Removal of natural organic matter in drinking water treatment by coagulation: A comprehensive review

A novel synthesis method of magnetic Janus particles for wastewater applications

HYPOTHESIS

Magnetic particles are widely used in many adsorption and removal processes. Among the many types of magnetic colloids, magnetic Janus particles offer significant possibilities for the effective removal of several components from aqueous solutions. Nevertheless, the synthesis of structures integrating different types of materials requires scalable fabrication processes to overcome the limitations of the available methodologies. Herein, we hypothesized a fabrication process for dual-surface functionalized magnetic Janus particles.

EXPERIMENTS

The primary silica particles with surface-attached amine groups are further asymmetrically modified by iron oxide nanoparticles, exploiting Pickering emulsion and electroless deposition techniques. The dual surface functionality of the particles is designed for its versatility and demonstrated in two wastewater-related applications.

FINDINGS

We show that our design can simultaneously remove chromium (VI) and phenol from aqueous solution. The fabricated magnetic-responsive Janus particles are also an effective adsorbent for genomic Deoxyribonucleic acid (DNA) and show superior performance to commercial magnetic beads. Thus, this study provides a novel platform for designing magnetic Janus particles with multifunctional surfaces for wastewater treatment applications.

Coagulation promotes the spread of antibiotic resistance genes in secondary effluents

Wastewater treatment plants (WWTPs) are biological hotspots receiving the residual antibiotics and antibiotic resistant bacteria/genes (ARB/ARGs) that greatly influence the spread of antibiotic resistance in the environment. A common method used in WWTPs for the purification of secondary effluent is coagulation. Notwithstanding the increasing health concern of antibiotic resistance in WWTPs, the impact of coagulation on the emergence and spread of antibiotic resistance remains unclear. To shed light on this, our study investigated the behavior of four representative ARB types (tetracycline, sulfamethoxazole, clindamycin, and ciprofloxacin resistance) during the coagulation process in a model wastewater treatment plant. Our search showed a significant reduction in the presence of ARBs after either PAC or FeCl3 coagulation, with removal efficiencies of 95% and 90%, respectively. However, after 4 days of storage, ARB levels in the coagulated effluent increased by 6-138 times higher than the original secondary effluent. It suggests a potential resurgence and spread of antibiotic resistance after coagulation. Detailed studies suggest that coagulants, particularly PAC, may facilitate the transfer of ARGs among different bacterial species by the enhanced cell-cell contact during coagulation-induced bacterial aggregation. This transfer is further enhanced by the factors such as auxiliary mixing, longer incubation time and ideal operating temperatures. In addition, both PAC and FeCl3 affected gene expression associated with bacterial conjugation, leading to an increase in conjugation efficiency. In conclusion, while coagulation serves as a purification method, it might inadvertently boost the spread of ARGs during tertiary wastewater treatment. This underscores the importance of implementing subsequent measures to mitigate this effect. Our findings provide a deeper understanding of the challenges posed by bacterial antibiotic resistance in wastewater and pave the way for devising more effective ARB and ARG management strategies.

Clusters of composition: Elemental content of aquatic organic matter in UK and Faroe peatlands

Water supply companies with reservoirs in peatland areas need to know how land use and vegetation cover in their supply catchments impact the amount and composition of aquatic organic matter in raw waters. Drinking water treatment processes remove organic matter from potable supplies, but recent increases in concentration and changes in composition have made this more difficult. This study analysed the composition of aquatic organic matter from peatland catchments in the UK and Faroe Islands. Both dissolved organic matter (DOM) and particulate organic matter (POM) compositions varied spatially, but these differences were not consistent as water moved through catchments, from headwaters and peatland pools to lake and reservoir outlets. These data showed that lakes and reservoirs are acting as flocculation hotspots, processing OM, releasing carbon (C), hydrogen (H) and oxygen (O) compounds to the atmosphere, and resulting in OM with higher N content. DOM compositions could be grouped into five clusters, showing that water treatment processes can be maximised to target 'envelopes' or clusters of DOM compositions. Catchment factors such as land use, vegetation cover, percentage peat cover and catchment area are good indicators of OM compositions likely to be present in a reservoir, and can guide water companies to maximise efficiency of their raw water treatment processes.

Enhancing the coagulation process for the removal of microplastics from water by anionic polyacrylamide and natural-based Moringaoleifera

The existence of microplastics (MPs) in water is a significant global concern since they have the potential to pose a threat to human health. Therefore, there is a need to develop a sustainable treatment technology for MPs removal, as the conventional methods are inadequate to address this problem. Coagulation is a typical process in treatment plants that can capture MPs before releasing them into the environment. In this work, the removal behaviors of polyamide (PA), polystyrene (PS), and polyethylene (PE) MPs were systematically investigated through coagulation processes using aluminum sulfate (Al2(SO4)3) and Moringa oleifera (MO) seeds extract. Subsequently, the coagulation performance of Al2(SO4)3 was improved by the separate addition of anionic polyacrylamide (APAM) and naturally derived MO. Results showed that Al2(SO4)3 in combination with APAM had better performance than Al2(SO4)3 or MO alone. In the Al2(SO4)3+APAM system, the removal efficiencies were 93.47%, 81.25%, and 29.48% for PA, PS, and PE MPs, respectively. Furthermore, the effectiveness of the Al2(SO4)3 and MO blended system was approximately similar to the Al2(SO4)3+APAM system. However, the required amount of Al2(SO4)3 was decreased to 50% in the Al2(SO4)3+MO system compared to the optimal dosage in the Al2(SO4)3 system alone. The combination of 40 mg/L of Al2(SO4)3 and 60 mg/L of MO resulted in removal efficiencies of 92.99%, 80.48%, and 28.94% for PA, PS, and PE MPs, respectively. The high efficacy of these enhanced methods was due to the synergic effects of charge neutralization and agglomeration adsorption, which were validated through zeta potential assessments and visual analysis using scanning electron microscopy (SEM) images. In the case of experimental conditions, initial pH had little impact on removal efficiency, while NaCl salinity and stirring speed directly affected MPs removal. Consequently, this research took a step toward finding a green strategy to remove MPs from water systems.

Unraveling the characteristics of dissolved organic matter removed by aluminum species based on FT-ICR MS analysis

Given the complexity of dissolved organic matter (DOM) and its interactions with coagulant chemicals, the mechanisms of DOM removal by aluminum (Al) coagulants remains a significant unknown. In this study, six test waters containing DOM with molecular weight (MW, <1 kDa, 1-10 kDa and >10 kDa) and hydrophobicity (hydrophilic, transphilic and hydrophobic) were prepared and coagulated with Al0, Al13 and Al30. The molecular-level characteristics of DOM molecules that were removed or resistant to removal by Al species were analyzed using Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). The results showed that at the molecular level, saturated and reduced tannins and lignin-like compounds containing abundant carboxyl groups exhibited higher coagulation efficiency. Unsaturated and oxidized lipids, protein-like, and carbohydrates compounds were relatively resistant to Al coagulation due to their higher polarity and lower content of carboxyl groups. Al13 removed molecules across a wider range of molecular weights than Al0 and Al30, thus the DOC removal efficiency of Al13 was the highest. This study furthers the understanding of interactions between Al species and DOM, and provides scientific insights on the operation of water treatment plants to improve control of DOM.

