Can filamentous fungi form biofilms?

Overlooked Role of Fungi in Drinking Water Taste and Odor Issues

Taste and odor (T&O) are among the most frequently encountered aesthetic issues in drinking water. While fungi have been reported to produce offensive odors, their contribution to T&O in drinking water remains understudied and often overlooked. In this study, the profiles of fungal community and odorants produced by 10 native fungal isolates were investigated in 36 samples collected from two drinking water treatment plants and a premise plumbing system. A total of 17 odorants were identified with Penicillium, Aspergillus, Paecilomyces, and Alternaria genera exhibiting the highest odorant yields. Significant concentrations of musty/earthy compounds were produced by these fungal isolates, such as 2-methylisoborneol (2-MIB) (26-256 ng/L), geosmin (10-13 ng/L), and 2-isobutyl-3-methoxy-pyrazine (IBMP) (3-13 ng/L). The high odor activity value of the odorants primarily occurred within 4 d, while toxicity continued to increase during the 8 d incubation. UV treatment in premise plumbing significantly (p < 0.05) reduced the gene read counts of Ascomycota phylum, Aspergillus spp., Fusarium spp., Rhizopus spp., and Trichoderma spp., by 2.3-4.0 times. These findings underscore the previously underestimated role of fungi in contributing to T&O issues in drinking water and corresponding risks to consumers and indicate UV as a promising strategy for fungal control in drinking water.

Investigating the Impact of Flavonoids on Aspergillus flavus: Insights into Cell Wall Damage and Biofilms

Aspergillus flavus, a fungus known for producing aflatoxins, poses significant threats to agriculture and global health. Flavonoids, plant-derived compounds, inhibit A. flavus proliferation and mitigate aflatoxin production, although the precise molecular and physical mechanisms underlying these effects remain poorly understood. In this study, we investigated three flavonoids-apigenin, luteolin, and quercetin-applied to A. flavus NRRL 3357. We determined the following: (1) glycosylated luteolin led to a 10% reduction in maximum fungal growth capacity; (2) quercetin affected cell wall integrity by triggering extreme mycelial collapse, while apigenin and luteolin caused peeling of the outer layer of cell wall; (3) luteolin exhibited the highest antioxidant capacity in the environment compared to apigenin and quercetin; (4) osmotic stress assays did not reveal morphological defects; (5) flavonoids promoted cell adherence, a precursor for biofilm formation; and (6) RNA sequencing analysis revealed that flavonoids impact expression of putative cell wall and plasma membrane biosynthesis genes. Our findings suggest that the differential effects of quercetin, luteolin, and apigenin on membrane integrity and biofilm formation may be driven by their interactions with fungal cell walls. These insights may inform the development of novel antifungal additives or plant breeding strategies focusing on plant-derived compounds in crop protection.

Enhanced inactivation of Aspergillus niger biofilms by the combination of UV-LEDs with chlorine-based disinfectants

The presence of pathogenic fungal biofilms in drinking water distribution systems poses significant challenges in maintaining the safety of drinking water. This research delved into the formation of Aspergillus niger (A. niger) biofilms and evaluated their susceptibility to inactivation using combinations of ultraviolet light emitting diodes (UV-LEDs) with chlorine-based disinfectants, including UV-LEDs/chlorine (Cl2), UV-LEDs/chlorine dioxide (ClO2), and UV-LEDs/chloramine (NH2Cl) at 265 nm, 280 nm and 265/280 nm. Results indicated that A. niger biofilms reached initial maturity within 24 h, with matured three-dimensional filamentous structures and conidiospores by 96 h. UV-LEDs combined with chlorine-based disinfectants enhanced A. niger biofilm inactivation compared to UV-LEDs alone and low-pressure UV combined with chlorine-based disinfectants. At an UV fluence of 400 mJ/cm2, log reductions of UV265, UV280, and UV265/280 combined with chlorine-based disinfectants were 2.95-fold, 3.20-fold, and 2.38-fold higher than that of UV265, UV280, and UV265/280, respectively. During the inactivation, A. niger biofilm cells experienced increased membrane permeability and intracellular reactive oxygen species levels, resulting in cellular apoptosis. Extracellular polymeric substances contributed to the higher resistance of biofilms. Regarding electrical energy consumption, the order was: UV-LEDs/ClO2 > UV-LEDs/NH2Cl > UV-LEDs/Cl2. These findings provide insights into the effective utilization of UV-LEDs for fungal biofilm disinfection.

Formation of filamentous fungal biofilms in water and the transformation of resistance to chlor(am)ine disinfection

Biofilms are composed of complex multi-species in nature, potentially threatening drinking water safety. In this work, the formation of single- and multi-species fungal biofilms formed by Aspergillus niger (A. niger) and Aspergillus flavus (A. flavus), and the inactivation of mature biofilms using chlor(am)ine were firstly investigated. Results revealed that the antagonistic interaction occurred between A. niger and A. flavus. Chloramination at 20 mg/L for 30 min achieved 74.74 % and 76.04 % inactivation of A. flavus and multi-species biofilm, which were 1.69- and 1.84-fold higher than that of chlorine at the same condition. However, no significant difference was observed in the inactivation of A. niger biofilm between chlorine and monochloramine disinfection due to the lower amount of extracellular polymeric substance produced by it (p > 0.05). The inactivation of biofilm by monochloramine fitted the Weibull model well. According to the Weibull model, the monochloramine resistance of biofilm were as follows: A. flavus > multi-species > A. niger biofilm. Besides, an increase in reactive oxygen levels, damage of cell membrane, and leakage of intracellular substances in biofilms were observed after chlor(am)ination. More intracellular polysaccharides and proteins were leaked in chloramination inactivation (p < 0.05). This study provides important implications for controlling fungal biofilm.

Biodegradation of low-density polyethylene by mixed fungi composed of Alternaria sp. and Trametes sp. isolated from landfill sites

With the development of industry and modern manufacturing, nondegradable low-density polyethylene (LDPE) has been widely used, posing a rising environmental hazard to natural ecosystems and public health. In this study, we isolated a series of LDPE-degrading fungi from landfill sites and carried out LDPE degradation experiments by combining highly efficient degrading fungi in pairs. The results showed that the mixed microorganisms composed of Alternaria sp. CPEF-1 and Trametes sp. PE2F-4 (H-3 group) had a greater degradation effect on heat-treated LDPE (T-LDPE). After 30 days of inoculation with combination strain H-3, the weight loss rate of the T-LDPE film was approximately 154% higher than that of the untreated LDPE (U-LDPE) film, and the weight loss rate reached 0.66 ± 0.06%. Environmental scanning electron microscopy (ESEM) and Fourier transform infrared spectroscopy (FTIR) were used to further investigate the biodegradation impacts of T-LDPE, including the changes on the surface and depolymerization of the LDPE films during the fungal degradation process. Our findings revealed that the combined fungal treatment is more effective at degrading T-LDPE than the single strain treatment, and it is expected that properly altering the composition of the microbial community can help lessen the detrimental impact of plastics on the environment.

Life on a leaf: the epiphyte to pathogen continuum and interplay in the phyllosphere

Epiphytic microbes are those that live for some or all of their life cycle on the surface of plant leaves. Leaf surfaces are a topologically complex, physicochemically heterogeneous habitat that is home to extensive, mixed communities of resident and transient inhabitants from all three domains of life. In this review, we discuss the origins of leaf surface microbes and how different biotic and abiotic factors shape their communities. We discuss the leaf surface as a habitat and microbial adaptations which allow some species to thrive there, with particular emphasis on microbes that occupy the continuum between epiphytic specialists and phytopathogens, groups which have considerable overlap in terms of adapting to the leaf surface and between which a single virulence determinant can move a microbial strain. Finally, we discuss the recent findings that the wheat pathogenic fungus Zymoseptoria tritici spends a considerable amount of time on the leaf surface, and ask what insights other epiphytic organisms might provide into this pathogen, as well as how Z. tritici might serve as a model system for investigating plant-microbe-microbe interactions on the leaf surface.

