Engineered nanomaterials inhibit Podosphaera pannosa infection on rose leaves by regulating phytohormones

From cornfield to catalyst support: Eco-friendly synthesis of Cu/CuO nanoparticles, immobilization on the waste corn husk fibers, photocatalytic exploration and bioactivity evaluation

This study presents an innovative approach to eco-friendly synthesis and utilization of copper nanoparticles (CuNPs) for photocatalytic applications, employing waste corn husk fibers as sustainable catalyst support. The synthesis of CuNPs was achieved through a green synthesis method utilizing myrtle extract. Subsequently, the remarkable photocatalytic activity of the CuNPs explored (76% removal efficiency of Crystal Violet), showcased their potential in environmental remediation applications. Furthermore, the immobilization of CuNPs onto waste corn husk fibers was investigated, aiming to develop a novel composite material with enhanced catalytic performance. A distinctive approach was introduced by immobilizing CuNPs onto fibers derived from corn husks, and waste biomass material, leading to a significant enhancement in photocatalytic efficiency, surpassing 95.1%. Furthermore, bioactivity evaluation studies revealed the significant antioxidant, antidiabetic, DNA fragmentation, cell viability, antibiofilm and antimicrobial properties of CuNPs. The antioxidant ability was determined at 100 mg/L as 87.12%. The most powerful antimicrobial activity of CuNP was found as a MIC value of 8 mg/L against E. faecalis. The cell viability inhibition of CuNP was 90.05% at 20 mg/L. CuNP exhibited biofilm inhibition activity at different concentrations. The antibiofilm ability was investigated against Staphylococcus aureus compared to Pseudomonas aureginosa. While the DNA cleavage activity of CuNP observed double-strand breaks at 50 and 100 mg, complete fragmentation occurred at 200 mg concentrations. The bioactivity of the synthesized CuNPs shed light on their potential biomedical applications. The synthesized CuNPs are characterized using various analytical techniques to elucidate their structural and morphological properties. Fourier-transform infrared (FTIR) analysis provided insights into the chemical composition and surface properties of the synthesized materials. EDS analysis confirmed their successful integration into waste corn husk fibers. Overall, this interdisciplinary study highlights the potential of CuNPs immobilized on waste corn husk fibers for addressing environmental pollution, advancing sustainable technologies and paving the way for the development of efficient catalysts with diverse functionalities.

Review on interactions between nanomaterials and phytohormones: Novel perspectives and opportunities for mitigating environmental challenges

Nanotechnology offers the potential to provide innovative solutions for sustainable crop production as plants are exposed to a combination of climate change factors (CO2, temperature, UV radiation, ozone), abiotic (heavy metals, salinity, drought), and biotic (virus, bacteria, fungi, nematode, and insects) stresses. The application of particular sizes, shapes, and concentration of nanomaterials (NMs) potentially mitigate the negative impacts in plants by modulation of photosynthetic rate, redox homeostasis, hormonal balance, and nutrient assimilation through upregulation of anti-stress metabolites, antioxidant defense pathways, and genes and genes network. The present review inculcates recent advances in uptake, translocation, and accumulation mechanisms of NMs in plants. The critical theme of this review provides detailed insights into different physiological, biochemical, molecular, and stress tolerance mechanism(s) of NMs action and their cross-talk with different phytohormones. The role of NMs as a double-edged sword for climate change factors, abiotic, and biotic stresses for nutrients uptake, hormones synthesis, cytotoxic, and genotoxic effects including chromosomal aberration, and micronuclei synthesis have been extensively studied. Importantly, this review aims to provide an in-depth understanding of the hormesis effect at low and toxicity at higher doses of NMs under different stressors to develop innovative approaches and design smart NMs for sustainable crop production.

Trichoderma cf. asperellum and plant-based titanium dioxide nanoparticles initiate morphological and biochemical modifications in Hordeum vulgare L. against Bipolaris sorokiniana

BACKGROUND

Spot blotch is a serious foliar disease of barley (Hordeum vulgare L.) plants caused by Bipolaris sorokiniana, which is a hemibiotrophic ascomycete that has a global impact on productivity. Some Trichoderma spp. is a promising candidate as a biocontrol agent as well as a plant growth stimulant. Also, the application of nanomaterials in agriculture limits the use of harmful agrochemicals and helps improve the yield of different crops. The current study was carried out to evaluate the effectiveness of Trichoderma. cf. asperellum and the biosynthesized titanium dioxide nanoparticles (TiO2 NPs) to manage the spot blotch disease of barley caused by B. sorokiniana and to assess the plant's innate defense response.

RESULTS

Aloe vera L. aqueous leaf extract was used to biosynthesize TiO2 NPs by reducing TiCl4 salt into TiO2 NPs and the biosynthesized NPs were detected using SEM and TEM. It was confirmed that the NPs are anatase-crystalline phases and exist in sizes ranging from 10 to 25 nm. The T. cf. asperellum fungus was detected using morphological traits and rDNA ITS analysis. This fungus showed strong antagonistic activity against B. sorokiniana (57.07%). Additionally, T. cf. asperellum cultures that were 5 days old demonstrated the best antagonistic activity against the pathogen in cell-free culture filtrate. Also, B. sorokiniana was unable to grow on PDA supplemented with 25 and 50 mg/L of TiO2 NPs, and the diameter of the inhibitory zone increased with increasing TiO2 NPs concentration. In an in vivo assay, barley plants treated with T. cf. asperellum or TiO2 NPs were used to evaluate their biocontrol efficiency against B. sorokiniana, in which T. cf. asperellum and TiO2 NPs enhanced the growth of the plant without displaying disease symptoms. Furthermore, the physiological and biochemical parameters of barley plants treated with T. cf. asperellum or TiO2 NPs in response to B. sorokiniana treatment were quantitively estimated. Hence, T. cf. asperellum and TiO2 NPs improve the plant's tolerance and reduce the growth inhibitory effect of B. sorokiniana.

CONCLUSION

Subsequently, T. cf. asperellum and TiO2 NPs were able to protect barley plants against B. sorokiniana via enhancement of chlorophyll content, improvement of plant health, and induction of the barley innate defense system. The present work emphasizes the major contribution of T. cf. asperellum and the biosynthesized TiO2 NPs to the management of spot blotch disease in barley plants, and ultimately to the enhancement of barley plant quality and productivity.

Fabrication of three-dimension hierarchical structure CuO nanoflowers and their antifungal mechanism against Bipolaris sorokiniana

Nanomaterials are widely investigated in sustainable agriculture owing to their unique physicochemical properties, especially Cu-based nanomaterial with eco-friendliness and essential for plant. However, the effect of CuO nanomaterial on Bipolaris sorokiniana (B. sorokiniana) is yet to be systematically understood. In this study, a three-dimension hierarchical structure CuO nanoflower (CuO NF) with ultrathin petals and excellent dispersibility in water was constructed and proved to have outstanding antifungal activity against B. sorokiniana with the inhibition rate of 86 % in mycelial growth, 74 % in mycelial dry weight and 75 % in conidial germination. Furthermore, the antifungal mechanism was assigned to the production of reactive oxygen species in intracellular caused by antioxidant mimicking activity of CuO NF to damage of cell membrane integrity and result cellular leakage. Additionally, the good control effect of CuO NF on wheat diseases caused by B. sorokiniana was demonstrated through pot experiment. This article firstly reveals the antifungal activity and mechanism of CuO NF on B. sorokiniana, and establishes the relationship between enzyme-like activity of CuO NF and its antifungal activity, which provides a promising application of Cu-based nanomaterial as nanofungicide in plant protection and a theoretical foundation for structure design of nanomaterials to improve their antifungal activities.

