Applications of Luminex xMAP technology for rapid, high-throughput multiplexed nucleic acid detection

Evaluation of a multiplexed assay for six urinary proteins based on liquid microarray analysis technology

Proteinuria serves as a critical indicator in the progression of chronic kidney disease. The quantification of urinary protein is instrumental in diagnosing kidney disease and monitoring therapeutic efficacy. Nephelometry and turbidimetric immunoassay are predominantly employed for the quantitative detection of various urinary proteins. We developed a quantitative detection method for six proteins in urine utilizing the flow fluorescence luminescence method on the Luminex®200™ detection platform. This study aims to evaluate the clinical performance and accuracy of the method. The sensitivity, precision, recovery, linearity, and interference metrics for the method meet the needs of clinical applications. The correlation coefficient (r) between the results of the method and nephelometry immunoassay on SIEMENS BNII platform ranged from 0.9375 to 0.9847, indicating a strong linear relationship. The results of the Bland-Altman analysis indicated that the systematic bias between the two methods was minimal. Additionally, Passing-Bablok regression analysis, both including and excluding outliers, was conducted on the clinical trial data. The findings demonstrated consistency between the two methods, with the expected confidence interval of bias remaining within the allowable error limits, indicating no significant discrepancy. This urine six protein quantification method demonstrates satisfactory performance, meeting the standards necessary for medical diagnosis and clinical application.

Simultaneous detection of trace protein biomarkers from a single drop of blood using AI-enhanced smartphone-based digital microscopy

The detection of early-stage diseases is often impeded by the low concentrations of protein biomarkers, necessitating sophisticated and costly technologies. In response, we have developed an advanced cyber-physical system that integrates blood plasma separation, biomarker detection, and analysis on a single microfluidic platform. This novel system enables the simultaneous detection of Neuron-Specific Enolase (NSE) and Carcinoembryonic Antigen (CEA) with high specificity and accuracy. Functionalized carbon dots (CDs) are employed for fluorescence-based quantification due to their superior biocompatibility, photostability, and resistance to photobleaching. The emission properties are optimized at 460 nm (blue) and 580 nm (yellow), yielding robust quantum efficiencies. The precise synthesis of CDs ensures reproducible fluorescence response with minimal background interference. A portable, smartphone-based fluorescence microscope equipped with 1000X magnification and UV excitation facilitates high-resolution image acquisition, serving as a low-cost alternative to conventional microscopy. Artificial intelligence algorithms are integrated for automated image analysis, enabling accurate quantification of biomarker concentrations. The system demonstrates impressive detection limits of 0.4 ng/mL and 0.9 ng/mL for CEA and NSE, respectively. The entire assay workflow, from sample introduction to result generation, is completed in 10 min. This integrated, portable diagnostic platform offers a transformative solution for point-of-care biomarker detection, particularly in resource-constrained settings, with the potential to democratize early disease screening and significantly reduce healthcare burdens globally.

Comparison of EBOV GP IgG Antibody Reactivity: Results from Two Immunoassays in the Democratic Republic of the Congo

Ebola virus (EBOV) is a highly infectious pathogen, and its long-term consequences continue to be investigated. With its high fatality rate and potential for reinfection or latent infection, continued development of research tools is of utmost importance. Using a cohort (n = 503) of existing bio-banked specimens from the Democratic Republic of the Congo (DRC) two EBOV glycoprotein (GP) immunoglobulin G (IgG) antibody-detection assays were compared: the gold-standard Filovirus Animal Non-Clinical Group (FANG) and a Multiplex bead-based Immunoassay (MIA) with seven pan-filoviral targets. As not all immunoassays have been shown to detect a vaccine-induced immune response, and previous EBOV serosurveillance has been primarily conducted with singleplex technology, this MIA was assessed as an additional resource. Among the cohort, as sample seroreactivity increased, assay correlation increased (r2=0.80). Correlation was sustained among sub-populations of the cohort-in detecting natural immunity among survivors and vaccine-derived responses. Additionally, when results were binarized by seroreactivity, there was high correlation between the two assays (kappa=0.70) with 71 serodiscordant samples. These data indicate that the MIA is an apt alternative to the singleplex FANG assay in detecting relative seroreactivity and can be used as a potential tool for widespread pan-filovirus serosurveillance in the DRC and similar contexts.

Comprehensive normalization and binary classification methods for enhanced sensitivity and reproducibility in Luminex assay quantitation

The Luminex assay is a powerful tool for large-scale quantitation of antibody levels and cytokines, but its utility can be limited by issues of specificity, sensitivity, and reproducibility. The corrections for background fluorescence and machine drift are essential steps in the normalization process. However, traditional methods often oversimplify these steps, failing to account for the complexity of the data, leading to the introduction of error and decreasing the sensitivity and reproducibility of the analysis. Furthermore, conventional methods to determine cut-points in binary measures do not consider the true distribution of the data, leading to arbitrary cut-points that compromise the integrity of the analysis. Here, we present a novel approach to normalize Luminex data and split the normalized bimodal data. Our method uses orthogonal regression of the measured fluorescence of a negative control bead and a blank bead to correct for background fluorescence, enhancing accuracy by preventing overcorrection due to cross-reactivity. To account for machine drift, we use a generalized additive model (GAM) on the standard curves to calculate a plate correction, thus reducing error and improving reproducibility. To distinguish between positive and negative results in bimodal measures, we use a clustering analysis to accurately split the data based on distribution. Finally, we developed a web application to easily carry out the developed method. These methods collectively increase sensitivity, specificity, and reproducibility of Luminex assay data analysis by effectively addressing the limitations of current normalization techniques, correcting for background fluorescence and machine drift, and improving the specificity and accuracy in splitting bimodal data.

Luminex Multiplex Immunoassay for Proteomic Profiling of Cerebrospinal Fluid

The enzyme-linked immunosorbent assay (ELISA) is commonly used in research and diagnostics but has limitations, including its single-substance detection and large sample volume requirements. In contrast, the Luminex technique, a bead-based sandwich immunoassay combined with flow cytometry, overcomes these limitations by simultaneous measurement of multiple analytes in small volumes. Using dyed micro-beads coated with monoclonal antibodies, this method can detect 100-500 immune markers in cerebrospinal fluid, capturing multiple targets from a single sample. This chapter discusses key pre-analytical factors like sample collection and preservation that influence detection outcomes, highlighting the Luminex technique's adaptability for measuring diverse biomarkers and its advantages in diagnostic applications, reducing variability, and optimizing resources.

