Activation of peroxymonosulfate/persulfate by nanomaterials for sulfate radical-based advanced oxidation technologies

Mechanistic insights of PO43- functionalized carbon nitride homojunction hydrogels in photocatalytic-self-Fenton-peroxymonosulfate system for tetracycline degradation

In this study, metal-free PO43- enriched g-C3N4/g-C3N4 (PGCN) homojunction alginate 3D beads were developed for in-situ H2O2 production under visible light. Later, the photocatalytic-self-Fenton system was integrated with peroxymonosulfate for tetracycline degradation. Initially, the PO43- enriched g-C3N4 (PCN) and a homojunction composed of PCN and g-C3N4 (GCN) were prepared via the wet-impregnation method. Later, PGCN homojunction was formulated into 3D alginate beads through the blend-crosslinking method. The comprehensive characterization of the homojunction beads affirmed the closer contact between the semiconductors, alteration of the bandgap, faster channelization of electron-hole pairs, and improved separation of charge carriers that attributed to higher catalytic efficacy. The PGCN beads exhibited a maximum H2O2 production of 535 ± 12 µM under visible light irradiation for 60 min. The homojunction hydrogels displayed 99 ± 0.25 % tetracycline degradation in 20 min in the photocatalytic-self-Fenton-PMS system. The experimental studies also claimed a maximum chemical oxygen demand removal of 81 ± 3.6 % in 20 min with maximum reusability of beads up to 20 cycles. The Z-scheme electron migration mechanism is proposed based on the results aided by scavenger and electron spin resonance analysis. Overall, the as-synthesized alginate-supported homojunction-based photocatalytic-self-Fenton-peroxymonosulfate system is highly versatile and reusable for energy and environmental remediation.

A review of the present methods used to remediate soil and water contaminated with organophosphate esters and developmental directions

Organophosphate esters (OPEs) are widely used commercial additives, but their environmental persistence and toxicity raise serious concerns necessitating associated remediation strategies. Although there are various existing technologies for OPE removal, comprehensive screening for them is urgently needed to guide further research. This review provides a comprehensive overview of the techniques used to remove OPEs from soil and water, including their related influencing factors, removal mechanisms/degradation pathways, and practical applications. Based on an analysis of the latest literature, we concluded that (1) methods used to decontaminate OPEs include adsorption, hydrolysis, photolysis, advanced oxidation processes (AOPs), activated sludge processes, and microbial degradation; (2) factors such as the quantity/characteristics of the catalysts/additives, pH value, inorganic ion concentration, and natural organic matter (NOM) affect OPE removal; (3) primary degradation mechanisms involve oxidation induced by reactive oxygen species (ROS) (including •OH and SO4•-) and degradation pathways include hydrolysis, hydroxylation, oxidation, dechlorination, and dealkylation; (5) interference from the pH value, inorganic ion and the presence of NOM may limit complete mineralization during the treatment, impacting practical application of OPE removal techniques. This review provides guidance on existing and potential OPE removal methods, providing a theoretical basis and innovative ideas for developing more efficient and environmentally friendly techniques to treat OPEs in soil and water.

Persulfate activation with biochar supported nanoscale zero- valent iron: Engineering application for effective degradation of NCB in soil

Nitrochlorobenzene (NCB) is very common in pesticide and chemical industries, which has become a major problem in soil environment. However, the remediation of NCB contaminated soil is received finite concern. Using biochar as a substrate for nanoscale-zero valent iron (nZVI/p-BC) to activate peroxodisulfate (PDS), a novel heterogeneous oxidative system had been applied in the current study to remediate NCB contaminants in soil. The degradation efficiencies and kinetics of m-NCB, p-NCB, and o-NCB by various systems were contrasted in soil slurry. Key factors including the dosage of nZVI/p-BC, the molar ratio of nZVI/PDS, initial pH and temperature on degradation of NCB were further examined. The results confirmed that the nZVI/p-BC/PDS displayed the remarkable performance for removing NCB compared with other systems. Higher temperature with nZVI/PDS molar ratio of 2:1 under the acidic condition favored the reduction of NCB. The treatment for NCB with optimal conditions were evaluated for the engineering application. The mechanism of nZVI/p-BC/PDS indicated that electron transfer between p-BC and nZVI was responsible for activation of PDS, generating active species (SO4•-, •OH and 1O2) via both the free and non-free radical pathways. Experimental results revealed prominent availability of nZVI/p-BC/PDS system in remediation of actual contaminated field by NCB.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Gold core@CeO2 halfshell Janus nanocomposites catalyze targeted sulfate radical for periodontitis therapy

The sulfate radical (SO4•-), known for its high reactivity and long lifespan, has emerged as a potent antimicrobial agent. Its exceptional energy allows for the disruption of vital structures and metabolic pathways in bacteria that are usually inaccessible to common radicals. Despite its promising potential, the efficient generation of this radical, particularly through methods involving enzymes and photocatalysis, remains a substantial challenge. Here, we capitalized on the peroxidase (POD)-mimicking activity and photocatalytic properties of cerium oxide (CeO2) nanozymes, integrating these properties with the enhanced concept of plasma gold nanorod (GNR) to develop a half-encapsulated core@shell GNRs@CeO2 Janus heterostructure impregnated with persulfate. Under near-infrared irradiation, the GNRs generate hot electrons, thereby boosting the CeO2's enzyme-like activity and initiating a potent reactive oxygen species (ROS) storm. This distinct nanoarchitecture facilitates functional specialization, wherein the heterostructure and efficient light absorption ensured continuous hot electron flow, not only enhancing the POD-like activity of CeO2 for the production of SO4•- effectively, but also contributing a significant photothermal effect, disrupting periodontal plaque biofilm and effectively eradicating pathogens. Furthermore, the local temperature elevation synergistically enhances the POD-like activity of CeO2. Transcriptomics analysis, as well as animal experiments of the periodontitis model, have revealed that pathogens undergo genetic information destruction, metabolic disorders, and pathogenicity changes in the powerful ROS system, and profound therapeutic outcomes in vivo, including anti-inflammation and bone preservation. This study demonstrated that energy transfer to augment nanozyme activity, specifically targeting ROS generation, constitutes a significant advancement in antibacterial treatment.

Superior performance of oxygen vacancy-enriched Cu-Co3O4/urushiol-rGO/peroxymonosulfate for hypophosphite and phosphite removal by enhancing singlet oxygen

The treatment of wastewater containing hypophosphite [P(I)] and phosphite [P(III)] is challenged by limitations of traditional Fenton oxidation such as low efficiency, secondary pollution and high costs. This study introduced a facile solvent-thermal method to synthesize Cu-Co3O4 nanoparticles uniformly loaded on graphene (Cu-Co3O4/U-rGO) through the reduction and coordination effects of urushiol (U). As prepared Cu-Co3O4/U-rGO exhibited excellent activity in activating peroxymonosulfate (PMS) for the oxidation of P(I)/P(III) to phosphate [P(V)] (0.229 min-1), along with high stability and reusability (91.5 % after 6 cycles), low metal leaching rate (Co: 0.2 mg/L, Cu: 0.05 mg/L), insensitivity to common anions in water and a wide pH range (3-11). The activation mechanism involved the synergistic effects from both urushiol and graphene, which promoted redox of Cu+/Cu2+ and Co2+/Co3+ and induced abundant oxygen vacancies for PMS activation to produce singlet oxygen. Furthermore, the Cu-Co3O4/U-rGO/PMS was also excellent in the oxidative removal of organic phosphorus. This study is expected to advance strategies for the treatment of P(I)/P(III)-rich wastewater and provide new insights for the development of low-cost, highly efficient heterogeneous catalysts with abundant oxygen vacancies.

