Orbitrap mass spectrometry

Chemical profiling of paper recycling grades using GC-MS and LC-MS: An exploration of contaminants and their possible sources

Paper packaging made with recycled paperboard is used to pack various consumer goods that can include amongst others, electronics, toys, food, cosmetics, and stationery. Chemical profiling of the various paper recycling grades used in the manufacture of recycled paperboard was undertaken to investigate possible sources of contaminants and their propagation in the paper recycling chain. Pre-consumer, retail and post-consumer paper-based materials were collected at papermills, corrugators, grocery stores, household waste, solid waste disposal sites and recycling facilities. In the GC-MS analysis, phthalates, long-chain aliphatic compounds, and fatty acids were the most commonly detected compounds whilst phthalates and bisphenols featured most prevalently in the LC-MS analysis. The factors that were identified as likely contributors to the detection of the different chemical compounds included the presence of wood derivatives, the use of certain chemical additives during manufacturing, and exposure of paper to contaminants from consumers, other goods and the environment. Waste mingling, recovery, sorting and reprocessing into recycled paper were also shown to influence the chemical profile of paper materials. Sparse partial least squares-discriminate analysis indicated that newspaper and office paper had unique chemical constituents, whilst cartons were shown to have higher variability. By looking at key stages of paper recycling, this study showed that the possible persistence and transformation of chemical compounds in additives must be evaluated when considering the recyclability of paper-based materials. Further, it highlighted that different separation approaches may be required to reduce contaminant exposure opportunities in post-consumer paper materials.

Collision cross-section measurements of small molecules via transient decay profiles observed in Orbitrap mass analyzers

Collision cross section (CCS) of organic compounds can be measured via Fourier transform-based mass spectrometry (MS) by modeling the decay rate of transient signals in the analyzer. Deriving CCS values of low-mass molecules (mass < 2000 Da and CCS < 500 Å2) with Orbitrap MS is challenging due to their high axial frequencies and small absolute variances in cross-sectional profiles. Here, we acquired mass spectra of progressively more complex low-mass analytes using commercial Orbitrap mass spectrometers. The transient signals were processed using Fast Fourier transform (FFT) and short-time Fourier transform (StFFT) to derive decay constants of multiple select ionic species from a single MS full-scan experiment. Decay constants were translated into CCS values using at least two internal standards in the same mass spectrum. Our results suggest target ionic species should have high S/N in order to derive CCS values with ≤0.5% uncertainty. Limitations in the precision of CCS measurements reflect local space charge effects that disturb ion motion in the analyzer. The derived CCS values of polymer like fragments of Ultramark 1621 and small molecules such as individual protonated amino acids can achieve average ±1% error with selection of internal standards across a wide mass range. Future studies need to optimize the strategy to select internal standards in order to improve the precision and accuracy of CCS measurements for small molecules via Orbitrap MS.

Resolving Atmospheric Oxygenated Organic Molecules in Urban Beijing Using Online Ultrahigh-Resolution Chemical Ionization Mass Spectrometry

Gaseous oxygenated organic molecules (OOMs) are crucial precursors of atmospheric organic aerosols. OOMs in urban atmospheres have complex compositions, posing challenges to understanding their formation, evolution, and influences. In this study, we identify 2403 atmospheric gaseous OOMs in urban Beijing using online nitrate-based chemical ionization Orbitrap mass spectrometry based on one-year atmospheric measurements. We find that OOMs in urban atmospheres can be identified with higher accuracy and wider coverage, compared to previously used online mass spectrometry. With optimized OOM resolving capabilities, previous knowledge of OOMs in urban atmospheres can be expanded. First, clear homologous and oxygen-addition characteristics of the OOMs are revealed. Second, OOMs with lower concentrations or higher masses are identified and characterized with high confidence, e.g., OOMs with masses above 350 Da. In particular, dimers of OOMs (e.g., C20H32O8-15N2), crucial species for organic nucleation, are identified. During four seasons, nitrogen-containing OOMs dominate the total concentration of OOMs, and OOMs are mainly from aromatic and aliphatic oxidation. Additionally, radicals with similar composition as OOMs, intermediates for OOM formation, are identified with clear diurnal variation, e.g., CnH2n-5O6 radicals (n = 8-10) and CmH2m-4NO9 radicals (m = 9-10), peak during the daytime and nighttime, respectively, previously having scarce measurement evidence in urban atmospheres.

Multiomic biomarkers after cardiac arrest

Cardiac arrest is a sudden cessation of heart function, leading to an abrupt loss of blood flow and oxygen to vital organs. This life-threatening emergency requires immediate medical intervention and can lead to severe neurological injury or death. Methods and biomarkers to predict neurological outcome are available but lack accuracy. Such methods would allow personalizing healthcare and help clinical decisions. Extensive research has been conducted to identify prognostic omic biomarkers of cardiac arrest. With the emergence of technologies allowing to combine different levels of omics data, and with the help of artificial intelligence and machine learning, there is a potential to use multiomic signatures as prognostic biomarkers after cardiac arrest. This review article delves into the current knowledge of cardiac arrest biomarkers across various omic fields and suggests directions for future research aiming to integrate multiple omics data layers to improve outcome prediction and cardiac arrest patient's care.

Quantification of snake venom proteomes by mass spectrometry-considerations and perspectives

The advent of soft ionization mass spectrometry-based proteomics in the 1990s led to the development of a new dimension in biology that conceptually allows for the integral analysis of whole proteomes. This transition from a reductionist to a global-integrative approach is conditioned to the capability of proteomic platforms to generate and analyze complete qualitative and quantitative proteomics data. Paradoxically, the underlying analytical technique, molecular mass spectrometry, is inherently nonquantitative. The turn of the century witnessed the development of analytical strategies to endow proteomics with the ability to quantify proteomes of model organisms in the sense of "an organism for which comprehensive molecular (genomic and/or transcriptomic) resources are available." This essay presents an overview of the strategies and the lights and shadows of the most popular quantification methods highlighting the common misuse of label-free approaches developed for model species' when applied to quantify the individual components of proteomes of nonmodel species (In this essay we use the term "non-model" organisms for species lacking comprehensive molecular (genomic and/or transcriptomic) resources, a circumstance that, as we detail in this review-essay, conditions the quantification of their proteomes.). We also point out the opportunity of combining elemental and molecular mass spectrometry systems into a hybrid instrumental configuration for the parallel identification and absolute quantification of venom proteomes. The successful application of this novel mass spectrometry configuration in snake venomics represents a proof-of-concept for a broader and more routine application of hybrid elemental/molecular mass spectrometry setups in other areas of the proteomics field, such as phosphoproteomics, metallomics, and in general in any biological process where a heteroatom (i.e., any atom other than C, H, O, N) forms integral part of its mechanism.

Recent advances in mass spectrometry techniques for atmospheric chemistry research on molecular-level

The Earth's atmosphere is composed of an enormous variety of chemical species associated with trace gases and aerosol particles whose composition and chemistry have critical impacts on the Earth's climate, air quality, and human health. Mass spectrometry analysis as a powerful and popular analytical technique has been widely developed and applied in atmospheric chemistry for decades. Mass spectrometry allows for effective detection, identification, and quantification of a broad range of organic and inorganic chemical species with high sensitivity and resolution. In this review, we summarize recently developed mass spectrometry techniques, methods, and applications in atmospheric chemistry research in the past several years on molecular-level. Specifically, new developments of ion-molecule reactors, various soft ionization methods, and unique coupling with separation techniques are highlighted. The new mass spectrometry applications in laboratory studies and field measurements focused on improving the detection limits for traditional and emerging volatile organic compounds, characterizing multiphase highly oxygenated molecules, and monitoring particle bulk and surface compositions.