A streamlined proximity extension assay using POEGMA polymer-coated magnetic beads for enhanced protein detection

The detection of protein biomarkers presenting at low concentrations in biological fluids is essential for disease diagnosis and therapeutic monitoring. While magnetic beads-based solid-phase immunoassays have shown promise in achieving high sensitivity for detecting low-abundance proteins, existing protocols suffer from limitations such as the cumbersome need for bead blocking and washing steps to minimize adsorption of non-specific biomolecules. These extra requirements lead to increased assay complexity and the risk of procedural errors. In this study, we present a streamlined magnetic proximity extension assay (MagPEA) using poly (oligo (ethylene glycol) methacrylate) (POEGMA)-coated beads. The polymer brush on bead surface, on the one hand, provides an effective mechanism for repelling non-specifically bound biomolecules that contribute to background signal generation without performing any bead blocking and washing steps. On the other hand, it facilitates the immobilization of capture antibodies on bead surface by simply embedding the antibodies onto the porous polymer under vacuum. Using the human inflammatory factor IL-8 as a demonstration, we show that the incorporation of POEGMA beads into MagPEA workflow significantly simplifies assay procedure while maintains high sensitivity.

Comprehensive phage display viral antibody profiling using VirScan: potential applications in chronic immune-mediated disease

Phage immunoprecipitation sequencing (PhIP-Seq) is a high-throughput platform that uses programmable phage display for serology. VirScan, a specific PhIP-Seq library encoding viral peptides from all known human viruses, enables comprehensive quantification of past viral exposures. We review its use in immune-mediated diseases (IMDs), highlighting its utility in identifying viral exposures in the context of IMD development. Finally, we evaluate its potential for precision medicine by integrating it with other large-scale omics data sets.

Microfluidic synthesis and accurate immobilization of low-density QD-encoded magnetic microbeads for multiplex immunoassay

Magnetic-fluorescent microbeads have been widely used in the multiplex detection of biological molecules. The traditional method relies on flow cytometry to decode and analyze the microbeads. Alternative strategies that employ immobilized microbeads on a plane and involve fluorescence imaging to analyze the microbeads have been proposed. Among these strategies, an integrated chip that controls magnetic field contribution using nickel powder pillars and captured microbeads has attracted great attention. Despite its unique advantages such as low manufacturing costs, reusability and high capture efficiency, existing research had been limited by the inability to precisely capture a single microbead, and the overlapping of microbeads has made multiplex immunoassays based on this strategy impossible. In this work, low-density microbeads were prepared in a microfluidic chip using IBOMA as the main monomer. The low density of the microbeads made the preparation of an aqueous suspension easier. An integration of nickel patterns, magnets and channels was carried out and demonstrated the capacity of capturing single microbeads precisely. Fluorescence coding further empowered this method with the ability of multiplex immunoassay, which was verified using three types of IgG, and a calibration curve for the detection of anti-human IgG was established using a sandwich immunoassay. These results show the promising potential of this strategy for biomedical detection.

The first report on detecting SARS-CoV-2 inside bacteria of the human gut microbiome: A case series on asymptomatic family members and a child with COVID-19

Many studies report the importance of using feces as source sample for detecting SARS-CoV-2 in patients with COVID-19 symptoms but who are negative to oropharyngeal/ nasopharyngeal tests. Here, we report the case of an asymptomatic child whose family members had negative results with the rapid antigen nasopharyngeal swab tests. The 21-month-old child presented with fever, diarrhea, bilateral conjunctivitis, and conspicuous lacrimation. In this study, analysis for the presence of SARS-CoV-2 in fecal samples by using Luminex technology allowed accurate detection of the presence of the viral RNA in the feces of the child and of all her relatives, which thus resulted to be positive but asymptomatic. It is the first time that SARS-CoV-2- is observed inside the bacteria of the human gut microbiome and outside a matrix resembling extracellular bacterial lysates, in agreement with a bacteriophage mechanism with the images obtained by transmission electron microscopy (TEM), post-embedding immunogold, and by fluorescence microscope. In addition to the typical observations of respiratory symptoms, accurate evaluation of clinical gastrointestinal and neurological symptoms, combined with efficient highly sensitive molecular testing on feces, represent an efficient approach for detecting SARS-CoV-2, and for providing the correct therapy in challenging COVID-19 cases, like the one here reported.

Development and validation of a multi-marker liquid bead array assay for the simultaneous detection of PIK3CA and ESR1 hotspot mutations in single circulating tumor cells (CTCs)

Background

PIK3CA and ESR1 mutations are associated with progression and therapy resistance in metastatic breast cancer (MBC). CTCs are highly heterogeneous and their analysis at single cell level can provide unique information for mutational profiling and the existence of different sub-clones related to tumor progression. We have developed a novel multi-marker liquid bead array assay based on combination of an enzymatic mutation enrichment method, multiplex PCR-based assay, and liquid bead array technology for the simultaneous detection of PIK3CA and ESR1 hotspot mutations in liquid biopsy samples. We focus on single CTCs, however the assay can be used for bulk CTC and ctDNA analysis.

Materials and methods

Single CTCs were isolated from an ER+/HER2+ MBC patient from CellSearch® cartridges using the VyCAP Puncher System and subjected to whole genome amplification followed by nuclease-assisted minor-allele enrichment with probe-overlap (NaME-PrO) enrichment. The assay was validated for analytical sensitivity and specificity for the simultaneous detection of PIK3CA (E545K, E542K, H1047R, H1047L) and ESR1 (Y537S, Y537C, Y537N, D538G, L536H) mutations in single CTCs, while its clinical performance was evaluated on 22 single CTCs and three single white blood cells (WBCs).

Results

The developed multi-marker liquid bead array assay is novel, highly specific and sensitive for both mutation panels. The assay can reliably detect mutation-allelic-frequencies (MAFs) as low as 0.1 %. The presence of PIK3CA and ESR1 mutations was detected in 13.6 % and 72.7 % of single CTCs, respectively. The developed assay is sample-saving since it requires only 2 μL of amplified DNA to check for nine hotspot PIK3CA and ESR1 mutations in a single cell. The developed liquid bead array assay (Luminex, US), based on a 96 microwell plate format, enables the simultaneous analysis of 96 single cells.

Conclusions

The developed novel multi-marker liquid bead array assay for the simultaneous detection of PIK3CA and ESR1 hotspot mutations in single CTCs is highly specific, highly sensitive, high-throughput, and sample-, cost-, and time-saving. This multi-marker liquid bead array assay can be extended to detect up to 100 mutations in many genes at once and can be applied for bulk CTC and ctDNA analysis.

Evaluating the Effects of BSA-Coated Gold Nanorods on Cell Migration Potential and Inflammatory Mediators in Human Dermal Fibroblasts

Albumin-coated gold nanoparticles display potential biomedical applications, including cancer research, infection treatment, and wound healing; however, elucidating their interaction with normal cells remains an area with limited exploration. In this study, gold nanorods (GNR) were prepared and coated with bovine serum albumin (BSA) to produce GNR-BSA. The functionalized nanoparticles were characterized based on their optical absorption spectra, morphology, surface charge, and quantity of attached protein. The interaction between GNR-BSA and BSA with normal cells was investigated using human dermal fibroblasts. The cytotoxicity test indicated cell viability between ~63-95% for GNR-BSA over concentrations from 30.0 to 0.47 μg/mL and ~85-98% for BSA over concentrations from 4.0 to 0.0625 mg/mL. The impact of the GNR-BSA and BSA on cell migration potential and wound healing was assessed using scratch assay, and the modulation of cytokine release was explored by quantifying a panel of cytokines using Multiplex technology. The results indicated that GNR-BSA, at 10 μg/mL, delayed the cell migration and wound healing 24 h post-treatment compared to the BSA or the control group with an average wound closure percentage of 6% and 16% at 6 and 24 h post-treatment, respectively. Multiplex analysis revealed that while GNR-BSA reduced the release of the pro-inflammatory marker IL-12 from the activated fibroblasts 24 h post-treatment, they significantly reduced the release of IL-8 (p < 0.001), and CCL2 (p < 0.01), which are crucial for the inflammation response, cell adhesion, proliferation, migration, and angiogenesis. Although GNR-BSA exhibited relatively high cell viability towards human dermal fibroblasts and promising therapeutic applications, toxicity aspects related to cell motility and migration must be considered.