New insights into the environmental application of hybrid nanoparticles in metal contaminated agroecosystem: A review

Heavy metals (HMs) contamination in agricultural soils is a major constraint to provide safe food to society. Cultivation of food crops on these soils, channels the HMs into the food chain and causes serious human health and socioeconomic problems. Multiple conventional and non-conventional remedial options are already in practice with variable success rates, but nanotechnology has proved its success due to higher efficiency. It also led the hypothesis to use hybrid nanoparticles (HNPs) with extended benefits to remediate the HMs and supplement nutrients to enhance the crop yield in the contaminated environments. Hybrid nanoparticles are defined as exclusive chemical conjugates of inorganic and/or organic nanomaterials that are combinations of two or more organic components, two or more inorganic components, or at least one of both types of components. HNPs of different elements like essential nutrients, beneficial nutrients and carbon-based nanoparticles are used for the remediation of metals contaminated soil and the production of metal free crops. Characterizing features of HNPs including particle size, surface area, reactivity, and solubility affect the efficacy of these HNPs in the contaminated environment. Hybrid nanoparticles have great potential to remove the HMs ions from soil solution and restrict their ingress into the root tissues. Furthermore, HNPs of essential nutrients not only compete with heavy metal uptake by plants but also fulfill the need of nutrients. This review provides a comprehensive overview of the challenges associated with application of HNPs in contaminated soils, environmental implications, their remediation ability, and factors affecting their dynamics in environmental matrices.

Silicon-based nanoparticles for mitigating the effect of potentially toxic elements and plant stress in agroecosystems: A sustainable pathway towards food security

Due to their size, flexibility, biocompatibility, large surface area, and variable functionality nanoparticles have enormous industrial, agricultural, pharmaceutical and biotechnological applications. This has led to their widespread use in various fields. The advancement of knowledge in this field of research has altered our way of life from medicine to agriculture. One of the rungs of this revolution, which has somewhat reduced the harmful consequences, is nanotechnology. A helpful ingredient for plants, silicon (Si), is well-known for its preventive properties under adverse environmental conditions. Several studies have shown how biogenic silica helps plants recover from biotic and abiotic stressors. The majority of research have demonstrated the benefits of silicon-based nanoparticles (Si-NPs) for plant growth and development, particularly under stressful environments. In order to minimize the release of brine, heavy metals, and radioactive chemicals into water, remove metals, non-metals, and radioactive components, and purify water, silica has also been used in environmental remediation. Potentially toxic elements (PTEs) have become a huge threat to food security through their negative impact on agroecosystem. Si-NPs have the potentials to remove PTEs from agroecosystem and promote food security via the promotion of plant growth and development. In this review, we have outlined the various sources and ecotoxicological consequences of PTEs in agroecosystems. The potentials of Si-NPs in mitigating PTEs were extensively discussed and other applications of Si-NPs in agriculture to foster food security were also highlighted.

Recent trends and perspectives in the application of metal and metal oxide nanomaterials for sustainable agriculture

Sustainable ecosystem management leads to the use of eco-friendly agricultural techniques for crop production. One of them is the use of metal and metal oxide nanomaterials and nanoparticles, which have proven to be a valuable option for the improvement of agricultural food systems. Moreover, the biological synthesis of these nanoparticles, from plants, bacteria, and fungi, also contributes to their eco-friendly and sustainable characteristics. Nanoparticles, which vary in size from 1 to 100 nm have a variety of mechanisms that are safer and more efficient than conventional fertilizers. Their usage as fertilizers and insecticides in agriculture is gaining favor in the scientific community to maximize crop output. More studies in this field will increase our understanding of this new technology and its broad acceptance in terms of performance, affordability, and environmental protection, as certain nanoparticles may outperform conventional fertilizers and insecticides. Accordingly, to the information gathered in this review, nanoparticles show remarkable potential for enhancing crop production, improving soil quality, and protecting the environment, however, metal and metal oxide NPs are not widely employed in agriculture. Many features of nanoparticles are yet left over, and it is necessary to uncover them. In this sense, this review article provides an overview of various types of metal and metal oxide nanoparticles used in agriculture, their characterization and synthesis, the recent research on them, and their possible application for the improvement of crop productivity in a sustainable manner.

Engineered Metal Oxide Nanoparticles as Fungicides for Plant Disease Control

Metal oxide nanoparticles are considered to be good alternatives as fungicides for plant disease control. To date, numerous metal oxide nanoparticles have been produced and evaluated as promising antifungal agents. Consequently, a detailed and critical review on the use of mono-, bi-, and tri-metal oxide nanoparticles for controlling phytopathogenic fungi is presented. Among the studied metal oxide nanoparticles, mono-metal oxide nanoparticles-particularly ZnO nanoparticles, followed by CuO nanoparticles -are the most investigated for controlling phytopathogenic fungi. Limited studies have investigated the use of bi- and tri-metal oxide nanoparticles for controlling phytopathogenic fungi. Therefore, more studies on these nanoparticles are required. Most of the evaluations have been carried out under in vitro conditions. Thus, it is necessary to develop more detailed studies under in vivo conditions. Interestingly, biological synthesis of nanoparticles has been established as a good alternative to produce metal oxide nanoparticles for controlling phytopathogenic fungi. Although there have been great advances in the use of metal oxide nanoparticles as novel antifungal agents for sustainable agriculture, there are still areas that require further improvement.

Application and mechanisms of metal-based nanoparticles in the control of bacterial and fungal crop diseases

Nanotechnology is a young branch of the discipline generated by nanomaterials. Its development has greatly contributed to technological progress and product innovation in the field of agriculture. The antimicrobial properties of nanoparticles (NPs) can be used to develop nanopesticides for plant protection. Plant diseases caused by bacterial and fungal infestations are the main types of crop diseases. Once infected, they will seriously threaten crop growth, reduce yield and quality, and affect food safety, posing a health risk to humans. We reviewed the application of metal-based nanoparticles in inhibiting plant pathogenic bacteria and fungi, and discuss the antibacterial mechanisms of metal-based nanoparticles from two aspects: the direct interaction between nanoparticles and pathogens, and the indirect effects of inducing plant resilience to disease. © 2022 Society of Chemical Industry.

