Survival of Enveloped and Non-Enveloped Viruses on Inanimate Surfaces

How long do bacteria, fungi, protozoa, and viruses retain their replication capacity on inanimate surfaces? A systematic review examining environmental resilience versus healthcare-associated infection risk by "fomite-borne risk assessment"

SUMMARYIn healthcare settings, contaminated surfaces play an important role in the transmission of nosocomial pathogens potentially resulting in healthcare-associated infections (HAI). Pathogens can be transmitted directly from frequent hand-touch surfaces close to patients or indirectly by staff and visitors. HAI risk depends on exposure, extent of contamination, infectious dose (ID), virulence, hygiene practices, and patient vulnerability. This review attempts to close a gap in previous reviews on persistence/tenacity by only including articles (n = 171) providing quantitative data on re-cultivable pathogens from fomites for a better translation into clinical settings. We have therefore introduced the new term "replication capacity" (RC). The RC is affected by the degree of contamination, surface material, temperature, relative humidity, protein load, organic soil, UV-light (sunlight) exposure, and pH value. In general, investigations into surface RC are mainly performed in vitro using reference strains with high inocula. In vitro data from studies on 14 Gram-positive, 26 Gram-negative bacteria, 18 fungi, 4 protozoa, and 37 viruses. It should be regarded as a worst-case scenario indicating the upper bounds of risks when using such data for clinical decision-making. Information on RC after surface contamination could be seen as an opportunity to choose the most appropriate infection prevention and control (IPC) strategies. To help with decision-making, pathogens characterized by an increased nosocomial risk for transmission from inanimate surfaces ("fomite-borne") are presented and discussed in this systematic review. Thus, the review offers a theoretical basis to support local risk assessments and IPC recommendations.

Comparative survival of five porcine reproductive and respiratory syndrome virus strains on six fomites

Background and Aim

Despite the availability of vaccines, porcine reproductive and respiratory syndrome virus (PRRSV) continues to cause disease outbreaks in pigs worldwide. One of the reasons for this problem is the frequent mutation of the virus, which creates new variants. This study was conducted to determine the survival of five PRRSV strains on four non-porous and two porous fomites at 22-25°C (room temperature).

Materials and Methods

Five strains of PRRSV (1-7-4, 1-8-4, VR 2332, 1-4-4 MN, and 1-4-4 SD) were used in this study. Circular pieces of aluminum, boot material, polyvinyl chloride, stainless steel, cardboard, and concrete were used as fomites. A small volume of each virus strain was placed on the fomite, followed by incubation at room temperature. The virus surviving at different time points was eluted in an eluent solution. Serial 10-fold dilutions of the eluate were inoculated in MARC-145 cells for virus titration. Multivariate analysis of variance (MANOVA) was used for statistical analysis, and post hoc analysis was used for multiple pairwise comparisons.

Results

Three of the five strains were inactivated within 36 h on non-porous fomites; the remaining two survived for 72 h. On porous fomites, all five strains were inactivated within 12 h. MANOVA at p < 0.05 indicated that the inactivation of strains 1-7-4 and 1-4-4 SD was significant compared with the other strains. In addition, the number of virus titers was significantly reduced on stainless steel compared to other fomites.

Conclusion

Our findings illustrate how the interaction between the PRRSV strain and fomite material affect viral stability over time. The results also provide an understanding of fomites' role in PRRSV epidemiology as indirect transmitters of the virus.

The Growing Phenomenon of 'Frozen' Virus Genome Sequences and Their Likely Origin in Research Facility Escapes

'Frozen' virus genome sequences are sampled from outbreaks and have unusually low sequence divergence when compared to genome sequences from historical strains. A growing number of 'frozen' virus genome sequences are being reported as virus genome sequencing becomes more common. Examples of 'frozen' sequences include the 1977 H1N1 'Russian' flu; Venezuelan Equine Encephalitis Virus from Venezuela and Colombia in 1995; E71 sequences from a Hand, Foot and Mouth outbreak in 2007-2009 in China; and a polio strain isolated in 2014 from Anhui, China. The origin of these 'frozen' sequences has been attributed to escapes from research facilities and often appears to be associated with vaccine work. Consequently, a new paradigm for pathogen emergence appears in operation, that involves laboratory research or vaccine production which utilizes 'live' virus isolates of historical strains. The accidental release and re-emergence of such strains are straightforward to detect from their genome sequences and should spur the routine sequencing and publication of all known pathogenic viral strains undergoing experimentation, or being used for vaccine manufacture, in order to facilitate tracing. However, it is noted that novel pathogenic viruses accidentally released into the population from research facilities are harder to detect if their sequence has first not been made public, which should prompt the routine sequencing and reporting of all novel pathogenic viruses before experimentation.

Chemical inactivation of two non-enveloped viruses results in distinct thermal unfolding patterns and morphological alterations

BACKGROUND

Non-enveloped viruses, which lack a lipid envelope, display higher resistance to disinfectants, soaps and sanitizers compared to enveloped viruses. The capsids of these viruses are highly stable and symmetric protein shells that resist inactivation by commonly employed virucidal agents. This group of viruses include highly transmissible human pathogens such as Rotavirus, Poliovirus, Foot and Mouth Disease Virus, Norovirus and Adenovirus; thus, devising appropriate strategies for chemical disinfection is essential.

RESULTS

In this study, we tested a mild, hypoallergenic combination of a denaturant, alcohol, and organic acid (3.2% citric acid, 1% urea and 70% ethanol, pH4) on two representative non-enveloped viruses - Human Adenovirus 5 (HAdV5) and Feline Calicivirus (FCV)- and evaluated the pathways of capsid neutralization using biophysical methods. The conformational shifts in the capsid upon chemical treatment were studied using Differential Scanning Calorimetry (DSC), while the morphological alterations were visualized concurrently using Transmission Electron Microscopy (TEM). We found that while treatment of purified HAdV5 particles with a formulation resulted in thermal instability and, large scale aggregation; similar treatment of FCV particles resulted in complete collapse of the capsids. Further, while individual components of the formulation caused significant damage to the capsids, a synergistic action of the whole formulation was evident against both non-enveloped viruses tested.

CONCLUSIONS

The distinct effects of the chemical treatment on the morphology of HAdV5 and FCV suggests that non-enveloped viruses with icosahedral geometry can follow different morphological pathways to inactivation. Synergistic effect of whole formulation is more effective compared to individual components. Molecular level understanding of inactivation pathways may result in the design and development of effective mass-market formulations for rapid neutralization of non-enveloped viruses.

Surveillance of norovirus, SARS-CoV-2, and bocavirus in air samples collected from a tertiary care hospital in Thailand

This study aims to determine the presence of norovirus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), and bocavirus in air samples from a tertiary care hospital in Bangkok, Thailand. Air samples were collected in water using the BioSampler and concentrated using speedVac centrifugation. Based on RT-qPCR, norovirus RNA and SARS-CoV-2 RNA were detected in 13/60 (21.7%) and 3/60 (5.0%) of samples, respectively. One air sample had a weak positivity for both norovirus and SARS-CoV-2 RNAs. Detection rate of norovirus genogroup (G) II (13.3%) was higher than norovirus GI (6.7%). One air sample (1.7%) tested positive for GI and GII. The norovirus GI RNA concentration was 6.0 × 102 genome copies/m3. The norovirus GII RNA concentrations ranged from 3.4 × 101 to 5.0 × 103 genome copies/m3. Based on RT-nested PCR, norovirus GII was detected in two (3.3%) samples. All samples tested negative for GI RNA and bocavirus DNA. By phylogenetic analysis, GII.17, which is closely related to the outbreak Kawasaki308/JPN/2015 strain, was found in the RT-nested PCR-positive samples. This study highlights the potential of aerosols for norovirus and SARS-CoV-2 transmission and probably cause gastrointestinal and respiratory illnesses, respectively.

Tree Species-Dependent Inactivation of Coronaviruses and Enteroviruses on Solid Wood Surfaces

The ongoing challenge of viral transmission, exemplified by the Covid pandemic and recurrent viral outbreaks, necessitates the exploration of sustainable antiviral solutions. This study investigates the underexplored antiviral potential of wooden surfaces. We evaluated the antiviral efficacy of various wood types, including coniferous and deciduous trees, against enveloped coronaviruses and nonenveloped enteroviruses like coxsackie virus A9. Our findings revealed excellent antiviral activity manifesting already within 10 to 15 min in Scots pine and Norway spruce, particularly against enveloped viruses. In contrast, other hardwoods displayed varied efficacy, with oak showing effectiveness against the enterovirus. This antiviral activity was consistently observed across a spectrum of humidity levels (20 to 90 RH%), while the antiviral efficacy manifested itself more rapidly at 37 °C vs 21 °C. Key to our findings is the chemical composition of these woods. Resin acids and terpenes were prevalent in pine and spruce, correlating with their antiviral performance, while oak's high phenolic content mirrored its efficacy against enterovirus. The pine surface absorbed a higher fraction of the coronavirus in contrast to oak, whereas enteroviruses were not absorbed on those surfaces. Thermal treatment of wood or mixing wood with plastic, such as in wood-plastic composites, strongly compromised the antiviral functionality of wood materials. This study highlights the role of bioactive chemicals in the antiviral action of wood and opens new avenues for employing wood surfaces as a natural and sustainable barrier against viral transmissions.

