Selenium contamination, consequences and remediation techniques in water and soils: A review

Synergistic effects of selenium and zinc on Bletilla striata (Thunb.) Reichb. F. growth and polysaccharide antioxidation

Selenium (Se) is a beneficial trace element for plants, while zinc (Zn) is a vital micronutrient. Bletilla striata (Thunb.) Reichb. F. is widely recognized as a medicinal herb. In this study, Se and Zn were introduced to determine the medicinal properties of B. striata. The plant's biomass, polysaccharides, Se and Zn contents, and the antioxidant properties of polysaccharide solutions were all examined. A notable increase in polysaccharide synthesis in B. striata tubers was observed following the application of 0.2 kg ha-1 of Se, and 1.0 kg ha-1 of Zn, either individually or in combination. Se and Zn content in polysaccharides were 3.33 to 3.77 mg kg-1 and 82.82 to 121.78 mg kg-1, at 1.0 kg ha-1 Se and 10.0 kg ha-1 Zn treatments, respectively. These values were 2.1-3.1 times and 1.8-2.8 times higher than those observed in control samples. Polysaccharide antioxidation has resulted in an increase in antioxidant activity as the concentration of polysaccharide solutions increased. The largest scavenging of 1, 1-diphenyl-2-picrylhydrazyl (DPPH) radicals and the most excellent reducing power of the polysaccharide solutions were observed when a mixture of Se and Zn was applied at a rate of 1.0 kg ha-1 and 10.0 kg ha-1. The individual application of Se at 1.0 kg ha-1 and Zn at 10.0 kg ha-1 also resulted in significant DPPH radicals scavenging and reduced power. These data suggested that Se-Zn enriched B. striata is a new source of Se and Zn supplementation and an antioxidant resource.

Phytoremediation: a transgenic perspective in omics era

Phytoremediation is an environmental safety strategy that might serve as a viable preventative approach to reduce soil contamination in a cost-effective manner. Using plants to remediate pollution from the environment is referred to as phytoremediation. In the past few decades, plants have undergone genetic manipulation to overcome inherent limitations by using genetically modified plants. This review illustrates the eco-friendly process of cleaning the environment using transgenic strategies combined with omics technologies. Herbicides tolerance and phytoremediation abilities have been established in genetically modified plants. Transgenic plants have eliminated the pesticides atrazine and metolachlor from the soil. To expand the application of genetically engineered plants for phytoremediation process, it is essential to test strategies in the field and have contingency planning. Omics techniques were used for understanding various genetic, hormonal, and metabolic pathways responsible for phytoremediation in soil. Transcriptomics and metabolomics provide useful information as resources to understand the mechanisms behind phytoremediation. This review aims to highlight the integration of transgenic strategies and omics technologies to enhance phytoremediation efficiency, emphasizing the need for field testing and comprehensive planning for successful implementation.

Metal-sulfide/polysulfide functionalized layered double hydroxides - recent progress in the removal of heavy metal ions and oxoanionic species from aqueous solutions

Water constitutes an indispensable resource for global life but remains susceptible to pollution from diverse human activities. To mitigate this issue, researchers are committed to purifying water using a variety of materials to remove harmful chemicals, such as heavy metals. Layered double hydroxides (LDHs), with their intriguing, layered structure and chemical behavior, have attained substantial attention for their effectiveness in removing heavy metal cations and various inorganic oxoanions from water. To enhance the efficiency, considerable endeavors have focused on functionalizing LDHs with different chemical species. Intercalation with metal sulfides has proven to be particularly effective, facilitating heavy metal absorption through multiple mechanisms, including ion-exchange, reductive precipitation, and surface sorption. This review concentrates on the synthesis and performance of polysulfide (Sx, x = 2-5), Mo-S, and Sn-S anion intercalated LDHs for heavy metal cations and inorganic oxoanion sorption, along with their mechanisms. Furthermore, the discussion includes prospects for expanding the chemistry of metal sulfide intercalated LDHs, with existing challenges and future outlooks.

Molybdenum-Oxysulfide-Functionalized MgAl-Layered Double Hydroxides─A Sorbent for Selenium Oxoanions

Effective removal of chemically toxic selenium oxoanions at high-capacity and trace levels from contaminated water remains a challenge in current scientific pursuits. Here, we report the functionalization of the MgAl layered double hydroxide with molybdenum-oxysulfide (MoO2S2) anion, referred to as LDH-MoO2S2, and its potential to sequester SeVIO42- and SeIVO32- from aqueous solution. LDH-MoO2S2 nanosheets were synthesized by an ion exchange method in solution. Synchrotron X-ray pair distribution function (PDF) and extended X-ray absorption fine structure (EXAFS) revealed an unexpected transformation of the MoO2S22- to Mo2O2S62- like species during the intercalation process. LDH-MoO2S2 is remarkably efficient in removing SeO42- and SeO32- ions from the ppm to trace level (≤10 ppb), with distribution constant (Kd) ranging from 104 to 105 mL/g. This material showed exceptionally high sorption capacities of 237 and 358 mg/g for SeO42- and SeO32-, respectively. Furthermore, LDH-MoO2S2 demonstrates substantial affinity and efficiency to remove SeO32-/SeO42- even in the presence of competitive ions from contaminated water. Hence, the removal of selenium (VI/IV) oxoanions collectively occurs through reductive precipitation and ion exchange mechanisms. This work provides significant insights into the chemical structure of the MoO2S2 anion into LDH and emphasizes its exceptional potential for high-capacity selenium removal and positioning it as a premier sorbent for selenium oxoanions.

Se-Pair Search for Deciphering Selenium-Encoded Peptide and a Pyrolysis-Thermolysis Dietary Model for Minimizing Loss of "KKSe(M)R" during Processing

Dietary deficiency of selenium is a global health hazard. Supplementation of organic selenopeptides via food crops is a relatively safe approach. Selenopeptides with heterogeneous selenium-encoded isotopes or a poorly fragmented peptide backbone remain unidentified in site-specific selenoproteomic analysis. Herein, we developed the Se-Pair Search, a UniProtKB-FASTA-independent peptide-matching strategy, exploiting the fragmentation patterns of shared peptide backbones in selenopeptides to optimize spectral interpretation, along with developing new selenosite assignment schemes (steps 1-3) to standardize selenium-localization data reporting for the selenoproteome community and thereby facilitating the discovery of unexpected selenopeptides. Using selenium-biofortified rice under cooking, fermentation, and high-temperature and high-pressure processing conditions as a pyrolysis-thermolysis dietary model, we probed the single-molecule-level kinetic evolution of the novel selenopeptide "KKSe(M)R" with qual-quantitative information on graph-theory-oriented localization calculations, abundance patterns, activation energy, and rate constants at a selenoproteome-wide scale. We ground-truth-annotated thirteen pyrolysis-thermolysis products and inferred four pyrolysis-thermolysis pathways to characterize the formation reactivity of the main intermediate variables of KKSe(M)R and constructed an advanced probe-type ultrasound technique prior to pyrolysis-thermolysis conditions for minimizing loss of KKSe(M)R during processing. Importantly, we reveal the unappreciated pyro-excitation diversion of KKSe(M)R at pyrolysis-thermolysis time and temperature matrices. These findings provide pioneering theoretical guidance for controlling dietary selenium supplementation within the safety thresholds.

Fertilizer application alters cadmium and selenium bioavailability in soil-rice system with high geological background levels

The co-occurrence of cadmium (Cd) pollution and selenium (Se) deficiency commonly exists in global soils, especially in China. As a result, there is great interest in developing practical agronomic strategies to simultaneously achieve Cd remediation and Se mobilization in paddy soils, thereby enhancing food quality/safety. To this end, we conducted a field-plot trial on soils having high geological background levels of Cd (0.67 mg kg-1) and Se (0.50 mg kg-1). We explored 12 contrasting fertilizers (urea, potassium sulfate (K2SO4), calcium-magnesium-phosphate (CMP)), amendments (manure and biochar) and their combinations on Cd/Se bioavailability. Soil pH, total organic carbon (TOC), soil available Cd/Se, Cd/Se fractions and Cd/Se accumulation in different rice components were determined. No significant differences existed in mean grain yield among treatments. Results showed that application of urea and K2SO4 decreased soil pH, whereas the CMP fertilizer and biochar treatments increased soil pH. There were no significant changes in TOC concentrations. Three treatments (CMP, manure, biochar) significantly decreased soil available Cd, whereas no treatment affected soil available Se at the maturity stage. Four treatments (CMP, manure, biochar and manure＋urea＋CMP＋K2SO4) achieved our dual goal of Cd reduction and Se enrichment in rice grain. Structural equation modeling (SEM) demonstrated that soil available Cd and root Cd were negatively affected by pH and organic matter (OM), whereas soil available Se was positively affected by pH. Moreover, redundancy analysis (RDA) showed strong positive correlations between soil available Cd, exchangeable Cd and reducible Cd with grain Cd concentration, as well as between pH and soil available Se with grain Se concentration. Further, there was a strong negative correlation between residual Cd/Se (non-available fraction) and grain Cd/Se concentrations. Overall, this study identified the primary factors affecting Cd/Se bioavailability, thereby providing new guidance for achieving safe production of Se-enriched rice through fertilizer/amendment management of Cd-enriched soils.

