Growth inhibition of the microalgae Skeletonema costatum under copper nanoparticles with microplastic exposure

Overview of the environmental risks of microplastics and their controlled degradation from the perspective of free radicals

Owing to the significant environmental threat posed by microplastics (MPs) of varying properties, MPs research has garnered considerable attention in current academic discourse. Addressing MPs in river-lake water systems, existing studies have seldom systematically revealed the role of free radicals in the aging/degradation process of MPs. Hence, this review aims to first analyze the pollution distribution and environmental risks of MPs in river-lake water systems and to elaborate the crucial role of free radicals in them. After that, the study delves into the advancements in free radical-mediated degradation techniques for MPs, emphasizing the significance of both the generation and elimination of free radicals. Furthermore, a novel approach is proposed to precisely govern the controlled generation of free radicals for MPs' degradation by interfacial modification of the material structure. Hopefully, it will shed valuable insights for the effective control and reduction of MPs in river-lake water systems.

Effects of micro- and nano-plastics on growth, antioxidant system, DMS, and DMSP production in Emiliania huxleyi

Due to the potential impacts of microplastics (MPs) and nanoplastics (NPs) on algal growth and thereby affect the climate-relevant substances, dimethylsulfoniopropionate (DMSP) and dimethyl sulfide (DMS), we studied the polystyrene (PS) MPs and NPs of 1 μm and 80 nm impacts on the growth, chlorophyll content, reactive oxygen species (ROS), antioxidant enzyme activity, and DMS/DMSP production in Emiliania huxleyi. E. huxleyi is a prominent oceanic alga that plays a key role in DMS and DMSP production. The results revealed that high concentrations of MPs and NPs inhibited the growth, carotenoid (Car), and Chl a concentrations of E. huxleyi. However, short-time exposure to low concentrations of PS MPs and NPs stimulated the growth of E. huxleyi. Furthermore, high concentrations of MPs and NPs resulted in an increase in the superoxide anion radical (O2.-) production rate and a decrease in the malondialdehyde (MDA) content compared with the low concentrations. Exposure to MPs and NPs at 5 mg L-1 induced superoxide dismutase (SOD) activity as a response to scavenging ROS. High concentrations of MPs and NPs significantly inhibited the production of DMSP and DMS. The findings of this study support the potential ecotoxicological impacts of MPs and NPs on algal growth, antioxidant system, and dimethylated sulfur compounds production, which maybe potentially impact the global climate.

Using artificial intelligence to rapidly identify microplastics pollution and predict microplastics environmental behaviors

With the massive release of microplastics (MPs) into the environment, research related to MPs is advancing rapidly. Effective research methods are necessary to identify the chemical composition, shape, distribution, and environmental impacts of MPs. In recent years, artificial intelligence (AI)-driven machine learning methods have demonstrated excellent performance in analyzing MPs in soil and water. This review provides a comprehensive overview of machine learning methods for the prediction of MPs for various tasks, and discusses in detail the data source, data preprocessing, algorithm principle, and algorithm limitation of applied machine learning. In addition, this review discusses the limitation of current machine learning methods for various task analysis in MPs along with future prospect. Finally, this review finds research potential in future work in building large generalized MPs datasets, designing high-performance but low-computational-complexity algorithms, and evaluating model interpretability.

Enhancing the production of PHA in Scenedesmus sp. by the addition of green synthesized nitrogen, phosphorus, and nitrogen-phosphorus-doped carbon dots

Plastic consumption has increased globally, and environmental issues associated with it have only gotten more severe; as a result, the search for environmentally friendly alternatives has intensified. Polyhydroxyalkanoates (PHA), as biopolymers produced by microalgae, might be an excellent option; however, large-scale production is a relevant barrier that hinders their application. Recently, innovative materials such as carbon dots (CDs) have been explored to enhance PHA production sustainably. This study added green synthesized multi-doped CDs to Scenedesmus sp. microalgae cultures to improve PHA production. Prickly pear was selected as the carbon precursor for the hydrothermally synthesized CDs doped with nitrogen, phosphorous, and nitrogen-phosphorous elements. CDs were characterized by different techniques, such as FTIR, SEM, ζ potential, UV-Vis, and XRD. They exhibited a semi-crystalline structure with high concentrations of carboxylic groups on their surface and other elements, such as copper and phosphorus. A medium without nitrogen and phosphorous was used as a control to compare CDs-enriched mediums. Cultures regarding biomass growth, carbohydrates, lipids, proteins, and PHA content were analyzed. The obtained results demonstrated that CDs-enriched cultures produced higher content of biomass and PHA; CDs-enriched cultures presented an increase of 26.9% in PHA concentration and an increase of 32% in terms of cell growth compared to the standard cultures.

A Study on the Growth and Physiological Toxicity Effects of the Combined Exposure of Microplastics and Cadmium on the Vicia faba L. Seedlings

To investigate the toxicological effects of polystyrene microplastics (PS-MPs), cadmium (Cd), and their combined contamination on the growth and physiological responses of V. faba seedlings, this experiment employed a hydroponic method. The Hoagland nutrient solution served as the control, changes in root growth, physiological and biochemical indicators of V. faba seedlings under different concentrations of PS-MPs (10, 100 mg/L) alone and combined with 0.5 mg/L Cd. The results demonstrated that the root biomass, root vitality, generation rate of superoxide radicals (O2·-), malondialdehyde (MDA) content, and superoxide dismutase (SOD) activity increased with increasing concentration under the influence of PS-MPs alone, while the soluble sugar content and peroxidase (POD) activity decreased. In the combined treatment with Cd, the trends of these indicators are generally similar to the PS-MPs alone treatment group. However, root vitality and SOD activity showed an inverse relationship with the concentration of PS-MPs. Furthermore, laser confocal and electron microscopy scanning revealed that the green fluorescent polystyrene microspheres entered the root tips of the V. faba and underwent agglomeration in the treatment group with a low concentration of PS-MPs alone and a high concentration of composite PS-MPs with Cd.

Microalgal-based industry vs. microplastic pollution: Current knowledge and future perspectives

Microalgae can play a crucial role in the environment due to their efficient capture of CO2 and their potential as a solution for a carbon-negative economy. Water quality is critical for the success and profitability of microalgal-based industries, and understanding their response to emergent pollutants, such as microplastics (MPs), is essential. Despite the published studies investigating the impact of MPs on microalgae, knowledge in this area remains limited. Most studies have mainly focused on microalgal growth, metabolite analysis, and photosynthetic activity, with significant discrepancies in what is known about the impact on biomass yield. Recent studies show that the yield of biomass production depends on the levels of water contamination by MPs, making it necessary to reduce the contamination levels in the water. However, present technologies for extracting and purifying water from MPs are limited, and further research and technological advancements are required. One promising solution is the use of bio-based polymer materials, such as bacterial cellulose, which offer biodegradability, cost-effectiveness, and environmentally friendly detoxifying properties. This review summarises the current knowledge on MPs pollution and its impact on the viability and proliferation of microalgae-based industries, highlights the need for further research, and discusses the potential of bio-solutions for MPs removal in microalgae-based industries.

Toxic effects of nSiO2 and mPS on diatoms Nitzschia closterium f. minutissima

To investigate the toxic mechanism of SiO2 nanoparticles (nSiO2) and polystyrene microplastics (mPS) on microalgae Nitzschia closterium f. minutissima, growth inhibition tests were carried out. The growth and biological responses of the algae exposed to nSiO2 (0.5, 1, 2, 5, 10, 30 mg L-1) and mPS (1, 5, 10, 30 and 75 mg L-1) were explored in f/2 media for 96 h. Both micro-/nano-particles (MNPs) inhibited the growth of N. closterium f. minutissima in a concentration- and time-dependent manner. The toxic effect of mPS on N. closterium f. minutissima is higher than that of nSiO2, because silicon is essential for diatoms to maintain cell wall integrity, and the addition of appropriate amounts of nSiO2 can be absorbed and used as a nutrient to promote diatom growth and protect the integrity of the siliceous shell to some extent. Both MNPs induce the production of excess oxidation and activate the cellular antioxidant defense system, leading to increased SOD and CAT activity as a means to resist oxidative damage to the cell, and eliminating excess ROS and maintaining normal cell morphology and metabolism. SEM is consistent with the results of MDA, showing that mPS with high concentrations attach to the surface of algal cells to produce heterogeneous aggregates and disrupt the cell wall and cell membrane, causing the cells to expand and rupture. This study contributes to the understanding of the size effect of MNPs on the growth of marine diatom.