A Comprehensive Review on Modification of Titanium Dioxide-Based Catalysts in Advanced Oxidation Processes for Water Treatment

It has become necessary to develop effective strategies to prevent and reduce water pollution as a result of the increase in dangerous pollutants in water reservoirs. Consequently, there is a need to design new catalyst materials to promote the efficiency of advanced oxidation processes (AOPs) in the field of wastewater treatment plant to ensure the mineralization of trace organic contaminants. A notable approach gaining attention involves the coupling of sulfate radicals-based AOPs to photocatalysis or electrocatalysis processes, aiming to achieve the complete removal of refractory contaminants into water and carbon dioxide. Titanium dioxide as metal oxide has received great attention for its catalytic application in water purification. TiO2 catalysts offer a multitude of advantages in AOPs. They are characterized by their high photocatalytic activity under both ultraviolet and visible light, making them environmentally friendly due to the absence of toxic byproducts during oxidation. Their versatility is remarkable, finding utility in various AOPs, from photocatalysis to photo-Fenton processes. TiO2's durability ensures long-lasting catalytic activity, which is crucial for continuous treatment processes, and their cost-effectiveness is particularly advantageous. Furthermore, their chemical stability allows it to withstand varying pH conditions. However, the large band gap energy and low electrical conductivity hinder the catalytic reaction effectiveness. This review aims to examine various approaches to enhance the catalytic performance of titanium dioxide, with the objective of enabling more efficient water purification methods.

Chalcopyrite functionalized ceramic membrane for micropollutants removal and membrane fouling control via peroxymonosulfate activation: The synergy of nanoconfinement effect and interface interaction

This work developed a novel chalcopyrite (CuFeS2) incorporated catalytic ceramic membrane (CFSCM), and comprehensively evaluated the oxidation-filtration efficiency and mechanism of CFSCM/peroxymonosulfate (PMS) for organics removal and membrane fouling mitigation. Results showed that PMS activation was more efficient in the confined membrane pore structure. The CFSCM50/PMS filtration achieved almost complete removal of 4-Hydroxybenzoic acid (4-HBA) under the following conditions: pH = 6.0, CPMS = 0.5 mM, and C4-HBA = 10 mg/L. Meanwhile, the membrane showed good stability after multiple uses. During the reaction, SO4•- and •OH were generated in the CFSCM50/PMS system, and SO4•- was considered to be the dominant reactive species for pollutant removal. The roles of copper, iron, and sulfur species, as well as the possible catalytic mechanism were also clarified. Besides, the CFSCM50/PMS catalytic filtration exhibited excellent antifouling properties against NOM with reduced reversible and irreversible fouling resistances. The Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory analysis showed an increased in repulsive energy at the membrane-foulant interface in the CFSCM50/PMS system. Membrane fouling model analysis indicated that standard blocking was the dominant fouling pattern for CFSCM50/PMS filtration. Overall, this work demonstrates an efficient catalytic filtration process for foulants removal and outlines the synergy of catalytic oxidation and interface interaction.

Ferrocene crosslinked and functionalized chitosan microspheres towards bio-based Fenton-like system for the removal of organic pollutants

Dye-containing wastewater treatment has been a major long-term global challenge. For this purpose, a novel bio-based microspheres (CS-FC) with high specific surface area (63.24 m2·g-1) and nano-channels (17.95 nm) was prepared using chitosan as the framework and ferrocene as a crosslinking active group. CS-FC not only has the ability to rapidly enrich methyl orange (MO) through hydrogen-bonding and electrostatic attraction, but also almost completely degrades it in the presence of H2O2/K2S2O8 through a synergistic radical/non-radical mechanism under the activating effect of ferrocene. Without H2O2/K2S2O8, the maximum MO adsorption capacity of CS-FC is in the range 871-1050 mg·g-1, and conforms to a Langmuir isothermal model with pseudo-second-order kinetics. In the presence of H2O2/K2S2O8, the removal of MO dramatically increased from 32 % to nearly 100 % after incubation for 60 min, due to the simultaneous formation of highly reactive 1O2 and ·OH. The significant contribution from 1O2 endowed CS-FC/H2O2/K2S2O8 with high universality for degrading various organic pollutants (including azo dyes and antibiotics), a wide pH window (2-8), and low sensitivity to co-existing ions. Such cost-effective, recyclable porous bio-based microspheres are suitable for heterogeneous Fenton-like catalysis in organic wastewater treatment that rely on synergistic radical/non-radical reaction pathways.

One-pot solvothermal synthesis of Cu-Fe-MOF for efficiently activating peroxymonosulfate to degrade organic pollutants in water:Effect of electron shuttle

Persulfate-based advanced oxidation processes (PS-AOPs) show a bright prospect in sewage purification. The development of efficient catalysts with simple preparation process and eco-friendliness is the key for their applying in practical water treatment. Herein, a bimetallic Cu-Fe metal organic framework (MOF) was simply synthesized by using one-pot solvothermal methods and employed for activating peroxymonosulfate (PMS) to degrade organic pollutants in water. The Cu-Fe-MOF/PMS exhibited excellent degradation efficiencies (over 95% in 30 min) for a variety of pollutants, including phenol, bisphenol A, 2,4-dichlorophenol, methyl blue, rhodamine B, tetracycline and sulfamethoxazole. The degradation efficiency was impacted by dosages of Cu-Fe-MOF, PMS concentrations, reaction temperature, solution pH and anionic species. Phenol could be efficiently decomposed in a wide pH range of 5-9, with the highest degradation and mineralization efficiency of nearly 100% and 70%, respectively. Free radicals and non-free radicals participated in degrading of phenol at the same time, with dominantly free radical process, because sulfate radicals (SO4·-) and hydroxyl radicals (·OH) were the primary active substances by contribution calculation. Cu-Fe-MOF was acted as electron shuttle between molecules of phenol and PMS, and the cooperation effect of Fe and Cu on the Cu-Fe-MOF promoted the electron transfer, achieving the high degradation efficiency of phenol. Thus, Cu-Fe-MOF is an ideal catalyst for activating PMS, which is conducive to promote the applying of catalyst-activated PMS processes for practical wastewater treatments.

Insights into the mechanism of multiple Cu-doped CoFe2O4 nanocatalyst activated peroxymonosulfate for efficient degradation of Rhodamine B

The multiple metal catalyst as a promising nanomaterial has shown excellent activity in the peroxymonosulfate (PMS) activation for pollutant degradation. However, the role of special sites and in-depth understanding of the PMS activation mechanism are not fully studied. In this study, a Cu-doped CoFe2O4 nanocatalyst (0.5CCF) was synthesized by a sol-gel and calcination method, and used for PMS activation to remove Rhodamine B (RhB). The results showed that the Cu doping obviously enhanced the catalytic performance of CoFe2O4, with 99.70% of RhB removed by 0.5CCF while 74.91% in the CoFe2O4 within 15 min. Based on the X-ray photoelectron spectroscopy and electrochemical analysis, this could be ascribed to the more low valence of Co and Fe species generated on the 0.5CCF and faster electron transfers occurred in the 0.5CCF due to the Cu doping. In addition, Cu doping could provide more reaction sites for the 0.5CCF to activate PMS for RhB removal. The metal species and the surface hydroxyl were the reaction sites of PMS activation, and the surface hydroxyl played an important role in surface-bound reactive species generation. During the PMS activation, the Cu not only activated PMS to produce reactive oxygen species (ROS), but also regenerated Co2+ and Fe2+ to accelerate the PMS activation. The non-radical of 1O2 was the main ROS with a 99.35% of contribution rate, and the SO5•- self-reaction was its major source. This study provides a new insight to enhance the PMS activation performance of multiple metal catalysts by Cu doping in wastewater treatment.