Bio-Functionalized Manganese Nanoparticles Suppress Fusarium Wilt in Watermelon (Citrullus lanatus L.) by Infection Disruption, Host Defense Response Potentiation, and Soil Microbial Community Modulation

The use of nanofabricated materials is being explored for the potential in crop disease management. Chemically synthesized micronutrient nanoparticles (NPs) have been shown to reduce crop diseases; however, the potential of biogenic manganese NPs (bio-MnNPs) in disease control is unknown. Here, the potential and mechanism of bio-MnNPs in suppression of watermelon Fusarium wilt, caused by Fusarium oxysporum f. sp. niveum (Fon) are reported. Bio-MnNPs are synthesized by cell-free cultural filtrate of a waterrmelon rhizosphere bacterial strain Bacillus megaterium NOM14, and are found spherical in shape with a size range of 27.0-65.7 nm. Application of bio-MnNPs at 100 µg mL^-1 increases Mn content in watermelon roots/shoots and improves growth performance through enhancing multiple physiological processes, including antioxidative capacity. Bio-MnNPs at 100 µg mL^-1 suppress Fusarium wilt through inhibiting colonization and invasive growth of Fon in watermelon roots/stems, and inhibit Fon vegetative growth, conidiation, conidial morphology, and cellular integrity. Bio-MnNPs potentiate watermelon systemic acquired resistance by triggering the salicylic acid signaling upon Fon infection, and reshape the soil microbial community by improving fungal diversity. These findings demonstrate that bio-MnNPs suppress watermelon Fusarium wilt by multiple ex planta and in planta mechanisms, and offer a promising nano-enabled strategy for the sustainable management of crop diseases.

Recent progress in bio-mediated synthesis and applications of engineered nanomaterials for sustainable agriculture

The ever-increasing demand for agricultural food products, medicine, and other commercial sectors requires new technologies for agricultural practices and promoting the optimum utilization of natural resources. The application of engineered nanomaterials (ENMs) enhance the biomass production and yield of food crop while resisting harmful environmental stresses. Bio-mediated synthesis of ENMs are time-efficient, low-cost, environmentally friendly, green technology. The precedence of using a bio-mediated route over conventional precursors for ENM synthesis is non-toxic and readily available. It possesses many active agents that can facilitate the reduction and stabilization processes during nanoparticle formation. This review presents recent developments in bio-mediated ENMs and green synthesis techniques using plants, algae, fungi, and bacteria, including significant contributions to identifying major ENM applications in agriculture with potential impacts on sustainability, such as the role of different ENMs in agriculture and their impact on different plant species. The review also covers the advantages and disadvantages of different ENMs and potential future research in this field.

Nanotechnology for Nanophytopathogens: From Detection to the Management of Plant Viruses

Plant viruses are the most destructive pathogens which cause devastating losses to crops due to their diversity in the genome, rapid evolution, mutation or recombination in the genome, and lack of management options. It is important to develop a reliable remedy to improve the management of plant viral diseases in economically important crops. Some reports show the efficiency of metal nanoparticles and engineered nanomaterials and their wide range of applications in nanoagriculture. Currently, there are reports for the use of nanoparticles as an antibacterial and antifungal agent in plants and animals too, but few reports as plant antiviral. “Nanophytovirology” has been emerged as a new branch that covers nanobased management approaches to deal with devastating plant viruses. Varied nanoparticles have specific physicochemical properties that help them to interact in various unique and useful ways with viruses and their vectors along with the host plants. To explore the antiviral role of nanoparticles and for the effective management of plant viruses, it is imperative to understand all minute details such as the concentration/dosage of nanoparticles, time of application, application interval, and their mechanism of action. This review focused on different aspects of metal nanoparticles and metal oxides such as their interaction with plant viruses to explore the antiviral role and the multidimensional perspective of nanotechnology in plant viral disease detection, treatment, and management.

Synthesis of magnetic nanoparticles and their effects on growth and physiological parameters of Calotropis procera seedlings

The present study was carried out to elucidate effects of synthesized magnetic nanoparticles (MNPs) on morphological and physiological parameters and main essential oil components of Calotropis procera seedlings. For this purpose, 21-day-old seedlings grown under hydroponic conditions were treated by the different MNP concentrations (0, 50, 100, 150, and 200 mg L^-1). The results showed that the growth parameters, chlorophyll pigments, soluble sugars, and total proteins significantly increased in leaf under MNP treatment, except for the root length. As compared to the control, MNPs induced a substantial change in the activities of antioxidant enzymes, H₂O₂, and malondialdehyde contents. Ascorbate peroxidase activity showed a meaningful increase in leaf treated with 200 mg L^-1 MNPs, while superoxide dismutase activity and concentration of H₂O₂ conspicuously decreased relative to the control. Moreover, MNPs enhanced geranial, 1,8-cineol, a-phellandrene, citronellal, camphor, and terpinen-4-ol contents as major components. These results suggest that MNPs could be a promising method of iron application in agricultural systems. Regarding the effects of MNPs, 200-mg L^-1 MNPs were most effective on the production of main essential oils and plant growth that could serve as a favorable elicitor for plant improvement.

Nanosized zinc oxide (n-ZnO) particles pretreatment to alfalfa seedlings alleviate heat-induced morpho-physiological and ultrastructural damages

Global efforts are in rapid progress to tackle the emerging conundrum of climate change-induced heat stress in grassland ecosystems. Zinc oxide nanoparticles (n-ZnO) are known to play a crucial role in plants' abiotic stress regulation, but its response in alfalfa against heat stress has not been explored. This study aimed at assessing the effects of n-ZnO on alfalfa under heat stress by various morpho-physiological and cellular approaches. Five-week-old alfalfa seedlings were subjected to foliar application of n-ZnO as a pretreatment before the onset of heat stress (BHS) to evaluate its effect on heat tolerance, and as a post-treatment after heat stress (AHS) to evaluate recovery efficiency. In vitro studies on Zn release from n-ZnO by Inductively coupled plasma mass spectroscopy (ICPMS) disclosed that the particle uptake and Zn release were concentration dependent. The uptake and translocation of n-ZnO examined by transmission electron microscope (TEM) reveling showed that n-ZnO was primarily localized in the vacuoles and chloroplasts. TEM images showed that ultrastructural modifications to chloroplast, mitochondria, and cell wall were reversible by highest dose of n-ZnO applied before heat stress, and damages to these organelles were not recoverable when n-ZnO was applied after heat stress. The results further enlightened that 90 mg L^-1 n-ZnO better prevented the heat stress-mediated membrane damage, lipid peroxidation and oxidative stress by stimulating antioxidant systems and enhancing osmolyte contents in both BHS and AHS. Although, application of 90 mg L^-1 n-ZnO in BHS was more effective in averting heat-induced damages and maintaining better plant growth and morpho-physiological attributes compared to AHS. Conclusively, foliar application of n-ZnO can be encouraged as an effective strategy to protect alfalfa from heat stress damages while minimizing the risk of nanoparticle transmission to environmental compartments, which could happen with soil application.

Engineering plants with carbon nanotubes: a sustainable agriculture approach

Sustainable agriculture is an important conception to meet the growing food demand of the global population. The increased need for adequate and safe food, as well as the ongoing ecological destruction associated with conventional agriculture practices are key global challenges. Nanomaterials are being developed in the agriculture sector to improve the growth and protection of crops. Among the various engineered nanomaterials, carbon nanotubes (CNTs) are one of the most promising carbon-based nanomaterials owing to their attractive physiochemical properties such as small size, high surface area, and superior mechanical and thermal strength, offering better opportunities for agriculture sector applications. This review provides basic information about CNTs, including their history; classification; and electrical, thermal, and mechanical properties, with a focus on their applications in the agriculture field. Furthermore, the mechanisms of the uptake and translocation of CNTs in plants and their defense mechanisms against environmental stresses are discussed. Finally, the major shortcomings, threats, and challenges of CNTs are assessed to provide a broad and clear view of the potential and future directions for CNT-based agriculture applications to achieve the goal of sustainability.

