Nanomaterials in the environment, human exposure pathway, and health effects: A review

Nanotechnology in sustainable agriculture: A double-edged sword

Nanotechnology is a rapidly developing discipline that has the potential to transform the way we approach problems in a variety of fields, including agriculture. The use of nanotechnology in sustainable agriculture has gained popularity in recent years. It has various applications in agriculture, such as the development of nanoscale materials and devices to boost agricultural productivity, enhance food quality and safety, improve the efficiency of water and nutrient usage, and reduce environmental pollution. Nanotechnology has proven to be very beneficial in this field, particularly in the development of nanoscale delivery systems for agrochemicals such as pesticides, fertilizers, and growth regulators. These nanoscale delivery technologies offer various benefits over conventional delivery systems, including better penetration and distribution, enhanced efficacy, and lower environmental impact. Encapsulating agrochemicals in nanoscale particles enables direct delivery to the targeted site in the plant, thereby reducing waste and minimizing off-target effects. Plants are fundamental building blocks of all ecosystems and evaluating the interaction between nanoparticles (NPs) and plants is a crucial aspect of risk assessment. This critical review therefore aims to provide an overview of the latest advances regarding the positive and negative effects of nanotechnology in agriculture. It also explores potential future research directions focused on ensuring the safe utilization of NPs in this field, which could lead to sustainable development. © 2024 Society of Chemical Industry.

Inflammatory bowel disease alters in vivo distribution of orally administrated nanoparticles: Revealing via SERS tag labeling technique

Nanoparticles (NPs) could be uptake orally and exposed to digestive tract through various sources such as particulate pollutant, nanomedicine and food additive. Inflammatory bowel disease (IBD), as a global disease, induced disruption of the intestinal mucosal barrier and thus altered in vivo distribution of NPs as a possible consequence. However, related information was relatively scarce. Herein, in vivo distribution of typical silica (SiO2) and titania (TiO2) NPs was investigated in healthy and IBD models at cell and animal levels via a surface-enhanced Raman scattering (SERS) tag labeling technique. The labeled NPs were composed of gold SERS tag core and SiO2 (or TiO2) shell, demonstrating sensitive and characteristic SERS signals ideal to trace the NPs in vivo. Cell SERS mapping revealed that protein corona from IBD intestinal fluid decreased uptake of NPs by lipopolysaccharide-induced RAW264.7 cells compared with normal intestinal fluid protein corona. SERS signal detection combined with inductively coupled plasma mass spectrometry (ICP-MS) analysis of mouse tissues (heart, liver, spleen, lung and kidney) indicated that both NPs tended to accumulate in lung specifically after oral administration for IBD mouse (6 out of 20 mice for SiO2 and 4 out of 16 mice for TiO2 were detected in lung). Comparatively, no NP signals were detected in all tissues from healthy mice. These findings suggested that there might be a greater risk associated with the oral uptake of NPs in IBD patients due to altered in vivo distribution of NPs.

Microplastic characterization and assessment of removal efficiency in an urban and industrial wastewater treatment plant with submarine emission discharge

Wastewater treatment plants (WWTPs) are significant contributors to microplastic (MP) pollution in marine ecosystems when they are inefficient. This study aimed to evaluate the effectiveness of microplastic removal from the effluent of the Anza WWTP (Morocco), which processes industrial and urban wastewater using a lamellar decantation system combined with a submarine emissary for treated water discharge. Additionally, this study investigated the presence of microplastics in the Atlantic seawater where treatment plant effluent is released. Microplastics were collected and extracted from wastewater and seawater samples to assess their abundance, shape, size, polymer type, and removal rates in the treatment plant. The findings revealed an average MP concentration of 1114 ± 90 MPs/L in the influent and 607 ± 101 MPs/L in the effluent, indicating a removal efficiency of 46 %. Seasonal analysis revealed the highest MP concentrations during the summer, with 2181.33 MPs/L in the influent and 1209 MPs/L in the effluent. Seawater samples from the discharge zone of the submarine emissary had an average MP concentration of 1600 MPs/m3. Characterization of the MPs revealed that fibers were the most common form of MPs in all the samples. The 500-100 μm size fraction was predominant in the WWTP samples, while MPs smaller than 1 mm were more abundant in the seawater samples. Seven polymer types were identified using attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), with PET, PE, PVC, PA, PS, PP, and EVA being the most prevalent. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDX) revealed various degrees of weathering and chemical elements adhering to the MP surfaces. The results of this study provide valuable insights into the effectiveness of conventional treatment systems in removing microplastics and offer a reference for developing management strategies to mitigate MP pollution in Morocco's marine ecosystems.

Nanotechnology in medicine revolutionizing drug delivery for cancer and viral infection treatments

Advancements in nanotechnology were vastly applied in medicine and pharmacy, especially in the field of nano-delivery systems. It took a long time for these systems to ensure precise delivery of very delicate molecules, such as RNA, to cells at concentrations that yield remarkable efficiency, with success rates reaching 95.0% and 94.5%. These days, there are several advantages of using nanotechnological solutions in the prevention and treatment of cancer and viral infections. Its interventions improve treatment outcomes both due to increased effectiveness of the drug at target location and by reducing adverse reactions, thereby increasing patient adherence to the therapy. Based on the current knowledge an updated review was made, and perspective, opportunities and challenges in nanomedicine were discussed. The methods employed include comprehensive examination of existing literature and studies on nanoparticles and nano-delivery systems including both in vitro tests performed on cell cultures and in vivo assessments carried out on appropriate animal models, with a specific emphasis on their applications in oncology and virology. This brings together various aspects including both structure and formation as well as its association with characteristic behaviour in organisms, providing a novel perspective. Furthermore, the practical application of these systems in medicine and pharmacy with a focus on viral diseases and malignancies was explored. This review can serve as a valuable guide for fellow researchers, helping them navigate the abundance of findings in this field. The results indicate that applications of nanotechnological solutions for the delivery of medicinal products improving therapeutic outcomes will continue to expand.

Agriculture and environmental management through nanotechnology: Eco-friendly nanomaterial synthesis for soil-plant systems, food safety, and sustainability

Through the advancement of nanotechnology, agricultural and food systems are undergoing strategic enhancements, offering innovative solutions to complex problems. This scholarly essay thoroughly examines nanotechnological innovations and their implications within these critical industries. Traditional practices are undergoing radical transformation as nanomaterials emerge as novel agents in roles traditionally filled by fertilizers, pesticides, and biosensors. Micronutrient management and preservation techniques are further enhanced, indicating a shift towards more nutrient-dense and longevity-oriented food production. Nanoparticles (NPs), with their unique physicochemical properties, such as an extraordinary surface-to-volume ratio, find applications in healthcare, diagnostics, agriculture, and other fields. However, concerns about their potential overuse and bioaccumulation raise unanswered questions about their health effects. Molecule-to-molecule interactions and physicochemical dynamics create pathways through which nanoparticles cause toxicity. The combination of nanotechnology and environmental sustainability principles leads to the examination of green nanoparticle synthesis. The discourse extends to how nanomaterials penetrate biological systems, their applications, toxicological effects, and dissemination routes. Additionally, this examination delves into the ecological consequences of nanomaterial contamination in natural ecosystems. Employing robust risk assessment methodologies, including the risk allocation framework, is recommended to address potential dangers associated with nanotechnology integration. Establishing standardized, universally accepted guidelines for evaluating nanomaterial toxicity and protocols for nano-waste disposal is urged to ensure responsible stewardship of this transformative technology. In conclusion, the article summarizes global trends, persistent challenges, and emerging regulatory strategies shaping nanotechnology in agriculture and food science. Sustained, in-depth research is crucial to fully benefit from nanotechnology prospects for sustainable agriculture and food systems.

