Water-soluble Polypyrrole-Polybis(4-oxy benzene sulfonic acid)phosphazene Composites and Investigation of Their Performance as Cathode Binder in Li-ion Batteries

Current electric storage systems eagerly focus on high-power and energy-dense Lithium-ion batteries to cope with increasing energy storage demands. Since cathode materials are one of the bottlenecks of these batteries, there is much interest in layered lithium-rich manganese oxide-based (LLMO) cathodes which can develop this technology. However, Initial Coulombic Efficiency (ICE) loss, poor rate performance and cycling instability issues are still persistent as problems to be solved for these materials. Recent research shows that water-soluble binders are effective in improving the performance of LLMO materials. Herein, we describe the synthesis, characterisation, and application of a series of water-soluble composites as a binder for LLMO cathodes. The PPy is introduced as part of the binder to improve the electronic conductivity and two different oxidants and various PPy to PSAP ratios were used to optimise the final properties. The electrochemical performance and morphology of the cathodes before and after cycling were investigated and compared with the conventional PVDF binder. The LLMO-2c electrode showed excellent charge-discharge performance, especially at 5 C and 10 C rates, and high cycling stability at 0.2 C whilst maintaining a final capacity of 184 mAh/g after 200 cycles, which is equal to 89.3 % capacity retention.

Access to 2,4-Disubstituted Pyrrole-Based Polymer with Long-Wavelength and Stimuli-Responsive Properties via Copper-Catalyzed [3+2] Polycycloaddition

Pyrrole-based polymers (PBPs), a type of fascinating functional polymers, play a crucial role in materials science. However, efficient synthetic strategies of PBPs with diverse structures are mainly focused on conjugated polypyrroles and still remain challenging. Herein, an atom and step economy protocol is described to access various 2,4-disubstituted PBPs by in situ formation of pyrrole core structure via copper-catalyzed [3+2] polycycloaddition of dialkynones and diisocyanoacetates. A series of PBPs is prepared with high molecular weight (Mw up to 18 200 Da) and moderate to good yield (up to 87%), which possesses a fluorescent emission located in the green to yellow light region. Blending the PBPs with polyvinyl alcohol, the stretchable composite films exhibit a significant strengthening of the mechanical properties (tensile stress up to 59 MPa, elongation at break >400%) and an unprecedented stress-responsive luminescence enhancement that over fourfold fluorescent emission intensity is maintained upon stretching up to 100%. On the basis of computational studies, the unique photophysical and mechanical properties are attributed to the substitution of carbonyl chromophores on the pyrrole unit.

The frontier of tungsten oxide nanostructures in electronic applications

Electrochromic (EC) glazing has garnered significant attention recently as a crucial solution for enhancing energy efficiency in future construction and automotive sectors. EC glazing could significantly reduce the energy usage of buildings compared to traditional blinds and glazing. Despite their commercial availability, several challenges remain, including issues with switching time, leakage of electrolytes, production costs, etc. Consequently, these areas demand more attention and further studies. Among inorganic-based EC materials, tungsten oxide nanostructures are essential due to its outstanding advantages such as low voltage demand, high coloration coefficient, large optical modulation range, and stability. This review will summarize the principal design and mechanism of EC device fabrication. It will highlight the current gaps in understanding the mechanism of EC theory, discuss the progress in material development for EC glazing, including various solutions for improving EC materials, and finally, introduce the latest advancements in photo-EC devices that integrate photovoltaic and EC technologies.

