Unraveling the plastic degradation potentials of the plastisphere-associated marine bacterial consortium as a key player for the low-density polyethylene degradation

Enhancing polyethylene degradation: a novel bioprocess approach using Acinetobacter nosocomialis pseudo-resting cells

Despite the discovery of several bacteria capable of interacting with polymers, the activity of the natural bacterial isolates is limited. Furthermore, there is a lack of knowledge regarding the development of bioprocesses for polyethylene (PE) degradation. Here, we report a bioprocess using pseudo-resting cells for efficient degradation of PE. The bacterial strain Acinetobacter nosocomialis was isolated from PE-containing landfills and characterized using low-density PE (LDPE) surface oxidation when incubated with LDPE. We optimized culture conditions to generate catalytic pseudo-resting cells of A. nosocomialis that are capable of degrading LDPE films in a bioreactor. After 28 days of bioreactor operation using pseudo-resting cells of A. nosocomialis, we observed the formation of holes on the PE film (39 holes per 217 cm2, a maximum diameter of 1440 μm). This study highlights the potential of bacteria as biocatalysts for the development of PE degradation processes. KEY POINTS: • New bioprocess has been proposed to degrade polyethylene (PE). • Process with pseudo-resting cells results in the formation of holes in PE film. • We demonstrated PE degradation using A. nosocomialis as a biocatalyst.

In situ real-time pathway to study the polyethylene long-term degradation process by a marine fungus through confocal Raman quantitative imaging

Since plastic waste has become a worldwide pollution problem, studying the ability of marine microorganisms to degrade plastic waste is important. However, conventional methods are unable to in situ real-time study the ability of microorganisms to biodegrade plastics. In recent years, Raman spectroscopy has been widely used in the characterization of plastics as well as in the study of biological metabolism due to its low cost, rapidity, label-free, non-destructive, and water-independent features, which provides us with new ideas to address the above limitations. Here, we have established a method to study the degradation ability of microorganisms on plastics using confocal Raman imaging. Alternaria alternata FB1, a recently reported polyethylene (PE) degrading marine fungus, is used as a model to perform a long-term (up to 274 days) in situ real-time nondestructive inspection of its degradation process. We can prove the degradation of PE plastics from the following two aspects, visualization and analysis of the degradation process based on depth imaging and quantification of the degradation rate by crystallinity calculations. The findings also reveal unprecedented degradation details. The method is important for realizing high-throughput screening of microorganisms with potential to degrade plastics and studying the degradation process of plastics in the future.

Biodegradation of polyethylene by the marine fungus Parengyodontium album

Plastic pollution in the marine realm is a severe environmental problem. Nevertheless, plastic may also serve as a potential carbon and energy source for microbes, yet the contribution of marine microbes, especially marine fungi to plastic degradation is not well constrained. We isolated the fungus Parengyodontium album from floating plastic debris in the North Pacific Subtropical Gyre and measured fungal-mediated mineralization rates (conversion to CO2) of polyethylene (PE) by applying stable isotope probing assays with 13C-PE over 9 days of incubation. When the PE was pretreated with UV light, the biodegradation rate of the initially added PE was 0.044 %/day. Furthermore, we traced the incorporation of PE-derived 13C carbon into P. album biomass using nanoSIMS and fatty acid analysis. Despite the high mineralization rate of the UV-treated 13C-PE, incorporation of PE-derived 13C into fungal cells was minor, and 13C incorporation was not detectable for the non-treated PE. Together, our results reveal the potential of P. album to degrade PE in the marine environment and to mineralize it to CO2. However, the initial photodegradation of PE is crucial for P. album to metabolize the PE-derived carbon.