Recent advances in microplastic removal from drinking water by coagulation: Removal mechanisms and influencing factors

Microplastics (MPs) are emerging contaminants that are widely detected in drinking water and pose a potential risk to humans. Therefore, the MP removal from drinking water is a critical challenge. Recent studies have shown that MPs can be removed by coagulation. However, the coagulation removal of MPs from drinking water remains inadequately understood. Herein, the efficiency, mechanisms, and influencing factors of coagulation for removing MPs from drinking water are critically reviewed. First, the efficiency of MP removal by coagulation in drinking water treatment plants (DWTPs) and laboratories was comprehensively summarized, which indicated that coagulation plays an important role in MP removal from drinking water. The difference in removal effectiveness between the DWTPs and laboratory was mainly due to variations in treatment conditions and limitations of the detection techniques. Several dominant coagulation mechanisms for removing MPs and their research methods are thoroughly discussed. Charge neutralization is more relevant for small-sized MPs, whereas large-sized MPs are more dependent on adsorption bridging and sweeping. Furthermore, the factors influencing the efficiency of MP removal were jointly analyzed using meta-analysis and a random forest model. The meta-analysis was used to quantify the individual effects of each factor on coagulation removal efficiency by performing subgroup analysis. The random forest model quantified the relative importance of the influencing factors on removal efficiency, the results of which were ordered as follows: MPs shape > Coagulant type > Coagulant dosage > MPs concentration > MPs size > MPs type > pH. Finally, knowledge gaps and potential future directions are proposed. This review assists in the understanding of the coagulation removal of MPs, and provides novel insight into the challenges posed by MPs in drinking water.

Demonstrating scale-up of a novel water treatment process using super-bridging agents

Fiber-based materials have emerged as a promising option to increase the efficiency of water treatment plants while reducing their environmental impacts, notably by reducing the use of unsustainable chemicals and the size of the settling tank. Cellulose fiber-based super-bridging agents are sustainable, reusable, and versatile materials that considerably improve floc separation in conventional settling tanks or via alternative screening separation methods. In this study, the effectiveness of fiber-based materials for wastewater treatment was evaluated at lab-scale (0.25 L) and at pilot-scale (20 L) for two separation methods, namely settling and screening. For the fiber-based method, the performance of floc separation during settling was slightly affected by an 80x upscaling factor. A small decrease in turbidity removal from 93 and 86 % was observed for the jar and pilot tests, respectively. By contrast, the turbidity removal of the conventional treatment, i.e., no fibers with a settling separation, was largely affected by the upscaling with turbidity removals of 84 and 49 % for jar and pilot tests, respectively. Therefore, results are suggesting that fiber-based super-bridging agents could be implemented in full-scale water treatment plants. Moreover, the tested fibers increase the robustness of treatment by providing better floc removal than conventional treatment under several challenging conditions such as low settling time and screening with coarse screen mesh size. Furthermore, at both lab-scale and pilot-scale, the use of fiber-based materials reduced the demand for coagulant and flocculant, potentially lowering the operational costs of water treatment plants and reducing the accumulation of metal-based coagulants and synthetic polymers in sludge. Acute toxicity tests using the model organism Daphnia magna show that the cellulose fibers introduce insignificant toxicity at the optimized fiber concentration. Although dedicated mechanistic studies are required at various scales to understand in detail the influence of fibers on water treatment (coagulation/flocculation time, floc formation, floc size distribution velocity gradient, etc.), the efficacy and scalability of the fiber-based approach, along with its minimal environmental impact, position it as a viable and sustainable option for existing and future wastewater treatment plants.

Emerging organic contaminants in drinking water systems: Human intake, emerging health risks, and future research directions

Few earlier reviews on emerging organic contaminants (EOCs) in drinking water systems (DWS) focused on their detection, behaviour, removal and fate. Reviews on multiple exposure pathways, human intake estimates, and health risks including toxicokinetics, and toxicodynamics of EOCs in DWS are scarce. This review presents recent advances in human intake and health risks of EOCs in DWS. First, an overview of the evidence showing that DWS harbours a wide range of EOCs is presented. Multiple human exposure to EOCs occurs via ingestion of drinking water and beverages, inhalation and dermal pathways are discussed. A potential novel exposure may occur via the intravenous route in dialysis fluids. Analysis of global data on pharmaceutical pollution in rivers showed that the cumulative concentrations (μg L-1) of pharmaceuticals (mean ± standard error of the mean) were statistically more than two times significantly higher (p = 0.011) in South America (11.68 ± 5.29), Asia (9.97 ± 3.33), Africa (9.48 ± 2.81) and East Europe (8.09 ± 4.35) than in high-income regions (2.58 ± 0.48). Maximum cumulative concentrations of pharmaceuticals (μg L-1) decreased in the order; Asia (70.7) had the highest value followed by South America (68.8), Africa (51.3), East Europe (32.0) and high-income regions (17.1) had the least concentration. The corresponding human intake via ingestion of untreated river water was also significantly higher in low- and middle-income regions than in their high-income counterparts. For each region, the daily intake of pharmaceuticals was highest in infants, followed by children and then adults. A critique of the human health hazards, including toxicokinetics and toxicodynamics of EOCs is presented. Emerging health hazards of EOCs in DWS include; (1) long-term latent and intergenerational effects, (2) the interactive health effects of EOC mixtures, (3) the challenges of multifinality and equifinality, and (4) the Developmental Origins of Health and Disease hypothesis. Finally, research needs on human health hazards of EOCs in DWS are presented.

Microplastic contamination in wastewater: Sources, distribution, detection and remediation through physical and chemical-biological methods

Microplastics are tiny plastic particles smaller than 5 mm. that have been widely detected in the environment, including in wastewater. They originate from various sources including breakdown of larger plastic debris, release of plastic fibres from textiles, and microbeads commonly used in personal care products. In wastewater, microplastics can pass through the treatment process and enter the environment, causing harm to biodiversity by potentially entering the food chain. Additionally, microplastics can act as a vector for harmful pollutants, increasing their transport and distribution in the environment. To address this issue, there is a growing need for effective wastewater treatment methods that can effectively remove microplastics. Currently, several physical and chemical methods are available, including filtration, sedimentation, and chemical degradation. However, these methods are costly, low efficiency and generate secondary pollutants. Furthermore, lack of standardization in the measurement and reporting of microplastics in wastewater, makes it difficult to accurately assess microplastic impact on the environment. In order to effectively manage these issues, further research and development of effective and efficient methods for removing microplastics from wastewater, as well as standardization in measurement and reporting, are necessary to effectively manage these detrimental contaminants.

A review of the degradation of antibiotic contaminants using advanced oxidation processes: modification and application of layered double hydroxides based materials

In recent years, the treatment of organic pollutants has become a global concern due to the threat to human health posed by emerging contaminants, especially antibiotic contamination. Advanced oxidation processes (AOPs) can solve the organic pollution problem well, which have been identified as a promising solution for the treatment of hard-to-handle organic compounds including antibiotic contaminants. Layered double hydroxides (LDHs) are excellent catalysts because of their flexible tunability, favorable thermal stability, abundant active sites, and facile exchangeability of intercalated anions. This paper conducted a systematic review of LDHs-based materials used for common antibiotic removal by three significant AOP technologies, such as photocatalysis, the Fenton-like processes, and peroxymonosulfate catalysis. The degradation effects studied in various studies were reviewed, and the mechanisms were discussed in detail based on the type of AOPs. Finally, the challenges and the application trends of AOPs that may arise were prospected. The aim of this study is to suggest ways to provide practical guidance for the screening and improvement of LDH materials and the rational selection of AOPs to achieve efficient antibiotic degradation. This could lead to the development of more efficient and environmentally friendly materials and processes for degrading antibiotics, with significant implications for our ecological conservation by addressing water pollution.

Natural Disinfection-like Process Unveiled in Soil Microenvironments by Enzyme-Catalyzed Chlorination

Substantial natural chlorination processes are a growing concern in diverse terrestrial ecosystems, occurring through abiotic redox reactions or biological enzymatic reactions. Among these, exoenzymatically mediated chlorination is suggested to be an important pathway for producing organochlorines and converting chloride ions (Cl-) to reactive chlorine species (RCS) in the presence of reactive oxygen species like hydrogen peroxide (H2O2). However, the role of natural enzymatic chlorination in antibacterial activity occurring in soil microenvironments remains unexplored. Here, we conceptualized that heme-containing chloroperoxidase (CPO)-catalyzed chlorination functions as a naturally occurring disinfection process in soils. Combining antimicrobial experiments and microfluidic chip-based fluorescence imaging, we showed that the enzymatic chlorination process exhibited significantly enhanced antibacterial activity against Escherichia coli and Bacillus subtilis compared to H2O2. This enhancement was primarily attributed to in situ-formed RCS. Based on semiquantitative imaging of RCS distribution using a fluorescence probe, the effective distance of this antibacterial effect was estimated to be approximately 2 mm. Ultrahigh-resolution mass spectrometry analysis showed over 97% similarity between chlorine-containing formulas from CPO-catalyzed chlorination and abiotic chlorination (by sodium hypochlorite) of model dissolved organic matter, indicating a natural source of disinfection byproduct analogues. Our findings unveil a novel natural disinfection process in soils mediated by indigenous enzymes, which effectively links chlorine-carbon interactions and reactive species dynamics.

