pH dependence of structure and surface properties of microbial EPS

Capsular Polysaccharides Are Crucial for the Biosorption of Aqueous Pb(II) Ions by Limosilactobacillus fermentum B44 In Vitro

Lead (Pb) is a widespread heavy metal pollutant that presents substantial risks to ecological systems and human health. The utilization of probiotic lactic acid bacteria (LAB) for the detoxification of Pb(II) in the host has aroused great interest. However, few studies had focused on the roles of capsular polysaccharide (CPS) in the bacteria adsorption of Pb(II). In the present study, L. fermentum B44 was selected out of nine lactobacilli for its superior absorption capacity of Pb(II) in vitro. The adsorbed Pb(II) ions by B44 cells were predominantly enriched on the capsule. Removal of the CPS from cells of strain B44 by 1 mol/L guanidine hydrochloride (GuHCl) would decrease the adsorption capacity of the host cells. The CPS showed a high capacity for Pb(II) adsorption, and its adsorption behaviour was more accurately described by the Langmuir isotherm model (R2 = 0.97) than by the Freundlich isotherm model (R2 = 0.907). Adsorption of Pb(II) ions would lead the CPS transforming from stacked, porous flakes to rough, condensed ones, with Pb(II) sediment on the CPS surface. Amide groups in B44 CPS were crucial in the adsorption of Pb(II). Our results provided intuitive evidence of the Pb(II) adsorption site on B44 cells and the protection of CPS to the bacterial cells.

Adhesion behavior of dewatered sewage sludge during indirect thermal drying

We comprehensively investigated the factors influencing sludge adhesion during indirect thermal drying. We analyzed sludge properties and assessed adhesion during thermal drying using peel and shear tests at temperatures ranging from 100 to 180 °C. We conducted a comparative analysis of sludge properties and adhesion, exploring their correlations. Additionally, we examined the relationship between sludge adhesion and changes in extracellular polymeric substances (EPSs) throughout the drying process. The results indicate that factors leading to increased sludge adhesiveness include higher drying temperatures and the initial soluble EPS (S-EPS) concentration (R > 0.88). Only the S-EPS concentration showed an initial increase during thermal drying, followed by a decrease. Sludge with higher initial S-EPS concentrations released more S-EPS during the early stages of thermal drying. Sludge adhesion tended to increase after the S-EPS concentration began to decline. These observations suggest that the adhesive properties of sludge are not directly related to S-EPS but rather to the heat-induced release and transformation of organic content into substances that enhance adhesion. Potential technical solutions to mitigate sludge adhesion include lowering the drying temperature or reducing the S-EPS concentration through anaerobic digestion.

Extraction Strategies for Profiling the Molecular Composition of Particulate Organic Matter on Glacier Surfaces

Pigmented microalgae thrive on supraglacial surfaces, producing "sticky" extracellular polymeric substances that combine into a mineral-organic matrix. Together, they enhance snow and ice melting by lowering the albedo. Understanding the chemical nature of particulate organic matter (POM) in this matrix is crucial in assessing its role in supraglacial carbon dynamics. We evaluated POM complexity in alga-rich snow and ice samples containing 0.3-6.4 wt % organic carbon (OC) via extractions with solvents of varying polarity, pH, and OM selectivity. Extraction yields were evaluated by OC analysis of the extracts, and the composition of extracted OM was analyzed using ultrahigh-resolution mass spectrometry. Individual hot water (HW), hydrochloric acid (HCl), and sodium hydroxide (NaOH) extractions achieved up to 87% efficiency, outperforming sequential, organic solvent-based extractions (<11%). OM extracted by HW, HCl, and NaOH combined had more molecular formulas (2827) than OM extracted with organic solvents (1926 formulas). Combined HW, NaOH, and HCl extractions yielded an OM composition with unsaturated, highly unsaturated, aromatic, and N-containing compounds, while unsaturated aliphatics and black carbon-derived polycyclic aromatics were enriched in the organic solvent extracts. This molecular profiling provides the first comprehensive insights into supraglacial POM composition, opening the window for understanding its role in the cryospheric carbon cycle.

Dynamic responses and adsorption mechanisms of Chlamydomonas reinhardtii extracellular polymeric substances under Cd, Cu, Pb, and Zn exposure

Extracellular polymeric substances (EPS) can effectively attenuate heavy metal mobility in aquatic ecosystems and reduce metal toxicity to cells. However, a systematic study of microalgae EPS responses and their adsorption behaviors, characteristics, and mechanisms under different heavy metal exposures has not been performed. In this study, EPS extracted from Chlamydomonas reinhardtii CC-125 was analyzed for compositional changes (monosaccharides and proteins) under Cd, Cu, Pb, and Zn treatments. The EPS adsorption capacities and mechanisms for the four metal ions were also investigated. Cd (10 mg/L), Cu (5 mg/L), and Zn (5 mg/L) exposure induced changes in the microalgal EPS composition and structure, and a protein/polysaccharide ratio of greater than 1 was found. This result indicated the crucial role of proteins in stress resistance. In contrast, Pb stress resulted in an increase of 532.64% and 117.48% in proteins and polysaccharides, respectively, with galactose and glucose playing key roles in this process. A fluorescence analysis revealed that Cd/Pb exposure reduced the tryptophan and tyrosine levels in the EPS, while Cu/Zn only weakened tryptophan. As a biosorbent, the adsorption capacity of the EPS for the four metals followed the order of Pb > Cd > Cu > Zn. The fluorescence quenching titration results revealed that fluorescent compounds in the EPS had the strongest complexation ability with Pb (logKSV: 8.16 × 103), followed by Cu (logKSV: 1.79 × 103), while their abilities for Cd and Zn were weaker. A spectroscopic analysis indicated that the primary functional groups involved in EPS binding with Pb/Cd and Cd/Zn were protein carboxyl groups (C=O/O-C=O) and glycosidic bonds (C-OH/C-O-C), respectively. This study elucidates the response strategies and adsorption mechanisms of the C. reinhardtii EPS to different metals and provides a basis for environmental heavy metal pollution bioremediation.

Long-term and multiscale assessment of methanogenesis enhancement mechanisms in magnetite nanoparticle-mediated anaerobic digestion reactor

Magnetite nanoparticles (Fe3O4-NPs) have been demonstrated to be involved in direct interspecies electron transfer between syntrophic bacteria, yet a comprehensive assessment of the ability of Fe3O4-NPs to cope with process instability and volatile fatty acids (VFAs) accumulation in scaled-up anaerobic reactors is still lacking. Here, we investigated the start-up characteristics of an expanded granular sludge bed (EGSB) with Fe3O4-NPs as an adjuvant at high organic loading rate (OLR). The results showed that the methane production rate of R1 (with Fe3O4-NPs) was approximately 1.65 folds of R0 (control), and effluent COD removal efficiency was maintained at approximately 98.32% upon 20 kg COD/(m3·d) OLR. The components of volatile fatty acids are acetate and propionate, and the rapid scavenging of propionate accumulation was the difference between R1 and the control. The INT-ETS activity of R1 was consistently higher than that of R0 and R2, and the electron transfer efficiencies increased by 68.78% and 131.44%, respectively. Meanwhile, the CV curve analysis showed that the current of R1 was 40% higher than R3 (temporary addition of Fe3O4-NPs), indicating that multiple electron transfer modes might coexist. High-throughput analysis further revealed that it was difficult to reverse the progressive deterioration of system performance with increasing OLR by simply reconfiguring bacterial community structure and abundance, demonstrating that the Fe3O4-NPs-mediated DIET pathway is a prerequisite for establishing multiple electron transfer systems. This study provides a long-term and multi-scale assessment of the gaining effect of Fe3O4-NPs in anaerobic digestion scale-up devices, and provides technical support for their practical engineering applications.

Biopolymeric Ionotronics Based on Biodegradable Wool Keratin

The advent of ionotronics has revealed significant potential in flexible transistors, energy harvesting, and unconventional circuits. However, most ionotronic devices, often centered around synthetic polymers, involve complex grafting or synthesis that raise legitimate concerns about their environmental sustainability. Herein, a simple yet versatile approach for developing single-composition ionotronic devices using wool keratin (WK), a biodegradable and pH-responsive natural polymer is presented. By employing facile pH regulation processes, WK molecules with opposing polarities are successfully modified, which are combined to form an ionic heterojunction through entropically driven depletion. This ionic heterojunction functions as an ionic diode, enabling efficient rectification of alternating current signals (with a rectification ratio of up to 199). Furthermore, the application of this biopolymeric ionotronic device is extended to mechanical energy harvesting, self-powered sensing, and ionic logic circuit. The biodegradability and renewability of WK offer a viable alternative to synthetic materials, highlighting its potential for sustainable applications.