Architecture engineering of Fe/Fe2O3@MoS2 enables highly efficient tetracycline remediation via peroxymonosulfate activation: Critical roles of adsorption capacity and redox cycle regulation

Design and synthesis of high-efficiency multicomponent nanostructure for activating peroxymonosulfate (PMS) to destruct emerging antibiotics remains a daunting challenge. We report herein the simplest one-step hydrothermal construction of hierarchical Fe/Fe2O3@MoS2 architecture composed of MoS2 nanosheets integrated commercial Fe2O3 nanoparticles. The fabricated Fe/Fe2O3@MoS2 architecture can be utilized as an efficient PMS activator to destruct tetracycline hydrochloride (TCH) with a removal efficiency of 90.3 % within 40 min, outperforming Fe2O3 nanoparticles, MoS2 nanosheets analogues and many MoS2-based materials. The Fe/Fe2O3@MoS2/PMS works well under various reaction conditions, and SO4•- and 1O2 are identified as major reactive oxygen species. Thirteen intermediates towards TCH destruction are detected via four pathways, and their acute/chronic toxicity and phytotoxicity are assessed. The origins of Fe/Fe2O3@MoS2/PMS system for efficient degrading TCH are ascribed to the synergy catalysis between Fe2O3 and MoS2, which originate from: (a) the exposed Mo4+ sites on catalyst surface facilitating high-speed electron transfer from MoS2 to Fe3+ and accelerating the Fe2+ regeneration; (b) the generated Fe0 serving as an excellent electron donor to jointly promote Fe3+/Fe2+ redox cycle. This study provides a simple way to establish architecture for synergistically promoting PMS-mediated degradation.

Highly dispersed Fe7S8 anchored on sp2/sp3 hybridized carbon boosting peroxymonosulfate activation for enhanced EOCs elimination though singlet oxygen-dominated nonradical pathway

The synergistic effect of carbon materials with high sp2/sp3 hybridized carbon ratio and metal materials can enhance the efficiency of peroxymonosulfate (PMS) based advanced oxidation processes. In this study, a composite of highly dispersed Fe7S8 anchored on sp2/sp3 hybridized carbon (Fe7S8@HC) was developed by a facile synthesis for PMS activation. Within 10 min, the removal efficiency of the target pollutant doxycycline (DOX) could reach ca. 96 % in optimal Fe7S8@HC/PMS system through a 1O2-dominated non-radical pathway. Correlation mechanism analysis revealed that thiophene S, sp2/sp3 ratio and Fe(II) were critical factors for elongating of the O-O bond of PMS. Moreover, the Fe7S8@HC/PMS system exhibited favorable adaptability to interference such as common inorganic anions, humic acid and pH changes and could effectively remove various organic pollutants with low ionization potential. Moreover, the system maintained high DOX removal efficiency by running 30 cycles in a continuous flow reactor. Finally, susceptible sites of DOX and four degradation pathways were proposed by density functional theory calculation and LC-MS detection. This work not only offered new insights into the design of high-performance catalysts combining metal and biomass-based carbon materials, but also provided technical support for the remediation of water bodies containing emerging organic contaminants.

Size-matched hierarchical porous carbon materials anchoring single-atom Fe-N4 sites for PMS activation: An in-depth study of key active species and catalytic mechanisms

Single-atom catalysts are considered to be one of the most promising catalysts for AOPs. However, how to design and synthesize cost-effective and highly loaded single-atom catalysts is the bottleneck limiting its development and application. In this study, we report a highly loaded single-atom iron catalyst (Fe-SAC-BC) using waste biomass as a carbon carrier to anchor Fe-N4 sites. The catalyst showed excellent catalytic performance and stability in wastewater treatment. Unlike conventional radical oxidation, the non-radical degradation process of Fe-N4 as the active site and high-valent iron-oxygen intermediates as the key active species identified by burst and probe experiments. DFT calculations and molecular dynamics simulations were applied to the catalytic mechanism of Fe-SAC-BC, in which Fe (III)-N4 is the most likely active site and Fe (IV)-OH is the most dominant active species. This study provides new strategies and understanding for the design of novel single-atom catalysts and the mechanistic probing of the non-radical pathways of AOPs.

Insight into disparate nonradical mechanisms of peroxymonosulfate and peroxydisulfate activation by N-doped oxygen-rich biochar: Unraveling the role of active sites

In this study, we first comprehensively studied peroxymonosulfate (PMS) and peroxydisulfate (PDS) activation mechanisms using N, O codoped sludge biochar (NOSB) to degrade organics from water. Among the catalysts, NOSB with a higher content of graphitic N, optimal edge nitrogen (pyridinic N and pyrrolic N), CO groups, sp2-hybridized C, and rich defects were demonstrated to be a superior catalyst. Therefore, by activating PDS and PMS, NOSB exhibited the highest rate of BPA degradation, which was 22-fold and 13-fold that of pristine sludge biochar, respectively. However, owing to different oxidation potentials and molecular structures, PMS and PDS show different degradation performances due to various catalytic mechanisms occurring, even with the same biochar. Due to the asymmetrical structure of PMS, electrons passed from PMS to NOSB and further generated singlet oxygen (1O2), which governs the degradation of bisphenol A with an auxiliary contribution of single electron transfer. Meanwhile, PDS is reduced at the Lewis basic sites of NOSB, forming inner-surface-bound {PDS-NOSB}, which was oxidizing around neighboring carbon and decomposed targets through transferring single and double electrons. NOSB is promising for practical applications because of its adaptation to a wide pH range, anions, high total organic carbon removal, tunable active sites, and re-usability for degrading organics via PMS/PDS activation. This study unveils knowledge about N, O codoped sludge biochar catalysts for activating PMS/PDS and advocates a great approach for organics' degradation in the environment.

Efficient degradation and detoxification of antibiotic Fosfomycin by UV irradiation in the presence of persulfate

Fosfomycin (FOS) as a widely used antibiotic has been found in abundance throughout the environment, but little effort has been devoted to its treatment. In this study, we systemically looked into the degradation of FOS by ultraviolet-activated persulfate (UV/PS) in aqueous solutions. Our findings demonstrated that FOS can be degraded efficiently under the UV/PS, e.g., >90 % of FOS was degraded with 19,200 mJ cm-2 of UV irradiance and 20 μM of PS. HO was the dominant radical responsible for FOS degradation. FOS degradation increased as PS dosage increased, and higher degradation efficiency was observed at neutral pH. Natural water constitutes either promoted (e.g., Cu2+, Fe3+, and SO42-) or inhibited (e.g., humic acid, HCO3-, and CO32-) FOS degradation to varying degrees. Hydroxyl substitution, CP bond cleavage, and coupling reactions were the major degradation pathways for FOS degradation. Finally, the toxicity evaluation revealed that FOS was toxic to E. coli and S. aureus, but the toxicity of the intermediate products of FOS to E. coli and S. aureus rapidly decreased over time after UV/PS treatment. Therefore, these findings provided a fundamental understanding of the transformation process of FOS and supplied useful information for the environmental elimination of FOS contamination and its toxicity.

Singlet oxygen in the removal of organic pollutants: An updated review on the degradation pathways based on mass spectrometry and DFT calculations

The degradation of pollutants by a non-radical pathway involving singlet oxygen (1O2) is highly relevant in advanced oxidation processes. Photosensitizers, modified photocatalysts, and activated persulfates can generate highly selective 1O2 in the medium. The selective reaction of 1O2 with organic pollutants results in the evolution of different intermediate products. While these products can be identified using mass spectrometry (MS) techniques, predicting a proper degradation mechanism in a 1O2-based process is still challenging. Earlier studies utilized MS techniques in the identification of intermediate products and the mechanism was proposed with the support of theoretical calculations. Although some reviews have been reported on the generation of 1O2 and its environmental applications, a proper review of the degradation mechanism by 1O2 is not yet available. Hence, we reviewed the possible degradation pathways of organic contaminants in 1O2-mediated oxidation with the support of density functional theory (DFT). The Fukui function (FF, f-, f+, and f0), HOMO-LUMO energies, and Gibbs free energies obtained using DFT were used to identify the active site in the molecule and the degradation mechanism, respectively. Electrophilic addition, outer sphere type single electron transfer (SET), and addition to the hetero atoms are the key mechanisms involved in the degradation of organic contaminants by 1O2. Since environmental matrices contain several contaminants, it is difficult to experiment with all contaminants to identify their intermediate products. Therefore, the DFT studies are useful for predicting the intermediate compounds during the oxidative removal of the contaminants, especially for complex composition wastewater.

