Ozone-initiated particle formation, particle aging, and precursors in a laser printer

"The air within: reviewing the sources and health effects of indoor air pollution in households"

Air pollution in the interior of our homes is caused by diverse chemical, physical, and biological entities. This review comprehensively explores the current understanding of sources and health impacts of gaseous and particulate pollutants. Trend analysis of indoor air research worldwide revealed a quantum jump of 2.8 times in the number of publications during the last ten years. Indoor air pollutants are innumerable, but only a few are widely prevalent in most households. The qualitative complexity of pollutants translates to different health problems, including respiratory diseases, cardiovascular conditions, cancer, and deaths. There exist wide-scale disparities in the negative impacts among different economic strata, genders, and age groups; children and elderly populations are more vulnerable. In developing countries, pollutants primarily arise from traditional sources, whereas in developed countries, pollutants from non-conventional sources are comparatively significant. Only a few countries have indoor air regulations, policies, monitoring plans and effective enforcement.

In vitro assessment of acute airway effects from real-life mixtures of ozone-initiated oxidation products of limonene and printer exhaust

In indoor air the reaction of ozone (O3) with terpenes may lead to the formation of irritating gas-phase products which may induce acute airway effects (i.e. sudden, short-term changes or symptoms related to the respiratory system). We aimed to perform an in vitro study on possible health effects of products from the O3-initiated reaction of limonene with printer exhaust, representing real-life mixtures in offices. Human bronchial epithelial cells were exposed for 1 hour (h) to limonene and O3, combined with printer exhaust. The resulting concentrations represented 34% and 6% of the generated initial concentrations of limonene (400 µg/m³) and O3 (417 µg/cm³), respectively, which were in range of high end realistic indoor concentrations. We observed that the reaction of limonene with O3 generated an increase of ultrafine particles within 1 h, with a significant increase of secondary reaction products 4-oxopentanal and 3-isopropenyl-6-oxo-heptanal at high end indoor air levels. Simultaneous printing activity caused the additional release of micron-sized particles and a further increase in reaction products. Relevant cellular endpoints to evaluate the possible induction of acute airway effects were measured. However, none of the test atmospheres representing office air was observed to induce these effects.

Impact of ozonation on the formation of particulate nitrosodi-methylamine (NDMA) in atmosphere

The contribution of ozonation to the formation of particulate nitrosodi-methylamine (NDMA) in the aqueous aerosol phase was investigated using measurement data from 2018 in Seoul, Republic of Korea and a box model. The correlation between the NDMA concentration and aerosol liquid water content and box model results showed that aqueous aerosol phase reactions, including nitrosation and ozonation, might contribute to the formation of NDMA. The concentration of NDMA and the ratio of O3/dimethylamine exhibited a negative correlation, suggesting that the contribution of ozonation to NDMA formation may not be significant. Furthermore, when the daily concentration of NDMA exceeded 10 ng/m3, the pH was 3.96 ± 0.48, indicating that the impact of ozonation on NDMA concentration might not be significant. To quantitatively investigate the contribution of ozonation, the ozonation mechanism that forms NDMA was included in the box model developed in our previous study. The model results showed that the ozonation contributed to the ambient concentration of NDMA (7.9 ± 3.8% (winter); 1.9 ± 3.0% (spring); 10.0 ± 0.77% (summer); 3.6 ± 7.3% (autumn)). It is estimated that the relatively higher O3/NOx ratio in summer (1.63 ± 0.69; 0.64 ± 0.52 (winter); 1.14 ± 0.92 (spring); 0.52 ± 0.54 (autumn)) could enhance ozonation and that relatively lower pH in summer (2.2 ± 0.4; 5.3 ± 1.2 (winter); 3.9 ± 1.2 (spring); 3.9 ± 0.7 (autumn)) could hinder nitrosation compared to that in other seasons.

Highly efficient removal of ozone by amorphous manganese oxides synthesized with a simple hydrothermal method

Amorphous manganese oxides (MnOx) were synthesized by facile hydrothermal reactions between potassium permanganate and manganese acetate. Synthesis parameters, including hydrothermal time and temperature and molar ratio of precursors, significantly affected the ozone removal performance and structure property of MnOx. Amorphous MnOx-1.5, which was prepared at the Mn2+/Mn7+ molar ratio of 1.5 under hydrothermal conditions of 120°C and 2 hr, showed the highest ozone removal rate of 93% after 480 min at the room temperature, RH (relative humidity) = 80% and WHSV (weight hourly space velocity) = 600 L/(g·hr). The morphology, composition and structure of catalysts were investigated with X-ray diffractometer (XRD), Raman spectra, N2 physisorption, field emission scanning electron microscope (FESEM), X-ray photoelectron spectroscopy (XPS), H2 temperature-programmed reduction (H2-TPR), O2 temperature-programmed desorption (O2-TPD) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS). It was confirmed that high catalytic activity of amorphous MnOx for ozone removal was mainly ascribed to its abundant oxygen vacancies, high oxygen mobility and large specific surface area.

Dopant Site Engineering on 2D Co3O4 Enables Enhanced Toluene Oxidation in a Wide Temperature Range

Development of cost-effective oxide catalysts holds the key to the removal of toluene, one of the most important volatile organic compounds. However, the catalysts follow varied working mechanisms at different reaction temperatures, posing a challenge to achieving efficient toluene removal over a wide temperature range. Here we report an agitation-assisted molten salt method, which achieves the rational doping on a two-dimensional Co3O4 catalyst and forms two different structures of active sites to enhance catalytic oxidation of toluene in specific temperature intervals, enabling a facile tandem design for working in a wide temperature range. Specifically, Co3O4 is doped with Cu at the octahedral site (Cu-Co3O4) and Zn at the tetrahedral site (Zn-Co3O4) to form CuOh-O-CoTe and ZnTe-O-CoOh structures on the surface, respectively. Mechanistic studies reveal the different working mechanisms of these two active sites toward remarkable performance enhancement at specific temperature intervals, and the improved performance derived from accelerated consumption of intermediates adsorbed on the catalyst surface. Taken together, Cu-Co3O4 and Zn-Co3O4 achieve excellent toluene purification performance over a wide temperature range. This work provides insights into the mechanism-oriented design of active sites at the atomic level.

A field investigation into the characteristics and formation mechanisms of particles during the operation of laser printers and photocopiers

Indoor particle release from toner printing equipment (TPE) is a major health concern and has received wide attention. In this study, nine printing centers were randomly selected and three working phases were simulated, namely, non-working, normal printing/copying, and heavy printing/copying. The dynamics of the ozone (O₃), volatile organic compound (VOC), and particle emissions from TPE were determined by portable detectors. Results showed that particles, VOCs, and O₃ were indeed discharged, and particles and VOCs concentrations remained at high levels. Among them, 44% of the rooms represented high-level particle releases. Submicrometer-sized particles, especially nanoparticles, were positively correlated with VOCs, but were inversely proportional to the O₃ concentration. Four elements, Ca, Al, Mg and Ni, were usually present in nanoparticles because of the discharge of paper. Si, Al, K, Ni and Pb were found in the submicrometer-sized particles and were consistent with the toner composition. The potential particle precursors were identified, which suggested that styrene was the most likely secondary organic aerosol (SOA) precursor. Overall, the use of the toner formulation and the discharge of paper attribute to the TPE-emitted particles, in which styrene is a specific monitoring indicator for the formation of SOA.