Unveiling the common laws of extracellular polymeric substances (EPS) properties on short-chain fatty acids production from sludge by EPS disintegration pretreatment

The production of short-chain fatty acids (SCFAs) from sludge is promising, but the efficiency and product quality often vary because of extracellular polymeric substances (EPS) characteristics and pretreatment principles. This study adopted specific EPS disintegration pretreatment to treat different types of sludge. By correlation coefficient matrix analysis and correlation dynamics change resolution, the intrinsic relationships between the nature of EPS and the production of SCFAs from sludge was unveiled. We demonstrate that tight-bound EPS (TB-EPS) is a principal carbon reservoir, positively impacting SCFAs yields, in the fermentation system with EPS as the main fermentation substrate, it can contribute about 29.2 % for SCFAs growth during fermentation. Conversely, TB-EPS exhibits a negative correlation during fermentation due to EPS-SCFAs interconversion, while loosely bound EPS (LB-EPS) correlates positively. Proteins and polysaccharides in TB-EPS, especially proteins, significantly enhance individual SCFAs yields, predominantly acetic, propionic, and isovaleric acids. The findings would provide a theoretical basis for developing pretreatments and process-control technologies aimed at improving SCFAs production efficiency and quality.

Comparison of oven drying and freeze drying methods for the production of fast melt films containing quetiapine fumarate

BACKGROUND

Quetiapine fumarate (QTP) is commonly prescribed for schizophrenic patient, typically available in tablet or oral suspension form, presenting challenges such as administration difficulties, fear of choking and distaste for its bitter taste. Fast melt films (FMF) offer an alternative dosage form with a simple development process, ease of administration and rapid drug absorption and action onset.

OBJECTIVE

This study aims to prepare FMF with different formulations using solvent casting methods and to compare the effects of different drying methods, including oven drying and freeze drying, on the properties of the films.

METHODS

Various formulations were created by manipulating polymer types (starch, hydroxypropyl methylcellulose (HPMC) and guar gum) at different concentrations, along with fixed concentrations of QTP and other excipients. Characterization tests including surface morphology, weight, thickness, pH, tensile strength, elongation length, Young's modulus, folding endurance and disintegration time were conducted. The optimal FMF formulation was identified and further evaluated for moisture and drug content, dissolution behavior, accelerated stability, X-ray diffraction (XRD), and palatability.

RESULTS

FMF containing 10 mg guar gum/film developed using oven drying emerged as the optimum choice, exhibiting desirable film appearance, ultra-thin thickness (0.453 ± 0.002 mm), appropriate pH for oral intake (pH 5.0), optimal moisture content of 11.810%, rapid disintegration (52.67 ± 1.53 s), high flexibility (folding endurance > 300 times) and lower Young's modulus (1.308 ± 0.214).

CONCLUSION

Oven drying method has been proven to be favorable for developing FMF containing QTP, meeting all testing criteria and providing an alternative option for QTP prescription.

Antibiofilm and wound healing efficacy of rhamnolipid biosurfactant against pathogenic bacterium Staphylococcus aureus

The present study evaluates the in-vitro antibiofilm activity against the biofilm formed by Staphylococcus aureus, and the wound-healing efficacy of two different types of rhamnolipids produced by Pseudomonas aeruginosa strain JS29 in S.aureus infected wounds. The biosurfactant production was carried out in a mineral salt medium supplemented with 2 % Glucose and 2 % Glycerol individually and thus were designated as RL-Glu and RL-Gly respectively. 0.5 mg/ml of RL-Glu and RL-Gly demonstrated 90 % growth inhibition of S. aureus while exhibiting bactericidal activity at 4 mg/ml of RL-Glu and 1 mg/ml of RL-Gly. Both types of rhamnolipid cause changes in membrane permeability leading to pathogens' non-viability. 90 % inhibition of biofilm formation by S. aureus was observed at 2 mg/ml of RL-Glu and 0.5 mg/ml of RL-Gly, while 0.5 mg/ml of both rhamnolipid disrupted 90 % of the preformed biofilm. 0.5 mg/ml of RL-Glu and RL-Gly decreases the production of exopolysaccharides and also causes structural alteration. 0.5 mg/ml of RL-Glu and RL-Gly were found to exhibit effective wound healing efficacy in S. aureus infected wounds within 7 days of treatment. Histopathological studies of wound sites revealed efficient wound management by both the rhamnolipid. LCMS and GCMS characterization of the biosurfactant revealed that JS29 produces different rhamnolipid congeners when grown on different carbon sources, thereby influencing the antimicrobial, antibiofilm, and wound healing efficacy of rhamnolipid.

New insight into enhanced carbon recovery from anaerobic fermentation of waste activated sludge with cation exchange resin coupled with NaCl pretreatment

Carbon recovery from waste activated sludge has been attracting considerable attention. However, the migration and transformation patterns of carbon sources between the phases have rarely been reported. In this study, a novel strategy using cation exchange resin (CER) coupled with sodium chloride (NaCl) to enhance carbon recovery through anaerobic fermentation (AF) was proposed. The results demonstrated that CER coupled with NaCl destroyed OH and CO stretching in amide I while promoting the formation of β-sheet and random coil structures, leading to sludge disintegration. This significantly improved the kinetics of endogenous carbon release, resulting in the release of 1146.33 mg/L of carbon from the solid sludge into the liquid phase. Approximately 75.61 % of the initial carbon source was bio-transformed into short-chain fatty acids. Correspondingly, carbon recovery was significantly increased up to 852.23 mg C/L, 4.57 times that of the control. Mechanism exploration revealed that carbon source recovery was significantly elevated by the synergistic effect of CER and NaCl. CER effectively removed high-valence cations from extracellular polymeric substance (EPS), weakening its bridging and adsorption-electro neutralization capabilities, promoting protein deflocculation, and triggering EPS disruption to release extracellular carbon sources. NaCl disrupted the ionic strength and distribution inside and outside microbial cells, creating an osmotic pressure difference that resulted in cell plasmolysis and lysis, ultimately inducing the release of intracellular carbon sources. Economic and carbon emission reduction benefit analyses verified that the CER coupled with NaCl pretreatment is a cost-effective sludge treatment strategy. This study illustrates the carbon source migration and transformation pathways in the CER coupled with NaCl-assisted AF process, providing guidance for sustainable sludge management.

Molecular spectra and docking simulations investigated the binding mechanisms of tetracycline onto E. coli extracellular polymeric substances

Extracellular polymeric substances (EPS), which were an important fraction of natural organic matter (NOM), played an important role in various environmental processes. However, the heterogeneity, complexity, and dynamics of EPS make their interactions with antibiotics elusive. Using advanced multispectral technology, this study examined how EPS interacts with different concentrations of tetracycline (TC) in the soil system. Our results demonstrated that protein-like (C1), fulvic-like (C2), and humic-like (C3) fractions were identified from EPS. Two-dimensional synchronous correlation spectroscopy (2D-SF-COS) indicated that the protein-like fraction gave faster responses than the fulvic-like fraction during the TC binding process. The sequence of structural changes in EPS due to TC binding was revealed by two-dimensional Fourier Transformation Infrared correlation spectroscopy (2D-FTIR-COS) as follows: 1550 > 1660 > 1395 > 1240 > 1087 cm-1. It is noteworthy that the sensitivity of the amide group to TC has been preserved, with its intensity gradually increasing to become the primary binding site for TC. The integration of hetero-2DCOS maps with moving window 2D correlation spectroscopy (MW2DCOS) provided a unique insight into understanding the correlation between EPS fractions and functional groups during the TC binding process. Moreover, molecular docking (MD) discovered that the extracellular proteins would provide plenty of binding sites with TC through salt bridges, hydrogen bonds, and π-π base-stacking forces. With these results, systematic investigations of the dynamic changes in EPS components under different concentrations of antibiotic exposure demonstrated the advanced capabilities of multispectral technology in examining intricate interactions with EPS in the soil environment.

Strategy to prevent calcification by restricting surface adhesion of Ca2+: Reduced affinity of extracellular polymeric substances for Ca2+ by mild acidic conditions

Controlling CaCO3 precipitation within anaerobic granular sludge (AnGS) is crucial for the anaerobic treatment of paper recycling wastewater. A viable strategy was proposed to control calcification by adjusting a mild acidic condition in an anaerobic reactor without hindering organic degradation. The results indicated that lowering the bulk pH (6.5 to 6.8) reduced calcium precipitation by 60.1 % in calcium-rich influent (Ca2+ 1200 mg/L) and eradicated CaCO3 deposition on AnGS. Extracellular polymeric substances (EPS) have proven to be crucial participants in Ca2+ migration. The acidic solution weakens the interactions between EPS and Ca2+ and then diminishes the EPS adsorption capacity and affinity for Ca2+. The mild acidic environment goes beyond reducing CaCO3 formation in wastewater. EPS protonation reduced the probability of Ca2+ adhering to the AnGS surface, which halted calcium transportation from bulk liquid to granule. This work offers a feasible strategy to prevent AnGS calcification in high-calcium wastewater.