Review of factors affecting virus inactivation in aerosols and droplets

The inactivation of viruses in aerosol particles (aerosols) and droplets depends on many factors, but the precise mechanisms of inactivation are not known. The system involves complex physical and biochemical interactions. We reviewed the literature to establish current knowledge about these mechanisms and identify knowledge gaps. We identified 168 relevant papers and grouped results by the following factors: virus type and structure, aerosol or droplet size, temperature, relative humidity (RH) and evaporation, chemical composition of the aerosol or droplet, pH and atmospheric composition. These factors influence the dynamic microenvironment surrounding a virion and thus may affect its inactivation. Results indicate that viruses experience biphasic decay as the carrier aerosols or droplets undergo evaporation and equilibrate with the surrounding air, and their final physical state (liquid, semi-solid or solid) depends on RH. Virus stability, RH and temperature are interrelated, but the effects of RH are multifaceted and still not completely understood. Studies on the impact of pH and atmospheric composition on virus stability have raised new questions that require further exploration. The frequent practice of studying virus inactivation in large droplets and culture media may limit our understanding of inactivation mechanisms that are relevant for transmission, so we encourage the use of particles of physiologically relevant size and composition in future research.

Identification of Mulberrofuran as a potent inhibitor of hepatitis A virus 3Cpro and RdRP enzymes through structure-based virtual screening, dynamics simulation, and DFT studies

Hepatitis is a medical condition characterized by inflammation of the liver. It is commonly caused by the hepatitis viruses A, B, C, D, and E. Hepatitis A virus (HAV) is highly contagious and can spread from infected individuals, through contaminated food, blood, or can also be water-borne. As per the statistics of World Health Organization (WHO), HAV infects about 1.4 million individuals each year globally. In this research work, we have focused on identifying natural product-based potential inhibitors for the two major enzymes of HAV namely 3C proteinase (3Cpro) and RNA-directed RNA polymerase (RdRP). The enzyme 3Cpro plays an important role in proteolytic activity that promotes viral maturation and infectivity. RNA-directed RNA polymerase facilitate viral replication and transcription. Structure-based virtual screening was carried out using NPACT database that contains a collection of 1574 curated plant-derived natural compounds that are validated by experiments. The screening procedure identified the phytochemical Mulberrofuran W, which could bind to both the targets 3Cpro and RdRP. The phytochemical Mulberrofuran W also had better binding affinity compared to the control compounds atropine and pyridinyl ester, which are previously identified inhibitors of HAV 3Cpro and RdRP, respectively. The Mulberrofuran W bound 3Cpro and RdRP complexes were subjected to 200 ns molecular dynamics simulations and were found to be stable and interacting with the active site of the enzymes throughout the course of complex MD simulations. In addition to DFT, MMGBSA studies were also performed to validate the identified potential inhibitor further. The identified phytochemical Mulberrofuran W can be considered as a new potential drug candidate and could be taken up for experimental evaluation against HAV infection.

Common cold viruses circulating in children threaten wild chimpanzees through asymptomatic adult carriers

Reverse zoonotic respiratory diseases threaten great apes across Sub-Saharan Africa. Studies of wild chimpanzees have identified the causative agents of most respiratory disease outbreaks as "common cold" paediatric human pathogens, but reverse zoonotic transmission pathways have remained unclear. Between May 2019 and August 2021, we conducted a prospective cohort study of 234 children aged 3-11 years in communities bordering Kibale National Park, Uganda, and 30 adults who were forest workers and regularly entered the park. We collected 2047 respiratory symptoms surveys to quantify clinical severity and simultaneously collected 1989 nasopharyngeal swabs approximately monthly for multiplex viral diagnostics. Throughout the course of the study, we also collected 445 faecal samples from 55 wild chimpanzees living nearby in Kibale in social groups that have experienced repeated, and sometimes lethal, epidemics of human-origin respiratory viral disease. We characterized respiratory pathogens in each cohort and examined statistical associations between PCR positivity for detected pathogens and potential risk factors. Children exhibited high incidence rates of respiratory infections, whereas incidence rates in adults were far lower. COVID-19 lockdown in 2020-2021 significantly decreased respiratory disease incidence in both people and chimpanzees. Human respiratory infections peaked in June and September, corresponding to when children returned to school. Rhinovirus, which caused a 2013 outbreak that killed 10% of chimpanzees in a Kibale community, was the most prevalent human pathogen throughout the study and the only pathogen present at each monthly sampling, even during COVID-19 lockdown. Rhinovirus was also most likely to be carried asymptomatically by adults. Although we did not detect human respiratory pathogens in the chimpanzees during the cohort study, we detected human metapneumovirus in two chimpanzees from a February 2023 outbreak that were genetically similar to viruses detected in study participants in 2019. Our data suggest that respiratory pathogens circulate in children and that adults become asymptomatically infected during high-transmission times of year. These asymptomatic adults may then unknowingly carry the pathogens into forest and infect chimpanzees. This conclusion, in turn, implies that intervention strategies based on respiratory symptoms in adults are unlikely to be effective for reducing reverse zoonotic transmission of respiratory viruses to chimpanzees.

Laboratory studies on the infectivity of human respiratory viruses: Experimental conditions, detections, and resistance to the atmospheric environment

The environmental stability of infectious viruses in the laboratory setting is crucial to the transmission potential of human respiratory viruses. Different experimental techniques or conditions used in studies over the past decades have led to diverse understandings and predictions for the stability of viral infectivity in the atmospheric environment. In this paper, we review the current knowledge on the effect of simulated atmospheric conditions on the infectivity of respiratory viruses, mainly focusing on influenza viruses and coronaviruses, including severe acute respiratory syndrome coronavirus 2 and Middle East respiratory syndrome coronavirus. First, we summarize the impact of the experimental conditions on viral stability; these involve the methods of viral aerosol generation, storage during aging and collection, the virus types and strains, the suspension matrixes, the initial inoculum volumes and concentrations, and the drying process. Second, we summarize and discuss the detection methods of viral infectivity and their disadvantages. Finally, we integrate the results from the reviewed studies to obtain an overall understanding of the effects of atmospheric environmental conditions on the decay of infectious viruses, especially aerosolized viruses. Overall, this review highlights the knowledge gaps in predicting the ability of viruses to maintain infectivity during airborne transmission.

Household dishwashing detergents efficiently inactivate HSV-1, but not the non-enveloped viruses HAV and MNV, while all viruses were removed from glass by manual scrubbing

This study investigated the stability of herpes simplex virus 1 (HSV-1), hepatitis A virus (HAV) and murine norovirus (MNV) on glass, their inactivation by three household dishwashing detergents and during a glass rinsing process. After drying on glass and storage in darkness, virus titers decreased by 4.7, 5.5 and 4.5 log10 plaque forming units (PFU) in 21, 28 and 14 days for HSV-1, HAV and MNV, respectively. Daylight storage resulted in shorter survival times. While HAV and MNV titers were not significantly affected by 60 s incubation in dishwashing detergents at up to 43 °C, HSV-1 titer decreased significantly by > 4 log10 PFU/mL at the same conditions with each detergent used. After cleaning artificially contaminated drinking glasses with a manual glass scrubbing device, HSV-1, HAV and MNV titers decreased significantly by 4.4 ± 0.1 to 5.3 ± 0.0 log10 PFU. Our study shows, that all tested viruses can remain infectious after drying on glass up to several weeks. Household dishwashing detergents efficiently inactivate the enveloped virus HSV-1, but not the non-enveloped viruses HAV and MNV. The applied manual glass rinsing procedure efficiently removed all three viruses from drinking glasses, probably due to the combination of chemical and mechanical treatments.