Comprehensive Overview of Bottom-Up Proteomics Using Mass Spectrometry

Proteomics is the large scale study of protein structure and function from biological systems through protein identification and quantification. "Shotgun proteomics" or "bottom-up proteomics" is the prevailing strategy, in which proteins are hydrolyzed into peptides that are analyzed by mass spectrometry. Proteomics studies can be applied to diverse studies ranging from simple protein identification to studies of proteoforms, protein-protein interactions, protein structural alterations, absolute and relative protein quantification, post-translational modifications, and protein stability. To enable this range of different experiments, there are diverse strategies for proteome analysis. The nuances of how proteomic workflows differ may be challenging to understand for new practitioners. Here, we provide a comprehensive overview of different proteomics methods. We cover from biochemistry basics and protein extraction to biological interpretation and orthogonal validation. We expect this Review will serve as a handbook for researchers who are new to the field of bottom-up proteomics.

High-Resolution Mass Spectrometry for Human Exposomics: Expanding Chemical Space Coverage

In the modern "omics" era, measurement of the human exposome is a critical missing link between genetic drivers and disease outcomes. High-resolution mass spectrometry (HRMS), routinely used in proteomics and metabolomics, has emerged as a leading technology to broadly profile chemical exposure agents and related biomolecules for accurate mass measurement, high sensitivity, rapid data acquisition, and increased resolution of chemical space. Non-targeted approaches are increasingly accessible, supporting a shift from conventional hypothesis-driven, quantitation-centric targeted analyses toward data-driven, hypothesis-generating chemical exposome-wide profiling. However, HRMS-based exposomics encounters unique challenges. New analytical and computational infrastructures are needed to expand the analysis coverage through streamlined, scalable, and harmonized workflows and data pipelines that permit longitudinal chemical exposome tracking, retrospective validation, and multi-omics integration for meaningful health-oriented inferences. In this article, we survey the literature on state-of-the-art HRMS-based technologies, review current analytical workflows and informatic pipelines, and provide an up-to-date reference on exposomic approaches for chemists, toxicologists, epidemiologists, care providers, and stakeholders in health sciences and medicine. We propose efforts to benchmark fit-for-purpose platforms for expanding coverage of chemical space, including gas/liquid chromatography-HRMS (GC-HRMS and LC-HRMS), and discuss opportunities, challenges, and strategies to advance the burgeoning field of the exposome.

High-Specificity Imaging Mass Spectrometry

Imaging mass spectrometry (IMS) enables highly multiplexed, untargeted tissue mapping for a broad range of molecular classes, facilitating in situ biological discovery. Yet, challenges persist in molecular specificity, which is the ability to discern one molecule from another, and spatial specificity, which is the ability to link untargeted imaging data to specific tissue features. Instrumental developments have dramatically improved IMS spatial resolution, allowing molecular observations to be more readily associated with distinct tissue features across spatial scales, ranging from larger anatomical regions to single cells. High-performance mass analyzers and systems integrating ion mobility technologies are also becoming more prevalent, further improving molecular coverage and the ability to discern chemical identity. This review provides an overview of recent advancements in high-specificity IMS that are providing critical biological context to untargeted molecular imaging, enabling integrated analyses, and addressing advanced biomedical research applications.

High-Throughput Proteomics Enabled by a Fully Automated Dual-Trap and Dual-Column LC-MS

This Technical Note describes a dual-column liquid chromatography system coupled to mass spectrometry (LC-MS) for high-throughput bottom-up proteomic analysis. This system made full use of two 2-position 10-port valves and a binary pump with an integrated loading pump of a commercial LC instrument to provide successive operation of two parallel subsystems. Each subsystem consisted of a set of trap columns and an analytical column. A T-junction union was used to split the mobile phase from the loading pump into two parts. This allowed one set of columns to be washed and equilibrated, followed by the injection of the next sample, while the previous sample was eluting and being analyzed on the other set of columns, thereby greatly increasing the analysis throughput. This approach showed high reproducibility for the analysis of HeLa tryptic digests with average relative standard deviation (RSD) values of 1.75%, 6.90%, and 5.19% for the identification number of proteins, peptides, and peptide-spectrum matches (PSMs), respectively, across 10 consecutive runs. The capacity for peptide and protein identification, as well as proteome depth, of the dual-column LC system was comparable to a conventional single-column system. Due to its simple equipment requirements and set up process, this method should be highly accessible for other laboratories.

Investigation of unexpected silane ions caused by gas-phase reactions in Orbitrap gas chromatography-mass spectrometry

RATIONALE

The mass spectra of compounds containing dimethyl (phenyl)silyl group (-SiMe2Ph) sometimes exhibit unusual ion peaks when measured using Orbitrap gas chromatography-mass spectrometry (GC-MS). This would complicate the mass spectra and may limit the matching of spectral data with preexisting resources for compound annotation. These peaks were identified as products from reactions with residual water.

METHODS

A series of dimethyl (phenyl)silyl compounds were dissolved in methanol and investigated using Orbitrap GC-MS. Certain ions reacted with residual water in the C-trap. The reaction was confirmed using accurate mass and elemental composition analysis via MS studies, and the active center of the reaction was determined using density functional theory (DFT) calculations.

RESULTS

Two types of gas-phase reactions between gaseous water and cations from a series of silanes were identified. DFT calculations indicate that silicon (Si) acts as the active center for these gas-phase water reactions. Compounds with multiple Si atoms generate a larger number of additional ions, which would complicate the mass spectra. The mass spectra of vinylsilanes and alkylsilanes with -SiMe2Ph indicate that the conjugated group linked to -SiMe2Ph can affect the water adduction process.

CONCLUSIONS

Silane ions could react with residual water in the C-trap of an Orbitrap mass spectrometer. The mass spectra of these compounds may exhibit unexplained peaks arising from gas-phase reactions. Although these reactions may decrease spectral matching scores for compound annotation, they offer opportunities for systematic investigations into the mechanistic and kinetic aspects of high-energy ion reactivity.

Extending the Range of Detectable Trace Species with the Fast Polarity Switching of Chemical Ionization Orbitrap Mass Spectrometry

Chemical ionization (CI) atmospheric pressure interface mass spectrometry is a unique analytical technique for its low detection limits, softness to preserve molecular information, and selectivity for particular classes of species. Here, we present a fast polarity switching approach for highly sensitive online analysis of a wide range of trace species in complex samples using selective CI chemistries and high-resolution mass spectrometry. It is achieved by successfully coupling a multischeme chemical ionization inlet (MION) and an Orbitrap Fourier transform mass spectrometer. The capability to flexibly combine ionization chemistries from both polarities effectively extends the detectability compared to using only one ionization chemistry, as commonly used positive and negative reagent ions tend to be sensitive to different classes of species. We tested the performance of the MION-Orbitrap using reactive gaseous organic species generated by α-pinene ozonolysis in an environmental chamber and a standard mixture of 71 pesticides. Diethylammonium and nitrate are used as reagent ions in positive and negative polarities. We show that with a mass resolving power of 280,000, the MION-Orbitrap can switch and measure both polarities within 1 min, which is sufficiently fast and stable to follow the temporal evolution of reactive organic species and the thermal desorption profile of pesticides. We detected 23 of the 71 pesticides in the mixture using only nitrate as the reagent ion. Facilitated by polarity switching, we also detected 47 pesticides using diethylammonium, improving the total number of detected species to 59. For reactive organic species generated by α-pinene ozonolysis, we show that combining diethylammonium and nitrate addresses the need to measure oxygenated molecules in atmospheric environments with a wide range of oxidation states. These results indicate that the polarity switching MION-Orbitrap can promisingly serve as a versatile tool for the nontargeted chemical analysis of trace species in various applications.