Changes in heart rate variability of healthy subjects shortly exposed to printing shop particles and the effect of air purifier intervention

Particulate matter (PM) released by printers may cause airway inflammation and cardiac electrophysiological changes. We conducted a two-stage crossover study to examine the association between short-term exposure to printing shop particles (PSPs) and the heart rate variability (HRV) among healthy volunteers, as well as to evaluate the effect of air purifier intervention. The on-site assessments of PSPs and individual HRV parameters of the volunteers were used to analyze the influence of size-fractionated PSPs and air purifier intervention on HRV at different lag times after PSPs exposure (0 min, 5 min, 15 min, and 30 min) by using the linear mixed-effects models. We observed that changes in 6 HRV parameters were associated with particle mass concentration (PMC) of PSPs, and changes in 8 HRV parameters were associated with particle number concentration (PNC) of PSPs. The sensitive HRV parameters were the square root of the mean of the sum of the squares of differences between adjacent NN intervals (rMSSD), NN50 count divided by the total number of all NN intervals (pNN50), normalized high frequency power (nHF), very high frequency power (VHF), normalized low frequency power (nLF), and the ratio of low frequency power to high frequency power (LF/HF). Most HRV parameters exhibited the strongest effect associated with PMC and PNC at a lag time of 30 min. The air purifier intervention markedly reduced the PNC and PMC of size-fractionated PSPs, enhanced 5 HRV parameters, and decreased the nLF and LF/HF. Our study suggests that short-term exposure to PSPs can affect HRV parameters, reflecting changes in cardiac autonomic nervous activity, and the use of an air purifier can reduce the concentration of PSPs and improve the autonomic nervous system activity of the exposed individuals.

Indoor ozone: Concentrations and influencing factors

Because people spend most of their time indoors, much of their exposure to ozone occurs in buildings, which are partially protective against outdoor ozone. Measurements in approximately 2000 indoor environments (residences, schools, and offices) show a central tendency for average indoor ozone concentration of 4-6 ppb and an indoor to outdoor concentration ratio of about 25%. Considerable variability in this ratio exists among buildings, as influenced by seven building-associated factors: ozone removal in mechanical ventilation systems, ozone penetration through the building envelope, air-change rates, ozone loss rate on fixed indoor surfaces, ozone loss rate on human occupants, ozone loss by homogeneous reaction with nitrogen oxides, and ozone loss by reaction with gas-phase organics. Among these, the most important are air-change rates, ozone loss rate on fixed indoor surfaces, and, in densely occupied spaces, ozone loss rate on human occupants. Although most indoor ozone originates outdoors and enters with ventilation air, indoor emission sources can materially increase indoor ozone concentrations. Mitigation technologies to reduce indoor ozone concentrations are available or are being investigated. The most mature of these technologies, activated carbon filtration of mechanical ventilation supply air, shows a high modeled health-benefit to cost ratio when applied in densely occupied spaces.

Chemical changes in thirdhand smoke associated with remediation using an ozone generator

Ozonation is a common remediation approach to eliminate odors from mold, tobacco and fire damage in buildings. Little information exists to: 1) assess its effectiveness; 2) provide guidance on operation conditions; and 3) identify potential risks associated with the presence of indoor ozone and ozonation byproducts. The goal of this study is to evaluate chemical changes in thirdhand smoke (THS) aerosols induced by high levels of ozone, in comparison with THS aerosols aged under similar conditions in the absence of ozone. Samples representing different stages of smoke aging in the absence of ozone, including freshly emitted secondhand smoke (SHS) and THS, were collected inside an 18-m3 room-sized chamber over a period of 42 h after six cigarettes were consumed. The experiments involved collection and analysis of gas phase species including volatile organic compounds (VOCs), volatile carbonyls, semivolatile organic compounds (SVOCs), and particulate matter. VOC analysis was carried out by gas chromatography/mass spectrometry with a thermal desorption inlet (TD-GC/MS), and volatile carbonyls were analyzed by on-line derivatization with dinitrophenylhydrazine (DNPH), followed by liquid chromatography with UV/VIS detection. SVOCs were extracted from XAD-coated denuders and Teflon-coated fiberglass filters in the absence of ozone. In those extracts, tobacco-specific nitrosamines (TSNAs) and other SVOCs were analyzed by gas chromatography with positive chemical ionization-triple quadrupole mass spectrometric detection (GC/PCI-QQQ-MS), and polycyclic aromatic hydrocarbons (PAHs) were quantified by gas chromatography with ion trap mass spectrometric detection (GC/IT-MS) in selected ion monitoring mode. Particulate matter concentration was determined gravimetrically. In a second experiment, a 300 mg h-1 commercial ozone generator was operated during 1 h, one day after smoke was generated, to evaluate the remediation of THS by ozonation. VOCs and volatile carbonyls were analyzed before and after ozonation. Extracts from fabrics that were exposed in the chamber before and after ozonation as surrogates for indoor furnishings were analyzed by GC/IT-MS, and aerosol size distribution was studied with a scanning mobility particle sizer. Ozone concentration was measured with a photometric detector. An estimated 175 mg ozone reacted with THS after 1 h of treatment, corresponding to 58% of the total O3 released during that period. Fabric-bound nicotine was depleted after ozonation, and the surface concentration of PAHs adsorbed to fabric specimens decreased by an order of magnitude due to reaction with ozone, reaching pre-smoking levels. These results suggest that ozonation has the potential to remove harmful THS chemicals from indoor surfaces. However, gas phase concentrations of volatile carbonyls, including formaldehyde, acetaldehyde and acetone were higher immediately after ozonation. Ultrafine particles (UFP, in most cases with size <60 nm) were a major ozonation byproduct. UFP number concentrations peaked shortly after ozonation ended, and remained at higher-than background levels for several hours. Based on these results, minimum re-entry times after ozone treatment were predicted for different indoor scenarios. Clearly defining re-entry times can serve as a practical measure to prevent acute exposures to ozone and harmful ozonation byproducts after treatment. This study evaluated potential benefits and risks associated with THS remediation using ozone, providing insights into this technology.

