Exchange magnetostriction in two-dimensional antiferromagnets

Spin-Mechanical Coupling in 2D Antiferromagnet CrSBr

Spin-mechanical coupling is vital in diverse fields including spintronics, sensing, and quantum transduction. Two-dimensional (2D) magnetic materials provide a unique platform for investigating spin-mechanical coupling, attributed to their mechanical flexibility and novel spin orderings. However, studying their spin-mechanical coupling presents challenges in probing mechanical deformation and thermodynamic property changes at the nanoscale. Here we use nano-optoelectromechanical interferometry to mechanically detect the phase transition and magnetostriction effect in multilayer CrSBr, an air-stable antiferromagnet with large magnon-exciton coupling. The transitions among antiferromagnetism, spin-canted ferromagnetism, and paramagnetism are visualized. Nontrivial magnetostriction coefficient 2.3 × 10-5 and magnetoelastic coupling strength on the order of 106 J/m3 have been found. Moreover, we demonstrate the substantial tunability of the magnetoelastic constant by nearly 50% via gate-induced strain. Our findings demonstrate the strong spin-mechanical coupling in CrSBr and pave the way for developing sensitive magnetic sensing and efficient quantum transduction at the atomically thin limit.

Spin-Phonon Coupling in Iron-Doped Ultrathin Bismuth Halide Perovskite Derivatives

Spin in semiconductors facilitates magnetically controlled optoelectronic and spintronic devices. In metal halide perovskites (MHPs), doping magnetic ions is proven to be a simple and efficient approach to introducing a spin magnetic momentum. In this work, we present a facile metal ion doping protocol through the vapor-phase metal halide insertion reaction to the chemical vapor deposition (CVD)-grown ultrathin Cs3BiBr6 perovskites. The Fe-doped bismuth halide (Fe:CBBr) perovskites demonstrate that the iron spins are successfully incorporated into the lattice, as revealed by the spin-phonon coupling below the critical temperature Tc around 50 K observed through temperature-dependent Raman spectroscopy. Furthermore, the phonons exhibit significant softening under an applied magnetic field, possibly originating from magnetostriction and spin exchange interaction. The spin-phonon coupling in Fe:CBBr potentially provides an efficient way to tune the spin and lattice parameters for halide perovskite-based spintronics.

Emerging Spintronic Materials and Functionalities

The explosive growth of the information era has put forward urgent requirements for ultrahigh-speed and extremely efficient computations. In direct contrary to charge-based computations, spintronics aims to use spins as information carriers for data storage, transmission, and decoding, to help fully realize electronic device miniaturization and high integration for next-generation computing technologies. Currently, many novel spintronic materials have been developed with unique properties and multifunctionalities, including organic semiconductors (OSCs), organic-inorganic hybrid perovskites (OIHPs), and 2D materials (2DMs). These materials are useful to fulfill the demand for developing diverse and advanced spintronic devices. Herein, these promising materials are systematically reviewed for advanced spintronic applications. Due to the distinct chemical and physical structures of OSCs, OIHPs, and 2DMs, their spintronic properties (spin transport and spin manipulation) are discussed separately. In addition, some multifunctionalities due to photoelectric and chiral-induced spin selectivity (CISS) are overviewed, including the spin-filter effect, spin-photovoltaics, spin-light emitting devices, and spin-transistor functions. Subsequently, challenges and future perspectives of using these multifunctional materials for the development of advanced spintronics are presented.

Controlling the 2D Magnetism of CrBr3 by van der Waals Stacking Engineering

The manipulation of two-dimensional (2D) magnetic order is of significant importance to facilitate future 2D magnets for low-power and high-speed spintronic devices. van der Waals stacking engineering makes promises for controllable magnetism via interlayer magnetic coupling. However, directly examining the stacking order changes accompanying magnetic order transitions at the atomic scale and preparing device-ready 2D magnets with controllable magnetic orders remain elusive. Here, we demonstrate the effective control of interlayer stacking in exfoliated CrBr3 via thermally assisted strain engineering. The stable interlayer ferromagnetic (FM), antiferromagnetic (AFM), and FM-AFM coexistent ground states confirmed by the magnetic circular dichroism measurements are realized. Combined with the first-principles calculations, the atomically resolved imaging technique reveals the correlation between magnetic order and interlayer stacking order in CrBr3 flakes unambiguously. A tunable exchange bias effect is obtained in the mixed phase of FM and AFM states. This work will introduce new magnetic properties by controlling the stacking order and sequence of 2D magnets, providing ample opportunities for their application in spintronic devices.

Magnetic order in 2D antiferromagnets revealed by spontaneous anisotropic magnetostriction

The temperature dependent order parameter provides important information on the nature of magnetism. Using traditional methods to study this parameter in two-dimensional (2D) magnets remains difficult, however, particularly for insulating antiferromagnetic (AF) compounds. Here, we show that its temperature dependence in AF MPS3 (M(II) = Fe, Co, Ni) can be probed via the anisotropy in the resonance frequency of rectangular membranes, mediated by a combination of anisotropic magnetostriction and spontaneous staggered magnetization. Density functional calculations followed by a derived orbital-resolved magnetic exchange analysis confirm and unravel the microscopic origin of this magnetization-induced anisotropic strain. We further show that the temperature and thickness dependent order parameter allows to deduce the material's critical exponents characterising magnetic order. Nanomechanical sensing of magnetic order thus provides a future platform to investigate 2D magnetism down to the single-layer limit.

