Characterization and antimicrobial activity of essential oils of industrial hemp varieties (Cannabis sativa L.)

A three-years survey of microbial contaminants in industrial hemp inflorescences from two Italian cultivation sites

BACKGROUND

The use of industrial Cannabis sativa L. for recreational, cosmeceutical, nutraceutical, and medicinal purposes has gained momentum due to its rich content of valuable phytochemicals, such as cannabidiol (CBD) and cannabigerol (CBG). However, there are concerns regarding the risk of microbial contamination in plants grown outside controlled environments. Microbes associated with hemp can be either epiphytes or endophytes and may pose a risk of infectious illness for humans.

METHODS

Seven Italian hemp genotypes, including Bernabeo, Carmagnola, Carmaleonte, Codimono, CS, Eletta Campana, and Fibranova, were cultivated in two distinct geographic locations, Catania and Rovigo, for three consecutive years from 2019 to 2021. Total aerobic microbes (TAMC), total combined yeasts/moulds (TYMC), the presence of bile-tolerant Gram-negative bacteria, and the absence of Escherichia coli and Salmonella spp. were evaluated and compared. The main phytocannabinoid content was measured and correlated with microbial contamination.

RESULTS

Most samples analyzed in this study did not meet the European Pharmacopoeia microbiological limits. The detection of potential pathogens, such as E. coli and Salmonella spp., in the samples indicates that the use of inflorescences may represent a possible source of infection. Microbial contamination varied among harvesting seasons and production sites, with agroclimatic conditions influencing microbial load and composition. The presence of potentially pathogenic bacteria was less associated with seasonal climate variability and more likely affected by sporadic contamination from external sources. CBD concentration exhibited a negative correlation with bile-tolerant Gram-negative bacteria and total yeasts/moulds levels. Samples with lower CBD content were more contaminated than those with higher CBD levels, suggesting a potential protective effect of this phytochemical on the plant.

CONCLUSIONS

The threshing residues (inflorescences, floral bracts, and leaves) of industrial hemp varieties represent a valuable product and a source of beneficial phytochemicals that warrants further exploration. While post-harvest sterilization methods may reduce microbiological risks, they may also degrade heat- and light-sensitive bioactive phytochemicals. The most promising strategy involves implementing best agronomic practices to maintain healthy and uncontaminated cultures. Rigorous monitoring and quality certification protocols are essential to mitigate the microbiological risk associated with the consumption of hemp-derived products.

LVI and DI-SPME Combined with GC/MS and GC/MS for Volatile Chemical Profile Investigation and Cytotoxic Power Evaluation of Essential Oil and Hydrolate from Cannabis sativa L. cv. Carmagnola

Cannabis sativa L. is a plant that has been cultivated since ancient times thanks to its various uses. Even its extraction products, such as essential oil and hydrolate, having a varied chemical composition and rich in bioactive components, find wide use in different sectors, gathering ever-increasing interest over time. In this work, the essential oil of Cannabis sativa L. cv. Carmagnola was characterized by using Gas Chromatography/Mass Spectrometry (GC/MS) and, for the first time, the chemical profile of the hydrolate was also described through different analytical techniques such as Large-Volume Injection Gas Chromatography/Mass Spectrometry (LVI-GC/MS) and Direct Immersion-Solid Phase Microextraction-Gas Chromatography/Mass spectrometry (DI-SPME-GC/MS), in order to provide a more complete compositional profile. The results of the analyses conducted on the hydrolate highlighted a high content of α-terpineol; on the other side, in the essential oil, a prevalence of monoterpenes, with α-pinene and limonene as the characterizing components, was detected. Both matrices were also investigated to evaluate their cytotoxic activity by using a panel of cancer cell lines derived from different histotypes such as melanoma (A375, LOX IMVI), non-small cell lung cancer (H1299, A549), colon (HT29) and pancreatic (L3.6) cancer cell lines. The obtained data demonstrated that essential oil was more effective than hydrolate in terms of reduction in cell viability.

Hemp macromolecules: Crafting sustainable solutions for food and packaging innovation

Industrial hemp has gained increasing interests for its applications in multifaceted areas, including foods, pharmaceuticals and reinforcing materials. The high protein content of hempseeds, presence of essential fatty acids and balanced ratio of omega 6:3 fatty acids, makes hemp an ideal source of choice amongst nutritionists and food product developers. The use of hemp has also been advocated in lowering the risks of certain medical conditions. The antimicrobial and antioxidant feature of oil expands its potential in innovative packaging solutions in the form of coatings or films for shelf-life extension. Fiber from hemp hulls, herd or stalks encourages it as a reinforcement material with eco-friendly attributes. This review explores the applications of hemp in novel product development, with the highlights of its nutritional benefits and antimicrobial efficacy in food and packaging sectors.

Comparison of the Effects of Essential Oils from Cannabis sativa and Cannabis indica on Selected Bacteria, Rumen Fermentation, and Methane Production-In Vitro Study

This study aimed to evaluate the effects of essential oils (EOs) extracted from Cannabis sativa L. and Cannabis indica Lam. on in vitro ruminal fermentation characteristics, selected rumen microbial populations, and methane production. GC-MS analyses allowed us to identify 89 compounds in both EOs. It was found that E-β-caryophyllene predominated in C. sativa (18.4%) and C. indica (24.1%). An in vitro (Ankom) test was performed to analyse the control and monensin groups, as well as the 50 µL or 100 µL EOs. The samples for volatile fatty acids (VFAs), lactate, and microbiological analysis were taken before incubation and after 6 and 24 h. The application of EOs of C. indica resulted in an increase in the total VFAs of acetate and propionate after 6 h of incubation. The applied EOs had a greater impact on the reduction in methane production after 6 h, but no apparent effect was noted after 24 h. Lower concentrations of C. sativa and C. indica had a more pronounced effect on Lactobacillus spp. and Buryrivibrio spp. than monensin. The presented findings suggest that C. sativa and C. indica supplementation can modify ruminal fermentation, the concentrations of specific volatile fatty acids, and methane production.

Evaluating the Metabolomic Profile and Anti-Pathogenic Properties of Cannabis Species

The Cannabis species is one of the potent ancient medicinal plants acclaimed for its medicinal properties and recreational purposes. The plant parts are used and exploited all over the world for several agricultural and industrial applications. For many years Cannabis spp. has proven to present a highly diverse metabolomic profile with a pool of bioactive metabolites used for numerous pharmacological purposes ranging from anti-inflammatory to antimicrobial. Cannabis sativa has since been an extensive subject of investigation, monopolizing the research. Hence, there are fewer studies with a comprehensive understanding of the composition of bioactive metabolites grown in different environmental conditions, especially C. indica and a few other Cannabis strains. These pharmacological properties are mostly attributed to a few phytocannabinoids and some phytochemicals such as terpenoids or essential oils which have been tested for antimicrobial properties. Many other discovered compounds are yet to be tested for antimicrobial properties. These phytochemicals have a series of useful properties including anti-insecticidal, anti-acaricidal, anti-nematicidal, anti-bacterial, anti-fungal, and anti-viral properties. Research studies have reported excellent antibacterial activity against Gram-positive and Gram-negative multidrug-resistant bacteria as well as methicillin-resistant Staphylococcus aureus (MRSA). Although there has been an extensive investigation on the antimicrobial properties of Cannabis, the antimicrobial properties of Cannabis on phytopathogens and aquatic animal pathogens, mostly those affecting fish, remain under-researched. Therefore, the current review intends to investigate the existing body of research on metabolomic profile and anti-microbial properties whilst trying to expand the scope of the properties of the Cannabis plant to benefit the health of other animal species and plant crops, particularly in agriculture.

Anticancer Effects of α-Pinene in AGS Gastric Cancer Cells

Gastric cancer is the fifth most common cancer globally and the third leading cause of cancer-related mortality. Existing treatment strategies for gastric cancer often present numerous side effects. Consequently, recent studies have shifted toward devising new treatments grounded in safer natural substances. α-Pinene, a natural terpene found in the essential oils of various plants, such as Lavender angustifolia and Satureja myrtifolia, displays antioxidant, antibiotic, and anticancer properties. Yet, its impact on gastric cancer remains unexplored. This research assessed the effects of α-pinene in vitro using a human gastric adenocarcinoma cell-line (AGS) human gastric cancer cells and in vivo via a xenograft mouse model. The survival rate of AGS cells treated with α-pinene was notably lower than that of the control group, as revealed by the 3-(4,5-dimethylthiazol-2-yl)-2,5 diphenyltetrazolium bromide assay. This decline in cell viability was linked to apoptosis, as verified by 4',6-diamidino-2-phenylindole and annexin V/propidium iodide staining. The α-pinene-treated group exhibited elevated cleaved-poly (ADP-ribose) polymerase and B cell lymphoma 2 (Bcl-2)-associated X (Bax) levels and reduced Bcl-2 levels compared with the control levels. Moreover, α-pinene triggered the activation of extracellular signal-regulated kinase, c-Jun N-terminal kinase, and p38 within the mitogen-activated protein kinase (MAPK) pathway. In the xenograft mouse model, α-pinene induced apoptosis through the MAPK pathway, devoid of toxicity. These findings position α-pinene as a promising natural therapeutic for gastric cancer.