Plastiome: Plastisphere-enriched mobile resistome in aquatic environments

Aquatic microplastics (MPs) act as reservoirs for microbial communities, fostering the formation of a mobile resistome encompassing diverse antibiotic (ARGs) and biocide/metal resistance genes (BMRGs), and mobile genetic elements (MGEs). This collective genetic repertoire, referred to as the "plastiome," can potentially perpetuate environmental antimicrobial resistance (AMR). Our study examining two Japanese rivers near Tokyo revealed that waterborne MPs are primarily composed of polyethylene and polypropylene fibers and sheets of diverse origin. Clinically important genera like Exiguobacterium and Eubacterium were notably enriched on MPs. Metagenomic analysis uncovered a 3.46-fold higher enrichment of ARGs on MPs than those in water, with multidrug resistance genes (MDRGs) and BMRGs prevailing, particularly within MPs. Specific ARG and BMRG subtypes linked to resistance to vancomycin, beta-lactams, biocides, arsenic, and mercury showed selective enrichment on MPs. Network analysis revealed intense associations between host genera with ARGs, BMRGs, and MGEs on MPs, emphasizing their role in coselection. In contrast, river water exhibited weaker associations. This study underscores the complex interactions shaping the mobile plastiome in aquatic environments and emphasizes the global imperative for research to comprehend and effectively control AMR within the One Health framework.

The microplastics distribution characteristics and their impact on soil physicochemical properties and bacterial communities in food legumes farmland in northern China

Microplastics (MPs) pose a threat to farmland soil quality and crop safety. MPs exist widely in food legumes farmland soil due to the extensive use of agricultural film and organic fertilizer, but their distribution characteristics and their impact on soil environment have not been reported. The abundance and characteristics of MPs, soil physical and chemical properties, and bacterial community composition were investigated in 76 soil samples from five provinces in northern China. The results showed that the abundance of MPs ranged from 1600 to 36,200 items/kg. MPs in soil were mostly fibrous, less than 0.2 mm, and white. Rayon, polyester and polyethylene were the main types of MPs. The influences of MPs on soil physicochemical properties and bacterial communities mainly depended on the type of MPs. Notably, polyethylene significantly decreased the proportion of silt particles, and increased the nitrate nitrogen content as well as the abundance of MPs-degrading bacteria Paenibacillus (p < 0.05). Moreover, bacteria were more sensitive to polyesters in soil with low concentration of organic matter. This study indicated that MPs in food legumes farmland soil presented a higher-level. And, they partially altered soil physicochemical properties, and soil bacteria especially in soil with low organic matter.

Freshwater plastisphere: a review on biodiversity, risks, and biodegradation potential with implications for the aquatic ecosystem health

The plastisphere, a unique microbial biofilm community colonizing plastic debris and microplastics (MPs) in aquatic environments, has attracted increasing attention owing to its ecological and public health implications. This review consolidates current state of knowledge on freshwater plastisphere, focussing on its biodiversity, community assembly, and interactions with environmental factors. Current biomolecular approaches revealed a variety of prokaryotic and eukaryotic taxa associated with plastic surfaces. Despite their ecological importance, the presence of potentially pathogenic bacteria and mobile genetic elements (i.e., antibiotic resistance genes) raises concerns for ecosystem and human health. However, the extent of these risks and their implications remain unclear. Advanced sequencing technologies are promising for elucidating the functions of plastisphere, particularly in plastic biodegradation processes. Overall, this review emphasizes the need for comprehensive studies to understand plastisphere dynamics in freshwater and to support effective management strategies to mitigate the impact of plastic pollution on freshwater resources.

Mining strategies for isolating plastic-degrading microorganisms

Plastic waste is a growing global pollutant. Plastic degradation by microorganisms has captured attention as an earth-friendly tactic. Although the mechanisms of plastic degradation by bacteria, fungi, and algae have been explored over the past decade, a large knowledge gap still exists regarding the identification, sorting, and cultivation of efficient plastic degraders, primarily because of their uncultivability. Advances in sequencing techniques and bioinformatics have enabled the identification of microbial degraders and related enzymes and genes involved in plastic biodegradation. In this review, we provide an outline of the situation of plastic degradation and summarize the methods for effective microbial identification using multidisciplinary techniques such as multiomics, meta-analysis, and spectroscopy. This review introduces new strategies for controlling plastic pollution in an environmentally friendly manner. Using this information, highly efficient and colonizing plastic degraders can be mined via targeted sorting and cultivation. In addition, based on the recognized rules and plastic degraders, we can perform an in-depth analysis of the associated degradation mechanism, metabolic features, and interactions.