Production and characterization of polyhydroxybutyrate bioplastic precursor from Parageobacillus toebii using low-cost substrates and its potential antiviral activity

There is an increasing desire for bioplastics produced from renewable resources as an alternative to their petrochemical counterparts. These biopolymers have long-unnoticed antiviral properties. This study aimed to produce and characterize bioplastics by Parageobacillus toebii using low-cost substrates and determine their antiviral activity against coxsackievirus B4. Seven low-cost substrates (bagasse, water hyacinth, rice straw, rice water, sesame husks, molasses, and corn syrup) were compared with glucose for bioplastic precursor production. The highest bioplastic produced was from water hyacinth and glucose, followed by molasses, rice straw, rice water, sesame husks, and bagasse. Water hyacinth and glucose media were further optimized to increase the bioplastic precursor yield. The optimization of the media leads to increases in bioplastic precursor yields of 1.8-fold (3.456 g/L) and 1.496-fold (2.768 g/L), respectively. These bioplastics were further characterized by thermogravimetric analysis (TGA), Fourier-transformed infrared (FTIR) spectroscopy, proton nuclear magnetic resonance (1H NMR), and gas chromatography-mass spectrometry (GC-MS). They are thermostable, and their characterizations confirm the presence of polyhydroxybutyrate. The antiviral assay showed reasonable antiviral effects for bioplastics from water hyacinth (80.33 %) and glucose (55.47 %) media at 250 μg/mL maximum non-toxic concentrations (MNTC). The present investigation demonstrates a low-cost model for producing polyhydroxybutyrate bioplastic precursor for antiviral applications.

Decay of HCoV-OC43 infectivity is lower in cell debris-containing media than in fresh culture media

In the quantitative description of viral dynamics within cell cultures and, more broadly, in modeling within-host viral infections, a question that commonly arises is whether the degradation of a fraction of the virus could be disregarded in comparison with the massive synthesis of new viral particles. Surprisingly, quantitative data on the synthesis and degradation rates of RNA viruses in cell cultures are scarce. In this study, we investigated the decay of the human betacoronavirus OC43 (HCoV-OC43) infectivity in cell culture lysates and in fresh media. Our findings revealed a significantly slower viral decay rate in the medium containing lysate cells compared to the fresh medium. This observation suggests that the presence of cellular debris from lysed cells may offer protection or stabilize virions, slowing down their degradation. Moreover, the growth rate of HCoV-OC43 infectivity is significantly higher than degradation as long as there are productive cells in the medium, suggesting that, as a first approximation, degradation can be neglected during early infection.

Next-generation biological vector platforms for in vivo delivery of genome editing agents

CRISPR-based genome editing holds promise for addressing genetic disease, infectious disease, and cancer and has rapidly advanced from primary research to clinical trials in recent years. However, the lack of safe and potent in vivo delivery methods for CRISPR components has limited most ongoing clinical trials to ex vivo gene therapy. Effective CRISPR in vivo genome editing necessitates an effective vehicle ensuring target cell transduction while minimizing off-target effects, toxicity, and immune reactions. In this review, we examine promising biological-derived platforms to deliver DNA editing agents in vivo and the engineering thereof, encompassing potent viral-based vehicles, flexible protein nanocages, and mammalian-derived particles.

Antiviral functionalization of cellulose using tannic acid and tannin-rich extracts

Due to seasonally appearing viruses and several outbreaks and present pandemic, we are surrounded by viruses in our everyday life. In order to reduce viral transmission, functionalized surfaces that inactivate viruses are in large demand. Here the endeavor was to functionalize cellulose-based materials with tannic acid (TA) and tannin-rich extracts by using different binding polymers to prevent viral infectivity of both non-enveloped coxsackievirus B3 (CVB3) and enveloped human coronavirus OC43 (HCoV-OC43). Direct antiviral efficacy of TA and spruce bark extract in solution was measured: EC50 for CVB3 was 0.12 and 8.41 μg/ml and for HCoV-OC43, 78.16 and 95.49 μg/ml, respectively. TA also led to an excellent 5.8- to 7-log reduction of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus infectivity. TA functionalized materials reduced infectivity already after 5-min treatment at room temperature. All the tested methods to bind TA showed efficacy on paperboard with 0.1 to 1% (w/v) TA concentrations against CVB3 whereas material hydrophobicity decreased activities. Specific signatures for TA and HCoV-OC43 were discovered by Raman spectroscopy and showed clear co-localization on the material. qPCR study suggested efficient binding of CVB3 to the TA functionalized cellulose whereas HCoV-OC43 was flushed out from the surfaces more readily. In conclusion, the produced TA-materials showed efficient and broadly acting antiviral efficacy. Additionally, the co-localization of TA and HCoV-OC43 and strong binding of CVB3 to the functionalized cellulose demonstrates an interaction with the surfaces. The produced antiviral surfaces thus show promise for future use to increase biosafety and biosecurity by reducing pathogen persistence.

High-volume evacuation mitigates viral aerosol spread in dental procedures

Dental healthcare personnel (DHCP) are subjected to microbe-containing aerosols and splatters in their everyday work. Safer work conditions must be developed to ensure the functioning of the healthcare system. By simulating dental procedures, we aimed to compare the virus-containing aerosol generation of four common dental instruments, and high-volume evacuation (HVE) in their mitigation. Moreover, we combined the detection of infectious viruses with RT-qPCR to form a fuller view of virus-containing aerosol spread in dental procedures. The air-water syringe produced the highest number of aerosols. HVE greatly reduced aerosol concentrations during procedures. The air-water syringe spread infectious virus-containing aerosols throughout the room, while other instruments only did so to close proximity. Additionally, infectious viruses were detected on the face shields of DHCP. Virus genomes were detected throughout the room with all instruments, indicating that more resilient viruses might remain infectious and pose a health hazard. HVE reduced the spread of both infectious viruses and viral genomes, however, it did not fully prevent them. We recommend meticulous use of HVE, a well-fitting mask and face shields in dental procedures. We advise particular caution when operating with the air-water syringe. Due to limited repetitions, this study should be considered a proof-of-concept report.

Low-density hepatitis C virus infectious particles are protected from oxidation by secreted cellular proteins

IMPORTANCE

Assessments of viral stability on surfaces or in body fluids under different environmental conditions and/or temperatures are often performed, as they are key to understanding the routes and parameters of viral transmission and to providing clues on the epidemiology of infections. However, for most viruses, the mechanisms of inactivation vs stability of viral particles remain poorly defined. Although they are structurally diverse, with different compositions, sizes, and shapes, enveloped viruses are generally less stable than non-enveloped viruses, pointing out the role of envelopes themselves in virus lability. In this report, we investigated the properties of hepatitis C virus (HCV) particles with regards to their stability. We found that, compared to alternative enveloped viruses such as Dengue virus (DENV), severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), hepatitis delta virus (HDV), and Crimean-Congo hemorrhagic fever virus (CCHFV) that infect the liver, HCV particles are intrinsically labile. We determined the mechanisms that drastically alter their specific infectivity through oxidation of their lipids, and we highlighted that they are protected from lipid oxidation by secreted cellular proteins, which can protect their membrane fusion capacity and overall infectivity.

Inactivation mechanisms of influenza A virus under pH conditions encountered in aerosol particles as revealed by whole-virus HDX-MS

Multiple respiratory viruses, including influenza A virus (IAV), can be transmitted via expiratory aerosol particles, and aerosol pH was recently identified as a major factor influencing airborne virus infectivity. Indoors, small exhaled aerosols undergo rapid acidification to pH ~4. IAV is known to be sensitive to mildly acidic conditions encountered within host endosomes; however, it is unknown whether the same mechanisms could mediate viral inactivation within the more acidic aerosol micro-environment. Here, we identified that transient exposure to pH 4 caused IAV inactivation by a two-stage process, with an initial sharp decline in infectious titers mainly attributed to premature attainment of the post-fusion conformation of viral protein haemagglutinin (HA). Protein changes were observed by hydrogen-deuterium exchange coupled to mass spectrometry (HDX-MS) as early as 10 s post-exposure to acidic conditions. Our HDX-MS data are in agreement with other more labor-intensive structural analysis techniques, such as X-ray crystallography, highlighting the ease and usefulness of whole-virus HDX-MS for multiplexed protein analyses, even within enveloped viruses such as IAV. Additionally, virion integrity was partially but irreversibly affected by acidic conditions, with a progressive unfolding of the internal matrix protein 1 (M1) that aligned with a more gradual decline in viral infectivity with time. In contrast, no acid-mediated changes to the genome or lipid envelope were detected. Improved understanding of respiratory virus fate within exhaled aerosols constitutes a global public health priority, and information gained here could aid the development of novel strategies to control the airborne persistence of seasonal and/or pandemic influenza in the future. IMPORTANCE It is well established that COVID-19, influenza, and many other respiratory diseases can be transmitted by the inhalation of aerosolized viruses. Many studies have shown that the survival time of these airborne viruses is limited, but it remains an open question as to what drives their infectivity loss. Here, we address this question for influenza A virus by investigating structural protein changes incurred by the virus under conditions relevant to respiratory aerosol particles. From prior work, we know that expelled aerosols can become highly acidic due to equilibration with indoor room air, and our results indicate that two viral proteins are affected by these acidic conditions at multiple sites, leading to virus inactivation. Our findings suggest that the development of air treatments to quicken the speed of aerosol acidification would be a major strategy to control infectious bioburdens in the air.