Tapping into fungal potential: Biodegradation of plastic and rubber by potent Fungi

Plastic polymers are present in most aspects of routine daily life. Their increasing leakage into the environment poses a threat to environmental, animal, and human health. These polymers are often resistant to microbial degradation and are predicted to remain in the environment for tens to hundreds of years. Fungi have been shown to degrade complex polymers and are considered good candidates for bioremediation (biological pollutant reduction) of plastics. Therefore, we screened 18 selected fungal strains for their ability to degrade polyurethane (PU), polyethylene (PE), and tire rubber. As a proxy for plastic polymer mineralization, we quantified O2 consumption and CO2 production in an enclosed biodegradation system providing plastic as the sole carbon source. In contrast to most studies we demonstrated that the tested fungi attach to, and colonize the different plastic polymers without any pretreatment of the plastics and in the absence of sugars, which were suggested essential for priming the degradation process. Functional polymer groups identified by Fourier-transform infrared spectroscopy (FTIR), and changes in fungal morphology as seen in light and scanning electron microscopy (SEM) were used as indicators of fungal adaptation to growth on PU as a substrate. Thereby, SEM analysis revealed new morphological structures and deformation of the cell wall of several fungal strains when colonizing PU and utilizing this plastic polymer for cell growth. Strains of Fusarium, Penicillium, Botryotinia cinerea EN41, and Trichoderma demonstrated a high potential to degrade PU, rubber, and PE. Growing on PU, over 90 % of the O2 was consumed in <14 days with 300-500 ppm of CO2 generated in parallel. Our study highlights a high bioremediation potential of some fungal strains to efficiently degrade plastic polymers, largely dependent on plastic type.

Fungal biofilm formation and its regulatory mechanism

Fungal biofilm is a microbial community composed of fungal cells and extracellular polymeric substances (EPS). In recent years, fungal biofilms have played an increasingly important role in many fields. However, there are few studies on fungal biofilms and their related applications and development are still far from enough. Therefore, this review summarizes the composition and function of EPS in fungal biofilms, and improves and refines the formation process of fungal biofilms according to the latest viewpoints. Moreover, based on the study of Saccharomyces cerevisiae and Candida albicans, this review summarizes the gene regulation network of fungal biofilm synthesis, which is crucial for systematically understanding the molecular mechanism of fungal biofilm formation. It is of great significance to further develop effective methods at the molecular level to control harmful biofilms or enhance and regulate the formation of beneficial biofilms. Finally, the quorum sensing factors and mixed biofilms formed by fungi in the current research of fungal biofilms are summarized. These results will help to deepen the understanding of the formation process and internal regulation mechanism of fungal biofilm, provide reference for the study of EPS composition and structure, formation, regulation, group behavior and mixed biofilm formation of other fungal biofilms, and provide strategies and theoretical basis for the control, development and utilization of fungal biofilms.

Myco-remediation of plastic pollution: current knowledge and future prospects

To date, enumerable fungi have been reported to participate in the biodegradation of several notorious plastic materials following their isolation from soil of plastic-dumping sites, marine water, waste of mulch films, landfills, plant parts and gut of wax moth. The general mechanism begins with formation of hydrophobin and biofilm proceding to secretion of specific plastic degarding enzymes (peroxidase, hydrolase, protease and urease), penetration of three dimensional substrates and mineralization of plastic polymers into harmless products. As a result, several synthetic polymers including polyethylene, polystyrene, polypropylene, polyvinyl chloride, polyurethane and/or bio-degradable plastics have been validated to deteriorate within months through the action of a wide variety of fungal strains predominantly Ascomycota (Alternaria, Aspergillus, Cladosporium, Fusarium, Penicillium spp.). Understanding the potential and mode of operation of these organisms is thus of prime importance inspiring us to furnish an up to date view on all the presently known fungal strains claimed to mitigate the plastic waste problem. Future research henceforth needs to be directed towards metagenomic approach to distinguish polymer degrading microbial diversity followed by bio-augmentation to build fascinating future of waste disposal.

The aggregation characteristics of Aspergillus spores under various conditions and the impact on LPUV inactivation: Comparisons with chlorine-based disinfection

Aggregation is the primary step prior to fungal biofilm development. Understanding the attributes of aggregation is of great significance to better control the emergence of waterborne fungi. In this study, the aggregation of Aspergills spores (A. flavus and A. fumigatus) under various salt, culture medium, and humic acid (HA) conditions was investigated for the first time, and the inactivation via low-pressure ultraviolet (LPUV) upon aggregated Aspergillus spores was also presented. The aggregation efficiency and size of aggregates increased over time and at low salt (NaCl and CaCl2) concentration (10 mM) while decreasing with the continuous increase of salt concentration (100 and 200 mM). Increasing the concentration of culture medium and HA promoted the aggregation of fungal spores. Spores became hydrated, swelled, and secreted more viscous substances during the growth period, which accelerated the aggregation process. Results also suggested that fungal spores aggregated more easily in actual water, posing a high risk of biohazard in real-life scenarios. Inactivation efficiency by LPUV decreased with higher aggregation degrees due to the protection from the damaged spores on the outer layer and the shielding of pigments in the cell wall. Compared to chlorine-based disinfection, the aggregation resulted in the extension of shoulder length yet neglectable change of inactivation rate constant under LPUV treatment. Further investigation of cell membrane integrity and intracellular reactive oxygen species was conducted to elucidate the difference in mechanisms between various techniques. This study provides insight into the understanding and controlling of the aggregation of fungal spores.

Impact of multiscale surface topography characteristics on Candida albicans biofilm formation: From cell repellence to fungicidal activity

While there has been significant research conducted on bacterial colonization on implant materials, with a focus on developing surface modifications to prevent the formation of bacterial biofilms, the study of Candida albicans biofilms on implantable materials is still in its infancy, despite its growing relevance in implant-associated infections. C. albicans fungal infections represent a significant clinical concern due to their severity and associated high fatality rate. Pathogenic yeasts account for an increasing proportion of implant-associated infections, since Candida spp. readily form biofilms on medical and dental device surfaces. In addition, these biofilms are highly antifungal-resistant, making it crucial to explore alternative solutions for the prevention of Candida implant-associated infections. One promising approach is to modify the surface properties of the implant, such as the wettability and topography of these substrata, to prevent the initial Candida attachment to the surface. This review summarizes recent research on the effects of surface wettability, roughness, and architecture on Candida spp. attachment to implantable materials. The nanofabrication of material surfaces are highlighted as a potential method for the prevention of Candida spp. attachment and biofilm formation on medical implant materials. Understanding the mechanisms by which Candida spp. attach to surfaces will allow such surfaces to be designed such that the incidence and severity of Candida infections in patients can be significantly reduced. Most importantly, this approach could also substantially reduce the need to use antifungals for the prevention and treatment of these infections, thereby playing a crucial role in minimizing the possibility contributing to instances of antimicrobial resistance. STATEMENT OF SIGNIFICANCE: In this review we provide a systematic analysis of the role that surface characteristics, such as wettability, roughness, topography and architecture, play on the extent of C. albicans cells attachment that will occur on biomaterial surfaces. We show that exploiting bioinspired surfaces could significantly contribute to the prevention of antimicrobial resistance to antifungal and chemical-based preventive measures. By reducing the attachment and growth of C. albicans cells using surface structure approaches, we can decrease the need for antifungals, which are conventionally used to treat such infections.