Potential Effects of Environmental and Occupational Exposure to Microplastics: An Overview of Air Contamination

Microplastics (MPs) are now ubiquitous environmental contaminants that lead to unavoidable human exposure; they have received increasing attention in recent years and have become an emerging area of research. The greatest concern is the negative impacts of MPs on marine, fresh-water, and terrestrial ecosystems, as well as human health, to the extent that the World Health Organization (WHO) calls for increased research and standardized methods to assess exposure to MPs. Many countries and international organizations are implementing or proposing legislation in this regard. This review aims to summarize the current state of legislation, indoor and outdoor contamination, and potential human health risk due to exposure to airborne MPs, considering that occupational exposure to MPs is also becoming a growing area of concern. Even though research regarding MPs has continuously increased in the last twenty years, the effects of MPs on human health have been scarcely investigated, and toxicity studies are still limited and not directly comparable, due to the lack of standardized studies in this field.

Surface engineering of multifunctional nanostructured adsorbents for enhanced wastewater treatment: A review

Rapid urbanization and industrialization have significantly contributed to the contamination of the environment through the discharge of wastewater containing various pollutants. The development of high-performance surface functional nanostructured adsorbents is of wide interest for researchers. Therefore, we explore the significant advancements in this field, focusing on the efficiency of nanostructured materials, as well as their nanocomposites, for wastewater treatment applications. The crucial role of surface modification in enhancing the affinity of these nanostructured adsorbents towards targeted pollutants, addressing a key bottleneck in the utilization of nanomaterials for wastewater treatment, was specifically emphasized. In addition to highlighting the advantages of surface engineering in enhancing the efficiency of nanostructured adsorbents, this review also provides a comprehensive overview of the limitations and challenges associated with surface-modified nanostructured adsorbents, including high cost, low stability, poor scalability, and potential nanotoxicity. Addressing these limitations is essential for realizing the commercial viability of these state-of-the-art materials for large-scale wastewater treatment applications. This review also thoroughly discusses the potential scalability and environmental safety aspects of surface-modified nanostructured adsorbents, offering insights into their future prospects for wastewater treatment. It is believed that this review will contribute significantly to the existing body of knowledge in the field and provide valuable information for researchers and practitioners working in the area of environmental remediation and nanomaterials.

Low concentrations of selenium nanoparticles enhance the performance of a generalist parasitoid and its host, with no net effect on host suppression

BACKGROUND

The environmental and economic costs of conventional insecticides have stirred an interest in alternative management tactics, including the use of nanotechnologies. Selenium nanoparticles (SeNPs) have many applications in agriculture but may not be compatible with biological control; however, low concentrations of SeNPs may benefit natural enemies via hormesis. This study investigates the concentration-dependent effects of SeNPs (0-1000 mg L-1 ) on Anisopteromalus calandrae (Howard) (Hymenoptera: Pteromalidae), a generalist parasitoid of stored product pests.

RESULTS

The LC50 of SeNPs was 1540 mg L-1 for female parasitoids and 1164 mg L-1 for males. SeNPs had a significant hormetic effect; average lifespan increased by 10% at a concentration of 4.03 mg L-1 for females and by 35% at 13.83 mg L-1 for males. In a bioassay including hosts [the azuki bean beetle, Callosobruchus chinensis (L.) (Coleoptera: Chrysomelidae: Bruchinae)], a low concentration of SeNPs (25 mg L-1 ) enhanced the performance of female parasitoids; lifespan increased by 23% and the number of offspring increased by 88%. However, the number of emerging hosts did not significantly decrease; in the absence of parasitism, SeNPs actually improved host emergence by 17%.

CONCLUSION

Because higher concentrations of SeNPs reduced parasitoid lifespan, whereas low concentrations enhanced not only parasitoid performance but also host emergence, practitioners should exercise caution when considering SeNPs for use in integrated pest management. © 2023 Society of Chemical Industry.

Application of manganese oxide-based materials for arsenic removal: A review

In the context of growing arsenic (As) contamination in the world, there is an urgent need for an effective treatment approach to remove As from the environment. Industrial wastewater is one of the primary sources of As contamination, which poses significant risks to both microorganisms and human health, as the presence of As can disrupt the vital processes and synthesis of crucial macromolecules in living organisms. The global apprehension regarding As presence in aquatic environments persists as a key environmental issue. This review summarizes the recent advances and progress in the design, strategy, and synthesis method of various manganese-based adsorbent materials for As removal. Occurrence, removal, oxidation mechanism of As(III), As adsorption on manganese oxide (MnOx)-based materials, and influence of co-existing solutes are also discussed. Furthermore, the existing knowledge gaps of MnOx-based adsorbent materials and future research directions are proposed. This review provides a reference for the application of MnOx-based adsorbent materials to As removal.

Black phosphorus quantum dots induce myocardial inflammatory responses and metabolic disorders in mice

As an ultrasmall derivative of black phosphorus (BP) sheets, BP quantum dots (BP-QDs) have been effectively used in many fields. Currently, information on the cardiotoxicity induced by BP-QDs remains limited. We aimed to evaluate BP-QD-induced cardiac toxicity in mice. Histopathological examination of heart tissue sections was performed. Transcriptome sequencing, real-time quantitative PCR (RT‒qPCR), western blotting, and enzyme-linked immunosorbent assay (ELISA) assays were used to detect the mRNA and/or protein expression of proinflammatory cytokines, nuclear factor kappa B (NF-κB), phosphatidylinositol 3 kinase-protein kinase B (PI3K-AKT), peroxisome proliferator-activated receptor gamma (PPARγ), and glucose/lipid metabolism pathway-related genes. We found that heart weight and heart/body weight index (HBI) were significantly reduced in mice after intragastric administration of 0.1 or 1 mg/kg BP-QDs for 28 days. In addition, obvious inflammatory cell infiltration and increased cardiomyocyte diameter were observed in the BP-QD-treated groups. Altered expression of proinflammatory cytokines and genes related to the NF-κB signaling pathway further confirmed that BP-QD exposure induced inflammatory responses. In addition, BP-QD treatment also affected the PI3K-AKT, PPARγ, thermogenesis, oxidative phosphorylation, and cardiac muscle contraction signaling pathways. The expression of genes related to glucose/lipid metabolism signaling pathways was dramatically affected by BP-QD exposure, and the effect was primarily mediated by the PPAR signaling pathway. Our study provides new insights into the toxicity of BP-QDs to human health.

Toxicity mechanism of engineered nanomaterials: Focus on mitochondria

With the rapid development of nanotechnology, engineered nanomaterials (ENMs) are widely used in various fields. This has exacerbated the environmental pollution and human exposure of ENMs. The study of toxicity of ENMs and its mechanism has become a hot research topic in recent years. Mitochondrial damage plays an important role in the toxicity of ENMs. This paper reviews the structural damage, dysfunction, and molecular level perturbations caused by different ENMs to mitochondria, including ZnO NPs, Ag NPs, TiO2 NPs, iron oxide NPs, cadmium-based quantum dots, CuO NPs, silica NPs, carbon-based nanomaterials. Among them, mitochondrial quality control plays an important role in mitochondrial damage. We further summarize the cellular level outcomes caused by mitochondrial damage, mainly including, apoptosis, ferroptosis, pyroptosis and inflammation response. In addition, we concluded that reducing mitochondrial damage at source as well as accelerating recovery from mitochondrial damage through ENMs modification and pharmacological intervention are two feasible strategies. This review further provides new insights into the mitochondrial toxicity mechanisms of ENMs and provides a new foothold for predicting human health and environmental risks of ENMs.