Sulfate Radical in (Photo)electrochemical Advanced Oxidation Processes for Water Treatment: A Versatile Approach

The search for a simple and clean approach toward the production of sulfate radicals for water treatment gave rise to electrochemical and photoelectrochemical activation techniques. The photoelectrochemical activation method does not just distinguish itself as a promising activation method, it is also used as an efficient water treatment method with the ability to treat a myriad of pollutants due to the complementary effects of highly reactive oxidizing species. This perspective highlights some merits that distinguish sulfate monoanion radicals from hydroxyl radicals. It highlights the electrochemical, photoelectrochemical, and in situ photoelectrochemical routes of generating sulfate radicals for advanced oxidation process approach to water treatment. We provide a detailed account of the few known applications of sulfate radical enhanced photoelectrochemical treatments of water laden with organics. Finally, we placed this area of research in perspective by providing outlooks and conclusive remarks.

Implementation of laser flash photolysis for radical-induced reactions and environmental implications

Confronted with the imperative crisis of water quality deterioration, the pursuit of state-of-the-art decontamination technologies for a sustainable future never stops. Fitting into the framework of suitability, advanced oxidation processes have been demonstrated as powerful technologies to produce highly reactive radicals for the degradation of toxic and refractory contaminants. Therefore, investigations on their radical-induced degradation have been the subject of scientistic and engineering interests for decades. To better understand the transient nature of these radical species and rapid degradation processes, laser flash photolysis (LFP) has been considered as a viable and powerful technique due to its high temporal resolution and rapid response. Although a number of studies exploited LFP for one (or one class of) specific reaction(s), reactions of many possible contaminants with radicals are largely unknown. Therefore, there is a pressing need to critically review its implementation for kinetic quantification and mechanism elucidation. Within this context, we introduce the development process and milestones of LFP with emphasis on compositions and operation principles. We then compare the specificity and suitability of different spectral modes for monitoring radicals and their decay kinetics. Radicals with high environmental relevance, namely hydroxyl radical, sulfate radical, and reactive chlorine species, are selected, and we discuss their generation, detection, and implications within the frame of LFP. Finally, we highlight remaining challenges and future perspectives. This review aims to advance our understandings of the implementation of LFP in radical-induced transient processes, and yield new insights for extrapolating this pump-probe technique to make significant strides in environmental implications.

Oxygen doped graphite carbon nitride as efficient metal-free catalyst for peroxymonosulfate activation: Performance, mechanism and theoretical calculation

In this study, oxygen-doped graphitic carbon nitride (g-C3N4), named O-g-C3N4, was successfully fabricated and characterized, and its performance in activating peroxymonosulfate (PMS, HSO5-) for the removal of phenol, 2,4-dichlorophenol (2,4-DCP), bisphenol A (BPA), rhodamine B (RhB), reactive brilliant blue (RBB) and acid orange 7 (AO7) was evaluated. The catalytic performance of O-g-C3N4 for AO7 removal increased by 14 times compared to g-C3N4. In the presence of 0.2 g L-1 O-g-C3N4, 3.5 mM PMS at natural pH 5.8, 96.4% of AO7 could be removed in 60 min, reduced toxicity of the treated AO7 solution was obtained, and the mineralization efficiency was 47.2% within 120 min. Density functional theory (DFT) calculations showed that the charge distribution changed after oxygen doping, and PMS was more readily adsorbed by O-g-C3N4 with the adsorption energy (Eads) of -0.855 kcal/mol than that of the pristine g-C3N4 (Eads: -0.305 kcal/mol). Mechanism investigation implied that AO7 was primarily removed by the sulfate radicals (SO4•-) and hydroxyl radicals (•OH) on the surface of O-g-C3N4, but the role of singlet oxygen (1O2) to AO7 elimination was negligible. The results of cyclic experiments and catalyst characterization after reaction confirmed the favorable catalytic activity and structural stability of O-g-C3N4 particles. Furthermore, the O-g-C3N4/PMS system was very resistant to most of the environmental impacts, and AO7 removal was still acceptable in natural water environment. This study may provide an efficient metal-free carbonaceous activator with low dosage for PMS activation to remove recalcitrant organic pollutants (ROPs).

Research progress of MOF-based membrane reactor coupled with AOP technology for organic wastewater treatment

MOF-based catalytic membrane reactor (MCMR), which can simultaneously achieve membrane separation and chemical catalytic degradation in an integrated system, is a cutting-edge technology for effective treatment of organic pollutants in water. The coupling of MCMR and advanced oxidation process (AOP) not only significantly improves the pollutant removal efficiency but also inhibits the membrane pollution through self-cleaning effect, thus improving the stability of MCMR. This paper reviews different MCMR systems combined with photocatalysis, Fenton oxidation, and persulfate activation, elucidates the reaction mechanism, discusses key issues to improve system effectiveness, and suggests future challenges and research directions.

Quaternized chitosan coated copper sulfide nanozyme with peroxidase-like activity for synergistic antibacteria and promoting infected wound healing

Bacterial infection can hinder the infected wound healing process. Because of the growing drug-resistance bacteria, there is an urgent desire to develop alternative antibacterial strategies to the antibiotics. Herein, the quaternized chitosan coated CuS (CuS-QCS) nanozyme with peroxidase (POD)-like activity was developed through a facile biomineralized approach for synergistic efficient antibacterial therapy and wound healing. The CuS-QCS killed bacteria by the electrostatic bonding of positive charged QCS with bacteria and releasing Cu2+ to damage bacterial membrane. And importantly, CuS-QCS nanozyme exhibited higher intrinsic POD-like activity, which converted H2O2 with low concentration into highly toxic hydroxyl radical (OH) for the elimination of bacteria by oxidative stress. Through cooperation of POD-like activity, Cu2+ and QCS, CuS-QCS nanozyme exhibited excellent antibacterial efficacy of approximate 99.9 % against E. coli and S. aureus in vitro. In addition, the QCS-CuS was successfully used to promote the healing of S. aureus infected wound with good biocompatibility. This synergistic nanoplatform presented here shows great potential applications in the field of wound infection management.

High-efficient removal of arsenic(III) from wastewater using combined copper ferrite@biochar and persulfate

Arsenic (As) is a potentially toxic element with variable valence states. Due to high toxicity and bioaccumulation, As can pose a severe threat to the quality of the ecology as well as human health. In this work, As(III) in water was effectively removed by biochar-supported copper ferrite magnetic composite with persulfate. The copper ferrite@biochar composite exhibited higher catalytic activity than copper ferrite and biochar. The removal of As(III) could reach 99.8% within 1 h under the conditions of initial As(III) concentration at 10 mg/L, initial pH at 2-6, and equilibrium pH at 10. The maximum adsorption capacity of As(III) by copper ferrite@biochar-persulfate was 88.9 mg/g, achieving superior performance than mostly reported the metal oxide adsorbents. By means of a variety of characterization techniques, it was found that ∙OH acted as the main free radical for removing As(III) in the copper ferrite@biochar-persulfate system and the major mechanisms were oxidation and complexation. As a natural fibre biomass waste-derived adsorbent, ferrite@biochar presented a high catalytic efficiency and easy magnetic separation for As(III) removal. This study highlights the great potential of copper ferrite@biochar-persulfate application in As(III) wastewater treatment.