Nanobioremediation: A sustainable approach for the removal of toxic pollutants from the environment

In recent years, the proportion of organic and inorganic contaminants has increased rapidly due to growing human interference and represents a threat to ecosystems. The removal of these toxic pollutants from the environment is a difficult task. Physical, chemical and biological methods are implemented for the degradation of toxic pollutants from the environment. Among existing technologies, bioremediation in combination with nanotechnology is the most promising and cost-effective method for the removal of pollutants. Numerous studies have shown that exceptional characteristics of nanomaterials such as improved catalysis and adsorption properties as well as high reactivity have been subjects of great interest. There is an emerging trend of employing bacterial, fungal and algal cultures and their components, extracts or biomolecules as catalysts for the sustainable production of nanomaterials. They can serve as facilitators in the bioremediation of toxic compounds by immobilizing or inducing the synthesis of remediating microbial enzymes. Understanding the association between microorganisms, contaminants and nanoparticles (NPs) is of crucial importance. In this review, we focus on the removal of toxic pollutants using the cumulative effects of nanoparticles with microbial technology and their applications in different domains. Besides, we discuss how this novel nanobioremediation technique is significant and contributes towards sustainability.

A biocide delivery system composed of nanosilica loaded with neem oil is effective in reducing plant toxicity of this biocide

One possible way to reduce the environmental impacts of pesticides is by nanostructuring biocides in nanocarriers because this promotes high and localized biocidal activity and can avoid toxicity to non-target organisms. Neem oil (NO) is a natural pesticide with toxicity concerns to plants, fish, and other organisms. Thus, loading NO in a safe nanocarrier can contribute to minimizing its toxicity. For this study, we have characterized the integrity of a nanosilica-neem oil-based biocide delivery system (SiO₂NP#NO BDS) and evaluated its effectiveness in reducing NO toxicity by the Allium cepa test. NO, mainly consisted of unsaturated fatty acids, was well binded to the SiO₂NP with BTCA crosslinker. Overall, this material presented all of its pores filled with the NO with fatty acid groups at both the surface and bulk level of the nanoparticle. The thermal stability of NO was enhanced after synthesis, and the NO was released as zero-order model with a total of 20 days without burst release. The SiO₂NP#NO BDS was effective in reducing the individual toxicity of NO to the plant system. NO in single form inhibited the seed germination of A. cepa (EC₅₀ of 0.38 g L^-1), and the effect was no longer observed at the BDS condition. Contrarily to the literature, the tested NO did not present cyto- and geno-toxic effects in A. cepa, which may relate to the concentration level and composition.

Copper stress alleviation in corn (Zea mays L.): Comparative efficiency of carbon nanotubes and carbon nanoparticles

Copper (Cu) stress is one of the predominant crop yield-reducing factors in agriculture. Application of carbon nanomaterials (CNMs) could have promotive effects on crop growth; however, their effects on alleviation of Cu stress for plants have rarely been documented. In this study, we investigated the comparative role of carbon nanotubes (CNTs) and carbon nanoparticles (CNPs) in corn (Zea mays) seed germination, seedling growth as well as Cu stress alleviation. The results showed that CNTs and CNPs stimulated corn seed germination by significantly increasing germination rate (GR), shortening the mean germination time (MGT), and increasing overall germination index (GI). They also significantly elongated seedling length and increased fresh biomass with optimal application rates ranging from 50 to 100 mg L^-1. Principle component analysis (PCA) confirmed that seed germination indexes and seedling growth were positively affected by CNTs or CNPs, but inversely influenced by high levels of Cu stress (> 20 mg L^-1). Furthermore, higher Cu accumulation and anti-oxidative enzyme activity (SOD, POD, CAT) were observed in plants co-exposed to Cu²⁺ and either CNTs or CNPs compared to plants exposed to Cu²⁺ alone. CNPs had stronger improvement on plant growth and Cu stress alleviation than CNTs, which suggest they may be cost-effective agriculture amendments to improve plant growth under heavy metal stress.

Ethylene participates in zinc oxide nanoparticles induced biochemical, molecular and ultrastructural changes in rice seedlings

Nowadays, the applications of engineered nanoparticles (ENPs) have been significantly increased, thereby negatively affecting crop production and ultimately contaminating the food chain worldwide. Zinc oxide nanoparticles (ZnO NPs) induced oxidative stress has been clarified in previous studies. But until now, it has not been investigated that how ethylene mediates or participates in ZnO NPs-induced toxicity and related cellular ultrastructural changes in rice seedlings. Here, we reported that 500 mg/L of ZnO NPs reduced the fresh weight (54.75% and 55.64%) and dry weight (40.33% and 47.83%) in shoot and root respectively as compared to control. Furthermore, ZnO NPs (500 mg/L) reduced chlorophyll content (72% Chla, 70% Chlb), induced the stomatal closure and ultrastructural damages by causing oxidative stress in rice seedlings. These cellular damages were significantly increased by exogenous applications of ethylene biosynthesis precursor (ACC) in the presence of ZnO NPs. In contrary, ZnO NPs induced damages on the above-mentioned attributes were reversed through the exogenous supply of ethylene signaling and biosynthesis antagonists such as silver (Ag) and cobalt (Co) respectively. Interestingly, ZnO NPs accelerate ethylene biosynthesis by up-regulating the transcriptome of ethylene biosynthesis responsive genes. The antioxidant enzymes activities and related gene expressions were further increased in ethylene signaling and biosynthesis associated antagonists (Ag and Co) treated seedlings as compared to sole ZnO NPs treatments. In contrary, the above-reported attributes were further decreased by ACC together with ZnO NPs. In a nutshell, ethylene effectively contributes in ZnO NPs induced toxicity and causing ultrastructural and stomatal damage in rice seedlings. Such findings could have potential implications in producing genetic engineered crops, which will be able to tolerate nanoparticles toxicity in the environment.

Functionalized Magnetic Nanomaterials in Agricultural Applications

The development of functional nanomaterials exhibiting cost-effectiveness, biocompatibility and biodegradability in the form of nanoadditives, nanofertilizers, nanosensors, nanopesticides and herbicides, etc., has attracted considerable attention in the field of agriculture. Such nanomaterials have demonstrated the ability to increase crop production, enable the efficient and targeted delivery of agrochemicals and nutrients, enhance plant resistance to various stress factors and act as nanosensors for the detection of various pollutants, plant diseases and insufficient plant nutrition. Among others, functional magnetic nanomaterials based on iron, iron oxide, cobalt, cobalt and nickel ferrite nanoparticles, etc., are currently being investigated in agricultural applications due to their unique and tunable magnetic properties, the existing versatility with regard to their (bio)functionalization, and in some cases, their inherent ability to increase crop yield. This review article provides an up-to-date appraisal of functionalized magnetic nanomaterials being explored in the agricultural sector.

