How Microbial Aggregates Protect against Nanoparticle Toxicity

Synergistic toxic effects of high-strength ammonia and ZnO nanoparticles on biological nitrogen removal systems and role of exogenous C10-HSL regulation

The inhibitory effects of zinc oxide nanoparticles (ZnO NPs) and impacts of N-acyl-homoserine lactone (AHL)-based quorum sensing (QS) on biological nitrogen removal (BNR) performance have been well-investigated. However, the effects of ammonia nitrogen (NH4+-N) concentrations on NP toxicity and AHL regulation have seldom been addressed yet. This study consulted on the impacts of ZnO NPs on BNR systems when high NH4+-N concentration was available. The synergistic toxic effects of high-strength NH4+-N (200 mg/L) and ZnO NPs resulted in decreased ammonia oxidation rates and dropped the nitrogen removal efficiencies by 17.5% ± 0.2%. The increased extracellular polymeric substances (EPS) production was observed in response to the high NH4+-N and ZnO NP stress, which indicated the defense mechanism against the toxic effects in the BNR systems was stimulated. Furthermore, the regulatory effects of exogenous N-decanoyl-homoserine lactone (C10-HSL)-mediated QS system on NP-stressed BNR systems were revealed to improve the BNR performance under different NH4+-N concentrations. The C10-HSL regulated the intracellular reactive oxygen species levels, denitrification functional enzyme activities, and antioxidant enzyme activities, respectively. This probably synergistically enhanced the defense mechanism against NP toxicity. However, compared to the low NH4+-N concentration of 60 mg/L, the efficacy of C10-HSL was inhibited at high NH4+-N levels of 200 mg/L. The findings provided the significant application potential of QS system for BNR when facing toxic compound shock threats.

Optimizing the placement of medical wastewater outlets in sewer systems to reduce chemical consumption at wastewater treatment plants

The severely low influent chemical oxygen demand (COD) concentration at wastewater treatment plants (WWTPs) has become a critical issue. A key factor is the excessive biodegradation of organic matter by microbial communities within sewer systems. Intense disinfection commonly adopted for medical wastewater leads to abundant residual chlorine entering sewers, likely causing significant changes in microbial communities and sewage quality in sewers, yet our understanding is limited. Through long-term sewer simulation batch tests, this study revealed the response mechanism of microbial communities to residual chlorine and its impact on organic matter concentration in sewage. Under residual chlorine stress, microbial community structure rapidly changed, and more complex microbial interactions were observed. Besides, pathways related to stress response such as two-component system were significantly enriched; pathways related to energy metabolism (such as carbon fixation in prokaryotes and citrate cycle) in microbial communities were inhibited, and carbon metabolism shifted from the Embden-Meyerhof pathway to the pentose phosphate pathway to enhance cellular reducing power, reduce oxidative stress, and consequently decrease organic matter degradation. Therefore, compared to sewers with normal disinfection, concentrations of COD and dissolved organic carbon in sewage under chlorine stress increased by 12.6 % and 7.4 %, respectively. Besides, the decay and transformation of residual chlorine in sewers were explored. These findings suggest a new approach to medical wastewater discharge management: placing the medical wastewater outlet at the upstream in sewer systems, which ensures that residual chlorine consumption reaches maximum during long-distance transportation, mitigating its harmful effects on WWTPs, and increases the influent organic matter concentration, thereby reducing the need for additional carbon sources.

Responses of colonization and development of periphytic biofilms to three typical tire wear particles with or without incubation-aging in migrating aqueous phases

Understanding the behavior of tire wear particles (TWPs) and their impact on aquatic environments after aging is essential. This study explored the characteristics of TWPs generated using different methods (rolling friction, sliding friction, and cryogenic milling) and their transformation after exposure to environmental conditions mimicking runoff and sewage, focusing on their effects on river water and periphytic biofilms. Laboratory experiments indicate that at low exposure levels (0.1 mg/L), TWPs promoted biofilm growth, likely due to zinc release acting as a nutrient and the aggregation of particles serving as biofilm scaffolds. However, at higher concentrations (100 mg/L), TWPs inhibited biofilm development. This inhibition is linked to toxic byproducts like N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone and environmentally persistent free radicals, which reduce biofilm biomass, alter algal diversity, and decrease the production of essential biofilm components such as proteins and polysaccharides, consistent with the inhibitory behavior of TWPs on bis-(3'-5')-cyclic diguanosine monophosphate and quorum sensing signals, including acyl-homoserine lactone and autoinducer-2. Aging processes, particularly after simulated sewage treatment, further affect ecological impacts of TWPs, reducing the benefits observed at low concentrations and intensifying the negative effects at high concentrations. Contribution of here lies in systematically revealing the impact of TWPs on the development of aquatic biofilms, emphasizing the logical relationship between their aging characteristics, environmental behavior, and ecological risks. It assesses not only the release effects of typical additives and conventional size effects but also highlights the emerging photochemical toxicity (persistent free radicals), thus providing valuable insights into the aquatic ecological risk assessment of TWPs.

Deciphering the role of micro/nano-hydroxyapatite in aerobic granular sludge system: Effects on treatment performance and enhancement mechanism

Hydroxyapatite (HAP), a mineral nucleus identified within aerobic granular sludge (AGS), plays a vital role in enhancing the AGS systems. However, the microscopic mechanism underlying their roles remains largely unexplored. Herein, a systematic investigation was carried out to elucidate the impact and enhanced mechanisms associated with HAP of different sizes, i.e. micro-HAP (mHAP) and nano-HAP (nHAP), on the aerobic granulation, nutrient removal and microbial diversity of AGS. Results showed that the presence of nHAP and mHAP significantly shortened the granulation process to 15 and 20 days, respectively. This might be ascribed to the fact that the large specific surface area of nHAP aggregates was conducive to microbial adhesion, biomass accumulation and sludge granulation. Compared with mHAP, the granules with nHAP showed better settlement performance, mechanical strength and larger diameter. The X-ray diffraction (XRD) and Raman spectrometer analysis confirmed the presence of HAP within the granules, which was found to stimulate the secretion of extracellular polymeric substance, improve the compactness of granule structure and suppress the growth of filamentous bacteria, thereby contributing to a stable AGS system. The presence of HAP, especially nHAP, effectively enriched the functional microorganisms, such as nitrifying and denitrifying bacteria (e.g. Candidatus_Competibacter) and phosphorus accumulating organisms (e.g. Flavobacterium), leading to the improved nutrient removal efficiencies (COD > 96%, TN > 76%, and TP > 74%). Further analysis revealed the up-regulation of functional enzymes (e.g. nitrite oxidoreductase and polyphosphate kinase) involved in nutrient metabolism, underlying the inherent mechanisms for the excellent nutrient removal. This study deepens the understanding of granulation mechanisms from the perspective of mineral cores, and proposes an economically feasible strategy for rapid initiation and stabilization of AGS reactors.

N-acyl homoserine lactones (AHLs) enhanced removal of cadmium and other pollutants by algae-bacteria consortia

Signal transduction is an important mode of algae-bacteria interaction, in which bacterial quorum sensing (QS) may affect microalgal growth and metabolism. Currently, little is known whether acyl homoserine lactones (AHLs) released by bacteria can affect the pollutant removal by algae-bacteria consortia (ABC). In this study, we constructed ABC using Chlorella vulgaris (Cv) with two AHLs-producing bacteria and investigated their performance in the removal of multiple pollutants, including chemical oxygen demand (COD), total nitrogen (TN), phosphorus (P), and cadmium (Cd). The AHLs-producing bacteria, namely Agrobacterium sp. (Ap) and Ensifer adherens (Ea), were capable of forming a symbiosis with C. vulgaris. Consortia of Cv and Ap with ratio of 2:1 (Cv2-Ap1) showed the optimal growth promotion and higher removal of Cd, COD, TN, and P compared to the C. vulgaris monoculture. Cv2-Ap1 ABC removed 36.1-47.5% of Cd, 94.5%-94.6% COD, 37.1%-56.0% TN, and 90.4%-93.5% P from the culture medium. In addition, increase of intracellular neutral lipids and extracellular protein, as well as the types of functional groups on cell surface contributed to Cd removal and tolerance in the Cv2-Ap1 ABC. Six AHLs were detected in the Cv2-Ap1 culture. Among these, 3OC8-HSL and 3OC12-HSL additions promoted the ABC growth and enhanced their Cd accumulation. These findings may contribute to further understanding of AHL-mediated communication between algae and bacteria and provide support bioremediation efforts of metal-containing wastewater.