Colloidal Chemistry in Water Treatment: The Effect of Ca2+ on the Interaction between Humic Acid and Poly(diallyldimethylammonium chloride) (PDADMAC)

The complexation of humic acid (HA), as a major component of natural organic matter (NOM) in raw water, with polycations is a key step in the water treatment process. At sufficiently high addition of a polycation, it leads to neutralization of the formed complexes and precipitation. In this work, we studied the effect of the presence of Ca2+ ions on this process, with poly(diallyldimethylammonium chloride) (PDADMAC) as a polycation. This was done by determining the phase behavior and characterizing the structures in solution by light scattering and small-angle neutron scattering (SANS). We observe that with increasing Ca2+ concentration, the phase boundaries of the precipitation region shift to a lower PDADMAC concentration, which coincides well with a shift of the ζ-potential of the aggregates in solution. Light scattering shows the formation of aggregates of a 120-150 nm radius, and SANS shows that Ca2+ addition promotes a compaction in the size range of 10-50 nm within these aggregates. This agrees well with the observation of more densely packed precipitates by confocal microscopy in the presence of Ca2+. Following the precipitation kinetics by turbidimetry shows a marked speeding up of the process already in the presence of rather small Ca2+ concentrations of 1 mg/L. It can be stated that the presence of Ca2+ during the complexation process of HA with a polycation has a marked effect on phase behavior and precipitation kinetics of the formed aggregates. In general, the presence of Ca2+ facilitates the process largely already at rather low concentrations, and this appears to be linked to a compaction of the formed structures in the mesoscopic size range of about 10-50 nm. These findings should be of significant importance for tailoring the flocculation process in water treatment, which is a highly important process in delivering drinking water of sufficient quality to humans.

Efficient extraction performance and mechanisms of Cd2+ and Pb2+ in water by novel dicationic ionic liquids

Ten novel hydrophobic dicationic ionic liquids (DILs) were synthesized and applied for the extraction of heavy metals in aqueous solutions. Their physicochemical properties were measured at ambient temperature, and the leaching behaviors of the as-prepared DILs in water were assessed by TOC analysis. Metal extraction experiments were carried out to evaluate the extraction performances of the DILs. It was found that the extraction rates of up to 0.45 and 0.53 mg·(g·min)-1 were achieved with 100 mg DILs for 5 mL of 5 mg/L Cd2+ and Pb2+ solutions. Besides, the extraction efficiencies of Cd2+ and Pb2+ were respectively up to 95.48% and 98.46%, when the volumes of the simulated wastewater were expanded by a factor of 20 at a constant extraction phase ratio (1000 mg DILs for 50 mL of 5 mg/L Cd2+ or Pb2+ solutions). The reusability of the novel DILs was successfully proved by the back-extraction experiments with 0.5 M HNO3. Finally, taking Cd2+ extraction as an example, the extraction mechanism based on FTIR analysis and quantum chemical calculations showed that both S and O atoms in the anions of DILs had physical and quasi-chemical interactions with Cd2+, which were stronger than the electrostatic attraction.

Al and Mn speciation changes during the pre-oxidation with potassium permanganate and coagulation removing natural organic matter and its membrane fouling behavior

In this study, we systematically explore coagulation behavior, ultrafiltration membrane fouling behavior and the mechanism involved in during the process of pre-oxidation of potassium permanganate and coagulation of aluminum chloride at different condition to treat model pollutants (humic acid, HA) and natural water. The KMnO4 pre-oxidation significantly enhances flocs formation, and for HA artificial water the flocs size increases from 82 to 122 μm at pH 5.5, from 63 to 185 μm at pH 7.0 and from 0 to 75 μm at pH 8.5, respectively, as for natural water it increases from 72 to 139 μm. The enhanced coagulation at pH 5.5 is attributed to the increased polymeric Al speciation after pre-oxidation along with the generated Mn2+ damaging the electric double layer structure. And for pH 8.5 it is mainly caused by the in-situ MnO2 as combination nuclei during pre-oxidation. Besides, for pH 7.0, the combined effect of in-situ MnO2 and the increased polymeric Al speciation both contribute to improvement of the coagulation. What's more, the enhanced Al coagulation by pre-oxidation of KMnO4 also helps alleviate the membrane fouling for both HA artificial water and natural water, and a much rougher surface with larger flocs forms after KMnO4-aided Al coagulation filtration. This study provides an alternative perspective on the mechanism of pre-oxidation coagulation process.

Dissolved organic material changes during combined treatment of a mixture of landfill leachate and anaerobic digestate using deammonification and chemical coagulation

The current study investigates the combined treatment of wastewater of anaerobic digestate and landfill leachate, using deammonification and coagulation/flocculation processes. The deammonification section studies the performance of a full-scale deammonification plant in nitrogen and chemical oxygen demand (COD) removal, monitored over 2 years. For further COD reduction from the deammonification effluent (DE) to meet the environmental regulatory standards, coagulation/flocculation using three different Al-based coagulants was used to treat the DE. Results revealed that the deammonification plant showed 80% average ammonium removal from the mixed feed over the study period. Additionally, 30% of the feed COD was removed in the deammonification plant. COD analysis after treatment using coagulants revealed that the polyaluminum chloride modified with Fe had the best performance in reducing COD to meet the environmental standards. Excitation-emission matrix-parallel factor analysis (EEM-PARAFAC) of the dissolved organic material (DOM) samples indicated that fluorescents were the compounds mostly affected by the coagulant types. DOM analysis using 2D correlation Fourier-transform infrared spectroscopy revealed that the applied coagulants showed minor differences in removing different functional groups, despite having different COD reduction performance. Wastewater elemental analysis indicated elevated metal concentrations in low pH conditions (<6) due to re-stabilization of the flocs using coagulants.

Retrieval of suspended sediment concentration (SSC) in the Arabian Gulf water of arid region by Sentinel-2 data

Suspended sediment concentration (SSC) in water increases temperature and turbidity, limits the photosynthesis of aquatic plants, and reduces biologically available oxygen. It is important to study SSC in the coastal waters of the Arabian Gulf. Thus, this study mapped the SSC of coastal water between Al Arish and Al Ghariyah in northern Qatar using the spectral bands of the MultiSpectral Imager (MSI) of Sentinel-2 by calculating the Normalized Difference Suspended Sediment Index and Normalized Suspended Material Index. The results are studied using the Normalized Difference Turbidity Index and Modified Normalized Difference Water Index. The mapping of SSC in the water using NDSSI showed the presence of a high concentration of suspended sediments between Al Arish and Al Mafjar and a low concentration between Al Mafjar and Al Ghariyah. The mapping of NSMI showed values between 0.012 (clear water) and 0.430 (more suspended material) for the occurrence of suspended materials and supported the results of NDSSI. The study of turbidity using an NDTI image showed turbidity index values ranging from -0.44 (clear water) to 0.12 (high turbidity) and confirmed the occurrence and distribution of suspended sediments and materials in the water. The MNDWI image was able to discriminate clear water with bright pixels from silty sand and mud flats. The relationships between NDSSI, NSMI, and NDTI were correlated with in-situ measurements and studied to find suitable indices to map SSC. Regression analyses showed the strongest relationship between NSMI and NDTI (R2 = 0.95) next to NDSSI and NDTI, where NDTI had the strongest effect on NDSSI (R2 = 0.86). The satellite data results were evaluated by studying the physical parameters and spatial distribution of suspended sediments in the surface and bottom waters. In addition, the grain size distributions, mineral identification, and chemical element concentrations in the bottom sediment samples were studied.