One-step online analysis of antibiotics in highly saline seawater by nano-based slug-flow microextraction

The transition to mass spectrometry (MS) in the analysis of antibiotics in the marine environment is highly desirable, particularly in the enhancement of sensitivity for high-salinity (3.5 wt%) seawater samples. However, the persistence of complex operational procedures poses substantial challenges to this transition. In this study, a rapid method for the online analysis of antibiotics in seawater samples via nano-electrospray ionization (nESI) MS based on slug-flow microextraction (SFME) has been proposed. Comparisons with other methods, complex laboratory setups for sample processing are now seamlessly integrated into a single online step, completing the entire process, including desalination and detection, SFME-nESI-MS provides faster results in less than 2 min while maintaining sensitivity comparable to that of other detection methods. Using SFME-nESI, six antibiotics in high-salinity (3.5 wt%) seawater samples have been determined in both positive and negative ion modes. The proposed method successfully detected clarithromycin, ofloxacin, and sulfadimidine in seawater within a linear range of 1-1000 ng mL-1 and limit of detection (LOD) of 0.23, 0.06, and 0.28 ng mL-1, respectively. The method recovery was from 92.8% to 107.3%, and the relative standard deviation was less than 7.5%. In addition, the response intensity of SFME-nESI-treated high-salinity (3.5 wt%) samples surpassed that of untreated medium-salinity (0.35 wt%) samples by two to five orders of magnitude. This advancement provides an exceptionally simplified protocol for the online rapid, highly sensitive, and quantitative determination of antibiotics in high-salinity (3.5 wt%) seawater.

Chromatographic Methods for the Determination of Glyphosate in Cereals Together with a Discussion of Its Occurrence, Accumulation, Fate, Degradation, and Regulatory Status

The European Union's recent decision to renew the authorization for the use of glyphosate until 15 December 2033 has stimulated scientific discussion all around the world regarding its toxicity or otherwise for humans. Glyphosate is a chemical of which millions of tons have been used in the last 50 years worldwide to dry out weeds in cultivated fields and greenhouses and on roadsides. Concern has been raised in many areas about its possible presence in the food chain and its consequent adverse effects on health. Both aspects that argue in favor of toxicity and those that instead may indicate limited toxicity of glyphosate are discussed here. The widespread debate that has been generated requires further investigations and field measurements to understand glyphosate's fate once dispersed in the environment and its concentration in the food chain. Hence, there is a need for validated analytical methods that are available to analysts in the field. In the present review, methods for the analytical determination of glyphosate and its main metabolite, AMPA, are discussed, with a specific focus on chromatographic techniques applied to cereal products. The experimental procedures are explained in detail, including the cleanup, derivatization, and instrumental conditions, to give the laboratories involved enough information to proceed with the implementation of this line of analysis. The prevalent chromatographic methods used are LC-MS/MS, GC-MS/SIM, and GC-MS/MS, but sufficient indications are also given to those laboratories that wish to use the better performing high-resolution MS or the simpler HPLC-FLD, HPLC-UV, GC-NPD, and GC-FPD techniques for screening purposes. The concentrations of glyphosate from the literature measured in wheat, corn, barley, rye, oats, soybean, and cereal-based foods are reported, together with its regulatory status in various parts of the world and its accumulation mechanism. As for its accumulation in cereals, the available data show that glyphosate tends to accumulate more in wholemeal flours than in refined ones, that its concentration in the product strictly depends on the treatment period (the closer it is to the time of harvesting, the higher the concentration), and that in cold climates, the herbicide tends to persist in the soil for a long time.

Characterization of Human B Cell Hematological Malignancies Using Protein-Based Approaches

The maturation of B cells is a complex, multi-step process. During B cell differentiation, errors can occur, leading to the emergence of aberrant versions of B cells that, finally, constitute a malignant tumor. These B cell malignancies are classified into three main groups: leukemias, myelomas, and lymphomas, the latter being the most heterogeneous type. Since their discovery, multiple biological studies have been performed to characterize these diseases, aiming to define their specific features and determine potential biomarkers for diagnosis, stratification, and prognosis. The rise of advanced -omics approaches has significantly contributed to this end. Notably, proteomics strategies appear as promising tools to comprehensively profile the final molecular effector of these cells. In this narrative review, we first introduce the main B cell malignancies together with the most relevant proteomics approaches. Then, we describe the core studies conducted in the field and their main findings and, finally, we evaluate the advantages and drawbacks of flow cytometry, mass cytometry, and mass spectrometry for the profiling of human B cell disorders.

Analysis and Characterization of the Extracellular Vesicles Released in Non-Cancer Diseases Using Matrix-Assisted Laser Desorption Ionization/Mass Spectrometry

The extracellular vesicles (EVs) released by cells play a crucial role in intercellular communications and interactions. The direct shedding of EVs from the plasma membrane represents a fundamental pathway for the transfer of properties and information between cells. These vesicles are classified based on their origin, biogenesis, size, content, surface markers, and functional features, encompassing a variety of bioactive molecules that reflect the physiological state and cell type of origin. Such molecules include lipids, nucleic acids, and proteins. Research efforts aimed at comprehending EVs, including the development of strategies for their isolation, purification, and characterization, have led to the discovery of new biomarkers. These biomarkers are proving invaluable for diagnosing diseases, monitoring disease progression, understanding treatment responses, especially in oncology, and addressing metabolic, neurological, infectious disorders, as well as advancing vaccine development. Matrix-Assisted Laser Desorption Ionization (MALDI)/Mass Spectrometry (MS) stands out as a leading tool for the analysis and characterization of EVs and their cargo. This technique offers inherent advantages such as a high throughput, minimal sample consumption, rapid and cost-effective analysis, and user-friendly operation. This review is mainly focused on the primary applications of MALDI-time-of-flight (TOF)/MS in the analysis and characterization of extracellular vesicles associated with non-cancerous diseases and pathogens that infect humans, animals, and plants.

Imaging Mass Spectrometry of Isotopically Resolved Intact Proteins on a Trapped Ion-Mobility Quadrupole Time-of-Flight Mass Spectrometer

In this work, we demonstrate rapid, high spatial, and high spectral resolution imaging of intact proteins by matrix-assisted laser desorption/ionization (MALDI) imaging mass spectrometry (IMS) on a hybrid quadrupole-reflectron time-of-flight (qTOF) mass spectrometer equipped with trapped ion mobility spectrometry (TIMS). Historically, untargeted MALDI IMS of proteins has been performed on TOF mass spectrometers. While advances in TOF instrumentation have enabled rapid, high spatial resolution IMS of intact proteins, TOF mass spectrometers generate relatively low-resolution mass spectra with limited mass accuracy. Conversely, the implementation of MALDI sources on high-resolving power Fourier transform (FT) mass spectrometers has allowed IMS experiments to be conducted with high spectral resolution with the caveat of increasingly long data acquisition times. As illustrated here, qTOF mass spectrometers enable protein imaging with the combined advantages of TOF and FT mass spectrometers. Protein isotope distributions were resolved for both a protein standard mixture and proteins detected from a whole-body mouse pup tissue section. Rapid (∼10 pixels/s) 10 μm lateral spatial resolution IMS was performed on a rat brain tissue section while maintaining isotopic spectral resolution. Lastly, proof-of-concept MALDI-TIMS data was acquired from a protein mixture to demonstrate the ability to differentiate charge states by ion mobility. These experiments highlight the advantages of qTOF and timsTOF platforms for resolving and interpreting complex protein spectra generated from tissue by IMS.

Tandem mass spectrometry using continuous-wave infrared multiphoton dissociation in an electrostatic linear ion trap

RATIONALE

The electrostatic linear ion trap (ELIT) can be operated as a multi-reflection time-of-flight (MR-TOF) or Fourier transform (FT) mass analyzer. It has been shown to be capable of performing high-resolution mass analysis and high-resolution ion isolations. Although it has been used in charge-detection mass spectrometry (CDMS), it has not been widely used as a conventional mass spectrometer for ensemble measurements of ions, or for tandem mass spectrometer. The advantages of tandem mass spectrometer with high-resolution ion isolations in the ELIT have thus not been fully exploited.