A multi-factor analysis evaluating the toxicity of microplastics on algal growth

Marine and freshwater bodies are the primary destinations of microplastics (MPs), where MPs can interact closely with algae. Here, we synthesized existing literature on the effect of MPs on algal growth. Studies examining the effects of MPs on algal growth have yielded conflicting results. Some studies reported growth inhibition, whereas others showed no significant effect or even growth enhancement. Data from 71 studies in the subject area were evaluated using cross-tables, scatterplots, and chi-square tests of independence, and four factors (polymer type, algal type, MP size, MP concentration) likely influencing the observations were identified. Experiments using certain polymers of plastic, such as polyvinyl chloride, and algal phyla, such as Chlorophyta, were more likely to show growth inhibition. Higher MP concentrations were more likely to reduce algal growth, which was further amplified by exposure time. However, MP size appeared to exhibit a nonlinear relationship with algal growth inhibition, suggesting that different MP sizes may elicit different effects. Finally, this review highlights the need for more standardized data collection and analysis methods as well as future research focused on exploring the possible mechanisms of growth hindrance and algae exposure to environmentally relevant conditions.

The comparative effects of visible light and UV-A radiation on the combined toxicity of P25 TiO2 nanoparticles and polystyrene microplastics on Chlorella sp

The ubiquitous presence of TiO2 nanoparticles (nTiO2) and microplastics (MPs) in marine ecosystems has raised serious concerns about their combined impact on marine biota. This study investigated the combined toxic effect of nTiO2 (1 mg/L) and NH2 and COOH surface functionalized polystyrene MPs (PSMPs) (2.5 and 10 mg/L) on Chlorella sp. All the experiments were carried out under both visible light and UV-A radiation conditions to elucidate the impact of light on the combined toxicity of these pollutants. Growth inhibition results indicated that pristine nTiO2 exhibited a more toxic effect (38%) under UV-A radiation when compared to visible light conditions (27%). However, no significant change in the growth inhibitory effects of pristine PSMPs was observed between visible light and UVA radiation conditions. The combined pollutants (nTiO2 + 10 mg/L PSMPs) under UV-A radiation exhibited more growth inhibition (nTiO2 + NH2 PSMPs 66%; nTiO2 + COOH PSMPs 50%) than under visible light conditions (nTiO2 + NH2 PSMPs 55%; TiO2 + COOH PSMPs 44%). Independent action modeling indicated that the mixture of nTiO2 with PSMPs (10 mg/L) exhibited an additive effect on the algal growth inhibition under both the light conditions. The photoactive nTiO2 promoted increased production of reactive oxygen species under UV-A exposure, resulting in cellular damage, lipid peroxidation, and impaired photosynthesis. The effects were more pronounced in case of the mixtures where PSMPs added to the oxidative stress. The toxic effects of the binary mixtures of nTiO2 and PSMPs were further confirmed through the field emission electron microscopy, revealing specific morphological abnormalities. This study provides valuable insights into the potential risks associated with the combination of nTiO2 and MPs in marine environments, considering the influence of environmentally relevant light conditions and the test medium.

Effect of long-term exposure of mixture of ZnO and CuO nanoparticles on Scenedesmus obliquus

The present study investigated the possible toxic effect of ZnO and CuO nanoparticles (NPs) on freshwater microalgae, Scenedesmus obliquus at environmentally- relevant nanoparticle concentration (1 mg/L) and high concentration (10 mg/L) in BG-11 medium under white light LED-illumination over 35 days. The effect of time on the stability of media, nanoparticles, and their relation to toxicity to algae was also studied. The transmission electron microscopy indicated structural damage to algae due to the presence of a mixture of nanoparticles (at 10 mg/L). FTIR (Fourier Transform infrared) analysis of a sample containing a mixture of nanoparticles showed an addition of bonds and a difference in the peak location and its intensity values. The inhibition time for biomass was observed between 14 days and 21 days at 10 mg/L NPs. At 1 mg/L, the order of toxicity of NPs to algae was found to be: CuO NPs (highest toxicity) > ZnO NPs>ZnO + CuO NPs (least toxicity). During exposure of algae cells to a mixture of NPs at 10 mg/L NP concentration, a smaller value of metal deposition was observed than that during exposure to individual NPs. Antagonistic toxic effects of two NPs on dry cell weight of algae was observed at both concentration levels. Future work is needed to understand the steps involved in toxicity due to mixture of NPs to algae so that environmental exposures of algae to NPs can be managed and minimized.

Research advances on impacts micro/nanoplastics and their carried pollutants on algae in aquatic ecosystems: A review

The widespread presence of micro/nanoplastics in aquatic ecosystems has certainly affected ecosystem functions and food chains/webs. The impact is worsened by the accumulation of different pollutants and microorganisms on the surface of microplastics. At the tissue, cellular, and molecular levels, micro/nanoplastics and the contaminants they carry can cause damage to aquatic organisms. Problematically, the toxic mechanism of micro/nanoplastics and contaminants on aquatic organisms is still not fully understood. Algae are key organisms in the aquatic ecosystem, serving as primary producers. The investigation of the toxic effects and mechanisms of micro/nanoparticles and pollutants on algae can contribute to understanding the impact on the aquatic ecosystem. Micro/nanoplastics inhibit algal growth, reduce chlorophyll and photosynthesis, induce ultrastructural changes, and affect gene expression in algae. The effects of energy flow can alter the productivity of aquatic organisms. The type, particle size, and concentration of micro/nanoparticles can influence their toxic effects on algae. Although there has been some research on the toxic effects of algae, the limited information has led to a significant lack of understanding of the underlying mechanisms. This paper provides a comprehensive review of the interactions between micro/nanoplastics, pollutants, and algae. The effects of various factors on algal toxicity are also analyzed. In addition, this article discusses the combined effects of microplastics, global warming, and oil pollution on algae and aquatic ecosystems in the context of global change. This research is of great importance for predicting future environmental changes. This review offers a more comprehensive understanding of the interactions between microplastics/nanoplastics and algae, as well as their impact on the carbon cycle.

Comparative toxicity assessment of individual, binary and ternary mixtures of SiO2, Fe3O4, and ZnO nanoparticles in freshwater microalgae, Scenedesmus obliquus: Exploring the role of dissolved ions

Metal oxide nanoparticles (NPs) are considered among the most prevalent engineered nanomaterials. To have a deeper understanding of the mode of action of multiple metal oxide nanoparticles in mixtures, we have used a unicellular freshwater microalga Scenedesmus obliquus as a model organism. The toxicity of silicon dioxide (SiO2), iron oxide (Fe3O4), and zinc oxide (ZnO) NPs was studied individually as well as in their binary (SiO2 + Fe3O4, Fe3O4 + ZnO, and ZnO + SiO2) and ternary (SiO2 + Fe3O4 + ZnO) combinations. The effects of metal ions from ZnO and Fe3O4 were investigated as well. The results observed from the study, showed that a significant amount of toxicity was contributed by the dissolved ions in the mixtures of the nanoparticles. Decreases in the cell viability, ROS generation, lipid peroxidation, antioxidant enzyme activity, and photosynthetic efficiency were analyzed. Among all the individual particles, ZnO NPs showed the maximum effects and increased the toxicities of the binary mixtures. The binary and ternary mixtures of the NPs clearly showed increased toxic effects in comparison with the individual entities. However, the ternary combination had lesser toxic effects than the binary combination of Fe3O4 + ZnO. The decline in cell viability and photosynthetic efficiency were strongly correlated with various oxidative stress biomarkers emphasizing the crucial role of reactive oxygen species in inducing the toxic effects. The findings from this study highlight the importance of evaluating the combinatorial effects of various metal oxide NPs as part of a comprehensive ecotoxicity assessment in freshwater microalgae.