Concentration- and Time-Dependent Dietary Exposure to Graphene Oxide and Silver Nanoparticles: Effects on Food Consumption and Assimilation, Digestive Enzyme Activities, and Body Mass in Acheta domesticus

The advancement of nanotechnology poses a real risk of insect exposure to nanoparticles (NPs) that can enter the digestive system through contaminated food or nanopesticides. This study examines whether the exposure of model insect species-Acheta domesticus-to increasing graphene oxide (GO) and silver nanoparticle (AgNP) concentrations (2, 20, and 200 ppm and 4, 40, and 400 ppm, respectively) could change its digestive functions: enzymes' activities, food consumption, and assimilation. We noticed more pronounced alterations following exposure to AgNPs than to GO. They included increased activity of α-amylase, α-glucosidase, and lipase but inhibited protease activity. Prolonged exposure to higher concentrations of AgNPs resulted in a significantly decreased food consumption and changed assimilation compared with the control in adult crickets. A increase in body weight was observed in the insects from the Ag4 group and a decrease in body weight or no effects were observed in crickets from the Ag40 and Ag400 groups (i.e., 4, 40, or 400 ppm of AgNPs, respectively), suggesting that even a moderate disturbance in nutrient and energy availability may affect the body weight of an organism and its overall condition. This study underscores the intricate interplay between NPs and digestive enzymes, emphasizing the need for further investigation to comprehend the underlying mechanisms and consequences of these interactions.

Safety of Innovative Nanotechnology Oral Formulations Loaded with Bioactive Menopause Molecules: Influence of Genotoxicity and Biochemical Parameters on a Menopausal Rat Model

In recent years, nanoparticles have gained significant importance due to their unique properties, such as pharmacological, electrical, optical, and magnetic abilities, contributing to the growth of the science and technology sector. Particular naturally derived biomolecules with beneficial effects on menopause disorder have been the subject of studies of pharmaceutical formulation to obtain alternative pharmaceutical forms with increased bioavailability and without side effects, as in nanostructured lipid carriers (NLCs) loaded with such active ingredients. In the present study, one stage of a broader project, we have performed pharmacotoxicology studies for six combinatory innovative nanocapsule pharmaceutical forms containing active natural biomolecules before considering them as oral formulas for (1) in vitro toxicity studies on culture cells and (2) in vivo preclinical studies on a surgically induced menopause model of Wistar female rats, and the influence of the NLCs on key biochemical parameters: lipid profile (TG, Chol, HDL), glycemic markers (Gli), bone markers (Pac, Palc, Ca, phosphorus), renal markers (Crea, urea, URAC), inflammation (TNF), oxidative stress (GSH, MDA), and estrogen-progesterone hormonal profile. The micronucleus test did not reveal the genotoxicity of the tested compounds; the menopause model showed no significant safety concerns for the six tested formulas evaluated using the blood biochemical parameters; and the results showed the potential hypoglycemic, hypolipidemic, hypouricemic, and antioxidant potential of one of the tested formulas containing nano diosgenin and glycyrrhizic acid.

Multigenerational effects of TiO2 rutile nanoparticles on earthworms

Nanoparticles have gained considerable attention as one of the pollutants released into the environment through consumer products. This study describes the sub-chronic and generational effects of TiO2 (rutile) nanoparticles on earthworms over a 252-day duration, with exposure ranging from 0.1 to 1000 mg kg-1. Results indicate that sub-chronic exposure (28 days) of TiO2 nanoparticles did not cause notable adverse effects on the weight, reproduction, and tissue accumulation in parent earthworms. However, the F1 generation displayed remarkable growth and maturity retardation during their early developmental stages, even at lower nano-TiO2 (rutile). Significant impacts on the reproduction of the F1 generation were observed solely at the highest concentration (1000 mg kg-1), which is predicted to be below the highest exposure scenario. Moreover, long-term (252 days) exposure resulted in considerable bioaccumulation of Ti metal in the F1 generation of E. fetida. This study uncovers the negative effects of TiO2 rutile nanoparticles on earthworms across two generations, with pronounced effects on the growth, maturity, and bioaccumulation in the F1 generation compared to the parent generation. These findings suggest the potential induction of toxic effects by TiO2 rutile nanoparticles, emphasizing the sensitivity of juvenile parameters over adult parameters in toxicity assessments. Furthermore, the study highlights the urgent need for comprehensive evaluations of the longer-term toxicity of nanoparticles on terrestrial organisms. Implementing multigenerational studies will contribute significantly to a better understanding of nanoparticle ecotoxicity on environmental organisms.

Nicotine neurotoxicity exacerbation following engineered Ag and Cu (50-60 nm) nanoparticles intoxication. Neuroprotection with nanowired delivery of antioxidant compound H-290/51 together with serotonin 5-HT3 receptor antagonist ondansetron

Nicotine abuse is frequent worldwide leading to about 8 millions people die every year due to tobacco related diseases. Military personnel often use nicotine smoking that is about 12.8% higher than civilian populations. Nicotine smoking triggers oxidative stress and are linked to several neurodegenerative diseases such as Alzheimer's disease. Nicotine neurotoxicity induces significant depression and oxidative stress in the brain leading to neurovascular damages and brain pathology. Thus, details of nicotine neurotoxicity and factors influencing them require additional investigations. In this review, effects of engineered nanoparticles from metals Ag and Cu (50-60 nm) on nicotine neurotoxicity are discussed with regard to nicotine smoking. Military personnel often work in the environment where chances of nanoparticles exposure are quite common. In our earlier studies, we have shown that nanoparticles alone induces breakdown of the blood-brain barrier (BBB) and exacerbates brain pathology in animal models. In present investigation, nicotine exposure in with Ag or Cu nanoparticles intoxicated group exacerbated BBB breakdown, induce oxidative stress and aggravate brain pathology. Treatment with nanowired H-290/51 a potent chain-breaking antioxidant together with nanowired ondansetron, a potent 5-HT3 receptor antagonist significantly reduced oxidative stress, BBB breakdown and brain pathology in nicotine exposure associated with Ag or Cu nanoparticles intoxication. The functional significance of this findings and possible mechanisms of nicotine neurotoxicity are discussed based on current literature.

Bio-Inspired Nanomaterials for Micro/Nanodevices: A New Era in Biomedical Applications

Exploring bio-inspired nanomaterials (BINMs) and incorporating them into micro/nanodevices represent a significant development in biomedical applications. Nanomaterials, engineered to imitate biological structures and processes, exhibit distinctive attributes such as exceptional biocompatibility, multifunctionality, and unparalleled versatility. The utilization of BINMs demonstrates significant potential in diverse domains of biomedical micro/nanodevices, encompassing biosensors, targeted drug delivery systems, and advanced tissue engineering constructs. This article thoroughly examines the development and distinctive attributes of various BINMs, including those originating from proteins, DNA, and biomimetic polymers. Significant attention is directed toward incorporating these entities into micro/nanodevices and the subsequent biomedical ramifications that arise. This review explores biomimicry's structure-function correlations. Synthesis mosaics include bioprocesses, biomolecules, and natural structures. These nanomaterials' interfaces use biomimetic functionalization and geometric adaptations, transforming drug delivery, nanobiosensing, bio-inspired organ-on-chip systems, cancer-on-chip models, wound healing dressing mats, and antimicrobial surfaces. It provides an in-depth analysis of the existing challenges and proposes prospective strategies to improve the efficiency, performance, and reliability of these devices. Furthermore, this study offers a forward-thinking viewpoint highlighting potential avenues for future exploration and advancement. The objective is to effectively utilize and maximize the application of BINMs in the progression of biomedical micro/nanodevices, thereby propelling this rapidly developing field toward its promising future.

Polysaccharide-Based Edible Films/Coatings for the Preservation of Meat and Fish Products: Emphasis on Incorporation of Lipid-Based Nanosystems Loaded with Bioactive Compounds

The high water and nutritional contents of meat and fish products make them susceptible to spoilage. Thus, one of the most important challenges faced by the meat industry is extending the shelf life of meat and fish products. In recent years, increasing concerns associated with synthetic compounds on health have limited their application in food formulations. Thus, there is a great need for natural bioactive compounds. Direct use of these compounds in the food industry has faced different obstacles due to their hydrophobic nature, high volatility, and sensitivity to processing and environmental conditions. Nanotechnology is a promising method for overcoming these challenges. Thus, this article aims to review the recent knowledge about the effect of biopolymer-based edible films or coatings on the shelf life of meat and fish products. This study begins by discussing the effect of biopolymer (pectin, alginate, and chitosan) based edible films or coatings on the oxidation stability and microbial growth of meat products. This is followed by an overview of the nano-encapsulation systems (nano-emulsions and nanoliposomes) and the effect of edible films or coatings incorporated with nanosystems on the shelf life of meat and fish products.