Employing polyaniline/viologen complementarity to enhance coloration and charge dissipation in multicolor electrochromic display with wide modulation range

Multicolor electrochromic devices have gained attention widely. To support the development of multicolor electrochromic devices, we studied complementary combinations of a multicolor switchable polyaniline (PANI) electrode and 1-methyl-4,4'-bipyridyl iodide (MBI). In particular, MBI acting as an electrolyte and cathodic electrochromic layer can not only simplify the architecture of a device, but also support the color richness of the device simultaneously. Wide band optical modulation in visible light (58.1% at 550 nm) and near-infrared light (35% at 800 nm) confirms the advantageous optical properties of the combination, possessing a wide color gamut range over a range of working voltages adjustable for red, yellow, green, blue, and purple, each having a high color contrast of up to 73.8. This is accompanied by the excellent electrochemical performances of the mentioned combination, such as a fast response time of 1 s/1.9 s (modulating 77%-colored/bleached) with good cycle stability, and high coloration efficiency of 140.63 cm2/C. In addition, utilizing a screen-printed polyvinyl alcohol (PVA) as a masking barrier layer, it is possible to display patterned anti-counterfeit information within the application. Given these electrochromic performance properties, it is considered a readily feasible strategy to utilize PANI and MBI combination to develop novel electrochromic devices, which can be used widely in the areas of smart packaging, smart labels, and flexible smart windows associated with specific application scenarios.

Novel Capturer-Catalyst Microreactor System with a Polypyrrole/Metal Nanoparticle Composite Incorporated in the Porous Honeycomb-Patterned Film

A composite of polypyrrole/metal nanoparticles (PPy/MNPs) was selectively incorporated into the pores of a honeycomb-patterned porous polycaprolactone polymer film to fabricate a novel capturer-catalyst microreactor system. This fabrication involved a modified breath figure method, where the polymer solution containing metal ions as an oxidizing agent was cast under humid conditions along with the pyrrole monomer through an interfacial reaction in a one-step in situ process. The higher hydrophilicity of the metal ions compared to the polymer solution led to their self-assembly around the pore surface, resulting in the selective incorporation of the PPy/MNP composite into the porous film. Copper (Cu), silver (Ag), and gold (Au) were used for the PPy/MNP fabrication. Various methods characterized the fabricated film. Strong catalytic degradations of methylene blue and methyl orange were obtained with PCL-PPy/MNPs. Recycling experiments showed no loss of activity even after five cycles of recycling. Comparative analysis of PCL-PPy, PCL-MNP, and PCL-PPy/MNP results indicated the synergistic action of PPy and MNPs in dye degradation. High-performance liquid chromatography and mass spectroscopy analyses confirmed dye degradation after treatment with a fabricated microreactor. PPy might have acted as a capturer of the dye molecule and MNPs as a catalyst, thereby enhancing the efficiency of dye degradation. Additionally, the PCL-PPy/Cu composite exhibited strong antimicrobial properties against Gram-positive (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli) with no cytotoxicity as measured by the MTT assay. Therefore, the fabricated microreactor film has promising applications in various fields.

Efficient full solar spectrum-driven photocatalytic hydrogen production on low bandgap TiO2/conjugated polymer nanostructures

The development of photocatalysts that can utilize the entire solar spectrum is crucial to achieving efficient solar energy conversion. The utility of the benchmark photocatalyst, TiO2, is limited only to the UV region due to its large bandgap. Extending the light harvesting properties across the entire spectrum is paramount to enhancing solar photocatalytic performance. In this work, we developed low bandgap TiO2/conjugated polymer nanostructures which exhibit full spectrum activity for efficient H2 production. The highly mesoporous structure of the nanostructures together with the photosensitizing properties of the conjugated polymer enabled efficient solar light activity. The mesoporous TiO2 nanostructures calcined at 550 °C exhibited a defect-free anatase crystalline phase with traces of brookite and high surface area, resulting in the best performance in hydrogen production (5.34 mmol g-1 h-1) under sunlight simulation. This value is higher not only in comparison to other TiO2-based catalysts but also to other semiconductor materials reported in the literature. Thus, this work provides an effective strategy for the construction of full spectrum active nanostructured catalysts for enhanced solar photocatalytic hydrogen production.

