In vitro antifungal activity and in vivo edible coating efficacy of insect-derived chitosan against Botrytis cinerea in strawberry

Strawberry is a perishable fruit, susceptible to development of rot by a range of fungi, in particular Botrytis cinerea. Chitosan represents an alternative to agrochemicals for improving shelf-life and fighting fungal pathogens. A chitosan-based coating derived from pupal exuviae of Hermetia illucens has been recently formulated for improving shelf-life of strawberry stored at 4 °C and mixed condition (4 °C and room temperature). The effects of a decolored (PEDEC) and not decolored (PEND) chitosan from the black soldier fly were evaluated and compared with commercial chitosans from crustaceans (CCs), in vitro and in vivo. An inhibition/reduction of fungal growth and a disturbance of normal fungal morphology were observed, being MIC of 0.5 mg mL-1 and 1 mg mL-1 and growth inhibition of 70 % and 4% for PEND and PEDEC, respectively. Both edible coatings distributed via aerograph showed equal or better potential application than CCs in controlling B. cinerea in strawberry post-harvest treated. Different effects for chitosans depended on their different molecular weight and deacetylation degree distributions, and the presence or absence of melanin pigments in their structure. PEND could act directly against the fungus, with effects predominantly associated with fungitoxic properties; PEDEC might principally provide viable alternatives, such as the elicitation of biochemical defense responses in fruits, for example through total phenols, in particular the flavonoids.

Optimizing chitosan derived from Metapenaeus affinis: a novel anti-biofilm agent against Pseudomonas aeruginosa

Pseudomonas aeruginosa is a commonly found Gram-negative bacterium in healthcare facilities and is renowned for its ability to form biofilms and its virulence factors that are controlled by quorum sensing (QS) systems. The increasing prevalence of multidrug-resistant strains of this bacterium poses a significant challenge in the field of medicine. Consequently, the exploration of novel antimicrobial agents has become a top priority. This research aims to optimize chitosan derived from white shrimp (Metapenaeus affinis) using the Response Surface Methodology (RSM) computational approach. The objective is to investigate chitosan's potential as a solution for inhibiting QS activity and biofilm formation in P. aeruginosa ATCC 10,145. Under optimized conditions, chitin was treated with NaOH (1.41 M) for 15.75 h, HCl (7.49% vol) for 2.01 h, and at a deacetylation temperature of 81.15 °C. The resulting chitosan exhibited a degree of deacetylation (DD%) exceeding 93.98%, as confirmed by Fourier-transform infrared (FTIR) spectral analysis, indicating its high purity. The extracted chitosan demonstrated a significant synergistic antibiotic effect against P. aeruginosa when combined with ceftazidime, enhancing its bactericidal activity by up to 15-fold. In addition, sub-MIC (minimum inhibitory concentration) concentrations of extracted chitosan (10 and 100 µg/mL) successfully reduced the production of pyocyanin and rhamnolipid, as well as the swimming motility, protease activity and biofilm formation ability in comparison to the control group (P < 0.05). Moreover, chitosan treatment downregulated the RhlR and LasR genes in P. aeruginosa when compared to the control group (P < 0.05). The optimized chitosan extract shows significant potential as a coating agent for surgical equipment, effectively preventing nosocomial infections caused by P. aeruginosa pathogens.

A sustainable green-approach for biofabrication of chitosan nanoparticles, optimization, characterization, its antifungal activity against phytopathogenic Fusarium culmorum and antitumor activity

Chitosan is a natural non-toxic, biocompatible, biodegradable, and mucoadhesive polymer. It also has a broad spectrum of applications such as agriculture, medical fields, cosmetics and food industries. In this investigation, chitosan nanoparticles were produced by an aqueous extract of Cympopogon citratus leaves as a reducing agent. According to the SEM and TEM micrographs, CNPs had a spherical shape, and size ranging from 8.08 to 12.01 nm. CNPs have a positively charged surface with a Zeta potential of + 26 mV. The crystalline feature of CNPs is determined by X-ray diffraction. There are many functional groups, including C꞊C, CH2-OH, C-O, C-S, N-H, CN, CH and OH were detected by FTIR analysis. As shown by the thermogravimetric study, CNPs have a high thermal stability. For the optimization of the green synthesis of CNPs, a Face centered central composite design (FCCCD) with 30 trials was used. The maximum yield of CNPs (13.99 mg CNPs/mL) was produced with chitosan concentration 1.5%, pH 4.5 at 40 °C, and incubation period of 30 min. The antifungal activity of CNPs was evaluated against phytopathogenic fungus; Fusarium culmorum. A 100% rate of mycelial growth inhibition was gained by the application of 20 mg CNPs/mL. The antitumor activity of the green synthesized CNPs was examined using 6 different cell lines, the viability of the cells reduced when the concentration of green synthesized CNPs increased, the IC50 dose of the green synthesized CNPs on the examined cell lines HePG-2, MCF-7, HCT-116, PC-3, Hela and WI-38 was 36.25 ± 2.3, 31.21 ± 2.2, 67.45 ± 3.5, 56.30 ± 3.3, 44.62 ± 2.6 and 74.90 ± 3.8; respectively.

Update on Chitin and Chitosan from Insects: Sources, Production, Characterization, and Biomedical Applications

Insects, renowned for their abundant and renewable biomass, stand at the forefront of biomimicry-inspired research and offer promising alternatives for chitin and chitosan production considering mounting environmental concerns and the inherent limitations of conventional sources. This comprehensive review provides a meticulous exploration of the current state of insect-derived chitin and chitosan, focusing on their sources, production methods, characterization, physical and chemical properties, and emerging biomedical applications. Abundant insect sources of chitin and chitosan, from the Lepidoptera, Coleoptera, Orthoptera, Hymenoptera, Diptera, Hemiptera, Dictyoptera, Odonata, and Ephemeroptera orders, were comprehensively summarized. A variety of characterization techniques, including spectroscopy, chromatography, and microscopy, were used to reveal their physical and chemical properties like molecular weight, degree of deacetylation, and crystallinity, laying a solid foundation for their wide application, especially for the biomimetic design process. The examination of insect-derived chitin and chitosan extends into a wide realm of biomedical applications, highlighting their unique advantages in wound healing, tissue engineering, drug delivery, and antimicrobial therapies. Their intrinsic biocompatibility and antimicrobial properties position them as promising candidates for innovative solutions in diverse medical interventions.