Interactions between titanium dioxide nanoparticles and polyethylene microplastics: Adsorption kinetics, photocatalytic properties, and ecotoxicity

The present study investigated the adsorption mechanism of titanium dioxide nanoparticles (nTiO₂) on polyethylene microplastics (MPs) and the resulting photocatalytic properties. This effort was supported by ecotoxicological assessments of MPs with adsorbed nTiO₂ on the immobility and behaviour of Daphnia magna in presence and absence of UV irradiation. The results showed that nTiO₂ were rapidly adsorbed on the surface of MPs (72% of nTiO₂ in 9 h). The experimental data fit well with the pseudo-second order kinetic model. Both suspended nTiO₂ and nTiO₂ immobilized on MPs exhibited comparable photocatalytic properties, with the latter showing a lower effect on Daphnia mobility. A likely explanation is that the suspended nTiO₂ acted as a homogeneous catalyst under UV irradiation and generated hydroxyl radicals throughout the test vessel, whereas the nTiO₂ adsorbed on MPs acted as a heterogeneous catalyst and generated hydroxyl radicals only locally and thus near the air-water interface. Consequently, Daphnia, which were hiding at the bottom of the test vessel, actively avoided exposure to hydroxyl radicals. These results suggest that the presence of MPs can modulate the phototoxicity of nTiO₂ - at least the location at which it is active - under the studied conditions.

Membrane processes for environmental remediation of nanomaterials: Potentials and challenges

Nanomaterials have gained huge attention with their wide range of applications. This is mainly driven by their unique properties. Nanomaterials include nanoparticles, nanotubes, nanofibers, and many other nanoscale structures have been widely assessed for improving the performance in different applications. However, with the wide implementation and utilization of nanomaterials, another challenge is being present when these materials end up in the environment, i.e. air, water, and soil. Environmental remediation of nanomaterials has recently gained attention and is concerned with removing nanomaterials from the environment. Membrane filtration processes have been widely considered a very efficient tool for the environmental remediation of different pollutants. Membranes with their different operating principles from size exclusions as in microfiltration, to ionic exclusion as in reverse osmosis, provide an effective tool for the removal of different types of nanomaterials. This work comprehends, summarizes, and critically discusses the different approaches for the environmental remediation of engineered nanomaterials using membrane filtration processes. Microfiltration (MF), ultrafiltration (UF), and nanofiltration (NF) have been shown to effectively remove nanomaterials from the air and aqueous environments. In MF, the adsorption of nanomaterials to membrane material was found to be the main removal mechanism. While in UF and NF, the main mechanism was size exclusion. Membrane fouling, hence requiring proper cleaning or replacement was found to be the major challenge for UF and NF processes. While limited adsorption capacity of nanomaterial along with desorption was found to be the main challenges for MF.

Effect of natural soil nanocolloids on the fate and toxicity of cadmium to rice (Oryza sativa L.) roots

Toxic heavy metals are common contaminants and will most likely interact with ubiquitous natural nanocolloids (Ncs) in the soil environment. However, the effect of soil Ncs on the fate and health risk of cadmium (Cd) have not been well addressed. Here, the interaction between Ncs and Cd is investigated using two-dimensional correlation spectroscopy (2DCOS) combined with synchronous fluorescence and Fourier transform infrared spectroscopy. Our results reveal that Cd binding to the soil Ncs surface is mainly driven through strong hydrophilic effects and π - π interactions, which contribute to a high adsorption capacity (366-612 mg/g) and strong affinity (K_L = 4.3-9.7 L/mg) of Cd to soil Ncs. Interestingly, soil Ncs and Cd coexposure can significantly mediate the phytotoxicity (e.g., uptake, root growth, and oxidative stress) of Cd to rice (Oryza sativa L.) roots after 7 days of exposure. At the molecular level, metabolomic analysis reveals that the downregulated metabolic pathways (e.g., isoquinoline alkaloid and aminoacyl-tRNA biosynthesis, glycine, serine and threonine metabolism) may contribute to the above adverse phytotoxicity. This study provides new insight into the effect of natural Ncs on the fate and health risks of toxic heavy metals in soil environments.

Nanoparticulate pollutants in the environment: Analytical methods, formation, and transformation

The wide application of nanomaterials and plastic products generates a substantial number of nanoparticulate pollutants in the environment. Nanoparticulate pollutants are quite different from their bulk counterparts because of their unique physicochemical properties, which may pose a threat to environmental organisms and human beings. To accurately predict the environmental risks of nanoparticulate pollutants, great efforts have been devoted to developing reliable methods to define their occurrence and track their fate and transformation in the environment. Herein, we summarized representative studies on the preconcentration, separation, formation, and transformation of nanoparticulate pollutants in environmental samples. Finally, some perspectives on future research directions are proposed.

Microplastics as carriers of iron and copper nanoparticles in aqueous solution

In recent years, microplastics have attracted a lot of attention due to their excessive spread in the environment, especially in aquatic ecosystems. By sorbing metal nanoparticles on their surface, microplastics can act as carriers of these pollutants in aquatic environments and thus cause adverse effects on the health of living organisms and humans. This study, investigated the adsorption of iron and copper nanoparticles on three different microplastics i.e. polypropylene (PP), polyvinyl chloride (PVC) and polystyrene (PS). In this regard, the effects of parameters such as; pH, duration of contact and initial concentration of nanoparticle solution were investigated. By using atomic absorption spectroscopic analysis, the amount of adsorption of metal nanoparticles by microplastics was measured. The maximum amount of adsorption occurred at pH = 11, after a duration time of 60 min and at the initial concentration of 50 mg L^-1. Scanning electron microscope (SEM) images showed that microplastics have different surface characteristics. The spectra obtained from Fourier transform infrared analysis (FTIR) before and after the adsorption of iron and copper nanoparticles on microplastics were not different, which showed that the adsorption of iron and copper nanoparticles on microplastics was physically and no new functional group was formed. X-ray energy diffraction spectroscopy (EDS) showed the adsorption of iron and copper nanoparticles on microplastics. By examining Langmuir and Freundlich adsorption isotherms and adsorption kinetics, it was found that the adsorption of iron and copper nanoparticles on microplastics is more consistent with the Freundlich adsorption isotherm. Also, pseudo-second-order kinetics is more suitable than pseudo-first-order kinetics. The adsorption ability of microplastics was as follows: PVC > PP > PS, and in general copper nanoparticles were adsorbed more than iron nanoparticles on microplastics.

The significance of metallic nanoparticles in the emerging, development and spread of antibiotic resistance

An ever-increasing number of newly synthesised nanoparticles have a constantly expanding range of applications. The large-scale implementation of nanoparticles will inevitably lead to intentional or accidental contamination of various environments. Since the major benefit of using several metallic nanoparticles is antimicrobial activity, these emerging contaminants may have a potentially hazardous impact on the development and spread of antibiotic resistance - a challenge that threats infection therapy worldwide. Few studies underline that metallic nanoparticles may affect the emergence and evolution of resistance via mutations and horizontal transfer between different bacterial species. Due to the complexity of factors and mechanisms involved in disseminating antibiotic resistance, it is crucial to investigate if metallic nanoparticles play a significant role in this process through co-selection ability and pressure exerted on bacteria. The aim of this review is to summarise the current research on mutations and three main horizontal gene transfer modes facilitated by nanoparticles. Here, the current results in the field are presented, major knowledge gaps and the necessity for more environmentally relevant studies are discussed.