Cr(VI) removal during cotransport of nano-iron-particles combined with iron sulfides in groundwater: Effects of D. vulgaris and S. putrefaciens

Iron-based materials such as nanoscale zerovalent iron (nZVI) are effective candidates to in situ remediate hexachromium (Cr(VI))-contaminated groundwater. The anaerobic bacteria could influence the remediation efficiency of Cr(VI) during its cotransport with nZVI in porous media. To address this issue, the present study investigated the adsorption and reduction of Cr(VI) during its cotransport with green tea (GT) modified nZVI (nZVI@GT) and iron sulfides (FeS and FeS2) in the presence of D. vulgaris or S. putrefaciens in water-saturated sand columns. Experimental results showed that the nZVI@GT preferred to heteroaggregate with FeS2 rather than FeS, forming nZVI@GT-FeS2 heteroaggregates. Although the presence of D. vulgaris further induced nZVI@GT-FeS2 heteroaggregates to form larger clusters, it pronouncedly improved the dissolution of FeS and FeS2 for more Cr(VI) reduction associated with lower Cr(VI) flux through sand. In contrast, S. putrefaciens could promote the dispersion of the heteroaggregates of nZVI@GT-FeS2 and the homoaggregates of nZVI@GT or FeS by adsorption on the extracellular polymeric substances, leading to the improved transport of Fe-based materials for a much higher Cr(VI) immobilization in sand media. Overall, our study provides the essential perspectives into a chem-biological remediation technique through the synergistic removal of Cr(VI) by nZVI@GT and FeS in contaminated groundwater. ENVIRONMENTAL IMPLICATION: The green-synthesized nano-zero-valent iron particles (nZVI@GT) using plant extracts (or iron sulfides) have been used for in situ remediation of Cr(VI) contaminated groundwater. Nevertheless, the removal of Cr(VI) (including Cr(VI) adsorption and Cr(III) generation) could be influenced by the anaerobic bacteria governing the transport of engineered nanoparticles in groundwater. This study aims to reveal the inherent mechanisms of D. vulgaris and S. putrefaciens governing the cotransport of nZVI@GT combined with FeS (or FeS2) to further influence the Cr(VI) removal in simulated complex groundwater media. Our findings provides a chemical and biological synergistic remediation strategy for nZVI@GT application in Cr(VI)-contaminated groundwater.

Effects of pH-varying thermal modification on sewage sludge: A focus on releasing nitrogen- and phosphorus-containing substances

Sewage sludge is promising for the recovery and utilisation of nutrient components, but its complex nature hinders the release of these components. The combination of pH and thermal modifications shows promise for the release of nutrient components from sludge. However, comprehensive studies on the full spectrum of pH levels and corresponding mechanisms of pH-varying thermal modification are lacking. In this study, the main nutrient components, physicochemical properties, molecular structure, and noncovalent interactions of sludge were comprehensively investigated through pH-varying thermal modification (within a pH range of 2.0 to 12.0 under the same thermal condition). The experimental results showed that the release of main organics, particularly nitrogen (N)-containing organics, was well-fitted, with a tick-like function (R2: 0.74-0.96). The thermal protons exhibited a notable accumulative mutagenic effect on the N-containing organics release, while the thermal hydroxyl ions had a more direct effect, as revealed by the changes in multivalent metals and molecular structures with the protonation-deprotonation of carboxyl groups. The driving force for the release of N-containing organics was identified as the fluctuation of electrostatic interactions at the solid-liquid interface of the sludge. However, the release of phosphorus (P)-containing substances exhibited a contrasting response to that of N-containing substances with varying pH, likely because the reaction sites of thermal protons and thermal hydroxyl ions for P-containing substances were different. Moreover, high concentrations of thermal protons and hydroxyl ions collapsed the Lifshitz-van der Waals interactions of sludge, resulting in a decrease in viscoelasticity and binding strength. These propositions were further confirmed through statistical analyses of the main indicators of the main nutrient components, physicochemical properties, and noncovalent interactions of sludge. These findings can provide a basis for optimising characteristic-specific methods to recovery nutrient components (N/P) from sludge.

Simultaneous removal of NOM and sulfate in a bioelectrochemical integrated biofilter treating reclaimed water

Biofiltration is an environmentally 'green' technology that is compatible with the recently proposed sustainable development goals, and which has an increasingly important future in the field of water treatment. Here, we explored the impacts of bioelectrochemical integration on a bench-scale slow rate biofiltration system regarding its performance in reclaimed water treatment. Results showed that the short-term (<3 months) integration improved the removal of natural organic matter (NOM) (approximately 8.8%). After long-term (5 months and thereafter) integration, the cathodic charge transfer resistance was found to have a significant reduction from 2662 to 1350 Ω. Meanwhile, bioelectrochemical autotrophic sulfate (SO42-) reduction (over 27.6% reduction) through the syntrophic metabolism between hydrogen oxidation strains (genus Hydrogenophaga) and sulfate-reducing microbes (genera Dethiobacter, Desulfovibrio, and Desulfomicrobium) at the cathodic region was observed. More significantly, the microbial-derived chromophoric humic substances were found to act as electron shuttles at the cathodic region, which might facilitate the process of bioelectrochemical SO42- reduction. Overall, this study provided valuable insights into the potential application of bioelectrochemical-integrated biofilter for simultaneous reduction of NOM and SO42- treating reclaimed water.

Molecular dynamics simulation of the 3-15alkyphenol compatibilizer in highly toughened and robust polyamide 10,12/MWCNT composites

Highly toughened and stiff polyamide 10,12 (PA10,12) composites present a promising alternative to metal products for high-impact environments. However, it is challenging to toughen PA10,12 composites without compromising their robustness. Herein, we report a facile and scalable route to simultaneously develop reinforced and toughened PA10,12 composites via compounding PA10,12, carbon nanotubes (CNTs) and 3-15alkyphenol (PDP). The PDP acted as a compatibilizer to well-disperse MWCNTs since they tended to be adsorbed onto the CNT surface, which was revealed by molecular dynamics simulation. According to the simulation statistics, the vertical PDP conformations (to the CNT surface) were predominant in the ternary composites with ∼78.7% probability. Moreover, the hydrogen bonds (H-bonds) between the PDP and the PA matrix were confirmed using FTIR. A crystallization kinetics study also revealed that the crystallization temperature increased from 166.7 °C for the neat PA10,12 to 168.7 °C for the ternary PA/PDP/CNT composites containing 1.5 wt% CNTs, while the crystallization half-time increased from 0.58 s for the neat PA10,12 to 1.2 s for the ternary composites. It was also found that the notched impact strength of the ternary composites reached 75.2 kJ m-2, which was 970% higher than that of the neat PA10,12 without compromising their tensile strength of 50.5 MPa much. This work provides a new insight into PDP as a compatibilizer to develop simultaneously stiff and toughened nylon composites.

Formation of extracellular polymeric substances corona on TiO2 nanoparticles: Roles of crystalline phase and exposed facets

Nanoparticles (NPs) in the environment can interact with macromolecules in the surrounding environment to form eco-corona on their surfaces, which in turn affects the environmental fate and toxicity of nanoparticles. Wastewater treatment plants containing large amounts of microbial extracellular polymeric substances (EPS) are an important source of NPs into the environment, where the formation of EPS coronas on NPs is critical. However, it remains unclear how the crystalline phase and exposed facets, which are intrinsic properties of NPs, affect the formation of EPS coronas on NPs. This study investigated the formation of EPS corona on three TiO2 NPs (representing the most widely used engineered NPs) with different crystalline phases and exposed facets. The protein type and abundance in EPS coronas on TiO2 NPs varied depending on the crystalline phase and exposed facets. Anatase with {101} facets and {001} facets preferred to adsorb proteins with lower molecular weights and higher H-bonding relevant amino acids, respectively, while EPS corona on rutile with {110} facets had proteins with higher hydrophobicity. In addition, the selective adsorption of proteins was primarily determined by steric hindrance, hydrogen bonding, and hydrophobic interaction between TiO2 NPs and proteins, which were affected by changes in aggregation state, surface hydroxyl density, and hydrophobicity of TiO2 NPs induced by crystalline phase and exposed facets. Moreover, crystalline phase and exposed facets-induced EPS corona changes altered the aggregation state and oxidation potential of TiO2-EPS corona complexes. These findings emphasize the important role of crystalline phase and exposed facets in the environmental behavior of nanoparticles and may provide insights into the safe design of nanoparticles.