METHODS

A homebuilt ELIT was modified with BaF2 viewports to facilitate transmission of a laser beam at the turnaround point of the second ion mirror in the ELIT. Fragmentation that occurs at the turnaround point of these ion mirrors should result in minimal energy partitioning due to the low kinetic energy of ions at these points. The laser was allowed to irradiate ions for a period of many oscillations in the ELIT.

RESULTS

Due to the low energy absorption of gas-phase ions during each oscillation in the ELIT, fragmentation was found to occur over a range of oscillations in the ELIT generating a homogeneous ion beam. A mirror-switching pulse is shown to create time-varying perturbations in this beam that oscillate at the fragment ion characteristic frequencies and generate a time-domain signal. This was found to recover FT signal for protonated pYGGFL and pSGGFL precursor ions.

CONCLUSIONS

Fragmentation at the turnaround point of an ELIT by continuous-wave infrared multiphoton dissociation (cw-IRMPD) is demonstrated. In cases where laser power absorption is low and fragmentation occurs over many laps, a mirror-switching pulse may be used to recover varying time-domain signal. The combination of laser activation at the turnaround points and mirror-switching isolation allows for tandem MS in the ELIT.

Toward a More Comprehensive Approach for Dissolved Organic Matter Chemical Characterization Using an Orbitrap Fusion Tribrid Mass Spectrometer Coupled with Ion and Liquid Chromatography Techniques

Dissolved organic matter (DOM) represents one of the largest active organic carbon pools in the global carbon cycle. Although extensively studied, only <10% of DOM has been chemically characterized into individual dissolved compounds due to its molecular complexity. This study introduced a more comprehensive DOM characterization method by coupling both ion chromatography (IC) and liquid chromatography (LC) with high mass accuracy and resolution mass spectrometry. We presented a new on-the-fly mass calibration of the Orbitrap technique by utilizing the "lock mass" function in the Orbitrap Fusion Tribrid mass spectrometer (OT-FTMS), which assures high mass accuracy at every scan by a postcolumn introduction of internal labeled standards. With both IC and LC, tested unlabeled standards of amino acids, small peptides, and organic acids were consistently below 1.0 ppm mass error, giving the OT-FTMS the potential of reaching mass accuracy of the Fourier-transform ion cyclotron resonance mass spectrometer. In addition to mass accuracy, a pooled quality control sample (QC) was used to increase reproducibility by applying systematic error removal using random forest (SERRF). Using an untargeted mass spectrometry approach, estuarine DOM samples were analyzed by OT-FTMS coupled to IC in negative mode and LC in positive mode detection to cover a wide range of highly cationic to highly anionic molecules. As a proof of concept, we focused on elucidating the structures of three distinct DOM compound classes with varied acidities and basicities. In UPLC-OT-FTMS, a total of 915 compounds were detected. We putatively elucidated 44 small peptides and 33 deaminated peptides of these compounds. With IC-OT-FTMS, a total of 1432 compounds were detected. We putatively elucidated 20 peptides, 268 deaminated peptides, and 188 organic acids. Except for five compounds, all putatively elucidated compounds were uniquely detected in their corresponding chromatography technique. These results highlight the need for combining these two techniques to provide a more comprehensive method for DOM characterization. Application of the combined IC and LC techniques is not limited to DOM chemical characterization. It can analyze other complex compound mixtures, such as metabolites, and anthropogenic pollutants, such as pesticides and endocrine-disrupting chemicals, in environmental and biological samples.

From sound check to encore: A journey through high-resolution mass spectrometry-based food analyses and metabolomics

This manuscript presents a comprehensive review of high-resolution mass spectrometry in the field of food analysis and metabolomics. We have followed the historical evolution of metabolomics, its associated techniques and technologies, and its increasing role in food science and research. The review provides a critical comparison and synthesis of tentative identification guidelines proposed for over 15 years, offering a condensed resource for researchers in the field. We have also examined a wide range of recent metabolomics studies, showcasing various methodologies and highlighting key findings as a testimony of the versatility of the field and the possibilities it offers. In doing so, we have also carefully provided a compilation of the software tools that may be employed in this type of studies. The manuscript also explores the prospects of high-resolution mass spectrometry and metabolomics in food science. By covering the history, guidelines, applications, and tools of metabolomics, this review attempts to become a comprehensive guide for researchers in a rapidly evolving field.

Special Issue with Research Topics on "Recent Analysis and Applications of Mass Spectra on Biochemistry"

Analytical mass spectrometry applies irreplaceable mass spectrometric (MS) methods to analytical chemistry and chemical analysis, among other areas of analytical science [...].

Full Mass Range ΦSDM Orbitrap Mass Spectrometry for DIA Proteome Analysis

Optimizing data-independent acquisition methods for proteomics applications often requires balancing spectral resolution and acquisition speed. Here, we describe a real-time full mass range implementation of the phase-constrained spectrum deconvolution method (ΦSDM) for Orbitrap mass spectrometry that increases mass resolving power without increasing scan time. Comparing its performance to the standard enhanced Fourier transformation signal processing revealed that the increased resolving power of ΦSDM is beneficial in areas of high peptide density and comes with a greater ability to resolve low-abundance signals. In a standard 2 h analysis of a 200 ng HeLa digest, this resulted in an increase of 16% in the number of quantified peptides. As the acquisition speed becomes even more important when using fast chromatographic gradients, we further applied ΦSDM methods to a range of shorter gradient lengths (21, 12, and 5 min). While ΦSDM improved identification rates and spectral quality in all tested gradients, it proved particularly advantageous for the 5 min gradient. Here, the number of identified protein groups and peptides increased by >15% in comparison to enhanced Fourier transformation processing. In conclusion, ΦSDM is an alternative signal processing algorithm for processing Orbitrap data that can improve spectral quality and benefit quantitative accuracy in typical proteomics experiments, especially when using short gradients.

Pharmacogenomics Beyond Single Common Genetic Variants: The Way Forward

Interindividual variability in genes encoding drug-metabolizing enzymes, transporters, receptors, and human leukocyte antigens has a major impact on a patient's response to drugs with regard to efficacy and safety. Enabled by both technological and conceptual advances, the field of pharmacogenomics is developing rapidly. Major progress in omics profiling methods has enabled novel genotypic and phenotypic characterization of patients and biobanks. These developments are paralleled by advances in machine learning, which have allowed us to parse the immense wealth of data and establish novel genetic markers and polygenic models for drug selection and dosing. Pharmacogenomics has recently become more widespread in clinical practice to personalize treatment and to develop new drugs tailored to specific patient populations. In this review, we provide an overview of the latest developments in the field and discuss the way forward, including how to address the missing heritability, develop novel polygenic models, and further improve the clinical implementation of pharmacogenomics.

Ultrahigh-Mass Resolution Mass Spectrometry Imaging with an Orbitrap Externally Coupled to a High-Performance Data Acquisition System

Matrix-assisted laser desorption ionization (MALDI) mass spectrometry imaging (MSI) is a powerful analytical tool that enables molecular sample analysis while simultaneously providing the spatial context of hundreds or even thousands of analytes. However, because of the lack of a separation step prior to ionization and the immense diversity of biomolecules, such as lipids, including numerous isobaric species, the coupling of ultrahigh mass resolution (UHR) with MSI presents one way in which this complexity can be resolved at the spectrum level. Until now, UHR MSI platforms have been restricted to Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometers. Here, we demonstrate the capabilities of an Orbitrap-based UHR MSI platform to reach over 1,000,000 mass resolution in a lipid mass range (600-950 Da). Externally coupling the Orbitrap Q Exactive HF with the high-performance data acquisition system FTMS Booster X2 provided access to the unreduced data in the form of full-profile absorption-mode FT mass spectra. In addition, it allowed us to increase the time-domain transient length from 0.5 to 10 s, providing improvement in the mass resolution, signal-to-noise ratio, and mass accuracy. The resulting UHR performance generates high-quality MALDI MSI images and simplifies the identification of lipids. Collectively, these improvements resulted in a 1.5-fold increase in annotations, demonstrating the advantages of this UHR imaging platform for spatial lipidomics using MALDI-MSI.