Exposure to BTEX concentration and the related health risk assessment in printing and copying centers

This study was derived to investigation of BTEX (benzene, toluene, ethylbenzene, xylenes) concentrations in printing and copying centers (PCCs) in Ardabil city of Iran. Fifty-three PCCs were randomly selected from all the 136 number of PCCs and BTEX was sampled form their indoor air. The results showed that the concentration of BTEX in the indoor air PCCs is lower than the OELs (occupational exposure limit) in all cases. The obtained mean concentrations of benzene, toluene, ethylbenzene, and xylene were 93.6±63.2, 150.6±99.2, 34.3±16.8, and 29.5±15.2 μg/m³ respectively. Type of printer, number of printing and copying device, and type of ventilation system had significant influence on the BTEX concentration. The mean inhalation lifetime cancer risk (LTCR) value for benzene and ethylbenzene in the indoor air of the PCCs with LaserJet and inkjet printers was 44.4 × 10^-6 and 153.3 × 10^-6, and 23.4×10^-6 and 54.2× 10^-6, respectively, which were higher than EPA (Environmental Protection Agency) and World Health Organization (WHO) recommended limits. The hazard quotient (HQ) of benzene in the indoor air of the PCCs with inkjet printers was >1, which indicates that the non-carcinogenic risks associated with exposure to these compounds are considerable.

Acute ozone exposure can cause cardiotoxicity: Mitochondria play an important role in mediating myocardial apoptosis

OBJECTIVE

To clarify the cardiotoxicity induced by acute exposure to different concentrations of ozone in both gender rats and explore the underlying mechanisms.

METHODS

A total of 240 rats were randomly sorted into 6 groups with equal numbers of male and female rats in each group. The rats were subjected to ozone inhalation at concentrations of 0, 0.12, 0.5, 1.0, 2.0 and 4.0 ppm, respectively, for 6 h. After ozone exposure, function indicators, myocardial injury indexes and risk factors of cardiovascular disease in blood were assayed.

RESULTS

High ozone exposure resulted in sustained ventricular tachycardia in male and female rats. Myocardial apoptosis in male rats started from 1.0 ppm ozone, and that in female rats started from 2.0 ppm ozone (p < 0.05). Caspase-9 increased significantly from 0.12 ppm ozone (p < 0.01) in both gender rats, while caspase-3 was initially activated at 0.5 ppm ozone. From 1.0 ppm ozone, mitochondrial cristae and myofilaments dissolved. The ratio of Bcl-2/Bax decreased significantly from 0.12 ppm and MRCC-IV decreased significantly from 2.0 ppm by ozone.

CONCLUSION

Acute ozone exposure can cause paroxysmal ventricular tachycardia in rats. Moreover, the changes of inflammatory factors in the heart tissues of female and male rats after ozone exposure were greater than those of oxidative stress. This study reported for the first time that 6 h ozone exposure does not cause acute cardiomyocyte necrosis, but promotes cardiomyocyte apoptosis in a mitochondrial-dependent manner. Ozone could regulate caspases-3 dependent cardiomyocyte apoptosis by affecting the balance between caspase-9 and XIAP.

Perinatal Exposure to Diesel Exhaust-Origin Secondary Organic Aerosol Induces Autism-Like Behavior in Rats

Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by impaired social communication, poor social interactions, and repetitive behaviors. We aimed to examine autism-like behaviors and related gene expressions in rats exposed to diesel exhaust (DE)-origin secondary organic aerosol (DE-SOA) perinatally. Sprague–Dawley pregnant rats were exposed to clean air (control), DE, and DE-SOA in the exposure chamber from gestational day 14 to postnatal day 21. Behavioral phenotypes of ASD were investigated in 10~13-week-old offspring using a three-chambered social behavior test, social dominance tube test, and marble burying test. Prefrontal cortex was collected to examine molecular analyses including neurological and immunological markers and glutamate concentration, using RT-PCR and ELISA methods. DE-SOA-exposed male and female rats showed poor sociability and social novelty preference, socially dominant behavior, and increased repetitive behavior. Serotonin receptor (5-HT(5B)) and brain-derived neurotrophic factor (BDNF) mRNAs were downregulated whereas interleukin 1 β (IL-β) and heme oxygenase 1 (HO-1) mRNAs were upregulated in the prefrontal cortex of male and female rats exposed to DE-SOA. Glutamate concentration was also increased significantly in DE-SOA-exposed male and female rats. Our results indicate that perinatal exposure to DE-SOA may induce autism-like behavior by modulating molecules such as neurological and immunological markers in rats.

Health effects of occupational exposure to printer emissions on workers in China: Cardiopulmonary function change

Printers emitted nanoparticles (NPs), ozone (O₃) and volatile organic chemicals (VOCs) during operation that elicited adverse effects on indoor air quality of the printing room, which may affect the health of exposed workers. The aim of this work was to explore the health effects of occupational exposure to printer emissions on workers, especially cardiovascular and lung function. We sampled particles in the print shop for characterization, including particle size distribution and elemental composition, and measured PM₁ number concentrations in print shops and other workplaces. We assessed blood pressure, heart rate and pulmonary function in 53 printing room workers and 54 controls in Beijing, China. Multiple linear regression analysis were used to examine health effects of exposure to printer emissions. The PM₁ number concentration in the print shop was more than 2 times that of the control group. Compared with controls, the exposed workers with lower education and income had heavier workload with a median of 7 days per week and 12 h per day on working days, and presented cardiopulmonary function injury with increased the diastolic blood pressure (DBP), systolic blood pressure (SBP), and mean arterial pressure (MAP). The most significant changes of cardiopulmonary function were found in exposed workers with more than 10 years of working age. Multiple linear regression also showed printer emissions exposure was associated with increased SBP and MAP, while decreased lung function indices. This study found changes in the cardiopulmonary function of staff members exposed to printer emissions, which prompted the necessity and urgency of improving the environment of printing rooms and protecting the health of exposed workers.

Review of the characteristics and possible health effects of particles emitted from laser printing devices

Many studies have shown that the use of laser printing devices (LPDs) contributes to the release of particles into the indoor environment. However, after more than two decades of research, the physicochemical properties of LPD-emitted particles and the possible health effects from exposure to particles are still heavily debated. We therefore carried out a critical review of the published studies around emissions and health effects of LPD-emitted particles, aiming at elucidating the nature of these particles and their potential health risks. Realizing the varying methodologies of the studies, a classification of the reviewed studies is adopted, resulting in three categories of emission studies (chamber experiment, office/room measurement, and photocopy shop measurement), and three types of health studies (in vitro/animal studies, human studies in the real world, and human studies in controlled settings). The strengths and limitations of each type of study are discussed in-depth, which in turn helps to understand the cause of divergent results. Overall, LPD-emitted particles are mainly condensed or secondary-formed semi-volatile organic compounds (SVOCs), while solid toner particles account for a very small fraction. The health risk from exposure to LPD-emitted particles is small compared with the health risk from exposure to ambient particles.