Accelerated radical generation from visible light driven peroxymonosulfate activation by Bi2MoO6/doped gCN S-scheme heterojunction towards Amoxicillin mineralization: Elucidation of the degradation mechanism

A novel S-scheme photocatalyst Bi₂MoO₆ @doped gCN (BMO@CN) was prepared through a facile microwave (MW) assisted hydrothermal process and further employed to degrade Amoxicillin (AMOX), by peroxymonosulfate (PMS) activation with visible light (Vis) irradiation. The reduction in electronic work functions of the primary components and strong PMS dissociation generate abundant electron/hole (e^-/h⁺) pairs and SO₄^*-,*OH,O₂^*-reactive species, inducing remarkable degeneration capacity. Optimized doping of Bi₂MoO₆ on doped gCN (upto 10 wt%) generates excellent heterojunction interface with facile charge delocalization and e^-/h⁺ separation, as a combined effect of induced polarization, layered hierarchical structure oriented visible light harvesting and formation of S-scheme configuration. The synergistic action of 0.25 g/L BMO(10)@CN and 1.75 g/L PMS dosage can degrade 99.9% of AMOX in less than 30 min of Vis irradiation, with a rate constant (k_obs) of 0.176 min^-1. The mechanism of charge transfer, heterojunction formation and the AMOX degradation pathway was thoroughly demonstrated. The catalyst/PMS pair showed a remarkable capacity to remediate AMOX-contaminated real-water matrix. The catalyst removed 90.1% of AMOX after five regeneration cycles. Overall, the focus of this study is on the synthesis, illustration and applicability of n-n type S-scheme heterojunction photocatalyst to the photodegradation and mineralization of typical emerging pollutants in the water matrix.

Zero valent iron-electro-Fenton-peroxymonosulfate (ZVI-E-Fenton-PMS) process for industrial wastewater treatment

Advanced oxidation processes are frequently applied to a variety of refractory organic wastewater, but rarely is electro-Fenton combined with activated persulfate technology applied to the removal of refractory pollutants. In this work, the electro-Fenton process was combined with zero-valent iron (ZVI) activated peroxymonosulfate (PMS), two advanced oxidation processes based on different radicals, to form the ZVI-E-Fenton-PMS process to treat wastewater, whose main advantages are the generation of more reactive oxygen species and the reduction of oxidant cost to achieve rapid removal of pollutants. This process can not only produce H₂O₂ and activate PMS at the cathode, but also reduce Fe(iii) to realize the sustainable Fe(iii)/Fe(ii) redox cycle. The main reactive oxygen species in the ZVI-E-Fenton-PMS process were found to be ˙OH, SO₄˙^- and ¹O₂ by radical scavenging experiments and electron paramagnetic resonance (EPR), and the relative contributions of the three reactive oxygen species for the degradation of MB were estimated to 30.77%, 39.62% and 15.38%, respectively. Then, by calculating the ratio of the relative contributions of each component to the removal of pollutants at different PMS doses, it was found that the synergistic effect of the process was better when the proportion of ˙OH in the oxidation of reactive oxygen species (ROS) was higher and the proportion of non-ROS oxidation increased year-on-year. This study provides a new perspective on the combination of different advanced oxidation processes and reveals the advantages and potential of this process for application.

The debatable role of singlet oxygen in persulfate-based advanced oxidation processes

Singlet oxygen (¹O₂) attracts much attention in persulfate-based advanced oxidation processes (PS-AOPs), because of its wide pH tolerance and high selectivity toward electron-rich organics. However, there are conflicts about the ¹O₂ role in PS-AOPs on several aspects, including the formation of different key reactive oxygen species (ROS) at similar active sites, pH dependence, broad-spectrum activity, and selectivity in the elimination of organic pollutants. To a large degree, these conflicts root in the drawbacks of the methods to identify and evaluate the role of ¹O₂. For example, the quenchers of ¹O₂ have high reactivity to other ROS and persulfate as well. In addition, electron transfer process (ETP) also selectively oxidizes organics, having a misleading effect on the identification of ¹O₂. Therefore, in this review, we summarized and discussed some basic properties of ¹O₂, the debatable role of ¹O₂ in PS-AOPs on multiple aspects, and the methods and their drawbacks to identify and evaluate the role of ¹O₂. On the whole, this review aims to better understand the role of ¹O₂ in PS-AOPs and further help with its reasonable utilization.

Tetracycline hydrochloride degradation by activation of peroxymonosulfate with lanthanum copper Ruddlesden-Popper perovskite oxide: Performance and mechanism

ABO₃-type perovskite oxides have been regarded as a kind of potential catalyst for peroxymonosulfate (PMS) activation. But some limitations such as specific pH conditions and coexisting ion interference restrict its practical application. Herein, a lanthanum copper Ruddlesden-Popper perovskite oxide (La₂CuO₄) was successfully synthesized through the sol-gel process and applied in the activation of PMS. And for the first time the La₂CuO₄/PMS system was used for tetracycline hydrochloride (TC-HCl) degradation. Results showed that La₂CuO₄ was a potential PMS activation catalyst in the removal of antibiotics. At optimized condition (0.2 g/L catalysts, 1 mM PMS, pH₀ 6.9), 96.05% of TC-HCl was removed in 30 min. In experiments of debugging control conditions, over a wide pH range of 3-11, more than 90% of TC-HCl can be removed. In the natural water treatment process, TC-HCl removal rates of about 84.2% and 70.3% were obtained in tap water and River water, respectively. According to the reusability and stability tests and the results of FTIR and XPS analysis, La₂CuO₄ had high structural and chemical stability. Electron paramagnetic resonance (EPR) suggested that the active species including ·OH, SO₄^-· and ¹O₂ were detected in degradation reaction. Finally, reasonable reaction mechanisms and possible degradation pathways of TC-HCl were proposed. These results indicate that La₂CuO₄ can act as a potential catalyst for PMS activation to degrade TC-HCl in water.

Experimental and theoretical investigation on degradation of dimethyl trisulfide by ultraviolet/peroxymonosulfate: Reaction mechanism and influencing factors

With a large amount of domestic sewage and industrial wastewater discharged into the water bodies, sulfur-containing organic matter in wastewater produced volatile organic sulfide, such as dimethyl trisulfide (DMTS) through microorganisms, caused the potential danger of drinking water safety and human health. At present, there is still a lack of technology on the removal of DMTS. In this study, the ultraviolet/peroxymonosulfate (UV/PMS) advanced oxidation processes was used to explore the degradation of DMTS. More than 90% of DMTS (30 µg/L) was removed under the conditions of the concentration ratio of DMTS to PMS was 3:40, the temperature (T) was 25 ± 2℃, and 10 min of irradiation by a 200 W mercury lamp (365 nm). The kinetics rate constant k of DMTS reacting with hydroxyl radical (HO·) was determined to be 0.2477 min^-1. Mn²⁺, Cu²⁺ and NO₃^- promoted the degradation of DMTS, whereas humic acid and Cl^- in high concentrations inhibited the degradation process. Gas chromatography-mass spectrometry was used to analyze the degradation products and the degradation intermediates were dimethyl disulfide and methanethiol. Density functional theory was used to predict the possible degradation mechanism according to the frontier orbital theory and the bond breaking mechanism of organic compounds. The results showed that the SS, CS and CH bonds in DMTS molecular structure were prone to fracture in the presence of free radicals, resulting in the formation of alkyl radicals and sulfur-containing radicals, which randomly combined to generate a variety of degradation products.