Genome-resolved metaproteogenomic and nanosolid characterization of an inactive vent chimney densely colonized by enigmatic DPANN archaea

Recent successes in the cultivation of DPANN archaea with their hosts have demonstrated an episymbiotic lifestyle, whereas the lifestyle of DPANN archaea in natural habitats is largely unknown. A free-living lifestyle is speculated in oxygen-deprived fluids circulated through rock media, where apparent hosts of DPANN archaea are lacking. Alternatively, DPANN archaea may be detached from their hosts and/or rock surfaces. To understand the ecology of rock-hosted DPANN archaea, rocks rather than fluids should be directly characterized. Here, we investigated a deep-sea hydrothermal vent chimney without fluid venting where our previous study revealed the high proportion of Pacearchaeota, one of the widespread and enigmatic lineages of DPANN archaea. Using spectroscopic methods with submicron soft X-ray and infrared beams, the microbial habitat was specified to be silica-filled pores in the inner chimney wall comprising chalcopyrite. Metagenomic analysis of the inner wall revealed the lack of biosynthetic genes for nucleotides, amino acids, cofactors, and lipids in the Pacearchaeota genomes. Genome-resolved metaproteomic analysis clarified the co-occurrence of a novel thermophilic lineage actively fixing carbon and nitrogen and thermophilic archaea in the inner chimney wall. We infer that the shift in metabolically active microbial populations from the thermophiles to the mesophilic DPANN archaea occurs after the termination of fluid venting. The infilling of mineral pores by hydrothermal silica deposition might be a preferred environmental factor for the colonization of free-living Pacearchaeota with ultrasmall cells depending on metabolites synthesized by the co-occurring thermophiles during fluid venting.

Roles of extracellular polymeric substances in the adsorption and removal of norfloxacin during hydrothermal treatment of sewage sludge

Hydrothermal treatment (HT) is promising to remove antimicrobials from sewage sludge (SS); however, the mechanism of antimicrobial degradation during the HT of SS is not fully understood. In this study, the roles of extracellular polymeric substances (EPS) in the removal and transformation of norfloxacin (NOR) during the HT of SS at temperatures of 100 and 160 °C were investigated. The results indicated that the degradation of NOR increased with increasing HT temperature, with maximum NOR removal (52%) achieved at 160 °C. Furthermore, the NOR in sludge showed higher degradation efficiencies than the control as HT temperature was higher than 120 °C. Evident promotion effects of bound-EPS (B-EPS) in sludge were observed on the NOR degradation as HT temperature was higher than 120 °C, leading to the mineralization and deamination of protein-like components in EPS during HT. Beside, the adsorption capacity of NOR during the HT of SS decreased at temperatures higher than 120 °C. The evolution of the spatial structure of B-EPS was predominantly responsible for the adsorption of antimicrobials, a spontaneous process driven mainly by hydrophilic interactions. With the hydrothermal conversion of B-EPS, the electron transfer, and reactive species (3EPS* and ·OH) derived from B-EPS could facilitate the degradation of NOR. In particular, hydrogen bonds between B-EPS and NOR increased the apparent yield of ·OH and accelerated the decarboxylation of NOR during HT at temperatures higher than 120 °C. A toxicity evaluation suggested that HT for NOR degradation could attenuate toxicity, whereas deep oxidation or mineralization would be needed to promote ecosystem safety. These findings provide new insights into the hydrothermal activation of EPS and the interrelated hydrothermal fate of antimicrobials and other toxic pollutants in sludge.

Exploring the cellular surface polysaccharide and root nodule symbiosis characteristics of the rpoN mutants of Bradyrhizobium sp. DOA9 using synchrotron-based Fourier transform infrared microspectroscopy in conjunction with X-ray absorption spectroscopy

The functional significance of rpoN genes that encode two sigma factors in the Bradyrhizobium sp. strain DOA9 has been reported to affect colony formation, root nodulation characteristics, and symbiotic interactions with Aeschynomene americana. rpoN mutant strains are defective in cellular surface polysaccharide (CSP) production compared with the wild-type (WT) strain, and they accordingly exhibit smaller colonies and diminished symbiotic effectiveness. To gain deeper insights into the changes in CSP composition and the nodules of rpoN mutants, we employed synchrotron-based Fourier transform infrared (SR-FTIR) microspectroscopy and X-ray absorption spectroscopy. FTIR analysis of the CSP revealed the absence of specific components in the rpoN mutants, including lipids, carboxylic groups, polysaccharide-pyranose rings, and β-galactopyranosyl residues. Nodules formed by DOA9WT exhibited a uniform distribution of lipids, proteins, and carbohydrates; mutant strains, particularly DOA9∆rpoNp:ΩrpoNc, exhibited decreased distribution uniformity and a lower concentration of C=O groups. Furthermore, Fe K-edge X-ray absorption near-edge structure and extended X-ray absorption fine structure analyses revealed deficiencies in the nitrogenase enzyme in the nodules of DOA9∆rpoNc and DOA9∆rpoNp:ΩrpoNc mutants; nodules from DOA9WT and DOA9∆rpoNp exhibited both leghemoglobin and the nitrogenase enzyme. IMPORTANCE This work provides valuable insights into how two rpoN genes affect the composition of cellular surface polysaccharides (CSPs) in Bradyrhizobium sp., which subsequently dictates root nodule chemical characteristics and nitrogenase production. We used advanced synchrotron methods, including synchrotron-based Fourier transform infrared (SR-FTIR) microspectroscopy and X-ray absorption spectroscopy (XAS), for the first time in this field to analyze CSP components and reveal the biochemical changes occurring within nodules. These cutting-edge techniques confer significant advantages by providing detailed molecular information, enabling the identification of specific functional groups, chemical bonds, and biomolecule changes. This research not only contributes to our understanding of plant-microbe interactions but also establishes a foundation for future investigations and potential applications in this field. The combined use of the synchrotron-based FTIR and XAS techniques represents a significant advancement in facilitating a comprehensive exploration of bacterial CSPs and their implications in plant-microbe interactions.

Extraction and application of extracellular polymeric substances from fungi

Extracellular polymeric substances (EPS) are extracellular metabolites of microorganisms, highly associated with microbial function, adaptation, and growth. The main compounds in EPS have been revealed to be proteins, polysaccharides, nucleic acids, humic substances, lipids, etc. EPS are not only biomass, but also a biogenic material. EPS have high specific surface, abundant functional groups, and excellent degradability. In addition, they are more extensible to the environment than the microbial cells themselves, which exhibits their huge advantages. Therefore, they have been applied in many fields, such as the environment, ecosystem, basic commodities, and medicine. However, the functions of EPS highly depend on the suitable extraction process, as different extraction methods have different effects on their composition, structure, and function. There are many types of EPS extraction methods, in which physical and chemical methods have been widely utilized. This review summarizes the extraction methods and applications of EPS. In addition, it considers some important gaps in current knowledge, and indicates perspectives of EPS for their future study.

'Follow the Water': Microbial Water Acquisition in Desert Soils

Water availability is the dominant driver of microbial community structure and function in desert soils. However, these habitats typically only receive very infrequent large-scale water inputs (e.g., from precipitation and/or run-off). In light of recent studies, the paradigm that desert soil microorganisms are largely dormant under xeric conditions is questionable. Gene expression profiling of microbial communities in desert soils suggests that many microbial taxa retain some metabolic functionality, even under severely xeric conditions. It, therefore, follows that other, less obvious sources of water may sustain the microbial cellular and community functionality in desert soil niches. Such sources include a range of precipitation and condensation processes, including rainfall, snow, dew, fog, and nocturnal distillation, all of which may vary quantitatively depending on the location and geomorphological characteristics of the desert ecosystem. Other more obscure sources of bioavailable water may include groundwater-derived water vapour, hydrated minerals, and metabolic hydro-genesis. Here, we explore the possible sources of bioavailable water in the context of microbial survival and function in xeric desert soils. With global climate change projected to have profound effects on both hot and cold deserts, we also explore the potential impacts of climate-induced changes in water availability on soil microbiomes in these extreme environments.

Sub-inhibitory concentrations of ampicillin affect microbial Fe(III) oxide reduction

Antibiotics are ubiquitous in the iron-rich environments but their roles in microbial reduction of Fe(III) oxides are still unclear. Using ampicillin and Geobacter soli, this study investigated the underlying mechanism by which antibiotic regulated microbial reduction of Fe(III) oxides. Results showed that sub-minimal inhibitory concentrations (sub-MIC) of ampicillin significantly affected ferrihydrite reduction by G. soli, with a stimulatory effect at 1/64 and 1/32 MIC and an inhibitory effect at 1/8 MIC. Increasing ampicillin concentration resulted in increasing cell length and decreasing bacterial zeta potential that were beneficial for ferrihydrite reduction, and decreasing outer membrane permeability that was unfavorable for ferrihydrite reduction. The respiratory metabolism ability was enhanced by 1/64 and 1/32 MIC ampicillin and reduced by 1/8 MIC ampicillin, which was also responsible for regulation of ferrihydrite reduction by ampicillin. The ferrihydrite reduction showed a positive correlation with the redox activity of extracellular polymeric substances (EPS) which was tied to the cytochrome/polysaccharide ratio and the content of α-helices and β-sheet in EPS. These results suggested that ampicillin regulated microbial Fe(III) oxide reduction through modulating the bacterial morphology, metabolism activity and extracellular electron transfer ability. Our findings provide new insights into the environmental factors regulating biogeochemical cycling of iron.