Oceanimonas pelagia sp. nov., a novel biosurfactant-producing and plastic-degrading potential bacterium isolated from marine coastal sediment

A marine bacterial strain, named NTOU-MSR1T, was isolated from marine sediment of northern coast of Taiwan. This bacterium was Gram-stain-negative, aerobic, and motile, with a single flagellum. Its rod-shaped cells measured approximately 0.5-0.6 µm in width and 1.8-2.0 μm in length. NTOU-MSR1T grew at temperatures ranging from 10 to 45 °C, optimally at 30 °C. The pH range for growth was 7.0-10.0, with optimal growth at pH 7.0-8.0. It tolerated NaCl concentrations up to 12%. The cell membrane predominantly contained fatty acids such C16:1ω7c, C18:1ω7c, and C16:0. The overall genome relatedness indices indicated that strain NTOU-MSR1T had an average nucleotide identity (ANI) of 87.88% and a digital DNA-DNA hybridization (dDDH) value of 35.40% compared to its closest related species, O. marisflavi 102-Na3T. These values fell below the 95% and 70% threshold for species delineation, respectively. These findings suggested that the strain NTOU-MSR1T was a new member of the Oceanimonas genus. Its genomic DNA had a G + C content of 61.0 mol%. Genomic analysis revealed genes associated with the catechol branch of β- ketoadipate pathway for degrading polycyclic aromatic hydrocarbons, resistance to heavy metal, biosynthesis of polyhydroxybutyrate and the production of glycoside hydrolases (GH19, GH23, and GH103) for chitin and glycan digestion. Additionally, NTOU-MSR1T was capable of synthesizing biosurfactants and potentially degrading plastic. The proposed name for this new species is Oceanimonas pelagia, with the type strain designated as NTOU-MSR1T (= BCRC 81403T = JCM 36023T).

Marine plastisphere selectively enriches microbial assemblages and antibiotic resistance genes during long-term cultivation periods

Several studies have focused on identifying and quantifying suspended plastics in surface and subsurface seawater. Microplastics (MPs) have attracted attention as carriers of antibiotic resistance genes (ARGs) in the marine environment. Plastispheres, specific biofilms on MP, can provide an ideal niche to spread more widely through horizontal gene transfer (HGT), thereby increasing risks to ecosystems and human health. However, the microbial communities formed on different plastic types and ARG abundances during exposure time in natural marine environments remain unclear. Four types of commonly used MPs (polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC)) were periodically cultured (46, 63, and 102 d) in a field-based marine environment to study the co-selection of ARGs and microbial communities in marine plastispheres. After the first 63 d of incubation (p < 0.05), the initial 16S rRNA gene abundance of microorganisms in the plastisphere increased significantly, and the biomass subsequently decreased. These results suggest that MPs can serve as vehicles for various microorganisms to travel to different environments and eventually provide a niche for a variety of microorganisms. Additionally, the qPCR results showed that MPs selectively enriched ARGs. In particular, tetA, tetQ, sul1, and qnrS were selectively enriched in the PVC-MPs. The abundances of intl1, a mobile genetic element, was measured in all MP types for 46 d (5.22 × 10-5 ± 8.21 × 10-6 copies/16s rRNA gene copies), 63 d (5.90 × 10-5 ± 2.49 × 10-6 copies/16s rRNA gene copies), and 102 d (4.00 × 10-5 ± 5.11 × 10-6 copies/16s rRNA gene copies). Network analysis indicated that ARG profiles co-occurred with key biofilm-forming bacteria. This study suggests that the selection of ARGs and their co-occurring bacteria in MPs could potentially accelerate their transmission through HGT in natural marine plastics.

Hydrolase and plastic-degrading microbiota explain degradation of polyethylene terephthalate microplastics during high-temperature composting

This research aims to explore the degradation properties of polyethylene terephthalate (PET) by PET hydrolase (WCCG) in high-temperature composting and its impact on microbial communities. PET degradation, composting parameters and microbial communities were assessed in 220 L sludge composters with PET and WCCG using high-throughput sequencing. Results showed that WCCG addition led to a deceleration of the humification process and a reduction in the relative abundance of thermophilic genera. Potential PET degrading microbiota, e.g. Acinetobacter, Bacillus, were enriched in the plastisphere in the composters where PET reduced by 26 % without WCCG addition. The external introduction of the WCCG enzyme to compost predominantly instigates a chemical reaction with PET, concurently curtailing the proliferation of plastic-degrading bacteria, leading to a 35 % degradation of PET. Both the WCCG enzyme and the microbiota associated with plastic-degradation showed the potential for reducing PET, offering a novel method for mitigating pollution caused by environmental microplastics.