Probing Linear to Nonlinear Damping in 2D Semiconductor Nanoelectromechanical Resonators toward a Unified Quality Factor Model

In resonant nanoelectromechanical systems (NEMS), the quality (Q) factor is essential for sensing, communication, and computing applications. While a large vibrational amplitude is useful for increasing the signal-to-noise ratio, the damping in this regime is more complex because both linear and nonlinear damping are important, and an accurate model for Q has not been fully explored. Here, we demonstrate that by combining the time-domain ringdown and frequency-domain resonance measurements, we extract the accurate Q for two-dimensional (2D) MoS2 and MoTe2 NEMS resonators at different vibration amplitudes. In particular, in the transition region between linear and nonlinear damping, Q can be precisely extracted by fitting to the ringdown characteristics. By varying AC driving, we tune the Q by ΔQ/Q = 269% and extract the nonlinear damping coefficient. We develop the dissipation model that well captures the linear to nonlinear damping, providing important insights for accurately modeling and optimizing Q in 2D NEMS resonators.

Thermo-Magnetostrictive Effect for Driving Antiferromagnetic Two-Dimensional Material Resonators

Magnetostrictive coupling has recently attracted interest as a sensitive method for studying magnetism in two-dimensional (2D) materials by mechanical means. However, its application in high-frequency magnetic actuators and transducers requires rapid modulation of the magnetic order, which is difficult to achieve with external magnets, especially when dealing with antiferromagnets. Here, we optothermally modulate the magnetization in antiferromagnetic 2D material membranes of metal phosphor trisulfides (MPS3), to induce a large high-frequency magnetostrictive driving force. From the analysis of the temperature-dependent resonance amplitude, we provide evidence that the force is due to a thermo-magnetostrictive effect, which significantly increases near the Neél temperature, due to the strong temperature dependence of the magnetization. By studying its angle dependence, we find the effect is observed to follow anisotropic magnetostriction of the crystal lattice. The results show that the thermo-magnetostrictive effect results in a strongly enhanced thermal expansion force near the critical temperature of magnetostrictive 2D materials, which can enable more efficient actuation of nano-magnetomechanical devices and can also provide a route for studying the high-frequency coupling among magnetic, mechanical, and thermodynamic degrees of freedom down to the 2D limit.

Spin-mediated shear oscillators in a van der Waals antiferromagnet

Understanding how microscopic spin configuration gives rise to exotic properties at the macroscopic length scale has long been pursued in magnetic materials1-5. One seminal example is the Einstein-de Haas effect in ferromagnets1,6,7, in which angular momentum of spins can be converted into mechanical rotation of an entire object. However, for antiferromagnets without net magnetic moment, how spin ordering couples to macroscopic movement remains elusive. Here we observed a seesaw-like rotation of reciprocal lattice peaks of an antiferromagnetic nanolayer film, whose gigahertz structural resonance exhibits more than an order-of-magnitude amplification after cooling below the Néel temperature. Using a suite of ultrafast diffraction and microscopy techniques, we directly visualize this spin-driven rotation in reciprocal space at the nanoscale. This motion corresponds to interlayer shear in real space, in which individual micro-patches of the film behave as coherent oscillators that are phase-locked and shear along the same in-plane axis. Using time-resolved optical polarimetry, we further show that the enhanced mechanical response strongly correlates with ultrafast demagnetization, which releases elastic energy stored in local strain gradients to drive the oscillators. Our work not only offers the first microscopic view of spin-mediated mechanical motion of an antiferromagnet but it also identifies a new route towards realizing high-frequency resonators8,9 up to the millimetre band, so the capability of controlling magnetic states on the ultrafast timescale10-13 can be readily transferred to engineering the mechanical properties of nanodevices.

Two-Dimensional Magnetic Semiconducting Heterostructures of Single-Layer CrI3-CrI2

Single-layer heterostructures of magnetic materials are unique platforms for studying spin-related phenomena in two dimensions (2D) and have promising applications in spintronics and magnonics. Here, we report the fabrication of 2D magnetic lateral heterostructures consisting of single-layer chromium triiodide (CrI₃) and chromium diiodide (CrI₂). By carefully adjusting the abundance of iodine based on molecular beam epitaxy, single-layer CrI₃-CrI₂ heterostructures were grown on Au(111) surfaces with nearly atomic-level seamless boundaries. Two distinct types of interfaces, i.e., zigzag and armchair interfaces, have been identified by means of scanning tunneling microscopy. Our scanning tunneling spectroscopy study combined with density functional theory calculations indicates the existence of spin-polarized ground states below and above the Fermi energy localized at the boundary. Both the armchair and zigzag interfaces exhibit semiconducting nanowire behaviors with different spatial distributions of density of states. Our work presents a novel low-dimensional magnetic system for studying spin-related physics with reduced dimensions and designing advanced spintronic devices.