Simultaneous modulation of CHO cell cytotoxicity, turbidity, and DOC by coagulation with or without pre-oxidation in water from the Pearl River Delta region, China

Coagulation with or without pre-oxidation are important drinking water treatment processes. However, the efficacy of these processes in mitigating water toxicity remains unknown. To further improve drinking water safety, we employed water from the Pearl River Delta region of southern China to investigate a treatment approach consisting of coagulation with or without pre-oxidation to simultaneously modulate health-relevant cytotoxicity to CHO cells, on top of the conventional foci of turbidity and dissolved organic carbon (DOC) during water treatment. Three coagulants (two aluminum-based and one iron-based salts) and three pre-oxidants (ozone, permanganate, and peroxymonosulfate) were studied. For coagulation without pre-oxidation, intermediate coagulant doses and pH reached optimum cytotoxicity to CHO cells, turbidity, and DOC control simultaneously. Introducing oxidants reduced cytotoxicity to CHO cells significantly, enhanced by increasing oxidant concentrations and pre-oxidation duration. The cytotoxicity to CHO cells mitigation capabilities of three pre-oxidants were: ozone > peroxymonosulfate > potassium permanganate. Modulation of water cytotoxicity to CHO cells was mostly attributable to controlling DOC (specifically humic-acid like substances, tyrosine, tryptophan). However, the addition of pre-oxidants led to significant shifts in water cytotoxicity to CHO cells forcing drivers, rendering humic-acid like substances the sole decisive cytotoxicity-inducing fluorophores. For the first time, 'sweet spots' were identified to simultaneously monitor cytotoxicity to CHO cells alongside turbidity and DOC. These methods better modulate water cytotoxicity to CHO cells without sacrificing conventional water treatment goals while shedding light onto the mechanisms behind.

Coagulative removal of microplastics from aqueous matrices: Recent progresses and future perspectives

Coagulation-flocculation-sedimentation (CFS) system has been identified as one of the favored treatment technique in water/wastewater treatment systems and hence, it is crucial to comprehend the efficacy of different coagulants used in removing microplastics (MPs) from aqueous matrices. Henceforth, this study critically reviews the recent progress and efficacy of different coagulants used to date for MPs removal. This includes laboratory and field-scale studies on inorganic and organic coagulants, as well as laboratory-scale studies on natural coagulants. Inorganic and organic coagulants have varying MPs removal efficiencies such as: Fe/Al-salts (30 %-95 %), alum (99 %), and poly aluminum chloride (13 %-97 %), magnesium hydroxide (84 %), polyamine (99 %), organosilanes (>95 %), and polyacrylamide (85 %-98 %). Moreover, studies have highlighted the use of natural coagulants, such as chitosan, protein amyloid fibrils, and starch has shown promising results in MPs removal with sevral advantages over traditional coagulants. These natural coagulants have demonstrated high MPs removal efficiencies with chitosan-tannic acid (95 %), protein amyloid fibrils (98 %), and starch (>90 %). Moreover, the MPs removal efficiencies of natural coagulants are compared and their predominant removal mechanisms are determined. Plant-based natural coagulants can potentially remove MPs through mechanisms such as polymer bridging and charge neutralization. Further, a systematic analysis on the effect of operational parameters highlights that the pH affects particle surface charge and coagulation efficiency, while mixing speed affects particle aggregation and sedimentation. Also, the optimal mixing speed for effective MPs removal depends on coagulant type and concentration, water composition, and MPs characteristics. Moreover, this work highlights the advantages and limitations of using different coagulants for MPs removal and discusses the challenges and future prospects in scaling up these laboratory studies for real-time applications.

Probabilistic human health risk assessment and Sobol sensitivity reveal the major health risk parameters of aluminum in drinking water in Shiraz, Iran

Overuse of aluminum salts (a.k.a., alum) in coagulation and flocculation processes in water treatment raises concerns about increased levels of aluminum (Al) in drinking water. In this study, we present a probabilistic human health risk assessment (HRA) for non-cancerogenic risks, with Sobol sensitivity analysis, to vet the concern of increased health risk from Al in drinking water in Shiraz, Iran, for children, adolescents, and adults. The results show that the concentration of Al in the drinking water in Shiraz varies significantly between winter and summer seasons and varies considerably spatially across the city irrespective of the season. However, all concentrations are below the guideline concentration. The HRA results show that the highest health risk is for children in summer, and the lowest is for adolescents and adults during winter, with generally higher health risks for younger age groups. However, Monte Carlo results for all age groups suggest no adverse health effects due to Al exposure. The sensitivity analysis shows that the sensitive parameters vary across age groups. For example, the Al concentration and ingestion rate pose the most risk for adolescent and adult groups, and children group, respectively. More importantly, the interaction of Al concentration with ingestion rate and body weight is the controlling parameters for evaluating HRA rather than Al concentration alone. We conclude that while the HRA of Al in Shiraz drinking water did not indicate significant health risk, regular monitoring and optimal operation of the coagulation and flocculation processes are essential.

Removal efficiencies of microplastics of the three largest drinking water treatment plants in Bangladesh

Drinking water treatment plants (DWTPs) are intended to provide safe water to the municipality, typically by treating surface waters from rivers, lakes, and streams. Regrettably, all of these water sources for DWTPs have been reported to be contaminated by microplastics (MPs). Hence, there is an urgent need to investigate the removal efficiencies of MPs from raw waters in the conventional DWTPs anticipating public health concerns. In this experiment, MPs in the raw and treated waters of the three major DWTPs of Bangladesh, having different water treatment processes, were evaluated. The concentrations of MPs in the inlet points of Saidabad Water Treatment Plant phase-1 and 2 (SWTP-1 and SWTP-2), which share a similar water source of the Shitalakshya River, were 25.7 ± 9.8 and 26.01 ± 9.8 items L-1. The third plant, Padma Water Treatment Plant (PWTP) utilizes water from the Padma River and had an initial MP concentration of 6.2 ± 1.6 items L-1. The studied DWTPs, with their existing treatment processes, were found to reduce the MP loads substantially. The final MP concentrations in treated waters of SWTP-1, SWTP-2, and PWTP were 0.3 ± 0.03, 0.4 ± 0.01, and 0.05 ± 0.02 items L-1 with the removal efficiencies of 98.8, 98.5, and 99.2 %, respectively. The considered size range of MP was 20 μm to <5000. Fragments and fibers were the two predominant MP shapes. In terms of polymer, the MPs were polypropylene (PP, 48 %), polyethylene (PE, 35 %), polyethylene terephthalate (PET, 11 %), and polystyrene (PS, 6 %). The field emission scanning electron microscopy-energy dispersive X-ray spectroscopy (FESEM-EDX) revealed the fractured and rough surfaces of the remaining MPs, which were also found to be contaminated with heavy metals, like lead (Pb), cadmium (Cd), chromium (Cr), arsenic (As), copper (Cu), and zinc (Zn). Hence, additional initiatives are required to remove the residual MPs from the treated waters to safeguard the city dwellers from potential hazards.

Microcosmic mechanism analysis of the combined pollution of aged polystyrene with humic acid and its efficient removal by a composite coagulant

The composite pollutants formed by aged polystyrene (APS) and natural organic matter are complex and harmful, which lead to the deterioration of water quality. In this work, the interaction mechanism between humic acid (HA) and APS was discussed by investigating the changes in their functional groups. Besides, a novel polyaluminum-titanium chloride composite coagulant (PATC) was prepared, and its binding behaviors with HA@APS under different pH conditions were analyzed from a microscopic perspective. It was found that at pH 4, π-π conjugation was the dominant interaction between HA and APS. And the main removal mechanism of HA@APS by PATC was surface complexation. With the increase of pH, π-π conjugation, n-π electron donor-acceptor interaction (EDA), and hydrogen bonding gradually dominated the interaction between APS and HA. At pH 7, PATC hydrolyzed to form various polynuclear Al-Ti species, which could meet the demand for different binding sites of HA@APS. Under alkaline conditions, HB and n-π EDA in HA@APS were weakened, while π-π conjugation held a dominant position again. At this time, the main coagulation mechanism of PATC changed from charge neutralization to sweeping action, accompanied by hydrogen bonding. ENVIRONMENTAL IMPLICATION: Microplastics (MPs) have attracted the public's attention due to their potential toxicity to humans. The combined pollution of aged microplastics and humic acid (HA) will bring great harm to aquatic environment. The development of novel composite coagulants is hopeful to efficiently remove MPs and their combined pollutants. Elucidating the interactions between HA and aged MPs is helpful to understand the transformation and fate of MPs in actual environments, and to reveal the removal mechanism of composite pollutants by coagulation. The findings presented here will provide theoretical guidance for addressing the challenges of coagulation technology in treating new pollutants in practice.