Phylloplane fungus Curvularia dactyloctenicola VJP08 effectively degrades commercially available PS product

Polystyrene (PS), a widely produced plastic with an extended carbon (C-C) backbone that resists microbial attack, is produced in enormous quantities throughout the World. Naturally occurring plasticizers such as plant cuticle and lignocelluloses share similar properties to synthetic plastics such as hydrophobicity, structural complexity, and higher recalcitrance to degradation. In due course of time, phytopathogenic fungi have evolved strategies to overcome these limitations and utilize lignocellulosic waste for their nutrition. The present investigation focuses on the utilization of phylloplane fungus, Curvularia dactyloctenicola VJP08 towards its ability to colonize and degrade commercially available PS lids. The fungus was observed to densely grow onto PS samples over an incubation period of 30 days. The morphological changes showcased extensive fungal growth with mycelial imbrication invading the PS surface for carbon extraction leading to the appearance of cracks and holes in the PS surface. It was further confirmed by EDS analysis which indicated that carbon was extracted from PS for the fungal growth. Further, 3.57% decrease in the weight, 8.8% decrease in the thickness and 2 °C decrease in the glass transition temperature (Tg) confirmed alterations in the structural integrity of PS samples by the fungal action. GC-MS/MS analysis of the treated PS samples also showed significant decrease in the concentration of benzene and associated aromatic derivatives confirming the degradation of PS samples and subsequent utilization of generated by-products by the fungus for growth. Overall, the present study confirmed the degradation and utilization of commercially available PS samples by phylloplane fungus C. dactyloctenicola VJP08. These findings establish a clear cross-assessment of the phylloplane fungi for their prospective use in the development of degradation strategies of synthetic plastics.

Metagenomic and proteomic insights into the self-adaptive cell surface hydrophobicity of Sphingomonas sp. strain PAH02 reducing the migration of cadmium-phenanthrene co-pollutant in rice

Cell surface hydrophobicity (CSH) dominates the interactions between rhizobacteria and pollutants at the soil-water interface, which is critical for understanding the dissipation of pollutants in the rhizosphere microzone of rice. Herein, we explored the effects of self-adaptive CSH of Sphingomonas sp. strain PAH02 on the translocation and biotransformation behaviour of cadmium-phenanthrene (Cd-Phe) co-pollutant in rice and rhizosphere microbiome. We evidenced that strain PAH02 reduced the adsorption of Cd-Phe co-pollutant on the rice root surface while enhancing the degradation of Phe and adsorption of Cd via its self-adaptive CSH in the hydroponic experiment. The significant upregulation of key protein expression levels such as MerR, ARHDs and enoyl-CoA hydratase/isomerase, ensures self-adaptive CSH to cope with the stress of Cd-Phe co-pollutant. Consistently, the bioaugmentation of strain PAH02 promoted the formation of core microbiota in the rhizosphere soil of rice (Oryza sativa L.), such as Bradyrhizobium and Streptomyces and induced gene enrichment of CusA and PobA that are strongly associated with pollutant transformation. Consequently, the contents of Cd and Phe in rice grains at maturity decreased by 17.2% ± 0.2% and 65.7% ± 0.3%, respectively, after the bioaugmentation of strain PAH02. These findings present new opportunities for the implementation of rhizosphere bioremediation strategies of co-contaminants in paddy fields.

Current advances, challenges and strategies for enhancing the biodegradation of plastic waste

Due to its highly recalcitrant nature, the growing accumulation of plastic waste is becoming an urgent global problem. Biodegradation is one of the best possible approaches for the treatment of plastic waste in an environmentally friendly manner, but our current knowledge on the underlying mechanisms, as well as strategies for the development and enhancement of plastic biodegradation are still limited. This review aims to provide an updated and comprehensive overview of current research on plastic waste biodegradation, focusing on enhancement strategies with ongoing research significance, including the mining of highly efficient plastic-degrading microorganisms/enzymes, utilization of synergistic additives, novel pretreatment approaches, modification via molecular engineering, and construction of bacterial/enzyme consortia systems. Studying these strategies can (i) enrich the high-performance microbial/enzymes toolbox for plastic degradation, (ii) provide methods for recycling and upgrading plastics, as well as (iii) enable further molecular modification and functional optimization of plastic-degrading enzymes to realize economically viable biodegradation of plastics. To the best of our knowledge, this is the first review to discuss in detail strategies to enhance biodegradation of plastics. Finally, some recommendations for future research on plastic biodegradation are listed, hoping to provide the best direction for tackling the plastic waste dilemma in the future.