Potential anthelmintic effect of chitosan on Syphacia muris infecting Wistar rats: biochemical, immunological, and histopathological studies

Natural products extracted from animal sources have many biological activities, such as chitosan, which is being researched for its medicinal or therapeutic potential. Syphacia muris is the most well-known intestinal nematode, infecting laboratory rats and influencing their immune systems. In this study, we looked at the anthelminthic activity of chitosan particles against S. muris infection using biochemical, immunological, and histopathological methods. Chitosan particles were characterized using Fourier-transform infrared spectroscopy (FTIR). Rats were separated into four groups, each consisting of seven individuals (n = 7). The first group was the control (non-infected), the second group was infected, and both groups received 0.5 ml of 1% glacial acetic acid orally. The third group was the infected group (treated), and the fourth group (normal) received 0.5 ml of 30 mg/kg/day chitosan dissolved in 1% glacial acetic acid for 14 days using gavage. Liver and kidney parameters, oxidative stress markers, serum levels of cytokines (IFN-γ, IL-5, IL-13, IL-33, and IL-10), as well as immunoglobulins (total IgE and IgG), were assessed. Histological examinations of host tissues (intestine, liver, kidney, and spleen) were also performed. Following chitosan treatment, a significant decrease in worm count (P < 0.05) was indicated; this was associated with an enhancement of biochemical and oxidative stress biomarkers, which were altered due to infection. Moreover, immunological analysis revealed a significant drop in INF-γ, IL-5, IL-13, and IL-33 levels and total immunoglobulins (IgE and IgG) as well as an improvement in rat tissues. Conclusively, this study showed the anthelminthic effect of chitosan against S. muris infection.

Preparation of water-soluble chitosan oligosaccharides by oxidative hydrolysis of chitosan powder with hydrogen peroxide

Chitosan (CS) is only soluble in weak acid medium, thereby limiting its wide utilisation in the field of biomedicine, food, and agriculture. In this report, we present a method for preparing water-soluble CS oligosaccharides (COSs) at high concentration (∼10%, w/v) via the oxidative hydrolysis of CS powder with molecular weight (Mw) ∼90,000 g/mol) in 2% H2O2 solution at ambient temperature by a two-step process, namely, the heterogeneous hydrolysis step and homogeneous hydrolysis step. The resultant COSs were characterised by gel permeation chromatography (GPC), fourier transforms infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV-Vis), proton nuclear magnetic resonance spectroscopy (1H NMR) and X-ray diffraction (XRD) spectroscopy. The resulting products were composed of COSs (Mw of 2000-6600 g/mol) that were completely soluble in water. The results also indicated that the structure of COSs was almost unchanged compared with the original CS unless Mw was low. Accordingly, COSs with low Mw (∼2000 g/mol) and high concentration (10%, w/v) could be effectively prepared by the oxidative hydrolysis of CS powder using hydrogen peroxide under ambient conditions.

Chitosan-induced biotic stress tolerance and crosstalk with phytohormones, antioxidants, and other signalling molecules

Several polysaccharides augment plant growth and productivity and galvanise defence against pathogens. Such elicitors have ecological superiority over traditional growth regulators, considering their amplified biocompatibility, biodegradability, bioactivity, non-toxicity, ubiquity, and inexpensiveness. Chitosan is a chitin-derived polysaccharide that has recently been spotlighted among plant scientists. Chitosan supports plant growth and development and protects against microbial entities such as fungi, bacteria, viruses, nematodes, and insects. In this review, we discuss the current knowledge of chitosan's antimicrobial and insecticidal potential with recent updates. These effects are further explored with the possibilities of chitosan's active correspondence with phytohormones such as jasmonic acid (JA), salicylic acid (SA), indole acetic acid (IAA), abscisic acid (ABA), and gibberellic acid (GA). The stress-induced redox shift in cellular organelles could be substantiated by the intricate participation of chitosan with reactive oxygen species (ROS) and antioxidant metabolism, including hydrogen peroxide (H2O2), superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD). Furthermore, we propose how chitosan could be intertwined with cellular signalling through Ca2+, ROS, nitric oxide (NO), transcription factors (TFs), and defensive gene activation.

Potential of biogenic and non-biogenic waste materials as flocculant for algal biomass harvesting: Mechanism, parameters, challenges and future prospects

In this review article, waste materials (biogenic/non-biogenic) are focused as the flocculants for harvesting of algal biomass. Chemical flocculants are widely utilized for the effective harvesting of algal biomass at a commercial scale while the high cost is a major drawback. The waste materials-based flocculants (WMBF) are started to utilize as one of the cost-effective performance for dual benefits of waste minimization and reuse for sustainable recovery of biomass. The novelty of the article is articulated with the objective that presents an insight of WMBF, classification of WMBF, preparation methods of WMBF, mechanisms of flocculation, factors affecting flocculation-mechanism, challenges and future recommendations that are required for harvesting of algae. The WMBF are shown similar flocculation mechanisms and flocculation efficiencies as chemical flocculants. Thus, the utilization of waste material for the flocculation process of algal cells minimizes the waste load into the environment and transforms the waste materials into valuable resources.

Effects of Chitosan Nanoparticles and 4,4' Methylene-Diphenyl Diisocyanate on the Polylactic Acid/Poly (Butyleneadipate-Co-Terephthalate) Composite Properties

Polylactic acid (PLA) is considered a mature alternative to synthetic plastics made from petroleum by-products, possessing the advantages of good mechanical strength. However, it also has some disadvantages such as brittleness and low toughness. In order to overcome and improve some of these unfavorable properties, PLA/PBAT composites were prepared by blending PLA with Poly (butylene adipate-co-terephthalate) (PBAT), and adding 4,4'-methylene diphenyl diisocyanate (MDI) and chitosan nanoparticles (ChNPs) as compatibilizers to investigate the effects of different compatibilizers on the properties of the composites. The main observations are as follows: FT-IR indicated that MDI did not add new groups, while the addition of ChNPs added a substantial amount of hydroxyl and methylene groups. The addition of both MDI and ChNPs did not have any effect on the crystalline shape of the composites, but could potentially reduce their crystallinity, increase the melt peak temperature, wet the boundary of the PLA and PBAT phases, decrease the size of the dispersed phases, reduce the number of dispersed phases, and improve interfacial compatibility. The incorporation of MDI increased the tensile strength from 13.02 MPa to 19.24 MPa, whereas the addition of ChNPs substantially enhanced the elongation at the break from 3.84% to 19.24%. Furthermore, the inclusion of MDI conferred enhanced moisture resistance, whereas the addition of ChNPs seemed to weaken the resistance to moisture.