The possibility of spreading herpes simplex virus type 1 via food handling and sharing

AIMS

Herpes simplex virus type 1 (HSV-1) is an enveloped virus that causes recurrent and incurable diseases in 67% of the world population. Although it is not listed as a foodborne virus, some studies have shown that it can be recovered from surfaces as well as food.

METHODS AND RESULTS

We investigated its persistence at -20°C, 4°C, 20°C, or 37°C for up to 7 days on stainless steel, aluminum, glass, polypropylene, cheddar cheese, sliced almond, and apple skin and in cola soft drink, orange juice, coffee, and milk, as well as its transferability from stainless steel to dry or moistened nitrile or latex gloves over time at typical ambient temperatures. Based on the plaque assay on Vero cells, HSV-1 persisted at least 24 h on all surfaces and at least 1 h on food matrices but was inactivated quickly in cola soft drink. Temperature and pH affected HSV-1 infectivity. Transfer of HSV-1 at a contact pressure of 1 kg cm2-1 for 10 s occurred only on latex, especially moistened.

CONCLUSIONS

Our data on the persistence of HSV-1 on food-related surfaces suggest that some risk may be associated with sharing foods with infected carriers.

Occurrence of Human Viruses on Fomites in the Environment: A Systematic Review and Meta-analysis

Documenting the occurrence of viruses on fomites is crucial in determining the significance of fomite-mediated transmission and the potential use of fomites for environmental disease surveillance. We conducted a systematic review and meta-analysis to compile information on the occurrence of human viruses on fomites in the environment; we identified 134 peer-reviewed papers. We compiled sampling and measurement methods, results, quality control information, and whether virus data were compared with community health data from the papers. We conducted univariate and multivariate analyses to investigate if presence of virus on fomites was associated with virus type (enveloped, nonenveloped), sampling location (healthcare setting, nonhealthcare temporary setting, nonhealthcare nontemporary setting), and area of fomite swabbed (<50, 50-100, >100 cm2). Across 275 data sets from the 134 papers, there was the most data available for Coronaviridae and from fomites at hospitals. Positivity rates, defined as the percent positive fomite samples, were low (median = 6%). Data were available on viruses from 16 different viral families, but data on viruses from 9 families had few (n < 5) data sets. Many human virus families were not identified in this review (11 families). Less than 15% of the data sets reported virus concentrations in externally valid units (viruses per area of surface), and 16% provided a quantitative comparison between virus and health data. Virus type and area swabbed were significant predictors of virus presence on fomites, and the positivity rate of data sets collected from healthcare settings and nonhealthcare nontemporary settings (e.g., individual housing) were significantly higher than those collected in nonhealthcare temporary settings (e.g., restaurants). Data from this review indicates that viruses may be present on fomites, that fomite-mediated virus transmission may occur, and that fomites may provide information on circulation of infectious diseases in the community. However, more quantitative data on diverse viruses are needed, and method reporting needs significant improvements.

The role of mucosal barriers in disease progression and transmission

Mucus is a biological hydrogel that coats and protects all non-keratinized wet epithelial surfaces. Mucins, the primary structural components of mucus, are critical components of the gel layer that protect against invading pathogens. For communicable diseases, pathogen-mucin interactions contribute to the pathogen's fate and the potential for disease progression in-host, as well as the potential for onward transmission. We begin by reviewing in-host mucus filtering mechanisms, including size filtering and interaction filtering, which regulate the permeability of mucus barriers to all molecules including pathogens. Next, we discuss the role of mucins in communicable diseases at the point of transmission (i.e. how the encapsulation of pathogens in emitted mucosal droplets externally to hosts may modulate pathogen infectivity and viability). Overall, mucosal barriers modulate both host susceptibility as well as the dynamics of population-level disease transmission. The study of mucins and their use in models and experimental systems are therefore crucial for understanding the mechanistic biophysical principles underlying disease transmission and the early stages of host infection.

Environmental Stability and Transmissibility of Enveloped Viruses at Varied Animate and Inanimate Interfaces

Enveloped viruses have been the leading causative agents of viral epidemics in the past decade, including the ongoing coronavirus disease 2019 outbreak. In epidemics caused by enveloped viruses, direct contact is a common route of infection, while indirect transmissions through the environment also contribute to the spread of the disease, although their significance remains controversial. Bridging the knowledge gap regarding the influence of interfacial interactions on the persistence of enveloped viruses in the environment reveals the transmission mechanisms when the virus undergoes mutations and prevents excessive disinfection during viral epidemics. Herein, from the perspective of the driving force, partition efficiency, and viral survivability at interfaces, we summarize the viral and environmental characteristics that affect the environmental transmission of viruses. We expect to provide insights for virus detection, environmental surveillance, and disinfection to limit the spread of severe acute respiratory syndrome coronavirus 2.

Trends on Human Norovirus Virus-like Particles (HuNoV-VLPs) and Strategies for the Construction of Infectious Viral Clones toward In Vitro Replication

Most acute gastroenteritis (AGE) outbreaks and sporadic cases in developing countries are attributable to infection by human norovirus (HuNoV), the enteric virus mainly transmitted via fecal-contaminated water. However, it has been challenging to study HuNoV due to the lack of suitable systems to cultivate and replicate the virus, hindering the development of treatments and vaccines. Researchers have been using virus-like particles (VLPs) and infectious viral clones to overcome this challenge as alternatives to fresh virus isolates in various in vitro and ex vivo models. VLPs are multiprotein structures that mimic the wild-type virus but cannot replicate in host cells due to the lack of genetic materials for replication, limiting downstream analysis of the virus life cycle and pathogenesis. The development of in vitro cloning systems has shown promise for HuNoV replication studies. This review discusses the approaches for constructing HuNoV-VLPs and infectious viral clones, the techniques involved, and the challenges faced. It also highlights the relationship between viral genes and their protein products and provides a perspective on technical considerations for producing efficient HuNoV-VLPs and infectious viral clones, which could substitute for native human noroviruses in future studies.

Changes in hospitalizations and emergency department respiratory viral diagnosis trends before and during the COVID-19 pandemic in Ontario, Canada

INTRODUCTION

Population-level surveillance systems have demonstrated reduced transmission of non-SARS-CoV-2 respiratory viruses during the COVID-19 pandemic. In this study, we examined whether this reduction translated to reduced hospital admissions and emergency department (ED) visits associated with influenza, respiratory syncytial virus (RSV), human metapneumovirus, human parainfluenza virus, adenovirus, rhinovirus/enterovirus, and common cold coronavirus in Ontario.

METHODS

Hospital admissions were identified from the Discharge Abstract Database and exclude elective surgical admissions and non-emergency medical admissions (January 2017-March 2022). Emergency department (ED) visits were identified from the National Ambulatory Care Reporting System. International Classification of Diseases (ICD-10) codes were used to classify hospital visits by virus type (January 2017-May 2022).

RESULTS

At the onset of the COVID-19 pandemic, hospitalizations for all viruses were reduced to near-trough levels. Hospitalizations and ED visits for influenza (9,127/year and 23,061/year, respectively) were nearly absent throughout the pandemic (two influenza seasons; April 2020-March 2022). Hospitalizations and ED visits for RSV (3,765/year and 736/year, respectively) were absent for the first RSV season during the pandemic, but returned for the 2021/2022 season. This resurgence of hospitalizations for RSV occurred earlier in the season than expected, was more likely among younger infants (age ≤6 months), more likely among older children (aged 6.1-24 months), and less likely to comprise of patients residing in higher areas of ethnic diversity (p<0.0001).

CONCLUSION

During the COVID-19 pandemic, there was a reduced the burden of other respiratory infections on patients and hospitals. The epidemiology of respiratory viruses in the 2022/23 season remains to be seen.

A Natural Virucidal and Microbicidal Spray Based on Polyphenol-Iron Sols

Numerous disinfection methods have been developed to reduce the transmission of infectious diseases that threaten human health. However, it still remains elusively challenging to develop eco-friendly and cost-effective methods that deactivate a wide range of pathogens, from viruses to bacteria and fungi, without doing any harm to humans or the environment. Herein we report a natural spraying protocol, based on a water-dispersible supramolecular sol of nature-derived tannic acid (TA) and Fe3+, which is easy-to-use and low-cost. Our formulation effectively deactivates viruses (influenza A viruses, SARS-CoV-2, and human rhinovirus) as well as suppressing the growth and spread of pathogenic bacteria (Escherichia coli, Salmonella typhimurium, Staphylococcus aureus, and Acinetobacter baumannii) and fungi (Pleurotus ostreatus and Trichophyton rubrum). Its versatile applicability in a real-life setting is also demonstrated against microorganisms present on the surfaces of common household items (e.g., air filter membranes, disposable face masks, kitchen sinks, mobile phones, refrigerators, and toilet seats).