In-situ preparation of yeast-supported Fe0@Fe2O3 as peroxymonosulfate activator for enhanced degradation of tetracycline hydrochloride

Nano zero-valent iron (nZVI) is extensively used as a peroxymonosulfate (PMS) activator but suffers from the ease of oxidation and agglomeration due to its high surface energy and inherent magnetism. Here, green and sustainable yeast was selected as a support material to firstly in-situ prepare yeast-supported Fe⁰@Fe₂O₃ and used for activating PMS to degrade tetracycline hydrochloride (TCH), one of the common antibiotics. Due to the anti-oxidation ability of the Fe₂O₃ shell and the support effect of yeast, the prepared Fe⁰@Fe₂O₃/YC exhibited a superior catalytic activity for the removal of TCH as well as some other typical refractory contaminants. The chemical quenching experiments and EPR results demonstrated SO₄^•- was the main reactive oxygen species while O₂^•-, ¹O₂ and ^•OH played a minor role. Importantly, the crucial role of the Fe²⁺/Fe³⁺ cycle promoted by the Fe⁰ core and surface iron hydroxyl species in PMS activation was elucidated in detail. The TCH degradation pathways were proposed by LC-MS and density functional theory (DFT) calculation. In addition, the outstanding magnetic separation property, anti-oxidation ability, and high environmental resistance of the catalyst were demonstrated. Our work may inspire the development of green, efficient, and robust nZVI-based materials for wastewater treatment.

Activation persulfate for efficient tetrabromobisphenol A degradation via carbon-based materials: Synergistic mechanism of doped N and Fe

In this study, a novel carbon-based material (Fe-N-PGWBC) utilizing the garden waste, melamine and FeSO₄ as the precursor was successfully synthesized, efficiently activating peroxydisulfate (PDS) to degrade tetrabromobisphenol A (TBBPA). Under typical conditions (Fe-N-PGWBC dose of 100 mg·L^-1, PDS of 0.2 mM and TBBPA of 10 mg·L^-1), Fe-N-PGWBC/PDS system could achieve over 99% TBBPA removal (including adsorption and degradation) within 60 min, and the corresponding rate constant k_s was 0.0724 min^-1, which was almost 40.2 times higher than that of the pristine biochar. The extraction experiments implied that the excellent adsorption performance of Fe-N-PGWBC did not hinder the degradation of TBBPA. Abundant active sites (rich oxygen-containing functional groups, Fe-O and Fe₃C) of Fe-N-PGWBC could effectively promote PDS decomposition to produce reactive oxygen species. The probe-based kinetic modelling methods verified that approximately 87.6% TBBPA was degraded by SO₄^·-, 12.2% TBBPA was degraded by ¹O₂, and 0.2% TBBPA was degraded by ^·OH. Furthermore, based on the calculation of density functional theory and identification of products, TBBPA was mainly involved in three transformation pathways including hydroxylation, debromination and β-scission process. The study proposed a facile resource approach of garden waste and provided deeper understanding for the TBBPA degradation mechanisms in heterogeneous system.

Mechanism and security of UV driven sodium percarbonate for sulfamethoxazole degradation using DFT and metabolomic analysis

Recently, sodium percarbonate (SPC) as a solid substitute for H₂O₂ has aroused extensive attention in advanced oxidation processes. In current work, the degradation kinetics and mechanisms of antibiotic sulfamethoxazole (SMX) by ultraviolet (UV) driven SPC system were explored. The removal efficiency of SMX was enhanced as the increasing dosage of SPC. Moreover, hydroxyl radical (•OH), carbonate radical (CO₃^•-) and superoxide radical (O₂^•-) were verified to be presented by scavenger experiments and •OH, CO₃^•- exhibited a significant role in SMX degradation. Reactions mediated by these radicals were affected by anions and natural organic matters, implying that an incomplete mineralization of SMX would be ubiquitous. The screening four intermediates and transformation patterns of SMX were verified by DFT analysis. Metabolomic analysis demonstrated that a decreasing negative effect in E. coli after 24 h exposure was induced by intermediates products. In detail, SMX interfered in some key functional metabolic pathways including carbohydrate metabolism, pentose and glucuronate metabolism, nucleotide metabolism, arginine and proline metabolism, sphingolipid metabolism, which were mitigated after UV/SPC oxidation treatment, suggesting a declining environmental risk of SMX. This work provided new insights into biological impacts of SMX and its transformation products and vital guidance for SMX pollution control using UV/SPC technology.

Application of Deep Eutectic Solvents (DES) for the Synthesis of Iron Heterogeneous Catalyst: Application to Sulfamethoxazole Degradation by Advanced Oxidation Processes

The development of novel approaches to the remotion of pharmaceuticals in wastewater is a subject of concern due to their effect on living beings and the environment. Advanced oxidation processes and the use of relevant catalysts are feasible treatment alternatives that require further development. The development of suitable heterogeneous catalysts is a necessity. This work proposes the synthesis of an iron catalyst in a deep eutectic solvent (Fe-DES) composed of choline chloride and citric acid, which was physically and chemically characterized using SEM-EDS and TEM, FTIR, RAMAN, XRD and XPS. The characterisation confirmed the presence of iron in the form of hematite. Fe-DES was shown to be a multipurpose catalyst that can be applied in the removal of sulfamethoxazole as a reagent in the Fenton and electro-Fenton processes and as an activator of peroxymonosulfate (PMS) processes. After testing the catalyst with the aforementioned techniques, the best result was achieved by combining these processes in an electro-PMS, with great efficiency achieved by dual activation of the PMS with the catalyst and electric field, attaining total elimination at natural pH in 90 min. Furthermore, the degradation was confirmed by the detection of short-chain carboxylic acids (oxalic, succinic, and acetic) and reduction in toxicity values. These results confirm the suitability of Fe-DES to degrade high-priority pharmaceutical compounds.

Selective production of singlet oxygen for harmful cyanobacteria inactivation and cyanotoxins degradation: Efficiency and mechanisms

Knowledge about the impact of singlet oxygen (¹O₂) on the characteristics and inactivation of harmful cyanobacterial organic matter is limited. In this study, the feasibility of using an improved single-iron doped graphite-like phase carbon nitride catalyst (FeCN) to activate peroxymonosulfate (PMS) catalytic production of ¹O₂ to inactivate four harmful cyanobacteria was investigated. The inactivation efficiencies at 30 min were 92.77%, 66.84%, 91.06%, and 93.45% for Microcystis aeruginosa (M. aeruginosa), Nodularia harveyana, Oscillatoria sp., and Nostoc sp., respectively. This was associated with adjusting experimental parameters, such as the FeCN and PMS doses and initial pH, to obtain the maximum ¹O₂ yield. The quenching experiment results and electron paramagnetic resonance spectra showed that ¹O₂ generated via the non-radical pathway might play a dominant role in inactivating harmful cyanobacteria and degrading harmful algal toxins (Microcystin-LR and Nodularin). In addition, the FeCN-PMS system not only effectively destroyed the integrity of harmful cyanobacterial cells but also effectively degraded cyanobacterial toxins, thereby preventing severe secondary contamination by cell rupture. A possible removal mechanism was proposed. This reveals the potential of ¹O₂ to simultaneously inactivate harmful cyanobacteria and degrade harmful cyanobacterial toxins.

The efficient degradation of diclofenac by ferrate and peroxymonosulfate: performances, mechanisms, and toxicity assessment

In this study, the degradation efficiency and reaction mechanisms of diclofenac (DCF), a nonsteroidal anti-inflammatory drug, by the combination of ferrate (Fe(VI) and peroxymonosulfate (PMS) (Fe(VI)/PMS) were systematically investigated. The higher degradation efficiency of DCF in Fe(VI)/PMS system can be obtained than that in alone persulfate (PS), Fe(VI), PMS, or the Fe(VI)/PS process at pH 6.0. DCF was efficiently removed in Fe(VI)/PMS process within a wide range of pH values from 4.0 to 8.0, with higher degradation efficiency in acidic conditions. The increasing reaction temperature (10 to 30 ℃), Fe(VI) dose (6.25 to 100 µM), or PMS concentration (50 to 1000 µM) significantly enhanced the DCF degradation. The existences of HCO₃¯, Cl¯, and humic acid (HA) obviously inhibited the DCF removal. Electron paramagnetic resonance (EPR), free radical quenching, and probing experiments confirmed the existence of sulfate radicals (SO₄^•¯), hydroxyl radicals (^•OH), and Fe(V)/ Fe(IV), which are responsible for DCF degradation in Fe(VI)/PMS system. The variations of TOC removal ratio reveal that the adsorption of organics with ferric particles, formed in the reduction of Fe(VI), also were functioned in the removal process. Sixteen DCF transformation byproducts were identified by UPLC-QTOF/MS, and the toxicity variation was evaluated. Consequently, eight reaction pathways for DCF degradation were proposed. This study provides theoretical basis for the utilization of Fe(VI)/PMS process.