Biodegradation and Detoxification of Low-Density Polyethylene (LDPE) by Stenotrophomonas sp. and Alcaligenaceae bacterium

Every year, human activities introduce large amounts of synthetic plastics into the environment. Decomposition of the plastic derivatives is very difficult and time consuming, so it is essential to eliminate these pollutants using different methods. Bioremediation, is suitable option, because of the low cost and environmentally safe. In this research, degradation of low-density polyethylene (LDPE) was investigated by two strains, isolated from Hamadan province (Iran) landfill soil. After identification by 16sr DNA primers, their abilities of polyethylene biodegradation were examined by Fourier transform infrared (FTIR), SEM and Gas Chromatography-Mass Spectrometry (GC-MS). Using media contain polyethylene) after and before addition of bacteria), toxicity test was conducted by measuring the germination index, root and hypocotyl length of Lactuca sativa seed. After three months, 10.15% ± 1.04 weight loss of LDPE achieved through strain Stenotrophomonas sp. degradation. Both strains had high biofilm formation capacity, confirmed by Electron microscope images and FTIR analysis. GC-MS confirmed the presence of the end-product of LDPE degradation (Pentacosane, Hexacosane, and Octadecane). Both, Stenotrophomonas sp. and Alcaligenaceae bacterium had significant detoxification ability. In media contain LDPE (without bacteria), decrease in the germination of lettuce seeds was observed.

Enrichment of native plastic-associated biofilm communities to enhance polyester degrading activity

Plastic pollution is an increasing worldwide problem urgently requiring a solution. While recycling rates are increasing globally, only 9% of all plastic waste has been recycled, and with the cost and limited downstream uses of recycled plastic, an alternative is needed. Here, we found that expanded polystyrene (EPS) promoted high levels of bacterial biofilm formation and sought out environmental EPS waste to characterize these native communities. We demonstrated that the EPS attached communities had limited plastic degrading activity. We then performed a long-term enrichment experiment where we placed a robust selection pressure on these communities by limiting carbon availability such that the waste plastic was the only carbon source. Seven of the resulting enriched bacterial communities had increased plastic degrading activity compared to the starting bacterial communities. Pseudomonas stutzeri was predominantly identified in six of the seven enriched communities as the strongest polyester degrader. Sequencing of one isolate of P. stutzeri revealed two putative polyesterases and one putative MHETase. This indicates that waste plastic-associated biofilms are a source for bacteria that have plastic-degrading potential, and that this potential can be unlocked through selective pressure and further in vitro enrichment experiments, resulting in biodegradative communities that are better than nature.

Combined approaches for detecting polypropylene microplastics in crop plants

Microplastics (MPs) pollution in the terrestrial environment causes accumulation in crop plants. Consumption of these plants may have negative effects on human health. Therefore, it is crucial to analyze MPs accumulation in the plants. The aim of this study is to determine polypropylene (PP) particles in plants exposed to label-free PP for 75 days. In order to extract PP from organic matter, a two-step alkaline and wet peroxide oxidation chemical digestion method was applied to the roots, stems, and leaves of maize and wheat. The PP particles in the digested solutions were detected by the Nile red staining method, which has not been used previously in the detection of MPs in plants. Nile red stained PP particles mostly accumulated in the roots of wheat and the stems of maize plants. Statistical analysis revealed that the maize deposited more and larger PP particles regardless of the location. Moreover, the presence of PP particles in the digestion solutions was proved by the heating method. The PP particles on the glass slides were transformed into different shapes due to melting.