Effects of Graphene Oxide on Germination and Early Growth of Plants

Owing to its excellent material properties such as large surface area and superb mechanical and thermal characteristics, graphene oxide (GO) is likely to be applied in a variety of environmental fields. These applications may lead to the entrance of GO in terrestrial ecosystems, but there is little research regarding the impact of GO on plants upon such entrances. To analyze the effects of GO on the germination and growth of various plants, the changes in lettuce, radish, perennial ryegrass, alfalfa, and cucumber seeds under GO treatment was studied. Germination rate and growth were analyzed after the seeds were exposed to GO at 0, 0.2, 0.4, 0.8, and 1.6 mg ml^-1. For lettuce, the germination rate decreased with GO concentration. However, no significant effects were observed on the germination rate of other plants. On the other hand, the growth of lettuce, alfalfa, and radish decreased under GO treatment. For example, at 1.6 mg ml^-1 of GO, the length of shoot and root of lettuce was shortened by 87% and 86%, respectively. Such results indicate that the germination and early growth of plants can be negatively affected in a species-specific manner under high concentrations of GO. Hence, we anticipate that our results may assist in supplementing the legal regulations for the proper disposal of nanomaterials.

Polystyrene microplastics disturb the redox homeostasis, carbohydrate metabolism and phytohormone regulatory network in barley

As emerging contaminants, microplastics (mPS, <5 mm) have been reported to adversely affect the plant growth; however, the mechanisms of mPS-induced growth limitation are rarely known. Here, it was found that the plastic particles were absorbed and accumulated in barley plants, which limited the development of rootlets. The mPS-treated plants had significantly higher concentrations of H₂O₂ and O₂^- in roots than the control. The mPS significantly increased the activities of dehydroascorbate reductase, glutathione reductase, ADP-Glucose pyrophosphorylase, fructokinase and phosphofructokinase, while decreased the activities of cell wall peroxidase, vacuolar invertase, sucrose synthase, phosphoglucomutase, glucose-6-phosphate dehydrogenase and phosphoglucoisomerase in roots. The changes in activities of carbohydrate and ROS metabolism enzymes in leaves showed a different trend from that in roots. The mPS plants possessed a higher trans-zeatin concentration while lower concentrations of indole-3-acetic acid, indole-3-butyric acid and dihydrozeatin than the control plants in leaves. However, the phytohormone changes in roots were distinct from those in leaves under mPS. In addition, significant correlations between enzyme activities and phytohormone concentrations were found. It was suggested that the phytohormone regulatory network plays key roles in regulating the activities of key enzymes involved in carbohydrate and ROS metabolisms in response to mPS in barley.

Foliar Application of Copper Oxide Nanoparticles Suppresses Fusarium Wilt Development on Chrysanthemum

Micronutrients applied as nanoparticles of metal oxides have shown efficacy in vegetable and other crops for improving yield and reducing Fusarium diseases, but their role in ornamental crop management has not been investigated. In 2017, 2018, and 2020, nanoparticles of CuO, Mn₂O₃, or ZnO were foliarly applied at 500 μg/mL (0.6 mg/plant) to chrysanthemum transplants and planted in potting soil noninfested or infested with Fusarium oxysporum f. sp. chrysanthemi. An untreated control and a commercial fungicide, Fludioxonil, was also included. Chrysanthemums treated with nanoscale CuO had a 55, 30, and 32% reduction in disease severity ratings compared to untreated plants in 2017, 2018, and 2020, respectively. Specifically, the average dry biomass for the three years was reduced 22% by disease, but treatment with nanoscale CuO led to a 23% increase when compared to controls. Similar trends with plant height were observed. Horticultural quality was improved 28% with nano CuO and was equal to the fungicide. Nanoscale Mn₂O₃ and the fungicide did not consistently reduce disease ratings or increase dry biomass each year. Nanoscale ZnO was ineffective. Nanoscale CuO-treated plants had 24 to 48% more Cu/g tissue than controls (P < 0.001). These findings agree with past reports on food crops where single applications of nanoscale CuO improved plant health, growth, and yield and could offer significant impacts for managing plant diseases on ornamentals.

Effect of Foliar Fertigation of Chitosan Nanoparticles on Cadmium Accumulation and Toxicity in Solanum lycopersicum

Simple Summary

The experiment conducted on Solanum lycopersicum provided an insight about Cd uptake, and the way a Solanum lycopersicum changes its physiological, biochemical and morphological responses when CTS-NPs are administered against Cd. As an effective important polymer, CTS-NPs enhanced the plant biomass, SPAD index, photosynthetic rate, and protein content in the Solanum lycopersicum plants grown in Cd stress, as a study herein. Addition of CTS-NPs reduced Cd accumulation by increasing the nutrient uptake. Furthermore, CTS-NPs treatment enhances tolerance to Cd stress through hampering ROS production accompanied by H₂O₂ activity, through reducing the peroxidation of lipids by minimizing MDA content, and through improving enzymatic (CAT, POX, SOD), non-enzymatic (GSH and AsA), and osmoprotectants (proline) antioxidant contents that are considered as a first line of defense to protect plants from stress.

Abstract

Cadmium (Cd) stress is increasing at a high pace and is polluting the agricultural land. As a result, it affects animals and the human population via entering into the food chain. The aim of this work is to evaluate the possibility of amelioration of Cd stress through chitosan nanoparticles (CTS-NPs). After 15 days of sowing (DAS), Solanum lycopersicum seedlings were transplanted into maintained pots (20 in number). Cadmium (0.8 mM) was providing in the soil as CdCl₂·2.5H₂O at the time of transplanting; however, CTS-NPs (100 µg/mL) were given through foliar spray at 25 DAS. Data procured from the present experiment suggests that Cd toxicity considerably reduces the plant morphology, chlorophyll fluorescence, in addition to photosynthetic efficiency, antioxidant enzyme activity and protein content. However, foliar application of CTS-NPs was effective in increasing the shoot dry weight (38%), net photosynthetic rate (45%) and SPAD index (40%), while a decrease in malondialdehyde (24%) and hydrogen peroxide (20%) was observed at the 30 DAS stage as compared to control plants. On behalf of the current results, it is demonstrated that foliar treatment of CTS-NPs might be an efficient approach to ameliorate the toxic effects of Cd.