A systematic review of antibiotics and antibiotic resistance genes (ARGs) in mariculture wastewater: Antibiotics removal by microalgal-bacterial symbiotic system (MBSS), ARGs characterization on the metagenomic

Antibiotic residues in mariculture wastewater seriously affect the aquatic environment. Antibiotic Resistance Genes (ARGs) produced under antibiotic stress flow through the environment and eventually enter the human body, seriously affecting human health. Microalgal-bacterial symbiotic system (MBSS) can remove antibiotics from mariculture and reduce the flow of ARGs into the environment. This review encapsulates the present scenario of mariculture wastewater, the removal mechanism of MBSS for antibiotics, and the biomolecular information under metagenomic assay. When confronted with antibiotics, there was a notable augmentation in the extracellular polymeric substances (EPS) content within MBSS, along with a concurrent elevation in the proportion of protein (PN) constituents within the EPS, which limits the entry of antibiotics into the cellular interior. Quorum sensing stimulates the microorganisms to produce biological responses (DNA synthesis - for adhesion) through signaling. Oxidative stress promotes gene expression (coupling, conjugation) to enhance horizontal gene transfer (HGT) in MBSS. The microbial community under metagenomic detection is dominated by aerobic bacteria in the bacterial-microalgal system. Compared to aerobic bacteria, anaerobic bacteria had the significant advantage of decreasing the distribution of ARGs. Overall, MBSS exhibits remarkable efficacy in mitigating the challenges posed by antibiotics and resistant genes from mariculture wastewater.

Inhibition of phosphorus removal performance in activated sludge by Fe(III) exposure: transitions in dominant metabolic pathways

Introduction

Simultaneous chemical phosphorus removal process using iron salts (Fe(III)) has been widely utilized in wastewater treatment to meet increasingly stringent discharge standards. However, the inhibitory effect of Fe(III) on the biological phosphorus removal system remains a topic of debate, with its precise mechanism yet to be fully understood.

Methods

Batch and long-term exposure experiments were conducted in six sequencing batch reactors (SBRs) operating for 155 days. Synthetic wastewater containing various Fe/P ratios (i.e., Fe/P = 1, 1.2, 1.5, 1.8, and 2) was slowly poured into the SBRs during the experimental period to assess the effects of acute and chronic Fe(III) exposure on polyphosphate-accumulating organism (PAO) growth and phosphorus metabolism.

Results

Experimental results revealed that prolonged Fe(III) exposure induced a transition in the dominant phosphorus removal mechanism within activated sludge, resulting in a diminished availability of phosphorus for bio-metabolism. In Fe(III)-treated groups, intracellular phosphorus storage ranged from 3.11 to 7.67 mg/g VSS, representing only 26.01 to 64.13% of the control. Although the abundance of widely reported PAOs (Candidatus Accumulibacter) was 30.15% in the experimental group, phosphorus release and uptake were strongly inhibited by high dosage of Fe(III). Furthermore, the abundance of functional genes associated with key enzymes in the glycogen metabolism pathway increased while those related to the polyphosphate metabolism pathway decreased under chronic Fe(III) stress.

Discussion

These findings collectively suggest that the energy generated from polyhydroxyalkanoates oxidation in PAOs primarily facilitated glycogen metabolism rather than promoting phosphorus uptake. Consequently, the dominant metabolic pathway of communities shifted from polyphosphate-accumulating metabolism to glycogen-accumulating metabolism as the major contributor to the decreased biological phosphorus removal performance.

Metabolic response of bacterial community to sodium hypochlorite and ammonia nitrogen affected the antibiotic resistance genes in pipelines biofilm

The biofilm is important for the antibiotic resistance genes (ARGs) propagation in drinking water pipelines. This study investigated the influence of chlorine disinfection and ammonia nitrogen on the ARGs in pipelines biofilm using metagenomic and metabolomics analysis. Chlorine disinfection reduced the relative abundance of unclassified_c_Actinobacteria, Acidimicrobium, and Candidatus_Pelagibacter to 394-430 TPM, 114-123 TPM, and 49-54 TPM, respectively. Correspondingly, the ARGs Saur_rpoC_DAP, macB, and mfd was reduced to 8-12 TPM, 81-92 TPM and 30-35 TPM, respectively. The results of metabolomics suggested that chlorine disinfection suppressed the pathways of ABC transporters, fatty acid biosynthesis, biosynthesis of unsaturated fatty acids, and biosynthesis of amino acids. These pathways were related to the cell membrane integrality and extracellular polymeric substances (EPS) secretion. Chlorine disinfection induced the decrease of EPS-related genes, resulting in the lower relative abundance of bacterial community and their antibiotic resistance. However, added approximately 0.5 mg/L NH3-N induced up-regulation of these metabolic pathways. In addition, NH3-N addition increased the relative abundance of enzymes related to inorganic and organic nitrogen metabolic pathway significantly, such as ammonia monooxygenase, glutamine synthetase, and glutamate synthase. Due to the EPS protection and nitrogen metabolism, the relative abundance of the main bacterial genera and the related ARGs increased to the level equal to that in pipelines biofilm with no disinfection. Therefore, NH3-N reduced the ARGs removal efficiency of chlorine disinfection. It is necessary to take measures to improve the removal rate of NH3-N and ARGs for preventing their risks in drinking water.

Stimuli-responsive biodegradable silica nanoparticles: From native structure designs to biological applications

Due to their inherent advantages, silica nanoparticles (SiNPs) have greatly potential applications as bioactive materials in biosensors/biomedicine. However, the long-term and nonspecific accumulation in healthy tissues may give rise to toxicity, thereby impeding their widespread clinical application. Hence, it is imperative and noteworthy to develop biodegradable and clearable SiNPs for biomedical purposes. Recently, the design of multi-stimuli responsive SiNPs to improve degradation efficiency under specific pathological conditions has increased their clinical trial potential as theranostic nanoplatform. This review comprehensively summaries the rational design and recent progress of biodegradable SiNPs under various internal and external stimuli for rapid in vivo degradation and clearance. In addition, the factors that affect the biodegradation of SiNPs are also discussed. We believe that this systematic review will offer profound stimulus and timely guide for further research in the field of SiNP-based nanosensors/nanomedicine.

OpiCa1-PEG-PLGA nanomicelles antagonize acute heart failure induced by the cocktail of epinephrine and caffeine

Background

Reducing Ca2+ content in the sarcoplasmic reticulum (SR) through ryanodine receptors (RyRs) by calcin is a potential intervention strategy for the SR Ca2+ overload triggered by β-adrenergic stress in acute heart diseases.

Methods

OpiCal-PEG-PLGA nanomicelles were prepared by thin film dispersion, of which the antagonistic effects were observed using an acute heart failure model induced by epinephrine and caffeine in mice. In addition, cardiac targeting, self-stability as well as biotoxicity were determined.

Results

The synthesized OpiCa1-PEG-PLGA nanomicelles were elliptical with a particle size of 72.26 nm, a PDI value of 0.3, and a molecular weight of 10.39 kDa. The nanomicelles showed a significant antagonistic effect with 100 % survival rate to the death induced by epinephrine and caffeine, which was supported by echocardiography with significantly recovered heart rate, ejection fraction and left ventricular fractional shortening rate. The FITC labeled nanomicelles had a strong membrance penetrating capacity within 2 h and cardiac targeting within 12 h that was further confirmed by immunohistochemistry with a self-prepared OpiCa1 polyclonal antibody. Meanwhile, the nanomicelles can keep better stability and dispersibility in vitro at 4 °C rather than 20 °C or 37 °C, while maintain a low but stable plasma OpiCa1 concentration in vivo within 72 h. Finally, no obvious biotoxicities were observed by CCK-8, flow cytometry, H&E staining and blood biochemical examinations.