Emerging micropollutants in aquatic ecosystems and nanotechnology-based removal alternatives: A review

There is a significant concern about the accessibility of uncontaminated and safe drinking water, a fundamental necessity for human beings. This concern is attributed to the toxic micropollutants from several emission sources, including industrial toxins, agricultural runoff, wastewater discharges, sewer overflows, landfills, algal blooms and microbiota. Emerging micropollutants (EMs) encompass a broad spectrum of compounds, including pharmaceutically active chemicals, personal care products, pesticides, industrial chemicals, steroid hormones, toxic nanomaterials, microplastics, heavy metals, and microorganisms. The pervasive and enduring nature of EMs has resulted in a detrimental impact on global urban water systems. Of late, these contaminants are receiving more attention due to their inherent potential to generate environmental toxicity and adverse health effects on humans and aquatic life. Although little progress has been made in discovering removal methodologies for EMs, a basic categorization procedure is required to identify and restrict the EMs to tackle the problem of these emerging contaminants. The present review paper provides a crude classification of EMs and their associated negative impact on aquatic life. Furthermore, it delves into various nanotechnology-based approaches as effective solutions to address the challenge of removing EMs from water, thereby ensuring potable drinking water. To conclude, this review paper addresses the challenges associated with the commercialization of nanomaterial, such as toxicity, high cost, inadequate government policies, and incompatibility with the present water purification system and recommends crucial directions for further research that should be pursued.

Impact and mitigation of lead, cadmium and micro/nano plastics in fragrant rice

Heavy metals (HMs) and micro(nano)plastics (MNPs), represent a significant risk to global food supply as well as a potential risk to humankind. Over 50% of the worldwide population eat rice every day, and rice aroma is a significant qualitative trait that is highly valued by consumers and fetches premium prices in the global market. Despite the huge commercial importance of fragrant rice, limited studies were directed to investigate the influence of HMs and MNPs on yield related traits and 2-Acetyl-1-pyrroline (2-AP) compound, mainly responsible for aroma production in fragrant rice. In this review, we found that the interaction of HMs and MNPs in fragrant rice is complex and accumulation of HMs and MNPs was higher in root as compared to the grains. Nutrients and phytohormones mediated mitigation of HMs and MNPs were most effective sustainable strategies. In addition, monitoring the checkpoints of 2-AP biosynthesis and its interaction with HMs and MNPs is challenging. Finally, we explained the potential challenges that fragrant rice faces considering the continuous rise in environmental pollutants and discussed the future avenues of research to improve fragrant rice's yield and qualitative traits.

The Combined Effect of Copper Nanoparticles and Microplastics on Transcripts Involved in Oxidative Stress Pathway in Rainbow Trout (Oncorhynchus Mykiss) Hepatocytes

Copper nanoparticles (CuNPs) and microplastics (MPs) are two emerging contaminants of freshwater systems. Despite their co-occurrence in many water bodies, the combined effects of CuNPs and MPs on aquatic organisms are not well-investigated. In this study, primary cultures of rainbow trout hepatocytes were exposed to dissolved Cu, CuNPs, MPs, or a combination of MPs and CuNPs for 48 h, and the transcript abundances of oxidative stress-related genes were investigated. Exposure to CuNPs or dissolved Cu resulted in a significant increase in the transcript abundances of two antioxidant enzymes, catalase (CAT) and superoxide dismutase (SOD). Exposure to CuNPs also led to an upregulation in the expression of Na+/K+ ATPase alpha 1 subunit (ATP1A1). Microplastics alone or in combination with CuNPs did not have a significant effect on abundances of the target gene transcripts. Overall, our findings suggested acute exposure to CuNPs or dissolved ions may induce oxidative stress in hepatocytes, and the Cu-induced effect on target gene transcripts was not associated with MPs.

Prospects of microalgae in nutraceuticals production with nanotechnology applications

Nutraceutical supplements provide health benefits, such as fulfilling the lack of nutrients in the human body or being utilized to treat or cure certain diseases. As the world population is growing, certain countries are experiencing food crisis challenges, causing natural foods are not sustainable to be used for nutraceutical production because it will require large-scale of food supply to produce enriched nutraceutics. The high demand for abundant nutritional compounds has made microalgae a reliable source as they can synthesize high-value molecules through photosynthetic activities. However, some microalgae species are limited in growth and unable to accumulate a significant amount of biomass due to several factors related to environmental conditions. Therefore, adding nanoparticles (NPs) as a photocatalyst is considered to enhance the yield rate of microalgae in an energy-saving and economical way. This review focuses on the composition of microalgal biomass for nutraceutical production, the health perspectives of nutritional compounds on humans, and the application of nanotechnology on microalgae for improved production and harvesting. The results obtained show that microalgal-based compounds indeed have better nutrients content than natural foods. However, nanotechnology must be further comprehended to make them non-hazardous and sustainable.

Sustainable fabrication of hybrid silver-copper nanocomposites (Ag-CuO NCs) using Ocimum americanum L. as an effective regime against antibacterial, anticancer, photocatalytic dye degradation and microalgae toxicity

In this study, a sustainable fabrication of hybrid silver-copper oxide nanocomposites (Ag-CuO NCs) was accomplished utilizing Ocimum americanum L. by one pot green chemistry method. The multifarious biological and environmental applications of the green fabricated Ag-CuO NCs were evaluated through their antibacterial, anticancer, dye degradation, and microalgae growth inhibition activities. The morphological features of the surface functionalized hybrid Ag-CuO NCs were confirmed by FE-SEM and HR-TEM techniques. The surface plasmon resonance λ_max peak appeared at 441.56 nm. The average hydrodynamic size distribution of synthesized nanocomposite was 69.80 nm. Zeta potential analysis of Ag-CuO NCs confirmed its remarkable stability at -21.5 mV. XRD and XPS techniques validated the crystalline structure and electron binding affinity of NCs, respectively. The Ag-CuO NCs demonstrated excellent inhibitory activity against Vibrio cholerae (19.93 ± 0.29 mm) at 100 μg/mL. Anticancer efficacy of Ag-CuO NCs was investigated against the A549 lung cancer cell line, and Ag-CuO NCs exhibited outstanding antiproliferative activity with a low IC₅₀ of 2.8 ± 0.05 μg/mL. Furthermore, staining and comet assays substantiated that the Ag-CuO NCs hindered the progression of the A549 cells and induced apoptosis as a result of cell cycle arrest at the G₀/G₁ phase. Concerning the environmental applications, the Ag-CuO NCs displayed efficient photocatalytic activity against eosin yellow degradation up to 80.94% under sunlight irradiation. Microalgae can be used as an early bio-indicator/prediction of environmental contaminants and toxic substances. The treatment of the Ag-CuO NCs on the growth of marine microalgae Tetraselmis suecica demonstrated the dose and time-dependent growth reduction and variations in the chlorophyll content. Therefore, the efficient multifunctional properties of hybrid Ag-CuO NCs could be exploited as a regime against infective diseases and cancer. Further, the findings of our investigation witness the remarkable scope and potency of Ag-CuO NCs for environmental applications.

Microplastics reduce microalgal biomass by decreasing single-cell weight: The barrier towards implementation at scale

Microplastics (MPs) are a widespread environmental threat, especially to aquatic and urban systems. Water quality is vital for biomass production in microalgal-based industries. Here, industrially relevant microalgae Tetraselmis suecica, Scenedesmus armatus, and Nannochloropsis gaditana were exposed to PS- and PE-MPs (polystyrene and polyethylene, respectively - 10-20 μm) contaminated waters (5 and 10 mg/L). Following industrial empirical and ecotoxicological procedures, the production period was established as four days (exponential growth phase). 27-long day experiments were conducted to determine the chronic effects of MPs contamination in microalgal biomass yields. MPs induced different responses in cell density: T. suecica decreased (up to 11 %); S. armatus showed no changes; and N. gaditana increased (up to 6 %). However, all three microalgae exhibited significant decreases in biomass production (up to 24, 48, and 52 %, respectively). S. armatus exposed to PS-MPs and N. gaditana exposed to PE-MPs were the most impacted regarding biomass production. The decrease in biomass yield was due to the reduction in single-cell weight (up to 14, 47, and 43 %), and/or the production of smaller-sized cells (T. suecica). In response to chronic exposure, microalgae showed signs of cell density adaptation. Despite cell density normalizing, biomass production was still reduced compared to biomass production in clean water. Computational modelling highlighted that MPs exposure had a concentration-dependent negative impact on microalgae biomass. The models allow the evaluation of the systematic risks that MPs impose in microalgal-based industries and stimulate actions towards implementing systems to contain/eliminate MPs contamination in the waters used in microalgae production.