Stratum affects the distribution of soil selenium bioavailability by modulating the soil physicochemical properties: A case study in a Se-enriched area, China

The soil selenium (Se) content and bioavailability are important for human health. In this regard, knowing the factors driving the concentration of total Se and bioavailable Se in soils is essential to map Se, enhance foodstuffs' Se content, and improve the Se nutritional status of humans. In this study, total Se and Se bioavailability (i.e., phosphate extracted Se) in surface soils (0-20 cm) developed on different strata were analyzed in a Se-enriched region of Southwest China. Furthermore, the interaction between the stratum and soil properties was assessed and how did the stratum effect on the concentration and spatial distribution of Se bioavailability in soils was investigated. Results showed that the median concentration of total Se in soils was 0.308 mg/kg, which is higher than China's soil background. The mean proportion of phosphate extracted Se in total Se was 12.2 %. The values of total Se, phosphate extracted Se, and soil organic matter (SOM) in soils increased with the increasing stratum age. In contrast, the coefficient of weathering and eluviation (BA) values decreased. The analysis of statistics and Geodetector revealed that the SOM, stratum, and BA were the dominant controlling factors for the contents and distributions of soil total Se and phosphate extracted Se. This study provided strong evidence that the soil properties that affected the total Se and Se bioavailability were modulated by the local geological background, and had important practical implications for addressing Se malnutrition and developing the Se-rich resource in the study region and similar geological settings in different parts of the globe.

Methyl jasmonate improves selenium tolerance via regulating ROS signalling, hormonal crosstalk and phenylpropanoid pathway in Plantago ovata

Selenium (Se) toxicity is an emerging contaminant of global concern. It is known to cause oxidative stress, affecting plant growth and yield. Plantago ovata, a major cash crop known for its medicinal properties, is often cultivated in Se-contaminated soil. Thus, the aim of this study was to evaluate the use of methyl jasmonate (MeJA) seed priming technique to mitigate Se-induced phytotoxicity. The results demonstrated that Se stress inhibited P. ovata growth, biomass and lowered chlorophyll content in a dose-dependent manner. Treatment with 1 μM MeJA enhanced the antioxidant defence system via ROS signalling and upregulated key enzymes of phenylpropanoid pathway, PAL (1.9 times) and CHI (5.4 times) in comparison to control. Caffeic acid, Vanillic acid, Chlorogenic acid, Coumaric acid and Luteoloside were the most abundant polyphenols. Enzymatic antioxidants involved in ROS scavenging, such as CAT (up to 1.3 times) and GPOX (up to 1.4 times) were raised, while SOD (by 0.6 times) was reduced. There was an upregulation of growth-inducible hormones, IAA (up to 2.1 fold) and GA (up to 1.5 fold) whereas, the stress-responsive hormones ABA (by 0.6 fold) and SA (by 0.5 fold) were downregulated. The alleviation of Se toxicity was also evident from the decrease in H2O2 and MDA contents under MeJA treatment. These findings suggest that MeJA can effectively improve Se tolerance and nutraceutical value in P. ovata by modulating the phytohormone regulatory network, redox homeostasis and elicits accumulation of polyphenols. Therefore, MeJA seed priming could be an efficient way to enhance stress resilience and sustainable crop production.

Molecular insights into the bonding mechanisms between selenium and dissolved organic matter

Natural organic matter (NOM) plays a critical role in the mobilization and bioavailability of metals and metalloids in the aquatic environment. Selenium (Se), an environmental contaminant of aquatic systems, has drawn increasing attention over the years. While Se is a vital micronutrient to human beings, animals and plants, excess Se intake may pose serious long-term risks. However, the interaction between Se and dissolved organic matter (DOM) remains relatively unexplored, especially the reaction mechanisms and interactions of specific NOM components of certain molecular weight and the corresponding functional group change. Herein, we report an investigation on the interactions between Se and DOM by focusing on the mass distribution profile change of operationally defined molecular weight fractions of humic acid (HA) and fulvic acid (FA). The results showed that across all molecular weights studied, HA fractions were more prone to enhanced aggregation upon introduction of Se into the system. For FA, the presence of Se species results in aggregation, dissociation, and redox reactions with the first two being the major mechanisms. Total organic carbon analysis (TOC), UV-vis spectroscopy (UV-vis), and Orbitrap MS data showed that [10, 30] kDa MW fraction had the largest aromatic decrease (CRAM-like, lignin-like and tannin-like) upon addition of SeO2 via dissociation as the dominant mechanism. Fourier transform infrared spectroscopy (FT-IR) revealed that Se based bridging or chelation of functional groups from individual DOM components through hydrogen bonding in the form of SeO⋯H and possibly Se⋯H and/or attractive electrostatic interactions lead to aggregated DOM1⋯Se⋯DOM2. It was concluded from two-dimensional correlation analyses of excitation emission matrix (EEM) and FT-IR that the preferred Se-binding follows lipid ➔ peptide ➔ tannin ➔ aromatic functionalities. These results provide new understanding of Se interactions with various NOM components in aquatic environments and provide insight for Se assessing health risk and/or treatment of Se contaminated water.

Spatial distribution and main drivers of soil selenium in Taihu Lake Basin, Southeast China

Selenium (Se) is an essential micronutrient that is both hazardous and beneficial to living organisms. However, few studies have examined soil Se distribution and its driving mechanisms on a large basin scale. Thus, multivariate statistics, geostatistics, boosted regression trees, and structural equation models were used to investigate the spatial distribution, driving factors, and multivariate interactions of soil Se based on 1753 topsoil samples (0-20 cm) from the Taihu Lake Basin. The results indicated that the soil Se concentration ranged from 0.12 to 57.26 mg kg-1, with a mean value of 0.90 mg kg-1. Overall, the spatial pattern of soil Se gradually decreased from south to north with approximately 1.06% of the soil contaminated with Se. Moisture index (MI), soil moisture (SM), and ≥ 0 ℃ accumulative temperature (AAT0) were the main determinants of soil Se accumulation. Additionally, the substantial effect of SM∩AAT0 on soil Se concentrations demonstrated that climate-soil interactions largely governed the spatial pattern of soil Se. The Se-enriched and Se-contaminated soils occurred mainly in regions with high precipitation, MI, SM, AAT0, and soil organic matter. This study provides a theoretical basis and practical guidance for the remediation of soil Se contamination and the sustainable development of Se-enriched agriculture.

One-step novel synthesis of alginate-based SeNPs of cluster beans by reduction of Se(IV) by vitamin C in aqueous media

Alginate powder was applied as stabilizer and capping agent surfactant in green synthesis of SeNPs of cluster shapes for the first time by reduction of Se (IV) with vitamin C. The naked eyes observations noticed a rapid change in color of Se (IV) solution from colorless to bright crimson aggregates as just the solution gets in contact with added mixture of vitamin C and alginate of powder natures then is rapidly turned to a reddish-pink aggregate. The formed aggregate was converted into violet crystals by aging or heating. In absence of vitamin C, addition of alginate powder to Se (IV) electrolyte whilst stirring the mixture leads to the formation of a precipitate of granule grains nature. The FTIR, XRD and SEM and TEM investigations indicated the formation of SeNPs of cluster beans for the crystals and alginate-based Se (IV) complex for the granule grains, respectively. The complex was invested for evaluation the alginate capacity for removal of Se (IV) ions from aqueous solutions and was found to be 63.66 mg/g at 25 °C. Some kinetic runs were performed to gain some information on growth rates of SeNPs formation in terms of electron-transfer pathway in the rate-determining step.

Selenium volatilization in plants, microalgae, and microorganisms

The augmented prevalence of Se (Se) pollution can be attributed to various human activities, such as mining, coal combustion, oil extraction and refining, and agricultural irrigation. Although Se is vital for animals, humans, and microorganisms, excessive concentrations of this element can give rise to potential hazards. Consequently, numerous approaches have been devised to mitigate Se pollution, encompassing physicochemical techniques and bioremediation. The recognition of Se volatilization as a potential strategy for mitigating Se pollution in contaminated environments is underscored in this review. This study delves into the volatilization mechanisms in various organisms, including plants, microalgae, and microorganisms. By assessing the efficacy of Se removal and identifying the rate-limiting steps associated with volatilization, this paper provides insightful recommendations for Se mitigation. Constructed wetlands are a cost-effective and environmentally friendly alternative in the treatment of Se volatilization. The fate, behavior, bioavailability, and toxicity of Se within complex environmental systems are comprehensively reviewed. This knowledge forms the basis for developing management plans that aimed at mitigating Se contamination in wetlands and protecting the associated ecosystems.