A Review of the Preparation, Characterization, and Applications of Chitosan Nanoparticles in Nanomedicine

Chitosan is a fibrous compound derived from chitin, which is the second most abundant natural polysaccharide and is produced by crustaceans, including crabs, shrimps, and lobsters. Chitosan has all of the important medicinal properties, including biocompatibility, biodegradability, and hydrophilicity, and it is relatively nontoxic and cationic in nature. Chitosan nanoparticles are particularly useful due to their small size, providing a large surface-to-volume ratio, and physicochemical properties that may differ from that of their bulk counterparts; thus, chitosan nanoparticles (CNPs) are widely used in biomedical applications and, particularly, as contrast agents for medical imaging and as vehicles for drug and gene delivery into tumors. Because CNPs are formed from a natural biopolymer, they can readily be functionalized with drugs, RNA, DNA, and other molecules to target a desired result in vivo. Furthermore, chitosan is approved by the United States Food and Drug Administration as being Generally Recognized as Safe (GRAS). This paper reviews the structural characteristics and various synthesis methods used to produce chitosan nanoparticles and nanostructures, such as ionic gelation, microemulsion, polyelectrolyte complexing, emulsification solvent diffusion, and the reverse micellar method. Various characterization techniques and analyses are also discussed. In addition, we review drug delivery applications of chitosan nanoparticles, including for ocular, oral, pulmonary, nasal, and vaginal methodologies, and applications in cancer therapy and tissue engineering.

Artificial intelligence-based optimization for chitosan nanoparticles biosynthesis, characterization and in‑vitro assessment of its anti-biofilm potentiality

Chitosan nanoparticles (CNPs) are promising biopolymeric nanoparticles with excellent physicochemical, antimicrobial, and biological properties. CNPs have a wide range of applications due to their unique characteristics, including plant growth promotion and protection, drug delivery, antimicrobials, and encapsulation. The current study describes an alternative, biologically-based strategy for CNPs biosynthesis using Olea europaea leaves extract. Face centered central composite design (FCCCD), with 50 experiments was used for optimization of CNPs biosynthesis. The artificial neural network (ANN) was employed for analyzing, validating, and predicting CNPs biosynthesis using Olea europaea leaves extract. Using the desirability function, the optimum conditions for maximum CNPs biosynthesis were determined theoretically and verified experimentally. The highest experimental yield of CNPs (21.15 mg CNPs/mL) was obtained using chitosan solution of 1%, leaves extract solution of 100%, initial pH 4.47, and incubation time of 60 min at 53.83°C. The SEM and TEM images revealed that CNPs had a spherical form and varied in size between 6.91 and 11.14 nm. X-ray diffraction demonstrates the crystalline nature of CNPs. The surface of the CNPs is positively charged, having a Zeta potential of 33.1 mV. FTIR analysis revealed various functional groups including C-H, C-O, CONH2, NH2, C-OH and C-O-C. The thermogravimetric investigation indicated that CNPs are thermally stable. The CNPs were able to suppress biofilm formation by P. aeruginosa, S. aureus and C. albicans at concentrations ranging from 10 to 1500 µg/mL in a dose-dependent manner. Inhibition of biofilm formation was associated with suppression of metabolic activity, protein/exopolysaccharide moieties, and hydrophobicity of biofilm encased cells (r ˃ 0.9, P = 0.00). Due to their small size, in the range of 6.91 to 11.14 nm, CNPs produced using Olea europaea leaves extract are promising for applications in the medical and pharmaceutical industries, in addition to their potential application in controlling multidrug-resistant microorganisms, especially those associated with post COVID-19 pneumonia in immunosuppressed patients.

Application of depolymerized chitosan in crop production: A review

Currently, chitosan (CHT) is well known for its uses, particularly in veterinary and agricultural fields. However, chitosan's uses suffer greatly due to its extremely solid crystalline structure, it is insoluble at pH levels above or equal to 7. This has sped up the process of derivatizing and depolymerizing it into low molecular weight chitosan (LMWCHT). As a result of its diverse physicochemical as well as biological features which include antibacterial activity, non-toxicity, and biodegradability, LMWCHT has evolved into new biomaterials with extremely complex functions. The most important physicochemical and biological property is antibacterial, which has some degree of industrialization today. CHT and LMWCHT have potential due to the antibacterial and plant resistance-inducing properties when applied in crop production. This study has highlighted the many advantages of chitosan derivatives as well as the most recent studies on low molecular weight chitosan applications in crop development.

Chitosan-carbon nanofiber based disposable bioelectrode for electrochemical detection of oxytocin

Bioelectrodes with low carbon footprint can provide an innovative solution to the surmounting levels of e-waste. Biodegradable polymers offer green and sustainable alternatives to synthetic materials. Here, a chitosan-carbon nanofiber (CNF) based membrane has been developed and functionalized for electrochemical sensing application. The surface characterization of the membrane revealed crystalline structure with uniform particle distribution, and surface area of 25.52 m²/g and pore volume of 0.0233 cm³/g. The membrane was functionalized to develop a bioelectrode for the detection of exogenous oxytocin in milk. Electrochemical impedance spectroscopy was employed to determine oxytocin in a linear concentration range of 10 to 10⁵ ng/mL. The developed bioelectrode showed an LOD of 24.98 ± 11.37 pg/mL and sensitivity of 2.77 × 10^-10 Ω / log ng mL^-1/mm² for oxytocin in milk samples with 90.85-113.34 percent recovery. The chitosan-CNF membrane is ecologically safe and opens new avenues for environment-friendly disposable materials for sensing applications.

Molar-mass-dependent antibacterial activity of cationic dextran derivatives against resistant nosocomial pathogens

The rise of various multidrug-resistant bacteria has created a need for new biocompatible and biodegradable antibacterial compounds. Cationic polysaccharides are promising candidates for this role. Therefore, cationic derivatives of commercial dextrans with molar masses of 11 kDa, 76 kDa, 411 kDa, and 1500-2500 kDa and various degrees of substitution (DS_Q 0.34-0.52) were prepared and their antimicrobial properties against four gram-negative nosocomial bacteria were tested. As expected, a higher DS_Q led to higher efficiency. The best antimicrobial properties were found for derivatives of 411 kDa, followed by 76 kDa and 1500-2000 kDa dextrans. This indicates that there is a certain optimum molar mass with the best antimicrobial properties. However, as molar mass increased, the biocompatibility of cationic dextran steadily decreased, with increased hemagglutination and toxicity being seen for human cells. The derivatives of 76 kDa dextran with higher DS_Q (0.40-0.52) were the best antimicrobial agents suitable for further clinical testing.