Role of Metal-Organic Frameworks (MOFs) in treating and diagnosing microbial infections

This review article highlights the innovative role of metal-organic frameworks (MOFs) in addressing global healthcare challenges related to microbial infections. MOFs, comprised of metal nodes and organic ligands, offer unique properties that can be applied in the treatment and diagnosis of these infections. Traditional methods, such as antibiotics and conventional diagnostics, face issues such as antibiotic resistance and diagnostic limitations. MOFs, with their highly porous and customizable structure, can encapsulate and deliver therapeutic or diagnostic molecules precisely. Their large surface area and customizable pore structures allow for sensitive detection and selective recognition of microbial pathogens. They also show potential in delivering therapeutic agents to infection sites, enabling controlled release and possible synergistic effects. However, challenges like optimizing synthesis techniques, enhancing stability, and developing targeted delivery systems remain. Regulatory and safety considerations for clinical translation also need to be addressed. This review not only explores the potential of MOFs in treating and diagnosing microbial infections but also emphasizes their unique approach and discusses existing challenges and future directions.

The improved resistance of germinated spores to ultraviolet irradiation: Comparison with chlorine

Fungi outbreaks in water will include a series of processes, including spore aggregation, germination, biofilm, and finally present in a mixed state in the aquatic environment. More attention is paid to the control of dispersed fungal spores, however, there was little knowledge of the control of germinated spores. This study investigated the inactivation kinetics and mechanism of ultraviolet (UV) treatment for fungal spores with different germination percentages compared with dormant spores. The results indicated that the inactivation rate constants (k) of spores with 5%-45% germination were 0.0278-0.0299 cm2/mJ for Aspergillus niger and 0.0588-0.0647 cm2/mJ for Penicillium polonicum, which were lower than those of dormant spores. It suggested that germinated spores were more tolerant to UV irradiation than dormant spores, and it may be due to the defensive barrier (upregulated pigments) and some reductive substance (upregulated enoyl reductase) by absorbing UV or reacting with reactive oxygen species according to transcriptome analysis. Compared to dormant spores, the k-UV of germinated spores decreased by 18.17%-26.56% for Aspergillus niger, which was less than k-chlorine (62.33%-69.74%). A slighter decrease in k-UV showed UV irradiation can efficiently control fungi contamination, especially when dormant spores and germinated spores coexisted in actual water systems. This study indicates that more attention should be paid to germinated spores.

Differential fungal assemblages and functions between the plastisphere of biodegradable and conventional microplastics in farmland

The heterogeneity of plastisphere and soil can lead to variation in microbiome, potentially impacting soil functions. Current studies of the plastisphere have mainly focused on bacterial communities, and fungal communities are poorly understood. Biodegradable and conventional microplastics may recruit specific microbial taxa due to their different biodegradability. Herein, we collected polyethylene (PE) and polybutylene adipate terephthalate/polylactide (PBAT/PLA) microplastics in farmland (Hebei, China) and characterized the fungal community in PE and PBAT/PLA plastisphere. Results from high-throughput sequencing showed significantly lower alpha diversity and distinct composition of fungal community in PBAT/PLA plastisphere compared to PE plastisphere. Additionally, the PBAT/PLA plastisphere demonstrated a significant enrichment of fungal taxa with potential plastic-degrading capability such as Nectriaceae, Pleosporaceae and Didymellaceae. The stochasticity of drift (28.7-43.5 %) and dispersal limitation (38.6-39.4 %) were dominant in the assembly of PE and PBAT/PLA plastisphere fungal community. Higher stable and more complex network in PBAT/PLA plastispheres were observed as compared to PE plastisphere. Besides, the total relative abundance of plant and animal pathogens were higher in PBAT/PLA plastisphere than that in PE plastisphere, suggesting that biodegradable microplastics may pose a higher threat to soil health. This study contributes to our understanding of the characteristics of plastisphere fungal communities in soil environments and the associated risks to terrestrial ecosystems resulting from microplastic accumulation.

Unraveling bacterial and eukaryotic communities in secondary water supply systems: Dynamics, assembly, and health implications

Secondary water supply systems (SWSSs) are crucial water supply infrastructures for high-rise buildings in metropolitan cities. In recent years, they have garnered public attention due to increased microbial risks. However, our understanding of SWSS microbial ecology, particularly concerning the composition of eukaryotes and the underlying mechanisms driving microbial dynamics and assembly in SWSSs, remains elusive. Herein, we conducted a comprehensive investigation on both eukaryotes and bacteria along the water transportation pathway and across various microbial habitats (water, biofilm, and sediment) in SWSSs. Sequencing results revealed that eukaryotes within SWSSs predominantly consist of protists (average abundance: 31.23%) and metazoans (20.91%), while amoebae accounted for 4.71% of the total. During water transportation from the distribution mains to taps, both bacterial and eukaryotic communities exhibited significant community shifts, and higher degrees of variation were observed for eukaryotic community among different locations within SWSSs. The normalized stochasticity ratio (NST) analysis demonstrated that bacterial community assembly was governed by stochastic processes, while eukaryotic community assembly was primarily shaped by deterministic processes. Within SWSS tanks, bacterial communities significantly varied across water, biofilm, and sediment, whereas eukaryotic communities showed minor differences among these habitats. The co-occurrence networks analysis revealed that tank biofilm and sediment harbored more eukaryote-bacterium linkages than water, suggesting biofilm and sediment might be hotspots for inter-kingdom interactions. We also applied FEAST analysis to track the source of tap water microbiota, results of which showed that household-tap bacteria mainly originated from tank water. In contrast, tank biofilm was identified as the primary microbial source to eukaryotes in household tap water. Additionally, engineering factors such as tank materials significantly affected amoeba community, and the SWSS configuration was found to influence Legionella and Mycobacterium abundances in SWSSs. Overall, results of our study shed light on the microbial ecology in SWSS and provide insights into SWSS management and health risk control.

Recent advances in fungal xenobiotic metabolism: enzymes and applications

Fungi have been extensively studied for their capacity to biotransform a wide range of natural and xenobiotic compounds. This versatility is a reflection of the broad substrate specificity of fungal enzymes such as laccases, peroxidases and cytochromes P450, which are involved in these reactions. This review gives an account of recent advances in the understanding of fungal metabolism of drugs and pollutants such as dyes, agrochemicals and per- and poly-fluorinated alkyl substances (PFAS), and describes the key enzymes involved in xenobiotic biotransformation. The potential of fungi and their enzymes in the bioremediation of polluted environments and in the biocatalytic production of important compounds is also discussed.

Plastic pollution and fungal, protozoan, and helminth pathogens - A neglected environmental and public health issue?

Plastic waste is ubiquitous in the environment and can become colonised by distinct microbial biofilm communities, known collectively as the 'plastisphere.' The plastisphere can facilitate the increased survival and dissemination of human pathogenic prokaryotes (e.g., bacteria); however, our understanding of the potential for plastics to harbour and disseminate eukaryotic pathogens is lacking. Eukaryotic microorganisms are abundant in natural environments and represent some of the most important disease-causing agents, collectively responsible for tens of millions of infections, and millions of deaths worldwide. While prokaryotic plastisphere communities in terrestrial, freshwater, and marine environments are relatively well characterised, such biofilms will also contain eukaryotic species. Here, we critically review the potential for fungal, protozoan, and helminth pathogens to associate with the plastisphere, and consider the regulation and mechanisms of this interaction. As the volume of plastics in the environment continues to rise there is an urgent need to understand the role of the plastisphere for the survival, virulence, dissemination, and transfer of eukaryotic pathogens, and the effect this can have on environmental and human health.