Bead-based spontaneous Raman codes for multiplex immunoassay

In the immunoassay process, for fulfilling the need to identify multiple analytes in a small amount of complex sample matrix, it is desirable to develop highly efficient and specific multiplex suspension array technology. Raman coding strategy offers an attractive solution to code the suspension arrays by simply combing narrow spectral bands with stable signal intensities through solid-phase synthesis on the resin beads. Based on this strategy, we report the bead-based spontaneous Raman codes for multiplex immunoassay. The study resulted in superior selectivity of the Raman-encoded beads for binding with single and multiple analytes, respectively. With the use of mixed types of Raman-encoded immunoassay beads, multiple targets in small amounts of samples were identified rapidly and accurately. By confirming the feasibility of bead-based spontaneous Raman codes for multiplex immunoassay, we anticipate this novel technology to be widely applied in the near future.

HLA typing: A review of methodologies and clinical impact on haematopoietic cell transplantation

The importance of the HLA gene system in haematopoietic cell transplant outcomes was established early on and advances in both fields have led to ever increasing success of this clinical therapy. In large part, improvements in the understanding of HLA have been driven by the advancement in typing technologies. Each iteration of typing technology has improved the resolution of HLA typing, and often enabled the identification of polymorphism within the HLA loci. The discovery of the enormous amount of variation in the HLA genes, and the need to be able to characterise this for clinical HLA typing, has often resulted in a move away from one typing method to another more suited to typing of this complexity. Today, the gold standard for HLA typing are methods that can produce definitive HLA typing results.

Ultrasimple size encoded microfluidic chip for rapid simultaneous multiplex detection of DNA sequences

Simultaneous multiplexed analysis can provide comprehensive information for disease diagnosis. However, the current multiplex methods rely on sophisticated barcode technology, which hinders its wider application. In this study, an ultrasimple size encoding method is proposed for multiplex detection using a wedge-shaped microfluidic chip. Driving by negative pressure, microparticles are naturally arranged in distinct stripes based on their sizes within the chip. This size encoding method demonstrates a high level of precision, allowing for accuracy in distinguishing 3-5 sizes of microparticles with a remarkable accuracy rate of up to 99%, even the microparticles with a size difference as small as 0.5 μm. The entire size encoding process is completed in less than 5 min, making it ultrasimple, reliable, and easy to operate. To evaluate the function of this size encoding microfluidic chip, three commonly co-infectious viruses' nucleic acid sequences (including complementary DNA sequences of HIV and HCV, and DNA sequence of HBV) are employed for multiplex detection. Results indicate that all three DNA sequences can be sensitively detected without any cross-interference. This size-encoding microfluidic chip-based multiplex detection method is simple, rapid, and high-resolution, its successful application in serum samples renders it highly promising for potential clinical promotion.

Using Temporally and Spatially Resolved Measurements to Improve the Sensitivity of Fluorescence-Based Immunoassays

Detecting low concentrations of biomarkers is essential in clinical laboratories. To improve analytical sensitivity, especially in identifying fluorescently labeled molecules, typical optical detection systems, consisting of a photodetector or camera, utilize time-resolved measurements. Taking a different approach, magnetic modulation biosensing (MMB) is a novel technology that combines fluorescently labeled probes and magnetic particles to create a sandwich assay with the target molecules. By concentrating the target molecules and then using time-resolved measurements, MMB provides the rapid and highly sensitive detection of various biomarkers. Here, we propose a novel signal-processing algorithm that enhances the detection and estimation of target molecules at low concentrations. By incorporating both temporally and spatially resolved measurements using human interleukin-8 as a target molecule, we show that the new algorithm provides a 2-4-fold improvement in the limit of detection and an ~25% gain in quantitative resolution.

Single drop cytometry onboard the International Space Station

Real-time lab analysis is needed to support clinical decision making and research on human missions to the Moon and Mars. Powerful laboratory instruments, such as flow cytometers, are generally too cumbersome for spaceflight. Here, we show that scant test samples can be measured in microgravity, by a trained astronaut, using a miniature cytometry-based analyzer, the rHEALTH ONE, modified specifically for spaceflight. The base device addresses critical spaceflight requirements including minimal resource utilization and alignment-free optics for surviving rocket launch. To fully enable reduced gravity operation onboard the space station, we incorporated bubble-free fluidics, electromagnetic shielding, and gravity-independent sample introduction. We show microvolume flow cytometry from 10 μL sample drops, with data from five simultaneous channels using 10 μs bin intervals during each sample run, yielding an average of 72 million raw data points in approximately 2 min. We demonstrate the device measures each test sample repeatably, including correct identification of a sample that degraded in transit to the International Space Station. This approach can be utilized to further our understanding of spaceflight biology and provide immediate, actionable diagnostic information for management of astronaut health without the need for Earth-dependent analysis.

Who Is the Intermediate Host of RNA Viruses? A Study Focusing on SARS-CoV-2 and Poliovirus

The COVID-19 pandemic has sparked a surge in research on microbiology and virology, shedding light on overlooked aspects such as the infection of bacteria by RNA virions in the animal microbiome. Studies reveal a decrease in beneficial gut bacteria during COVID-19, indicating a significant interaction between SARS-CoV-2 and the human microbiome. However, determining the origins of the virus remains complex, with observed phenomena such as species jumps adding layers to the narrative. Prokaryotic cells play a crucial role in the disease's pathogenesis and transmission. Analyzing previous studies highlights intricate interactions from clinical manifestations to the use of the nitrogen isotope test. Drawing parallels with the history of the Poliovirus underscores the need to prioritize investigations into prokaryotic cells hosting RNA viruses.