A novel marine bacterium Exiguobacterium marinum a-1 isolated from in situ plastisphere for degradation of additive-free polypropylene

As the ecological niche most closely associated with polymers, microorganisms in the 'plastisphere' have great potential for plastics degradation. Microorganisms isolated from the 'plastisphere' could colonize and degrade commercial plastics containing different additives, but the observed weight loss and surface changes were most likely caused by releasing the additives rather than actual degradation of the plastics itself. Unlike commercial plastics that contain additives, whether marine microorganisms in the 'plastisphere' have adapted to additive-free plastics as a surface to colonize and potentially degrade is not yet known. Herein, a novel marine bacterium, Exiguobacterium marinum a-1, was successfully isolated from mature 'plastisphere' that had been deployed in situ for up to 20 months. Strain a-1 could use additive-free polypropylene (PP) films as its primary energy and carbon source. After strain a-1 was incubated with additive-free PP films for 80 days, the weight of films decreased by 9.2%. The ability of strain a-1 to rapidly form biofilms and effectively colonize the surface of additive-free PP films was confirmed by Scanning Electron Microscopy (SEM), as reflected by the increase in roughness and visible craters on the surface of additive-free PP films. Additionally, the functional groups of -CO, -C-H, and -OH were identified on the treated additive-free PP films according to Fourier Transform Infrared (FTIR). Genomic data from strain a-1 revealed a suite of key genes involved in biosurfactant synthesis, flagellar assembly, and cellular chemotaxis, contributing to its rapid biofilm formation on hydrophobic polymer surfaces. In particular, key enzymes that may be responsible for the degradation of additive-free PP films, such as glutathione peroxidase, cytochrome p450 and esterase were also recognized. This study highlights the potential of microorganisms present in the 'plastisphere' to metabolize plastic polymers and points to the intrinsic importance of the new strain a-1 in the mitigation of plastic pollution.

Recent developments in bio-based polyethylene: Degradation studies, waste management and recycling

Nowadays, the tendency to replace conventional fossil-based plastics is increasing considerably; there is a growing trend towards alternatives that involve the development of plastic materials derived from renewable sources, which are compostable and biodegradable. Indeed, only 1.5 % of whole plastic production is part of the small bioplastics market, even when these materials with a partial or full composition from biomass are rapidly expanding. A very interesting field of investigation is currently being developed in which the disposal and processing of the final products are evaluated in terms of reducing environmental harm. This review presents a compilation of polyethylene (PE) types, their uses, and current problems in the waste management of PE and recycling. Particularly, this review is based on the capabilities to synthesize bio-based PE from natural and renewable sources as a replacement for the raw material derived from petroleum. In addition to recent studies in degradation on different types of PE with weight loss ranges from 1 to 47 %, the techniques used and the main changes observed after degradation. Finally, perspectives are presented in the manuscript about renewable and non-renewable polymers, depending on the non-degradable, biodegradable, and compostable behavior, including composting recent studies in PE. In addition, it contributes to the 3R approaches to responsible waste management of PE and advancement towards an environmentally friendly PE.

The escalated potential of the novel isolate Bacillus cereus NJD1 for effective biodegradation of LDPE films without pre-treatment

This study focused on the biodegradation of LDPE films using a novel isolate of Bacillus obtained from soil samples collected from a 20-year-old plastic waste dump. The aim was to evaluate the biodegradability of LDPE films treated with this bacterial isolate. The results indicated a 43% weight loss of LDPE films within 120 days of treatment. The biodegradability of LDPE films was confirmed through various testing methods, including BATH, FDA, CO₂ evolution tests, and changes in total cell growth count, protein content, viability, p^H of the medium, and release of microplastics. The bacterial enzymes, including laccases, lipases, and proteases, were also identified. SEM analysis revealed biofilm formation and surface changes in treated LDPE films, while EDAX analysis showed a reduction in carbon elements. AFM analysis demonstrated differences in roughness compared to the control. Furthermore, wettability increased and tensile strength decreased, confirming the biodegradation of the isolate. FTIR spectral analysis showed changes in skeletal vibrations, such as stretches and bends, in the linear structure of polyethylene. FTIR imaging and GC-MS analysis also confirmed the biodegradation of LDPE films by the novel isolate identified as Bacillus cereus strain NJD1. The study highlights the potentiality of the bacterial isolate for safe and effective microbial remediation of LDPE films.