A comprehensive review on recent advances in preparation, physicochemical characterization, and bioengineering applications of biopolymers

Biopolymers are mainly the polymers which are created or obtained from living creatures such as plants and bacteria rather than petroleum, which has traditionally been the source of polymers. Biopolymers are chain-like molecules composed of repeated chemical blocks derived from renewable resources that may decay in the environment. The usage of biomaterials is becoming more popular as a means of reducing the use of non-renewable resources and reducing environmental pollution produced by synthetic materials. Biopolymers' biodegradability and non-toxic nature help to maintain our environment clean and safe. This study discusses how to improve the mechanical and physical characteristics of biopolymers, particularly in the realm of bioengineering. The paper begins with a fundamental introduction and progresses to a detailed examination of synthesis and a unique investigation of several recent focused biopolymers with mechanical, physical, and biological characterization. Biopolymers' unique non-toxicity, biodegradability, biocompatibility, and eco-friendly features are boosting their applications, especially in bioengineering fields, including agriculture, pharmaceuticals, biomedical, ecological, industrial, aqua treatment, and food packaging, among others, at the end of this paper. The purpose of this paper is to provide an overview of the relevance of biopolymers in smart and novel bioengineering applications.

Graphical abstract

The Graphical abstract represents the biological sources and applications of biopolymers. Plants, bacteria, animals, agriculture wastes, and fossils are all biological sources for biopolymers, which are chemically manufactured from biological monomer units, including sugars, amino acids, natural fats and oils, and nucleotides. Biopolymer modification (chemical or physical) is recognized as a crucial technique for modifying physical and chemical characteristics, resulting in novel materials with improved capabilities and allowing them to be explored to their full potential in many fields of application such as tissue engineering, drug delivery, agriculture, biomedical, food industries, and industrial applications.

Chitosan as a potential natural compound to manage plant diseases

The necessity for non-chemical approaches has grown as awareness of the dangers posed by pesticides has spread. Chitosan, due to its biocompatibility, biodegradability, and bioactivity is one the effective choice in phytopathology. Chitosan is a biopolymer that reduces plant diseases through two main mechanisms: (1) Direct antimicrobial function against pathogens, including plasma membrane damage mechanisms, interactions with DNA and RNA (electrostatic interactions), metal chelating capacity, and deposition onto the microbial surface, (2) Induction of plant defense responses resulting from downstream signalling, transcription factor activation, gene transcription and finally cellular activation after recognition and binding of chitin and chitosan by cell surface receptors. This biopolymer have potential with capability to combating fungi, bacteria, and viruses phythopathogens. Chitosan is synthesized by deacetylating chitin. The degree of deacetylation and molecular weight of chitosan are variable and have been mentioned as important structural parameters in chitosan's biological properties. Chitosan with a higher degree of deacetylation (>70 %) has better biological properties. Many crops able to withstand pre- and post-harvest illnesses better after receiving chitosan as a seed treatment, soil amendment, or foliar spray. This review discussed the properties and use of chitosan and focuses on its application as a plant resistance inducer against pathogens.

Pharmaceutical and drug delivery applications of chitosan biopolymer and its modified nanocomposite: A review

Due to their improved structural and functional properties as well as biocompatibility, biodegradability, and nontoxicity, chitosan and its nanoparticles are currently grasping the interest of researchers. Although numerous attempts have been made to apply chitosan and its derivatives to biological applications, few have reported in achieving its pharmacological and drug delivery. The goal of the current work is to provide a summary of the chitosan biopolymer's physical, chemical, and biological properties as well as its synthesis of nanoparticles and characterization of its modified nanocomposites. The drug delivery method and pharmaceutical applications of chitosan biopolymer and its modified nanocomposites are examined in further detail in this research. We will introduce also about the most current publications in this field of study as well as its recent expansion.

Incidence of gastrointestinal parasites in pigeons with an assessment of the nematocidal activity of chitosan nanoparticles against Ascaridia columbae

In this investigation, the incidence and intensity of gastrointestinal parasites of domestic pigeons were evaluated, additionally, in vitro and in vivo evaluation of the antiparasitic activity of chitosan nanoparticles against the most predominant gut parasite. Therefore, 240 domestic pigeons (160 adults and 80 squabs) obtained from different localities in Giza governorate, Egypt, from February to July 2021, were subjected to parasitological and postmortem examination. The results revealed that 97% of pigeons were vulnerable to single or mixed gastrointestinal parasites. The detected helminths were identified as Capillaria columbae (C. columbae) with a total incidence of (12.5%), Ascaridia columbae (A. columbae) (83.3.%), Heterakis gallinarum (H. gallinarum) (18.7%), Raillietina cesticillus (R. cesticillus) (7.5%), Raillietina echinobothrida (R. echinobothrida) (29%), Choanotaenia infundibulum (C. infundibulum) (22.9%), Davainea proglottina (D. proglottina) (26.6%), and Cotugnia proglottina (C. proglottina) (14.5%). At the same time, the identified protozoan parasites were Trichomonas gallinae (T. gallinae), and Eimeria columbae (E. columbae), with a total incidence of 25 and 79%, respectively. Helminths and Eimeria infections were higher in adults than squabs, while T. gallinae infection was reported with a higher incidence in squabs (62.5%) than adults (6.2%). From our findings, A. columbae was the most predominant gut parasite in the examined pigeons. Thus, it was subjected to in vitro and in vivo treatment with chitosan nanoparticles. Serum and tissue samples were collected from the birds which have been used in the in vitro study to evaluate the oxidative stress markers as malondialdehyde (MDA), Nitric oxide levels and Tumor Necrosis Factor-alpha (TNF-α) and Interleukin-1β activity also, chitosan nanoparticles- treated worm ultrastructure were determined using scanning electron microscopy (SEM). Finally, we recommend periodic monitoring of pigeon's farm to detect the parasitic infestation, and from our results, we recommend chitosan nanoparticles as a potent nematocidal agent.

Application of Elicitors in Grapevine Defense: Impact on Volatile Compounds

Elicitors as alternatives to agrochemicals are widely used as a sustainable farming practice. The use of elicitors in viticulture to control disease and improve phenolic compounds is widely recognized in this field. Concurrently, they also affect other secondary metabolites, such as aroma compounds. Grape and wine aroma compounds are an important quality factor that reflects nutritional information and influences consumer preference. However, the effects of elicitors on aroma compounds are diverse, as different grape varieties respond differently to treatments. Among the numerous commercialized elicitors, some have proven very effective in improving the quality of grapes and the resulting wines. This review summarizes some of the elicitors commonly used in grapevines for protection against biotic and abiotic stresses and their impact on the quality of volatile compounds. The work is intended to serve as a reference for growers for the sustainable development of high-quality grapes.