Conclusion

Our study also provide a novel nanodelivery pathway for targeting RyRs and antagonizing the SR Ca2+ disordered heart diseases by actively releasing SR Ca2+ through RyRs with calcin.

Automatically showing microbial growth kinetics with a high-performance microbial growth analyzer

It is difficult to show microbial growth kinetics online when they grow in complex matrices. We presented a novel strategy to address this challenge by developing a high-performance microbial growth analyzer (HPMGA), which employed a unique 32-channel capacitively coupled contactless conductivity detector as a sensing element and fixed with a CellStatz software. It was capable of online showing accurate and repeatable growth curves of well-dispersed and bad-dispersed microbes, whether they grew in homogeneous simple culture broth or heterogeneous complex matrices. Moreover, it could automatically report key growth kinetics parameters. In comparison to optical density (OD), plate counting and broth microdilution (BMD) methods, we demonstrated its practicability in five scenarios: 1) the illustration of the growth, growth rate, and acceleration curves of Escherichia coli (E. coli); 2) the antimicrobial susceptibility testing (AST) of Oxacillin against Staphylococcus aureus (S. aureus); 3) the determination of Ag nanoparticle toxicity on Providencia rettgeri (P. rettgeri); 4) the characterization of milk fermentation; and 5) the enumeration of viable pathogenic Vibrio in shrimp body. Results highlighted that the HPMGA method had the advantages of universality and effectivity. This technology would significantly facilitate the routine analysis of microbial growth in many fields (biology, medicine, clinic, life, food, environment, and ecology), paving an avenue for microbiologists to achieve research goals that have been inhibited for years due to a lack of practical analytical methods.

Improving antibacterial ability of Ti-Cu thin films with co-sputtering method

Due to the resistance of some bacteria to antibiotics, research in the field of dealing with bacterial infections is necessary. A practical approach utilized in this study involves the preparation of an antibacterial thin film on the surfaces, which can effectively inhibit and reduce biofilm formation and bacterial adherence. In this study, we report the fabrication of bactericidal titanium (Ti) and copper (Cu) surfaces which involves a powerful co-sputtering method. This method provides a situation in which constituent elements are deposited simultaneously to control the composition of the thin film. Prepared samples were examined by energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and contact angle measurements. To evaluate antibacterial behavior, we used two bacterial strains Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). Antibacterial activity of the prepared sample was assessed by determining the number of colony-forming units per milliliter (CFU/ml) using a standard viable cell count assay. Results indicated that as the Cu concentration increased, the nanoscale surfaces became rougher, with roughness values rising from 11.85 to 49.65 nm, and the contact angle increased from 40 to 80 degrees, indicating a hydrophilic character. These factors play a significant role in the antibacterial properties of the surface. The Ti-Cu films displayed superior antibacterial ability, with a 99.9% reduction (equivalent to a 5-log reduction) in bacterial viability after 2 h compared to Ti alone against both bacterial strains. Field emission scanning electron microscopy (FE-SEM) images verified that both E. coli and S. aureus cells were physically deformed and damaged the bacterial cell ultrastructure was observed. These findings highlight that adding Cu to Ti can improve the antibacterial ability of the surface while inhibiting bacterial adherence. Therefore, the Ti14-Cu86 sample with the highest percentage of Cu had the best bactericidal rate. Investigation of toxicity of Cu-Ti thin films was conducted the using the MTT assay, which revealed their biocompatibility and absence of cytotoxicity, further confirming their potential as promising biomaterials for various applications.

Biofilm formation on polyethylene microplastics and their role as transfer vector of emerging organic pollutants

Microplastic (MP)-colonizing microorganisms are important links for the potential impacts on environmental, health, and biochemical circulation in various ecosystems but are not yet well understood. In addition, biofilms serve as bioindicators for the evaluation of pollutant effects on ecosystems. This study describes the ability of three polyethylene-type microplastics, white (W-), blue (B-), and fluorescent blue (FB-) MPs, to support microbial colonization of Pseudomonas aeruginosa, the effect of mixed organic contaminants (OCs: amoxicillin, ibuprofen, sertraline, and simazine) on plastic-associated biofilms, and the role of biofilms as transfer vectors of such emerging pollutants. Our results showed that P. aeruginosa had a strong ability to produce biofilms on MPs, although the protein amount of biomass formed on FB-MP was 1.6- and 2.4-fold higher than that on B- and W-MP, respectively. When OCs were present in the culture medium, a decrease in cell viability was observed in the W-MP biofilm (65.0%), although a general impairing effect of OCs on biofilm formation was ruled out. Microbial colonization influenced the ability of MPs to accumulate OCs, which was higher for FB-MP. In particular, the sorption of amoxicillin was lower for all bacterial-colonized MPs than for the bare MPs. Moreover, we analysed oxidative stress production to assess the impact of MPs or MPs/OCs on biofilm development. The exposure of biofilms to OCs induced an adaptive stress response reflected in the upregulation of the katB gene and ROS production, particularly on B- and FB-MP. This study improves our understanding of MP biofilm formation, which modifies the ability of MPs to interact with some organic pollutants. However, such pollutants could hinder microbial colonization through oxidative stress production, and thus, considering the key role of biofilms in biogeochemical cycles or plastic degradation, the co-occurrence of MPs/OCs should be considered to assess the potential risks of MPs in the environment.

Dissolved oxygen benefits N-decanoyl-homoserine lactone regulated biological nitrogen removal system to resist acute ZnO nanoparticle exposure

The beneficial effects of N-decanoyl-homoserine lactone (C₁₀-HSL), one of the typical N-acyl-homoserine lactones on biological nitrogen removal (BNR) system to resist the acute exposure of zinc oxide nanoparticles (ZnO NPs) has attracted extensive attentions. Nevertheless, the potential impact of dissolved oxygen (DO) concentration on the regulatory capacity of C₁₀-HSL in the BNR system has yet to be investigated. This study conducted a systematic investigation of the impact of DO concentration on the C₁₀-HSL-regulated BNR system against short-term ZnO NP exposure. Based on the findings, sufficient DO played a crucial role to improve the BNR system's resistance capacity to ZnO NPs. Under the micro-aerobic condition (0.5 mg/L DO), the BNR system was more sensitive to ZnO NPs. The ZnO NPs induced increased intracellular reactive oxygen species (ROS) accumulation, reduced antioxidant enzyme activities, and decreased specific ammonia oxidation rates in the BNR system. Furthermore, the exogenous C₁₀-HSL had a positive effect on the BNR system's resistance to ZnO NP-induced stress, primarily by decreasing ZnO NPs-induced ROS generation and improving ammonia monooxygenase activities, especially under low DO concentrations. The findings contributed to the theoretical foundation for regulation strategy development of wastewater treatment plants under NP shock threat.

Pristine and Sulfidized Zinc Oxide Nanoparticles Promote the Release and Decomposition of Organic Carbon in the Legume Rhizosphere

The effects and mechanisms of zinc oxide nanoparticles (ZnO NPs) and their aging products, sulfidized (s-) ZnO NPs, on the carbon cycling in the legume rhizosphere are still unclear. We observed that, after 30 days of cultivation, in the rhizosphere soil of Medicago truncatula, under ZnO NP and s-ZnO NP treatments, the dissolved organic carbon (DOC) concentrations were significantly increased by 1.8- to 2.4-fold compared to Zn²⁺ treatments, although the soil organic matter (SOM) contents did not change significantly. Compared to Zn²⁺ additions, the additions of NPs significantly induced the production of root metabolites such as carboxylic acids and amino acids and also stimulated the growth of microbes involved in the degradations of plant-derived and recalcitrant SOM, such as bacteria genera RB41 and Bryobacter, and fungi genus Conocybe. The bacterial co-occurrence networks indicated that microbes associated with SOM formation and decomposition were significantly increased under NP treatments. The adsorption of NPs by roots, the generation of root metabolites (e.g., carboxylic acid and amino acid), and enrichment of key taxa (e.g., RB41 and Gaiella) were the major mechanisms by which ZnO NPs and s-ZnO NPs drove DOC release and SOM decomposition in the rhizosphere. These results provide new perspectives on the effect of ZnO NPs on agroecosystem functions in soil-plant systems.