Insights into the mechanisms involved in the fungal degradation of plastics

Fungi are considered among the most efficient microbial degraders of plastics, as they produce salient enzymes and can survive on recalcitrant compounds with limited nutrients. In recent years, studies have reported numerous species of fungi that can degrade different types of plastics, yet there remain many gaps in our understanding of the processes involved in biodegradation. In addition, many unknowns need to be resolved regarding the fungal enzymes responsible for plastic fragmentation and the regulatory mechanisms which fungi use to hydrolyse, assimilate and mineralize synthetic plastics. This review aims to detail the main methods used in plastic hydrolysis by fungi, key enzymatic and molecular mechanisms, chemical agents that enhance the enzymatic breakdown of plastics, and viable industrial applications. Considering that polymers such as lignin, bioplastics, phenolics, and other petroleum-based compounds exhibit closely related characteristics in terms of hydrophobicity and structure, and are degraded by similar fungal enzymes as plastics, we have reasoned that genes that have been reported to regulate the biodegradation of these compounds or their homologs could equally be involved in the regulation of plastic degrading enzymes in fungi. Thus, this review highlights and provides insight into some of the most likely regulatory mechanisms by which fungi degrade plastics, target enzymes, genes, and transcription factors involved in the process, as well as key limitations to industrial upscaling of plastic biodegradation and biological approaches that can be employed to overcome these challenges.

Cell dispersion during biofilm formation by Scedosporium apiospermum, Scedosporium aurantiacum, Scedosporium minutisporum and Lomentospora prolificans

Dispersion is an essential step in the lifecycle of biofilms, since it enables the dissemination of microbial cells and, consequently, the potential colonization of new sites. Filamentous fungi belonging to the Scedosporium/Lomentospora genera are opportunistic human pathogens able to form multidrug-resistant biofilms on surfaces of different chemical compositions, environments and nutritional conditions. Despite the rising understanding of how biofilms are formed by Scedosporium/Lomentospora species, the cell dispersal step has not yet been explored. In the present study, the cell dispersion was investigated during biofilm formation by S. apiospermum, S. minutisporum, S. aurantiacum and L. prolificans cells. The results revealed that conidia were the major type of dispersed cells, which were detected throughout biofilm development (from 24 to 72 h). Dispersion was not influenced by increased glucose concentration (the main source for energetic metabolism) neither the presence of voriconazole (the most common antifungal used to treat scedosporiosis); however, the presence of mucin (a component of mucous, present in the lungs of cystic fibrosis patients, who are usually affected by these filamentous fungi) triggered cell dispersion. Contrarily, a poor nutritional environment (e.g., phosphate-buffered saline) inhibited this step. Overall, our study reveals new insights into the biofilm development of Scedosporium/Lomentospora species.

Candida auris biofilm: a review on model to mechanism conservation

INTRODUCTION

Candida auris is included in the fungal infection category 'critical' by WHO because of associated high drug tolerance and spread at an alarming rate which if remains untouched may result in serious outbreaks. Since its discovery in 2009, several assiduous efforts by mycologists across the world have deciphered its biology including growth physiology, drug tolerance, biofilm formation, etc. The differential response of various strains from different clades poses a hurdle in drawing a final conclusion.

AREAS COVERED

This review provides brief insights into the understanding of C. auris biofilm. It includes information on various models developed to understand the biofilms and conservation of different signaling pathways. Significant development has been made in the recent past with the generation of relevant in vivo and ex vivo models. The role of signaling pathways in the development of biofilm is largely unknown.

EXPERT OPINION

The selection of an appropriate model system is a must for the accuracy and reproducibility of results. The conservation of major signaling pathways in C. auris with respect to C. albicans and S. cerevisiae highlights that initial inputs acquired from orthologs will be valuable in getting insights into the mechanism of biofilm formation and associated pathogenesis.

Occurrence and control of fungi in water: New challenges in biological risk and safety assurance

Recently, the contamination of fungi in water has aroused widespread concern, which will pose a threat to water quality and safety, and raise diseases risk in the immunocompromised individuals. In this review, the characteristics and different physiological state of fungi in water are summarized. A comprehensive evaluation of the control efficiency and mechanism of waterborne fungi by the commonly used disinfection methods is provided as well. During the disinfection processes of chlorine, chlorine dioxide, chloramine and advanced disinfection processes (ADPs) such as O₃-based ADPs and UV-based ADPs, the fungal spores firstly lost their culturability, followed by membrane integrity, and the intracellular reactive oxygen species level increased at the same time, eventually the fungal spores were completely inactivated. The security strategies of drinking water against the contamination of fungi are also discussed in terms of water sources, water treatment plants and pipe network. Finally, future researches need to be explored are proposed: the rapid detection methods, the production laws and control of mycotoxin, and the outbreak conditions of fungi in water. Specifically, exploring efficient, safe and economical technologies, especially ADPs, is still the main direction in the disinfection of fungi in future studies. This review can offer a comprehensive understanding on the occurrence and control of fungi in water to fill the knowledge gap and provide guidance for the future research.

Differential Susceptibility of Mixed Polymicrobial Biofilms Involving Ocular Coccoid Bacteria (Staphylococcus aureus and S. epidermidis) and a Filamentous Fungus (Fusarium solani) on Ex Vivo Human Corneas

Biofilms confer several advantages to the organisms associated with them, such as increased resistances to antibacterial and antifungal compounds compared to free living cells. Compared to monomicrobial biofilms involving a single microorganism, biofilms composed of microorganisms affiliated to bacterial and fungal kingdoms are predominant in nature. Despite the predominance of polymicrobial biofilms, and more so mixed polymicrobial biofilms, they are rarely studied. The objective of the current study is to evaluate the potential of ocular bacteria and a filamentous fungus to form monomicrobial and mixed polymicrobial biofilms on synthetic and natural substrates and to monitor their response to antibiotics. In this sense, we demonstrated that the ocular pathogens Staphylococcus aureus, S. epidermidis, and Fusarium solani form monomicrobial and mixed polymicrobial biofilms both on tissue culture polystyrene plates and on ex vivo human corneas from cadavers using confocal microscopy and scanning electron microscopy. Additionally, the mixed polymicrobial biofilms involving the above ocular bacteria and a filamentous fungus were less susceptible to different antibacterials and antifungals in relation to the corresponding control planktonic cells. Further, the MICs to the screened antibacterials and antifungals in polymicrobial biofilms involving a bacterium or a fungus was either increased, decreased, or unchanged compared to the corresponding individual bacterial or fungal biofilm. The results would be useful to the ophthalmologist to plan effective treatment regimens for the eye since these are common pathogens of the eye causing keratitis, endophthalmitis, conjunctivitis, etc.

Detection of microscopic filamentous fungal biofilms - Choosing the suitable methodology

Microscopic filamentous fungi are ubiquitous microorganisms that adapt very easily to a variety of environmental conditions. Due to this adaptability, they can colonize a number of various surfaces where they are able to start forming biofilms. Life in the form of biofilms provides them with many benefits (increased resistance to desiccation, UV radiation, antimicrobial compounds, and host immune response). The aim of this study is to find a reliable and reproducible methodology to determine biofilm growth of selected microscopic filamentous fungi strains. Several methods (crystal violet staining, MTT assay, XTT assay, resazurin assay) for the determination of total biofilm biomass and its metabolic activity were tested on four fungi - Alternaria alternata, Aspergillus niger, Fusarium culmorum and Fusarium graminearum, and their biofilm was also imaged by spinning disc confocal microscopy using fluorescent dyes. A reproducible biofilm quantification method is essential for the subsequent testing of the biofilm growth suppression using antifungal agents or physical methods. Crystal violet staining was found to be a suitable method for the determination of total biofilm biomass of selected strains, and the MTT assay for the determination of metabolic activity of the biofilms. Calcofluor white and Nile red fluorescent stains successfully dyed the hyphae of microscopic fungi.