CuO, ZnO, and γ-Fe2O3 nanoparticles modified the underground biomass and rhizosphere microbial community of Salvia miltiorrhiza (Bge.) after 165-day exposure

To investigate whether metal oxide nanoparticles exhibit toxicity or positive effects on medicinal plants, CuO, ZnO, and γ-Fe₂O₃ nanoparticles (NPs), at concentrations of 100 and 700 mg kg^-1_, were introduced into the cultivation of Salvia miltiorrhiza (Bge.). Metal elemental contents, chemical constituents, biomass and the structure of the rhizosphere microbial community was used to estimate this effect. The results indicated CuO NPs increased the Cu content and ZnO NPs increased the Zn content significantly as exposure increased, γ-Fe₂O₃ NPs had no significant effect on Fe content in S. miltiorrhiza roots, while 100 mg kg^-1 ZnO and CuO NPs significantly decreased the Fe content in roots. Additionally, ZnO and γ-Fe₂O₃ NPs increased the underground biomass, and diameter of S. miltiorrhiza roots. However, these three metal oxide nanoparticles had no significant effect on total tanshinones, while the 700 mg kg^-1 γ-Fe₂O₃ NPs treatment increased salvianolic acid B content by 36.46%. High-throughput sequencing indicated at 700 mg kg^-1 ZnO NPs, the relative abundance of Humicola (Zn superoxide dismutase producer), was notably increased by 97.46%, and that of Arenimonas, Thiobacillus and Methylobacillus (taxa related to heavy metal tolerance) was significantly increased by 297.14%, 220.26% and 107.00%. The 700 mg kg^-1 CuO NPs exposure caused a significant increase in the relative abundances of Sphingomonas (a copper-resistant and N₂-fixing genus) and Flavisolibacter (stripe rust biocontrol bacteria) by 127.32% and 118.33%. To our best knowledge, this is the first study to examine the potential impact of NPs on the growth and rhizosphere microorganisms of S. miltiorrhiza.

Synthesis and Characterization of Novel Copper Nanoparticles for the Control of Leaf Spot and Anthracnose Diseases of Olive

Olive crop is frequently treated with copper fungicides to combat foliar and fruit diseases such as olive leaf spot caused by Fusicladium oleagineum and anthracnose caused by Colletotrichum spp. The replacement of copper-based products with more eco-friendly alternatives is a priority. Metal nanoparticles synthesized in several ways have recently revolutionized crop protection with applications against important crop pathogens. In this study, we present the development of four copper-based nanoparticles (CuNP Type 1 to 4) synthesized with a wet chemistry approach. The CuNPs were characterized using Transmission Electron Microscopy, Dynamic Light Scattering, Laser Doppler Electrophoresis, and Attenuated Total Reflection measurements. In addition, the activity of the four CuNP types was tested in vitro and in planta against F. oleagineum and Colletotrichum spp. In vitro sensitivity measurements showed that for both pathogens, mycelial growth was the most susceptible developmental stage to the tested compounds. Against both pathogens, CuNP Type 1 and Type 2 were found to be more active in reducing mycelial growth compared to the reference commercial compounds of copper oxide and copper hydroxide. In planta experiments showed that CuNP Type 3 and CuNP Type 4 exhibited a strong protectant activity against both F. oleagineum and Colletotrichum acutatum with control efficacy values significantly higher than those achieved by the applications of either reference product.

Multi-Wall Carbon Nanotubes Promote the Growth of Maize (Zea mays) by Regulating Carbon and Nitrogen Metabolism in Leaves

Previous studies have suggested that multiwalled carbon nanotubes (MWCNTs) promote plant growth; however, the mechanism is yet to be fully understood. In this study, the effects of MWCNTs (20, 100, and 500 mg/L) on the carbon (C) and nitrogen (N) metabolism in maize were studied to explore the molecular mechanism of the action of MWCNTs on plants. The results showed that 100 mg/L MWCNTs increased the shoot fresh and dry weight, root fresh weight, and seedling length while other doses showed no significant effects. Further studies showed that 100 mg/L MWCNTs increased the chlorophyll content, transpiration rate, stomatal conductance, and intercellular CO₂ concentration, by 50.6%, 60.8%, 47.2%, and 32.1%, respectively. Activities of key enzymes including sucrose synthase (SS), sucrose phosphate synthase (SPS) and phosphoenolpyruvate carboxylase (PEPC) that are involved in the carbon metabolism, and nitrate reductase (NR), glutamine synthetase (GS), and glutamate synthetase (GOGAT) that are involved in N metabolism, were all upregulated by 100 mg/L MWCNTs, which contributed to the increase of the accumulation of carbohydrates (sugar and starch), soluble protein, and N in plants. These findings suggest that MWCNTs can improve plant growth by regulating the key enzymes involved in C and N metabolism thereby enhancing the carbohydrate production and the use of N and improving plant growth. This study provides significant insights into the molecular mechanism of the positive effects of MWCNTs on plants and provide a basis for the agricultural application of MWCNTs.

Different physiological responses of C3 and C4 plants to nanomaterials

Several studies have previously reported that nanomaterial uptake and toxicity in plants are species dependent. However, the differences between photosynthetic pathways, C3 and C4, following nanomaterial exposure are poorly understood. In the current work, wheat and rice, two C3 pathway species are compared to amaranth and maize, which utilize the C4 photosynthetic mechanism. These plants were cultured in soils which were spiked with CuO, Ag, TiO₂, MWCNT, and FLG nanomaterials. Overall, the C4 plant exhibited higher resilience to NM stress than C3 plants. In particular, significant differences were observed in chlorophyll contents with rice returning a 40.9-54.2% decrease compared to 3.5-15.1% for maize. Fv/Fm levels were significantly reduced by up to 51% in rice whereas no significant reductions were observed in amaranth and maize. Furthermore, NM uptake in the C3 species was greater than that in C4 plants, a trend that was also seen in metal concentration. TEM results showed that CuO NPs altered the chloroplast thylakoid structure in rice leaves and a large number of CuO NPs were observed in the vascular sheath cells. In contrast, there were no significant changes in the chloroplasts in the vascular sheath and no significant CuO NPs were found in maize leaves. This study was the first to systematically characterize the effect of metal and carbon-based nanomaterials in soil on C3 and C4 plants, providing a new perspective for understanding the impact of nanomaterials on plants.

Graphitic carbon nitride (g-C3N4) alleviates cadmium-induced phytotoxicity to rice (Oryza sativa L.)

In the present study, graphitic carbon nitride (g-C3N4) was synthesized in a tube furnace and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR). Different concentrations (0-200 mg/L) of g-C3N4 were prepared in nutrient solution amended with or without 20 mg/L CdCl2 for the greenhouse study. Rice seedlings were exposed to g-C3N4 and Cd for 20 days. Our results suggest that 200 mg/L g-C3N4 significantly increased the fresh weight and root and shoot length as compared with the control, and notably alleviated Cd-induced toxicity. The addition of 200 mg/L g-C3N4 significantly reduced the root and shoot Cd content by approximately 14% and 23%, respectively. In addition, 200 mg/L g-C3N4 significantly elevated the nitrogen content and decreased C/N ration in rice shoots; most importantly, it alleviated Cd-induced nitrogen reduction. Our findings demonstrated the potential of g-C3N4 in regulating plant growth and minimizing the Cd-induced phytotoxicity, and shed light on providing a new strategy to maintain heavy metal contamination in agriculture using a low-cost and environmental friendly NMs.