Dynamic responses of carbon metabolism of sediment microbial communities to Ag nanoparticles: Effects of the single and repeated exposure scenarios

The widespread use of nanosilver will inevitably lead to their release into aquatic environment, threating the health of freshwater ecosystem. The toxic effects of silver nanoparticles (AgNPs) on sediment microbial diversity, community composition, and functional enzyme activity are well established, while little is known about how sediment microbes dynamically respond to the stress of different AgNPs exposure scenarios. Herein, microcosm experiments were performed to investigate the impacts of repeated (1 mg/L, applied every 6 days for 10 times) and single (10 mg/L) exposure scenarios of AgNPs on the specific functions of sediment microbes (5-60 days). The carbon metabolism of sediment microbial communities was measured using BIOLOG ECO microplates, and carbon metabolic rate and functional diversity indices were calculated. Compared to control group, the maximum carbon source utilization capacity of the microbial community increased by 6.6 and 15.4 % in the single and repeated exposure group, respectively. And the metabolic rates of sediment microorganisms were significant increased by 6.1 % in the repeated exposure group, which suggested that repetitive low-dosing of AgNPs induce a larger alteration of both capacity and rate of microbial carbon metabolism. Notably, different AgNPs exposure scenarios resulted in a shift in the carbon source preference of the microorganisms. After exposure for 60 days, compared with the controls, the ability to utilize polymers was significantly increased by 51.5 and 21.7 % in the single and repeated exposure groups, respectively, and decreased by 33.7 and 10.5 % in the utilization of miscellaneous, both exhibiting significant differences (P < 0.05), implying that AgNPs exposure scenarios affected the microbial-mediated carbon cycling processes in sediment. These results highlight that different exposure scenarios of AgNPs have different effects on the carbon metabolism capacity of microbial communities, thus affecting the carbon cycling processes in which microorganisms are involved.

Microplastics trigger the Matthew effect on nitrogen assimilation in marine diatoms at an environmentally relevant concentration

Microplastics (MPs, diameter <5 mm) are widely distributed on Earth, especially in the oceans. Diatoms account for ∼40% of marine primary productivity and affect the global biogeochemical cycles of macroelements. However, the effects of MPs on marine nitrogen cycling remain poorly understood, particularly comparisons between nitrogen-replete and nitrogen-limited conditions. We found that MPs trigger the Matthew effect on nitrogen assimilation in diatoms, where MPs inhibited nitrogen assimilation under nitrogen-limited conditions while enhancing nitrogen metabolism under nitrogen-replete conditions in Phaeodactylum tricornutum. Nitrate reductase (NR) and nitrite reductase (NIR) are upregulated, but nitrate transporter (NRT) and glutamine synthetase (GS) are downregulated by MPs under nitrogen-limited conditions. In contrast, NR, NIR, and GS are all upregulated by MPs under nitrogen-replete conditions. MPs accelerate nitrogen anabolic processes with an increase in the accumulation of carbohydrates by 80.7 ± 7.9% and enhance the activities of key nitrogen-metabolizing enzymes (8.20-44.90%) under nitrogen-replete conditions. In contrast, the abundance of carbohydrates decreases by 22.0-34.4%, and NRT activity is inhibited by 79.0-86.5% in nitrogen-limited algae exposed to MPs. Metabolomic and transcriptomic analyses were performed to further explore the molecular mechanisms of reprogrammed nitrogen assimilation, including carbon metabolism, nitrogen transport and ammonia assimilation. The aforementioned spatial redistribution (e.g., the Matthew effect between nitrogen-replete and -limited conditions) of nitrogen assimilation highlights the potential risks of MP contamination in the ocean.

Analytical methods for assessing antimicrobial activity of nanomaterials in complex media: advances, challenges, and perspectives

Assessing the antimicrobial activity of engineered nanomaterials (ENMs), especially in realistic scenarios, is of great significance for both basic research and applications. Multiple analytical methods are available for analysis via off-line or on-line measurements. Real-world samples are often complex with inorganic and organic components, which complicates the measurements of microbial viability and/or metabolic activity. This article highlights the recent advances achieved in analytical methods including typical applications and specifics regarding their accuracy, cost, efficiency, and user-friendliness. Methodological drawbacks, technique gaps, and future perspectives are also discussed. This review aims to help researchers select suitable methods for gaining insight into antimicrobial activities of targeted ENMs in artificial and natural complex matrices.

Moisture-Enabled Germination of Heat-Activated Bacillus Endospores for Rapid and Practical Bioelectricity Generation: Toward Portable, Storable Bacteria-Powered Biobatteries

Small-scale battery-like microbial fuel cells (MFCs) are a promising alternative power source for future low-power electronics. Controllable microbial electrocatalytic activity in a miniaturized MFC with unlimited biodegradable energy resources would enable simple power generation in various environmental settings. However, the short shelf-life of living biocatalysts, few ways to activate the stored biocatalysts, and extremely low electrocatalytic capabilities render the miniature MFCs unsuitable for practical use. Here, heat-activated Bacillus subtilis spores are revolutionarily used as a dormant biocatalyst that can survive storage and rapidly germinate when exposed to special nutrients that are preloaded in the device. A microporous, graphene hydrogel allows the adsorption of moisture from the air, moves the nutrients to the spores, and triggers their germination for power generation. In particular, forming a CuO-hydrogel anode and an Ag₂ O-hydrogel cathode promotes superior electrocatalytic activities leading to an exceptionally high electrical performance in the MFC. The battery-type MFC device is readily activated by moisture harvesting, producing a maximum power density of 0.4 mW cm^-2 and a maximum current density of 2.2 mA cm^-2 . The MFC configuration is readily stackable in series and a three-MFC pack produces enough power for several low-power applications, demonstrating its practical feasibility as a sole power source.

Sediment bacterial and fungal communities exhibit distinct responses to microplastic types and sizes in Taihu lake

Microplastics (MPs) are emerging contaminants in aquatic environments, yet their impact on sediment microbiota and biogeochemical processes were not well reported. Herein, microcosm experiments were performed to investigate the effects of MPs (Polystyrene, PS and Polyethylene, PE) with three size classes (ranging from 100 nm to 150-200 μm) on sediment bacterial and fungal communities over 60-day incubation from Taihu Lake. High-throughput sequencing revealed the alpha diversities of bacterial and fungal communities were reduced by MPs, dependent on MPs' size and type. Bacterial community structures were significantly altered under all MPs treatments, with clustering for the same size class for PS and PE. Fungal community structures were significantly affected for all MPs, with PS and PE exhibiting different effects. Co-occurrence network analysis suggested MPs changed bacterial and fungal network complexities. Proteobacteria and Ascomycota formed strong associations with other phyla and demonstrated tolerance to MPs exposure. Actinobacteria, Firmicutes, and Chytridiomycota were the main respondents to MPs. The enzyme concentrations were stimulated by MPs, indicating carbon and nitrogen uptakes might be increased. Therefore, PS and PE had similar impacts on the microbial community (particularly bacteria), and sizes of MPs were the main influencing factors. MPs shifted community structure and network with distinct responses from bacteria and fungi, likely leading to the alteration of microbial-involved carbon and nitrogen cycling.

Synergy between microalgae and microbiome in polluted waters

Microalga-microbiome interactions are central to both health and disease of aquatic environments. Despite impressive advances in deciphering how microorganisms participate in and impact aquatic ecosystems, the evolution and ecological involvement of microalgae and the microbiome in polluted waters are typically studied independently. Here, the phycosphere (i.e., the consortia of microalgae and the related microbiome) is regarded as an independent and integrated life form, and we summarize the survival strategies exhibited by this symbiont when exposed to anthropogenic pollution. We highlight the cellular strategies and discuss the modulation at the transcriptional and population levels, which reciprocally alters community structure or genome composition for medium-term acclimation or long-term adaptation. We propose a 'PollutantBiome' concept to help the understanding of microalga-microbiome interactions and development of beneficial microbial synthetic communities for pollutant remediation.