Active Surveillance of Powassan Virus in Massachusetts Ixodes scapularis Ticks, Comparing Detection Using a New Triplex Real-Time PCR Assay with a Luminex Vector-Borne Panel

Powassan virus is an emerging tick-borne pathogen capable of causing severe neuroinvasive disease. As the incidence of human Powassan virus grows both in magnitude and geographical range, the development of sensitive detection methods for diagnostics and surveillance is critical. In this study, a Taqman-based triplex real-time PCR assay was developed for the simultaneous and quantitative detection of Powassan virus and Powassan virus lineage II (deer tick virus) in Ixodes scapularis ticks. An exon-exon junction internal control was built-in to allow for accurate detection of RNA quality and the failure of RNA extraction. The newly developed assay was also applied to survey deer tick virus in tick populations at 13 sites on Cape Cod and Martha's Vineyard Island in Massachusetts. The assay's performance was compared with the Luminex xMAP MultiFLEX Vector-borne Panel 2. The results suggested that the real-time PCR method was more sensitive. Powassan virus infection rates among ticks collected from these highly endemic tick areas ranged from 0.0 to 10.4%, highlighting the fine-scale geographic variations in deer tick virus presence in this region. Looking forward, our PCR assay could be adopted in other Powassan virus surveillance systems.

Nanoparticle-Based Bioaffinity Assays: From the Research Laboratory to the Market

Advances in the development of new biorecognition elements, nanoparticle-based labels as well as instrumentation have inspired the design of new bioaffinity assays. This review critically discusses the potential of nanoparticles to replace current enzymatic or molecular labels in immunoassays and other bioaffinity assays. Successful implementations of nanoparticles in commercial assays and the need for rapid tests incorporating nanoparticles in different roles such as capture support, signal generation elements, and signal amplification systems are highlighted. The limited number of nanoparticles applied in current commercial assays can be explained by challenges associated with the analysis of real samples (e.g., blood, urine, or nasal swabs) that are difficult to resolve, particularly if the same performance can be achieved more easily by conventional labels. Lateral flow assays that are based on the visual detection of the red-colored line formed by colloidal gold are a notable exception, exemplified by SARS-CoV-2 rapid antigen tests that have moved from initial laboratory testing to widespread market adaption in less than two years.

Approaches to produce and characterize recombinant protein VP1-2A of HAV for serological rapid test application

Studies reporting the expression of hepatitis A virus (HAV) structural proteins, specifically recombinant VP1-2A containing an immunogenic activity, use the Escherichia coli system. Recombinant HAV proteins may represent a source of less expensive antigens for application in different diagnostic platforms. However, the formation of insoluble aggregates is an obstacle to obtaining large amounts of HAV proteins in their native form. To overcome this obstacle, some approaches were applied in this study to improve purification, solubility, and protein expression levels. Critical properties were evaluated. The introduction of another insertion codon to increase the protein concentration and vector activity was observed and verified by SDS-PAGE. The expression was established with 0.4 mM IPTG for 4 h at 37 °C. The VP1 protein was partially soluble at an isoeletric point (pI) of 6.45. The majority of HAV VP1-2A proteins measured 45.19 kDa in size and had a homogeneity of 53.58%. Multi-antigen print immunoassay (MAPIA) showed antigenicity at different HAV VP1-2A concentrations, and microsphere-based immunoassays showed a specificity of 100% and a sensitivity of 84%. HAV VP1-2A was characterized using different sensitivity methods to prove its biological activity, indicating its use as a tool for the diagnosis of Hepatitis A virus infection.

Developing magnetic barcode bead fluorescence assay for high throughput analyzing humoral responses against multiple SARS-CoV-2 variants

The continuous mutation of SARS-CoV-2 highlights the need for rapid, cost-effective, and high-throughput detection methods. To better analyze the antibody levels against SARS-CoV-2 and its variants in vaccinated or infected subjects, we developed a multiplex detection named Barcode Bead Fluorescence (BBF) assay. These barcode beads were magnetic, characterized by 2-dimensional edges, highly multiplexed, and could be decrypted with visible light. We conjugated 12 magnetic barcode beads with corresponding nine spike proteins (wild-type, alpha, beta, gamma, delta, and current omicrons), two nucleocapsid proteins (wild-type and omicron), and one negative control. First, the conjugated beads underwent serial quality controls via fluorescence labeling, e.g., reproducibility (R square = 0.99) and detection limits (119 pg via anti-spike antibody). Next, we investigated serums from vaccinated subjects and COVID-19 patients for clinical applications. A significant reduction of antibody levels against all variant beads was observed in both vaccinated and COVID-19 studies. Subjects with two doses of mRNA-1273 exhibited the highest level of antibodies against all spike variants compared to two doses of AZD1222 and unvaccinated. We also found that COVID-19 patients showed higher antibody levels against spike beads from wild-type, alpha, beta, and delta. Finally, the nucleocapsid beads served as markers to distinguish infections from vaccinated subjects. Overall, this study developed the BBF assay for analyzing humoral immune responses, which has the advantages of robustness, automation, scalability, and cost-effectiveness.

Nucleic acid sample preparation techniques for bead-based suspension arrays

Multiplexing in biological assays allows the simultaneous detection of multiple analytes in a single reaction, which reduces time, labor, and cost as compared to single reaction-based detection methods. Microsphere- or bead-based suspension array technologies, such as the Luminex® xMAP® system, offer high-throughput detection of nucleic acids through a variety of different assay chemistries. Common with most nucleic acid chemistries, for bead-based or other microarray technologies, is the need for efficient extraction and purification of the nucleic acids from the specimen of interest. Often, the optimal method will be dictated by the requirements of the up-front enzymatic chemistry, such as PCR, primer extension, branched DNA (bDNA), etc. For bead-based microarray platforms, the user must also be cognizant of proteins and other contaminants present in reactions that require heat denaturation, as that can lead to bead aggregation or agglutination, preventing the reading of assay results. This review describes and highlights some of the nucleic acid extraction and purification methods that have been used successfully for bead-based nucleic acid analysis, for both prokaryotic and eucaryotic nucleic acids, from a variety of sample types.

Acute iv CRH administration significantly increases serum active ghrelin in postmenopausal PCOS women compared to postmenopausal controls

PURPOSE

In women with Polycystic Ovarian Syndrome (PCOS), an increased risk of disordered eating has been described. There is growing interest regarding a possible interconnection between psychological states and increased appetite in women with PCOS. Acute stress is characterized by increased Corticotropin Releasing Hormone (CRH) secretion. The aim was to estimate the ghrelin concentrations during CRH test.

METHODS

Twenty postmenopausal women with PCOS and twenty age- and BMI- matched postmenopausal control women were recruited at Aretaieion University Hospital. In the morning (9 am) all subjects had anthropometric measurements (weight, height, waist circumference) and a fasting sample for hormonal measurements. An intravenous (iv) CRH stimulation test conducted over 1 min. Serum active ghrelin levels were measured at 0, 15, 30, 60, 90, 120 min after iv CRH administration.

RESULTS

The postmenopausal PCOS group had a higher waist circumference compared to postmenopausal controls. Active ghrelin concentrations increased significantly from 0 to 15 min, to 30 min, to 60 min, to 90 min and then decreased to 120 min. However, within the postmenopausal control group there were no significant changes in serum active ghrelin levels. Serum active ghrelin concentrations were significantly greater in the postmenopausal control group at 0, 15 and 120 min compared to the postmenopausal PCOS group. At 90 min active ghrelin concentrations were significantly greater in the postmenopausal PCOS group. Delta Area Under the Curve of active ghrelin (ΔAUCghr) was significantly greater in the postmenopausal PCOS group compared to controls.