Real-Time Ozone Sensor Based on Selective Oxidation of Methylene Blue in Mesoporous Silica Films

Sensitive and selective personal exposure monitors are needed to assess ozone (O3) concentrations in the workplace atmosphere in real time for the analysis and prevention of health risks. Here, a cumulative gas sensor using visible spectroscopy for real-time O3 determination is described. The sensing chip is a mesoporous silica thin film deposited on transparent glass and impregnated with methylene blue (MB). The sensor is reproducible, stable for at least 50 days, sensitive to 10 ppb O3 (one-tenth of the occupational exposure limit value in France, Swiss, Canada, U.K., Japan, and the USA) with a measurement range tested up to 500 ppb, and insensitive to NO2 and to large variation in relative humidity. A model and its derivative as a function of time are proposed to convert in real time the sensor response to concentrations, and an excellent correlation was obtained between those data and reference O3 concentrations. This sensor is based on a relatively cheap sensing material and a robust detection system, and its analytical performance makes it suitable for monitoring real-time O3 concentrations in workplaces to promote a safer environment for workers.

Assessment of environmental and ergonomic hazard associated to printing and photocopying: a review

"Knowledge is power" and distribution of knowledge is fueled by printing and photocopying industry. Even as printing and photocopying industry have revolutionized the availability of documents and perceptible image quickly at extremely inexpensive and affordable cost, the boon of its revolution has turned into a bane by irresponsible, uncontrolled and extensive use, causing irreversible degradation to not only ecosystem by continuous release of ozone and other volatile organic compounds (VOCs) but also the health of workers occupationally exposed to it. Indoor ozone level due to emission from different photocopying equipment's increases drastically and the condition of other air quality parameters are not different. This situation is particularly sedate in extremely sensitive educational and research industry where sharing of knowledge is extremely important to meet the demands. This work is an attempt to catalogue all the environmental as well as health impacts of printing or photocopying. It has been observed that printing/photocopying operation is a significant factor contributing to indoor air quality degradation, which includes increase in concentration of ozone, VOCs, semi-volatile organic compounds (SVOCs) and heavy metals such as cadmium, selenium, arsenic, zinc, nickel, and other pollutants from photocopy machines. The outcome of this study will empower the manufactures with information regarding ozone and other significant emission, so that their impact can be reduced.

Limited developmental neurotoxicity from neonatal inhalation exposure to diesel exhaust particles in C57BL/6 mice

Background

Recent epidemiological studies indicate early-life exposure to pollution particulate is associated with adverse neurodevelopmental outcomes. The need is arising to evaluate the risks conferred by individual components and sources of air pollution to provide a framework for the regulation of the most relevant components for public health protection. Previous studies in rodent models have shown diesel particulate matter has neurotoxic potential and could be a health concern for neurodevelopment. The present study shows an evaluation of pathological and protracted behavioral alterations following neonatal exposure to aerosolized diesel exhaust particles (NIST SRM 1650b). The particular behavioral focus was on temporal control learning, a broad and fundamental cognitive domain in which reward delivery is contingent on a fixed interval schedule. For this purpose, C57BL/6 J mice were exposed to aerosolized NIST SRM 1650b, a well-characterized diesel particulate material, from postnatal days 4–7 and 10–13, for four hours per day. Pathological features, including glial fibrillary-acidic protein, myelin basic protein expression in the corpus callosum, and ventriculomegaly, as well as learning alterations were measured to determine the extent to which NIST SRM 1650b would induce developmental neurotoxicity.

Results

Twenty-four hours following exposure significant increases in glial-fibrillary acidic protein (GFAP) in the corpus callosum and cortex of exposed male mice were present. Additionally, the body weights of juvenile and early adult diesel particle exposed males were lower than controls, although the difference was not statistically significant. No treatment-related differences in males or females on overall locomotor activity or temporal learning during adulthood were observed in response to diesel particulate exposure.

Conclusion

While some sex and regional-specific pathological alterations in GFAP immunoreactivity suggestive of an inflammatory reaction to SRM 1650b were observed, the lack of protracted behavioral and pathological deficits suggests further clarity is needed on the developmental effects of diesel emissions prior to enacting regulatory guidelines.

Electronic supplementary material

The online version of this article (10.1186/s12989-018-0287-8) contains supplementary material, which is available to authorized users.

Oxygen Vacancies Induced by Transition Metal Doping in γ-MnO2 for Highly Efficient Ozone Decomposition

Transition metal (cerium and cobalt) doped γ-MnO₂ (M-γ-MnO₂, where M represents Ce, Co) catalysts were successfully synthesized and characterized. Cerium-doped γ-MnO₂ materials showed ozone (O₃) conversion of 96% for 40 ppm of O₃ under relative humidity (RH) of 65% and space velocity of 840 L g^-1 h^-1 after 6 h at room temperature, which is far superior to the performance of the Co-γ-MnO₂ (55%) and γ-MnO₂ (38%) catalysts. Under space velocity of 840 L g^-1 h^-1, the conversion of ozone over the Ce-γ-MnO₂ catalyst under RH = 65% and dry conditions within 96 h was 60% and 100%, respectively, indicating that it is a promising material for ozone decomposition. XRD and HRTEM data suggested that Ce-γ-MnO₂ formed mixed crystals consisting of α-MnO₂ and γ-MnO₂ with specific surface area increased from 74 m²/g to 120 m²/g compared to undoped γ-MnO₂, thus more surface defects were introduced. H₂-TPR, O₂-TPD, XPS, Raman, and EXAFS confirmed that Ce-γ-MnO₂ exhibited more surface oxygen vacancies and surface defects, which play a key role during the decomposition of ozone. This study provides important insights for developing improved catalysts for gaseous ozone decomposition and promoting the performance of manganese oxide for practical ozone elimination.

Assessment of the inhalation risks associated with working in printing rooms: a study on the staff of eight printing rooms in Beijing, China

The concentration of pollution directly determines the occupational health risk, and the exposure time is an important influencing factor. We evaluated the inhalation risks of working in a printing room. Eight units with centralized printing rooms were randomly selected. Formaldehyde, ozone, benzene, toluene, xylene, and fine particulate matter were detected by spectrophotometry, gas chromatography, and direct reading instruments, respectively. The U.S. EPA inhalation risk assessment model was used to assess cancer and non-cancer risks. The formaldehyde inhalation cancer risk value was 1.35-3.45 × 10^-6, which is greater than the limit of 1 × 10^-6, suggesting a risk of squamous cell carcinoma. The benzene inhalation cancer risk in five of the rooms was 1.09-4.65 × 10^-6, which is greater than the limit of 1 × 10^-6, suggesting a risk of leukemia. In terms of non-cancer risk, in five of the rooms, the hazard quotient (HQ) was > 1 (range 1.99-4.69) due to benzene pollution, suggesting a risk of reduced lymphocyte count. In one room, due to benzene and xylene pollution, the HQ was > 1, suggesting a risk of lymphocyte count drop and motor coordination impairment. Collectively, the study concludes that staff members of printing rooms are exposed to both cancer and non-cancer occupational health risks.