Distribution of methanogenic and methanotrophic consortia at soil-water interfaces in rice paddies across climate zones

Periphytic biofilms (PB) at the soil-water interface contributes 7-38% of the methane emission from rice paddies, yet the biogeographical mechanism underlying and affecting the process remain elusive. In this study, rice fields along an edapho-vclimatic gradient were sampled, and the environmental drivers affecting distribution of methanogenic and methanotrophic communities were evaluated. The methanogenic and methanotrophic communities at soil-water interface showed less complex inter/intra-generic interactions than those in soil, and their relative abundances were weakly driven by spatial distance, soil organic carbon, soil total nitrogen and pH. The nutrient supply and buffering capacity of extracellular polymeric substance released by PB reduced their interaction and enhanced the resilience on edaphic environment changes. Climate affected soil metal content, extracellular polymeric substance content, and thus the methane-related communities, and caused geographical variation in the impacts of PB on methane emissions from rice paddies. This study facilitates our understanding of geographical differences in the contribution of PB to methane emission.

The quorum sensing system of Novosphingobium sp. ERN07 regulates aggregate formation that promotes cyanobacterial growth

Microbial aggregates play key roles in cyanobacterial blooms. Being a bacterial communication mechanism, quorum sensing (QS) synchronizes gene expression in a density-dependent manner and regulates bacterial physiological behavior. However, the regulatory role of QS in the formation of cyanobacteria-associated bacterial aggregates remains poorly understood. Here, we present insight into the role of QS in regulating bacterial aggregate formation in a representative bacterial strain, Novosphingobium sp. ERN07, which was isolated from Microcystis blooms in Lake Taihu. A biosensor assay showed that ERN07 exhibits significant AHL-producing capacity. Biochemical and microscopic analysis revealed that this strain possesses the ability to form aggregated communities. Gene knockout experiments indicated that the AHL-mediated QS system positively regulates bacterial aggregation. The aggregated communities possess the ability to enhance the production of extracellular polymeric substances (EPS), alter EPS composition ratios, and affect biofilm formation. The addition of aggregated substances also has a significant growth-promoting effect on M. aeruginosa. Transcriptomic analysis revealed that the aggregated substances positively regulate photosynthetic efficiency and energy metabolism of M. aeruginosa. These findings show that QS can mediate the aggregation phenotype and associated substrate spectrum composition, contributing to a better understanding of microalgal-bacterial interactions and mechanisms of Microcystis bloom maintenance in the natural environment.

Response of the mainstream anammox process to the biodegradable carbon sources in the granule-based systems: The difference in self-stratification of the microbial community

The inevitable introduction of biodegradable carbon sources (such as monosaccharides and volatile fatty acids) originating from pretreatment units might affect the performance of the mainstream anaerobic ammonium oxidation (anammox) process. Two model carbon sources (glucose and acetate) were selected to investigate their effects on granule-based anammox systems under mainstream conditions (70 mg total nitrogen (TN) L^-1, 15 °C). At a nitrogen loading rate of 2.87 ± 0.80 kg N m^-3 d^-1, a satisfactory effluent quality (TN < 10 mg L^-1) was achieved in the presence of glucose or acetate at a chemical oxygen demand (COD/N) ratio of 0.5. The contribution of anammox to nitrogen removal decreased with increasing COD/N ratio to 1.0 because the expression of anammox functional genes was inhibited, whereas the expression of denitrifying functional genes was promoted. However, the nitrogen removal efficiency of the two considered reactors was maintained above 80 %. Self-stratification of the microbial community along the reactor height facilitated a functional balance through the retention of anammox bacteria in granules but resulted in washout of denitrifying bacteria in flocs under a high-flow pattern. These findings highlighted the advantages of granule-based systems in the mainstream anammox process due to their inherent biomass self-segregation property and the need for the development of targeted biomass retention strategies.

Phage Predation Promotes Filamentous Bacterium Piscinibacter Colonization and Improves Structural and Hydraulic Stability of Microbial Aggregates

Although bacteria-phage interactions have broad environmental applications and ecological implications, the influence of phage predation on bacterial aggregation and structural stability remains largely unexplored. Herein, we demonstrate that inefficient lytic phage predation can promote host filamentous bacterium Piscinibacter colonization onto non-host Thauera aggregates, improving the structural and hydraulic stability of the dual-species aggregates. Specifically, phage predation at 10³-10⁴ PFU/mL (i.e., multiplication of infection at 0.01-0.1) promoted initial Piscinibacter colonization by 10-15 folds and resulted in 29-31% higher abundance of Piscinibacter in the stabilized aggregates than that in the control aggregates without phage predation. Transcriptomic analysis revealed upregulated genes related to quorum sensing (by 15-92 folds) and polysaccharide secretion (by 10-90 folds) within the treated aggregates, which was consistent with 120-172% higher content of polysaccharides for the treated dual-species aggregates. Confocal laser scanning microscopic images further confirmed the increase of filamentous bacteria and polysaccharides (both with wider distribution) within the dual-species aggregates. Accordlingly, the aggregates' structural strength (via atomic force microscopes) and shear resistance (via hydraulic stress tests) increased by 77 and 42%, respectively, relative to the control group. In the long-term experiments, the enhanced hydraulic stability of the treated aggregates could facilitate dwelling bacteria propagation in flow-through conditions. Overall, our study demonstrates that phage predation can promote bacterial aggregation and enhance aggregate structural stability, revealing the beneficial role of lytic phage predation on bacterial symbiosis and environmental adaptivity.

Pluripotency of endogenous AHL-mediated quorum sensing in adaptation and recovery of biological nitrogen removal system under ZnO nanoparticle long-term exposure

The impacts of quorum sensing (QS) on nanoparticle (NP)-stressed biological nitrogen removal (BNR) system have seldom been addressed yet. In this study, the contributions of endogenous N-acyl-homoserine lactone (AHL)-based QS regulation to the BNR system's adaptation to the zinc oxide (ZnO) NP stress and its recovery potential were systematically investigated. Although 1 mg/L ZnO NPs exerted little impact on the BNR system, chronic exposure to 10 mg/L ones depressed the system's BNR performance which irreversibly impaired the nitrification process even when the system entered the recovery period with no NP added anymore. Meanwhile, ZnO NPs exhibited hormesis effects on the production of AHLs and extracellular polymeric substance (EPS), and activities of superoxide dismutase and catalase. During the ZnO NP exposure period, C₄-HSL, C₆-HSL, and C₁₀-HSL were discovered to be positively associated with nitrogen removal efficiency, tightly-bound EPS production, and antioxidase activities. Besides, the shifts of Nitrospira, Dechloromonas, Aeromonas, Acinetobacter, Delftia, and Bosea were expected to determine the AHL's dynamic distribution. During the system's recovery stage, Dechloromonas replaced Candidatus_Competibacter as the dominant denitrification-related genus. Dechloromonas abundance elevated with the increased contents of C₄-HSL in the aqueous and EPS phases and C₁₀-HSL in EPS and sludge phases, and were expected to promote the activities of BNR-related and antioxidant enzymes, and the EPS production to assist in the recovery of the impaired system's BNR performance. The QS-related BNR genera exhibited higher resilience to ZnO NPs than quorum quenching-related ones, indicating their critical role in nitrogen removal in the restored system. This work provided an insight into the potential pluripotency of AHL-based QS regulation on the ZnO NP-stressed BNR system's adaptation and recovery.

Biofilm formation during wastewater treatment: Motility and physiological response of aerobic denitrifying bacteria under ammonia stress based on surface plasmon resonance imaging

A bacterial image analysis system based on surface plasmon resonance imaging was established to investigate the effect of bacterial motility on biofilm formation under high ammonia nitrogen at the single-cell level. The results showed that the bacterial mean rotation speed and vertical motility distance decreased with the increasing concentration of ammonia nitrogen. Ammonia nitrogen inhibited the metabolic activity of the bacteria, decreasing bacterial motility. Bacterial motility was negatively correlated with the biofilm-formation ability. The biofilm formation ability of Enterobacter cloacae strain HNR exposed to ammonia nitrogen was enhanced by reducing its movement and promoting EPS secretion. Genes related to the tricarboxylic acid cycle and oxidative phosphorylation were down-regulated, indicating inhibition of microbial energy metabolism. Genes related to bacterial secretion and lipopolysaccharide synthesis were up-regulated, facilitating the formation of biofilms and enabling the bacteria to resist ammonia nitrogen stress. This study provides new insights into the biofilm formation under ammonia stress.