Multispecies biofilms on reverse osmosis membrane dictate the function and characteristics of the bacterial communities rather than their structure

The main reason for the deterioration of membrane operation during water purification processes is biofouling, which has therefore been extensively studied. Biofouling was shown to reduce membrane performance reflected by permeate flux decline, reduced selectivity, membrane biodegradation, and consequently, an increase in energy consumption. Studies of biofouling focused on the identification of the assembled microbial communities, the excretion of extracellular polymeric substances (EPS), and their combined role in reduced membrane performance and lifetime. However, the link between the structure and function of biofouling communities has not been elucidated to date. Here, we provide a novel insight, suggesting that bacterial functions rather than composition control biofouling traits on reverse osmosis (RO) membranes. We studied the potential activity of RO biofilms at metatranscriptome resolution, accompanied by the morphology and function of the biofouling layer over time, including microscopy and EPS composition, adhesion, and viscoelastic properties. To that end, we cultivated natural multispecies biofilms in RO membranes under treated wastewater flow and extracted RNA to study their taxonomies and gene expression profiles. Concomitantly, the biofilm structure was visualized using both scanning electron microscopy and laser scanning confocal microscopy. We also used quartz crystal microbalance with dissipation to characterize the affinity of EPS to membrane-mimetic sensors and evaluated the viscoelasticity of the Ex-Situ EPS layer formed on the sensor. Our results showed that different active bacterial taxa across five taxonomic classes were assembled on the RO membrane, while the composition shifted between 48 and 96 h. However, regardless of the composition, the maturation of the biofilm resulted in the expression of similar gene families tightly associated with the temporal kinetics of the EPS composition, adhesion, and viscoelasticity. Our findings highlight the temporal selection of specific microbial functions rather than composition, featuring the adhesion kinetics and viscoelastic properties of the RO biofilm.

The effect of repeated energy inputs on the release profiles of extracellular organic substances in sewage sludge

Organic matter (OM) recovery from sewage sludge is critical for sustainable development. Extracellular organic substances (EOS) are the main organic components of sludge, and the release of EOS from sludge is usually the rate-limiting step for OM recovery. However, a poor understanding of the intrinsic characteristics of binding strength (BS) of EOS usually restricts the release of OM from sludge. To reveal the underlying mechanism that how the intrinsic characteristics of EOS limit its release, in this study, the BS of EOS in sludge was quantitatively characterised by 10 rounds of energy input (E_in) with the same magnitude per round; the corresponding changes in the main components, floc structures and rheological properties of sludge after different numbers of E_in were also explored. Results showed that relationships between the release of EOS and the main multivalent metals, median diameters, fractal dimensions, elastic modulus and viscous modulus in the linear viscoelastic region of sludge versus the number of E_in, highlighted that the power-law distribution of BS in EOS was responsible for the occurrence state of organic molecules, stability of floc structures and maintenance of rheological properties. The result of hierarchical cluster analysis (HCA) further revealed three BS levels of the EOS in sludge, indicating that the release or recovery of OM from sludge occurred in three stages. To the best of our knowledge, this is the first study that explores the release profiles of EOS in sludge by repeated E_in for assessing the BS. Our findings may provide an important theoretical basis for the development target methods about the release and recovery of OM from sludge.

Aggregation and construction mechanisms of microbial extracellular polymeric substances with the presence of different multivalent cations: Molecular dynamic simulation and experimental verification

Interactions between cations and extracellular polymeric substances (EPS) play an important role in the formation of microbial aggregates and have key effects on the physical properties of activated sludge across wastewater and sludge treatment process. Here, a molecular model of EPS cluster in activated sludge was constructed and simulated by molecular dynamics (MD) to probe the structural properties of EPS and the interaction between EPS and prevalent multivalent cations (Ca²⁺, Mg²⁺, Al³⁺). Then the predicted changes in physical properties were validated against the dynamic light scattering, XAD resin fractionation and rheology test. The binding dynamics and interactions mechanisms between multivalent cations and EPS functional groups were further investigated using MD in combination with spectroscopic analysis. Results suggest that biopolymers are originally aggregated by electrostatic and intermolecular interactions forming dynamic clusters with negatively charged surface functional groups, which induced electrostatic repulsion preventing further agglomeration of biopolymer clusters. In the presence of multivalent cations, surface polar functional groups in biopolymers are connected, causing the rearrangement of EPS molecular conformation that forms larger and denser agglomerates. Reduced solvent accessible surface area, enhanced hydrophobicity, and increased binding free energy lead to a strong gel-like network of EPS. Ca²⁺ and Al³⁺ predominantly interact with functional groups in polysaccharides, promoting agglomeration of macromolecules. In contrast, Mg²⁺ and Al³⁺ disrupted the secondary structure of proteins, exposing hydrophobic interaction sites. Al³⁺ can better agglomerate biopolymers with its higher positive charge and shorter coordination distance as compared to Ca²⁺ and Mg²⁺, but compromised by the effect of hydration. This work offers a novel approach to explore the construction and molecular aggregation of EPS, enriching the theoretical basis for optimization of wastewater and sludge treatment.

Synergistic effect of extracellular polymeric substances and carbon layer on electron utilization of Fe@C during anaerobic treatment of refractory wastewater

Nano zero-valent iron (NZVI) has been widely used to improve refractory wastewater treatment. However, the rapid dissolution of NZVI causes a waste of resources and an unstable bioaugmentation. Herein, to verify the essential role of slow release of NZVI on biological systems, a core-shell structured Fe@C composite was developed to demonstrate the long-term feasibility of Fe@C for enhancing azo dye biodegradation in comparison to a mixture of NZVI and carbon powder (Fe+C). The 150 days of long-term reactor operation showed that, although both Fe@C and Fe+C enhanced azo dye degradation, the former achieved a better performance than the latter. The strengthening effect of Fe@C was also more durable and stable than Fe+C. It may be due to the fact that the carbon layer of Fe@C could interact with extracellular polymeric substances (EPS) through physical adsorption and chemical bonding to form a stable buffer to regulate NZVI dissolution. The buffer layer could not only regulate the attack of H⁺ on NZVI to reduce its dissolution rate but also complex released Fe²⁺ and neutralize OH^- to alleviate the passivation layer formed on the NZVI surface. Moreover, microbial community analysis indicated that both Fe@C and Fe+C increased the abundance of fermentative bacteria (e.g., Bacteroidetes_vadinHA17, Propionicicella) and methanogens (e.g., Methanobacterium), but only Fe@C promoted the growth of azo dye degraders (e.g., Clostridium, Geobacter). Metatranscriptomic analysis further revealed that only Fe@C could substantially stimulate the expression of azoreductase and redox mediator (e.g., riboflavin, ubiquinone) biosynthesis involved in the extracellular degradation of azo dye. This work provides novel insights into the bioaugmentation of Fe@C for refractory wastewater treatment.

Microalgal extract as bio-coating to enhance biofilm growth of marine microalgae on microporous membranes

Microalgal biofilm is a popular platform for algal production, nutrient removal and carbon capture; however, it suffers from significant biofilm exfoliation under shear force exposure. Hence, a biologically-safe coating made up of algal extracellular polymeric substances (EPS) was utilized to secure the biofilm cell retention and cell loading on commercial microporous membrane (polyvinylidene fluoride), making the surfaces more hydrophobic (contact angle increase up to 12°). Results demonstrated that initial cell adhesion of three marine microalgae (Amphora coffeaeformis, Cylindrotheca fusiformis and Navicula incerta) was enhanced by at least 1.3 times higher than that of pristine control within only seven days with minimized biofilm exfoliation issue due to uniform distribution of sticky transparent exopolymer particles. Bounded extracellular polysaccharide gathered was approximately 23% higher on EPS-coated membranes to improve the biofilm's hydraulic resistance, whereas bounded extracellular protein would only be substantially elevated after the attached cells re-accommodate themselves onto the EPS pre-coating of themselves. In accounting the rises of hydrophobic protein content, biofilm was believed to be more stabilized, presumably via hydrophobic interactions. EPS biocoating would generate a groundswell of interest for bioprocess intensifications though there are lots of inherent technical and molecular challenges to be further investigated in future.