Deciphering the role of plant plasma membrane lipids in response to invasion patterns: how could biology and biophysics help?

Plants have to constantly face pathogen attacks. To cope with diseases, they have to detect the invading pathogen as early as possible via the sensing of conserved motifs called invasion patterns. The first step of perception occurs at the plasma membrane. While many invasion patterns are perceived by specific proteinaceous immune receptors, several studies have highlighted the influence of the lipid composition and dynamics of the plasma membrane in the sensing of invasion patterns. In this review, we summarize current knowledge on how some microbial invasion patterns could interact with the lipids of the plasma membrane, leading to a plant immune response. Depending on the invasion pattern, different mechanisms are involved. This review outlines the potential of combining biological with biophysical approaches to decipher how plasma membrane lipids are involved in the perception of microbial invasion patterns.

Transcriptomic and Metabolomic Analysis Reveal Possible Molecular Mechanisms Regulating Tea Plant Growth Elicited by Chitosan Oligosaccharide

Chitosan oligosaccharide (COS) plays an important role in the growth and development of tea plants. However, responses in tea plants trigged by COS have not been thoroughly investigated. In this study, we integrated transcriptomics and metabolomics analysis to understand the mechanisms of chitosan-induced tea quality improvement and growth promotion. The combined analysis revealed an obvious link between the flourishing development of the tea plant and the presence of COS. It obviously regulated the growth and development of the tea and the metabolomic process. The chlorophyll, soluble sugar, and amino acid content in the tea leaves was increased. The phytohormones, carbohydrates, and amino acid levels were zoomed-in in both transcript and metabolomics analyses compared to the control. The expression of the genes related to phytohormones transduction, carbon fixation, and amino acid metabolism during the growth and development of tea plants were significantly upregulated. Our findings indicated that alerted transcriptomic and metabolic responses occurring with the application of COS could cause efficiency in substrates in pivotal pathways and hence, elicited plant growth.

A review on super-wettable porous membranes and materials based on bio-polymeric chitosan for oil-water separation

Appropriate surface wettability of membranes and materials are of an extreme importance for targeting separation of mixtures/emulsions such as oil from water or conversely water from oil. The development of super-wettable membranes and materials surfaces have shown remarkable potential for recovering water from oil-water emulsion while offering maximum resistance to fouling. The availability of clean and potable water has been regarded as an important global challenge for coming human generations. Oil and gas industry is continuously producing immense quantities of waste stream regarded as produced water which contains oil dispersed in water along with other several components. Treating such immense quantities of oily wastewater is of utmost need for recovering precious water for possible reuse or safe disposal. Various technologies have been developed for targeting the separation of oil-water emulsions or mixtures to harness useful potable water and oil as products. Membrane-based separations or use of porous materials such as mesh have been explored in literature for separation of oil-water mixtures/emulsions. Given the unique features of special hydrophilicity, ease of tunability, control of molecular weight, abundant availability, and potential for commercial scale up, chitosan has been extensively used for modifying membranes/meshes or preparing composites with other materials for oil-water separations. This review has described in detail the synthesis, methods of modification and application of chitosan-based super-wettable membranes/meshes and porous materials for oil-water separation. The special wettability features including super-hydrophobicity/superoleophilicity, super-oleophobicity/super-hydrophilicity and super-hydrophilicity/underwater super-oleophobicity of various chitosan-based membranes and materials have been discussed in detail in the review. The strategies for enhancing or developing special wettability for target specific applications have also been discussed. Finally, the challenges, their respective importance have been identified along with a discussion on possible solutions to these challenges.

Turning food waste to antibacterial and biocompatible fungal chitin/chitosan monofilaments

Here, cell wall of a zygomycete fungus, Rhizopus delemar, grown on bread waste was wet spun into monofilaments. Using the whole cell wall material omits the common chitosan isolation and purification steps and leads to higher material utilization. The fungal cell wall contained 36.9% and 19.7% chitosan and chitin, respectively. Solid state NMR of the fungal cell wall material confirmed the presence of chitosan, chitin, and other carbohydrates. Hydrogels were prepared by ultrafine grinding of the cell wall, followed by addition of lactic acid to protonate the amino groups of chitosan, and subsequently wet spun into monofilaments. The monofilament inhibited the growth of Bacillus megaterium (Gram+ bacterium) and Escherichia coli (Gram- bacterium) significantly (92.2% and 99.7% respectively). Cytotoxicity was evaluated using an in vitro assay with human dermal fibroblasts, indicating no toxic inducement from exposure of the monofilaments. The antimicrobial and biocompatible fungal monofilaments, open new avenues for sustainable biomedical textiles from abundant food waste.

The Complex Metabolomics Crosstalk Triggered by Four Molecular Elicitors in Tomato

The elicitation of plant secondary metabolism may offer interesting opportunities in the framework of sustainable approaches in plant science and in terms of their ability to prime resistance to biotic and abiotic stressors. The broad metabolic reprogramming triggered by different molecular elicitors, namely salicylate (SA), polyamines (PAs), and chitosan, was comprehensively investigated using a metabolomics approach and the tomato (Solanum lycopersicum L.) as the model crop. Six different treatments were compared: a negative control (no treatments), a second negative control treated with 1 M acetic acid (the reference for chitosan, since chitosan was solubilized in acetic acid), and four molecular elicitors, 1 mM 2,1,3-benzothiadiazole (BTH, a positive control), 10 mg/mL chitosan, 0.01 mM SA, and a 0.1 mM PA (putrescine, spermidine, and spermine). All treatments determined a slight increase in biomass, in particular following PA treatment. A broad reprogramming of secondary metabolism could be observed, including membrane lipid remodeling, phenylpropanoid antioxidants, and phytohormone crosstalk. Overall, our results suggest that PAs, SA, and BTH shared a systemic acquired resistance (SAR)-related response, whereas chitosan induced a more distinct induced systemic resistance (ISR)-like jasmonate-related response. These results pave the way towards the possible use of elicitors as a sustainable tool in plant science and agriculture by increasing crop resilience to biotic and abiotic stressors without detrimental effects on plant biomass.