In vitro Antibacterial Activity of Ethanolic Tanao Si Kan Dang RD1 (Cannabis sativa L.) Extracts Against Human Antibiotic-Resistant Bacteria

<b>Background and Objective:</b> A new strain of cannabis, <i>Cannabis sativa</i> L. Tanao Si Kan Dang RD1, has been approved and registered by the Rajamangala University of Technology Isan, Thailand. The <i>C. sativa</i> is acknowledged for its medicinal properties which demonstrated various therapeutic properties, such as anti-cancer and antibacterial activities. This study aimed to investigate the antibacterial activity of ethanolic extracts from the stems and leaves of the Tanao Si Kan Dang RD1 strain against seven antibiotic-resistant bacteria. <b>Materials and Methods:</b> The primary antibacterial activity of ethanolic Tanao Si Kan Dang RD1 extracts were determined using the disc diffusion method, while the minimum inhibitory concentrations (MICs) and minimum bactericidal concentrations (MBCs) were determined using the broth microdilution method. <b>Results:</b> The largest inhibition zone, measuring 12 mm, was observed in leaf extracts against <i>Pseudomonas aeruginosa</i> 101. The lowest MIC, at 0.78 mg/mL, was obtained from stem extracts against <i>Stenotrophomonas maltophilia</i>. The lowest MBCs, at 12.5 mg/mL, were observed in leaf extracts against <i>Enterococcus faecalis</i>, <i>Acinetobacter baumannii</i>, multidrug-resistant <i>Klebsiella</i> <i>pneumoniae</i>, <i>Stenotrophomonas maltophilia</i> and <i>Pseudomonas aeruginosa</i> 101 and stem extracts against <i>Acinetobacter baumannii</i>, multidrug-resistant <i>Klebsiella pneumoniae</i>, <i>Stenotrophomonas maltophilia</i> and <i>Pseudomonas aeruginosa</i> 101. <b>Conclusion:</b> This study presents a novel finding regarding the antibacterial activity of ethanolic extracts from the leaves and stems of Tanao Si Kan Dang RD1 against antibiotic-resistant bacteria. The potential application of these cannabis plant extracts in the development of antibiotics capable of combating antibiotic-resistant pathogenic bacteria represents a promising strategy to address a significant global health concern.

Characterization and evaluation of nine Cannabis sativa chloroplast SNP markers for crop type determination and biogeographical origin on European samples

Cannabis sativa can be classified in two main types, according to psychotropic cannabinoid ∆9-tetrahydrocannabinol (∆9-THC) content: the drug-type and the fiber-type. According to the European Monitoring Center for Drugs and Drug Addiction, most of the European Union countries consider the possession of cannabis, for personal use, a minor offense with possibility of incarceration. Despite of the model of legal supply (i.e., Spanish cannabis clubs, Netherlands coffee shops) or medical use (i.e., Italy), cannabis remains the most used and trafficked illicit plant in the European Union. Differentiating cannabis crops or tracing the biogeographical origin is crucial for law enforcement purposes. Chloroplast DNA (cpDNA) markers may assist to determine biogeographic origin and to differentiate hemp from marijuana. This research aims: to identify and to evaluate nine C. sativa cpDNA polymorphic SNP sites to differentiate crop type and to provide information about its biogeographical origin. Five SNaPshot™ assays for nine chloroplast markers were developed and conducted in marijuana samples seized in Chile, the USA-Mexico border and Spain, and hemp samples grown in Spain and in Italy. The SNapShot™ assays were tested on 122 cannabis samples, which included 16 blind samples, and were able to differentiate marijuana crop type from hemp crop type in all samples. Using phylogenetic analysis, genetic differences were observed between marijuana and hemp samples. Moreover, principal component analysis (PCA) supported the relationship among hemp samples, as well as for USA-Mexico border, Spanish, and Chilean marijuana samples. Genetic differences between groups based on the biogeographical origin and their crop type were observed. Increasing the number of genetic markers, including the most recently studied ones, and expanding the sample database will provide more accurate information about crop differentiation and biogeographical origin.

A comprehensive review on hempseed protein: Production, functional and nutritional properties, novel modification methods, applications, and limitations

With the global population on the rise, challenges in meeting protein demands are amplified by recent crises, prompting a swift shift to alternative protein sources due to disruptions in the supply chain. Plant-based proteins are gaining momentum due to economic, cultural, and environmental considerations, aligning with the preference for sustainable diets and resulting in more affordable plant-based products. The distinction between drug and industrial hemp fuels demand for its nutritional value, digestibility, low allergenicity, and bioactive properties. Industrial hempseed, featuring minimal Δ9-Tetrahydrocannabinol (THC) content (<0.2 %), emerges as a promising crop, offering high-quality protein and oil. The de-oiled hempseed cake stands as an eco-friendly and promising protein source enriched with phenolic compounds and fiber. Ongoing research seeks to enhance techno-functional properties of hempseed protein, surmounting initial limitations for integration into various foods. A range of techniques, both conventional and innovative, optimize protein characteristics, while modifying plant-based protein structures augments their application potential. Modification approaches like ultrasound, high-pressure homogenization, conjugation, complexation, fibrillization, and enzymatic methods enhance hempseed protein functionality. The review critically evaluates the techno-functional attributes of hempseed protein and explores strategies for customization through structural modifications. Lastly, the review assesses its composition, potential as a plant-based source, addresses challenges, and discusses strategies for enhanced functionality.

Cannabinoids in Periodontology: Where Are We Now?

INTRODUCTION

Cannabinoids are a well-documented treatment modality for various immune and inflammatory diseases, including asthma, chronic obstructive pulmonary disease, Crohn's disease, arthritis, multiple sclerosis, and a range of neurodegenerative conditions. However, limited information is available regarding the therapeutic potential of cannabinoids in treating periodontal disease.

OBJECTIVE

The objective of this study is to analyze the current evidence on the antibacterial and immunomodulatory effects of cannabis and its role in the healing and regeneration processes within periodontal tissues.

RESULTS

This review discusses the potential role of cannabinoids in restoring periodontal tissue homeostasis.

CONCLUSIONS

The examination of the endocannabinoid system and the physiological effects of cannabinoids in the periodontium suggests that they possess immunomodulatory and antibacterial properties, which could potentially promote proper tissue healing and regeneration.

Aqueous Extracts from Hemp Seeds as a New Weapon against Staphylococcus epidermidis Biofilms

This study investigated the antibiofilm activity of water-soluble extracts obtained under different pH conditions from Cannabis sativa seeds and from previously defatted seeds. The chemical composition of the extracts, determined through GC-MS and NMR, revealed complex mixtures of fatty acids, monosaccharides, amino acids and glycerol in ratios depending on extraction pH. In particular, the extract obtained at pH 7 from defatted seeds (Ex7d) contained a larger variety of sugars compared to the others. Saturated and unsaturated fatty acids were found in all of the analysed extracts, but linoleic acid (C18:2) was detected only in the extracts obtained at pH 7 and pH 10. The extracts did not show cytotoxicity to HaCaT cells and significantly inhibited the formation of Staphylococcus epidermidis biofilms. The exception was the extract obtained at pH 10, which appeared to be less active. Ex7d showed the highest antibiofilm activity, i.e., around 90%. Ex7d was further fractionated by HPLC, and the antibiofilm activity of all fractions was evaluated. The 2D-NMR analysis highlighted that the most active fraction was largely composed of glycerolipids. This evidence suggested that these molecules are probably responsible for the observed antibiofilm effect but does not exclude a possible synergistic contribution by the other components.