Evaluation of nanoparticle emissions from a laser printer in an experimental chamber and estimation of the human particle dose

The aim of this study was to evaluate the nanoparticle emissions from a laser printer in a chamber in conjunction with emissions from printers in a print room (PR) and to characterize the processes that lead to increased nanoparticle concentrations, as well as to estimate the human particle dose of the printers' users. Measurements were conducted in a small stainless steel environmental chamber under controlled conditions, where the evolution of particle size distributions (PSDs) with time and printed pages was studied in detail. Printer was generating nanoparticles (vast majority ˂ 50 nm with mode on ~ 15 nm) primarily during cold startup. Previously, 1-week sampling was also done in a PR at the Technical University of Crete, where the tested laser printer is installed along with three other printers. Similarly, as it was observed in the chamber study, printers' startup on any given day was characterized by a sharp increase in particle number (PN) concentrations. Average measured PN concentrations during printing hours in PR (5.4 × 10³ #/cm³) is similar to the one observed in chamber measurements (6.7 × 10³ #/cm³). The ExDoM2 dosimetry model was further applied to calculate the deposition of particles in the human respiratory tract. More precisely, the increase in particle dose for an adult Caucasian male was 14.6- and 24.1-fold at printers' startup, and 1.2- and 5.2-fold during printing in the PR and experimental chamber, respectively, compared to the exposure dose at background concentrations (BCs).

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer

Printing devices are known to emit chemicals into the indoor atmosphere. Understanding factors that influence release of chemical contaminants from printers is necessary to develop effective exposure assessment and control strategies. In this study, a desktop fused deposition modeling (FDM) 3-dimensional (3-D) printer using acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA) filaments and two monochrome laser printers were evaluated in a 0.5 m3 chamber. During printing, chamber air was monitored for vapors using a real-time photoionization detector (results expressed as isobutylene equivalents) to measure total volatile organic compound (TVOC) concentrations, evacuated canisters to identify specific VOCs by off-line gas chromatography-mass spectrometry (GC-MS) analysis, and liquid bubblers to identify carbonyl compounds by GC-MS. Airborne particles were collected on filters for off-line analysis using scanning electron microscopy with an energy dispersive x-ray detector to identify elemental constituents. For 3-D printing, TVOC emission rates were influenced by a printer malfunction, filament type, and to a lesser extent, by filament color; however, rates were not influenced by the number of printer nozzles used or the manufacturer's provided cover. TVOC emission rates were significantly lower for the 3-D printer (49-3552 µg h-1) compared to the laser printers (5782-7735 µg h-1). A total of 14 VOCs were identified during 3-D printing that were not present during laser printing. 3-D printed objects continued to off-gas styrene, indicating potential for continued exposure after the print job is completed. Carbonyl reaction products were likely formed from emissions of the 3-D printer, including 4-oxopentanal. Ultrafine particles generated by the 3-D printer using ABS and a laser printer contained chromium. Consideration of the factors that influenced the release of chemical contaminants (including known and suspected asthmagens such as styrene and 4-oxopentanal) from a FDM 3-D printer should be made when designing exposure assessment and control strategies.

Nanoparticle exposures from nano-enabled toner-based printing equipment and human health: state of science and future research needs

Toner formulations used by laser printers (LP) and photocopiers (PC), collectively called "toner-based printing equipment" (TPE), are nano-enabled products (NEP) because they contain several engineered nanomaterials (ENM) that improve toner performance. It has been shown that during consumer use (printing), these ENM are released in the air, together with other semi-volatile organic nanoparticles, and newly formed gaseous co-pollutants such as volatile organic compounds (VOC). The aim of this review is to detail and analyze physico-chemical and morphological (PCM), as well as the toxicological properties of particulate matter (PM) emissions from TPE. The review covers evolution of science since the early 2000, when this printing technology first became a subject of public interest, as well as the lagging regulatory framework around it. Important studies that have significantly changed our understanding of these exposures are also highlighted. The review continues with a critical appraisal of the most up-to-date cellular, animal and human toxicological evidence on the potential adverse human health effects of PM emitted from TPE. We highlight several limitations of existing studies, including (i) use of high and often unrealistic doses in vitro or in vivo; (ii) unrealistically high-dose rates in intratracheal instillation studies; (iii) improper use of toners as surrogate for emitted nanoparticles; (iv) lack of or inadequate PCM characterization of exposures; and (v) lack of dosimetry considerations in in vitro studies. Presently, there is compelling evidence that the PM_0.1 from TPE are biologically active and capable of inducing oxidative stress in vitro and in vivo, respiratory tract inflammation in vivo (in rats) and in humans, several endpoints of cellular injury in monocultures and co-cultures, including moderate epigenetic modifications in vitro. In humans, limited epidemiological studies report typically 2-3 times higher prevalence of chronic cough, wheezing, nasal blockage, excessive sputum production, breathing difficulties, and shortness of breath, in copier operators relative to controls. Such symptoms can be exacerbated during chronic exposures, and in individuals susceptible to inhaled pollutants. Thus respiratory, immunological, cardiovascular, and other disorders may be developed following such exposures; however, further toxicological and larger scale molecular epidemiological studies must be done to fully understand the mechanism of action of these TPE emitted nanoparticles. Major research gaps have also been identified. Among them, a methodical risk assessment based on "real world" exposures rather than on the toner particles alone needs to be performed to provide the much-needed data to establish regulatory guidelines protective of individuals exposed to TPE emissions at both the occupational and consumer level. Industry-wide molecular epidemiology as well as mechanistic animal and human studies are also urgently needed.

Indoor inhalation intake fractions of fine particulate matter: review of influencing factors

Exposure to fine particulate matter (PM_2.5 ) is a major contributor to the global human disease burden. The indoor environment is of particular importance when considering the health effects associated with PM_2.5 exposures because people spend the majority of their time indoors and PM_2.5 exposures per unit mass emitted indoors are two to three orders of magnitude larger than exposures to outdoor emissions. Variability in indoor PM_2.5 intake fraction (iF_in,total ), which is defined as the integrated cumulative intake of PM_2.5 per unit of emission, is driven by a combination of building-specific, human-specific, and pollutant-specific factors. Due to a limited availability of data characterizing these factors, however, indoor emissions and intake of PM_2.5 are not commonly considered when evaluating the environmental performance of product life cycles. With the aim of addressing this barrier, a literature review was conducted and data characterizing factors influencing iF_in,total were compiled. In addition to providing data for the calculation of iF_in,total in various indoor environments and for a range of geographic regions, this paper discusses remaining limitations to the incorporation of PM_2.5 -derived health impacts into life cycle assessments and makes recommendations regarding future research.