Influence of pH on bioclogging in porous media during managed aquifer recharge (MAR): Effectiveness and mechanism

To investigate the effect of pH on bioclogging process during managed aquifer recharge, three laboratory-scale column experiments were conducted and the relative hydraulic conductivity, bacterial cell number and the concentrations of polysaccharide, protein and EPS were measured under pH 5, 7, and 9, respectively. High-throughput sequencing was also used to determine the characteristics of bacterial community under different pH conditions. The development of bioclogging was rather different for the case of pH 5. 7, and 9; i.e., the growth process and number of bacteria differed with pH. The shortest growth period and lowest number of bacteria were observed at pH 5. In addition, the difference in bacterial EPS concentration was mainly associated with the polysaccharides. The variation in pH led to different bacterial community composition and diversity. The acid-resistant Elizabethkingia and Bacillus were abundant at pH 5, while Chryseobacterium and Klebsiella had relatively high abundances at pH 7. In contrast, the basophilic Exiguobacterium accounted for >80% of the total bacterial abundance at pH 9. This work is of great significance to explore bioclogging mechanism during MAR process, and provides insights and guidances for field-based managed aquifer recharge.

The Bio-Patina on a Hypogeum Wall of the Matera-Sassi Rupestrian Church "San Pietro Barisano" before and after Treatment with Glycoalkaloids

The investigation focused on the deterioration of the walls in the hypogeum of "San Pietro Barisano" rupestrian church, located in the Matera-Sassi (Southern Italy), one of the UNESCO World Heritage sites. The study evaluated the biocide activity of a mixture of natural glycoalkaloids (GAs) extracted from the unripe fruit of Solanum nigrum and applied to clean a hypogeum wall surface in the church affected by bio-patinas. The analyzed bio-patina, collected before treatment and, at pre-established times, after treatment, showed changes in chemical composition detected by XPS, accompanied by visible discoloration and biological activity variation. The biocidal action of the glycoalkaloids mixture, directly employed on the wall surface, was effective after about four weeks for most bio-patina colonizers but not for the fungal species that can migrate and survive in the porosities of the calcarenite. Consequently, the cleaning procedure requires the integration of fungicidal actions, combined with the consolidation of the surfaces, to obtain complete bioremediation and avoid subsequent biological recolonization. SEM images and associated microanalysis of pretreated bio-patina have revealed the biocalcogenity of some autochthonous microorganisms, thus preluding to their eventual isolation and reintroduction on the wall surface to act as consolidants once the bio-cleaning phase has been completed.

Highly Efficient Biotransformation and Production of Selenium Nanoparticles and Polysaccharides Using Potential Probiotic Bacillus subtilis T5

Selenium is an essential microelement required for human health. The biotransformation of selenium nanoparticles has attracted increasing attention in recent years. However, little of the literature has investigated the comprehensive evaluation of the strains for practical application and the effect on the functional properties in the existence of Se. The present study showed the selenite reduction strain Bacillus subtilis T5 (up to 200 mM), which could produce high yields of selenium polysaccharides and selenium nanoparticles in an economical and feasible manner. Biosynthesized selenium nanoparticles by B. subtilis T5 were characterized systematically using UV-vis spectroscopy, FTIR, Zeta Potential, DLS, and SEM techniques. The biosynthesized SeNPs exhibited high stability with small particle sizes. B. subtilis T5 also possessed a tolerance to acidic pH and bile salts, high aggregation, negative hemolytic, and superior antioxidant activity, which showed excellent probiotic potential and can be recommended as a potential candidate for the selenium biopharmaceuticals industry. Remarkably, B. subtilis T5 showed that the activity of α-amylase was enhanced with selenite treatment to 8.12 U/mL, 2.72-fold more than the control. The genus Bacillus was first reported to produce both selenium polysaccharides with extremely high Se-content (2.302 g/kg) and significantly enhance the activity to promote α-amylase with selenium treatment. Overall, B. subtilis T5 showed potential as a bio-factory for the biosynthesized SeNPs and organ selenium (selenium polysaccharide), providing an appealing perspective for the biopharmaceutical industry.

Enhancing phosphorus recovery from efficient acidogenic fermentation of waste activated sludge with acidic cation exchange resin pretreatment: Insights from occurrence states and transformation

Achieving phosphorus (P) recovery during treatment and disposal of waste activated sludge (WAS) by anaerobic-based processes has received increasing attention. To solve the problem of low phosphorus release efficiency, anaerobic fermentation (AF) combined with acidic cation exchange resin (ACER) pretreatment was first proposed in this study. Results showed that the isoelectric point pretreatment with ACER increased the recoverable phosphorus content by 2.3 times compared to that without ACER pretreatment. Phosphorus transformation was systematically analyzed from a whole-process perspective, and the results visually revealed that the release of phosphorus during the conventional AF process (without ACER pretreatment) was limited by insufficient phosphorus release from extracellular polymeric substances (EPS) and mineral precipitation, as well as the reprecipitation of soluble phosphorus with metals. ACER enabled effective dissolution of mineral phosphorus by acidifying WAS. On the other hand, ACER adsorbed metals to promote EPS disintegration and hydrolysis, thereby enhancing the release of EPS-bound P, which also reduced the reprecipitation of soluble phosphorus during AF. Furthermore, ACER pretreatment increased volatile fatty acids production by >2-fold with enhanced sludge hydrolysis. This finding has important implications for both non-renewable phosphorus recovery and sludge resource recovery.

Variable pH and subsequent change in pCO2 modulates the biofilm formation, synthesis of extracellular polymeric substances, and survivability of a marine bacterium Bacillus stercoris GST-03

Biofilm-forming bacteria adhere to the substrates and engage in the nutrient cycling process. However, environmental conditions may interrupt the biofilm formation ability, which ultimately may affect various biogeochemical cycles. The present study reports the effect of varying pH and subsequent change in pCO₂ on the survivability, biofilm formation, and synthesis of extracellular polymeric substances (EPS) of a biofilm-forming marine bacterium Bacillus stercoris GST-03 isolated from the Bhitarkanika mangrove ecosystem, Odisha, India. Understanding the pH-dependent alteration in EPS constituents, and associated functional groups of a marine bacterium will provide better insight into the adaptability of the bacteria in future ocean acidification scenarios. The strain was found to tolerate and form biofilm up to pH 4, with the maximum biofilm formation at pH 6. EPS yield and the synthesis of the key components of the EPS, including carbohydrate, protein, and lipid, were found maximum at pH 6. Changes in biofilm formation patterns and various topological parameters at varying pH/pCO₂ conditions were observed. A cellular chaining pattern was observed at pH 4, and maximum biofilm formation was obtained at pH 6 with biomass of 5.28582 ± 0.5372 μm³/μm² and thickness of 9.982 ± 1.5288 μm. Structural characterization of EPS showed changes in various functional groups of constituent macromolecules with varying pH. The amorphous nature of the EPS and the changes in linkages and associated functional groups (-R₂CHOR, -CH₃, and -CH₂) with pH variation was confirmed. EPS showed a two-step degradation with a maximum weight loss of 59.147% and thermal stability up to 480 °C at pH 6. The present work efficiently demonstrates the role of EPS in providing structural and functional stability to the biofilm in varying pH conditions. The findings will provide a better understanding of the adaptability of marine bacteria in the future effect of ocean acidification.

A novel pre-magnetized ZVI/PS pretreatment for improving sludge dewaterability: The role of EPS fractions

The dewaterability of waste-activated sludge (WAS) has been extensively examined using zero-valent iron (ZVI)-based advanced oxidation processes (AOPs). However, the high dosage and low utilization efficiencies of ZVI cast doubt on the dependability and viability of ZVI-based AOPs. In this study, we successfully demonstrated pre-magnetization as an efficient, chemical-free, and ecological method for improving the efficiency of sludge dewatering by ZVI/persulfate (PS) process, in which the reduction ratios of capillary suction time (CST) and specific resistance to filtration (SRF) increased by 8.67% and 11.06% under optimal conditions, respectively. The highly active Fe²⁺ released during ZVI corrosion may be more essential than ZVI itself during PS activation, which could be strengthened by pre-magnetization. Both homogeneous and heterogeneous Fe²⁺ could react with PS to produce aqueous hydroxyl radicals (∙OH) and sulfate radicals (SO₄^-∙) as well as surface-bound ∙OH and SO₄^-∙, further decomposing bound-extracellular polymeric substances fractions, broking hydrophilic functional groups and compounds, altering protein secondary structure to expose more hydrophobic sites, and releasing abundant EPS-bound water. Due to the protection of tightly-bound extracellular polymeric substances (TB-EPS) and the competitive oxidation of organics released during the early disintegration stage, radical oxidation primarily occurs at extracellular levels, releasing a bit of intracellular water. Besides, polysaccharides in TB-EPS may function a more significant role in flocculation than proteins, and a porous structure favorable to drainage will be formed after the pre-magnetized ZVI/PS treatment. The cost-benefit analysis further reveals that the Pre-ZVI/PS process presents high reusability and utilization, making it potential for particle application in sludge dewatering.