Antimicrobial Activity of Frankincense (Boswellia sacra) Oil and Smoke against Pathogenic and Airborne Microbes

As they continuously evolve, plants will remain a renewable source for antimicrobial compounds. Omani frankincense is produced by B. sacra trees and is graded into Hojari, Nejdi, Shazri or Sha'bi. Air can be a source for pathogenic or food spoilage microbes; thus, inactivating airborne microbes is necessary in environments such as food and animal production areas. This study investigated the antimicrobial activity and the chemistry of steam-distilled oils of Hojari and Sha'bi grades. It also analyzed the antimicrobial activity of frankincense smoke and the size of its solid particles. Chemical analysis was performed using gas chromatography mass spectrometry (GC-MS). The antimicrobial activity of the oils against Staphylococcus aureus (NCTC 6571), Bacillus spp., Escherichia coli (NCTC 10418), Pseudomonas aeruginosa (NCTC 10662), Saccharomyces cerevisiae, Candida albicans, Aspergillus flavus, Aspergillus ochraceus, Aspergillus niger, Penicillium citrinum, Alternaria alternata and Fusarium solani was determined using well diffusion and micro-well dilution methods. A microscopic technique was used to determine the size of frankincense smoke solid particles. Microbes were exposed to frankincense smoke to test their susceptibility to the smoke. Hojari and Sha'bi oils were similar in composition and contained monoterpenes and sesquiterpenes. The Hojari and the Sha'bi oils possessed broad spectrum antimicrobial activity. The largest growth inhibition zones were obtained with S. cerevisiae and F. solani. An MIC of 1.56% (v/v) was found with E. coli, S. cerevisiae and F. solani. Frankincense smoke contained fine irregular solid particles with a diameter range of 0.8-2287.4 µm, and thus may pose a health risk to susceptible individuals. The smoke had potent antimicrobial activity against S. aureus, E. coli, and airborne bacteria, yeast and mold, with a maximum inhibition of 100%. It was concluded that Hojari and Sha'bi frankincense oils and smoke had significant antimicrobial activity that can be exploited in controlling human, animal and plant pathogenic microbes.

Phytochemistry, Biological, and Pharmacological Properties of Abies alba Mill

Abies alba Mill. (Pinaceae), silver fir, is a widespread gymnosperm species in Europe, important for its ecological, economic, social, and cultural significance, as well as for its use for food and bioremediation purposes. The various parts of the plant (leaves, branches, cones, wood, bark) are also of pharmaceutical interest due to their composition of active compounds. In the last three decades, an impressive amount of research has been dedicated to this species. The variability of the chemical composition of essential oils (whether they come from leaves, oleoresin from branches, or other parts of the plant) is impressive, even in the case of specimens collected from the same geographical area. For essential oils prepared from needles or twigs and branches, limonene, β-pinene, α-pinene, camphene, β-phellandrene, and bornyl acetate are the leading compounds, although their wide variations seem to correspond to multiple chemotypes. Both bark and wood are rich in lignans and phenolic compounds. Matairesinol is apparently the dominant lignan in bark, and secoisolariciresinol and lariciresinol are the dominant ones in wood samples. Pharmacological studies with promising results have evaluated the antioxidant effect (mainly due to essential oils), but also the antimicrobial, antitumor, probiotic, antidiabetic, anti-steatosis, and anti-psoriatic activities.

Phytochemical Composition and Antioxidant Activity of Various Extracts of Fibre Hemp (Cannabis sativa L.) Cultivated in Lithuania

The phytochemistry of fibre hemp (Cannabis sativa L., cv. Futura 75 and Felina 32) cultivated in Lithuania was investigated. The soil characteristics (conductivity, pH and major elements) of the cultivation field were determined. The chemical composition of hemp extracts and essential oils (EOs) from different plant parts was determined by the HPLC/DAD/TOF and GC/MS techniques. Among the major constituents, β-caryophyllene (≤46.64%) and its oxide (≤14.53%), α-pinene (≤20.25%) or α-humulene (≤11.48) were determined in EOs. Cannabidiol (CBD) was a predominant compound (≤64.56%) among the volatile constituents of the methanolic extracts of hemp leaves and inflorescences. Appreciable quantities of 2-monolinolein (11.31%), methyl eicosatetraenoate (9.70%) and γ-sitosterol (8.99%) were detected in hemp seed extracts. The octadecenyl ester of hexadecenoic acid (≤31.27%), friedelan-3-one (≤21.49%), dihydrobenzofuran (≤17.07%) and γ-sitosterol (14.03%) were major constituents of the methanolic extracts of hemp roots, collected during various growth stages. The CBD quantity was the highest in hemp flower extracts in pentane (32.73%). The amounts of cannabidiolic acid (CBDA) were up to 24.21% in hemp leaf extracts. The total content of tetrahydrocannabinol (THC) isomers was the highest in hemp flower pentane extracts (≤22.43%). The total phenolic content (TPC) varied from 187.9 to 924.7 (average means, mg/L of gallic acid equivalent (GAE)) in aqueous unshelled hemp seed and flower extracts, respectively. The TPC was determined to be up to 321.0 (mg/L GAE) in root extracts. The antioxidant activity (AA) of hemp extracts and Eos was tested by the spectrophotometric DPPH^● scavenging activity method. The highest AA was recorded for hemp leaf EOs (from 15.034 to 35.036 mmol/L, TROLOX equivalent). In the case of roots, the highest AA (1.556 mmol/L, TROLOX) was found in the extracts of roots collected at the seed maturation stage. The electrochemical (cyclic and square wave voltammetry) assays correlated with the TPC. The hydrogen-peroxide-scavenging activity of extracts was independent of the TPC.

Relationship Between Recreational Cannabis Use and Helicobacter pylori Infection

Background: Cannabis plant extracts suppress gastric acid secretion and inflammation, and promote gastroduodenal ulcer healing, all of which are triggered by Helicobacter Pylori infection (HPI). Here, we evaluate the association between cannabis use and HPI among a representative community sample. Materials and Methods: We identified respondents who completed cannabis use questions and were tested for HPI (H. pylori IgG antibody seropositivity) from the National Health and Nutrition Examination Survey III dataset (n=4556). Cannabis usage was categorized as ever-use (ever, never), cumulative lifetime use (>10-times, 1-10-times, never), or recent use (>31-days-ago, within-31-days, never). We calculated the crude and adjusted risk (prevalence rate ratio, cPRR and aPRR) of having HPI with cannabis use using generalized Poisson models (SAS 9.4). The models were adjusted for demographics and risk factors for HPI. Results: The prevalence of HPI was lower among ever versus never cannabis users (18.6% vs. 33%, p<0.0001). Cannabis use was associated with a decreased risk of HPI (cPRR: 0.56 confidence interval [95% CI: 0.47-0.67]; p<0.0001), which persisted after adjusting for demographics (aPRR: 0.75 [95% CI: 0.63-0.90]; p=0.0016) and comorbidities (aPRR: 0.79 [95% CI: 0.66-0.95]; p=0.0145). Further, individuals with >10-times lifetime cannabis use had a decreased risk of HPI compared with those with 1-10-times lifetime use (aPRR: 0.70 [95% CI: 0.55-0.89]; p=0.0011) and never-users (aPRR: 0.65 [95% CI: 0.50-0.84]; p=0.0002). Conclusion: Recreational cannabis use is associated with diminished risk of HPI. These observations suggest the need for additional research assessing the effects of medical cannabis formulations on HPI.

Effect of Genotype, Year, and Their Interaction on the Accumulation of Bioactive Compounds and the Antioxidant Activity in Industrial Hemp (Cannabis sativa L.) Inflorescences

The phytochemical content and the antioxidant activity in the inflorescences of six industrial hemp (Cannabis sativa L.) genotypes, four monoecious (Codimono, Carmaleonte, Futura 75, and Santhica 27), and two dioecious (Fibrante and Carmagnola Selezionata), were assessed for three consecutive years from 2018 to 2020. The total phenolic content, total flavonoid content, and antioxidant activity were determined by spectrophotometric measurements, whereas HPLC and GC/MS were used to identify and quantify the phenolic compounds, terpenes, cannabinoids, tocopherols, and phytosterols. All the measured traits were significantly affected by genotype (G), cropping year (Y), and their interaction (G × Y), although the Y effect prevailed as a source of variation, ranging from 50.1% to 88.5% for all the metabolites except cannabinoids, which were equally affected by G, Y, and G × Y interaction (33.9%, 36.5%, and 21.4%, respectively). The dioecious genotypes presented a more constant performance over the three years compared to the monoecious genotypes, with the highest and most stable phytochemical content observed in the inflorescences of Fibrante, which was characterized by the highest levels of cannabidiol, α-humulene and β-caryophyllene, which may confer on the inflorescences of this genotype a great economic value due to the important pharmacological properties of these metabolites. Conversely, the inflorescences of Santhica 27 were characterized by the lowest accumulation of phytochemicals over the cropping years, with the notable exception of cannabigerol, a cannabinoid that exhibits a wide range of biological activities, which was found at its highest level in this genotype. Overall, these findings can be used by breeders in future programs aimed at the selection of new hemp genotypes with improved levels of phytochemicals in their inflorescences, which can provide better health and industrial benefits.