Effects of Laser Printer-Emitted Engineered Nanoparticles on Cytotoxicity, Chemokine Expression, Reactive Oxygen Species, DNA Methylation, and DNA Damage: A Comprehensive in Vitro Analysis in Human Small Airway Epithelial Cells, Macrophages, and Lymphoblasts

BACKGROUND

Engineered nanomaterials (ENMs) incorporated into toner formulations of printing equipment become airborne during consumer use. Although information on the complex physicochemical and toxicological properties of both toner powders and printer-emitted particles (PEPs) continues to grow, most toxicological studies have not used the actual PEPs but rather have primarily used raw toner powders, which are not representative of current exposures experienced at the consumer level during printing.

OBJECTIVES

We assessed the biological responses of a panel of human cell lines to PEPs.

METHODS

Three physiologically relevant cell lines--small airway epithelial cells (SAECs), macrophages (THP-1 cells), and lymphoblasts (TK6 cells)--were exposed to PEPs at a wide range of doses (0.5-100 μg/mL) corresponding to human inhalation exposure durations at the consumer level of 8 hr or more. Following treatment, toxicological parameters reflecting distinct mechanisms were evaluated.

RESULTS

PEPs caused significant membrane integrity damage, an increase in reactive oxygen species (ROS) production, and an increase in pro-inflammatory cytokine release in different cell lines at doses equivalent to exposure durations from 7.8 to 1,500 hr. Furthermore, there were differences in methylation patterns that, although not statistically significant, demonstrate the potential effects of PEPs on the overall epigenome following exposure.

CONCLUSIONS

The in vitro findings obtained in this study suggest that laser printer-emitted engineered nanoparticles may be deleterious to lung cells and provide preliminary evidence of epigenetic modifications that might translate to pulmonary disorders.

Exposure of BALB/c Mice to Diesel Engine Exhaust Origin Secondary Organic Aerosol (DE-SOA) during the Developmental Stages Impairs the Social Behavior in Adult Life of the Males

Secondary organic aerosol (SOA) is a component of particulate matter (PM) 2.5 and formed in the atmosphere by oxidation of volatile organic compounds. Recently, we have reported that inhalation exposure to diesel engine exhaust (DE) originated SOA (DE-SOA) affect novel object recognition ability and impair maternal behavior in adult mice. However, it is not clear whether early life exposure to SOA during the developmental stages affect social behavior in adult life or not. In the present study, to investigate the effects of early life exposure to DE-SOA during the gestational and lactation stages on the social behavior in the adult life, BALB/c mice were exposed to clean air (control), DE, DE-SOA and gas without any PM in the inhalation chambers from gestational day 14 to postnatal day 21 for 5 h a day and 5 days per week. Then adult mice were examined for changes in their social behavior at the age of 13 week by a sociability and social novelty preference, social interaction with a juvenile mouse and light-dark transition test, hypothalamic mRNA expression levels of social behavior-related genes, estrogen receptor-alpha and oxytocin receptor as well as of the oxidative stress marker gene, heme oxygenase (HO)-1 by real-time RT-PCR method. In addition, hypothalamic level of neuronal excitatory marker, glutamate was determined by ELISA method. We observed that sociability and social novelty preference as well as social interaction were remarkably impaired, expression levels of estrogen receptor-alpha, oxytocin receptor mRNAs were significantly decreased, expression levels of HO-1 mRNAs and glutamate levels were significantly increased in adult male mice exposed to DE-SOA compared to the control ones. Findings of this study indicate early life exposure of BALB/c mice to DE-SOA may affect their late-onset hypothalamic expression of social behavior related genes, trigger neurotoxicity and impair social behavior in the males.

Effects of intratracheally instilled laser printer-emitted engineered nanoparticles in a mouse model: A case study of toxicological implications from nanomaterials released during consumer use

Incorporation of engineered nanomaterials (ENMs) into toners used in laser printers has led to countless quality and performance improvements. However, the release of ENMs during printing (consumer use) has raised concerns about their potential adverse health effects. The aim of this study was to use "real world" printer-emitted particles (PEPs), rather than raw toner powder, and assess the pulmonary responses following exposure by intratracheal instillation. Nine-week old male Balb/c mice were exposed to various doses of PEPs (0.5, 2.5 and 5 mg/kg body weight) by intratracheal instillation. These exposure doses are comparable to real world human inhalation exposures ranging from 13.7 to 141.9 h of printing. Toxicological parameters reflecting distinct mechanisms of action were evaluated, including lung membrane integrity, inflammation and regulation of DNA methylation patterns. Results from this in vivo toxicological analysis showed that while intratracheal instillation of PEPs caused no changes in the lung membrane integrity, there was a pulmonary immune response, indicated by an elevation in neutrophil and macrophage percentage over the vehicle control and low dose PEPs groups. Additionally, exposure to PEPs upregulated expression of the Ccl5 (Rantes), Nos1 and Ucp2 genes in the murine lung tissue and modified components of the DNA methylation machinery (Dnmt3a) and expression of transposable element (TE) LINE-1 compared to the control group. These genes are involved in both the repair process from oxidative damage and the initiation of immune responses to foreign pathogens. The results are in agreement with findings from previous in vitro cellular studies and suggest that PEPs may cause immune responses in addition to modifications in gene expression in the murine lung at doses that can be comparable to real world exposure scenarios, thereby raising concerns of deleterious health effects.

Atmospheric Oxidation of Squalene: Molecular Study Using COBRA Modeling and High-Resolution Mass Spectrometry

Squalene is a major component of skin and plant surface lipids and is known to be present at high concentrations in indoor dust. Its high reactivity toward ozone makes it an important ozone sink and a natural protectant against atmospheric oxidizing agents. While the volatile products of squalene ozonolysis are known, the condensed-phase products have not been characterized. We present an analysis of condensed-phase products resulting from an extensive oxidation of squalene by ozone probed by electrospray ionization (ESI) high-resolution mass spectrometry (HR-MS). A complex distribution of nearly 1300 peaks assignable to molecular formulas is observed in direct infusion positive ion mode ESI mass spectra. The distribution of peaks in the mass spectra suggests that there are extensive cross-coupling reactions between hydroxy-carbonyl products of squalene ozonolysis. To get additional insights into the mechanism, we apply a Computational Brewing Application (COBRA) to simulate the oxidation of squalene in the presence of ozone, and compare predicted results with those observed by the HR-MS experiments. The system predicts over one billion molecular structures between 0 and 1450 Da, which correspond to about 27 000 distinct elemental formulas. Over 83% of the squalene oxidation products inferred from the mass spectrometry data are matched by the simulation. The simulation indicates a prevalence of peroxy groups, with hydroxyl and ether groups being the second-most important O-containing functional groups formed during squalene oxidation. These highly oxidized products of squalene ozonolysis may accumulate on indoor dust and surfaces and contribute to their redox capacity.