Periphytic biofilms-mediated microbial interactions and their impact on the nitrogen cycle in rice paddies

Rice paddies are unique waterlogged wetlands artificially constructed for agricultural production. Periphytic biofilms (PBs) at the soil-water interface play an important role in rice paddies characterized by high nutrient input but low utilization efficiency. PBs are composed of microbial aggregates, including a wide variety of microorganisms (algae, bacteria, fungi, protozoa, and metazoa), extracellular polymeric substances and minerals (iron, aluminum, and calcium), which form an integrated food web and energy flux within a relatively stable micro-ecosystem. PBs are crucial to regulate and streamline the nitrogen cycle by neutralizing nitrogen losses and improving rice production since PBs can serve as both a sink by capturing surplus nitrogen and a source by slowly re-releasing this nitrogen for reutilization. Here the ecological advantages of PBs in regulating the nitrogen cycle in rice paddies are illustrated. We summarize the key functional importance of PBs, including the intricate and delicate community structure, microbial interactions among individual phylotypes, a wide diversity of self-produced organics, the active adaptation of PBs to constantly changing environments, and the intricate mechanisms by which PBs regulate the nitrogen cycle. We also identify the future challenges of microbial interspecific cooperation in PBs and their quantitative contributions to agricultural sustainability, optimizing nitrogen utilization and crop yields in rice paddies.

Unveiling significance of Ca2+ ion for start-up of aerobic granular sludge reactor by distinguishing its effects on physicochemical property and bioactivity of sludge

Almost all of the aerobic granular sludge (AGS) reactors were fed on certain amounts of Ca²⁺ ion, but whether and why it was necessary for reactor start-up remain unknown. Herein, this study conducted a set of comparative experiments in three AGS reactors, which were operated in parallel with Ca²⁺ addition in R3, hydroxyapatite (HAP) addition in R1, and without any forms of Ca addition in R2. Results showed that R3 not only achieved the complete granulation of sludge, but exhibited superior performance of COD and nutrient removal. In contrast, R1 had a slightly quicker granulation rate than R3 (R1: 0.07 day^-1; R3: 0.06 day^-1), but the formed granules could not efficiently degrade pollutants. In R2, both sludge granulation and pollutants removal did not proceed normally. Further investigations found that the Ca²⁺ ion acted in three ways: (1) it increased inorganic composition of sludge to promote granulation; (2) the transformed HAP strengthened stability of granular structure; (3) it ensured bioactivity of granules by driving enrichment of functional microbes and synthesis of metabolism enzymes. Overall, this study systemically proved significance of Ca²⁺ ion for the start-up of AGS reactors and its influencing mechanisms on different properties of granules.

Protonated carbon nitride elicits microalgae for water decontamination

Comprehending the effects of synthetic nanomaterials on natural microorganisms is critical for the development of emerging nanotechnologies. Compared to artificial inactivation of microbes, the up-regulation of biological functions should be more attractive due to the possibility of discovering unexpected properties. Herein, a nanoengineering strategy was employed to tailor g-C₃N₄ for the metabolic regulation of algae. We found that surface protonated g-C₃N₄ (P-C₃N₄) as a nanopolymeric elicitor enabled the reinforced biological activity of Microcystis aeruginosa and Scenedesmus for harmful substances removal. Metabolomics analysis suggested that synthetic nanoarchitectures induced moderate oxidative stress of algae, with up-regulated biosynthesis of extracellular polymeric substances (EPS) for resisting the physiological damage caused by toxic substances in water. The formation of oxidative ^.O₂^- contributed to over five-fold enhancement in the biodecomposition of harmful aniline. Our study demonstrates a synergistic biotic-abiotic platform with valuable outcomes for various customized applications.

Effects of Selenium in Different Valences on the Community Structure and Microbial Functions of Biofilms

With the wide application of selenium (Se) in industrial production, different Se-based compounds (selenate and selenite) are produced and released into aquatic environments. The potential impacts of such Se compounds on the biofilms (a complex microbial aggregate in aquatic systems) need to be substantially explored. Herein, we investigated the responses of bacterial community diversity, composition and structure, and function of biofilms after 21 days of exposure to low concentrations (100 µg/L) and high concentrations (1 mg/L) of sodium selenate and sodium selenite, respectively. Distinct effects of selenium in different valences on the community structure and microbial functions of biofilms were observed. Compared with the controls, the addition of selenate and selenite solutions altered the richness of biofilms but not the diversity, which is dependent on the concentration and valences, with sodium selenite (1 mg/L) exhibiting a strong inhibition effect on community richness. Significant changes of community composition and structure were observed, with a significant increase in Proteobacteria (31.08–58.00%) and a significant decrease in Bacteroidetes (32.15–11.45%) after exposure to sodium selenite with high concentration. Also, different responses of gamma-Proteobacteria and alpha-Proteobacteria were observed between the sodium selenite and sodium selenate treatments. Moreover, results showed that sodium selenite could strengthen the function of the metabolism of biofilms, and the higher the concentration is, the more apparent the enhancement effect is. All these results suggested that the effects of different valence states of selenium were obvious, and sodium selenite with high concentration strongly changed the diversity, structure and function of biofilms.

Impacts of engineered nanoparticles and antibiotics on denitrification: Element cycling functional genes and antibiotic resistance genes

The wide presence of antibiotics and minerals warrants their combined effects on the denitrification in natural aquatic environment. Herein, we investigated the effects of two antibiotics, sulfamethazine (SMZ) and chlortetracycline (CTC), on the reduction of NO₃^--N and accumulation of NO₂^--N in the absence and presence of engineered nanoparticles (NPs) (Al₂O₃, SiO₂, and geothite) using 16 S rRNA sequencing and high-throughput quantitative PCR. The results showed that the addition of antibiotics inhibited the reduction of NO₃^--N by changing the bacterial community structure and reducing the abundance of denitrification genes, while engineered NPs promoted the denitrification by increasing the abundance of denitrification genes. In the binary systems, engineered NPs alleviated the inhibitory effect of antibiotics through enriching the denitrification genes and adsorbing antibiotics. Antibiotics and its combination with engineered NPs changed the composition of functional genes related to C, N, P, S metabolisms (p < 0.01). The addition of antibiotics and/or engineered NPs altered the bacterial community structure, which is dominated by the genera of Enterobacter (40.7-90.5%), Bacillus (4.9-58.5%), and Pseudomonas (0.21-12.7%). The significant relationship between denitrification, carbon metabolism genes, and antibiotic resistance genes revealed that the heterotrophic denitrifying bacteria may host the antibiotic resistance genes and denitrification genes simultaneously. The findings underscore the significance of engineered NPs in the toxicity assessment of pollutants, and provide a more realistic insight into the toxicity of antibiotics in the natural aquatic environment.

Adaptation responses of microalgal-bacterial granular sludge to polystyrene microplastic particles in municipal wastewater

Microplastics are frequently detected in wastewater treatment plants, but the knowledge of their effects on microalgal-bacterial granular sludge (MBGS) is still unknown. This study investigated the performance and adaptive response of MBGS exposed in municipal wastewater in the presence of polystyrene (PS) microplastic particles with different sizes (i.e., 100 nm, 5 μm, and 10 μm). Results indicated that the average removal efficiency of influent organics, ammonia, and phosphorus by MBGS process was stable at above 85%, showing insignificant difference between three sizes of microplastic particles. The community richness of MBGS was reduced by nano-sized (i.e., 100 nm) and micro-sized (i.e., 5 μm) PS microplastic particles, while the community diversity decreased in all types. Although filamentous cyanobacteria were broken by PS microplastic particles, the performance of MBGS process was insignificantly affected due to the stimulated extracellular polymeric substances, which could act as adaptive responses and protect MBGS from stress damage. This study proves that MBGS process can be operated in the presence of prevalent PS microplastic particles.