Understanding the influence of dissolved organic nitrogen characteristics on enhanced coagulation performance for water reuse

With the recent focus on using advanced water treatment processes for water reuse, interest is growing for utilizing enhanced coagulation to remove dissolved chemical species. Up to 85% of the nitrogen in wastewater effluent is made up of dissolved organic nitrogen (DON), but there is a knowledge gap regarding its removal during coagulation, which can be influenced by DON characteristics. To address this issue, tertiary-treated wastewater samples were analyzed before and after coagulation with polyaluminum chloride and ferric chloride. Samples were size-fractionated into four molecular weight fractions (0.45 μm, 0.1 μm, 10 kDa, and 3 kDa) using vacuum filtration and ultrafiltration. Each fraction was further evaluated by coagulating it separately to assess DON removal during enhanced coagulation. The size fractionated samples were also separated into hydrophilic and hydrophobic fractions using C18 solid phase extraction disks. Fluorescence excitation-emission matrices were used to investigate the characteristics of dissolved organic matter contributing to DON during the coagulation process. The results showed that DON compounds of size <3 kDa constituted a majority of the total DON. Coagulation removed more than 80% DON from size fractions 0.45 μm-0.1 μm and 0.1 μm-10 kDa, but less than 20% was removed from 10 kDa to 3 kDa and <3 kDa fractions. Coagulation on pre-filtered samples removed 19% and 25% of the <3 kDa DON fraction using polyaluminum chloride and ferric chloride, respectively. In all molecular weight fractions, hydrophilic DON compounds were found to be dominant (>90%), and enhanced coagulation was not effective in removing hydrophilic DON compounds. LMW fractions respond poorly to enhanced coagulation due to their hydrophilic nature. Enhanced coagulation effectively removes humic acid-like substances, but poorly removes proteinaceous compounds such as tyrosine and tryptophan. This study's findings provide insights into DON behavior during coagulation and factors affecting its removal, potentially improving wastewater treatment strategies.

Temporal and spatial variations of disinfection by-products in South Taihu's drinking water, Zhejiang Province, China

Some disinfection by-products (DBPs) in drinking water present a potential safety concern. This study focuses on the elements influencing DBPs formation. A total of 120 water samples were collected from 10 different drinking water facilities spanning 5 counties within Huzhou, Zhejiang Province, China. Concentrations of trihalomethanes (THMs) and haloacetic acids (HAAs) were observed to be 14.5 and 27.4 μg/L, respectively, constituting 34 and 64% of the total DBPs. Seasonal fluctuations demonstrated that HAAs, THMs, halonitromethanes (HNMs), and haloacetonitriles (HANs) followed a similar pattern with higher levels in summer or autumn compared to spring. Importantly, the concentrations of HAAs and THMs were markedly higher in Taihu-sourced water compared to other sources. Geographically, Nanxun exhibited the highest levels of total DBPs, HAAs, and THMs, while Deqing and Changxing demonstrated significantly lower levels. Correlation studies between water quality parameters and DBPs revealed that factors such as chloride content, temperature, and residual chlorine positively influenced DBPs formation, whereas turbidity negatively affected it. Principal component analysis suggested similar formation processes for HANs, haloketones (HKs), HNMs, and THMs. Factors such as temperature, chemical oxygen demand (COD), and residual chlorine were identified as significant contributors to the prevalence of HAAs.

New insight into the additives in preparation and reduction of shield slurry

In the preparation of the slurry in the slurry shield (SSS) and subsequent reduction of the waste slurry produced by the slurry shield (WSSS), the additives in SSS improve the quality of filtration cake on the excavation surface, but they may also remain in WSSS, which have a negative impact on the reduction efficiency of WSSS. Therefore, it is valuable to establish the relationship between SSS and WSSS with additives as a link. Given this, this paper prepared WSSS with different dosages of additives and studied the influence of residual additives on the reduction. The residual additives made the reduction efficiency of WSSS worse, and the specific resistance to filtration increased by one to two orders of magnitude. The residual additives change the content of bound water or reduce the available sites of the soil particles that can be adsorbed by flocculants, leading to worse reduction results. To reduce the difficulty of reduction, combining polymer and bentonite as additives are recommended to prepare SSS. Polyaluminium chloride (PAC) acts by reducing bound water content through the interaction with residual bentonite, simultaneously augmenting PAM flocculation, which is recommended for reducing WSSS. This paper provides a reference for selecting materials used to prepare SSS and the subsequent reduction of WSSS.

Visible light-driven ZnO/Fe3O4 magnetic nanoparticles for detoxification of diazinon: the photocatalytic optimization process with RSM-BBD model

Today, diazinon is one of the most widely used organophosphorus pesticides, whose widespread use can cause many ecological and biological risks. In this research, a magnetic ZnO/Fe3O4 nanoparticle was used to investigate the photocatalytic degradation of diazinon. Sol-gel synthesis was used to create the nanoparticle, which was then characterized using XRD, FTIR, FESEM, VSM, and XPS techniques. The design of photocatalytic degradation experiments was done using the response surface method and the Box-Behnken design model. The investigated parameters include pH, nanoparticle concentration, diazinon concentration, and irradiation time. The characterization of the ZnO/Fe3O4 nanoparticle showed well-formed crystalline phases and a cubic spinel structure. Additionally, the shape of the nanoparticle is almost uniform and spherical. The FT-IR spectrum also confirmed the presence of all functional groups related to ZnO and Fe3O4 in the ZnO/Fe3O4 nanoparticles structure. The synthesized nanocomposite has superparamagnetic properties and a very small coercive field, making it easily recyclable, according to a VSM analysis. XPS results also showed the presence of Fe (Fe 2p1/2 and Fe 2p3/2), Zn (Zn 2p1/2 and Zn 2p3/2), oxygen (O1s), and weak carbon (C1s) peaks in the ZnO/Fe3O4 structure. The results of the photocatalytic optimization experiments showed that the highest efficiency of diazinon toxin degradation is 99.3% under the conditions of pH 7, diazinon initial concentration of 10 mg/L, nanoparticle concentration of 1 g/L, and a contact time of 90 min. This result is very close to the BBD model's predicted removal efficiency under optimal conditions (100%). As a result, the ZnO/Fe3O4 nanocomposite can produce active free radicals through UV radiation, and these radicals can successfully remove diazinon under actual conditions.

Prospects and challenges of utilizing sugarcane bagasse as a bio-coagulant precursor for water treatment

Sugarcane bagasse is an abundant and renewable agricultural waste material generated by the sugar industry worldwide. The use of sugarcane bagasse as a bio-coagulant precursor in water treatment is an eco-friendly and cost-effective approach that has shown great potential. This article reviewed the prospects and challenges of utilizing sugarcane bagasse as a bio-coagulant precursor for water treatment. The article reviewed past studies and explored the properties and chemical composition of sugarcane bagasse and the bioactive compounds that can be extracted from it, as well as their potential coagulation performance in water treatment. It was observed that there are few studies that have been published on the subject. The effectiveness of sugarcane bagasse-based coagulants varies depending on several factors, such as pH, temperature, and water quality parameters. However, the lack of standardization in the production of sugarcane bagasse-based coagulants is a challenge that needs to be addressed. Additionally, the optimization of extraction and processing methods to enhance the effectiveness of sugarcane bagasse-based coagulants needs to be investigated further. In conclusion, the use of sugarcane bagasse as a bio-coagulant precursor holds great promise for the future of sustainable water treatment. The potential for sugarcane bagasse to be used as a bio-coagulant precursor highlights the importance of exploring alternative and sustainable materials for water treatment.