Nano-Sized Secondary Organic Aerosol of Diesel Engine Exhaust Origin Impairs Olfactory-Based Spatial Learning Performance in Preweaning Mice

The aims of our present study were to establish a novel olfactory-based spatial learning test and to examine the effects of exposure to nano-sized diesel exhaust-origin secondary organic aerosol (SOA), a model environmental pollutant, on the learning performance in preweaning mice. Pregnant BALB/c mice were exposed to clean air, diesel exhaust (DE), or DE-origin SOA (DE-SOA) from gestational day 14 to postnatal day (PND) 10 in exposure chambers. On PND 11, the preweaning mice were examined by the olfactory-based spatial learning test. After completion of the spatial learning test, the hippocampus from each mouse was removed and examined for the expressions of neurological and immunological markers using real-time RT-PCR. In the test phase of the study, the mice exposed to DE or DE-SOA took a longer time to reach the target as compared to the control mice. The expression levels of neurological markers such as the N-methyl-d-aspartate (NMDA) receptor subunits NR1 and NR2B, and of immunological markers such as TNF-α, COX2, and Iba1 were significantly increased in the hippocampi of the DE-SOA-exposed preweaning mice as compared to the control mice. Our results indicate that DE-SOA exposure in utero and in the neonatal period may affect the olfactory-based spatial learning behavior in preweaning mice by modulating the expressions of memory function–related pathway genes and inflammatory markers in the hippocampus.

Development and characterization of an exposure platform suitable for physico-chemical, morphological and toxicological characterization of printer-emitted particles (PEPs)

An association between laser printer use and emissions of particulate matter (PM), ozone and volatile organic compounds has been reported in recent studies. However, the detailed physico-chemical, morphological and toxicological characterization of these printer-emitted particles (PEPs) and possible incorporation of engineered nanomaterials into toner formulations remain largely unknown. In this study, a printer exposure generation system suitable for the physico-chemical, morphological, and toxicological characterization of PEPs was developed and used to assess the properties of PEPs from the use of commercially available laser printers. The system consists of a glovebox type environmental chamber for uninterrupted printer operation, real-time and time-integrated particle sampling instrumentation for the size fractionation and sampling of PEPs and an exposure chamber for inhalation toxicological studies. Eleven commonly used laser printers were evaluated and ranked based on their PM emission profiles. Results show PM peak emissions are brand independent and varied between 3000 to 1 300 000 particles/cm³, with modal diameters ranging from 49 to 208 nm, with the majority of PEPs in the nanoscale (<100 nm) size. Furthermore, it was shown that PEPs can be affected by certain operational parameters and printing conditions. The release of nanoscale particles from a nano-enabled product (printer toner) raises questions about health implications to users. The presented PEGS platform will help in assessing the toxicological profile of PEPs and the link to the physico-chemical and morphological properties of emitted PM and toner formulations.

Consumer exposures to laser printer-emitted engineered nanoparticles: A case study of life-cycle implications from nano-enabled products

It is well established that printers emit nanoparticles during their operation. To-date, however, the physicochemical and toxicological characterization of "real world" printer-emitted nanoparticles (PEPs) remains incomplete, hampering proper risk assessment efforts. Here, we investigate our earlier hypothesis that engineered nanomaterials (ENMs) are used in toners and ENMs are released during printing (consumer use). Furthermore, we conduct a detailed physicochemical and morphological characterization of PEPs in support of ongoing toxicological assessment. A comprehensive suite of state of the art analytical methods and tools was employed for the physicochemical and morphological characterization of 11 toners widely utilized in printers from major printer manufacturers and their PEPs. We confirmed that a number of ENMs incorporated into toner formulations (e.g. silica, alumina, titania, iron oxide, zinc oxide, copper oxide, cerium oxide, carbon black among others) and released into the air during printing. All evaluated toners contained large amounts of organic carbon (OC, 42-89%), metals/metal oxides (1-33%), and some elemental carbon (EC, 0.33-12%). The PEPs possess a composition similar to that of toner and contained 50-90% OC, 0.001-0.5% EC and 1-3% metals. While the chemistry of the PEPs generally reflected that of their toners, considerable differences are documented indicative of potential transformations taking place during consumer use (printing). We conclude that: (i) Routine incorporation of ENMs in toners classifies them as nano-enabled products (NEPs); (ii) These ENMs become airborne during printing; (iii) The chemistry of PEPs is complex and it reflects that of the toner and paper. This work highlights the importance of understanding life-cycle (LC) nano-EHS implications of NEPs and assessing real world exposures and associated toxicological properties rather than focusing on "raw" materials used in the synthesis of an NEP.

Small airway epithelial cells exposure to printer-emitted engineered nanoparticles induces cellular effects on human microvascular endothelial cells in an alveolar-capillary co-culture model

The printer is one of the most common office equipment. Recently, it was reported that toner formulations for printing equipment constitute nano-enabled products (NEPs) and contain engineered nanomaterials (ENMs) that become airborne during printing. To date, insufficient research has been performed to understand the potential toxicological properties of printer-emitted particles (PEPs) with several studies using bulk toner particles as test particles. These studies demonstrated the ability of toner particles to cause chronic inflammation and fibrosis in animal models. However, the toxicological implications of inhalation exposures to ENMs emitted from laser printing equipment remain largely unknown. The present study investigates the toxicological effects of PEPs using an in vitro alveolar-capillary co-culture model with Human Small Airway Epithelial Cells (SAEC) and Human Microvascular Endothelial Cells (HMVEC). Our data demonstrate that direct exposure of SAEC to low concentrations of PEPs (0.5 and 1.0 µg/mL) caused morphological changes of actin remodeling and gap formations within the endothelial monolayer. Furthermore, increased production of reactive oxygen species (ROS) and angiogenesis were observed in the HMVEC. Analysis of cytokine and chemokine levels demonstrates that interleukin (IL)-6 and MCP-1 may play a major role in the cellular communication observed between SAEC and HMVEC and the resultant responses in HMVEC. These data indicate that PEPs at low, non-cytotoxic exposure levels are bioactive and affect cellular responses in an alveolar-capillary co-culture model, which raises concerns for potential adverse health effects.

Effects of diesel engine exhaust origin secondary organic aerosols on novel object recognition ability and maternal behavior in BALB/c mice

Epidemiological studies have reported an increased risk of cardiopulmonary and lung cancer mortality associated with increasing exposure to air pollution. Ambient particulate matter consists of primary particles emitted directly from diesel engine vehicles and secondary organic aerosols (SOAs) are formed by oxidative reaction of the ultrafine particle components of diesel exhaust (DE) in the atmosphere. However, little is known about the relationship between exposure to SOA and central nervous system functions. Recently, we have reported that an acute single intranasal instillation of SOA may induce inflammatory response in lung, but not in brain of adult mice. To clarify the whole body exposure effects of SOA on central nervous system functions, we first created inhalation chambers for diesel exhaust origin secondary organic aerosols (DE-SOAs) produced by oxidation of diesel exhaust particles caused by adding ozone. Male BALB/c mice were exposed to clean air (control), DE and DE-SOA in inhalation chambers for one or three months (5 h/day, 5 days/week) and were examined for memory function using a novel object recognition test and for memory function-related gene expressions in the hippocampus by real-time RT-PCR. Moreover, female mice exposed to DE-SOA for one month were mated and maternal behaviors and the related gene expressions in the hypothalamus examined. Novel object recognition ability and N-methyl-D-aspartate (NMDA) receptor expression in the hippocampus were affected in male mice exposed to DE-SOA. Furthermore, a tendency to decrease maternal performance and significantly decreased expression levels of estrogen receptor (ER)-α, and oxytocin receptor were found in DE-SOA exposed dams compared with the control. This is the first study of this type and our results suggest that the constituents of DE-SOA may be associated with memory function and maternal performance based on the impaired gene expressions in the hippocampus and hypothalamus, respectively.