Effects of extracellular polymeric substances on the aggregation of Aphanizomenon flos-aquae under increasing temperature

Aphanizomenon flos-aquae (A. flos-aquae) blooms are serious environmental and ecological problems. Extracellular polymeric substances (EPSs) are among the most important indicators for the growth and aggregation of A. flos-aquae. In this study, the secretion of the EPS matrix under temperature rise (7-37°C) was investigated and the role of this matrix in A. flos-aquae aggregation was quantified. First, when the temperature increased, the aggregation ratio increased from 41.85 to 91.04%. Meanwhile, we found that when soluble EPSs (S-EPSs), loosely bound EPSs (LB-EPSs), and tightly bound EPSs (TB-EPSs) were removed successively, the aggregation ratio decreased from 69.29 to 67.45%, 61.47%, and 41.14%, respectively. Second, the content of polysaccharides in the EPS matrix was higher than the content of proteins under temperature change. The polysaccharide in TB-EPSs was closely related to the aggregation ability of A. flos-aquae (P < 0.01). Third, PARAFAC analysis detected two humic-like substances and one protein-like substance in EPSs. Furthermore, Fourier transforms infrared spectroscopy (FTIR) showed that with increasing temperature, the polysaccharide-related functional groups increased, and the absolute value of the zeta potential decreased. In conclusion, these results indicated that a large number of polysaccharides in TB-EPSs were secreted under increasing temperature, and the polysaccharide-related functional groups increased correspondingly, which reduced the electrostatic repulsion between algal cells, leading to the destruction of the stability of the dispersion system, and then the occurrence of aggregation. This helps us to understand the process of filamentous cyanobacterial aggregation in lakes.

Facile nitrogen doping in fungal hyphae-derived biochars via cooperation of microbial culture and pyrolysis for efficient catalytic reduction of 4-nitrophenol

Manipulating the elemental composition is one major strategy to tune the properties of biochars to endow different functions to meet various application requirements. Compared with the widely reported plants- and manure-based precursors for biochars, microbes-based precursors take the lead in regional independency, rapid growth, morphology uniformity and abundant species with different adjustable elemental composition. In this work, fungal hyphae with massive microtubule structure were selected as a typical microbe precursor to prepare biochars whose catalysis capability was further evaluated by a representative reduction reaction of 4-nitrophenol (4-NP) using sodium borohydride as reductant. By simply increasing the nitrogen concentration in the culturing medium, the fungal hyphae derived biochars with increased nitrogen contents (2.1 wt% → 4.3 wt%) were successfully obtained after pyrolysis, showing almost two times higher catalysis ability (4.75 × 10^-2 s^-1 → 7.26 × 10^-2 s^-1) towards 4-nitrophenol. The Arrhenius equation calculation further proved that the more doping of nitrogen would increase the active sites rather than altering the reaction pathway. A high surface area of 997 m² g^-1 at pyrolysis temperature of 800 °C was obtained resulting from the fine microstructure of fungal hyphae. Higher pyrolysis temperature derived biochars remarkably promote their catalysis ability. These results indicated that biochars with controllable nitrogen contents can be prepared by cooperating culturing and pyrolysis processes, which pointed out an easy, rapid, scalable, and promising way to synthesis biochars with tunable functions for different applications.

Retention of thallium(I) on goethite, hematite, and manganite: Quantitative insights and mechanistic study

The reversibility of monovalent thallium (Tl) absorption on widely distributed iron/manganese secondary minerals may affect environmental Tl migration and global cycling. Nevertheless, quantitative and mechanistic studies on the interfacial retention and release reactions involving Tl(I) are limited. In this study, batch and stirred-flow experiments, unified kinetics modeling, spectral detection, and theoretical calculations were used to elucidate the retention behaviors of Tl(I) on goethite, hematite, and manganite with different solution pH values and Tl loading concentrations. Sustained Tl(I) retention (k_{d, MeOHTl}=0.005∼0.018 min^-1) was induced by hydration of the surface hydroxyl groups. Rapid Tl(I) retention (k_d,MeOTlOH=1.232∼2.917 min^-1) was enhanced by the abundant hydroxide ions and deprotonated hydroxyl groups, which increased the Tl(I) binding ability. Compared to the ambient Tl concentration, pH had a more substantial effect on the formation and distribution of surface Tl(I) binding species. In alkaline environments, the large adsorption energy for Tl(I) binding to surface species (E_ads=-6.14 eV) induced fast Tl(I) binding response on the surfaces of iron/manganese secondary minerals. This study provides new insights into the heterogeneous surface complexation and retention behaviors of Tl(I) and contributes to an in-depth understanding of the environmental fate of Tl and the remediation of Tl contamination.

Induced aging, structural change, and adsorption behavior modifications of microplastics by microalgae

The effects of microalgal biofouling on microplastic (MP) may differ from bacterial biofouling. In this study, the influence of microalgae on MP surface alteration, structural change, and adsorption of organic micropollutants was evaluated. Virgin polyethylene (PE), polyvinyl chloride (PVC), and polyamide (PA) were each immersed in algal photobioreactor and river freshwater for 30 days to simulate algal and river microbe biofouling respectively. Consequently, their physicochemical changes and adsorption potential of a mixture of six bisphenol analogues (BPA, BPS, BPE, BPB, BPF, BPAF) and two parabens (propyl-paraben, benzyl-paraben) were investigated. Owing to the algal bioactive compounds, major microalgae-induced biofouling and more MP aging than the river microbe aging were observed through fractures, pits, cracks, and algal attachments. Intrusion of algal organic matter and scission of polymeric functional groups were revealed during microalgal immersion and the potential MP aging pathways were proposed. Algal biofouling considerably altered the intrinsic properties of the MPs, consequently the adsorption capacity of PE and PVC was enhanced by 3.04-6.72 and 2.14-8.72 times, respectively. Adsorption process onto algal-aged MPs was pH-dependent, endothermic, non-spontaneous, and favored by hydrogen bonds. Meanwhile, the amide group in PA structure was conducive to organic micropollutant adsorption, which was likely reduced by algal aging and the erosion of the N-H stretching. Moreover, higher adsorption capacities of organic micropollutants were shown by the algal-biofilm PE and PVC than virgin and river microbial biofilm MPs. This study discloses that, biofouling and aging of MPs by microalgae through their bioactive components would engender more incidences on MP properties, organic micropollutants adsorption with associated environmental and health hazards.

Direct observation of humic acid-promoted hydrolysis of phytate through stabilizing a conserved catalytic domain in phytase

As a potential phosphorus (P) pool, the enzymatic hydrolysis of organic phosphorus (P_o) is of fundamental importance due to the release of bioavailable inorganic phosphate (P_i) for agronomic P sustainability. However, little is known about the role of soil organic matter (SOM) in the hydrolysis process of phytate by phytase and the subsequent chemical behaviors involving the hydrolysis product (P_i) at different soil interfaces. Here, by using liquid-cell atomic force microscopy (AFM), we present a model system to in situ quantify the nucleation kinetics of phytase-released P_i when precipitating with representative soil multivalent cations (Ca²⁺/Fe³⁺) on typical soil mineral/organic interfaces in the presence/absence of humic acid (HA), which involves complex phytase-interface-HA interactions. We observed that a higher HA concentration resulted in a faster nucleation rate of amorphous calcium/iron phosphate (ACP/AIP) on bare and organically-coated (-OH/-COOH) mica surfaces compared with the HA-free control. Besides, the nucleation rate of ACP/AIP induced by organic interfaces was much more significant than that induced by clay mineral interfaces. By combining enzyme activity/stability experiments and AFM-based PeakForce quantitative nanomechanical mapping (PF-QNM) measurements, we directly quantified the contribution of noncovalent phytase-HA interaction to the increase in enzymatic activity from complex phytase-interface-HA interactions. Furthermore, the direct complexation of phytase-HA resulted in the stabilization of a conserved active catalytic domain (ACD) in phytase through the enhanced formation of both an ordered, stereochemically-favored catalytic domain and an unordered non-catalytic domain, which was revealed by Raman secondary structure determination. The results provide direct insights into how HA regulates the catalytic activity of phytase controlling P_o fates and how soil interfaces determine the behaviors of released P_i to affect its availability, and thereby contribute to P sustainability in soils.