Effect of High-Anisotropic Co2+ Substitution for Ni2+ on the Structural, Magnetic, and Magnetostrictive Properties of NiFe2O4: Implications for Sensor Applications

This work reports on the effect of substituting a low-anisotropic and low-magnetic cation (Ni²⁺, 2μ_B) by a high-anisotropic and high-magnetic cation (Co²⁺, 3μ_B) on the crystal structure, phase, microstructure, magnetic properties, and magnetostrictive properties of NiFe₂O₄ (NFO). Co-substituted NFO (Ni_1-xCo_xFe₂O₄, NCFO, 0 ≤ x ≤ 1) nanomaterials were synthesized using glycine-nitrate autocombustion followed by postsynthesis annealing at 1200 °C. The X-ray diffraction measurements coupled with Rietveld refinement analyses indicate the significant effect of Co-substitution for Ni, where the lattice constant (a) exhibits a functional dependence on composition (x). The a-value increases from 8.3268 to 8.3751 Å (±0.0002 Å) with increasing the "x" value from 0 to 1 in NCFO. The a-x functional dependence is derived from the ionic-size difference between Co²⁺ and Ni²⁺, which also induces grain agglomeration, as evidenced in electron microscopy imaging. The chemical bonding of NCFO, as probed by Raman spectroscopy, reveals that Co(x)-substitution induced a red shift of the T_2g(2) and A_1g(1) modes, and it is attributed to the changes in the metal-oxygen bond length in the octahedral and tetrahedral sites in NCFO. X-ray photoelectron spectroscopy confirms the presence of Co²⁺, Ni²⁺, and Fe³⁺ chemical states in addition to the cation distribution upon Co-substitution in NFO. Chemical homogeneity and uniform distribution of Co, Ni, Fe, and O are confirmed by EDS. The magnetic parameters, saturation magnetization (M_S), remnant magnetization (M_r), coercivity (H_C), and anisotropy constant (K₁) increased with increasing Co-content "x" in NCFO. The magnetostriction (λ) also follows a similar behavior and almost linearly varies from -33 ppm (x = 0) to -227 ppm (x = 1), which is primarily due to the high magnetocrystalline anisotropy contribution from Co²⁺ ions at the octahedral sites. The magnetic and magnetostriction measurements and analyses indicate the potential of NCFO for torque sensor applications. Efforts to optimize materials for sensor applications indicate that, among all of the NCFO materials, Co-substitution with x = 0.5 demonstrates high strain sensitivity (-2.3 × 10^-9 m/A), which is nearly 2.5 times higher than that obtained for their intrinsic counterparts, namely, NiFe₂O₄ (x = 0) and CoFe₂O₄ (x = 1).

Evidence for Topological Magnon-Phonon Hybridization in a 2D Antiferromagnet down to the Monolayer Limit

Topological phonons and magnons potentially enable low-loss, quantum coherent, and chiral transport of information and energy at the atomic scale. Van der Waals magnetic materials are promising to realize such states due to their recently discovered strong interactions among the electronic, spin, and lattice degrees of freedom. Here, we report the first observation of coherent hybridization of magnons and phonons in monolayer antiferromagnet FePSe₃ by cavity-enhanced magneto-Raman spectroscopy. The robust magnon-phonon cooperativity in the 2D limit occurs even in zero magnetic field, which enables nontrivial band inversion between longitudinal and transverse optical phonons caused by the strong coupling with magnons. The spin and lattice symmetry theoretically guarantee magnetic-field-controlled topological phase transition, verified by nonzero Chern numbers calculated from the coupled spin-lattice model. The 2D topological magnon-phonon hybridization potentially offers a new route toward quantum phononics and magnonics with an ultrasmall footprint.

Correlation-Driven Topological Transition in Janus Two-Dimensional Vanadates

The appearance of intrinsic ferromagnetism in 2D materials opens the possibility of investigating the interplay between magnetism and topology. The magnetic anisotropy energy (MAE) describing the easy axis for magnetization in a particular direction is an important yardstick for nanoscale applications. Here, the first-principles approach is used to investigate the electronic band structures, the strain dependence of MAE in pristine VSi₂Z₄ (Z = P, As) and its Janus phase VSiGeP₂As₂ and the evolution of the topology as a function of the Coulomb interaction. In the Janus phase the compound presents a breaking of the mirror symmetry, which is equivalent to having an electric field, and the system can be piezoelectric. It is revealed that all three monolayers exhibit ferromagnetic ground state ordering, which is robust even under biaxial strains. A large value of coupling J is obtained, and this, together with the magnetocrystalline anisotropy, will produce a large critical temperature. We found an out-of-plane (in-plane) magnetization for VSi₂P₄ (VSi₂As₄), and an in-plane magnetization for VSiGeP₂As₂. Furthermore, we observed a correlation-driven topological transition in the Janus VSiGeP₂As₂. Our analysis of these emerging pristine and Janus-phased magnetic semiconductors opens prospects for studying the interplay between magnetism and topology in two-dimensional materials.