Carbon Nanotubes Decrease the Negative Impact of Alternaria solani in Tomato Crop

The diseases that attack the tomato crop are a limiting factor for its production and are difficult to control or eradicate. Stem and fruit rot and leaf blight caused by Alternaria solani causes severe damage and substantial yield losses. Carbon nanotubes (CNTs) could be an alternative for the control of pathogens since they have strong antimicrobial activity, in addition to inducing the activation of the antioxidant defense system in plants. In the present study, multi-walled carbon nanotubes were evaluated on the incidence and severity of A. solani. Moreover, to the impact they have on the antioxidant defense system and the photosynthetic capacity of the tomato crop. The results show that the application of CNTs had multiple positive effects on tomato crop. CNTs decreased the incidence and severity of A. solani. Furthermore, CNTs increased the fruit yield of tomato crop and dry shoot biomass. The antioxidant system was improved, since the content of ascorbic acid, flavonoids, and the activity of the glutathione peroxidase enzyme were increased. The net photosynthesis and water use efficiency were also increased by the application of CNTs. CNTs can be an option to control A. solani in tomato crop, and diminish the negative impact of this pathogen.

Titanium dioxide nanoparticles elicited agro-morphological and physicochemical modifications in wheat plants to control Bipolaris sorokiniana

The current study involves the biogenesis of titanium dioxide nanoparticles (TiO2 NPs) by using Moringa oleifera Lam. aqueous leaf extract for the reduction of titanium dioxide salt into TiO2 nanoparticles. The biosynthesized TiO2 nanoparticles were observed by using the UV-visible spectrophotometry, SEM, EDX and XRD analytical methods. It was confirmed that the nanoparticles are crystalline and exist in the size range of 10-100 nm. The FTIR analysis confirmed the presence of O-H (hydrogen bonding), N-H (amide), C-C (alkanes) and C-I (Iodo-stretch) functional groups responsible for the stabilization of nanoparticles. Various concentrations (20, 40, 60 and 80 mg/L) of TiO2 NPs were applied exogenously on wheat plants infected with a fungus Bipolaris sorokiniana responsible to cause spot blotch disease at different time intervals. The measurement of disease incidence and percent disease index showed the time-dependent response and 40 mg/L was reported a stable concentration of TiO2 NPs to reduce the disease severity. The effects of biosynthesized TiO2 NPs were also evaluated for agro-morphological (leaf and root surface area, plant fresh and dry weight and yield parameters), physiological (relative water content, membrane stability index and chlorophyll content) and non-enzymatic metabolites (soluble sugar, protein, soluble phenol and flavonoid content) in wheat plants under biotic stress and 40 mg/L concentration of TiO2 NPs was found to be effective to elicit modifications to reduce biotic stress. The current study highlights the significant role of biosynthesized TiO2 NPs in controlling fungal diseases of wheat plants and thus ultimately improving the quality and yield of wheat plants.

OsFTIP7 determines metallic oxide nanoparticles response and tolerance by regulating auxin biosynthesis in rice

The widely application of metallic oxide nanoparticles (NPs) has led to an increase in their accumulation in farmland. Previous studies have found that the metallic oxide NPs have negative effect on plants development and growth. Nonetheless, the underlying mechanism of response to metallic oxide NPs in rice remains elusive. In this study, we show that rice FT-INTERACTING PROTEIN 7 (OsFTIP7) plays an essential role in NPs of CuO and ZnO-mediated physiological and biochemical changes in rice. Loss of function of OsFTIP7 reduced the toxicity of the NPs of CuO and ZnO to the seedlings by accumulating more biomass and chlorophyll contents. Furthermore, after high exposure to metallic oxide NPs, more indole-3-acetic acid (IAA) were determined in Osftip7 with higher expression of auxin biosynthetic genes than the control seedlings. What's more, IAA-treated seedlings displayed the similar phenotype as Osftip7 under high concentrations of NPs of CuO and ZnO. Taken together, the results substantiate that OsFTIP7 is involved in metallic oxide nanoparticle-mediated physiological and biochemical changes by negatively regulating auxin biosynthesis in rice.

Effect of Fe3O4 and CuO Nanoparticles on Morphology, Genotoxicity, and miRNA Expression on Different Barley (Hordeum vulgare L.) Genotypes

Metal nanoparticles (NPs) have an influence on plant growth and development. They can alter plant shoot and root length, fresh biomass production, and even influence the genome. Nanoparticles are also able to affect expression levels of plant microRNAs. MicroRNAs are able to protect plants from biotic stress, including pathogens which cause powdery mildew. In this study, Hordeum vulgare L. varieties "Marthe" and "KWS Olof" were grown in hydroponics with magnetic iron oxide (Fe3O4) and copper oxide (CuO) NPs added at 17, 35, and 70 mg/L. Plant morphology, genotoxicity, and expression of miR156a were investigated. The Fe3O4 and CuO NPs demonstrated different effects on the barley varieties, namely, Fe3O4 nanoparticles increased plant shoot and root lengths and fresh biomass, while CuO nanoparticles decreased them. CuO NPs presence caused larger changes on barley genome compared to Fe3O4 NPs. Thus, Fe3O4 NPs reduced genome stability to 72% in the "Marthe" variety and to 76.34% in the "KWS Olof" variety, while CuO NPs reduced genome stability to 53.33% in "Marthe" variety and in the "KWS Olof" variety to 68.81%. The miR156a expression levels after Fe3O4 NPs treatment did not change in the "Marthe" variety, but increased in the "KWS Olof" variety, while CuO NPs treatment increased miRNA expression levels in the "Marthe" variety but decrease them in the "KWS Olof" variety. As NPs are able to influence miRNA expression and miRNAs can affect the plant resistance, obtained results suggest that tested NPs may alter plant resistance response to pathogens.

Application of Nanoparticles Alleviates Heavy Metals Stress and Promotes Plant Growth: An Overview

Nanotechnology is playing a significant role in addressing a vast range of environmental challenges by providing innovative and effective solutions. Heavy metal (HM) contamination has gained considerable attention in recent years due their rapidly increasing concentrations in agricultural soil. Due to their unique physiochemical properties, nanoparticles (NPs) can be effectively applied for stress alleviation. In this review, we explore the current status of the literature regarding nano-enabled agriculture retrieved from the Web of Science databases and published from January 2010 to November 2020, with most of our sources spanning the past five years. We briefly discuss uptake and transport mechanisms, application methods (soil, hydroponic and foliar), exposure concentrations, and their impact on plant growth and development. The current literature contained sufficient information about NPs behavior in plants in the presence of pollutants, highlighting the alleviation mechanism to overcome the HM stress. Furthermore, we present a broad overview of recent advances regarding HM stress and the possible mechanism of interaction between NPs and HM in the agricultural system. Additionally, this review article will be supportive for the understanding of phytoremediation and micro-remediation of contaminated soils and also highlights the future research needs for the combined application of NPs in the soil for sustainable agriculture.

Advanced material modulation of nutritional and phytohormone status alleviates damage from soybean sudden death syndrome

Customized Cu3(PO4)2 and CuO nanosheets and commercial CuO nanoparticles were investigated for micronutrient delivery and suppression of soybean sudden death syndrome. An ab initio thermodynamics approach modelled how material morphology and matrix effects control the nutrient release. Infection reduced the biomass and photosynthesis by 70.3 and 60%, respectively; the foliar application of nanoscale Cu reversed this damage. Disease-induced changes in the antioxidant enzyme activity and fatty acid profile were also alleviated by Cu amendment. The transcription of two dozen defence- and health-related genes correlates a nanoscale Cu-enhanced innate disease response to reduced pathogenicity and increased growth. Cu-based nanosheets exhibited a greater disease suppression than that of CuO nanoparticles due to a greater leaf surface affinity and Cu dissolution, as determined computationally and experimentally. The findings highlight the importance and tunability of nanomaterial properties, such as morphology, composition and dissolution. The early seedling foliar application of nanoscale Cu to modulate nutrition and enhance immunity offers a great potential for sustainable agriculture.