Indoor air characterization of various microenvironments in the Arctic. The case of Tromsø, Norway

The present pilot study monitored for the first time volatile organic compounds (VOCs) and aerosols in domestic and occupational microenvironments in the Arctic Region. Differences between the two categories of samples are noted with domestic environments exhibiting higher concentrations of VOCs (total VOCs ranging between 106 and 584 μg m(-3)), while total particulate matter was highest in workplace non-office environments (ranging between 132 and 284 μg m(-3)). The terpenes were the most abundant class of VOCs, while a variety of other compounds exhibited 100% frequency of occurrence (i.e. naphthalene, D5-volatile methyl siloxane). Compared to results from other studies/regions, the concentrations of VOCs are considered as relatively low. Based on the results and the knowledge of the typical characteristics of the Arctic lifestyle, some important sources are identified. As this is the first study that deals with indoor air quality in the coldest region globally, it is expected that it will trigger the interest of Authorities to proceed to more detailed studies.

Application of proton-transfer-reaction-mass-spectrometry for Indoor Air Quality research

In the field of Indoor Air Quality research, the measurement of volatile organic compounds (VOCs) demands instruments that are rapid, mobile, robust, highly sensitive and allow for simultaneous monitoring of multiple compounds. These instruments should also compensate for possible interferences from permanent gases and air humidity. Proton-transfer-reaction-mass-spectrometry (PTR-MS) has proved to be a valuable and promising technique that fits the mentioned requirements for a suitable online measuring device. In this study, five exemplary applications of PTR-MS are described: (i) release of paint additives during drying process, (ii) emission of VOCs from active hardcopy devices, (iii) reference material evaluation, (iv) diffusion studies, and (v) emission testing of building products. The examples are selected to illustrate possibilities and limitations of the PTR technique in this field of research. The quadruple-based PTR-QMS was able to determine the emission characteristics during the experiments, especially in case of depleting emission sources (e.g., reference material). This allows for chemometrical analysis of the measured release patterns and detection of underlying processes. However, PTR-QMS reaches a functional limit in case of compound identification. If identification of VOCs is necessary, the measurements need to be accompanied by GC/MS analytics or a PTR instrument with higher mass-resolution (e.g., PTR-TOF-MS).

ATR-IR study of ozone initiated heterogeneous oxidation of squalene in an indoor environment

There has been a surge of interest in interfacial ozone chemistry for its application in indoor air quality and public health. Squalene, one of the most abundant ozone reactive constituents in an indoor environment, has received increasing attention lately, and a number of studies have been devoted to its heterogeneous interaction with ozone in actual and simulated settings. At present, there is still a large discrepancy in the measurement of the reactive uptake coefficient of ozone onto a squalene surface, and knowledge about this system remains incomplete. In this work, we investigated the ozone initiated heterogeneous oxidation of squalene using attenuated total reflection infrared spectroscopy (ATR-IR). We measured pseudo-first-order rate constants and uptake coefficients based on time dependent absorbance changes in C═C (1668 cm(-1)) and C═O (1730 cm(-1)) vibration bands. The uptake coefficients are (1.7 ± 0.2) × 10(-4) from the C═C band and (5.1 ± 0.7) × 10(-4) from the C═O band. The latter is likely an upper limit of reaction probability for ozone uptake onto squalene. Studies of temperature (5-32 °C) and relative humidity (0 and 80% RH) dependence revealed that indoor temperatures and RHs did not affect reaction kinetics. The insignificant RH effect is probably due to the weak interaction between water and squalene molecules. We quantitatively characterized the hydrophilicity and redox activity of squalene before and after exposure to ozone for the first time, and observed considerable enhancements in both hydrophilicity and redox activity during reaction. This may imply that ozone initiated heterogeneous oxidation could pose a higher public health risk in an indoor environment, and it may help explain some of the adverse health effects associated with elevated indoor pollutants.

Indoor secondary organic aerosol formation initiated from reactions between ozone and surface-sorbed D-limonene

Reactions between ozone and terpenoids produce numerous products, some of which may form secondary organic aerosol (SOA). This work investigated the contribution to gas-phase SOA formation of ozone reactions with surface-sorbed D-limonene, which is common indoors. A model framework was developed to predict SOA mass formation because of ozone/terpenoid surface reactions, and it was used with steady state experiments in a 283 L chamber to determine the aerosol mass fraction of SOA resulting from surface reactions, ξs (the ratio of mass of SOA formed and mass of ozone consumed by ozone/terpenoid surface reactions), for ozone/D-limonene reactions on stainless steel. The ξs = 0.70-0.91, with lower relative humidity leading to both higher mass and number formation. Also, surface reactions promoted nucleation more than gas-phase reactions, and number formation due to surface reactions and gas-phase reactions were 126-339 and 51.1-60.2 no./cm(3) per μg/m(3) of formed SOA, respectively. We also used the model framework to predict that indoor spaces in which ozone/D-limonene surface reactions would likely lead to meaningful gas-phase SOA formation are those with surfaces that have low original reactivity with ozone, such as glass, sealed materials, or smooth metals.

Impact of human presence on secondary organic aerosols derived from ozone-initiated chemistry in a simulated office environment

Several studies have documented reductions in indoor ozone levels that occur as a consequence of its reactions with the exposed skin, hair and clothing of human occupants. One would anticipate that consumption of ozone via such reactions would impact co-occurring products derived from ozone's reactions with various indoor pollutants. The present study examines this possibility for secondary organic aerosols (SOA) derived from ozone-initiated chemistry with limonene, a commonly occurring indoor terpene. The experiments were conducted at realistic ozone and limonene concentrations in a 240 m(3) chamber configured to simulate a typical open office environment. During an experiment the chamber was either unoccupied or occupied with 18-20 workers. Ozone and particle levels were continuously monitored using a UV photometric ozone analyzer and a fast mobility particle sizer (FMPS), respectively. Under otherwise identical conditions, when workers were present in the simulated office the ozone concentrations were approximately two-thirds and the SOA mass concentrations were approximately one-half of those measured when the office was unoccupied. This was observed whether new or used filters were present in the air handling system. These results illustrate the importance of accounting for occupancy when estimating human exposure to pollutants in various indoor settings.