Graphene and Beyond: Recent Advances in Two-Dimensional Materials Synthesis, Properties, and Devices

Since the isolation of graphene in 2004, two-dimensional (2D) materials research has rapidly evolved into an entire subdiscipline in the physical sciences with a wide range of emergent applications. The unique 2D structure offers an open canvas to tailor and functionalize 2D materials through layer number, defects, morphology, moiré pattern, strain, and other control knobs. Through this review, we aim to highlight the most recent discoveries in the following topics: theory-guided synthesis for enhanced control of 2D morphologies, quality, yield, as well as insights toward novel 2D materials; defect engineering to control and understand the role of various defects, including in situ and ex situ methods; and properties and applications that are related to moiré engineering, strain engineering, and artificial intelligence. Finally, we also provide our perspective on the challenges and opportunities in this fascinating field.

All-optical switching of magnetization in atomically thin CrI3

Control of magnetism has attracted interest in achieving low-power and high-speed applications such as magnetic data storage and spintronic devices. Two-dimensional magnets allow for control of magnetic properties using the electric field, electrostatic doping and strain. In two-dimensional atomically thin magnets, a non-volatile all-optical method would offer the distinct advantage of switching magnetic states without application of an external field. Here, we demonstrate such all-optical magnetization switching in the atomically thin ferromagnetic semiconductor, CrI₃, triggered by circularly polarized light pulses. The magnetization switching behaviour strongly depends on the exciting photon energy and polarization, in correspondence with excitonic transitions in CrI₃, indicating that the switching process is related to spin angular momentum transfer from photoexcited carriers to local magnetic moments. Such an all-optical magnetization switching should allow for further exploration of magneto-optical interactions and open up applications in high-speed and low-power spintronic devices.

Dynamical criticality of spin-shear coupling in van der Waals antiferromagnets

The interplay between a multitude of electronic, spin, and lattice degrees of freedom underlies the complex phase diagrams of quantum materials. Layer stacking in van der Waals (vdW) heterostructures is responsible for exotic electronic and magnetic properties, which inspires stacking control of two-dimensional magnetism. Beyond the interplay between stacking order and interlayer magnetism, we discover a spin-shear coupling mechanism in which a subtle shear of the atomic layers can have a profound effect on the intralayer magnetic order in a family of vdW antiferromagnets. Using time-resolved X-ray diffraction and optical linear dichroism measurements, interlayer shear is identified as the primary structural degree of freedom that couples with magnetic order. The recovery times of both shear and magnetic order upon optical excitation diverge at the magnetic ordering temperature with the same critical exponent. The time-dependent Ginzburg-Landau theory shows that this concurrent critical slowing down arises from a linear coupling of the interlayer shear to the magnetic order, which is dictated by the broken mirror symmetry intrinsic to the monoclinic stacking. Our results highlight the importance of interlayer shear in ultrafast control of magnetic order via spin-mechanical coupling.

Van der Waals materials are characterized by two dimensional layers weakly held together by interlayer van der Waals forces. Here, the authors study how shear motions between these layers influence the magnetic properties of the van der Waals antiferromagnets FePS3, MnPS3, and NiPS3. ‘

Sliding nanomechanical resonators

The motion of a vibrating object is determined by the way it is held. This simple observation has long inspired string instrument makers to create new sounds by devising elegant string clamping mechanisms, whereby the distance between the clamping points is modulated as the string vibrates. At the nanoscale, the simplest way to emulate this principle would be to controllably make nanoresonators slide across their clamping points, which would effectively modulate their vibrating length. Here, we report measurements of flexural vibrations in nanomechanical resonators that reveal such a sliding motion. Surprisingly, the resonant frequency of vibrations draws a loop as a tuning gate voltage is cycled. This behavior indicates that sliding is accompanied by a delayed frequency response of the resonators, making their dynamics richer than that of resonators with fixed clamping points. Our work elucidates the dynamics of nanomechanical resonators with unconventional boundary conditions, and offers opportunities for studying friction at the nanoscale from resonant frequency measurements.

The motion of a vibrating object is set by the way it is held. Here, the authors show a nanomechanical resonator reversibly slides on its supporting substrate as it vibrates and exploit this unconventional dynamics to quantify friction at the nanoscale.

Nanomechanical Resonators: Toward Atomic Scale

The quest for realizing and manipulating ever smaller man-made movable structures and dynamical machines has spurred tremendous endeavors, led to important discoveries, and inspired researchers to venture to previously unexplored grounds. Scientific feats and technological milestones of miniaturization of mechanical structures have been widely accomplished by advances in machining and sculpturing ever shrinking features out of bulk materials such as silicon. With the flourishing multidisciplinary field of low-dimensional nanomaterials, including one-dimensional (1D) nanowires/nanotubes and two-dimensional (2D) atomic layers such as graphene/phosphorene, growing interests and sustained effort have been devoted to creating mechanical devices toward the ultimate limit of miniaturization─genuinely down to the molecular or even atomic scale. These ultrasmall movable structures, particularly nanomechanical resonators that exploit the vibratory motion in these 1D and 2D nano-to-atomic-scale structures, offer exceptional device-level attributes, such as ultralow mass, ultrawide frequency tuning range, broad dynamic range, and ultralow power consumption, thus holding strong promises for both fundamental studies and engineering applications. In this Review, we offer a comprehensive overview and summary of this vibrant field, present the state-of-the-art devices and evaluate their specifications and performance, outline important achievements, and postulate future directions for studying these miniscule yet intriguing molecular-scale machines.