Organic Nanodelivery Systems as a New Platform in the Management of Breast Cancer: A Comprehensive Review from Preclinical to Clinical Studies

Breast cancer accounts for approximately 25% of cancer cases and 16.5% of cancer deaths in women, and the World Health Organization predicts that the number of new cases will increase by almost 70% over the next two decades, mainly due to an ageing population. Effective diagnostic and treatment strategies are, therefore, urgently required for improving cure rates among patients since current therapeutic modalities have many limitations and side effects. Nanomedicine is evolving as a promising approach for cancer management, including breast cancer, and various types of organic and inorganic nanomaterials have been investigated for their role in breast cancer diagnosis and treatment. Following an overview on breast cancer characteristics and pathogenesis and challenges of the current treatment strategies, the therapeutic potential of biocompatible organic-based nanoparticles such as liposomes and polymeric micelles that have been tested in breast cancer models are reviewed. The efficacies of different drug delivery and targeting strategies are documented, ranging from synthetic to cell-derived nanoformulations together with a summary of the interaction of nanoparticles with externally applied energy such as radiotherapy. The clinical translation of nanoformulations for breast cancer treatment is summarized including those undergoing clinical trials.

The Potential of ICP-MS as a Complementary Tool in Nanoparticle-Protein Corona Analysis

The prolific applicability of nanomaterials has made them a common citizen in biological systems, where they interact with proteins forming a biological corona complex. These complexes drive the interaction of nanomaterials with and within the cells, bringing forward numerous potential applications in nanobiomedicine, but also arising toxicological issues and concerns. Proper characterization of the protein corona complex is a great challenge typically handled with the combination of several techniques. Surprisingly, despite inductively coupled plasma mass spectrometry (ICP-MS) being a powerful quantitative technique whose application in nanomaterials characterization and quantification has been consolidated in the last decade, its application to nanoparticle-protein corona studies is scarce. Furthermore, in the last decades, ICP-MS has experienced a turning point in its capabilities for protein quantification through sulfur detection, hence becoming a generic quantitative detector. In this regard, we would like to introduce the potential of ICP-MS in the nanoparticle protein corona complex characterization and quantification complementary to current methods and protocols.

Toxicokinetics of silver and silver sulfide nanoparticles in Chironomus riparius under different exposure routes

Engineered nanoparticles released into surface water may accumulate in sediments, potentially threatening benthic organisms. This study determined the toxicokinetics in Chironomus riparius of Ag from pristine silver nanoparticles (Ag NPs), a simulating aged Ag NP form (Ag₂S NPs), and AgNO₃ as an ionic control. Chironomid larvae were exposed to these Ag forms through water, sediment, or food. The potential transfer of Ag from larvae to adult midges was also evaluated. Results revealed higher Ag uptake by C. riparius upon exposure to Ag₂S NPs, while larvae exposed to pristine Ag NPs and AgNO₃ generally presented similar uptake kinetics. Uptake patterns of the different Ag forms were generally similar in the tests with water or sediment exposures, suggesting that uptake from water was the most important route of Ag uptake in both experiments. For the sediment bioaccumulation test, uptake was likely a combination of water uptake and sediment particles ingestion. Ag uptake via food exposure was only significant for Ag₂S NPs. Ag transfer to the terrestrial compartment was low. In our environmentally relevant exposure scenario, chironomid larvae accumulated relatively high Ag concentrations and elimination was extremely low in some cases. These results suggest that bioaccumulation of Ag in its nanoparticulate and/or ionic form may occur in the environment, raising concerns regarding chronic exposure and trophic transfer. This is the first study determining the toxicokinetics of NPs in Chironomus, providing important information for understanding chironomid exposure to NPs and their potential interactions in the environment.

Life Cycle Assessment of Functionalized Bionanocompounds with Ice Nucleation Protein for Freezing Applications

The objective of this study was to assess the effectiveness of functionalized bionanocompounds with ice nucleation protein (INP) as a novel approach for freezing applications in terms of how much energy is used during each step of freezing when water bionanocompound solutions were compared with pure water. According to the results of the manufacturing analysis, water required 28 times less energy than the silica + INA bionanocompound and 14 times less than the magnetite + INA bionanocompound. These findings showed that water used the least energy during the manufacturing process. In order to determine the associated environmental implications, an analysis of the operating stage was also conducted, taking the defrosting time of each bionanocompound during a 4 h work cycle into account. Our results showed that bionanocompounds may substantially reduce the environmental effects by achieving a 91% reduction in the impact after their use during all four work cycles in the operation stage. Additionally, given the energy and raw materials needed in this process, this improvement was more significant than at the manufacturing stage. The results from both stages indicated that, when compared with water, the magnetite + INA bionanocompound and the silica + INA bionanocompound would save an estimated 7% and 47% of total energy, respectively. The study’s findings also demonstrated the great potential for using bionanocompounds in freezing applications to reduce the effects on the environment and human health.

Assessing the in vitro toxicity of airborne (nano)particles to the human respiratory system: from basic to advanced models

Several studies have been conducted to address the potential adverse health risks attributed to exposure to nanoscale materials. While in vivo studies are fundamental for identifying the relationship between dose and occurrence of adverse effects, in vitro model systems provide important information regarding the mechanism(s) of action at the molecular level. With a special focus on exposure to inhaled (nano)particulate material toxicity assessment, this review provides an overview of the available human respiratory models and exposure systems for in vitro testing, advantages, limitations, and existing investigations using models of different complexity. A brief overview of the human respiratory system, pathway and fate of inhaled (nano)particles is also presented.

Laboratory activities involving nanomaterials: risk assessment and investigating researchers symptoms

The increasing use of nanomaterials is a threat to human health and environment that has led to the expansion of risk assessment methods. Thus, the aim of this study was to assess the occupational risks of activities involving nanomaterials in nanomedicine research laboratories by Control Banding (CB) NanoTool and Guidance methods. Further, the symptoms of researchers working in these laboratories were investigated. This cross-sectional study was managed in nanomedicine research laboratories. Risk assessment was performed by the CB NanoTool and Guidance methods. Moreover, a questionnaire was used to assess the prevalence of non-specific symptoms. Finally, data were analyzed using the IBM SPSS software. Descriptive statistics were used for data analysis. Many activities are located on the risk level RL2 and category A based on the CB NanoTool and Guidance methods, respectively. Further, the highest severity of exposure to nanomaterials belonged to the preparation of suspension and emulsion and manufacture of metal nanopolymers, but the highest probability of exposure was in the manufacturing of carbon nanocomposites. In addition, there was a significant relationship between the level of risk in the two methods (P = 0.003). Although, cutaneous symptoms were the most common symptoms among laboratory researchers, chi-square test did not confirm any significant relationship between symptoms and risk levels (p-value >0.05) in these two methods. Since the NanoTool method uses more diverse parameters for risk assessment and is more acceptable, choosing control measures based on its results seems more reasonable. Moreover, Guidance can be used as a method for initial assessments and determine the need for further assessments.

Enhancing the photoinduced via a novel nano-combination of terbium oxide and nickel oxide on graphene oxide surface: Cytotoxicity and water treatment

The target is a novel nano-combination membrane (NCM) via Terbium oxide nanoparticles (Tb₂O₃ NPs) and nickel oxide (NiO NPs) which integrates on the graphene oxide (GO) surface. The NCM is characterized by different tools such as X-ray diffraction (XRD), UV-visible spectrophotometer (UV-vis), and Scanning electron microscopy (SEM)for removing organic pollutants. The precipitation method has been applied for fabricating the selected metal oxides (MOs), where the terbium chloride and nickel chloride are used as precursors for fabricating the metal oxides (MOs) NPs that formed with potassium hydroxide in the solution. The photocatalytic activity of fabricated NCM has been noticed with the quenching of mixed Rhodamine B (RhB) and methyl orange (MO) dyes at various times for water treatment. UV-vis spectra confirmed the excellent efficiency against organic pollution degradation. After exposure to the light for 100 min, the photodegradation efficacy of MB and RhB appeared at 46.88 % and 16.4 %, with GO@Tb2O3, by GO@Tb2O3.NiO the efficiency was 54.8 % and 32.3 % after 100 min, while GO@NiO has degradation efficiency at 43 % and 17.3 % for MB and RhB respectively. The cytotoxicity of NCM is detected with hepatocellular carcinoma (HepG2) and breast adenocarcinoma (MCF-7), the result illustrated that the fabricated NCM does not affect the cancer cells with the 10 µL, but with the higher concentration of 100 µL, the cell lysis was observed. The results of photocatalytic and cytotoxicity are recommended using these fabricated NCM in water treatment.