A dual-functional hydrogel for efficient water purification: Integrating solar interfacial evaporation with fenton reaction

Solar interfacial evaporation is a potential technology to produce clean water due to its simplicity and being driven by renewable clean energy, but it still requires further development to break through the bottleneck of removing volatile organic compounds (VOCs), especially in wastewater treatment. Herein, we proposed a dual-functional hydrogel evaporator that coupled solar interfacial evaporation with Fenton reaction to simultaneously remove VOCs and non-volatile pollutants from water with low energy consumption and high efficiency. The evaporator was composed with β-FeOOH and polydopamine (PDA) on an electrospun nanofibrous hydrogel. Arising from the PDA with excellent photothermal properties, the evaporator revealed a high light absorption characteristics (∼90%) and photothermal efficiency (83.4%), which ensured a favorable evaporation rate of 1.70 kg m-2 h-1 under one solar irradiation. More importantly, benefited from the coupled Fenton reaction, the VOCs removal rate of β-FeOOH@PDA/polyvinyl alcohol nanofibrous hydrogel (β-FeOOH@PPNH) reached 95.8%, which was 6.5 times than that of sole solar interfacial evaporation (14.8%). In addition, the evaporator exhibited an outstanding non-volatile pollutant removal capability and stable removal performance for organic pollutants over a long period of operation. The prepared β-FeOOH@PPNH evaporator provides a promising idea for simultaneous removal of non-volatile pollutants and volatile pollutants performance in long-term water purification.

Water quality of The Gambia River: A prospective drinking water supply

Drinking water in The Gambia is mostly derived from boreholes that could potentially be contaminated. The Gambia River, a major river in West Africa that covers 12 % of the country's area, could be more exploited for drinking water supply. During the dry season, the total dissolved solids (TDS), ranging from 0.02 to 33 g/L in The Gambia River, decreases with the distance to the river mouth with no major inorganic contamination. The freshwater (<0.8 g/L TDS) starts from Jasobo at approximately 120 km from the river mouth and extends by about 350 km to the eastern border of The Gambia. With a dissolved organic carbon (DOC) ranging from 2 to 15 mgC/L, the natural organic matter (NOM) of The Gambia River was characterised by 40-60 % humic substances of paedogenic origin. With such characteristics, unknown disinfection by-products could be formed if chemical disinfection, such as chlorination, was implemented during treatment. Out of 103 types of micropollutants, 21 were detected (4 pesticides, 10 pharmaceuticals, 7 per- and polyfluoroalkyl substances (PFAS)) with concentrations ranging from 0.1 to 1500 ng/L. Pesticides, bisphenol A and PFAS concentrations were below the stricter EU guidelines set for drinking water. These were mainly confined to the urban area of high population density near the river mouth, while the quality of the freshwater region of low population density was surprisingly pristine. These results indicate that The Gambia River, especially in its upper regions, would be well suited as a drinking water supply when using decentralised ultrafiltration treatment for the removal of turbidity, as well as, depending on pore size, to a certain extent microorganisms and DOC.

Elimination of a Mixture of Microplastics Using Conventional and Detergent-Assisted Coagulation

The research described here investigated the suitability of coagulation process in the elimination of microplastics from tap water. The purpose of the study was to assess the effects of microplastic type (PE1, PE2, PE3, PVC1, PVC2, and PVC3), tap water pH (3, 5, 7, and 9), coagulant doses (0, 0.025, 0.05, 0.1 and 0.2 g/L), and microplastic concentration (0.05, 0.1, 0.15, and 0.2 g/L) on elimination efficiency with coagulation utilizing Al and Fe coagulants as well coagulation combined with a detergent (SDBS) addition. This work also explores the elimination of a mixture of two microplastics (PE and PVC) that are significant in terms of the environment. The effectiveness of conventional and detergent-assisted coagulation was calculated as a percentage. The fundamental characteristics of microplastics were also determined via LDIR analysis, and on the basis of these findings, particles that were more coagulation-prone were identified. The maximum reduction in MPs was achieved with tap water's neutral pH and a coagulant dosage of 0.05 g/L. The addition of SDBS increased the loss of the plastic microparticles' efficacy. A removal efficiency of greater than 95% (Al-coagulant) and 80% (Fe-coagulant) was achieved for each of the microplastics tested. The removal efficiency of the microplastic mixture with SDBS-assisted coagulation was obtained at a level of 95.92% (AlCl₃·6H₂O) and 98.9% (FeCl₃·6H₂O). After each coagulation procedure, the mean circularity and solidity of the unremoved particles increased. This confirmed that particles with irregular shapes are easier to completely remove.

Molecular insights towards changing behaviors of organic matter in a full-scale water treatment plant using FTICR-MS

The changing behavior of organic matter in a full-scale water treatment process was characterized based on the three-dimensional excitation-emission matrix (3D-EEM) and Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). Polyaluminum chloride (PAC) as a coagulant can help to effectively remove soluble microbial by-products-like and aromatic protein-like substances during coagulation and sedimentation, corresponding to tannin and coagulated aromatic regions. The leakage of soluble microbial products during sand filtration resulted in an increase in the intensity of biomass-like regions. Nitrogen-containing compounds have higher weighted average value of double bond equivalents (DBE_w) and the modified aromaticity index (AI_mod-w) than nitrogen-free compounds. Water treatment can preferentially remove unsaturated nitrogen-containing compounds with more O atoms and higher-oxidation-state carbon. The dissolved organic carbon (DOC) and UV₂₅₄ were not correlated well with changes in nitrogen-containing compounds due to the preferential removal of nitrogen-containing compounds. This study revealed the specificity of organic matter removal during water treatment, and it was helpful in optimizing treatment processes for various raw water to ensure water quality.

The influence of coagulant type on the biological treatment of sewage sludge

Anaerobic digestion (AD) and composting are commonly utilized sludge management methods however, the influence of different coagulant types on these biological processes and their stabilized biomass characteristics have not been fully explained. In this study, the effect of the coagulant used in municipal wastewater treatment on the biological stabilization of sludge was investigated. Fully controlled and monitored small-scale AD and composting bioreactors were utilized. The coagulants tested included an inorganic coagulant (IC), polyaluminium chloride (PAC), and organic coagulants, (OC) polyamine (pAmine) and chitosan (Chit). Overall, the coagulant applied showed a measurable influence on the biological stabilization of sludge. The presence of complex organics compounds from OC in the sludge biomass was found to decrease biomass biodegradability while increasing gas production. During AD, Chit-sludge achieved higher biogas production than pAmine- and PAC-sludges (13 % and 16 %, respectively, in Nm³ CH₄ t^-1VS). In composting, pAmine-sludge achieved the highest feedstock temperature (34-35 °C) and CO₂ gas emissions, followed by Chit- (33 °C) and PAC-sludges (32 °C). Generally, tot-P concentration in PAC-sludge was higher than in pAmine and Chit-sludges both before (20, 17 and 15 g/kg DM, consecutively) and after AD (23, 21 and 20.5 g/kg DM, consecutively), and during the composting (31, 29.5 and 26 g/kg DM, consecutively) process. Tot-N concentrations (g/kg DM) showed a substantial increase after AD (pAmine and PAC ca 50 % and Chit 81 %), while a decrease was observed after composting, specifically in PAC-sludge (PAC 28 %, pAmine and Chit ⁓5 %). The selection of the most suitable coagulant by wastewater treatment facilities depends on the objective of the biological stabilization process. In cases where AD is applied and biogas yield is selected as the target output, the semi-natural OC Chit was found to be the best option among the coagulants tested. Comparably, when the nutrient content of resulting biosolids (AD or composting) is more relevant, it was found that OC-produced sludge contained higher N concentrations, while IC-produced sludge contained slightly higher P concentrations.