Uncovering Distinct Peptide Charging Behaviors in Electrospray Ionization Mass Spectrometry Using a Large-Scale Dataset

Electrospray ionization is a powerful and prevalent technique used to ionize analytes in mass spectrometry. The distribution of charges that an analyte receives (charge state distribution, CSD) is an important consideration for interpreting mass spectra. However, due to an incomplete understanding of the ionization mechanism, the analyte properties that influence CSDs are not fully understood. Here, we employ a machine learning-based approach and analyze CSDs of hundreds of thousands of peptides. Interestingly, half of the peptides exhibit charges that differ from what one would naively expect (the number of basic sites). We find that these peptides can be classified into two regimes (undercharging and overcharging) and that these two regimes display markedly different charging characteristics. Notably, peptides in the overcharging regime show minimal dependence on basic site count, and more generally, the two regimes exhibit distinct sequence determinants. These findings highlight the rich ionization behavior of peptides and the potential of CSDs for enhancing peptide identification.

Mass spectrometry-based proteomics approaches to interrogate skeletal muscle adaptations to exercise

Acute exercise and chronic exercise training elicit beneficial whole-body changes in physiology that ultimately depend on profound alterations to the dynamics of tissue-specific proteins. Since the work accomplished during exercise owes predominantly to skeletal muscle, it has received the majority of interest from exercise scientists that attempt to unravel adaptive mechanisms accounting for salutary metabolic effects and performance improvements that arise from training. Contemporary scientists are also beginning to use mass spectrometry-based proteomics, which is emerging as a powerful approach to interrogate the muscle protein signature in a more comprehensive manner. Collectively, these technologies facilitate the analysis of skeletal muscle protein dynamics from several viewpoints, including changes to intracellular proteins (expression proteomics), secreted proteins (secretomics), post-translational modifications as well as fiber-, cell-, and organelle-specific changes. This review aims to highlight recent literature that has leveraged new workflows and advances in mass spectrometry-based proteomics to further our understanding of training-related changes in skeletal muscle. We call attention to untapped areas in skeletal muscle proteomics research relating to exercise training and metabolism, as well as basic points of contention when applying mass spectrometry-based analyses, particularly in the study of human biology. We further encourage researchers to couple the hypothesis-generating and descriptive nature of omics data with functional analyses that propel our understanding of the complex adaptive responses in skeletal muscle that occur with acute and chronic exercise.

A new absolute quantitative method for peptide and metabolite detection

Mass spectrometry is widely employed in various analytical fields for both compound identification and quantification. While in the case of compound identification, the high-resolution instrument has increased selectivity and characterization efficiency; in the case of quantitative analysis, some critical tasks actually remain. In particular, different compounds exhibit different ionization efficiency, and this introduces the need to have a calibration standard for each analyte. In this paper, we present a new elaborative data technology, which makes it possible to standardize calibration between different instruments and molecules, making it absolute. The method was applied to data acquired by means of liquid chromatography mass spectrometry by means of an ion trap analyzer. The approach is based on the correlation of the ion trap space charge effect and the analyte concentration. The method was validated in the analysis of compounds having different polarity: hydrossitirosol, arginine, thyodiglicolic acid, and a peptide mixture of bacteria cultures derived the human gut microbiome where was found poliovirus. Moreover, it was used to obtain the absolute quantitation of peptides originating from the tryptic digestion of bacterial proteins in the fecal samples. It was therefore possible to identify and quantify different derived bacterial proteins of the poliomyelitis virus coded in bacteria derived from the gastrointestinal tract.

Comprehensive analysis of oxylipins using reverse phase liquid chromatography and data dependent acquisition workflow on LTQ-Orbitrap® Velos Pro

Oxylipins - involved in inflammatory processes - are reported in several diseases, in biological, pharmacological, and physiological fields. To face the structural complexity of oxylipins, the study of isomers and isobars species relied on Selected Reaction Monitoring (SRM) and Multiple Reaction Monitoring (MRM) in tandem mass spectrometry such as triple quadrupole, quadrupole-Time of Flight (TOF). Unfortunately, false positive signals in cellular matrix could occur using MRM or SRM mode since the MS/MS spectrum of each molecule is not acquired with the previous mode to help molecule confirmation. Using the versatile ability of LTQ-Orbitrap® Velos Pro mass spectrometer, we developed a novel method based on data dependent acquisition (DDA) workflow for oxylipins analysis. To reach sufficient data points per peak and a better sensitivity to quantify oxylipins traces, an optimization of the acquisition frequency was carried out both on linear trap and Orbitrap analyzers. A segmentation of the chromatographic profile and an optimization of the collision energies by HCD (higher energy collision dissociation) for each eicosanoid increased the acquisition frequency significantly and the detection threshold: around 2 pg for some prostanoids and 0.02-2 pg for some leukotrienes and oxidized species. We validated our method in terms of specificity (RSD <10%), sensitivity, accuracy and precision. The intra and inter-day accuracy were between 86.56% and 114.93%. Besides, a relative standard deviation less than 15% as intra- and inter-day precision were obtained for almost all molecules. A linear range between 2.5 and 12,500 pg was reached. DDA approach on LTQ-Orbitrap® constitutes an alternative to MRM mode on triple quadrupole for eicosanoids quantification in complex matrices. Finally, this method helped us to compare for the first time the amount of prostanoids released by J774 and THP-1 macrophages under lipopolysaccharide (LPS) stimulation.

Quantitative analysis of therapeutic proteins in biological fluids: recent advancement in analytical techniques

Pharmaceutical application of therapeutic proteins has been continuously expanded for the treatment of various diseases. Efficient and reliable bioanalytical methods are essential to expedite the identification and successful clinical development of therapeutic proteins. In particular, selective quantitative assays in a high-throughput format are critical for the pharmacokinetic and pharmacodynamic evaluation of protein drugs and to meet the regulatory requirements for new drug approval. However, the inherent complexity of proteins and many interfering substances presented in biological matrices have a great impact on the specificity, sensitivity, accuracy, and robustness of analytical assays, thereby hindering the quantification of proteins. To overcome these issues, various protein assays and sample preparation methods are currently available in a medium- or high-throughput format. While there is no standard or universal approach suitable for all circumstances, a liquid chromatography-tandem mass spectrometry (LC-MS/MS) assay often becomes a method of choice for the identification and quantitative analysis of therapeutic proteins in complex biological samples, owing to its high sensitivity, specificity, and throughput. Accordingly, its application as an essential analytical tool is continuously expanded in pharmaceutical R&D processes. Proper sample preparation is also important since clean samples can minimize the interference from co-existing substances and improve the specificity and sensitivity of LC-MS/MS assays. A combination of different methods can be utilized to improve bioanalytical performance and ensure more accurate quantification. This review provides an overview of various protein assays and sample preparation methods, with particular emphasis on quantitative protein analysis by LC-MS/MS.

UPLC-Q-Orbitrap-MS/MS-Guided Isolation of Bioactive Withanolides from the Fruits of Physalis angulata

Physalis angulata Linn. is an exotic Amazonian fruit that is commonly recognized as wild tomato, winter cherry, and gooseberry. While its fruit is known to contain many nutrients, such as minerals, fibers, and vitamins, few papers have investigated withanolide derivatives from its fruits. UPLC-Q-Orbitrap-MS/MS, which produces fragmentation spectra, was applied for the first time to guide the isolation of bioactive withanolide derivatives from P. angulata fruits. As a result, twenty-six withanolide derivatives, including two novel 1,10-secowithanolides (1 and 2) and a new derivative (3), were obtained. Compounds 1 and 2 are rare rearranged 1,10-secowithanolides with a tetracyclic 7/6/6/5 ring system. All structures were assigned through various spectroscopic data and quantum chemical calculations. Nine withanolide derivatives exhibited significant inhibitory effects on three tumor cell lines with IC50 values of 0.51-13.79 μM. Moreover, three new compounds (1-3) exhibited potential nitric oxide inhibitory effects in lipopolysaccharide-stimulated RAW264.7 cells (IC50: 7.51-61.8 μM). This investigation indicated that fruits of P. angulata could be applied to treat and prevent cancer and inflammatory-related diseases due to their potent active withanolide derivatives.