Whole-genome sequencing of biofilm-forming and chromium-resistant mangrove fungus Aspergillus niger BSC-1

Filamentous fungus Aspergillus niger has gained significant industrial and ecological value due to its great potential in enzymatic activities. The present study reports the complete genome sequence of A. niger BSC-1 which was isolated from Indian Sundarban mangrove ecosystem. The study revealed that the genome of A. niger BSC-1 was 35.1 Mbp assembled in 40 scaffolds with 49.2% GC content. A total of 10,709 genes were reported out of which 10,535 genes were predicted for encoding the proteins. BUSCO assessment showed 98.6% of genome completeness indicating high quality genome sequencing. The genome sequencing of A. niger BSC-1 revealed the presence of rodA and exgA genes for initial adhesion to surface and Ags genes for matrix formation, during biofilm growth. OrthoVenn2 analysis revealed that A.niger BSC-1 shared 9552 gene clusters with the reference strain A. niger CBS554.65. Semi-quantitative RT-PCR analysis unveiled the role of Ags1 and P-type ATPase in fungal biofilm formation and chromium (Cr) resistance, respectively. During biofilm growth the expression of Ags1 significantly (P < 0.0001; two-way ANOVA followed by Sidak's multiple comparisons test) increased with respect to planktonic culture revealing the possible involvement of Ags1 in biofilm matrix formation. Expression of P-type ATPase gene was significantly upregulated (P < 0.0001; one-way ANOVA followed by Dunnett's multiple comparisons test) with the increasing chromium concentration in the fungal culture. Besides, several other genes encoding metalloprotease, copper and zinc binding proteins, and NADH-dependent oxidoreductase were also found in the genome of A. niger BSC-1. These proteins are also involved in heavy metal tolerance and nanofabrication indicating that this filamentous fungus A. niger BSC-1 could be potentially utilized for chromium detoxification through biofilm or nanobiremediation.

Lipid-Like Biofilm from a Clinical Brain Isolate of Aspergillus terreus: Quantification, Structural Characterization and Stages of the Formation Cycle

Invasive infections caused by filamentous fungi have increased considerably due to the alteration of the host's immune response. Aspergillus terreus is considered an emerging pathogen and has shown resistance to amphotericin B treatment, resulting in high mortality. The development of fungal biofilm is a virulence factor, and it has been described in some cases of invasive aspergillosis. In addition, although the general composition of fungal biofilms is known, findings related to biofilms of a lipid nature are rarely reported. In this study, we present the identification of a clinical strain of A. terreus by microbiological and molecular tools, also its in vitro biofilm development capacity: (i) Biofilm formation was quantified by Crystal Violet and reduction of tetrazolium salts assays, and simultaneously the stages of biofilm development were described by Scanning Electron Microscopy in High Resolution (SEM-HR). (ii) Characterization of the organizational structure of the biofilm was performed by SEM-HR. The hyphal networks developed on the surface, the abundant air channels created between the ECM (extracellular matrix) and the hyphae fused in anastomosis were described. Also, the presence of microhyphae is reported. (iii) The chemical composition of the ECM was analyzed by SEM-HR and CLSM (Confocal Laser Scanning Microscopy). Proteins, carbohydrates, nucleic acids and a relevant presence of lipid components were identified. Some structures of apparent waxy appearance were highlighted by SEM-HR and backscatter-electron diffraction, for which CLSM was previously performed. To our knowledge, this work is the first description of a lipid-type biofilm in filamentous fungi, specifically of the species A. terreus from a clinical isolate.

Metabolite Profile of the Micromycete Lecanicillium gracile Isolated from Plaster and Limestone

Lecanicillium gracile is a recently described micromycete species isolated from mineral-based building materials (plaster and limestone) in interiors of cultural heritage sites in Russia. In this work, the composition of L. gracile metabolites, as well as of the culture liquid, have been characterized. The results suggest that L. gracile is a promising candidate for the search for novel biologically active compounds. During the exponential growth phase, the diversity of metabolites in the mycelium was low; the metabolome profile demonstrated predominant accumulation of monosaccharides and polyols. In the stationary phase, the metabolite diversity in the L. gracile mycelium was high; apparently, at this stage biosynthesis dominated over energy-producing processes. L. gracile synthesized extracellular polymer compounds and shifted medium рН to the alkaline range. When fungi are developing on rock substrates, their extracellular polymer matrix not only serves to facilitate the formation of biofilms with other microorganisms of lithobiont communities, but also, at alkaline pH values, it promotes the formation of secondary calcite on calcium-containing substrates, such as limestone and marble. That is, L. gracile possesses certain biochemical traits that facilitate its long-term growth on rock substrates and reflect the specific character of interactions between the fungus and the substrate materials.

Comparison of cell viability assessment and visualization of Aspergillus niger biofilm with two fluorescent probe staining methods

Filamentous fungi are ubiquitous and frequent components of biofilms. A means to visualize them and quantify their viability is essential for understanding their development and disruption. However, quantifying filamentous fungal biofilms poses challenges because, unlike yeasts and bacteria, they are not composed of discrete cells of similar size. This research focused on filamentous fungal biofilms that are representative of those in the built environment. The objective of this study was to develop a rapid method to examine biofilm structure and quantify live (metabolically active/ membrane undamaged) and dead (inactive/ membrane damaged) cells in Aspergillus niger biofilms utilizing a fluorescent probe staining method and confocal laser scanning microscopy (CLSM). For this, we compared two commercially available probe staining kits that have been developed for bacterial and yeast systems. One method utilized the classic cell stain FUN 1 that exhibits orange-red fluorescent intravacuolar structures in metabolically active cells, while dead cells are fluoresced green. The second method utilized a combination of SYTO9 and propidium iodide (PI), and stains cells based on their membrane morphology. SYTO9 is a green fluorescent stain with the capacity to penetrate the living cell walls, and PI is a red fluorescent stain that can only penetrate dead or dying cells with damaged cell membranes. Following staining, the biofilms were imaged using CLSM and biofilm volumes and thickness were quantified using COMSTAT, a computer program that measures biofilm accumulation from digital image stacks. The results were compared to independent measurements of live-dead cell density, as well as a classic cell viability assay-XTT. The data showed that the combination of SYTO9 and PI is optimal for staining filamentous fungal biofilms.

Filamentous fungal biofilms: Conserved and unique aspects of extracellular matrix composition, mechanisms of drug resistance and regulatory networks in Aspergillus fumigatus

The filamentous fungus Aspergillus fumigatus is an ubiquitous mold that can cause invasive pulmonary infections in immunocompromised patients. Within the lung, A. fumigatus forms biofilms that can enhance resistance to antifungals and immune defenses, highlighting the importance of defining the mechanisms underlying biofilm development and associated emergent properties. A. fumigatus biofilms display a morphology and architecture that is distinct from bacterial and yeast biofilms. Moreover, A. fumigatus biofilms display unique characteristics in the composition of their extracellular matrix (ECM) and the regulatory networks governing biofilm formation. This review will discuss our current understanding of the form and function of A. fumigatus biofilms, including the unique components of ECM matrix, potential drug resistance mechanisms, the regulatory networks governing A. fumigatus biofilm formation, and potential therapeutics targeting these structures.

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

Biofilm Formation by Chromoblastomycosis Fungi Fonsecaea pedrosoi and Phialophora verrucosa: Involvement with Antifungal Resistance

Patients with chromoblastomycosis (CBM) suffer chronic tissue lesions that are hard to treat. Considering that biofilm is the main growth lifestyle of several pathogens and it is involved with both virulence and resistance to antimicrobial drugs, we have investigated the ability of CBM fungi to produce this complex, organized and multicellular structure. Fonsecaea pedrosoi and Phialophora verrucosa conidial cells were able to adhere on a polystyrene abiotic substrate, differentiate into hyphae and produce a robust viable biomass containing extracellular matrix. Confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) showed the tridimensional architecture of the mature biofilms, revealing a dense network of interconnected hyphae, inner channels and amorphous extracellular polymeric material. Interestingly, the co-culture of each fungus with THP-1 macrophage cells, used as a biotic substrate, induced the formation of a mycelial trap covering and damaging the macrophages. In addition, the biofilm-forming cells of F. pedrosoi and P. verrucosa were more resistant to the conventional antifungal drugs than the planktonic-growing conidial cells. The efflux pump activities of P. verrucosa and F. pedrosoi biofilms were significantly higher than those measured in conidia. Taken together, the data pointed out the biofilm formation by CBM fungi and brought up a discussion of the relevance of studies about their antifungal resistance mechanisms.