Impact of disposable mask microplastics pollution on the aquatic environment and microalgae growth

The COVID-19 pandemic has mandated people to use medical masks to protect the public. However the improper management of disposable mask waste has led to the increase of marine pollution, in terms of water quality, and the decline in aquatic microorganisms. The aim of this research was to investigate the impact of disposable mask waste on fresh water and microalgae biomass quality. Disposable masks (untreated or treated with Enterococcus faecalis) were placed in 10-L glass reactors containing fresh water or water containing algal Chlorella sp. and its growth supplements (Chlorella medium) (four 10-L reactors in total) and kept in controlled conditions for 3 months. Water and biomass yield quality were evaluated using water quality analysis, spectroscopy, scanning electron microscopy (SEM), and proximate lipid and protein analysis. Disposable masks, incubated in either fresh water or Chlorella medium, affected several water quality parameters such as chemical oxygen demand (COD), biological oxygen demand (BOD), dissolved oxygen (DO), and pH. Microplastic identification revealed that some fibers were present in the water following a 100-day treatment process. Fourier transform-infrared spectroscopy (FTIR) analysis was used to determine the change in important, organic functional groups and highlighted the disappearance of a peak at 1530 cm^-1 corresponding to the primary protein (C-N) and the appearance of new peaks at 1651 cm^-1 and 1270 cm^-1 corresponding to methyl alcohol (CH₂OH) and ketone (C = O), respectively. This indicated the detrimental effect of disposable mask fragmentation on the biomass quality. The SEM investigation has shown a damage to the surface membrane of Chlorella sp. cells. Altogether, disposable masks decreased the water quality and damaged microalgae by inhibiting their growth. Therefore, the disposable mask contaminated by various microbes, after being used by a human, may be one of the most dangerous hazards to the environment.

Impact of Particulate Pollution on Aquatic Invertebrates

A serious global problem, air pollution poses a risk to both human and environmental health. It contains hazardous material like heavy metals, nanoparticles, and others that can create an impact on both land and marine environments. Particulate pollutants, which can enter water systems through a variety of ways, including precipitation and industrial runoff, can have a particularly adverse influence on aquatic invertebrates. Once in the water, these particles can harm aquatic invertebrates physically, physiologically, and molecularly, resulting in developmental problems and multi-organ toxicity. Further research at the cellular and molecular levels in numerous locations of the world is necessary to completely understand the impacts of particle pollution on aquatic invertebrates. Understanding how particle pollution affects aquatic invertebrates is vital as the significance of ecotoxicological studies on particulate contaminants increases. This review gives a comprehensive overview of the current understanding of how particle pollution affects aquatic invertebrates.

Polystyrene microplastics facilitate the biotoxicity and biomagnification of ZnO nanoparticles in the food chain from algae to daphnia

Ubiquitous microplastics (MPs) may affect the trophic transfer of nanoparticles (NPs), in turn threatening aquatic organisms and even human health. Thus, this study explored the influence of polystyrene microplastics (PS MPs) on the biotoxicity and biomagnification of ZnO nanoparticles (ZnO NPs) in the aquatic food chain from Chlorella vulgaris (C. vulgaris) to Daphnia magna (D. magna). The results showed that PS MPs facilitated the biotoxicity of ZnO NPs towards D. magna after dietary exposure. Compared to the control (single ZnO NPs), the heart rate and the level of reactive oxygen species were remarkably increased by 21.25% and 16.32% in the combined system (PS MPs + ZnO NPs), respectively. Notably, PS MPs suppressed the ZnO NPs accumulation in C. vulgaris, while remarkably facilitating the trophic transfer of ZnO NPs to D. magna. The biomagnification of ZnO NPs was evident with a maximal biomagnification factor (BMF) of 1.49 under acute dietary exposure of PS MPs (72 h), but was absent in the single ZnO NPs system (BMF <0.90). Moreover, PS MPs resulted in a larger biomagnification of ZnO NPs with a maximal BMF of 2.11 under chronic dietary exposure (21 days). Furthermore, the Zn element (including ZnO NPs and released Zn²⁺) was observed to accumulate in the intestine, thus causing ultrastructural damage and lipid droplet (LD) aggregate. Overall, these findings highlight the importance of considering the impact of MPs on co-existed pollutants and contribute to a better understanding of the ecological risks of MPs in aquatic ecosystems.

A critical review on the interaction of polymer particles and co-existing contaminants: Adsorption mechanism, exposure factors, effects on plankton species

This review considers the interaction of microplastics (MPs)/nanoplastics (NPs) and co-existing contaminants, including organic contaminants, potentially toxic elements (PTEs), and metal/metal-oxide nanoparticles. Stronger adsorption between plastic particles and co-existing contaminants can either facilitate or prevent more contaminants to enter plankton. The characteristics of MPs/NPs, such as polymer type, size, functional groups, and weathering, affect combined effects. Mixture toxicity is affected by those factors simultaneously and also affected by the type of co-existing contaminants, their concentrations, exposure time, dissolved organic matter, and surfactant. For co-exposure involving organics and metal nanoparticles, marine Skeletonema costatum generally had antagonistic effects, while marine Chlorella pyrenoidosa, Platymonas subcordiformis, and Tetraselmis chuii, showed synergistic effects. For co-exposure involving organics and PTEs, both Chlorella sp. and Microcystis aeruginosa generally demonstrated antagonistic effects. Freshwater Chlorella reinhardtii and Scenedesmus obliquus had synergistic effects for co-exposure involving metal/metal oxide nanoparticles. Zooplankton shows more unpredicted sensitivity towards the complex system. Different co-existing contaminants have different metabolism pathways. Organic contaminants could be biodegraded, which may enhance or alleviate mixture toxicity. PTEs could be adsorbed and desorbed under changing environments, and further affect the combined effects. The presence of metal/metal-oxide nanoparticles is more complicated, since some may release ion metals, increasing contaminant composition.

The co-occurrent microplastics and nano-CuO showed antagonistic inhibitory effects on bacterial denitrification: Interaction of pollutants and regulations on functional genes

The wide occurrence of microplastics (MPs) and nanoparticles resulted in their inevitable coexistence in environment. However, the joint effects of these two types of particulate emerging contaminants on denitrification have seldomly been investigated. Herein, non-biodegradable polyvinyl chloride, polypropylene, polyethylene and biodegradable polyhydroxyalkanoate (PHA) MPs were chosen to perform the co-occurrent effects with nano copper oxide (nano-CuO). Both the nano-CuO and MPs inhibited the denitrification process, and biodegradable PHA-MPs showed severer inhibition than non-biodegradable MPs. However, the presence of MPs significantly alleviated the inhibition of nano-CuO, suggesting an antagonistic effect. Other than MPs decreasing copper ion release from nano-CuO, MPs and nano-CuO formed agglomerations and induced lower levels of oxidative stress compared to individual exposure. Transcriptome analysis indicated that the co-occurrent MPs and nano-CuO induced different regulation on denitrifying genes (e. g. nar and nor) compared to individual ones. Also, the expressions of genes involved in denitrification-associated metabolic pathways, including glycolysis and NADH electron transfer, were down-regulated by nano-CuO or MPs, but exhibiting recovery under the co-occurrent conditions. This study firstly discloses the antagonistic effect of nano-CuO and MPs on environmental process, and these findings will benefit the systematic evaluation of MPs environmental behavior and co-occurrent risk with other pollutants.

Silicon Limitation Impairs the Tolerance of Marine Diatoms to Pristine Microplastics

Marine diatoms are currently facing increasing threats from microplastic (MP) pollution that is intertwined with the disturbed nutrient stoichiometry in seawater. The effects of nutrient imbalances such as silicon (Si) limitation on the interactions between diatoms and MPs remain poorly understood. In contrast to previous studies which mainly focused on MP toxicity, this study emphasizes how Si availability affects nano-scale interactions between pristine polystyrene MPs and diatom surfaces. Results showed that Si-starved cells were less tolerant to MP toxicity than the Si-enriched counterparts. Si limitation significantly changed the configuration and chemical composition of the perforated frustules, forming less negatively charged, more adhesive, and mechanically weaker cells. All of these changes facilitated the adsorption and hetero-aggregation between the diatom cells and MPs and compromised the diatoms' resistance to MP attack. Our study provides novel insights into the effects of pristine MPs in the marine environment under the context of dynamic nutrient conditions.