Phosphorus removal and recovery: state of the science and challenges

Phosphorus is one of the main nutrients required for all life. Phosphorus as phosphate form plays an important role in different cellular processes. Entrance of phosphorus in the environment leads to serious ecological problems including water quality problems and soil pollution. Furthermore, it may cause eutrophication as well as harmful algae blooms (HABs) in aquatic environments. Several physical, chemical, and biological methods have been presented for phosphorus removal and recovery. In this review, there is an overview of phosphorus role in nature provided, available removal processes are discussed, and each of them is explained in detail. Chemical precipitation, ion exchange, membrane separation, and adsorption can be listed as the most used methods. Identifying advantages of these technologies will allow the performance of phosphorus removal systems to be updated, optimized, evaluate the treatment cost and benefits, and support select directions for further action. Two main applications of biochar and nanoscale materials are recommended.

Distinct Responses of Biofilm Carbon Metabolism to Nanoplastics with Different Surface Modifications

Recently, there is an increasing concern regarding the toxicity of nanoplastics (NPs) on freshwater organisms. However, knowledge about the potential impacts of NPs with different surface modification on freshwater biofilms is still very limited. In this research, biofilms were cultured in lab and exposed to nano polystyrene (PS) beads: non-functionalized PS NPs, PS-COOH NPs, and the carbon source utilization of biofilms were measured by BIOLOG ECO microplates. The results showed that both two types of PS NPs significantly reduced the total carbon metabolic activity of biofilms, compared with the controls, whereas the carbon metabolic rate increased notably, especially for the PS-COOH NPs treatments at day 14. Moreover, results from six categories of carbon sources analysis suggested that PS NPs with different surface chemical properties exhibit distinct effects on the carbon utilization of biofilms, and the divergent changes of the specific carbon source category were observed at day 21 from the two PS NPs treatments. In addition, the metabolic functional diversity of biofilms were not altered by the PS NPs treatments. These findings highlighted that chemical properties of NPs play an important role in the toxic effects on the carbon metabolism activities of the biofilms. This study offers new insights that nanoplastics of different chemical characteristics have the ability to affect the microbial-mediated carbon cycling process in aquatic ecosystems.

A review on the generation, discharge, distribution, environmental behavior, and toxicity (especially to microbial aggregates) of nano-TiO2 in sewage and surface-water and related research prospects

This article reviews the nano-effects and applications of different crystalline nano‑titanium dioxide (nano-TiO₂), identifies their discharge, distribution, behavior, and toxicity to aquatic organisms (focusing on microbial aggregates) in sewage and surface-water, summarizes related toxicity mechanisms, and critically proposes future perspectives. The results show that: 1) based on crystal type, application boundaries of nano-TiO₂ have become clear, extending from traditional manufacturing to high-tech fields; 2) concentration of nano-TiO₂ in water is as high as hundreds of thousands of μg/L (sewage) or several to dozens of μg/L (surface-water) due to direct application or indirect release; 3) water environmental behaviors of nano-TiO₂ are mainly controlled by hydration conditions and particle characteristics; 4) aquatic toxicities of nano-TiO₂ are closely related to their water environmental behavior, in which crystal type and tested species (such as single species and microbial aggregates) also play the key role. Going forward, the exploration of the toxicity mechanism will surely become a hot topic in the aquatic-toxicology of nano-TiO₂, because most of the research so far has focused on the responses of biological indicators (such as metabolism and damage), while little is known about the stress imprint caused by the crystal structures of nano-TiO₂ in water environments. Additionally, the aging of nano-TiO₂ in a water environment should be heeded to because the continuously changing surface structure is bound to have a significant impact on its behavior and toxicity. Moreover, for microbial aggregates, comprehensive response analysis should be conducted in terms of the functional activity, surface features, composition structure, internal microenvironment, cellular and molecular level changes, etc., to find the key point of the interaction between nano-TiO₂ and microbial aggregates, and to take mitigation or beneficial measures to deal with the aquatic-toxicity of nano-TiO₂. In short, this article contributes by 1) reviewing the research status of nano-TiO₂ in all aspects: application and discharge, distribution and behavior, and its aquatic toxicity; 2) suggesting the response mechanism of microbial aggregates and putting forward the toxigenic mechanism of nanomaterial structure; 3) pointing out the future research direction of nano-TiO₂ in water environment.

Chronic effects of cerium dioxide nanoparticles on biological nitrogen removal and nitrous oxide emission: Insight into impact mechanism and performance recovery potential

The influence of cerium dioxide nanoparticles (CeO₂ NPs) on biological nitrogen removal and associated nitrous oxide (N₂O) emission has seldom been addressed yet. Herein, the chronic effect of CeO₂ NPs on the nitrogen transformation processes during wastewater treatment and the impacted system's self-recovery potential after CeO₂ NP stress removal were investigated. CeO₂ NP of 10-50 mg/L induced significant declines of the ammonia nitrogen (NH₄⁺-N) and the total nitrogen removal efficiencies, but triggered the nitrite accumulation and the N₂O emission. The N₂O reductase (NOS) activity was negatively correlated with the N₂O emission level, and the inhibition of NOS activity under CeO₂ NP stress was probably due to the depressions of the sludge denitrifiers' metabolic activities. The NH₄⁺-N removal efficiency was successfully regained after the recovery period although the N₂O emission level was still higher than the pre-exposure period, which was probably due to the residual CeO₂ NPs inside the activated sludge.

The role of nanoparticles (titanium dioxide, graphene oxide) on the inactivation of co-existing bacteria in the presence and absence of quartz sand

The increased mass production and application of engineered nanomaterials (ENMs) have resulted in the release of nanoparticles (NPs) in the environment, raising uncertainties regarding their environmental impacts. This study examines the effect of graphene oxide (GO) and titanium dioxide (TiO₂) NPs on the inactivation of the three model bacteria originated by mammalians including humans: Escherichia (E.) coli, Enterococcus (E.) faecalis, and Staphylococcus (S.) aureus. A series of dynamic batch experiments were conducted at constant room temperature (22 °C) in order to examine the inactivation of co-existing bacteria by NPs, in the presence and absence of quartz sand. The inactivation experimental data were satisfactorily fitted with a pseudo-first order expression with a time dependent rate coefficient. The inactivation of E. coli and S. aureus was shown to increase in the co-presence of GO or TiO₂ NPs and quartz sand comparing with the presence of GO or TiO₂ NPs alone. For E. faecalis, no clear trend was observed. Moreover, quartz sand was shown to affect inactivation of bacteria by GO and TiO₂ NPs. Among the bacteria examined, the highest inactivation rates were observed for S. aureus.

A novel biotechnology based on periphytic biofilms with N-acyl-homoserine-lactones stimulation and lanthanum loading for phosphorus recovery

This study presents an approach for developing periphytic biofilm with N-acyl-homoserine-lactones (AHLs) stimulation and lanthanum (La, a rare earth element) loading, to achieve highly efficient and stable phosphorus (P) recovery from wastewater. AHLs stimulated biofilm growth and formation, also improved stable P entrapment by enhancing extracellular polymeric substance (EPS) production and optimizing P-entrapment bacterial communities. Periphytic biofilms loading La is based on ligand exchanges, and La loading achieved initial rapid P entrapment by surface adsorption. The combination of AHLs stimulation and La loading achieved 99.0% P entrapment. Interestingly, the enhanced EPS production stimulated by AHLs protected biofilms against La. Moreover, a method for P and La separately recovery from biofilms was developed, achieving 89-96% of P and 88-93% of La recovery. This study offers a promising biotechnology to reuse La from La-rich wastewater and recover P by biofilm doped with La, which results in a win-win situation for resource sustainability.