CONCLUSIONS

In postmenopausal PCOS, but not in postmenopausal controls, iv CRH administration induces increased serum active ghrelin secretion, suggesting a possible anti-stress adaptive mechanism. An increase in serum active ghrelin may induce hunger as a side-effect of this presumed adaptive mechanism.

Microcavity- and Microlaser-Based Optical Barcoding: A Review of Encoding Techniques and Applications

Optical microbarcodes have recently received a great deal of interest because of their suitability for a wide range of applications, such as multiplexed assays, cell tagging and tracking, anticounterfeiting, and product labeling. Spectral barcodes are especially promising because they are robust and have a simple readout. In addition, microcavity- and microlaser-based barcodes have very narrow spectra and therefore have the potential to generate millions of unique barcodes. This review begins with a discussion of the different types of barcodes and then focuses specifically on microcavity-based barcodes. While almost any kind of optical microcavity can be used for barcoding, currently whispering-gallery microcavities (in the form of spheres and disks), nanowire lasers, Fabry-Pérot lasers, random lasers, and distributed feedback lasers are the most frequently employed for this purpose. In microcavity-based barcodes, the information is encoded in various ways in the properties of the emitted light, most frequently in the spectrum. The barcode is dependent on the properties of the microcavity, such as the size, shape, and the gain materials. Various applications of these barcodes, including cell tracking, anticounterfeiting, and product labeling are described. Finally, the future prospects for microcavity- and microlaser-based barcodes are discussed.

Current and emerging trends in techniques for plant pathogen detection

Plant pathogenic microorganisms cause substantial yield losses in several economically important crops, resulting in economic and social adversity. The spread of such plant pathogens and the emergence of new diseases is facilitated by human practices such as monoculture farming and global trade. Therefore, the early detection and identification of pathogens is of utmost importance to reduce the associated agricultural losses. In this review, techniques that are currently available to detect plant pathogens are discussed, including culture-based, PCR-based, sequencing-based, and immunology-based techniques. Their working principles are explained, followed by an overview of the main advantages and disadvantages, and examples of their use in plant pathogen detection. In addition to the more conventional and commonly used techniques, we also point to some recent evolutions in the field of plant pathogen detection. The potential use of point-of-care devices, including biosensors, have gained in popularity. These devices can provide fast analysis, are easy to use, and most importantly can be used for on-site diagnosis, allowing the farmers to take rapid disease management decisions.

Conventional and State-of-the-Art Detection Methods of Bovine Spongiform Encephalopathy (BSE)

Bovine spongiform encephalopathy (BSE) is a fatal neurodegenerative disease that belongs to a group of diseases known as transmissible spongiform encephalopathies (TSEs). It is believed that the infectious agent responsible for prion diseases is abnormally folded prion protein (PrP^Sc), which derives from a normal cellular protein (PrP^C), which is a cell surface glycoprotein predominantly expressed in neurons. There are three different types of BSE, the classical BSE (C-type) strain and two atypical strains (H-type and L-type). BSE is primarily a disease of cattle; however, sheep and goats also can be infected with BSE strains and develop a disease clinically and pathogenically indistinguishable from scrapie. Therefore, TSE cases in cattle and small ruminants require discriminatory testing to determine whether the TSE is BSE or scrapie and to discriminate classical BSE from the atypical H- or L-type strains. Many methods have been developed for the detection of BSE and have been reported in numerous studies. Detection of BSE is mainly based on the identification of characteristic lesions or detection of the PrP^Sc in the brain, often by use of their partial proteinase K resistance properties. The objective of this paper was to summarize the currently available methods, highlight their diagnostic performance, and emphasize the advantages and drawbacks of the application of individual tests.

Human Papillomavirus E7 and p16INK4a mRNA Multiplexed Quantification by a QuantiGeneTM Proof-of-Concept Assay Sensitively Detects Infection and Cervical Dysplasia Severity

Background: Persistent infection with human papillomavirus (HPV) can lead to cervical cancer (CxCa). During the progression to CxCa, the expression of HPV oncogenes E6 and E7 is upregulated. In turn, cellular proteins such as p16INK4a are also modulated. The combined detection of HPV oncogenes and cellular biomarkers indicative for dysplasia could be informative and convey better specificity than the current HPV tests that cannot discriminate transient infection from dysplastic changes. Methods: The QuantiGeneTM 2.0 Plex Assay platform was chosen for the effective multiplexing and quantitative detection of seven HPV-E7 mRNA targets (HPV6, 16, 18, 31, 45, 59, and 68) and the cellular mRNA of p16INK4a as a biomarker for HPV-induced transformation. Actin-beta (ACTB) and hypoxanthine-guanine phosphoribosyltransferase 1 (HPRT1) were included as reference markers. Sequences for the specific capture and detector probes were customized and developed by ThermoFisher and formulated as a QuantiGene proof-of-concept (QG-POC) plex-set. The crude lysates of the HPV-positive cervical cancer cell lines CaSki (HPV16), HeLa (HPV18), MRHI-215 (HPV45), Erin59 (HPV59), ME180 (HPV68), and the HPV-negative cell line C33A, as well as liquid-based cytology smear samples (n = 441) were analyzed. The study was a proof-of-concept evaluating the feasibility of the platform. Logistic regression and receiver operating characteristic (ROC) analyses were performed to test for the sensitivity and specificity of HPV detection and dysplastic stage discrimination. Results: A QG-POC assay specifically and sensitively detects the HPV-E7 mRNA of seven different genotypes with an assay linearity between 20 and 13,000 cells. Cellular mRNA was detected from the crude lysates of cell lines and of cellular material from clinical liquid-based cytology smear samples. By combining HPV-E7 and p16INK4a expression normalized to ACTB, high-grade dysplasia (HCIN) and invasive cervical cancer (CxCa) were detectable, discriminable, and correlated to the biomarker expression strength. The ROC analysis from the multivariate logistic regression model including HPV-E7 and p16 INK4a resulted in an AUC of 0.74, at the optimal cut-off (sensitivity: 70.4%; specificity: 66.0%) for HCIN detection. CxCa was detected with an AUC of 0.77 (sensitivity: 81.8%, specificity: 77.4%). Conclusions: The QG-POC assay is sufficiently sensitive to detect and quantify HPV-E7 and cellular mRNA species. Multiplexing allows the specific detection of at least 10 analytes in a single reaction. Determining the abundance of E7 and p16INK4a transcripts when normalized to ACTB is informative about the presence of cervical dysplasia and potentially discriminates between low-grade and high-grade dysplasia and invasive cervical cancer. Further studies including more HPV genotypes and biomarkers are warranted.