Epidemiology of Respiratory Infections during the COVID-19 Pandemic

To face the COVID-19 outbreak, a wide range of non-pharmaceutical interventions (NPIs) aimed at limiting the spread of the virus in communities, such as mask-wearing, hand hygiene, social distancing, travel restrictions, and school closures, were introduced in most countries. Thereafter, a significant reduction of new asymptomatic and symptomatic COVID-19 cases occurred, although there were differences between countries according to the type and duration of the NPIs. In addition, the COVID-19 pandemic has been accompanied by significant variations in the global incidence of diseases due to the most common non-SARS-CoV-2 respiratory viruses and some bacteria. In this narrative review, the epidemiology of the most common non-SARS-CoV-2 respiratory infections during the COVID-19 pandemic is detailed. Moreover, factors that could have had a role in modifying the traditional circulation of respiratory pathogens are discussed. A literature analysis shows that NPIs were the most important cause of the general reduction in the incidence of influenza and respiratory syncytial virus infection in the first year of the pandemic, although the different sensitivity of each virus to NPIs, the type and duration of measures used, as well as the interference among viruses may have played a role in modulating viral circulation. Reasons for the increase in the incidences of Streptococcus pneumoniae and group A Streptococcus infections seem strictly linked to immunity debt and the role played by NPIs in reducing viral infections and limiting bacterial superimposed infections. These results highlight the importance of NPIs during pandemics, the need to monitor the circulation of infectious agents that cause diseases similar to those caused by pandemic agents, and the need to make efforts to improve coverage with available vaccines.

Viral Vectors, Exosomes, and Vexosomes: Potential Armamentarium for Delivering CRISPR/Cas to Cancer Cells

The underlying cause of cancer is genetic disruption, so gene editing technologies, particularly CRISPR/Cas systems can be used to go against cancer. The field of gene therapy has undergone many transitions over its 40-year history. Despite its many successes, it has also suffered many failures in the battle against malignancies, causing really adverse effects instead of therapeutic outcomes. At the tip of this double-edged sword are viral and non-viral-based vectors, which have profoundly transformed the way scientists and clinicians develop therapeutic platforms. Viruses such as lentivirus, adenovirus, and adeno-associated viruses are the most common viral vectors used for delivering the CRISPR/Cas system into human cells. In addition, among non-viral vectors, exosomes, especially tumor-derived exosomes (TDEs), have proven to be quite effective at delivering this gene editing tool. The combined use of viral vectors and exosomes, called vexosomes, seems to be a solution to overcoming the obstacles of both delivery systems.

Enveloped and non-enveloped virus survival on microfiber towels

Background

Handwashing is an important intervention which can reduce indirect disease transmission, however soap and water for handwashing purposes is not available in some low-resource regions. When handwashing with soap and water is not possible, individuals may use alternatives such as the Supertowel (a microfiber towel with an antimicrobial coating). Testing of viral inactivation as a result of antimicrobial treatment on the Supertowel, however, has been limited. The goal of this study is to provide information about the performance of the Supertowel's antimicrobial treatment against viruses, which will help inform the use of the towels as handwashing alternatives.

Methods

We seeded the Supertowel and a regular microfiber towel with two bacteriophages (enveloped Phi6 and non-enveloped MS2) and monitored viral inactivation over time. Additionally, we assessed if temperature, humidity, whether the towel was initially wet or dry, or virus type had an effect on viral decay rate constants. Virus concentrations were measured repeatedly over 24 h.

Results

We found that neither towel type (whether the towel was a Supertowel or a regular microfiber towel) nor humidity were significant variables in our model of decay rate constants (P = 0.06 and P = 0.22, respectively). We found that the variables of temperature, whether towels were initially wet versus dry, and virus type were significantly different from 0, suggesting that these variables explained variance in the decay rate constant (P = 6.55 × 10-13, P = 0.001, and P < 2 × 10-16, respectively). Higher temperatures, dry towels, and enveloped viruses all resulted in increases in the decay rate constant.

Conclusions

Viruses seeded onto a Supertowel decay similar to viruses seeded onto a regular towel indicating that the virucidal potential of the Supertowel is minimal.

Antiviral Activity of Active Materials: Standard and Finger-Pad-Based Innovative Experimental Approaches

Environmental surfaces, including high-touch surfaces (HITS), bear a high risk of becoming fomites and can participate in viral dissemination through contact and transmission to other persons, due to the capacity of viruses to persist on such contaminated surface before being transferred to hands or other supports at sufficient concentration to initiate infection through direct contact. Interest in the development of self-decontaminating materials as additional safety measures towards preventing viral infectious disease transmission has been growing. Active materials are expected to reduce the viral charge on surfaces over time and consequently limit viral transmission capacity through direct contact. In this study, we compared antiviral activities obtained using three different experimental procedures by assessing the survival of an enveloped virus (influenza virus) and non-enveloped virus (feline calicivirus) over time on a reference surface and three active materials. Our data show that experimental test conditions can have a substantial impact of over 1 log₁₀ on the antiviral activity of active material for the same contact period, depending on the nature of the virus. We then developed an innovative and reproducible approach based on finger-pad transfer to evaluate the antiviral activity of HITS against a murine norovirus inoculum under conditions closely reflecting real-life surface exposure.

Out of the 'host' box: extreme off-host conditions alter the infectivity and virulence of a parasitic bacterium

Disease agents play an important role in the ecology and life history of wild and cultivated populations and communities. While most studies focus on the adaptation of parasites to their hosts, the adaptation of free-living parasite stages to their external (off-host) environment may tell us a lot about the factors that shape the distribution of parasites. Pasteuria ramosa is an endoparasitic bacterium of the water flea Daphnia with a wide geographical distribution. Its transmission stages rest outside of the host and thus experience varying environmental regimes. We examined the life history of P. ramosa populations from four environmental conditions (i.e. groups of habitats): the factorial combinations of summer-dry water bodies or not, and winter-freeze water bodies or not. Our goal was to examine how the combination of winter temperature and summer dryness affects the parasite's ability to attach to its host and to infect it. We subjected samples of the four groups of habitats to temperatures of 20, 33, 46 and 60°C in dry and wet conditions, and exposed a susceptible clone of Daphnia magna to the treated spores. We found that spores which had undergone desiccation endured higher temperatures better than spores kept wet, both regarding attachment and subsequent infection. Furthermore, spores treated with heightened temperatures were much less infective and virulent. Even under high temperatures (60°C), exposed spores from all populations were able to attach to the host cuticle, albeit they were unable to establish infection. Our work highlights the sensitivity of a host-free resting stage of a bacterial parasite to the external environment. Long heatwaves and harsh summers, which are becoming more frequent owing to recent climate changes, may therefore pose a problem for parasite survival. This article is part of the theme issue 'Infectious disease ecology and evolution in a changing world'.

Viral vectors and extracellular vesicles: innate delivery systems utilized in CRISPR/Cas-mediated cancer therapy

Gene editing-based therapeutic strategies grant the power to override cell machinery and alter faulty genes contributing to disease development like cancer. Nowadays, the principal tool for gene editing is the clustered regularly interspaced short palindromic repeats-associated nuclease 9 (CRISPR/Cas9) system. In order to bring this gene-editing system from the bench to the bedside, a significant hurdle remains, and that is the delivery of CRISPR/Cas to various target cells in vivo and in vitro. The CRISPR-Cas system can be delivered into mammalian cells using various strategies; among all, we have reviewed recent research around two natural gene delivery systems that have been proven to be compatible with human cells. Herein, we have discussed the advantages and limitations of viral vectors, and extracellular vesicles (EVs) in delivering the CRISPR/Cas system for cancer therapy purposes.

Anogenital HSV in Children: Should Providers Be Concerned for Sexual Abuse?

OBJECTIVE

Anogenital herpes simplex virus (HSV) is most commonly acquired via sexual transmission, although other nonsexual modes of transmission have been proposed. When a child presents with a first-time outbreak of anogenital HSV, providers must consider sexual abuse. There are currently no evidence-based consensus guidelines to inform management of these patients. The purpose of this study was to describe how child abuse pediatricians (CAPs) evaluate children with anogenital HSV infection and determine whether any consistent practice patterns are followed.

PARTICIPANTS AND SETTING

The patients included in this study were children between the ages of 0 and 12 years with a first-time outbreak of anogenital HSV who were medically evaluated by a CAP.

METHODS

Patient charts were retroactively reviewed for the period of January 1 2004 to May 1 2020.

RESULTS

Twenty-two cases were referred for evaluation by a CAP in the chosen time frame. Fifteen were seen in person. Ten of these patients were interviewed, 15 had an anogenital exam with colposcopy, and 14 were tested for at least one other sexually transmitted infection. A diagnosis of sexual abuse was made for 1 patient.