All-optical control of spin in a 2D van der Waals magnet

Two-dimensional (2D) van der Waals magnets provide new opportunities for control of magnetism at the nanometre scale via mechanisms such as strain, voltage and the photovoltaic effect. Ultrafast laser pulses promise the fastest and most energy efficient means of manipulating electron spin and can be utilized for information storage. However, little is known about how laser pulses influence the spins in 2D magnets. Here we demonstrate laser-induced magnetic domain formation and all-optical switching in the recently discovered 2D van der Waals ferromagnet CrI₃. While the magnetism of bare CrI₃ layers can be manipulated with single laser pulses through thermal demagnetization processes, all-optical switching is achieved in nanostructures that combine ultrathin CrI₃ with a monolayer of WSe₂. The out-of-plane magnetization is switched with multiple femtosecond pulses of either circular or linear polarization, while single pulses result in less reproducible and partial switching. Our results imply that spin-dependent interfacial charge transfer between the WSe₂ and CrI₃ is the underpinning mechanism for the switching, paving the way towards ultrafast optical control of 2D van der Waals magnets for future photomagnetic recording and device technology.

The use of light in driving the magnetization of materials has great technological potential, as well as allowing for insights into the fast dynamics of magnetic systems. Here, the authors combine CrI₃, a van der Waals magnet, with WSe₂, and demonstrate all optical switching of the resulting heterostructure.

Coherent Phononics of van der Waals Layers on Nanogratings

Strain engineering can be used to control the physical properties of two-dimensional van der Waals (2D-vdW) crystals. Coherent phonons, which carry dynamical strain, could push strain engineering to control classical and quantum phenomena in the unexplored picosecond temporal and nanometer spatial regimes. This intriguing approach requires the use of coherent GHz and sub-THz 2D phonons. Here, we report on nanostructures that combine nanometer thick vdW layers and nanogratings. Using an ultrafast pump-probe technique, we generate and detect in-plane coherent phonons with frequency up to 40 GHz and hybrid flexural phonons with frequency up to 10 GHz. The latter arises from the periodic modulation of the elastic coupling of the vdW layer at the grooves and ridges of the nanograting. This creates a new type of a tailorable 2D periodic phononic nanoobject, a flexural phononic crystal, offering exciting prospects for the ultrafast manipulation of states in 2D materials in emerging quantum technologies.

Coherent helicity-dependent spin-phonon oscillations in the ferromagnetic van der Waals crystal CrI3

The discovery of two-dimensional systems hosting intrinsic magnetic order represents a seminal addition to the rich landscape of van der Waals materials. CrI₃ is an archetypal example, where the interdependence of structure and magnetism, along with strong light-matter interactions, provides a new platform to explore the optical control of magnetic and vibrational degrees of freedom at the nanoscale. However, the nature of magneto-structural coupling on its intrinsic ultrafast timescale remains a crucial open question. Here, we probe magnetic and vibrational dynamics in bulk CrI₃ using ultrafast optical spectroscopy, revealing spin-flip scattering-driven demagnetization and strong transient exchange-mediated interactions between lattice vibrations and spin oscillations. The latter yields a coherent spin-coupled phonon mode that is highly sensitive to the driving pulse's helicity in the magnetically ordered phase. Our results elucidate the nature of ultrafast spin-lattice coupling in CrI₃ and highlight its potential for applications requiring high-speed control of magnetism at the nanoscale.

The Magnetic Genome of Two-Dimensional van der Waals Materials

Magnetism in two-dimensional (2D) van der Waals (vdW) materials has recently emerged as one of the most promising areas in condensed matter research, with many exciting emerging properties and significant potential for applications ranging from topological magnonics to low-power spintronics, quantum computing, and optical communications. In the brief time after their discovery, 2D magnets have blossomed into a rich area for investigation, where fundamental concepts in magnetism are challenged by the behavior of spins that can develop at the single layer limit. However, much effort is still needed in multiple fronts before 2D magnets can be routinely used for practical implementations. In this comprehensive review, prominent authors with expertise in complementary fields of 2D magnetism (i.e., synthesis, device engineering, magneto-optics, imaging, transport, mechanics, spin excitations, and theory and simulations) have joined together to provide a genome of current knowledge and a guideline for future developments in 2D magnetic materials research.

Dynamics of Interfacial Bubble Controls Adhesion Mechanics in Van der Waals Heterostructure

Two-dimensional van der Waals heterostructures (vdWH) can result in novel functionality that crucially depends on interfacial structure and disorder. Bubbles at the vdWH interface can modify the interfacial structure. We probe the dynamics of a bubble at the interface of a graphene-hBN vdWH by using it as the drumhead of a NEMS device because nanomechanical devices are exquisite sensors. For drums with different interfacial bubbles, we measure the evolution of the resonant frequency and spatial mode shape as a function of electrostatic pulling. We show that the hysteretic detachment of layers of vdWH is triggered by the growth of large bubbles. The bubble growth takes place due to the concentration of stress resembling the initiation of fracture. The small bubbles at the heterostructure interface do not result in delamination as they are smaller than a critical fracture length. We provide insight into frictional dynamics and interfacial fracture of vdWH.