A Review of the Occurrence of Metals and Xenobiotics in European Hedgehogs (Erinaceus europaeus)

Monitoring data from several European countries indicate that European hedgehog (Erinaceus europaeus) populations are declining, and research exploring the causes of the decline, including exposure to potentially harmful xenobiotics and metals, may inform conservation initiatives to protect this species in the wild. Hedgehogs are ground-dwelling mammals, feeding on a range of insects, slugs, snails, and earthworms, as well as eggs, live vertebrates, and carrion, including carcasses of apex predator species representing higher levels of the food chain. Consequently, hedgehogs come into close contact with contaminants present in their habitats and prey. This review investigated the studies available on the subject of the occurrence of metals and organic xenobiotics in hedgehogs. This study found that a vast range of different pesticides; persistent organic pollutants (POPs), including organochlorine compounds and brominated flame retardants (BFRs); as well as toxic heavy metals could be detected. Some compounds occurred in lethal concentrations, and some were associated with a potential adverse effect on hedgehog health and survival. Due to their ecology, combined with the opportunity to apply non-invasive sampling techniques using spines as sampling material, we suggest that the European hedgehog is a relevant bioindicator species for monitoring the exposure of terrestrial wildlife to potential toxicants in urban and rural environments.

Simultaneous selenite reduction and nitrogen removal using Paracoccus sp.: Reactor performance, microbial community, and mechanism

Selenium-containing wastewater has a high concentration of nitrogen compounds (ammonia nitrogen [NH4+-N]), leading to water pollution. Thus, the simultaneous reduction of selenium and removal of nitrogen compounds during wastewater treatment has become the top priority. However, the exogenous bacteria that can simultaneously reduce selenite and remove ammonia nitrogen and colonize in the wastewater treatment systems have not been reported. Additionally, the effects and the underlying mechanism of biofortification on the reduction and removal efficiency of the microorganisms remain unclear. In this study, we investigated the simultaneous selenite reduction and nitrogen removal efficiency of Paracoccus sp. (strain SSJ) isolated from selenium-contaminated soil and explored biofortification effects on the composition and structure of the microbial community. Using sequencing biofilm batch reactors (SBBRs), the structural and functional characteristics of the microbial community were systematically compared between the control (group A) and biofortified (group B) groups. Strain SSJ could simultaneously reduce 63.28% of selenite and remove 93.05% of NH4+-N within 24 h. Moreover, no accumulation of nitrate nitrogen (NO3--N) and nitrite nitrogen (NO2--N) was observed in the reaction process. The performance and stability of the SBBRs enhanced by strain SSJ were greatly improved. Illumina sequencing results showed that strain SSJ was surprisingly colonized, and Paracoccus was the predominant genus in group B (relative abundance: 13.93%). Moreover, PICRUSt2 analysis results suggested that the microbial community in group B demonstrated increased rates of ammonia nitrogen removal through ammonia assimilation and selenite reduction through sulfur metabolism and glutathione-mediated selenite reduction pathway. In summary, our findings shed light on the mechanism for simultaneous selenite reduction and nitrogen removal by biofortification and provide novel microbial resources for the treatment of selenite-containing wastewater.

Selenium biofortification improves bioactive composition and antioxidant status in Plantago ovata Forsk., a medicinal plant

BACKGROUND

Selenium (Se) is an essential micronutrient for humans, but its deficiency as well as toxicity affects large number of people worldwide. Plantago ovata, a commercially important medicinal plant, is mainly cultivated in western regions of India, where elevated levels of Se have been found in soil. Thus, we evaluated the potential of Se biofortification in P. ovata via phytoremediation and its effect on the bioactive composition.

RESULTS

The results showed a significant alteration in various morphological and physiological parameters in a dose-dependent manner. The 10 µM Se dose improved seedling height, biomass and total chlorophyll content. There was a gradual increase in total Se content, with highest accumulation of 457.65 µg/g FW at 500 µM Se treatment. Se positively affected the antioxidative metabolism which was measured from the change in total antioxidant capacity, radical scavenging activity and Metallothionein 2 expression. Increasing levels of Se also affected the PAL activity, total polyphenol and flavonoid content. Caffeic acid, Coumaric acid and Rutin were found to be the most abundant phenolic compounds.

CONCLUSIONS

Low levels of selenium (below 50 µM) can successfully improve Se accumulation and elicit production of various polyphenols without hampering plant growth. Thus, Se fortification of P. ovata seedlings via phytoremediation appears to be a feasible and efficient way to enhance its nutraceutical value in dietary products.

Selenite Adsorption and Reduction via Iron(II) Impregnated Activated Carbon Produced from the Phosphoric Acid Activation of Construction Waste Wood

Chemical activation of waste materials, to form activated carbon, (AC) is complicated by the large amounts of chemical activating agents required and wastewater produced. To address these problems, we have developed an optimized process for producing AC, by phosphoric acid activation of construction waste. Waste wood from construction sites was ground and treated with an optimized phosphoric acid digestion and activation that resulted in high surface areas (> 2000 m2/g) and a greater recovery of phosphoric acid. Subsequently the phosphoric acid activated carbon (PAC), was functionalized with iron salts and evaluated for its efficacy on the adsorption of selenite and selenate. Total phosphoric acid recovery was 96.7% for waste wood activated with 25% phosphoric acid at a 1:1 ratio, which is a substantially higher phosphoric acid recovery, than previous literature findings. Post activation impregnation of iron salts resulted in iron(II) species adsorbed to the PAC surface. The iron(II) chloride impregnated AC removed up to 11.41 ± 0.502 mg selenium per g Iron-PAC. Competitive ions such as sulfate and nitrate had little effect on selenium adsorption, however, phosphate concentration did negatively impact the selenium uptake at high phosphate levels. At 250 ppm, approximately 75% of adsorption capacity of both the selenate and the selenite solutions was lost, although selenium was still preferentially adsorbed. Peak adsorption occurred between a pH of 4 and 11, with a complete loss of adsorption at a pH of 13.

Sampling method and season influence selenium dynamics at the base of a boreal lake food chain

Few studies have investigated the potential influence of sampling method and season on Se bioaccumulation at the base of the aquatic food chain. In particular, the effects of low water temperature associated with prolonged ice-cover periods on Se uptake by periphyton and further transfer to benthic macroinvertebrates (BMI) have been overlooked. Such information is crucial to help improve Se modelling and risk assessment at sites receiving continuous Se inputs. To date, this seems to be the first study to address these research questions. Here, we examined potential differences related to sampling methods (artificial substrates vs. grab samples) and seasons (summer vs. winter) on Se dynamics in the benthic food chain of a boreal lake (McClean Lake) receiving continuous low-level Se input from a Saskatchewan uranium milling operation. During summer 2019, water, sediment grab samples and artificial substrates were sampled from 8 sites with varying mill-treated effluent exposure. In winter 2021, water and sediment grab samples were sampled at 4 locations in McClean Lake. Water, sediment, and biological samples were subsequently analyzed for total Se concentrations. Enrichment functions (EF) in periphyton and trophic transfer factors (TTF) in BMI were calculated for both sampling methods and seasons. Periphyton collected with artificial substrates (Hester-Dendy samplers and glass plates) exhibited significantly higher mean Se concentrations (2.4 ± 1.5 μg/g d.w) than periphyton collected from the surface of sediment grab samples (1.1 ± 1.3 μg/g d.w). Selenium concentrations in periphyton sampled in winter (3.5 ± 1.0 μg/g d.w) were significantly greater than summer (1.1 ± 1.3 μg/g d.w). Nevertheless, Se bioaccumulation in BMI was similar between seasons, possibly suggesting that invertebrates are not actively feeding in winter. Further investigations are necessary to verify if peak Se bioaccumulation in BMI takes place in spring, coinciding with the reproductive and developmental windows of some fish species.

Biofortification revisited: Addressing the role of beneficial soil microbes for enhancing trace elements concentration in staple crops

Trace element deficiency is a pervasive issue contributing to malnutrition on a global scale. The primary cause of this hidden hunger is related to low dietary intake of essential trace elements, which is highly prevalent in numerous regions across the world. To address deficiency diseases in humans, fortification of staple crops with vital trace elements has emerged as a viable solution. Current methods for fortifying crops encompass chemical amendments, genetic breeding, and transgenic approaches, yet these approaches possess certain limitations, constraining their agricultural application. In contrast, fortifying staple crops through the utilization of soil-beneficial microbes has emerged as a promising and economically feasible approach to enhance trace element content in crops. A specific subset of these beneficial soil microbes, referred to as plant growth-promoting microbes, have demonstrated their ability to influence the interactions between plants, soil, and minerals. These microbes facilitate the transport of essential soil minerals, such as zinc, iron, and selenium, into plants, offering the potential for the development of tailored bioinoculants that can enhance the nutritional quality of cereals, pulses, and vegetable crops. Nevertheless, further research efforts are necessary to comprehensively understand the molecular mechanisms underlying the uptake, transport, and augmentation of trace element concentrations in staple crops. By delving deeper into these mechanisms, customized bioinoculants of soil-beneficial microbes can be developed to serve as highly effective strategies in combating trace element deficiency and promoting global nutritional well-being.