CONCLUSION

This study demonstrates that although nonsexual transmission of anogenital HSV may be possible, providers must still consider sexual abuse. Children with a first-time outbreak of anogenital HSV should have a comprehensive evaluation for sexual abuse, including interview, physical exam, and testing for sexually transmitted infections. Evidence-based concerns for sexual abuse should be reported to child protective services.

Antimicrobial and Virucidal Potential of Morpholinium-Based Ionic Liquids

Witnessed by the ongoing spread of antimicrobial resistant bacteria as well as the recent global pandemic of the SARS-CoV-2 virus, the development of new disinfection strategies is of great importance, and novel substance classes as effective antimicrobials and virucides are urgently needed. Ionic liquids (ILs), low-melting salts, have been already recognized as efficient antimicrobial agents with prospects for antiviral potential. In this study, we examined the antiviral activity of 12 morpholinium based herbicidal ionic liquids with a tripartite test system, including enzyme inhibition tests, virucidal activity determination against five model viruses and activity against five bacterial species. The antimicrobial and enzymatic tests confirmed that the inhibiting activity of ILs corresponds with the number of long alkyl side chains and that [Dec₂Mor]⁺ based ILs are promising candidates as novel antimicrobials. The virucidal tests showed that ILs antiviral activity depends on the type and structure of the virus, revealing enveloped Phi6 phage as highly susceptible to the ILs action, while the non-enveloped phages PRD1 and MS2 proved completely resistant to ionic liquids. Furthermore, a comparison of results obtained for P100 and P001 phages demonstrated for the first time that the susceptibility of viruses to ionic liquids can be dependent on differences in the phage tail structure.

Combating coxsackievirus B infections

Coxsackieviruses B (CVB) are small, non-enveloped, single-stranded RNA viruses belonging to the Enterovirus genus of the Picornaviridae family. They are common worldwide and cause a wide variety of human diseases ranging from those having relatively mild symptoms to severe acute and chronic pathologies such as cardiomyopathy and type 1 diabetes. The development of safe and effective strategies to combat these viruses remains a challenge. The present review outlines current approaches to control CVB infections and associated diseases. Various drugs targeting viral or host proteins involved in viral replication as well as vaccines have been developed and shown potential to prevent or combat CVB infections in vitro and in vivo in animal models. Repurposed drugs and alternative strategies targeting miRNAs or based on plant extracts and probiotics and their derivatives have also shown antiviral effects against CVB. In addition, clinical trials with vaccines and drugs are underway and offer hope for the prevention or treatment of CVB-induced diseases.

The Potential Antiviral Effects of Selenium Nanoparticles and Coated Surfaces

Modern epidemics quickly spread across borders and continents with devastating effects on both human health and the world economy. This issue is made worse by the various ways that infections are spread, including through aerosol, droplets, and fomites. The antibacterial qualities of various surface materials and coatings have been the subject of much research. However, the antiviral activity of metal coatings can be heavily influenced by imbalances in metal distribution and the presence of other metal impurities. As such, there is interest in developing novel surface coatings that can reduce the transmission of active viral particles in healthcare facilities. In recent years, the non-metals, such as selenium and nanoparticles, have acquired greater interest from the medical and scientific community for their antiviral surface activity. In this review, we will discuss the cellular and physiological functions of selenium in mammalian cells and against viral infections. We then discuss the mechanism behind selenium coated surfaces and their efficacy against bacterial infections. Lastly, we examine the antiviral activity of selenium, and the potential antiviral activity of selenium nanoparticles and coatings.

Lignin: A Sustainable Antiviral Coating Material

Transmission of viruses through contact with contaminated surfaces is an important pathway for the spread of infections. Antiviral surface coatings are useful to minimize such risks. Current state-of-the-art approaches toward antiviral surface coatings either involve metal-based materials or complex synthetic polymers. These approaches, however, even if successful, will have to face great challenges when it comes to large-scale applications and their environmental sustainability. Here, an antiviral surface coating was prepared by spin-coating lignin, a natural biomass residue of the paper production industry. We show effective inactivation of herpes simplex virus type 2 (>99% after 30 min) on a surface coating that is low-cost and environmentally sustainable. The antiviral mechanism of the lignin surface was investigated and is attributed to reactive oxygen species generated upon oxidation of lignin phenols. This mechanism does not consume the surface coating (as opposed to the release of a specific antiviral agent) and does not require regeneration. The coating is stable in ambient conditions, as demonstrated in a 6 month aging study that did not reveal any decrease in antiviral activity. This research suggests that natural compounds may be used for the development of affordable and sustainable antiviral coatings.

Amine-Functionalized Silver Nanoparticles: A Potential Antiviral-Coating Material with Trap and Kill Efficiency to Combat Viral Dissemination (COVID-19)

The outbreak of COVID-19 has drastically affected the daily lifestyles of people globally where specific Coronavirus-2 transmits primarily by respiratory droplets. Structurally, the SARS-CoV-2 virus is made up of four types of proteins in which S-protein is indispensable among them, as it causes rapid replication in the host body. Therefore, the glycine and alanine composed of HR1 of S-protein is the ideal target for antiviral action. Different forms of surface-active PPEs can efficiently prevent this transmission in this circumstance. However, the virus can survive on the conventional PPEs for a long time. Hence, the nanotechnological approaches based on engineered nanomaterials coating on medical equipments can potentially prevent the dissemination of infections in public. Silver nanoparticles with tuneable physicochemical properties and versatile chemical functionalization provide an excellent platform to combat the disease. The coating of amine-functionalized silver nanoparticle (especially amine linked to aliphatic chain and trialkoxysilane) in its nanostructured form enables cloths trap and kill efficient. PPEs are a primary and reliable preventive measure, although they are not 100% effective against viral infections. So, developing and commercializing surface-active PPEs with trap and kill efficacy is highly needed to cope with current and future viral infections. This review article discusses the COVID-19 morphology, antiviral mechanism of Ag-NPs against SARS-CoV-2 virus, surface factors that influence viral persistence on fomites, the necessity of antiviral PPEs, and the potential application of amine-functionalized silver nanoparticles as a coating material for the development of trap and kill-efficient face masks and PPE kits.

SARS-CoV-2 indoor environment contamination with epidemiological and experimental investigations

SARS-CoV-2 has been detected both in air and on surfaces, but questions remain about the patient-specific and environmental factors affecting virus transmission. Additionally, more detailed information on viral sampling of the air is needed. This prospective cohort study (N = 56) presents results from 258 air and 252 surface samples from the surroundings of 23 hospitalized and eight home-treated COVID-19 index patients between July 2020 and March 2021 and compares the results between the measured environments and patient factors. Additionally, epidemiological and experimental investigations were performed. The proportions of qRT-PCR-positive air (10.7% hospital/17.6% homes) and surface samples (8.8%/12.9%) showed statistical similarity in hospital and homes. Significant SARS-CoV-2 air contamination was observed in a large (655.25 m³ ) mechanically ventilated (1.67 air changes per hour, 32.4-421 L/s/patient) patient hall even with only two patients present. All positive air samples were obtained in the absence of aerosol-generating procedures. In four cases, positive environmental samples were detected after the patients had developed a neutralizing IgG response. SARS-CoV-2 RNA was detected in the following particle sizes: 0.65-4.7 μm, 7.0-12.0 μm, >10 μm, and <100 μm. Appropriate infection control against airborne and surface transmission routes is needed in both environments, even after antibody production has begun.

Assessment of two types of passive sampler for the efficient recovery of SARS-CoV-2 and other viruses from wastewater

Wastewater-based epidemiology (WBE) has proven to be a useful surveillance tool during the ongoing SARS-CoV-2 pandemic, and has driven research into evaluating the most reliable and cost-effective techniques for obtaining a representative sample of wastewater. When liquid samples cannot be taken efficiently, passive sampling approaches have been used, however, insufficient data exists on their usefulness for multi-virus capture and recovery. In this study, we compared the virus-binding capacity of two passive samplers (cotton-based tampons and ion exchange filter papers) in two different water types (deionised water and wastewater). Here we focused on the capture of wastewater-associated viruses including Influenza A and B (Flu-A & B), SARS-CoV-2, human adenovirus (AdV), norovirus GII (NoVGII), measles virus (MeV), pepper mild mottle virus (PMMoV), the faecal marker crAssphage and the process control virus Pseudomonas virus phi6. After deployment, we evaluated four different methods to recover viruses from the passive samplers namely, (i) phosphate buffered saline (PBS) elution followed by polyethylene glycol (PEG) precipitation, (ii) beef extract (BE) elution followed by PEG precipitation, (iii) no-elution into PEG precipitation, and (iv) direct extraction. We found that the tampon-based passive samplers had higher viral recoveries in comparison to the filter paper. Overall, the preferred viral recovery method from the tampon passive samplers was the no-elution/PEG precipitation method. Furthermore, we evidenced that non-enveloped viruses had higher percent recoveries from the passive samplers than enveloped viruses. This is the first study of its kind to assess passive sampler and viral recovery methods amongst a plethora of viruses commonly found in wastewater or used as a viral surrogate in wastewater studies.