A holistic review on the recent trends, advances, and challenges for high-precision room temperature liquefied petroleum gas sensors

Liquefied petroleum gas (LPG), which is mainly composed of hydrocarbons, such as propane and butane, is a flammable gas that is considered a clean source of energy. Currently, the overwhelming use of LPG as fuel in vehicles, domestic settings, and industry has led to several incidents and deaths globally due to leakage. As a result, the appropriate detection of LPG is vital; thus, gas-sensing devices that can monitor this gas rapidly and accurately at room temperature, are required. This work reviews the current advances in LPG gas sensors, which operate at room temperature. The influences of the synthesis methods and parameters, doping, and use of catalysts on the sensing performance are discussed. The formation of heterostructures made from semiconducting metal oxides, polymers, and graphene-based materials, which enhance the sensor selectivity and sensitivity, is also discussed. The future trends and challenges confronted in the advancement of LPG room temperature operational gas sensors, and critical ideas concerning the future evolution of LPG gas sensors, are deliberated. Additionally, the advancements in the next-generation gas sensors, such as the wireless detection of LPG leakage, self-powered sensors driven by triboelectric/piezoelectric mechanisms, and artificial intelligent systems are also reviewed. This review further focuses on the use of smartphones to circumvent the use of costly instruments and paves the way for cost-efficient and portable monitoring of LPG. Finally, the approach of utilizing the Internet of Things (IoT) to detect/monitor the leakage of LPG has also been discussed, which will provide better alerts to the users and thus minimize the effects of leakages.

Screen Printed Reflective Electrochromic Displays for Paper and Other Opaque Substrates

Paper electronics is a viable alternative to traditional electronics, leading to more sustainable electronics. Many challenges still require solutions before paper electronics become mainstream. Here, we present a solution to enable the manufacturing of reflective all-printed organic electrochromic displays (OECDs) on paper substrates; devices that are usually printed on transparent substrates, for example, plastics. In order to operate on opaque paper substrates, an architecture for reversely printed OECDs (rOECDs) is developed. In this architecture, the electrochromic layer is printed as the last functional layer and can therefore be viewed from the print side. Square shaped 1 cm² rOECDs are successfully screen printed on paper, with a high manufacturing yield exceeding 99%, switching times <3 s and high color contrast (ΔE* > 27). Approximately 60% of the color is retained after 15 min in open-circuit mode. Compared to the conventional screen printed OECD architectures, the rOECDs recover approximately three times faster from storage in a dry environment, which is particularly important in systems where storage in low humidity atmosphere is required, for example, in many biosensing applications. Finally, a more complex rOECD with 9 individually addressable segments is successfully screen printed and demonstrated.

In-Situ Spectro-Electrochemistry of Conductive Polymers Using Plasmonics to Reveal Doping Mechanisms

Conducting polymers are a key component for developing wearable organic electronics, but tracking their redox processes at the nanoscale to understand their doping mechanism remains challenging. Here we present an in-situ spectro-electrochemical technique to observe redox dynamics of conductive polymers in an extremely localized volume (<100 nm³). Plasmonic nanoparticles encapsulated by thin shells of different conductive polymers provide actively tuned scattering color through switching their refractive index. Surface-enhanced Raman scattering in combination with cyclic voltammetry enables detailed studies of the redox/doping process. Our data intriguingly show that the doping mechanism varies with polymer conductivity: a disproportionation mechanism dominates in more conductive polymers, while sequential electron transfer prevails in less conductive polymers.