Effect of Dietary Selenium on the Growth and Immune Systems of Fish

Dietary selenium (Se) is an essential component that supports fish growth and the immune system. This review attempts to provide insight into the biological impacts of dietary Se, including immunological responses, infection defense, and fish species growth, and it also identifies the routes via which it enters the aquatic environment. Dietary Se is important in fish feed due to its additive, antioxidant, and enzyme properties, which aid in various biological processes. However, excessive intake of it may harm aquatic ecosystems and potentially disrupt the food chain. This review explores the diverse natures of dietary Se, their impact on fish species, and the biological methods for eliminating excesses in aquatic environments. Soil has a potential role in the distribution of Se through erosion from agricultural, industrial, and mine sites. The research on dietary Se's effects on fish immune system and growth can provide knowledge regarding fish health, fish farming strategies, and the health of aquatic ecosystems, promoting the feed industry and sustainable aquaculture. This review provides data and references from various research studies on managing Se levels in aquatic ecosystems, promoting fish conservation, and utilizing Se in farmed fish diets.

Thermodynamic insights into selenium oxyanion removal from synthetic flue gas desulfurization wastewater with temperature-swing solvent extraction

Temperature-swing solvent extraction (TSSE) is a cost-effective, simple, versatile, and industry-ready technology platform capable of desalinating hypersaline brines toward zero liquid discharge. In this work, we demonstrate the potential of TSSE in the effective removal of selenium oxyanions and traces of mercury with the coexistence of high contents of chloride and sulfate often encountered in flue gas desulfurization wastewater streams. We compare the rejection performance of the two common solvents broadly used for TSSE, decanoic acid (DA) and diisopropylamine (DPA), and correlate those with the solvent physicochemical properties (e.g., dielectric constant, polarity, molecular bulkiness, and hydrophobicity) and ionic properties (e.g., hydrated radii and H-bonding). The results show that TSSE can remove >99.5% of selenium oxyanions and 96%-99.6% of mercury traces coexisting with sulfate (at a sixfold Se concentration) and chloride (at a 400-fold Se concentration) in a synthetic wastewater stream. Compared to diisopropylamine, decanoic acid is more effective in rejecting ions for all cases, ranging from a simple binary system to more complex multicomponent systems with highly varied ionic concentrations. Furthermore, the H-bonding interaction with water and the hydrated radii of the oxyanions (i.e., selenate vs. selenite) along with the hindrance effects caused by the molecular bulkiness and hydrophobicity (or lipophilicity) of the solvents play important roles in the favorable rejection of TSSE. This study shows that TSSE might provide a technological solution with a high deionization potential for the industry in complying with the Environmental Protection Agency regulations for discharge streams from coal-fired power facilities.

A State-of-the-Science Review on Metal Biomarkers

PURPOSE OF REVIEW

Biomarkers are commonly used in epidemiological studies to assess metals and metalloid exposure and estimate internal dose, as they integrate multiple sources and routes of exposure. Researchers are increasingly using multi-metal panels and innovative statistical methods to understand how exposure to real-world metal mixtures affects human health. Metals have both common and unique sources and routes of exposure, as well as biotransformation and elimination pathways. The development of multi-element analytical technology allows researchers to examine a broad spectrum of metals in their studies; however, their interpretation is complex as they can reflect different windows of exposure and several biomarkers have critical limitations. This review elaborates on more than 500 scientific publications to discuss major sources of exposure, biotransformation and elimination, and biomarkers of exposure and internal dose for 12 metals/metalloids, including 8 non-essential elements (arsenic, barium, cadmium, lead, mercury, nickel, tin, uranium) and 4 essential elements (manganese, molybdenum, selenium, and zinc) commonly used in multi-element analyses.

RECENT FINDINGS

We conclude that not all metal biomarkers are adequate measures of exposure and that understanding the metabolic biotransformation and elimination of metals is key to metal biomarker interpretation. For example, whole blood is a good biomarker of exposure to arsenic, cadmium, lead, mercury, and tin, but it is not a good indicator for barium, nickel, and uranium. For some essential metals, the interpretation of whole blood biomarkers is unclear. Urine is the most commonly used biomarker of exposure across metals but it should not be used to assess lead exposure. Essential metals such as zinc and manganese are tightly regulated by homeostatic processes; thus, elevated levels in urine may reflect body loss and metabolic processes rather than excess exposure. Total urinary arsenic may reflect exposure to both organic and inorganic arsenic, thus, arsenic speciation and adjustment for arsebonetaine are needed in populations with dietary seafood consumption. Hair and nails primarily reflect exposure to organic mercury, except in populations exposed to high levels of inorganic mercury such as in occupational and environmental settings. When selecting biomarkers, it is also critical to consider the exposure window of interest. Most populations are chronically exposed to metals in the low-to-moderate range, yet many biomarkers reflect recent exposures. Toenails are emerging biomarkers in this regard. They are reliable biomarkers of long-term exposure for arsenic, mercury, manganese, and selenium. However, more research is needed to understand the role of nails as a biomarker of exposure to other metals. Similarly, teeth are increasingly used to assess lifelong exposures to several essential and non-essential metals such as lead, including during the prenatal window. As metals epidemiology moves towards embracing a multi-metal/mixtures approach and expanding metal panels to include less commonly studied metals, it is important for researchers to have a strong knowledge base about the metal biomarkers included in their research. This review aims to aid metals researchers in their analysis planning, facilitate sound analytical decision-making, as well as appropriate understanding and interpretation of results.

Selenite Removal from Aqueous Solution Using Silica-Iron Oxide Nanocomposite Adsorbents

In recent years, during industrial development, the expanding discharge of harmful metallic ions from different industrial wastes (such as arsenic, barium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, or zinc) into different water bodies has caused serious concern, with one of the problematic elements being represented by selenium (Se) ions. Selenium represents an essential microelement for human life and plays a vital role in human metabolism. In the human body, this element acts as a powerful antioxidant, being able to reduce the risk of the development of some cancers. Selenium is distributed in the environment in the form of selenate (SeO₄^2-) and selenite (SeO₃^2-), which are the result of natural/anthropogenic activities. Experimental data proved that both forms present some toxicity. In this context, in the last decade, only several studies regarding selenium's removal from aqueous solutions have been conducted. Therefore, in the present study, we aim to use the sol-gel synthesis method to prepare a nanocomposite adsorbent material starting from sodium fluoride, silica, and iron oxide matrices (SiO₂/Fe(acac)₃/NaF), and to further test it for selenite adsorption. After preparation, the adsorbent material was characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The mechanism associated with the selenium adsorption process has been established based on kinetic, thermodynamic, and equilibrium studies. Pseudo second order is the kinetic model that best describes the obtained experimental data. Also, from the intraparticle diffusion study, it was observed that with increasing temperature the value of the diffusion constant, K_diff, also increases. Sips isotherm was found to best describe the experimental data obtained, the maximum adsorption capacity being ~6.00 mg Se(IV) per g of adsorbent material. From a thermodynamic point of view, parameters such as ΔG⁰, ΔH⁰, and ΔS⁰ were evaluated, proving that the process studied is a physical one.

Selenium in soil-plant system: Transport, detoxification and bioremediation

Selenium (Se) is an essential micronutrient for humans and a beneficial element for plants. However, high Se doses always exhibit hazardous effects. Recently, Se toxicity in plant-soil system has received increasing attention. This review will summarize (1) Se concentration in soils and its sources, (2) Se bioavailability in soils and influencing factors, (3) mechanisms on Se uptake and translocation in plants, (4) toxicity and detoxification of Se in plants and (5) strategies to remediate Se pollution. High Se concentration mainly results from wastewater discharge and industrial waste dumping. Selenate (Se [VI]) and selenite (Se [IV]) are the two primary forms absorbed by plants. Soil conditions such as pH, redox potential, organic matter and microorganisms will influence Se bioavailability. In plants, excessive Se will interfere with element uptake, depress photosynthetic pigment biosynthesis, generate oxidative damages and cause genotoxicity. Plants employ a series of strategies to detoxify Se, such as activating antioxidant defense systems and sequestrating excessive Se in the vacuole. In order to alleviate Se toxicity to plants, some strategies can be applied, including phytoremediation, OM remediation, microbial remediation, adsorption technique, chemical reduction technology and exogenous substances (such as Methyl jasmonate, Nitric oxide and Melatonin). This review is expected to expand the knowledge of Se toxicity/detoxicity in soil-plant system and offer valuable insights into soils Se pollution remediation strategies.