Efficacy of washing produce in removing human coronavirus OC43 and murine norovirus

AIMS

Fresh produce is often a vehicle for the transmission of foodborne pathogens such as human norovirus. Thus, it is recommended to wash the surface of produce before consumption, and one of the most common ways to wash produce is by rinsing under running tap water. This study determined the effectiveness of removal of human coronavirus-OC43 (HCoV-OC43), as a surrogate for severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) and murine norovirus-1 (MNV-1), as a surrogate for human norovirus, from contaminated lettuce, apples and cucumbers.

METHODS AND RESULTS

The produce surfaces were artificially inoculated in conjunction with faecal material to represent natural contamination. Rinsing under tap water for 10 s at 40 ml/s removed 1.94 ± 0.44, 1.42 ± 0.00 and 1.42 ± 0.42 log of HCoV-OC43 from apple, cucumber and lettuce respectively. The same washing technique removed 1.77 ± 0.17, 1.42 ± 0.07 and 1.79 ± 0.14 log of MNV-1 from apple, cucumber and lettuce respectively. This washing technique was effective at reducing a significant amount of viral contamination, however, it was not enough to eliminate the entire contamination. There was no significant difference in the reduction of viral load between the two viruses, nor between the three surfaces tested in this study.

CONCLUSIONS

Our data suggest that washing under tap water would be an efficient way of reducing the risk of foodborne viral transmission only if the level of contamination is less than 2 log PFU.

SIGNIFICANCE AND IMPACT OF STUDY

This study demonstrates that running tap water was effective at reducing the amount of infectious HCoV-OC43 and MNV on produce surfaces, and washing produce continues to be an important task to perform prior to consumption to avoid infection by foodborne viruses, particularly for foods which are eaten raw.

Aerosolized Hydrogen Peroxide Decontamination of N95 Respirators, with Fit-Testing and Viral Inactivation, Demonstrates Feasibility for Reuse during the COVID-19 Pandemic

In response to the demand for N95 respirators by health care workers during the COVID-19 pandemic, we evaluated decontamination of N95 respirators using an aerosolized hydrogen peroxide (aHP) system. This system is designed to dispense a consistent atomized spray of aerosolized, 7% hydrogen peroxide (H₂O₂) solution over a treatment cycle. Multiple N95 respirator models were subjected to 10 or more cycles of respirator decontamination, with a select number periodically assessed for qualitative and quantitative fit testing. In parallel, we assessed the ability of aHP treatment to inactivate multiple viruses absorbed onto respirators, including phi6 bacteriophage, herpes simplex virus 1 (HSV-1), coxsackievirus B3 (CVB3), and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). For pathogens transmitted via respiratory droplets and aerosols, it is critical to address respirator safety for reuse. This study provided experimental validation of an aHP treatment process that decontaminates the respirators while maintaining N95 function. External National Institute for Occupational Safety & Health (NIOSH) certification verified respirator structural integrity and filtration efficiency after 10 rounds of aHP treatment. Virus inactivation by aHP was comparable to the decontamination of commercial spore-based biological indicators. These data demonstrate that the aHP process is effective, with successful fit-testing of respirators after multiple aHP cycles, effective decontamination of multiple virus species, including SARS-CoV-2, successful decontamination of bacterial spores, and filtration efficiency maintained at or greater than 95%. While this study did not include extended or clinical use of N95 respirators between aHP cycles, these data provide proof of concept for aHP decontamination of N95 respirators before reuse in a crisis-capacity scenario.

IMPORTANCE The COVID-19 pandemic led to unprecedented pressure on health care and research facilities to provide personal protective equipment. The respiratory nature of the SARS-CoV2 pathogen makes respirator facepieces a critical protective measure to limit inhalation of this virus. While respirator facepieces were designed for single use and disposal, the pandemic increased overall demand for N95 respirators, and corresponding manufacturing and supply chain limitations necessitated the safe reuse of respirators when necessary. In this study, we repurposed an aerosolized hydrogen peroxide (aHP) system that is regularly utilized to decontaminate materials in a biosafety level 3 (BSL3) facility, to develop a method for decontamination of N95 respirators. Results from viral inactivation, biological indicators, respirator fit testing, and filtration efficiency testing all indicated that the process was effective at rendering N95 respirators safe for reuse. This proof-of-concept study establishes baseline data for future testing of aHP in crisis-capacity respirator-reuse scenarios.

Synanthropic Flies-A Review Including How They Obtain Nutrients, along with Pathogens, Store Them in the Crop and Mechanisms of Transmission

An attempt has been made to provide a broad review of synanthropic flies and, not just a survey of their involvement in human pathogen transmission. It also emphasizes that the crop organ of calliphorids, sarcophagids, and muscids was an evolutionary development and has served and assisted non-blood feeding flies in obtaining food, as well as pathogens, prior to the origin of humans. Insects are believed to be present on earth about 400 million years ago (MYA). Thus, prior to the origin of primates, there was adequate time for these flies to become associated with various animals and to serve as important transmitters of pathogens associated with them prior to the advent of early hominids and modern humans. Through the process of fly crop regurgitation, numerous pathogens are still readily being made available to primates and other animals. Several studies using invertebrate-derived DNA = iDNA meta-techniques have been able to identify, not only the source the fly had fed on, but also if it had fed on their feces or the animal's body fluids. Since these flies are known to feed on both vertebrate fluids (i.e., from wounds, saliva, mucus, or tears), as well as those of other animals, and their feces, identification of the reservoir host, amplification hosts, and associated pathogens is essential in identifying emerging infectious diseases. New molecular tools, along with a focus on the crop, and what is in it, should provide a better understanding and development of whether these flies are involved in emerging infectious diseases. If so, epidemiological models in the future might be better at predicting future epidemics or pandemics.

SARS-CoV-2 air sampling: A systematic review on the methodologies for detection and infectivity

This systematic review aims to present an overview of the current aerosol sampling methods (and equipment) being used to investigate the presence of SARS-CoV-2 in the air, along with the main parameters reported in the studies that are essential to analyze the advantages and disadvantages of each method and perspectives for future research regarding this mode of transmission. A systematic literature review was performed on PubMed/MEDLINE, Web of Science, and Scopus to assess the current air sampling methodologies being applied to SARS-CoV-2. Most of the studies took place in indoor environments and healthcare settings and included air and environmental sampling. The collection mechanisms used were impinger, cyclone, impactor, filters, water-based condensation, and passive sampling. Most of the reviewed studies used RT-PCR to test the presence of SARS-CoV-2 RNA in the collected samples. SARS-CoV-2 RNA was detected with all collection mechanisms. From the studies detecting the presence of SARS-CoV-2 RNA, fourteen assessed infectivity. Five studies detected viable viruses using impactor, water-based condensation, and cyclone collection mechanisms. There is a need for a standardized protocol for sampling SARS-CoV-2 in air, which should also account for other influencing parameters, including air exchange ratio in the room sampled, relative humidity, temperature, and lighting conditions.

Environmental Stability of Enveloped Viruses is Impacted by the Initial Volume and Evaporation Kinetics of Droplets.. [PMID: 35923308 PMCID: PMC9347275 DOI: 10.1101/2022.07.26.501658] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Efficient spread of respiratory viruses requires the virus to maintain infectivity in the environment. Environmental stability of viruses can be influenced by many factors, including temperature and humidity. Our study measured the impact of initial droplet volume (50, 5, and 1 µL) and relative humidity (RH: 40%, 65%, and 85%) on the stability of influenza A virus, bacteriophage, Phi6, a common surrogate for enveloped viruses, and SARS-CoV-2 under a limited set of conditions. Our data suggest that the drying time required for the droplets to reach quasi-equilibrium (i.e. a plateau in mass) varied with RH and initial droplet volume. The macroscale physical characteristics of the droplets at quasi-equilibrium varied with RH but not with initial droplet volume. We observed more rapid virus decay when the droplets were still wet and undergoing evaporation, and slower decay after the droplets had dried. Initial droplet volume had a major effect on virus viability over the first few hours; whereby the decay rate of influenza virus was faster in smaller droplets. In general, influenza virus and SARS-CoV-2 decayed similarly. Overall, this study suggests that virus decay in media is closely correlated with the extent of droplet evaporation, which is controlled by RH. Taken together, these data suggest that decay of different viruses is more similar at higher RH and in smaller droplets and is distinct at lower RH and in larger droplets. Importantly, accurate assessment of transmission risk requires use of physiologically relevant droplet volumes and careful consideration of the use of surrogates.