Applications of MXene-Containing Polypyrrole Nanocomposites in Electrochemical Energy Storage and Conversion

The atomically thick two-dimensional (2D) materials are at the forefront of revolutionary technologies for energy storage devices. Due to their fascinating physical and chemical features, these materials have gotten a lot of attention. They are particularly appealing for a wide range of applications, including electrochemical storage systems, due to their simplicity of property tuning. The MXene is a type of 2D material that is widely recognized for its exceptional electrochemical characteristics. The use of these materials in conjunction with conducting polymers, notably polypyrrole (PPy), has opened new possibilities for lightweight, flexible, and portable electrodes. Therefore, herein we report a comprehensive review of recent achievements in the production of MXene/PPy nanocomposites. The structural-property relationship of this class of nanocomposites was taken into consideration with an elaborate discussion of the various characterizations employed. As a result, this research gives a narrative explanation of how PPy interacts with distinct MXenes to produce desirable high-performance nanocomposites. The effects of MXene incorporation on the thermal, electrical, and electrochemical characteristics of the resultant nanocomposites were discussed. Finally, it is critically reviewed and presented as an advanced composite material in electrochemical storage devices, energy conversion, electrochemical sensors, and electromagnetic interference shielding.

Flexible electrochromic devices having remarkable color change from golden to green and their application in smart windows and electronic labels

The ECDs based on viologen derivatives exhibit high optical contrast, fast-response, and rich color changes.

Graphene Loading with Polypyrrole Nanoparticles for Trace-Level Detection of Ammonia at Room Temperature

The outstanding versatility of graphene for surface functionalization has been exploited by its decoration with synthesized polypyrrole (PPy) nanoparticles (NPs). A green, facile, and easily scalable for mass production nanocomposite development was proposed, and the resulting PPy@Graphene was implemented in chemoresistive gas sensors able to detect trace levels of ammonia (NH₃) under room-temperature conditions. Gas exposure for 5 min revealed that the presence of nanoparticles decorating graphene entail greater sensitivity (13-fold) in comparison to the bare graphene performance. Noteworthy, excellent repeatability (0.7% of relative error) and a low limit of detection of 491 ppb were obtained, together with excellent long-term stability. Besides, an extensive material characterization was conducted, and vibration bands obtained via Raman spectroscopy confirmed the formation of PPy NPs, while X-ray spectroscopy (XPS) revealed the relative abundance of the different species, as polarons and bipolarons. Additionally, XPS analyses were conducted before and after NH₃ exposure to assess the PPy aging and the changes induced in their physicochemical and electronic properties. Specifically, the gas sensor was tested during a 5-month period, demonstrating significant stability over time, since just a slight decrease (11%) in the responses was registered. In summary, the present work reports for the first time the use of PPy NPs decorating graphene for gas-sensing purposes, revealing promising properties for the development of unattended gas-sensing networks for monitoring air quality.

Pyrrole-Embedded Linear and Helical Graphene Nanoribbons

Linear and helical graphene nanoribbons (L-PyGNR and H-PyGNR) bearing electron-rich pyrrole units have been synthesized by using the photochemical cyclodehydrochlorination (CDHC) reaction. The pyrrole units in the polymer backbone make the polymer electron-rich with moderate bandgap values and relatively high HOMO energy levels. The planarization of the pyrrole unit through cyclization yields a bandgap value almost 0.5 eV lower than that measured for polypyrrole. Conductivity values in the thin film up to 0.12 S/cm were measured for the chemically oxidized L-PyGNR (four-point method). Both GNRs showed excellent fluorescence sensing properties for TNT in solution with K_SV values up to 6.4 × 10⁶ M^-1.

E-Tongues/Noses Based on Conducting Polymers and Composite Materials: Expanding the Possibilities in Complex Analytical Sensing

Conducting polymers (CPs) are extensively studied due to their high versatility and electrical properties, as well as their high environmental stability. Based on the above, their applications as electronic devices are promoted and constitute an interesting matter of research. This review summarizes their application in common electronic devices and their implementation in electronic tongues and noses systems (E-tongues and E-noses, respectively). The monitoring of diverse factors with these devices by multivariate calibration methods for different applications is also included. Lastly, a critical discussion about the enclosed analytical potential of several conducting polymer-based devices in electronic systems reported in literature will be offered.