Chromosome-level genome and high nitrogen stress response of the widespread and ecologically important wetland plant Typha angustifolia

Typha angustifolia L., known as narrowleaf cattail, is widely distributed in Eurasia but has been introduced to North America. Typha angustifolia is a semi-aquatic, wetland obligate plant that is widely distributed in Eurasia and North America. It is ecologically important for nutrient cycling in wetlands where it occurs and is used in phytoremediation and traditional medicine. In order to construct a high-quality genome for Typha angustifolia and investigate genes in response to high nitrogen stress, we carried out complete genome sequencing and high-nitrogen-stress experiments. We generated a chromosomal-level genome of T. angustifolia, which had 15 pseudochromosomes, a size of 207 Mb, and a contig N50 length of 13.57 Mb. Genome duplication analyses detected no recent whole-genome duplication (WGD) event for T. angustifolia. An analysis of gene family expansion and contraction showed that T. angustifolia gained 1,310 genes and lost 1,426 genes. High-nitrogen-stress experiments showed that a high nitrogen level had a significant inhibitory effect on root growth and differential gene expression analyses using 24 samples found 128 differentially expressed genes (DEGs) between the nitrogen-treated and control groups. DEGs in the roots and leaves were enriched in alanines, aspartate, and glutamate metabolism, nitrogen metabolism, photosynthesis, phenylpropanoid biosynthesis, plant-pathogen interaction, and mitogen-activated protein kinase pathways, among others. This study provides genomic data for a medicinal and ecologically important herb and lays a theoretical foundation for plant-assisted water pollution remediation.

A critical analysis of sources, pollution, and remediation of selenium, an emerging contaminant

Selenium (Se) is an essential metalloid and is categorized as emerging anthropogenic contaminant released to the environment. The rise of Se release into the environment has raised concern about its bioaccumulation, toxicity, and potential to cause serious damages to aquatic and terrestrial ecosystem. Therefore, it is extremely important to monitor Se level in environment on a regular basis. Understanding Se release, anthropogenic sources, and environmental behavior is critical for developing an effective Se containment strategy. The ongoing efforts of Se remediation have mostly emphasized monitoring and remediation as an independent topics of research. However, our paper has integrated both by explaining the attributes of monitoring on effective scale followed by a candid review of widespread technological options available with specific focus on Se removal from environmental media. Another novel approach demonstrated in the article is the presentation of an overwhelming evidence of limitations that various researchers are confronted with to overcome achieving effective remediation. Furthermore, we followed a holistic approach to discuss ways to remediate Se for cleaner environment especially related to introducing weak magnetic field for ZVI reactivity enhancement. We linked this phenomenal process to electrokinetics and presented convincing facts in support of Se remediation, which has led to emerge 'membrane technology', as another viable option for remediation. Hence, an interesting, innovative and future oriented review is presented, which will undoubtedly seek attention from global researchers.

A single functionalized graphene nanocomposite in cross flow module for removal of multiple toxic anionic contaminants from drinking water

Polyether sulfone (PES)-based thin-film nanofiltration (TFN) membranes embedded with ferric hydroxide (Fe^III(OH)_x) functionalized graphene oxide (GO) nanoparticles were fabricated through interfacial polymerization for a generalized application in removal of a plethora of anionic and toxic water contaminants. Following the most relevant characterization, the newly synthesized membranes were fitted in a novel flat sheet cross-flow module, for experimental investigation on purification of live contaminated groundwater collected from different affected areas. The separation performances of the membranes in the flat sheet cross-flow module demonstrated that GOF membranes had higher selectivity for monovalent and divalent salt rejections than pristine GO membranes. Furthermore, both membranes were tested for simultaneously removing widely occurring hazardous ions of heavy metals and metalloids in groundwater, such as arsenic, selenium, chromium, and fluoride. Compared to the pristine GO and the reported membranes in the literature, the GOF membrane exhibited remarkable performance in terms of rejection efficiency (Cr (VI): 97.2%, Se (IV): 96.6%, As(V): 96.3%, F^- 88.4%) and sustained flux of 184 LMH (Lm^-2 h^-1) at an optimum transmembrane pressure of 16 bar. The investigated membrane module equipped with the GOF membrane proved to be a low-cost system with higher anionic rejection and sustained high flux at a comprehensive pH range, as evident over long hours of study vis-à-vis reported systems.

Unlocking the bentonite microbial diversity and its implications in selenium bioreduction and biotransformation: Advances in deep geological repositories

Selenium, ⁷⁹Se, is one of the most critical radionuclides in radioactive waste disposed in future deep geological repositories (DGRs). Here, we investigate the impact of bentonite microbial communities on the allotropic transformation of Se(IV) bioreduction products under DGR relevant conditions. In addition, Se amendment-dependent shifts in the bentonite microbial populations are assessed. Microcosms of water-saturated bentonites were spiked with a bacterial consortium, treated with selenite and incubated anaerobically for six months. A combination of X-Ray Absorption Spectroscopy, Electron Microscopy, and Raman Spectroscopy was used to track the allotropic changes of the Se bioreduction products. Interestingly, the color of bentonite shifted from orange to black in the selenite-treated microcosms. In the orange layers, amorphous or monoclinic Se(0) were identified, whilst black precipitates consisted of stable trigonal Se(0) form. Illumina DNA sequencing indicated the distribution of strains with Se(IV) reducing and Se(0) allotropic biotransformation potential, like Pseudomonas, Stenotrophomonas, Desulfosporosinus, and unclassified-Desulfuromonadaceae. The archaea Methanosarcina decreased its abundance in the presence of Se(IV), probably caused by this oxyanion toxicity. These findings provide an understanding of the bentonite microbial strategies involved in the immobilization of Se(IV) by reduction processes, and prove their implication in the allotropic biotransformation from amorphous to trigonal Se(0) under DGR relevant conditions.

Retention of trace elements in coal-fired flue gas by a novel heterogeneous agglomeration technology

Heterogeneous agglomeration (HA) is a very potential technology for coal-fired flue gas treatment. In this paper, the distribution and migration mechanisms of trace elements (TEs) such as Se, As and Pb in CFPPs were studied on a 30,000 m³/hr pilot-scale experimental platform. The influences of HA on the removal efficiency of gaseous and particulate TEs were well analyzed. The results showed that Se, As and Pb were enriched in fly ash, and their sensitivity to particle size is quite different. The content of Se was the highest in PM₁, reaching 193.04 mg/kg at the electrostatic precipitator (ESP) outlet. The average particle size of the total dust before ESP increased significantly from 21.686 to 62.612 µm after injecting the heterogeneous agglomeration adsorbent, conducive to its further removal by ESP. In addition, the concentrations of gaseous Se, As and Pb in the flue gas decreased after adsorbent spray, and accordingly, their contents in the hierarchical particles increased, indicating that the adsorbent could effectively promote the adsorption of gaseous trace elements in fly ash and reduce the possibility of their escape to the atmosphere. Total concentrations of Se, As and Pb emitted by wet flue gas desulfurization (WFGD) are 0.223, 0.668 and 0.076 µg/m³, which decreased by 59.98%, 47.69% and 90.71%, respectively. Finally, a possible HA mechanism model was proposed, where chemical adsorption, physical condensation and collision agglomeration of gaseous TEs and fine particles with adsorbent droplets occurred to form larger agglomerates.

Highly efficient removal of Se(IV) using reduced graphene oxide-supported nanoscale zero-valent iron (nZVI/rGO): selenium removal mechanism

Se(IV) removal using nanoscale zero-valent iron (nZVI) has been extensively studied. Still, the synergistic removal of Se(IV) by reduced graphene oxide-supported nanoscale zero-valent iron (nZVI/rGO) has not been reported. In this study, nZVI/rGO was successfully synthesized for Se(IV) removal from wastewater. The effects of different environmental conditions (load ratio, dosage, initial pH) on Se(IV) removal by nZVI/rGO were investigated. When the load ratio is 10%, the dosage is 0.3 g/L, the initial pH is 3, and the removal rate is 99%. The adsorption isotherm and kinetics accorded with the Langmuir isotherm and first-order kinetics models (R² > 0.99). The fitted maximum adsorption capacity reached up to 173.53 mg/g. NZVI/rGo and Se(IV) is a spontaneous endothermic reaction (△G < 0, △H > 0) and is characterized by EDS, XRD, and XPS before and after the reaction, to further clarify the reaction mechanism. The XPS narrow spectrum analysis suggested that Se(IV) was reduced to elemental selenium (Se(0)), while the intermediate Fe(II) was oxidized to form hydroxide precipitation. Therefore, nZVI/rGO was favored for Se-contaminated wastewater remediation.