Recent innovation and impacts of nano-based technologies for wastewater treatment on humans: a review

Sustainable wastewater management requires environment-friendly, efficient, and cost-effective methods of water treatment. The ever-growing list of emerging contaminants in municipal wastewater requires advanced, efficient, and cost-effective techniques for its treatment to combat the increasing water demand. The nano-based technologies hold great potential in improving water treatment efficiency and augmenting the water supply. However, the environmental effects of these technologies are still questionable among the public and scientific community. The present review discusses risks to human health due to the use of nano-based technology for the removal of emerging contaminants in water. The discussion will be about the impacts of these technologies on humans. Recommendations about safe and environmentally friendly options for nano-based technology for water treatment have been included. Safest options of nano-based technologies for water treatment and steps to minimize the risk associated with them have also been incorporated in this article. Since all biological systems are different, separate risk analyses should be performed at the environmentally relevant concentration for different durations. There is little/no information on the quantitative impact on humans and requires more understanding. The quantitative measurement of the cellular uptake of nanoparticles is usually difficult. We hope this article will serve its purpose for water researchers, medical researchers, environmentalists, policymakers, and the government.

Theoretical basis and experimental verification for evaluating the distribution of engineered nanoparticles in water-oil system

The distribution of nanoparticles between aqueous and organic phases is universally considered as the starting point in predicting the fate and bioavailability of engineered nanoparticles in the environment. However, the theoretical basis for determining the distribution of nanoparticles in the immiscible water-oil system remains unclear. Here, for the first time, theoretical calculations were conducted to illustrate the underlying mechanism. It was suggested that the distribution of nanoparticles was largely controlled by the surface charge, particle size and surface hydrophobicity, and the water-oil interface was not the favorable phase for nanoparticles until a size threshold (10 nm) was met and the particle surface became amphiphilic. The theoretical results were verified by the experimental approaches of different nanoparticles distributed in the water-octanol mixture. The neutralization of a charged surface led to enhanced distribution into octanol for hydrophobic nanoparticles (e.g., aqueous C₆₀), yet it had little effect on hydrophilic nanoparticles (e.g., fullerol). More nanoparticles were trapped at the water-oil interface when size grew larger (e.g., Ag-CIT and Au-CIT with citrate) and the surface rendered amphiphilic by polymeric coatings (e.g., Ag-PVP with polyvinylpyrrolidone), though larger hydrophobic nanoparticles like aqu-nC₆₀ tended to stay in the octanol. The surface charge and hydrophobicity may have an important impact on the path-dependent distribution of nanoparticles in water- octanol system. The mechanistic insights based on theoretical calculations and experimental approaches will facilitate the accurate prediction of the distribution of engineered nanoparticles in biological and environmental systems.

Secured Nanosynthesis-Deposition Aerosol Process for Composite Thin Films Incorporating Highly Dispersed Nanoparticles

Application of nanocomposites in daily life requires not only small nanoparticles (NPs) well dispersed in a matrix, but also a manufacturing process that is mindful of the operator and the environment. Avoiding any exposure to NPs is one such way, and direct liquid reaction-injection (DLRI) aims to fulfill this need. DLRI is based on the controlled in situ synthesis of NPs from the decomposition of suitable organometallic precursors in conditions that are compatible with a pulsed injection mode of an aerosol into a downstream process. Coupled with low-pressure plasma, DLRI produces nanocomposite with homogeneously well-dispersed small nanoparticles that in the particular case of ZnO-DLC nanocomposite exhibit unique properties. DLRI favorably compares with the direct liquid injection of ex situ formed NPs. The exothermic hydrolysis reaction of the organometallic precursor at the droplet-gas interface leads to the injection of small and highly dispersed NPs and, consequently, the deposition of fine and controlled distribution in the nanocomposite. The scope of DLRI nanosynthesis has been extended to several metal oxides such as zinc, tin, tungsten, and copper to generalize the concept. Hence, DLRI is an attractive method to synthesize, inject, and deposit nanoparticles and meets the prevention and atom economy requirements of green chemistry.

Daphnia as a model organism to probe biological responses to nanomaterials-from individual to population effects via adverse outcome pathways

The importance of the cladoceran Daphnia as a model organism for ecotoxicity testing has been well-established since the 1980s. Daphnia have been increasingly used in standardised testing of chemicals as they are well characterised and show sensitivity to pollutants, making them an essential indicator species for environmental stress. The mapping of the genomes of D. pulex in 2012 and D. magna in 2017 further consolidated their utility for ecotoxicity testing, including demonstrating the responsiveness of the Daphnia genome to environmental stressors. The short lifecycle and parthenogenetic reproduction make Daphnia useful for assessment of developmental toxicity and adaption to stress. The emergence of nanomaterials (NMs) and their safety assessment has introduced some challenges to the use of standard toxicity tests which were developed for soluble chemicals. NMs have enormous reactive surface areas resulting in dynamic interactions with dissolved organic carbon, proteins and other biomolecules in their surroundings leading to a myriad of physical, chemical, biological, and macromolecular transformations of the NMs and thus changes in their bioavailability to, and impacts on, daphnids. However, NM safety assessments are also driving innovations in our approaches to toxicity testing, for both chemicals and other emerging contaminants such as microplastics (MPs). These advances include establishing more realistic environmental exposures via medium composition tuning including pre-conditioning by the organisms to provide relevant biomolecules as background, development of microfluidics approaches to mimic environmental flow conditions typical in streams, utilisation of field daphnids cultured in the lab to assess adaption and impacts of pre-exposure to pollution gradients, and of course development of mechanistic insights to connect the first encounter with NMs or MPs to an adverse outcome, via the key events in an adverse outcome pathway. Insights into these developments are presented below to inspire further advances and utilisation of these important organisms as part of an overall environmental risk assessment of NMs and MPs impacts, including in mixture exposure scenarios.

Phytoremediation of CdS/Te quantum dots by Ocimum basilicum in the presence of EDTA

Purpose

The use of nanomaterials like quantum dots (QDs) with optical properties has increased in the last decade because of their electronics, medicine, and environmental applications. The lack of recycling and appropriate disposal causes these materials to be considered new emerging contaminants. In this research, the extraction and translocation (phytoextraction) of cadmium as QDs by Ocimum basilicum "basil" in the presence of EDTA (chelating agent) was studied. For edible plants are essential to know where the contaminants are located to minimize human consumption.

Methods

In this work, the phytoextraction, distribution, and translocation of cadmium (under ionic solution-CdIS and CdS/Te QDs) at 25 and 50 mg/kg-soil and in the presence of 1,000 mg/kg-soil EDTA was studied in O. basilicum (a commercialized culinary herb) for three and six weeks. Basil seedlings were grown in an environmentally controlled chamber at 24-28o C and 12/12 hours periods of light and darkness.

Results

The highest cadmium concentration was found in the roots from where it is translocated to stems and leaves. CdS/Te QDs at low concentration (25 mg/kg and 3 weeks of exposure) had the highest translocation factor, indicating that cadmium's nanocrystal (QDs) forms can affect the phytoextraction mechanism. The highest bioconcentration of cadmium was reached at a high contaminant concentration.

Conclusion

The bioconcentration factors confirm that O. basilicum phytoextracts cadmium from soils contaminated with CdS/Te QDs and CdIS. The bioconcentration factors of cadmium (under both species CdS/Te QDs and CdIS) increase in the presence of EDTA. The bioconcentration and translocation factors suggest that consuming "basil" from contaminated soils with CdS/Te QDs at low concentrations increases the exposition to this metal.