Effects of heavy metals on the adsorption of ciprofloxacin on polyethylene microplastics: Mechanism and toxicity evaluation

Microplastics are plastic particles less than 5 mm in diameter and are widely present in water environments. Their unique surface structures can adsorb coexisting pollutants in the surrounding environment, such as antibiotics and metal ions, leading to compound pollution. The adsorption of ciprofloxacin on polyethylene microplastics under different environmental conditions (pH and salinity) was investigated. The Freundlich model fitted well at 25 °C, indicating that the adsorption of ciprofloxacin by polyethylene microplastics was multilayered, and Fourier Transform infrared spectroscopy (FTIR) analysis indicated that the adsorption of ciprofloxacin by polyethylene microplastics was physical. The kinetic adsorption of ciprofloxacin on polyethylene microplastics followed a pseudo-second-order mode. Heavy metals (Cu²⁺, Cr³⁺, Cr⁶⁺, Cd²⁺, and Pb²⁺) affected the adsorption of ciprofloxacin by microplastics, which was related to the type and concentration of metal ions and the valence state of the ions. The acute toxicity of microplastics and the microplastic-ciprofloxacin-Cu²⁺ complex were evaluated using luminescent Photobacterium phosphoreum, demonstrating the polyethylene toxicity microplastic-ciprofloxacin-Cu²⁺ complex was mainly caused by Cu²⁺ and ciprofloxacin rather than microplastics. This study provides theoretical support for the environmental behavior and ecological effects of microplastics in aqueous environments.

Interactive adverse effects of low-density polyethylene microplastics on marine microalga Chaetoceros calcitrans

Low-density polyethylene (LDPE) is broadly utilized worldwide, increasing more dramatically during the COVID-19 pandemic, and the majority ends up in the aquatic environment as microplastics. The influence of polyethylene microplastics (LDPE-MPs) on aquatic ecosystems still needs further investigation, especially on microalgae as typical organisms represented in all aquatic systems and at the base of the trophic chain. Thereby, the biological and toxicity impacts of LDPE-MPs on Chaetoceros calcitrans were examined in this work. The results revealed that LDPE-MPs had a concentration-dependent adverse effect on the growth and performance of C. calcitrans. LDPE-MPs contributed the maximum inhibition rates of 85%, 51.3%, 21.49% and 16.13% on algal growth chlorophyll content, φPSII and Fv/Fm, respectively. The total protein content, superoxide dismutase (SOD), catalase (CAT) and peroxidase (POD) activities were significantly increased at 25 mg L-1 LDPE-MPs by 1.37, 3.52, 2.75 and 1.84 folds higher than those of the controls to sustain the adverse effects of LDPE-MPs. Extracellular polymeric substance (EPS) and monosaccharides contents of C. calcitrans were improved under low concentration of LDPE-MPs, which could facilitate the adsorption of MPs particles on the microalgae cell wall. This adsorption caused significant physical damage to the algal cell structure, as observed by SEM. These results suggest that the ecological footprint of MPs may require more attention, particularly due to the continuing breakdown of plastics in the ecosystem.

Polystyrene microplastics mitigate the embryotoxic damage of metformin and guanylurea in Danio rerio

Microplastics (MPs) alone may endanger the health and fitness of aquatic species through different mechanisms. However, the harmful effects of these when mixed with other emerging contaminants require additional research. Herein, we aimed to determine whether a mixture of MPs with metformin (MET) or guanylurea (GUA) might induce embryotoxicity and oxidative stress in Danio rerio. Upon exposure to mixtures, our results showed MPs reduced the mortality rate of MET and GUA in embryos. Moreover, the severity and the rate of malformations were also decreased in all mixtures with MPs. Concerning oxidative stress, our findings indicated MET, GUA, MPs, and the mixtures increased the levels of lipoperoxidation, hydroperoxide content, and protein carbonyl content in D. rerio larvae. However, the oxidative damage induced in all mixtures was lower than that produced by both drugs alone. Thus, it is likely that the accumulation of MPs avoided the entrance of MET and GUA into the embryos. Once the embryo hatched, MPs did only remain accumulated in the yolk sac of larvae and did not translocate to other organs. Our risk assessment analysis confirmed that MPs shrunk the damage produced by MET and GUA. In a nutshell, MPs mitigate the embryotoxic damage of metformin and guanylurea in D. rerio by blocking their entrance.

Potential Environmental and Health Implications from the Scaled-Up Production and Disposal of Nanomaterials Used in Biosensors

Biosensors often combine biological recognition elements with nanomaterials of varying compositions and dimensions to facilitate or enhance the operating mechanism of the device. While incorporating nanomaterials is beneficial to developing high-performance biosensors, at the stages of scale-up and disposal, it may lead to the unmanaged release of toxic nanomaterials. Here we attempt to foster connections between the domains of biosensors development and human and environmental toxicology to encourage a holistic approach to the development and scale-up of biosensors. We begin by exploring the toxicity of nanomaterials commonly used in biosensor design. From our analysis, we introduce five factors with a role in nanotoxicity that should be considered at the biosensor development stages to better manage toxicity. Finally, we contextualize the discussion by presenting the relevant stages and routes of exposure in the biosensor life cycle. Our review found little consensus on how the factors presented govern nanomaterial toxicity, especially in composite and alloyed nanomaterials. To bridge the current gap in understanding and mitigate the risks of uncontrolled nanomaterial release, we advocate for greater collaboration through a precautionary One Health approach to future development and a movement towards a circular approach to biosensor use and disposal.

Algae: a frontline photosynthetic organism in the microplastic catastrophe

Recalcitrancy in microplastics (MPs) contributes to white pollution. Bioremediation can remove MPs and facilitate environmental sustainability. Although recent studies have been conducted on the interaction of algae and MPs, the role of algae in MP removal with the simultaneous implementation of 'omics studies has not yet been discussed. Here, we review the adverse effects of MPs on the environment and possible approaches to remove them from the aquatic environment by using algae. We highlight the mechanism of MP biodegradation, the algal species that have been used, and how these are affected by MPs. We propose that algomics, characterization of biodegrading enzymes, and genetic engineering could be effective strategies for optimizing MP degradation.

Interaction of nanoplastics with simulated biological fluids and their effect on the biofilm formation

Over the last decade, it has become clear that the pollution by plastic debris presents global societal, environmental, and human health challenges. Moreover, humans are exposed to plastic particles in daily life and very limited information is available concerning human health, especially interactions with biological fluids. Therefore, the aim of this study is to investigate the interaction of plastic particles with simulated biological fluids (e.g., artificial saliva, artificial lysosomal fluid, phagolysosomal simulant fluid, and Gamble's solution) using various exposure stages (2 h to 80 h) and the effect of plastic particles on the formation of Staphylococcus aureus biofilms under simulated biological conditions. The plastic particles incubating various simulated biological fluids were characterized using surface functional groups, zeta potentials, and elemental composition. The results indicated that functional group indices (C-O, C = O, C-H, C = C, C-N, S = O, and OH) decreased compared to the control group during the incubation periods, except for the hydroxyl group index. The FTIR results showed that the hydroxyl group formed with the artificial lysosomal fluid, the phagolysosomal simulant fluid, and Gamble's solution. With the impact of the declining functional groups, the zeta potentials were more negative than in the control. Moreover, EDX results showed the release of the components in the particles with the interaction of simulated biological fluids as well as new components like P and Ca introduced to the particles. The biofilms were formed in the presence of nanoplastic particles under both controlled conditions and simulated biological conditions. The amount of biofilm formation was mainly affected by the surface characteristics under simulated biological conditions. In addition, the biofilm characteristics were influenced by the O/C and N/C ratios of the plastic particles with the impact of simulated biological fluids.