Biofilm Formation and Structure in the Filamentous Fungus Fusarium graminearum, a Plant Pathogen

Biofilms are protective structures for pathogens of plants and animals, in which cells are shielded from host defense responses and antimicrobial treatments. Although biofilms are well studied in bacterial pathogens, their development and structure in filamentous fungi, as well as their role in pathogenicity, are poorly understood. We show that the economically important plant pathogen Fusarium graminearum, a filamentous fungus, forms biofilms in vitro, which adhere to polystyrene, a hydrophobic surface. The biofilms have complex hyphal structures surrounded by a polymeric matrix that consists primarily of polysaccharides and extracellular nucleic acids, and lack lipids. Pellicles are formed in liquid cultures, floating biofilm masses that are common in bacterial biofilms, and noted but undescribed in filamentous fungal biofilms. Commonly, F. graminearum grows as hyphal colonies; however, on media which lack electron acceptors, an altered morphology is formed with predominantly short, bulbous hyphae embedded in the matrix. Supplementation of the biofilm-inducing medium with an electron acceptor restores the filamentous hyphal morphology, demonstrating that the formation of bulbous hyphae is due, at least in part, to oxidative stress. Plant hosts infected with pathogens generally respond by producing reactive oxygen species, commonly produced as a defense response. Thus, the formation of biofilms strongly suggests a role in protecting cells from host responses during the course of plant disease. IMPORTANCE Fusarium graminearum is a filamentous fungal pathogen that causes Fusarium head blight (FHB) in cereal crops, leading to devastating crop losses. We have demonstrated the ability of this pathogen to form biofilms. Biofilms are likely to be important in the disease cycle of F. graminearum and other plant pathogens, protecting cells from plant defenses and environmental conditions. Towards this end, we have characterized the formation of biofilms in F. graminearum in vitro, which, together with ongoing characterization of their association with host plants, provides a basis for understanding the functionality of biofilms in the pathogen disease cycle.

Shockwaves Increase In Vitro Resilience of Rhizopus oryzae Biofilm under Amphotericin B Treatment

Acoustical biophysical therapies, including ultrasound, radial pressure waves, and shockwaves, have been shown to harbor both a destructive and regenerative potential depending on physical treatment parameters. Despite the clinical relevance of fungal biofilms, little work exits comparing the efficacy of these modalities on the destruction of fungal biofilms. This study evaluates the impact of acoustical low-frequency ultrasound, radial pressure waves, and shockwaves on the viability and proliferation of in vitro Rhizopus oryzae biofilm under Amphotericin B induced apoptosis. In addition, the impact of a fibrin substrate in comparison with a traditional polystyrene well-plate one is explored. We found consistent, mechanically promoted increased Amphotericin B efficacy when treating the biofilm in conjunction with low frequency ultrasound and radial pressure waves. In contrast, shockwave induced effects of mechanotransduction results in a stronger resilience of the biofilm, which was evident by a marked increase in cellular viability, and was not observed in the other types of acoustical pressure waves. Our findings suggest that fungal biofilms not only provide another model for mechanistical investigations of the regenerative properties of shockwave therapies, but warrant future investigations into the clinical viability of the therapy.

Assessment of a potential bioproduct for controlling Cerotoma arcuata tingomariana (Coleoptera: Chrysomelidae)

AIMS

The leaf-feeding pest Cerotoma arcuata tingomariana (Bechyné) (Coleoptera: Chrysomelidae) produces huge economic losses in different crops. This study aimed to produce conidia by semisolid-state fermentation and to establish the insecticidal activity of two formulation prototypes based on a native Beauveria bassiana isolate for controlling this pest.

METHODS AND RESULTS

A novel fabric-based semisolid-state fermentation strategy for quick and large-scale conidia production was performed and characterized. Conidia were formulated as an emulsifiable concentrate (EC) and a water-dispersible granulate (WG). Afterwards, the mortality of C. a. tingomariana adults was assessed. A conidia concentration of 2.9 x10⁹ conidia cm^-2 was obtained after nine days-course fermentation and a yield of 33.4 g kg^-1 dry-substrate.

CONCLUSIONS

The polyester fabric-based fermentation is an efficient technique for producing and collecting B. bassiana spores. Regarding LC₉₀ , the potency analysis showed that the EC was 21-fold more potent than the non-formulated conidia, and ~2.6-fold more potent than the WG.

SIGNIFICANCE AND IMPACT OF STUDY

A high throughput fermentation based on polyester fabric as support for B. bassiana conidia production and subsequent formulation as an EC comprises a promising strategy for obtaining a bioproduct to control adults of C. a. tingomariana and other Chrysomelidae pests.

The composition, biotic network, and assembly of plastisphere protistan taxonomic and functional communities in plastic-mulching croplands

The increasing use of plastic film mulching has caused the accumulation of plastic film residue in soil. To date, most researches on the plastisphere have focused on bacterial and fungal communities, with few on protistan community, especially in terrestrial ecosystems. To understand plastisphere protistan communities, we collected plastic film residues from plastic-mulching croplands. The plastisphere significantly altered the alpha-diversity, structure, and composition of taxonomic and functional (consumers, phototrophs, and parasites) communities. In both the plastisphere and surrounding soil, although some consumers dominated the protistan community network, while their performance was weakened by mulch application. The ecological networks of the plastisphere community presented higher modularity, less complexity, and a lower proportion of positive connections than the networks of surrounding soil. In addition, the enriched plant pathogens (e.g., Spongospora) and keystone taxa classified as plant pathogens (e.g., Pythium) in the plastisphere imply that plastic film residues may pose a risk to soil health and plant performance. Neutral-based processes dominated the assembly of the plastisphere protistan communities, whereas niche-based processes governed the protistan community assembly of surrounding soil. This study reveals that plastic film residues generate a unique niche for protistan colonization, which disturbs protistan communities and threatens agricultural ecosystem health and function.

Characterization of Aspergillus nidulans Biofilm Formation and Structure and Their Inhibition by Pea Defensin Psd2

Approximately four million people contract fungal infections every year in Brazil, primarily caused by Aspergillus spp. The ability of these fungi to form biofilms in tissues and medical devices complicates treatment and contributes to high rates of morbidity and mortality in immunocompromised patients. Psd2 is a pea defensin of 5.4 kDa that possesses good antifungal activity against planktonic cells of representative pathogenic fungi. Its function depends on interactions with membrane and cell wall lipid components such as glucosylceramide and ergosterol. In the present study, we characterized Aspergillus nidulans biofilm formation and determined the effect of Psd2 on A. nidulans biofilms. After 4 hours, A. nidulans conidia adhered to polystyrene surfaces and formed a robust extracellular matrix-producing biofilm at 24 h, increasing thickness until 48 h Psd2 inhibited A. nidulans biofilm formation in a dose-dependent manner. Most notably, at 10 μM Psd2 inhibited 50% of biofilm viability and biomass and 40% of extracellular matrix production. Psd2 significantly decreased the colonized surface area by the biofilm and changed its level of organization, causing a shortening of length and diameter of hyphae and inhibition of conidiophore formation. This activity against A. nidulans biofilm suggests a potential use of Psd2 as a prototype to design new antifungal agents to prevent biofilm formation by A. nidulans and related species.