Chitosan Sensitivity of Fungi Isolated from Mango (Mangifera indica L.) with Anthracnose

In Mexico, the mango crop is affected by anthracnose caused by Colletotrichum species. In the search for environmentally friendly fungicides, chitosan has shown antifungal activity. Therefore, fungal isolates were obtained from plant tissue with anthracnose symptoms from the state of Guerrero in Mexico and identified with the ITS and β-Tub₂ genetic markers. Isolates of the Colletotrichum gloeosporioides complex were again identified with the markers ITS, Act, β-Tub₂, GADPH, CHS-1, CaM, and ApMat. Commercial chitosan (Aldrich, lot # STBF3282V) was characterized, and its antifungal activity was evaluated on the radial growth of the fungal isolates. The isolated anthracnose-causing species were C. chrysophilum, C. fructicola, C. siamense, and C. musae. Other fungi found were Alternaria sp., Alternaria tenuissima, Fusarium sp., Pestalotiopsis sp., Curvularia lunata, Diaporthe pseudomangiferae, and Epicoccum nigrum. Chitosan showed 78% deacetylation degree and a molecular weight of 32 kDa. Most of the Colletotrichum species and the other identified fungi were susceptible to 1 g L⁻¹ chitosan. However, two C. fructicola isolates were less susceptible to chitosan. Although chitosan has antifungal activity, the interactions between species of the Colletotrichum gloeosporioides complex and their effect on chitosan susceptibility should be studied based on genomic changes with molecular evidence.

The Multilateral Efficacy of Chitosan and Trichoderma on Sugar Beet

The majority of all fungal formulations contain Trichoderma spp., making them effective biological control agents for agriculture. Chitosan, one of the most effective natural biopolymers, was also reported as a plant resistance enhancer and as a biocide against a variety of plant pathogens. An in vitro three-way interaction assay of T. atroviride, chitosan, and important plant pathogens (such as Cercospora beticola and Fusarium oxysporum) revealed a synergistic effect on fungistasis. Furthermore, chitosan coating on Beta vulgaris ssp. vulgaris seeds positively affected the onset and efficiency of germination. We show that priming with T. atroviride spores or chitosan leads to the induced expression of a pathogenesis-related gene (PR-3), but only supplementation of chitosan led to significant upregulation of phytoalexin synthesis (PAL) and oxidative stress-related genes (GST) as a defense response. Repeated foliar application of either agent promoted growth, triggered defense reactions, and reduced incidence of Cercospora leaf spot (CLS) disease in B. vulgaris. Our data suggest that both agents are excellent candidates to replace or assist common fungicides in use. Chitosan triggered the systemic resistance and had a biocidal effect, while T. atroviride mainly induced stress-related defense genes in B. vulgaris. We assume that both agents act synergistically across different signaling pathways, which could be of high relevance for their combinatorial and thus beneficial application on field.

Promising Methods of Antibacterial Finishing of Textile Materials

A review article, containing information on the options, possibilities, and prospects for the development of antibacterial finishing of textile materials, is presented. A wide range of products designed to impart antibacterial, antimicrobial, and antiviral properties to textile materials is considered. The main factors determining the appropriate decision on the technological and functional choice of the protective composition are presented, including the nature of the fiber-forming polymer, the tasks that the resulting material is designed to solve, and its application options. Compositions providing the required effect of destruction of the pathogenic flora and their application technologies are described. Special attention is paid to antimicrobial agents based on silver nanoparticles. Nanoparticles of this metal have a detrimental effect on antibiotic-resistant strains of bacteria; their effectiveness is higher as compared to a number of well-known antibiotics, for example, penicillin and its analogues. Silver nanoparticles are harmless to the human body. Acting as an inhibitor, they limit the activity of the enzyme responsible for oxygen consumption by single-cell bacteria, viruses, and fungi. In this case, silver ions bind to the outer and inner proteins of the bacterial cell membranes, blocking cellular respiration and reproduction. Various options to apply microencapsulation methods for the implementation of antibacterial finishing are considered, including: phase separation, suspension crosslinking, simple and complex coacervation, spray drying, crystallization from the melt, evaporation of the solvent, co-extrusion, layering, fluidized bed spraying, deposition, emulsion and interphase polymerization, layer-by-layer electrostatic self-assembly etc. All presented technologies are at various development stages-from the laboratory stage to production tests, they all have certain advantages and disadvantages. The accelerated development and implementation of the described methods in production of textile materials is relevant and is related to the existing complex epidemiological situation in the world.

The use of chitosan as a skin-regeneration agent in burns injuries: A review

Chitosan is an amino-polysaccharide, traditionally obtained by the partial deacetylation of chitin from exoskeletons of crustaceans. Properties such as biocompatibility, hemostasis, and the ability to absorb physiological fluids are attributed to this biopolymer. Chitosan’s biological properties are regulated by its origin, polymerization degree, and molecular weight. In addition, it possesses antibacterial and antifungal activities. It also has been used to prepare films, hydrogels, coatings, nanofibers, and absorbent sponges, all utilized for the healing of skin wounds. In in vivo studies with second-degree burns, healing has been achieved in at least 80% of the cases between the ninth and twelfth day of treatment with chitosan coatings. The crucial steps in the treatment of severe burns are the early excision of damaged tissue and adequate coverage to minimize the risk of infection. So far, partial-thickness autografting is considered the gold standard for the treatment of full-thickness burns. However, the limitations of donor sites have led to the development of skin substitutes. Therefore, the need for an appropriate dermal equivalent that functions as a regeneration template for the growth and deposition of new skin tissue has been recognized. This review describes the properties of chitosan that validate its potential in the treatment of skin burns.

Chitosan Treatment of E-11 Cells Modulates Transcription of Nonspecific Immune Genes and Reduces Nodavirus Capsid Protein Gene Expression

This study explores whether crustacean products inhibit viral infections in aquaculture. Chitosan (CHT) was extracted from waste products of Parapenaeus longirostris. Biochemical composition, viscosity measurement, molecular weight, structure and cytotoxicity tests were used to characterize the extracted chitosan. Cultures of E-11 cells derived from snakehead Ophicephalus striatus were inoculated with 106.74 TCID50 of an isolate of betanodavirus genotype RGNNV (redspotted grouper nervous necrosis virus) after being treated with solutions of 0.3% CHT for 1 h at room temperature. The antiviral effect of CHT was assessed by comparing the ability of RGNVV to replicate and produce cytopathic effects on CHT-treated cell cultures. The change in RNA expression levels of the nodavirus capsid protein gene and three mediator genes in infected cells with or without CHT treatment was evaluated by qPCR. Changes in gene expression compared to control groups were monitored at 6, 24, 48 and 71 h post treatment in all target gene transcripts. The CCR3 expression in CHT treated cells showed a significant increase (p < 0.05) until day 3. On the other hand, the expression of TNF-α decreased significantly (p < 0.05) in CHT treated cells throughout the experimental period. Likewise, the expression of the IL-10 gene showed a significant downregulation in CHT treated cells at all time points (p ≤ 0.05). As further evidence of an antiviral effect, CHT treatment of cells produced a reduction in virus load as measured by a reduced expression of the viral capsid gene and the increase in RQ values from 406 ± 1.9 at hour 1 to 695 ± 3.27 at 72 h post inoculation. Statistical analysis showed that the expression of the viral capsid gene was significantly lower in cells treated with chitosan (p ≤ 0.05). These results improve our knowledge about the antiviral activity of this bioactive molecule and highlight its potential use in fish feed industry.