Foliar exposure of Fe3O4 nanoparticles on Nicotiana benthamiana: Evidence for nanoparticles uptake, plant growth promoter and defense response elicitor against plant virus

Nanoparticles are recently employed as a new strategy to directly kill pathogens (e.g., bacteria and fungus) and acted as nanofertilizers. However, the influences of this foliar deposition of nanoparticles on plant physiology particularly plant immunity are poorly understood. The uptake and physiological effects of Fe3O4 nanoparticles (Fe3O4NPs), and plant resistance response against Tobacco mosaic virus (TMV) after foliar spraying were studied. Specifically, Fe3O4NPs entered leaf cells and were transported and accumulated throughout the whole Nicotiana benthamiana plant, and increased plant dry and fresh weights, activated plant antioxidants, and upregulated SA synthesis and the expression of SA-responsive PR genes (i.e., PR1 and PR2), thereby enhancing plant resistance against TMV. Conversely, the viral infection was not inhibited in the NahG transgenic plants treated by Fe3O4NPs, suggesting the involvement of salicylic acid (SA) induced by Fe3O4NPs in the production of plant resistance. Moreover, no inhibition was observed of the infection after inoculating with the pretreated TMV mixtures. Thus, the deposition of Fe3O4NPs induced the accumulation of endogenous SA, which was correlated with the plant resistance against TMV infection. Such information is vital for valuing the risk of Fe3O4NPs products and broadens the researching and applying nanoparticles in the fight against plant diseases meantime.

Nanoparticles: Synthesis, Morphophysiological Effects, and Proteomic Responses of Crop Plants

Plant cells are frequently challenged with a wide range of adverse environmental conditions that restrict plant growth and limit the productivity of agricultural crops. Rapid development of nanotechnology and unsystematic discharge of metal containing nanoparticles (NPs) into the environment pose a serious threat to the ecological receptors including plants. Engineered nanoparticles are synthesized by physical, chemical, biological, or hybrid methods. In addition, volcanic eruption, mechanical grinding of earthquake-generating faults in Earth's crust, ocean spray, and ultrafine cosmic dust are the natural source of NPs in the atmosphere. Untying the nature of plant interactions with NPs is fundamental for assessing their uptake and distribution, as well as evaluating phytotoxicity. Modern mass spectrometry-based proteomic techniques allow precise identification of low abundant proteins, protein-protein interactions, and in-depth analyses of cellular signaling networks. The present review highlights current understanding of plant responses to NPs exploiting high-throughput proteomics techniques. Synthesis of NPs, their morphophysiological effects on crops, and applications of proteomic techniques, are discussed in details to comprehend the underlying mechanism of NPs stress acclimation.

Comparative Study on the Fungicidal Activity of Metallic MgO Nanoparticles and Macroscale MgO Against Soilborne Fungal Phytopathogens

Engineered nanoparticles have provided a basis for innovative agricultural applications, specifically in plant disease management. In this interdisciplinary study, by conducting comparison studies using macroscale magnesium oxide (mMgO), we evaluated the fungicidal activity of MgO nanoparticles (nMgO) against soilborne Phytophthora nicotianae and Thielaviopsis basicola for the first time under laboratory and greenhouse conditions. In vitro studies revealed that nMgO could inhibit fungal growth and spore germination and impede sporangium development more efficiently than could macroscale equivalents. Indispensably, direct contact interactions between nanoparticles and fungal cells or nanoparticle adsorption thereof were found, subsequently provoking cell morphological changes by scanning electron microscopy/energy-dispersive spectrometry (SEM/EDS) and transmission electron microscopy (TEM). In addition, the disturbance of the zeta potential and accumulation of various modes of oxidative stress in nMgO-exposed fungal cells accounted for the underlying antifungal mechanism. In the greenhouse, approximately 36.58 and 42.35% decreases in tobacco black shank and black root rot disease, respectively, could testify to the efficiency by which 500 μg/ml of nMgO suppressed fungal invasion through root irrigation (the final control efficiency reached 50.20 and 62.10%, respectively) when compared with that of untreated controls or mMgO. This study will extend our understanding of nanoparticles potentially being adopted as an effective strategy for preventing diversified fungal infections in agricultural fields.

Nano-ZnO-Induced Drought Tolerance Is Associated with Melatonin Synthesis and Metabolism in Maize

The applications of ZnO nanoparticles in agriculture have largely contributed to crop growth regulation, quality enhancement, and induction of stress tolerance, while the underlying mechanisms remain elusive. Herein, the involvement of melatonin synthesis and metabolism in the process of nano-ZnO induced drought tolerance was investigated in maize. Drought stress resulted in the changes of subcellular ultrastructure, the accumulation of malondialdehyde and osmolytes in leaf. The nano-ZnO (100 mg L^-1) application promoted the melatonin synthesis and activated the antioxidant enzyme system, which alleviated drought-induced damage to mitochondria and chloroplast. These changes were associated with upregulation of the relative transcript abundance of Fe/Mn SOD, Cu/Zn SOD, APX, CAT, TDC, SNAT, COMT, and ASMT induced by nano-ZnO application. It was suggested that modifications in endogenous melatonin synthesis were involved in the nano-ZnO induced drought tolerance in maize.

Iron nano-complexes and iron chelate improve biological activities of sweet basil (Ocimum basilicum L.)

In this study, antioxidant and antimicrobial activities of basil (Ocimum basilicum L.) essential oil (EO) in response to different Fe sources (Fe-arginine, Fe-glycine, and Fe-histidine nano-complexes and Fe-EDDHA) were examined. EO samples were predominantly constituted by the phenylpropanoid methyl chavicol (53-89.5%). Application of Fe nano-complexes significantly increased the occurrence and concentration of sesquiterpenes, while decreased the content of oxygenated monoterpenes. Antioxidant activity of basil EOs was evaluated using free radical 2,2-diphenyl-1-picrylhydrazyl, Nitric oxide, H₂O₂ and Thiobarbituric acid reactive substances scavenging assays, and in all assays the highest and the lowest activities were recorded in basils supplied with Fe-histidine nano-complex (1.02, 1.62, 2.21, 3.22 mg mL-1) and control (3.89, 4.89, 5.52, 6.79 mg mL-1), respectively. Fe-histidine nano-complex was the most effective treatment to inhibit fungal (C. albicans: 0.058 mg mL-1; A. niger: 0.066 mg mL-1), Gram-negative (E. coli: 0.181 mg mL-1; S. typhimurium: 0.163 mg mL-1) and Gram-positive (B. subtilis: 0.033 mg mL-1; S. aureus: 0.002 mg mL-1) growth. In conclusion, application of iron nano-complexes significantly altered biological and pharmacological characteristics of basil EOs. Our results are quite encouraging since EOs exhibited potent antioxidant effect and antimicrobial activities.