Caiman's fat enriched with n-3 fatty acids: potential food supplement

Broad-snouted caiman (Caiman latirostris) products (meat, fat and oil) are currently beginning to be valued as a food of special interest due to its high content of n-3 fatty acids. Thus, the objective of this study was to characterize the fats of caiman fed with diets enriched with flaxseeds (Linus usitatissimun) rich in n-3 fatty acids, lignans and antioxidants. Caimans were fed six days a week with: a control diet (C), and a diet enriched with ground flaxseed = 90% C + 10% flaxseed ground (FS), during 30 (FS30) and 60 (FS60) days. Animals fed the flaxseed-enriched diets increased linolenic acid content and reduced the n-6/n-3 ratio of fats relative to controls, and this improvement increased over time. The proportion of eicosapentaenoic acid also increased, but there was no difference at the time the enriched diets were offered. Caiman fat of the FS30 and FS60, showed a decrease in lipoperoxidation (24% and 40%) and reactive oxygen species (44% and 76%) accompanied by an increase in antioxidant systems. Consumption of a flax-enriched diet by caimans increases the content of essential fatty acids and improves the lipoperoxidative status of fat. This provides an enriched fat with potential for the development products for human consumption.

Extraction techniques for bioactive compounds of cannabis

Historically, cannabis has always constituted a component of the civilized world; archaeological discoveries indicate that it is one of the oldest crops, while, up until the 19th century, cannabis fibers were extensively used in a variety of applications, and its seeds comprised a part of human and livestock nutrition. Additional evidence supports its exploitation for medicinal purposes in the ancient world. The cultivation of cannabis gradually declined as hemp fibers gave way to synthetic fibers, while the intoxicating ability of THC eventually overshadowed the extensive potential of cannabis. Nevertheless, the proven value of certain non-intoxicating cannabinoids, such as CBD and CBN, has recently given rise to an entire market which promotes cannabis-based products. An increase in the research for recovery and exploitation of beneficial cannabinoids has also been observed, with more than 10 000 peer-reviewed research articles published annually. In the present review, a brief overview of the history of cannabis is given. A look into the classification approaches of cannabis plants/species as well as the associated nomenclature is provided, followed by a description of their chemical characteristics and their medically valuable components. The application areas could not be absent from the present review. Still, the main focus of the review is the discussion of work conducted in the field of extraction of valuable bioactive compounds from cannabis. We conclude with a summary of the current status and outlook on the topics that future research should address.

Biosynthesis of Phytocannabinoids and Structural Insights: A Review

Cannabis belongs to the family Cannabaceae, and phytocannabinoids are produced by the Cannabis sativa L. plant. A long-standing debate regarding the plant is whether it contains one or more species. Phytocannabinoids are bioactive natural products found in flowers, seeds, and fruits. They can be beneficial for treating human diseases (such as multiple sclerosis, neurodegenerative diseases, epilepsy, and pain), the cellular metabolic process, and regulating biological function systems. In addition, several phytocannabinoids are used in various therapeutic and pharmaceutical applications. This study provides an overview of the different sources of phytocannabinoids; further, the biosynthesis of bioactive compounds involving various pathways is elucidated. The structural classification of phytocannabinoids is based on their decorated resorcinol core and the bioactivities of naturally occurring cannabinoids. Furthermore, phytocannabinoids have been studied in terms of their role in animal models and antimicrobial activity against bacteria and fungi; further, they show potential for therapeutic applications and are used in treating various human diseases. Overall, this review can help deepen the current understanding of the role of biotechnological approaches and the importance of phytocannabinoids in different industrial applications.

Green method of conversion of geraniol to value-added products in the presence of selected minerals

The study presents the results of research on the process of geraniol (GA) transformation in the presence of natural minerals: montmorillonite, mironekuton, halloysite and also in the presence of halloysite modified with 0.1 M water solution of H2SO4. To obtain information on the structure of the used catalysts, instrumental studies were performed (SEM, XRD, FT-IR, XRF, BET). The second part of the research consisted in examining the influence of individual parameters (temperature, catalyst content, and reaction time) on the course of GA transformation process. The syntheses were carried out without the application of solvent and under atmospheric pressure. To determine the most beneficial process conditions, two functions were selected: GA conversion and selectivity of GA. The proposed method of GA transformation on such minerals: montmorillonite, mironekuton, halloysite, has not been described in the literature so far.

Development and validation of a fit-for-purpose UHPLC-ESI-MS/MS method for the quantitation of cannabinoids in different matrices

Several cannabinoids (cannabidivarin (CBDV), cannabigerol (CBG), cannabidiol (CBD), cannabinol (CBN) and cannabichromene (CBC)) and ethanol hemp extract are being used in primary human hepatocytes (PHH), Caenorhabditis elegans (C. elegans) and in vitro buccal membrane absorption models to elucidate their potential toxicological mechanisms, evaluate their oromucosal absorption, and to identify their metabolites. William's E medium, C. elegans habitation medium (CeHM), and HEPES-buffered hanks' balanced salt solution (HHBSS) are matrices used with these predictive test systems. Therefore, we developed and validated a sensitive fit-for-purpose ultra-high performance liquid chromatography-electrospray-tandem mass spectrometry (UHPLC-ESI-MS/MS) method for the quantitation of CBDV, CBG, CBD, CBN, and CBC in extracellular matrices used with these models for the first time. The separation of the analytes was performed on a Waters ACQUITY UPLC BEH C18 column (130 Å, 1.7 μm, 2.1 × 100 mm) protected with a Waters ACQUITY UPLC BEH C18 guard column (130 Å, 1.7 μm, 2.1 × 5 mm). Positive electrospray ionization and multiple reaction monitoring (MRM) modes were used. Under the developed experimental conditions, good linearities were obtained over the concentration range of 0.025-40 µg/ml with coefficients of determination (R²) varying from 0.9953 to 0.9998. The intra-day precisions were between 0.5 and 9.6% with accuracies within ± 16.7%, and the inter-day precisions ranged from 0.6 to 13.1 % with accuracies within ± 13.7%. The method recoveries were between 85.8 and 105.1%. In addition, time-consuming sample preparation was avoided by applying a simple and efficient extraction procedure, which meets the need for potential large-scale routine analysis. The described method was successfully applied to quantitate the analytes in samples produced with different models as well as in ethanolic hemp extract.

Antimicrobial and Cytotoxic Effects of Cannabinoids: An Updated Review with Future Perspectives and Current Challenges

The development of new antibiotics is urgently needed to combat the threat of bacterial resistance. New classes of compounds that have novel properties are urgently needed for the development of effective antimicrobial agents. The extract of Cannabis sativa L. has been used to treat multiple ailments since ancient times. Its bioactivity is largely attributed to the cannabinoids found in its plant. Researchers are currently searching for new anti-infective agents that can treat various infections. Although its phytocannabinoid ingredients have a wide range of medical benefits beyond the treatment of infections, they are primarily associated to psychotropic effects. Different cannabinoids have been demonstrated to be helpful against harmful bacteria, including Gram-positive bacteria. Moreover, combination therapy involving the use of different antibiotics has shown synergism and broad-spectrum activity. The purpose of this review is to gather current data on the actions of Cannabis sativa (C. sativa) extracts and its primary constituents such as terpenes and cannabinoids towards pathogens in order to determine their antimicrobial properties and cytotoxic effects together with current challenges and future perspectives in biomedical application.

Herbal Arsenal against Skin Ailments: A Review Supported by In Silico Molecular Docking Studies

Maintaining healthy skin is important for a healthy body. At present, skin diseases are numerous, representing a major health problem affecting all ages from neonates to the elderly worldwide. Many people may develop diseases that affect the skin, including cancer, herpes, and cellulitis. Long-term conventional treatment creates complicated disorders in vital organs of the body. It also imposes socioeconomic burdens on patients. Natural treatment is cheap and claimed to be safe. The use of plants is as old as mankind. Many medicinal plants and their parts are frequently used to treat these diseases, and they are also suitable raw materials for the production of new synthetic agents. A review of some plant families, viz., Fabaceae, Asteraceae, Lamiaceae, etc., used in the treatment of skin diseases is provided with their most common compounds and in silico studies that summarize the recent data that have been collected in this area.