Biological activity of chitosan inducing resistance efficiency of rice (Oryza sativa L.) after treatment with fungal based chitosan

Reduced pathogen resistance and management of the left-over rice stubble are among the most important challenges faced in rice cultivation. A novel and eco-friendly strategy to synthesise 'Fungal Chitosan' (FC) from Aspergillus niger using rice straw could serve as a sustainable treatment approach to improve both disease resistance and yields, while also effectively managing the rice stubble waste. The FC treatment promoted germination as well as growth parameters in rice varieties, TN1 (high yielding-susceptible) and PTB33 (low yielding-resistant) better than a commercial chitosan (PC). Treatments of exogenously applied FC to plants produced direct toxicity to Xoo, and reduced the BLB disease index by 39.9% in TN1. The capability of FC to trigger a cascade of defense pathways was evident from the measurable changes in the kinetics of defense enzymes, peroxidase (POD) and polyphenol oxidase (PPO). FC treatment increased levels of POD in TN1 by 59.4%, which was 35.3% greater than that of untreated PTB33. Therefore, the study demonstrated the effectiveness of FC treatments for use in agriculture as a potential biostimulant as well as protective agent against bacterial leaf blight, BLB, of rice (Oryza sativa) that could be produced from stubble waste and improve rice stubble management strategies.

Nanomaterial-based encapsulation for controlled gastrointestinal delivery of viable probiotic bacteria

Probiotics are microorganisms that have beneficial health effects when administered in adequate dosages. The oral administration of probiotic bacteria is widely considered beneficial for both intestinal as well as systemic health but its clinical efficacy is conflicted in the literature. This may at least in part be due to the loss of viability during gastrointestinal passage resulting in poor intestinal delivery. Microencapsulation technology has been proposed as a successful strategy to address this problem by maintaining the viability of probiotics, thereby improving their efficacy following oral administration. More recently, nanomaterials have demonstrated significant promise as encapsulation materials to improve probiotic encapsulation. The integration of nanotechnology with microencapsulation techniques can improve the controlled delivery of viable probiotic bacteria to the gut. The current review aims at summarizing the types of nanomaterials used for the microencapsulation of probiotics and showing how they can achieve the delivery and controlled release of probiotics at the site of action.

Thymoquinone, as a Novel Therapeutic Candidate of Cancers

To date, natural products are widely used as pharmaceutical agents for many human diseases and cancers. One of the most popular natural products that have been studied for anticancer properties is thymoquinone (TQ). As a bioactive compound of Nigella sativa, TQ has shown anticancer activities through the inhibition of cell proliferation, migration, and invasion. The anticancer efficacy of TQ is being investigated in several human cancers such as pancreatic cancer, breast cancer, colon cancer, hepatic cancer, cervical cancer, and leukemia. Even though TQ induces apoptosis by regulating the expression of pro- apoptotic and anti-apoptotic genes in many cancers, the TQ effect mechanism on such cancers is not yet fully understood. Therefore, the present review has highlighted the TQ effect mechanisms on several signaling pathways and expression of tumor suppressor genes (TSG). Data from relevant published experimental articles on TQ from 2015 to June 2020 were selected by using Google Scholar and PubMed search engines. The present study investigated the effectiveness of TQ alone or in combination with other anticancer therapeutic agents, such as tyrosine kinase inhibitors on cancers, as a future anticancer therapy nominee by using nanotechnology.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

Biosynthesis and characterization of deuterated chitosan in filamentous fungus and yeast

Deuterated chitosan was produced from the filamentous fungus Rhizopus oryzae, cultivated with deuterated glucose in H₂O medium, without the need for conventional chemical deacetylation. After extraction and purification, the chemical composition and structure were determined by Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and small-angle neutron scattering (SANS). ¹³C NMR experiments provided additional information about the position of the deuterons in the glucoseamine backbone. The NMR spectra indicated that the deuterium incorporation at the non-exchangeable hydrogen positions of the aminoglucopyranosyl ring in the C3 - C5 positions was at least 60-80 %. However, the C2 position was deuterated at a much lower level (6%). Also, SANS showed that the structure of deuterated chitosan was very similar compared to the non-deuterated counterpart. The most abundant radii of the protiated and deuterated chitosan fibers were 54 Å and 60 Å, respectively, but there is a broader distribution of fiber radii in the protiated chitosan sample. The highly deuterated, soluble fungal chitosan described here can be used as a model material for studying chitosan-enzyme complexes for future neutron scattering studies. Because the physical behavior of non-deuterated fungal chitosan mimicked that of shrimp shell chitosan, the methods presented here represent a new approach to producing a high quality deuterated non-animal-derived aminopolysaccharide for studying the structure-function association of biocomposite materials in drug delivery, tissue engineering and other bioactive chitosan-based composites.

Chitosan-Based Nanoparticles Against Viral Infections

Viral infections, in addition to damaging host cells, can compromise the host immune system, leading to frequent relapse or long-term persistence. Viruses have the capacity to destroy the host cell while liberating their own RNA or DNA in order to replicate within additional host cells. The viral life cycle makes it challenging to develop anti-viral drugs. Nanotechnology-based approaches have been suggested to deal effectively with viral diseases, and overcome some limitations of anti-viral drugs. Nanotechnology has enabled scientists to overcome the challenges of solubility and toxicity of anti-viral drugs, and can enhance their selectivity towards viruses and virally infected cells, while preserving healthy host cells. Chitosan is a naturally occurring polymer that has been used to construct nanoparticles (NPs), which are biocompatible, biodegradable, less toxic, easy to prepare, and can function as effective drug delivery systems (DDSs). Furthermore, chitosan is Generally Recognized as Safe (GRAS) by the US Food and Drug Administration (U.S. FDA). Chitosan NPs have been used in drug delivery by the oral, ocular, pulmonary, nasal, mucosal, buccal, or vaginal routes. They have also been studied for gene delivery, vaccine delivery, and advanced cancer therapy. Multiple lines of evidence suggest that chitosan NPs could be used as new therapeutic tools against viral infections. In this review we summarize reports concerning the therapeutic potential of chitosan NPs against various viral infections.