Electrosynthesis of Electrochromic Polymer Membranes Based on 3,6-Di(2-thienyl)carbazole and Thiophene Derivatives

Five carbazole-containing polymeric membranes (PDTC, P(DTC-co-BTP), P(DTC-co-BTP2), P(DTC-co-TF), and P(DTC-co-TF2)) were electrodeposited on transparent conductive electrodes. P(DTC-co-BTP2) shows a high ΔT (68.4%) at 855 nm. The multichromic properties of P(DTC-co-TF2) membrane range between dark yellow, yellowish-green, gunmetal gray, and dark gray in various reduced and oxidized states. Polymer-based organic electrochromic devices are assembled using 2,2'-bithiophene- and 2-(2-thienyl)furan-based copolymers as anodic membranes, and poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) (PEDOT-PSS) as the cathodic membrane. P(DTC-co-TF)/PEDOT-PSS electrochromic device (ECD) displays a high transmittance change (ΔT%) (43.4%) at 627 nm as well as a rapid switching time (less than 0.6 s) from a colored to a bleached state. Moreover, P(DTC-co-TF2)/PEDOT-PSS ECD shows satisfactory optical memory (the transmittance change is less than 2.9% in the colored state) and high coloration efficiency (512.6 cm2 C-1) at 627 nm.

Electrochemically Produced Copolymers of Pyrrole and Its Derivatives: A Plentitude of Material Properties Using "Simple" Heterocyclic Co-Monomers

Polypyrrole is a classical, well-known conjugated polymer that is produced from a simple heterocyclic system. Numerous pyrrole derivatives exhibit biological activity, and the repeat unit is a common building block present in the chemical structure of many polymeric materials, finding wide application, primarily in optoelectronics and sensing. In this work, we focus on the variety of copolymers and their material properties that can be produced electrochemically, even though all these systems are obtained from mixtures of the "simple" pyrrole monomer and its derivatives with different conjugated and non-conjugated species.

4-(Trifluoromethoxy)phenyl-Containing Polymers as Promising Anodic Materials for Electrochromic Devices

Three 4-(trifluoromethoxy)phenyl-based polydithienylpyrroles (PTTPP, P(TTPP-co-DTC), and P(TTPP-co-DTP)) were synthesized electrochemically and their electrochromic behaviors were characterized. The introduction of electron withdrawing trifluoromethoxy unit in the side chain of polydithienylpyrroles (PSNS) decreases the HOMO and LUMO energy levels of PSNS. PTTPP film displays three various colors (grayish-yellow at 0 V, grayish-blue at 1.0 V, and bluish-violet at 1.4 V) from reduced to oxidized states. The optical contrast of PTTPP, P(TTPP-co-DTC), and P(TTPP-co-DTP) electrodes are 24.5% at 1050 nm, 49.0% at 916 nm, and 53.8% at 1302 nm, respectively. The highest η of the PTTPP electrode is 379.64 cm2 C−1 at 1050 nm. Three ECDs based on PTTPP, P(TTPP-co-DTC), or P(TTPP-co-DTP) as anodic film and PProDOT-Et2 as cathodic film were fabricated. PTTPP/PProDOT-Et2 ECD showed high transmittance change (35.7% at 588 nm) and high η (890.96 cm2·C−1 at 588 nm). P(TTPP-co-DTC)/PProDOT-Et2 and P(TTPP-co-DTP)/PProDOT-Et2 ECDs showed high transmittance change, rapid response time, adequate open circuit memory, and good electrochemical redox stability. Based on these findings, this work provides novel insights for appropriate design of high transmittance change and high efficient multi-colored electrochromic polymers.