Redefining serological diagnostics with immunoaffinity proteomics

Serological diagnostics is generally defined as the detection of specific human immunoglobulins developed against viral, bacterial, or parasitic diseases. Serological tests facilitate the detection of past infections, evaluate immune status, and provide prognostic information. Serological assays were traditionally implemented as indirect immunoassays, and their design has not changed for decades. The advantages of straightforward setup and manufacturing, analytical sensitivity and specificity, affordability, and high-throughput measurements were accompanied by limitations such as semi-quantitative measurements, lack of universal reference standards, potential cross-reactivity, and challenges with multiplexing the complete panel of human immunoglobulin isotypes and subclasses. Redesign of conventional serological tests to include multiplex quantification of immunoglobulin isotypes and subclasses, utilize universal reference standards, and minimize cross-reactivity and non-specific binding will facilitate the development of assays with higher diagnostic specificity. Improved serological assays with higher diagnostic specificity will enable screenings of asymptomatic populations and may provide earlier detection of infectious diseases, autoimmune disorders, and cancer. In this review, we present the major clinical needs for serological diagnostics, overview conventional immunoassay detection techniques, present the emerging immunoassay detection technologies, and discuss in detail the advantages and limitations of mass spectrometry and immunoaffinity proteomics for serological diagnostics. Finally, we explore the design of novel immunoaffinity-proteomic assays to evaluate cell-mediated immunity and advance the sequencing of clinically relevant immunoglobulins.

Data-Driven Optimization of DIA Mass Spectrometry by DO-MS

Mass spectrometry (MS) enables specific and accurate quantification of proteins with ever-increasing throughput and sensitivity. Maximizing this potential of MS requires optimizing data acquisition parameters and performing efficient quality control for large datasets. To facilitate these objectives for data-independent acquisition (DIA), we developed a second version of our framework for data-driven optimization of MS methods (DO-MS). The DO-MS app v2.0 (do-ms.slavovlab.net) allows one to optimize and evaluate results from both label-free and multiplexed DIA (plexDIA) and supports optimizations particularly relevant to single-cell proteomics. We demonstrate multiple use cases, including optimization of duty cycle methods, peptide separation, number of survey scans per duty cycle, and quality control of single-cell plexDIA data. DO-MS allows for interactive data display and generation of extensive reports, including publication of quality figures that can be easily shared. The source code is available at github.com/SlavovLab/DO-MS.

Proteomics: Its Promise and Pitfalls in Shaping Precision Medicine in Solid Organ Transplantation

Solid organ transplantation is an established treatment of choice for end-stage organ failure. However, all transplant patients are at risk of developing complications, including allograft rejection and death. Histological analysis of graft biopsy is still the gold standard for evaluation of allograft injury, but it is an invasive procedure and prone to sampling errors. The past decade has seen an increased number of efforts to develop minimally invasive procedures for monitoring allograft injury. Despite the recent progress, limitations such as the complexity of proteomics-based technology, the lack of standardization, and the heterogeneity of populations that have been included in different studies have hindered proteomic tools from reaching clinical transplantation. This review focuses on the role of proteomics-based platforms in biomarker discovery and validation in solid organ transplantation. We also emphasize the value of biomarkers that provide potential mechanistic insights into the pathophysiology of allograft injury, dysfunction, or rejection. Additionally, we forecast that the growth of publicly available data sets, combined with computational methods that effectively integrate them, will facilitate a generation of more informed hypotheses for potential subsequent evaluation in preclinical and clinical studies. Finally, we illustrate the value of combining data sets through the integration of 2 independent data sets that pinpointed hub proteins in antibody-mediated rejection.

What's the defect? Using mass defects to study oligomerization of membrane proteins and peptides in nanodiscs with native mass spectrometry

Many membrane proteins form functional complexes that are either homo- or hetero-oligomeric. However, it is challenging to characterize membrane protein oligomerization in intact lipid bilayers, especially for polydisperse mixtures. Native mass spectrometry of membrane proteins and peptides inserted in lipid nanodiscs provides a unique method to study the oligomeric state distribution and lipid preferences of oligomeric assemblies. To interpret these complex spectra, we developed novel data analysis methods using macromolecular mass defect analysis. Here, we provide an overview of how mass defect analysis can be used to study oligomerization in nanodiscs, discuss potential limitations in interpretation, and explore strategies to resolve these ambiguities. Finally, we review recent work applying this technique to studying formation of antimicrobial peptide, amyloid protein, and viroporin complexes with lipid membranes.

Concise review on the combined use of immunocapture, mass spectrometry and liquid chromatography for clinical applications

Immunocapture is now a well-established method for sample preparation prior to quantitation of peptides and proteins in complex matrices. This short review will give an overview of some clinical applications of immunocapture methods, as well as protocols with and without enzymatic digestion in a clinical context. The advantages and limitations of both approaches are discussed in detail. Challenges related to the choice of mass spectrometer are also discussed. Top-down, middle-down, and bottom-up approaches are discussed. Even though immunocapture has its limitations, its main advantage is that it provides an additional dimension of separation and/or isolation when working with peptides and proteins. Overall, this short review demonstrates the potential of such techniques in the field of proteomics-based clinical medicine and paves the way for better personalized medicine.

Critical Assessment of the Chemical Space Covered by LC-HRMS Non-Targeted Analysis

Non-targeted analysis (NTA) has emerged as a valuable approach for the comprehensive monitoring of chemicals of emerging concern (CECs) in the exposome. The NTA approach can theoretically identify compounds with diverse physicochemical properties and sources. Even though they are generic and have a wide scope, non-targeted analysis methods have been shown to have limitations in terms of their coverage of the chemical space, as the number of identified chemicals in each sample is very low (e.g., ≤5%). Investigating the chemical space that is covered by each NTA assay is crucial for understanding the limitations and challenges associated with the workflow, from the experimental methods to the data acquisition and data processing techniques. In this review, we examined recent NTA studies published between 2017 and 2023 that employed liquid chromatography-high-resolution mass spectrometry. The parameters used in each study were documented, and the reported chemicals at confidence levels 1 and 2 were retrieved. The chosen experimental setups and the quality of the reporting were critically evaluated and discussed. Our findings reveal that only around 2% of the estimated chemical space was covered by the NTA studies investigated for this review. Little to no trend was found between the experimental setup and the observed coverage due to the generic and wide scope of the NTA studies. The limited coverage of the chemical space by the reviewed NTA studies highlights the necessity for a more comprehensive approach in the experimental and data processing setups in order to enable the exploration of a broader range of chemical space, with the ultimate goal of protecting human and environmental health. Recommendations for further exploring a wider range of the chemical space are given.

Data-Driven Optimization of DIA Mass Spectrometry by DO-MS

Mass spectrometry (MS) enables specific and accurate quantification of proteins with ever increasing throughput and sensitivity. Maximizing this potential of MS requires optimizing data acquisition parameters and performing efficient quality control for large datasets. To facilitate these objectives for data independent acquisition (DIA), we developed a second version of our framework for data-driven optimization of mass spectrometry methods (DO-MS). The DO-MS app v2.0 ( do-ms.slavovlab.net ) allows to optimize and evaluate results from both label free and multiplexed DIA (plexDIA) and supports optimizations particularly relevant for single-cell proteomics. We demonstrate multiple use cases, including optimization of duty cycle methods, peptide separation, number of survey scans per duty cycle, and quality control of single-cell plexDIA data. DO-MS allows for interactive data display and generation of extensive reports, including publication quality figures, that can be easily shared. The source code is available at: github.com/SlavovLab/DO-MS .