Ecotoxic effects of microplastics and contaminated microplastics - Emerging evidence and perspective

The high prevalence and persistence of microplastics (MPs) in pristine habitats along with their accumulation across environmental compartments globally, has become a matter of grave concern. The resilience conferred to MPs using the material engineering approaches for outperforming other materials has become key to the challenge that they now represent. The characteristics that make MPs hazardous are their micro to nano scale dimensions, surface varied wettability and often hydrophobicity, leading to non-biodegradability. In addition, MPs exhibit a strong tendency to bind to other contaminants along with the ability to sustain extreme chemical conditions thus increasing their residence time in the environment. Adsorption of these co-contaminants leads to modification in toxicity varying from additive, synergistic, and sometimes antagonistic, having consequences on flora, fauna, and ultimately the end of the food chain, human health. The resulting environmental fate and associated risks of MPs, therefore greatly depend upon their complex interactions with the co-contaminants and the nature of the environment in which they reside. Net outcomes of such complex interactions vary with core characteristics of MPs, the properties of co-contaminants and the abiotic factors, and are required to be better understood to minimize the inherent risks. Toxicity assays addressing these concerns should be ecologically relevant, assessing the impacts at different levels of biological organization to develop an environmental perspective. This review analyzed and evaluated 171 studies to present research status on MP toxicity. This analysis supported the identification and development of research gaps and recommended priority areas of research, accounting for disproportionate risks faced by different countries. An ecological perspective is also developed on the environmental toxicity of contaminated MPs in the light of multi-variant stressors and directions are provided to conduct an ecologically relevant risk assessment. The presented analyses will also serve as a foundation for developing environmentally appropriate remediation methods and evaluation frameworks.

Nano-ecotoxicology in a changing ocean

The ocean faces an era of change, driven in large by the release of anthropogenic CO2, and the unprecedented entry of pollutants into the water column. Nanomaterials, those particles < 100 nm, represent an emerging contaminant of environmental concern. Research on the ecotoxicology and fate of nanomaterials in the natural environment has increased substantially in recent years. However, commonly such research does not consider the wider environmental changes that are occurring in the ocean, i.e., ocean warming and acidification, and occurrence of co-contaminants. In this review, the current literature available on the combined impacts of nanomaterial exposure and (i) ocean warming, (ii) ocean acidification, (iii) co-contaminant stress, upon marine biota is explored. Here, it is identified that largely co-stressors influence nanomaterial ecotoxicity by altering their fate and behaviour in the water column, thus altering their bioavailability to marine organisms. By acting in this way, such stressors, are able to mitigate or elevate toxic effects of nanomaterials in a material-specific manner. However, current evidence is limited to a relatively small set of test materials and model organisms. Indeed, data is biased towards effects upon marine bivalve species. In future, expanding studies to involve other ecologically significant taxonomic groups, primarily marine phytoplankton will be highly beneficial. Although limited in number, the available evidence highlights the importance of considering co-occurring environmental changes in ecotoxicological research, as it is likely in the natural environment, the material of interest will not be the sole stressor encountered by biota. As such, research examining ecotoxicology alongside co-occurring environmental stressors is essential to effectively evaluating risk and develop effective long-term management strategies.

Copper Effect on Microalgae: Toxicity and Bioremediation Strategies

Microalgae are increasingly recognised as suitable microorganisms for heavy metal (HM) removal, since they are able to adsorb them onto their cell wall and, in some cases, compartmentalise them inside organelles. However, at relatively high HM concentrations, they could also show signs of stress, such as organelle impairments and increased activities of antioxidant enzymes. The main aim of this review is to report on the mechanisms adopted by microalgae to counteract detrimental effects of high copper (Cu) concentrations, and on the microalgal potential for Cu bioremediation of aquatic environments. Studying the delicate balance between beneficial and detrimental effects of Cu on microalgae is of particular relevance as this metal is widely present in aquatic environments facing industrial discharges. This metal often induces chloroplast functioning impairment, generation of reactive oxygen species (ROS) and growth rate reduction in a dose-dependent manner. However, microalgae also possess proteins and small molecules with protective role against Cu and, in general, metal stress, which increase their resistance towards these pollutants. Our critical literature analysis reveals that microalgae can be suitable indicators of Cu pollution in aquatic environments, and could also be considered as components of eco-sustainable devices for HM bioremediation in association with other organisms.

A Novel Impedimetric Sensor Based on Cyanobacterial Extracellular Polymeric Substances for Microplastics Detection

Cyanobacterial extracellular polymeric substances "EPS" have attracted intensive concern in biomedicine and food. Nevertheless, the use of those polymers as a sensor coating material has not yet been investigated mainly for microplastic detection. This study focuses on the application of EPS as a sensitive membrane deposited on a gold electrode and investigated with electrochemical impedance spectroscopy to detect four types of microplastics with a size range of 0.1 µm to 1 mm. The surface properties of this impedimetric sensor were investigated by Scanning electron microscopy, Fourier transforms infrared spectroscopy, and X-ray spectroscopy and, showed a high homogenous structure with the presence of several functional groups. The measurements showed a high homogenous structure with the presence of several functional groups. The EPS-based sensor could detect the four tested microplastics with a low limit of detection of 10^-11 M. It is the first report focusing on EPS extracted from cyanobacteria that could be a new quantification method for low concentrations of microplastics.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10924-022-02555-6.

Antidote or Trojan horse for submerged macrophytes: Role of microplastics in copper toxicity in aquatic environments

Due to their unique surface structures and physicochemical properties, microplastics (MPs) can adsorb other contaminants, thus impacting their toxicity and fate in aquatic ecosystems. In the present study, the adsorption and transportation of copper ions (Cu²⁺) in polyethylene (PE, 5 and 150 μm) and their combined effects on four submerged macrophyte species were assessed. Results demonstrated that the addition of PE reduced the Cu²⁺ concentration in copper sulfate (CuSO₄) solution and the adsorption of Cu²⁺ in PE (10 mg/L) increased with CuSO₄ concentration (100-600 μmol/L). PE alone exhibited no inhibitory effects on macrophytes, while Cu²⁺ showed fatal toxicity toward the macrophytes. However, the combination of PE and Cu²⁺ showed lower inhibitory effects on macrophytes and the toxicity attenuation varied among species. Additionally, PE may act as a carrier (like a Trojan horse) for the environmental transfer of Cu²⁺, thereby hosting Cu²⁺ toxicity against macrophytes in the imported environment. Our findings indicate that PE acts as both an antidote to and carrier of Cu²⁺ toxicity in macrophytes. This study should help in clarifying the combined effects and risk assessments of MPs and heavy metals in future studies.

Oxidative Stress in Far Eastern Mussel Mytilus trossulus (Gould, 1850) Exposed to Combined Polystyrene Microspheres (µPSs) and CuO-Nanoparticles (CuO-NPs)

The ingress of nanoparticles of metal oxides and microfragments of synthetic polymers (microplastics) into a marine environment causes unpredictable consequences. The effects of such particles cannot be predicted due to a lack of ecotoxicological information. In this research, a series of laboratory experiments were conducted on the combined effects of CuO-nanoparticles (CuO-NPs) and polystyrene microspheres (µPSs) on the development of oxidative stress processes in the marine filter-feeder mollusk Mytilus trossulus. Biomarkers of oxidative stress, including the lysosome membrane stability of hematocytes (LMS), the index of antioxidant activity (IAA), the levels of malonaldehyde (MDA) and protein carbonyls (PCs), and DNA damage in digestive gland cells, were measured after 5 days of exposure. Based on a battery of biochemical markers, it was shown that oxidative stress was induced at varying degrees in the experimental mollusks when exposed to CuO-NPs and µPSs both separately and in combination. In contrast, the single-treatment effect on the lysosomal membrane was enhanced by the combined CuO-NPs and µPSs (from 77.14 ± 8.56 to 42 ± 4.26 min). In addition, exposure to both the compounds alone and in combination decreased the IAA (from 22.87 ± 1.25, to 19.55 ± 0.21, 10.73 ± 0.53, and 12.06 ± 1.62 nM/mg protein, respectively). The PC level significantly increased only after CuO-NP exposure (from 0.496 ± 0.02 to 0.838 ± 0.03 μM/mg protein). Furthermore, the results showed that the investigated particles, both alone and in combination, promoted DNA damage in digestive gland cells (from 2.02 ± 0.52 to 5.15 ± 0.37, 18.29 ± 2.14, and 10.72 ± 2.53%, respectively), indicating that these compounds are genotoxic. Overall, the results obtained suggest that oxidative stress is the leading factor in the negative effects of CuO-NPs and µPSs. Considering the exceptional role of genome integrity in the functioning of biological systems, the revealed damages in the DNA molecule structure should be attributed to the most important manifestations of the toxicity of these two forms of marine pollution.