Stability and nutrients removal performance of a Phanerochaete chrysosporium-based aerobic granular sludge process by step-feeding and multi A/O conditions

A Phanerochaete chrysosporium-based aerobic granular sludge (PC-AGS) was developed by inoculating fungal mycelial pellets into a lab-scale aerobic granular sequencing batch reactor (AGSBR). A strategy using step-anaerobic feeding coupled with multi A/O conditions was adopted. The results showed that the removal efficiencies for total phosphorus (TP) and total inorganic nitrogen (TIN) were 94.56 ± 2.92% and 75.20 ± 7.74%, respectively, under relatively low aeration time. Compared with original AGS, the content of extracellular proteins for PC-AGS obviously increased from 18.61 to 41.44 mg/g MLSS by the end of phase I. Moreover, the mature granules had a larger size and better stability during the 100 days operation. Furthermore, the analysis of microbial diversity detected many key functional groups in PC-AGS granules that were beneficial to nutrients removal. This work demonstrated that the addition of fungal pellets not only enhanced the removal performance, but also improved the stability of the AGS system.

Gut biofilms: Bacteroides as model symbionts to study biofilm formation by intestinal anaerobes

Bacterial biofilms are communities of adhering bacteria that express distinct properties compared to their free-living counterparts, including increased antibiotic tolerance and original metabolic capabilities. Despite the potential impact of the biofilm lifestyle on the stability and function of the dense community of micro-organisms constituting the mammalian gut microbiota, the overwhelming majority of studies performed on biofilm formation by gut bacteria focused either on minor and often aerobic members of the community or on pathogenic bacteria. In this review, we discuss the reported evidence for biofilm-like structures formed by gut bacteria, the importance of considering the anaerobic nature of gut biofilms and we present the most recent advances on biofilm formation by Bacteroides, one of the most abundant genera of the human gut microbiota. Bacteroides species can be found attached to food particles and colonizing the mucus layer and we propose that Bacteroides symbionts are relevant models to probe the physiology of gut microbiota biofilms.

The formation kinetics and control of biofilms by three dominant fungi species isolated from groundwater

Filamentous fungi can enter drinking water supply systems in various ways, and exist in suspended or sessile states which threatens the health of individuals by posing a high risk of invasive infections. In this study, the biofilms formation kinetics of the three genera of fungal spores, Aspergillus niger (A. niger), Penicillium polonicum (P. polonicum) and Trichoderma harzianum (T. harzianum) isolated from the groundwater were reported, as well as the effects of water quality parameters were evaluated. In addition, the efficiency of low- concentrations of chlorine-based disinfectants (chlorine, chlorine dioxide and chloramine) on controlling the formation of fungal biofilms was assessed. The results showed that the biofilms formation of the three genera of fungi could be divided into the following four phases: induction, exponential, stationary and sloughing off. The optimum conditions for fungal biofilms formation were found to be neutral or weakly acidic at 28 °C with rich nutrition. In fact, A. niger, P. polonicum, and T. harzianum were not observed to form mature biofilms in actual groundwater within 120 hr. Carbon was found to have the maximum effect on the fungal biofilms formation in actual groundwater, followed by nitrogen and phosphorus. The resistance of fungal species to disinfectants during the formation of biofilms decreased in the order: A. niger > T. harzianum > P. polonicum. Chlorine dioxide was observed to control the biofilms formation with maximum efficiency, followed by chlorine and chloramine. Consequently, the results of this study will provide a beneficial understanding for the formation and control of fungal biofilms.

The aggregation of Aspergillus spores and the impact on their inactivation by chlorine-based disinfectants

The formation of fungal biofilm goes through some different states, including monodisperse state, aggregated state, germinated state, hyphal and biofilm. The aggregation of spores is a primary step of fungal biofilm development in aquatic systems. Previous studies on the inactivation of fungi were mostly performed in the monodisperse state of fungal spores and biofilm state, however, the inactivation of aggregated fungal spores is still unclear. In this study, the aggregated characteristics of fungal spores (Aspergillus fumigatus and Aspergillus flavus) at different pH values were firstly studied, and the inactivation efficiency of fungal spores at different aggregation degree by chlorine-based disinfectants was also clarified. The results showed that the aggregation degree of Aspergillus fumigatus was the highest at pH 9.0 while it was the lowest at pH 5.0. Aggregation between fungal spores was mainly mediated by occasional adhesin-adhesin interactions and electrostatic interactions. Compared with monodisperse spores, fungal spores were more resistant to chlorine-based disinfectants with the increase of spore aggregation degree. The inactivation rate constants of Aspergillus fumigatus at 30% and 63% aggregation degree were 1.5- and 4-folds lower than that of monodisperse spores, respectively. The lower proportion of membrane damage and higher intracellular reactive oxygen species level for aggregated spores than monodisperse spores was observed according to the flow cytometric results after chlorine-based disinfectants treatment. The reasons for the lower inactivation efficiency of aggregated spores are as following: the protection of outer layer spores and signals between aggregates lead to the increase of resistance for aggregated spores. This study is meaningful for the control of the fungal spores at different states in water.

Fungal Biofilms as a Valuable Target for the Discovery of Natural Products That Cope with the Resistance of Medically Important Fungi-Latest Findings

The development of new antifungal agents that target biofilms is an urgent need. Natural products, mainly from the plant kingdom, represent an invaluable source of these entities. The present review provides an update (2017-May 2021) on the available information on essential oils, propolis, extracts from plants, algae, lichens and microorganisms, compounds from different natural sources and nanosystems containing natural products with the capacity to in vitro or in vivo modulate fungal biofilms. The search yielded 42 articles; seven involved essential oils, two Brazilian propolis, six plant extracts and one of each, extracts from lichens and algae/cyanobacteria. Twenty articles deal with the antibiofilm effect of pure natural compounds, with 10 of them including studies of the mechanism of action and five dealing with natural compounds included in nanosystems. Thirty-seven manuscripts evaluated Candida spp. biofilms and two tested Fusarium and Cryptococcus spp. Only one manuscript involved Aspergillus fumigatus. From the data presented here, it is clear that the search of natural products with activity against fungal biofilms has been a highly active area of research in recent years. However, it also reveals the necessity of deepening the studies by (i) evaluating the effect of natural products on biofilms formed by the newly emerged and worrisome health-care associated fungi, C. auris, as well as on other non-albicans Candida spp., Cryptococcus sp. and filamentous fungi; (ii) elucidating the mechanisms of action of the most active natural products; (iii) increasing the in vivo testing.

Aspergillus fumigatus biofilms: Toward understanding how growth as a multicellular network increases antifungal resistance and disease progression

Aspergillus fumigatus is a saprophytic, filamentous fungus found in soils and compost and the causative agent of several pulmonary diseases in humans, birds, and other mammals. A. fumigatus and other filamentous fungi grow as networks of filamentous hyphae that have characteristics of a classic microbial biofilm. These characteristics include production of an extracellular matrix (ECM), surface adhesion, multicellularity, and increased antimicrobial drug resistance. A. fumigatus biofilm growth occurs in vivo at sites of infection, highlighting the importance of defining mechanisms underlying biofilm development and associated emergent properties. We propose that there are 3 distinct phases in the development of A. fumigatus biofilms: biofilm initiation, immature biofilm, and mature biofilm. These stages are defined both temporally and by unique genetic and structural changes over the course of development. Here, we review known mechanisms within each of these stages that contribute to biofilm structure, ECM production, and increased resistance to contemporary antifungal drugs. We highlight gaps in our understanding of biofilm development and function that when addressed are expected to aid in the development of novel antifungal therapies capable of killing filamentous fungal biofilms.