Selenium in the Prevention of SARS-CoV-2 and Other Viruses

The rapid spread of new pathogens (SARS-CoV-2 virus) that negatively affect the human body has huge consequences for the global public health system and the development of the global economy. Appropriate implementation of new safety regulations will improve the functioning of the current model supervising the inhibition of the spread of COVID-19 disease. Compliance with all these standards will have a key impact on the health behavior of individual social groups. There have been demonstrably effective treatments that proved to be effective but were rapidly dismissed for unknown reasons, such as ivermectin and hydroxychloroquine. Various measures are used in the world to help inhibit its development. The properties of this element provide hope in preventing the development of the SARS-CoV-2 virus. The aim of this review is to synthesize the latest literature data and to present the effect of sodium selenite in reducing the incidence of COVID-19 disease.

Allotropy of selenium nanoparticles: Colourful transition, synthesis, and biotechnological applications

Elemental selenium (Se⁰ ) nanomaterials undergo allotropic transition from thermodynamically-unstable to more stable phases. This process is significantly different when Se⁰ nanoparticles (NPs) are produced via physico-chemical and biological pathways. While the allotropic transition of physico-chemically synthesized Se⁰ is fast (minutes to hours), the biogenic Se⁰ takes months to complete. The biopolymer layer covering biogenic Se⁰ NPs might be the main factor controlling this retardation, but this still remains an open question. Phylogenetically-diverse bacteria reduce selenium oxyanions to red amorphous Se⁰ allotrope, which has low market value. Then, red Se⁰ undergoes allotropic transition to trigonal (metallic grey) allotrope, the end product having important industrial applications (e.g. semiconductors, alloys). Is it not yet clear whether biogenic Se⁰ presents any biological function, or it is mainly a detoxification and respiratory by-product. The better understanding of this transition would benefit the recovery of Se⁰ NPs from secondary resources and its targeted utilization with respect to each allotropic stage. This review article presents and critically discusses the main physico-chemical methods and biosynthetic pathways of Se⁰ (bio)mineralization. In addition, the article proposes a conceptual model for the resource recovery potential of trigonal selenium nanomaterials in the context of circular economy.

Microbial functional communities and the antibiotic resistome profile in a high-selenium ecosystem

Enshi City, in the Hubei Province of China, is known as the world capital of selenium with the most abundant selenium resource. An important selenium hyperaccumulator plant, Cardamine violifolia, was found to naturally grow in this high-selenium ecosystem. However, relatively little is known about the impact of the selenium levels on microbial community and functional shifts in C. violifolia rhizosphere. Here, we tested the hypothesis that underground microbial diversity and function vary along a selenium gradient, including antibiotic resistance genes (ARGs). Comprehensive metagenomic analyses, such as taxonomic investigation, functional detection, and ARG annotation, showed that selenium, mercury, cadmium, lead, arsenic, and available phosphorus and potassium were correlated with microbial diversity and function. Thaumarchaeota was exclusively dominant in the highest selenium concentration of mine outcrop, and Rhodanobacter and Nitrospira were predominant in the high-selenium ecosystem. The plant C. violifolia enriched a high concentration of selenium in the rhizosphere compared to those in the bulk soil, and it recruited Variovorax and Polaromonas in its rhizosphere. Microbial abundance showed a trend of increasing first and then decreasing from low to high selenium concentrations. Annotation of ARGs showed that the multidrug resistance genes adeF, mtrA, and poxtA, the aminoglycoside resistance gene rpsL, and the sulfonamide resistant gene sul2 were enriched in the high-selenium system. It was discovered that putative antibiotic resistant bacteria displayed obvious differences in the farmland and the soils with various selenium concentrations, indicating that a high-selenium ecosystem harbors the specific microbes with a higher capacity to enrich or resist selenium, toxic metals, or antibiotics. Taken together, these results reveal the effects of selenium concentration and the selenium hyperaccumulator plant C. violifolia on shaping the microbial functional community and ARGs. Metalloid selenium-inducible antibiotic resistance is worth paying attention to in future.

Influence of aluminate and silicate on selenate immobilization using alkaline-earth metal oxides and ferrous salt

Effects of aluminate and silicate species on the SeO₄^2- immobilization using alkali-earth metal oxides and ferrous species have not been clearly elucidated. In the present study, Al and Si species were separately added into MgO/Fe(II) and CaO/Fe(II) reactions containing SeO₄^2-, studied by toxicity characteristic leaching procedure (TCLP), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray absorption fine structure (XAFS), and PHREEQC simulation. Approximately 42 % of SeO₄^2- was reduced to SeO₃^2- for MgO/Fe(II) reaction in the presence of Al species, being consistent with the case without Al species. The Al species only showed slight inhibition of Se leaching for the MgO/Fe(II) reaction. Most of Se oxyanions were adsorbed onto Mg(OH)₂ through outer-sphere complexation. For CaO/Fe(II) reaction, all of SeO₄^2- was reduced to SeO₃^2- with or without Al species. However, the Se leaching amount (3 %) of sample added with Al species (CE3) is much lower than that (12 %) of sample without Al species (CE2). This is mainly because SeO₃^2- can be sorbed onto the iron-based minerals through binuclear bidentate corner-sharing (²C) complexation instead of monodentate mononuclear corner-sharing (¹V) complexation of the case without Al species. On the other hand, SeO₄^2- was not reduced to SeO₃^2- in the presence of silicate, and almost all of Se was leached out for silicate-contained samples except CaO/Fe(II) reaction with the addition of Al species. This is due to the polymerization of Al and Si species under a high-alkalinity environment, thereby stabilizing SeO₄^2- in the amorphous silicon-aluminum structure and contributing to the decrease of Se leaching.

Selenium Oxoanions Removal from Wastewater by MoS42− Intercalated FeMgAl LDH: Catalytic Roles of Fe and Mechanism Insights

FeMgAl−MoS4 LDH was successfully synthesized by a one-pot hydrothermal process followed by ion-exchange methods, and this novel adsorbent was first conducted for aqueous selenite and selenate elimination. The Fe as a component for metal cation layers of LDHs could modulate the layer charge density, leading to more functional groups inserted into layers, and more importantly, this heterogeneous Fe can catalyze the surface reactions between Se(IV) or Se(VI) with S(-II) for oxoanions sequestration. The mechanisms are ion exchange between functional groups with HSeO3− and SeO32− for Se(IV) or SeO42− for Se(VI), followed by reduction by S(-II) from MoS42− groups. The existence of Fe in LDH cation layers, obviously enhanced the reactions (almost two times more for Se(IV) and three times more for Se(VI), respectively), resulting in satisfying adsorption capacities of 483.9 mg/g and 167.2 mg/g for Se(IV) and Se(VI), respectively. Mechanisms were further revealed by elementary analysis, XRD, FT−IR, SEM−EDX, and XPS, as well as the quantitative study. For sorption kinetics, the calculated values of capacities from the pseudo-second-order model are much closer to the experimental values. For sorption isotherms, Langmuir is better than the Freundlich isotherms model for closer capacities (505 mg/g for selenite and 172 mg/g for selenate). All these results demonstrated that the presence of heterogeneous Fe could catalyze the reduction of Se (IV/VI) for the aqueous system, and maybe other high oxidative states hazardous ions. So FeMgAl−MoS4 is a kind of novel adsorbent that offers a promising multi-functional and highly efficient solution for water selenium purification.

Dual RNA and 16S ribosomal DNA sequencing reveal arbuscular mycorrhizal fungi-mediated mitigation of selenate stress in Zea mays L. and reshaping of soil microbiota

Excessively high concentrations of selenium (Se) in soil are toxic to crop plants, and inoculation with arbuscular mycorrhizal fungi (AMF) can reverse Se stress in maize (Zea mays L.). To investigate the underlying mechanisms, maize seedlings were treated with sodium selenate (5 mg Se[VI] kg^-1) and/or AMF (Funneliformis mosseae and Claroideoglomus etunicatum). Dual RNA sequencing in mycorrhiza and 16 S ribosomal DNA sequencing in soil were performed. The results showed that Se(VI) application alone decreased plant dry weight, but increased plant Se concentration, total Se content (mainly selenocysteine), and root superoxide content. Inoculation with either F. mosseae or C. etunicatum increased plant dry weight, decreased Se accumulation and selenocysteine proportion, enhanced root peroxidase activity, and alleviated oxidative stress in Se(VI)-treated plants. Inoculation also downregulated the expression of genes encoding Se transporters, assimilation enzymes, and cysteine-rich receptor-like kinases in Se(VI)-stressed plants, similar to plant-pathogen interaction and glutathione metabolism related genes. Conversely, genes encoding selenium-binding proteins and those related to phenylpropanoid biosynthesis were upregulated in inoculated plants under Se(VI) stress. Compared with Se(VI)-free plants, Se tolerance index, symbiotic feedback percentage on plant dry weight, and root colonization rate were all increased in inoculated plants under Se(VI) stress, corresponding to upregulated expression of 'key genes' in symbiosis. AMF inoculation increased bacterial diversity, decreased the relative abundances of selenobacteria related to plant Se absorption (e.g., Proteobacteria and Firmicutes), and improved bacterial network complexity in Se(VI)-stressed soils. We suggest that stress-mediated enhancement of mycorrhizal symbiosis contributed to plant Se(VI) tolerance, whereas AMF-mediated reshaping of soil bacterial community structure prevented excessive Se accumulation in maize.