Impact of Foliar Application of Chitosan Dissolved in Different Organic Acids on Isozymes, Protein Patterns and Physio-Biochemical Characteristics of Tomato Grown under Salinity Stress

In this study, the anti-stress capabilities of the foliar application of chitosan, dissolved in four different organic acids (acetic acid, ascorbic acid, citric acid and malic acid) have been investigated on tomato (Solanum lycopersicum L.) plants under salinity stress (100 mM NaCl). Morphological traits, photosynthetic pigments, osmolytes, secondary metabolites, oxidative stress, minerals, antioxidant enzymes activity, isozymes and protein patterns were tested for potential tolerance of tomato plants growing under salinity stress. Salinity stress was caused a reduction in growth parameters, photosynthetic pigments, soluble sugars, soluble proteins and potassium (K⁺) content. However, the contents of proline, ascorbic acid, total phenol, malondialdehyde (MDA), hydrogen peroxide (H₂O₂), sodium (Na⁺) and antioxidant enzyme activity were increased in tomato plants grown under saline conditions. Chitosan treatments in any of the non-stressed plants showed improvements in morphological traits, photosynthetic pigments, osmolytes, total phenol and antioxidant enzymes activity. Besides, the harmful impacts of salinity on tomato plants have also been reduced by lowering MDA, H₂O₂ and Na⁺ levels. Chitosan treatments in either non-stressed or stressed plants showed different responses in number and density of peroxidase (POD), polyphenol oxidase (PPO) and superoxide dismutase (SOD) isozymes. NaCl stress led to the diminishing of protein bands with different molecular weights, while they were produced again in response to chitosan foliar application. These responses were varied according to the type of solvent acid. It could be suggested that foliar application of chitosan, especially that dissolved in ascorbic or citric acid, could be commercially used for the stimulation of tomato plants grown under salinity stress.

Chitosan increases Pinus pinaster tolerance to the pinewood nematode (Bursaphelenchus xylophilus) by promoting plant antioxidative metabolism

The pine wilt disease (PWD), for which no effective treatment is available at the moment, is a constant threat to Pinus spp. plantations worldwide, being responsible for significant economic and environmental losses every year. It has been demonstrated that elicitation with chitosan increases plant tolerance to the pinewood nematode (PWN) Bursaphelenchus xylophilus, the causal agent of the PWD, but the biochemical and genetic aspects underlying this response have not been explored. To understand the influence of chitosan in Pinus pinaster tolerance against PWN, a low-molecular-weight (327 kDa) chitosan was applied to mock- and PWN-inoculated plants. Nematode population, malondialdehyde (MDA), catalase, carotenoids, anthocyanins, phenolic compounds, lignin and gene expression related to oxidative stress (thioredoxin 1, TRX) and plant defence (defensin, DEF, and a-farnesene synthase, AFS), were analysed at 1, 7, 14, 21 and 28 days post-inoculation (dpi). At 28 dpi, PWN-infected plants elicited with chitosan showed a sixfold lower nematode population when compared to non-elicited plants. Higher levels of MDA, catalase, carotenoids, anthocyanins, phenolic compounds, and lignin were detected in chitosan-elicited plants following infection. The expression levels of DEF gene were higher in elicited plants, while TRX and AFS expression was lower, possibly due to the disease containment-effect of chitosan. Combined, we conclude that chitosan induces pine defences against PWD via modulation of metabolic and transcriptomic mechanisms related with plant antioxidant system.

Synthesis of new chitosan Schiff base and its Fe2O3 nanocomposite: Evaluation of methyl orange removal and antibacterial activity

New chitosan Schiff base (3EtO-4OH/Chit) and its 3EtO-4OH/Chit/Fe₂O₃ nanocomposite were synthesized and characterized by FTIR, ¹H NMR, XRD, TGA, DSC and SEM. The result confirmed the preparation of 3EtO-4OH/Chit and its 3EtO-4OH/Chit/Fe₂O₃ nanocomposite. The efficiency of the prepared catalysts was studied for the methyl orange (MO) removal from aqueous solution. The effect of adsorbent dose and contact time on the removal of dye has been studied. Their antibacterial activities were considered against two Gram positive (S. aureus and B. cereus) and two Gram negative (E. coli and P. aeruginosa) bacteria and the results showed that the activity of the 3EtO-4OH/Chit/Fe₂O₃ is excellent and is more than chitosan and 3EtO-4OH/Chit. Thermogravimetry studies shows that the weight loss stages and the residual value at 600 °C are different for the two compounds. DSC curve of the title compounds 3EtO-4OH/Chit and 3EtO-4OH/Chit/Fe₂O₃ is different from each other. The reason for this difference could be due to the presence of iron oxide nanoparticles in 3EtO-4OH/Chit/Fe₂O₃.

Use of combined nanocarrier system based on chitosan nanoparticles and phospholipids complex for improved delivery of ferulic acid

A novel nanocarrier system of phospholipids complex loaded chitosan nanoparticles (FAPLC CNPs) was developed to improve the oral bioavailability and antioxidant potential of FA. FAPLC CNPs were optimized using a Box-Behnken Design (BBD). FAPLC CNPs were characterized using differential scanning calorimetry, Fourier transforms infrared spectroscopy, powder x-ray diffractometry, proton nuclear magnetic resonance, solubility, in vitro dissolution, ex vivo permeation, and in vivo antioxidant activity in carbon tetrachloride (CCl₄)-induced albino rat model. The characterization studies indicated a formation of the complex as well as FAPLC CNPs. The FAPLC CNPs exhibited a lower particle size ~123.27 nm, PDI value ~0.31, and positive zeta potential ~32 mV respectively. Functional characterization studies revealed a significant improvement in the aqueous solubility, dissolution, and permeation rate of FAPLC and FAPLC CNPs compared to FA and FA CNPs. The FAPLC CNPs showed significant enhancement of in vivo antioxidant activity of FA by restoring the elevated marker enzymes in the CCl₄-intoxicated rat model compared to FA CNPs. Moreover, the pharmacokinetic analysis demonstrated a significant enhancement of oral bioavailability of FA from FAPLC CNPs compared to FA CNPs. These findings show that FAPLC CNPs could be used as an effective nanocarrier for improving the oral delivery of FA.