Biofilm formation in clinically relevant filamentous fungi: a therapeutic challenge

Biofilms are highly-organized microbial communities attached to a biotic or an abiotic surface, surrounded by an extracellular matrix secreted by the biofilm-forming cells. The majority of fungal pathogens contribute to biofilm formation within tissues or biomedical devices, leading to serious and persistent infections. The clinical significance of biofilms relies on the increased resistance to conventional antifungal therapies and suppression of the host immune system, which leads to invasive and recurrent fungal infections. While different features of yeast biofilms are well-described in the literature, the structural and molecular basis of biofilm formation of clinically related filamentous fungi has not been fully addressed. This review aimed to address biofilm formation in clinically relevant filamentous fungi.

Microplastics accumulate fungal pathogens in terrestrial ecosystems

Microplastic (MP) is a pervasive pollutant in nature that is colonised by diverse groups of microbes, including potentially pathogenic species. Fungi have been largely neglected in this context, despite their affinity for plastics and their impact as pathogens. To unravel the role of MP as a carrier of fungal pathogens in terrestrial ecosystems and the immediate human environment, epiplastic mycobiomes from municipal plastic waste from Kenya were deciphered using ITS metabarcoding as well as a comprehensive meta-analysis, and visualised via scanning electron as well as confocal laser scanning microscopy. Metagenomic and microscopic findings provided complementary evidence that the terrestrial plastisphere is a suitable ecological niche for a variety of fungal organisms, including important animal and plant pathogens, which formed the plastisphere core mycobiome. We show that MPs serve as selective artificial microhabitats that not only attract distinct fungal communities, but also accumulate certain opportunistic human pathogens, such as cryptococcal and Phoma-like species. Therefore, MP must be regarded a persistent reservoir and potential vector for fungal pathogens in soil environments. Given the increasing amount of plastic waste in terrestrial ecosystems worldwide, this interrelation may have severe consequences for the trans-kingdom and multi-organismal epidemiology of fungal infections on a global scale.

CONTROL DE Aedes aegypti (DIPTERA: CULICIDAE) MEDIANTE ACTINOBACTERIAS FORMADORAS DE BIOPELÍCULAS

El phylum Actinobacteria incluye miembros productores de compuestos bioinsecticidas. No obstante, la sobreexplotacion de metabolitos derivados de Streptomyces ha conllevado a explorar nuevas moléculas provenientes de bacterias no estreptomicetos para contrarrestar la resistencia a insecticidas químicos en Aedes aegypti. Concordantes con el uso de bioagentes ecológicos, esta investigación caracterizó actinobacterias formadoras de biopelículas con el fin de evaluar su dinámica de crecimiento, actividad larvicida y efectos subletales. La identificación, crecimiento de biopelículas y bioactividades se realizaron por cultivos, análisis de imágenes por fotomicrografía y bioensayos. Los resultados mostraron que las biopelículas pertenecen a Pseudonocardiaceae (PsA1TA) y Corynebacteriaceae (CoA2CA) característicamente dependientes del revestimiento cuticular. PsA1TA coloniza estructuras membranosas de tórax y abdomen con microcolonias aleatoriamente distribuidas que desarrollan a extensas biopelículas mono y biestratificadas, al cubrir cuatro veces la amplitud toracoabdominal (envergadura infectiva entre 1010 µm a 1036 µm). En contraste, CoA2CA envuelve radialmente estructuras esclerotizadas cefálica y anal al triplicar la amplitud de tales órganos (1820 a 2030 µm y 1650 a 1860 µm, respectivamente). Las biopelículas ejercieron mortalidad diferenciada a todos los estadios larvales, no obstante, PsA1TA resultó más mortal y virulento en el segundo estadio larval (58 %-96 horas, TL50: 3,4 días), mientras que CoA2CA lo fue en el cuarto estadio larval (85 %-96 horas, TL50: 2,5 días). CoA2CA indujo emergencia incompleta de adultos farados y despliegue de tarsos curvos en emergentes, además de revestir con robustas biopelículas cadáveres larvarios. Las biopelículas actinobacterianas revelaron ejercer función larvicida y respuestas subletales en A. aegypti.

Mimicking biofilm formation and development: Recent progress in in vitro and in vivo biofilm models

Biofilm formation in living organisms is associated to tissue and implant infections, and it has also been linked to the contribution of antibiotic resistance. Thus, understanding biofilm development and being able to mimic such processes is vital for the successful development of antibiofilm treatments and therapies. Several decades of research have contributed to building the foundation for developing in vitro and in vivo biofilm models. However, no such thing as an "all fit" in vitro or in vivo biofilm models is currently available. In this review, in addition to presenting an updated overview of biofilm formation, we critically revise recent approaches for the improvement of in vitro and in vivo biofilm models.

The characteristics of insoluble softwood substrates affect fungal morphology, secretome composition, and hydrolytic efficiency of enzymes produced by Trichoderma reesei

BACKGROUND

On-site enzyme production using Trichoderma reesei can improve yields and lower the overall cost of lignocellulose saccharification by exploiting the fungal gene regulatory mechanism that enables it to continuously adapt enzyme secretion to the substrate used for cultivation. To harness this, the interrelation between substrate characteristics and fungal response must be understood. However, fungal morphology or gene expression studies often lack structural and chemical substrate characterization. Here, T. reesei QM6a was cultivated on three softwood substrates: northern bleached softwood Kraft pulp (NBSK) and lodgepole pine pretreated either by dilute-acid-catalyzed steam pretreatment (LP-STEX) or mild alkaline oxidation (LP-ALKOX). With different pretreatments of similar starting materials, we presented the fungus with systematically modified substrates. This allowed the elucidation of substrate-induced changes in the fungal response and the testing of the secreted enzymes' hydrolytic strength towards the same substrates.

RESULTS

Enzyme activity time courses correlated with hemicellulose content and cellulose accessibility. Specifically, increased amounts of side-chain-cleaving hemicellulolytic enzymes in the protein produced on the complex substrates (LP-STEX; LP-ALKOX) was observed by secretome analysis. Confocal laser scanning micrographs showed that fungal micromorphology responded to changes in cellulose accessibility and initial culture viscosity. The latter was caused by surface charge and fiber dimensions, and likely restricted mass transfer, resulting in morphologies of fungi in stress. Supplementing a basic cellulolytic enzyme mixture with concentrated T. reesei supernatant improved saccharification efficiencies of the three substrates, where cellulose, xylan, and mannan conversion was increased by up to 27, 45, and 2800%, respectively. The improvement was most pronounced for proteins produced on LP-STEX and LP-ALKOX on those same substrates, and in the best case, efficiencies reached those of a state-of-the-art commercial enzyme preparation.

CONCLUSION

Cultivation of T. reesei on LP-STEX and LP-ALKOX produced a protein mixture that increased the hydrolytic strength of a basic cellulase mixture to state-of-the-art performance on softwood substrates. This suggests that the fungal adaptation mechanism can be exploited to achieve enhanced performance in enzymatic hydrolysis without a priori knowledge of specific substrate requirements.

Plant-associated fungal biofilms-knowns and unknowns

Nearly all microbes, including fungi, grow firmly attached to surfaces as a biofilm. Yet, attention toward fungal interactions with plants and the environment is dedicated to free-floating (planktonic) cells. Fungal biofilms are generally thought to configure interactions across and among plant populations. Despite this, plant fungal biofilm research lags far behind the research on biofilms of medically important fungi. The deficit in noticing and exploring this research avenue could limit disease management and plant improvement programs. Here, we provide the current state of knowledge of fungal biofilms and the different pivotal ecological roles they impart in the context of disease, through leveraging evidence across medically important fungi, secondary metabolite production, plant beneficial functions and climate change. We also provide views on several important information gaps potentially hampering plant fungal biofilm research, and propose a way forward to address these gaps.