Application of O3/PMS Advanced Oxidation Technology in the Treatment of Organic Pollutants in Highly Concentrated Organic Wastewater: A Review

The ozone/peroxymonosulfate (O3/PMS) system has attracted widespread attention from researchers owing to its ability to produce hydroxyl radicals (•OH) and sulfate radicals (SO4•−) simultaneously. The existing research has shown that the O3/PMS system significantly degrades refinery trace organic compounds (TrOCs) in highly concentrated organic wastewater. However, there is still a lack of systematic understanding of the O3/PMS system, which has created a significant loophole in its application in the treatment of highly concentrated organic wastewater. Hence, this paper reviewed the specific degradation effect, toxicity change, reaction mechanism, various influencing factors and the cause of oxidation byproducts (OBPs) of various TrOCs when the O3/PMS system is applied to the degradation of highly concentrated organic wastewater. In addition, the effects of different reaction conditions on the O3/PMS system were comprehensively evaluated. Furthermore, given the limited understanding of the O3/PMS system in the degradation of TrOCs and the formation of OBPs, an outlook on potential future research was presented. Finally, this paper comprehensively evaluated the degradation of TrOCs in highly concentrated organic wastewater by the O3/PMS system, filling the gaps in scale research, operation cost, sustainability and overall feasibility.

Degradation of phenolic pollutants by persulfate-based advanced oxidation processes: metal and carbon-based catalysis

Wastewater recycling is a solution to address the global water shortage. Phenols are major pollutants in wastewater, and they are toxic even at very low concentrations. Advanced oxidation process (AOP) is an emerging technique for the effective degradation and mineralization of phenols into water. Herein, we aim at giving an insight into the current state of the art in persulfate-based AOP for the oxidation of phenols using metal/metal-oxide and carbon-based materials. Special attention has been paid to the design strategies of high-performance catalysts, and their advantages and drawbacks are discussed. Finally, the key challenges that govern the implementation of persulfate-based AOP catalysts in water purification, in terms of cost and environmental friendliness, are summarized and possible solutions are proposed. This work is expected to help the selection of the optimal strategy for treating phenol emissions in real scenarios.

State-of-the-Art on the Sulfate Radical-Advanced Oxidation Coupled with Nanomaterials: Biological and Environmental Applications

Sulfate radicals (SO₄^-·) play important biological roles in biomedical and environmental engineering, such as antimicrobial, antitumor, and disinfection. Compared with other common free radicals, it has the advantages of a longer half-life and higher oxidation potential, which could bring unexpected effects. These properties have prompted researchers to make great contributions to biology and environmental engineering by exploiting their properties. Peroxymonosulfate (PMS) and peroxydisulfate (PDS) are the main raw materials for SO₄^-· formation. Due to the remarkable progress in nanotechnology, a large number of nanomaterials have been explored that can efficiently activate PMS/PDS, which have been used to generate SO₄^-· for biological applications. Based on the superior properties and application potential of SO₄^-·, it is of great significance to review its chemical mechanism, biological effect, and application field. Therefore, in this review, we summarize the latest design of nanomaterials that can effectually activate PMS/PDS to create SO₄^-·, including metal-based nanomaterials, metal-free nanomaterials, and nanocomposites. Furthermore, we discuss the underlying mechanism of the activation of PMS/PDS using these nanomaterials and the application of SO₄^-· in the fields of environmental remediation and biomedicine, liberating the application potential of SO₄^-·. Finally, this review provides the existing problems and prospects of nanomaterials being used to generate SO₄^-· in the future, providing new ideas and possibilities for the development of biomedicine and environmental remediation.

Efficient chlorinated alkanes degradation in soil by combining alkali hydrolysis with thermally activated persulfate

Alkali activation is the most commonly used activation method for persulfate (PS) in in-situ remediation. However, the role of alkali in pollutant degradation is still elusive, limiting the optimization of relevant remediation strategies. In this study, we found that chlorinated alkanes (e.g., tetrachloroethane (TeCA)) could be efficiently degraded by thermal-alkali activation of PS. The main role of alkali was not activating PS but hydrolyzing the chlorinated alkanes, which was evidenced by the immediate conversion of TeCA into trichloroethylene (TCE) with NaOH and PS or with sole NaOH solution. Electron paramagnetic resonance analysis also showed that with a high NaOH/PS molar ratio (4:1) the intensity of oxidative radicals decreased, implying that high levels of alkali did not favor the formation of free radicals. Interestingly, better degradation of TeCA and its product TCE was observed by the combination of alkaline hydrolysis and thermal activation of PS (where alkali was added 6 h before PS rather than simultaneously) in comparison to thermal-alkali activation of PS. This study provides new insights into the remediation of chlorinated alkane-contaminated soils by in-situ chemical oxidation.

Nano- and micro-scale zerovalent iron-activated peroxydisulfate for methyl phenyl sulfoxide probe transformation in aerobic water: Quantifying the relative roles of SO4·-, Fe(IV), and ·OH

Multiple reactive intermediates have been proposed to be involved in peroxydisulfate (PDS) activation by zerovalent iron (ZVI), including sulfate radical (SO₄^·-) produced via iron-oxide shell mediated electron transfer, ferryl ion species (Fe(IV)) formed from Fe(II)-PDS interaction, and hydroxyl radical (^·OH) generated by ZVI aerobic oxygenation. In this study, evolution of the relative role of these intermediates in microscale and nanoscale ZVI (mZVI vs. nZVI) activated PDS processes is comparatively investigated by using a methyl phenyl sulfoxide (PMSO) probe that selectively reacts with Fe(IV) to produce methyl phenyl sulfone (PMSO₂). Interestingly, during PMSO transformation by mZVI/PDS process, yields of PMSO₂ (η(PMSO₂)) exhibit three-stage behavior that they first increase to a maximum (∼80% but lower than 100%) (Stage I) and then plateau for a period (Stage II) followed by a decrease phase (Stage III). Accordingly, the relative role of Fe(IV) in PMSO transformation is unceasingly improved in Stage I and subsequently reaches equilibrium with that of free radicals in Stage II, while it finally decreases in Stage III. Similar η(PMSO₂) evolution trends are obtained in nZVI/PDS process, except that the η(PMSO₂) increase in Stage I is negligible, possibly due to the exceptional fast nZVI dissolution. It was further clarified by tert-butyl alcohol scavenging assay that, in addition to Fe(IV), the free radical involved in Stages I and II is SO₄^·-, while ^·OH was dominant in Stage III. Moreover, studies on O₂ effect reveal that ZVI aerobic oxygenation participates in mZVI corrosion during the entire process, while it is only involved in nZVI corrosion when PDS content is reduced to a low concentration, indicating that the reactivities of PDS and O₂ are similar in mZVI corrosion, but differ greatly in nZVI corrosion. Additionally, effects of reactant dose and pH on η(PMSO₂) evolution are also explored. Dynamics of the relative role of different reactive oxidants should be taken into account in further applications of ZVI/PDS in situ chemical remediation technology considering their different chemistries.