Pristine and sulfidized ZnO nanoparticles alter microbial community structure and nitrogen cycling in freshwater lakes

Zinc oxide nanoparticles (ZnO NPs) and its sulfidized form (ZnS NPs) are increasingly entering into freshwater systems through multiple pathways. However, their impacts on the composition and function of sedimentary microbial communities are still largely unknown. Here, two kinds of lake-derived microcosms were constructed and incubated with ZnO NPs, or ZnS NPs to investigate the short-term (7 days) and long-term (50 days) impacts on sedimentary microbial communities and nitrogen cycling. After 7 days, both ZnO NPs and ZnS NPs dosed microbial communities experienced distinct alterations as compared to the undosed controls. By day 50, the structural shifts of microbial communities caused by ZnO NPs were significantly enlarged, while the microbial shifts induced by ZnS NPs were largely resolved. Additionally, ZnO NPs and ZnS NPs could significantly alter nitrogen species and nitrogen cycling genes in sediments, revealing their non-negligible impacts on nitrogen cycling processes. Furthermore, our data clearly indicated that the impacts of ZnO NPs and ZnS NPs on nitrogen cycling differed distinctly in different lake-derived microcosms, and the impacts were significantly correlated with microbial community structure. Overall, this research suggests that the entrance of pristine or sulfidized ZnO NPs into freshwater systems may significantly impact the sedimentary microbial community structure and nitrogen cycling.

Recovery of Iron-Dependent Autotrophic Denitrification Activity from Cell-Iron Mineral Aggregation-Induced Reversible Inhibition by Low-Intensity Ultrasonication

Iron-dependent autotrophic denitrification (IDAD) has garnered increasing interests as an efficient method for removing nitrogen from wastewater with a low carbon to nitrogen ratio. However, an inevitable deterioration of IDAD performance casts a shadow over its further development. In this work, the hidden cause for such a deterioration is uncovered, and a viable solution to this problem is provided. Batch test results reveal that the aggregation of microbial cells and iron-bearing minerals induced a cumulative and reversible inhibition on the activity of IDAD sludge. Extracellular polymeric substances were found to play a glue-like role in the cell-iron mineral aggregates, where microbial cells were caged, and their metabolisms were suppressed. Adopting low-intensity ultrasound treatment efficiently restored the IDAD activity by disintegrating such aggregates rather than stimulating the microbial metabolism. Moreover, the ultrasonication-assisted IDAD bioreactor exhibited an advantageous nitrogen removal efficiency (with a maximum enhancement of 72.3%) and operational stability compared to the control one, demonstrating a feasible strategy to achieve long-term stability of the IDAD process. Overall, this work provides a better understanding about the mechanism for the performance deterioration and a simple approach to maintain the stability of IDAD.

Recovery profile of anaerobic ammonium oxidation (anammox) bacteria inhibited by ZnO nanoparticles

The potential effects of nanoparticles (NPs) on biological treatment processes have become significant due to their increasing industrial applications. The purpose of this research was to investigate the self-recovery ability of anammox bacteria following acute ZnO NPs toxicity. In this context, a 2-liter lab-scale anammox reactor was operated for 550 days to enrich the biomass required to the batch exposure tests. Anammox culture was firstly exposed to four different doses of ZnO NPs (50, 75, 100 and 200 mg/L) for 24 h. Then, the ZnO NPs were removed and self-recovery performance of the anammox bacteria was assessed by evaluating the nitrogen removal capacities for 72 h. Besides the nitrogen removal performance, extracellular polymeric substances (EPS) production was also detected to deeply understand the response of the enriched anammox culture against ZnO NPs exposure. The results revealed that sudden and high load of ZnO NPs (100 and 200 mg/L) resulted in persistent impairment to the nitrogen removal performance of the enriched anammox culture. However, relatively lower doses (50 and 75 mg/L) caused deceleration of the nitrogen removal performance during the recovery period. In addition, EPS content in the reactor decreased along with escalating load of ZnO NPs.

Phosphorus elevation erodes ectomycorrhizal community diversity and induces divergence of saprophytic community composition between vegetation types

Phosphorus (P) is a critical macronutrient that is essential for many life-sustaining processes. Despite decades of work on plant performance under P deficiency and the importance of microbes in ecosystem processes, little is known about how bacterial and fungal flora respond to P gradients and determine the vegetation health. In current study, we examined soil edaphic conditions and microbial communities in 39 untouched natural forests representing phosphorous deficient (Pp) and phosphorus rich (Pr) soils (due to naturally occurring phosphate rocks) in Yunnan Province, China. We also considered the effect of plant functional types by including the dominant tree species. Bacterial and fungal diversity was greater across the Pp sites compared with Pr sites. The relative abundance of Actinobacteria and Gemmatimonadetes was higher across Pp sites, while Chlamydiae and Verrucomicrobia showed the opposite pattern, with greater relative abundance across the Pr sites. Bacterial taxa that were observed in low P soils were more likely having oligotrophic life history strategies. Interestingly, ectomycorrhizal (ECM) fungal diversity was promoted in the Pp sites, indicating that the decreasing soil P concentration and the increasing host P demand foster stimulated the ECM species for hyphal soil exploration. Moreover, the high P level caused saprophytic fungi (SAP) to diverge, causing its enrichment only under Q. variabilis compared to low P soil, where there is no difference in relative abundance of SAP between the two tree species. This likely resulted in an enhanced decomposition process by SAP and elevation of soil properties (Carbon and Nitrogen) under Q. variabilis across the Pr sites. Taken together, our findings highlight the highly diverse microbiome in low P soils. The higher soil P caused shifts of fungal functional guilds, which likely influence tree growth and health (ECM), along with divergence of ecosystem services between tree functional types.

Triclosan weakens the nitrification process of activated sludge and increases the risk of the spread of antibiotic resistance genes

The usage of triclosan (TCS) may rise rapidly due to the COVID-19 pandemic. TCS usually sinks in the activated sludge. However, the effects of TCS in activated sludge remain largely unknown. The changes in nitrogen cycles and the abundances of antibiotic resistance genes (ARGs) caused by TCS were investigated in this study. The addition of 1000 μg/L TCS significantly inhibited nitrification since the ammonia conversion rate and the abundance of nitrification functional genes decreased by 12.14%. The other nitrogen cycle genes involved in nitrogen fixation and denitrification were also suppressed. The microbial community shifted towards tolerance and degradation of phenols. The addition of 100 μg/L TCS remarkably increased the total abundance of ARGs and mobile genetic elements by 33.1%, and notably, the tetracycline and multidrug resistance genes increased by 54.75% and 103.42%, respectively. The co-occurrence network revealed that Flavobacterium might have played a key role in the spread of ARGs. The abundance of this genus increased 92-fold under the addition of 1000 μg/L TCS, indicating that Flavobacterium is potent in the tolerance and degradation of TCS. This work would help to better understand the effects of TCS in activated sludge and provide comprehensive insight into TCS management during the pandemic era.

Feedback mechanisms of periphytic biofilms to ZnO nanoparticles toxicity at different phosphorus levels

The increasing use of nanoparticles (NPs) has raised concerns about their potential environmental risks. Many researches on NPs focused on the toxicity mechanism to microorganisms, but neglect the toxicity effects in relation to nutritional conditions. Here, we evaluated the interactive effects of zinc oxide (ZnO) NPs and phosphorus (P) levels on the bacterial community and functioning of periphytic biofilms. Results showed that long-term exposure to ZnO NPs significantly reduced alkaline phosphatase activity (APA) of periphytic biofilms just in P-limited conditions. Co-occurrence network analysis indicated that ZnO NPs exposure reduced network complexity between bacterial taxa in P-limited conditions, while the opposite trend was observed in P-replete conditions. Correlation analysis and random forest modeling suggested that excessive Zn²⁺ released and high reactive oxygen species (ROS) production might be mainly responsible for the inhibition of APA induced by ZnO NPs under P-limited conditions, while adjustment of bacterial diversity and improvement of keystone taxa cooperation were the main mechanisms in maintaining APA when subjected to weak toxicity of ZnO NPs in P-replete conditions. Taken together, our results provide insights into the biological feedback mechanism involved in ZnO NPs exposure on the ecological function of periphytic biofilms in different P nutritional conditions.