Potential Environmental and Health Implications from the Scaled-Up Production and Disposal of Nanomaterials Used in Biosensors

Biosensors often combine biological recognition elements with nanomaterials of varying compositions and dimensions to facilitate or enhance the operating mechanism of the device. While incorporating nanomaterials is beneficial to developing high-performance biosensors, at the stages of scale-up and disposal, it may lead to the unmanaged release of toxic nanomaterials. Here we attempt to foster connections between the domains of biosensors development and human and environmental toxicology to encourage a holistic approach to the development and scale-up of biosensors. We begin by exploring the toxicity of nanomaterials commonly used in biosensor design. From our analysis, we introduce five factors with a role in nanotoxicity that should be considered at the biosensor development stages to better manage toxicity. Finally, we contextualize the discussion by presenting the relevant stages and routes of exposure in the biosensor life cycle. Our review found little consensus on how the factors presented govern nanomaterial toxicity, especially in composite and alloyed nanomaterials. To bridge the current gap in understanding and mitigate the risks of uncontrolled nanomaterial release, we advocate for greater collaboration through a precautionary One Health approach to future development and a movement towards a circular approach to biosensor use and disposal.

Diverse Pathways of Engineered Nanoparticle-Induced NLRP3 Inflammasome Activation

With the rapid development of engineered nanomaterials (ENMs) in biomedical applications, their biocompatibility and cytotoxicity need to be evaluated properly. Recently, it has been demonstrated that inflammasome activation may be a vital contributing factor for the development of biological responses induced by ENMs. Among the inflammasome family, NLRP3 inflammasome has received the most attention because it directly interacts with ENMs to cause the inflammatory effects. However, the pathways that link ENMs to NLRP3 inflammasome have not been thoroughly summarized. Thus, we reviewed recent findings on the role of major ENMs properties in modulating NLRP3 inflammasome activation, both in vitro and in vivo, to provide a better understanding of the underlying mechanisms. In addition, the interactions between ENMs and NLRP3 inflammasome activation are summarized, which may advance our understanding of safer designs of nanomaterials and ENM-induced adverse health effects.

Silver nanoparticles suppress forskolin-induced syncytialization in BeWo cells

Opportunities for the exposure of pregnant women to engineered nanoparticles have been increasing with the expanding use of these materials. Therefore, there are concerns that nanoparticles could have adverse effects on the establishment and maintenance of pregnancy. The effects of nanoparticles on the mother and fetus have been evaluated from this perspective, but there is still little knowledge about the effects on placentation and function acquisition, which are essential for the successful establishment and maintenance of pregnancy. Formation of the syncytiotrophoblast is indispensable for the acquisition of placental function, and impairment of syncytialization inevitably affects pregnancy outcomes. Here, we assessed the effect of nanoparticles on placental formation by using forskolin-treated BeWo cells, a typical in vitro model of trophoblast syncytialization. Immunofluorescence staining analysis revealed that silver nanoparticles with a diameter of 10 nm (nAg10) (at 0.156 µg/mL) significantly decreased the proportion of syncytialized BeWo cells, but gold nanoparticles with a diameter of 10 nm did not. Consistently, only nAg10 (at 0.156 µg/mL) significantly suppressed forskolin-induced elevation of CGB and SDC1 mRNA expression levels and human chorionic gonadotropin β production in a dose-dependent manner; these molecules are all markers of syncytialization. Besides, nAg10 significantly decreased the expression of ERVFRD-1, which encodes proteins associated with cell fusion. Moreover, nAg10 tended to suppress the expression of sFlt-1 e15a, a placental angiogenesis marker. Collectively, our data suggest that nAg10 could suppress formation of the syncytiotrophoblast and that induce placental dysfunction and the following poor pregnancy outcomes.

Impacts of engineered iron nanoparticles on oxidative stress, fatty acid composition, and histo-architecture of the smooth scallop Flexopecten glaber

Engineered iron nanoparticles are widely used in environmental remediation, yet their potential toxic effects on marine biota remain poorly elucidated. This study aimed to gain insight into the nanoscale zero-valent iron (NZVI) toxicity mechanisms for marine invertebrates. Aside from the effect on oxidative status and histopathology, the effect of NZVI on lipid metabolism in bivalves was studied for the first time. To this end, specimens of Flexopecten glaber were exposed to ascending concentrations (0.5, 1, and 1.5 mg/L) of NZVI for 96 h. Results illustrate differential patterns of iron accumulation in the gills and the digestive gland. By increasing NZVI concentrations, the total iron level tended to markedly increase in the gills and decrease in the digestive gland, reaching 132 and 37.6 μg/g DW, respectively, in the specimens exposed to 1.5 mg/L. Biochemical and cellular biomarkers highlighted that NZVI caused oxidative stress (measured as hydrogen peroxide, malondialdehyde, and advanced oxidation protein product levels) and alterations of antioxidant defense systems, including reduced glutathione, non-protein thiol, glutathione peroxidase, superoxide dismutase, and catalase. Modulation of lipid metabolism with changed fatty acid compositions (mainly an increase in the saturation and a decrease in unsaturation levels) was also observed in both gills and digestive gland. Moreover, several histological damages, including lipofuscin accumulation, infiltrative inflammations, and digestive tubule alterations, were observed in the two studied organs, providing supplementary evidence regarding the toxic effect of NZVI. This study adds to the growing body of evidence pointing to the hazardous impacts of iron NPs on aquatic ecosystems.

Effects of Nano-Graphene Oxide on the Growth and Reproductive Dynamics of Spodoptera frugiperda Based on an Age-Stage, Two-Sex Life Table

The development and reproduction of the fall armyworm (FAW), Spodoptera frugiperda, which were reared on artificial diets containing nano-graphene oxide (GO), were determined based on age-stage, two-sex life table analysis. The results showed that GO had adverse effects on FAWs. Compared with the control, the duration of the egg stage and first, second, and sixth instar larval stages increased with increasing GO concentrations; however, the lifespan of male and female adults decreased with increasing GO concentrations. Weights of FAW pupae that were supplied with GO-amended diets increased by 0.17-15.20% compared to the control. Intrinsic growth, limited growth, and net reproductive rates of FAWs feeding on GO supplemented diets were significantly lower than the control, while mean generational periods (0.5 mg/g: 38.47; 1 mg/g: 40.38; 2 mg/g: 38.42) were significantly longer than the control. The expression of genes encoding vitellogenin (Vg) and vitellogenin receptor (VgR) expression was abnormal in female FAW adults feeding on GO-amended diets; the number of eggs laid decreased relative to the control, but Vg expression increased. In conclusion, GO prolonged the developmental period of FAWs, decreased fecundity, and led to a decline in the population size. The study provides a basis for the rational use of GO as a pesticide synergist for FAW control.

Protective activities of ellagic acid and urolithins against kidney toxicity of environmental pollutants: A review

Oxidative stress and inflammation are two possible mechanisms related to nephrotoxicity caused by environmental pollutants. Ellagic acid, a powerful antioxidant phytochemical, may have great relevance in mitigating pollutant-induced nephrotoxicity and preventing the progression of kidney disease. This review discusses the latest findings on the protective effects of ellagic acid, its metabolic derivatives, the urolithins, against kidney toxicity caused by heavy metals, pesticides, mycotoxins, and organic air pollutants. We describe the chelating, antioxidant, anti-inflammatory, antifibrotic, antiautophagic, and antiapoptotic properties of ellagic acid to attenuate nephrotoxicity. Furthermore, we present the molecular targets and signaling pathways that are regulated by these antioxidants, and suggest some others that should be explored. Nevertheless, the number of reports is still limited to establish the efficacy of ellagic acid against kidney damage induced by environmental pollutants. Therefore, additional preclinical studies on this topic are required, as well as the development of well-designed clinical trials.