Application of infrared matrix-assisted laser desorption electrospray ionization mass spectrometry for morphine imaging in brain tissue

Here, we present a method developed for the analysis of spatial distributions of morphine in mouse brain tissue using infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) coupled to a Q Exactive Plus mass spectrometer. The method is also capable of evaluating spatial distributions of the antiretroviral drug abacavir. To maximize sensitivity to morphine, we analyze various Orbitrap mass spectrometry acquisition modes utilizing signal abundance and frequency of detection as evaluation criteria. We demonstrate detection of morphine in mouse brain and establish that the selected ion monitoring mode provides 2.5 times higher sensitivity than the full-scan mode. We find that distributions of morphine and abacavir are highly correlated with the Pearson correlation coefficient R = 0.87. Calibration showed that instrument response is linear up to 40 pg/mm2 (3.8 μg/g of tissue).

A comparison of high- and low-resolution gas chromatography-mass spectrometry for herbal product classification: A case study with Ocimum essential oils

INTRODUCTION

Selection of marker compounds for targeted chemical analysis is complicated when considering varying instrumentation and closely related plant species. High-resolution gas chromatography-mass spectrometry (GC-MS), via orbitrap detection, has yet to be evaluated for improved marker compound selection.

OBJECTIVE

This study directly compares high- and low-resolution GC-MS for botanical maker compound selection using Ocimum tenuiflorum L. (OT) and Ocimum gratissimum L. (OG) for botanical ingredient authentication.

METHODS

The essential oils of OT and OG were collected via hydrodistillation before untargeted chemical analysis with gas chromatography coupled to single-quadrupole (GC-SQ) and orbitrap (GC-Orbitrap) detectors. The Global Natural Products Social Molecular Networking (GNPS) software was used for compound annotation, and a manual search was used to find the 41 most common Ocimum essential oil metabolites.

RESULTS

The GC-Orbitrap resulted in 1.7-fold more metabolite detection and increased dynamic range compared to the GC-SQ. Spectral matching and manual searching were improved with GC-Orbitrap data. Each instrument had differing known compound concentrations; however, there was an overlap of six compounds with higher abundance in OG than OT and three compounds with a higher abundance in OT than OG, suggesting consistent detection of the most variable compounds. An unsupervised principal component analysis (PCA) could not discern the two species with either dataset.

CONCLUSION

GC-Orbitrap instrumentation improves compound detection, dynamic range, and feature annotation in essential oil analysis. However, considering both high- and low-resolution data may improve reliable marker compound selection, as GC-Orbitrap analysis alone did not improve unsupervised separation of two Ocimum species compared to GC-SQ data.

Conformational restriction shapes the inhibition of a multidrug efflux adaptor protein

Membrane efflux pumps play a major role in bacterial multidrug resistance. The tripartite multidrug efflux pump system from Escherichia coli, AcrAB-TolC, is a target for inhibition to lessen resistance development and restore antibiotic efficacy, with homologs in other ESKAPE pathogens. Here, we rationalize a mechanism of inhibition against the periplasmic adaptor protein, AcrA, using a combination of hydrogen/deuterium exchange mass spectrometry, cellular efflux assays, and molecular dynamics simulations. We define the structural dynamics of AcrA and find that an inhibitor can inflict long-range stabilisation across all four of its domains, whereas an interacting efflux substrate has minimal effect. Our results support a model where an inhibitor forms a molecular wedge within a cleft between the lipoyl and αβ barrel domains of AcrA, diminishing its conformational transmission of drug-evoked signals from AcrB to TolC. This work provides molecular insights into multidrug adaptor protein function which could be valuable for developing antimicrobial therapeutics.

Dynamic Energy Measurements in Charge Detection Mass Spectrometry Eliminate Adverse Effects of Ion-Ion Interactions

Ion-ion interactions in charge detection mass spectrometers that use electrostatic traps to measure masses of individual ions have not been reported previously, although ion trajectory simulations have shown that these types of interactions affect ion energies and thereby degrade measurement performance. Here, examples of interactions between simultaneously trapped ions that have masses ranging from ca. 2 to 350 MDa and ca. 100 to 1000 charges are studied in detail using a dynamic measurement method that makes it possible to track the evolution of the mass, charge, and energy of individual ions over their trapping lifetimes. Signals from ions that have similar oscillation frequencies can have overlapping spectral leakage artifacts that result in slightly increased uncertainties in the mass determination, but these effects can be mitigated by the careful choice of parameters used in the short-time Fourier transform analysis. Energy transfers between physically interacting ions are also observed and quantified with individual ion energy measurement resolution as high as ∼950. The mass and charge of interacting ions do not change, and their corresponding measurement uncertainties are equivalent to ions that do not undergo physical interactions. Simultaneous trapping of multiple ions in CDMS can greatly decrease the acquisition time necessary to accumulate a statistically meaningful number of individual ion measurements. These results demonstrate that while ion-ion interactions can occur when multiple ions are trapped, they have negligible effects on mass accuracy when using the dynamic measurement method.

Secondary ion mass spectrometry for bone research

The purpose of this Tutorial is to highlight the suitability of time-of-flight secondary ion mass spectrometry (ToF-SIMS) and OrbiTrap™ SIMS (Orbi-SIMS) in bone research by introducing fundamentals and best practices of bone analysis with these mass spectrometric imaging (MSI) techniques. The Tutorial includes sample preparation, determination of best-suited measurement settings, data acquisition, and data evaluation, as well as a brief overview of SIMS applications in bone research in the current literature. SIMS is a powerful analytical technique that allows simultaneous analysis and visualization of mineralized and nonmineralized bone tissue, bone marrow as well as implanted biomaterials, and interfaces between bone and implants. Compared to histological staining, which is the standard analytical procedure in bone research, SIMS provides chemical imaging of nonstained bone sections that offers insights beyond what is conventionally obtained. The Tutorial highlights the versatility of ToF- and Orbi-SIMS in addressing important questions in bone research. By illustrating the value of these MSI techniques, it demonstrates how they can contribute to advance progress in bone research.

Detection of Single Ag Nanoparticles Using Laser Desorption/Ionization Mass Spectrometry

The detection of a single entity (molecule, cell, particle, etc.) was always a challenging subject. Here we demonstrate the detection of single Ag nanoparticles (NPs) using subatmospheric pressure laser desorption/ionization mass spectrometry (LDI MS). The sample preparation, measurement conditions, generated ions, and limiting experimental factors are discussed here. We detected from 84 to 95% of the deposited 80 nm Ag NPs. The presented LDI MS platform is an alternative to laser ablation inductively coupled plasma mass spectrometry for imaging distribution of individual NPs across the sample surface and has a great potential for multiplexed mapping of low-abundance biomarkers in tissues.