Flexible/Stretchable Supercapacitors with Novel Functionality for Wearable Electronics

With the miniaturization of personal wearable electronics, considerable effort has been expended to develop high-performance flexible/stretchable energy storage devices for powering integrated active devices. Supercapacitors can fulfill this role owing to their simple structures, high power density, and cyclic stability. Moreover, a high electrochemical performance can be achieved with flexible/stretchable supercapacitors, whose applications can be expanded through the introduction of additional novel functionalities. Here, recent advances in and future prospects for flexible/stretchable supercapacitors with innate functionalities are covered, including biodegradability, self-healing, shape memory, energy harvesting, and electrochromic and temperature tolerance, which can contribute to reducing e-waste, ensuring device integrity and performance, enabling device self-charging following exposure to surrounding stimuli, displaying the charge status, and maintaining the performance under a wide range of temperatures. Finally, the challenges and perspectives of high-performance all-in-one wearable systems with integrated functional supercapacitors for future practical application are discussed.

Electrosynthesis and Electrochromism of a New Crosslinked Polydithienylpyrrole with Diphenylpyrenylamine Subunits

A new electroactive monomer with two 2,5-di(2-thienyl)pyrrole (SNS) units and one diphenylpyrenylamine (DPPA) subunit, namely N,N-bis(4-(2,5-di(2-thienyl)-1H-pyrrol-1-yl)-phenyl)-1-aminopyrene (DPPA-2SNS), was synthesized from 1,4-di-(2-thienyl)butane-1,4-dione with N,N-di(4-aminophenyl)-1-aminopyrene through the Paal–Knorr condensation reaction. Visible and near-infrared (NIR) electrochromic polymer films could be facilely generated on the ITO-glass surface by the electrochemical polymerization of DPPA-2SNS in an electrolyte solution. The electro-synthesized polymer films exhibit multi-staged redox processes and multi-colored anodic electrochromic behavior. A multi-colored electrochromism, with yellowish orange, greyish blue, and purplish black colors, was observed in the polymer film by applying a positive potential. The polymer films exhibit reasonable coloration efficiency, fast response time, and good cycling stability, especially when switched between neutral and the first oxidation states. For comparison, N-(1-pyrenyl)-2,5-di(2-thienyl)pyrrole (Py-SNS) was also prepared and characterized with electrochemical and electro-optical properties.

Iterative Suzuki-Miyaura Cross-coupling/Bromo-desilylation Reaction Sequences for the Assembly of Chemically Well-defined, Acyclic Oligopyrrole/Benzenoid Hybrids Embodying Mixed Modes of Connectivity

Syntheses of a range of chemically well-defined oligopyrrole/benzenoid hybrids are described using tandem Suzuki-Miyaura cross-coupling/bromo-desilyation reaction sequences for linking borylated pyrroles, halogenated pyrroles and/or dibromobenzenes to one another. By such means, including iterative variants, a range of all α-linked, all β-linked oligopyrroles as well as certain combinations thereof have been assembled, some of them for the first time. The conductivities of iodine-treated thin films formed from certain such systems have been determined.

Synthesis, Follow-Up, and Characterization of Polydopamine-like Coatings Departing from Micromolar Dopamine-o-Quinone Precursor Concentrations

The understanding of oxidized species derived from the neurotransmitter dopamine (DA) is a relevant topic for both the medical field (Parkinson's disease) as well as for the field of materials science where the formation process of polydopamine (PDA) films is an active area of research. Polymers that interact strongly with almost all surfaces but have a low electrical conductivity have been obtained by the chemical oxidation of DA. Since electrical conductivity is a desired property for several applications, deposition alternatives such as electrochemical PDA synthesis have been proposed, but the results are still insufficient. In this context, we propose a new PDA chemical-electrochemical deposition process on glassy carbon electrodes. The chemical oxidation step that converts dopamine into dopamine-o-quinone previous to the electrochemical deposition was crucial to decrease the precursor concentration to the micromolar range. The PDA-like films synthesized by this method had high adhesion and low charge-transfer resistance, which was evidenced by impedance measurements and the successful electrodeposition of a polypyrrole coating on top of a PDA-like film. In addition, we observed that anodization of GC surfaces increases sensitivity toward six electroactive couples derived from DA oxidation in the pH regimes studied. These results show the complexity of the intermediates formed during the electrochemical polymerization of PDA.