Terpenes and Cannabinoids in Supercritical CO2 Extracts of Industrial Hemp Inflorescences: Optimization of Extraction, Antiradical and Antibacterial Activity

Natural products are increasingly in demand in dermatology and cosmetology. In the present study, highly valuable supercritical CO₂ (sCO₂) extracts rich in bioactive compounds with antiradical and antibacterial activity were obtained from the inflorescences of industrial hemp. Volatile compounds were analyzed by gas chromatography in tandem with mass spectrometry (GC-MS), while cannabinoids were determined by high performance liquid chromatography (HPLC-DAD). Extraction yields varied from 0.75 to 8.83%, depending on the pressure and temperature applied. The extract obtained at 320 bar and 40 °C with the highest content (305.8 µg mg^-1) of cannabidiolic acid (CBDA) showed the best antiradical properties. All tested extract concentrations from 10.42 µg mL^-1 to 66.03 µg mL^-1 possessed inhibitory activities against E. coli, P. aeruginosa, B. subtilis, and S. aureus. The sCO₂ extract with the highest content of cannabidiol (CBD) and rich in α-pinene, β-pinene, β-myrcene, and limonene was the most effective. The optimal conditions for sCO₂ extraction of cannabinoids and volatile terpenes from industrial hemp were determined. The temperature of 60 °C proved to be optimal for all responses studied, while the pressure showed a different effect depending on the compounds targeted. A low pressure of 131.2 bar was optimal for the extraction of monoterpenes, while extracts rich in sesquiterpenes were obtained at 319.7 bar. A high pressure of 284.78 bar was optimal for the extraction of CBD.

Terpenes and Cannabinoids Yields and Profile from Direct-Seeded and Transplanted CBD-Cannabis sativa

Following recent legalization, the production of hemp (Cannabis sativa L.) for high-value plant compounds became a major crop in many countries across the world. In this study, we profiled popular plant compounds being extracted for emerging markets, terpenes and cannabinoids, developed in two different planting systems of a single, high-cannabidiol (CBD), low-Δ⁹-tetrahydrocannabinol (Δ⁹-THC), dioecious hemp cultivar 'Culver' in central Oregon, U.S.A. One system is the current conventional system of an open, all-female, clonal transplant (OFCT) production system. This is compared to a dioecious, densely seeded (DDS) production system. Overall, the essential oil (EO, chiefly terpenes) and cannabinoid profiles of plants harvested from the two systems were comparable. In comparison to the DDS plots, the EO obtained from colas of the OFCT plots had higher concentrations of α-pinene, myrcene, limonene, β-bisabolene, γ-cadinene, caryophyllene oxide, guaiol, 10-epi-γ-eudesmol, β-eudesmol, bulnesol, epi-α-bisabolol, α-humulene, and CBD, although lower concentrations of 1,8-cineole, (E)-caryophyllene, γ-elemene, α-selinene, selina-4(15),7(11)-diene, selina-3,7(11)-diene, and germacrene B. Of the various plant parts (female leaves and chaff, male flowers) tested in the DDS plots, the highest EO yield was obtained from the chaff. The main EO constituents of female leaves were (E)-caryophyllene (14-21%), caryophyllene oxide (13-16%), α-humulene (5-6%), humulene epoxide II (3.5-3.8%), epi-α-bisabolol (2.7-5.5%), CBD, and α-eudesmol (1.1-2.6%). The principal EO constituents of female chaff from the DDS system were (E)-caryophyllene (∼21%), α-humulene (6.6%), β-selinene (4.5%), α-selinene (3.6%), selina-3,7(11)-diene (9.8%), selina-4(15),7(11)-diene (6.3%), caryophyllene oxide (5.2%), and cannabichromene (3.1%). The major EO constituents of the male flowers were CBD (19.3%), caryophyllene oxide (11%), α-humulene (4.1%), epi-α-bisabolol (3.9%), selina-3,7(11)-diene (3.4%), and β-selinene (3.4%). Cannabinoids were not detected in the EO distilled for 30 min, but they were present in the EO from 240 min of distillation. The EO content of female leaves and male flowers was relatively low, whereas the EO content of the female chaff from the DDS system was significantly greater. Breaking with conventional knowledge, the EO of male flowers may accumulate up to 19% CBD. Distillation of plants from both production systems converted CBD-A to CBD, CBDV-A to CBDV, CBG-A to CBG, and THC-A to THC as a result of the thermal decarboxylation of acidic cannabinoids but otherwise did not affect the total cannabinoid content. Most of the cannabinoids remained in the distilled biomass after the extraction of terpenes (EO). Therefore, the distilled, terpene-free biomass represents a high-value product that could be further extracted for cannabinoids or used as a component in various products.

The Antimicrobial Properties of Cannabis and Cannabis-Derived Compounds and Relevance to CB2-Targeted Neurodegenerative Therapeutics

Cannabinoid receptor 2 (CB2) is of interest as a much-needed target for the treatment or prevention of several neurogenerative diseases. However, CB2 agonists, particularly phytocannabinoids, have been ascribed antimicrobial properties and are associated with the induction of microbiome compositional fluxes. When developing novel CB2 therapeutics, CB2 engagement and antimicrobial functions should both be considered. This review summarizes those cannabinoids and cannabis-informed molecules and preparations (CIMPs) that show promise as microbicidal agents, with a particular focus on the most recent developments. CIMP–microbe interactions and anti-microbial mechanisms are discussed, while the major knowledge gaps and barriers to translation are presented. Further research into CIMPs may proffer novel direct or adjunctive strategies to augment the currently available antimicrobial armory. The clinical promise of CIMPs as antimicrobials, however, remains unrealized. Nevertheless, the microbicidal effects ascribed to several CB2 receptor-agonists should be considered when designing therapeutic approaches for neurocognitive and other disorders, particularly in cases where such regimens are to be long-term. To this end, the potential development of CB2 agonists lacking antimicrobial properties is also discussed.

Antibacterial, Antibiofilm, and Antioxidant Activity of 15 Different Plant-Based Natural Compounds in Comparison with Ciprofloxacin and Gentamicin

Plant-based natural compounds (PBCs) are comparatively explored in this study to identify the most effective and safe antibacterial agent/s against six World Health Organization concern pathogens. Based on a contained systematic review, 11 of the most potent PBCs as antibacterial agents are included in this study. The antibacterial and antibiofilm efficacy of the included PBCs are compared with each other as well as common antibiotics (ciprofloxacin and gentamicin). The whole plants of two different strains of Cannabis sativa are extracted to compare the results with sourced ultrapure components. Out of 15 PBCs, tetrahydrocannabinol, cannabidiol, cinnamaldehyde, and carvacrol show promising antibacterial and antibiofilm efficacy. The most common antibacterial mechanisms are explored, and all of our selected PBCs utilize the same pathway for their antibacterial effects. They mostly target the bacterial cell membrane in the initial step rather than the other mechanisms. Reactive oxygen species production and targeting [Fe-S] centres in the respiratory enzymes are not found to be significant, which could be part of the explanation as to why they are not toxic to eukaryotic cells. Toxicity and antioxidant tests show that they are not only nontoxic but also have antioxidant properties in Caenorhabditis elegans as an animal model.

Hemp (Cannabis sativa L., Kompolti cv.) and Hop (Humulus lupulus L., Chinook cv.) Essential Oil and Hydrolate: HS-GC-MS Chemical Investigation and Apoptotic Activity Evaluation

In this study, essential oils (EOs) and hydrolates (Hys) from Italian hemp (Cannabis sativa L. Kompolti cv.) and hop (Humulus Lupulus L., Chinook cv.) supply chains were chemically characterized and tested to investigate their apoptotic potential for the first time. Headspace–Gas Chromatography–Mass Spectrometry (HS-GC-MS) techniques were performed to describe their volatile chemical profile, highlighting a composition rich in terpene derivatives such as monoterpenes and sesquiterpenes among which β-myrcene, limonene, β-caryophyllene and α-humulene were the main constituents of EOs; in contrast, linalool, cis-p-menth-2,8-dien-1-ol, terpinen-4-ol, α-terpineol, caryophyllene oxide, and τ-cadinol were found in the Hys. The cytotoxicity activity on human leukemia cells (HL60), human neuroblastoma cells (SH-SY5Y), human metastatic adenocarcinoma breast cells (MCF7), human adenocarcinoma breast cells (MDA), and normal breast epithelial cell (MCF10A) for the EOs and Hys was studied by MTT assay and cytofluorimetric analysis and scanning and transmission electron microscopy were performed to define ultrastructural changes and the mechanism of cells death for HL 60 cells. An induction of the apoptotic mechanism was evidenced for hemp and hop EOs after treatment with the corresponding EC₅₀ dose. In addition, TEM and SEM investigations revealed typical characteristics induced by the apoptotic pathway. Therefore, thanks to the integration of the applied methodologies with the used techniques, this work provides an overview on the metabolomic profile and the apoptotic potential of hemp and hop EOs and, for the first time, also of Hys. The findings of this preliminary study confirm that the EOs and Hys from Cannabis and Humulus species are sources of bioactive molecules with multiple biological effects yet to be explored.