Removal of natural organic matter from surface water sources by nanofiltration and surface engineering membranes for fouling mitigation - A review

Given that surface water is the primary supply of drinking water worldwide, the presence of natural organic matter (NOM) in surface water presents difficulties for water treatment facilities. During the disinfection phase of the drinking water treatment process, NOM aids in the creation of toxic disinfection by-products (DBPs). This problem can be effectively solved using the nanofiltration (NF) membrane method, however NOM can significantly foul NF membranes, degrading separation performance and membrane integrity, necessitating the development of fouling-resistant membranes. This review offers a thorough analysis of the removal of NOM by NF along with insights into the operation, mechanisms, fouling, and its controlling variables. In light of engineering materials with distinctive features, the potential of surface-engineered NF membranes is here critically assessed for the impact on the membrane surface, separation, and antifouling qualities. Case studies on surface-engineered NF membranes are critically evaluated, and properties-to-performance connections are established, as well as challenges, trends, and predictions for the field's future. The effect of alteration on surface properties, interactions with solutes and foulants, and applications in water treatment are all examined in detail. Engineered NF membranes containing zwitterionic polymers have the greatest potential to improve membrane permeance, selectivity, stability, and antifouling performance. To support commercial applications, however, difficulties related to material production, modification techniques, and long-term stability must be solved promptly. Fouling resistant NF membrane development would be critical not only for the water treatment industry, but also for a wide range of developing applications in gas and liquid separations.

Comparison of UV-based advanced oxidation processes for the removal of different fractions of NOM from drinking water

This study examined the effectiveness for degradation of hydrophobic (HPO), transphilic (TPI) and hydrophilic (HPI) fractions of natural organic matter (NOM) during UV/H₂O₂, UV/TiO₂ and UV/K₂S₂O₈ (UV/PS) advanced oxidation processes (AOPs). The changing characteristics of NOM were evaluated by dissolved organic carbon (DOC), the specific UV absorbance (SUVA), trihalomethanes formation potential (THMFP), organic halogen adsorbable on activated carbon formation potential (AOXFP) and parallel factor analysis of excitation-emission matrices (PARAFAC-EEMs). In the three UV-based AOPs, HPI fraction with low molecular weight and aromaticity was more likely to degradate than HPO and TPI, and the removal efficiency of SUVA for HPO was much higher than TPI and HPI fraction. In terms of the specific THMFP of HPO, TPI and HPI, a reduction was achieved in the UV/H₂O₂ process, and the higest removal rate even reached to 83%. UV/TiO₂ and UV/PS processes can only decrease the specific THMFP of HPI. The specific AOXFP of HPO, TPI and HPI fractions were all able to be degraded by the three UV-based AOPs, and HPO content is more susceptible to decompose than TPI and HPI content. UV/H₂O₂ was found to be the most effective treatment for the removal of THMFP and AOXFP under given conditions. C1 (microbial or marine derived humic-like substances), C2 (terrestrially derived humic-like substances) and C3 (tryptophan-like proteins) fluorescent components of HPO fraction were fairly labile across the UV-based AOPs treatment. C3 of each fraction of NOM was the most resistant to degrade upon the UV-based AOPs. Results from this study may provide the prediction about the consequence of UV-based AOPs for the degradation of different fractions of NOM with varied characteristics.

Preparation and Coagulation Performance of Polyaluminum Lanthanum Silicate Coagulant

In order to address the growing problem of water pollution caused by the excessive discharge of contaminants and provide a better aquatic ecosystem for the public, increasing attention has been paid to the harmlessness and efficiency of coagulation. In this study, polyaluminum lanthanum silicate (PALS) was synthesized through co-polymerization as a novel coagulant to treat wastewater. FTIR, XRD, and SEM were used to analyze the morphology and structure of the material, which further confirmed that the PALS was successfully synthesized. The results indicated that PALS had a great performance in the treatment of a kaolin-humic acid suspension under the optimal synthesis conditions with Al/Si = 3, La/Si = 0.1, and basicity = 0.7. Compared with conventional coagulants, PALS exhibited a better performance at a low coagulant dose and could achieve a good removal effect for an ultraviolet wavelength less than 254 nm (UV254) (83.87%), residual turbidity (0.49 NTU), and dissolved organic carbon (DOC) (69.57%) at the optimal conditions. Additionally, the PALS showed a better effect on phosphate removal than other coagulants did, where the removal efficiency could reach 99.60%. Charge neutralization and adsorption bridging were the potential wastewater treatment mechanisms employed by the PALS, which showed varied contributions under different pH levels. The results indicated that PALS can be a promising coagulant in water treatment.

Removal effect of trihalomethanes (THMs) and halogenated acetic acids (HAAs) precursors in reclaimed water by polyaluminum chloride (PACl) coagulation

This study analyzed the removal effect of various doses of polyaluminum chloride (PACI) on wastewater treatment plants at pH 7. The sewage plant's secondary effluent organic matter (EfOM) separates into four components: hydrophobic base (HOB), hydrophilic (HI), hydrophobic acid (HOA), and hydrophobic neutral (HON). The removal effect for various forms of organic waste is optimum at 16 mg/L and that halogenated acetic acids (HAAs) and trihalomethanes (THMs) are formed simultaneously. After PACI treatment, hydrophobic organic compounds were converted to humic acid (HA), fulvic acid (FA), soluble microbial products (SMPs), and other HI organic compounds, increasing the amount of HAAs produced by HI fractions. Removal rate of hydrophobic organic compounds, particularly HON, is 92.8% when using PAC. Moreover, after EfOM coagulation, most HAAs are trichloroacetic acid (TCAA), followed by bromochloroacetic acid (BCAA) and bromodichloroacetic acid (BDCAA). Only HOB can produce monochloroacetic acid (MCAA), whereas HA and SMPs with HOA are primary components of dichloroacetic acid (DCAA). The toughest removable byproduct of THMs is CHBr₃, and after condensation of each THM component, only HOA and HON produce CHBr₃, while HI produces only a minimal quantity of CHBrCl₂ and CHCl₃.This finding is critical for understanding how disinfection byproducts are produced after chlorinating EfOM.

Synthesis of heated aluminum oxide particles impregnated with Prussian blue for cesium and natural organic matter adsorption: Experimental and machine learning modeling

Heated aluminum oxide particles impregnated with Prussian blue (HAOPs-PB) are synthesized for the first time using different molar ratios of aluminum sulfate and PB to improve the adsorption of cesium (¹³³Cs⁺) and natural organic matter (NOM) from an aqueous solution. The Cs⁺ adsorption from various aqueous solutions, including surface, tap and deionized water by synthesized HAOPs-PB, is investigated. The influencing factors such as HAOPs-PB mixing ratio, pH and dosage are studied. In addition, pseudo 1st and 2nd order is tested for adsorption kinetics study. A machine learning model is developed using gene expression programming (GEP) to evaluate and optimize the adsorption process for Cs⁺ and NOM removal. Synthesized adsorbent showed maximum adsorption at a 1:1 M ratio of aluminum sulfate and PB in DI, tap, and surface water. The pseudo 2nd order kinetics model described the Cs ⁺ adsorption by HAOPs-PB more accurately that indicating physiochemical adsorption. Adsorption of Cs⁺ showed an increasing trend with higher HAOPs-PB concentration, while high pH also favored the adsorption. Maximum NOM adsorption is found at a higher HAOPs-PB dosage and a neutral pH value. Furthermore, the proposed GEP model shows outstanding performance for Cs⁺ adsorption modeling, whereas a modified-GEP model presents promising results for NOM adsorption prediction for testing dataset by learning the relationship between inputs and output with R² values of 0.9348 and 0.889, respectively.