A Dual-Gated Structures for Lossless Ion Manipulations-Ion Mobility Orbitrap Mass Spectrometry Platform for Combined Ultra-High-Resolution Molecular Analysis

High-resolution ion mobility spectrometry-mass spectrometry (HR-IMS-MS) instruments have enormously advanced the ability to characterize complex biological mixtures. Unfortunately, HR-IMS and HR-MS measurements are typically performed independently due to mismatches in analysis time scales. Here, we overcome this limitation by using a dual-gated ion injection approach to couple an 11 m path length structures for lossless ion manipulations (SLIM) module to a Q-Exactive Plus Orbitrap MS platform. The dual-gate setup was implemented by placing one ion gate before the SLIM module and a second ion gate after the module. The dual-gated ion injection approach allowed the new SLIM-Orbitrap platform to simultaneously perform an 11 m SLIM separation, Orbitrap mass analysis using the highest selectable mass resolution setting (up to 140 k), and high-energy collision-induced dissociation (HCD) in ∼25 min over an m/z range of ∼1500 amu. The SLIM-Orbitrap platform was initially characterized using a mixture of standard phosphazene cations and demonstrated an average SLIM CCS resolving power (Rp^CCS) of ∼218 and an SLIM peak capacity of ∼156, while simultaneously obtaining high mass resolutions. SLIM-Orbitrap analysis with fragmentation was then performed on mixtures of standard peptides and two reverse peptides (SDGRG¹⁺, GRGDS¹⁺, and Rp^CCS = 305) to demonstrate the utility of combined HR-IMS-MS/MS measurements for peptide identification. Our new HR-IMS-MS/MS capability was further demonstrated by analyzing a complex lipid mixture and showcasing SLIM separations on isobaric lipids. This new SLIM-Orbitrap platform demonstrates a critical new capability for proteomics and lipidomics applications, and the high-resolution multimodal data obtained using this system establish the foundation for reference-free identification of unknown ion structures.

Estimation of dihydroartemisinin in human plasma using a highly sensitive LTQ Orbitrap mass spectrometer with Xcalibur software

Background: Artemether (ARM), the O-methyl ether prodrug of dihydroartemisinin (DHA), is considered a first-line antimalarial agent. Artemether is extensively metabolized in vivo to its active metabolite DHA, and therefore its determination offers considerable difficulties. In the present study, DHA identification and estimation were accurately performed by the mass spectrometric analysis, using a high-resolution liquid chromatography/electrospray ionization-mass spectrometry (LC/ESI-MS) LTQ Orbitrap hybrid mass spectrometer. Methods: The plasma samples were taken from healthy volunteers, and the spiked plasma was extracted by adding 1 mL of a mixture of dichloromethane and tert.-methyl butyl ether (8:2 v/v) to 0.5 mL of plasma. The internal standard solution (artemisinin 500 ng/mL) was added to the plasma samples. After vertexing and centrifugation, the organic layer was separated and transferred into another tube and dried under nitrogen. The residue was reconstituted in 100 μL of acetonitrile and was injected onto the LC-MS system for analysis. Measurement of standards and samples was carried out isocratically on a Surveyor HPLC system combined with an LTQ Orbitrap mass spectrometer using an ACE 5 C18-PFP column. Mobile phase A consisted of 0.1% v/v formic acid in water, Mobile phase B consisted of acetonitrile only, and isocratic elution was carried out with A:B 20:80, v/v. The flow rate was 500 μL/min. The ESI interface was operated in a positive ion mode with a spray voltage of 4.5 kV. Results: Artemether is not a very biologically stable compound and is immediately metabolized to its active metabolite dihydroartemisinin, so no clear peak was observed for artemether. Both artemether and DHA after ionization undergo neutral losses of methanol and water, respectively, in the source of the mass spectrometer. The ions observed were (MH-H₂O) m/z 267.15 for DHA and (MH-m/z 283.15 for internal standard artemisinin. The method was validated according to international guidelines. Discussion: The validated method was applied successfully for the determination and quantification of DHA in plasma samples. This method works well for the extraction of drugs, and the Orbitrap system with the help of Xcalibur software accurately and precisely determines the concentration of DHA in spiked as well as volunteer's plasma.

Discovering Nature's Fingerprints: Isotope Ratio Analysis on Bioanalytical Mass Spectrometers

For a generation or more, the mass spectrometry that developed at the frontier of molecular biology was worlds apart from isotope ratio mass spectrometry, a label-free approach done on optimized gas-source magnetic sector instruments. Recent studies show that electrospray-ionization Orbitraps and other mass spectrometers widely used in the life sciences can be fine-tuned for high-precision isotope ratio analysis. Since isotope patterns form everywhere in nature based on well-understood principles, intramolecular isotope measurements allow unique insights into a fascinating range of research topics. This Perspective introduces a wider readership to current topics in stable isotope research with the aim of discussing how soft-ionization mass spectrometry coupled with ultrahigh mass resolution can enable long-envisioned progress. We highlight novel prospects of observing isotopes in intact polar compounds and speculate on future directions of this adventure into the overlapping realms of biology, chemistry, and geology.

A high-throughput approach reveals distinct peptide charging behaviors in electrospray ionization mass spectrometry

Electrospray ionization is a powerful and prevalent technique used to ionize analytes in mass spectrometry. The distribution of charges that an analyte receives (charge state distribution, CSD) is an important consideration for interpreting mass spectra. However, due to an incomplete understanding of the ionization mechanism, the analyte properties that influence CSDs are not fully understood. Here, we employ a machine learning-based high-throughput approach and analyze CSDs of hundreds of thousands of peptides. Interestingly, half of the peptides exhibit charges that differ from what one would naively expect (number of basic sites). We find that these peptides can be classified into two regimes-undercharging and overcharging-and that these two regimes display markedly different charging characteristics. Strikingly, peptides in the overcharging regime show minimal dependence on basic site count, and more generally, the two regimes exhibit distinct sequence determinants. These findings highlight the rich ionization behavior of peptides and the potential of CSDs for enhancing peptide identification.

Mass spectrometry-based metabolomics for discovering active ingredients and exploring action mechanism of herbal medicine

Natural products derived from herbal medicine are a fruitful source of lead compounds because of their structural diversity and potent bioactivities. However, despite the success of active compounds derived from herbal medicine in drug discovery, some approaches cannot effectively elucidate the overall effect and action mechanism due to their multi-component complexity. Fortunately, mass spectrometry-based metabolomics has been recognized as an effective strategy for revealing the effect and discovering active components, detailed molecular mechanisms, and multiple targets of natural products. Rapid identification of lead compounds and isolation of active components from natural products would facilitate new drug development. In this context, mass spectrometry-based metabolomics has established an integrated pharmacology framework for the discovery of bioactivity-correlated constituents, target identification, and the action mechanism of herbal medicine and natural products. High-throughput functional metabolomics techniques could be used to identify natural product structure, biological activity, efficacy mechanisms, and their mode of action on biological processes, assisting bioactive lead discovery, quality control, and accelerating discovery of novel drugs. These techniques are increasingly being developed in the era of big data and use scientific language to clarify the detailed action mechanism of herbal medicine. In this paper, the analytical characteristics and application fields of several commonly used mass spectrometers are introduced, and the application of mass spectrometry in the metabolomics of traditional Chinese medicines in recent years and its active components as well as mechanism of action are also discussed.

Phytochemical-Based Evidence of the Health Benefits of Bidens Pilosa Extracts and Cytotoxicity

Purpose

Bidens pilosa L. is traditionally used as a flavouring agent in foods, in the treatment of diseases, in agriculture as a biopesticide and herbicide, and in the phytoremediation of soils contaminated with heavy metals. The vast range of uses of B. pilosa for a variety of purposes is questionable, hence motivating the objectives of this study, which are to assess the cytotoxicity, health benefits, and/or risks of B. pilosa using chemical-based evidence.

Methods

A real-time cell analysis (xCELLigence system), ultra-high-performance liquid chromatography coupled to a quadrupole-time-of-flight mass spectrometer, high-performance liquid chromatography with a diode array detector, and chemical-based spectrophotometric methods were adopted in the study.

Results

High concentrations of the ethanol extracts exhibited cytotoxic activity on HepG2 (cancerous), and Vero (non-cancerous) cell lines, whereas the water extracts promoted cell proliferation at selected concentrations. The chemical profiling enabled the separation as well as characterisation of 137 phytochemicals. These were mainly phenolic acids, flavonoids, fatty acids, coumarins, and furanocoumarins. There was no toxic compound identified.

Conclusion

The ethanol extracts are generally more potent and exhibit stronger antioxidant activity and cytotoxicity, probably due to the presence of more flavonoids and phenolic acids, validating the uses of B. pilosa and its relevance as a source of functional phytochemicals.