Maritime pollution in the Indian Ocean after the MV X-Press Pearl accident

The MV X-Press Pearl marine debacle severely affected the marine environment in the Indian Ocean. The objective of this study is to monitor environmental pollution along the west coast of Sri Lanka. Beach sand samples were collected from 40 locations. Visual and microscopic observations, plastic pellets pollution index (PPI), and degradation effects of plastic nurdles were examined. Chemical and thermal characteristics were investigated using Inductively Coupled Plasma Mass Spectrometric analysis (ICP-MS) and Fourier Transform Infra-Red Spectroscopic analysis (FTIR) analyses, respectively. Cylindrical-shaped plastic nurdles (>0.2 cm in size) were observed in off-white (mainly), yellow, and black colours. The white colour plastic nurdles change to yellow at 240 °C and black at 300 °C. Epamulla (PPI = 1940-3364) and Sarakkuwa (PPI = 2158-3466) beaches were recognized as the most contaminated beaches during the initial sampling (i.e., after six to eight days of the explosion of the vessel). Well-rounded small plastic nurdles (i.e., after one year of the disaster) can indicate degradation effects. FTIR results confirm (i) plastic nurdles as low-density polyethylene (LDPE) and (ii) alteration of the chemical composition of nurdles at a low temperature of 60 °C. In this case, a significant amount of microplastics have been added to the environment under the influence of UV irradiation and abrasion against beach sand. In addition, the presence of heavy metals (e.g., arsenic, cadmium, lead, and copper) in swash zone sediments is a great threat to marine animals and plants. Consequently, the ingestion of microplastics and heavy metals would be increased in a wide range of marine organisms and can be bio-accumulated in humans through seafood and salt.

Selenite and Selenate Sequestration during Coprecipitation with Barite: Insights from Mineralization Processes of Adsorption, Nucleation, and Growth

Coprecipitation of selenium oxyanions with barite is a facile way to sequester Se in the environments. However, the chemical composition of Se-barite coprecipitates usually deviates from that predicted from thermodynamic calculations. This discrepancy was resolved by considering variations in nucleation and growth rates controlled by ion-mineral interactions, solubility, and interfacial energy. For homogeneous precipitation, ∼10% of sulfate, higher than thermodynamic predictions (<0.3%), was substituted by Se(IV) or Se(VI) oxyanion, which was attributed to adsorption-induced entrapment during crystal growth. For heterogeneous precipitation, thiol- and carboxylic-based organic films, utilized as model interfaces to mimic the natural organic-abundant environments, further enhanced the sequestration of Se(VI) oxyanions (up to 41-92%) with barite. Such enhancement was kinetically driven by increased nucleation rates of selenate-rich barite having a lower interfacial energy than pure barite. In contrast, only small amounts of Se(IV) oxyanions (∼1%) were detected in heterogeneous coprecipitates mainly due to a lower saturation index of BaSeO₃ and deprotonation degree of Se(IV) oxyanion at pH 5.6. These roles of nanoscale mineralization mechanisms observed during composition selection of Se-barite could mark important steps toward the remediation of contaminants through coprecipitation.

Lignin Microspheres Modified with Magnetite Nanoparticles as a Selenate Highly Porous Adsorbent

Highly porous lignin-based microspheres, modified by magnetite nanoparticles, were used for the first time for the removal of selenate anions, Se(VI), from spiked and real water samples. The influence of experimental conditions: selenate concentration, adsorbent dosage and contact time on the adsorption capacity was investigated in a batch experimental mode. The FTIR, XRD, SEM techniques were used to analyze the structural and morphological properties of the native and exhausted adsorbent. The maximum adsorption capacity was found to be 69.9 mg/g for Se(VI) anions at pH 6.46 from the simulated water samples. The modified natural polymer was efficient in Se(VI) removal from the real (potable) water samples, originated from six cities in the Republic of Serbia, with an overage efficacy of 20%. The regeneration capacity of 61% in one cycle of desorption (0.5 M NaOH as desorption solution) of bio-based adsorbent was gained in this investigation. The examined material demonstrated a significant affinity for Se(VI) oxyanion, but a low potential for multi-cycle material application; consequently, the loaded sorbent could be proposed to be used as a Se fertilizer.

Selenium Nanowire Formation by Reacting Selenate with Magnetite

The mobility of ⁷⁹Se, a fission product of ²³⁵U and long-lived radioisotope, is an important parameter in the safety assessment of radioactive nuclear waste disposal systems. Nonradioactive selenium is also an important contaminant of drainage waters from black shale mountains and coal mines. Highly mobile and soluble in its high oxidation states, selenate (Se(VI)O₄^2-) and selenite (Se(IV)O₃^2-) oxyanions can interact with magnetite, a mineral present in anoxic natural environments and in steel corrosion products, thereby being reduced and consequently immobilized by forming low-solubility solids. Here, we investigated the sorption and reduction capacity of synthetic nanomagnetite toward Se(VI) at neutral and acidic pH, under reducing, oxygen-free conditions. The additional presence of Fe(II)_aq, released during magnetite dissolution at pH 5, has an effect on the reduction kinetics. X-ray absorption spectroscopy analyses revealed that, at pH 5, trigonal gray Se(0) formed and that sorbed Se(IV) complexes remained on the nanoparticle surface during longer reaction times. The Se(0) nanowires grew during the reaction, which points to a complex transport mechanism of reduced species or to active reduction sites at the tip of the Se(0) nanowires. The concomitant uptake of aqueous Fe(II) and Se(VI) ions is interpreted as a consequence of small pH oscillations that result from the Se(VI) reduction, leading to a re-adsorption of aqueous Fe(II) onto the magnetite, renewing its reducing capacity. This effect is not observed at pH 7, where we observed only the formation of Se(0) with slow kinetics due to the formation of an oxidized maghemite layer. This indicates that the presence of aqueous Fe(II) may be an important factor to be considered when examining the environmental reactivity of magnetite.

Succession of function, assembly, and interaction of microbial community in sequencing biofilm batch reactors under selenite stress

The mechanism of interaction between selenite, a toxic substance, and the microbial community in wastewater is still not well understood. Herein, nine sequencing biofilm batch reactors were used to systematically investigate the response of the microbial community to the continuous selenite stress. The results showed that selenite affected the reactor performance and reduced the biofilm mass. Also, it increased the proportion of the living cells, and changed the protein and polysaccharide composition of the biofilm as well as cellular secretions. Selenite facilitated the removal of NO₃-N, according to water-quality and bioinformatics analyses. As such, the selenite was converted into selenium nanoparticles. α-diversity analysis further revealed that 20 μM selenite enhanced the microbial community resilience, while 200 μM selenite had the reverse effect. Community composition analysis showed that Variovorax, Rhizobium, and Simkania had positive correlations with selenite (P < 0.05). Functional prediction suggested that selenite changed the C, N, and S cycle functions. Furthermore, determinism dominated the community assembly process, and the deterministic proportion increased with the increase of selenite concentration. Network analysis showed that selenite improved the stability and positive correlation ratio of the overall microbial network, and accelerated the communication between microorganisms. However, when compared with the 20 μM selenite, the 200 μM selenite boosted the competition and parasitism/predation among microorganisms. Low-abundance genera played a key role in the network of selenite-reducing microbial community. In addition, under selenite stress, biofilm network exhibited better stability and faster information exchange than suspended network, and the positive association between biofilm and suspended microorganisms increased. All in all, this research sheds light on the interaction between selenite and microbial community, as well as provides crucial information on selenium-containing wastewater.

Retention of immobile Se(0) in flow-through aquifer column systems during bioreduction and oxic-remobilization

Selenium (Se) is a toxic contaminant with multiple anthropogenic sources, including ⁷⁹Se from nuclear fission. Se mobility in the geosphere is generally governed by its oxidation state, therefore understanding Se speciation under variable redox conditions is important for the safe management of Se contaminated sites. Here, we investigate Se behavior in sediment groundwater column systems. Experiments were conducted with environmentally relevant Se concentrations, using a range of groundwater compositions, and the impact of electron-donor (i.e., biostimulation) and groundwater sulfate addition was examined over a period of 170 days. X-Ray Absorption Spectroscopy and standard geochemical techniques were used to track changes in sediment associated Se concentration and speciation. Electron-donor amended systems with and without added sulfate retained up to 90% of added Se(VI)_(aq), with sediment associated Se speciation dominated by trigonal Se(0) and possibly trace Se(-II); no Se colloid formation was observed. The remobilization potential of the sediment associated Se species was then tested in reoxidation and seawater intrusion perturbation experiments. In all treatments, sediment associated Se (i.e., trigonal Se(0)) was largely resistant to remobilization over the timescale of the experiments (170 days). However, in the perturbation experiments, less Se was remobilized from sulfidic sediments, suggesting that previous sulfate-reducing conditions may buffer Se against remobilization and migration.