Cosmeceuticals: A Newly Expanding Industry in South Africa

Africa is counted amongst the cosmetic market contributors; however, South Africa’s remarkable plant diversity is still largely untapped in terms of its potential for medicinal and cosmetic purposes. Thus, we aim to provide a critical assessment of the advancements made in South African cosmeceuticals with emphasis towards online local companies/brands that are manufactured by small, medium and micro enterprises (SMMEs). For the current study, we limited our search of herbal cosmeceutical products to SMMEs with online websites, or products traded in other online cosmetic directories such as ‘Faithful to Nature’ and ‘African Botanicals’ using a simple Google search. We recorded more than 50 South African SMME companies/brands involved in the trade of cosmeceuticals. Skin and hair care were the major product categories widely traded in these online platforms. Furthermore, few patents were recorded from South African researchers and institutions thereof, which is quite alarming considering the extensive research that has been undertaken to study these commercially valuable plants. Based on the increasing number of new products and the wide pool of economically important plants coupled to their associated rich indigenous knowledge systems, the cosmeceutical sector can contribute to the economy, job creation, entrepreneurship skills, socio-economic development and intellectual property generation.

Effect of harvest time on the compositional changes in essential oils, cannabinoids, and waxes of hemp (Cannabis sativa L.)

Demand for cannabinoid is growing, with the global market expected to reach $9.69 billion by 2025. Understanding how chemical composition changes in hemp at different harvest times is crucial to maximizing this industrial crop value. Important compositional changes in three different compound classes (essential oils, cannabinoids, and lipids) from inflorescences (tops), leaves, and stems of hemp (Cannabis sativa L., Finola variety) at different harvesting stages have been investigated. Over 85% of the total extracts from the tops were cannabinoids, while leaves demonstrated the greatest quantities of wax ester and sterols. Essential oil and cannabinoid increased in tops until full flowering (third harvest), reaching 2030 µg g^-1 and 39 475 µg g^-1, respectively. Cannabinoids decreased at seed maturity (final harvest) to 26 969 µg g^-1. This demonstrates the importance of early harvesting to maximize cannabidiol (CBD), which is highly sought after for its therapeutic and pharmacological properties. A total of 21 161 µg g^-1 of CBD was extracted from the tops at full flowering (third harvest); however, a significant increase (63%) in the banned psychoactive tetrahydrocannabinol (THC) was observed from budding (157 µg g^-1 of biomass) to the full flowering (9873 µg g^-1 of biomass). Harvesting the tops after budding is preferable due to the high CBD content and low amounts of THC.

Direct In Vivo Analysis of CBD- and THC-Acid Cannabinoids and Classification of Cannabis Cultivars Using SpiderMass

In recent years, cannabis and hemp-based products have become increasingly popular for recreational use, edibles, beverages, health care products, and medicines. The rapid detection and differentiation of phytocannabinoids is, therefore, essential to assess the potency and the therapeutic and nutritional values of cannabis cultivars. Here, we implemented SpiderMass technology for in vivo detection of cannabidiolic acid (CBDA) and ∆9-tetrahydrocannabinolicacid (∆9-THCA), and other endogenous organic plant compounds, to access distribution gradients within the plants and differentiate between cultivars. The SpiderMass system is composed of an IR-laser handheld microsampling probe connected to a mass spectrometer through a transfer tube. The analysis was performed on different plant organs from freshly cultivated cannabis plants in only a few seconds. SpiderMass analysis easily discriminated the two acid phytocannabinoid isomers via MS/MS, and the built statistical models differentiated between four cannabis cultivars. Different abundancies of the two acid phytocannabinoids were found along the plant as well as between different cultivars. Overall, these results introduce direct analysis by SpiderMass as a compelling analytical alternative for rapid hemp analysis.

Antinociceptive effects of minor cannabinoids, terpenes and flavonoids in Cannabis

Cannabis has been used for centuries for its medicinal properties. Given the dangerous and unpleasant side effects of existing analgesics, the chemical constituents of Cannabis have garnered significant interest for their antinociceptive, anti-inflammatory and neuroprotective effects. To date, Δ9-tetrahydrocannabinol (THC) and cannabidiol (CBD) remain the two most widely studied constituents of Cannabis in animals. These studies have led to formulations of THC and CBD for human use; however, chronic pain patients also use different strains of Cannabis (sativa, indica and ruderalis) to alleviate their pain. These strains contain major cannabinoids, such as THC and CBD, but they also contain a wide variety of cannabinoid and noncannabinoid constituents. Although the analgesic effects of Cannabis are attributed to major cannabinoids, evidence indicates other constituents such as minor cannabinoids, terpenes and flavonoids also produce antinociception against animal models of acute, inflammatory, neuropathic, muscle and orofacial pain. In some cases, these constituents produce antinociception that is equivalent or greater compared to that produced by traditional analgesics. Thus, a better understanding of the extent to which these constituents produce antinociception alone in animals is necessary. The purposes of this review are to (1) introduce the different minor cannabinoids, terpenes, and flavonoids found in Cannabis and (2) discuss evidence of their antinociceptive properties in animals.

A Comprehensive Phytochemical Analysis of Terpenes, Polyphenols and Cannabinoids, and Micromorphological Characterization of 9 Commercial Varieties of Cannabis sativa L

New hemp (Cannabis sativa L.) strains developed by crossbreeding selected varieties represent a novel research topic worthy of attention and investigation. This study focused on the phytochemical characterization of nine hemp commercial cultivars. Hydrodistillation was performed in order to collect the essential oils (EO), and also the residual water and deterpenated biomass. The volatile fraction was analyzed by GC-FID, GC-MS, and SPME-GC-MS, revealing three main chemotypes. The polyphenolic profile was studied in the residual water and deterpenated biomass by spectrophotometric assays, and HPLC-DAD-MSn and 1H-NMR analyses. The latter were employed for quali-quantitative determination of cannabinoids in the deterpenated material in comparison with the one not subjected to hydrodistillation. In addition, the glandular and non-glandular indumentum of the nine commercial varieties was studied by means of light microscopy and scanning electron microscopy in the attempt to find a possible correlation with the phytochemical and morphological traits. The EO and residual water were found to be rich in monoterpene and sesquiterpene hydrocarbons, and flavonol glycosides, respectively, while the deterpenated material was found to be a source of neutral cannabinoids. The micromorphological survey allowed us to partly associate the phytochemistry of these varieties with the hair morphotypes. This research sheds light on the valorization of different products from the hydrodistillation of hemp varieties, namely, essential oil, residual water, and deterpenated biomass, which proved to be worthy of exploitation in industrial and health applications.

Conversion of Geraniol into Useful Value-Added Products in the Presence of Catalysts of Natural Origin: Diatomite and Alum

This article presents research related to the transformation of geraniol (GA), leading to the formation of products with very valuable properties. In the planned method, heterogeneous catalysts of natural origin in the form of alum and diatomite were used as catalysts. Initially, the process which we investigated was the process of isomerization of GA, but it turned out during the studies that GA is also transformed in other reactions. Before catalytic tests, these two minerals were subjected to detailed instrumental analyses using the following methods: XRD, SEM/EDX, XRF and FTIR, which allowed to obtain their full morphological characteristics. During the catalytic tests, the influence of such relevant parameters on the GA transformations was determined: temperature from 80 to 150 °C, catalyst content from 5 to 15% by weight and the reaction time from 15 min to 24 h. The tests presented in the article were carried out under atmospheric pressure (in air) as well as without the use of a solvent. The optimal conditions for the transformations of GA were determined on the basis of its conversion and selectivities of transformation to the main products in the form of: beta-pinene (BP), 6,11-dimethyl-2,6,10-dodecatriene-1-ol (DC) and thumbergol (TH). The above products were formed with the highest selectivity, respectively: 100 mol%, 50 mol% and 52 mol%. The results of the syntheses showed that for GA the best transformation results were obtained at the temperature of 80 °C (for both tested catalysts), with the catalyst content of 1 wt % (for both tested catalysts) and for the reaction time of 1 h (for diatomite)) and 3 h (for alum).