Treating mechanical washing wastewater with iron-in-oil characteristics by changing the fate of iron

The mechanical washing wastewater contained a large amount of oil, and the iron wrapped in the oil was slowly released into water. This caused the effluent quality to fluctuate, causing common polymeric aluminum chloride (PAC) to ineffectively remove the water-in-oil. The method uses Ca²⁺ to demulsify and ClO_x^- to destroy the water-in-oil structure, which releases Fe from the oil droplets. The active oxygen produced by NaClO_x further converts Fe²⁺ into Fe³⁺ and then combines with NaOH to form Fe(OH)₃-flocs core, which improves the flocculation efficiency of PAC. The optimal ratio was approximately 400 μL of NaClO_x, 200 μL of 1 mol L^-1 CaO, and 12 mL of 12.8 g L^-1 PAC. The oil removal rate reached 99.88% and the residue density was 178.42 mg L^-1. The maximum Fe and chemical oxygen demand (COD) removal rates were close to 49.2 and 99.89%, respectively. In field applications, wastewater should be acidified first, and acidification oxidation is more effective than direct oxidation. In short, a novel way for treating mechanically washed wastewater with iron-in-oil characteristics by changing the environmental fate of iron is provided.

Construction of titanium-aluminum xerogel composite coagulant for removal of tetracycline in water: synergy effects and improvement mechanisms insight

Titanium xerogel coagulant (TXC) is a new type of coagulant that has attracted much attention in recent years. However, the tetracycline removal performance of TXC was not satisfactory because low isoelectric point (pH_iep) inhibited the electrical neutralization efficiency of TXC in an alkaline environment. To overcome this shortcoming, a composite xerogel coagulant (titanium-aluminum xerogel composite coagulant) was prepared. The removal of tetracycline and turbidity was used as evaluation indexes. It was proved that the combination of aluminum (III) and titanium (IV) enhanced the resistance of TXC to pH. The synthesized titanium-aluminum xerogel composite coagulant (TXAC) has an excellent removal ability of tetracycline in a wide pH range (pH = 5-10). At pH 8.8, the dosage required to remove 80% tetracycline from water decreased from 93 (TXC) to 35 mg/L (TXAC). The reason for this improvement could be attributed to (i) aluminum (III) enhanced the electric neutralization of TXC to negatively charged pollutants in an alkaline environment; (ii) the complexing ability of organic matter and aluminum (III) was enhanced. This work provides a feasible scheme for the pretreatment of tetracycline in water to meet the pretreatment requirements of special water.

A review of long-term change in surface water natural organic matter concentration in the northern hemisphere and the implications for drinking water treatment

Reduced atmospheric acid deposition has given rise to recovery from acidification - defined as increasing pH, acid neutralization capacity (ANC), or alkalinity in surface waters. Strong evidence of recovery has been reported across North America and Europe, driving chemical responses. The primary chemical responses identified in this review were increasing concentration and changing character of natural organic matter (NOM) towards predominantly hydrophobic nature. The concentration of NOM also influenced trace metal cycling as many browning surface waters also reported increases in Fe and Al. Further, climate change and other factors (e.g., changing land use) act in concert with reductions in atmospheric deposition to contribute to widespread browning and will have a more pronounced effect as deposition stabilizes. The observed water quality trends have presented challenges for drinking water treatment (e.g., increased chemical dosing, poor filter operations, formation of disinfection by-products) and many facilities may be under designed as a result. This comprehensive review has identified key research areas to be addressed, including 1) a need for comprehensive monitoring programs (e.g., larger timescales; consistency in measurements) to assess climate change impacts on recovery responses and NOM dynamics, and 2) a better understanding of drinking water treatment vulnerabilities and the transition towards robust treatment technologies and solutions that can adapt to climate change and other drivers of changing water quality.

Enhancement of thioethers removal by pre-oxidation-coagulation: Effects of background organic matter

Swampy/septic odor caused by thioethers has become the main taste and odor (T&O) problem in drinking water of China. Improving its removal performance by commonly traditional water treatment process is significant. In our study, we have found that pre-oxidation could modify the background dissolved organic matter (DOM) properties and thus improve the coagulation performance of thioethers, increasing the coagulation removal rates by 1.5-3 times. Particularly, after pre-ozonation only protein-like substances remained, and thioethers removal was 1.5 times higher than that after pre-chlorination (only coagulation not including oxidation). Compared with humic acid (HA), the thioethers compounds removal efficiencies under bovine serum albumin (BSA) as background DOM was increased by 0.3-3 times. Through Freundlich model analysis, the binding strength of BSA (K_F = 20.712, at 298 K) to dimethyl disulfide (DMDS) was enhanced by 60 % compared to HA (K_F = 12.778, at 298 K). According to thermodynamic parameters, the binding effect between HA/BSA and thioethers compounds was mainly van der Waals forces and hydrogen bond. BSA with more amino structure and oxygen groups was more easily to adsorb DMDS through hydrogen bond and thus achieved better coagulation performance. Therefore, pre-ozonation combined with coagulation was suggested to be more suitable for thioethers compounds control.

Suitability of Highly Polymerised Polyaluminium Chlorides (PACls) in the Treatment of Mixture of Groundwater and Surface Water

The aim of this study was to evaluate the effectiveness of the coagulation process using highly polymerised polyaluminium chlorides in reducing the level of pollution of water in a mixture of groundwater and surface water. The coagulants used were prehydrolysed polyaluminium chlorides with the trade names PAXHP908 and PAXXL1911 that had alkalinity 85% and different iron contents (<0.01% and 0.7%). The Al species distribution in the PACls (PAXXL1911 ad PAXHP908) samples were analysed by the Ferron complexation timed spectrophotometry. The content of polymer forms of aluminium (Alb) in the tested coagulants was 40%. The worse results in the removal of organic matter (TOC, DOC, UV254), iron, colour and turbidity in the coagulation process were produced by the PAXXL1911, possessing higher content of iron (0.7%). The lower usefulness of the PAXXL1911 was probably caused by the interaction of organic ligands present in the treated water and Fe(III) ions introduced into the water with the coagulant. The effectiveness of the coagulation process with the tested coagulants was also evaluated by measuring the electrokinetic potential ζ, which determines the stability of the colloidal system.

Effect of Fe and Al based coagulants and disinfectants on polyethylene microplastics removal in coagulation process through response surface methodology

Microplastic (MP) pollution has been rising as a threatening risk and recently has appealed to the attention of more researchers. In this study, influential parameters affecting the removal rate of polyethylene microplastics (PEMPs) were optimized through response surface methodology (RSM). In Box Behnken Design (BBD), independent parameters were pH, PEMP size, coagulant dosage and polyacrylamide dosage. Two experimental sets were conducted, one with ferric chloride and the second with poly aluminum chloride as two commonly applied coagulants in drinking water treatment plants (DWTPs). Comparing the results of optimized parameters, PAC was a better coagulant with the predicted removal rate of 58.19%, while the removal rate with ferric chloride as a coagulant was predicted to be 56.37%. Moreover, some experiments were conducted to analyze the effect of ozone gas and sodium hypochlorite as disinfectants on removal rate. The highest removal rate was observed when 2 ppm of O₃ was added to the solution coagulated with optimal dosage of PAC, reaching the removal rate of 76.8%.

Synthesis and application of a carbon composite containing molecularly imprinted poly(methacrylic acid) for efficient removal of fenpyroximate pesticide

This work describes fabrication steps of the carbon composite based on molecular imprinted poly(methacrylic acid) (MIP-CC) as a new adsorbent for the selective removal of fenpiroxymate pesticide (Fen). The prepared composite was characterized using Brunauer-Emmett-Teller (BET), zeta sizer and Field Emission Scanning Electron Microscopy (FESEM) techniques. The influence of operational parameters such as solution pH, contact time, amount MIP for preparation of carbon composite and amount MIP- CC toward removal of Fen have been evaluated and optimized via central composite design (CCD) as an optimization tool of response surface method. The optimum removal (87%) was achieved at pH 6.5, 1.53 g/L carbon composite prepared with 3.4 wt % MIP at 70 min. The maximum adsorption of Fen by the fabricated MIP-CC was 254 mg/g. Compared with the corresponding non-imprinted polymer (NIP-CC), the MIP-CC exhibited higher adsorption capacity and outstanding selectivity toward Fen. Langmuir isotherm best fitted the adsorption equilibrium data of MIP-CC and the kinetics followed a pseudo-second-order model. The calculated thermodynamic parameters showed that adsorption of Fen pesticide was spontaneous and exothermic under the studied conditions.