3D-printed heterogeneous Cu2O monoliths: Reusable supports for Antibiotic Treatmentantibiotic treatment of wastewater

In this study, surfactant stabilized dispersions of the Cu₂O microparticles in a commercially available photocurable resin were 3D printed into both porous and non-porous monoliths, and the heterogeneous Cu₂O catalytic monolith with improved mass transfer characteristics was applied for antibiotic wastewater treatment. The physicochemical properties of catalytic monoliths were characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and thermogravimetric. Ten intermediates were analyzed and identified by GC-MS, and the corresponding degradation pathways were proposed. Both numerical simulation and degradation experiments were used to explore the mass transfer mechanism and catalytic performance of the monoliths. The results showed that the 3D-printed monolith with a well-defined porous network exhibited a high ofloxacin degradation efficiency (100%) based on the sulfate radical-based advanced oxidation processes. In addition, the catalytic monolith showed sustained high activity over 7 reusable cycles demonstrating its feasibility in removal of antibiotics from wastewater.

Sulfate radical based advanced oxidation processes for agro-industrial effluents treatment: A comparative review with Fenton's peroxidation

Agro-industrial wastewater management becomes a major task while environmental regulations are becoming stricter worldwide. Agro-industrial wastewaters are known by high content of organic pollutants that cause an adverse effect on the water bodies. Industries are looking for efficient, easy-to-use and affordable treatment processes. Sulfate radical based advanced oxidation processes (S-AOPs) are arising as suitable alternatives for agro-industrial effluents treatment. In this review, the major findings regarding the application of this technology for real agro-industrial wastewater depuration are discussed. Moreover, these technologies are compared as an alternative to Fenton's process, which is a widely studied advanced oxidation process and with high efficiency in the treatment of agro-industrial effluents. The studies already carried out are promising, but there is still a great lack of studies in this area and using this technique.

Boron regulates catalytic sites of biochar to enhance the formation of surface-confined complex for improved peroxydisulfate activation

Biochar has been developed to activate persulfate for wastewater treatment due to its carbon essence, easily-available and low-cost. Efficiently active sites and interfacial electron transfer are highly desired for peroxydisulfate (PDS) activation. In this study, boronic ester structure and defect degree of boron-doped biochar are confirmed as activate sites to improve PDS activation. The performance of pollutants degradation is proven to have structure-activity relationships with both activate sites. Moreover, boron-doped biochar exhibits higher stability and oxidation potential by forming the surface-confined complex, promoting electron transfer from pollutants to complex. The optimized boron-doped biochar has the advantages of adapting to a broad pH range (2.9-10.0), strong resistance to Cl^- and organic matters, a low activation energy of 11.22 kJ mol^-1, and achieving the decomposition of practical dyeing wastewater. Our work provides a promising approach to regulating the interfacial catalytic sites of biochar by doping heteroatom for PDS activation in practical wastewater treatment.

Efficient Separation and Recovery of Petroleum Hydrocarbon from Oily Sludge by a Combination of Adsorption and Demulsification

The treatment of oily sludge (OS) can not only effectively solve environmental pollution but also contribute to the efficient use of energy. In this study, the separation effect of OS was analyzed through sodium lignosulfonate (SL)-assisted sodium persulfate (S/D) treatment. The effects of SL concentration, pH, temperature, solid–liquid ratio, revolving speed, and time on SL adsorption solubilization were analyzed. The effects of sodium persulfate dosage, demulsification temperature, and demulsification time on sodium persulfate oxidative demulsification were analyzed. The oil removal efficiency was as high as 91.28%. The results showed that the sediment was uniformly and finely distributed in the S/D-treated OS. The contact angle of the sediment surface was 40°, and the initial apparent viscosity of the OS was 56 Pa·s. First, the saturated hydrocarbons and aromatic hydrocarbons on the sediment surface were adsorbed by the monolayer adsorption on SL. Stubborn, cohesive oil agglomerates were dissociated. Sulfate radical anion (SO₄⁻·) with a high oxidation potential, was formed from sodium persulfate. The oxidation reaction occurred between SO₄⁻· and polycyclic aromatic hydrocarbons. A good three-phase separation effect was attained. The oil recovery reached 89.65%. This provides theoretical support for the efficient clean separation of oily sludge.

MoS2 boosts the Fe2+/PMS process for carbamazepine degradation

Activation of peroxymonosulfate (PMS) by Fe²⁺ is a green oxidation process for degradation of organic contaminants. However, the formation of iron mud and low PMS utilization lead to the decreased oxidation efficiency. In this work, commercial MoS₂ particles were used as the catalyst for boosting the Fe²⁺/PMS process for carbamazepine (CBZ) removal. The CBZ removal efficiency by the MoS₂/Fe²⁺/PMS process was significantly enhanced, increasing to 6.5 times that of the Fe²⁺/PMS process. The Fe³⁺ was reduced to Fe²⁺ by the exposed Mo⁴⁺ on the surface of MoS₂, leading to the enhanced PMS utilization rate and increased Fe²⁺ concentration. The relative intensity of DMPO-HO• and DMPO- SO₄^-• followed the order of MoS₂/PMS < Fe²⁺/PMS < MoS₂/Fe²⁺/PMS, also suggesting the enhanced oxidation activity with the addition of MoS₂ in the process of Fe²⁺/PMS. The commercial MoS₂ had good stability shown by the CBZ removal efficiency remaining almost unchanged during 8-time cycling use. Finally, a possible CBZ degradation pathway was proposed for helping understand the oxidation mechanism of the MoS₂/Fe²⁺/PMS process.

Activation of peroxymonosulfate by α-MnO2 for Orange Ⅰ removal in water

Developing high-efficiency catalysts for peroxymonosulfate (PMS)-based advanced oxidation processes is important for eliminating pollutants in water. Herein, α-MnO₂ with major exposed {110} and {100} facets prepared via a hydrothermal method were used as catalysts to activate PMS for the degradation of Orange Ⅰ (OⅠ). α-MnO₂-100, with more abundant surface hydroxyl groups and greater reductive ability, performed remarkably better than α-MnO₂-110 for degrading OⅠ. OⅠ removal of 86.20% was obtained in the α-MnO₂-100/PMS system. The apparent rate constant of OⅠ removal over α-MnO₂-100 was 2.11 times higher than that of α-MnO₂-110. The effects of PMS concentration, catalyst dosage, OⅠ concentration, initial pH, anions and humic acid (HA) on OⅠ degradation in the α-MnO₂-100/PMS system were systematically investigated. Quenching experiments and electron paramagnetic resonance (EPR) demonstrated that SO₄^•-, •OH, O₂^•- and ¹O₂ were the reactive oxygen species (ROS) in the α-MnO₂-100/PMS system. Moreover, the possible degradation pathway of OⅠ in the α-MnO₂-100/PMS system was proposed. This work provides an ideal metal oxide catalyst for sewage remediation.

Activation of peroxymonosulfate by a floating oxygen vacancies - CuFe2O4 photocatalyst under visible light for efficient degradation of sulfamethazine

In this study, expanded perlite supported oxygen vacancies-CuFe₂O₄ (OVs-CFEp) was synthesized via a simple method and utilized as floating catalyst to activate peroxymonosulfate (PMS) for the removal of sulfamethazine (SMT) under visible light irradiation. OVs-CFEp/Vis/PMS synergy presents much superior performance than that of OVs-CFEp/Vis system and OVs-CFEp/PMS system. PMS was efficiently activated by OVs-CFEp at a wide range of pH values, while the degrading rate of SMT was up to 95% in OVs-CFEp/Vis/PMS system. Oxygen vacancies and ·O₂^- accelerated the conversion of Fe(III)/Fe(II) and Cu(I)/Cu(II). The combination of the floating loader boosted light absorption capacity and sufficiently prevented metal ions leaching, which was all beneficial to enhance catalytic performance and recyclability. Besides, the reactive oxygen species were investigated systematically, proving that visible light and OVs-CFEp could activate PMS to produce ·SO₄^-, ·OH, O₂·^-, and ¹O₂ reactive species. Furthermore, based on intermediates identification and Density Functional Theory (DFT) calculation, three types and seven main degradation pathways involving cleavage of bond, SMT molecular rearrangement, and hydroxylation reaction were proposed. So this high photo-absorbing catalyst coupling with advanced oxidation progress was promising for extensive environmental remediation.