Encoding microcarriers for biomedicine

High throughput biological analysis has become an important topic in modern biomedical research and clinical diagnosis. The flow encoding scheme based on the encoding microcarriers provides a feasible strategy for the multiplexed biological analysis. Different encoding characteristics invest the microcarriers with different encoding mechanisms. Biosensor analysis, drug screening, cell culture, and the construction and evaluation of bionic organ chips can be realized by decoding the microcarriers and quantifying the detection signal intensity. In this review, the encoding strategy of microcarriers was divided into the optical and non-optical encoding approaches according to their encoding elements, and the research progress of the microcarrier encoding strategy was elaborated. Finally, we summarized the biomedical applications and predicted their future prospects.

Advances in optical counting and imaging of micro/nano single-entity reactors for biomolecular analysis

Ultrasensitive detection of biomarkers is of paramount importance in various fields. Superior to the conventional ensemble measurement-based assays, single-entity assays, especially single-entity detection-based digital assays, not only can reach ultrahigh sensitivity, but also possess the potential to examine the heterogeneities among the individual target molecules within a population. In this review, we summarized the current biomolecular analysis methods that based on optical counting and imaging of the micro/nano-sized single entities that act as the individual reactors (e.g., micro-/nanoparticles, microemulsions, and microwells). We categorize the corresponding techniques as analog and digital single-entity assays and provide detailed information such as the design principles, the analytical performance, and their implementation in biomarker analysis in this work. We have also set critical comments on each technique from these aspects. At last, we reflect on the advantages and limitations of the optical single-entity counting and imaging methods for biomolecular assay and highlight future opportunities in this field.

Evaluation Study of xMAP TIER Assay on a Microsphere-Based Platform for Detecting First-Line Anti-Tuberculosis Drug Resistance

Early diagnosis of drug susceptibility for tuberculosis (TB) patients could guide the timely initiation of effective treatment. We evaluated a novel multiplex xMAP TIER (Tuberculosis-Isoniazid-Ethambutol-Rifampicin) assay based on the Luminex xMAP system to detect first-line anti-tuberculous drug resistance. Deoxyribonucleic acid samples from 353 Mycobacterium tuberculosis clinical isolates were amplified by multiplex polymerase chain reaction, followed by hybridization and analysis through the xMAP system. Compared with the broth microdilution method, the sensitivity and specificity of the xMAP TIER assay for detecting resistance was 94.9% (95%CI, 90.0-99.8%) and 98.9% (95%CI, 97.7-100.0%) for rifampicin; 89.1% (95%CI, 83.9-94.3%) and 100.0% (95%CI, 100.0-100.0%) for isoniazid; 82.1% (95% CI, 68.0-96.3%) and 99.7% (95% CI, 99.0-100.0%) for ethambutol. With DNA sequencing as the reference standard, the sensitivity and specificity of xMAP TIER for detecting resistance were 95.0% (95% CI, 90.2-99.8%) and 99.6% (95% CI, 98.9-100.0%) for rifampicin; 96.9% (95% CI, 93.8-99.9%) and 100.0% (95% CI, 100.0-100.0%) for isoniazid; 86.1% (95% CI, 74.8-97.4%) and 100.0% (95% CI, 100.0-100.0%) for ethambutol. The results achieved showed that the xMAP TIER assay had good performance for detecting first-line anti-tuberculosis drug resistance, and it has the potential to diagnose drug-resistant tuberculosis more accurately due to the addition of more optimal design primers and probes on open architecture xMAP system.

Multiplex Assay for Rapid Detection and Analysis of Nucleic Acid Using Barcode Receptor Encoded Particle (BREP)

Several multiplex nucleic acid assay platforms have been developed in response to the increasing importance of nucleic acid analysis, but these assays should be optimized as per the requirements of point-of-care for clinical diagnosis. To achieve rapid and accurate detection, involving a simple procedure, we propose a new concept in the field of nucleic acid multiplex assay platforms using hydrogel microparticles, called barcode receptor-encoded particles (BREPs). The BREP assay detects multiple targets in a single reaction with a single fluorophore by analyzing graphically encoded hydrogel particles. By introducing sets of artificially synthesized barcode receptor and barcode probes, the BREP assay is easily applicable in multiplexing any genetic target; sets of barcode receptors and barcode probes should be designed delicately for universal application. The performance of the BREP assay was successfully verified in a multiplex assay for the identification of different malaria species with high sensitivity, wide dynamic range, fast detection time, and multiplexibility.

Microfluidic synthesis of Janus-structured QD-encoded magnetic microbeads for multiplex immunoassay

Uniform and monodisperse quantum dot (QD)-encoded magnetic microbeads with Janus structure were produced in a microfluidic device via photopolymerization. UV light through a microscope objective was used to solidify the microbeads which showed sharp interfaces and excellent magnetic responses. QDs with different emission peaks (450 nm for blue and 640 nm for red) were mixed at different ratios to provide three spectral codes. The QD-encoded microbeads can be distinguished by analyzing their fluorescent images in HSV color space. After hydrolysis of the anhydride group in alkaline solution, protein was immobilized on microbeads via activation of carboxyl groups using (1-ethyl-3(3-dimethylaminoprophyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS). A microhole array in polydimethylsiloxane (PDMS) substrates with a specific size was fabricated to trap individual microbeads in a single microhole. The combination of Janus-structured QD-encoded magnetic microbeads and microhole arrays facilitates both flexibility, binding kinetics, sensitivity for suspension assay, and fluorescence mapping analysis for conventional biochips, thus providing a novel platform for multiplex bioanalysis. The capability of this integration for multiplex immunoassays was verified using three kinds of IgG and their corresponding anti-IgG. A detection limit of 0.07 ng/mL was achieved for human IgG, indicating practical applications in various fields.

The preparation of novel AIE fluorescent microspheres by dispersion polymerization

An approach to prepare monodisperse polystyrene microspheres with aggregation-induced emission (AIE) characteristics has been developed which shows promising applications in fluorescence-encoding. The micron-sized, monodisperse polystyrene microspheres with AIE molecules were perfectly synthesized by two-stage dispersion polymerization. Fluorescent AIE monomer was synthesized by Suzuki reaction, confirmed by nuclear magnetic resonance (NMR). These AIE fluorogens (AIEgens) exhibited unique properties such as bright green emission in solid state and increased emission in tetrahydrofuran (THF) solution with the increase of water content. The influence of the AIE molecules concentration to microspheres synthesis was well investigated. The reaction conditions were optimized to obtain the functional polystyrene microspheres with a size distribution around 3%. The novel microspheres were characterized by scanning electron microscopy (SEM), confocal fluorescence microscope and flow cytometry. According to these results, two-stage dispersion polymerization was proved to be an efficient pathway for the preparation of AIE fluorescent and functionalized microspheres, which could be used in many biomedical industries.