Novel triazine-based cationic covalent organic polymers for highly efficient and selective removal of selenate from contaminated water

Selenium (Se) removal from contaminated water has become a major environmental problem in recent years. Designing efficient and selective materials for selenium adsorption is urgent and still represents a great challenge. Herein, two novel cationic covalent triazine frameworks (CTFS-Cl and CTFL-Cl) are developed for the first time and employed as a new class of Se adsorbents. The results from systematic adsorption experiments indicate that these materials can adsorb SeO₄^2- in a wide range of pH values (2-11) with fast kinetics (5 min), outstanding adsorption capacity, and excellent selectivity over other competing anions. The maximum adsorption capacity achieved (149.3 mg/g by CTFS-Cl) constitutes one of the highest values among the organic polymeric materials. More importantly, after a single step adsorption, these materials can reduce the Se concentrations to lower than 10 μg/L, the lowest drinking water standard in the world. The adsorption mechanism was probed by XPS technique, EDS analysis, adsorption experiments, and DFT calculations, which reveals that anion exchange between Cl^- and SeO₄^2- is the main driving force for Se adsorption. Additionally, CTFS-Cl and CTFL-Cl perform well toward real contaminated river water sample with the residual Se being less than 8.49 μg/L. This work demonstrates the excellent performance of CTFs-based materials with great application prospect for Se removal in contaminated water treatment.

Tissue culture tools for selenium hyperaccumulator Neptunia amplexicaulis for development in phytoextraction

Neptunia amplexicaulis is an herbaceous legume endemic to the Richmond area in central Queensland, Australia and is one of the strongest known Selenium hyperaccumulators on earth, showing significant potential to be utilised in Se phytoextraction applications. Here a protocol was established for in vitro micropropagation of Se hyperaccumulator N. amplexicaulis using nodal segments from in vitro-germinated seedlings. Shoot multiplication was achieved on Murashige and Skoog (MS) basal media supplemented with various concentrations of 6-Benzylaminopurine (BA) (1.0, 2.0, 3.0 mg L^-1) alone or in combination with low levels of Naphthaleneacetic acid (NAA) (0.1, 0.2, 0.3 mg L^-1), with 2.0 mg L^-1 BA + 0.2 mg L^-1 NAA found to be most effective. Elongated shoots were rooted in vitro using NAA, with highest root induction rate of 30% observed at 0.2 mg L^-1 NAA. About 95% of the in vitro rooted shoots survived acclimatization. Clonally propagated plantlets were dosed with selenate/selenite solution and assessed for Se tissue concentrations using Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and found to retain their ability to hyperaccumulate. The protocol developed for this study has potential to be optimised for generating clonal plants of N. amplexicaulis for use in research and phytoextraction industry applications.

Bioremediation of selenium-contaminated soil using earthworm Eisenia fetida: Effects of gut bacteria in feces on the soil microbiome

Selenium (Se) contamination in the soil poses a food safety risk to humans. The present study was to investigate the role of earthworm Eisenia fetida in soil Se remediation. When exposed to selenite at 4 mg Se/kg, E. fetida efficiently concentrated Se in tissues (24.53 mg Se/kg dry weight), however, only accounting for a minor portion of the added Se. Microbial analysis shows 12 out of 15 functional genera became more abundant in the worm-inhabited soil when exposed to Se, suggesting E. fetida contributed to Se remediation mainly by introducing Se-reducing bacteria to the soil via feces, which were dominated by the genera Pseudomonas (∼62.65%) and Aeromonas (∼29.99%), whose abundance was also significantly boosted in the worm-inhabited soil. However, when isolated from worm feces at 200 mg Se/L, Pseudomonas strains only displayed a high tolerance to Se rather than removal capacity. In contrast, among 4 isolated Aeromonas strains, A. caviae rapidly removing 85.74% of the added selenite, mainly through accumulation (67.38%), while A. hydrophila and A. veronii were more effective at volatilizing Se (27.77% and 24.54%, respectively), and A. media performed best by reducing Se by ∼49.00% under anaerobic conditions. Overall, our findings have highlighted the importance of E. fetida as a key contributor of functional bacteria to the soil microbiome, building a strong foundation for the development of an earthworm-soil system for Se bioremediation.

Selenium species removal by nanofiltration: Determination of retention mechanisms

Selenium (Se) is a dissolved oxyanion drinking water contaminant requiring appropriate removal technologies. The removal of selenite (Se^IV) and selenite (Se^VI) with nanofiltration (NF) was investigated with an emphasis on the role of Se speciation and membrane charge screening on the retention mechanisms. The pH (2 to 12) showed strong pH dependence of Se retention, which was due to the speciation. No significant impact of salinity was observed by increasing NaCl concentration from 0.58 to 20 g/L. Application of the Donnan steric pore partitioning model with dielectric exclusion (DSPM-DE) showed that Donnan exclusion was the dominant retention mechanism for the oxyanions Se species. Nine different organic matter (OM) types were investigated at 10 mgC/L to determine if OM affects Se retention. Only OM characterised by negatively charged fractions, such as humic acid (HA), enhanced Se retention with NF270 of up to 20% for Se^IV and 10% for Se^VI. This was explained by enhanced Donnan exclusion. NF270 was effective in removing Se from real water (Gahard groundwater, Ille et Vilaine, France). The EU guideline (20 μg/L) of Se in drinking water was achieved with comparable performance to OM-free experiments using synthetic waters.

Advancements in Bioelectricity Generation Through Nanomaterial-Modified Anode Electrodes in Microbial Fuel Cells

The use of nanotechnology in bioelectrochemical systems to recover bioelectricity and metals from waste appears to be a potentially appealing alternative to existing established procedures. This trend exactly characterizes the current renewable energy production technology. Hence, this review focuses on the improvement of the anode electrode by using different functional metal oxide-conducting polymer nanocomposites to enhance microbial fuel cell (MFC) performance. Enhancement of interfacial bioelectrocatalysis between electroactive microorganisms and hierarchical porous nanocomposite materials could enhance cost-effective bioanode materials with superior bioelectrocatalytic activity for MFCs. In this review, improvement in efficiency of MFCs by using iron oxide- and manganese oxide-based polypyrrole hybrid composites as model anode modifiers was discussed. The review also extended to discussing and covering the principles, components, power density, current density, and removal efficiencies of biofuel cell systems. In addition, this research review demonstrates the application of MFCs for renewable energy generation, wastewater treatment, and metal recovery. This is due to having their own unique working principle under mild conditions and using renewable biodegradable organic matter as a direct fuel source.

A Bibliometric Analysis of Research on Selenium in Drinking Water during the 1990-2021 Period: Treatment Options for Selenium Removal

A bibliometric analysis based on the Scopus database was carried out to summarize the global research related to selenium in drinking water from 1990 to 2021 and identify the quantitative characteristics of the research in this period. The results from the analysis revealed that the number of accumulated publications followed a quadratic growth, which confirmed the relevance this research topic is gaining during the last years. High research efforts have been invested to define safe selenium content in drinking water, since the insufficient or excessive intake of selenium and the corresponding effects on human health are only separated by a narrow margin. Some important research features of the four main technologies most frequently used to remove selenium from drinking water (coagulation, flocculation and precipitation followed by filtration; adsorption and ion exchange; membrane-based processes and biological treatments) were compiled in this work. Although the search of technological options to remove selenium from drinking water is less intensive than the search of solutions to reduce and eliminate the presence of other pollutants, adsorption was the alternative that has received the most attention according to the research trends during the studied period, followed by membrane technologies, while biological methods require further research efforts to promote their implementation.

Treatment technologies for selenium contaminated water: A critical review

Selenium is an indispensable trace element for humans and other organisms; however, excessive selenium in water can jeopardize the aquatic environment. Investigations on the biogeochemical cycle of selenium have shown that anthropogenic activities such as mining, refinery, and coal combustion mainly contribute to aquatic selenium pollution, imposing tremendous risks on ecosystems and human beings. Various technologies thus have been developed recently to treat selenium contaminated water to reduce its environmental impacts. This work provides a critical review on the applications, characteristics, and latest developments of current treatment technologies for selenium polluted water. It first outlines the present status of the characteristics, sources, and toxicity of selenium in water. Selenium treatment technologies are then classified into three categories: 1) physicochemical separation including membrane filtration, adsorption, coagulation/precipitation, 2) redox decontamination including chemical reduction and catalysis, and 3) biological transformation including microbial treatment and constructed wetland. Details of these methods including their overall efficiencies, applicability, advantages and drawbacks, and latest developments are systematically analyzed and compared. Although all these methods are promising in treating selenium in water, further studies are still needed to develop sustainable strategies based on existing and new technologies. Perspectives on future research directions are laid out at the end.