Molecular spectroscopy and docking simulation revealed the binding mechanism of phenol onto anammox sludge extracellular polymeric substances

The rapid development of chemical industry has induced to the large amount of phenolic wastewater production. When the promising anaerobic ammonium oxidation (anammox) was employed to treat the industrial wastewater, phenolic compounds would possibly inhibit the microbial performance. Extracellular polymeric substances (EPSs) play an essential role in protecting cells from being intoxicated by phenolic compound while the distinct mechanism remains elusive. In this work, the interaction of phenol with anammox sludge EPSs and transmembrane ammonium transport (Amt) domain was explored at molecular level by using spectral method and molecular docking simulation. It was found that phenol statically quenched the fluorescent components of EPSs and the protein component dominated the interaction between EPSs and phenol. The overall interaction was an entropy-driven process with hydrophobic interaction as the main driving force, and the CO vibration responded preferentially. As phenol continued to penetrate into the cell surface, there were hydrogen bond, hydrophobic interaction force and π-π base-stacking forces between the Amt domain and phenol. The interaction between phenol and amino acid residues of the Amt domain would interfere the NH₄⁺ transport and further affect the activity of anammox sludge. This work is beneficial for in-depth understanding the role of EPSs in protecting anammox sludge from inhibiting by phenolic pollutants.

Effect of Culture pH on Properties of Exopolymeric Substances from Synechococcus PCC7942: Implications for Carbonate Precipitation

The role of culture conditions on the production of exopolymeric substances (EPS) by Synechococcus strain PCC7942 was investigated. Carbonate mineral precipitation in these EPS was assessed in forced precipitation experiments. Cultures were grown in HEPES-buffered medium and non-buffered medium. The pH of buffered medium remained constant at 7.5, but in non-buffered medium it increased to 9.5 within a day and leveled off at 10.5. The cell yield at harvest was twice as high in non-buffered medium than in buffered medium. High molecular weight (>10 kDa) and low molecular weight (3–10 kDa) fractions of EPS were obtained from both cultures. The cell-specific EPS production in buffered medium was twice as high as in non-buffered medium. EPS from non-buffered cultures contained more negatively charged macromolecules and more proteins than EPS from buffered cultures. The higher protein content at elevated pH may be due to the induction of carbon-concentrating mechanisms, necessary to perform photosynthetic carbon fixation in these conditions. Forced precipitation showed smaller calcite carbonate crystals in EPS from non-buffered medium and larger minerals in polymers from buffered medium. Vaterite formed only at low EPS concentrations. Experimental results are used to conceptually model the impact of pH on the potential of cyanobacterial blooms to produce minerals. We hypothesize that in freshwater systems, small crystal production may benefit the picoplankton by minimizing the mineral ballast, and thus prolonging the residence time in the photic zone, which might result in slow sinking rates.

Physicochemical methods for biofilm removal allow for control of biofilm retention time in a high rate MBBR

Controlling biofilm retention time in moving bed biofilm reactor (MBBR) and maintaining its performance for A-stage carbon redirection requires a reliable method to use as side stream biocarriers treatment. This paper investigates biofilm detachment and residual biofilm activity under multiple physicochemical treatment scenarios aiming to provide an applicable technique for control of biofilm retention time. Different mixing intensities (i.e. 30-120 rpm), filling fractions (i.e. 20%-100%), and pH (i.e. 2-12) were evaluated. Two continuously operating MBBRs were subjected to pH shocks of 2 and 12 to evaluate the impact of residual acidic or alkaline compounds on performance. The highest solids detachment (i.e. 70 ± 5%) was found in alkaline conditions and independent of mixing intensity and filling fraction. Biofilm detachment test revealed that alkaline shock produced higher detachment levels in a longer exposure time when compared to acidic conditions. The kinetic tests revealed 60% and 90% of the residual biofilm activity was lost at pH 12 and 2. The continuously operating MBBRs subjected to pH shocks of 2 and 12 demonstrated a 50% loss of soluble COD removal capability within one hydraulic retention time. Extracellular polymeric substances changes in its structure and surface properties influencing the degree of biofilm detachment and its solubilization properties leading to differences in biofilm resilience. The findings have shown that by applying a side stream alkali treatment it could be possible to control biofilm retention time ensuring its detachment up to 70% and a reduced impact on the residual biofilm activity returning to the reactor.

Coupling of membrane-based bubbleless micro-aeration for 2,4-dinitrophenol degradation in a hydrolysis acidification reactor

Micro-aeration hydrolysis acidification (HA) is an effective method to enhance the removal of toxic and refractory organic matter, but the difficulty in stable dosing control of trace oxygen limits its wide application. Membrane-based bubbleless aeration has been proved as an ideal aeration method because of its higher oxygen transfer rate, more uniform mass transfer, and lower cost than HA. However, the available information on its application in HA is limited. In this study, membrane-based bubbleless micro-aeration coupled with hydrolysis acidification (MBL-MHA) was exploited to investigate the performance of 2,4-dinitrophenol (2,4-DNP) degradation via comparing it with bubble micro-aeration HA (MHA) and anaerobic HA. The results indicated that the performances in MBL-MHA and MHA were higher than those in HA during the experiment. 2,4-DNP degradation rates under redox microenvironments caused by counter-diffusion in MBL-MHA (84.43∼97.28%) were higher than those caused by co-diffusion in MHA (82.41∼94.71%) under micro-aeration of 0.5-5.0 mL air/min. The 2,4-DNP degradation pathways in MBL-MHA were nitroreduction, deamination, aromatic ring cleavage, and fermentation, while those in MHA were hydroxylation, aromatic ring cleavage, and fermentation. Reduction/oxidation-related, interspecific electron transfer-related species, and fermentative species in MBL-MHA were more abundant than that in MHA. Ultimately, more reducing/oxidizing forces formed by more redox proteins/enzymes from these rich species could enhance 2,4-DNP degradation in MBL-MHA.

Insights into removal of sulfonamides in anaerobic activated sludge system: Mechanisms, degradation pathways and stress responses

The fate of antibiotics in activated sludge has attracted increasing interests. However, the focus needs to shift from concerning removal efficiencies to understanding mechanisms and sludge responding to antibiotic toxicity. Herein, we operated two anaerobic sequencing batch reactors (ASBRs) for 200 days with sulfadiazine (SDZ) and sulfamethoxazole (SMX) added. The removal efficiency of SMX was higher than that of SDZ. SDZ was removed via adsorption (9.91-21.18%) and biodegradation (10.20-16.00%), while biodegradation (65.44-86.26%) was dominant for SMX removal. The mechanisms involved in adsorption and biodegradation were investigated, including adsorption strength, adsorption sites and the roles of enzymes. Protein-like substance (tryptophan) functioned vitally in adsorption by forming complexes with sulfonamides. P450 enzymes may catalyze sulfonamides degradation via hydroxylation and desulfurization. Activated sludge showed distinct responses to different sulfonamides, reflected in the changes of microbial communities and functions. These responses were related to sulfonamides removal, corresponding to the stronger adsorption capacity of activated sludge in ASBR-SDZ and degradation capacity in ASBR-SMX. Furthermore, the reasons for different removal efficiencies of sulfonamides were analyzed according to steric and electronic effects. These findings propose insights into antibiotic removal and broaden the knowledge for self-protection mechanisms of activated sludge under chronic toxicities of antibiotics.

Insight into the structure and metabolic function of iron-rich nanoparticles in anammox bacteria

Anaerobic ammonium-oxidizing (anammox) bacteria are iron abundant and depend heavily on iron-binding proteins. The iron demand of anammox bacteria is relatively large. However, it still remains some doubts where these large quantities of available iron come from and how they are regulated in anammox bacteria. Herein, iron-rich nanoparticles in anammoxosomes were detected by synchrotron soft X-ray tomography coupled with scanning transmission X-ray microscopy (STXM). The iron-rich nanoparticles were identified as ferric oxide (α-Fe₂O₃) mineral cores, and the local atomic structure of iron-rich nanoparticles was obtained by X-ray absorption fine-structure (XAFS) spectra. The bacterioferritin of Q1Q315 and Q1Q5F8 were detected by proteomics analysis. On this basis, the metabolic pathway centered on iron-rich nanoparticles was proposed.

Controlling pore-scale processes to tame subsurface biomineralization

Microorganisms capable of biomineralization can catalyze mineral precipitation by modifying local physical and chemical conditions. In porous media, such as soil and rock, these microorganisms live and function in highly heterogeneous physical, chemical and ecological microenvironments, with strong local gradients created by both microbial activity and the pore-scale structure of the subsurface. Here, we focus on extracellular bacterial biomineralization, which is sensitive to external heterogeneity, and review the pore-scale processes controlling microbial biomineralization in natural and engineered porous media. We discuss how individual physical, chemical and ecological factors integrate to affect the spatial and temporal control of biomineralization, and how each of these factors contributes to a quantitative understanding of biomineralization in porous media. We find that an improved understanding of microbial behavior in heterogeneous microenvironments would promote understanding of natural systems and output in diverse technological applications, including improved representation and control of fluid mixing from pore to field scales. We suggest a range of directions by which future work can build from existing tools to advance each of these areas to improve understanding and predictability of biomineralization science and technology.