Anti-Microbial Activity of Phytocannabinoids and Endocannabinoids in the Light of Their Physiological and Pathophysiological Roles

Antibiotic resistance has become an increasing challenge in the treatment of various infectious diseases, especially those associated with biofilm formation on biotic and abiotic materials. There is an urgent need for new treatment protocols that can also target biofilm-embedded bacteria. Many secondary metabolites of plants possess anti-bacterial activities, and especially the phytocannabinoids of the Cannabis sativa L. varieties have reached a renaissance and attracted much attention for their anti-microbial and anti-biofilm activities at concentrations below the cytotoxic threshold on normal mammalian cells. Accordingly, many synthetic cannabinoids have been designed with the intention to increase the specificity and selectivity of the compounds. The structurally unrelated endocannabinoids have also been found to have anti-microbial and anti-biofilm activities. Recent data suggest for a mutual communication between the endocannabinoid system and the gut microbiota. The present review focuses on the anti-microbial activities of phytocannabinoids and endocannabinoids integrated with some selected issues of their many physiological and pharmacological activities.

Development and Optimization of an HPLC-PDA Method for the Determination of Major Cannabinoids in Hemp (Cannabis sativa L.) Essential Oil Obtained by Hydrodistillation

The use of hemp (Cannabis sativa L.) essential oil (EO) has shown a significant increase in interest and use during recent years. In this work, a new and simple reversed-phase HPLC with photodiode-array (PDA) detector method has been developed and optimized for the detection and quantification of cannabidiolic acid (CBDA), cannabidiol (CBD), cannabinol (CBN), Δ9-tetrahydrocannabinol (Δ9-THC), and Δ9-tetrahydrocannabinolic acid (THCA). The cannabinoids were extracted from the EO by partition with n-hexane and water, followed by sonication, evaporation to dryness under nitrogen, and reconstitution with methanol:chloroform (9:1, v/v) before HPLC-PDA analysis. The method shows good selectivity and robustness, linearity in the range 0.5–100 mg L−1 with R2 higher than 0.999 for all cannabinoids analyzed, LOD of 0.11–0.16 mg L−1, and LOQ of 0.35–0.48 mg L−1. The recovery was between 78 and 100% and the intra-day and intermediate precision, expressed as relative standard deviation (RSD), was < 4% and 4–10%, respectively.

The meristem-associated endosymbiont Methylorubrum extorquens DSM13060 reprograms development and stress responses of pine seedlings

Microbes living in plant tissues-endophytes-are mainly studied in crop plants where they typically colonize the root apoplast. Trees-a large carbon source with a high capacity for photosynthesis-provide a variety of niches for endophytic colonization. We have earlier identified a new type of plant-endophyte interaction in buds of adult Scots pine, where Methylorubrum species live inside the meristematic cells. The endosymbiont Methylorubrum extorquens DSM13060 significantly increases needle and root growth of pine seedlings without producing plant hormones, but by aggregating around host nuclei. Here, we studied gene expression and metabolites of the pine host induced by M. extorquens DSM13060 infection. Malic acid was produced by pine to potentially boost M. extorquens colonization and interaction. Based on gene expression, the endosymbiont activated the auxin- and ethylene (ET)-associated hormonal pathways through induction of CUL1 and HYL1, and suppressed salicylic and abscisic acid signaling of pine. Infection by the endosymbiont had an effect on pine meristem and leaf development through activation of GLP1-7 and ALE2, and suppressed flowering, root hair and lateral root formation by downregulation of AGL8, plantacyanin, GASA7, COW1 and RALFL34. Despite of systemic infection of pine seedlings by the endosymbiont, the pine genes CUL1, ETR2, ERF3, HYL, GLP1-7 and CYP71 were highly expressed in the shoot apical meristem, rarely in needles and not in stem or root tissues. Low expression of MERI5, CLH2, EULS3 and high quantities of ononitol suggest that endosymbiont promotes viability and protects pine seedlings against abiotic stress. Our results indicate that the endosymbiont positively affects host development and stress tolerance through mechanisms previously unknown for endophytic bacteria, manipulation of plant hormone signaling pathways, downregulation of senescence and cell death-associated genes and induction of ononitol biosynthesis.

Role of cannabinoids in various diseases: A review

BACKGROUND

The plant, Cannabis sativa is heavily explored and researched with many industrial and pharmaceutical applications. The medicinal and therapeutic role of cannabis Sativa has been summarized in the paper, citing its mechanism of action and influence on the human body. Diseases like metabolic disorders, infectious diseases, and psychological disorders pose negative and long-term drastic effects on the body like neurodegeneration and other chronic system failures. Several existing literature has proved its effectiveness against such diseases.

OBJECTIVES

This review aims to provide an overview of the role of cannabinoids in various diseases like metabolic disorders, infectious diseases, and psychological disorders.

METHOD

Various e-resources like Pubmed, Science Direct, and Google Scholar were thoroughly searched and read to form a well-informed and information-heavy manuscript. Here we tried to summaries the therapeutic aspect of Cannabis sativa and its bioactive compound cannabinoids in various diseases.

RESULT

This review highlights the various constituents which are present in Cannabis sativa, the Endocannabinoid system, and the role of cannabinoids in various diseases Conclusion: Recent research on Cannabis has suggested its role in neurodegenerative diseases, inflammation, sleep disorders, pediatric diseases, and their analgesic nature. Therefore, the authors majorly focus on the therapeutic aspect of Cannabis sativa in various diseases. The focus is also on the endocannabinoid system (ECS) and its role in fighting or preventing bacterial, parasitic, fungal, and viral infections.

Exploring Pharmacological Mechanisms of Essential Oils on the Central Nervous System

Essential oils (EOs) have been traditionally used as ancient remedies to treat many health disorders due to their enormous biological activities. As mainstream allopathic medication currently used for CNS disorders is associated with adverse effects, the search to obtain safer alternatives as compared to the currently marketed therapies is of tremendous significance. Research conducted suggests that concurrent utilization of allopathic medicines and EOs is synergistically beneficial. Due to their inability to show untoward effects, various scientists have tried to elucidate the pharmacological mechanisms by which these oils exert beneficial effects on the CNS. In this regard, our review aims to improve the understanding of EOs' biological activity on the CNS and to highlight the significance of the utilization of EOs in neuronal disorders, thereby improving patient acceptability of EOs as therapeutic agents. Through data compilation from library searches and electronic databases such as PubMed, Google Scholar, etc., recent preclinical and clinical data, routes of administration, and the required or maximal dosage for the observation of beneficial effects are addressed. We have also highlighted the challenges that require attention for further improving patient compliance, research gaps, and the development of EO-based nanomedicine for targeted therapy and pharmacotherapy.

Antimicrobial and Antiviral (SARS-CoV-2) Potential of Cannabinoids and Cannabis sativa: A Comprehensive Review

Antimicrobial resistance has emerged as a global health crisis and, therefore, new drug discovery is a paramount need. Cannabis sativa contains hundreds of chemical constituents produced by secondary metabolism, exerting outstanding antimicrobial, antiviral, and therapeutic properties. This paper comprehensively reviews the antimicrobial and antiviral (particularly against SARS-CoV-2) properties of C. sativa with the potential for new antibiotic drug and/or natural antimicrobial agents for industrial or agricultural use, and their therapeutic potential against the newly emerged coronavirus disease (COVID-19). Cannabis compounds have good potential as drug candidates for new antibiotics, even for some of the WHO's current priority list of resistant pathogens. Recent studies revealed that cannabinoids seem to have stable conformations with the binding pocket of the Mpro enzyme of SARS-CoV-2, which has a pivotal role in viral replication and transcription. They are found to be suppressive of viral entry and viral activation by downregulating the ACE2 receptor and TMPRSS2 enzymes in the host cellular system. The therapeutic potential of cannabinoids as anti-inflammatory compounds is hypothesized for the treatment of COVID-19. However, more systemic investigations are warranted to establish the best efficacy and their toxic effects, followed by preclinical trials on a large number of participants.