A monolithically sculpted van der Waals nano-opto-electro-mechanical coupler

The nano-opto-electro-mechanical systems (NOEMS) are a class of hybrid solid devices that hold promises in both classical and quantum manipulations of the interplay between one or more degrees of freedom in optical, electrical and mechanical modes. To date, studies of NOEMS using van der Waals (vdW) heterostructures are very limited, although vdW materials are known for emerging phenomena such as spin, valley, and topological physics. Here, we devise a universal method to easily and robustly fabricate vdW heterostructures into an architecture that hosts opto-electro-mechanical couplings in one single device. We demonstrated several functionalities, including nano-mechanical resonator, vacuum channel diodes, and ultrafast thermo-radiator, using monolithically sculpted graphene NOEMS as a platform. Optical readout of electric and magnetic field tuning of mechanical resonance in a CrOCl/graphene vdW NOEMS is further demonstrated. Our results suggest that the introduction of the vdW heterostructure into the NOEMS family will be of particular potential for the development of novel lab-on-a-chip systems.

Unconventional interlayer exchange coupling via chiral phonons in synthetic magnetic oxide heterostructures

Chiral symmetry breaking of phonons plays an essential role in emergent quantum phenomena owing to its strong coupling to spin degree of freedom. However, direct experimental evidence of the chiral phonon-spin coupling is lacking. In this study, we report a chiral phonon-mediated interlayer exchange interaction in atomically controlled ferromagnetic metal (SrRuO₃)-nonmagnetic insulator (SrTiO₃) heterostructures. Owing to the unconventional interlayer exchange interaction, we have observed rotation of spins as a function of nonmagnetic insulating spacer thickness, resulting in a spin spiral state. The chiral phonon-spin coupling is further confirmed by phonon Zeeman effect. The existence of the chiral phonons and their interplay with spins along with our atomic-scale heterostructure approach unveil the crucial roles of chiral phonons in magnetic materials.

Tunable Strong Coupling of Mechanical Resonance between Spatially Separated FePS3 Nanodrums

Coupled nanomechanical resonators made of two-dimensional materials are promising for processing information with mechanical modes. However, the challenge for these systems is to control the coupling. Here, we demonstrate strong coupling of motion between two suspended membranes of the magnetic 2D material FePS₃. We describe a tunable electromechanical mechanism for control over both the resonance frequency and the coupling strength using a gate voltage electrode under each membrane. We show that the coupling can be utilized for transferring data between drums by amplitude modulation. Finally, we also study the temperature dependence of the coupling and how it is affected by the antiferromagnetic phase transition characteristic of this material. The presented electrical coupling of resonant magnetic 2D membranes holds the promise of transferring mechanical energy over a distance at low electrical power, thus enabling novel data readout and information processing technologies.

2D Layered Material Alloys: Synthesis and Application in Electronic and Optoelectronic Devices

2D layered materials (2DLMs) have come under the limelight of scientific and engineering research and broke new ground across a broad range of disciplines in the past decade. Nevertheless, the members of stoichiometric 2DLMs are relatively limited. This renders them incompetent to fulfill the multitudinous scenarios across the breadth of electronic and optoelectronic applications since the characteristics exhibited by a specific material are relatively monotonous and limited. Inspiringly, alloying of 2DLMs can markedly broaden the 2D family through composition modulation and it has ushered a whole new research domain: 2DLM alloy nano-electronics and nano-optoelectronics. This review begins with a comprehensive survey on synthetic technologies for the production of 2DLM alloys, which include chemical vapor transport, chemical vapor deposition, pulsed-laser deposition, and molecular beam epitaxy, spanning their development, as well as, advantages and disadvantages. Then, the up-to-date advances of 2DLM alloys in electronic devices are summarized. Subsequently, the up-to-date advances of 2DLM alloys in optoelectronic devices are summarized. In the end, the ongoing challenges of this emerging field are highlighted and the future opportunities are envisioned, which aim to navigate the coming exploration and fully exert the pivotal role of 2DLMs toward the next generation of electronic and optoelectronic devices.

Regulation of stem cell fate using nanostructure-mediated physical signals

One of the major issues in tissue engineering is regulation of stem cell differentiation toward specific lineages. Unlike biological and chemical signals, physical signals with adjustable properties can be applied to stem cells in a timely and localized manner, thus making them a hot topic for research in the fields of biomaterials, tissue engineering, and cell biology. According to the signals sensed by cells, physical signals used for regulating stem cell fate can be classified into six categories: mechanical, light, thermal, electrical, acoustic, and magnetic. In most cases, external macroscopic physical fields cannot be used to modulate stem cell fate, as only the localized physical signals accepted by the surface receptors can regulate stem cell differentiation via nanoscale fibrin polysaccharide fibers. However, surface receptors related to certain kinds of physical signals are still unknown. Recently, significant progress has been made in the development of functional materials for energy conversion. Consequently, localized physical fields can be produced by absorbing energy from an external physical field and subsequently releasing another type of localized energy through functional nanostructures. Based on the above concepts, we propose a methodology that can be utilized for stem cell engineering and for the regulation of stem cell fate via nanostructure-mediated physical signals. In this review, the combined effect of various approaches and mechanisms of physical signals provides a perspective on stem cell fate promotion by nanostructure-mediated physical signals. We expect that this review will aid the development of remote-controlled and wireless platforms to physically guide stem cell differentiation both in vitro and in vivo, using optimized stimulation parameters and mechanistic investigations while driving the progress of research in the fields of materials science, cell biology, and clinical research.