A review on the diverse interactions between microalgae and nanomaterials: Growth variation, photosynthetic performance and toxicity

Vast improvements in nanotechnology have led to the wide usage of nanomaterials (NMs) in daily products. This study reviews the interactions between NMs and microalgae in terms of impacts on growth and photosynthetic efficiency, and their toxicity on microalgae. All types of NMs such as carbon-based NMs (CNMs), metal oxide-based NMs (MONMs) and noble metal-based NMs (NMNMs) improve microalgal growth and photosynthetic efficiency at low concentration, typically ranging between 1 and 15 mg/L depending on the type of NMs, due to hormetic responses by microalgae. Higher concentrations of NMs have been found to reduce photosynthetic efficiency and subsequent growth inhibition of microalgae. MONMs-microalgae and NMNMs-microalgae interactions focus on membrane alteration, whereas carbon-based NMs-microalgae focus more on shading effect. The toxicity of each type of NMs on microalgae is in the order rGO > GO > MG > CNT for carbon-based NMs, ZnO > TiO₂ > CuO > Fe₂O₃ for MONMs and Ag > Au > Pt for NMNMs. Incorporation of NMs in microalgae are seen to have promising future on producing higher microalgae yield with increased economic efficiency.

Phytotoxicity of binary nanoparticles and humic acid on Lactuca sativa L

Nanoplastics and metal oxide nanoparticles are serious threats that inevitably enter the environment. Their similar particle properties likely lead to interaction and thus cause more unpredictable ecotoxicity to organisms. In this study, it was found that polystyrene nanoplastics (PS NPs) aggravate the toxic effect of iron oxide nanoparticles (Fe2O3 NPs) on Lactuca sativa L. by inducing severe oxidative stress and root deformation, and the expansion of damaged cells from the xylem to the epidermis was observed using confocal laser scanning. Exposure to PS NPs + Fe2O3 NPs correspondingly elevated iron accumulation in the roots and leaves by 1.39 and 1.17 times compared to the amount observed with Fe2O3 NPs individually. Examination of the physicochemical properties, iron ion release, and molecular interactions of the NPs indicated that PS NPs interact with Fe2O3 NPs to form heteroaggregates and facilitate leaching of iron ions, which resulted in aggravating the toxic effect. These were alleviated by the addition of humic acid (HA), which dispersed the heteroaggregates and reduced the release of iron ions. The findings in the present study provide new perspectives for the ecotoxicological risk of binary nano-pollution in the natural environment.

Effects of polystyrene microplastics on copper toxicity to the protozoan Euglena gracilis: emphasis on different evaluation methods, photosynthesis, and metal accumulation

Microplastics (MPs) released into aquatic environment interact with other pollutants that already exist in water, potentially altering their toxicity, which poses a new problem for aquatic ecosystems. In the present study, we first evaluated the effects of polystyrene MPs (mPS) on copper (Cu) toxicity to the protozoan Euglena gracilis using three methods based on 96-h acute toxicity, orthogonal test and 12-d sub-acute toxicity data. Thereafter, the 12-d sub-acute exposure was employed to investigate protozoan growth, photosynthetic parameters and pigments, soluble protein, total antioxidant capacity and trace metal accumulation in E. gracilis after exposure to either 1.5 mg/L of Cu, 75-nm mPS (1 and 5 mg/L) or a combination therein, with the objective to understand the underlined mechanisms. The results show that the concentration and exposure time are key factors influencing the effects of the mPS on Cu toxicity. A mPS concentration of 5 mg/L caused significantly more dissipation energy, which is used for photosynthesis and thus decreased photosynthetic efficiency, but this effect weakened after 12 d of exposure. Exposure to Cu alone resulted in significantly high Cu accumulation in the cells and inhibited uptake of manganese and zinc. The presence of mPS did not influence the effects of Cu on trace metal accumulation. Our result suggests that application of multiple methods and indices could provide more information for a comprehensive understanding of the effects of mPS on toxicity of other pollutants. In addition, long-term exposure seems necessary for evaluating mPS toxicity.

The protective layer formed by soil particles on plastics decreases the toxicity of polystyrene microplastics to earthworms (Eisenia fetida)

The recent discovery of microplastics contaminants in most ecosystems has raised major health issues, yet knowledge on their impact on soil organisms is limited, especially their toxicity evolution with aging. Herein, the toxicity of polystyrene microplastic (PS-MP) to earthworm (Eisenia fetida) along with aging was investigated. Results showed that the 28 d-LC₅₀ (50% lethal concentration) of PS-MP was 25.67 g kg^-1, whereas that increased to 96.47 g kg^-1 after PS-MP initially aged in soil for 28 days, indicating the toxicity of PS-MP decreased with aging. Laser scanning confocal microscope and scanning electron microscope (SEM) found that the toxicity of PS-MP to earthworm may be due to the ingestion of PS-MP by earthworms and the physical damage (e.g., epidermis abrasion and setae loss) of PS-MP to earthworms. Similarly, the levels of reactive oxygen species, antioxidant enzyme activities and malondialdehyde content increased with PS-MP concentrations from 0.1 to 1.5 g kg^-1, but decreased with aging from 7 to 28 days. The integrated biomarker response index also confirmed that the toxicity of PS-MP decreased with aging. SEM found that PS-MP were progressively covered by soil particles during soil aging, inducing the formation of protective layer and increasing the particle size of PS-MP, which prevented direct contact with earthworms and decreased the ingestion of PS-MP, in turn decreased PS-MP toxicity. Overall, our study provides valuable insights for elucidating the effect of aging on the toxicity of microplastics.

Binational survey of personal protective equipment (PPE) pollution driven by the COVID-19 pandemic in coastal environments: Abundance, distribution, and analytical characterization

In the present contribution, two nationwide surveys of personal protective equipment (PPE) pollution were conducted in Peru and Argentina aiming to provide valuable information regarding the abundance and distribution of PPE in coastal sites. Additionally, PPE items were recovered from the environment and analyzed by Fourier transformed infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM) with Energy dispersive X-ray (EDX), and X-ray diffraction (XRD), and compared to brand-new PPE in order to investigate the chemical and structural degradation of PPE in the environment. PPE density (PPE m^-2) found in both countries were comparable to previous studies. FTIR analysis revealed multiple polymer types comprising common PPE, mainly polypropylene, polyamide, polyethylene terephthalate, and polyester. SEM micrographs showed clear weathering signs, such as cracks, cavities, and rough surfaces in face masks and gloves. EDX elemental mapping revealed the presence of elemental additives, such as Ca in gloves and face masks and AgNPs as an antimicrobial agent. Other metals found on the surface of PPE were Mo, P, Ti, and Zn. XRD patterns displayed a notorious decrease in the crystallinity of polypropylene face masks, which could alter its interaction with external contaminants and stability. The next steps in this line of research were discussed.

Current status of microplastics pollution in the aquatic environment, interaction with other pollutants, and effects on aquatic organisms

Microplastics, as emerging pollutants, have received great attention in the past few decades due to its adverse effects on the environment. Microplastics are ubiquitous in the atmosphere, soil, and water bodies, and mostly reported in aqueous environment. This paper summarizes the abundance and types of microplastics in different aqueous environments and discusses the interactions of microplastics with other contaminants such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), antibiotics, and heavy metals. The toxicity of microplastics to aquatic organisms and microorganisms is addressed. Particularly, the combined toxic effects of microplastics and other pollutants are discussed, demonstrating either synergetic or antagonistic effects. Future prospectives should be focused on the characterization of different types and shapes of microplastics, the standardization of microplastic units, exploring the interaction and toxicity of microplastics with other pollutants, and the degradation of microplastics, for a better understanding of the ecological risks of microplastics.

Particles rather than released Zn2+ from ZnO nanoparticles aggravate microplastics toxicity in early stages of exposed zebrafish and their unexposed offspring

Knowledge on the interaction between microplastics (MPs) and zinc oxide nanoparticles (ZnO NPs) is limited. Here, we investigated effects of embryo-larvae exposure to 500 μg/L polystyrene MPs (5 µm), 1200 μg/L ZnO NPs (< 100 nm), 500 μg/L dissolved Zn²⁺ from ZnSO4^, and the mixtures of MPs and ZnO NPs or ZnSO4 on exposed F0 larvae and unexposed F1 larvae. Consequently, ZnO particles adhered to MPs surfaces rather than Zn²⁺, and increased Zn transport into larvae. Growth inhibition, oxidative stress, apoptosis, and disturbance of growth hormone and insulin-like growth factor (GH/IGF) axis were induced by MPs and ZnO NPs alone, which were further aggravated by their co-exposure in F0 larvae. MPs + ZnO increased apoptotic cells in the gill and esophagus compared with MPs and ZnO NPs alone. Reduced growth and antioxidant capacity and down-regulated GH/IGF axis were merely observed in F1 larvae from F0 parents exposed to MPs + ZnO. Contrary to ZnO NPs, dissolved Zn²⁺ reversed MPs toxicity, suggesting the protective role of Zn²⁺ may be not enough to ameliorate thfie negative effects of ZnO particles. To summarize, we found that particles rather than released Zn²⁺ from ZnO nanoparticles amplified MPs toxicity in early stages of exposed zebrafish and their unexposed offspring.