Plastisphere microbiome: Methodology, diversity, and functionality

Broad topics of the plastisphere in various environments are reviewed, including its methodologies, diversity, functionality, and outlook.

Call for biotechnological approach to degrade plastic in the era of COVID-19 pandemic

Plastic pollution is a global issue and has become a major concern since Coronavirus disease (COVID)-19. In developing nations, landfilling and illegal waste disposal are typical ways to dispose of COVID-19-infected material. These technologies worsen plastic pollution and other human and animal health problems. Plastic degrades in light and heat, generating hazardous primary and secondary micro-plastic. Certain bacteria can degrade artificial polymers using genes, enzymes, and metabolic pathways. Microorganisms including bacteria degrade petrochemical plastics slowly. High molecular weight, strong chemical bonds, and excessive hydrophobicity reduce plastic biodegradation. There is not enough study on genes, enzymes, and bacteria-plastic interactions. Synthetic biology, metabolic engineering, and bioinformatics methods have been created to biodegrade synthetic polymers. This review will focus on how microorganisms' degrading capacity can be increased using recent biotechnological techniques.

Assembly strategies for polyethylene-degrading microbial consortia based on the combination of omics tools and the "Plastisphere"

Numerous microorganisms and other invertebrates that are able to degrade polyethylene (PE) have been reported. However, studies on PE biodegradation are still limited due to its extreme stability and the lack of explicit insights into the mechanisms and efficient enzymes involved in its metabolism by microorganisms. In this review, current studies of PE biodegradation, including the fundamental stages, important microorganisms and enzymes, and functional microbial consortia, were examined. Considering the bottlenecks in the construction of PE-degrading consortia, a combination of top-down and bottom-up approaches is proposed to identify the mechanisms and metabolites of PE degradation, related enzymes, and efficient synthetic microbial consortia. In addition, the exploration of the plastisphere based on omics tools is proposed as a future principal research direction for the construction of synthetic microbial consortia for PE degradation. Combining chemical and biological upcycling processes for PE waste could be widely applied in various fields to promote a sustainable environment.

Genome analysis of a plastisphere-associated Oceanimonas sp. NSJ1 sequenced on Nanopore MinION platform

Oceanimonas sp. NSJ1 was isolated from macroplastic debris collected previously from Junput, an intertidal beach, facing the northeast coastal Bay of Bengal of the Northern Indian Ocean. The genome of this isolate is closely related to Oceanimonas doudoroffii with a genome size of 3.56 Mbp. The genome annotation confirmed the presence of 5919 total genes, out of which 5809 were CDSs (coding sequences) and all are protein-coding. The genome codes for 110 RNA with 25 rRNA, 84 tRNA (transfer RNA), and one tmRNA (transfer-messenger RNA). Analyses of the annotated genome of Oceanimonas sp. NSJ1 revealed the presence of enzymes involved in the degradation of polycyclic aromatic hydrocarbons. The presence of phthalate 4,5-dioxygenase oxygenase reductase subunit pht2 within the genome also highlights the novelty of this isolate and future functional potential for studying phthalate degradation in marine environment.

Biodegradation of polyethylene and polystyrene: From microbial deterioration to enzyme discovery

The global production of plastics has continuously been soaring over the last decades due to their extensive use in our daily life and in industries. Although synthetic plastics offer great advantages from packaging to construction and electronics, their low biodegradability induce serious plastic pollution that damage the environment, human health and make irreversible changes in the ecological cycle. In particular, plastics containing only carbon-carbon (C-C) backbone are less susceptible to degradation due to the lack of hydrolysable groups. The representative polyethylene (PE) and polystyrene (PS) account for about 40% of the total plastic production. Various chemical and biological processes with great potential have been developed for plastic recycle and reuse, but biodegradation seems to be the most attractive and eco-friendly method to combat this growing environmental problem. In this review, we first summarize the current advances in PE and PS biodegradation, including isolation of microbes and potential degrading enzymes from different sources. Next, the state-of-the-art techniques used for evaluating and monitoring PE and PS degradation, the scientific toolboxes for enzyme discovery as well as the challenges and strategies for plastic biodegradation are intensively discussed. In return, it inspires a further technological exploration in expanding the diversity of species and enzymes, disclosing the essential pathways and developing new approaches to utilize plastic waste as feedstock for recycling and upcycling.