Point-of-Care Tests for HIV Drug Resistance Monitoring: Advances and Potentials

HIV/AIDS is a global public health crisis that is yet to be contained. Effective management of HIV drug resistance (HIVDR) supported by close resistance monitoring is essential in achieving the WHO 95-95-95 targets, aiming to end the AIDS epidemic by 2030. Point-of-care tests (POCT) enable decentralized HIVDR testing with a short turnaround time and minimal instrumental requirement, allowing timely initiation of effective antiretroviral therapy (ART) and regimen adjustment as needed. HIVDR POCT is of particular significance in an era when ART access is scaling up at a global level and enhanced HIVDR monitoring is urgently needed, especially for low-to-middle-income countries. This article provides an overview of the currently available technologies that have been applied or potentially used in HIVDR POCT. It may also benefit the continued research and development efforts toward more innovative HIVDR diagnostics.

Recent Advances in Rapid and Highly Sensitive Detection of Proteins and Specific DNA Sequences Using a Magnetic Modulation Biosensing System

In early disease stages, biomolecules of interest exist in very low concentrations, presenting a significant challenge for analytical devices and methods. Here, we provide a comprehensive overview of an innovative optical biosensing technology, termed magnetic modulation biosensing (MMB), its biomedical applications, and its ongoing development. In MMB, magnetic beads are attached to fluorescently labeled target molecules. A controlled magnetic force aggregates the magnetic beads and transports them in and out of an excitation laser beam, generating a periodic fluorescent signal that is detected and demodulated. MMB applications include rapid and highly sensitive detection of specific nucleic acid sequences, antibodies, proteins, and protein interactions. Compared with other established analytical methodologies, MMB provides improved sensitivity, shorter processing time, and simpler protocols.

Development of a bead-based assay for detection of three banana-infecting viruses

Background

Banana bunchy top virus (BBTV), cucumber mosaic virus (CMV) and banana streak virus (BSV) are important banana viruses, there are possible infections frequently with several viruses in field. Since the viruses are readily trasmitted in vegetative propagules, which pose a threat to banana production in banana-growing areas.

Methods

A multiplex polymerase chain reaction (PCR) protocol combined with LiquiChip analysis to identify BSV, BBTV, and CMV, with consistent amplification of plant ubiquitin (UBQ), the banana plant messenger RNA used as a procedural control. Multiplex reverse transcription (RT)-PCR amplicons were extended by allele-specific primers, followed by hybridization with carboxylated microspheres containing unique fluorescent oligonucleotides, which were detected using the LiquiChip 200 workstation.

Results

In this study, we aimed to develop a rapid, sensitive, and simultaneous detection method for BSV, BBTV, and CMV using a bead-based multiplex assay that can be applied in routine diagnosis. We demonstrated that this detection system was extremely efficient and highly specialized for differentiating individual in a mixture of viruses while being ten times more sensitive than traditional RT-PCR. The development of this method makes it feasible to detect banana viruses in field collected leaf samples.

A T-cell-dependent antibody response (TDAR) method in BALB/c mice based on a cytometric bead array

Most current methods to assess T-cell-dependent antibody responses (TDAR) are semi-quantitative and based on measures of antibody titer generated against a standard antigen like keyhole limpet hemocyanin (KLH). The precision, sensitivity, and convenience of TDAR assays might be improved by applying rapid, sensitive, specific cytometric bead assays (CBA). In the study here, KLH antigen was covalently coupled onto the surface of cytometric beads using immune microsphere technology, and IgM antibody capture spheres were prepared for use in pretreatment processing of samples. The working parameters associated with this novel TDAR-CBA system were optimized in orthogonal experiments. The optimal concentration of the KLH coating solution in this system was 160 μg/ml, that of the anti-KLH IgG capture spheres 6.0 × 10⁵/ml, and the optimal dilution of fluorescein isothiocyanate (FITC)-conjugated Affini-Pure Goat Anti-Mouse IgG (H + L) was 60 μg/ml. Repeated tests indicated that this approach yielded good linearity (r² = 0.9937) method, with a within-run precision of 3.1-4.9%, and a between-run precision of 4.4-4.9%. This new approach had a limit of detection of 113.43 ng/ml (linear range = 390.63-50 000), and an interference rate of just 0.04-3.51%. Based on these findings, it seems that a new mouse TDAR assay based on CBA can be developed that would appear to be more sensitive, accurate, and precise than the current TDAR assay approaches based on traditional ELISA.

Nanomaterial-assisted microfluidics for multiplex assays

Simultaneous detection of different biomarkers from a single specimen in a single test, allowing more rapid, efficient, and low-cost analysis, is of great significance for accurate diagnosis of disease and efficient monitoring of therapy. Recently, developments in microfabrication and nanotechnology have advanced the integration of nanomaterials in microfluidic devices toward multiplex assays of biomarkers, combining both the advantages of microfluidics and the unique properties of nanomaterials. In this review, we focus on the state of the art in multiplexed detection of biomarkers based on nanomaterial-assisted microfluidics. Following an overview of the typical microfluidic analytical techniques and the most commonly used nanomaterials for biochemistry analysis, we highlight in detail the nanomaterial-assisted microfluidic strategies for different biomarkers. These highly integrated platforms with minimum sample consumption, high sensitivity and specificity, low detection limit, enhanced signals, and reduced detection time have been extensively applied in various domains and show great potential in future point-of-care testing and clinical diagnostics.

Highly multiplex PCR assays by coupling the 5'-flap endonuclease activity of Taq DNA polymerase and molecular beacon reporters

We describe a highly multiplex PCR approach that can identify 10-fold more targets in current real-time PCR assays without additional enzymes or separate reactions. This single-step, single-tube, homogeneous detection approach, termed MeltArray, is achieved by coupling the 5′-flap endonuclease activity of the Taq DNA polymerase and multiple annealing sites of the molecular beacon reporters. The 5′-flap endonuclease cleaves a probe specifically into a “mediator” primer, and one molecular beacon reporter allows for the extension of multiple “mediator” primers to produce a series of fluorescent hybrids with different melting temperatures unique to each target. The overall number of targets detectable per reaction is equal to the number of the reporters multiplied by the number of mediator primers per reporter.

Real-time PCR is the most utilized nucleic acid testing tool in clinical settings. However, the number of targets detectable per reaction are restricted by current modes. Here, we describe a single-step, multiplex approach capable of detecting dozens of targets per reaction in a real-time PCR thermal cycler. The approach, termed MeltArray, utilizes the 5′-flap endonuclease activity of Taq DNA polymerase to cleave a mediator probe into a mediator primer that can bind to a molecular beacon reporter, which allows for the extension of multiple mediator primers to produce a series of fluorescent hybrids of different melting temperatures unique to each target. Using multiple molecular beacon reporters labeled with different fluorophores, the overall number of targets is equal to the number of the reporters multiplied by that of mediator primers per reporter. The use of MeltArray was explored in various scenarios, including in a 20-plex assay that detects human Y chromosome microdeletions, a 62-plex assay that determines Escherichia coli serovars, a 24-plex assay that simultaneously identifies and quantitates respiratory pathogens, and a minisequencing assay that identifies KRAS mutations, and all of these different assays were validated with clinical samples. MeltArray approach should find widespread use in clinical settings owing to its combined merits of multiplicity, versatility, simplicity, and accessibility.