Towards understanding the impact of plastics on freshwater and marine microalgae: A review of the mechanisms and toxicity endpoints

Plastics are ubiquitous and persistent in aquatic environments, threatening environmental and human health. This review focused on the effects of plastics (single toxicity) and associated chemicals (combined or leachate toxicities) on freshwater and marine microalgae. Forty-seven publications from 2010 to 2020 were used in this review. Based on their topic of focus, we classified the publications among the following categories: single plastic toxicity, combined toxicity of plastics and other chemicals, and toxicity of leachates released from plastics. The test species Chlorophyta and Ochrophyta were generally used to assess the impacts of plastics on aquatic microalgae. This study identified the inhibition of algal growth and photosynthesis due to single toxicity through the physical adsorption of plastics, showing that leachates released from plastics contained non-specific chemicals which could potentially affect microalgae. Production of malondialdehyde or reactive oxygen species presented significant effects on algae independent of the experimental conditions. This review could improve our understanding of the effects of plastic pollution on microalgae in freshwater and marine environments. It has implications for further research in this field and associated water management in light of the global ubiquity of plastic pollution.

The effects of copper ions and copper nanomaterials on the output of amino acids from marine microalgae

In this study, the marine microalgae Skeletonema costatum and Nitzschia closterium were exposed to different forms of copper, such as a metal salt (Cu²⁺), a nano-metal (nano-Cu), and nano-metal oxide (nano-CuO). During a 96-h exposure to nanoparticles (NPs) and salt, the cell number, Cu²⁺ concentration in the culture medium, morphology, and intracellular amino acids were measured to assess the toxicity of the copper materials and the toxicity mechanism of the NPs. As results, the toxicity of Cu²⁺, nano-Cu, and nano-CuO to marine phytoplankton decreased in order. The EC₅₀ values of Cu²⁺ and nano-Cu for S. costatum and N. closterium ranged from 0.356 to 0.991 mg/L and 0.663 to 2.455 mg/L, respectively. Nano-Cu inhibits the growth of marine phytoplankton by releasing Cu²⁺; however, nano-CuO is harmful to microalgae because of the effect of NPs. The secretion of extracellular polymeric substances by microalgae could also affect the toxicity of nano-Cu and nano-CuO to microalgae. S. costatum was more sensitive to copper than N. closterium. Cu²⁺, nano-Cu, and nano-CuO all reduced per-cell amino acids and the total output of algae-derived amino acids by affecting the growth of the phytoplankton. This study helps to understand the risk assessment of nano-Cu and nano-CuO to marine microalgae.

Combined effects of copper and microplastics on physiological parameters of Tubastrea aurea corals

Microplastics (MPs) have been a serious environmental problem because it can carry pollution like heavy metals and organic pollutants. However, the combined effect of MPs and bivalent copper ion (Cu(II)) on the coral azooxanthellate has been rarely studied. In the present study, the combined effects of PVC and Cu(II) on the physiological responses of Tubastrea aurea were studied. Our results showed that MPs alone enhanced the activity of catalase (CAT), superoxide dismutase (SOD), and reduced glutathione (GSH). The mixture groups had the same effects on the CAT and GSH, which enhanced CAT and GSH activity by 97% and 53% respectively. MPs alone and the combined treatment groups decreased the activity of lipid peroxide (LPO) and the content of metallothionein (MT) by 45% and 20% of the coral Tubastrea aurea. Cu(II) exposure always had negative effect on the physiological parameters of coral, and MPs decreased the toxicity of Cu(II) in the combined groups. This work is the first time to report the combined effects of Cu(II) and microplastics on azooxanthellate coral, which will provide important preliminary data for the following research.

Critical review of the characteristics, interactions, and toxicity of micro/nanomaterials pollutants in aquatic environments

A wide range of contaminants of emerging concern such as micro/nanoplastics (MPs/PNPs) and metal-nanoparticles (Me-NPs) from anthropogenic activities have been identified in aquatic environments. The hazardous effects of these micro/nanomaterials as pollutants in organisms and the lack of knowledge about their behavior in aquatic environments have generated growing concern in the scientific community. The nanomaterials have a colloidal-type behavior due to their size range but with differences in their physicochemical properties. This review comprises the behavior of micro/nanomaterials pollutants and the physicochemical interactions between MPs/PNPs and Me-NPs in aquatic environments, and their potential toxicological effects in organisms. Moreover, this article describes the potential use of Me-NPs to remove MPs/PNPs present in the water column due to their photocatalytic and magnetic properties. It also discusses the challenge to determine harmful effects of micro/nanomaterials pollutants in organisms and provides future research directions to improve integrated management strategies to mitigate their environmental impact.

Toxic effect of BDE-47 on the marine alga Skeletonema costatum: Population dynamics, photosynthesis, antioxidation and morphological changes

The toxic effects of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) on the marine alga Skeletonema costatum were studied, including the population dynamics, chlorophyll fluorescence characteristics, pigment content, superoxide dismutase (SOD) activity, malondialdehyde (MDA) content and morphology. High doses (200-600 μg L^-1) of BDE-47 significantly suppressed the population growth of S. costatum, with a 96 h EC₅₀ value of 293 μg L^-1. Photosynthetic parameters (F_v/F_m, rETR_max and Φ_PSⅡ) of photosystem II (PSII) were significantly inhibited with increasing BDE-47 concentrations. The chlorophyll c (chl c) concentration was also inhibited by exposure to BDE-47. In contrast, chl a and carotenoid concentrations were elevated after exposure to high concentrations of BDE-47 for 72 and 96 h. The SOD activity was generally higher at concentrations of 100-600 μg L^-1 than those of the control when the exposure time was less than 48 h. With increasing time, the SOD activity generally decreased, and significantly higher SOD activity only occurred in the treatment with high doses of BDE-47. High MDA contents occurred after exposure for 96 h in all BDE-47 treatments. With increasing BDE-47 concentrations, drastic deformation of the silicious valve and detachment of the strutted processes were found. In addition, drastic decreases in the BDE-47 concentration in culture medium indicated the bioaccumulation of BDE-47 by S. costatum. Our results revealed multiple responses of S. costatum to BDE-47 exposure, and indicated the potential risk of BDE-47 in the East China Sea based on these responses.

Uptake and toxicity of polystyrene micro/nanoplastics in gastric cells: Effects of particle size and surface functionalization

Toxicity of micro or nanoplastics (MP/NP) in aquatic life is well-documented, however, information about the consequences of exposure to these particles in terrestrial species is scarce. This study was used to evaluate the uptake and/or toxicity of polystyrene MP/NP in human gastric cells, comparing doses, particle sizes (50, 100, 200, 500, 1000 or 5000 nm) and surface functionalization (aminated, carboxylated or non-functionalized). In general, the uptake of 50 nm particles was significantly higher than 1000 nm particles. Among the 50 nm particles, the aminated particles were more avidly taken up by the cells and were cytotoxic at a lower concentration (≥ 7.5 μg/mL) compared to same sized carboxylated or non-functionalized particles (≥ 50 μg/mL). High toxicity of 50 nm aminated particles corresponded well with significantly high rates of apoptosis-necrosis induced by these particles in 4 h (29.2% of total cells) compared to all other particles (≤ 16.8%). The trend of apoptosis-necrosis induction by aminated particles in 4 h was 50 > 5000 > 1000 > 500 > 200 > 100 nm. The 50 nm carboxylated or non-functionalized particles also induced higher levels of apoptosis-necrosis in the cells compared to 100, 1000 and 5000 nm particles with same surface functionalization but longer exposure (24 h) to 50 nm carboxylated or non-functionalized particles significantly (p<0.0001) increased apoptosis-necrosis in the cells. The study demonstrated that the toxicity of MP/NP to gastric cells was dependent on particle size, dose surface functionalization and exposure period.