Graphene-Based Nanoelectromechanical Periodic Array with Tunable Frequency

Phononic crystals (PnCs) have attracted much attention due to their great potential for dissipation engineering and propagation manipulation of phonons. Notably, the excellent electrical and mechanical properties of graphene make it a promising material for nanoelectromechanical resonators. Transferring a graphene flake to a prepatterned periodic mechanical structure enables the realization of a PnC with on-chip scale. Here, we demonstrate a nanoelectromechanical periodic array by anchoring a graphene membrane to a 9 × 9 array of standing nanopillars. The device exhibits a quasi-continuous frequency spectrum with resonance modes distributed from ∼120 MHz to ∼980 MHz. Moreover, the resonant frequencies of these modes can be electrically tuned by varying the voltage applied to the gate electrode sitting underneath. Simulations suggest that the observed band-like spectrum provides an experimental evidence for PnC formation. Our architecture has large fabrication flexibility, offering a promising platform for investigations on PnCs with electrical accessibility and tunability.

Dissipation from Interlayer Friction in Graphene Nanoelectromechanical Resonators

A unique feature of two-dimensional (2D) materials is the ultralow friction at their van der Waals interfaces. A key question in a new generation of 2D heterostructure-based nanoelectromechanical systems (NEMS) is how the low friction interfaces will affect the dynamic performance. Here, we apply the exquisite sensitivity of graphene nanoelectromechanical drumhead resonators to compare the dissipation from monolayer, Bernal-stacked bilayer, and twisted bilayer graphene membranes. We find a significant difference in the average quality factors of three resonator types: 53 for monolayer, 40 for twisted and 31 for Bernal-stacked membranes. We model this difference as a combination of change in stiffness and additional dissipation from interlayer friction during motion. We find even the lowest frictions measured on sliding 2D interfaces are sufficient to alter dissipation in 2D NEMS. This model provides a generalized approach to quantify dissipation in NEMS based on 2D heterostructures which incorporate interlayer slip and friction.

Overcoming the asymmetry of the electron and hole doping for magnetic transitions in bilayer CrI3

Electrical control of magnetism has great potential for low-power spintronics applications and the newly discovered two-dimensional van der Waals magnetic materials are promising systems for this type of applications. In fact, it has been recently shown experimentally (Jiang et al., Nat. Nanotechnol., 2018, 13, 549-553) that upon electrostatic doping by electrons bilayer CrI3 undergoes an antiferromagnetic-ferromagnetic (AFM-FM) phase transition, even in the absence of magnetic field. Doping by holes, on the other hand, does not induce the same transition in the experiment, which points to an intrinsic asymmetry in the hole and electron doping that limits the control of the transition by doping. We here show, based on first-principles calculations, that the asymmetry originates in the relativistic nature of the valence-band-edge states of the pristine bilayer, which inhibits the magnetic transition upon hole doping. Based on this finding, we propose an approach to overcome the asymmetry and predict the existence of the AFM-FM transition for both hole and electron doping upon moderate uniaxial compression along the soft direction of the bilayer.

Multifunctional antiferromagnetic materials with giant piezomagnetism and noncollinear spin current

We propose a new type of spin-valley locking (SVL), named C-paired SVL, in antiferromagnetic systems, which directly connects the spin/valley space with the real space, and hence enables both static and dynamical controls of spin and valley to realize a multifunctional antiferromagnetic material. The new emergent quantum degree of freedom in the C-paired SVL is comprised of spin-polarized valleys related by a crystal symmetry instead of the time-reversal symmetry. Thus, both spin and valley can be accessed by simply breaking the corresponding crystal symmetry. Typically, one can use a strain field to induce a large net valley polarization/magnetization and use a charge current to generate a large noncollinear spin current. We predict the realization of the C-paired SVL in monolayer V2Se2O, which indeed exhibits giant piezomagnetism and can generate a large transverse spin current. Our findings provide unprecedented opportunities to integrate various controls of spin and valley with nonvolatile information storage in a single material, which is highly desirable for versatile fundamental research and device applications.