Photoswitch-Based Fluorescence Encoding of Microspheres in a Limited Spectral Window for Multiplexed Detection

Fluorescence barcoding with multicolor fluorophores is limited by spectral crowding. Herein, we propose a fluorescence encoding method in a single-color channel with photoswitches. The photochromic naphthopyran was used to mediate the fluorescence of polystyrene microspheres through resonance energy transfer. The initial fluorescence intensity (F₀) and the fluorescence after UV light activation (F/F₀) were combined to generate hundreds of 2-dimensional barcodes. The coding capacity was further expanded with the different chemical kinetics of the photoswitches. The photoswitch-based fluorescence barcodes were applied to simultaneously and selectively detect the DNA sequences of COVID-19 (with related mutations) as a proof-of-concept for real applications. The compatibility with the state-of-the-art fluorescence microscopes and simple encoding and decoding make the method very attractive for multiplexed and high-throughput analyses.

COVID-19 diagnosis—myths and protocols

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) belonging to betacoronaviruses, on the basis of sequence analysis, mainly infects the lower respiratory tract in humans while symptoms remain milder than to those of severe acute respiratory syndrome and Middle East respiratory syndrome. The outbreak of coronavirus disease 2019 (COVID-19) has surprised the world with its rapid spread and potential virulence by compromising personal safety and economic perspectives. Its clinical diagnosis is mainly based on epidemiologic history, clinical manifestations, and auxiliary examinations including nucleic acid detection, computed tomographic scan, and immune identification technology. However, atypical signs and symptoms in patients and discrepancies in the identification techniques have also become the reason for the spread of the virus. Genetic mutations by the virus or sensitivity/specificity of diagnostic tests are becoming a major issue to report COVID-19. This chapter thus details the available diagnostic tests and their mechanisms and limitations, and finally, the approaches to identify COVID-19 with valid precision are discussed.

Sensing Methodology for the Rapid Monitoring of Biomolecules at Low Concentrations over Long Time Spans

Studies on the dynamics of biological systems and biotechnological processes require measurement techniques that can reveal time dependencies of concentrations of specific biomolecules, preferably with small time delays, short time intervals between subsequent measurements, and the possibility to record over long time spans. For low-concentration biomolecules, these requirements are very challenging since low-concentration assays are typically slow and require new reagents in every assay. Here, we present a sensing methodology that enables rapid monitoring of picomolar and sub-picomolar concentrations in a reversible affinity-based assay, studied using simulations. We demonstrate that low-concentration biomolecules can be monitored with small time delays, short time intervals, and in principle over an endless time span.

A Multiplexable Plasmonic Hairpin-DNA Sensor Based On Target-specific Tether Dynamics

The need for measurements of multiple biomarkers simultaneously at subnanomolar concentrations asks for the development of new sensors with high sensitivity, specificity, precision, and accuracy. Currently, multiplexed sensing in single molecule sensors increases the complexity of the system in terms of reagents and sample read-out. In this letter, we propose a novel approach to multiplex hairpin-based single-DNA molecule sensors, which overcomes the limitations of the present approaches for multiplexing. By target-dependent ssDNA hairpin design, we can create DNA tethers that have distinct tether dynamics upon target binding. Our numerical model shows that by changing the stem length of the ssDNA hairpin, significantly different dynamic tether behavior will be observed. By exploiting the distance-dependent coupling of AuNPs to gold films, we can probe this dynamic behavior along the z-axis using a simple laser equipped microscope.

Barcoded Asaia bacteria enable mosquito in vivo screens and identify novel systemic insecticides and inhibitors of malaria transmission

This work addresses the need for new chemical matter in product development for control of pest insects and vector-borne diseases. We present a barcoding strategy that enables phenotypic screens of blood-feeding insects against small molecules in microtiter plate-based arrays and apply this to discovery of novel systemic insecticides and compounds that block malaria parasite development in the mosquito vector. Encoding of the blood meals was achieved through recombinant DNA-tagged Asaia bacteria that successfully colonised Aedes and Anopheles mosquitoes. An arrayed screen of a collection of pesticides showed that chemical classes of avermectins, phenylpyrazoles, and neonicotinoids were enriched for compounds with systemic adulticide activity against Anopheles. Using a luminescent Plasmodium falciparum reporter strain, barcoded screens identified 48 drug-like transmission-blocking compounds from a 400-compound antimicrobial library. The approach significantly increases the throughput in phenotypic screening campaigns using adult insects and identifies novel candidate small molecules for disease control.

This study presents a barcoding strategy that enables high-throughput phenotypic screens of blood-feeding insects against small molecules in microtiter plate-based arrays and applies this to the discovery of novel systemic insecticides and compounds that block malaria parasite development in the mosquito vector.

A Listeria monocytogenes-Based Vaccine Formulation Reduces Vertical Transmission and Leads to Enhanced Pup Survival in a Pregnant Neosporosis Mouse Model

The apicomplexan parasite Neospora caninum is the worldwide leading cause of abortion and stillbirth in cattle. An attenuated mutant Listeria monocytogenes strain (Lm3Dx) was engineered by deleting the virulence genes actA, inlA, and inlB in order to avoid systemic infection and to target the vector to antigen-presenting cells (APCs). Insertion of sag1, coding for the major surface protein NcSAG1 of N. caninum, yielded the vaccine strain Lm3Dx_NcSAG1. The efficacy of Lm3Dx_NcSAG1 was assessed by inoculating 1 × 10⁵, 1 × 10⁶, or 1 × 10⁷ CFU of Lm3Dx_NcSAG1 into female BALB/c mice by intramuscular injection three times at two-week intervals, and subsequent challenge with 1 × 10⁵N. caninum tachyzoites of the highly virulent NcSpain-7 strain on day 7 of pregnancy. Dose-dependent protective effects were seen, with a postnatal offspring survival rate of 67% in the group treated with 1 × 10⁷ CFU of Lm3Dx_NcSAG1 compared to 5% survival in the non-vaccinated control group. At euthanasia (25 days post-partum), IgG antibody titers were significantly decreased in the groups receiving the two higher doses and cytokines recall responses in splenocyte culture supernatants (IFN-γ, IL-4, and IL-10) were increased in the vaccinated groups. Thus, Lm3Dx_NcSAG1 induces immune-protective effects associated with a balanced Th1/Th2 response in a pregnant neosporosis mouse model and should be further assessed in ruminant models.

Droplet microfluidic generation of a million optical microparticle barcodes

Micron-scale barcode particles enable labelling of small objects. Here, we demonstrate high-throughput barcode fabrication inside a microfluidic chip that can embed multiple, dye-doped high quality-factor whispering gallery mode cavities inside aqueous droplets at kilohertz rates. These droplets are then cured to form polyacrylamide hydrogel beads as small as 30 μm in diameter. Optical resonance spectra of the embedded cavities provide the hydrogels with unique barcodes with their diversity combinatorically scaled with the number of embedded cavities. Using 3 cavities per hydrogel, we obtain approximately one million uniquely identifiable, optically readable barcode microparticles.