Nanotechnology for research and treatment of the intestine

The establishment of intestinal in vitro models is crucial for elucidating intestinal cell-microbe intrinsic connections and interaction mechanisms to advance normalized intestinal diagnosis and precision therapy. This review discusses the application of nanomaterials in mucosal therapy and mechanism research in combination with the study of nanoscaffold in vitro models of the gut. By reviewing the original properties of nanomaterials synthesized by different physicochemical principles and modifying the original properties, the contribution of nanomaterials to solving the problems of short survival period, low cell differentiation rate, and poor reduction ability in traditional intestinal models is explored. According to nanomaterials’ different diagnostic mediators and therapeutic targets, the current diagnostic principles in inflammatory bowel disease, intestinal cancer, and other diseases are summarized inductively. In addition, the mechanism of action of nanomedicines in repairing mucosa, inhibiting inflammation, and alleviating the disease process is also discussed. Through such systematic elaboration, it offers a basis for nanomaterials to help advance in vitro research on the intestine and provide precision treatments in the clinic.

Vast emission of Fe- and Ti-containing nanoparticles from representative coal-fired power plants in China and environmental implications

Coal combustion is considered an important source of atmospheric nanoparticles (NPs). However, the underlying information on the emission of NPs from coal-fired power plants (CFPPs) is still lacking. Along these lines, in this study, coal fly ashes (CFAs) were collected from different multi-stage particulate emission control devices (PECDs) in three representative CFPPs in China. The particle size and particle number concentration (PNC) of typical metal-containing NPs (Fe- and Ti-containing NPs) were analyzed by using the single-particle inductively coupled plasma mass (SP-ICP-MS) technology. By increasing the stage of PECDs, the mean particle sizes of NPs gradually declined and the PNCs of Fe- and Ti-containing NPs increased significantly. Specifically, the PNC of final-stage CFA was 3 - 8 times that of the first-stage CFA. A comparison of the electrostatic precipitators (ESPs), fabric filters (FFs), and electrostatic-fabric-integrated precipitators (EFIPs) showed that the state-of-the-art EFIPs exhibited a relatively good NP-removal efficiency with the highest PNCs. In addition, NP hourly emissions in all coal combustion by-products (CCPs) were further calculated in a typical CFPP. The total emissions of Fe- and Ti-containing NPs in all CCPs were 1.87 × 10¹⁸ and 1.57 × 10¹⁸ particles/h, respectively. NPs were mainly enriched in CFA trapped by PECDs (80% of total emissions). Although the mass of the CFA that escaped through the stack was extremely low, it contained the highest PNCs of Fe- and Ti-containing NPs of all CCPs, accounting for 3.41% and 1.67% of the corresponding total NP emissions. These NPs may also coexist with various toxic metals, such as Zn and Pb, and be released directly into the atmosphere, where they pose a potential risk to human health.

Roadmap of environmental health research on emerging contaminants: Inspiration from the studies on engineered nanomaterials

Research on the environmental health of emerging contaminants is critical to understand their risks before causing severe harm. However, the low environmental concentrations, complex behaviors, and toxicology of emerging contaminants present enormous challenges for researchers. Here, we reviewed the research on the environmental health of engineered nanomaterials (ENMs), one of the typical emerging contaminants, to enlighten pathways for future research on emerging contaminants at their initial exploratory stage. To date, some developed pretreatment methods and detection technologies have been established for the determination of ENMs in natural environments. The mechanisms underlying the transfer and transformation of ENMs have been systematically explored in laboratory studies. The mechanisms of ENMs-induced toxicity have also been preliminarily clarified at genetic, cellular, individual, and short food chain levels, providing not only a theoretical basis for revealing the risk change and environmental health effects of ENMs in natural environments but also a methodological guidance for studying environmental health of other emerging contaminants. Nonetheless, due to the interaction of multiple environmental factors and the high diversity of organisms in natural environments, health effects observed in laboratory studies likely differ from those in natural environments. We propose a holistic approach and mesocosmic model ecosystems to systematically carry out environmental health research on emerging contaminants, obtaining data that determine the objectivity and accuracy of risk assessment.

Floating microplastics pollution in the Central Atlantic Ocean of Morocco: Insights into the occurrence, characterization, and fate

This work presents preliminary results about abundance, distribution, characteristics, sources, and fate of microplastics (MPs) in the Central Atlantic Ocean (CAO) of Morocco. The investigation was conducted into three subsections, each characterized by different types of human activities and covering rural, village, and urban areas. MPs were detected in 100 % of the sampling sites. The abundances varied from 0.048 to 3.305 items/m³, with a mean abundance of 0.987 ± 1.081 items/m³. MPs abundance was higher in surface seawater linked to urban areas compared to village and rural areas. The dominant polymer type was polyester (PET-53.8 %) followed by polypropylene (PP-24.36 %), polyamide (PA-7.56 %), polystyrene (PS-6.88 %), polyvinyl chloride (PVC-2.64 %), ethylene vinyl acetate (EVA-2.60 %), polyetherurethane (PUR-1.36 %), and acrylic (AC-0.8 %). Fibers were the most dominant shapes accounting for over 50 %. MPs were mainly smaller than 2 mm in size (71 %) and characterized by colorful aspects. These findings suggested that wastewater treatment plant (WWTP) effluents and anthropogenic activities (industry, tourism, sanitation, and fishing) are the major pollution sources of MPs in the study area. SEM/EDX micrographs showed different weathering degrees and chemical elements adhered to the MPs surface.

A comparative study on aggregation and sedimentation of natural goethite and artificial Fe3O4 nanoparticles in synthetic and natural waters based on extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory and molecular dynamics simulations

Natural iron oxides nanomaterials have important roles in biogeochemical processes. In this study, the effects of pH, natural organic matter, and cations on aggregation and sedimentation of natural goethite and artificial Fe₃O₄ nanoparticles in water were investigated to learn more about the environmental behaviors of engineered and natural nanomaterials and how they differ. In addition, a novel extended DLVO theory that considered steric, gravitational, and magnetic attraction forces concurrently was specifically developed to provide mechanisms explanations. Specifically, Fe₃O₄ NPs were more likely than bulk goethite to aggregate (because of magnetic attraction interactions) at low HA concentrations and disperse at high HA concentrations. Besides, goethite was less prone to settle with the same concentration of NaCl than Fe₃O₄ NPs, but the opposite trend was found for the same concentration of CaCl₂ because of the difference in maximum net energy (barrier) and strong Ca²⁺ bridging effectiveness of goethite in CaCl₂ solution. Statistical models were established to evaluate colloidal stability of the particles. XPS and molecular dynamics simulation results suggested that ions were adsorbed onto particles via ionic polarization and that the binding free energies at high coverage followed the order Ca²⁺ > Na⁺ > Cl^- and presence of cation bridging between particles.

The effect of 100-200 nm ZnO and TiO2 nanoparticles on the in vitro-grown soybean plants

Engineered nanomaterials are increasingly used in everyday life applications and, in consequence, significant amounts are being released into the environment. From soil, water, and air they can reach the organelles of edible plants, potentially impacting the food chain and human health. The potential environmental and health impact of these nanoscale materials is of public concern. TiO2 and ZnO are among the most significant nanomaterials in terms of production amounts. Our study aimed at evaluating the effects of large-scale TiO2 (~100 nm) and ZnO (~200 nm) nanoparticles on soybean plants grown in vitro. The effect of different concentrations of nanoparticles (10, 100, 1000 mg/L) was evaluated regarding plant morphology and metabolic changes. ZnO nanoparticles showed higher toxicity compared to TiO2 in the experimental set-up. Overall, elevated levels of chlorophylls and proteins were observed, as well as increased concentrations of ascorbic and dehydroascorbic acids. Also, the decreasing stomatal conductance to water vapor and net CO2 assimilation rate show higher plant stress levels. In addition, ZnO nanoparticle treatments severely affected plant growth, while TEM analysis revealed ultrastructural changes in chloroplasts and rupture of leaf cell walls. By combining ICP-OES and TEM results, we were able to show that the nanoparticles were metabolized, and their internalization in the soybean plant tissues occurred in ionic forms. This behavior most likely is the main driving force of nanoparticle toxicity.