Funding

National Institute of Allergy and Infectious Diseases, National Institute of Neurological Disorders and Stroke, National Institutes of Health; Department of Health and Human Services; Flu Lab.

Importance

During the COVID-19 pandemic, policy decisions were being driven by virus stability experiments involving SARS-CoV-2 applied to surfaces in large droplets at various humidity conditions. The results of our study indicate that determination of half-lives for emerging pathogens in large droplets likely over-estimates transmission risk for contaminated surfaces, as occurred during the COVID-19 pandemic. Our study implicates the need for the use of physiologically relevant droplet sizes with use of relevant surrogates in addition to what is already known about the importance of physiologically relevant media for risk assessment of future emerging pathogens.

Routine Decontamination of Surfaces Relevant to Working Dogs: Neutralization of Superficial Coronavirus Contamination

Given the increased deployment of working dogs to settings with pathogenic biological agents, a safe, effective, and logistically feasible surface decontamination protocol is essential to protect both the animals and their human handlers. Our group previously found that superficial contamination on surfaces relevant to the working dog community, including leashes and toys, could be significantly reduced using a standardized wiping protocol with various cleansing products. To expand upon this work, we analyzed the ability of this protocol to decontaminate surface-deposited bovine coronavirus, which was used as a BSL2 surrogate for SARS-CoV-2. Unsurprisingly, the physical characteristics of a given surface, including porosity and texture, had a significant effect on the ability to recover viable virus remaining on the surface post treatment. After correcting for these differences, however, wiping with 70% isopropyl alcohol (IPA) and 0.5% chlorhexidine performed best, reducing viral titers by >3 log on plastic bumper toys and nylon collars, and by >2 log on rubber toys and tennis balls. Leather leashes and Velcro proved more difficult to decontaminate, but both still showed significant loss of viral contamination following wiping with IPA or chlorhexidine. This work (i) validates the utility of a simple protocol for the neutralization of viruses on several surfaces, (ii) identifies materials that are more difficult to decontaminate, which should, thus, be considered for removal from field use, and (iii) highlights the need for further development of protocols testing porous or textured surfaces.

Antiviral Activity and Mechanisms of Seaweeds Bioactive Compounds on Enveloped Viruses-A Review

In the last decades, the interest in seaweed has significantly increased. Bioactive compounds from seaweed’s currently receive major attention from pharmaceutical companies as they express several interesting biological activities which are beneficial for humans. The structural diversity of seaweed metabolites provides diverse biological activities which are expressed through diverse mechanisms of actions. This review mainly focuses on the antiviral activity of seaweed’s extracts, highlighting the mechanisms of actions of some seaweed molecules against infection caused by different types of enveloped viruses: influenza, Lentivirus (HIV-1), Herpes viruses, and coronaviruses. Seaweed metabolites with antiviral properties can act trough different pathways by increasing the host’s defense system or through targeting and blocking virus replication before it enters host cells. Several studies have already established the large antiviral spectrum of seaweed’s bioactive compounds. Throughout this review, antiviral mechanisms and medical applications of seaweed’s bioactive compounds are analyzed, suggesting seaweed’s potential source of antiviral compounds for the formulation of novel and natural antiviral drugs.

Antimicrobial polymeric composites for high-touch surfaces in healthcare applications

Antimicrobial polymer composites have long been utilized in the healthcare field as part of the first line of defense. These composites are desirable in that they pose a minimal risk of developing contagions with antibiotic resistance. For this reason, the field of antimicrobial composites has seen steady growth over recent years and is becoming increasingly important during the current COVID-19 pandemic. In this article, we first review the need of the antimicrobial polymers in high tough surfaces, the antimicrobial mechanism, and then the recent advances in the development of antimicrobial polymer composite including the utilization of intrinsic antimicrobial polymers, the addition of antimicrobial additives, and new exploration of surface patterning. While there are many established and developing methods of imbuing a material with antimicrobial activity, there currently is no standard quantification method for these properties leading to difficulty comparing the efficacy of these materials within the literature. A discussion of the common antimicrobial characterization methods is provided along with highlights on the need of a standardized quantification of antiviral and antibacterial properties in testing to allow ease of comparison between generated libraries and to facilitate proper screening. We also discuss and comment on the current trends of the development of antimicrobial polymer composites with long-lasting and specific antimicrobial activities, nontoxic properties, and environmental friendliness against a broad-spectrum of microbes.

Stability of enveloped and nonenveloped viruses in hydrolyzed gelatin liquid formulation

BACKGROUND

The thermal stability of viruses in gelatin liquid formulations for medical research and application is poorly understood and this study aimed to examine the thermal stability of 4 enveloped and nonenveloped DNA and RNA viruses in hydrolyzed gelatin liquid formulations.

METHODS

Bovine herpesvirus (BHV) was used as a model virus to examine the molecular weight (MW), concentration and gelatin type and to optimize virus stability in liquid formulations at 25 °C and 4 °C. Using the model virus liquid formulation, the stability of multiple enveloped and nonenveloped RNA and DNA viruses, including parainfluenza virus, reovirus (RV), BHV, and adenovirus (AdV), was monitored over up to a 30-week storage period.

RESULTS

The BHV model virus was considered stable after 3 weeks in hydrolyzed gelatin (MW: 4000) with a 0.8 LRV (log10 reduction value) at 25 °C or a 0.2 LRV at 4 °C, compared to the stabilities observed in higher MW gelatin (60,000 and 160,000) with an LRV above 1. Based on the gelatin type, BHV in alkaline-treated hydrolyzed gelatin samples were unexpectantly more stable than in acid-treated hydrolyzed gelatin sample. All four viruses exhibited stability at 4 °C for at least 8 weeks, BHV or AdV remained stable for over 30 weeks of storage, and at 25 °C, AdV and RV remained stable for 8 weeks.

CONCLUSION

The results demonstrated that 5% of 4000 MW hydrolyzed gelatin formulation can act as a relevant stabilizer for the thermal stability of viruses in medical research and application.

Design strategies for antiviral coatings and surfaces: A review☆

The routine disinfection and sanitization of surfaces, objects, and textiles has become a time-consuming but necessary task for managing the COVID-19 pandemic. Nonetheless, the excessive use of sanitizers and disinfectants promotes the development of antibiotic-resistant microbes. Moreover, that improper disinfection could lead to more virus transfer, which leads to more viral mutations. Recently developed antiviral surface coatings can reduce the reliance on traditional disinfectants. These surfaces remain actively antimicrobial between periods of active cleaning of the surfaces, allowing a much more limited and optimized use of disinfectants. The novel nature of these surfaces has led, however, to many inconsistencies within the rapidly growing literature. Here we provide tools to guide the design and development of antimicrobial and antiviral surfaces and coatings. We describe how engineers can best choose testing options and propose new avenues for antiviral testing. After defining testing protocols, we summarize potential inorganic and organic materials able to serve as antiviral surfaces and present their antiviral mechanisms. We discuss the main limitations to their application, including issues related to toxicity, antimicrobial resistance, and environmental concerns. We propose solutions to counter these limitations and highlight how the context of specific use of an antiviral surface must guide material selection. Finally, we discuss how the use of coatings that combine multiple antimicrobial mechanisms can avoid the development of antibiotic resistance and improve the antiviral properties of these surfaces.

Nanoparticle Engineered Photocatalytic Paints: A Roadmap to Self-Sterilizing against the Spread of Communicable Diseases

Applications of visible-light photocatalytic engineered nanomaterials in the preparation of smart paints are of recent origin. The authors have revealed a great potential of these new paints for self-sterilizing of the surfaces in hospitals and public places simply with visible light exposure and this is reported for the first time in this review. A recent example of a communicable disease such as COVID-19 is considered. With all precautions and preventions taken as suggested by the World Health Organization (WHO), COVID-19 has remained present for a longer time compared to other diseases. It has affected millions of people worldwide and the significant challenge remains of preventing infections due to SARS-CoV-2. The present review is focused on revealing the cause of this widespread disease and suggests a roadmap to control the spread of disease. It is understood that the transmission of SARS-CoV-2 virus takes place through contact surfaces such as doorknobs, packaging and handrails, which may be responsible for many preventable and nosocomial infections. In addition, due to the potent transmissibility of SARS-CoV-2, its ability to survive for longer periods on common touch surfaces is also an important reason for the spread of COVID-19. The existing antimicrobial cleaning technologies used in hospitals are not suitable, viable or economical to keep public places free from such infections. Hence, in this review, an innovative approach of coating surfaces in public places with visible-light photocatalytic nanocomposite paints has been suggested as a roadmap to self-sterilizing against the spread of communicable diseases. The formulations of different nanoparticle engineered photocatalytic paints with their ability to destroy pathogens using visible light, alongwith the field trials are also summarized and reported in this review. The potential suggestions for controlling the spread of communicable diseases are also listed at the end of the review.