour (60.3 %). Ingested particles recovered from the stomachs of crabs differed significantly between species and sites (p < 0.001). The average number of plastic particles per individual was 2.3 ± 8.6 in Scylla olivacea, 7.2 ± 16.9 in S. paramamosain, and 13.5 ± 48.9 in S. tranquebarica. Satun, revealed the highest number of plastic particles recovered from mud crabs, while the lowest number of plastic particles were from Pattani. To conclude, species of crab and site of collection plays a crucial factor in the propensity of plastic particles ingested by the genus Scylla mud crabs.

Research progress on occurrence characteristics and source analysis of microfibers in the marine environment

Synthetic microfiber pollution is a growing concern in the marine environment. However, critical issues associated with microfiber origins in marine environments have not been resolved. Herein, the potential sources of marine microfibers are systematically reviewed. The obtained results indicate that surface runoffs are primary contributors that transport land-based microfibers to oceans, and the breakdown of larger fiber plastic waste due to weathering processes is also a notable secondary source of marine microfibers. Additionally, there are three main approaches for marine microplastic source apportionment, namely, anthropogenic source classification, statistical analysis, and numerical simulations based on the Lagrangian particle tracking method. These methods establish the connections between characteristics, transport pathways and sources of microplastics, which provides new insights to further conduct microfiber source apportionment. This study helps to better understand sources analysis and transport pathways of microfibers into oceans and presents a scientific basis to further control microfiber pollution in marine environments.

The path of microplastics through the rare biodiversity estuary region of the northern Bay of Bengal

Due to its harmful effects on ecosystems and human health, microplastic (MP) pollution has become a significant environmental problem on a global scale. Although MPs' pollution path and toxic effects on marine habitats have been examined worldwide, the studies are limited to the rare biodiversity estuary region of Hatiya Island from the northern Bay of Bengal. This study aimed to investigate the MP pollution path and its influencing factors in estuarine sediments and water in rare biodiversity Hatiya Island in the northern Bay of Bengal. Sixty water and sediment samples were collected from 10 sampling sites on the Island and analyzed for MPs. The abundance of MPs in sediment ranged from 67 to 143 pieces/kg, while the abundance in water ranged from 24.34 to 59 pieces/m3. The average concentrations of MPs in sediment and water were 110.90 ± 20.62 pieces/kg and 38.77 ± 10.09 pieces/m3, respectively. Most identified MPs from sediment samples were transparent (51%), while about 54.1% of the identified MPs from water samples were colored. The fragment was the most common form of MP in both compartments, with a value of 64.6% in sediment samples and 60.6% in water samples. In sediment and water samples, almost 74% and 80% of MP were <0.5 mm, respectively. Polypropylene (PP) was the most abundant polymer type, accounting for 51% of all identified polymers. The contamination factor, pollution load index, polymer risk score, and pollution risk score values indicated that the study area was moderately polluted with MPs. The spatial distribution patterns and hotspots of MPs echoed profound human pathways. Based on the results, sustainable management strategies and intervention measures were proposed to reduce the pollution level in the ecologically diverse area. This study provides important insights into evaluating estuary ecosystem susceptibility and mitigation policies against persistent MP issues.

Toxic effects of environmental-relevant exposure to polyethylene terephthalate (PET) micro and nanoparticles in zebrafish early development

Polyethylene terephthalate (PET) is a commonly used thermoplastic in industry due to its excellent malleability and thermal stability, making it extensively employed in packaging manufacturing. Inadequate disposal of PET packaging in the environment and natural physical-chemical processes leads to the formation of smaller particles known as PET micro and nanoplastics (MNPs). The reduced dimensions enhance particle bioavailability and, subsequently, their reactivity. This study involved chemical degradation of PET using trifluoroacetic acid to assess the impact of exposure to varying concentrations of PET MNPs (0.5, 1, 5, 10, and 20 mg/L) on morphological, functional, behavioral, and biochemical parameters during the early developmental stages of zebrafish (Danio rerio). Characterization of the degraded PET revealed the generated microplastics (MPs) ranged in size from 1305 to 2032 μm, and that the generated nanoplastics (NPs) ranged from 68.06 to 955 nm. These particles were then used for animal exposure. After a six-day exposure period, our findings indicate that PET MNPs can diminish spontaneous tail coiling (STC), elevate the heart rate, accumulate on the chorion surface, and reduce interocular distance. These results suggest that PET exposure induces primary toxic effects on zebrafish embryo-larval stage of development.