Traditional uses of Cannabis: An analysis of the CANNUSE database

ETHNOPHARMACOLOGICAL RELEVANCE

Cannabis is one of the most versatile genera in terms of plant use and has been exploited by humans for millennia. Nowadays, Cannabis is the centre of many scientific studies, most of them focusing on chemical composition and medicinal values. While new and varied applications are continuously being developed, the knowledge surrounding less common uses of the plant is slowly disappearing.

AIM OF THE REVIEW

We have analysed diversity of global data of Cannabis traditional uses, to investigate if certain plant parts are significantly associated with particular Cannabis use. We wanted to uncover potential associations between the plant parts used for the treatment of different body systems and ailments.

MATERIALS AND METHODS

We have analysed the extensive database of Cannabis traditional uses (CANNUSE). This database contains 2330 data entries of Cannabis ethnobotanical uses from over 40 countries across the world. The dataset was divided into five general groups based on the type of use: medicinal, alimentary, psychoactive, fibre and other uses. Given the abundance of human medicinal uses, detailed analysis was done on the subset of 1167 data entries. We analysed the relationship between 16 body system categories and ailments treated with Cannabis plant parts. We used a Pearson's chi-square and Fisher's exact test, to determine which Cannabis parts are characteristic of treatment for specific ailments.

RESULTS

In this dataset, the majority of reports were represented by medicinal (75.41%), followed by psychoactive (8.35%) and alimentary (7.29%) use. The most commonly used plant parts were leaf (50.51%), seed (15.38%) and inflorescence (11.35%). We found that different Cannabis plant parts were significantly associated with different uses; the leaf was typically used for medicinal, seed for alimentary and inflorescence for psychoactive use. Regarding the human medicinal uses, most common were reports for treatments of the digestive system and nutritional disorders (17.66%), nervous system and mental disorders (16.24%), followed by pain and inflammations (12.21%). We found a significant relationship between the use of certain Cannabis parts and treatment of ailments and body systems categories; leaf was significantly associated with treatment of two categories: skin and subcutaneous tissue disorders and circulatory system and blood disorders; seed use was associated with musculoskeletal system disorders and traumas; while inflorescence use shows a statistical support for treatment of nervous system and mental disorders.

CONCLUSION

Several pharmaceutical companies are intensely working on developing new drugs with isolated chemical compounds or crude extracts, almost exclusively from Cannabis inflorescences. However, our review revealed that use of leaf or seed in traditional medicine is often more important than use of inflorescence for the treatment of certain ailments. A review of traditional medicine provides a body of knowledge and an initial pathway to identify landraces and plant parts that could have an important role in future medicinal research. We are confident that traditional medicine still has a large potential for modern medicine. As more information on Cannabis diversity (genetics, biochemistry, and clinical studies) becomes available, ethnobotanical data are poised to be of much greater significance.

Valorization of CBD-hemp through distillation to provide essential oil and improved cannabinoids profile

Hemp (Cannabis sativa L.) synthesizes and accumulates a number of secondary metabolites such as terpenes and cannabinoids. They are mostly deposited as resin into the glandular trichomes occurring on the leaves and, to a major extent, on the flower bracts. In the last few years, hemp for production of high-value chemicals became a major commodity in the U.S. and across the world. The hypothesis was that hemp biomass valorization can be achieved through distillation and procurement of two high-value products: the essential oil (EO) and cannabinoids. Furthermore, the secondary hypothesis was that the distillation process will decarboxylate cannabinoids hence improving cannabinoid composition of extracted hemp biomass. Therefore, this study elucidated the effect of steam distillation on changes in the content and compositional profile of cannabinoids in the extracted biomass. Certified organic CBD-hemp strains (chemovars, varieties) Red Bordeaux, Cherry Wine and Umpqua (flowers and some upper leaves) and a T&H strain that included chopped whole-plant biomass, were subjected to steam distillation, and the EO and cannabinoids profile were analyzed by gas chromatography-mass spectrometry (GC-MS) and HPLC, respectively. The distillation of hemp resulted in apparent decarboxylation and conversion of cannabinoids in the distilled biomass. The study demonstrated a simple method for valorization of CBD-hemp through the production of two high-value chemicals, i.e. EO and cannabinoids with improved profile through the conversion of cannabidiolic acid (CBD-A) into cannabidiol (CBD), cannabichromenic acid (CBC-A) into cannabichromene (CBC), cannabidivarinic acid (CBDV-A) into cannabidivarin (CBDV), cannabigerolic acid (CBG-A) into cannabigerol (CBG), and δ-9-tetrahydrocannabinolic acid (THC-A) into δ-9-tetrahydrocannabinol (THC). In addition, the distilled biomass contained CBN while the non-distilled did not. Distillation improved the cannabinoids profile; e.g. the distilled hemp biomass had 3.4 times higher CBD in variety Red Bordeaux, 5.6 times in Cherry Wine, 9 times in variety Umpqua, and 6 times in T&H compared to the original non-distilled samples, respectively. Most of the cannabinoids remained in the distilled biomass and small amounts of CBD were transferred to the EO. The CBD concentration in the EO was as follows: 5.3% in the EO of Umpqua, 0.15% in the EO of Cherry Wine and Red Bordeaux and 0.06% in the EO of T&H. The main 3 EO constituents were similar but in different ratio; myrcene (23.2%), (E)-caryophyllene (16.7%) and selina-3,7(11)-diene (9.6%) in Cherry Wine; (E)-caryophyllene (~ 20%), myrcene (16.6%), selina-3,7(11)-diene (9.6%), α-humulene (8.0%) in Red Bordeaux; (E)-caryophyllene (18.2%) guaiol (7.0%), 10-epi-γ-eudesmol (6.9%) in Umpqua; and (E)-caryophyllene (30.5%), α-humulene (9.1%), and (E)-α-bisabolene (6.5%) in T&H. In addition, distillation reduced total THC in the distilled biomass. Scanning electron microscopy (SEM) analyses revealed that most of the glandular trichomes in the distilled biomass were not disturbed (remained intact); that suggest a possibility for terpenes evaporation through the epidermal membrane covering the glandular trichomes leaving the cannabinoids in the trichomes. This explained the fact that distillation resulted in terpene extraction while the cannabinoids remained in the distilled material.

Evaluation of hemp (Cannabis sativa L.) as an industrial crop: a review

Rising human population has increased the utilization of available resources for food, clothes, medicine, and living space, thus menacing natural environment and mounting the gap between available resources, and the skills to meet human desires is necessary. Humans are satisfying their desires by depleting available natural resources. Therefore, multifunctional plants can contribute towards the livelihoods of people, to execute their life requirements without degrading natural resources. Thus, research on multipurpose industrial crops should be of high interest among scientists. Hemp, or industrial hemp, is gaining research interest because of its fastest growth and utilization in commercial products including textile, paper, medicine, food, animal feed, paint, biofuel, biodegradable plastic, and construction material. High biomass production and ability to grow under versatile conditions make hemp, a good candidate species for remediation of polluted soils also. Present review highlights the morphology, adaptability, nutritional constituents, textile use, and medicinal significance of industrial hemp. Moreover, its usage in environmental conservation, building material, and biofuel production has also been discussed.

Influence of the Use of an Ionic Liquid as Pre-Hydrodistillation Maceration Medium on the Composition and Yield of Cannabis sativa L. Essential Oil

Cannabis sativa L. is a multi-purpose crop, whose resilience, adaptability and soil-enriching properties make it a low-impact production. In the last years, the cultivation of the "industrial" hemp varieties (THC < 0.2%) has been promoted by many Countries, opening a whole new market of hemp-derived products, such as its essential oil (EO). Its distillation might represent an effective method to exploit a residue of the hemp fiber production (flowers), complying with the guidelines of the circular economy. In the present work, different concentrations of an ionic liquid (IL; 1,3-dimethyl-1H-imidazol-3-ium dimethylphosphate) have been studied as a pre-hydrodistillation maceration medium. The EO yields have been evaluated, and their compositions have been analyzed by GC-EIMS. The use of 100% and 90% IL concentrations gave a hydrodistillation yield increment of 250% and 200%, respectively. The 200% yield increase was maintained when the 100% IL was recycled after the hydrodistillation. The lower IL concentrations incremented the cannabinoid and oxygenated sesquiterpene contents, while the opposite was true for sesquiterpene hydrocarbons. The proposed IL-enhanced hydrodistillation medium applied to hemp, studied for the first time in the present work, might be used to both (i) noteworthy increment the hydrodistillation yield and (ii) modulate the obtained EO composition based on the desired final product.