Ruthenium Decorated Polypyrrole Nanoparticles for Highly Sensitive Hydrogen Gas Sensors Using Component Ratio and Protonation Control

Despite being highly flammable at lower concentrations and causing suffocation at higher concentrations, hydrogen gas continues to play an important role in various industrial processes. Therefore, an appropriate monitoring system is crucial for processes that use hydrogen. In this study, we found a nanocomposite comprising of ruthenium nanoclusters decorated on carboxyl polypyrrole nanoparticles (Ru_CPPy) to be successful in detecting hydrogen gas through a simple sonochemistry method. We found that the morphology and density control of the ruthenium component increased the active surface area to the target analyte (hydrogen molecule). Carboxyl polypyrrole (CPPy) in the nanocomposite was protonated to increase the charge transfer rate during gas detection. This material-based sensor electrode was highly sensitive (down to 0.5 ppm) toward hydrogen gas and had a fast response and recovery time under ambient conditions. The sensing ability of the electrode was maintained up to 15 days without structure deformations.

Tracking Dynamic Doping in a Solid-State Electrochromic Device: Raman Microscopy Validates the Switching Mechanism

Solid-state electrochromic devices often need appropriate characterization to establish the real working mechanism for optimization and diagnosis. Raman mapping has been used here to track "dynamic doping", an important concept in organic electronics and in polythiophene-based solid-state electrochromic devices to understand and validate the mechanism of bias-induced redox-driven color switching. The proposed method demonstrates the live formation and movement of polarons which is best suited for in situ solid-state Raman spectroelectrochemistry. A 2-fold approach has been adopted here for this (1) by fabricating a working device in cross bar geometry followed by in situ spectroscopy to demonstrate the device functioning and (2) by carrying out Raman mapping from a device in custom-designed thin-film-transistor-like geometry to track and actually "see" the mechanism spectroscopically.

Dithienylpyrrole Electrografting on a Surface through the Electroreduction of Diazonium Salts

The control of the interface and the adhesion process are key issues for the development of new application based on electrochromic materials. In this work the functionalization of an electrode’s surface through electroreduction of diazonium generated in situ from 4-(2,5-di-thiophen-2-yl-pyrrol-1-yl)-phenylamine (SNS-An) has been proposed. The synthesis of the aniline derivative SNS-An was performed and the electrografting was investigated by cyclic voltammetry on various electrodes. Then the organic thin film was fully characterized by several techniques and XPS analysis confirms the presence of an organic film based on the chemical composition of the starting monomer and allows an estimation of its thickness confirmed by AFM scratching measurements. Depending on the number of electrodeposition cycles, the thickness varies from 2 nm to 10 nm, which corresponds to a few grafted oligomers. In addition, the grafted film showed a good electrochemical stability depending on the scan rates up to 400 V/s and the electrochemical response of the modified electrode towards several redox probes showed that the attached layer acts as a conductive switch. Therefore, the electrode behaves as a barrier to electron transfer when the standard redox potential of the probe is below the layer switching potential, whereas the layer can be considered as transparent towards the electron transfer for redox probes with a redox potential above it.

Comparative Study on the Effect of Protonation Control for Resistive Gas Sensor Based on Close-Packed Polypyrrole Nanoparticles

Conducting polymers are often used as sensor electrodes due to their conjugated chain structure, which leads to high sensitivity and rapid response at room temperature. Numerous studies have been conducted on the structures of conducting polymer nanomaterials to increase the active surface area for the target materials. However, studies on the control of the chemical state of conducting polymer chains and the modification of the sensing signal transfer with these changes have not been reported. In this work, polypyrrole nanoparticles (PPyNPs), where is PPy is a conducting polymer, are applied as a sensor transducer to analyze the chemical sensing ability of the electrode. In particular, the protonation of PPy is adjusted by chemical methods to modify the transfer sensing signals with changes in the polymer chain structure. The PPyNPs that were modified at pH 1 exhibit high sensitivity to the target analyte (down to 1 ppb of NH3) with short response and recovery times of less than 20 s and 50 s, respectively, at 25 °C.