Layer-Dependent Mechanical Properties and Enhanced Plasticity in the Van der Waals Chromium Trihalide Magnets

The mechanical properties of magnetic materials are instrumental for the development of magnetoelastic theories and the optimization of strain-modulated magnetic devices. In particular, two-dimensional (2D) magnets hold promise to enlarge these concepts into the realm of low-dimensional physics and ultrathin devices. However, no experimental study on the intrinsic mechanical properties of the archetypal 2D magnet family of the chromium trihalides has thus far been performed. Here, we report the room temperature layer-dependent mechanical properties of atomically thin CrCl₃ and CrI₃, finding that the bilayers have Young's moduli of 62.1 and 43.4 GPa, highest sustained strains of 6.49% and 6.09% and breaking strengths of 3.6 and 2.2 GPa, respectively. This portrays the outstanding plasticity of these materials that is qualitatively demonstrated in the bulk crystals. The current study will contribute to the applications of the 2D magnets in magnetostrictive and flexible devices.

Tunable Exciton-Optomechanical Coupling in Suspended Monolayer MoSe2

The strong excitonic effect in monolayer transition metal dichalcogenide (TMD) semiconductors has enabled many fascinating light-matter interaction phenomena. Examples include strongly coupled exciton-polaritons and nearly perfect atomic monolayer mirrors. The strong light-matter interaction also opens the door for dynamical control of mechanical motion through the exciton resonance of monolayer TMDs. Here, we report the observation of exciton-optomechanical coupling in a suspended monolayer MoSe₂ mechanical resonator. By moderate optical pumping near the MoSe₂ exciton resonance, we have observed optical damping and antidamping of mechanical vibrations as well as the optical spring effect. The exciton-optomechanical coupling strength is also gate-tunable. Our observations can be understood in a model based on photothermal backaction and gate-induced mirror symmetry breaking in the device structure. The observation of gate-tunable exciton-optomechanical coupling in a monolayer semiconductor may find applications in nanoelectromechanical systems (NEMS) and in exciton-optomechanics.

Polymorphism in Post-Dichalcogenide Two-Dimensional Materials

Two-dimensional (2D) materials exhibit a wide range of atomic structures, compositions, and associated versatility of properties. Furthermore, for a given composition, a variety of different crystal structures (i.e., polymorphs) can be observed. Polymorphism in 2D materials presents a fertile landscape for designing novel architectures and imparting new functionalities. The objective of this Review is to identify the polymorphs of emerging 2D materials, describe their polymorph-dependent properties, and outline methods used for polymorph control. Since traditional 2D materials (e.g., graphene, hexagonal boron nitride, and transition metal dichalcogenides) have already been studied extensively, the focus here is on polymorphism in post-dichalcogenide 2D materials including group III, IV, and V elemental 2D materials, layered group III, IV, and V metal chalcogenides, and 2D transition metal halides. In addition to providing a comprehensive survey of recent experimental and theoretical literature, this Review identifies the most promising opportunities for future research including how 2D polymorph engineering can provide a pathway to materials by design.

Dynamically-enhanced strain in atomically thin resonators

Graphene and related two-dimensional (2D) materials associate remarkable mechanical, electronic, optical and phononic properties. As such, 2D materials are promising for hybrid systems that couple their elementary excitations (excitons, phonons) to their macroscopic mechanical modes. These built-in systems may yield enhanced strain-mediated coupling compared to bulkier architectures, e.g., comprising a single quantum emitter coupled to a nano-mechanical resonator. Here, using micro-Raman spectroscopy on pristine monolayer graphene drums, we demonstrate that the macroscopic flexural vibrations of graphene induce dynamical optical phonon softening. This softening is an unambiguous fingerprint of dynamically-induced tensile strain that reaches values up to ≈4 × 10⁻⁴ under strong non-linear driving. Such non-linearly enhanced strain exceeds the values predicted for harmonic vibrations with the same root mean square (RMS) amplitude by more than one order of magnitude. Our work holds promise for dynamical strain engineering and dynamical strain-mediated control of light-matter interactions in 2D materials and related heterostructures.

Here, the authors use Raman spectroscopy on circular graphene drums to demonstrate dynamical softening of optical phonons induced by the macroscopic flexural motion of graphene, and find evidence that the strain in graphene is enhanced under non-linear driving.

Observation of site-controlled localized charged excitons in CrI3/WSe2 heterostructures

Isolated spins are the focus of intense scientific exploration due to their potential role as qubits for quantum information science. Optical access to single spins, demonstrated in III-V semiconducting quantum dots, has fueled research aimed at realizing quantum networks. More recently, quantum emitters in atomically thin materials such as tungsten diselenide have been demonstrated to host optically addressable single spins by means of electrostatic doping the localized excitons. Electrostatic doping is not the only route to charging localized quantum emitters and another path forward is through band structure engineering using van der Waals heterojunctions. Critical to this second approach is to interface tungsten diselenide with other van der Waals materials with relative band-alignments conducive to the phenomenon of charge transfer. In this work we show that the Type-II band-alignment between tungsten diselenide and chromium triiodide can be exploited to excite localized charged excitons in tungsten diselenide. Leveraging spin-dependent charge transfer in the device, we demonstrate spin selectivity in the preparation of the spin-valley state of localized single holes. Combined with the use of strain-inducing nanopillars to coordinate the spatial location of tungsten diselenide quantum emitters, we uncover the possibility of realizing large-scale deterministic arrays of optically addressable spin-valley holes in a solid state platform.