Closely Packed Polypyrroles via Ionic Cross-Linking: Correlation of Molecular Structure-Morphology-Thermoelectric Properties

A series of ionically interconnected polypyrrole (PPy) films are fabricated through two-monomer-connected-precursor polymerization by varying diacid linkers, thereby significantly influencing the crystalline morphology and electrical properties. The structure obtained using 1,5-napthalenedisulfonic acid (PPy-Nap) as a fused aromatic linker exhibits a higher electrical conductivity (∼78 S cm^-1) than that (6.7 S cm^-1) without a linker (PPy-ref). Cryogenic conductivity measurements reveal that the percolation carrier transport barrier of PPy-Nap is significantly smaller than that of PPy-ref, and the calculated carrier mobility of PPy-Nap is ∼5 times higher compared to PPy-ref. The carrier transport characteristics show a good agreement with morphological data by 2D grazing-incidence X-ray scattering. All PPys have similar doped charge carrier concentrations and, thus, similar Seebeck coefficients (5-8 μV K^-1) but very different electrical conductivities. Consequently, PPy-Nap exhibits a higher power factor than that of PPy-ref (0.21 vs 0.043 μW m^-1 K^-2). The results show that the trade-off relationship between the Seebeck coefficient and electrical conductivity can be overcome by improving crystalline morphology and carrier transport. Thus, both the electrical conductivities and thermoelectric power factors can be improved with maintaining the Seebeck coefficients by enhancing the ordered conductive domains and carrier mobility while maintaining the doping level.

Recent advances in poly(3,4-ethylenedioxyselenophene) and related polymers

This review highlights the recent progress in synthesis, properties, applications and future outlook of PEDOS based conjugated polymers.

Advances in nanomaterials for electrochromic devices

This review article systematically highlights the recent advances regarding the design, preparation, performance and application of new and unique nanomaterials for electrochromic devices.

Synthesis and electrochemical characterization of a new benzodioxocine-fused poly(N-methylpyrrole) derivative: a joint experimental and DFT study

Synthesis of a new electropolymerizable monomer, XyPMe, regarding the reaction of diethylN-methyl-3,4-dihydroxypyrrole-2,5-dicarboxylate and 1,2-bis(bromomethyl)benzene with concomitant hydrolysis and decarboxylation reactions was accomplished.

Electrochromic Self-Electrostabilized Polypyrrole Films Doped with Surfactant and Azo Dye

Two azo dyes, acid red 1 (AR1) and acid red 18 (AR18), were used alone or in combination with sodium dodecyl sulfate (SDS) for the electropolymerization of a pyrrole monomer. Polypyrrole (PPy) showed higher redox capacity when SDS and AR18 were used simultaneously as dopant agents (PPy/AR18-SDS) than when the conducting polymer was produced in the presence of SDS, AR18, AR1, or an AR1/SDS mixture. Moreover, PPy/AR18-SDS is a self-stabilizing material that exhibits increasing electrochemical activity with the number of oxidation–reduction cycles. A mechanism supported by scanning electron microscopy and X-ray diffraction structural observations was proposed to explain the synergy between the SDS surfactant and the AR18 dye. On the other hand, the Bordeaux red color of PPy/AR18-SDS, which exhibits an optical band gap of 1.9 eV, rapidly changed to orange-yellow and blue colors when films were reduced and oxidized, respectively, by applying linear or step potential ramps. Overall, the results indicate that the synergistic utilization of AR18 and SDS as dopant agents in the same polymerization reaction is a very successful and advantageous strategy for the preparation of PPy films with cutting-edge electrochemical and electrochromic properties.